You are not logged in.
This started yesterday - I'd configured networkmanager for my wifi and everything seemed to be going smoothly, but after shutting down my laptop for the night and powering it on again, I'm no longer able to get out to the internet. I'm getting an IP address from the router, but I can't ping the gateway (i can ping localhost). I've tried reinstalling network manager, but that doesn't seem to help, and dhcpcd is disabled. In fact, as soon as I connect an ethernet cable everything works fine - really not sure where to look now, any thoughts?
Thanks,
Ulaume
Last edited by ulaume (2018-05-05 02:34:41)
Offline
There's a few questions that when answered may help in troubleshooting. What IP, subnet mask, and gateway settings do you get while on wifi? Same question while on a wired connection? What's the LAN address of the gateway? it's a bit confusing, you say you get an IP from the router while on wifi, yet dhcpd is disabled? That seems strange.
"Oh, they have the internet on computers now."
Offline
I'm getting the same IP, netmask and gateway as on wired. Here are some of the outputs i'm looking at, something wrong with my wireless profile? Not entirely sure what the meaning of these issues are..
systemctl list-units | grep -iE '(net|dhcp|wpa|conn|wicd)' (looks like there's an error on the wireless adapter - will post journalctl ourput below)
sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d4-3\x2d4:1.0-net-wwp0s20u4.device loaded active plugged Sierra Wireless Gobi 3000 Modem device (MC8355)
sys-devices-pci0000:00-0000:00:19.0-net-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection (Lewisville)
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlp3s0.device loaded active plugged Centrino Advanced-N 6205 [Taylor Peak] (Centrino Advanced-N 6205 (802.11a/b/g/n))
sys-subsystem-net-devices-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection (Lewisville)
sys-subsystem-net-devices-wlp3s0.device loaded active plugged Centrino Advanced-N 6205 [Taylor Peak] (Centrino Advanced-N 6205 (802.11a/b/g/n))
sys-subsystem-net-devices-wwp0s20u4.device loaded active plugged Sierra Wireless Gobi 3000 Modem device (MC8355)
* netctl@wlp3s0\x2dDeckard.service loaded failed failed Networking for netctl profile wlp3s0-Deckard
NetworkManager.service loaded active running Network Manager
wpa_supplicant.service loaded active running WPA supplicant
system-netctl.slice loaded active active system-netctl.slice
network.target loaded active active Network
systemctl status NetworkManager
NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; disabled; vendor preset: disabled)
Drop-In: /usr/lib/systemd/system/NetworkManager.service.d `-NetworkManager-ovs.conf
Active: active (running) since Fri 2018-05-04 20:33:35 EDT; 18min ago
Docs: man:NetworkManager(8)
Main PID: 1748 (NetworkManager)
Tasks: 3 (limit: 4915)
Memory: 5.8M
CGroup: /system.slice/NetworkManager.service `-1748 /usr/bin/NetworkManager --no-daemon
systemctl status netctl@wlp3s0\x2dDeckard.service
* netctl@wlp3s0x2dDeckard.service - Networking for netctl profile wlp3s0x2dDeckard
Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static; vendor preset: disabled)
Active: inactive (dead)
Docs: man:netctl.profile(5)
journalctl -xe
-- Unit netctl@wlp3s0x2dDeckard.service has begun starting up.
May 04 20:54:32 thinkarch network[2260]: Profile 'wlp3s0x2dDeckard' does not exist or is not readable
May 04 20:54:32 thinkarch systemd[1]: netctl@wlp3s0x2dDeckard.service: Main process exited, code=exited, status=1/FAILURE
May 04 20:54:32 thinkarch systemd[1]: netctl@wlp3s0x2dDeckard.service: Failed with result 'exit-code'.
May 04 20:54:32 thinkarch systemd[1]: Failed to start Networking for netctl profile wlp3s0x2dDeckard.
-- Subject: Unit netctl@wlp3s0x2dDeckard.service has failed
-- Defined-By: systemd
-- Support: [url]https://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
--
-- Unit netctl@wlp3s0x2dDeckard.service has failed.Last edited by ulaume (2018-05-05 02:07:42)
Offline
Read the Code of Conduct and use code tags when you paste here: https://wiki.archlinux.org/index.php/Co … s_and_code
And choose one service to manage your network.
Offline
Thank you, i should have looked up the tags first - i've fixed my initial post. Secondly, I'm only using network manager, nothing else.
Offline
You also have netctl running... Disable that if you aren't using it.
Offline
Then why is netctl enabled?
Offline
I was just able to get it going again by re-installing wpa_supplicant actually - I'd done this once before, when re-installing networkmanager, but this time it appears to have worked. Doesn't offer much for a root cause, but at least it's going now.
Offline
also, i didn't realize i was using netctl - it doesn't appear to be enabled in either case.
* netctl.service - (Re)store the netctl profile state
Loaded: loaded (/usr/lib/systemd/system/netctl.service; disabled; vendor preset: disabled)
Active: inactive (dead)
Docs: man:netctl.special(7)Offline
Does your wired connection have a static IP? That might conflict with the Wifi having the same IP when the WiFi connection is active. Even when the Ethernet cable isn’t plugged in. Also yea, go with only one network manager. Per https://wiki.archlinux.org/index.php/Network_manager they are mutually exclusive.
"Oh, they have the internet on computers now."
Offline
systemctl list-unit-files --state=enabledOffline
I was only on wired so I could post on the forums, it wasn't a conflicting IP address in the end. And to satisfy your curiosity Anarchist, here's the output you're looking for:
UNIT FILE STATE
autovt@.service enabled
dbus-fi.w1.wpa_supplicant1.service enabled
getty@.service enabled
tlp-sleep.service enabled
tlp.service enabled
wpa_supplicant.service enabled
remote-fs.target enabledOffline
Offline