You are not logged in.

Pages: 1

#1 2018-06-08 06:47:12

mrinalabrol
Member
Registered: 2016-12-04
Posts: 3

No keyboard or mouse input after login into Gnome

Hi,

I recently upgraded my system and after login, my keyboard and mouse clicks aren't registered, however, the mouse cursor and Ctrl+Alt+Back do work fine.

Both mouse and keyboard work perfectly in the login screen and I'm also able to use the keyboard in the TTYs.

I'm unsure about what I should do next and hope someone can help me.

Last edited by mrinalabrol (2018-06-08 06:47:50)

Offline

#2 2018-06-08 08:16:44

robg
Member
Registered: 2015-03-05
Posts: 225

Re: No keyboard or mouse input after login into Gnome

Please post the output of `lspci`and `pacman -Qs input`. Also, if you have X.org configuration files, please post the contents of those as well. Finally, are you logged into a wayland or X.org session?

Offline

#3 2018-06-08 15:46:14

mrinalabrol
Member
Registered: 2016-12-04
Posts: 3

Re: No keyboard or mouse input after login into Gnome

@robg thanks for the quick response.

I am currently trying to log into the Xorg session

Here is the output for `lspci`: 

00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5500 (rev 09)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation Broadwell-U Processor Thermal Subsystem (rev 09)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #2 (rev e3)
00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3)
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
08:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 0a)
0a:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev a2)

and `pacman -Qs input`: 

local/ibus 1.5.18-1
    Next Generation Input Bus for Linux
local/libcdio 2.0.0-1
    GNU Compact Disc Input and Control Library
local/libinput 1.10.7-1
    Input device management and event handling library
local/libspnav 0.2.3-2
    Alternative to the proprietary 3Dconnexion device driver and SDK for their 3D input devices
local/libxi 1.7.9-1
    X11 Input extension library
local/potrace 1.15-1
    Utility for tracing a bitmap (input: PBM,PGM,PPM,BMP; output: EPS,PS,PDF,SVG,DXF,PGM,Gimppath,XFig)
local/xf86-input-evdev 2.10.6-1 (xorg-drivers)
    X.org evdev input driver
local/xf86-input-libinput 0.27.1-1 (xorg-drivers)
    Generic input driver for the X.Org server based on libinput
local/xorg-server 1.20.0-5 (xorg)
    Xorg X server
local/xorg-xinput 1.6.2-2 (xorg-apps xorg)
    Small commandline tool to configure devices
local/xorgproto 2018.4-1
    combined X.Org X11 Protocol headers

I have one Xorg config file, `30-touchpad.conf`: 

Section "InputClass"
        Identifier "touchpad"
                Driver "libinput"
        MatchIsTouchpad "on"
        Option "tapping" "on"
        Option "AccelProfile" "adaptive"
        Option "TappingButtonMap" "lrm"
EndSection

Last edited by mrinalabrol (2018-06-08 15:48:35)

Offline

#4 2018-06-08 18:29:28

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,849

Re: No keyboard or mouse input after login into Gnome

Please post your xorg log and the output of "xinput"

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2018-06-08 19:02:30

mrinalabrol
Member
Registered: 2016-12-04
Posts: 3

Re: No keyboard or mouse input after login into Gnome

@seth, here's the Xorg log: 

[    39.241] (--) Log file renamed from "/var/log/Xorg.pid-569.log" to "/var/log/Xorg.0.log"
[    39.248] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    39.248] X Protocol Version 11, Revision 0
[    39.248] Build Operating System: Linux 4.5.4-1-ARCH x86_64 
[    39.248] Current Operating System: Linux localhost.localdomain 4.8.11-1-ARCH #1 SMP PREEMPT Sun Nov 27 09:26:14 CET 2016 x86_64
[    39.248] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cf707601-35fa-4b72-9ff7-d212561aca98 rw quiet
[    39.248] Build Date: 19 July 2016  05:54:24PM
[    39.248]  
[    39.248] Current version of pixman: 0.34.0
[    39.248] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    39.248] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    39.249] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec  4 23:18:32 2016
[    39.282] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    39.282] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    39.435] (==) No Layout section.  Using the first Screen section.
[    39.435] (==) No screen section available. Using defaults.
[    39.435] (**) |-->Screen "Default Screen Section" (0)
[    39.435] (**) |   |-->Monitor "<default monitor>"
[    39.436] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    39.436] (==) Automatically adding devices
[    39.436] (==) Automatically enabling devices
[    39.436] (==) Automatically adding GPU devices
[    39.436] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    39.436] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    39.436] 	Entry deleted from font path.
[    39.436] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    39.436] 	Entry deleted from font path.
[    39.436] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    39.436] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    39.436] 	Entry deleted from font path.
[    39.436] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    39.436] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    39.436] (==) ModulePath set to "/usr/lib/xorg/modules"
[    39.436] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    39.436] (II) Loader magic: 0x821d40
[    39.436] (II) Module ABI versions:
[    39.436] 	X.Org ANSI C Emulation: 0.4
[    39.436] 	X.Org Video Driver: 20.0
[    39.436] 	X.Org XInput driver : 22.1
[    39.436] 	X.Org Server Extension : 9.0
[    39.437] (++) using VT number 2

[    39.438] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[    39.439] (II) xfree86: Adding drm device (/dev/dri/card1)
[    39.439] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[    39.439] (II) xfree86: Adding drm device (/dev/dri/card0)
[    39.439] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[    39.442] (--) PCI:*(0:0:2:0) 8086:1616:103c:8096 rev 9, Mem @ 0xc3000000/16777216, 0xd0000000/268435456, I/O @ 0x00007000/64, BIOS @ 0x????????/131072
[    39.442] (--) PCI: (0:10:0:0) 10de:1347:103c:8096 rev 162, Mem @ 0xc4000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128
[    39.442] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    39.442] (II) LoadModule: "glx"
[    39.456] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    39.473] (II) Module glx: vendor="X.Org Foundation"
[    39.473] 	compiled for 1.18.4, module version = 1.0.0
[    39.473] 	ABI class: X.Org Server Extension, version 9.0
[    39.473] (==) AIGLX enabled
[    39.473] (==) Matched intel as autoconfigured driver 0
[    39.473] (==) Matched nouveau as autoconfigured driver 1
[    39.473] (==) Matched nv as autoconfigured driver 2
[    39.473] (==) Matched intel as autoconfigured driver 3
[    39.473] (==) Matched modesetting as autoconfigured driver 4
[    39.473] (==) Matched fbdev as autoconfigured driver 5
[    39.473] (==) Matched vesa as autoconfigured driver 6
[    39.473] (==) Assigned the driver to the xf86ConfigLayout
[    39.473] (II) LoadModule: "intel"
[    39.484] (WW) Warning, couldn't open module intel
[    39.484] (II) UnloadModule: "intel"
[    39.484] (II) Unloading intel
[    39.484] (EE) Failed to load module "intel" (module does not exist, 0)
[    39.484] (II) LoadModule: "nouveau"
[    39.485] (WW) Warning, couldn't open module nouveau
[    39.485] (II) UnloadModule: "nouveau"
[    39.485] (II) Unloading nouveau
[    39.485] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    39.485] (II) LoadModule: "nv"
[    39.485] (WW) Warning, couldn't open module nv
[    39.485] (II) UnloadModule: "nv"
[    39.485] (II) Unloading nv
[    39.485] (EE) Failed to load module "nv" (module does not exist, 0)
[    39.485] (II) LoadModule: "modesetting"
[    39.485] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    39.485] (II) Module modesetting: vendor="X.Org Foundation"
[    39.485] 	compiled for 1.18.4, module version = 1.18.4
[    39.485] 	Module class: X.Org Video Driver
[    39.485] 	ABI class: X.Org Video Driver, version 20.0
[    39.485] (II) LoadModule: "fbdev"
[    39.485] (WW) Warning, couldn't open module fbdev
[    39.485] (II) UnloadModule: "fbdev"
[    39.485] (II) Unloading fbdev
[    39.485] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    39.485] (II) LoadModule: "vesa"
[    39.485] (WW) Warning, couldn't open module vesa
[    39.485] (II) UnloadModule: "vesa"
[    39.485] (II) Unloading vesa
[    39.486] (EE) Failed to load module "vesa" (module does not exist, 0)
[    39.486] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    39.486] (II) modeset(0): using drv /dev/dri/card1
[    39.486] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    39.486] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    39.486] (==) modeset(0): RGB weight 888
[    39.486] (==) modeset(0): Default visual is TrueColor
[    39.486] (II) Loading sub module "glamoregl"
[    39.486] (II) LoadModule: "glamoregl"
[    39.486] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    39.531] (II) Module glamoregl: vendor="X.Org Foundation"
[    39.531] 	compiled for 1.18.4, module version = 1.0.0
[    39.531] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    39.531] (II) glamor: OpenGL accelerated X.org driver based.
[    39.540] (II) glamor: EGL version 1.4 (DRI2):
[    39.541] (II) modeset(0): glamor initialized
[    39.542] (II) modeset(0): Output eDP-1 has no monitor section
[    39.543] (II) modeset(0): Output HDMI-1 has no monitor section
[    39.543] (II) modeset(0): EDID for output eDP-1
[    39.543] (II) modeset(0): Manufacturer: CMN  Model: 15c4  Serial#: 0
[    39.543] (II) modeset(0): Year: 2014  Week: 38
[    39.543] (II) modeset(0): EDID Version: 1.4
[    39.543] (II) modeset(0): Digital Display Input
[    39.543] (II) modeset(0): 6 bits per channel
[    39.543] (II) modeset(0): Digital interface is DisplayPort
[    39.543] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    39.543] (II) modeset(0): Gamma: 2.20
[    39.543] (II) modeset(0): No DPMS capabilities specified
[    39.543] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[    39.543] (II) modeset(0): First detailed timing is preferred mode
[    39.543] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    39.543] (II) modeset(0): redX: 0.565 redY: 0.330   greenX: 0.323 greenY: 0.577
[    39.543] (II) modeset(0): blueX: 0.160 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
[    39.543] (II) modeset(0): Manufacturer's mask: 0
[    39.543] (II) modeset(0): Supported detailed timing:
[    39.543] (II) modeset(0): clock: 152.8 MHz   Image Size:  344 x 193 mm
[    39.543] (II) modeset(0): h_active: 1920  h_sync: 2020  h_sync_end 2086 h_blank_end 2250 h_border: 0
[    39.543] (II) modeset(0): v_active: 1080  v_sync: 1086  v_sync_end 1096 v_blanking: 1132 v_border: 0
[    39.543] (II) modeset(0): Supported detailed timing:
[    39.543] (II) modeset(0): clock: 101.9 MHz   Image Size:  344 x 193 mm
[    39.543] (II) modeset(0): h_active: 1920  h_sync: 2020  h_sync_end 2086 h_blank_end 2250 h_border: 0
[    39.543] (II) modeset(0): v_active: 1080  v_sync: 1086  v_sync_end 1096 v_blanking: 1132 v_border: 0
[    39.543] (II) modeset(0): Unknown vendor-specific block 2
[    39.543] (II) modeset(0): EDID (in hex):
[    39.543] (II) modeset(0): 	00ffffffffffff000daec41500000000
[    39.543] (II) modeset(0): 	261801049522137802ef059054529329
[    39.543] (II) modeset(0): 	25505400000001010101010101010101
[    39.543] (II) modeset(0): 	010101010101b43b804a713834406442
[    39.543] (II) modeset(0): 	6a0058c11000001acd27804a71383440
[    39.543] (II) modeset(0): 	64426a0058c11000001a000000000000
[    39.543] (II) modeset(0): 	00000000000000000000000000000002
[    39.543] (II) modeset(0): 	000c44ff0b3c6e13101f6e000000001f
[    39.543] (II) modeset(0): Printing probed modes for output eDP-1
[    39.543] (II) modeset(0): Modeline "1920x1080"x60.0  152.84  1920 2020 2086 2250  1080 1086 1096 1132 +hsync -vsync (67.9 kHz eP)
[    39.543] (II) modeset(0): Modeline "1920x1080"x40.0  101.89  1920 2020 2086 2250  1080 1086 1096 1132 +hsync -vsync (45.3 kHz e)
[    39.543] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    39.543] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    39.543] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    39.543] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    39.543] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    39.543] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    39.543] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    39.543] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    39.543] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    39.543] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    39.543] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    39.543] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    39.543] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    39.543] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    39.543] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    39.543] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    39.543] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    39.543] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    39.543] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    39.544] (II) modeset(0): EDID for output HDMI-1
[    39.544] (II) modeset(0): Output eDP-1 connected
[    39.544] (II) modeset(0): Output HDMI-1 disconnected
[    39.544] (II) modeset(0): Using exact sizes for initial modes
[    39.544] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[    39.544] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    39.544] (==) modeset(0): DPI set to (96, 96)
[    39.544] (II) Loading sub module "fb"
[    39.544] (II) LoadModule: "fb"
[    39.544] (II) Loading /usr/lib/xorg/modules/libfb.so
[    39.615] (II) Module fb: vendor="X.Org Foundation"
[    39.615] 	compiled for 1.18.4, module version = 1.0.0
[    39.615] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    39.615] (==) Depth 24 pixmap format is 32 bpp
[    39.732] (==) modeset(0): Backing store enabled
[    39.732] (==) modeset(0): Silken mouse enabled
[    39.782] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    39.797] (==) modeset(0): DPMS enabled
[    39.797] (II) modeset(0): [DRI2] Setup complete
[    39.797] (II) modeset(0): [DRI2]   DRI driver: i965
[    39.797] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    39.834] (--) RandR disabled
[    39.855] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    39.855] (II) AIGLX: enabled GLX_ARB_create_context
[    39.855] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    39.855] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    39.855] (II) AIGLX: enabled GLX_INTEL_swap_event
[    39.855] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    39.855] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    39.855] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    39.855] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    39.855] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    39.855] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    39.855] (II) AIGLX: Loaded and initialized i965
[    39.855] (II) GLX: Initialized DRI2 GL provider for screen 0
[    39.901] (II) modeset(0): Damage tracking initialized
[    39.901] (II) modeset(0): Setting screen physical size to 508 x 285
[    39.928] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    39.928] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    39.929] (II) LoadModule: "evdev"
[    39.929] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    39.968] (II) Module evdev: vendor="X.Org Foundation"
[    39.968] 	compiled for 1.18.4, module version = 2.10.4
[    39.968] 	Module class: X.Org XInput Driver
[    39.968] 	ABI class: X.Org XInput driver, version 22.1
[    39.969] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
[    39.969] (II) Using input driver 'evdev' for 'Power Button'
[    39.969] (**) Power Button: always reports core events
[    39.969] (**) evdev: Power Button: Device: "/dev/input/event3"
[    39.969] (--) evdev: Power Button: Vendor 0 Product 0x1
[    39.969] (--) evdev: Power Button: Found keys
[    39.969] (II) evdev: Power Button: Configuring as keyboard
[    39.969] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[    39.969] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    39.969] (**) Option "xkb_rules" "evdev"
[    39.969] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    39.969] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    39.970] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 18 paused 0
[    39.970] (II) Using input driver 'evdev' for 'Video Bus'
[    39.970] (**) Video Bus: always reports core events
[    39.970] (**) evdev: Video Bus: Device: "/dev/input/event13"
[    39.970] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    39.970] (--) evdev: Video Bus: Found keys
[    39.970] (II) evdev: Video Bus: Configuring as keyboard
[    39.970] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event13"
[    39.970] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    39.970] (**) Option "xkb_rules" "evdev"
[    39.970] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[    39.970] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    39.971] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 19 paused 0
[    39.971] (II) Using input driver 'evdev' for 'Video Bus'
[    39.971] (**) Video Bus: always reports core events
[    39.971] (**) evdev: Video Bus: Device: "/dev/input/event14"
[    39.971] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    39.971] (--) evdev: Video Bus: Found keys
[    39.971] (II) evdev: Video Bus: Configuring as keyboard
[    39.971] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:01/input/input15/event14"
[    39.971] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    39.971] (**) Option "xkb_rules" "evdev"
[    39.971] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    39.971] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    39.972] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 0
[    39.972] (II) Using input driver 'evdev' for 'Power Button'
[    39.972] (**) Power Button: always reports core events
[    39.972] (**) evdev: Power Button: Device: "/dev/input/event2"
[    39.972] (--) evdev: Power Button: Vendor 0 Product 0x1
[    39.972] (--) evdev: Power Button: Found keys
[    39.972] (II) evdev: Power Button: Configuring as keyboard
[    39.972] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    39.972] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    39.972] (**) Option "xkb_rules" "evdev"
[    39.972] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    39.972] (II) No input driver specified, ignoring this device.
[    39.972] (II) This device may have been added with another device file.
[    39.972] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event17)
[    39.972] (II) No input driver specified, ignoring this device.
[    39.972] (II) This device may have been added with another device file.
[    39.973] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[    39.973] (II) No input driver specified, ignoring this device.
[    39.973] (II) This device may have been added with another device file.
[    39.973] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event19)
[    39.973] (II) No input driver specified, ignoring this device.
[    39.973] (II) This device may have been added with another device file.
[    39.973] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event16)
[    39.973] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[    39.974] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 21 paused 0
[    39.974] (II) Using input driver 'evdev' for 'HP Truevision HD'
[    39.974] (**) HP Truevision HD: always reports core events
[    39.974] (**) evdev: HP Truevision HD: Device: "/dev/input/event16"
[    39.974] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x379
[    39.974] (--) evdev: HP Truevision HD: Found keys
[    39.974] (II) evdev: HP Truevision HD: Configuring as keyboard
[    39.974] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input17/event16"
[    39.974] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 10)
[    39.974] (**) Option "xkb_rules" "evdev"
[    39.974] (II) config/udev: Adding input device PixArt Gaming Mouse (/dev/input/event11)
[    39.974] (**) PixArt Gaming Mouse: Applying InputClass "evdev pointer catchall"
[    40.030] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 22 paused 0
[    40.030] (II) Using input driver 'evdev' for 'PixArt Gaming Mouse'
[    40.030] (**) PixArt Gaming Mouse: always reports core events
[    40.030] (**) evdev: PixArt Gaming Mouse: Device: "/dev/input/event11"
[    40.030] (--) evdev: PixArt Gaming Mouse: Vendor 0x93a Product 0x2532
[    40.030] (--) evdev: PixArt Gaming Mouse: Found 9 mouse buttons
[    40.030] (--) evdev: PixArt Gaming Mouse: Found scroll wheel(s)
[    40.030] (--) evdev: PixArt Gaming Mouse: Found relative axes
[    40.030] (--) evdev: PixArt Gaming Mouse: Found x and y relative axes
[    40.030] (II) evdev: PixArt Gaming Mouse: Configuring as mouse
[    40.030] (II) evdev: PixArt Gaming Mouse: Adding scrollwheel support
[    40.030] (**) evdev: PixArt Gaming Mouse: YAxisMapping: buttons 4 and 5
[    40.030] (**) evdev: PixArt Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    40.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:093A:2532.0001/input/input12/event11"
[    40.030] (II) XINPUT: Adding extended input device "PixArt Gaming Mouse" (type: MOUSE, id 11)
[    40.030] (II) evdev: PixArt Gaming Mouse: initialized for relative axes.
[    40.030] (**) PixArt Gaming Mouse: (accel) keeping acceleration scheme 1
[    40.030] (**) PixArt Gaming Mouse: (accel) acceleration profile 0
[    40.030] (**) PixArt Gaming Mouse: (accel) acceleration factor: 2.000
[    40.030] (**) PixArt Gaming Mouse: (accel) acceleration threshold: 4
[    40.031] (II) config/udev: Adding input device PixArt Gaming Mouse (/dev/input/mouse1)
[    40.031] (II) No input driver specified, ignoring this device.
[    40.031] (II) This device may have been added with another device file.
[    40.031] (II) config/udev: Adding input device PixArt Gaming Mouse (/dev/input/event12)
[    40.031] (**) PixArt Gaming Mouse: Applying InputClass "evdev keyboard catchall"
[    40.031] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 23 paused 0
[    40.031] (II) Using input driver 'evdev' for 'PixArt Gaming Mouse'
[    40.031] (**) PixArt Gaming Mouse: always reports core events
[    40.031] (**) evdev: PixArt Gaming Mouse: Device: "/dev/input/event12"
[    40.032] (--) evdev: PixArt Gaming Mouse: Vendor 0x93a Product 0x2532
[    40.032] (--) evdev: PixArt Gaming Mouse: Found 1 mouse buttons
[    40.032] (--) evdev: PixArt Gaming Mouse: Found scroll wheel(s)
[    40.032] (--) evdev: PixArt Gaming Mouse: Found relative axes
[    40.032] (II) evdev: PixArt Gaming Mouse: Forcing relative x/y axes to exist.
[    40.032] (--) evdev: PixArt Gaming Mouse: Found absolute axes
[    40.032] (II) evdev: PixArt Gaming Mouse: Forcing absolute x/y axes to exist.
[    40.032] (--) evdev: PixArt Gaming Mouse: Found keys
[    40.032] (II) evdev: PixArt Gaming Mouse: Configuring as mouse
[    40.032] (II) evdev: PixArt Gaming Mouse: Configuring as keyboard
[    40.032] (II) evdev: PixArt Gaming Mouse: Adding scrollwheel support
[    40.032] (**) evdev: PixArt Gaming Mouse: YAxisMapping: buttons 4 and 5
[    40.032] (**) evdev: PixArt Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    40.032] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:093A:2532.0002/input/input13/event12"
[    40.032] (II) XINPUT: Adding extended input device "PixArt Gaming Mouse" (type: KEYBOARD, id 12)
[    40.032] (**) Option "xkb_rules" "evdev"
[    40.032] (II) evdev: PixArt Gaming Mouse: initialized for relative axes.
[    40.032] (WW) evdev: PixArt Gaming Mouse: ignoring absolute axes.
[    40.032] (**) PixArt Gaming Mouse: (accel) keeping acceleration scheme 1
[    40.032] (**) PixArt Gaming Mouse: (accel) acceleration profile 0
[    40.032] (**) PixArt Gaming Mouse: (accel) acceleration factor: 2.000
[    40.032] (**) PixArt Gaming Mouse: (accel) acceleration threshold: 4
[    40.032] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[    40.032] (II) No input driver specified, ignoring this device.
[    40.032] (II) This device may have been added with another device file.
[    40.032] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    40.032] (II) No input driver specified, ignoring this device.
[    40.032] (II) This device may have been added with another device file.
[    40.032] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[    40.032] (II) No input driver specified, ignoring this device.
[    40.032] (II) This device may have been added with another device file.
[    40.033] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    40.033] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    40.033] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 24 paused 0
[    40.033] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    40.033] (**) AT Translated Set 2 keyboard: always reports core events
[    40.033] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    40.033] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    40.033] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    40.033] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    40.033] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    40.033] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    40.033] (**) Option "xkb_rules" "evdev"
[    40.034] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[    40.034] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    40.034] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    40.034] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    40.034] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    40.034] (II) LoadModule: "synaptics"
[    40.034] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    40.078] (II) Module synaptics: vendor="X.Org Foundation"
[    40.078] 	compiled for 1.18.3, module version = 1.8.99
[    40.078] 	Module class: X.Org XInput Driver
[    40.078] 	ABI class: X.Org XInput driver, version 22.1
[    40.078] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 25 paused 0
[    40.078] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    40.078] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    40.078] (**) Option "Device" "/dev/input/event10"
[    40.079] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[    40.079] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1326 - 5656 (res 41)
[    40.079] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1200 - 4712 (res 58)
[    40.079] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    40.079] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    40.079] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[    40.079] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    40.079] (**) Option "VertEdgeScroll" "on"
[    40.079] (**) Option "HorizEdgeScroll" "on"
[    40.079] (**) Option "VertTwoFingerScroll" "on"
[    40.079] (**) Option "HorizTwoFingerScroll" "on"
[    40.079] (**) Option "TapButton1" "1"
[    40.079] (**) Option "TapButton2" "3"
[    40.079] (**) Option "TapButton3" "2"
[    40.079] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    40.079] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    40.079] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    40.079] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event10"
[    40.079] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    40.079] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    40.079] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    40.079] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[    40.079] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    40.079] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    40.079] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    40.079] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    40.079] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    40.079] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    40.079] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    40.079] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event9)
[    40.079] (II) No input driver specified, ignoring this device.
[    40.079] (II) This device may have been added with another device file.
[    40.080] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    40.080] (II) No input driver specified, ignoring this device.
[    40.080] (II) This device may have been added with another device file.
[    40.080] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    40.080] (II) No input driver specified, ignoring this device.
[    40.080] (II) This device may have been added with another device file.
[    40.080] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event15)
[    40.080] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    40.080] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 26 paused 0
[    40.080] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    40.080] (**) HP WMI hotkeys: always reports core events
[    40.081] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event15"
[    40.081] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    40.081] (--) evdev: HP WMI hotkeys: Found keys
[    40.081] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    40.081] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event15"
[    40.081] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[    40.081] (**) Option "xkb_rules" "evdev"
[    40.081] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4)
[    40.081] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[    40.081] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[    40.081] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[    40.081] (**) HP Wireless hotkeys: always reports core events
[    40.081] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event4"
[    40.081] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[    40.081] (--) evdev: HP Wireless hotkeys: Found keys
[    40.081] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[    40.081] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event4"
[    40.081] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 16)
[    40.081] (**) Option "xkb_rules" "evdev"
[    41.648] (II) modeset(0): EDID vendor "CMN", prod id 5572
[    41.648] (II) modeset(0): Printing DDC gathered Modelines:
[    41.648] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 2020 2086 2250  1080 1086 1096 1132 +hsync -vsync (67.9 kHz eP)
[    41.648] (II) modeset(0): Modeline "1920x1080"x0.0  101.89  1920 2020 2086 2250  1080 1086 1096 1132 +hsync -vsync (45.3 kHz e)
[    47.067] (II) modeset(0): EDID vendor "CMN", prod id 5572
[    47.067] (II) modeset(0): Printing DDC gathered Modelines:
[    47.067] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 2020 2086 2250  1080 1086 1096 1132 +hsync -vsync (67.9 kHz eP)
[    47.067] (II) modeset(0): Modeline "1920x1080"x0.0  101.89  1920 2020 2086 2250  1080 1086 1096 1132 +hsync -vsync (45.3 kHz e)
[  2318.824] (II) evdev: HP Wireless hotkeys: Close
[  2318.824] (II) UnloadModule: "evdev"
[  2318.824] (II) systemd-logind: releasing fd for 13:68
[  2318.946] (II) evdev: HP WMI hotkeys: Close
[  2318.946] (II) UnloadModule: "evdev"
[  2318.946] (II) systemd-logind: releasing fd for 13:79
[  2318.966] (II) UnloadModule: "synaptics"
[  2318.966] (II) systemd-logind: releasing fd for 13:74
[  2319.006] (II) evdev: AT Translated Set 2 keyboard: Close
[  2319.006] (II) UnloadModule: "evdev"
[  2319.006] (II) systemd-logind: releasing fd for 13:64
[  2319.049] (II) evdev: PixArt Gaming Mouse: Close
[  2319.049] (II) UnloadModule: "evdev"
[  2319.049] (II) systemd-logind: releasing fd for 13:76
[  2319.083] (II) evdev: PixArt Gaming Mouse: Close
[  2319.083] (II) UnloadModule: "evdev"
[  2319.083] (II) systemd-logind: releasing fd for 13:75
[  2319.129] (II) evdev: HP Truevision HD: Close
[  2319.129] (II) UnloadModule: "evdev"
[  2319.129] (II) systemd-logind: releasing fd for 13:80
[  2319.159] (II) evdev: Power Button: Close
[  2319.159] (II) UnloadModule: "evdev"
[  2319.159] (II) systemd-logind: releasing fd for 13:66
[  2319.176] (II) evdev: Video Bus: Close
[  2319.176] (II) UnloadModule: "evdev"
[  2319.176] (II) systemd-logind: releasing fd for 13:78
[  2319.196] (II) evdev: Video Bus: Close
[  2319.196] (II) UnloadModule: "evdev"
[  2319.196] (II) systemd-logind: releasing fd for 13:77
[  2319.216] (II) evdev: Power Button: Close
[  2319.216] (II) UnloadModule: "evdev"
[  2319.216] (II) systemd-logind: releasing fd for 13:67
[  2319.237] (EE) 
[  2319.237] (EE) Backtrace:
[  2319.237] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x139) [0x59cd49]
[  2319.297] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7f6f7923c0af]
[  2319.298] (EE) 2: /usr/lib/xorg/modules/libfb.so (_fbGetWindowPixmap+0xd) [0x7f6f71ea28ed]
[  2319.332] (EE) 3: /usr/lib/xorg-server/Xorg (present_extension_init+0x5b7) [0x518e27]
[  2319.332] (EE) 4: /usr/lib/xorg-server/Xorg (present_extension_init+0x685) [0x519005]
[  2319.333] (EE) 5: /usr/lib/xorg-server/Xorg (present_extension_init+0xdf2) [0x519ed2]
[  2319.333] (EE) 6: /usr/lib/xorg-server/Xorg (AddTraps+0x9133) [0x520de3]
[  2319.333] (EE) 7: /usr/lib/xorg-server/Xorg (CompositeRegisterImplicitRedirectionException+0x4098) [0x4ccf48]
[  2319.333] (EE) 8: /usr/lib/xorg-server/Xorg (AddTraps+0x73f4) [0x51d2f4]
[  2319.333] (EE) 9: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x581) [0x43a911]
[  2319.334] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xf1) [0x7f6f79229291]
[  2319.334] (EE) 11: /usr/lib/xorg-server/Xorg (_start+0x29) [0x4246e9]
[  2319.335] (EE) 12: ? (?+0x29) [0x29]
[  2319.335] (EE) 
[  2319.335] (EE) Segmentation fault at address 0x10
[  2319.335] (EE) 
Fatal server error:
[  2319.335] (EE) Caught signal 11 (Segmentation fault). Server aborting
[  2319.335] (EE) 
[  2319.335] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  2319.335] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  2319.335] (EE) 
[  2319.335] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[  2319.335] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[  2319.335] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[  2319.664] (EE) Server terminated with error (1). Closing log file.

and the output for `xinput`: 

⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Logitech G102 Prodigy Gaming Mouse      	id=10	[slave  pointer  (2)]
⎜   ↳ Logitech G102 Prodigy Gaming Mouse      	id=11	[slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                   	id=13	[slave  pointer  (2)]
⎜   ↳ SynPS/2 Synaptics TouchPad              	id=16	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Video Bus                               	id=8	[slave  keyboard (3)]
    ↳ Power Button                            	id=9	[slave  keyboard (3)]
    ↳ Logitech USB Receiver                   	id=12	[slave  keyboard (3)]
    ↳ HP Truevision HD: HP Truevision         	id=14	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=15	[slave  keyboard (3)]
    ↳ HP WMI hotkeys                          	id=17	[slave  keyboard (3)]
    ↳ HP Wireless hotkeys                     	id=18	[slave  keyboard (3)]
    ↳ Logitech G102 Prodigy Gaming Mouse      	id=19	[slave  keyboard (3)]
    ↳ Logitech USB Receiver                   	id=20	[slave  keyboard (3)]

Offline

#6 2018-06-08 19:11:40

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,849

Re: No keyboard or mouse input after login into Gnome

1st off, since you're probably using GDM, force it to use Xorg as well, to prevent interference between the display servers:
https://wiki.archlinux.org/index.php/GD … rg_backend

Next, try w/o the "gaming mouse" (they do all kinds of mess) and if that doesn't change anything, ultimately remove xf86-input-evdev to check the xf86-input-libinput behavior.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB