You are not logged in.

Pages: 1

#1 2018-05-15 19:26:32

ad4ms3
Member
From: Bradford, UK
Registered: 2018-01-19
Posts: 95

Unable to load system with 20-intel.conf

Hi all, I am having problem with file above. I was following wiki, but must have done something wrong.
So, there is a screen tearing when picture goes fast, e.g scrolling websites, or any other text.
Arch is running on HP Pavilion G6 2142sa with Intel gpu. 

# nano /etc/X11/xorg.conf.d/20-intel.conf

Into this following statement is placedi:

Section "Device"
  Identifier  "Intel Graphics"
  Driver      "intel"
 Option "TearFree" "true"
 Option "AccelMethod" 'sna"
EndSection

Only cursor was blinking when I restarted system. Wifi was activated (orange led turned to white) but xfce did not load.
Following this I added  i915 and intel_agp to the initramfs as per wiki:

# nano /etc/mkinitcpio.conf
MODULES=(intel_agp i915)
# mkinitcpio -p linux

This is exactly as I did, step by step and system will not load.
Mesa is installed, I did not install xf86-video-intel as not recommended.
Thank you

Offline

#2 2018-05-15 19:43:41

loqs
Member
Registered: 2014-03-06
Posts: 19,113

Re: Unable to load system with 20-intel.conf

Switch to another terminal with Ctrl+Alt+F2 then rename 20-intel.conf  to anything without a .conf extension and restart X.
What is starting X on boot?
Edit:

 Option "AccelMethod" 'sna"

Mixing single and double quotes.

Last edited by loqs (2018-05-15 19:57:12)

Offline

#3 2018-05-15 20:22:52

ad4ms3
Member
From: Bradford, UK
Registered: 2018-01-19
Posts: 95

Re: Unable to load system with 20-intel.conf

loqs wrote:

Mixing single and double quotes.

I can't believe it! Glad you spotted it:)
Well, I did it and system fully loads, however I am not entirely sure problem is gone. Still can see tearing on upper half when scrolling up and on lower half when scrolling down. It does not look sinister though.
LXDM is my display manager.

Last edited by ad4ms3 (2018-05-15 20:29:20)

Offline

#4 2018-05-15 20:37:07

loqs
Member
Registered: 2014-03-06
Posts: 19,113

Re: Unable to load system with 20-intel.conf

You can also use Systemd#Change_default_target_to_boot_into to prevent display managers from loading.
If you are not using xf86-video-intel why are you using a config specifying it and options specific to that driver?
What is the contents of xorg.log?

Offline

#5 2018-05-16 05:57:18

ad4ms3
Member
From: Bradford, UK
Registered: 2018-01-19
Posts: 95

Re: Unable to load system with 20-intel.conf

loqs wrote:

If you are not using xf86-video-intel why are you using a config specifying it and options specific to that driver?

Cause wiki did not specify that such config is for xf86 driver. 

[    17.393] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    17.394] X Protocol Version 11, Revision 0
[    17.394] Build Operating System: Linux 4.15.6-1-ARCH x86_64 
[    17.394] Current Operating System: Linux archlinux 4.14.40-1-lts #1 SMP Wed May 9 13:00:32 CEST 2018 x86_64
[    17.394] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d9240d67-6aa9-43e5-85ab-e3474f488f1f rw quiet
[    17.394] Build Date: 12 April 2018  05:31:07AM
[    17.394]  
[    17.394] Current version of pixman: 0.34.0
[    17.394] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    17.394] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.394] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 16 06:48:55 2018
[    17.830] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    17.878] (==) No Layout section.  Using the first Screen section.
[    17.878] (==) No screen section available. Using defaults.
[    17.878] (**) |-->Screen "Default Screen Section" (0)
[    17.878] (**) |   |-->Monitor "<default monitor>"
[    17.940] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    17.940] (==) Automatically adding devices
[    17.940] (==) Automatically enabling devices
[    17.940] (==) Automatically adding GPU devices
[    17.940] (==) Automatically binding GPU devices
[    17.940] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    17.993] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[    17.993] 	Entry deleted from font path.
[    17.993] 	(Run 'mkfontdir' on "/usr/share/fonts/misc/").
[    18.041] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    18.042] 	Entry deleted from font path.
[    18.042] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    18.042] 	Entry deleted from font path.
[    18.172] (==) FontPath set to:
	/usr/share/fonts/TTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    18.172] (==) ModulePath set to "/usr/lib/xorg/modules"
[    18.172] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.190] (II) Loader magic: 0x564cfbec9d60
[    18.190] (II) Module ABI versions:
[    18.190] 	X.Org ANSI C Emulation: 0.4
[    18.190] 	X.Org Video Driver: 23.0
[    18.190] 	X.Org XInput driver : 24.1
[    18.190] 	X.Org Server Extension : 10.0
[    18.191] (++) using VT number 1

[    18.192] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    18.193] (II) xfree86: Adding drm device (/dev/dri/card0)
[    18.211] (--) PCI:*(0:0:2:0) 8086:0106:103c:1841 rev 9, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[    18.211] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    18.211] (II) LoadModule: "glx"
[    18.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.687] (II) Module glx: vendor="X.Org Foundation"
[    18.687] 	compiled for 1.19.6, module version = 1.0.0
[    18.687] 	ABI class: X.Org Server Extension, version 10.0
[    18.687] (==) Matched intel as autoconfigured driver 0
[    18.688] (==) Matched intel as autoconfigured driver 1
[    18.688] (==) Matched modesetting as autoconfigured driver 2
[    18.688] (==) Matched fbdev as autoconfigured driver 3
[    18.688] (==) Matched vesa as autoconfigured driver 4
[    18.688] (==) Assigned the driver to the xf86ConfigLayout
[    18.688] (II) LoadModule: "intel"
[    18.712] (WW) Warning, couldn't open module intel
[    18.712] (II) UnloadModule: "intel"
[    18.712] (II) Unloading intel
[    18.712] (EE) Failed to load module "intel" (module does not exist, 0)
[    18.712] (II) LoadModule: "modesetting"
[    18.713] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.764] (II) Module modesetting: vendor="X.Org Foundation"
[    18.764] 	compiled for 1.19.6, module version = 1.19.6
[    18.764] 	Module class: X.Org Video Driver
[    18.764] 	ABI class: X.Org Video Driver, version 23.0
[    18.764] (II) LoadModule: "fbdev"
[    18.764] (WW) Warning, couldn't open module fbdev
[    18.764] (II) UnloadModule: "fbdev"
[    18.764] (II) Unloading fbdev
[    18.764] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    18.764] (II) LoadModule: "vesa"
[    18.764] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    18.821] (II) Module vesa: vendor="X.Org Foundation"
[    18.821] 	compiled for 1.19.6, module version = 2.4.0
[    18.821] 	Module class: X.Org Video Driver
[    18.821] 	ABI class: X.Org Video Driver, version 23.0
[    18.821] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    18.821] (II) VESA: driver for VESA chipsets: vesa
[    18.825] (II) modeset(0): using drv /dev/dri/card0
[    18.825] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    18.825] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    18.825] (==) modeset(0): RGB weight 888
[    18.825] (==) modeset(0): Default visual is TrueColor
[    18.825] (II) Loading sub module "glamoregl"
[    18.825] (II) LoadModule: "glamoregl"
[    18.825] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    19.328] (II) Module glamoregl: vendor="X.Org Foundation"
[    19.328] 	compiled for 1.19.6, module version = 1.0.0
[    19.328] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    19.328] (II) glamor: OpenGL accelerated X.org driver based.
[    22.209] (II) glamor: EGL version 1.4 (DRI2):
[    22.589] (II) modeset(0): glamor initialized
[    22.589] (II) modeset(0): Output LVDS-1 has no monitor section
[    22.594] (II) modeset(0): Output VGA-1 has no monitor section
[    22.603] (II) modeset(0): Output HDMI-1 has no monitor section
[    22.603] (II) modeset(0): Output DP-1 has no monitor section
[    22.603] (II) modeset(0): EDID for output LVDS-1
[    22.603] (II) modeset(0): Manufacturer: LGD  Model: 2f2  Serial#: 0
[    22.603] (II) modeset(0): Year: 2011  Week: 0
[    22.603] (II) modeset(0): EDID Version: 1.4
[    22.603] (II) modeset(0): Digital Display Input
[    22.603] (II) modeset(0): 6 bits per channel
[    22.603] (II) modeset(0): Digital interface is undefined
[    22.603] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    22.603] (II) modeset(0): Gamma: 2.20
[    22.603] (II) modeset(0): No DPMS capabilities specified
[    22.603] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    22.603] (II) modeset(0): First detailed timing is preferred mode
[    22.603] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    22.603] (II) modeset(0): redX: 0.605 redY: 0.355   greenX: 0.329 greenY: 0.579
[    22.603] (II) modeset(0): blueX: 0.150 blueY: 0.055   whiteX: 0.313 whiteY: 0.329
[    22.603] (II) modeset(0): Manufacturer's mask: 0
[    22.603] (II) modeset(0): Supported detailed timing:
[    22.603] (II) modeset(0): clock: 76.3 MHz   Image Size:  344 x 194 mm
[    22.603] (II) modeset(0): h_active: 1366  h_sync: 1402  h_sync_end 1442 h_blank_end 1610 h_border: 0
[    22.603] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    22.603] (II) modeset(0): Supported detailed timing:
[    22.603] (II) modeset(0): clock: 50.9 MHz   Image Size:  344 x 194 mm
[    22.603] (II) modeset(0): h_active: 1366  h_sync: 1402  h_sync_end 1442 h_blank_end 1610 h_border: 0
[    22.603] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    22.603] (II) modeset(0): Unknown vendor-specific block 2
[    22.603] (II) modeset(0): EDID (in hex):
[    22.603] (II) modeset(0): 	00ffffffffffff0030e4f20200000000
[    22.603] (II) modeset(0): 	00150104902213780a05859b5b549426
[    22.603] (II) modeset(0): 	0e505400000001010101010101010101
[    22.603] (II) modeset(0): 	010101010101ce1d56f4500016302428
[    22.603] (II) modeset(0): 	350058c210000019df1356f450001630
[    22.603] (II) modeset(0): 	2428350058c210000019000000000000
[    22.603] (II) modeset(0): 	00000000000000000000000000000002
[    22.603] (II) modeset(0): 	000c4cff0a3c641b131f640000000074
[    22.604] (II) modeset(0): Printing probed modes for output LVDS-1
[    22.604] (II) modeset(0): Modeline "1366x768"x60.0   76.30  1366 1402 1442 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    22.604] (II) modeset(0): Modeline "1366x768"x40.0   50.87  1366 1402 1442 1610  768 771 776 790 -hsync -vsync (31.6 kHz e)
[    22.604] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    22.604] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    22.604] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    22.604] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    22.604] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    22.604] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    22.604] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    22.604] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    22.604] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    22.604] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    22.604] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    22.604] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    22.604] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    22.604] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    22.604] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    22.604] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    22.604] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    22.604] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    22.604] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    22.604] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    22.604] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    22.604] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    22.604] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    22.604] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    22.604] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    22.604] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    22.604] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    22.604] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    22.604] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    22.604] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    22.604] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    22.604] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    22.604] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    22.604] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    22.604] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    22.604] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    22.604] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    22.604] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    22.604] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    22.604] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    22.604] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    22.604] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    22.604] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    22.604] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    22.604] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    22.604] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    22.604] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    22.604] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    22.604] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    22.604] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    22.604] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    22.604] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    22.604] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    22.604] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    22.604] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    22.604] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    22.604] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    22.604] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    22.609] (II) modeset(0): EDID for output VGA-1
[    22.618] (II) modeset(0): EDID for output HDMI-1
[    22.618] (II) modeset(0): EDID for output DP-1
[    22.618] (II) modeset(0): Output LVDS-1 connected
[    22.618] (II) modeset(0): Output VGA-1 disconnected
[    22.618] (II) modeset(0): Output HDMI-1 disconnected
[    22.618] (II) modeset(0): Output DP-1 disconnected
[    22.618] (II) modeset(0): Using exact sizes for initial modes
[    22.618] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    22.618] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    22.618] (==) modeset(0): DPI set to (96, 96)
[    22.618] (II) Loading sub module "fb"
[    22.618] (II) LoadModule: "fb"
[    22.618] (II) Loading /usr/lib/xorg/modules/libfb.so
[    22.714] (II) Module fb: vendor="X.Org Foundation"
[    22.714] 	compiled for 1.19.6, module version = 1.0.0
[    22.714] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    22.714] (II) UnloadModule: "vesa"
[    22.714] (II) Unloading vesa
[    22.714] (==) Depth 24 pixmap format is 32 bpp
[    23.100] (==) modeset(0): Backing store enabled
[    23.100] (==) modeset(0): Silken mouse enabled
[    23.112] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    23.142] (==) modeset(0): DPMS enabled
[    23.142] (II) modeset(0): [DRI2] Setup complete
[    23.142] (II) modeset(0): [DRI2]   DRI driver: i965
[    23.142] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    23.142] (--) RandR disabled
[    23.170] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.170] (II) AIGLX: enabled GLX_ARB_create_context
[    23.170] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    23.170] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    23.170] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.170] (II) AIGLX: enabled GLX_SGI_swap_control
[    23.170] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    23.170] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    23.170] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    23.170] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.170] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    23.171] (II) AIGLX: Loaded and initialized i965
[    23.171] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.206] (II) modeset(0): Damage tracking initialized
[    23.207] (II) modeset(0): Setting screen physical size to 361 x 203
[    23.794] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    23.794] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    23.794] (II) LoadModule: "libinput"
[    23.794] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    23.885] (II) Module libinput: vendor="X.Org Foundation"
[    23.886] 	compiled for 1.19.6, module version = 0.27.1
[    23.886] 	Module class: X.Org XInput Driver
[    23.886] 	ABI class: X.Org XInput driver, version 24.1
[    23.886] (II) Using input driver 'libinput' for 'Power Button'
[    23.886] (**) Power Button: always reports core events
[    23.886] (**) Option "Device" "/dev/input/event3"
[    23.886] (**) Option "_source" "server/udev"
[    23.886] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    23.886] (II) event3  - Power Button: device is a keyboard
[    23.886] (II) event3  - Power Button: device removed
[    23.920] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[    23.920] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.920] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    23.920] (II) event3  - Power Button: device is a keyboard
[    23.921] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    23.921] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    23.921] (II) Using input driver 'libinput' for 'Video Bus'
[    23.921] (**) Video Bus: always reports core events
[    23.921] (**) Option "Device" "/dev/input/event7"
[    23.921] (**) Option "_source" "server/udev"
[    23.921] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    23.921] (II) event7  - Video Bus: device is a keyboard
[    23.921] (II) event7  - Video Bus: device removed
[    23.990] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[    23.990] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    23.990] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    23.990] (II) event7  - Video Bus: device is a keyboard
[    23.991] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    23.991] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    23.991] (II) Using input driver 'libinput' for 'Power Button'
[    23.991] (**) Power Button: always reports core events
[    23.991] (**) Option "Device" "/dev/input/event2"
[    23.991] (**) Option "_source" "server/udev"
[    23.991] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    23.991] (II) event2  - Power Button: device is a keyboard
[    23.991] (II) event2  - Power Button: device removed
[    24.010] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    24.010] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    24.011] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    24.011] (II) event2  - Power Button: device is a keyboard
[    24.011] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    24.011] (II) No input driver specified, ignoring this device.
[    24.011] (II) This device may have been added with another device file.
[    24.012] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[    24.012] (II) No input driver specified, ignoring this device.
[    24.012] (II) This device may have been added with another device file.
[    24.012] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[    24.012] (II) No input driver specified, ignoring this device.
[    24.012] (II) This device may have been added with another device file.
[    24.012] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    24.013] (II) No input driver specified, ignoring this device.
[    24.013] (II) This device may have been added with another device file.
[    24.013] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    24.013] (II) No input driver specified, ignoring this device.
[    24.013] (II) This device may have been added with another device file.
[    24.013] (II) config/udev: Adding input device HP Webcam-50: HP Webcam-50 (/dev/input/event10)
[    24.013] (**) HP Webcam-50: HP Webcam-50: Applying InputClass "libinput keyboard catchall"
[    24.013] (II) Using input driver 'libinput' for 'HP Webcam-50: HP Webcam-50'
[    24.013] (**) HP Webcam-50: HP Webcam-50: always reports core events
[    24.013] (**) Option "Device" "/dev/input/event10"
[    24.014] (**) Option "_source" "server/udev"
[    24.014] (II) event10 - HP Webcam-50: HP Webcam-50: is tagged by udev as: Keyboard
[    24.014] (II) event10 - HP Webcam-50: HP Webcam-50: device is a keyboard
[    24.014] (II) event10 - HP Webcam-50: HP Webcam-50: device removed
[    24.100] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input11/event10"
[    24.100] (II) XINPUT: Adding extended input device "HP Webcam-50: HP Webcam-50" (type: KEYBOARD, id 9)
[    24.100] (II) event10 - HP Webcam-50: HP Webcam-50: is tagged by udev as: Keyboard
[    24.100] (II) event10 - HP Webcam-50: HP Webcam-50: device is a keyboard
[    24.101] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    24.101] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    24.101] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    24.101] (**) AT Translated Set 2 keyboard: always reports core events
[    24.101] (**) Option "Device" "/dev/input/event0"
[    24.101] (**) Option "_source" "server/udev"
[    24.102] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    24.102] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    24.102] (II) event0  - AT Translated Set 2 keyboard: device removed
[    24.120] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    24.120] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    24.121] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    24.121] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    24.121] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[    24.121] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    24.121] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    24.121] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.121] (**) Option "Device" "/dev/input/event9"
[    24.121] (**) Option "_source" "server/udev"
[    24.122] (II) event9  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    24.122] (II) event9  - SynPS/2 Synaptics TouchPad: device is a touchpad
[    24.122] (II) event9  - SynPS/2 Synaptics TouchPad: device removed
[    24.170] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event9"
[    24.170] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    24.170] (**) Option "AccelerationScheme" "none"
[    24.170] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    24.170] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    24.170] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    24.171] (II) event9  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    24.171] (II) event9  - SynPS/2 Synaptics TouchPad: device is a touchpad
[    24.171] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    24.171] (II) No input driver specified, ignoring this device.
[    24.171] (II) This device may have been added with another device file.
[    24.171] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[    24.171] (II) No input driver specified, ignoring this device.
[    24.171] (II) This device may have been added with another device file.
[    24.172] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    24.172] (II) No input driver specified, ignoring this device.
[    24.172] (II) This device may have been added with another device file.
[    24.172] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    24.172] (II) No input driver specified, ignoring this device.
[    24.172] (II) This device may have been added with another device file.
[    24.173] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[    24.173] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    24.173] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    24.173] (**) HP WMI hotkeys: always reports core events
[    24.173] (**) Option "Device" "/dev/input/event8"
[    24.173] (**) Option "_source" "server/udev"
[    24.173] (II) event8  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    24.173] (II) event8  - HP WMI hotkeys: device is a keyboard
[    24.173] (II) event8  - HP WMI hotkeys: device removed
[    24.240] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[    24.240] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[    24.240] (II) event8  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    24.240] (II) event8  - HP WMI hotkeys: device is a keyboard
[    24.241] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4)
[    24.241] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[    24.241] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[    24.241] (**) HP Wireless hotkeys: always reports core events
[    24.241] (**) Option "Device" "/dev/input/event4"
[    24.241] (**) Option "_source" "server/udev"
[    24.241] (II) event4  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[    24.241] (II) event4  - HP Wireless hotkeys: device is a keyboard
[    24.241] (II) event4  - HP Wireless hotkeys: device removed
[    24.300] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event4"
[    24.300] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 13)
[    24.300] (II) event4  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[    24.300] (II) event4  - HP Wireless hotkeys: device is a keyboard
[    42.856] (II) modeset(0): EDID vendor "LGD", prod id 754
[    42.856] (II) modeset(0): Printing DDC gathered Modelines:
[    42.856] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1402 1442 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    42.856] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1402 1442 1610  768 771 776 790 -hsync -vsync (31.6 kHz e)
[    43.203] (II) modeset(0): EDID vendor "LGD", prod id 754
[    43.203] (II) modeset(0): Printing DDC gathered Modelines:
[    43.203] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1402 1442 1610  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    43.203] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1402 1442 1610  768 771 776 790 -hsync -vsync (31.6 kHz e)

Offline

Pages: 1

Board footer

Powered by FluxBB