You are not logged in.
- Topics: Active | Unanswered
#1 2018-06-06 20:20:53
- kabads
- Member
- Registered: 2012-09-22
- Posts: 271
- Website
[Solved] X.org server now working, but super low resolution
X hasn't been working for the last couple of weeks due to driver issues with the latest version - however, it worked today at something like 640x480.
I've tried to reconfigure with arandr, but that only had 640x480 - so I followed the steps at [0] to add an undetected mode. However, I get
xrandr: Failed to get size of gamma for output default
xrandr: screen cannot be larger than 640x480 (desired size 1024x768)$ xrandr -d :0
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 640 x 480, maximum 640 x 480
default connected 640x480+0+0 0mm x 0mm
640x480 73.00*What else do I need to look for?
[0] https://wiki.archlinux.org/index.php/xr … esolutions
Last edited by kabads (2018-06-07 12:34:45)
Offline
#2 2018-06-06 20:32:20
- loqs
- Member
- Registered: 2014-03-06
- Posts: 19,113
Re: [Solved] X.org server now working, but super low resolution
Please post the commands you used instead of just their outputs. Also please provide details of the driver issue and your current configuration.
Offline
#3 2018-06-06 20:46:33
- kabads
- Member
- Registered: 2012-09-22
- Posts: 271
- Website
Re: [Solved] X.org server now working, but super low resolution
cvt 1024 768
# 1024x768 59.92 Hz (CVT 0.79M3) hsync: 47.82 kHz; pclk: 63.50 MHz
Modeline "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsyncxrandr --newmode "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
xrandr: Failed to get size of gamma for output default
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
Serial number of failed request: 19
Current serial number in output stream: 19xrandr --addmode default 1280x1024_60.00
xrandr: Failed to get size of gamma for output defaultthen:
$ xrandr --output default --mode 1024x768_60.00
xrandr: Failed to get size of gamma for output default
xrandr: Configure crtc 0 failedI'm running nvidia-340xx-lts and there were some compatibility issues with X.org-server 1.20.
I'm not sure of any other details of the configuration.
Offline
#4 2018-06-06 20:57:21
- loqs
- Member
- Registered: 2014-03-06
- Posts: 19,113
Re: [Solved] X.org server now working, but super low resolution
The contents of Xorg.log and any configuration files you have created for X and the output of dmesg please.
Offline
#5 2018-06-06 21:04:58
- kabads
- Member
- Registered: 2012-09-22
- Posts: 271
- Website
Re: [Solved] X.org server now working, but super low resolution
Xorg.0.log:
[ 2445.707] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 2445.719]
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[ 2445.753] Build Operating System: Linux Arch Linux
[ 2445.777] Current Operating System: Linux spark 4.14.47-1-lts #1 SMP Wed May 30 21:09:23 UTC 2018 x86_64
[ 2445.778] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=066691f6-14a0-4bfb-95aa-32b16d1ceee7 rw quiet
[ 2445.814] Build Date: 25 May 2018 10:26:33PM
[ 2445.826]
[ 2445.837] Current version of pixman: 0.34.0
[ 2445.861] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2445.861] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2445.911] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 6 21:03:36 2018
[ 2445.923] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2445.935] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2445.936] (==) No Layout section. Using the first Screen section.
[ 2445.936] (==) No screen section available. Using defaults.
[ 2445.936] (**) |-->Screen "Default Screen Section" (0)
[ 2445.936] (**) | |-->Monitor "<default monitor>"
[ 2445.936] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2445.936] (==) Automatically adding devices
[ 2445.936] (==) Automatically enabling devices
[ 2445.936] (==) Automatically adding GPU devices
[ 2445.936] (==) Automatically binding GPU devices
[ 2445.936] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 2445.936] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 2445.936] Entry deleted from font path.
[ 2445.936] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 2445.936] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 2445.936] Entry deleted from font path.
[ 2445.936] (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 2445.936] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1
[ 2445.936] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2445.936] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2445.936] (II) Module ABI versions:
[ 2445.936] X.Org ANSI C Emulation: 0.4
[ 2445.936] X.Org Video Driver: 24.0
[ 2445.936] X.Org XInput driver : 24.1
[ 2445.936] X.Org Server Extension : 10.0
[ 2445.937] (++) using VT number 1
[ 2445.939] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 2445.943] (--) PCI:*(1@0:0:0) 10de:0652:1025:021e rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/131072
[ 2445.943] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2445.943] (II) LoadModule: "glx"
[ 2445.943] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2445.979] (II) Module glx: vendor="X.Org Foundation"
[ 2445.979] compiled for 1.20.0, module version = 1.0.0
[ 2445.979] ABI class: X.Org Server Extension, version 10.0
[ 2445.979] (==) Matched nouveau as autoconfigured driver 0
[ 2445.979] (==) Matched nv as autoconfigured driver 1
[ 2445.979] (==) Matched modesetting as autoconfigured driver 2
[ 2445.979] (==) Matched fbdev as autoconfigured driver 3
[ 2445.979] (==) Matched vesa as autoconfigured driver 4
[ 2445.979] (==) Assigned the driver to the xf86ConfigLayout
[ 2445.979] (II) LoadModule: "nouveau"
[ 2445.979] (WW) Warning, couldn't open module nouveau
[ 2445.979] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 2445.979] (II) LoadModule: "nv"
[ 2445.980] (WW) Warning, couldn't open module nv
[ 2445.980] (EE) Failed to load module "nv" (module does not exist, 0)
[ 2445.980] (II) LoadModule: "modesetting"
[ 2445.980] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2445.984] (II) Module modesetting: vendor="X.Org Foundation"
[ 2445.984] compiled for 1.20.0, module version = 1.20.0
[ 2445.984] Module class: X.Org Video Driver
[ 2445.984] ABI class: X.Org Video Driver, version 24.0
[ 2445.984] (II) LoadModule: "fbdev"
[ 2445.984] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 2445.987] (II) Module fbdev: vendor="X.Org Foundation"
[ 2445.987] compiled for 1.20.0, module version = 0.4.4
[ 2445.987] Module class: X.Org Video Driver
[ 2445.987] ABI class: X.Org Video Driver, version 24.0
[ 2445.987] (II) LoadModule: "vesa"
[ 2445.987] (WW) Warning, couldn't open module vesa
[ 2445.987] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2445.987] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2445.987] (II) FBDEV: driver for framebuffer: fbdev
[ 2445.987] (EE) open /dev/dri/card0: No such file or directory
[ 2445.987] (WW) Falling back to old probe method for modesetting
[ 2445.987] (EE) open /dev/dri/card0: No such file or directory
[ 2445.987] (II) Loading sub module "fbdevhw"
[ 2445.988] (II) LoadModule: "fbdevhw"
[ 2445.988] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2445.989] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2445.989] compiled for 1.20.0, module version = 0.0.2
[ 2445.989] ABI class: X.Org Video Driver, version 24.0
[ 2445.990] (EE) Unable to find a valid framebuffer device
[ 2445.990] (WW) Falling back to old probe method for fbdev
[ 2445.990] (II) Loading sub module "fbdevhw"
[ 2445.990] (II) LoadModule: "fbdevhw"
[ 2445.990] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2445.990] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2445.990] compiled for 1.20.0, module version = 0.0.2
[ 2445.990] ABI class: X.Org Video Driver, version 24.0
[ 2445.990] (II) FBDEV(2): using default device
[ 2445.990] (EE) Screen 0 deleted because of no matching config section.
[ 2445.990] (II) UnloadModule: "modesetting"
[ 2445.990] (EE) Screen 0 deleted because of no matching config section.
[ 2445.990] (II) UnloadModule: "fbdev"
[ 2445.990] (II) UnloadSubModule: "fbdevhw"
[ 2445.990] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2445.990] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 2445.990] (==) FBDEV(0): RGB weight 888
[ 2445.990] (==) FBDEV(0): Default visual is TrueColor
[ 2445.990] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2445.990] (II) FBDEV(0): hardware: VESA VGA (video memory: 1216kB)
[ 2445.990] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[ 2445.990] (II) FBDEV(0): checking modes against framebuffer device...
[ 2445.990] (II) FBDEV(0): checking modes against monitor...
[ 2445.990] (II) FBDEV(0): Virtual size is 640x480 (pitch 640)
[ 2445.990] (**) FBDEV(0): Built-in mode "current": 30.7 MHz, 36.9 kHz, 73.3 Hz
[ 2445.990] (II) FBDEV(0): Modeline "current"x0.0 30.72 640 672 752 832 480 484 488 504 -hsync -vsync -csync (36.9 kHz b)
[ 2445.990] (==) FBDEV(0): DPI set to (96, 96)
[ 2445.990] (II) Loading sub module "fb"
[ 2445.990] (II) LoadModule: "fb"
[ 2445.990] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2445.993] (II) Module fb: vendor="X.Org Foundation"
[ 2445.993] compiled for 1.20.0, module version = 1.0.0
[ 2445.993] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2445.993] (**) FBDEV(0): using shadow framebuffer
[ 2445.993] (II) Loading sub module "shadow"
[ 2445.993] (II) LoadModule: "shadow"
[ 2445.993] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 2445.996] (II) Module shadow: vendor="X.Org Foundation"
[ 2445.996] compiled for 1.20.0, module version = 1.1.0
[ 2445.996] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2445.996] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[ 2445.996] (==) FBDEV(0): Backing store enabled
[ 2445.996] (==) FBDEV(0): DPMS enabled
[ 2445.997] (II) Initializing extension Generic Event Extension
[ 2445.997] (II) Initializing extension SHAPE
[ 2445.997] (II) Initializing extension MIT-SHM
[ 2445.997] (II) Initializing extension XInputExtension
[ 2445.997] (II) Initializing extension XTEST
[ 2445.997] (II) Initializing extension BIG-REQUESTS
[ 2445.997] (II) Initializing extension SYNC
[ 2445.997] (II) Initializing extension XKEYBOARD
[ 2445.997] (II) Initializing extension XC-MISC
[ 2445.997] (II) Initializing extension SECURITY
[ 2445.997] (II) Initializing extension XFIXES
[ 2445.997] (II) Initializing extension RENDER
[ 2445.997] (II) Initializing extension RANDR
[ 2445.997] (II) Initializing extension COMPOSITE
[ 2445.997] (II) Initializing extension DAMAGE
[ 2445.997] (II) Initializing extension MIT-SCREEN-SAVER
[ 2445.997] (II) Initializing extension DOUBLE-BUFFER
[ 2445.997] (II) Initializing extension RECORD
[ 2445.997] (II) Initializing extension DPMS
[ 2445.997] (II) Initializing extension Present
[ 2445.997] (II) Initializing extension DRI3
[ 2445.997] (II) Initializing extension X-Resource
[ 2445.997] (II) Initializing extension XVideo
[ 2445.997] (II) Initializing extension XVideo-MotionCompensation
[ 2445.997] (II) Initializing extension GLX
[ 2445.997] (II) AIGLX: Screen 0 is not DRI2 capable
[ 2446.225] (II) IGLX: Loaded and initialized swrast
[ 2446.225] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 2446.225] (II) Initializing extension XFree86-VidModeExtension
[ 2446.225] (II) Initializing extension XFree86-DGA
[ 2446.225] (II) Initializing extension XFree86-DRI
[ 2446.225] (II) Initializing extension DRI2
[ 2446.290] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2446.290] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2446.290] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 2446.290] (**) Power Button: Applying InputClass "system-keyboard"
[ 2446.290] (II) LoadModule: "libinput"
[ 2446.290] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 2446.293] (II) Module libinput: vendor="X.Org Foundation"
[ 2446.293] compiled for 1.19.6, module version = 0.27.1
[ 2446.293] Module class: X.Org XInput Driver
[ 2446.293] ABI class: X.Org XInput driver, version 24.1
[ 2446.293] (II) Using input driver 'libinput' for 'Power Button'
[ 2446.294] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 15 paused 0
[ 2446.294] (**) Power Button: always reports core events
[ 2446.294] (**) Option "Device" "/dev/input/event3"
[ 2446.294] (**) Option "_source" "server/udev"
[ 2446.295] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 2446.295] (II) event3 - Power Button: device is a keyboard
[ 2446.295] (II) event3 - Power Button: device removed
[ 2446.295] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2446.295] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2446.295] (**) Option "xkb_layout" "gb"
[ 2446.331] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 2446.331] (II) event3 - Power Button: device is a keyboard
[ 2446.332] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 2446.333] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2446.333] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 2446.333] (**) Video Bus: Applying InputClass "system-keyboard"
[ 2446.333] (II) Using input driver 'libinput' for 'Video Bus'
[ 2446.334] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 18 paused 0
[ 2446.334] (**) Video Bus: always reports core events
[ 2446.334] (**) Option "Device" "/dev/input/event4"
[ 2446.334] (**) Option "_source" "server/udev"
[ 2446.335] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 2446.336] (II) event4 - Video Bus: device is a keyboard
[ 2446.336] (II) event4 - Video Bus: device removed
[ 2446.336] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4/event4"
[ 2446.336] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 2446.336] (**) Option "xkb_layout" "gb"
[ 2446.337] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 2446.337] (II) event4 - Video Bus: device is a keyboard
[ 2446.338] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2446.338] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2446.338] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 2446.338] (**) Power Button: Applying InputClass "system-keyboard"
[ 2446.338] (II) Using input driver 'libinput' for 'Power Button'
[ 2446.340] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 19 paused 0
[ 2446.340] (**) Power Button: always reports core events
[ 2446.340] (**) Option "Device" "/dev/input/event1"
[ 2446.340] (**) Option "_source" "server/udev"
[ 2446.341] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 2446.341] (II) event1 - Power Button: device is a keyboard
[ 2446.341] (II) event1 - Power Button: device removed
[ 2446.341] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 2446.341] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 2446.341] (**) Option "xkb_layout" "gb"
[ 2446.343] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 2446.343] (II) event1 - Power Button: device is a keyboard
[ 2446.343] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 2446.343] (II) No input driver specified, ignoring this device.
[ 2446.343] (II) This device may have been added with another device file.
[ 2446.344] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 2446.344] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2446.344] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 2446.344] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 2446.344] (II) Using input driver 'libinput' for 'Sleep Button'
[ 2446.345] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 0
[ 2446.345] (**) Sleep Button: always reports core events
[ 2446.345] (**) Option "Device" "/dev/input/event2"
[ 2446.345] (**) Option "_source" "server/udev"
[ 2446.346] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 2446.346] (II) event2 - Sleep Button: device is a keyboard
[ 2446.346] (II) event2 - Sleep Button: device removed
[ 2446.346] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 2446.346] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 2446.346] (**) Option "xkb_layout" "gb"
[ 2446.346] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 2446.347] (II) event2 - Sleep Button: device is a keyboard
[ 2446.347] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event12)
[ 2446.348] (**) 2.4G Mouse: Applying InputClass "evdev pointer catchall"
[ 2446.348] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall"
[ 2446.348] (II) Using input driver 'libinput' for '2.4G Mouse'
[ 2446.410] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 21 paused 0
[ 2446.410] (**) 2.4G Mouse: always reports core events
[ 2446.410] (**) Option "Device" "/dev/input/event12"
[ 2446.410] (**) Option "_source" "server/udev"
[ 2446.411] (II) event12 - 2.4G Mouse: is tagged by udev as: Mouse
[ 2446.411] (II) event12 - 2.4G Mouse: device is a pointer
[ 2446.411] (II) event12 - 2.4G Mouse: device removed
[ 2446.411] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:1EA7:0064.0001/input/input19/event12"
[ 2446.411] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 10)
[ 2446.412] (**) Option "AccelerationScheme" "none"
[ 2446.412] (**) 2.4G Mouse: (accel) selected scheme none/0
[ 2446.412] (**) 2.4G Mouse: (accel) acceleration factor: 2.000
[ 2446.412] (**) 2.4G Mouse: (accel) acceleration threshold: 4
[ 2446.412] (II) event12 - 2.4G Mouse: is tagged by udev as: Mouse
[ 2446.412] (II) event12 - 2.4G Mouse: device is a pointer
[ 2446.413] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse1)
[ 2446.413] (II) No input driver specified, ignoring this device.
[ 2446.413] (II) This device may have been added with another device file.
[ 2446.414] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 2446.414] (II) No input driver specified, ignoring this device.
[ 2446.414] (II) This device may have been added with another device file.
[ 2446.414] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 2446.414] (II) No input driver specified, ignoring this device.
[ 2446.414] (II) This device may have been added with another device file.
[ 2446.415] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[ 2446.415] (II) No input driver specified, ignoring this device.
[ 2446.415] (II) This device may have been added with another device file.
[ 2446.415] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 2446.415] (II) No input driver specified, ignoring this device.
[ 2446.415] (II) This device may have been added with another device file.
[ 2446.416] (II) config/udev: Adding input device HD Video WebCam: HD Video WebCa (/dev/input/event13)
[ 2446.416] (**) HD Video WebCam: HD Video WebCa: Applying InputClass "evdev keyboard catchall"
[ 2446.416] (**) HD Video WebCam: HD Video WebCa: Applying InputClass "libinput keyboard catchall"
[ 2446.416] (**) HD Video WebCam: HD Video WebCa: Applying InputClass "system-keyboard"
[ 2446.416] (II) Using input driver 'libinput' for 'HD Video WebCam: HD Video WebCa'
[ 2446.417] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 22 paused 0
[ 2446.417] (**) HD Video WebCam: HD Video WebCa: always reports core events
[ 2446.417] (**) Option "Device" "/dev/input/event13"
[ 2446.417] (**) Option "_source" "server/udev"
[ 2446.418] (II) event13 - HD Video WebCam: HD Video WebCa: is tagged by udev as: Keyboard
[ 2446.418] (II) event13 - HD Video WebCam: HD Video WebCa: device is a keyboard
[ 2446.418] (II) event13 - HD Video WebCam: HD Video WebCa: device removed
[ 2446.418] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-8/2-8:1.0/input/input20/event13"
[ 2446.418] (II) XINPUT: Adding extended input device "HD Video WebCam: HD Video WebCa" (type: KEYBOARD, id 11)
[ 2446.418] (**) Option "xkb_layout" "gb"
[ 2446.419] (II) event13 - HD Video WebCam: HD Video WebCa: is tagged by udev as: Keyboard
[ 2446.419] (II) event13 - HD Video WebCam: HD Video WebCa: device is a keyboard
[ 2446.420] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 2446.420] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2446.420] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 2446.420] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 2446.420] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 2446.421] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 23 paused 0
[ 2446.421] (**) AT Translated Set 2 keyboard: always reports core events
[ 2446.421] (**) Option "Device" "/dev/input/event5"
[ 2446.421] (**) Option "_source" "server/udev"
[ 2446.422] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 2446.422] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 2446.422] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 2446.422] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 2446.422] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 2446.422] (**) Option "xkb_layout" "gb"
[ 2446.423] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 2446.423] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 2446.424] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 2446.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 2446.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 2446.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 2446.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 2446.424] (II) LoadModule: "synaptics"
[ 2446.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2446.424] (II) Module synaptics: vendor="X.Org Foundation"
[ 2446.424] compiled for 1.19.0, module version = 1.9.0
[ 2446.424] Module class: X.Org XInput Driver
[ 2446.424] ABI class: X.Org XInput driver, version 24.1
[ 2446.424] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2446.425] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 24 paused 0
[ 2446.425] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2446.425] (**) Option "Device" "/dev/input/event11"
[ 2446.426] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 2446.426] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5682 (res 55)
[ 2446.426] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4692 (res 98)
[ 2446.426] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2446.426] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2446.426] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 2446.426] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2446.426] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2446.426] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2446.426] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input11/event11"
[ 2446.426] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 2446.426] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2446.426] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 2446.426] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 2446.427] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2446.427] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2446.427] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2446.427] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2446.427] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2446.428] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2446.428] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2446.429] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 2446.429] (II) No input driver specified, ignoring this device.
[ 2446.429] (II) This device may have been added with another device file.
[ 2725.845] (EE) client bug: timer event12 debounce: offset negative (-6ms)
[ 2725.845] (EE) client bug: timer event12 debounce short: offset negative (-19ms)
[ 2733.234] (EE) client bug: timer event12 debounce: offset negative (-14ms)
[ 2733.234] (EE) client bug: timer event12 debounce short: offset negative (-28ms)
[ 3489.050] (EE) client bug: timer event12 debounce short: offset negative (-0ms)
[ 3528.293] (EE) client bug: timer event12 debounce short: offset negative (-0ms)
[ 4802.251] (EE) client bug: timer event12 debounce short: offset negative (-0ms)
[ 5405.877] (EE) client bug: timer event12 debounce short: offset negative (-0ms)dmesg:
[ 0.000000] Linux version 4.14.47-1-lts (builduser@eworm) (gcc version 8.1.0 (GCC)) #1 SMP Wed May 30 21:09:23 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=066691f6-14a0-4bfb-95aa-32b16d1ceee7 rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdaa0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdaa1000-0x00000000bdaa6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdaa7000-0x00000000bdbc9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdbca000-0x00000000bdc0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdc0f000-0x00000000bdd08fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdd09000-0x00000000bdf0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdf0f000-0x00000000bdf18fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdf19000-0x00000000bdf1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdf1f000-0x00000000bdf63fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdf64000-0x00000000bdf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdf9f000-0x00000000bdfe0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdfe1000-0x00000000bdffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Acer Aspire 5739G /JM50-MV , BIOS V1.3311 12/21/2009
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f75f0-0x000f75ff] mapped at [ffffffffff2005f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff936ac0099000] 99000 size 24576
[ 0.000000] BRK [0x11f63c000, 0x11f63cfff] PGTABLE
[ 0.000000] BRK [0x11f63d000, 0x11f63dfff] PGTABLE
[ 0.000000] BRK [0x11f63e000, 0x11f63efff] PGTABLE
[ 0.000000] BRK [0x11f63f000, 0x11f63ffff] PGTABLE
[ 0.000000] BRK [0x11f640000, 0x11f640fff] PGTABLE
[ 0.000000] BRK [0x11f641000, 0x11f641fff] PGTABLE
[ 0.000000] BRK [0x11f642000, 0x11f642fff] PGTABLE
[ 0.000000] BRK [0x11f643000, 0x11f643fff] PGTABLE
[ 0.000000] BRK [0x11f644000, 0x11f644fff] PGTABLE
[ 0.000000] BRK [0x11f645000, 0x11f645fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36e8e000-0x3773efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7510 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x00000000BDFF573B 000074 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BDFE5000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x00000000BDFE6000 0092A1 (v02 Intel CANTIGA 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000BDF9EFC0 000040
[ 0.000000] ACPI: FACS 0x00000000BDF9EFC0 000040
[ 0.000000] ACPI: HPET 0x00000000BDFFED86 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x00000000BDFFEDBE 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 0x00000000BDFFEDFA 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BDFFEE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BDFFEE8A 000176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BDFF57D7 0001A6 (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BDFE4000 000655 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BDFE3000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BDFE2000 00020F (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13fffc000-0x13fffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bdaa0fff]
[ 0.000000] node 0: [mem 0x00000000bdaa7000-0x00000000bdbc9fff]
[ 0.000000] node 0: [mem 0x00000000bdc0f000-0x00000000bdd08fff]
[ 0.000000] node 0: [mem 0x00000000bdf0f000-0x00000000bdf18fff]
[ 0.000000] node 0: [mem 0x00000000bdf1f000-0x00000000bdf63fff]
[ 0.000000] node 0: [mem 0x00000000bdf9f000-0x00000000bdfe0fff]
[ 0.000000] node 0: [mem 0x00000000bdfff000-0x00000000bdffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 1039598
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12086 pages used for memmap
[ 0.000000] DMA32 zone: 773456 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdaa1000-0xbdaa6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdbca000-0xbdc0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdd09000-0xbdf0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdf19000-0xbdf1efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdf64000-0xbdf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdfe1000-0xbdffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xffffffff]
[ 0.000000] e820: [mem 0xbe000000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x4cc with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff936bffc00000 s132504 r8192 d31336 u1048576
[ 0.000000] pcpu-alloc: s132504 r8192 d31336 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1023331
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=066691f6-14a0-4bfb-95aa-32b16d1ceee7 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3994656K/4158392K available (10252K kernel code, 1149K rwdata, 2828K rodata, 1412K init, 988K bss, 163736K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 29111 entries in 114 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 8448, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.010000] tsc: Detected 2094.815 MHz processor
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.63 BogoMIPS (lpj=20948150)
[ 0.010000] pid_max: default: 32768 minimum: 301
[ 0.010000] ACPI: Core revision 20170728
[ 0.020968] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.021001] Security Framework initialized
[ 0.021003] Yama: becoming mindful.
[ 0.022964] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024096] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.024164] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024203] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024540] CPU: Physical Processor ID: 0
[ 0.024542] CPU: Processor Core ID: 0
[ 0.024544] mce: CPU supports 6 MCE banks
[ 0.024552] CPU0: Thermal monitoring enabled (TM2)
[ 0.024555] process: using mwait in idle threads
[ 0.024560] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.024561] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.024563] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024565] Speculative Store Bypass: Vulnerable
[ 0.024710] Freeing SMP alternatives memory: 28K
[ 0.027523] smpboot: Max logical packages: 1
[ 0.027962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.130000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.130000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.130000] ... version: 2
[ 0.130000] ... bit width: 40
[ 0.130000] ... generic registers: 2
[ 0.130000] ... value mask: 000000ffffffffff
[ 0.130000] ... max period: 000000007fffffff
[ 0.130000] ... fixed-purpose events: 3
[ 0.130000] ... event mask: 0000000700000003
[ 0.130000] Hierarchical SRCU implementation.
[ 0.130000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.130000] smp: Bringing up secondary CPUs ...
[ 0.130000] x86: Booting SMP configuration:
[ 0.130000] .... node #0, CPUs: #1
[ 0.130000] smp: Brought up 1 node, 2 CPUs
[ 0.130000] smpboot: Total of 2 processors activated (8379.26 BogoMIPS)
[ 0.130000] devtmpfs: initialized
[ 0.130000] x86/mm: Memory block size: 128MB
[ 0.130000] PM: Registering ACPI NVS region [mem 0xbdf64000-0xbdf9efff] (241664 bytes)
[ 0.130000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.130000] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.130000] pinctrl core: initialized pinctrl subsystem
[ 0.130000] RTC time: 19:22:51, date: 06/06/18
[ 0.130000] NET: Registered protocol family 16
[ 0.130000] cpuidle: using governor ladder
[ 0.130000] cpuidle: using governor menu
[ 0.130000] Simple Boot Flag at 0x36 set to 0x1
[ 0.130000] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.130000] ACPI: bus type PCI registered
[ 0.130000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.130000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.130000] PCI: not using MMCONFIG
[ 0.130000] PCI: Using configuration type 1 for base access
[ 0.130000] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.130000] mtrr: probably your BIOS does not setup all CPUs.
[ 0.130000] mtrr: corrected configuration.
[ 0.130000] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.130000] ACPI: Added _OSI(Module Device)
[ 0.130000] ACPI: Added _OSI(Processor Device)
[ 0.130000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.130000] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.132412] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.133100] ACPI: Dynamic OEM Table Load:
[ 0.133108] ACPI: SSDT 0xFFFF936BFA526800 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.133362] ACPI: Dynamic OEM Table Load:
[ 0.133369] ACPI: SSDT 0xFFFF936BFA559000 0005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.133603] ACPI: Dynamic OEM Table Load:
[ 0.133603] ACPI: SSDT 0xFFFF936BFA57A600 0001CF (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.133603] ACPI: Dynamic OEM Table Load:
[ 0.133603] ACPI: SSDT 0xFFFF936BFA4BEC00 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.133603] ACPI: EC: EC started
[ 0.133603] ACPI: EC: interrupt blocked
[ 0.133603] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.133603] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.133603] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.133603] ACPI: Interpreter enabled
[ 0.133603] ACPI: (supports S0 S3 S4 S5)
[ 0.133603] ACPI: Using IOAPIC for interrupt routing
[ 0.133603] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.133603] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.133608] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.133889] ACPI: Enabled 13 GPEs in block 00 to 3F
[ 0.145818] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.145825] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.145830] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.146336] PCI host bridge to bus 0000:00
[ 0.146339] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.146341] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.146343] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.146344] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.146346] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.146348] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.146350] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.146352] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.146354] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.146356] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.146366] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.146395] DMAR: Forcing write-buffer flush capability
[ 0.146395] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.146493] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 0.146544] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.146684] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.146751] pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f]
[ 0.146904] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.146982] pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f]
[ 0.147147] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.147176] pci 0000:00:1a.7: reg 0x10: [mem 0xf0404800-0xf0404bff]
[ 0.147290] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.147402] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.147433] pci 0000:00:1b.0: reg 0x10: [mem 0xf0400000-0xf0403fff 64bit]
[ 0.147544] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.147656] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.147766] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.147881] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.147990] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.148108] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.148215] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.148328] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.148390] pci 0000:00:1d.0: reg 0x20: [io 0x1840-0x185f]
[ 0.148534] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.148596] pci 0000:00:1d.1: reg 0x20: [io 0x1860-0x187f]
[ 0.148744] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.148807] pci 0000:00:1d.2: reg 0x20: [io 0x1880-0x189f]
[ 0.148945] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.149007] pci 0000:00:1d.3: reg 0x20: [io 0x18a0-0x18bf]
[ 0.149163] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.149193] pci 0000:00:1d.7: reg 0x10: [mem 0xf0404c00-0xf0404fff]
[ 0.149303] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.149403] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.149573] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.149809] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.149839] pci 0000:00:1f.2: reg 0x10: [io 0x18f0-0x18f7]
[ 0.149851] pci 0000:00:1f.2: reg 0x14: [io 0x18e4-0x18e7]
[ 0.149862] pci 0000:00:1f.2: reg 0x18: [io 0x18e8-0x18ef]
[ 0.149874] pci 0000:00:1f.2: reg 0x1c: [io 0x18e0-0x18e3]
[ 0.149885] pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.149896] pci 0000:00:1f.2: reg 0x24: [mem 0xf0404000-0xf04047ff]
[ 0.149962] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.150067] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.150095] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[ 0.150126] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.150380] pci 0000:01:00.0: [10de:0652] type 00 class 0x030000
[ 0.150509] pci 0000:01:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
[ 0.150599] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.150688] pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
[ 0.150746] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
[ 0.150804] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.150846] pci 0000:01:00.0: enabling Extended Tags
[ 0.180044] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.180047] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.180050] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.180055] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.180118] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
[ 0.180122] pci 0000:00:1c.0: bridge window [io 0x0000-0x0fff]
[ 0.180127] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.180134] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.180222] pci 0000:05:00.0: [8086:4232] type 00 class 0x028000
[ 0.180277] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 0.180461] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.210030] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.210035] pci 0000:00:1c.1: bridge window [io 0x0000-0x0fff]
[ 0.210039] pci 0000:00:1c.1: bridge window [mem 0x00000000-0x000fffff]
[ 0.210047] pci 0000:00:1c.1: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.210138] pci 0000:09:00.0: [1969:1063] type 00 class 0x020000
[ 0.210176] pci 0000:09:00.0: reg 0x10: [mem 0x00000000-0x0003ffff 64bit]
[ 0.210187] pci 0000:09:00.0: reg 0x18: [io 0x0000-0x007f]
[ 0.210310] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.240024] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.240029] pci 0000:00:1c.5: bridge window [io 0x0000-0x0fff]
[ 0.240033] pci 0000:00:1c.5: bridge window [mem 0x00000000-0x000fffff]
[ 0.240040] pci 0000:00:1c.5: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.240139] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[ 0.240152] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.240154] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.240156] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.240158] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.240160] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.240162] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.240167] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.240169] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 0.240171] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.240683] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.240747] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.240808] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.240869] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.240929] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.240990] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.241051] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.241114] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.241228] ACPI: EC: interrupt unblocked
[ 0.241238] ACPI: EC: event unblocked
[ 0.241247] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.241249] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.241346] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.241346] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.241346] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.241346] vgaarb: loaded
[ 0.241346] EDAC MC: Ver: 3.0.0
[ 0.241346] PCI: Using ACPI for IRQ routing
[ 0.249319] PCI: pci_cache_line_size set to 64 bytes
[ 0.249402] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.249404] e820: reserve RAM buffer [mem 0xbdaa1000-0xbfffffff]
[ 0.249406] e820: reserve RAM buffer [mem 0xbdbca000-0xbfffffff]
[ 0.249408] e820: reserve RAM buffer [mem 0xbdd09000-0xbfffffff]
[ 0.249410] e820: reserve RAM buffer [mem 0xbdf19000-0xbfffffff]
[ 0.249411] e820: reserve RAM buffer [mem 0xbdf64000-0xbfffffff]
[ 0.249413] e820: reserve RAM buffer [mem 0xbdfe1000-0xbfffffff]
[ 0.249414] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
[ 0.249544] NetLabel: Initializing
[ 0.249545] NetLabel: domain hash size = 128
[ 0.249546] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.249567] NetLabel: unlabeled traffic allowed by default
[ 0.250037] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.250042] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.250047] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.251007] clocksource: Switched to clocksource hpet
[ 0.267083] VFS: Disk quotas dquot_6.6.0
[ 0.267116] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.267215] pnp: PnP ACPI init
[ 0.267802] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.267809] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.267854] pnp 00:01: disabling [io 0x002e-0x002f] because it overlaps 0000:09:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.267857] pnp 00:01: disabling [io 0x0061] because it overlaps 0000:09:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.267859] pnp 00:01: disabling [io 0x0063] because it overlaps 0000:09:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.267862] pnp 00:01: disabling [io 0x0065] because it overlaps 0000:09:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.267864] pnp 00:01: disabling [io 0x0067] because it overlaps 0000:09:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.267866] pnp 00:01: disabling [io 0x0068-0x006f] because it overlaps 0000:09:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.267869] pnp 00:01: disabling [io 0x0070] because it overlaps 0000:09:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.267906] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.267908] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.267911] system 00:01: [io 0xffff] has been reserved
[ 0.267913] system 00:01: [io 0xffff] has been reserved
[ 0.267915] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.267918] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.267920] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.267922] system 00:01: [io 0xfe00] has been reserved
[ 0.267925] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.267930] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267968] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268068] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.268100] pnp 00:04: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.268263] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.268266] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.268268] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.268271] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.268273] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.268275] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.268278] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.268283] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268416] pnp: PnP ACPI: found 6 devices
[ 0.275399] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.275428] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-04] add_size 1000
[ 0.275432] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-04] add_size 200000 add_align 100000
[ 0.275435] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-04] add_size 200000 add_align 100000
[ 0.275450] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.275456] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.275459] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff] to [bus 05] add_size 200000 add_align 100000
[ 0.275475] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[ 0.275478] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 09] add_size 200000 add_align 100000
[ 0.275500] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.275507] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.275510] pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0400000-0xc06fffff]
[ 0.275516] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0700000-0xc08fffff 64bit pref]
[ 0.275520] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0900000-0xc0bfffff]
[ 0.275526] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0c00000-0xc0dfffff 64bit pref]
[ 0.275529] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.275532] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.275535] pci 0000:00:1c.5: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.275541] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0e00000-0xc0e000ff 64bit]
[ 0.275556] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 0.275559] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 0.275561] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.275564] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.275568] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.275570] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.275575] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
[ 0.275578] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.275584] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.275589] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.275598] pci 0000:05:00.0: BAR 0: assigned [mem 0xc0400000-0xc0401fff 64bit]
[ 0.275619] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.275622] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.275627] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc06fffff]
[ 0.275632] pci 0000:00:1c.1: bridge window [mem 0xc0700000-0xc08fffff 64bit pref]
[ 0.275641] pci 0000:09:00.0: BAR 0: assigned [mem 0xc0900000-0xc093ffff 64bit]
[ 0.275657] pci 0000:09:00.0: BAR 2: assigned [io 0x5000-0x507f]
[ 0.275662] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.275666] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.275672] pci 0000:00:1c.5: bridge window [mem 0xc0900000-0xc0bfffff]
[ 0.275676] pci 0000:00:1c.5: bridge window [mem 0xc0c00000-0xc0dfffff 64bit pref]
[ 0.275684] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[ 0.275700] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.275702] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.275704] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.275706] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.275708] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.275710] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.275712] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.275714] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff window]
[ 0.275715] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff window]
[ 0.275718] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.275719] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[ 0.275721] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.275723] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.275725] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.275727] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.275729] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.275731] pci_bus 0000:05: resource 1 [mem 0xc0400000-0xc06fffff]
[ 0.275733] pci_bus 0000:05: resource 2 [mem 0xc0700000-0xc08fffff 64bit pref]
[ 0.275735] pci_bus 0000:09: resource 0 [io 0x5000-0x5fff]
[ 0.275737] pci_bus 0000:09: resource 1 [mem 0xc0900000-0xc0bfffff]
[ 0.275739] pci_bus 0000:09: resource 2 [mem 0xc0c00000-0xc0dfffff 64bit pref]
[ 0.275741] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7 window]
[ 0.275743] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff window]
[ 0.275745] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.275746] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.275748] pci_bus 0000:0a: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.275750] pci_bus 0000:0a: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.275752] pci_bus 0000:0a: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.275754] pci_bus 0000:0a: resource 11 [mem 0xc0000000-0xdfffffff window]
[ 0.275756] pci_bus 0000:0a: resource 12 [mem 0xf0000000-0xfebfffff window]
[ 0.275851] NET: Registered protocol family 2
[ 0.276059] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.276193] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.276403] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.276464] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.276496] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.276571] NET: Registered protocol family 1
[ 0.277991] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.278008] pci 0000:09:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.278012] PCI: CLS 64 bytes, default 64
[ 0.278079] Unpacking initramfs...
[ 0.466091] Freeing initrd memory: 8900K
[ 0.466116] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.466121] software IO TLB [mem 0xb9aa1000-0xbdaa1000] (64MB) mapped at [ffff936b79aa1000-ffff936b7daa0fff]
[ 0.466322] Scanning for low memory corruption every 60 seconds
[ 0.467101] Initialise system trusted keyrings
[ 0.467116] Key type blacklist registered
[ 0.467196] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[ 0.468936] zbud: loaded
[ 0.470811] Key type asymmetric registered
[ 0.470854] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.470895] io scheduler noop registered
[ 0.470897] io scheduler deadline registered (default)
[ 0.470964] io scheduler cfq registered
[ 0.470965] io scheduler mq-deadline registered
[ 0.470966] io scheduler kyber registered
[ 0.471001] io scheduler bfq registered
[ 0.471357] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.471564] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.471764] pcieport 0000:00:1c.5: enabling device (0000 -> 0003)
[ 0.471998] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.471999] vesafb: scrolling: redraw
[ 0.472001] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.472017] vesafb: framebuffer at 0xcd000000, mapped to 0xffffac8280a00000, using 1216k, total 1216k
[ 0.490968] Console: switching to colour frame buffer device 80x30
[ 0.509760] fb0: VESA VGA frame buffer device
[ 0.509780] intel_idle: does not run on family 6 model 23
[ 0.510149] Monitor-Mwait will be used to enter C-1 state
[ 0.510162] Monitor-Mwait will be used to enter C-2 state
[ 0.510172] Monitor-Mwait will be used to enter C-3 state
[ 0.510178] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.511672] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.512567] rtc_cmos 00:02: RTC can wake from S4
[ 0.512745] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.512778] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.512826] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.512863] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.513160] NET: Registered protocol family 10
[ 0.517793] Segment Routing with IPv6
[ 0.517821] NET: Registered protocol family 17
[ 0.518020] RAS: Correctable Errors collector initialized.
[ 0.518064] microcode: sig=0x1067a, pf=0x80, revision=0xa07
[ 0.518134] microcode: Microcode Update Driver: v2.2.
[ 0.518325] registered taskstats version 1
[ 0.518335] Loading compiled-in X.509 certificates
[ 0.518359] zswap: loaded using pool lzo/zbud
[ 0.522547] Key type big_key registered
[ 0.523051] Magic number: 6:289:394
[ 0.523187] rtc_cmos 00:02: setting system clock to 2018-06-06 19:22:51 UTC (1528312971)
[ 0.526454] Freeing unused kernel memory: 1412K
[ 0.526456] Write protecting the kernel read-only data: 16384k
[ 0.527699] Freeing unused kernel memory: 2016K
[ 0.531978] Freeing unused kernel memory: 1268K
[ 0.633249] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.633301] ACPI: Lid Switch [LID]
[ 0.633361] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.633372] ACPI: Power Button [PWRB]
[ 0.633424] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.633436] ACPI: Sleep Button [SLPB]
[ 0.633525] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.636464] ACPI: Power Button [PWRF]
[ 0.643345] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.645405] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.652016] i8042: Detected active multiplexing controller, rev 1.1
[ 0.655726] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.655733] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.655736] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.655738] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.655740] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.666192] ACPI: bus type USB registered
[ 0.666239] usbcore: registered new interface driver usbfs
[ 0.666256] usbcore: registered new interface driver hub
[ 0.666292] usbcore: registered new device driver usb
[ 0.668242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.668558] ehci-pci: EHCI PCI platform driver
[ 0.668798] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.668807] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.668824] ehci-pci 0000:00:1a.7: debug port 1
[ 0.672761] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.672789] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf0404800
[ 0.674768] SCSI subsystem initialized
[ 0.680432] libata version 3.00 loaded.
[ 0.680719] acpi device:01: registered as cooling_device2
[ 0.681138] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4
[ 0.710143] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.710384] hub 1-0:1.0: USB hub found
[ 0.710409] hub 1-0:1.0: 4 ports detected
[ 0.710785] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.710791] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.710808] ehci-pci 0000:00:1d.7: debug port 1
[ 0.714717] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.714732] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0404c00
[ 0.738492] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.740318] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.740674] hub 2-0:1.0: USB hub found
[ 0.740685] hub 2-0:1.0: 8 ports detected
[ 0.742081] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.742990] ahci 0000:00:1f.2: version 3.0
[ 0.743267] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.743311] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.743315] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc sxs
[ 0.746077] scsi host0: ahci
[ 0.746389] scsi host1: ahci
[ 0.746507] scsi host2: ahci
[ 0.746620] scsi host3: ahci
[ 0.746944] scsi host4: ahci
[ 0.747095] scsi host5: ahci
[ 0.747159] ata1: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404100 irq 24
[ 0.747162] ata2: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404180 irq 24
[ 0.747163] ata3: DUMMY
[ 0.747164] ata4: DUMMY
[ 0.747167] ata5: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404300 irq 24
[ 0.747169] ata6: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404380 irq 24
[ 0.747369] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.747378] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.747389] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.747420] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.747880] hub 3-0:1.0: USB hub found
[ 0.747891] hub 3-0:1.0: 2 ports detected
[ 0.748160] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.748166] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.748174] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.748215] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.748488] hub 4-0:1.0: USB hub found
[ 0.748497] hub 4-0:1.0: 2 ports detected
[ 0.748746] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.748753] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.748760] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.748784] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.749007] hub 5-0:1.0: USB hub found
[ 0.749017] hub 5-0:1.0: 2 ports detected
[ 0.749254] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.749261] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.749269] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.749293] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.749500] hub 6-0:1.0: USB hub found
[ 0.749509] hub 6-0:1.0: 2 ports detected
[ 0.749754] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.749760] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.749770] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.749807] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.750036] hub 7-0:1.0: USB hub found
[ 0.750045] hub 7-0:1.0: 2 ports detected
[ 0.750265] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.750271] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.750279] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.750302] uhci_hcd 0000:00:1d.3: irq 16, io base 0x000018a0
[ 0.750500] hub 8-0:1.0: USB hub found
[ 0.750509] hub 8-0:1.0: 2 ports detected
[ 1.110222] usb 2-8: new high-speed USB device number 2 using ehci-pci
[ 1.240255] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.320037] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 1.520257] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e320e7eb7f, max_idle_ns: 440795285694 ns
[ 1.532618] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.537685] usbcore: registered new interface driver usbhid
[ 1.537686] usbhid: USB HID core driver
[ 1.602797] random: fast init done
[ 1.680254] ata1.00: unexpected _GTF length (8)
[ 1.680660] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133
[ 1.680664] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.120289] ata1.00: unexpected _GTF length (8)
[ 2.120653] ata1.00: configured for UDMA/133
[ 2.120869] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 C60F PQ: 0 ANSI: 5
[ 2.280248] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.620261] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.621673] ata2.00: ATAPI: MATSHITABD-CMB UJ141AJ, 1.00, max UDMA/100
[ 2.623060] ata2.00: configured for UDMA/100
[ 2.624554] scsi 1:0:0:0: CD-ROM MATSHITA BD-CMB UJ141AJ 1.00 PQ: 0 ANSI: 5
[ 3.010550] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.340265] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.344786] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.344802] sd 0:0:0:0: [sda] Write Protect is off
[ 3.344805] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.344832] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.392720] sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.392724] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.392937] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.404896] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 3.405614] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.202155] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.263364] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.345361] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 7.370378] systemd[1]: Detected architecture x86-64.
[ 7.389286] systemd[1]: Set hostname to <spark>.
[ 9.171877] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.172008] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.172106] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.172159] systemd[1]: Listening on udev Kernel Socket.
[ 9.172184] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.172244] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.183657] systemd[1]: Listening on Process Core Dump Socket.
[ 9.183773] systemd[1]: Listening on udev Control Socket.
[ 9.185678] systemd[1]: Created slice system-getty.slice.
[ 9.185839] systemd[1]: Listening on Journal Socket.
[ 9.529735] vboxdrv: loading out-of-tree module taints kernel.
[ 9.537140] vboxdrv: Found 2 processor cores
[ 9.537425] vboxdrv: fAsync=0 offMin=0x1ed offMax=0x28bb
[ 9.637568] vboxdrv: TSC mode is Synchronous, tentative frequency 2094986196 Hz
[ 9.637570] vboxdrv: Successfully loaded version 5.2.12 (interface 0x00290001)
[ 9.743845] VBoxPciLinuxInit
[ 9.792543] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 9.966633] vboxpci: IOMMU not found (not registered)
[ 10.036703] VBoxNetAdp: Successfully started.
[ 10.120208] VBoxNetFlt: Successfully started.
[ 10.150340] systemd-journald[210]: Received request to flush runtime journal from PID 1
[ 11.006792] random: crng init done
[ 11.006798] random: 7 urandom warning(s) missed due to ratelimiting
[ 14.090405] ACPI: Battery Slot [BAT1] (battery present)
[ 14.108741] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.120767] ACPI: AC Adapter [ACAD] (on-line)
[ 14.198485] Linux agpgart interface v0.103
[ 14.230329] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 14.230599] thermal LNXTHERM:00: registered as thermal_zone0
[ 14.230601] ACPI: Thermal Zone [THRM] (34 C)
[ 14.784967] atl1c 0000:09:00.0: enabling device (0000 -> 0002)
[ 14.840607] atl1c 0000:09:00.0: version 1.0.1.1-NAPI
[ 14.841765] Intel(R) Wireless WiFi driver for Linux
[ 14.841766] Copyright(c) 2003- 2015 Intel Corporation
[ 14.841848] iwlwifi 0000:05:00.0: enabling device (0000 -> 0002)
[ 14.841963] iwlwifi 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 15.161939] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[ 15.161949] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.161953] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20170728/utaddress-247)
[ 15.161959] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.161960] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20170728/utaddress-247)
[ 15.161965] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.161966] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.223592] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 15.259016] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 15.259610] acer_wmi: Function bitmap for Communication Device: 0x87
[ 15.378036] iwlwifi 0000:05:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[ 15.635735] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 15.668173] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=3 (0x14/0x17/0x16/0x0/0x0) type:speaker
[ 15.668178] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.668181] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 15.668184] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 15.668186] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 15.668188] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 15.668192] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 15.668194] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 15.668197] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 15.824543] intel_powerclamp: No package C-state available
[ 15.827247] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.827717] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 15.827814] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 15.827912] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 16.065452] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 16.065457] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 16.065461] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 16.065465] iwlwifi 0000:05:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 16.170422] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692]
[ 16.243025] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000/0xa0000/0x0, board id: 0, fw id: 554713
[ 16.289324] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
[ 16.375674] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 17.262426] input: 2.4G Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:1EA7:0064.0001/input/input19
[ 17.262616] hid-generic 0003:1EA7:0064.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:1a.0-1/input0
[ 17.493923] atl1c 0000:09:00.0 enp9s0: renamed from eth0
[ 17.712065] iTCO_vendor_support: vendor-support=0
[ 17.746343] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 17.746432] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 17.746636] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.795734] Adding 2829308k swap on /dev/sda6. Priority:-2 extents:1 across:2829308k FS
[ 17.930570] media: Linux media interface: v0.10
[ 18.025361] Linux video capture interface: v2.00
[ 18.169524] mousedev: PS/2 mouse device common for all mice
[ 18.180305] iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0
[ 18.544473] uvcvideo: Found UVC 1.00 device HD Video WebCam (064e:a117)
[ 18.552806] uvcvideo 2-8:1.0: Entity type for entity Extension 5 was not initialized!
[ 18.552811] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized!
[ 18.552815] uvcvideo 2-8:1.0: Entity type for entity Processing 3 was not initialized!
[ 18.552818] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized!
[ 18.552981] input: HD Video WebCam: HD Video WebCa as /devices/pci0000:00/0000:00:1d.7/usb2/2-8/2-8:1.0/input/input20
[ 18.553118] usbcore: registered new interface driver uvcvideo
[ 18.553120] USB Video Class driver (1.1.1)
[ 20.517145] fuse init (API version 7.26)
[ 23.873374] iwlwifi 0000:05:00.0: Radio type=0x1-0x2-0x0
[ 24.017093] iwlwifi 0000:05:00.0: Radio type=0x1-0x2-0x0
[ 24.065750] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 27.382114] wlp5s0: authenticate with 9c:97:26:0f:dd:52
[ 27.385898] wlp5s0: send auth to 9c:97:26:0f:dd:52 (try 1/3)
[ 27.490057] wlp5s0: send auth to 9c:97:26:0f:dd:52 (try 2/3)
[ 27.491899] wlp5s0: authenticated
[ 27.492112] wlp5s0: waiting for beacon from 9c:97:26:0f:dd:52
[ 27.510274] wlp5s0: associate with 9c:97:26:0f:dd:52 (try 1/3)
[ 27.513943] wlp5s0: RX AssocResp from 9c:97:26:0f:dd:52 (capab=0x411 status=0 aid=10)
[ 27.516978] wlp5s0: associated
[ 27.541863] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 28.137862] 8021q: 802.1Q VLAN Support v1.8
[ 1314.616827] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79900
[ 1567.941594] perf: interrupt took too long (3161 > 3126), lowering kernel.perf_event_max_sample_rate to 63200
[ 1986.274653] perf: interrupt took too long (3952 > 3951), lowering kernel.perf_event_max_sample_rate to 50600
[ 2739.314086] perf: interrupt took too long (4995 > 4940), lowering kernel.perf_event_max_sample_rate to 40000
[ 2757.325804] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 2757.326455] CPU1: Core temperature/speed normalThere is only one config file that I can see that is related to the keyboard.
Offline
#6 2018-06-06 21:11:52
- loqs
- Member
- Registered: 2014-03-06
- Posts: 19,113
Re: [Solved] X.org server now working, but super low resolution
There is no sign of the nvidia kernel module in dmesg output.
Offline
#7 2018-06-06 21:37:09
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,849
Re: [Solved] X.org server now working, but super low resolution
In addition there's no sign of the nouveau module and
[ 2445.987] (EE) open /dev/dri/card0: No such file or directory
[ 2445.987] (WW) Falling back to old probe method for modesetting
[ 2445.987] (EE) open /dev/dri/card0: No such file or directoryYou probably still have nouveau blacklisted?
Offline
#8 2018-06-07 06:47:17
- kabads
- Member
- Registered: 2012-09-22
- Posts: 271
- Website
Re: [Solved] X.org server now working, but super low resolution
Thankyou - where would I check to see if nouveau is blacklisted? I'm guessing that this will be falling back on the xf86-video? I'm not really interested in 3D acceleration on this machine, so am ambivalent about the driver I use - I'd just like a usable desktop.
If it is using xf86-video, is it advisable to carry on using this and configure a larger resolution?
I started to search for whether nvidia-340xx-lts is now compatible with X.org-server 1.20 and then booted this machine and it just worked (with a reduced resolution).
Offline
#9 2018-06-07 07:35:26
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,435
Re: [Solved] X.org server now working, but super low resolution
If you have installed any form of the nvidia packages nouveau will be blacklisted by virtue of a file in modprobe.d. The distinction between xf86-video and nouveau doesn't factor in here. xf86 are the xorg drivers and "nouveau" is the kernel module, you usually need both regardless of what you are attempting to do (although one can, and currently likely should omit the xf86-video drivers, as that will make xorg use an actively developed generic "xf86-video-modesetting" driver while afaik xff86-video-nouveau hasn't seen a proper compatibility release yet)
If you intend to test nouveau, remove all nvidia packages and retry.
And FWIW there does seem to be a new nvidia-340xx release, but it is currently in testing, if you are using lts anyway you could grab the nvidia-340xx-{lts,utils} packages from testing, they are currently built against the repo kernel anyway.
Offline
#10 2018-06-07 12:09:19
- kabads
- Member
- Registered: 2012-09-22
- Posts: 271
- Website
Re: [Solved] X.org server now working, but super low resolution
OK - the testing packages work - many thanks. I downloaded them and installed with pacman -U. What will happen when they move in to the repo that I regularly use?
Offline
#11 2018-06-07 12:19:31
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,435
Re: [Solved] X.org server now working, but super low resolution
They are going to be updated as normal, one thing you might've to be weary of is if the non-testing linux-lts is updated while the nvidia-340xx packages are still not moved to the repo, then you might've to explicitly update them from testing again, or if that contains a newer kernel version also install the lts kernel from testing. That combination is quite unlikely to happen though. You are most likely going to be fine, without further action.
Last edited by V1del (2018-06-07 12:20:09)
Offline
#12 2018-06-07 12:34:19
- kabads
- Member
- Registered: 2012-09-22
- Posts: 271
- Website
Re: [Solved] X.org server now working, but super low resolution
That's great - this forum, the people who help out here, and the wiki make arch a great distro - I'll mark this as solved.
Offline