No sound in archlinux

Tyloo_NO_1 · 2018-06-18 04:09:49

I have tried every methods of internet even have no sound.
according to https://bbs.archlinux.org/viewtopic.php?id=170241&p=2

I post the alsa debug info at: http://www.alsa-project.org/db/?f=3ff76 … 927c3afed6

and output of lspci -nn is:

00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5910] (rev 05)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 05)
00:04.0 Signal processing controller [1180]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [8086:1903] (rev 05)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] [8086:a103] (rev 31)
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1)
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #5 [8086:a114] (rev f1)
00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #6 [8086:a115] (rev f1)
00:1c.6 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #7 [8086:a116] (rev f1)
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #9 [8086:a118] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a152] (rev 31)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
00:1f.3 Audio device [0403]: Intel Corporation CM238 HD Audio Controller [8086:a171] (rev 31)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP104M [GeForce GTX 1070 Mobile] [10de:1be1] (rev a1)
01:00.1 Audio device [0403]: NVIDIA Corporation GP104 High Definition Audio Controller [10de:10f0] (rev a1)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader [10ec:522a] (rev 01)
04:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095a] (rev 61)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
06:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804]

I have installed alsa and pulseaudio accroding to archlinux installation guide, and also installed pavucontrol and I can see output is correctly in tabs Playback and OutputDevices, that is:

Last edited by Tyloo_NO_1 (2018-06-18 04:24:40)

jasonwryan · 2018-06-18 04:11:02

Read the Code of Conduct and only post thumbnails http://wiki.archlinux.org/index.php/Cod … s_and_code

Moving to NC...

Tyloo_NO_1 · 2018-06-18 05:14:20

Hey guys, I just ran alsabat-test.sh and I solved this, but what the problem is?

Last edited by Tyloo_NO_1 (2018-06-18 05:14:49)

seth · 2018-06-18 05:18:09

I have installed alsa and pulseaudio accroding to archlinux installation guide

Then why is jackd running as well?

pacman -Qi pulseaudio

Rule #1 to debug sound related issues: stop all sound daemons, check the mixer states and whether you get sound w/ only alsa.

Tyloo_NO_1 · 2018-06-18 13:17:18

seth wrote:

I have installed alsa and pulseaudio accroding to archlinux installation guide
Then why is jackd running as well?
pacman -Qi pulseaudio
Rule #1 to debug sound related issues: stop all sound daemons, check the mixer states and whether you get sound w/ only alsa.

they couldn't live together in arch linux?

seth · 2018-06-18 13:20:34

Of course they can, but you stated to have installed alsa and PA and didn't mention the jack installation (and how you chained PA and Jack) at all…

Tyloo_NO_1 · 2018-06-19 12:37:17

seth wrote:

Of course they can, but you stated to have installed alsa and PA and didn't mention the jack installation (and how you chained PA and Jack) at all…

Uhh...I have windows 10 and archlinux installed on a laptop, and I found that if I boot into windows 10 and next time when I boot into archlinux there is no audio any more...What The...?Is that windows 10 do something about sound card?
And I can run alsabat-test.sh to obain audio again.

seth · 2018-06-19 13:12:15

https://www.tenforums.com/tutorials/418 … -10-a.html

Tyloo_NO_1 · 2018-07-08 07:29:53

seth wrote:

https://www.tenforums.com/tutorials/418 … -10-a.html

thx, that should be the perfect solution.

Last edited by Tyloo_NO_1 (2018-07-08 07:33:02)

Arch Linux

#1 2018-06-18 04:09:49

No sound in archlinux

#2 2018-06-18 04:11:02

Re: No sound in archlinux

#3 2018-06-18 05:14:20

Re: No sound in archlinux

#4 2018-06-18 05:18:09

Re: No sound in archlinux

#5 2018-06-18 13:17:18

Re: No sound in archlinux

#6 2018-06-18 13:20:34

Re: No sound in archlinux

#7 2018-06-19 12:37:17

Re: No sound in archlinux

#8 2018-06-19 13:12:15

Re: No sound in archlinux

#9 2018-07-08 07:29:53

Re: No sound in archlinux

Board footer