You are not logged in.
Aloha,
I am currently on the brink of madness because I installed Arch many times on this exact Computer before without ever getting a Problem with grub.
The boot_mode in my bios is set to Legacy + UEFI
After using using pacstrap /mnt base I used arch-chroot /mnt and then instantly downloaded grub via pacman -S grub-bios (There is also the option of only typing grub instead of grub-bios but it seems to be the same thing).
The next step I usually do differs from what many people do I think since I only type "grub-install /dev/sda" I've seen other people type out longer commands but since that always work I tried it as well today.
I then get Grub: Error: Cannot find EFI directory
I don't get why I would get that error now after literally installing Arch over and over for practice like a month ago...
Regards and sorry if I forgot to post important information
<3 Belph
Last edited by Belph (2019-01-05 19:38:55)
Offline
Is your disk using a dos partiton table or gpt?
Did you try this:
https://wiki.archlinux.org/index.php/GRUB#UEFI_systems
Offline
Is your disk using a dos partiton table or gpt?
Did you try this:
https://wiki.archlinux.org/index.php/GRUB#UEFI_systems
It was set to "loop" but now I was able to set it to gpt by using mkfs /dev/sda
I still get the same error. I also don't have a little partition with FAT32 format on my list, when using parted /dev/sda print, I am actually having trouble creating one.
And I still don't get why I get this Problem now and didn't get it a month ago.
Offline
A month ago everything was the same? Is the system booting in EFI or BIOS mode?
Offline
A month ago everything was the same? Is the system booting in EFI or BIOS mode?
UEFI
Offline
What is the output of `parted -l` and `findmnt`
Offline
try to use dos partition table
Offline
zezu, while it is entirely possible to have an ESP on a disk with MBR (msdos) partition tables, it isn't generally very well supported, and it certainly isn't what the ArchWiki recommends. If you have a good reason for suggesting that Belph switch to a MBR partition table, please share it, otherwise please don't make random suggestions which will only serve to confuse the matter.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
I also don't have a little partition with FAT32 format on my list
If your system is booting in UEFI mode, you will have to have a partition with FAT32 for the EFI partition.
Offline
I thought I succeeded in changing the partition table to gpt but it still is loop. I would like to post the output to make it easier for you guys but I don't know how this works.
Offline
Offline
I thought I succeeded in changing the partition table to gpt but it still is loop. I would like to post the output to make it easier for you guys but I don't know how this works.
Btw, I've been using cfdisk to make the partitions and I just noticed that is says label: dos at the top of the fake GUI
Offline