You are not logged in.

#1 2018-05-04 17:45:02

whitesnow
Member
Registered: 2015-01-04
Posts: 52

Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Hi,

searching with google, there are already several topics about this controller.

But I did not find a solution up to now.

like this:

https://unix.stackexchange.com/question … rnel-param

So the problem, in the recent kernels linux 4.16.4-1, linux-lts 4.14.36-1 this controller is not working anymore.

I still have an older kernel: 4.6.2-1-ARCH #1 SMP PREEMPT Wed Jun 8 08:40:59 CEST 2016 x86_64 GNU/Linux, with this, that controller is working.

lspci -v
05:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02) (prog-if 30 [XHCI])
	Physical Slot: 1
	Flags: bus master, fast devsel, latency 0, IRQ 19
	Memory at f1c00000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
lsusb -v

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x8087 Intel Corp.
  idProduct          0x0024 Integrated Rate Matching Hub
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval              12

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

Bus 004 Device 002: ID 0bc2:61b7 Seagate RSS LLC Maxtor M3 Portable
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         9
  idVendor           0x0bc2 Seagate RSS LLC
  idProduct          0x61b7 Maxtor M3 Portable
  bcdDevice            0.00
  iManufacturer           2 
  iProduct                3 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          121
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              144mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           4
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     98 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
        MaxStreams             32
        Data-in pipe (0x03)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
        MaxStreams             32
        Data-out pipe (0x04)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
        MaxStreams             32
        Status pipe (0x02)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
        Command pipe (0x01)

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            4.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

Bus 001 Device 005: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP)
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x04f2 Chicony Electronics Co., Ltd
  idProduct          0xb217 Lenovo Integrated Camera (0.3MP)
  bcdDevice            8.54
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          800
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              200mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass         14 Video
      bFunctionSubClass       3 Video Interface Collection
      bFunctionProtocol       0 
      iFunction               4 
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      1 Video Control
      bInterfaceProtocol      0 
      iInterface              4 
      VideoControl Interface Descriptor:
        bLength                13
        bDescriptorType        36
        bDescriptorSubtype      1 (HEADER)
        bcdUVC               1.00
        wTotalLength           78
        dwClockFrequency       30.000000MHz
        bInCollection           1
        baInterfaceNr( 0)       1
      VideoControl Interface Descriptor:
        bLength                18
        bDescriptorType        36
        bDescriptorSubtype      2 (INPUT_TERMINAL)
        bTerminalID             1
        wTerminalType      0x0201 Camera Sensor
        bAssocTerminal          4
        iTerminal               0 
        wObjectiveFocalLengthMin      0
        wObjectiveFocalLengthMax      0
        wOcularFocalLength            0
        bControlSize                  3
        bmControls           0x00040a0e
          Auto-Exposure Mode
          Auto-Exposure Priority
          Exposure Time (Absolute)
          Zoom (Absolute)
          PanTilt (Absolute)
          Privacy
      VideoControl Interface Descriptor:
        bLength                11
        bDescriptorType        36
        bDescriptorSubtype      5 (PROCESSING_UNIT)
      Warning: Descriptor too short
        bUnitID                 2
        bSourceID               1
        wMaxMultiplier          0
        bControlSize            2
        bmControls     0x0000157f
          Brightness
          Contrast
          Hue
          Saturation
          Sharpness
          Gamma
          White Balance Temperature
          Backlight Compensation
          Power Line Frequency
          White Balance Temperature, Auto
        iProcessing             0 
        bmVideoStandards     0x1b
          None
          NTSC - 525/60
          SECAM - 625/50
          NTSC - 625/50
      VideoControl Interface Descriptor:
        bLength                27
        bDescriptorType        36
        bDescriptorSubtype      6 (EXTENSION_UNIT)
        bUnitID                 3
        guidExtensionCode         {74183e0a-5482-481a-b402-48b8b8c49cc8}
        bNumControl            11
        bNrPins                 1
        baSourceID( 0)          2
        bControlSize            2
        bmControls( 0)       0xff
        bmControls( 1)       0x07
        iExtension              0 
      VideoControl Interface Descriptor:
        bLength                 9
        bDescriptorType        36
        bDescriptorSubtype      3 (OUTPUT_TERMINAL)
        bTerminalID             4
        wTerminalType      0x0101 USB Streaming
        bAssocTerminal          0
        bSourceID               3
        iTerminal               0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval               8
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      VideoStreaming Interface Descriptor:
        bLength                            15
        bDescriptorType                    36
        bDescriptorSubtype                  1 (INPUT_HEADER)
        bNumFormats                         2
        wTotalLength                      563
        bEndPointAddress                  130
        bmInfo                              1
        bTerminalLink                       4
        bStillCaptureMethod                 1
        bTriggerSupport                     0
        bTriggerUsage                       0
        bControlSize                        1
        bmaControls( 0)                     0
        bmaControls( 1)                     0
      VideoStreaming Interface Descriptor:
        bLength                            27
        bDescriptorType                    36
        bDescriptorSubtype                  4 (FORMAT_UNCOMPRESSED)
        bFormatIndex                        1
        bNumFrameDescriptors                8
        guidFormat                            {32595559-0000-0010-8000-00aa00389b71}
        bBitsPerPixel                      16
        bDefaultFrameIndex                  1
        bAspectRatioX                       0
        bAspectRatioY                       0
        bmInterlaceFlags                 0x02
          Interlaced stream or variable: No
          Fields per frame: 1 fields
          Field 1 first: No
          Field pattern: Field 1 only
        bCopyProtect                        0
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         1
        bmCapabilities                   0x01
          Still image supported
        wWidth                            640
        wHeight                           480
        dwMinBitRate                 73728000
        dwMaxBitRate                147456000
        dwMaxVideoFrameBufferSize      614400
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         2
        bmCapabilities                   0x01
          Still image supported
        wWidth                            640
        wHeight                           360
        dwMinBitRate                 55296000
        dwMaxBitRate                110592000
        dwMaxVideoFrameBufferSize      460800
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         3
        bmCapabilities                   0x01
          Still image supported
        wWidth                            352
        wHeight                           288
        dwMinBitRate                 24330240
        dwMaxBitRate                 48660480
        dwMaxVideoFrameBufferSize      202752
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         4
        bmCapabilities                   0x01
          Still image supported
        wWidth                            320
        wHeight                           240
        dwMinBitRate                 18432000
        dwMaxBitRate                 36864000
        dwMaxVideoFrameBufferSize      153600
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                            30
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         5
        bmCapabilities                   0x01
          Still image supported
        wWidth                            800
        wHeight                           448
        dwMinBitRate                 86016000
        dwMaxBitRate                 86016000
        dwMaxVideoFrameBufferSize      716800
        dwDefaultFrameInterval         666666
        bFrameIntervalType                  1
        dwFrameInterval( 0)            666666
      VideoStreaming Interface Descriptor:
        bLength                            30
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         6
        bmCapabilities                   0x01
          Still image supported
        wWidth                            960
        wHeight                           544
        dwMinBitRate                 83558400
        dwMaxBitRate                 83558400
        dwMaxVideoFrameBufferSize     1044480
        dwDefaultFrameInterval        1000000
        bFrameIntervalType                  1
        dwFrameInterval( 0)           1000000
      VideoStreaming Interface Descriptor:
        bLength                            30
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         7
        bmCapabilities                   0x01
          Still image supported
        wWidth                           1280
        wHeight                           720
        dwMinBitRate                147456000
        dwMaxBitRate                147456000
        dwMaxVideoFrameBufferSize     1843200
        dwDefaultFrameInterval        1000000
        bFrameIntervalType                  1
        dwFrameInterval( 0)           1000000
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         8
        bmCapabilities                   0x01
          Still image supported
        wWidth                            424
        wHeight                           240
        dwMinBitRate                 24422400
        dwMaxBitRate                 48844800
        dwMaxVideoFrameBufferSize      203520
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                             6
        bDescriptorType                    36
        bDescriptorSubtype                 13 (COLORFORMAT)
        bColorPrimaries                     1 (BT.709,sRGB)
        bTransferCharacteristics            1 (BT.709)
        bMatrixCoefficients                 4 (SMPTE 170M (BT.601))
      VideoStreaming Interface Descriptor:
        bLength                            11
        bDescriptorType                    36
        bDescriptorSubtype                  6 (FORMAT_MJPEG)
        bFormatIndex                        2
        bNumFrameDescriptors                7
        bFlags                              0
          Fixed-size samples: No
        bDefaultFrameIndex                  1
        bAspectRatioX                       0
        bAspectRatioY                       0
        bmInterlaceFlags                 0x02
          Interlaced stream or variable: No
          Fields per frame: 2 fields
          Field 1 first: No
          Field pattern: Field 1 only
        bCopyProtect                        0
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  7 (FRAME_MJPEG)
        bFrameIndex                         1
        bmCapabilities                   0x01
          Still image supported
        wWidth                            640
        wHeight                           480
        dwMinBitRate                110592000
        dwMaxBitRate                221184000
        dwMaxVideoFrameBufferSize      921600
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  7 (FRAME_MJPEG)
        bFrameIndex                         2
        bmCapabilities                   0x01
          Still image supported
        wWidth                            640
        wHeight                           360
        dwMinBitRate                 82944000
        dwMaxBitRate                165888000
        dwMaxVideoFrameBufferSize      691200
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  7 (FRAME_MJPEG)
        bFrameIndex                         3
        bmCapabilities                   0x01
          Still image supported
        wWidth                            352
        wHeight                           288
        dwMinBitRate                 36495360
        dwMaxBitRate                 72990720
        dwMaxVideoFrameBufferSize      304128
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  7 (FRAME_MJPEG)
        bFrameIndex                         4
        bmCapabilities                   0x01
          Still image supported
        wWidth                            320
        wHeight                           240
        dwMinBitRate                 27648000
        dwMaxBitRate                 55296000
        dwMaxVideoFrameBufferSize      230400
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  7 (FRAME_MJPEG)
        bFrameIndex                         5
        bmCapabilities                   0x01
          Still image supported
        wWidth                            800
        wHeight                           448
        dwMinBitRate                129024000
        dwMaxBitRate                258048000
        dwMaxVideoFrameBufferSize     1075200
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  7 (FRAME_MJPEG)
        bFrameIndex                         6
        bmCapabilities                   0x01
          Still image supported
        wWidth                            960
        wHeight                           544
        dwMinBitRate                188006400
        dwMaxBitRate                376012800
        dwMaxVideoFrameBufferSize     1566720
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                            34
        bDescriptorType                    36
        bDescriptorSubtype                  7 (FRAME_MJPEG)
        bFrameIndex                         7
        bmCapabilities                   0x01
          Still image supported
        wWidth                           1280
        wHeight                           720
        dwMinBitRate                331776000
        dwMaxBitRate                663552000
        dwMaxVideoFrameBufferSize     2764800
        dwDefaultFrameInterval         333333
        bFrameIntervalType                  2
        dwFrameInterval( 0)            333333
        dwFrameInterval( 1)            666666
      VideoStreaming Interface Descriptor:
        bLength                             6
        bDescriptorType                    36
        bDescriptorSubtype                 13 (COLORFORMAT)
        bColorPrimaries                     1 (BT.709,sRGB)
        bTransferCharacteristics            1 (BT.709)
        bMatrixCoefficients                 4 (SMPTE 170M (BT.601))
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x03c0  1x 960 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       2
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       3
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x0b5c  2x 860 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       4
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x0c00  2x 1024 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       5
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x135c  3x 860 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       6
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x13c0  3x 960 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       7
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x13fc  3x 1020 bytes
        bInterval               1

Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC-2.1)
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          224 Wireless
  bDeviceSubClass         1 Radio Frequency
  bDeviceProtocol         1 Bluetooth
  bMaxPacketSize0        64
  idVendor           0x0a5c Broadcom Corp.
  idProduct          0x217f BCM2045B (BDC-2.1)
  bcdDevice            7.48
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          216
    bNumInterfaces          4
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       224 Wireless
      bInterfaceSubClass      1 Radio Frequency
      bInterfaceProtocol      1 Bluetooth
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       224 Wireless
      bInterfaceSubClass      1 Radio Frequency
      bInterfaceProtocol      1 Bluetooth
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0000  1x 0 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0000  1x 0 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass       224 Wireless
      bInterfaceSubClass      1 Radio Frequency
      bInterfaceProtocol      1 Bluetooth
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0009  1x 9 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0009  1x 9 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       2
      bNumEndpoints           2
      bInterfaceClass       224 Wireless
      bInterfaceSubClass      1 Radio Frequency
      bInterfaceProtocol      1 Bluetooth
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0011  1x 17 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0011  1x 17 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       3
      bNumEndpoints           2
      bInterfaceClass       224 Wireless
      bInterfaceSubClass      1 Radio Frequency
      bInterfaceProtocol      1 Bluetooth
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       4
      bNumEndpoints           2
      bInterfaceClass       224 Wireless
      bInterfaceSubClass      1 Radio Frequency
      bInterfaceProtocol      1 Bluetooth
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       5
      bNumEndpoints           2
      bInterfaceClass       224 Wireless
      bInterfaceSubClass      1 Radio Frequency
      bInterfaceProtocol      1 Bluetooth
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass       254 Application Specific Interface
      bInterfaceSubClass      1 Device Firmware Update
      bInterfaceProtocol      1 
      iInterface              0 
      Device Firmware Upgrade Interface Descriptor:
        bLength                             7
        bDescriptorType                    33
        bmAttributes                        7
          Will Not Detach
          Manifestation Tolerant
          Upload Supported
          Download Supported
        wDetachTimeout                   5000 milliseconds
        wTransferSize                      64 bytes

Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.01
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x147e Upek
  idProduct          0x2016 Biometric Touchchip/Touchstrip Fingerprint Sensor
  bcdDevice            0.02
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              20

Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x8087 Intel Corp.
  idProduct          0x0024 Integrated Rate Matching Hub
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

Some places wrote about different kernel options.
This is what I have now:

/boot/grub/grub.cfg
linux /vmlinuz-linux-4.6.2-1-ARCH acpi_osi="!Windows 2012" root=/dev/mapper/cryptroot-x220 cryptdevice=/dev/disk/by-uuid/2496684d-15dd-4c17-b7cb-44fdd0f99cb6:cryptroot-x220 zfs=rpool-x220/ROOT/rootfs zswap.enabled=1 zswap.compressor=lz4 boot=zfs root=ZFS=rpool-x220/ROOT/rootfs rw acpi_osi="Linux"  threadirqs pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 verbose
linux /vmlinuz-linux acpi_osi="!Windows 2012" root=/dev/mapper/cryptroot-x220 cryptdevice=/dev/disk/by-uuid/2496684d-15dd-4c17-b7cb-44fdd0f99cb6:cryptroot-x220 zfs=rpool-x220/ROOT/rootfs zswap.enabled=1 zswap.compressor=lz4 boot=zfs root=ZFS=rpool-x220/ROOT/rootfs rw acpi_osi="Linux"  threadirqs pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.debug=0xe intel_iommu=igfx_off intel_iommu=soft pciehp.pciehp_force=1 verbose 

From the logfiles I still have, it looks like it still worked with linux 4.12.12-1.

Any advice and suggestions will be greatly appreciated.

Thanks in advance.

Offline

#2 2018-05-04 18:19:16

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

What is the dmesg for a boot when the controller stops working?  Does the system use any power management systems?

Offline

#3 2018-05-05 10:11:07

whitesnow
Member
Registered: 2015-01-04
Posts: 52

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Thank your for your answer.

Yes, it is a laptop. It uses at least tlp, acpid is installed as well

machine1% systemctl | grep acpid
  acpid.service                                                                                 loaded active running   ACPI event daemon  
machine1% systemctl | grep tlp  
  tlp.service                                                                                   loaded active exited    TLP system startup/shutdown                                                      

The dmesg, when the controller does not work:

[    0.000000] PCIe ASPM is forcibly enabled
[    0.000000] DMAR: Disable GFX device mapping
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16291332K/16657648K available (10252K kernel code, 1263K rwdata, 3372K rodata, 1452K init, 632K bss, 366316K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31747 entries in 125 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 36
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.000000] DMAR: RMRR base: 0x000000da8d5000 end: 0x000000da8ebfff
[    0.000000] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.000000] x2apic enabled
[    0.000000] Switched APIC routing to cluster x2apic.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 2492.187 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23ec653ee34, max_idle_ns: 440795301546 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4986.05 BogoMIPS (lpj=8307290)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.019999] Security Framework initialized
[    0.019999] Yama: becoming mindful.
[    0.025221] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.026322] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.026376] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.026412] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.026618] Disabled fast string operations
[    0.026621] CPU: Physical Processor ID: 0
[    0.026622] CPU: Processor Core ID: 0
[    0.026627] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.026628] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.026632] mce: CPU supports 7 MCE banks
[    0.026640] CPU0: Thermal monitoring enabled (TM1)
[    0.026649] process: using mwait in idle threads
[    0.026652] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.026652] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.026655] Spectre V2 : Mitigation: Full generic retpoline
[    0.026761] Freeing SMP alternatives memory: 24K
[    0.028114] TSC deadline timer enabled
[    0.028118] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.040021] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.040081] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.040087] ... version:                3
[    0.040089] ... bit width:              48
[    0.040090] ... generic registers:      4
[    0.040093] ... value mask:             0000ffffffffffff
[    0.040095] ... max period:             00007fffffffffff
[    0.040096] ... fixed-purpose events:   3
[    0.040098] ... event mask:             000000070000000f
[    0.046677] Hierarchical SRCU implementation.
[    0.066976] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.073342] smp: Bringing up secondary CPUs ...
[    0.103374] x86: Booting SMP configuration:
[    0.103378] .... node  #0, CPUs:      #1
[    0.003333] Disabled fast string operations
[    0.133376]  #2
[    0.003333] Disabled fast string operations
[    0.163374]  #3
[    0.003333] Disabled fast string operations
[    0.166125] smp: Brought up 1 node, 4 CPUs
[    0.166125] smpboot: Max logical packages: 2
[    0.166125] smpboot: Total of 4 processors activated (19945.22 BogoMIPS)
[    0.167189] devtmpfs: initialized
[    0.167189] x86/mm: Memory block size: 128MB
[    0.167973] PM: Registering ACPI NVS region [mem 0xdaa9f000-0xdab9efff] (1048576 bytes)
[    0.167973] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.167973] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.167973] pinctrl core: initialized pinctrl subsystem
[    0.167973] RTC time:  5:50:14, date: 05/05/18
[    0.167973] NET: Registered protocol family 16
[    0.167973] cpuidle: using governor ladder
[    0.167973] cpuidle: using governor menu
[    0.167973] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.167973] ACPI: bus type PCI registered
[    0.167973] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.167973] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.167973] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.167973] PCI: Using configuration type 1 for base access
[    0.167973] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.170796] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.170796] ACPI: Added _OSI(Module Device)
[    0.170796] ACPI: Added _OSI(Processor Device)
[    0.170796] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.170796] ACPI: Added _OSI(Processor Aggregator Device)
[    0.170796] ACPI: Deleted _OSI(Windows 2012)
[    0.170796] ACPI: Added _OSI(Linux)
[    0.170796] ACPI: EC: EC started
[    0.170796] ACPI: EC: interrupt blocked
[    0.171257] ACPI: \: Used as first EC
[    0.171258] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.171260] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.177751] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query honored via cmdline
[    0.187475] ACPI: Dynamic OEM Table Load:
[    0.187475] ACPI: SSDT 0xFFFF9F0E4B441000 0008C0 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.187635] ACPI: Dynamic OEM Table Load:
[    0.187635] ACPI: SSDT 0xFFFF9F0E4B5B9800 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.187638] ACPI: Dynamic OEM Table Load:
[    0.187638] ACPI: SSDT 0xFFFF9F0E4B616400 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.190292] ACPI: Interpreter enabled
[    0.190312] ACPI: (supports S0 S3 S4 S5)
[    0.190313] ACPI: Using IOAPIC for interrupt routing
[    0.190338] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.190643] ACPI: GPE 0x01 active on init
[    0.190673] ACPI: GPE 0x16 active on init
[    0.190685] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.196055] ACPI: Power Resource [PUBS] (on)
[    0.196777] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.197991] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.201823] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[    0.202405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.202536] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[    0.202665] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.202793] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.202922] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
[    0.203029] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.203159] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
[    0.203288] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[    0.203403] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.203408] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.203700] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.203835] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.203837] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.203839] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.203840] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.203855] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.204063] PCI host bridge to bus 0000:00
[    0.204065] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.204069] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.204070] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.204072] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.204073] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[    0.204074] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.204083] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.204174] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.204185] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.204190] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.204194] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.204297] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.204320] pci 0000:00:16.0: reg 0x10: [mem 0xf2625000-0xf262500f 64bit]
[    0.204386] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.204456] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[    0.204476] pci 0000:00:16.3: reg 0x10: [io  0x50e0-0x50e7]
[    0.204485] pci 0000:00:16.3: reg 0x14: [mem 0xf262b000-0xf262bfff]
[    0.204618] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.204638] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[    0.204646] pci 0000:00:19.0: reg 0x14: [mem 0xf262a000-0xf262afff]
[    0.204655] pci 0000:00:19.0: reg 0x18: [io  0x5060-0x507f]
[    0.204717] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.204792] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.204815] pci 0000:00:1a.0: reg 0x10: [mem 0xf2629000-0xf26293ff]
[    0.204901] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.204979] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.205001] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[    0.205078] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.205157] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.205239] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.205319] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.205405] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.205485] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.205571] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.205654] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.205793] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.205884] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.205907] pci 0000:00:1d.0: reg 0x10: [mem 0xf2628000-0xf26283ff]
[    0.205993] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.206068] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.206243] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018a
[    0.206261] pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
[    0.206269] pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
[    0.206276] pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
[    0.206285] pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
[    0.206294] pci 0000:00:1f.2: reg 0x20: [io  0x50b0-0x50bf]
[    0.206304] pci 0000:00:1f.2: reg 0x24: [io  0x50a0-0x50af]
[    0.206314] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.206315] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.206317] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.206318] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.206407] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.206427] pci 0000:00:1f.3: reg 0x10: [mem 0xf2624000-0xf26240ff 64bit]
[    0.206448] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.206536] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
[    0.206554] pci 0000:00:1f.5: reg 0x10: [io  0x50c8-0x50cf]
[    0.206562] pci 0000:00:1f.5: reg 0x14: [io  0x50ec-0x50ef]
[    0.206569] pci 0000:00:1f.5: reg 0x18: [io  0x50c0-0x50c7]
[    0.206577] pci 0000:00:1f.5: reg 0x1c: [io  0x50e8-0x50eb]
[    0.206585] pci 0000:00:1f.5: reg 0x20: [io  0x5090-0x509f]
[    0.206593] pci 0000:00:1f.5: reg 0x24: [io  0x5080-0x508f]
[    0.206735] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.206915] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[    0.207119] pci 0000:03:00.0: reg 0x10: [mem 0xf2500000-0xf2501fff 64bit]
[    0.207891] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.216824] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.216831] pci 0000:00:1c.1:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.216925] acpiphp: Slot [1] registered
[    0.216979] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[    0.217059] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[    0.217338] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.226706] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.226715] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.226724] pci 0000:00:1c.3:   bridge window [mem 0xf1c00000-0xf24fffff]
[    0.226747] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.226993] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
[    0.227020] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[    0.227057] pci 0000:0d:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[    0.227274] pci 0000:0d:00.0: supports D1 D2
[    0.227275] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.236896] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.236900] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.236905] pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.236914] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.238672] ACPI: EC: interrupt unblocked
[    0.238678] ACPI: EC: event unblocked
[    0.238685] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.238687] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.238761] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.238761] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.238761] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.238761] vgaarb: loaded
[    0.238761] EDAC MC: Ver: 3.0.0
[    0.238761] PCI: Using ACPI for IRQ routing
[    0.241931] PCI: pci_cache_line_size set to 64 bytes
[    0.242340] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.242342] e820: reserve RAM buffer [mem 0xda59f000-0xdbffffff]
[    0.242343] e820: reserve RAM buffer [mem 0xdac00000-0xdbffffff]
[    0.242344] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
[    0.242439] NetLabel: Initializing
[    0.242440] NetLabel:  domain hash size = 128
[    0.242440] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.242453] NetLabel:  unlabeled traffic allowed by default
[    0.242461] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.242461] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.244347] clocksource: Switched to clocksource tsc-early
[    0.253518] VFS: Disk quotas dquot_6.6.0
[    0.253535] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.253603] pnp: PnP ACPI init
[    0.254249] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.254251] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.254253] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.254254] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.254256] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.254257] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.254259] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.254260] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.254262] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.254263] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.254265] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.254266] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.254268] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.254269] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.254271] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.254273] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.254274] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.254280] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.254397] pnp 00:01: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:05:00.0 BAR 0 [mem 0x00000000-0x00001fff 64bit]
[    0.254423] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.254424] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.254426] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.254428] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.254429] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.254431] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.254433] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.254435] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.254436] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.254438] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.254439] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.254444] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.254502] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.254524] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.254545] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[    0.254600] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.255224] pnp: PnP ACPI: found 6 devices
[    0.260963] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.261005] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.261018] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.261023] pci 0000:00:1c.1:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.261035] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[    0.261063] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.261066] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.261071] pci 0000:00:1c.3:   bridge window [mem 0xf1c00000-0xf24fffff]
[    0.261075] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.261082] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.261085] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.261091] pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.261096] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.261106] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.261107] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.261109] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.261110] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[    0.261112] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[    0.261113] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[    0.261115] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.261116] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf24fffff]
[    0.261118] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.261119] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.261120] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
[    0.261122] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.261235] NET: Registered protocol family 2
[    0.261384] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.261447] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.261662] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.261786] TCP: Hash tables configured (established 131072 bind 65536)
[    0.261837] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.261886] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.261970] NET: Registered protocol family 1
[    0.261985] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.262438] pci 0000:05:00.0: enabling device (0000 -> 0002)
[    0.262656] PCI: CLS 64 bytes, default 64
[    0.262702] Unpacking initramfs...
[    0.480877] Freeing initrd memory: 13120K
[    0.480922] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.480925] software IO TLB [mem 0xd659f000-0xda59f000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.481132] Scanning for low memory corruption every 60 seconds
[    0.481638] Initialise system trusted keyrings
[    0.481647] Key type blacklist registered
[    0.481693] workingset: timestamp_bits=44 max_order=22 bucket_order=0
[    0.482793] zbud: loaded
[    0.484006] Key type asymmetric registered
[    0.484008] Asymmetric key parser 'x509' registered
[    0.484037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.484064] io scheduler noop registered
[    0.484065] io scheduler deadline registered
[    0.484104] io scheduler cfq registered (default)
[    0.484105] io scheduler mq-deadline registered
[    0.484106] io scheduler kyber registered
[    0.484111] io scheduler bfq registered
[    0.484740] intel_idle: MWAIT substates: 0x21120
[    0.484741] intel_idle: v0.4.1 model 0x2A
[    0.484863] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.484907] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.484923] ACPI: Lid Switch [LID]
[    0.484959] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.484971] ACPI: Sleep Button [SLPB]
[    0.485018] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.485030] ACPI: Power Button [PWRF]
[    0.486595] thermal LNXTHERM:00: registered as thermal_zone0
[    0.486596] ACPI: Thermal Zone [THM0] (50 C)
[    0.486774] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.507575] 0000:00:16.3: ttyS0 at I/O 0x50e0 (irq = 19, base_baud = 115200) is a 16550A
[    0.508453] intel_pstate: Intel P-state driver initializing
[    0.508676] ledtrig-cpu: registered to indicate activity on CPUs
[    0.509359] NET: Registered protocol family 10
[    0.520988] Segment Routing with IPv6
[    0.521050] NET: Registered protocol family 17
[    0.522023] RAS: Correctable Errors collector initialized.
[    0.522121] microcode: sig=0x206a7, pf=0x10, revision=0x18
[    0.522270] microcode: Microcode Update Driver: v2.2.
[    0.522296] sched_clock: Marking stable (522255019, 0)->(504905597, 17349422)
[    0.522815] registered taskstats version 1
[    0.522833] Loading compiled-in X.509 certificates
[    0.527184] zswap: loaded using pool lz4/zbud
[    0.530351] Key type big_key registered
[    0.530861]   Magic number: 2:683:819
[    0.530919] hctosys: unable to open rtc device (rtc0)
[    0.533117] Freeing unused kernel memory: 1452K
[    0.533118] Write protecting the kernel read-only data: 16384k
[    0.534435] Freeing unused kernel memory: 2016K
[    0.539190] Freeing unused kernel memory: 724K
[    0.568328] device-mapper: uevent: version 1.0.3
[    0.568469] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.568710] spl: loading out-of-tree module taints kernel.
[    0.571543] SPL: Loaded module v0.7.8-1
[    0.571709] znvpair: module license 'CDDL' taints kernel.
[    0.571710] Disabling lock debugging due to kernel taint
[    1.493343] tsc: Refined TSC clocksource calibration: 2491.905 MHz
[    1.493350] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23eb5abbd7b, max_idle_ns: 440795277677 ns
[    1.493383] clocksource: Switched to clocksource tsc
[    2.176809] ZFS: Loaded module v0.7.8-1, ZFS pool version 5000, ZFS filesystem version 5
[    2.226052] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    2.229868] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.229929] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.239318] SCSI subsystem initialized
[    2.243480] cryptd: max_cpu_qlen set to 1000
[    2.243602] ACPI: bus type USB registered
[    2.243629] usbcore: registered new interface driver usbfs
[    2.243640] usbcore: registered new interface driver hub
[    2.243671] usbcore: registered new device driver usb
[    2.246552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.246854] libata version 3.00 loaded.
[    2.248837] ehci-pci: EHCI PCI platform driver
[    2.248994] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.249003] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.249019] ehci-pci 0000:00:1a.0: debug port 2
[    2.250752] AVX version of gcm_enc/dec engaged.
[    2.250753] AES CTR mode by8 optimization enabled
[    2.252915] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.253440] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf2629000
[    2.253889] sdhci: Secure Digital Host Controller Interface driver
[    2.253890] sdhci: Copyright(c) Pierre Ossman
[    2.255866] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4)
[    2.256386] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    2.257569] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[    2.257730] xhci_hcd 0000:05:00.0: Resetting
[    2.258947] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.587231] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.587408] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.587410] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.587411] usb usb1: Product: EHCI Host Controller
[    2.587412] usb usb1: Manufacturer: Linux 4.16.4-1-ARCH ehci_hcd
[    2.587413] usb usb1: SerialNumber: 0000:00:1a.0
[    2.587534] hub 1-0:1.0: USB hub found
[    2.587540] hub 1-0:1.0: 3 ports detected
[    2.587784] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.587789] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.587801] ehci-pci 0000:00:1d.0: debug port 2
[    2.591690] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.591752] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2628000
[    2.603368] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.603457] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.603458] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.603459] usb usb2: Product: EHCI Host Controller
[    2.603460] usb usb2: Manufacturer: Linux 4.16.4-1-ARCH ehci_hcd
[    2.603461] usb usb2: SerialNumber: 0000:00:1d.0
[    2.603581] hub 2-0:1.0: USB hub found
[    2.603586] hub 2-0:1.0: 3 ports detected
[    2.603723] ata_piix 0000:00:1f.2: version 2.13
[    2.603816] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    2.762228] scsi host0: ata_piix
[    2.762663] scsi host1: ata_piix
[    2.762790] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x50b0 irq 14
[    2.762799] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x50b8 irq 15
[    2.763138] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    2.918206] scsi host2: ata_piix
[    2.918668] scsi host3: ata_piix
[    2.918813] ata3: SATA max UDMA/133 cmd 0x50c8 ctl 0x50ec bmdma 0x5090 irq 19
[    2.918819] ata4: SATA max UDMA/133 cmd 0x50c0 ctl 0x50e8 bmdma 0x5098 irq 19
[    2.920090] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.933480] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.067635] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    3.067643] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.068367] hub 1-1:1.0: USB hub found
[    3.068688] hub 1-1:1.0: 6 ports detected
[    3.081386] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    3.081394] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.081963] hub 2-1:1.0: USB hub found
[    3.082144] hub 2-1:1.0: 8 ports detected
[    3.246351] ata3: SATA link down (SStatus 0 SControl 300)
[    3.674703] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.674713] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    3.679999] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    3.680637] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.680639] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.680640] usb usb3: Product: xHCI Host Controller
[    3.680641] usb usb3: Manufacturer: Linux 4.16.4-1-ARCH xhci-hcd
[    3.680642] usb usb3: SerialNumber: 0000:05:00.0
[    3.680757] hub 3-0:1.0: USB hub found
[    3.680816] hub 3-0:1.0: 2 ports detected
[    3.680914] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.680916] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    3.683505] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.683524] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    3.683525] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.683526] usb usb4: Product: xHCI Host Controller
[    3.683527] usb usb4: Manufacturer: Linux 4.16.4-1-ARCH xhci-hcd
[    3.683528] usb usb4: SerialNumber: 0000:05:00.0
[    3.683639] hub 4-0:1.0: USB hub found
[    3.683697] hub 4-0:1.0: 2 ports detected
[    3.730171] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    3.829507] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    3.829515] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.829520] usb 1-1.3: Product: Biometric Coprocessor
[    3.829524] usb 1-1.3: Manufacturer: UPEK
[    3.830256] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.830278] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.835686] ata1.00: supports DRM functions and may not be fully accessible
[    3.835696] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133
[    3.835701] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    3.836851] ata1.01: supports DRM functions and may not be fully accessible
[    3.836859] ata1.01: ATA-10: Crucial_CT250MX200SSD3, MU02, max UDMA/133
[    3.836864] ata1.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.844784] ata1.00: supports DRM functions and may not be fully accessible
[    3.845956] ata1.00: configured for UDMA/133
[    3.848645] ata1.01: supports DRM functions and may not be fully accessible
[    3.853215] ata1.01: configured for UDMA/133
[    3.853783] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  DB6Q PQ: 0 ANSI: 5
[    3.854802] scsi 0:0:1:0: Direct-Access     ATA      Crucial_CT250MX2 MU02 PQ: 0 ANSI: 5
[    3.858661] ata1.01: Enabling discard_zeroes_data
[    3.858717] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.858736] sd 0:0:0:0: [sda] Write Protect is off
[    3.858738] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.858759] sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.858762] sd 0:0:1:0: [sdb] 4096-byte physical blocks
[    3.858764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.858777] sd 0:0:1:0: [sdb] Write Protect is off
[    3.858779] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    3.858805] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.858946] ata1.01: Enabling discard_zeroes_data
[    3.861661]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 sdb16 sdb17 sdb19
[    3.861968]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
[    3.862255] ata1.01: Enabling discard_zeroes_data
[    3.862655] sd 0:0:1:0: [sdb] supports TCG Opal
[    3.862657] sd 0:0:1:0: [sdb] Attached SCSI disk
[    3.863214] sd 0:0:0:0: [sda] supports TCG Opal
[    3.863215] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.903515] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    4.007797] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    4.007804] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.007809] usb 1-1.4: Product: Broadcom Bluetooth Device
[    4.007813] usb 1-1.4: Manufacturer: Broadcom Corp
[    4.007817] usb 1-1.4: SerialNumber: xxxxxxxxxxx
[    4.080155] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    4.184676] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[    4.184684] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.184688] usb 1-1.6: Product: Integrated Camera
[    4.184692] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    4.293495] ata4: failed to resume link (SControl 0)
[    4.305595] ata4: SATA link down (SStatus 4 SControl 0)
[    4.500154] ata2.01: failed to resume link (SControl 0)
[    4.512218] ata2.00: SATA link down (SStatus 0 SControl 300)
[    4.512242] ata2.01: SATA link down (SStatus 4 SControl 0)
[    4.560964] random: fast init done
[   10.014877] random: crng init done
[   14.114985] NET: Registered protocol family 38
[   27.179086] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[   27.193699] systemd[1]: Detected architecture x86-64.
[   27.199068] systemd[1]: Set hostname to <machine1.example.com>.
[   27.393829] systemd[1]: Created slice system-getty.slice.
[   27.394419] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   27.404732] systemd[1]: Created slice User and Session Slice.
[   27.405472] systemd[1]: Listening on LVM2 poll daemon socket.
[   27.406021] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   27.407109] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[   27.407724] systemd[1]: Listening on Journal Socket.
[   27.428904] acpi_call: disagrees about version of symbol module_layout
[   27.445945] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   27.446915] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   27.452822] thinkpad_ec: disagrees about version of symbol module_layout
[   27.466719] vboxdrv: Found 4 processor cores
[   27.495752] RPC: Registered named UNIX socket transport module.
[   27.495754] RPC: Registered udp transport module.
[   27.495754] RPC: Registered tcp transport module.
[   27.495755] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   27.500484] vboxdrv: TSC mode is Invariant, tentative frequency 2491904151 Hz
[   27.500486] vboxdrv: Successfully loaded version 5.2.10 (interface 0x00290001)
[   27.502156] VBoxPciLinuxInit
[   27.502163] vboxpci: IOMMU not found (not registered)
[   27.503323] VBoxNetAdp: Successfully started.
[   27.505317] VBoxNetFlt: Successfully started.
[   27.550182] systemd-journald[1097]: Received request to flush runtime journal from PID 1
[   27.555472] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   27.698839] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.738106] pps_core: LinuxPPS API ver. 1 registered
[   27.738109] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   27.761425] ACPI: AC Adapter [AC] (on-line)
[   27.766988] Linux agpgart interface v0.103
[   27.772201] PTP clock support registered
[   27.781180] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[   27.783840] Non-volatile memory driver v1.3
[   27.792199] ACPI: Battery Slot [BAT0] (battery present)
[   27.819575] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[   27.821212] rtc_cmos 00:02: RTC can wake from S4
[   27.821750] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[   27.824845] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   27.834036] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   27.834038] thinkpad_acpi: http://ibm-acpi.sf.net/
[   27.834039] thinkpad_acpi: ThinkPad BIOS 8DET50WW (1.20 ), EC unknown
[   27.834040] thinkpad_acpi: Lenovo ThinkPad X220, model 4291Y1C
[   27.835882] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20180105/utaddress-247)
[   27.835892] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.835918] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20180105/utaddress-247)
[   27.835928] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.835935] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20180105/utaddress-247)
[   27.835956] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.835967] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20180105/utaddress-247)
[   27.835972] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.835991] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   27.836573] thinkpad_acpi: radio switch found; radios are enabled
[   27.837680] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[   27.837879] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   27.837880] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   27.850089] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   27.852303] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   27.858323] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[   27.874538] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   27.876307] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   27.876308] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   27.876515] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   27.907119] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   27.917701] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   27.917703] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   27.917704] RAPL PMU: hw unit of domain package 2^-16 Joules
[   27.917705] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   27.940968] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   27.979176] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   27.980016] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   27.980019] cfg80211: failed to load regulatory.db
[   27.995073] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[   28.074602] Intel(R) Wireless WiFi driver for Linux
[   28.074604] Copyright(c) 2003- 2015 Intel Corporation
[   28.090115] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   28.144664] intel_rapl: Found RAPL domain package
[   28.144667] intel_rapl: Found RAPL domain core
[   28.144668] intel_rapl: Found RAPL domain uncore
[   28.144675] intel_rapl: RAPL package 0 domain package locked by BIOS
[   28.147925] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:7c:03:b4
[   28.147937] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[   28.147988] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[   28.208125] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   28.208128] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   28.208129] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   28.208132] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[   28.277571] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   28.340868] i915: unknown parameter 'enable_rc6' ignored
[   28.340872] Setting dangerous option enable_fbc - tainting kernel
[   28.340874] i915: unknown parameter 'semaphores' ignored
[   28.340876] i915: unknown parameter 'i915_enable_rc6' ignored
[   28.340878] i915: unknown parameter 'i915_enable_fbc' ignored
[   28.340880] i915: unknown parameter 'lvds_downclock' ignored
[   28.341992] [drm:i915_driver_load [i915]] Found CougarPoint PCH
[   28.342033] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00
[   28.342490] [drm:i915_driver_load [i915]] ppgtt mode: 1
[   28.342535] [drm:intel_uc_sanitize_options [i915]] enable_guc=0 (submission:no huc:no)
[   28.342583] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 2048M
[   28.342618] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
[   28.342653] [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
[   28.342655] [drm] Replacing VGA console driver
[   28.343128] Console: switching to colour dummy device 80x25
[   28.343224] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 65536K
[   28.343275] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xdaaf6018
[   28.343330] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
[   28.343393] [drm:intel_opregion_setup [i915]] SWSCI supported
[   28.344017] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000483, SBCB callbacks 00000203
[   28.344055] [drm:intel_opregion_setup [i915]] ASLE supported
[   28.344092] [drm:intel_opregion_setup [i915]] ASLE extension supported
[   28.344128] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
[   28.344218] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
[   28.344220] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   28.344221] [drm] Driver supports precise vblank timestamp query.
[   28.344262] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
[   28.344302] [drm:intel_bios_init [i915]] VBT signature "$VBT SANDYBRIDGE-M  ", BDB version 161
[   28.344341] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[   28.344378] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
[   28.344418] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-22)
[   28.344455] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
[   28.344490] [drm:intel_bios_init [i915]] DRRS supported mode is static
[   28.344527] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
[   28.344549] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 0 74800 1366 1414 1446 1578 768 770 775 790 0x8 0xa
[   28.344583] [drm:intel_bios_init [i915]] VBT initial LVDS value 300300
[   28.344618] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 325 Hz, active high, min brightness 0, level 0, controller 0
[   28.344652] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables:
[   28.344666] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[   28.344699] [drm:intel_bios_init [i915]] DRRS State Enabled:1
[   28.344732] [drm:intel_bios_init [i915]] No PSR BDB found.
[   28.344765] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT
[   28.344810] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
[   28.344857] [drm:i915_driver_load [i915]] rawclk rate: 125000 kHz
[   28.344896] [drm:intel_power_well_enable [i915]] enabling always-on
[   28.346265] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
[   28.346307] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 7 (0.7 usec)
[   28.346343] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 3 (1.5 usec)
[   28.346377] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 4 (2.0 usec)
[   28.346411] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 22 (11.0 usec)
[   28.346444] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 7 (0.7 usec)
[   28.346476] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 3 (1.5 usec)
[   28.346508] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 4 (2.0 usec)
[   28.346540] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 22 (11.0 usec)
[   28.346571] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 7 (0.7 usec)
[   28.346603] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 3 (1.5 usec)
[   28.346634] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 4 (2.0 usec)
[   28.346665] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 22 (11.0 usec)
[   28.346707] [drm:intel_init_pm [i915]] WM latency values increased to avoid potential underruns
[   28.346740] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 12 (1.2 usec)
[   28.346772] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 3 (1.5 usec)
[   28.346803] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 4 (2.0 usec)
[   28.346834] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 22 (11.0 usec)
[   28.346866] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 12 (1.2 usec)
[   28.346896] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 3 (1.5 usec)
[   28.346926] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 4 (2.0 usec)
[   28.346957] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 22 (11.0 usec)
[   28.346987] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 12 (1.2 usec)
[   28.347017] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 3 (1.5 usec)
[   28.347047] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 4 (2.0 usec)
[   28.347077] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 22 (11.0 usec)
[   28.347122] [drm:intel_modeset_init [i915]] 2 display pipes available.
[   28.347193] [drm:intel_modeset_init [i915]] FDI PLL freq=270000
[   28.347235] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 400000 kHz, VCO 0 kHz, ref 0 kHz, voltage level 0
[   28.347274] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 400000 kHz
[   28.347312] [drm:intel_modeset_init [i915]] Max dotclock rate: 360000 kHz
[   28.347317] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   28.347675] [drm:intel_lvds_init [i915]] LVDS PPS:t1+t2 300 t3 300 t4 4000 t5 2000 tx 2000 divider 6249 port 0 powerdown_on_reset 1
[   28.360932] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[   28.360947] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   28.360971] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   28.361029] [drm:intel_lvds_init [i915]] using preferred mode from EDID: 
[   28.361044] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[   28.361092] [drm:intel_panel_setup_backlight [i915]] Connector LVDS-1 backlight initialized, enabled, brightness 3000/3000
[   28.361137] [drm:intel_lvds_init [i915]] detected single-link lvds configuration
[   28.361194] [drm:intel_crt_reset [i915]] crt adpa set to 0xf40000
[   28.361237] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[   28.387396] [drm:intel_sdvo_read_byte [i915]] i2c transfer returned -6
[   28.387439] [drm:intel_sdvo_init [i915]] No SDVO device found on SDVOB
[   28.387533] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[   28.387575] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
[   28.387617] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (platform default)
[   28.387668] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
[   28.387706] [drm:intel_dp_init_connector [i915]] using AUX B for port B (platform default)
[   28.387745] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
[   28.387781] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (platform default)
[   28.387820] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port D
[   28.387856] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x6 for port D (platform default)
[   28.387895] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
[   28.387931] [drm:intel_dp_init_connector [i915]] using AUX C for port C (platform default)
[   28.387969] [drm:intel_dp_init_connector [i915]] Adding DP connector on port D
[   28.388003] [drm:intel_dp_init_connector [i915]] using AUX D for port D (platform default)
[   28.388048] [drm:intel_init_pch_refclk [i915]] has_panel 1 has_lvds 1 has_ck505 0 using_ssc_source 1
[   28.388088] [drm:intel_init_pch_refclk [i915]] Using SSC on panel
[   28.388547] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0
[   28.388583] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0
[   28.388618] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0
[   28.388652] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:37:pipe A] hw state readout: enabled
[   28.388687] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
[   28.388720] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
[   28.388752] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
[   28.388784] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:47:pipe B] hw state readout: disabled
[   28.388819] [drm:intel_modeset_setup_hw_state [i915]] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1
[   28.388853] [drm:intel_modeset_setup_hw_state [i915]] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0
[   28.388888] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:49:LVDS] hw state readout: enabled, pipe A
[   28.388922] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:55:CRT] hw state readout: disabled, pipe A
[   28.388955] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:56:HDMI B] hw state readout: disabled, pipe A
[   28.388988] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:61:DP B] hw state readout: disabled, pipe A
[   28.389022] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:63:HDMI C] hw state readout: disabled, pipe A
[   28.389055] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:65:HDMI D] hw state readout: disabled, pipe A
[   28.389088] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:67:DP C] hw state readout: disabled, pipe A
[   28.389121] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:69:DP D] hw state readout: disabled, pipe A
[   28.389155] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:48:LVDS-1] hw state readout: enabled
[   28.389188] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:54:VGA-1] hw state readout: disabled
[   28.389221] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:57:HDMI-A-1] hw state readout: disabled
[   28.389254] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:62:DP-1] hw state readout: disabled
[   28.389286] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:64:HDMI-A-2] hw state readout: disabled
[   28.389319] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:66:HDMI-A-3] hw state readout: disabled
[   28.389352] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:68:DP-2] hw state readout: disabled
[   28.389384] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:70:DP-3] hw state readout: disabled
[   28.389429] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][setup_hw_state]
[   28.389463] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10)
[   28.389497] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 0
[   28.389530] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 4; gmch_m: 1307224, gmch_n: 8388608, link_m: 145247, link_n: 524288, tu: 64
[   28.389563] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[   28.389595] [drm:intel_dump_pipe_config [i915]] requested mode:
[   28.389616] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75000 1366 1414 1446 1578 768 770 775 790 0x40 0xa
[   28.389648] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[   28.389662] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 75000 1366 1414 1446 1578 768 770 775 790 0x40 0xa
[   28.389696] [drm:intel_dump_pipe_config [i915]] crtc timings: 75000 1366 1414 1446 1578 768 770 775 790, type: 0x40 flags: 0xa
[   28.389728] [drm:intel_dump_pipe_config [i915]] port clock: 75000, pipe src size: 720x400, pixel rate 75000
[   28.389761] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
[   28.389792] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[   28.389830] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x21108, fp1: 0x30d07
[   28.389862] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[   28.389893] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0
[   28.389924] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0
[   28.389955] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] disabled, scaler_id = 0
[   28.389987] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe B][setup_hw_state]
[   28.390016] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
[   28.392812] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
[   28.392854] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[   28.392892] [drm:intel_dump_pipe_config [i915]] requested mode:
[   28.392912] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   28.392949] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[   28.392964] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   28.393002] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[   28.393037] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
[   28.393071] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   28.393104] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[   28.393145] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
[   28.393178] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[   28.393212] [drm:intel_dump_pipe_config [i915]] [PLANE:38:primary B] disabled, scaler_id = 0
[   28.393245] [drm:intel_dump_pipe_config [i915]] [PLANE:41:sprite B] disabled, scaler_id = 0
[   28.393277] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor B] disabled, scaler_id = 0
[   28.393657] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 80000000]
[   28.395919] [drm:i915_ppgtt_create [i915]] Allocated pde space (2M) at GTT entry: 7fe00
[   28.395955] [drm:i915_ppgtt_create [i915]] Adding PPGTT at offset 7fe00000
[   28.395997] [drm:i915_gem_contexts_init [i915]] logical context support initialized
[   28.398066] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0x7fdfd000
[   28.398116] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0x7fdfc000
[   28.403428] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0x7fdfb000
[   28.405172] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0x7fdfa000
[   28.405221] [drm:intel_init_gt_powersave [i915]] Overclocking supported, max: 1300MHz, overclock: 1300MHz
[   28.405282] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0
[   28.405356] [drm:i915_gem_init [i915]] Wrong MCH_SSKPD value: 0x16040307 This can cause underruns.
[   28.405498] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping
[   28.405538] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
[   28.405576] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
[   28.405933] [drm:intel_backlight_device_register [i915]] Connector LVDS-1 backlight sysfs interface registered
[   28.406059] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
[   28.406255] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2
[   28.406376] [drm:intel_dp_connector_register [i915]] registering DPDDC-D bus for card0-DP-3
[   28.406438] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[   28.406578] [drm:intel_opregion_register [i915]] 8 outputs detected
[   28.408069] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   28.408802] [drm:asle_work [i915]] bclp = 0x80000008
[   28.408844] [drm:asle_work [i915]] updating opregion backlight 8/255
[   28.408886] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 94
[   28.408928] [drm:asle_work [i915]] PWM freq is not supported
[   28.409816] [drm:asle_work [i915]] bclp = 0x800000ff
[   28.409854] [drm:asle_work [i915]] updating opregion backlight 255/255
[   28.409895] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 3000
[   28.409934] [drm:asle_work [i915]] PWM freq is not supported
[   28.410751] acpi device:00: registered as cooling_device5
[   28.410867] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   28.411048] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   28.411065] [drm:drm_setup_crtcs [drm_kms_helper]] 
[   28.411074] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1]
[   28.411119] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1]
[   28.411126] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] status updated from unknown to connected
[   28.411149] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[   28.411161] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   28.411187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes :
[   28.411202] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[   28.411209] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1]
[   28.411253] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1
[   28.411296] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0xf40000
[   28.411322] i915 device info: pciid=0x0126 rev=0x09 platform=SANDYBRIDGE gen=6
[   28.411333] i915 device info: is_mobile: yes
[   28.411334] i915 device info: is_lp: no
[   28.411335] i915 device info: is_alpha_support: no
[   28.411336] i915 device info: has_64bit_reloc: no
[   28.411338] i915 device info: has_aliasing_ppgtt: yes
[   28.411339] i915 device info: has_csr: no
[   28.411340] i915 device info: has_ddi: no
[   28.411341] i915 device info: has_dp_mst: no
[   28.411342] i915 device info: has_reset_engine: no
[   28.411343] i915 device info: has_fbc: yes
[   28.411345] i915 device info: has_fpga_dbg: no
[   28.411346] i915 device info: has_full_ppgtt: no
[   28.411347] i915 device info: has_full_48bit_ppgtt: no
[   28.411348] i915 device info: has_gmch_display: no
[   28.411349] i915 device info: has_guc: no
[   28.411350] i915 device info: has_guc_ct: no
[   28.411352] i915 device info: has_hotplug: yes
[   28.411353] i915 device info: has_l3_dpf: no
[   28.411354] i915 device info: has_llc: yes
[   28.411355] i915 device info: has_logical_ring_contexts: no
[   28.411356] i915 device info: has_logical_ring_preemption: no
[   28.411357] i915 device info: has_overlay: no
[   28.411358] i915 device info: has_pooled_eu: no
[   28.411360] i915 device info: has_psr: no
[   28.411361] i915 device info: has_rc6: yes
[   28.411362] i915 device info: has_rc6p: yes
[   28.411363] i915 device info: has_resource_streamer: no
[   28.411364] i915 device info: has_runtime_pm: no
[   28.411365] i915 device info: has_snoop: no
[   28.411367] i915 device info: unfenced_needs_alignment: no
[   28.411368] i915 device info: cursor_needs_physical: no
[   28.411369] i915 device info: hws_needs_physical: no
[   28.411377] i915 device info: overlay_needs_physical: no
[   28.411378] i915 device info: supports_tv: no
[   28.411379] i915 device info: has_ipc: no
[   28.411381] i915 device info: slice mask: 0000
[   28.411382] i915 device info: slice total: 0
[   28.411383] i915 device info: subslice total: 0
[   28.411384] i915 device info: subslice mask 0000
[   28.411385] i915 device info: subslice per slice: 0
[   28.411386] i915 device info: EU total: 0
[   28.411388] i915 device info: EU per subslice: 0
[   28.411389] i915 device info: has slice power gating: no
[   28.411390] i915 device info: has subslice power gating: no
[   28.411391] i915 device info: has EU power gating: no
[   28.411392] i915 device info: CS timestamp frequency: 12500 kHz
[   28.420026] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
[   28.420075] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
[   28.420324] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   28.420364] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
[   28.420571] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   28.420592] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
[   28.420631] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   28.420669] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
[   28.421414] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
[   28.421454] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
[   28.421493] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
[   28.421504] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] status updated from unknown to disconnected
[   28.421514] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected
[   28.421522] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1]
[   28.421560] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1]
[   28.479530] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   28.503500] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   28.503559] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   28.503601] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[   28.512159] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1]
[   28.536071] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   28.536129] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[   28.566465] iTCO_vendor_support: vendor-support=0
[   28.568720] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   28.568773] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   28.568852] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   28.591869] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   28.606274] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[   28.620061] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   28.620072] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] status updated from unknown to disconnected
[   28.620078] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected
[   28.620087] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-1]
[   28.620144] [drm:intel_dp_detect [i915]] [CONNECTOR:62:DP-1]
[   28.620155] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-1] status updated from unknown to disconnected
[   28.620161] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-1] disconnected
[   28.620168] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2]
[   28.620211] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2]
[   28.620417] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[   28.620455] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[   28.620662] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[   28.620682] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[   28.620720] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   28.620757] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[   28.621842] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[   28.621888] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[   28.622100] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[   28.622136] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[   28.622343] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[   28.622538] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   28.622546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] status updated from unknown to disconnected
[   28.622552] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected
[   28.622561] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-3]
[   28.622597] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-3]
[   28.622803] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
[   28.622836] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
[   28.623040] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
[   28.623057] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd
[   28.623091] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   28.623123] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
[   28.623881] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd
[   28.623919] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
[   28.624128] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
[   28.624161] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
[   28.624366] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
[   28.624376] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   28.624385] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-3] status updated from unknown to disconnected
[   28.624392] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-3] disconnected
[   28.624399] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-2]
[   28.624435] [drm:intel_dp_detect [i915]] [CONNECTOR:68:DP-2]
[   28.624445] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-2] status updated from unknown to disconnected
[   28.624453] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-2] disconnected
[   28.624459] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:DP-3]
[   28.624494] [drm:intel_dp_detect [i915]] [CONNECTOR:70:DP-3]
[   28.624503] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:DP-3] status updated from unknown to disconnected
[   28.624510] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:DP-3] disconnected
[   28.624518] [drm:drm_setup_crtcs [drm_kms_helper]] connector 48 enabled? yes
[   28.624525] [drm:drm_setup_crtcs [drm_kms_helper]] connector 54 enabled? no
[   28.624531] [drm:drm_setup_crtcs [drm_kms_helper]] connector 57 enabled? no
[   28.624538] [drm:drm_setup_crtcs [drm_kms_helper]] connector 62 enabled? no
[   28.624545] [drm:drm_setup_crtcs [drm_kms_helper]] connector 64 enabled? no
[   28.624552] [drm:drm_setup_crtcs [drm_kms_helper]] connector 66 enabled? no
[   28.624558] [drm:drm_setup_crtcs [drm_kms_helper]] connector 68 enabled? no
[   28.624564] [drm:drm_setup_crtcs [drm_kms_helper]] connector 70 enabled? no
[   28.624604] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
[   28.624613] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 48
[   28.624619] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 48 0
[   28.624626] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768
[   28.624632] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
[   28.624641] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 37 (0,0)
[   28.624681] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
[   28.625208] [drm:intelfb_create [i915]] allocated 1366x768 fb: 0x00061000
[   28.625270] fbcon: inteldrmfb (fb0) is primary device
[   28.625391] [drm:intel_atomic_check [i915]] [CONNECTOR:48:LVDS-1] checking for sink bpp constrains
[   28.625429] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
[   28.625470] [drm:intel_lvds_compute_config [i915]] forcing display bpp (was 24) to LVDS (18)
[   28.625509] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 1
[   28.625546] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
[   28.625584] [drm:intel_dump_pipe_config [i915]] [CRTC:37:pipe A][modeset]
[   28.625620] [drm:intel_dump_pipe_config [i915]] output_types: LVDS (0x10)
[   28.625655] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
[   28.625689] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 1; gmch_m: 2614449, gmch_n: 4194304, link_m: 145247, link_n: 524288, tu: 64
[   28.625722] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[   28.625987] [drm:intel_dump_pipe_config [i915]] requested mode:
[   28.626004] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[   28.626037] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[   28.626051] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[   28.626085] [drm:intel_dump_pipe_config [i915]] crtc timings: 74800 1366 1414 1446 1578 768 770 775 790, type: 0x48 flags: 0xa
[   28.626117] [drm:intel_dump_pipe_config [i915]] port clock: 74800, pipe src size: 1366x768, pixel rate 74800
[   28.626149] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   28.626180] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[   28.626218] [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x21108, fp1: 0x30d07
[   28.626249] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[   28.626282] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0
[   28.626313] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0
[   28.626345] [drm:intel_dump_pipe_config [i915]] [PLANE:34:cursor A] disabled, scaler_id = 0
[   28.626382] [drm:ironlake_crtc_compute_clock [i915]] using SSC reference clock of 120000 kHz
[   28.626446] [drm:intel_find_shared_dpll [i915]] [CRTC:37:pipe A] allocated PCH DPLL A
[   28.626483] [drm:intel_reference_shared_dpll [i915]] using PCH DPLL A for pipe A
[   28.626550] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[   28.626591] [drm:intel_disable_pipe [i915]] disabling pipe A
[   28.631584] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   28.795405] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[   29.240277] [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 1, on? 1) for crtc 37
[   29.240324] [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A
[   29.240576] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:LVDS]
[   29.240614] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:CRT]
[   29.240648] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:HDMI B]
[   29.240681] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP B]
[   29.240714] [drm:intel_atomic_commit_tail [i915]] [ENCODER:63:HDMI C]
[   29.240747] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:HDMI D]
[   29.240779] [drm:intel_atomic_commit_tail [i915]] [ENCODER:67:DP C]
[   29.240811] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DP D]
[   29.240846] [drm:verify_single_dpll_state.isra.38 [i915]] PCH DPLL A
[   29.240883] [drm:verify_single_dpll_state.isra.38 [i915]] PCH DPLL B
[   29.240930] [drm:intel_prepare_shared_dpll [i915]] setting up PCH DPLL A
[   29.241521] [drm:intel_enable_pipe [i915]] enabling pipe A
[   29.242376] [drm:gen6_fdi_link_train [i915]] FDI_RX_IIR 0x700
[   29.242412] [drm:gen6_fdi_link_train [i915]] FDI train 1 done.
[   29.243101] [drm:gen6_fdi_link_train [i915]] FDI_RX_IIR 0x600
[   29.243135] [drm:gen6_fdi_link_train [i915]] FDI train 2 done.
[   29.243169] [drm:ironlake_crtc_enable [i915]] FDI train done.
[   29.243209] [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 1, on? 0) for crtc 37
[   29.243245] [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A
[   29.260920] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180
[   29.260928] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[   29.310397] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   29.679298] [drm:intel_panel_enable_backlight [i915]] pipe A
[   29.679344] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 3000
[   29.694557] [drm:intel_fbc_enable [i915]] reserved 8454144 bytes of contiguous stolen space for FBC, threshold: 1
[   29.694598] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
[   29.711201] [drm:verify_connector_state.isra.76 [i915]] [CONNECTOR:48:LVDS-1]
[   29.711246] [drm:intel_atomic_commit_tail [i915]] [CRTC:37:pipe A]
[   29.711304] [drm:verify_single_dpll_state.isra.38 [i915]] PCH DPLL A
[   29.711324] Console: switching to colour frame buffer device 170x48
[   29.731374] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   29.743401] [drm:drm_fb_helper_hotplug_event.part.28 [drm_kms_helper]] 
[   29.743409] [drm:drm_setup_crtcs [drm_kms_helper]] 
[   29.743417] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1]
[   29.743458] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1]
[   29.743478] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[   29.743491] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   29.743526] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes :
[   29.743540] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[   29.743547] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1]
[   29.743579] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1
[   29.743612] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
[   29.743640] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
[   29.744261] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   29.744290] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
[   29.744486] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   29.744517] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
[   29.744545] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   29.744574] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
[   29.745319] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
[   29.745348] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
[   29.745376] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
[   29.745385] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected
[   29.745393] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1]
[   29.745422] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1]
[   29.801927] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   29.826708] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   29.826740] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   29.826770] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[   29.853367] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   29.853398] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[   29.911332] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   29.936698] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   29.936706] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected
[   29.936715] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-1]
[   29.936747] [drm:intel_dp_detect [i915]] [CONNECTOR:62:DP-1]
[   29.936757] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-1] disconnected
[   29.936763] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2]
[   29.936792] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2]
[   29.936989] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[   29.937017] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[   29.937211] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[   29.937225] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[   29.937253] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   29.937281] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[   29.938024] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[   29.938054] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[   29.938248] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[   29.938275] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[   29.938469] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[   29.938477] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   29.938484] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected
[   29.938491] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-3]
[   29.938519] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-3]
[   29.938713] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
[   29.938741] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
[   29.938933] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
[   29.938947] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd
[   29.938974] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   29.939002] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
[   29.939744] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd
[   29.939772] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
[   29.939966] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
[   29.939993] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
[   29.940197] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
[   29.940206] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   29.940214] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-3] disconnected
[   29.940221] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-2]
[   29.940249] [drm:intel_dp_detect [i915]] [CONNECTOR:68:DP-2]
[   29.940259] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-2] disconnected
[   29.940266] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:DP-3]
[   29.940295] [drm:intel_dp_detect [i915]] [CONNECTOR:70:DP-3]
[   29.940303] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:DP-3] disconnected
[   29.940310] [drm:drm_setup_crtcs [drm_kms_helper]] connector 48 enabled? yes
[   29.940318] [drm:drm_setup_crtcs [drm_kms_helper]] connector 54 enabled? no
[   29.940325] [drm:drm_setup_crtcs [drm_kms_helper]] connector 57 enabled? no
[   29.940331] [drm:drm_setup_crtcs [drm_kms_helper]] connector 62 enabled? no
[   29.940337] [drm:drm_setup_crtcs [drm_kms_helper]] connector 64 enabled? no
[   29.940343] [drm:drm_setup_crtcs [drm_kms_helper]] connector 66 enabled? no
[   29.940350] [drm:drm_setup_crtcs [drm_kms_helper]] connector 68 enabled? no
[   29.940357] [drm:drm_setup_crtcs [drm_kms_helper]] connector 70 enabled? no
[   29.940387] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
[   29.940395] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 48
[   29.940402] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 48 0
[   29.940409] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768
[   29.940415] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1366x768 config
[   29.940425] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 37 (0,0)
[   29.944433] [drm:drm_fb_helper_hotplug_event.part.28 [drm_kms_helper]] 
[   29.944440] [drm:drm_setup_crtcs [drm_kms_helper]] 
[   29.944447] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1]
[   29.944478] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1]
[   29.944493] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[   29.944506] [drm:drm_add_display_info [drm]] non_desktop set to 0
[   29.944531] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:LVDS-1] probed modes :
[   29.944545] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[   29.944552] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1]
[   29.944582] [drm:intel_crt_detect [i915]] [CONNECTOR:54:VGA-1] force=1
[   29.944614] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
[   29.944642] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
[   29.944839] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   29.944868] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
[   29.945063] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   29.945077] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
[   29.945106] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   29.945134] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
[   29.945879] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga
[   29.945908] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
[   29.945936] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
[   29.945944] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:54:VGA-1] disconnected
[   29.945951] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1]
[   29.945979] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1]
[   30.002479] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   30.026702] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   30.026732] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   30.026761] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[   30.053367] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[   30.053397] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[   30.053907] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   30.112546] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   30.136697] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   30.136705] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected
[   30.136713] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-1]
[   30.136744] [drm:intel_dp_detect [i915]] [CONNECTOR:62:DP-1]
[   30.136754] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-1] disconnected
[   30.136760] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2]
[   30.136790] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2]
[   30.136988] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[   30.137016] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[   30.137209] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[   30.137224] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[   30.137252] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   30.137280] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[   30.138023] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[   30.138053] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[   30.138247] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[   30.138275] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[   30.138467] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[   30.138476] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   30.138483] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected
[   30.138490] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-3]
[   30.138518] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-3]
[   30.138712] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
[   30.138739] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
[   30.138932] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
[   30.138946] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd
[   30.138973] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[   30.139001] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
[   30.139969] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd
[   30.139998] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
[   30.140202] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
[   30.140230] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
[   30.140423] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
[   30.140431] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
[   30.140439] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-3] disconnected
[   30.140447] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-2]
[   30.140475] [drm:intel_dp_detect [i915]] [CONNECTOR:68:DP-2]
[   30.140484] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-2] disconnected
[   30.140492] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:DP-3]
[   30.140520] [drm:intel_dp_detect [i915]] [CONNECTOR:70:DP-3]
[   30.140529] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:DP-3] disconnected
[   30.140537] [drm:drm_setup_crtcs [drm_kms_helper]] connector 48 enabled? yes
[   30.140543] [drm:drm_setup_crtcs [drm_kms_helper]] connector 54 enabled? no
[   30.140550] [drm:drm_setup_crtcs [drm_kms_helper]] connector 57 enabled? no
[   30.140556] [drm:drm_setup_crtcs [drm_kms_helper]] connector 62 enabled? no
[   30.140562] [drm:drm_setup_crtcs [drm_kms_helper]] connector 64 enabled? no
[   30.140569] [drm:drm_setup_crtcs [drm_kms_helper]] connector 66 enabled? no
[   30.140575] [drm:drm_setup_crtcs [drm_kms_helper]] connector 68 enabled? no
[   30.140581] [drm:drm_setup_crtcs [drm_kms_helper]] connector 70 enabled? no
[   30.140612] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
[   30.140619] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 48
[   30.140627] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 48 0
[   30.140633] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1366x768
[   30.140640] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1366x768 config
[   30.140649] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 37 (0,0)
[   30.304065] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[   33.973537] ata1.01: qc timeout (cmd 0xef)
[   33.973547] ata1.01: failed to enable DIPM, Emask 0x4
[   33.973561] ata1.00: hard resetting link
[   34.288070] ata1.01: hard resetting link
[   34.756911] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   34.756938] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   34.759446] ata1.01: supports DRM functions and may not be fully accessible
[   34.766799] ata1.00: supports DRM functions and may not be fully accessible
[   34.770472] ata1.00: supports DRM functions and may not be fully accessible
[   34.771363] ata1.00: configured for UDMA/133
[   34.773945] ata1.01: supports DRM functions and may not be fully accessible
[   34.778306] ata1.01: configured for UDMA/133
[   44.853501] ata1.01: qc timeout (cmd 0xef)
[   44.853512] ata1.01: failed to enable DIPM, Emask 0x4
[   44.853519] ata1.00: disabling LPM on the link
[   44.853530] ata1.01: limiting SATA link speed to 1.5 Gbps
[   44.853536] ata1.01: limiting speed to UDMA/133:PIO3
[   44.853550] ata1.00: hard resetting link
[   45.168189] ata1.01: hard resetting link
[   45.636938] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   45.636963] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   45.639518] ata1.01: supports DRM functions and may not be fully accessible
[   45.646815] ata1.00: supports DRM functions and may not be fully accessible
[   45.650513] ata1.00: supports DRM functions and may not be fully accessible
[   45.651406] ata1.00: configured for UDMA/133
[   45.654000] ata1.01: supports DRM functions and may not be fully accessible
[   45.658346] ata1.01: configured for UDMA/133
[   45.658373] ata1: EH complete
[   45.663677] ata1.01: Enabling discard_zeroes_data
[   45.664723] mousedev: PS/2 mouse device common for all mice
[   45.666905] ata1.01: Enabling discard_zeroes_data
[   45.681421] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[   45.682166] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   45.682171] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   45.682173] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[   45.682175] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   45.682176] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   45.682179] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[   45.682181] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[   45.686790] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   45.727731] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
[   45.727763] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
[   45.727791] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
[   45.728586] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   45.728902] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   45.728966] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   45.729027] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   45.729084] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   45.729144] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   45.729696] [drm:asle_work [i915]] bclp = 0x80000043
[   45.729875] [drm:asle_work [i915]] updating opregion backlight 67/255
[   45.729910] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 788
[   45.729940] [drm:asle_work [i915]] PWM freq is not supported
[   45.754847] acpi_call: disagrees about version of symbol module_layout
[   45.756025] thinkpad_ec: disagrees about version of symbol module_layout
[   45.758388] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
[   45.758426] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
[   45.758457] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
[   45.933123] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[   45.938477] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: data=ordered
[   46.463867] media: Linux media interface: v0.10
[   46.481989] Linux video capture interface: v2.00
[   46.522827] Bluetooth: Core ver 2.22
[   46.522850] NET: Registered protocol family 31
[   46.522851] Bluetooth: HCI device and connection manager initialized
[   46.522854] Bluetooth: HCI socket layer initialized
[   46.522857] Bluetooth: L2CAP socket layer initialized
[   46.522863] Bluetooth: SCO socket layer initialized
[   46.564145] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[   46.565753] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[   46.565755] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[   46.565757] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[   46.565835] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16
[   46.565910] usbcore: registered new interface driver uvcvideo
[   46.565911] USB Video Class driver (1.1.1)
[   46.597275] usbcore: registered new interface driver btusb
[   48.176352] [drm:intel_lvds_detect [i915]] [CONNECTOR:48:LVDS-1]
[   63.456760] ata1: lost interrupt (Status 0x0)
[   63.456816] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 frozen
[   63.459070] ata1.01: failed command: SET FEATURES
[   63.461373] ata1.01: cmd ef/85:00:00:00:00/00:00:00:00:00/50 tag 0
                        res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[   63.465862] ata1.01: status: { DRDY }
[   63.465878] ata1.00: hard resetting link
[   63.780298] ata1.01: hard resetting link
[   64.250182] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   64.250207] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   64.252751] ata1.01: supports DRM functions and may not be fully accessible
[   64.259691] ata1.00: supports DRM functions and may not be fully accessible
[   64.263128] ata1.00: supports DRM functions and may not be fully accessible
[   64.263870] ata1.00: configured for UDMA/133
[   64.266434] ata1.01: supports DRM functions and may not be fully accessible
[   64.270559] ata1.01: configured for UDMA/133
[   64.270597] ata1: EH complete
[   64.278636] ata1.01: Enabling discard_zeroes_data
[   64.284668] ata1.01: Enabling discard_zeroes_data
[   64.287792] e1000e 0000:00:19.0 enp0s25: changing MTU from 1500 to 8450
[   64.287800] e1000e 0000:00:19.0: Interrupt Throttle Rate off
[   64.376653] acpi_call: disagrees about version of symbol module_layout
[   64.405648] acpi_call: disagrees about version of symbol module_layout
[   64.466902] [drm:intel_backlight_device_get_brightness [i915]] get backlight PWM = 788
[   64.467660] [drm:intel_backlight_device_get_brightness [i915]] get backlight PWM = 788
[   64.602802] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   64.602804] Bluetooth: BNEP filters: protocol multicast
[   64.602807] Bluetooth: BNEP socket layer initialized
[   64.836514] FS-Cache: Loaded
[   64.894405] FS-Cache: Netfs 'nfs' registered for caching
[   64.919948] Key type dns_resolver registered
[   64.922603] NET: Registered protocol family 3
[   64.984591] NFSD: starting 90-second grace period (net f00000a9)
[   64.989965] NFS: Registering the id_resolver key type
[   64.989975] Key type id_resolver registered
[   64.989976] Key type id_legacy registered
[   65.011822] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   65.301388] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   65.383547] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   65.502105] [drm:intel_backlight_device_get_brightness [i915]] get backlight PWM = 788
[   65.512491] [drm:intel_backlight_device_get_brightness [i915]] get backlight PWM = 788
[   65.546184] thinkpad_ec: disagrees about version of symbol module_layout
[   65.548962] acpi_call: disagrees about version of symbol module_layout
[   65.602537] acpi_call: disagrees about version of symbol module_layout
[   65.675439] thinkpad_ec: disagrees about version of symbol module_layout
[   65.678130] acpi_call: disagrees about version of symbol module_layout
[   65.714588] acpi_call: disagrees about version of symbol module_layout
[   66.044389] xhci_hcd 0000:05:00.0: WARN: xHC CMD_RUN timeout
[   66.044407] suspend_common(): xhci_pci_suspend+0x0/0xc0 [xhci_pci] returns -110
[   66.044537] xhci_hcd 0000:05:00.0: can't suspend (hcd_pci_runtime_suspend [usbcore] returned -110)
[   68.779597] Intel(R) Wireless WiFi driver for Linux
[   68.779599] Copyright(c) 2003- 2015 Intel Corporation
[   68.781222] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   68.797245] iwldvm: unknown parameter 'iwlwifi' ignored
[   68.797349] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   68.797350] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   68.797351] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   68.797353] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[   68.826739] ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs'
[   68.831020] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   70.166615] e1000e 0000:00:19.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   70.274350] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   72.299370] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   72.588121] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   72.670154] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   76.375312] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   76.664980] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   76.746178] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   77.124381] e1000e 0000:00:19.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   77.253152] e1000e: enp0s25 NIC Link is Down
[   77.403152] e1000e 0000:00:19.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   77.510491] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   77.670531] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   77.959232] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   78.039489] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   87.373989] wlp3s0: authenticate with a0:f3:c1:77:fa:82
[   87.376793] wlp3s0: send auth to a0:f3:c1:77:fa:82 (try 1/3)
[   87.475095] wlp3s0: authenticated
[   87.476694] wlp3s0: associate with a0:f3:c1:77:fa:82 (try 1/3)
[   87.478149] wlp3s0: RX AssocResp from a0:f3:c1:77:fa:82 (capab=0x11 status=0 aid=1)
[   87.495331] wlp3s0: associated
[   87.606283] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  141.580199] xhci_hcd 0000:05:00.0: remove, state 4
[  141.580219] usb usb4: USB disconnect, device number 1
[  141.580769] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[  141.580787] xhci_hcd 0000:05:00.0: remove, state 4
[  141.580803] usb usb3: USB disconnect, device number 1
[  141.581205] xhci_hcd 0000:05:00.0: Host halt failed, -19
[  141.581211] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[  141.581707] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[  144.373757] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  144.373868] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  144.374266] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[  144.383415] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[  144.383487] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  144.383959] xhci_hcd 0000:05:00.0: Resetting
[  145.807739] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  145.807747] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[  145.813036] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[  145.813478] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[  145.813480] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  145.813481] usb usb3: Product: xHCI Host Controller
[  145.813482] usb usb3: Manufacturer: Linux 4.16.4-1-ARCH xhci-hcd
[  145.813483] usb usb3: SerialNumber: 0000:05:00.0
[  145.813590] hub 3-0:1.0: USB hub found
[  145.813648] hub 3-0:1.0: 2 ports detected
[  145.813747] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  145.813750] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[  145.816569] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  145.816589] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[  145.816591] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  145.816592] usb usb4: Product: xHCI Host Controller
[  145.816593] usb usb4: Manufacturer: Linux 4.16.4-1-ARCH xhci-hcd
[  145.816594] usb usb4: SerialNumber: 0000:05:00.0
[  145.816719] hub 4-0:1.0: USB hub found
[  145.816781] hub 4-0:1.0: 2 ports detected
[  146.143248] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[  146.288934] usb 3-1: New USB device found, idVendor=0781, idProduct=5583
[  146.288942] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  146.288947] usb 3-1: Product: Ultra Fit
[  146.288951] usb 3-1: Manufacturer: SanDisk
[  146.288955] usb 3-1: SerialNumber: xxxxxxxxxxx
[  146.927917] usb-storage 3-1:1.0: USB Mass Storage device detected
[  146.928123] scsi host4: usb-storage 3-1:1.0
[  146.928255] usbcore: registered new interface driver usb-storage
[  146.931179] usbcore: registered new interface driver uas
[  158.173767] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[  158.175260] xhci_hcd 0000:05:00.0: HC died; cleaning up
[  158.176800] usb 3-1: USB disconnect, device number 2
[  159.973357] xhci_hcd 0000:05:00.0: remove, state 4
[  159.973375] usb usb4: USB disconnect, device number 1
[  159.973895] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[  159.973910] xhci_hcd 0000:05:00.0: remove, state 1
[  159.973922] usb usb3: USB disconnect, device number 1
[  159.974321] xhci_hcd 0000:05:00.0: Host halt failed, -19
[  159.974328] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[  159.974838] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[  161.940166] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  161.940280] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  161.940679] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[  161.949901] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[  161.949972] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  161.950399] xhci_hcd 0000:05:00.0: Resetting
[  163.701788] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  163.701794] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[  163.707072] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[  163.707495] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[  163.707496] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  163.707498] usb usb3: Product: xHCI Host Controller
[  163.707499] usb usb3: Manufacturer: Linux 4.16.4-1-ARCH xhci-hcd
[  163.707500] usb usb3: SerialNumber: 0000:05:00.0
[  163.707602] hub 3-0:1.0: USB hub found
[  163.707660] hub 3-0:1.0: 2 ports detected
[  163.707758] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  163.707761] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[  163.710598] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  163.710626] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[  163.710628] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  163.710630] usb usb4: Product: xHCI Host Controller
[  163.710631] usb usb4: Manufacturer: Linux 4.16.4-1-ARCH xhci-hcd
[  163.710633] usb usb4: SerialNumber: 0000:05:00.0
[  163.710773] hub 4-0:1.0: USB hub found
[  163.710834] hub 4-0:1.0: 2 ports detected
[  164.036407] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[  164.182106] usb 3-1: New USB device found, idVendor=0781, idProduct=5583
[  164.182113] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  164.182118] usb 3-1: Product: Ultra Fit
[  164.182122] usb 3-1: Manufacturer: SanDisk
[  164.182126] usb 3-1: SerialNumber: xxxxxxxxxxx
[  164.184089] usb-storage 3-1:1.0: USB Mass Storage device detected
[  164.184639] scsi host4: usb-storage 3-1:1.0
[  164.413140] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[  164.413715] xhci_hcd 0000:05:00.0: HC died; cleaning up
[  164.414190] usb 3-1: USB disconnect, device number 2
[  169.433996] xhci_hcd 0000:05:00.0: remove, state 4
[  169.434004] usb usb4: USB disconnect, device number 1
[  169.434194] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[  169.434200] xhci_hcd 0000:05:00.0: remove, state 1
[  169.434205] usb usb3: USB disconnect, device number 1
[  169.434422] xhci_hcd 0000:05:00.0: Host halt failed, -19
[  169.434429] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[  169.434737] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[  169.540320] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  169.540450] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  169.540895] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[  169.541437] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[  169.541510] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  169.542088] xhci_hcd 0000:05:00.0: Resetting
[  170.954240] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  170.954249] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[  170.959544] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[  170.959972] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[  170.959973] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  170.959975] usb usb3: Product: xHCI Host Controller
[  170.959976] usb usb3: Manufacturer: Linux 4.16.4-1-ARCH xhci-hcd
[  170.959977] usb usb3: SerialNumber: 0000:05:00.0
[  170.960089] hub 3-0:1.0: USB hub found
[  170.960147] hub 3-0:1.0: 2 ports detected
[  170.960249] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  170.960253] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[  170.963066] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  170.963098] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[  170.963100] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  170.963101] usb usb4: Product: xHCI Host Controller
[  170.963103] usb usb4: Manufacturer: Linux 4.16.4-1-ARCH xhci-hcd
[  170.963105] usb usb4: SerialNumber: 0000:05:00.0
[  170.963260] hub 4-0:1.0: USB hub found
[  170.963322] hub 4-0:1.0: 2 ports detected
[  171.551205] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[  171.551981] xhci_hcd 0000:05:00.0: HC died; cleaning up
[  171.901022] usb usb4-port1: couldn't allocate usb_device
[  171.901115] usb usb3-port1: couldn't allocate usb_device

And the dmesg, where it works, but also not, when put into the expresscardslot at boot time. It works, after bootup fininshed, and taken out and put in again.

[    0.000000] Linux version 4.6.2-1-ARCH (builduser@tobias) (gcc version 6.1.1 20160602 (GCC) ) #1 SMP PREEMPT Wed Jun 8 08:40:59 CEST 2016
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-4.6.2-1-ARCH "acpi_osi=!Windows 2012" root=/dev/mapper/cryptroot-x220 cryptdevice=/dev/disk/by-uuid/2496684d-15dd-4c17-b7cb-44fdd0f99cb6:cryptroot-x220 zfs=rpool-x220/ROOT/rootfs zswap.enabled=1 zswap.compressor=lz4 boot=zfs root=ZFS=rpool-x220/ROOT/rootfs rw acpi_osi=Linux threadirqs pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 verbose
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000da59efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da59f000-0x00000000daa9efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daa9f000-0x00000000dab9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dab9f000-0x00000000dabfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dabff000-0x00000000dabfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dac00000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO 4291Y1C/4291Y1C, BIOS 8DET50WW (1.20 ) 07/07/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 0DAC00000 mask FFFC00000 uncachable
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 200000000 mask E00000000 write-back
[    0.000000]   8 base 400000000 mask FE0000000 write-back
[    0.000000]   9 base 41F000000 mask FFF000000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xdac00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdac00 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x01b4f000, 0x01b4ffff] PGTABLE
[    0.000000] BRK [0x01b50000, 0x01b50fff] PGTABLE
[    0.000000] BRK [0x01b51000, 0x01b51fff] PGTABLE
[    0.000000] BRK [0x01b52000, 0x01b52fff] PGTABLE
[    0.000000] BRK [0x01b53000, 0x01b53fff] PGTABLE
[    0.000000] BRK [0x01b54000, 0x01b54fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x370fc000-0x37875fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DABFE120 0000B4 (v01 LENOVO TP-8D    00001200 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000DABE6000 0000F4 (v04 LENOVO TP-8D    00001200 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000DABE9000 00F322 (v01 LENOVO TP-8D    00001200 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000DAB2D000 000040
[    0.000000] ACPI: FACS 0x00000000DAB2D000 000040
[    0.000000] ACPI: SLIC 0x00000000DABFD000 000176 (v01 LENOVO TP-8D    00001200 PTEC 00000001)
[    0.000000] ACPI: SSDT 0x00000000DABFC000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DABFB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DABFA000 00076D (v01 LENOVO SataSec  00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DABF9000 0008F7 (v01 LENOVO SataPri  00001000 INTL 20061109)
[    0.000000] ACPI: HPET 0x00000000DABE5000 000038 (v01 LENOVO TP-8D    00001200 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000DABE4000 000098 (v01 LENOVO TP-8D    00001200 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000DABE3000 00003C (v01 LENOVO TP-8D    00001200 PTL  00000002)
[    0.000000] ACPI: ECDT 0x00000000DABE2000 000052 (v01 LENOVO TP-8D    00001200 PTL  00000002)
[    0.000000] ACPI: ASF! 0x00000000DABE8000 0000A5 (v32 LENOVO TP-8D    00001200 PTL  00000002)
[    0.000000] ACPI: TCPA 0x00000000DABE1000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[    0.000000] ACPI: SSDT 0x00000000DABE0000 000A27 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DABDF000 000996 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: DMAR 0x00000000DABDE000 0000E8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: UEFI 0x00000000DABDD000 00003E (v01 LENOVO TP-8D    00001200 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DABDC000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000DABDB000 00026A (v01 LENOVO TP-8D    00001200 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41e5ed000-0x41e5f0fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041e5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000da59efff]
[    0.000000]   node   0: [mem 0x00000000dabff000-0x00000000dabfffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041e5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff]
[    0.000000] On node 0 totalpages: 4164412
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13911 pages used for memmap
[    0.000000]   DMA32 zone: 890272 pages, LIFO batch:31
[    0.000000]   Normal zone: 51096 pages used for memmap
[    0.000000]   Normal zone: 3270144 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xda59f000-0xdaa9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaa9f000-0xdab9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdab9f000-0xdabfefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdac00000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff88041e200000 s93464 r8192 d29416 u262144
[    0.000000] pcpu-alloc: s93464 r8192 d29416 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4099185
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-4.6.2-1-ARCH "acpi_osi=!Windows 2012" root=/dev/mapper/cryptroot-x220 cryptdevice=/dev/disk/by-uuid/2496684d-15dd-4c17-b7cb-44fdd0f99cb6:cryptroot-x220 zfs=rpool-x220/ROOT/rootfs zswap.enabled=1 zswap.compressor=lz4 boot=zfs root=ZFS=rpool-x220/ROOT/rootfs rw acpi_osi=Linux threadirqs pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 verbose
[    0.000000] PCIe ASPM is forcibly enabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16308196K/16657648K available (5935K kernel code, 974K rwdata, 1796K rodata, 1224K init, 1152K bss, 349452K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:8448 nr_irqs:488 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2491.945 MHz processor
[    0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4985.55 BogoMIPS (lpj=8306483)
[    0.000037] pid_max: default: 32768 minimum: 301
[    0.000042] ACPI: Core revision 20160108
[    0.012136] ACPI: 7 ACPI AML tables successfully acquired and loaded

[    0.012158] Security Framework initialized
[    0.012160] Yama: becoming mindful.
[    0.013097] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.016224] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.017596] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.017614] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.017863] Disabled fast string operations
[    0.017866] CPU: Physical Processor ID: 0
[    0.017867] CPU: Processor Core ID: 0
[    0.017871] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.017872] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.017874] mce: CPU supports 7 MCE banks
[    0.017885] CPU0: Thermal monitoring enabled (TM1)
[    0.017891] process: using mwait in idle threads
[    0.017894] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.017895] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.018263] Freeing SMP alternatives memory: 24K (ffffffff81a27000 - ffffffff81a2d000)
[    0.020063] ftrace: allocating 23494 entries in 92 pages
[    0.030237] smpboot: Max logical packages: 4
[    0.030241] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.030252] DMAR: Host address width 36
[    0.030253] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.030258] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.030259] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.030263] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.030264] DMAR: RMRR base: 0x000000da8d5000 end: 0x000000da8ebfff
[    0.030267] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.030269] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.030270] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.030271] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.030677] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.030679] x2apic enabled
[    0.030685] Switched APIC routing to cluster x2apic.
[    0.031114] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064123] TSC deadline timer enabled
[    0.064126] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.064139] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.064158] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.064160] ... version:                3
[    0.064161] ... bit width:              48
[    0.064162] ... generic registers:      4
[    0.064162] ... value mask:             0000ffffffffffff
[    0.064163] ... max period:             0000ffffffffffff
[    0.064164] ... fixed-purpose events:   3
[    0.064165] ... event mask:             000000070000000f
[    0.084417] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100907] x86: Booting SMP configuration:
[    0.100912] .... node  #0, CPUs:      #1
[    0.101666] Disabled fast string operations
[    0.197640]  #2
[    0.198346] Disabled fast string operations
[    0.295062]  #3
[    0.295062] Disabled fast string operations
[    0.379768] x86: Booted up 1 node, 4 CPUs
[    0.379772] smpboot: Total of 4 processors activated (19948.78 BogoMIPS)
[    0.383239] devtmpfs: initialized
[    0.383302] x86/mm: Memory block size: 128MB
[    0.386862] PM: Registering ACPI NVS region [mem 0xdaa9f000-0xdab9efff] (1048576 bytes)
[    0.386944] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.387007] pinctrl core: initialized pinctrl subsystem
[    0.387058] RTC time:  6:00:45, date: 05/05/18
[    0.387162] NET: Registered protocol family 16
[    0.399417] cpuidle: using governor ladder
[    0.409751] cpuidle: using governor menu
[    0.409891] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.409893] ACPI: bus type PCI registered
[    0.409895] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.410126] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.410128] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.410133] PCI: Using configuration type 1 for base access
[    0.410174] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.426329] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.426558] ACPI: Added _OSI(Module Device)
[    0.426560] ACPI: Added _OSI(Processor Device)
[    0.426561] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.426562] ACPI: Added _OSI(Processor Aggregator Device)
[    0.426563] ACPI: Deleted _OSI(Windows 2012)
[    0.426565] ACPI: Added _OSI(Linux)
[    0.426695] ACPI : EC: EC description table is found, configuring boot EC
[    0.426708] ACPI : EC: EC started
[    0.430697] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[    0.434188] ACPI: Dynamic OEM Table Load:
[    0.434198] ACPI: SSDT 0xFFFF88040B54C000 0008C0 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.434726] ACPI: Dynamic OEM Table Load:
[    0.434733] ACPI: SSDT 0xFFFF88040B53A000 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.435194] ACPI: Dynamic OEM Table Load:
[    0.435199] ACPI: SSDT 0xFFFF88040B511600 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.436040] ACPI: Interpreter enabled
[    0.436057] ACPI: (supports S0 S3 S4 S5)
[    0.436058] ACPI: Using IOAPIC for interrupt routing
[    0.436078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.438969] ACPI: Power Resource [PUBS] (on)
[    0.439794] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.440701] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.442785] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[    0.443172] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.443255] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[    0.443325] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.443393] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.443460] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
[    0.443514] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.443582] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
[    0.443648] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[    0.443730] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.443735] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.443874] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.443937] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.443940] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.443942] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.443943] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.443952] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.444096] PCI host bridge to bus 0000:00
[    0.444098] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.444100] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.444101] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.444103] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.444104] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[    0.444106] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.444113] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.444190] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.444199] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.444205] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.444209] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.444302] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.444324] pci 0000:00:16.0: reg 0x10: [mem 0xf2625000-0xf262500f 64bit]
[    0.444399] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.444464] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[    0.444481] pci 0000:00:16.3: reg 0x10: [io  0x50e0-0x50e7]
[    0.444491] pci 0000:00:16.3: reg 0x14: [mem 0xf262b000-0xf262bfff]
[    0.444620] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.444636] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[    0.444645] pci 0000:00:19.0: reg 0x14: [mem 0xf262a000-0xf262afff]
[    0.444653] pci 0000:00:19.0: reg 0x18: [io  0x5060-0x507f]
[    0.444714] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.444743] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.444784] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.444802] pci 0000:00:1a.0: reg 0x10: [mem 0xf2629000-0xf26293ff]
[    0.444886] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.444916] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.444957] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.444974] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[    0.445047] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.445084] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.445124] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.445195] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.445263] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.445339] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.445407] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.445482] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.445517] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.445559] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.445685] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.445766] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.445784] pci 0000:00:1d.0: reg 0x10: [mem 0xf2628000-0xf26283ff]
[    0.445868] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.445898] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.445937] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.446095] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018a
[    0.446110] pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
[    0.446117] pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
[    0.446125] pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
[    0.446133] pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
[    0.446141] pci 0000:00:1f.2: reg 0x20: [io  0x50b0-0x50bf]
[    0.446149] pci 0000:00:1f.2: reg 0x24: [io  0x50a0-0x50af]
[    0.446159] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.446160] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.446162] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.446163] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.446237] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.446253] pci 0000:00:1f.3: reg 0x10: [mem 0xf2624000-0xf26240ff 64bit]
[    0.446274] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.446350] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
[    0.446364] pci 0000:00:1f.5: reg 0x10: [io  0x50c8-0x50cf]
[    0.446372] pci 0000:00:1f.5: reg 0x14: [io  0x50ec-0x50ef]
[    0.446380] pci 0000:00:1f.5: reg 0x18: [io  0x50c0-0x50c7]
[    0.446387] pci 0000:00:1f.5: reg 0x1c: [io  0x50e8-0x50eb]
[    0.446395] pci 0000:00:1f.5: reg 0x20: [io  0x5090-0x509f]
[    0.446403] pci 0000:00:1f.5: reg 0x24: [io  0x5080-0x508f]
[    0.446529] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.446732] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[    0.446908] pci 0000:03:00.0: reg 0x10: [mem 0xf2500000-0xf2501fff 64bit]
[    0.447613] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.453403] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.453410] pci 0000:00:1c.1:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.453500] acpiphp: Slot [1] registered
[    0.453548] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[    0.453603] pci 0000:05:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
[    0.453865] pci 0000:05:00.0: PME# supported from D0 D3hot
[    0.459527] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.459537] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.459546] pci 0000:00:1c.3:   bridge window [mem 0xf1c00000-0xf24fffff]
[    0.459560] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.459858] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
[    0.459880] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[    0.459907] pci 0000:0d:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[    0.460158] pci 0000:0d:00.0: supports D1 D2
[    0.460159] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.466793] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.466798] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.466802] pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.466810] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.467854] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.467923] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.468019] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.468021] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.468024] vgaarb: loaded
[    0.468025] vgaarb: bridge control possible 0000:00:02.0
[    0.468125] PCI: Using ACPI for IRQ routing
[    0.470222] PCI: pci_cache_line_size set to 64 bytes
[    0.470679] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.470681] e820: reserve RAM buffer [mem 0xda59f000-0xdbffffff]
[    0.470682] e820: reserve RAM buffer [mem 0xdac00000-0xdbffffff]
[    0.470683] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
[    0.470803] NetLabel: Initializing
[    0.470804] NetLabel:  domain hash size = 128
[    0.470805] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.470814] NetLabel:  unlabeled traffic allowed by default
[    0.470887] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.470892] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.472916] clocksource: Switched to clocksource hpet
[    0.477925] VFS: Disk quotas dquot_6.6.0
[    0.477942] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.478037] pnp: PnP ACPI init
[    0.478403] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.478405] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.478407] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.478409] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.478410] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.478412] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.478413] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.478415] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.478416] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.478418] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.478419] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.478420] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.478422] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.478423] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.478425] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.478427] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.478428] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.478432] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.478531] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.478533] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.478535] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.478536] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.478538] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.478540] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.478542] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.478544] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.478545] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.478547] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.478548] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.478550] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.478552] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.478600] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.478622] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.478643] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[    0.478684] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.479201] pnp: PnP ACPI: found 6 devices
[    0.485480] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.485525] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.485538] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.485543] pci 0000:00:1c.1:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.485551] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.485554] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.485560] pci 0000:00:1c.3:   bridge window [mem 0xf1c00000-0xf24fffff]
[    0.485564] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.485570] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.485573] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.485580] pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.485585] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.485595] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.485596] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.485598] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.485599] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[    0.485600] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[    0.485602] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[    0.485604] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.485605] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf24fffff]
[    0.485606] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.485608] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.485609] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
[    0.485610] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.485637] NET: Registered protocol family 2
[    0.485816] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.486042] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.486161] TCP: Hash tables configured (established 131072 bind 65536)
[    0.486196] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.486273] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.486364] NET: Registered protocol family 1
[    0.486382] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.493695] pci 0000:05:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[    0.493796] PCI: CLS 64 bytes, default 64
[    0.493844] Unpacking initramfs...
[    0.616697] Freeing initrd memory: 7656K (ffff8800370fc000 - ffff880037876000)
[    0.616725] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.616727] software IO TLB [mem 0xd659f000-0xda59f000] (64MB) mapped at [ffff8800d659f000-ffff8800da59efff]
[    0.616802] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    0.616804] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    0.616805] RAPL PMU: hw unit of domain package 2^-16 Joules
[    0.616806] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    0.616911] Scanning for low memory corruption every 60 seconds
[    0.617223] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.617629] Initialise system trusted keyring
[    0.617720] workingset: timestamp_bits=38 max_order=22 bucket_order=0
[    0.619295] zbud: loaded
[    0.619538] Key type big_key registered
[    0.619814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.619847] io scheduler noop registered
[    0.619851] io scheduler deadline registered
[    0.619883] io scheduler cfq registered (default)
[    0.620291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.620298] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.620309] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.620310] vesafb: scrolling: redraw
[    0.620312] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.620322] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001c00000, using 3072k, total 3072k
[    0.671484] Console: switching to colour frame buffer device 128x48
[    0.722490] fb0: VESA VGA frame buffer device
[    0.722514] intel_idle: MWAIT substates: 0x21120
[    0.722515] intel_idle: v0.4.1 model 0x2A
[    0.722656] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.722679] GHES: HEST is not enabled!
[    0.722739] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.743500] 0000:00:16.3: ttyS0 at I/O 0x50e0 (irq = 19, base_baud = 115200) is a 16550A
[    0.743707] Linux agpgart interface v0.103
[    0.744085] rtc_cmos 00:02: RTC can wake from S4
[    0.744245] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.744337] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.744348] Intel P-state driver initializing.
[    0.839862] ledtrig-cpu: registered to indicate activity on CPUs
[    0.841644] NET: Registered protocol family 10
[    0.842127] NET: Registered protocol family 17
[    0.842707] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x18
[    0.842731] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x18
[    0.842755] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x18
[    0.842787] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x18
[    0.842906] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.843383] registered taskstats version 1
[    0.843411] Loading compiled-in X.509 certificates
[    0.847917] zswap: loaded using pool lz4/zbud
[    0.848725]   Magic number: 2:962:12
[    0.848810] memory memory56: hash matches
[    0.848908] rtc_cmos 00:02: setting system clock to 2018-05-05 06:00:46 UTC (1525500046)
[    0.849059] PM: Hibernation image not present or could not be loaded.
[    0.851570] Freeing unused kernel memory: 1224K (ffffffff818f5000 - ffffffff81a27000)
[    0.851575] Write protecting the kernel read-only data: 8192k
[    0.851970] Freeing unused kernel memory: 192K (ffff8800015d0000 - ffff880001600000)
[    0.853544] Freeing unused kernel memory: 252K (ffff8800017c1000 - ffff880001800000)
[    0.868769] random: systemd-tmpfile urandom read with 2 bits of entropy available
[    0.874812] device-mapper: uevent: version 1.0.3
[    0.874950] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.875131] zavl: module license 'CDDL' taints kernel.
[    0.875134] Disabling lock debugging due to kernel taint
[    0.879322] SPL: Loaded module v0.6.5.7-1
[    0.901801] ZFS: Loaded module v0.6.5.7-1, ZFS pool version 5000, ZFS filesystem version 5
[    0.942707] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.945779] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.945797] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.953715] ACPI: bus type USB registered
[    0.953759] usbcore: registered new interface driver usbfs
[    0.953778] usbcore: registered new interface driver hub
[    0.953820] usbcore: registered new device driver usb
[    0.954760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.955173] ehci-pci: EHCI PCI platform driver
[    0.955353] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.955367] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.955385] ehci-pci 0000:00:1a.0: debug port 2
[    0.955395] sdhci: Secure Digital Host Controller Interface driver
[    0.955399] sdhci: Copyright(c) Pierre Ossman
[    0.955819] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4)
[    0.957755] SCSI subsystem initialized
[    0.959305] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.959480] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf2629000
[    0.959720] libata version 3.00 loaded.
[    0.960970] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[    0.966040] AVX version of gcm_enc/dec engaged.
[    0.966044] AES CTR mode by8 optimization enabled
[    0.966285] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.966791] hub 1-0:1.0: USB hub found
[    0.966810] hub 1-0:1.0: 3 ports detected
[    0.967096] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.967108] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[    0.999592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.272933] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.397626] hub 1-1:1.0: USB hub found
[    1.397854] hub 1-1:1.0: 6 ports detected
[    1.619603] tsc: Refined TSC clocksource calibration: 2491.898 MHz
[    1.619610] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23eb541e75b, max_idle_ns: 440795289606 ns
[    1.669593] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    1.836257] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    1.992917] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    2.619653] clocksource: Switched to clocksource tsc
[   48.985457] xhci_hcd 0000:05:00.0: can't setup: -110
[   48.985843] xhci_hcd 0000:05:00.0: USB bus 2 deregistered
[   48.985889] ehci-pci 0000:00:1d.0: EHCI Host Controller
[   48.985897] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   48.985904] xhci_hcd 0000:05:00.0: init 0000:05:00.0 fail, -110
[   48.985911] ehci-pci 0000:00:1d.0: debug port 2
[   48.986385] xhci_hcd: probe of 0000:05:00.0 failed with error -110
[   48.989806] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[   48.990035] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2628000
[   48.998796] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[   48.999249] hub 2-0:1.0: USB hub found
[   48.999265] hub 2-0:1.0: 3 ports detected
[   48.999576] ata_piix 0000:00:1f.2: version 2.13
[   48.999719] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   49.154295] scsi host0: ata_piix
[   49.154785] scsi host1: ata_piix
[   49.154967] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x50b0 irq 14
[   49.154978] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x50b8 irq 15
[   49.155224] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[   49.305455] usb 2-1: new high-speed USB device number 2 using ehci-pci
[   49.306782] scsi host2: ata_piix
[   49.307354] scsi host3: ata_piix
[   49.307534] ata3: SATA max UDMA/133 cmd 0x50c8 ctl 0x50ec bmdma 0x5090 irq 19
[   49.307542] ata4: SATA max UDMA/133 cmd 0x50c0 ctl 0x50e8 bmdma 0x5098 irq 19
[   49.430500] hub 2-1:1.0: USB hub found
[   49.430702] hub 2-1:1.0: 8 ports detected
[   49.631018] ata3: SATA link down (SStatus 0 SControl 300)
[   49.928900] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   49.928930] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   49.934374] ata1.00: supports DRM functions and may not be fully accessible
[   49.934387] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133
[   49.934393] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[   49.934409] ata1.01: supports DRM functions and may not be fully accessible
[   49.934414] ata1.01: ATA-10: Crucial_CT250MX200SSD3, MU02, max UDMA/133
[   49.934418] ata1.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   49.938527] ata1.00: supports DRM functions and may not be fully accessible
[   49.938547] ata1.00: configured for UDMA/133
[   49.941357] ata1.01: supports DRM functions and may not be fully accessible
[   49.942711] ata1.01: configured for UDMA/133
[   49.943361] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  DB6Q PQ: 0 ANSI: 5
[   49.989766] scsi 0:0:1:0: Direct-Access     ATA      Crucial_CT250MX2 MU02 PQ: 0 ANSI: 5
[   50.325478] ata4: failed to resume link (SControl 0)
[   50.337424] ata4: SATA link down (SStatus 4 SControl 0)
[   50.485500] ata2.01: failed to resume link (SControl 0)
[   50.497493] ata2.00: SATA link down (SStatus 0 SControl 300)
[   50.497518] ata2.01: SATA link down (SStatus 4 SControl 0)
[   50.505566] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[   50.505686] ata1.01: Enabling discard_zeroes_data
[   50.505727] sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[   50.505737] sd 0:0:1:0: [sdb] 4096-byte physical blocks
[   50.505920] sd 0:0:0:0: [sda] Write Protect is off
[   50.505942] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   50.505988] sd 0:0:1:0: [sdb] Write Protect is off
[   50.505999] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   50.506018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   50.506064] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   50.506456] ata1.01: Enabling discard_zeroes_data
[   50.512827]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
[   50.512992]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 sdb16 sdb17 sdb19
[   50.514720] sd 0:0:0:0: [sda] Attached SCSI disk
[   50.515533] ata1.01: Enabling discard_zeroes_data
[   50.515770] sd 0:0:1:0: [sdb] Attached SCSI disk
[   58.842445] random: nonblocking pool is initialized
[   61.641565] NET: Registered protocol family 38
[   62.656988] SPL: using hostid 0x78313078
[   67.728525] ip_tables: (C) 2000-2006 Netfilter Core Team
[   67.731950] cgroup: cgroup2: unknown option "nsdelegate"
[   67.736869] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[   67.737118] systemd[1]: Detected architecture x86-64.
[   67.778330] systemd[1]: Set hostname to <machine1.example.com>.
[   67.992633] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[   67.992644] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   68.137217] systemd[1]: Listening on LVM2 metadata daemon socket.
[   68.138774] systemd[1]: Listening on udev Kernel Socket.
[   68.139927] systemd[1]: Reached target Swap.
[   68.140924] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   68.144155] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[   68.145701] systemd[1]: Listening on RPCbind Server Activation Socket.
[   68.147064] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   68.148754] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   68.149983] systemd[1]: Listening on udev Control Socket.
[   68.151263] systemd[1]: Created slice system-getty.slice.
[   68.152276] systemd[1]: Reached target Host and Network Name Lookups.
[   68.153511] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   68.161212] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   68.163004] systemd[1]: Listening on Journal Socket.
[   68.175316] systemd[1]: Mounting POSIX Message Queue File System...
[   68.183695] systemd[1]: Starting Set Up Additional Binary Formats...
[   68.194724] systemd[1]: Starting Load Kernel Modules...
[   68.196161] systemd[1]: Starting Remount Root and Kernel File Systems...
[   68.211838] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   68.211884] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   68.242293] systemd[1]: Starting RPC Bind...
[   68.301928] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   68.334325] systemd[1]: Mounting NFSD configuration filesystem...
[   68.351337] RPC: Registered named UNIX socket transport module.
[   68.351337] RPC: Registered udp transport module.
[   68.351338] RPC: Registered tcp transport module.
[   68.351338] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   68.361607] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   68.368689] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   68.387800] systemd[1]: Starting udev Coldplug all Devices...
[   68.405840] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   68.422900] systemd[1]: Listening on LVM2 poll daemon socket.
[   68.439639] systemd[1]: Reached target RPC Port Mapper.
[   68.460832] systemd[1]: Listening on Process Core Dump Socket.
[   68.488797] systemd[1]: Mounting Kernel Debug File System...
[   68.555452] systemd[1]: Mounting Huge Pages File System...
[   68.589151] systemd[1]: Mounting Temporary Directory (/tmp)...
[   68.615853] systemd[1]: Created slice User and Session Slice.
[   68.639286] systemd[1]: Reached target Slices.
[   68.660836] systemd[1]: Listening on Journal Socket (/dev/log).
[   68.692262] systemd[1]: Starting Journal Service...
[   68.716585] systemd[1]: Started RPC Bind.
[   68.734532] systemd[1]: Mounted POSIX Message Queue File System.
[   68.751504] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[   68.751647] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[   68.751995] systemd[1]: Failed to start Load Kernel Modules.
[   68.799450] systemd[1]: Started Journal Service.
[   69.349823] systemd-journald[5306]: Received request to flush runtime journal from PID 1
[   69.473315] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[   69.473486] ACPI: Lid Switch [LID]
[   69.473563] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[   69.473566] ACPI: Sleep Button [SLPB]
[   69.473628] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   69.473631] ACPI: Power Button [PWRF]
[   69.477938] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   69.478551] pps_core: LinuxPPS API ver. 1 registered
[   69.478554] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   69.481094] PTP clock support registered
[   69.485007] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[   69.488735] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[   69.494576] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   69.494579] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   69.494742] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   69.502224] ACPI: AC Adapter [AC] (on-line)
[   69.508323] [drm] Initialized drm 1.1.0 20060810
[   69.523454] ACPI: Battery Slot [BAT0] (battery present)
[   69.529176] Non-volatile memory driver v1.3
[   69.532936] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   69.532940] thinkpad_acpi: http://ibm-acpi.sf.net/
[   69.532942] thinkpad_acpi: ThinkPad BIOS 8DET50WW (1.20 ), EC unknown
[   69.532944] thinkpad_acpi: Lenovo ThinkPad X220, model 4291Y1C
[   69.533517] thinkpad_acpi: radio switch found; radios are enabled
[   69.533657] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[   69.533763] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   69.533765] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   69.535559] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   69.536043] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   69.538191] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[   69.543585] Setting dangerous option enable_rc6 - tainting kernel
[   69.543591] Setting dangerous option enable_fbc - tainting kernel
[   69.543593] Setting dangerous option semaphores - tainting kernel
[   69.543596] i915: unknown parameter 'i915_enable_rc6' ignored
[   69.543598] i915: unknown parameter 'i915_enable_fbc' ignored
[   69.543601] i915: unknown parameter 'lvds_downclock' ignored
[   69.557413] wmi: Mapper loaded
[   69.564913] thermal LNXTHERM:00: registered as thermal_zone0
[   69.564917] ACPI: Thermal Zone [THM0] (50 C)
[   69.633141] Intel(R) Wireless WiFi driver for Linux
[   69.633144] Copyright(c) 2003- 2015 Intel Corporation
[   69.667970] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   69.677991] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   69.728654] e1000e 0000:00:19.0 eth0: registered PHC clock
[   69.728659] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:7c:03:b4
[   69.728662] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[   69.728710] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[   69.730310] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   69.730314] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   69.730316] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   69.730319] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[   69.730370] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   69.744667] [drm] Memory usable by graphics device = 2048M
[   69.744671] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   69.744673] fb: switching to inteldrmfb from VESA VGA
[   69.744692] Console: switching to colour dummy device 80x25
[   69.744824] [drm] Replacing VGA console driver
[   69.753533] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   69.753536] [drm] Driver supports precise vblank timestamp query.
[   69.753872] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   69.759524] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   69.766568] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[   69.767028] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   69.767030] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   69.767031] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[   69.767033] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   69.767034] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   69.767035] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[   69.767037] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[   69.768168] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   69.792061] intel_rapl: Found RAPL domain package
[   69.792066] intel_rapl: Found RAPL domain core
[   69.792068] intel_rapl: Found RAPL domain uncore
[   69.792077] intel_rapl: RAPL package 0 domain package locked by BIOS
[   69.798673] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   69.799012] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   69.799085] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   69.799160] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   69.799296] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   69.799432] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   69.821220] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   69.823862] acpi device:00: registered as cooling_device5
[   69.823965] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[   69.824104] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[   69.824177] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20160108/utaddress-255)
[   69.824183] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   69.824187] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20160108/utaddress-255)
[   69.824191] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   69.824193] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20160108/utaddress-255)
[   69.824197] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   69.824198] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20160108/utaddress-255)
[   69.824202] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   69.824203] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   69.824994] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   69.988282] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   70.248459] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[   70.266178] fbcon: inteldrmfb (fb0) is primary device
[   70.272299] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   70.363657] iTCO_vendor_support: vendor-support=0
[   70.364540] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   70.364609] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   70.364687] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   70.557522] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[   70.635158] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180
[   70.635165] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[   70.684421] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   70.687368] mousedev: PS/2 mouse device common for all mice
[   71.349208] Console: switching to colour frame buffer device 170x48
[   71.353561] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   71.418387] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   71.481811] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: data=ordered
[   71.490942] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[   71.533253] media: Linux media interface: v0.10
[   71.552715] Linux video capture interface: v2.00
[   71.555627] Bluetooth: Core ver 2.21
[   71.557123] NET: Registered protocol family 31
[   71.557126] Bluetooth: HCI device and connection manager initialized
[   71.557130] Bluetooth: HCI socket layer initialized
[   71.557134] Bluetooth: L2CAP socket layer initialized
[   71.557141] Bluetooth: SCO socket layer initialized
[   71.621822] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[   71.623559] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[   71.623563] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[   71.623566] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[   71.623808] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16
[   71.624003] usbcore: registered new interface driver uvcvideo
[   71.624005] USB Video Class driver (1.1.1)
[   71.629436] usbcore: registered new interface driver btusb
[   71.668171] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input15
[   74.674688] e1000e 0000:00:19.0 enp0s25: changing MTU from 1500 to 8450
[   74.674696] e1000e 0000:00:19.0: Interrupt Throttle Rate off
[   75.012175] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   75.012184] Bluetooth: BNEP filters: protocol multicast
[   75.012194] Bluetooth: BNEP socket layer initialized
[   75.344507] FS-Cache: Loaded
[   75.413593] FS-Cache: Netfs 'nfs' registered for caching
[   75.482942] Key type dns_resolver registered
[   75.586221] NFS: Registering the id_resolver key type
[   75.586243] Key type id_resolver registered
[   75.586246] Key type id_legacy registered
[   75.660740] NET: Registered protocol family 3
[   76.047776] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   76.047969] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   76.048074] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   76.382580] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   76.382761] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   76.382861] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   76.470463] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   76.538988] NFSD: starting 90-second grace period (net ffffffff818b7bc0)
[   79.628546] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   79.689022] Intel(R) Wireless WiFi driver for Linux
[   79.689026] Copyright(c) 2003- 2015 Intel Corporation
[   79.692068] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   79.694142] iwldvm: unknown parameter 'iwlwifi' ignored
[   79.695751] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   79.695755] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   79.695757] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   79.695760] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[   79.695896] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   79.711647] ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs'
[   79.722355] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   82.268297] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   82.574710] ata1.01: qc timeout (cmd 0xef)
[   82.574715] ata1.01: failed to enable DIPM, Emask 0x4
[   82.574723] ata1.00: hard resetting link
[   82.884220] ata1.01: hard resetting link
[   83.344749] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   83.344767] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   83.347189] ata1.01: supports DRM functions and may not be fully accessible
[   83.350778] ata1.00: supports DRM functions and may not be fully accessible
[   83.353343] ata1.00: supports DRM functions and may not be fully accessible
[   83.353347] ata1.00: configured for UDMA/133
[   83.355837] ata1.01: supports DRM functions and may not be fully accessible
[   83.356927] ata1.01: configured for UDMA/133
[   93.354519] ata1.01: qc timeout (cmd 0xef)
[   93.354524] ata1.01: failed to enable DIPM, Emask 0x4
[   93.354526] ata1.00: disabling LPM on the link
[   93.354531] ata1.01: limiting SATA link speed to 1.5 Gbps
[   93.354533] ata1.01: limiting speed to UDMA/133:PIO3
[   93.354541] ata1.00: hard resetting link
[   93.664049] ata1.01: hard resetting link
[   94.124546] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   94.124564] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   94.126982] ata1.01: supports DRM functions and may not be fully accessible
[   94.130547] ata1.00: supports DRM functions and may not be fully accessible
[   94.133112] ata1.00: supports DRM functions and may not be fully accessible
[   94.133117] ata1.00: configured for UDMA/133
[   94.135617] ata1.01: supports DRM functions and may not be fully accessible
[   94.136705] ata1.01: configured for UDMA/133
[   94.136719] ata1: EH complete
[   94.153233] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   94.153413] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   94.153512] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   94.429720] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   94.429901] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[   94.430000] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   94.516094] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  109.340859] ata1: lost interrupt (Status 0x0)
[  109.340879] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 frozen
[  109.340919] ata1.01: failed command: IDENTIFY DEVICE
[  109.340951] ata1.01: cmd ec/00:01:00:00:00/00:00:00:00:00/50 tag 0 pio 512 in
                        res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[  109.341037] ata1.01: status: { DRDY }
[  109.341068] ata1.00: hard resetting link
[  109.650368] ata1.01: hard resetting link
[  110.110900] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  110.110918] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  110.113336] ata1.01: supports DRM functions and may not be fully accessible
[  110.116899] ata1.00: supports DRM functions and may not be fully accessible
[  110.119465] ata1.00: supports DRM functions and may not be fully accessible
[  110.119470] ata1.00: configured for UDMA/133
[  110.121956] ata1.01: supports DRM functions and may not be fully accessible
[  110.123045] ata1.01: configured for UDMA/133
[  110.123062] ata1: EH complete
[  110.177683] ata1.01: Enabling discard_zeroes_data
[  110.257578] ata1.01: Enabling discard_zeroes_data
[  110.316364] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[  110.316546] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[  110.316645] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  110.594444] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[  110.594625] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[  110.594724] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  110.678831] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  110.965262] e1000e: enp0s25 NIC Link is Down
[  111.337101] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[  111.434786] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[  111.434967] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[  111.435066] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  111.710057] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[  111.710236] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[  111.710335] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  111.795381] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  121.162945] wlp3s0: authenticate with a0:f3:c1:77:fa:82
[  121.165270] wlp3s0: send auth to a0:f3:c1:77:fa:82 (try 1/3)
[  121.254617] wlp3s0: authenticated
[  121.257381] wlp3s0: associate with a0:f3:c1:77:fa:82 (try 1/3)
[  121.258784] wlp3s0: RX AssocResp from a0:f3:c1:77:fa:82 (capab=0x11 status=0 aid=1)
[  121.275579] wlp3s0: associated
[  121.275609] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  221.316580] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  221.316644] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  221.316943] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[  221.323155] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[  221.323196] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  221.323437] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  221.323444] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[  221.328766] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[  221.329181] hub 3-0:1.0: USB hub found
[  221.329191] hub 3-0:1.0: 2 ports detected
[  221.329280] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  221.329283] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[  221.332269] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  221.333142] hub 4-0:1.0: USB hub found
[  221.333156] hub 4-0:1.0: 2 ports detected
[  221.633038] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[  222.390267] usb-storage 3-1:1.0: USB Mass Storage device detected
[  222.390341] scsi host4: usb-storage 3-1:1.0
[  222.390436] usbcore: registered new interface driver usb-storage
[  222.391685] usbcore: registered new interface driver uas
[  223.394397] scsi 4:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[  223.394778] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  223.395019] sd 4:0:0:0: [sdc] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB)
[  223.397224] sd 4:0:0:0: [sdc] Write Protect is off
[  223.397228] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
[  223.398307] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  223.422649]  sdc: sdc1 sdc2 sdc3
[  223.425806] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[  290.618902] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[  290.642974] scsi host5: uas
[  290.648242] scsi 5:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[  290.682040] sd 5:0:0:0: Attached scsi generic sg3 type 0
[  290.682207] sd 5:0:0:0: [sdd] Spinning up disk...
[  291.685067] ..ready
[  292.688542] sd 5:0:0:0: [sdd] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[  292.713855] sd 5:0:0:0: [sdd] Write Protect is off
[  292.713858] sd 5:0:0:0: [sdd] Mode Sense: 4f 00 00 00
[  292.714012] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  292.714388] xhci_hcd 0000:05:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[  292.714770] xhci_hcd 0000:05:00.0: @00000000d1558170 00000000 00000000 1b000000 02038000
[  292.844490]  sdd: sdd1 sdd2 sdd3
[  292.845590] sd 5:0:0:0: [sdd] Attached SCSI disk

And even another older laptop, where it works with a recent kernel:

[    0.000000] Linux version 4.15.15-1-ARCH (builduser@heftig-4572) (gcc version 7.3.1 20180312 (GCC)) #1 SMP PREEMPT Sat Mar 31 23:59:25 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptroot cryptdevice=/dev/disk/by-uuid/8c2a89af-72a1-40cc-982c-bdb60daaf11a:cryptroot zfs=rpool/ROOT/rootfs zswap.enabled=1 zswap.compressor=lz4 boot=zfs root=ZFS=rpool/ROOT/rootfs rw acpi_osi=Linux verbose cpufreq_driver=phc-intel zfs.zfs_arc_max=536870912 intel_iommu=igfx_off
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd6a0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd6a1000-0x00000000bd6a6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd6a7000-0x00000000bd7b6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd7b7000-0x00000000bd80efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd80f000-0x00000000bd8c6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd8c7000-0x00000000bd8d1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd8d2000-0x00000000bd8d4fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bd8d5000-0x00000000bd8d8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd8d9000-0x00000000bd8dcfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd8dd000-0x00000000bd8dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd8e0000-0x00000000bd906fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd907000-0x00000000bd907fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bd908000-0x00000000bdb0efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bdb0f000-0x00000000bdb9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bdb9f000-0x00000000bdbfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bdbff000-0x00000000bdbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdc00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: LENOVO 7440DQ6/7440DQ6, BIOS 7UET86WW (3.16 ) 04/19/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 23C000000 mask FFC000000 uncachable
[    0.000000]   1 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 080000000 mask FC0000000 write-back
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask FC0000000 write-back
[    0.000000]   6 base 0BDE00000 mask FFFE00000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 8094M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbdc00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f6480-0x000f648f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] BRK [0x3f63a000, 0x3f63afff] PGTABLE
[    0.000000] BRK [0x3f63b000, 0x3f63bfff] PGTABLE
[    0.000000] BRK [0x3f63c000, 0x3f63cfff] PGTABLE
[    0.000000] BRK [0x3f63d000, 0x3f63dfff] PGTABLE
[    0.000000] BRK [0x3f63e000, 0x3f63efff] PGTABLE
[    0.000000] BRK [0x3f63f000, 0x3f63ffff] PGTABLE
[    0.000000] BRK [0x3f640000, 0x3f640fff] PGTABLE
[    0.000000] BRK [0x3f641000, 0x3f641fff] PGTABLE
[    0.000000] BRK [0x3f642000, 0x3f642fff] PGTABLE
[    0.000000] BRK [0x3f643000, 0x3f643fff] PGTABLE
[    0.000000] BRK [0x3f644000, 0x3f644fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x366ee000-0x3736efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6440 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000BDB49B7A 00009C (v01 LENOVO TP-7U    00003160  LTP 00000000)
[    0.000000] ACPI: FACP 0x00000000BDB49D00 0000F4 (v03 LENOVO TP-7U    00003160 LNVO 00000001)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20170831/tbfadt-603)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20170831/tbfadt-708)
[    0.000000] ACPI: DSDT 0x00000000BDB4A10E 00FAC1 (v01 LENOVO TP-7U    00003160 MSFT 03000000)
[    0.000000] ACPI: FACS 0x00000000BDB8E000 000040
[    0.000000] ACPI: FACS 0x00000000BDB8E000 000040
[    0.000000] ACPI: SSDT 0x00000000BDB49EB4 00025A (v01 LENOVO TP-7U    00003160 MSFT 03000000)
[    0.000000] ACPI: ECDT 0x00000000BDB59BCF 000052 (v01 LENOVO TP-7U    00003160 LNVO 00000001)
[    0.000000] ACPI: APIC 0x00000000BDB59C21 000078 (v01 LENOVO TP-7U    00003160 LNVO 00000001)
[    0.000000] ACPI: MCFG 0x00000000BDB59C99 00003C (v01 LENOVO TP-7U    00003160 LNVO 00000001)
[    0.000000] ACPI: HPET 0x00000000BDB59CD5 000038 (v01 LENOVO TP-7U    00003160 LNVO 00000001)
[    0.000000] ACPI: SLIC 0x00000000BDB59DC2 000176 (v01 LENOVO TP-7U    00003160  LTP 00000000)
[    0.000000] ACPI: BOOT 0x00000000BDB59F38 000028 (v01 LENOVO TP-7U    00003160  LTP 00000001)
[    0.000000] ACPI: ASF! 0x00000000BDB59F60 0000A0 (v16 LENOVO TP-7U    00003160 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000BDB8D1FA 00072F (v01 LENOVO TP-7U    00003160 INTL 20050513)
[    0.000000] ACPI: SSDT 0x00000000BDB8D929 0006D3 (v01 LENOVO TP-7U    00003160 INTL 20050513)
[    0.000000] ACPI: TCPA 0x00000000BD907000 000032 (v00                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x00000000BD8D4000 000655 (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 0x00000000BD8D3000 000274 (v01 PmRef  Cpu0Tst  00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 0x00000000BD8D2000 000242 (v01 PmRef  ApTst    00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23bffa000-0x23bffcfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023bffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bd6a0fff]
[    0.000000]   node   0: [mem 0x00000000bd6a7000-0x00000000bd7b6fff]
[    0.000000]   node   0: [mem 0x00000000bd80f000-0x00000000bd8c6fff]
[    0.000000]   node   0: [mem 0x00000000bdbff000-0x00000000bdbfffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023bffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023bffffff]
[    0.000000] On node 0 totalpages: 2070535
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12066 pages used for memmap
[    0.000000]   DMA32 zone: 772202 pages, LIFO batch:31
[    0.000000]   Normal zone: 20224 pages used for memmap
[    0.000000]   Normal zone: 1294336 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd6a1000-0xbd6a6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd7b7000-0xbd80efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd8c7000-0xbd8d1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd8d2000-0xbd8d4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd8d5000-0xbd8d8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd8d9000-0xbd8dcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd8dd000-0xbd8dffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd8e0000-0xbd906fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd907000-0xbd907fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd908000-0xbdb0efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdb0f000-0xbdb9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdb9f000-0xbdbfefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdc00000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s147456 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2038160
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptroot cryptdevice=/dev/disk/by-uuid/8c2a89af-72a1-40cc-982c-bdb60daaf11a:cryptroot zfs=rpool/ROOT/rootfs zswap.enabled=1 zswap.compressor=lz4 boot=zfs root=ZFS=rpool/ROOT/rootfs rw acpi_osi=Linux verbose cpufreq_driver=phc-intel zfs.zfs_arc_max=536870912 intel_iommu=igfx_off
[    0.000000] DMAR: Disable GFX device mapping
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8048620K/8282140K available (10252K kernel code, 1250K rwdata, 3224K rodata, 1432K init, 632K bss, 233520K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31427 entries in 123 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 2526.910 MHz processor
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.82 BogoMIPS (lpj=2526910)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.007029] Security Framework initialized
[    0.007030] Yama: becoming mindful.
[    0.010742] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012857] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012960] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013034] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013337] Disabled fast string operations
[    0.013349] CPU: Physical Processor ID: 0
[    0.013349] CPU: Processor Core ID: 0
[    0.013351] mce: CPU supports 6 MCE banks
[    0.013357] CPU0: Thermal monitoring enabled (TM2)
[    0.013361] process: using mwait in idle threads
[    0.013365] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.013366] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.013368] Spectre V2 : Mitigation: Full generic retpoline
[    0.013493] Freeing SMP alternatives memory: 24K
[    0.015000] APIC calibration not consistent with PM-Timer: 131ms instead of 100ms
[    0.015000] APIC delta adjusted to PM-Timer: 1662496 (2194475)
[    0.015000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.018010] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.018020] ... version:                2
[    0.018020] ... bit width:              40
[    0.018021] ... generic registers:      2
[    0.018022] ... value mask:             000000ffffffffff
[    0.018023] ... max period:             000000007fffffff
[    0.018023] ... fixed-purpose events:   3
[    0.018024] ... event mask:             0000000700000003
[    0.020004] Hierarchical SRCU implementation.
[    0.026157] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.028004] smp: Bringing up secondary CPUs ...
[    0.037017] x86: Booting SMP configuration:
[    0.037018] .... node  #0, CPUs:      #1
[    0.001000] Disabled fast string operations
[    0.038057] smp: Brought up 1 node, 2 CPUs
[    0.038057] smpboot: Max logical packages: 2
[    0.038057] smpboot: Total of 2 processors activated (10107.64 BogoMIPS)
[    0.039430] devtmpfs: initialized
[    0.039430] x86/mm: Memory block size: 128MB
[    0.040420] PM: Registering ACPI NVS region [mem 0xbd8c7000-0xbd8d1fff] (45056 bytes)
[    0.040422] PM: Registering ACPI NVS region [mem 0xbd8d9000-0xbd8dcfff] (16384 bytes)
[    0.040423] PM: Registering ACPI NVS region [mem 0xbd8e0000-0xbd906fff] (159744 bytes)
[    0.040425] PM: Registering ACPI NVS region [mem 0xbdb0f000-0xbdb9efff] (589824 bytes)
[    0.041015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.041015] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.041075] pinctrl core: initialized pinctrl subsystem
[    0.041196] RTC time:  6:38:28, date: 05/05/18
[    0.041321] NET: Registered protocol family 16
[    0.042007] cpuidle: using governor ladder
[    0.043006] cpuidle: using governor menu
[    0.043055] Simple Boot Flag at 0x35 set to 0x1
[    0.043070] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.043072] ACPI: bus type PCI registered
[    0.043073] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.043144] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.043147] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.043157] PCI: Using configuration type 1 for base access
[    0.045030] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.045138] ACPI: Added _OSI(Module Device)
[    0.045139] ACPI: Added _OSI(Processor Device)
[    0.045140] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.045141] ACPI: Added _OSI(Processor Aggregator Device)
[    0.045142] ACPI: Added _OSI(Linux)
[    0.045145] ACPI: EC: EC started
[    0.045146] ACPI: EC: interrupt blocked
[    0.046723] ACPI: \: Used as first EC
[    0.046724] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.046726] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.053411] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query honored via cmdline
[    0.067691] ACPI: Dynamic OEM Table Load:
[    0.067699] ACPI: SSDT 0xFFFF93CF71C5E400 0002C8 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.068182] ACPI: Dynamic OEM Table Load:
[    0.068189] ACPI: SSDT 0xFFFF93CF723D3000 00087A (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.068947] ACPI: Dynamic OEM Table Load:
[    0.068953] ACPI: SSDT 0xFFFF93CF71C61800 0001CF (v01 PmRef  ApIst    00003000 INTL 20050624)
[    0.069272] ACPI: Dynamic OEM Table Load:
[    0.069277] ACPI: SSDT 0xFFFF93CF723BE600 00008D (v01 PmRef  ApCst    00003000 INTL 20050624)
[    0.071240] ACPI: Interpreter enabled
[    0.071262] ACPI: (supports S0 S3 S4 S5)
[    0.071263] ACPI: Using IOAPIC for interrupt routing
[    0.071290] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.072261] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.085514] ACPI: Power Resource [PUBS] (on)
[    0.087561] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.089455] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.097841] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[    0.098455] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.098611] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.098765] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.098919] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.099079] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.099233] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.099388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.099542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.099672] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.099677] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.100474] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.100476] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.100491] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.100783] PCI host bridge to bus 0000:00
[    0.100786] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.100788] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.100789] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.100791] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.100793] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.100794] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.100796] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.100805] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.100830] DMAR: Forcing write-buffer flush capability
[    0.100831] DMAR: Disabling IOMMU for graphics on this chipset
[    0.100931] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.100943] pci 0000:00:02.0: reg 0x10: [mem 0xf4400000-0xf47fffff 64bit]
[    0.100950] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.100954] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
[    0.101071] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.101082] pci 0000:00:02.1: reg 0x10: [mem 0xf4200000-0xf42fffff 64bit]
[    0.101201] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
[    0.101217] pci 0000:00:03.0: reg 0x10: [mem 0xfc326000-0xfc32600f 64bit]
[    0.101266] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.101403] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[    0.101429] pci 0000:00:19.0: reg 0x10: [mem 0xfc100000-0xfc11ffff]
[    0.101439] pci 0000:00:19.0: reg 0x14: [mem 0xfc125000-0xfc125fff]
[    0.101450] pci 0000:00:19.0: reg 0x18: [io  0x1840-0x185f]
[    0.101533] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.101637] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.101695] pci 0000:00:1a.0: reg 0x20: [io  0x1860-0x187f]
[    0.101842] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.101901] pci 0000:00:1a.1: reg 0x20: [io  0x1880-0x189f]
[    0.102046] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.102104] pci 0000:00:1a.2: reg 0x20: [io  0x18a0-0x18bf]
[    0.102265] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.102291] pci 0000:00:1a.7: reg 0x10: [mem 0xfc326400-0xfc3267ff]
[    0.102390] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.102503] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.102532] pci 0000:00:1b.0: reg 0x10: [mem 0xfc120000-0xfc123fff 64bit]
[    0.102636] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.102751] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.102862] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.102979] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.103092] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.103210] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.103320] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.103435] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.103544] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.103663] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.103721] pci 0000:00:1d.0: reg 0x20: [io  0x18c0-0x18df]
[    0.103869] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.103927] pci 0000:00:1d.1: reg 0x20: [io  0x18e0-0x18ff]
[    0.104075] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.104133] pci 0000:00:1d.2: reg 0x20: [io  0x1c00-0x1c1f]
[    0.104282] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.104308] pci 0000:00:1d.7: reg 0x10: [mem 0xfc326800-0xfc326bff]
[    0.104408] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.104515] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.104691] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[    0.104926] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018a
[    0.104950] pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
[    0.104960] pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
[    0.104971] pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
[    0.104981] pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
[    0.104992] pci 0000:00:1f.2: reg 0x20: [io  0x1c30-0x1c3f]
[    0.105005] pci 0000:00:1f.2: reg 0x24: [io  0x1c20-0x1c2f]
[    0.105020] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.105021] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.105023] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.105025] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.105152] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.105177] pci 0000:00:1f.3: reg 0x10: [mem 0xfc326c00-0xfc326cff 64bit]
[    0.105206] pci 0000:00:1f.3: reg 0x20: [io  0x1c60-0x1c7f]
[    0.105381] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.105474] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000
[    0.105534] pci 0000:03:00.0: reg 0x10: [mem 0xf4300000-0xf4301fff 64bit]
[    0.105743] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.109031] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.109038] pci 0000:00:1c.1:   bridge window [mem 0xf4300000-0xf43fffff]
[    0.109168] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[    0.109241] pci 0000:05:00.0: reg 0x10: [mem 0xf4800000-0xf4801fff 64bit]
[    0.109513] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.109693] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.109698] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.109702] pci 0000:00:1c.3:   bridge window [mem 0xf4800000-0xf7ffffff]
[    0.109709] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[    0.109779] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[    0.109783] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.109788] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.109794] pci 0000:00:1c.4:   bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
[    0.109868] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
[    0.109900] pci 0000:15:00.0: reg 0x10: [mem 0xfc000000-0xfc000fff]
[    0.109945] pci 0000:15:00.0: supports D1 D2
[    0.109947] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110020] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
[    0.110050] pci 0000:15:00.1: reg 0x10: [mem 0xfc001000-0xfc0017ff]
[    0.110166] pci 0000:15:00.1: supports D1 D2
[    0.110168] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110285] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[    0.110289] pci 0000:00:1e.0:   bridge window [io  0x4000-0x7fff]
[    0.110294] pci 0000:00:1e.0:   bridge window [mem 0xfa000000-0xfc0fffff]
[    0.110300] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    0.110302] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.110304] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.110306] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.110307] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.110309] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.110311] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[    0.110367] pci_bus 0000:16: busn_res: [bus 16-18] end is updated to 17
[    0.114004] ACPI: EC: interrupt unblocked
[    0.114004] ACPI: EC: event unblocked
[    0.114004] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.114004] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.114016] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.114016] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.114017] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.114018] vgaarb: loaded
[    0.114128] EDAC MC: Ver: 3.0.0
[    0.114251] PCI: Using ACPI for IRQ routing
[    0.117623] PCI: pci_cache_line_size set to 64 bytes
[    0.117711] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.117712] e820: reserve RAM buffer [mem 0xbd6a1000-0xbfffffff]
[    0.117714] e820: reserve RAM buffer [mem 0xbd7b7000-0xbfffffff]
[    0.117716] e820: reserve RAM buffer [mem 0xbd8c7000-0xbfffffff]
[    0.117718] e820: reserve RAM buffer [mem 0xbdc00000-0xbfffffff]
[    0.117831] NetLabel: Initializing
[    0.117832] NetLabel:  domain hash size = 128
[    0.117833] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.117847] NetLabel:  unlabeled traffic allowed by default
[    0.117937] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.117942] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.117947] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.119019] clocksource: Switched to clocksource hpet
[    0.134545] VFS: Disk quotas dquot_6.6.0
[    0.134570] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.134678] pnp: PnP ACPI init
[    0.155539] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.155541] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.155543] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.155545] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.155547] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.155549] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[    0.155551] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[    0.155552] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.155554] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.155556] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.155558] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.155560] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.155562] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.155564] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.155566] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.155572] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.175747] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.175750] system 00:01: [io  0x1180-0x11ff] has been reserved
[    0.175752] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.175754] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.175756] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.175758] system 00:01: [io  0x1680-0x169f] has been reserved
[    0.175760] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.175762] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.175764] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.175766] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.175768] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.175770] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.175775] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.175857] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.175889] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.175916] pnp 00:04: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[    0.196091] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.196659] pnp: PnP ACPI: found 6 devices
[    0.203527] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.203546] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.203549] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.203551] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.203562] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.203564] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.203607] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.203612] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.203617] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.203620] pci 0000:00:1c.0: BAR 13: assigned [io  0x8000-0x8fff]
[    0.203622] pci 0000:00:1c.1: BAR 13: assigned [io  0x9000-0x9fff]
[    0.203626] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.203629] pci 0000:00:1c.0:   bridge window [io  0x8000-0x8fff]
[    0.203634] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.203639] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.203645] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.203648] pci 0000:00:1c.1:   bridge window [io  0x9000-0x9fff]
[    0.203654] pci 0000:00:1c.1:   bridge window [mem 0xf4300000-0xf43fffff]
[    0.203658] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.203665] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.203668] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.203673] pci 0000:00:1c.3:   bridge window [mem 0xf4800000-0xf7ffffff]
[    0.203677] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[    0.203684] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[    0.203687] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.203692] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.203696] pci 0000:00:1c.4:   bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
[    0.203705] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
[    0.203709] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[    0.203710] pci 0000:15:00.0: BAR 13: assigned [io  0x4000-0x40ff]
[    0.203712] pci 0000:15:00.0: BAR 14: assigned [io  0x4400-0x44ff]
[    0.203714] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[    0.203716] pci 0000:15:00.0:   bridge window [io  0x4000-0x40ff]
[    0.203721] pci 0000:15:00.0:   bridge window [io  0x4400-0x44ff]
[    0.203726] pci 0000:15:00.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
[    0.203731] pci 0000:15:00.0:   bridge window [mem 0xc4000000-0xc7ffffff]
[    0.203736] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[    0.203739] pci 0000:00:1e.0:   bridge window [io  0x4000-0x7fff]
[    0.203744] pci 0000:00:1e.0:   bridge window [mem 0xfa000000-0xfc0fffff]
[    0.203748] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    0.203756] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.203758] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.203759] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.203761] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.203762] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.203764] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
[    0.203766] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.203768] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.203769] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.203771] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.203773] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff]
[    0.203774] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.203776] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.203777] pci_bus 0000:05: resource 1 [mem 0xf4800000-0xf7ffffff]
[    0.203779] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref]
[    0.203781] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.203782] pci_bus 0000:0d: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.203784] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref]
[    0.203786] pci_bus 0000:15: resource 0 [io  0x4000-0x7fff]
[    0.203787] pci_bus 0000:15: resource 1 [mem 0xfa000000-0xfc0fffff]
[    0.203789] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[    0.203790] pci_bus 0000:15: resource 4 [io  0x0000-0x0cf7 window]
[    0.203792] pci_bus 0000:15: resource 5 [io  0x0d00-0xffff window]
[    0.203794] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.203795] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.203797] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.203798] pci_bus 0000:15: resource 9 [mem 0xc0000000-0xfebfffff window]
[    0.203800] pci_bus 0000:16: resource 0 [io  0x4000-0x40ff]
[    0.203802] pci_bus 0000:16: resource 1 [io  0x4400-0x44ff]
[    0.203803] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[    0.203805] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[    0.203945] NET: Registered protocol family 2
[    0.204200] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.204438] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.204784] TCP: Hash tables configured (established 65536 bind 65536)
[    0.204856] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.204906] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.205025] NET: Registered protocol family 1
[    0.205045] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.206998] PCI: CLS 64 bytes, default 64
[    0.207064] Unpacking initramfs...
[    0.434526] Freeing initrd memory: 12804K
[    0.434533] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.434537] software IO TLB [mem 0xb96a1000-0xbd6a1000] (64MB) mapped at [00000000d2ea26b4-00000000227de737]
[    0.434750] Scanning for low memory corruption every 60 seconds
[    0.435451] Initialise system trusted keyrings
[    0.435463] Key type blacklist registered
[    0.435546] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[    0.437087] zbud: loaded
[    0.439230] Key type asymmetric registered
[    0.439232] Asymmetric key parser 'x509' registered
[    0.439271] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.439313] io scheduler noop registered
[    0.439314] io scheduler deadline registered
[    0.439369] io scheduler cfq registered (default)
[    0.439370] io scheduler mq-deadline registered
[    0.439371] io scheduler kyber registered
[    0.439400] io scheduler bfq registered
[    0.440447] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    0.440474] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    0.440501] pcieport 0000:00:1c.3: Signaling PME with IRQ 26
[    0.440527] pcieport 0000:00:1c.4: Signaling PME with IRQ 27
[    0.440555] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    0.440594] pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    0.440624] pciehp 0000:00:1c.3:pcie004: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    0.440654] pciehp 0000:00:1c.4:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    0.440737] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[    0.440738] vesafb: scrolling: redraw
[    0.440739] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.440756] vesafb: framebuffer at 0xd0000000, mapped to 0x00000000b2ebc9da, using 4032k, total 4032k
[    0.472164] Console: switching to colour frame buffer device 160x50
[    0.503793] fb0: VESA VGA frame buffer device
[    0.503816] intel_idle: does not run on family 6 model 23
[    0.503874] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.503907] ACPI: Lid Switch [LID]
[    0.503950] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.503973] ACPI: Sleep Button [SLPB]
[    0.504058] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.504080] ACPI: Power Button [PWRF]
[    0.504794] Monitor-Mwait will be used to enter C-1 state
[    0.504810] Monitor-Mwait will be used to enter C-2 state
[    0.504824] Monitor-Mwait will be used to enter C-3 state
[    0.504832] tsc: Marking TSC unstable due to TSC halts in idle
[    0.507716] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.508205] thermal LNXTHERM:00: registered as thermal_zone0
[    0.508207] ACPI: Thermal Zone [THM0] (39 C)
[    0.509970] thermal LNXTHERM:01: registered as thermal_zone1
[    0.509972] ACPI: Thermal Zone [THM1] (42 C)
[    0.510215] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.511359] ledtrig-cpu: registered to indicate activity on CPUs
[    0.511627] NET: Registered protocol family 10
[    0.516405] Segment Routing with IPv6
[    0.516429] NET: Registered protocol family 17
[    0.516670] RAS: Correctable Errors collector initialized.
[    0.516712] microcode: sig=0x1067a, pf=0x80, revision=0xa07
[    0.516776] microcode: Microcode Update Driver: v2.2.
[    0.516966] registered taskstats version 1
[    0.516975] Loading compiled-in X.509 certificates
[    0.519533] zswap: loaded using pool lz4/zbud
[    0.523570] Key type big_key registered
[    0.523958]   Magic number: 2:583:619
[    0.524086] hctosys: unable to open rtc device (rtc0)
[    0.526822] Freeing unused kernel memory: 1432K
[    0.526823] Write protecting the kernel read-only data: 16384k
[    0.527878] Freeing unused kernel memory: 2016K
[    0.530344] Freeing unused kernel memory: 872K
[    0.554809] device-mapper: uevent: version 1.0.3
[    0.554895] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.555170] spl: loading out-of-tree module taints kernel.
[    0.558887] SPL: Loaded module v0.7.8-1
[    0.559088] znvpair: module license 'CDDL' taints kernel.
[    0.559089] Disabling lock debugging due to kernel taint
[    1.439061] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246c867e24d, max_idle_ns: 440795229007 ns
[    2.220048] ZFS: Loaded module v0.7.8-1, ZFS pool version 5000, ZFS filesystem version 5
[    2.320585] ACPI: bus type USB registered
[    2.320614] usbcore: registered new interface driver usbfs
[    2.320626] usbcore: registered new interface driver hub
[    2.320657] usbcore: registered new device driver usb
[    2.322070] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.322615] ehci-pci: EHCI PCI platform driver
[    2.322815] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    2.322824] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.322840] ehci-pci 0000:00:1a.7: debug port 1
[    2.326766] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    2.326790] ehci-pci 0000:00:1a.7: irq 23, io mem 0xfc326400
[    2.329454] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    2.334128] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.334195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.334196] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.334198] usb usb1: Product: EHCI Host Controller
[    2.334200] usb usb1: Manufacturer: Linux 4.15.15-1-ARCH ehci_hcd
[    2.334201] usb usb1: SerialNumber: 0000:00:1a.7
[    2.334348] hub 1-0:1.0: USB hub found
[    2.334357] hub 1-0:1.0: 6 ports detected
[    2.334815] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.334821] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.334834] ehci-pci 0000:00:1d.7: debug port 1
[    2.338757] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.338777] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfc326800
[    2.341050] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.341266] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.345608] xhci_hcd 0000:05:00.0: Resetting
[    2.347021] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 1907 msec ago)
[    2.348046] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.348107] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.348109] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.348110] usb usb2: Product: EHCI Host Controller
[    2.348112] usb usb2: Manufacturer: Linux 4.15.15-1-ARCH ehci_hcd
[    2.348113] usb usb2: SerialNumber: 0000:00:1d.7
[    2.348264] hub 2-0:1.0: USB hub found
[    2.348273] hub 2-0:1.0: 6 ports detected
[    2.352350] uhci_hcd: USB Universal Host Controller Interface driver
[    2.352477] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.352484] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.352493] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.352701] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[    2.352767] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.352769] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.352771] usb usb3: Product: UHCI Host Controller
[    2.352772] usb usb3: Manufacturer: Linux 4.15.15-1-ARCH uhci_hcd
[    2.352774] usb usb3: SerialNumber: 0000:00:1a.0
[    2.352910] hub 3-0:1.0: USB hub found
[    2.352918] hub 3-0:1.0: 2 ports detected
[    2.353345] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.353351] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.353358] uhci_hcd 0000:00:1a.1: detected 2 ports
[    2.353396] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[    2.353547] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.353549] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.353550] usb usb4: Product: UHCI Host Controller
[    2.353552] usb usb4: Manufacturer: Linux 4.15.15-1-ARCH uhci_hcd
[    2.353553] usb usb4: SerialNumber: 0000:00:1a.1
[    2.353671] hub 4-0:1.0: USB hub found
[    2.353679] hub 4-0:1.0: 2 ports detected
[    2.354047] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    2.354051] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    2.354059] uhci_hcd 0000:00:1a.2: detected 2 ports
[    2.354085] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[    2.354140] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.354142] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.354144] usb usb5: Product: UHCI Host Controller
[    2.354145] usb usb5: Manufacturer: Linux 4.15.15-1-ARCH uhci_hcd
[    2.354147] usb usb5: SerialNumber: 0000:00:1a.2
[    2.354264] hub 5-0:1.0: USB hub found
[    2.354272] hub 5-0:1.0: 2 ports detected
[    2.354526] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.354531] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    2.354537] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.354567] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[    2.354627] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.354629] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.354630] usb usb6: Product: UHCI Host Controller
[    2.354632] usb usb6: Manufacturer: Linux 4.15.15-1-ARCH uhci_hcd
[    2.354633] usb usb6: SerialNumber: 0000:00:1d.0
[    2.354749] hub 6-0:1.0: USB hub found
[    2.354756] hub 6-0:1.0: 2 ports detected
[    2.355099] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.355104] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    2.355112] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.355140] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[    2.355193] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.355195] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.355196] usb usb7: Product: UHCI Host Controller
[    2.355198] usb usb7: Manufacturer: Linux 4.15.15-1-ARCH uhci_hcd
[    2.355199] usb usb7: SerialNumber: 0000:00:1d.1
[    2.355316] hub 7-0:1.0: USB hub found
[    2.355324] hub 7-0:1.0: 2 ports detected
[    2.355580] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.355585] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    2.355591] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.355624] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[    2.355690] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    2.355691] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.355693] usb usb8: Product: UHCI Host Controller
[    2.355694] usb usb8: Manufacturer: Linux 4.15.15-1-ARCH uhci_hcd
[    2.355696] usb usb8: SerialNumber: 0000:00:1d.2
[    2.355926] SCSI subsystem initialized
[    2.356061] hub 8-0:1.0: USB hub found
[    2.356069] hub 8-0:1.0: 2 ports detected
[    2.363217] libata version 3.00 loaded.
[    2.367345] ata_piix 0000:00:1f.2: version 2.13
[    2.372957] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    2.382624] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.384455] scsi host0: ata_piix
[    2.387382] scsi host1: ata_piix
[    2.387471] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c30 irq 14
[    2.387476] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1c38 irq 15
[    2.405134] firewire_ohci 0000:15:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.705472] ata2: SATA link down (SStatus 0 SControl 300)
[    2.863182] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.865759] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
[    2.865762] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.868784] ata1.00: configured for UDMA/133
[    2.869058] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  7B0Q PQ: 0 ANSI: 5
[    2.872445] ata1.00: Enabling discard_zeroes_data
[    2.872528] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.872544] sd 0:0:0:0: [sda] Write Protect is off
[    2.872546] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.872571] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.872706] ata1.00: Enabling discard_zeroes_data
[    2.875275]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    2.875987] ata1.00: Enabling discard_zeroes_data
[    2.876173] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.911356] firewire_core 0000:15:00.1: created device fw0: GUID 00016c2000ba3695, S400
[    3.359108] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 1012 msec ago)
[    4.385101] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 2038 msec ago)
[    4.385380] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    4.385390] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[    4.390769] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    4.391107] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[    4.391109] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.391111] usb usb9: Product: xHCI Host Controller
[    4.391113] usb usb9: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[    4.391114] usb usb9: SerialNumber: 0000:05:00.0
[    4.391308] hub 9-0:1.0: USB hub found
[    4.391323] hub 9-0:1.0: 2 ports detected
[    4.391471] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    4.391475] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[    4.394224] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.394247] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[    4.394249] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.394250] usb usb10: Product: xHCI Host Controller
[    4.394251] usb usb10: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[    4.394253] usb usb10: SerialNumber: 0000:05:00.0
[    4.394404] hub 10-0:1.0: USB hub found
[    4.394419] hub 10-0:1.0: 2 ports detected
[    5.457647] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd
[    5.474080] usb 10-1: New USB device found, idVendor=0781, idProduct=5583
[    5.474082] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.474083] usb 10-1: Product: Ultra Fit
[    5.474085] usb 10-1: Manufacturer: SanDisk
[    5.474086] usb 10-1: SerialNumber: xxxxxxxxxxx
[    5.478196] usb-storage 10-1:1.0: USB Mass Storage device detected
[    5.479394] scsi host2: usb-storage 10-1:1.0
[    5.479503] usbcore: registered new interface driver usb-storage
[    5.480337] usbcore: registered new interface driver uas
[    6.496774] scsi 2:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[    6.498058] sd 2:0:0:0: [sdb] 242614272 512-byte logical blocks: (124 GB/116 GiB)
[    6.500152] sd 2:0:0:0: [sdb] Write Protect is off
[    6.500156] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    6.501066] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    6.527076]  sdb: sdb1 sdb2 sdb3 sdb4
[    6.529607] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    9.198892] random: crng init done
[   13.094472] NET: Registered protocol family 38
[   14.673223] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.687067] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[   14.699276] systemd[1]: Detected architecture x86-64.
[   14.704324] systemd[1]: Set hostname to <chris-3-x200>.
[   14.964512] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.965142] systemd[1]: Listening on LVM2 metadata daemon socket.
[   14.968411] systemd[1]: Listening on Process Core Dump Socket.
[   14.968800] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   14.969233] systemd[1]: Listening on LVM2 poll daemon socket.
[   14.970625] systemd[1]: Created slice User and Session Slice.
[   14.971486] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[   15.076036] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   15.077851] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   15.087452] thinkpad_ec: thinkpad_ec 0.43 loaded.
[   15.116085] tp_smapi 0.43 loading...
[   15.117065] tp_smapi successfully loaded (smapi_port=0xb2).
[   15.166109] vboxdrv: Found 2 processor cores
[   15.167292] RPC: Registered named UNIX socket transport module.
[   15.167293] RPC: Registered udp transport module.
[   15.167293] RPC: Registered tcp transport module.
[   15.167294] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.178096] vboxdrv: fAsync=0 offMin=0x214 offMax=0x964
[   15.278237] vboxdrv: TSC mode is Synchronous, tentative frequency 2527007630 Hz
[   15.278238] vboxdrv: Successfully loaded version 5.2.10 (interface 0x00290001)
[   15.280107] VBoxPciLinuxInit
[   15.280113] vboxpci: IOMMU not found (not registered)
[   15.281125] VBoxNetAdp: Successfully started.
[   15.282709] VBoxNetFlt: Successfully started.
[   15.319323] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   15.568510] systemd-journald[858]: Received request to flush runtime journal from PID 1
[   16.295354] rtc_cmos 00:02: RTC can wake from S4
[   16.295757] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[   16.295795] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   16.308100] ACPI: AC Adapter [AC] (on-line)
[   16.322216] ACPI: Battery Slot [BAT0] (battery present)
[   16.378255] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.393789] tpm_tis 00:05: 1.2 TPM (device-id 0x1020, rev-id 6)
[   16.415841] pps_core: LinuxPPS API ver. 1 registered
[   16.415843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   16.418221] Linux agpgart interface v0.103
[   16.427347] PTP clock support registered
[   16.434059] Non-volatile memory driver v1.3
[   16.536331] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   16.536333] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   16.537437] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   16.562746] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   16.562748] thinkpad_acpi: http://ibm-acpi.sf.net/
[   16.562749] thinkpad_acpi: ThinkPad BIOS 7UET86WW (3.16 ), EC 7VHT16WW-1.06
[   16.562750] thinkpad_acpi: Lenovo ThinkPad R400, model 7440DQ6
[   16.672054] thinkpad_acpi: radio switch found; radios are enabled
[   16.672244] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   16.672245] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   16.686073] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[   16.692646] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   16.695842] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[   16.774772] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:68:20:39:08
[   16.774782] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[   16.774806] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[   16.787995] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   16.798677] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[   16.799295] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[   16.799297] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.799300] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[   16.799301] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   16.799303] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x1c/0x0
[   16.799304] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   16.799306] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x18
[   16.799308] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1d
[   16.799310] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x17
[   16.800403] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   16.816960] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.817568] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.817635] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.817697] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.817756] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.823383] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   16.824601] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   16.824605] cfg80211: failed to load regulatory.db
[   16.935301] Intel(R) Wireless WiFi driver for Linux
[   16.935303] Copyright(c) 2003- 2015 Intel Corporation
[   16.935508] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   16.946202] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[   17.002939] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[   17.066659] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   17.066661] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   17.066663] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   17.066665] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[   17.125889] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   17.143812] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[   17.143816] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[   17.143823] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io  0x4000-0x7fff]
[   17.143826] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xfa000000-0xfc0fffff]
[   17.143829] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfa000000-0xfc0fffff:
[   17.143837]  excluding 0xfbef0000-0xfc0fffff
[   17.143841] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref]
[   17.143843] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff:
[   17.143846]  excluding 0xf0000000-0xf3ffffff
[   17.209038] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[   17.311973] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20170831/utaddress-247)
[   17.311981] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.311985] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
[   17.311988] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.311990] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20170831/utaddress-247)
[   17.311993] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.311994] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   17.384057] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
[   17.384061] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   17.384063] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[   17.384065] usb 4-2: Manufacturer: Lenovo Computer Corp
[   17.566961] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   17.567842] input: PC Speaker as /devices/platform/pcspkr/input/input11
[   17.698016] pci 0000:00:00.0: Intel GM45 Chipset
[   17.698060] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   17.698748] pci 0000:00:00.0: detected 32768K stolen memory
[   17.698782] [drm] Memory usable by graphics device = 2048M
[   17.698788] checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
[   17.698789] fb: switching to inteldrmfb from VESA VGA
[   17.698827] Console: switching to colour dummy device 80x25
[   17.698979] [drm] Replacing VGA console driver
[   17.707049] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   17.707051] [drm] Driver supports precise vblank timestamp query.
[   17.712496] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   17.891057] [drm] RC6 disabled, disabling runtime PM support
[   17.894289] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   17.912172] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   17.918834] acpi device:01: registered as cooling_device2
[   17.918938] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[   18.103223] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.326137] intel_powerclamp: No package C-state available
[   18.335884] intel_powerclamp: No package C-state available
[   18.343018] psmouse serio1: synaptics: queried max coordinates: x [..5598], y [..4670]
[   18.374188] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000/0x0, board id: 0, fw id: 434116
[   18.374194] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[   18.415075] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[   18.483925] Adding 4194300k swap on /dev/zd0.  Priority:-2 extents:1 across:4194300k SSDscFS
[   18.719280] fbcon: inteldrmfb (fb0) is primary device
[   18.959088] usb 4-2: USB disconnect, device number 2
[   19.104952] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   19.106853] iTCO_vendor_support: vendor-support=0
[   19.110998] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   19.113465] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   19.114083] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[   19.114173] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   19.244225] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   19.244231]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[   19.244255] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   19.244261]  excluding 0xa0000000-0xa0ffffff
[   19.244278] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   19.244284]  excluding 0x60000000-0x60ffffff
[   19.297499] Console: switching to colour frame buffer device 160x50
[   19.316971] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   19.338764] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[   19.524135] mousedev: PS/2 mouse device common for all mice
[   19.998376] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[   20.725319] Adding 8446972k swap on /dev/mapper/cryptswap.  Priority:-3 extents:1 across:8446972k SSFS
[   26.427417] Bluetooth: Core ver 2.22
[   26.427451] NET: Registered protocol family 31
[   26.427452] Bluetooth: HCI device and connection manager initialized
[   26.427457] Bluetooth: HCI socket layer initialized
[   26.427460] Bluetooth: L2CAP socket layer initialized
[   26.427469] Bluetooth: SCO socket layer initialized
[   26.445840] usbcore: registered new interface driver btusb
[   35.219028] smapi smapi: set_real_thresh: set start to 40 for bat=0
[   35.430032] smapi smapi: set_real_thresh: set stop to 74 for bat=0
[   36.478525] NFSD: starting 90-second grace period (net f0000099)
[   36.497765] NET: Registered protocol family 3
[   36.658601] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   36.788599] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   36.812754] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   46.042133] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   46.157760] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   46.183232] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   46.281609] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   46.395598] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   46.425142] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   50.586712] fuse init (API version 7.26)
[   55.843861] wlp3s0: authenticate with a0:f3:c1:77:fa:81
[   55.851140] wlp3s0: send auth to a0:f3:c1:77:fa:81 (try 1/3)
[   55.854061] wlp3s0: authenticated
[   55.855187] wlp3s0: associate with a0:f3:c1:77:fa:81 (try 1/3)
[   55.861217] wlp3s0: RX AssocResp from a0:f3:c1:77:fa:81 (capab=0x431 status=0 aid=2)
[   55.867141] wlp3s0: associated
[   56.079533] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   73.375050] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   73.375052] Bluetooth: BNEP filters: protocol multicast
[   73.375060] Bluetooth: BNEP socket layer initialized
[   76.933028] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[   77.105126] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
[   77.105129] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   77.105131] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[   77.105133] usb 4-2: Manufacturer: Lenovo Computer Corp
[   77.249043] Bluetooth: RFCOMM TTY layer initialized
[   77.249051] Bluetooth: RFCOMM socket layer initialized
[   77.249058] Bluetooth: RFCOMM ver 1.11
[   78.533254] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[   93.565355] pciehp 0000:00:1c.3:pcie004: Slot(3): Link Down
[   93.565402] xhci_hcd 0000:05:00.0: remove, state 1
[   93.565415] usb usb10: USB disconnect, device number 1
[   93.565417] usb 10-1: USB disconnect, device number 2
[   93.576623] xhci_hcd 0000:05:00.0: USB bus 10 deregistered
[   93.576633] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[   93.576638] xhci_hcd 0000:05:00.0: remove, state 1
[   93.576644] usb usb9: USB disconnect, device number 1
[   93.576882] xhci_hcd 0000:05:00.0: Host halt failed, -19
[   93.576885] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[   93.577031] xhci_hcd 0000:05:00.0: USB bus 9 deregistered
[  111.908198] pciehp 0000:00:1c.3:pcie004: Slot(3): Card present
[  111.913665] pciehp 0000:00:1c.3:pcie004: Slot(3): Link Up
[  112.023068] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  112.023118] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  112.023319] pci 0000:05:00.0: PME# supported from D0 D3hot
[  112.026070] pci 0000:05:00.0: BAR 0: assigned [mem 0xf4800000-0xf4801fff 64bit]
[  112.026092] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[  112.026095] pcieport 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[  112.026101] pcieport 0000:00:1c.3:   bridge window [mem 0xf4800000-0xf7ffffff]
[  112.026105] pcieport 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[  112.026125] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  118.641642] pci 0000:05:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[  118.641805] xhci_hcd 0000:05:00.0: Resetting
[  118.643161] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 114258 msec ago)
[  119.647055] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 1004 msec ago)
[  120.673028] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 2030 msec ago)
[  120.673345] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  120.673359] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[  153.992800] xhci_hcd 0000:05:00.0: can't setup: -110
[  153.992811] xhci_hcd 0000:05:00.0: USB bus 9 deregistered
[  153.992915] xhci_hcd 0000:05:00.0: init 0000:05:00.0 fail, -110
[  153.992925] xhci_hcd: probe of 0000:05:00.0 failed with error -110
[  157.898213] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[  207.616081] perf: interrupt took too long (3136 > 3131), lowering kernel.perf_event_max_sample_rate to 63000
[  443.693691] perf: interrupt took too long (3928 > 3920), lowering kernel.perf_event_max_sample_rate to 50000
[  553.522718] PM: suspend entry (deep)
[  553.522721] PM: Syncing filesystems ... done.
[  553.594938] Freezing user space processes ... (elapsed 0.224 seconds) done.
[  553.819920] OOM killer disabled.
[  553.819923] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[  553.822486] Suspending console(s) (use no_console_suspend to debug)
[  553.978631] wlp3s0: deauthenticating from a0:f3:c1:77:fa:81 by local choice (Reason: 3=DEAUTH_LEAVING)
[  553.986255] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  553.987302] sd 0:0:0:0: [sda] Stopping disk
[  554.053494] pciehp 0000:00:1c.1:pcie004: Slot(1-1): Card present
[  554.054741] e1000e: EEE TX LPI TIMER: 00000000
[  554.757206] ACPI: Preparing to enter system sleep state S3
[  554.846136] ACPI: EC: event blocked
[  554.846138] ACPI: EC: EC stopped
[  554.846140] PM: Saving platform NVS memory
[  554.848162] Disabling non-boot CPUs ...
[  554.869035] smpboot: CPU 1 is now offline
[  554.872014] ACPI: Low-level resume complete
[  554.872014] ACPI: EC: EC started
[  554.872014] PM: Restoring platform NVS memory
[  554.872014] Enabling non-boot CPUs ...
[  554.872014] x86: Booting SMP configuration:
[  554.872014] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  554.868012] Disabled fast string operations
[  554.948468]  cache: parent cpu1 should not be sleeping
[  555.007938] CPU1 is up
[  555.010322] ACPI: Waking up from system sleep state S3
[  555.245952] usb usb4: root hub lost power or was reset
[  555.245983] usb usb3: root hub lost power or was reset
[  555.246051] usb usb5: root hub lost power or was reset
[  555.246170] usb usb7: root hub lost power or was reset
[  555.246208] usb usb6: root hub lost power or was reset
[  555.246226] usb usb8: root hub lost power or was reset
[  555.246293] ACPI: button: The lid device is not compliant to SW_LID.
[  555.246307] ACPI: EC: event unblocked
[  555.248015] pciehp 0000:00:1c.1:pcie004: Timeout on hotplug command 0x1038 (issued 554808 msec ago)
[  555.248022] pciehp 0000:00:1c.4:pcie004: Timeout on hotplug command 0x1038 (issued 554808 msec ago)
[  555.248026] pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 554808 msec ago)
[  555.248040] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 434575 msec ago)
[  555.256227] sd 0:0:0:0: [sda] Starting disk
[  555.360298] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  555.476955] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  555.568307] ata2: SATA link down (SStatus 0 SControl 300)
[  555.569073] usb 4-2: reset full-speed USB device number 3 using uhci_hcd
[  555.727084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  555.729586] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[  555.729590] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[  555.729593] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[  555.729596] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[  555.729599] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[  555.789308] ata1.00: configured for UDMA/133
[  555.803260] ata1.00: Enabling discard_zeroes_data
[  555.807068] firewire_core 0000:15:00.1: rediscovered device fw0
[  557.111057] psmouse serio1: synaptics: queried max coordinates: x [..5598], y [..4670]
[  557.185100] usb 4-2:1.0: rebind failed: -517
[  557.185110] usb 4-2:1.1: rebind failed: -517
[  557.185547] OOM killer enabled.
[  557.185548] Restarting tasks ... done.
[  557.222022] video LNXVIDEO:00: Restoring backlight state
[  557.222890] PM: suspend exit
[  557.664396] Process accounting resumed
[  558.547643] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  558.664760] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  558.693916] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  561.776639] pciehp 0000:00:1c.3:pcie004: Slot(3): Card present
[  561.780966] pciehp 0000:00:1c.3:pcie004: Slot(3): Link Up
[  561.895093] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  561.895143] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  561.895326] pci 0000:05:00.0: PME# supported from D0 D3hot
[  561.899440] pci 0000:05:00.0: BAR 0: assigned [mem 0xf4800000-0xf4801fff 64bit]
[  561.899459] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[  561.899463] pcieport 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[  561.899469] pcieport 0000:00:1c.3:   bridge window [mem 0xf4800000-0xf7ffffff]
[  561.899473] pcieport 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[  561.899492] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  565.972351] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  566.086823] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  566.119085] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  566.193690] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  566.310785] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  566.336076] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  568.050894] pci 0000:05:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[  568.051537] xhci_hcd 0000:05:00.0: Resetting
[  568.053038] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 12805 msec ago)
[  569.055081] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 1002 msec ago)
[  570.081082] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 2028 msec ago)
[  570.081525] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  570.081552] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[  571.693314] wlp3s0: authenticate with a0:f3:c1:77:fa:81
[  571.698039] wlp3s0: send auth to a0:f3:c1:77:fa:81 (try 1/3)
[  571.711841] wlp3s0: authenticated
[  571.712025] wlp3s0: associate with a0:f3:c1:77:fa:81 (try 1/3)
[  571.716044] wlp3s0: RX AssocResp from a0:f3:c1:77:fa:81 (capab=0x431 status=0 aid=2)
[  571.725317] wlp3s0: associated
[  571.740730] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  600.810603] xhci_hcd 0000:05:00.0: can't setup: -110
[  600.810612] xhci_hcd 0000:05:00.0: USB bus 9 deregistered
[  600.810710] xhci_hcd 0000:05:00.0: init 0000:05:00.0 fail, -110
[  600.810719] xhci_hcd: probe of 0000:05:00.0 failed with error -110
[  634.388231] pciehp 0000:00:1c.3:pcie004: Slot(3): Link Down
[  650.246647] pciehp 0000:00:1c.3:pcie004: Slot(3): Card present
[  650.269208] pciehp 0000:00:1c.3:pcie004: Slot(3): Card not present
[  650.274111] pciehp 0000:00:1c.3:pcie004: Slot(3): Card present
[  650.298248] pciehp 0000:00:1c.3:pcie004: Slot(3): Card not present
[  650.307691] pciehp 0000:00:1c.3:pcie004: Slot(3): Card present
[  650.307838] pciehp 0000:00:1c.3:pcie004: Slot(3): Link Up
[  650.423160] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  650.423228] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  650.423475] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[  650.426143] pci 0000:05:00.0: BAR 0: assigned [mem 0xf4800000-0xf4801fff 64bit]
[  650.426178] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[  650.426186] pcieport 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[  650.426197] pcieport 0000:00:1c.3:   bridge window [mem 0xf4800000-0xf7ffffff]
[  650.426207] pcieport 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[  650.426241] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  650.426906] xhci_hcd 0000:05:00.0: Resetting
[  650.431086] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 80350 msec ago)
[  651.487144] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 1056 msec ago)
[  652.513103] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 2082 msec ago)
[  652.513506] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  652.513521] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[  652.518858] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[  652.519221] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[  652.519224] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  652.519227] usb usb9: Product: xHCI Host Controller
[  652.519229] usb usb9: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[  652.519232] usb usb9: SerialNumber: 0000:05:00.0
[  652.520673] hub 9-0:1.0: USB hub found
[  652.520694] hub 9-0:1.0: 2 ports detected
[  652.521280] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  652.521288] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[  652.522337] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
[  652.522362] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[  652.522364] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  652.522366] usb usb10: Product: xHCI Host Controller
[  652.522367] usb usb10: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[  652.522369] usb usb10: SerialNumber: 0000:05:00.0
[  652.526453] hub 10-0:1.0: USB hub found
[  652.526469] hub 10-0:1.0: 2 ports detected
[  652.526645] pciehp 0000:00:1c.3:pcie004: Slot(3): Link Up event ignored; already powering on
[  652.526662] xhci_hcd 0000:05:00.0: remove, state 1
[  652.526666] usb usb10: USB disconnect, device number 1
[  652.526867] xhci_hcd 0000:05:00.0: USB bus 10 deregistered
[  652.526874] xhci_hcd 0000:05:00.0: remove, state 1
[  652.526879] usb usb9: USB disconnect, device number 1
[  652.535183] xhci_hcd 0000:05:00.0: USB bus 9 deregistered
[  652.647091] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  652.647166] pci 0000:05:00.0: reg 0x10: [mem 0xf4800000-0xf4801fff 64bit]
[  652.647445] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[  652.650098] pci 0000:05:00.0: BAR 0: assigned [mem 0xf4800000-0xf4801fff 64bit]
[  652.650125] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[  652.650129] pcieport 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[  652.650139] pcieport 0000:00:1c.3:   bridge window [mem 0xf4800000-0xf7ffffff]
[  652.650145] pcieport 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[  652.650771] xhci_hcd 0000:05:00.0: Resetting
[  653.016422] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[  653.535030] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 1022 msec ago)
[  654.559138] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 1024 msec ago)
[  655.585128] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 2050 msec ago)
[  655.585766] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  655.585794] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[  655.591195] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[  655.591753] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[  655.591760] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  655.591765] usb usb9: Product: xHCI Host Controller
[  655.591770] usb usb9: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[  655.591774] usb usb9: SerialNumber: 0000:05:00.0
[  655.592252] hub 9-0:1.0: USB hub found
[  655.592282] hub 9-0:1.0: 2 ports detected
[  655.592659] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  655.592671] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[  655.594615] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
[  655.594638] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[  655.594640] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  655.594641] usb usb10: Product: xHCI Host Controller
[  655.594643] usb usb10: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[  655.594644] usb usb10: SerialNumber: 0000:05:00.0
[  655.594770] hub 10-0:1.0: USB hub found
[  655.594781] hub 10-0:1.0: 2 ports detected
[  655.594947] xhci_hcd 0000:05:00.0: remove, state 1
[  655.594951] usb usb10: USB disconnect, device number 1
[  655.595695] xhci_hcd 0000:05:00.0: USB bus 10 deregistered
[  655.595701] xhci_hcd 0000:05:00.0: remove, state 1
[  655.595705] usb usb9: USB disconnect, device number 1
[  655.605069] xhci_hcd 0000:05:00.0: USB bus 9 deregistered
[  655.711145] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  655.711217] pci 0000:05:00.0: reg 0x10: [mem 0xf4800000-0xf4801fff 64bit]
[  655.711497] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[  655.714079] pci 0000:05:00.0: BAR 0: assigned [mem 0xf4800000-0xf4801fff 64bit]
[  655.714102] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[  655.714106] pcieport 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[  655.714111] pcieport 0000:00:1c.3:   bridge window [mem 0xf4800000-0xf7ffffff]
[  655.714116] pcieport 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[  655.714491] xhci_hcd 0000:05:00.0: Resetting
[  656.607043] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 1022 msec ago)
[  657.631083] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 1024 msec ago)
[  658.657063] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x0030 (issued 2050 msec ago)
[  658.657539] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  658.657566] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[  658.662950] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[  658.663516] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[  658.663523] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  658.663529] usb usb9: Product: xHCI Host Controller
[  658.663533] usb usb9: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[  658.663538] usb usb9: SerialNumber: 0000:05:00.0
[  658.664654] hub 9-0:1.0: USB hub found
[  658.664667] hub 9-0:1.0: 2 ports detected
[  658.665028] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  658.665033] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[  658.666388] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
[  658.666412] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[  658.666414] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  658.666415] usb usb10: Product: xHCI Host Controller
[  658.666417] usb usb10: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[  658.666418] usb usb10: SerialNumber: 0000:05:00.0
[  658.666754] hub 10-0:1.0: USB hub found
[  658.666767] hub 10-0:1.0: 2 ports detected
[  658.985075] usb 9-1: new high-speed USB device number 2 using xhci_hcd
[  659.118770] usb 9-1: New USB device found, idVendor=0781, idProduct=5583
[  659.118773] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  659.118775] usb 9-1: Product: Ultra Fit
[  659.118776] usb 9-1: Manufacturer: SanDisk
[  659.118778] usb 9-1: SerialNumber: xxxxxxxxxxx
[  659.120968] usb-storage 9-1:1.0: USB Mass Storage device detected
[  659.126755] scsi host2: usb-storage 9-1:1.0
[  659.985546] usb 10-2: new SuperSpeed USB device number 2 using xhci_hcd
[  660.003275] usb 10-2: New USB device found, idVendor=0bc2, idProduct=61b7
[  660.003279] usb 10-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  660.003282] usb 10-2: Product: M3 Portable
[  660.003284] usb 10-2: Manufacturer: Seagate
[  660.003287] usb 10-2: SerialNumber: xxxxxxxxxxx
[  660.010509] scsi host3: uas
[  660.011464] scsi 3:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[  660.012437] sd 3:0:0:0: Attached scsi generic sg1 type 0
[  660.012770] sd 3:0:0:0: [sdb] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[  660.130151] scsi 2:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[  660.130504] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  660.130865] sd 2:0:0:0: [sdc] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB)
[  660.132856] sd 2:0:0:0: [sdc] Write Protect is off
[  660.132859] sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
[  660.134164] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  660.157782]  sdc: sdc1 sdc2 sdc3
[  660.160427] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[  660.300054] sd 3:0:0:0: [sdb] Write Protect is off
[  660.300057] sd 3:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[  660.300231] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  660.300612] xhci_hcd 0000:05:00.0: ERROR Transfer event for unknown stream ring slot 3 ep 2
[  660.300617] xhci_hcd 0000:05:00.0: @0000000216098f30 00000000 00000000 1b000000 03038001
[  661.120084]  sdb: sdb1 sdb2 sdb3
[  661.121927] sd 3:0:0:0: [sdb] Attached SCSI disk
[  677.518303] hdaps: LENOVO ThinkPad R400 detected, setting orientation 1
[  677.519660] hdaps: initial mode latch is 0x05
[  677.519779] hdaps: setting ec_rate=250, filter_order=2
[  677.520221] hdaps: device successfully initialized.
[  677.522090] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input15
[  677.522384] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input16
[  677.525026] hdaps: driver successfully loaded.
[  677.570067] applesmc: supported laptop not found!
[  677.570069] applesmc: driver init failed (ret=-19)!
[  677.667503] acer_wmi: Acer Laptop ACPI-WMI Extras
[  677.667513] acer_wmi: No or unsupported WMI interface, unable to load
[  679.251926] EXT4-fs (sdc1): recovery complete
[  679.252872] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)

Last edited by whitesnow (2018-05-11 17:59:14)

Offline

#4 2018-05-05 10:52:00

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

@whitesnow have you read this similar thread?

Offline

#5 2018-05-07 16:56:31

whitesnow
Member
Registered: 2015-01-04
Posts: 52

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

At least now, I did read it.

But did not yet fully understand.

I would even say, it worked once, after I deinstalled the tlp service and package.

But after that it did not work again.
I even deinstalled powertop, which started with autotune, that did not make a difference.


The guy from the stackexchange post opened a bug report here
https://bugzilla.kernel.org/show_bug.cgi?id=199627

Last edited by whitesnow (2018-05-07 16:57:18)

Offline

#6 2018-05-07 17:10:44

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Could you identify the first kernel series that is affected with the issue?  You can obtain kernels not in the package cache from the ALA.

Offline

#7 2018-05-07 19:06:26

whitesnow
Member
Registered: 2015-01-04
Posts: 52

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

I will see, if I can manage that timewise.

Probably, I will need some help for that. Because I don't wont to destroy my system, it's encrypted and on zfs root.

But I have some spare space on that hdd, could install a base system in a new partition and test there.

Offline

#8 2018-05-07 19:19:42

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

The use of zfs does complicate things (not a criticism just an observation).  You could also try the linux-usb mailing list as the bug tracker is not referenced for drivers/usb/host/xhci-pci.c

$ perl scripts/get_maintainer.pl drivers/usb/host/xhci-pci.c
Mathias Nyman <mathias.nyman@intel.com> (supporter:USB XHCI DRIVER)
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (supporter:USB SUBSYSTEM)
linux-usb@vger.kernel.org (open list:USB XHCI DRIVER)
linux-kernel@vger.kernel.org (open list)

Offline

#9 2018-05-11 09:22:21

whitesnow
Member
Registered: 2015-01-04
Posts: 52

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Well, I may update step by step.

I uninstalled

Packages (5) acpi_call-1.1.0-126  acpid-2.0.29-2  acpitool-0.5.1-6
             tp-battery-mode-1.2.0-2  tpacpi-bat-3.1-1

After reboot, now the usb devices connected to that controller work, but not with full functionality.

As far as I remember that harddisk did give SMART information, which it does not do now.

Linux machine1.example.com 4.16.6-1-ARCH #1 SMP PREEMPT Mon Apr 30 12:30:03 UTC 2018 x86_64 GNU/Linux

sudo smartctl -a -d sat /dev/sdd -T permissive -T permissive -T permissive -T permissive -s on
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.16.6-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   [No Information Found]
Local Time is:    Fri May 11 10:58:10 2018 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
                  Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enable failed: scsi error unsupported field in scsi command

SMART Disabled. Use option -s with argument 'on' to enable it.
(override with '-T permissive' option)
lspci -vvk -s 05:00.0
05:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02) (prog-if 30 [XHCI])
        Physical Slot: 1
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at f1c00000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

$ lsusb
Bus 002 Device 003: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 0781:5583 SanDisk Corp. Ultra Fit
Bus 004 Device 003: ID 0bc2:61b7 Seagate RSS LLC Maxtor M3 Portable
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP)
Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC-2.1)
Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

 lsusb -v -s 004:001

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            4.16
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0

Offline

#10 2018-05-11 17:58:24

whitesnow
Member
Registered: 2015-01-04
Posts: 52

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

So, after testing some kernels
( I did uninstall tlp and acpid)
4.12.7-1-ARCH still shows the usb devices

4.12.8-1-ARCH does not show the usb devices

uname -a
Linux machine1.example.com 4.12.7-1-ARCH #1 SMP PREEMPT Sun Aug 13 08:17:09 CEST 2017 x86_64 GNU/Linux

sudo smartctl -a -d sat /dev/sdc
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.7-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 2.5 5400
...
# part from dmesg:

[   53.087719] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[   53.087858] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[   53.088241] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[   53.097530] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[   53.097597] pci 0000:05:00.0: enabling device (0000 -> 0002)
[   53.104734] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   53.104740] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[   53.110054] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[   53.110549] hub 3-0:1.0: USB hub found
[   53.110561] hub 3-0:1.0: 2 ports detected
[   53.110704] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   53.110709] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[   53.113550] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   53.113653] hub 4-0:1.0: USB hub found
[   53.113664] hub 4-0:1.0: 2 ports detected
[   54.164626] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[   54.760799] usbcore: registered new interface driver usb-storage
[   54.767622] scsi host4: uas
[   54.767790] usbcore: registered new interface driver uas
[   54.768233] scsi 4:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[   54.837998] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   54.838347] sd 4:0:0:0: [sdc] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[   54.838352] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[   54.838469] sd 4:0:0:0: [sdc] Write Protect is off
[   54.838474] sd 4:0:0:0: [sdc] Mode Sense: 4f 00 00 00
[   54.838676] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   54.839165] xhci_hcd 0000:05:00.0: ERROR Transfer event for disabled endpoint slot 2 ep 2 or incorrect stream ring
[   54.839298] xhci_hcd 0000:05:00.0: @00000004078cb460 00000000 00000000 1b000000 02038001
[   54.847692]  sdc: sdc1 sdc2 sdc3
[   54.848709] sd 4:0:0:0: [sdc] Attached SCSI disk
uname -a
Linux machine1.home-pc.example.com 4.12.8-1-ARCH #1 SMP PREEMPT Thu Aug 17 08:37:20 CEST 2017 x86_64 GNU/Linux

sudo smartctl -a -d sat /dev/sdc
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.8-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

Smartctl open device: /dev/sdc [SAT] failed: No such device

# it did not show up in dmesg

edit: there must have been something wrong, so here another boot with some logs:

uname -a
Linux machine1.example.com 4.12.8-1-ARCH #1 SMP PREEMPT Thu Aug 17 08:37:20 CEST 2017 x86_64 GNU/Linux

sudo smartctl -a -d sat /dev/sdc
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.8-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

Smartctl open device: /dev/sdc [SAT] failed: No such device

from dmesg:
[    0.000000] Linux version 4.12.8-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Thu Aug 17 08:37:20 CEST 2017

....
[   44.557408] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[   44.557502] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[   44.557837] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[   44.567298] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[   44.567346] pci 0000:05:00.0: enabling device (0000 -> 0002)
[   44.567590] xhci_hcd 0000:05:00.0: Resetting
[   45.998586] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   45.998594] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[   46.003983] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[   46.004393] hub 3-0:1.0: USB hub found
[   46.004403] hub 3-0:1.0: 2 ports detected
[   46.004487] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   46.004490] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[   46.007444] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   46.007596] hub 4-0:1.0: USB hub found
[   46.007656] hub 4-0:1.0: 2 ports detected
[   46.256478] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[   46.256600] xhci_hcd 0000:05:00.0: HC died; cleaning up
[   47.119161] xhci_hcd 0000:05:00.0: remove, state 4
[   47.119169] usb usb4: USB disconnect, device number 1
[   47.119348] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[   47.119354] xhci_hcd 0000:05:00.0: remove, state 1
[   47.119357] usb usb3: USB disconnect, device number 1
[   47.119632] xhci_hcd 0000:05:00.0: Host halt failed, -19
[   47.119641] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[   47.120211] xhci_hcd 0000:05:00.0: USB bus 3 deregistered

..
[  160.338448] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  160.338511] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  160.338757] pci 0000:05:00.0: PME# supported from D0 D3hot
[  160.348292] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[  160.348342] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  160.354537] pci 0000:05:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[  160.354636] xhci_hcd 0000:05:00.0: Resetting
[  161.448281] xhci_hcd 0000:05:00.0: Refused to change power state, currently in D3
[  161.448413] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  161.448429] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[  161.448465] xhci_hcd 0000:05:00.0: Host halt failed, -19
[  161.448468] xhci_hcd 0000:05:00.0: can't setup: -19
[  161.449415] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[  161.449512] xhci_hcd 0000:05:00.0: init 0000:05:00.0 fail, -19

and did fail in 4.13.1-1

uname -a
Linux machine1.example.com 4.13.1-1-ARCH #1 SMP PREEMPT Sun Sep 10 17:08:26 UTC 2017 x86_64 GNU/Linux
sudo smartctl -a -d sat /dev/sdc
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.13.1-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

Smartctl open device: /dev/sdc [SAT] failed: No such device
dmesg | tail -80
[   88.073782] xhci_hcd 0000:05:00.0: Resetting
[   89.488015] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   89.488021] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[   89.493437] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[   89.493869] hub 3-0:1.0: USB hub found
[   89.493879] hub 3-0:1.0: 2 ports detected
[   89.493958] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   89.493961] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[   89.496849] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   89.497010] hub 4-0:1.0: USB hub found
[   89.497072] hub 4-0:1.0: 2 ports detected
[   89.743513] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[   89.744524] xhci_hcd 0000:05:00.0: HC died; cleaning up
[   90.608398] xhci_hcd 0000:05:00.0: remove, state 4
[   90.608410] usb usb4: USB disconnect, device number 1
[   90.608577] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[   90.608583] xhci_hcd 0000:05:00.0: remove, state 1
[   90.608587] usb usb3: USB disconnect, device number 1
[   90.608844] xhci_hcd 0000:05:00.0: Host halt failed, -19
[   90.608853] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[   90.609378] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[   90.720278] iommu: Removing device 0000:05:00.0 from group 13
[   94.220311] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[   94.220390] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[   94.220660] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[   94.220778] iommu: Adding device 0000:05:00.0 to group 13
[   94.230183] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[   94.230248] pci 0000:05:00.0: enabling device (0000 -> 0002)
[   94.230675] xhci_hcd 0000:05:00.0: Resetting
[   95.647776] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   95.647782] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[   95.653176] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[   95.653602] hub 3-0:1.0: USB hub found
[   95.653612] hub 3-0:1.0: 2 ports detected
[   95.653693] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   95.653695] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[   95.656597] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   95.656741] hub 4-0:1.0: USB hub found
[   95.656802] hub 4-0:1.0: 2 ports detected
[   96.149475] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[   96.149970] xhci_hcd 0000:05:00.0: HC died; cleaning up
[   96.494492] usb usb3-port1: couldn't allocate usb_device
[   96.494551] usb usb4-port1: couldn't allocate usb_device
[   97.008019] xhci_hcd 0000:05:00.0: remove, state 1
[   97.008026] usb usb4: USB disconnect, device number 1
[   97.008175] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[   97.008180] xhci_hcd 0000:05:00.0: remove, state 1
[   97.008183] usb usb3: USB disconnect, device number 1
[   97.008353] xhci_hcd 0000:05:00.0: Host halt failed, -19
[   97.008363] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[   97.008874] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[   97.113593] iommu: Removing device 0000:05:00.0 from group 13
[  118.187036] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  118.187190] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  118.187616] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[  118.187858] iommu: Adding device 0000:05:00.0 to group 13
[  118.196849] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[  118.196911] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  118.197336] xhci_hcd 0000:05:00.0: Resetting
[  119.621653] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  119.621659] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[  119.627074] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[  119.627532] hub 3-0:1.0: USB hub found
[  119.627542] hub 3-0:1.0: 2 ports detected
[  119.627621] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  119.627624] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[  119.630485] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  119.630620] hub 4-0:1.0: USB hub found
[  119.630681] hub 4-0:1.0: 2 ports detected
[  119.883360] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[  119.884995] xhci_hcd 0000:05:00.0: HC died; cleaning up
[  120.727967] xhci_hcd 0000:05:00.0: remove, state 4
[  120.727972] usb usb4: USB disconnect, device number 1
[  120.728128] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[  120.728133] xhci_hcd 0000:05:00.0: remove, state 1
[  120.728136] usb usb3: USB disconnect, device number 1
[  120.728309] xhci_hcd 0000:05:00.0: Host halt failed, -19
[  120.728319] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[  120.728843] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[  120.833598] iommu: Removing device 0000:05:00.0 from group 13

Last edited by whitesnow (2018-05-11 18:41:07)

Offline

#11 2018-05-11 18:07:50

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

https://cdn.kernel.org/pub/linux/kernel … Log-4.12.8

commit 0e1f0eaed6c20db41ff61e024b361ee3ec9d686c
Author: Marc Zyngier <marc.zyngier@arm.com>
Date:   Tue Aug 1 20:11:08 2017 -0500

    xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
    
    commit 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 upstream.
    
    The Renesas uPD72020x XHCI controller seems to suffer from a really
    annoying bug, where it may retain some of its DMA programming across a XHCI
    reset, and despite the driver correctly programming new DMA addresses.
    This is visible if the device has been using 64-bit DMA addresses, and is
    then switched to using 32-bit DMA addresses.  The top 32 bits of the
    address (now zero) are ignored are replaced by the 32 bits from the
    *previous* programming.  Sticking with 64-bit DMA always works, but doesn't
    seem very appropriate.
    
    A PCI reset of the device restores the normal functionality, which is done
    at probe time.  Unfortunately, this has to be done before any quirk has
    been discovered, hence the intrusive nature of the fix.
    
    Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
    Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
    Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
    Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Seems a good candidate
Edit:

git checkout v4.12.8
git revert 0e1f0eaed6c20db41ff61e024b361ee3ec9d686c #revert the noted commit
git cherry-pick 854e55ad289ef8888e7991f0ada85d5846f5afb9 #cherry-pick a commit needed to build with gcc 8

see if that builds and does not have the issue

Last edited by loqs (2018-05-11 19:27:17)

Offline

#12 2018-05-12 05:09:38

whitesnow
Member
Registered: 2015-01-04
Posts: 52

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

make fails with

$ make
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CHK     include/generated/bounds.h
  CHK     include/generated/timeconst.h
  CHK     include/generated/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  DESCEND  objtool
  CC       /home/user/src/linux-stable/tools/objtool/pager.o
pager.c: In function ‘pager_preexec’:
pager.c:35:12: error: passing argument 2 to restrict-qualified parameter aliases with argument 4 [-Werror=restrict]
  select(1, &in, NULL, &in, NULL);
            ^~~        ~~~
cc1: all warnings being treated as errors
mv: cannot stat '/home/user/src/linux-stable/tools/objtool/.pager.o.tmp': No such file or directory
make[4]: *** [/home/user/src/linux-stable/tools/build/Makefile.build:102: /home/user/src/linux-stable/tools/objtool/pager.o] Error 1
make[3]: *** [Makefile:51: /home/user/src/linux-stable/tools/objtool/libsubcmd-in.o] Error 2
make[2]: *** [Makefile:59: /home/user/src/linux-stable/tools/objtool/libsubcmd.a] Error 2
make[1]: *** [Makefile:61: objtool] Error 2
make: *** [Makefile:1640: tools/objtool] Error 2

Offline

#13 2018-05-12 07:24:55

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

git cherry-pick ad343a98e74e85aa91d844310e797f96fee6983b

https://git.kernel.org/pub/scm/linux/ke … 96fee6983b

Offline

#14 2018-05-12 13:04:12

whitesnow
Member
Registered: 2015-01-04
Posts: 52

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

This is now working. Still not right away when booting with the inserted card.

But after taking the card out (laptop) and inserting it again.

from dmesg, booting with card:

[    0.000000] Linux version 4.12.8-ARCH-renesas+ (user@machine1.example.com) (gcc version 8.1.0 (GCC) ) #1 SMP PREEMPT Sat May 12 13:04:41 CEST 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-4.12.8-ARCH-renesas+ "acpi_osi=!Windows 2012" root=/dev/sda12 zswap.enabled=1 zswap.compressor=lz4 rw acpi_osi=Linux threadirqs pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.debug=0xe intel_iommu=igfx_off intel_iommu=soft pciehp.pciehp_force=1 verbose debug
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:

...
[    0.526536] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.526615] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf24fffff]
[    0.526695] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]

..
[    0.529106] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.536603] pci 0000:05:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[    0.536917] PCI: CLS 64 bytes, default 64
[    0.537031] Unpacking initramfs...
[    0.721596] Freeing initrd memory: 12084K
..

[   18.901080] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   18.923523] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   18.923612] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[   18.933592] Intel(R) Wireless WiFi driver for Linux
..
[   29.704558] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 32 (0,0)
[   50.232886] xhci_hcd 0000:05:00.0: can't setup: -110
[   50.233662] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[   50.234500] xhci_hcd 0000:05:00.0: init 0000:05:00.0 fail, -110
[   50.235283] xhci_hcd: probe of 0000:05:00.0 failed with error -110
[   50.299452] systemd-journald[285]: Successfully sent stream file descriptor to service manager.

..

and after removing and inserting the card

[  147.384118] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  147.384847] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  147.385830] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[  147.393981] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[  147.395884] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  147.398323] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  147.400181] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[  147.406983] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[  147.409074] hub 3-0:1.0: USB hub found
[  147.409658] hub 3-0:1.0: 2 ports detected
[  147.410312] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  147.410923] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[  147.411899] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  147.412838] hub 4-0:1.0: USB hub found
[  147.413493] hub 4-0:1.0: 2 ports detected
[  148.461078] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[  149.059523] usbcore: registered new interface driver usb-storage
[  149.067469] scsi host4: uas
[  149.069453] usbcore: registered new interface driver uas
[  149.073288] scsi 4:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[  149.134432] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  149.134781] sd 4:0:0:0: [sdc] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[  149.434841] sd 4:0:0:0: [sdc] Write Protect is off
[  149.437615] sd 4:0:0:0: [sdc] Mode Sense: 4f 00 00 00
[  149.440647] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  149.444980] xhci_hcd 0000:05:00.0: ERROR Transfer event for disabled endpoint slot 2 ep 2 or incorrect stream ring
[  149.447880] xhci_hcd 0000:05:00.0: @0000000407bf2460 00000000 00000000 1b000000 02038001
[  150.244012]  sdc: sdc1 sdc2 sdc3
[  150.248528] sd 4:0:0:0: [sdc] Attached SCSI disk
[  208.382098] systemd-journald[285]: Sent WATCHDOG=1 notification.

Last edited by whitesnow (2018-05-12 16:11:12)

Offline

#15 2018-05-12 14:35:01

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Is 4.12.8 with 0e1f0eaed6c20db41ff61e024b361ee3ec9d686c reverted producing the same results as 4.12.7?

Offline

#16 2018-05-12 16:10:42

whitesnow
Member
Registered: 2015-01-04
Posts: 52

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

As much as I understand, the results are the same. Now it got recognized right from booting up, in both kernels.

dmesg
[    0.000000] Linux version 4.12.7-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Sun Aug 13 08:17:09 CEST 2017
..
[   19.852461] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   19.904665] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   19.904756] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[   19.909864] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   19.911382] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[   19.912714] Intel(R) Wireless WiFi driver for Linux
[   19.912810] Copyright(c) 2003- 2015 Intel Corporation
[   19.916215] hub 3-0:1.0: USB hub found
[   19.916304] hub 3-0:1.0: 2 ports detected
[   19.916538] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   19.916625] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[   19.917847] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   19.918143] hub 4-0:1.0: USB hub found
[   19.918974] hub 4-0:1.0: 2 ports detected
..
[   20.925738] mousedev: PS/2 mouse device common for all mice
[   20.977167] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
..
[   22.119443] usbcore: registered new interface driver usb-storage
[   22.127542] scsi host4: uas
[   22.128556] usbcore: registered new interface driver uas
[   22.128910] scsi 4:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[   22.200545] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   22.204037] sd 4:0:0:0: [sdc] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[   22.489757] sd 4:0:0:0: [sdc] Write Protect is off
[   22.492783] sd 4:0:0:0: [sdc] Mode Sense: 4f 00 00 00
[   22.496008] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.499557] xhci_hcd 0000:05:00.0: ERROR Transfer event for disabled endpoint slot 2 ep 2 or incorrect stream ring
[   22.503014] xhci_hcd 0000:05:00.0: @00000004095e3460 00000000 00000000 1b000000 02038001
[   23.320848]  sdc: sdc1 sdc2 sdc3
[   23.325443] sd 4:0:0:0: [sdc] Attached SCSI disk
..
[    0.000000] Linux version 4.12.8-ARCH-renesas+ (user@machine1.example.com) (gcc version 8.1.0 (GCC) ) #1 SMP PREEMPT Sat May 12 13:04:41 CEST 2018
..

[   19.613703] PTP clock support registered
[   19.623368] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   19.623598] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[   19.629042] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[   19.637057] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
..
[   19.646685] hub 3-0:1.0: USB hub found
[   19.647038] hub 3-0:1.0: 2 ports detected
[   19.647269] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   19.647354] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[   19.647519] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   19.648562] hub 4-0:1.0: USB hub found
[   19.648654] hub 4-0:1.0: 2 ports detected
..
[   20.658782] mousedev: PS/2 mouse device common for all mice
[   20.701210] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[   20.876292] [drm:intel_panel_enable_backlight [i915]] pipe A
..
[   21.798867] usbcore: registered new interface driver usb-storage
[   21.807822] scsi host4: uas
[   21.809053] usbcore: registered new interface driver uas
[   21.809479] scsi 4:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[   21.851231] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   21.851655] sd 4:0:0:0: [sdc] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[   22.136476] sd 4:0:0:0: [sdc] Write Protect is off
[   22.139973] sd 4:0:0:0: [sdc] Mode Sense: 4f 00 00 00
[   22.143721] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.147661] xhci_hcd 0000:05:00.0: ERROR Transfer event for disabled endpoint slot 2 ep 2 or incorrect stream ring
[   22.151212] xhci_hcd 0000:05:00.0: @000000041970c460 00000000 00000000 1b000000 02038001
[   22.967354]  sdc: sdc1 sdc2 sdc3
[   22.972500] sd 4:0:0:0: [sdc] Attached SCSI disk
..

Offline

#17 2018-05-12 18:25:25

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

I would take what you have so far to the linux-usb mailing list.
http://www.linux-usb.org/mailing.html
https://www.kernel.org/doc/html/latest/ … -bugs.html

perl scripts/get_maintainer.pl drivers/usb/host/xhci-pci.c
Mathias Nyman <mathias.nyman@intel.com> (supporter:USB XHCI DRIVER)
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (supporter:USB SUBSYSTEM)
linux-usb@vger.kernel.org (open list:USB XHCI DRIVER)
linux-kernel@vger.kernel.org (open list)

Offline

#18 2018-05-26 19:54:33

Arch Linux Tux
Member
Registered: 2017-04-01
Posts: 34

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

I did not understand you (loqs) are the same that helped track the problem down with whitesnow in this thread, until now. (I'm "the guy from unix.stackexchange.com" as you might guess from the username)

Tow important information from me:

1. When I tested my Renesas express card with kernel 4.12.7-1 the card worked, when it was inserted it before booting up. When I reinserted the card, while Arch was running, it stopped working. (kernel paramater intel_iommu=off set).

2. I checked out the current kernel from Arch Build System and applied your "final" patch to it, as described in the other thread. But this does not work (no kernel parameters set).

Now my question is: Is there any use to compiling the kernel version v4.12.8 again with the revert and (the one?) cherry-pick applied to it, as described here?

And what about the other cherry-pick, you proposed later, should I also apply it?

Last edited by Arch Linux Tux (2018-05-28 17:30:38)


I do software development for fun and professionally!

I'm strongly interested in robotics and mechatronics! My favorite programming language is Rust

Offline

#19 2018-05-26 22:45:35

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Can you try the final patch with intel_iommu=on or intel_iommu=igfx_off before trying to build the older kernel my understanding of the new approach is it will just leave the controller broken if it is not behind a IOMMU.
With gcc 8 yes I believe you will need both cherry-picks in order build 4.12.8.  If the current proposed solution is not working 4.12.8 with the revert and the 2 cherry picks may still work.

Offline

#20 2018-05-27 17:36:10

Arch Linux Tux
Member
Registered: 2017-04-01
Posts: 34

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

So here are the results:

1.) The kernel with the "final patch" and intel_iommu=on or intel_iommu=igfx_off doesn't work
2.) The kernel 4.12.8 with the revert and the two cherry-picks gives the same result as 4.12.7 (with no kernel parameters):
     It works, when the express card is inserted while booting, but as soon as the card is reinserted, it doesn't work anymore.

Maybe I have to deinstall the same packages as whitesnow? I don't know.

Last edited by Arch Linux Tux (2018-05-27 17:38:50)


I do software development for fun and professionally!

I'm strongly interested in robotics and mechatronics! My favorite programming language is Rust

Offline

#21 2018-05-27 18:00:25

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

The new approach failing is disappointing.  Could you please report your findings to the linux-usb mailing list see if your results are expected.
They may want to you to repeat with the patches applied to the mainline tree.

Offline

#22 2018-05-28 18:00:46

Arch Linux Tux
Member
Registered: 2017-04-01
Posts: 34

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

When I try to send an email to "linux-usb@vger.kernel.org", it says: "policy analysis reported: Your address is not liked source for email".

How can I fix this error? And is this the way to go or should I choose another email?


I do software development for fun and professionally!

I'm strongly interested in robotics and mechatronics! My favorite programming language is Rust

Offline

#23 2018-05-28 19:02:34

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Never encountered such an issue before,  https://lkml.org/lkml/2006/8/16/38 seems similar.

Offline

#24 2018-05-29 18:33:42

whitesnow
Member
Registered: 2015-01-04
Posts: 52

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

You could send a mail to him personally. May be he reads that, or maybe not. I wrote to him on Sunday, and to the list on Wednesday. Received e-mail from him to me and to the list and someone else on Thursday.

Or you write to Greg, from him I got a bot message. Showing, that it will take some time, till he really will read the mail.

So I don't know, if these approaches will be sucessful, or getting another e-mail address will be easier.

Besides that, I should write an update on the situation.

So that controller -expresscard- in that laptop did work with kernel 4.16.9.

But, no more SMART values are shown (sudo smartctl -a -d sat /dev/sdb).
Not even on another usb port. Meaning on the built-in USB 2.0 ports.

And in the actual kernel 4.16.11 it is not working again.
SMART values are not shown still - so meaning via USB, the internal hdd does show them.

Using another type: smartctl -a -d scsi /dev/sdb
does show the header only.

sudo smartctl -a -d scsi /dev/sdb                                               
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.16.11-1-ARCH] (local build)                     
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org                   

=== START OF INFORMATION SECTION ===
Vendor:               Seagate
Product:              M3 Portable
Revision:             9300
Compliance:           SPC-4
User Capacity:        4,000,787,029,504 bytes [4.00 TB]                                       
Logical block size:   512 bytes
Physical block size:  4096 bytes
Logical Unit id:      0x5000000000000001
Serial number:        xxxx
Device type:          disk
Local Time is:        Tue May 29 20:25:51 2018 CEST                                           
SMART support is:     Available - device has SMART capability.                                
SMART support is:     Disabled
Temperature Warning:  Disabled or Not Supported                                               

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

Device does not support Self Test logging
sudo smartctl -a -d sat /dev/sdb 
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.16.11-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
sudo smartctl -a -d sat -T permissive -T permissive -T permissive /dev/sdb 
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.16.11-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   [No Information Found]
Local Time is:    Tue May 29 20:28:45 2018 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
                  Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.
SMART Disabled. Use option -s with argument 'on' to enable it.
(override with '-T permissive' option)

sudo smartctl -a -d sat -T permissive -T permissive -T permissive  -T permissive  -T permissive  -T permissive  -T permissive -s on  /dev/sdb  
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.16.11-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   [No Information Found]
Local Time is:    Tue May 29 20:29:58 2018 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
                  Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enable failed: scsi error unsupported field in scsi command

Read SMART Data failed: scsi error unsupported field in scsi command


=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error unsupported field in scsi command
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

Read SMART Error Log failed: scsi error unsupported field in scsi command

Read SMART Self-test Log failed: scsi error unsupported field in scsi command

Selective Self-tests/Logging not supported

Offline

#25 2018-05-30 12:48:54

Arch Linux Tux
Member
Registered: 2017-04-01
Posts: 34

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

I wrote an email to linux-usb@vger.kernel.org with my GMail (another) email-
account and got a response from Mathias Nyman <mathias.nyman@linux.intel.com>.

He asked me about logs for the 4.16.11 kernel with the three patches (and the
cherry pick).

He also suggested another kernel ("How about v4.16 without 0e1f0ea?
(reverting it) how does that behave?"). But I did not yet fully understand, what
he meant.

Last edited by Arch Linux Tux (2018-06-16 18:02:53)


I do software development for fun and professionally!

I'm strongly interested in robotics and mechatronics! My favorite programming language is Rust

Offline

Board footer

Powered by FluxBB