You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2018-05-31 12:27:49
- Aloha
- Member
- Registered: 2018-05-31
- Posts: 8
AMD discrete GPU stop working
Hi,
I'm using a laptop with Intel integrated GPU (Intel HD Graphics 3000) and a discrete AMD GPU (Radeon HD 6750M).
I installed open-source drivers and everything worked fine until last reboots.
Now each time I want to open an application using the prefix DRI_PRIME=1, my screen just freeze and the laptop shutdown with no visible errors.
I think that shutdown come to avoid extreme temperature on CPU because when I reboot just after, I sometimes see some errors like that:
CPU2: Core temperature above threshold, cpu clock throttledEven this simple command doesn't work and shutdown my computer:
DRI_PRIME=1 glxgears -infoDuring boot, I see those errors:
$ journalctl -b -p err
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!>
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!>
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!>
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!>
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!>
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!>
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!>
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!>
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!>
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!>
[drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!!
radeon 0000:01:00.0: failed initializing UVD (-1).And there are some information about the two GPU:
$ xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x6d cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 5 associated providers: 1 name:Intel
Provider 1: id: 0x45 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 6 outputs: 0 associated providers: 1 name:TURKS @ pci:0000:01:00.0$ glxinfo | grep "OpenGL renderer"
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile$ DRI_PRIME=1 glxinfo | grep "OpenGL renderer"
OpenGL renderer string: AMD TURKS (DRM 2.50.0 / 4.16.12-1-ARCH, LLVM 6.0.0)I don't know what kind of information I can provide you to give more details.
Sorry about my english and thanks for the help! :-)
Last edited by Aloha (2018-05-31 12:31:51)
Offline
#2 2018-05-31 20:51:14
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,982
Re: AMD discrete GPU stop working
post full journalctl output or dmesg , lspci -k , xorg log .
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#3 2018-05-31 23:16:55
- Aloha
- Member
- Registered: 2018-05-31
- Posts: 8
Re: AMD discrete GPU stop working
dmesg
[ 0.000000] Linux version 4.16.12-1-ARCH (builduser@heftig-2435) (gcc version 8.1.0 (GCC)) #1 SMP PREEMPT Fri May 25 23:30:31 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root rw cryptdevice=/dev/vglvm/root:root quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009abeefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009abef000-0x000000009aceefff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009acef000-0x000000009ae3dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ae3e000-0x000000009ae4efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009ae4f000-0x000000009aeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aeef000-0x000000009af9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009af9f000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.00 by Phoenix Technologies Ltd.
[ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aede000
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B/700Z3A/700Z4A/700Z5A/700Z5B, BIOS 11FD 02/10/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 09B000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 240000000 mask FE0000000 write-back
[ 0.000000] 8 base 25FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x18d655000, 0x18d655fff] PGTABLE
[ 0.000000] BRK [0x18d656000, 0x18d656fff] PGTABLE
[ 0.000000] BRK [0x18d657000, 0x18d657fff] PGTABLE
[ 0.000000] BRK [0x18d658000, 0x18d658fff] PGTABLE
[ 0.000000] BRK [0x18d659000, 0x18d659fff] PGTABLE
[ 0.000000] BRK [0x18d65a000, 0x18d65afff] PGTABLE
[ 0.000000] BRK [0x18d65b000, 0x18d65bfff] PGTABLE
[ 0.000000] BRK [0x18d65c000, 0x18d65cfff] PGTABLE
[ 0.000000] BRK [0x18d65d000, 0x18d65dfff] PGTABLE
[ 0.000000] BRK [0x18d65e000, 0x18d65efff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x3497a000-0x364b4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009AFFE014 000024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 0x000000009AFFE120 00009C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x000000009AFEF000 0000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x000000009AFF2000 0080BA (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 0x000000009AF37000 000040
[ 0.000000] ACPI: FACS 0x000000009AF37000 000040
[ 0.000000] ACPI: SLIC 0x000000009AFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 0x000000009AFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 0x000000009AFF1000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 0x000000009AFEE000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 0x000000009AFED000 000098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x000000009AFEC000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: TCPA 0x000000009AFEB000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: SSDT 0x000000009AFEA000 00094E (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000009AFE9000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000009AFE8000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x000000009AFE7000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000009AFE6000 000D97 (v01 SgRef SgTabl 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000009AFE5000 000A15 (v01 AmdRef AmdTabl 00001000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000009AFE4000 00021A (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25fdf8000-0x25fdfbfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009abeefff]
[ 0.000000] node 0: [mem 0x000000009afff000-0x000000009affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025fdfffff]
[ 0.000000] On node 0 totalpages: 2075022
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 158 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9840 pages used for memmap
[ 0.000000] DMA32 zone: 629744 pages, LIFO batch:31
[ 0.000000] Normal zone: 22520 pages used for memmap
[ 0.000000] Normal zone: 1441280 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0x9ba00000-0x9f9fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9abef000-0x9aceefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9acef000-0x9ae3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ae3e000-0x9ae4efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ae4f000-0x9aeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aeef000-0x9af9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9af9f000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9b9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ba00000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xf80f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xf80f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x4da with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2042440
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root rw cryptdevice=/dev/vglvm/root:root quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7989932K/8300088K available (10252K kernel code, 1261K rwdata, 3408K rodata, 1460K init, 640K bss, 310156K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 31755 entries in 125 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.016666] tsc: Fast TSC calibration using PIT
[ 0.019999] tsc: Detected 2195.060 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa3f82eccc, max_idle_ns: 440795283855 ns
[ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.04 BogoMIPS (lpj=7316866)
[ 0.019999] pid_max: default: 32768 minimum: 301
[ 0.019999] Security Framework initialized
[ 0.019999] Yama: becoming mindful.
[ 0.023367] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023972] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024003] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024023] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024243] Disabled fast string operations
[ 0.024247] CPU: Physical Processor ID: 0
[ 0.024247] CPU: Processor Core ID: 0
[ 0.024253] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024254] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024258] mce: CPU supports 9 MCE banks
[ 0.024267] CPU0: Thermal monitoring enabled (TM1)
[ 0.024277] process: using mwait in idle threads
[ 0.024280] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.024281] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.024283] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024284] Speculative Store Bypass: Vulnerable
[ 0.024388] Freeing SMP alternatives memory: 24K
[ 0.030794] TSC deadline timer enabled
[ 0.030798] smpboot: CPU0: Intel(R) Core(TM) i7-2675QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.043355] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.043415] core: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.043420] ... version: 3
[ 0.043422] ... bit width: 48
[ 0.043424] ... generic registers: 4
[ 0.043427] ... value mask: 0000ffffffffffff
[ 0.043428] ... max period: 00007fffffffffff
[ 0.043430] ... fixed-purpose events: 3
[ 0.043432] ... event mask: 000000070000000f
[ 0.050010] Hierarchical SRCU implementation.
[ 0.070340] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.076676] smp: Bringing up secondary CPUs ...
[ 0.106701] x86: Booting SMP configuration:
[ 0.106705] .... node #0, CPUs: #1
[ 0.003333] Disabled fast string operations
[ 0.136710] #2
[ 0.003333] Disabled fast string operations
[ 0.166708] #3
[ 0.003333] Disabled fast string operations
[ 0.196704] #4
[ 0.003333] Disabled fast string operations
[ 0.226703] #5
[ 0.003333] Disabled fast string operations
[ 0.256705] #6
[ 0.003333] Disabled fast string operations
[ 0.286707] #7
[ 0.003333] Disabled fast string operations
[ 0.289596] smp: Brought up 1 node, 8 CPUs
[ 0.289596] smpboot: Max logical packages: 1
[ 0.289596] smpboot: Total of 8 processors activated (35135.33 BogoMIPS)
[ 0.290401] devtmpfs: initialized
[ 0.290401] x86/mm: Memory block size: 128MB
[ 0.290792] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.290792] PM: Registering ACPI NVS region [mem 0x9ae3e000-0x9ae4efff] (69632 bytes)
[ 0.290792] PM: Registering ACPI NVS region [mem 0x9aeef000-0x9af9efff] (720896 bytes)
[ 0.290792] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.290792] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.290792] pinctrl core: initialized pinctrl subsystem
[ 0.290792] RTC time: 22:50:11, date: 05/31/18
[ 0.290792] NET: Registered protocol family 16
[ 0.290792] cpuidle: using governor ladder
[ 0.296688] cpuidle: using governor menu
[ 0.296773] ACPI: bus type PCI registered
[ 0.296775] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.296869] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.296877] PCI: not using MMCONFIG
[ 0.296877] PCI: Using configuration type 1 for base access
[ 0.296881] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.297781] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.297781] ACPI: Added _OSI(Module Device)
[ 0.297781] ACPI: Added _OSI(Processor Device)
[ 0.297781] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.297781] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.297781] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.309656] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.311243] ACPI: Dynamic OEM Table Load:
[ 0.311252] ACPI: SSDT 0xFFFF8BD815D1B000 000670 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.311830] ACPI: Dynamic OEM Table Load:
[ 0.311837] ACPI: SSDT 0xFFFF8BD815803800 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.312248] ACPI: Dynamic OEM Table Load:
[ 0.312253] ACPI: SSDT 0xFFFF8BD815FC7800 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.313205] ACPI: EC: EC started
[ 0.313205] ACPI: EC: interrupt blocked
[ 0.316817] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[ 0.316820] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.316822] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[ 0.316822] ACPI: Interpreter enabled
[ 0.316850] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.316851] ACPI: Using IOAPIC for interrupt routing
[ 0.316883] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.317451] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.317463] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.317781] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.328682] ACPI: Power Resource [FN00] (off)
[ 0.328801] ACPI: Power Resource [FN01] (off)
[ 0.328914] ACPI: Power Resource [FN02] (off)
[ 0.329027] ACPI: Power Resource [FN03] (off)
[ 0.329140] ACPI: Power Resource [FN04] (off)
[ 0.330149] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.330156] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.330464] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.331285] PCI host bridge to bus 0000:00
[ 0.331288] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.331290] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.331291] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.331293] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.331294] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.331296] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.331305] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.331422] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.331464] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.331570] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.331582] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.331588] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.331593] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.331606] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.331774] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.331813] pci 0000:00:16.0: reg 0x10: [mem 0xc0805000-0xc080500f 64bit]
[ 0.331923] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.332043] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.332076] pci 0000:00:1a.0: reg 0x10: [mem 0xc080a000-0xc080a3ff]
[ 0.332201] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.332312] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.332350] pci 0000:00:1b.0: reg 0x10: [mem 0xc0800000-0xc0803fff 64bit]
[ 0.332483] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.332601] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.332738] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.332859] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.332995] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.333109] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.333246] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.333376] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.333409] pci 0000:00:1d.0: reg 0x10: [mem 0xc0809000-0xc08093ff]
[ 0.333536] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.333642] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.333872] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.333906] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.333920] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.333933] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.333947] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.333960] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.333974] pci 0000:00:1f.2: reg 0x24: [mem 0xc0808000-0xc08087ff]
[ 0.334051] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.334151] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.334184] pci 0000:00:1f.3: reg 0x10: [mem 0xc0804000-0xc08040ff 64bit]
[ 0.334220] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.334407] pci 0000:01:00.0: [1002:6741] type 00 class 0x030000
[ 0.334429] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.334441] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc071ffff 64bit]
[ 0.334448] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.334462] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.334469] pci 0000:01:00.0: enabling Extended Tags
[ 0.334512] pci 0000:01:00.0: supports D1 D2
[ 0.343371] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.343379] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.343385] pci 0000:00:01.0: bridge window [mem 0xc0700000-0xc07fffff]
[ 0.343393] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.343576] pci 0000:02:00.0: [14e4:4357] type 00 class 0x028000
[ 0.343646] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc0603fff 64bit]
[ 0.343763] pci 0000:02:00.0: enabling Extended Tags
[ 0.343916] pci 0000:02:00.0: supports D1 D2
[ 0.343918] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.353427] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.353443] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff]
[ 0.353619] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.353754] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.353882] pci 0000:03:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[ 0.353961] pci 0000:03:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 0.354399] pci 0000:03:00.0: supports D1 D2
[ 0.354401] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.363446] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.363456] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.363480] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.363592] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.363656] pci 0000:04:00.0: reg 0x10: [mem 0xc0500000-0xc0507fff 64bit]
[ 0.363903] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.373399] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.373415] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.374565] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.374658] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.374751] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.374843] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.374934] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.375025] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.375116] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.375208] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.375892] ACPI: EC: interrupt unblocked
[ 0.375902] ACPI: EC: event unblocked
[ 0.375926] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.375928] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[ 0.376001] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.376001] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.376001] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.376001] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.376001] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.376001] vgaarb: loaded
[ 0.376001] EDAC MC: Ver: 3.0.0
[ 0.376001] Registered efivars operations
[ 0.391934] PCI: Using ACPI for IRQ routing
[ 0.395024] PCI: pci_cache_line_size set to 64 bytes
[ 0.395129] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.395130] e820: reserve RAM buffer [mem 0x9abef000-0x9bffffff]
[ 0.395132] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.395133] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
[ 0.395240] NetLabel: Initializing
[ 0.395241] NetLabel: domain hash size = 128
[ 0.395241] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.395255] NetLabel: unlabeled traffic allowed by default
[ 0.395260] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.395260] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.396688] clocksource: Switched to clocksource tsc-early
[ 0.407950] VFS: Disk quotas dquot_6.6.0
[ 0.407970] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.408046] pnp: PnP ACPI init
[ 0.408597] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.408599] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.408601] system 00:00: [io 0x5000-0x5003] has been reserved
[ 0.408603] system 00:00: [io 0xffff] has been reserved
[ 0.408604] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.408606] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.408608] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.408609] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.408611] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.408613] system 00:00: [io 0x5000-0x500f] could not be reserved
[ 0.408620] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.408650] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.408718] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.408723] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.408757] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.408812] pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.408895] pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.409092] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.409094] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.409096] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.409097] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.409099] system 00:06: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.409101] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.409103] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.409104] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.409106] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.409108] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.409112] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.409717] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.409748] pnp: PnP ACPI: found 8 devices
[ 0.415659] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.415665] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.415711] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0720000-0xc073ffff pref]
[ 0.415713] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.415716] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.415718] pci 0000:00:01.0: bridge window [mem 0xc0700000-0xc07fffff]
[ 0.415721] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.415725] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.415732] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff]
[ 0.415745] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.415748] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.415758] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.415767] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.415774] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.415787] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.415789] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.415791] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.415792] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[ 0.415794] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.415795] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.415797] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff]
[ 0.415798] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.415800] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
[ 0.415802] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.415803] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.415805] pci_bus 0000:04: resource 1 [mem 0xc0500000-0xc05fffff]
[ 0.415927] NET: Registered protocol family 2
[ 0.416079] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.416117] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.416261] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.416396] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.416441] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.416470] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.416533] NET: Registered protocol family 1
[ 0.416548] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.417270] PCI: CLS 64 bytes, default 64
[ 0.417312] Unpacking initramfs...
[ 0.937085] Freeing initrd memory: 27884K
[ 0.937089] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.937092] software IO TLB [mem 0x8fe4d000-0x93e4d000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.937288] Scanning for low memory corruption every 60 seconds
[ 0.937878] Initialise system trusted keyrings
[ 0.937887] Key type blacklist registered
[ 0.937941] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.939175] zbud: loaded
[ 0.940498] Key type asymmetric registered
[ 0.940500] Asymmetric key parser 'x509' registered
[ 0.940530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.940567] io scheduler noop registered
[ 0.940568] io scheduler deadline registered
[ 0.940610] io scheduler cfq registered (default)
[ 0.940611] io scheduler mq-deadline registered
[ 0.940612] io scheduler kyber registered
[ 0.940618] io scheduler bfq registered
[ 0.941458] efifb: probing for efifb
[ 0.941470] efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
[ 0.941472] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.941472] efifb: scrolling: redraw
[ 0.941474] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.943422] Console: switching to colour frame buffer device 128x48
[ 0.945268] fb0: EFI VGA frame buffer device
[ 0.945278] intel_idle: MWAIT substates: 0x21120
[ 0.945279] intel_idle: v0.4.1 model 0x2A
[ 0.945568] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.945634] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.945642] ACPI: Lid Switch [LID0]
[ 0.945679] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.945697] ACPI: Power Button [PWRB]
[ 0.945735] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.945747] ACPI: Power Button [PWRF]
[ 0.958735] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.958738] ACPI: Thermal Zone [TZ00] (67 C)
[ 0.959105] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.959106] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.959370] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.961609] intel_pstate: Intel P-state driver initializing
[ 0.962465] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.963150] NET: Registered protocol family 10
[ 0.974375] Segment Routing with IPv6
[ 0.974425] NET: Registered protocol family 17
[ 0.975880] RAS: Correctable Errors collector initialized.
[ 0.976006] microcode: sig=0x206a7, pf=0x10, revision=0x25
[ 0.976361] microcode: Microcode Update Driver: v2.2.
[ 0.976385] sched_clock: Marking stable (976347662, 0)->(968034431, 8313231)
[ 0.976828] registered taskstats version 1
[ 0.976835] Loading compiled-in X.509 certificates
[ 0.976851] zswap: loaded using pool lzo/zbud
[ 0.979543] Key type big_key registered
[ 0.979899] Magic number: 2:447:857
[ 0.979953] hctosys: unable to open rtc device (rtc0)
[ 0.984308] Freeing unused kernel memory: 1460K
[ 0.984311] Write protecting the kernel read-only data: 16384k
[ 0.985907] Freeing unused kernel memory: 2016K
[ 0.988129] Freeing unused kernel memory: 688K
[ 1.084408] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[ 1.088055] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.088111] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.090731] bcma: bus0: Found chip with id 43225, rev 0x01 and package 0x0A
[ 1.090770] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 1.090799] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 1.090859] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 1.096065] ACPI: bus type USB registered
[ 1.096089] usbcore: registered new interface driver usbfs
[ 1.096097] usbcore: registered new interface driver hub
[ 1.096132] usbcore: registered new device driver usb
[ 1.097826] SCSI subsystem initialized
[ 1.099561] cryptd: max_cpu_qlen set to 1000
[ 1.102098] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.102383] ehci-pci: EHCI PCI platform driver
[ 1.103077] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.103087] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[ 1.103114] bcma: bus0: Bus registered
[ 1.103148] AVX version of gcm_enc/dec engaged.
[ 1.103149] AES CTR mode by8 optimization enabled
[ 1.103377] libata version 3.00 loaded.
[ 1.140612] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.166145] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 1.166444] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.166446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.166447] usb usb1: Product: xHCI Host Controller
[ 1.166448] usb usb1: Manufacturer: Linux 4.16.12-1-ARCH xhci-hcd
[ 1.166449] usb usb1: SerialNumber: 0000:04:00.0
[ 1.166594] hub 1-0:1.0: USB hub found
[ 1.166606] hub 1-0:1.0: 2 ports detected
[ 1.166729] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.166733] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.166736] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[ 1.166749] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.166756] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.166770] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.166776] ehci-pci 0000:00:1a.0: debug port 2
[ 1.166790] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.166792] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.166793] usb usb2: Product: xHCI Host Controller
[ 1.166794] usb usb2: Manufacturer: Linux 4.16.12-1-ARCH xhci-hcd
[ 1.166795] usb usb2: SerialNumber: 0000:04:00.0
[ 1.166908] hub 2-0:1.0: USB hub found
[ 1.166921] hub 2-0:1.0: 2 ports detected
[ 1.170698] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.170715] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc080a000
[ 1.183378] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.183466] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.183469] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183471] usb usb3: Product: EHCI Host Controller
[ 1.183473] usb usb3: Manufacturer: Linux 4.16.12-1-ARCH ehci_hcd
[ 1.183475] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.183731] hub 3-0:1.0: USB hub found
[ 1.183744] hub 3-0:1.0: 2 ports detected
[ 1.184112] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.184118] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.184137] ehci-pci 0000:00:1d.0: debug port 2
[ 1.188060] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.188078] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0809000
[ 1.200036] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.200103] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.200106] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.200107] usb usb4: Product: EHCI Host Controller
[ 1.200109] usb usb4: Manufacturer: Linux 4.16.12-1-ARCH ehci_hcd
[ 1.200111] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.200359] hub 4-0:1.0: USB hub found
[ 1.200372] hub 4-0:1.0: 2 ports detected
[ 1.200577] ahci 0000:00:1f.2: version 3.0
[ 1.200892] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.211039] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[ 1.211043] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.250918] scsi host0: ahci
[ 1.251264] scsi host1: ahci
[ 1.251671] scsi host2: ahci
[ 1.252150] scsi host3: ahci
[ 1.252453] scsi host4: ahci
[ 1.252656] scsi host5: ahci
[ 1.252731] ata1: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808100 irq 32
[ 1.252735] ata2: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808180 irq 32
[ 1.252739] ata3: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808200 irq 32
[ 1.252743] ata4: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808280 irq 32
[ 1.252747] ata5: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808300 irq 32
[ 1.252749] ata6: DUMMY
[ 1.493454] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 1.513455] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.533433] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.567906] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.569730] ata1.00: supports DRM functions and may not be fully accessible
[ 1.570387] ata1.00: NCQ Send/Recv Log not supported
[ 1.570394] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[ 1.570399] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.572435] ata1.00: supports DRM functions and may not be fully accessible
[ 1.572979] ata1.00: NCQ Send/Recv Log not supported
[ 1.574107] ata1.00: configured for UDMA/133
[ 1.584965] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.640211] usb 1-2: New USB device found, idVendor=18d1, idProduct=4ee7
[ 1.640220] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.640224] usb 1-2: Product: Nexus 5X
[ 1.640228] usb 1-2: Manufacturer: LGE
[ 1.640232] usb 1-2: SerialNumber: 02715110dfd824a7
[ 1.660882] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.660890] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.661594] hub 3-1:1.0: USB hub found
[ 1.661794] hub 3-1:1.0: 6 ports detected
[ 1.680568] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.680575] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.681147] hub 4-1:1.0: USB hub found
[ 1.681265] hub 4-1:1.0: 6 ports detected
[ 1.901228] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.901944] ata2.00: ATA-8: SanDisk iSSD P4 8GB, SSD 9.14, max UDMA/133
[ 1.901952] ata2.00: 15649200 sectors, multi 1: LBA48
[ 1.902702] ata2.00: configured for UDMA/133
[ 1.903290] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 9.14 PQ: 0 ANSI: 5
[ 1.940120] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.943722] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[ 1.943744] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[ 1.943831] clocksource: Switched to clocksource tsc
[ 1.960099] usb 4-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.062806] usb 4-1.3: New USB device found, idVendor=0a5c, idProduct=219a
[ 2.062814] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.062819] usb 4-1.3: Product: Broadcom Bluetooth Device
[ 2.062823] usb 4-1.3: Manufacturer: Broadcom Corp
[ 2.062827] usb 4-1.3: SerialNumber: E0CA94AED612
[ 2.200654] usb 3-1.4: New USB device found, idVendor=2232, idProduct=1018
[ 2.200663] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.200667] usb 3-1.4: Product: WebCam SC-13HDL11431N
[ 2.200671] usb 3-1.4: Manufacturer: 123
[ 2.217929] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.219907] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A7AS, 1.00, max UDMA/100
[ 2.222726] ata3.00: configured for UDMA/100
[ 2.227505] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A7AS 1.00 PQ: 0 ANSI: 5
[ 2.594641] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.907998] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.920580] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.920604] sd 0:0:0:0: [sda] Write Protect is off
[ 2.920609] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.920662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.920854] sd 1:0:0:0: [sdb] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 2.920876] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.920880] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.920960] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.924725] sda: sda1 sda2 sda3
[ 2.924933] sdb:
[ 2.925158] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.925302] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.925304] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.938119] random: fast init done
[ 2.943439] random: lvm: uninitialized urandom read (4 bytes read)
[ 2.950357] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 2.950374] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.950593] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.966817] device-mapper: uevent: version 1.0.3
[ 2.966972] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 2.968793] random: lvm: uninitialized urandom read (2 bytes read)
[ 10.881967] random: crng init done
[ 12.872690] NET: Registered protocol family 38
[ 13.301625] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 13.518119] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 13.533680] systemd[1]: Detected architecture x86-64.
[ 13.538261] systemd[1]: Set hostname to <boo>.
[ 13.638129] systemd[1]: Listening on udev Control Socket.
[ 13.638224] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.638286] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.638463] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.639686] systemd[1]: Listening on Process Core Dump Socket.
[ 13.639733] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.646939] systemd[1]: Created slice system-getty.slice.
[ 13.669876] EXT4-fs (dm-4): re-mounted. Opts: discard
[ 13.717661] systemd-journald[357]: Received request to flush runtime journal from PID 1
[ 13.798306] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.803013] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180105/utaddress-247)
[ 13.803022] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.803026] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[ 13.803325] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180105/utaddress-247)
[ 13.803331] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.803383] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[ 13.803388] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180105/utaddress-247)
[ 13.803392] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.803393] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[ 13.803398] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180105/utaddress-247)
[ 13.803401] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.803402] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 13.806623] ACPI: AC Adapter [ADP1] (on-line)
[ 13.832043] Linux agpgart interface v0.103
[ 13.857345] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 13.857384] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 13.861958] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.861968] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 13.865064] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x00000000100001bb, e8:03:9a:9c:b1:b0, XID 0c900800 IRQ 34
[ 13.865067] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 13.870614] ACPI: Battery Slot [BAT1] (battery present)
[ 13.877139] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 13.882242] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.889440] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 13.889443] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 13.889444] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 13.889445] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 13.898251] tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16)
[ 13.939114] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 13.941699] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 13.969815] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 13.969863] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 13.986737] tpm tpm0: A TPM error (7) occurred attempting get random
[ 14.075245] iTCO_vendor_support: vendor-support=0
[ 14.081897] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 14.081956] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 14.082070] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 14.082085] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.095738] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 14.096359] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 14.096362] cfg80211: failed to load regulatory.db
[ 14.098105] intel_rapl: Found RAPL domain package
[ 14.098108] intel_rapl: Found RAPL domain core
[ 14.098109] intel_rapl: Found RAPL domain uncore
[ 14.098115] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 14.101438] r8169 0000:03:00.0 net0: renamed from eth0
[ 14.193270] Adding 4194300k swap on /dev/mapper/swap. Priority:-2 extents:1 across:4194300k SSFS
[ 14.204459] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[ 14.204461] fb: switching to inteldrmfb from EFI VGA
[ 14.204485] Console: switching to colour dummy device 80x25
[ 14.204824] [drm] Replacing VGA console driver
[ 14.205627] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.205628] [drm] Driver supports precise vblank timestamp query.
[ 14.206954] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 14.227991] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 14.228005] b43: probe of bcma0:1 failed with error -524
[ 14.228027] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 14.231068] [drm] radeon kernel modesetting enabled.
[ 14.231096] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 14.231244] ATPX version 1, functions 0x00000031
[ 14.231453] radeon 0000:01:00.0: enabling device (0006 -> 0007)
[ 14.231778] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x144D:0xC0B3 0x00).
[ 14.231804] vga_switcheroo: enabled
[ 14.352249] ATOM BIOS: Samsung
[ 14.352318] [drm] GPU not posted. posting now...
[ 14.356646] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 14.356649] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 14.356660] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 14.356661] [drm] RAM width 128bits DDR
[ 14.357314] [TTM] Zone kernel: Available graphics memory: 4041182 kiB
[ 14.357316] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 14.357317] [TTM] Initializing pool allocator
[ 14.357323] [TTM] Initializing DMA pool allocator
[ 14.357348] [drm] radeon: 1024M of VRAM memory ready
[ 14.357349] [drm] radeon: 1024M of GTT memory ready.
[ 14.357371] [drm] Loading TURKS Microcode
[ 14.363070] [drm] Internal thermal controller with fan control
[ 14.368046] [drm] radeon: dpm initialized
[ 14.369558] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 14.370507] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 14.375782] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 14.375918] radeon 0000:01:00.0: WB enabled
[ 14.375922] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000000a84d2a6
[ 14.375924] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000369120e7
[ 14.377795] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0000000047480355
[ 14.377799] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.377800] [drm] Driver supports precise vblank timestamp query.
[ 14.377802] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 14.377852] radeon 0000:01:00.0: radeon: using MSI.
[ 14.377899] [drm] radeon: irq initialized.
[ 14.392837] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 16
[ 14.395719] [drm] ring test on 0 succeeded in 2 usecs
[ 14.395732] [drm] ring test on 3 succeeded in 6 usecs
[ 14.398848] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.399221] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 497
[ 14.400480] brcmsmac bcma0:1 wifi0: renamed from wlan0
[ 14.800235] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f06)
[ 14.815860] psmouse serio1: elantech: Synaptics capabilities query result 0x21, 0x15, 0x0f.
[ 14.832000] psmouse serio1: elantech: Elan sample query result 0b, 06, 74
[ 14.912343] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 14.915018] mousedev: PS/2 mouse device common for all mice
[ 15.279241] EXT4-fs (dm-7): mounting with "discard" option, but the device does not support discard
[ 15.279244] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard
[ 15.576668] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 15.807590] IPv6: ADDRCONF(NETDEV_UP): net0: link is not ready
[ 15.944813] r8169 0000:03:00.0 net0: link down
[ 15.944892] IPv6: ADDRCONF(NETDEV_UP): net0: link is not ready
[ 15.948642] IPv6: ADDRCONF(NETDEV_UP): wifi0: link is not ready
[ 16.599549] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 17.622414] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 18.645282] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 19.668156] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 20.691022] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 21.713881] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 22.736753] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 23.759613] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 24.030744] Bluetooth: Core ver 2.22
[ 24.030764] NET: Registered protocol family 31
[ 24.030764] Bluetooth: HCI device and connection manager initialized
[ 24.030768] Bluetooth: HCI socket layer initialized
[ 24.030770] Bluetooth: L2CAP socket layer initialized
[ 24.030775] Bluetooth: SCO socket layer initialized
[ 24.037635] usbcore: registered new interface driver btusb
[ 24.782512] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 24.802591] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!!
[ 24.802626] radeon 0000:01:00.0: failed initializing UVD (-1).
[ 25.810311] [drm:r600_ib_test [radeon]] *ERROR* radeon: fence wait timed out.
[ 25.810430] [drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed testing IB on GFX ring (-110).
[ 25.810518] [drm:radeon_device_init [radeon]] *ERROR* ib ring test failed (-110).
[ 25.819252] [drm] Radeon Display Connectors
[ 25.829047] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[ 25.829541] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[ 25.829733] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 25.831576] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 27.690885] acpi device:2d: registered as cooling_device14
[ 27.691077] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input7
[ 27.693958] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 29.554291] acpi device:3a: registered as cooling_device15
[ 29.554716] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 29.555287] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 29.570860] fbcon: inteldrmfb (fb0) is primary device
[ 30.598409] Console: switching to colour frame buffer device 200x56
[ 30.621800] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 30.654417] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 30.660071] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 30.660163] radeon 0000:01:00.0: WB enabled
[ 30.660166] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000000a84d2a6
[ 30.660168] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000369120e7
[ 30.660914] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0000000047480355
[ 30.681178] [drm] ring test on 0 succeeded in 2 usecs
[ 30.681189] [drm] ring test on 3 succeeded in 6 usecs
[ 30.688594] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker
[ 30.688597] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 30.688598] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 30.688599] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 30.688600] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 30.688602] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 30.688603] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 30.704918] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 30.705001] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 30.705074] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 31.861821] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 32.884714] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 33.907594] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 34.930479] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 35.953358] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 36.976235] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 37.999112] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 39.021990] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 40.044868] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 41.067747] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 41.087845] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!!
[ 41.087899] radeon 0000:01:00.0: failed initializing UVD (-1).
[ 42.103624] [drm:r600_ib_test [radeon]] *ERROR* radeon: fence wait timed out.
[ 42.103818] [drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed testing IB on GFX ring (-110).
[ 42.103969] [drm:radeon_resume_kms [radeon]] *ERROR* ib ring test failed (-110).
[ 48.678484] media: Linux media interface: v0.10
[ 48.694264] Linux video capture interface: v2.00
[ 48.713861] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[ 48.733348] uvcvideo 3-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[ 48.733351] uvcvideo 3-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[ 48.733353] uvcvideo 3-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[ 48.733440] input: WebCam SC-13HDL11431N: WebCam S as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input12
[ 48.733541] usbcore: registered new interface driver uvcvideo
[ 48.733542] USB Video Class driver (1.1.1)
[ 64.619280] fuse init (API version 7.26)
[ 71.242296] usb 1-2: USB disconnect, device number 2
[ 71.566810] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 71.711663] usb 1-2: New USB device found, idVendor=18d1, idProduct=4ee4
[ 71.711672] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 71.711677] usb 1-2: Product: Nexus 5X
[ 71.711681] usb 1-2: Manufacturer: LGE
[ 71.711685] usb 1-2: SerialNumber: 02715110dfd824a7
[ 73.301655] usbcore: registered new interface driver cdc_ether
[ 73.304516] rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:04:00.0-2, RNDIS device, 76:9f:34:02:a3:74
[ 73.304553] usbcore: registered new interface driver rndis_host
[ 76.173343] rndis_host 1-2:1.0 android0: renamed from usb0
[ 76.211846] IPv6: ADDRCONF(NETDEV_UP): android0: link is not readylspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Samsung Electronics Co Ltd 2nd Generation Core Processor Family DRAM Controller
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Samsung Electronics Co Ltd 2nd Generation Core Processor Family Integrated Graphics Controller
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family MEI Controller
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
Subsystem: Samsung Electronics Co Ltd HM65 Express Chipset Family LPC Controller
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller (rev 04)
Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family SMBus Controller
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M]
Subsystem: Samsung Electronics Co Ltd Radeon HD 6750M
Kernel driver in use: radeon
Kernel modules: radeon
02:00.0 Network controller: Broadcom Limited BCM43225 802.11b/g/n (rev 01)
Subsystem: Askey Computer Corp. BCM43225 802.11b/g/n
Kernel driver in use: bcma-pci-bridge
Kernel modules: bcma
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Samsung Electronics Co Ltd RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Subsystem: Samsung Electronics Co Ltd ASM1042 SuperSpeed USB Host Controller
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pciXorg.log
[ 63.708] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 63.710]
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[ 63.710] Build Operating System: Linux Arch Linux
[ 63.710] Current Operating System: Linux boo 4.16.12-1-ARCH #1 SMP PREEMPT Fri May 25 23:30:31 UTC 2018 x86_64
[ 63.710] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root rw cryptdevice=/dev/vglvm/root:root quiet
[ 63.710] Build Date: 16 May 2018 05:24:07PM
[ 63.710]
[ 63.712] Current version of pixman: 0.34.0
[ 63.714] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 63.714] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 63.720] (==) Log file: "/home/thomas/.local/share/xorg/Xorg.0.log", Time: Fri Jun 1 00:51:14 2018
[ 63.728] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 63.729] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 63.732] (==) No Layout section. Using the first Screen section.
[ 63.732] (==) No screen section available. Using defaults.
[ 63.732] (**) |-->Screen "Default Screen Section" (0)
[ 63.732] (**) | |-->Monitor "<default monitor>"
[ 63.732] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 63.732] (==) Automatically adding devices
[ 63.732] (==) Automatically enabling devices
[ 63.732] (==) Automatically adding GPU devices
[ 63.732] (==) Automatically binding GPU devices
[ 63.732] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 63.736] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 63.736] Entry deleted from font path.
[ 63.736] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 63.737] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/75dpi
[ 63.737] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 63.737] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 63.737] (II) Module ABI versions:
[ 63.737] X.Org ANSI C Emulation: 0.4
[ 63.737] X.Org Video Driver: 24.0
[ 63.737] X.Org XInput driver : 24.1
[ 63.737] X.Org Server Extension : 10.0
[ 63.738] (++) using VT number 1
[ 63.741] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 63.742] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 63.743] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 63.743] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 63.744] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 63.749] (--) PCI:*(0@0:2:0) 8086:0116:144d:c0b3 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 63.749] (--) PCI: (1@0:0:0) 1002:6741:144d:c0b3 rev 0, Mem @ 0xa0000000/268435456, 0xc0700000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 63.749] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 63.749] (II) LoadModule: "glx"
[ 63.759] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 63.771] (II) Module glx: vendor="X.Org Foundation"
[ 63.771] compiled for 1.20.0, module version = 1.0.0
[ 63.772] ABI class: X.Org Server Extension, version 10.0
[ 63.772] (II) Applying OutputClass "Radeon" to /dev/dri/card1
[ 63.772] loading driver: radeon
[ 63.772] (==) Matched intel as autoconfigured driver 0
[ 63.772] (==) Matched radeon as autoconfigured driver 1
[ 63.772] (==) Matched ati as autoconfigured driver 2
[ 63.772] (==) Matched modesetting as autoconfigured driver 3
[ 63.772] (==) Matched fbdev as autoconfigured driver 4
[ 63.772] (==) Matched vesa as autoconfigured driver 5
[ 63.772] (==) Assigned the driver to the xf86ConfigLayout
[ 63.772] (II) LoadModule: "intel"
[ 63.772] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 63.776] (II) Module intel: vendor="X.Org Foundation"
[ 63.776] compiled for 1.20.0, module version = 2.99.917
[ 63.776] Module class: X.Org Video Driver
[ 63.776] ABI class: X.Org Video Driver, version 24.0
[ 63.776] (II) LoadModule: "radeon"
[ 63.777] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 63.783] (II) Module radeon: vendor="X.Org Foundation"
[ 63.783] compiled for 1.20.0, module version = 18.0.1
[ 63.783] Module class: X.Org Video Driver
[ 63.783] ABI class: X.Org Video Driver, version 24.0
[ 63.783] (II) LoadModule: "ati"
[ 63.783] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 63.783] (II) Module ati: vendor="X.Org Foundation"
[ 63.784] compiled for 1.20.0, module version = 18.0.1
[ 63.784] Module class: X.Org Video Driver
[ 63.784] ABI class: X.Org Video Driver, version 24.0
[ 63.784] (II) LoadModule: "modesetting"
[ 63.784] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 63.788] (II) Module modesetting: vendor="X.Org Foundation"
[ 63.788] compiled for 1.20.0, module version = 1.20.0
[ 63.788] Module class: X.Org Video Driver
[ 63.788] ABI class: X.Org Video Driver, version 24.0
[ 63.788] (II) LoadModule: "fbdev"
[ 63.789] (WW) Warning, couldn't open module fbdev
[ 63.789] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 63.789] (II) LoadModule: "vesa"
[ 63.789] (WW) Warning, couldn't open module vesa
[ 63.789] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 63.789] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 63.789] (II) intel: Driver for Intel(R) HD Graphics
[ 63.789] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 63.789] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 63.789] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
ATI Radeon 9800PRO, ATI Radeon 9800XT,
ATI Radeon Mobility 9600/9700 (M10/M11),
ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
ATI FireGL V3350, ATI Mobility Radeon X1450,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
ATI FireGL V3400, ATI Mobility FireGL V5250,
ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
MULLINS, KAVERI, HAWAII
[ 63.793] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 63.793] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 63.794] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20171222
[ 63.794] (II) intel(0): SNA compiled from 2.99.917-831-ge7bfc906
[ 63.811] (WW) Falling back to old probe method for modesetting
[ 63.811] (II) [KMS] Kernel modesetting enabled.
[ 63.811] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 63.812] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 63.812] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[ 63.812] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 63.812] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 63.812] (==) intel(0): RGB weight 888
[ 63.812] (==) intel(0): Default visual is TrueColor
[ 63.813] (II) intel(0): Output LVDS1 has no monitor section
[ 63.814] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 63.814] (II) intel(0): Enabled output LVDS1
[ 63.814] (II) intel(0): Output VGA1 has no monitor section
[ 63.815] (II) intel(0): Enabled output VGA1
[ 63.815] (II) intel(0): Output HDMI1 has no monitor section
[ 63.815] (II) intel(0): Enabled output HDMI1
[ 63.815] (II) intel(0): Output DP1 has no monitor section
[ 63.815] (II) intel(0): Enabled output DP1
[ 63.815] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 63.815] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 63.816] (II) intel(0): Enabled output VIRTUAL1
[ 63.816] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 63.816] (==) intel(0): TearFree disabled
[ 63.816] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 63.816] (==) intel(0): DPI set to (96, 96)
[ 63.816] (II) Loading sub module "dri3"
[ 63.816] (II) LoadModule: "dri3"
[ 63.816] (II) Module "dri3" already built-in
[ 63.816] (II) Loading sub module "dri2"
[ 63.816] (II) LoadModule: "dri2"
[ 63.816] (II) Module "dri2" already built-in
[ 63.816] (II) Loading sub module "present"
[ 63.816] (II) LoadModule: "present"
[ 63.816] (II) Module "present" already built-in
[ 63.816] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[ 63.816] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 63.816] (==) RADEON(G0): Default visual is TrueColor
[ 63.816] (==) RADEON(G0): RGB weight 888
[ 63.816] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[ 63.816] (--) RADEON(G0): Chipset: "TURKS" (ChipID = 0x6741)
[ 63.816] (II) Loading sub module "fb"
[ 63.816] (II) LoadModule: "fb"
[ 63.816] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 63.818] (II) Module fb: vendor="X.Org Foundation"
[ 63.818] compiled for 1.20.0, module version = 1.0.0
[ 63.818] ABI class: X.Org ANSI C Emulation, version 0.4
[ 63.818] (II) RADEON(G0): GPU accel disabled or not working, using shadowfb for KMS
[ 63.818] (II) Loading sub module "shadow"
[ 63.818] (II) LoadModule: "shadow"
[ 63.818] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 63.819] (II) Module shadow: vendor="X.Org Foundation"
[ 63.820] compiled for 1.20.0, module version = 1.1.0
[ 63.820] ABI class: X.Org ANSI C Emulation, version 0.4
[ 63.820] (II) RADEON(G0): KMS Color Tiling: disabled
[ 63.820] (II) RADEON(G0): KMS Color Tiling 2D: disabled
[ 63.820] (II) RADEON(G0): mem size init: gart size :3fdde000 vram size: s:40000000 visible:fc9d000
[ 63.820] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM
[ 63.820] (==) RADEON(G0): DPI set to (96, 96)
[ 63.820] (==) RADEON(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 63.820] (II) Loading sub module "ramdac"
[ 63.820] (II) LoadModule: "ramdac"
[ 63.820] (II) Module "ramdac" already built-in
[ 63.820] (II) UnloadModule: "modesetting"
[ 63.820] (II) Unloading modesetting
[ 63.821] (II) RADEON(G0): Front buffer size: 3072K
[ 63.821] (II) RADEON(G0): VRAM usage limit set to 229957K
[ 63.822] (==) RADEON(G0): Backing store enabled
[ 63.822] (WW) RADEON(G0): Direct rendering disabled
[ 63.822] (II) RADEON(G0): Acceleration disabled
[ 63.822] (==) RADEON(G0): DPMS enabled
[ 63.822] (==) RADEON(G0): Silken mouse disabled
[ 63.826] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 63.826] (==) intel(0): Backing store enabled
[ 63.826] (==) intel(0): Silken mouse disabled
[ 63.826] (II) intel(0): HW Cursor enabled
[ 63.827] (==) intel(0): DPMS enabled
[ 63.827] (==) intel(0): Display hotplug detection enabled
[ 63.827] (II) intel(0): [DRI2] Setup complete
[ 63.827] (II) intel(0): [DRI2] DRI driver: i965
[ 63.827] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 63.827] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 63.827] (II) intel(0): hardware support for Present enabled
[ 63.827] (II) Initializing extension Generic Event Extension
[ 63.827] (II) Initializing extension SHAPE
[ 63.827] (II) Initializing extension MIT-SHM
[ 63.827] (II) Initializing extension XInputExtension
[ 63.827] (II) Initializing extension XTEST
[ 63.827] (II) Initializing extension BIG-REQUESTS
[ 63.827] (II) Initializing extension SYNC
[ 63.827] (II) Initializing extension XKEYBOARD
[ 63.827] (II) Initializing extension XC-MISC
[ 63.827] (II) Initializing extension SECURITY
[ 63.827] (II) Initializing extension XFIXES
[ 63.827] (II) Initializing extension RENDER
[ 63.827] (II) Initializing extension RANDR
[ 63.827] (II) Initializing extension COMPOSITE
[ 63.827] (II) Initializing extension DAMAGE
[ 63.827] (II) Initializing extension MIT-SCREEN-SAVER
[ 63.827] (II) Initializing extension DOUBLE-BUFFER
[ 63.827] (II) Initializing extension RECORD
[ 63.827] (II) Initializing extension DPMS
[ 63.827] (II) Initializing extension Present
[ 63.827] (II) Initializing extension DRI3
[ 63.827] (II) Initializing extension X-Resource
[ 63.827] (II) Initializing extension XVideo
[ 63.827] (II) Initializing extension XVideo-MotionCompensation
[ 63.827] (II) Initializing extension GLX
[ 63.876] (II) AIGLX: Loaded and initialized i965
[ 63.876] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 63.876] (II) Initializing extension XFree86-VidModeExtension
[ 63.876] (II) Initializing extension XFree86-DGA
[ 63.876] (II) Initializing extension XFree86-DRI
[ 63.876] (II) Initializing extension DRI2
[ 63.901] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 63.916] (II) intel(0): Setting screen physical size to 423 x 238
[ 64.020] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 64.020] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 64.020] (**) Power Button: Applying InputClass "system-keyboard"
[ 64.020] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 64.020] (II) LoadModule: "libinput"
[ 64.020] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 64.028] (II) Module libinput: vendor="X.Org Foundation"
[ 64.028] compiled for 1.19.6, module version = 0.27.1
[ 64.028] Module class: X.Org XInput Driver
[ 64.028] ABI class: X.Org XInput driver, version 24.1
[ 64.028] (II) Using input driver 'libinput' for 'Power Button'
[ 64.029] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 17 paused 0
[ 64.029] (**) Power Button: always reports core events
[ 64.029] (**) Option "Device" "/dev/input/event2"
[ 64.029] (**) Option "_source" "server/udev"
[ 64.030] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 64.030] (II) event2 - Power Button: device is a keyboard
[ 64.030] (II) event2 - Power Button: device removed
[ 64.030] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 64.030] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 64.030] (**) Option "xkb_layout" "fr"
[ 64.030] (**) Option "xkb_variant" "latin9"
[ 64.059] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 64.059] (II) event2 - Power Button: device is a keyboard
[ 64.059] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 64.059] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 64.059] (**) Video Bus: Applying InputClass "system-keyboard"
[ 64.059] (**) Video Bus: Applying InputClass "Keyboard Layout"
[ 64.059] (II) Using input driver 'libinput' for 'Video Bus'
[ 64.061] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 20 paused 0
[ 64.061] (**) Video Bus: always reports core events
[ 64.061] (**) Option "Device" "/dev/input/event7"
[ 64.061] (**) Option "_source" "server/udev"
[ 64.061] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 64.061] (II) event7 - Video Bus: device is a keyboard
[ 64.061] (II) event7 - Video Bus: device removed
[ 64.061] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event7"
[ 64.061] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 64.061] (**) Option "xkb_layout" "fr"
[ 64.061] (**) Option "xkb_variant" "latin9"
[ 64.062] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 64.062] (II) event7 - Video Bus: device is a keyboard
[ 64.063] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 64.063] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 64.063] (**) Video Bus: Applying InputClass "system-keyboard"
[ 64.063] (**) Video Bus: Applying InputClass "Keyboard Layout"
[ 64.063] (II) Using input driver 'libinput' for 'Video Bus'
[ 64.064] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 21 paused 0
[ 64.064] (**) Video Bus: always reports core events
[ 64.064] (**) Option "Device" "/dev/input/event6"
[ 64.064] (**) Option "_source" "server/udev"
[ 64.065] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 64.065] (II) event6 - Video Bus: device is a keyboard
[ 64.065] (II) event6 - Video Bus: device removed
[ 64.065] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input7/event6"
[ 64.065] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 64.065] (**) Option "xkb_layout" "fr"
[ 64.065] (**) Option "xkb_variant" "latin9"
[ 64.066] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 64.066] (II) event6 - Video Bus: device is a keyboard
[ 64.067] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 64.067] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 64.067] (**) Power Button: Applying InputClass "system-keyboard"
[ 64.067] (**) Power Button: Applying InputClass "Keyboard Layout"
[ 64.067] (II) Using input driver 'libinput' for 'Power Button'
[ 64.068] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[ 64.068] (**) Power Button: always reports core events
[ 64.068] (**) Option "Device" "/dev/input/event1"
[ 64.068] (**) Option "_source" "server/udev"
[ 64.069] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 64.069] (II) event1 - Power Button: device is a keyboard
[ 64.069] (II) event1 - Power Button: device removed
[ 64.069] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 64.069] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 64.069] (**) Option "xkb_layout" "fr"
[ 64.069] (**) Option "xkb_variant" "latin9"
[ 64.070] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 64.070] (II) event1 - Power Button: device is a keyboard
[ 64.071] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 64.071] (II) No input driver specified, ignoring this device.
[ 64.071] (II) This device may have been added with another device file.
[ 64.072] (II) config/udev: Adding input device WebCam SC-13HDL11431N: WebCam S (/dev/input/event11)
[ 64.072] (**) WebCam SC-13HDL11431N: WebCam S: Applying InputClass "libinput keyboard catchall"
[ 64.072] (**) WebCam SC-13HDL11431N: WebCam S: Applying InputClass "system-keyboard"
[ 64.072] (**) WebCam SC-13HDL11431N: WebCam S: Applying InputClass "Keyboard Layout"
[ 64.072] (II) Using input driver 'libinput' for 'WebCam SC-13HDL11431N: WebCam S'
[ 64.074] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 23 paused 0
[ 64.074] (**) WebCam SC-13HDL11431N: WebCam S: always reports core events
[ 64.074] (**) Option "Device" "/dev/input/event11"
[ 64.074] (**) Option "_source" "server/udev"
[ 64.075] (II) event11 - WebCam SC-13HDL11431N: WebCam S: is tagged by udev as: Keyboard
[ 64.075] (II) event11 - WebCam SC-13HDL11431N: WebCam S: device is a keyboard
[ 64.075] (II) event11 - WebCam SC-13HDL11431N: WebCam S: device removed
[ 64.075] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input12/event11"
[ 64.075] (II) XINPUT: Adding extended input device "WebCam SC-13HDL11431N: WebCam S" (type: KEYBOARD, id 10)
[ 64.075] (**) Option "xkb_layout" "fr"
[ 64.075] (**) Option "xkb_variant" "latin9"
[ 64.076] (II) event11 - WebCam SC-13HDL11431N: WebCam S: is tagged by udev as: Keyboard
[ 64.076] (II) event11 - WebCam SC-13HDL11431N: WebCam S: device is a keyboard
[ 64.076] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 64.076] (II) No input driver specified, ignoring this device.
[ 64.076] (II) This device may have been added with another device file.
[ 64.077] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 64.077] (II) No input driver specified, ignoring this device.
[ 64.077] (II) This device may have been added with another device file.
[ 64.077] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[ 64.077] (II) No input driver specified, ignoring this device.
[ 64.077] (II) This device may have been added with another device file.
[ 64.077] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 64.077] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 64.077] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 64.077] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Layout"
[ 64.077] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 64.079] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0
[ 64.079] (**) AT Translated Set 2 keyboard: always reports core events
[ 64.079] (**) Option "Device" "/dev/input/event3"
[ 64.079] (**) Option "_source" "server/udev"
[ 64.079] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 64.079] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 64.079] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 64.079] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 64.079] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 64.079] (**) Option "xkb_layout" "fr"
[ 64.079] (**) Option "xkb_variant" "latin9"
[ 64.080] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 64.080] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 64.080] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event5)
[ 64.080] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 64.080] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 64.080] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 64.080] (II) LoadModule: "synaptics"
[ 64.080] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 64.082] (II) Module synaptics: vendor="X.Org Foundation"
[ 64.082] compiled for 1.19.0, module version = 1.9.0
[ 64.082] Module class: X.Org XInput Driver
[ 64.082] ABI class: X.Org XInput driver, version 24.1
[ 64.082] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 64.084] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 25 paused 0
[ 64.084] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 64.084] (**) Option "Device" "/dev/input/event5"
[ 64.084] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 64.084] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 64.084] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2282 (res 32)
[ 64.084] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 64.084] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 64.084] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 64.084] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 64.084] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 64.084] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 64.084] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 64.084] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[ 64.084] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 64.084] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 64.084] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 64.084] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.050
[ 64.084] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 64.084] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 64.084] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 64.084] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 64.084] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 64.084] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 64.084] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 64.085] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 64.085] (II) No input driver specified, ignoring this device.
[ 64.085] (II) This device may have been added with another device file.
[ 64.457] (II) intel(0): EDID vendor "SEC", prod id 12619
[ 64.457] (II) intel(0): Printing DDC gathered Modelines:
[ 64.457] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)Ah, I don't use kernel parameters like nomodeset.
I also already tried to enable early KMS but remove it when I see no effect on that issue.
Offline
#4 2018-06-01 11:19:15
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,982
Re: AMD discrete GPU stop working
[ 0.043415] core: PEBS disabled due to CPU errata, please upgrade microcodeIt may not have to do with the amd gpu issue, but does show there are problems with your cpu that can only be solved by bios or microcode updates.
please configure you bootloader to apply intel microcde updates, see https://wiki.archlinux.org/index.php/Microcode .
After solving that and rebooting, post journal again.
If the issue with amd gpu is still present, try booting with another kernel , like linux-lts and post journal from that boot also.
Last edited by Lone_Wolf (2018-06-01 11:20:15)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#5 2018-06-01 11:52:53
- Aloha
- Member
- Registered: 2018-05-31
- Posts: 8
Re: AMD discrete GPU stop working
After microcode update:
[ 0.000000] microcode: microcode updated early to revision 0x2d, date = 2018-02-07
[ 0.000000] Linux version 4.16.12-1-ARCH (builduser@heftig-2435) (gcc version 8.1.0 (GCC)) #1 SMP PREEMPT Fri May 25 23:30:31 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root rw cryptdevice=/dev/vglvm/root:root quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009abeefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009abef000-0x000000009aceefff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009acef000-0x000000009ae3dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ae3e000-0x000000009ae4efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009ae4f000-0x000000009aeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aeef000-0x000000009af9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009af9f000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.00 by Phoenix Technologies Ltd.
[ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aede000
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B/700Z3A/700Z4A/700Z5A/700Z5B, BIOS 11FD 02/10/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 09B000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 240000000 mask FE0000000 write-back
[ 0.000000] 8 base 25FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x46655000, 0x46655fff] PGTABLE
[ 0.000000] BRK [0x46656000, 0x46656fff] PGTABLE
[ 0.000000] BRK [0x46657000, 0x46657fff] PGTABLE
[ 0.000000] BRK [0x46658000, 0x46658fff] PGTABLE
[ 0.000000] BRK [0x46659000, 0x46659fff] PGTABLE
[ 0.000000] BRK [0x4665a000, 0x4665afff] PGTABLE
[ 0.000000] BRK [0x4665b000, 0x4665bfff] PGTABLE
[ 0.000000] BRK [0x4665c000, 0x4665cfff] PGTABLE
[ 0.000000] BRK [0x4665d000, 0x4665dfff] PGTABLE
[ 0.000000] BRK [0x4665e000, 0x4665efff] PGTABLE
[ 0.000000] BRK [0x4665f000, 0x4665ffff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x3464a000-0x3631cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009AFFE014 000024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 0x000000009AFFE120 00009C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x000000009AFEF000 0000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x000000009AFF2000 0080BA (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 0x000000009AF37000 000040
[ 0.000000] ACPI: FACS 0x000000009AF37000 000040
[ 0.000000] ACPI: SLIC 0x000000009AFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 0x000000009AFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 0x000000009AFF1000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 0x000000009AFEE000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 0x000000009AFED000 000098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x000000009AFEC000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: TCPA 0x000000009AFEB000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: SSDT 0x000000009AFEA000 00094E (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000009AFE9000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000009AFE8000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x000000009AFE7000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000009AFE6000 000D97 (v01 SgRef SgTabl 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000009AFE5000 000A15 (v01 AmdRef AmdTabl 00001000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000009AFE4000 00021A (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25fdf9000-0x25fdfcfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009abeefff]
[ 0.000000] node 0: [mem 0x000000009afff000-0x000000009affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025fdfffff]
[ 0.000000] On node 0 totalpages: 2075022
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 158 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9840 pages used for memmap
[ 0.000000] DMA32 zone: 629744 pages, LIFO batch:31
[ 0.000000] Normal zone: 22520 pages used for memmap
[ 0.000000] Normal zone: 1441280 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0x9ba00000-0x9f9fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9abef000-0x9aceefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9acef000-0x9ae3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ae3e000-0x9ae4efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ae4f000-0x9aeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aeef000-0x9af9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9af9f000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9b9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ba00000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xf80f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xf80f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x4da with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2042440
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root rw cryptdevice=/dev/vglvm/root:root quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7988304K/8300088K available (10252K kernel code, 1261K rwdata, 3408K rodata, 1460K init, 640K bss, 311784K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 31755 entries in 125 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.016666] tsc: Fast TSC calibration using PIT
[ 0.019999] tsc: Detected 2194.980 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa3aca957d, max_idle_ns: 440795234816 ns
[ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.87 BogoMIPS (lpj=7316600)
[ 0.019999] pid_max: default: 32768 minimum: 301
[ 0.019999] Security Framework initialized
[ 0.019999] Yama: becoming mindful.
[ 0.023383] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023989] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024021] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024040] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024260] Disabled fast string operations
[ 0.024264] CPU: Physical Processor ID: 0
[ 0.024264] CPU: Processor Core ID: 0
[ 0.024270] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024270] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024275] mce: CPU supports 9 MCE banks
[ 0.024283] CPU0: Thermal monitoring enabled (TM1)
[ 0.024294] process: using mwait in idle threads
[ 0.024297] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.024298] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.024299] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024300] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.024301] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.024301] Speculative Store Bypass: Vulnerable
[ 0.024403] Freeing SMP alternatives memory: 24K
[ 0.028700] TSC deadline timer enabled
[ 0.028704] smpboot: CPU0: Intel(R) Core(TM) i7-2675QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.040022] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.040086] ... version: 3
[ 0.040088] ... bit width: 48
[ 0.040090] ... generic registers: 4
[ 0.040093] ... value mask: 0000ffffffffffff
[ 0.040094] ... max period: 00007fffffffffff
[ 0.040096] ... fixed-purpose events: 3
[ 0.040098] ... event mask: 000000070000000f
[ 0.046677] Hierarchical SRCU implementation.
[ 0.067008] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.073343] smp: Bringing up secondary CPUs ...
[ 0.103369] x86: Booting SMP configuration:
[ 0.103373] .... node #0, CPUs: #1
[ 0.003333] Disabled fast string operations
[ 0.136710] #2
[ 0.003333] Disabled fast string operations
[ 0.170042] #3
[ 0.003333] Disabled fast string operations
[ 0.200037] #4
[ 0.003333] Disabled fast string operations
[ 0.233368] #5
[ 0.003333] Disabled fast string operations
[ 0.263373] #6
[ 0.003333] Disabled fast string operations
[ 0.296708] #7
[ 0.003333] Disabled fast string operations
[ 0.299598] smp: Brought up 1 node, 8 CPUs
[ 0.299598] smpboot: Max logical packages: 1
[ 0.299598] smpboot: Total of 8 processors activated (35133.00 BogoMIPS)
[ 0.300404] devtmpfs: initialized
[ 0.300404] x86/mm: Memory block size: 128MB
[ 0.300792] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.300792] PM: Registering ACPI NVS region [mem 0x9ae3e000-0x9ae4efff] (69632 bytes)
[ 0.300792] PM: Registering ACPI NVS region [mem 0x9aeef000-0x9af9efff] (720896 bytes)
[ 0.300792] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.300792] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.300792] pinctrl core: initialized pinctrl subsystem
[ 0.300792] RTC time: 11:30:00, date: 06/01/18
[ 0.300792] NET: Registered protocol family 16
[ 0.300792] cpuidle: using governor ladder
[ 0.306688] cpuidle: using governor menu
[ 0.306774] ACPI: bus type PCI registered
[ 0.306776] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.306870] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.306878] PCI: not using MMCONFIG
[ 0.306878] PCI: Using configuration type 1 for base access
[ 0.306882] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.307823] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.307823] ACPI: Added _OSI(Module Device)
[ 0.307823] ACPI: Added _OSI(Processor Device)
[ 0.307823] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.307823] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.307823] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.313374] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.314117] ACPI: Dynamic OEM Table Load:
[ 0.314117] ACPI: SSDT 0xFFFFA27895D1A800 000670 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.317092] ACPI: Dynamic OEM Table Load:
[ 0.317099] ACPI: SSDT 0xFFFFA2789584E400 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.317396] ACPI: Dynamic OEM Table Load:
[ 0.317396] ACPI: SSDT 0xFFFFA27895FBA200 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.318286] ACPI: EC: EC started
[ 0.318286] ACPI: EC: interrupt blocked
[ 0.319340] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[ 0.319343] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.319344] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[ 0.319345] ACPI: Interpreter enabled
[ 0.319373] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.319374] ACPI: Using IOAPIC for interrupt routing
[ 0.319411] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.319978] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.319990] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.320316] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.334240] ACPI: Power Resource [FN00] (off)
[ 0.334361] ACPI: Power Resource [FN01] (off)
[ 0.334474] ACPI: Power Resource [FN02] (off)
[ 0.334587] ACPI: Power Resource [FN03] (off)
[ 0.334701] ACPI: Power Resource [FN04] (off)
[ 0.335707] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.335714] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.336021] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.336854] PCI host bridge to bus 0000:00
[ 0.336857] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.336859] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.336860] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.336862] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.336863] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.336865] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.336875] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.336992] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.337034] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.337143] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.337155] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.337161] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.337166] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.337179] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.337348] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.337386] pci 0000:00:16.0: reg 0x10: [mem 0xc0805000-0xc080500f 64bit]
[ 0.337496] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.337616] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.337648] pci 0000:00:1a.0: reg 0x10: [mem 0xc080a000-0xc080a3ff]
[ 0.337774] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.337883] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.337921] pci 0000:00:1b.0: reg 0x10: [mem 0xc0800000-0xc0803fff 64bit]
[ 0.338054] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.338174] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.338309] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.338428] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.338564] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.338679] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.338815] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.338936] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.338969] pci 0000:00:1d.0: reg 0x10: [mem 0xc0809000-0xc08093ff]
[ 0.339095] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.339200] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.339430] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.339463] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.339477] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.339490] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.339503] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.339517] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.339530] pci 0000:00:1f.2: reg 0x24: [mem 0xc0808000-0xc08087ff]
[ 0.339607] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.339708] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.339740] pci 0000:00:1f.3: reg 0x10: [mem 0xc0804000-0xc08040ff 64bit]
[ 0.339776] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.339960] pci 0000:01:00.0: [1002:6741] type 00 class 0x030000
[ 0.339983] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.339994] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc071ffff 64bit]
[ 0.340005] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.340019] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.340026] pci 0000:01:00.0: enabling Extended Tags
[ 0.340070] pci 0000:01:00.0: supports D1 D2
[ 0.350038] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.350045] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.350052] pci 0000:00:01.0: bridge window [mem 0xc0700000-0xc07fffff]
[ 0.350060] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.350241] pci 0000:02:00.0: [14e4:4357] type 00 class 0x028000
[ 0.350311] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc0603fff 64bit]
[ 0.350428] pci 0000:02:00.0: enabling Extended Tags
[ 0.350580] pci 0000:02:00.0: supports D1 D2
[ 0.350582] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.360094] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.360111] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff]
[ 0.360290] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.360426] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.360554] pci 0000:03:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[ 0.360633] pci 0000:03:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 0.361075] pci 0000:03:00.0: supports D1 D2
[ 0.361077] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.370113] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.370123] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.370147] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.370257] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.370321] pci 0000:04:00.0: reg 0x10: [mem 0xc0500000-0xc0507fff 64bit]
[ 0.370570] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.380065] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.380082] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.381279] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.381373] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.381465] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.381556] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.381647] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.381738] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.381829] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.381921] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.382612] ACPI: EC: interrupt unblocked
[ 0.382623] ACPI: EC: event unblocked
[ 0.382632] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.382634] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[ 0.382714] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.382714] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.382714] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.382714] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.382714] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.382714] vgaarb: loaded
[ 0.382714] EDAC MC: Ver: 3.0.0
[ 0.382714] Registered efivars operations
[ 0.398798] PCI: Using ACPI for IRQ routing
[ 0.401875] PCI: pci_cache_line_size set to 64 bytes
[ 0.401980] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.401981] e820: reserve RAM buffer [mem 0x9abef000-0x9bffffff]
[ 0.401983] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.401984] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
[ 0.402082] NetLabel: Initializing
[ 0.402083] NetLabel: domain hash size = 128
[ 0.402083] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.402097] NetLabel: unlabeled traffic allowed by default
[ 0.402101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.402101] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.404361] clocksource: Switched to clocksource tsc-early
[ 0.414620] VFS: Disk quotas dquot_6.6.0
[ 0.414639] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.414713] pnp: PnP ACPI init
[ 0.415251] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.415253] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.415255] system 00:00: [io 0x5000-0x5003] has been reserved
[ 0.415257] system 00:00: [io 0xffff] has been reserved
[ 0.415259] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.415260] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.415262] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.415264] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.415265] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.415267] system 00:00: [io 0x5000-0x500f] could not be reserved
[ 0.415274] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.415304] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.415376] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.415381] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.415416] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.415473] pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.415556] pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.415748] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.415750] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.415752] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.415753] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.415755] system 00:06: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.415757] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.415759] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.415760] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.415762] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.415764] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.415768] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.416374] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.416404] pnp: PnP ACPI: found 8 devices
[ 0.422317] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.422322] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.422368] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0720000-0xc073ffff pref]
[ 0.422371] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.422373] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.422376] pci 0000:00:01.0: bridge window [mem 0xc0700000-0xc07fffff]
[ 0.422378] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.422382] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.422389] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff]
[ 0.422402] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.422405] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.422416] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.422424] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.422431] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.422444] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.422446] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.422448] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.422449] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[ 0.422451] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.422452] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.422454] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff]
[ 0.422455] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.422457] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
[ 0.422459] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.422460] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.422462] pci_bus 0000:04: resource 1 [mem 0xc0500000-0xc05fffff]
[ 0.422583] NET: Registered protocol family 2
[ 0.422733] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.422771] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.422915] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.423049] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.423092] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.423121] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.423184] NET: Registered protocol family 1
[ 0.423198] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.423913] PCI: CLS 64 bytes, default 64
[ 0.423954] Unpacking initramfs...
[ 0.943646] Freeing initrd memory: 29516K
[ 0.943649] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.943652] software IO TLB [mem 0x8fe4d000-0x93e4d000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.943843] Scanning for low memory corruption every 60 seconds
[ 0.944427] Initialise system trusted keyrings
[ 0.944436] Key type blacklist registered
[ 0.944485] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.945723] zbud: loaded
[ 0.947041] Key type asymmetric registered
[ 0.947043] Asymmetric key parser 'x509' registered
[ 0.947073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.947110] io scheduler noop registered
[ 0.947111] io scheduler deadline registered
[ 0.947153] io scheduler cfq registered (default)
[ 0.947154] io scheduler mq-deadline registered
[ 0.947155] io scheduler kyber registered
[ 0.947160] io scheduler bfq registered
[ 0.947989] efifb: probing for efifb
[ 0.948001] efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
[ 0.948003] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.948003] efifb: scrolling: redraw
[ 0.948005] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.949940] Console: switching to colour frame buffer device 128x48
[ 0.951796] fb0: EFI VGA frame buffer device
[ 0.951806] intel_idle: MWAIT substates: 0x21120
[ 0.951807] intel_idle: v0.4.1 model 0x2A
[ 0.952096] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.952161] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.952170] ACPI: Lid Switch [LID0]
[ 0.952206] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.952224] ACPI: Power Button [PWRB]
[ 0.952261] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.952274] ACPI: Power Button [PWRF]
[ 0.965455] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.965457] ACPI: Thermal Zone [TZ00] (69 C)
[ 0.965830] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.965832] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.966094] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.968312] intel_pstate: Intel P-state driver initializing
[ 0.969013] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.969723] NET: Registered protocol family 10
[ 0.981720] Segment Routing with IPv6
[ 0.981775] NET: Registered protocol family 17
[ 0.983408] RAS: Correctable Errors collector initialized.
[ 0.983535] microcode: sig=0x206a7, pf=0x10, revision=0x2d
[ 0.983843] microcode: Microcode Update Driver: v2.2.
[ 0.983868] sched_clock: Marking stable (983829327, 0)->(982667076, 1162251)
[ 0.984524] registered taskstats version 1
[ 0.984530] Loading compiled-in X.509 certificates
[ 0.984549] zswap: loaded using pool lzo/zbud
[ 0.987794] Key type big_key registered
[ 0.988543] Magic number: 6:716:528
[ 0.988658] hctosys: unable to open rtc device (rtc0)
[ 0.993830] Freeing unused kernel memory: 1460K
[ 0.993832] Write protecting the kernel read-only data: 16384k
[ 0.994572] Freeing unused kernel memory: 2016K
[ 0.996497] Freeing unused kernel memory: 688K
[ 1.096355] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[ 1.100268] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.100363] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.104837] bcma: bus0: Found chip with id 43225, rev 0x01 and package 0x0A
[ 1.104875] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 1.104906] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 1.104965] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 1.110051] ACPI: bus type USB registered
[ 1.110069] usbcore: registered new interface driver usbfs
[ 1.110075] usbcore: registered new interface driver hub
[ 1.110115] usbcore: registered new device driver usb
[ 1.111758] SCSI subsystem initialized
[ 1.111959] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.112071] cryptd: max_cpu_qlen set to 1000
[ 1.114160] ehci-pci: EHCI PCI platform driver
[ 1.114375] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.114381] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.114399] ehci-pci 0000:00:1a.0: debug port 2
[ 1.115535] AVX version of gcm_enc/dec engaged.
[ 1.115536] AES CTR mode by8 optimization enabled
[ 1.117617] bcma: bus0: Bus registered
[ 1.118146] libata version 3.00 loaded.
[ 1.118310] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.118340] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc080a000
[ 1.130048] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.130108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.130110] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.130111] usb usb1: Product: EHCI Host Controller
[ 1.130112] usb usb1: Manufacturer: Linux 4.16.12-1-ARCH ehci_hcd
[ 1.130113] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.130235] hub 1-0:1.0: USB hub found
[ 1.130242] hub 1-0:1.0: 2 ports detected
[ 1.130388] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.130394] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.152718] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.193450] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 1.193733] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.193734] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.193736] usb usb2: Product: xHCI Host Controller
[ 1.193737] usb usb2: Manufacturer: Linux 4.16.12-1-ARCH xhci-hcd
[ 1.193738] usb usb2: SerialNumber: 0000:04:00.0
[ 1.193871] hub 2-0:1.0: USB hub found
[ 1.193883] hub 2-0:1.0: 2 ports detected
[ 1.193986] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.193989] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 1.193991] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[ 1.194007] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.194034] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.194061] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.194062] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.194063] usb usb3: Product: xHCI Host Controller
[ 1.194064] usb usb3: Manufacturer: Linux 4.16.12-1-ARCH xhci-hcd
[ 1.194065] usb usb3: SerialNumber: 0000:04:00.0
[ 1.194197] hub 3-0:1.0: USB hub found
[ 1.194208] hub 3-0:1.0: 2 ports detected
[ 1.194323] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.194344] ehci-pci 0000:00:1d.0: debug port 2
[ 1.198265] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.198286] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0809000
[ 1.210031] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.210173] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.210178] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.210182] usb usb4: Product: EHCI Host Controller
[ 1.210186] usb usb4: Manufacturer: Linux 4.16.12-1-ARCH ehci_hcd
[ 1.210190] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.210564] hub 4-0:1.0: USB hub found
[ 1.210575] hub 4-0:1.0: 2 ports detected
[ 1.210848] ahci 0000:00:1f.2: version 3.0
[ 1.211139] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.221282] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[ 1.221287] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.260710] scsi host0: ahci
[ 1.260987] scsi host1: ahci
[ 1.261215] scsi host2: ahci
[ 1.261361] scsi host3: ahci
[ 1.261515] scsi host4: ahci
[ 1.261757] scsi host5: ahci
[ 1.261808] ata1: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808100 irq 32
[ 1.261811] ata2: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808180 irq 32
[ 1.261815] ata3: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808200 irq 32
[ 1.261818] ata4: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808280 irq 32
[ 1.261821] ata5: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808300 irq 32
[ 1.261822] ata6: DUMMY
[ 1.460071] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.523408] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[ 1.540073] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.573874] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.575470] ata1.00: supports DRM functions and may not be fully accessible
[ 1.576002] ata1.00: NCQ Send/Recv Log not supported
[ 1.576009] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[ 1.576013] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.577430] ata1.00: supports DRM functions and may not be fully accessible
[ 1.577919] ata1.00: NCQ Send/Recv Log not supported
[ 1.578927] ata1.00: configured for UDMA/133
[ 1.589528] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.607537] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.607545] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.608140] hub 1-1:1.0: USB hub found
[ 1.608341] hub 1-1:1.0: 6 ports detected
[ 1.669625] usb 2-2: New USB device found, idVendor=18d1, idProduct=4ee7
[ 1.669633] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.669637] usb 2-2: Product: Nexus 5X
[ 1.669641] usb 2-2: Manufacturer: LGE
[ 1.669645] usb 2-2: SerialNumber: 02715110dfd824a7
[ 1.687087] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.687094] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.687623] hub 4-1:1.0: USB hub found
[ 1.687786] hub 4-1:1.0: 6 ports detected
[ 1.886783] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.904326] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.905007] ata2.00: ATA-8: SanDisk iSSD P4 8GB, SSD 9.14, max UDMA/133
[ 1.905013] ata2.00: 15649200 sectors, multi 1: LBA48
[ 1.905933] ata2.00: configured for UDMA/133
[ 1.906669] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 9.14 PQ: 0 ANSI: 5
[ 1.946714] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[ 1.946735] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[ 1.946819] clocksource: Switched to clocksource tsc
[ 1.966771] usb 4-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.069200] usb 4-1.3: New USB device found, idVendor=0a5c, idProduct=219a
[ 2.069208] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.069213] usb 4-1.3: Product: Broadcom Bluetooth Device
[ 2.069217] usb 4-1.3: Manufacturer: Broadcom Corp
[ 2.069221] usb 4-1.3: SerialNumber: E0CA94AED612
[ 2.147332] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[ 2.147340] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.147345] usb 1-1.4: Product: WebCam SC-13HDL11431N
[ 2.147349] usb 1-1.4: Manufacturer: 123
[ 2.221284] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.223259] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A7AS, 1.00, max UDMA/100
[ 2.226051] ata3.00: configured for UDMA/100
[ 2.230881] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A7AS 1.00 PQ: 0 ANSI: 5
[ 2.597957] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.911282] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.922405] sd 1:0:0:0: [sdb] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 2.922441] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.922446] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.922488] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.922558] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.922611] sd 0:0:0:0: [sda] Write Protect is off
[ 2.922614] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.922695] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.926161] sdb:
[ 2.926381] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.927236] sda: sda1 sda2 sda3
[ 2.927902] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.927904] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.940308] random: fast init done
[ 2.945467] random: lvm: uninitialized urandom read (4 bytes read)
[ 2.968081] device-mapper: uevent: version 1.0.3
[ 2.968228] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 2.969564] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 2.969574] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.969767] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.969800] random: lvm: uninitialized urandom read (2 bytes read)
[ 8.125862] random: crng init done
[ 9.274685] NET: Registered protocol family 38
[ 9.714076] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 9.925017] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 9.940400] systemd[1]: Detected architecture x86-64.
[ 9.945779] systemd[1]: Set hostname to <boo>.
[ 10.051521] systemd[1]: Reached target Remote File Systems.
[ 10.056511] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 10.056591] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 10.058468] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 10.058534] systemd[1]: Listening on LVM2 poll daemon socket.
[ 10.058592] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 10.058685] systemd[1]: Listening on Journal Socket.
[ 10.070741] EXT4-fs (dm-4): re-mounted. Opts: discard
[ 10.140348] systemd-journald[363]: Received request to flush runtime journal from PID 1
[ 10.438778] ACPI: AC Adapter [ADP1] (on-line)
[ 10.457245] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 10.457283] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 10.457955] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.470359] ACPI: Battery Slot [BAT1] (battery present)
[ 10.541876] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180105/utaddress-247)
[ 10.541885] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.541888] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[ 10.541894] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180105/utaddress-247)
[ 10.541898] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.541899] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[ 10.541904] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180105/utaddress-247)
[ 10.541908] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.541909] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[ 10.541914] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180105/utaddress-247)
[ 10.541918] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.541919] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.542416] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.542427] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.542987] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 10.544684] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.545384] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x00000000a3fd58ca, e8:03:9a:9c:b1:b0, XID 0c900800 IRQ 33
[ 10.545387] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 10.546985] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 10.546987] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 10.546988] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 10.546989] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 10.553688] Linux agpgart interface v0.103
[ 10.563187] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 10.568335] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 10.580084] tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16)
[ 10.643402] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 10.643453] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 10.658122] tpm tpm0: A TPM error (7) occurred attempting get random
[ 10.687740] intel_rapl: Found RAPL domain package
[ 10.687742] intel_rapl: Found RAPL domain core
[ 10.687743] intel_rapl: Found RAPL domain uncore
[ 10.687751] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 10.723266] r8169 0000:03:00.0 net0: renamed from eth0
[ 10.743850] iTCO_vendor_support: vendor-support=0
[ 10.747373] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.747436] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 10.748268] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.760656] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 10.771729] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 10.772416] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 10.772419] cfg80211: failed to load regulatory.db
[ 10.798433] [drm] radeon kernel modesetting enabled.
[ 10.798459] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 10.798603] ATPX version 1, functions 0x00000031
[ 10.798766] checking generic (b0000000 300000) vs hw (a0000000 10000000)
[ 10.798823] radeon 0000:01:00.0: enabling device (0006 -> 0007)
[ 10.799432] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x144D:0xC0B3 0x00).
[ 10.834942] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[ 10.834944] fb: switching to inteldrmfb from EFI VGA
[ 10.834967] Console: switching to colour dummy device 80x25
[ 10.835064] [drm] Replacing VGA console driver
[ 10.859061] Adding 4194300k swap on /dev/mapper/swap. Priority:-2 extents:1 across:4194300k SSFS
[ 10.872827] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 10.872842] b43: probe of bcma0:1 failed with error -524
[ 10.872861] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 10.877882] media: Linux media interface: v0.10
[ 10.879418] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.879419] [drm] Driver supports precise vblank timestamp query.
[ 10.909095] vga_switcheroo: enabled
[ 10.909599] radeon 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 10.909604] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 10.914781] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 16
[ 10.928097] Linux video capture interface: v2.00
[ 10.947968] ATOM BIOS: Samsung
[ 10.948038] [drm] GPU not posted. posting now...
[ 10.952049] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 10.952053] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 10.952064] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 10.952065] [drm] RAM width 128bits DDR
[ 10.952127] [TTM] Zone kernel: Available graphics memory: 4041184 kiB
[ 10.952128] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 10.952130] [TTM] Initializing pool allocator
[ 10.952135] [TTM] Initializing DMA pool allocator
[ 10.952162] [drm] radeon: 1024M of VRAM memory ready
[ 10.952164] [drm] radeon: 1024M of GTT memory ready.
[ 10.952182] [drm] Loading TURKS Microcode
[ 11.015030] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.015361] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 497
[ 11.016468] brcmsmac bcma0:1 wifi0: renamed from wlan0
[ 11.061115] [drm] Internal thermal controller with fan control
[ 11.066062] [drm] radeon: dpm initialized
[ 11.066207] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[ 11.067543] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 11.068503] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 11.073853] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 11.073980] radeon 0000:01:00.0: WB enabled
[ 11.073984] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0000000032634936
[ 11.073987] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000f5d70f0b
[ 11.074735] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x000000009c6e18e6
[ 11.074738] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.074738] [drm] Driver supports precise vblank timestamp query.
[ 11.074740] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 11.074787] radeon 0000:01:00.0: radeon: using MSI.
[ 11.074833] [drm] radeon: irq initialized.
[ 11.085855] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[ 11.085859] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[ 11.085861] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[ 11.085950] input: WebCam SC-13HDL11431N: WebCam S as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7
[ 11.086041] usbcore: registered new interface driver uvcvideo
[ 11.086042] USB Video Class driver (1.1.1)
[ 11.093419] [drm] ring test on 0 succeeded in 2 usecs
[ 11.093432] [drm] ring test on 3 succeeded in 6 usecs
[ 11.445020] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f06)
[ 11.460689] psmouse serio1: elantech: Synaptics capabilities query result 0x21, 0x15, 0x0f.
[ 11.476349] psmouse serio1: elantech: Elan sample query result 0b, 06, 74
[ 11.553968] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 11.557243] mousedev: PS/2 mouse device common for all mice
[ 11.994968] EXT4-fs (dm-7): mounting with "discard" option, but the device does not support discard
[ 11.994972] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard
[ 12.273642] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 12.645212] IPv6: ADDRCONF(NETDEV_UP): net0: link is not ready
[ 12.801496] r8169 0000:03:00.0 net0: link down
[ 12.801573] IPv6: ADDRCONF(NETDEV_UP): net0: link is not ready
[ 12.804943] IPv6: ADDRCONF(NETDEV_UP): wifi0: link is not ready
[ 13.296590] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 14.319464] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 15.342324] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 16.365202] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 17.388064] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 18.410924] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 19.433785] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 20.456644] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 21.479516] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 21.499595] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!!
[ 21.499631] radeon 0000:01:00.0: failed initializing UVD (-1).
[ 22.506979] [drm:r600_ib_test [radeon]] *ERROR* radeon: fence wait timed out.
[ 22.507100] [drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed testing IB on GFX ring (-110).
[ 22.507187] [drm:radeon_device_init [radeon]] *ERROR* ib ring test failed (-110).
[ 22.515766] [drm] Radeon Display Connectors
[ 22.525911] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 22.526569] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 1
[ 22.526804] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 22.528777] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 24.387621] acpi device:2d: registered as cooling_device14
[ 24.387758] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input8
[ 24.391253] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 26.250867] acpi device:3a: registered as cooling_device15
[ 26.251140] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 26.251666] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 26.266774] fbcon: inteldrmfb (fb0) is primary device
[ 27.315467] Console: switching to colour frame buffer device 200x56
[ 27.341434] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 27.351155] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 27.357170] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 27.357264] radeon 0000:01:00.0: WB enabled
[ 27.357266] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0000000032634936
[ 27.357268] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000f5d70f0b
[ 27.358014] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x000000009c6e18e6
[ 27.374637] [drm] ring test on 0 succeeded in 2 usecs
[ 27.374649] [drm] ring test on 3 succeeded in 6 usecs
[ 27.398879] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker
[ 27.398882] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 27.398884] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 27.398885] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 27.398886] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 27.398887] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 27.398889] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 27.415074] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 27.415134] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 27.415186] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 28.562731] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 29.585619] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 30.608501] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 31.631381] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 32.654259] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 33.677138] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 34.700017] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 35.722896] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 36.745777] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 37.768667] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 37.788766] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!!
[ 37.788820] radeon 0000:01:00.0: failed initializing UVD (-1).
[ 38.800280] [drm:r600_ib_test [radeon]] *ERROR* radeon: fence wait timed out.
[ 38.800466] [drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed testing IB on GFX ring (-110).
[ 38.800618] [drm:radeon_resume_kms [radeon]] *ERROR* ib ring test failed (-110).
[ 44.684902] Bluetooth: Core ver 2.22
[ 44.684926] NET: Registered protocol family 31
[ 44.684927] Bluetooth: HCI device and connection manager initialized
[ 44.684931] Bluetooth: HCI socket layer initialized
[ 44.684934] Bluetooth: L2CAP socket layer initialized
[ 44.684940] Bluetooth: SCO socket layer initialized
[ 44.692720] usbcore: registered new interface driver btusb
[ 44.948043] fuse init (API version 7.26)
[ 53.708847] usb 2-2: USB disconnect, device number 2
[ 54.066788] usb 2-2: new high-speed USB device number 3 using xhci_hcd
[ 54.212604] usb 2-2: New USB device found, idVendor=18d1, idProduct=4ee4
[ 54.212613] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 54.212618] usb 2-2: Product: Nexus 5X
[ 54.212622] usb 2-2: Manufacturer: LGE
[ 54.212626] usb 2-2: SerialNumber: 02715110dfd824a7
[ 55.802730] usbcore: registered new interface driver cdc_ether
[ 55.805439] rndis_host 2-2:1.0 usb0: register 'rndis_host' at usb-0000:04:00.0-2, RNDIS device, 0a:00:71:56:24:f7
[ 55.805472] usbcore: registered new interface driver rndis_host
[ 58.588281] rndis_host 2-2:1.0 android0: renamed from usb0
[ 58.669033] IPv6: ADDRCONF(NETDEV_UP): android0: link is not readyBut errors are still there, so I installed linux-lts as you said.
With linux-lts:
[ 0.000000] microcode: microcode updated early to revision 0x2d, date = 2018-02-07
[ 0.000000] Linux version 4.14.47-1-lts (builduser@eworm) (gcc version 8.1.0 (GCC)) #1 SMP Wed May 30 21:09:23 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/root rw cryptdevice=/dev/vglvm/root:root quiet
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009abeefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009abef000-0x000000009aceefff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009acef000-0x000000009ae3dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ae3e000-0x000000009ae4efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009ae4f000-0x000000009aeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aeef000-0x000000009af9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009af9f000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.00 by Phoenix Technologies Ltd.
[ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aede000
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B/700Z3A/700Z4A/700Z5A/700Z5B, BIOS 11FD 02/10/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 09B000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 240000000 mask FE0000000 write-back
[ 0.000000] 8 base 25FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff89c4c0097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x1f463c000, 0x1f463cfff] PGTABLE
[ 0.000000] BRK [0x1f463d000, 0x1f463dfff] PGTABLE
[ 0.000000] BRK [0x1f463e000, 0x1f463efff] PGTABLE
[ 0.000000] BRK [0x1f463f000, 0x1f463ffff] PGTABLE
[ 0.000000] BRK [0x1f4640000, 0x1f4640fff] PGTABLE
[ 0.000000] BRK [0x1f4641000, 0x1f4641fff] PGTABLE
[ 0.000000] BRK [0x1f4642000, 0x1f4642fff] PGTABLE
[ 0.000000] BRK [0x1f4643000, 0x1f4643fff] PGTABLE
[ 0.000000] BRK [0x1f4644000, 0x1f4644fff] PGTABLE
[ 0.000000] BRK [0x1f4645000, 0x1f4645fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x34770000-0x363affff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009AFFE014 000024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 0x000000009AFFE120 00009C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x000000009AFEF000 0000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x000000009AFF2000 0080BA (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 0x000000009AF37000 000040
[ 0.000000] ACPI: FACS 0x000000009AF37000 000040
[ 0.000000] ACPI: SLIC 0x000000009AFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 0x000000009AFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 0x000000009AFF1000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 0x000000009AFEE000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 0x000000009AFED000 000098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x000000009AFEC000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: TCPA 0x000000009AFEB000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: SSDT 0x000000009AFEA000 00094E (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000009AFE9000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000009AFE8000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x000000009AFE7000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000009AFE6000 000D97 (v01 SgRef SgTabl 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000009AFE5000 000A15 (v01 AmdRef AmdTabl 00001000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000009AFE4000 00021A (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25fdf8000-0x25fdfbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009abeefff]
[ 0.000000] node 0: [mem 0x000000009afff000-0x000000009affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025fdfffff]
[ 0.000000] On node 0 totalpages: 2075022
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 158 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9840 pages used for memmap
[ 0.000000] DMA32 zone: 629744 pages, LIFO batch:31
[ 0.000000] Normal zone: 22520 pages used for memmap
[ 0.000000] Normal zone: 1441280 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9abef000-0x9aceefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9acef000-0x9ae3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ae3e000-0x9ae4efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ae4f000-0x9aeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aeef000-0x9af9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9af9f000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9b9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ba00000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xf80f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xf80f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x4cc with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff89c71fa00000 s132504 r8192 d31336 u262144
[ 0.000000] pcpu-alloc: s132504 r8192 d31336 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2042440
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/root rw cryptdevice=/dev/vglvm/root:root quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7989076K/8300088K available (10252K kernel code, 1149K rwdata, 2828K rodata, 1412K init, 988K bss, 311012K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 29111 entries in 114 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.010000] tsc: Detected 2194.964 MHz processor
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.92 BogoMIPS (lpj=21949640)
[ 0.010000] pid_max: default: 32768 minimum: 301
[ 0.010000] ACPI: Core revision 20170728
[ 0.020444] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.021017] Security Framework initialized
[ 0.021018] Yama: becoming mindful.
[ 0.022120] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.022681] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.022707] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.022726] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.022931] Disabled fast string operations
[ 0.022935] CPU: Physical Processor ID: 0
[ 0.022935] CPU: Processor Core ID: 0
[ 0.022941] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.022941] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.022945] mce: CPU supports 9 MCE banks
[ 0.022954] CPU0: Thermal monitoring enabled (TM1)
[ 0.022965] process: using mwait in idle threads
[ 0.022967] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.022968] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.022970] Spectre V2 : Mitigation: Full generic retpoline
[ 0.022971] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.022971] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.022972] Speculative Store Bypass: Vulnerable
[ 0.023069] Freeing SMP alternatives memory: 28K
[ 0.031690] smpboot: Max logical packages: 2
[ 0.031769] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.032248] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.133000] TSC deadline timer enabled
[ 0.133004] smpboot: CPU0: Intel(R) Core(TM) i7-2675QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.133068] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.133092] ... version: 3
[ 0.133092] ... bit width: 48
[ 0.133093] ... generic registers: 4
[ 0.133094] ... value mask: 0000ffffffffffff
[ 0.133094] ... max period: 00007fffffffffff
[ 0.133095] ... fixed-purpose events: 3
[ 0.133096] ... event mask: 000000070000000f
[ 0.133143] Hierarchical SRCU implementation.
[ 0.134037] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.134054] smp: Bringing up secondary CPUs ...
[ 0.134132] x86: Booting SMP configuration:
[ 0.134133] .... node #0, CPUs: #1
[ 0.010000] Disabled fast string operations
[ 0.137228] #2
[ 0.010000] Disabled fast string operations
[ 0.137228] #3
[ 0.010000] Disabled fast string operations
[ 0.140100] #4
[ 0.010000] Disabled fast string operations
[ 0.143163] #5
[ 0.010000] Disabled fast string operations
[ 0.143163] #6
[ 0.010000] Disabled fast string operations
[ 0.143163] #7
[ 0.010000] Disabled fast string operations
[ 0.150025] smp: Brought up 1 node, 8 CPUs
[ 0.150025] smpboot: Total of 8 processors activated (35119.42 BogoMIPS)
[ 0.157300] devtmpfs: initialized
[ 0.157300] x86/mm: Memory block size: 128MB
[ 0.157300] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.157300] PM: Registering ACPI NVS region [mem 0x9ae3e000-0x9ae4efff] (69632 bytes)
[ 0.157300] PM: Registering ACPI NVS region [mem 0x9aeef000-0x9af9efff] (720896 bytes)
[ 0.157332] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.157332] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.157332] pinctrl core: initialized pinctrl subsystem
[ 0.157332] RTC time: 11:44:38, date: 06/01/18
[ 0.157332] NET: Registered protocol family 16
[ 0.157332] cpuidle: using governor ladder
[ 0.157332] cpuidle: using governor menu
[ 0.157332] ACPI: bus type PCI registered
[ 0.157332] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.157332] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.157332] PCI: not using MMCONFIG
[ 0.157332] PCI: Using configuration type 1 for base access
[ 0.157332] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.160180] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.160181] ACPI: Added _OSI(Module Device)
[ 0.160181] ACPI: Added _OSI(Processor Device)
[ 0.160181] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.160181] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.160253] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.162163] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.162166] ACPI: Dynamic OEM Table Load:
[ 0.162166] ACPI: SSDT 0xFFFF89C715CC1000 000670 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.162166] ACPI: Dynamic OEM Table Load:
[ 0.162166] ACPI: SSDT 0xFFFF89C715FB3000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.162166] ACPI: Dynamic OEM Table Load:
[ 0.162166] ACPI: SSDT 0xFFFF89C715EE0000 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.162166] ACPI: EC: EC started
[ 0.162166] ACPI: EC: interrupt blocked
[ 0.163695] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[ 0.163698] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.163699] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[ 0.163700] ACPI: Interpreter enabled
[ 0.163724] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.163725] ACPI: Using IOAPIC for interrupt routing
[ 0.163749] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.164084] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.164095] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.164319] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.170764] ACPI: Power Resource [FN00] (off)
[ 0.170842] ACPI: Power Resource [FN01] (off)
[ 0.170916] ACPI: Power Resource [FN02] (off)
[ 0.170992] ACPI: Power Resource [FN03] (off)
[ 0.171065] ACPI: Power Resource [FN04] (off)
[ 0.171638] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.171643] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.171840] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.172303] PCI host bridge to bus 0000:00
[ 0.172305] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.172307] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.172309] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.172310] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.172311] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.172313] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.172322] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.172413] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.172450] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.172531] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.172543] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.172549] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.172553] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.172565] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.172695] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.172732] pci 0000:00:16.0: reg 0x10: [mem 0xc0805000-0xc080500f 64bit]
[ 0.172840] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.172934] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.172966] pci 0000:00:1a.0: reg 0x10: [mem 0xc080a000-0xc080a3ff]
[ 0.173089] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.173173] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.173211] pci 0000:00:1b.0: reg 0x10: [mem 0xc0800000-0xc0803fff 64bit]
[ 0.173341] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.173433] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.173564] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.173658] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.173788] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.173878] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.174008] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.174106] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.174138] pci 0000:00:1d.0: reg 0x10: [mem 0xc0809000-0xc08093ff]
[ 0.174262] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.174341] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.174547] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.174580] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.174593] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.174607] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.174620] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.174633] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.174646] pci 0000:00:1f.2: reg 0x24: [mem 0xc0808000-0xc08087ff]
[ 0.174721] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.174796] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.174828] pci 0000:00:1f.3: reg 0x10: [mem 0xc0804000-0xc08040ff 64bit]
[ 0.174863] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.175010] pci 0000:01:00.0: [1002:6741] type 00 class 0x030000
[ 0.175032] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.175043] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc071ffff 64bit]
[ 0.175050] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.175064] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.175070] pci 0000:01:00.0: enabling Extended Tags
[ 0.175110] pci 0000:01:00.0: supports D1 D2
[ 0.210034] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.210041] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.210047] pci 0000:00:01.0: bridge window [mem 0xc0700000-0xc07fffff]
[ 0.210055] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.210228] pci 0000:02:00.0: [14e4:4357] type 00 class 0x028000
[ 0.210297] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc0603fff 64bit]
[ 0.210414] pci 0000:02:00.0: enabling Extended Tags
[ 0.210564] pci 0000:02:00.0: supports D1 D2
[ 0.210565] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.240091] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.240106] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff]
[ 0.240276] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.240411] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.240540] pci 0000:03:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[ 0.240619] pci 0000:03:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 0.241046] pci 0000:03:00.0: supports D1 D2
[ 0.241048] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.270108] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.270118] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.270144] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.270248] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.270311] pci 0000:04:00.0: reg 0x10: [mem 0xc0500000-0xc0507fff 64bit]
[ 0.270551] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.300062] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.300077] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.300908] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.300963] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.301017] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.301069] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.301120] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.301172] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.301223] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.301275] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.301810] ACPI: EC: interrupt unblocked
[ 0.301819] ACPI: EC: event unblocked
[ 0.301828] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.301829] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[ 0.301897] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.301897] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.301897] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.301897] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.301897] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.301897] vgaarb: loaded
[ 0.301897] EDAC MC: Ver: 3.0.0
[ 0.301897] Registered efivars operations
[ 0.320013] PCI: Using ACPI for IRQ routing
[ 0.321349] PCI: pci_cache_line_size set to 64 bytes
[ 0.321447] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.321449] e820: reserve RAM buffer [mem 0x9abef000-0x9bffffff]
[ 0.321450] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.321451] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
[ 0.321533] NetLabel: Initializing
[ 0.321534] NetLabel: domain hash size = 128
[ 0.321534] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.321548] NetLabel: unlabeled traffic allowed by default
[ 0.321562] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.321562] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.330009] clocksource: Switched to clocksource hpet
[ 0.339796] VFS: Disk quotas dquot_6.6.0
[ 0.339818] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.339878] pnp: PnP ACPI init
[ 0.340346] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.340348] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.340350] system 00:00: [io 0x5000-0x5003] has been reserved
[ 0.340351] system 00:00: [io 0xffff] has been reserved
[ 0.340353] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.340355] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.340356] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.340358] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.340359] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.340361] system 00:00: [io 0x5000-0x500f] could not be reserved
[ 0.340367] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340394] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.340441] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.340445] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.340472] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.340513] pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.340567] pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.340683] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.340685] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.340687] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.340688] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.340690] system 00:06: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.340692] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.340694] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.340695] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.340697] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.340698] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.340703] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.341184] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.341204] pnp: PnP ACPI: found 8 devices
[ 0.347778] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.347784] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.347830] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0720000-0xc073ffff pref]
[ 0.347832] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.347834] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.347837] pci 0000:00:01.0: bridge window [mem 0xc0700000-0xc07fffff]
[ 0.347839] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.347843] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.347850] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff]
[ 0.347862] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.347865] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.347875] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.347884] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.347891] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.347903] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.347905] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.347907] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.347908] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[ 0.347910] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.347911] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.347913] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff]
[ 0.347914] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.347916] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
[ 0.347918] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.347919] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.347921] pci_bus 0000:04: resource 1 [mem 0xc0500000-0xc05fffff]
[ 0.348007] NET: Registered protocol family 2
[ 0.348164] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.348303] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.348441] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.348487] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.348515] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.348575] NET: Registered protocol family 1
[ 0.348589] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.349145] PCI: CLS 64 bytes, default 64
[ 0.349190] Unpacking initramfs...
[ 0.860488] Freeing initrd memory: 28928K
[ 0.860502] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.860505] software IO TLB [mem 0x8fe4d000-0x93e4d000] (64MB) mapped at [ffff89c54fe4d000-ffff89c553e4cfff]
[ 0.860871] Scanning for low memory corruption every 60 seconds
[ 0.861507] Initialise system trusted keyrings
[ 0.861515] Key type blacklist registered
[ 0.861579] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.862571] zbud: loaded
[ 0.864379] Key type asymmetric registered
[ 0.864405] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.864450] io scheduler noop registered
[ 0.864451] io scheduler deadline registered (default)
[ 0.864489] io scheduler cfq registered
[ 0.864490] io scheduler mq-deadline registered
[ 0.864490] io scheduler kyber registered
[ 0.864511] io scheduler bfq registered
[ 0.865167] efifb: probing for efifb
[ 0.865179] efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
[ 0.865180] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.865181] efifb: scrolling: redraw
[ 0.865183] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.867512] Console: switching to colour frame buffer device 128x48
[ 0.869750] fb0: EFI VGA frame buffer device
[ 0.869758] intel_idle: MWAIT substates: 0x21120
[ 0.869759] intel_idle: v0.4.1 model 0x2A
[ 0.870073] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.870772] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.871963] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.871996] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.872007] intel_pstate: Intel P-state driver initializing
[ 0.872768] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.872833] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.873412] NET: Registered protocol family 10
[ 0.885465] Segment Routing with IPv6
[ 0.885513] NET: Registered protocol family 17
[ 0.887364] RAS: Correctable Errors collector initialized.
[ 0.887437] microcode: sig=0x206a7, pf=0x10, revision=0x2d
[ 0.887885] microcode: Microcode Update Driver: v2.2.
[ 0.887912] sched_clock: Marking stable (887879252, 0)->(879381233, 8498019)
[ 0.888395] registered taskstats version 1
[ 0.888400] Loading compiled-in X.509 certificates
[ 0.888417] zswap: loaded using pool lzo/zbud
[ 0.891960] Key type big_key registered
[ 0.892653] Magic number: 6:922:730
[ 0.892857] rtc_cmos 00:01: setting system clock to 2018-06-01 11:44:39 UTC (1527853479)
[ 0.896693] Freeing unused kernel memory: 1412K
[ 0.896694] Write protecting the kernel read-only data: 16384k
[ 0.897248] Freeing unused kernel memory: 2016K
[ 0.899706] Freeing unused kernel memory: 1268K
[ 0.998012] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[ 1.000424] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.000430] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.008541] ACPI: bus type USB registered
[ 1.008564] usbcore: registered new interface driver usbfs
[ 1.008574] usbcore: registered new interface driver hub
[ 1.008623] usbcore: registered new device driver usb
[ 1.010321] SCSI subsystem initialized
[ 1.010708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.011129] ehci-pci: EHCI PCI platform driver
[ 1.011309] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.011317] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.011343] ehci-pci 0000:00:1a.0: debug port 2
[ 1.012349] AVX version of gcm_enc/dec engaged.
[ 1.012350] AES CTR mode by8 optimization enabled
[ 1.015256] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.015273] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc080a000
[ 1.016862] libata version 3.00 loaded.
[ 1.050123] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.051369] hub 1-0:1.0: USB hub found
[ 1.051446] hub 1-0:1.0: 2 ports detected
[ 1.052140] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.052156] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.059570] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.115279] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 1.116473] hub 2-0:1.0: USB hub found
[ 1.116536] hub 2-0:1.0: 2 ports detected
[ 1.117024] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.117029] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 1.117034] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[ 1.117061] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.117282] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.118071] hub 3-0:1.0: USB hub found
[ 1.118149] hub 3-0:1.0: 2 ports detected
[ 1.118642] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.118673] ehci-pci 0000:00:1d.0: debug port 2
[ 1.122613] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.122632] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0809000
[ 1.150150] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.151455] hub 4-0:1.0: USB hub found
[ 1.151544] hub 4-0:1.0: 2 ports detected
[ 1.152303] ahci 0000:00:1f.2: version 3.0
[ 1.152743] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.152840] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[ 1.152850] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.271664] scsi host0: ahci
[ 1.272287] scsi host1: ahci
[ 1.272818] scsi host2: ahci
[ 1.273413] scsi host3: ahci
[ 1.273884] scsi host4: ahci
[ 1.274367] scsi host5: ahci
[ 1.274485] ata1: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808100 irq 32
[ 1.274491] ata2: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808180 irq 32
[ 1.274496] ata3: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808200 irq 32
[ 1.274500] ata4: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808280 irq 32
[ 1.274505] ata5: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808300 irq 32
[ 1.274507] ata6: DUMMY
[ 1.420136] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.480141] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[ 1.520137] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.603008] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.604663] ata1.00: supports DRM functions and may not be fully accessible
[ 1.605212] ata1.00: NCQ Send/Recv Log not supported
[ 1.605217] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[ 1.605222] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.606860] ata1.00: supports DRM functions and may not be fully accessible
[ 1.607359] ata1.00: NCQ Send/Recv Log not supported
[ 1.608684] ata1.00: configured for UDMA/133
[ 1.609234] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.621136] hub 1-1:1.0: USB hub found
[ 1.622125] hub 1-1:1.0: 6 ports detected
[ 1.721571] hub 4-1:1.0: USB hub found
[ 1.721729] hub 4-1:1.0: 6 ports detected
[ 1.910109] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[ 1.910131] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[ 1.940155] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.942528] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.943117] ata2.00: ATA-8: SanDisk iSSD P4 8GB, SSD 9.14, max UDMA/133
[ 1.943123] ata2.00: 15649200 sectors, multi 1: LBA48
[ 1.943750] ata2.00: configured for UDMA/133
[ 1.944193] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 9.14 PQ: 0 ANSI: 5
[ 2.040143] usb 4-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.272862] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.274785] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A7AS, 1.00, max UDMA/100
[ 2.277620] ata3.00: configured for UDMA/100
[ 2.281504] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A7AS 1.00 PQ: 0 ANSI: 5
[ 2.683168] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.920576] clocksource: Switched to clocksource tsc
[ 3.012793] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.025195] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 3.025206] sd 1:0:0:0: [sdb] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 3.025211] sd 0:0:0:0: [sda] Write Protect is off
[ 3.025213] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.025221] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.025223] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.025239] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.025250] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.028116] sda: sda1 sda2 sda3
[ 3.028611] sd 0:0:0:0: [sda] supports TCG Opal
[ 3.028612] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.028622] sdb:
[ 3.028779] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.034672] random: fast init done
[ 3.045401] random: lvm: uninitialized urandom read (4 bytes read)
[ 3.060512] device-mapper: uevent: version 1.0.3
[ 3.060568] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 3.061497] random: lvm: uninitialized urandom read (2 bytes read)
[ 3.173196] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 3.173203] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.173593] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 11.593773] NET: Registered protocol family 38
[ 11.941178] random: cryptsetup: uninitialized urandom read (2 bytes read)
[ 12.009816] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 12.225673] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.233346] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 12.260679] systemd[1]: Detected architecture x86-64.
[ 12.265411] systemd[1]: Set hostname to <boo>.
[ 12.329614] random: crng init done
[ 12.365227] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 12.365399] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 12.366995] systemd[1]: Listening on Process Core Dump Socket.
[ 12.368171] systemd[1]: Created slice system-getty.slice.
[ 12.368238] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 12.368435] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.368507] systemd[1]: Listening on LVM2 poll daemon socket.
[ 12.391966] EXT4-fs (dm-4): re-mounted. Opts: discard
[ 12.440064] systemd-journald[351]: Received request to flush runtime journal from PID 1
[ 12.741344] ACPI: AC Adapter [ADP1] (on-line)
[ 12.741462] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 12.741489] ACPI: Lid Switch [LID0]
[ 12.741525] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 12.741549] ACPI: Power Button [PWRB]
[ 12.741589] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 12.741620] ACPI: Power Button [PWRF]
[ 12.757077] ACPI: Battery Slot [BAT1] (battery present)
[ 12.763475] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.764272] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 12.765381] thermal LNXTHERM:00: registered as thermal_zone0
[ 12.765383] ACPI: Thermal Zone [TZ00] (81 C)
[ 12.765773] thermal LNXTHERM:01: registered as thermal_zone1
[ 12.765775] ACPI: Thermal Zone [TZ01] (30 C)
[ 12.769250] Linux agpgart interface v0.103
[ 12.778220] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[ 12.778228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.778232] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[ 12.778237] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
[ 12.778242] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.778243] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[ 12.778247] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
[ 12.778251] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.778252] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[ 12.778256] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
[ 12.778260] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.778261] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.779677] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 12.784557] bcma: bus0: Found chip with id 43225, rev 0x01 and package 0x0A
[ 12.784595] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 12.784625] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 12.784691] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 12.790039] tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16)
[ 12.792075] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 12.792085] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 12.792741] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffff97d340e29000, e8:03:9a:9c:b1:b0, XID 0c900800 IRQ 34
[ 12.792744] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 12.805670] bcma: bus0: Bus registered
[ 12.807760] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 12.809063] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 12.809065] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 12.809066] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 12.809066] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 12.902522] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 12.902564] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 12.961355] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 12.963145] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 12.991215] r8169 0000:03:00.0 net0: renamed from eth0
[ 13.134790] iTCO_vendor_support: vendor-support=0
[ 13.162603] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.162651] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 13.163522] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.182356] Bluetooth: Core ver 2.22
[ 13.182377] NET: Registered protocol family 31
[ 13.182378] Bluetooth: HCI device and connection manager initialized
[ 13.182382] Bluetooth: HCI socket layer initialized
[ 13.182385] Bluetooth: L2CAP socket layer initialized
[ 13.182390] Bluetooth: SCO socket layer initialized
[ 13.205221] usbcore: registered new interface driver btusb
[ 13.350300] intel_rapl: Found RAPL domain package
[ 13.350302] intel_rapl: Found RAPL domain core
[ 13.350303] intel_rapl: Found RAPL domain uncore
[ 13.350308] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 13.455265] [drm] radeon kernel modesetting enabled.
[ 13.455284] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 13.455360] ATPX version 1, functions 0x00000031
[ 13.475912] Adding 4194300k swap on /dev/mapper/swap. Priority:-2 extents:1 across:4194300k SSFS
[ 13.477403] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 13.477405] AMD IOMMUv2 functionality not available on this system
[ 13.480379] [drm] Memory usable by graphics device = 2048M
[ 13.480382] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[ 13.480383] fb: switching to inteldrmfb from EFI VGA
[ 13.480406] Console: switching to colour dummy device 80x25
[ 13.480485] [drm] Replacing VGA console driver
[ 13.486238] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.486239] [drm] Driver supports precise vblank timestamp query.
[ 13.488334] CRAT table not found
[ 13.488336] Finished initializing topology ret=0
[ 13.488353] kfd kfd: Initialized module
[ 13.488650] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 13.488652] radeon 0000:01:00.0: enabling device (0006 -> 0007)
[ 13.488800] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x144D:0xC0B3 0x00).
[ 13.488818] vga_switcheroo: enabled
[ 13.533280] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 13.533290] b43: probe of bcma0:1 failed with error -524
[ 13.533303] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 13.559625] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 16
[ 13.563684] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.563903] ATOM BIOS: Samsung
[ 13.563949] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 497
[ 13.563983] [drm] GPU not posted. posting now...
[ 13.564834] brcmsmac bcma0:1 wifi0: renamed from wlan0
[ 13.567760] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 13.567762] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 13.567768] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 13.567769] [drm] RAM width 128bits DDR
[ 13.567817] [TTM] Zone kernel: Available graphics memory: 4041544 kiB
[ 13.567818] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 13.567819] [TTM] Initializing pool allocator
[ 13.567822] [TTM] Initializing DMA pool allocator
[ 13.567838] [drm] radeon: 1024M of VRAM memory ready
[ 13.567839] [drm] radeon: 1024M of GTT memory ready.
[ 13.567849] [drm] Loading TURKS Microcode
[ 13.571337] [drm] Internal thermal controller with fan control
[ 13.576226] [drm] radeon: dpm initialized
[ 13.578005] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 13.578611] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 13.583651] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 13.583767] radeon 0000:01:00.0: WB enabled
[ 13.583769] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff89c6fa811c00
[ 13.583771] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff89c6fa811c0c
[ 13.584527] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffff97d341c32118
[ 13.584530] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.584530] [drm] Driver supports precise vblank timestamp query.
[ 13.584532] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 13.584576] radeon 0000:01:00.0: radeon: using MSI.
[ 13.584620] [drm] radeon: irq initialized.
[ 13.601320] [drm] ring test on 0 succeeded in 2 usecs
[ 13.601332] [drm] ring test on 3 succeeded in 6 usecs
[ 13.719321] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f06)
[ 13.734585] psmouse serio1: elantech: Synaptics capabilities query result 0x21, 0x15, 0x0f.
[ 13.750224] psmouse serio1: elantech: Elan sample query result 0b, 06, 74
[ 13.826754] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 13.829135] mousedev: PS/2 mouse device common for all mice
[ 14.224495] EXT4-fs (dm-7): mounting with "discard" option, but the device does not support discard
[ 14.224498] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard
[ 14.781514] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 15.804389] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 16.827250] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 17.850120] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 18.872981] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 19.895844] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 20.918698] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 21.941575] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 22.964444] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 23.987320] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 24.007397] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!!
[ 24.007434] radeon 0000:01:00.0: failed initializing UVD (-1).
[ 24.714827] IPv6: ADDRCONF(NETDEV_UP): net0: link is not ready
[ 24.891566] r8169 0000:03:00.0 net0: link down
[ 24.891734] IPv6: ADDRCONF(NETDEV_UP): net0: link is not ready
[ 24.902311] IPv6: ADDRCONF(NETDEV_UP): wifi0: link is not ready
[ 25.030276] [drm:r600_ib_test [radeon]] *ERROR* radeon: fence wait timed out.
[ 25.030369] [drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed testing IB on GFX ring (-110).
[ 25.030439] [drm:radeon_device_init [radeon]] *ERROR* ib ring test failed (-110).
[ 25.036884] [drm] Radeon Display Connectors
[ 25.062655] kfd kfd: DID 6741 is missing in supported_devices
[ 25.062660] kfd kfd: kgd2kfd_probe failed
[ 25.062707] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[ 25.064669] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ 25.065007] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 25.067517] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 30.640750] acpi device:2d: registered as cooling_device14
[ 30.640867] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input7
[ 30.642464] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 36.220713] acpi device:3a: registered as cooling_device15
[ 36.220930] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 36.221396] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 36.236287] fbcon: inteldrmfb (fb0) is primary device
[ 36.744096] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 36.749982] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 36.750088] radeon 0000:01:00.0: WB enabled
[ 36.750090] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff89c6fa811c00
[ 36.750091] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff89c6fa811c0c
[ 36.750838] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffff97d341c32118
[ 36.767266] [drm] ring test on 0 succeeded in 3 usecs
[ 36.767275] [drm] ring test on 3 succeeded in 6 usecs
[ 37.294778] Console: switching to colour frame buffer device 200x56
[ 37.314389] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 37.947377] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 38.970272] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 39.993150] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 41.016028] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 42.038914] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 43.061810] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 44.084690] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 45.107569] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 46.130466] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 47.153344] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 47.173443] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!!
[ 47.173496] radeon 0000:01:00.0: failed initializing UVD (-1).
[ 47.301617] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker
[ 47.301620] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 47.301621] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 47.301622] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 47.301623] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 47.301625] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 47.301626] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 47.321694] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 47.321766] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 47.321841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 48.230290] [drm:r600_ib_test [radeon]] *ERROR* radeon: fence wait timed out.
[ 48.230479] [drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed testing IB on GFX ring (-110).
[ 48.230642] [drm:radeon_resume_kms [radeon]] *ERROR* ib ring test failed (-110).
[ 54.215729] media: Linux media interface: v0.10
[ 54.237210] Linux video capture interface: v2.00
[ 54.258895] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[ 54.278439] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[ 54.278442] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[ 54.278444] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[ 54.278625] input: WebCam SC-13HDL11431N: WebCam S as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
[ 54.278768] usbcore: registered new interface driver uvcvideo
[ 54.278769] USB Video Class driver (1.1.1)
[ 57.609896] usb 2-2: USB disconnect, device number 2
[ 58.060141] usb 2-2: new high-speed USB device number 3 using xhci_hcd
[ 59.782356] usbcore: registered new interface driver cdc_ether
[ 59.784929] rndis_host 2-2:1.0 usb0: register 'rndis_host' at usb-0000:04:00.0-2, RNDIS device, a2:71:fb:d9:8a:a4
[ 59.784957] usbcore: registered new interface driver rndis_host
[ 62.603004] rndis_host 2-2:1.0 android0: renamed from usb0
[ 62.714558] IPv6: ADDRCONF(NETDEV_UP): android0: link is not ready
[ 66.753258] fuse init (API version 7.26)Same errors again :-(
And with linux-lts, my computer freezes and crashes in the same way when I use DRI_PRIME=1.
Last edited by Aloha (2018-06-01 11:56:16)
Offline
#6 2018-06-01 12:08:45
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,982
Re: AMD discrete GPU stop working
So it doesn't look like a kernel issue.
Did the errors appear before may 17 ?
Check your pacman.log, did you upgrade to xorg-server 1.20.0-2 before or after the errors started ?
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#7 2018-06-01 13:08:02
- Aloha
- Member
- Registered: 2018-05-31
- Posts: 8
Re: AMD discrete GPU stop working
Issue started on may 30, after the upgrade of xorg-server 1.20.0-2 (did more than a week ago).
The same day (may 30), I upgraded my system (the last one before errors appear at next reboot):
[2018-05-30 15:39] [PACMAN] Running 'pacman --color auto -Sy'
[2018-05-30 15:39] [PACMAN] synchronizing package lists
[2018-05-30 15:54] [PACMAN] Running 'pacman --color auto -S -u'
[2018-05-30 15:54] [PACMAN] starting full system upgrade
[2018-05-30 15:56] [ALPM] transaction started
[2018-05-30 15:56] [ALPM] upgraded bind-tools (9.12.1.P2-1 -> 9.13.0-1)
[2018-05-30 15:56] [ALPM] upgraded lz4 (1:1.8.1.2-1 -> 1:1.8.2-2)
[2018-05-30 15:56] [ALPM] upgraded btrfs-progs (4.16-2 -> 4.16.1-2)
[2018-05-30 15:56] [ALPM] upgraded ca-certificates-mozilla (3.37-1 -> 3.37.1-1)
[2018-05-30 15:56] [ALPM] upgraded nss (3.37-1 -> 3.37.1-1)
[2018-05-30 15:56] [ALPM] upgraded x265 (2.7-1 -> 2.8-1)
[2018-05-30 15:56] [ALPM] upgraded kmod (24-1 -> 25-1)
[2018-05-30 15:56] [ALPM] upgraded libnftnl (1.0.9-1 -> 1.1.0-1)
[2018-05-30 15:56] [ALPM] upgraded lm_sensors (3.4.0-3 -> 3.4.0-4)
[2018-05-30 15:56] [ALPM] upgraded ffmpeg (1:4.0-2 -> 1:4.0-3)
[2018-05-30 15:56] [ALPM] upgraded chromium (66.0.3359.181-1 -> 67.0.3396.56-1)
[2018-05-30 15:56] [ALPM] upgraded cinnamon-translations (3.8.0-1 -> 3.8.1-1)
[2018-05-30 15:56] [ALPM] upgraded fftw (3.3.7-1 -> 3.3.8-1)
[2018-05-30 15:56] [ALPM] upgraded file (5.33-1 -> 5.33-3)
[2018-05-30 15:56] [ALPM] upgraded fuse-common (3.2.2-2 -> 3.2.3-1)
[2018-05-30 15:56] [ALPM] upgraded perl-error (0.17025-2 -> 0.17026-1)
[2018-05-30 15:56] [ALPM] upgraded libidn2 (2.0.4-2 -> 2.0.5-1)
[2018-05-30 15:56] [ALPM] upgraded git (2.17.0-1 -> 2.17.1-1)
[2018-05-30 15:56] [ALPM] upgraded ilmbase (2.2.1-1 -> 2.2.1-2)
[2018-05-30 15:56] [ALPM] upgraded gst-plugins-bad (1.14.1-1 -> 1.14.1-2)
[2018-05-30 15:56] [ALPM] upgraded libmagick (7.0.7.35-1 -> 7.0.7.36-1)
[2018-05-30 15:56] [ALPM] upgraded imagemagick (7.0.7.35-1 -> 7.0.7.36-1)
[2018-05-30 15:56] [ALPM] upgraded ldb (1.3.2-1 -> 1.3.3-1)
[2018-05-30 15:56] [ALPM] upgraded lib32-dbus (1.12.6-1 -> 1.12.8-1)
[2018-05-30 15:56] [ALPM] upgraded lib32-libdrm (2.4.91-3 -> 2.4.92-1)
[2018-05-30 15:56] [ALPM] upgraded lib32-wayland (1.14.0-1 -> 1.15.0-1)
[2018-05-30 15:56] [ALPM] upgraded lib32-mesa (18.0.4-1 -> 18.0.4-2)
[2018-05-30 15:56] [ALPM] upgraded libbytesize (1.2-1 -> 1.3-1)
[2018-05-30 15:56] [ALPM] upgraded libcue (2.2.0-1 -> 2.2.1-1)
[2018-05-30 15:56] [ALPM] upgraded libdazzle (3.28.1-1 -> 3.28.2-1)
[2018-05-30 15:56] [ALPM] upgraded libgphoto2 (2.5.17-1 -> 2.5.18-1)
[2018-05-30 15:56] [ALPM] upgraded libmagick6 (6.9.9.47-1 -> 6.9.9.48-1)
[2018-05-30 15:56] [ALPM] upgraded libwbclient (4.8.1-1 -> 4.8.2-1)
[2018-05-30 15:56] [ALPM] upgraded linux-firmware (20180507.8fc2d4e-1 -> 20180518.2a9b2cf-1)
[2018-05-30 15:56] [ALPM] upgraded linux (4.16.9-1 -> 4.16.12-1)
[2018-05-30 15:56] [ALPM] upgraded linux-headers (4.16.9-1 -> 4.16.12-1)
[2018-05-30 15:56] [ALPM] upgraded nm-connection-editor (1.8.11dev+12+ga37483c1-1 -> 1.8.12-2)
[2018-05-30 15:56] [ALPM] upgraded network-manager-applet (1.8.11dev+12+ga37483c1-1 -> 1.8.12-2)
[2018-05-30 15:56] [ALPM] upgraded nodejs (10.1.0-1 -> 10.3.0-1)
[2018-05-30 15:56] [ALPM] upgraded npm (6.0.1-1 -> 6.1.0-1)
[2018-05-30 15:56] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2018-05-30 15:56] [ALPM] upgraded pacman-mirrorlist (20180517-1 -> 20180524-1)
[2018-05-30 15:56] [ALPM] upgraded pacman (5.0.2-3 -> 5.1.0-1)
[2018-05-30 15:56] [ALPM] upgraded php (7.2.5-2 -> 7.2.6-1)
[2018-05-30 15:56] [ALPM] upgraded php-apache (7.2.5-2 -> 7.2.6-1)
[2018-05-30 15:56] [ALPM] upgraded php-cgi (7.2.5-2 -> 7.2.6-1)
[2018-05-30 15:56] [ALPM] upgraded qt5-base (5.10.1-8 -> 5.11.0-1)
[2018-05-30 15:56] [ALPM] upgraded pyqt5-common (5.10.1-2 -> 5.10.1-3)
[2018-05-30 15:56] [ALPM] upgraded python-pyqt5 (5.10.1-2 -> 5.10.1-3)
[2018-05-30 15:56] [ALPM] upgraded python2-pyqt5 (5.10.1-2 -> 5.10.1-3)
[2018-05-30 15:56] [ALPM] upgraded qt5-xmlpatterns (5.10.1-1 -> 5.11.0-1)
[2018-05-30 15:56] [ALPM] upgraded qt5-declarative (5.10.1-4 -> 5.11.0-1)
[2018-05-30 15:56] [ALPM] upgraded qt5-location (5.10.1-2 -> 5.11.0-1)
[2018-05-30 15:57] [ALPM] upgraded qt5-multimedia (5.10.1-1 -> 5.11.0-1)
[2018-05-30 15:57] [ALPM] upgraded qt5-quickcontrols (5.10.1-1 -> 5.11.0-1)
[2018-05-30 15:57] [ALPM] upgraded qt5-sensors (5.10.1-1 -> 5.11.0-1)
[2018-05-30 15:57] [ALPM] upgraded qt5-webchannel (5.10.1-1 -> 5.11.0-1)
[2018-05-30 15:57] [ALPM] upgraded qt5-webkit (5.212.0alpha2-14 -> 5.212.0alpha2-15)
[2018-05-30 15:57] [ALPM] upgraded qt5-x11extras (5.10.1-1 -> 5.11.0-1)
[2018-05-30 15:57] [ALPM] upgraded rubygems (2.7.6-1 -> 2.7.7-1)
[2018-05-30 15:57] [ALPM] upgraded ruby-dbus (0.14.1-1 -> 0.15.0-1)
[2018-05-30 15:57] [ALPM] upgraded ruby-rdoc (6.0.3-1 -> 6.0.4-1)
[2018-05-30 15:57] [ALPM] upgraded smbclient (4.8.1-1 -> 4.8.2-1)
[2018-05-30 15:57] [ALPM] warning: directory permissions differ on /var/lib/samba/private/
filesystem: 755 package: 700
[2018-05-30 15:57] [ALPM] upgraded samba (4.8.1-1 -> 4.8.2-1)
[2018-05-30 15:57] [ALPM] upgraded tilix (1.7.9-1 -> 1.8.1-1)
[2018-05-30 15:57] [ALPM] upgraded vim-runtime (8.0.1838-1 -> 8.1.0022-1)
[2018-05-30 15:57] [ALPM] upgraded vim (8.0.1838-1 -> 8.1.0022-1)
[2018-05-30 15:57] [ALPM] upgraded volume_key (0.3.9-5 -> 0.3.10-1)
[2018-05-30 15:57] [ALPM] upgraded wine (3.8-1 -> 3.9-1)
[2018-05-30 15:57] [ALPM] upgraded xfsprogs (4.15.1-1 -> 4.16.1-1)
[2018-05-30 15:57] [ALPM] transaction completed
[2018-05-30 15:57] [ALPM] running '60-linux.hook'...
[2018-05-30 15:57] [ALPM] running '90-linux.hook'...
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> Starting build: 4.16.12-1-ARCH
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> Image generation successful
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> Starting build: 4.16.12-1-ARCH
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
[2018-05-30 15:57] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
[2018-05-30 15:57] [ALPM-SCRIPTLET] ==> Image generation successful
[2018-05-30 15:57] [ALPM] running 'detect-old-perl-modules.hook'...
[2018-05-30 15:57] [ALPM] running 'glib-compile-schemas.hook'...
[2018-05-30 15:57] [ALPM] running 'gtk-update-icon-cache.hook'...
[2018-05-30 15:57] [ALPM] running 'systemd-binfmt.hook'...
[2018-05-30 15:57] [ALPM] running 'systemd-daemon-reload.hook'...
[2018-05-30 15:57] [ALPM] running 'systemd-hwdb.hook'...
[2018-05-30 15:57] [ALPM] running 'systemd-sysusers.hook'...
[2018-05-30 15:57] [ALPM] running 'systemd-tmpfiles.hook'...
[2018-05-30 15:57] [ALPM] running 'systemd-udev-reload.hook'...
[2018-05-30 15:57] [ALPM] running 'systemd-update.hook'...
[2018-05-30 15:57] [ALPM] running 'texinfo-install.hook'...
[2018-05-30 15:57] [ALPM] running 'update-ca-trust.hook'...
[2018-05-30 15:57] [ALPM] running 'update-desktop-database.hook'...I already tried to downgrade lib32-mesa and lib32-wayland, even if it's not related to radeon drivers (it's the only two related to graphics in my opinion), but nothing change.
I upgraded my system yesterday and today, some xorg packages appears but nothing change again:
[2018-05-31 14:42] [ALPM] upgraded xorg-fonts-alias (1.0.3-1 -> 1.0.3-2)
[2018-05-31 14:42] [ALPM] upgraded xorg-fonts-encodings (1.0.4-4 -> 1.0.4-5)
[2018-05-31 14:42] [ALPM] upgraded xorg-luit (1.1.1-2 -> 1.1.1-3)
[2018-05-31 14:42] [ALPM] upgraded xorg-xdpyinfo (1.3.2-1 -> 1.3.2-2)
[2018-05-31 14:42] [ALPM] upgraded xorg-xmodmap (1.0.9-1 -> 1.0.9-2)
...
[2018-06-01 13:39] [ALPM] upgraded xorg-server-common (1.20.0-2 -> 1.20.0-5)
[2018-06-01 13:39] [ALPM] upgraded xorg-server (1.20.0-2 -> 1.20.0-5)Last edited by Aloha (2018-06-01 13:20:35)
Offline
#8 2018-06-02 12:16:13
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,982
Re: AMD discrete GPU stop working
[2018-05-30 15:56] [ALPM] upgraded linux-firmware (20180507.8fc2d4e-1 -> 20180518.2a9b2cf-1)linux-firmware holds firmware updates for many devices, including video cards.
Try downgrading to the previous version, 20180507.8fc2d4e-1 .
---------------
[2018-05-30 15:39] [PACMAN] Running 'pacman --color auto -Sy'
[2018-05-30 15:39] [PACMAN] synchronizing package lists
[2018-05-30 15:54] [PACMAN] Running 'pacman --color auto -S -u'
[2018-05-30 15:54] [PACMAN] starting full system upgradeThose lines suggest you are not using pacman directly, but some kind of helper ?
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#9 2018-06-03 18:21:48
- Aloha
- Member
- Registered: 2018-05-31
- Posts: 8
Re: AMD discrete GPU stop working
Nothing change after downgrading linux-firmware to previous version :-(
And yes, I usually use yaourt on top of pacman most of the time.
Do you know if it's possible to see if it's an hardware issue with the GPU? I know it's still identified by the system but maybe just the display part of the GPU is broken?
Offline
#10 2018-06-03 19:17:34
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,945
Re: AMD discrete GPU stop working
Try to run a complete different system w/ an older software stack (some life ubuntu or whatever) and whether you get the same errors.
If not, try to downgrade xorg and/or get rid of xf86-video-ati (so use the modesetting driver)
Offline
#11 2018-06-04 15:06:53
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,982
Re: AMD discrete GPU stop working
From may 28 on i have had problems with radeon also, but with different errro messages and on a system with only a dedicated videocard (radeon HD 4970).
On june 1 i installed linux 4.16.13 and things appeared to improve (no more crashes, just time-outs ). Saturday night however the errors got much more frequent and the messages changed. Atleast 2 times my system froze completely and logs showed the same messages as aloha gets.
I investigated, expiremented and found a workaround : disable uvd .
The last 5 hours my system has been stable.
edit
After leaving the system idle for a few hours, the problems were back.
It seems disabling uvd support reduced the issues but not more.
Today the system had artifacts even in console mode, re-seating the card & power connectors didn't help.
I took it out and put another videocard in and all problems are gone.
The new card is a radeon HD 4350, so closely related to the faulty one.
Hardware failure.
Last edited by Lone_Wolf (2018-06-05 18:37:01)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#12 2018-06-06 00:26:56
- Aloha
- Member
- Registered: 2018-05-31
- Posts: 8
Re: AMD discrete GPU stop working
I tried to add kernel parameter to disable uvd and actually errors disappear but issue was still present with DRI_PRIME=1 commands.
I read your edit and that is what I was afraid of! :-(
As seth said, I will try to boot my computer on another system to confirm that is an hardware issue.
I will keep you inform of the result but anyway, thank's for your help! ;-)
Offline
Pages: 1