You are not logged in.

#1 2018-06-19 12:17:13

berturion
Member
Registered: 2018-06-19
Posts: 22

[SOLVED] No mouse nor keyboard in ASUS laptop since Kernel 4.17.2-1

Hi there,
Since the installation of the last kernel 4.17.2-1, when I am on LightDM, I can't type my password and I can't move my mouse from touchepad. If I plug a wireless keyboard+mouse it works.
If I install linux-lts package, and boot from it everything works.

Here is dmesg with kernel 4.17.2-1:

[    0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16
[    0.000000] Linux version 4.17.2-1-ARCH (builduser@heftig-9574) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Sat Jun 16 11:08:59 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4f2d77c5-f763-4d59-97d5-a160eabcae7e rw quiet splash pci=noaer resume=UUID=966bc206-9f53-442c-bf3c-e12d6d8d35f6
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000682aefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000682af000-0x00000000682affff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000682b0000-0x00000000682d9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000682da000-0x000000006832cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000006832d000-0x000000006876dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006876e000-0x0000000075207fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000075208000-0x0000000075ee6fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000075ee7000-0x0000000076282fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000076283000-0x000000007711dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007711e000-0x0000000077f87fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077f88000-0x0000000077ffdfff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000077ffe000-0x0000000077ffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000283ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ESRT=0x77ec7e18  ACPI=0x76387000  ACPI 2.0=0x76387000  SMBIOS=0xf05e0  SMBIOS 3.0=0xf0600  MPS=0xfca50 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. K501UX/K501UX, BIOS K501UX.209 01/20/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x284000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007A000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 0079000000 mask 7FFF000000 uncachable
[    0.000000]   4 base 0078800000 mask 7FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x77fff max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc90-0x000fcc9f] mapped at [        (ptrval)]
[    0.000000] esrt: Reserving ESRT space from 0x0000000077ec7e18 to 0x0000000077ec7e50.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1de660000, 0x1de660fff] PGTABLE
[    0.000000] BRK [0x1de661000, 0x1de661fff] PGTABLE
[    0.000000] BRK [0x1de662000, 0x1de662fff] PGTABLE
[    0.000000] BRK [0x1de663000, 0x1de663fff] PGTABLE
[    0.000000] BRK [0x1de664000, 0x1de664fff] PGTABLE
[    0.000000] BRK [0x1de665000, 0x1de665fff] PGTABLE
[    0.000000] BRK [0x1de666000, 0x1de666fff] PGTABLE
[    0.000000] BRK [0x1de667000, 0x1de667fff] PGTABLE
[    0.000000] BRK [0x1de668000, 0x1de668fff] PGTABLE
[    0.000000] BRK [0x1de669000, 0x1de669fff] PGTABLE
[    0.000000] BRK [0x1de66a000, 0x1de66afff] PGTABLE
[    0.000000] BRK [0x1de66b000, 0x1de66bfff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x36e75000-0x37731fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000076387000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000763870B0 0000E4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000763ABF68 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x0000000076387228 024D3F (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000007711CF80 000040
[    0.000000] ACPI: APIC 0x00000000763AC078 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000763AC100 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000763AC148 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000763AC1E8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000763AC228 000038 (v01 _ASUS_ Notebook 01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x00000000763AC260 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: ECDT 0x00000000763AC578 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: LPIT 0x00000000763AC640 000094 (v01 INTEL  SKL-ULT  00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000763AC6D8 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.000000] ACPI: DBGP 0x00000000763AC920 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x00000000763AC958 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000763AC9B0 003D5F (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000763B0710 005882 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000763B5F98 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x00000000763B5FE0 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: BGRT 0x00000000763B6E38 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000763B6E70 0007B3 (v02 SgRef  SgPch    00001000 INTL 20120913)
[    0.000000] ACPI: DMAR 0x00000000763B7628 0000F0 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.000000] ACPI: UEFI 0x00000000763B7718 00063A (v01 INTEL  RstSataE 00000000 ??   00000000)
[    0.000000] ACPI: UEFI 0x00000000763B7D58 00005C (v01 INTEL  RstSataV 00000000 ??   00000000)
[    0.000000] ACPI: TPM2 0x00000000763B7DB8 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x00000000763B7DF0 001A7D (v01 OptRef OptTabl  00001000 INTL 20120913)
[    0.000000] ACPI: MSDM 0x0000000075CA8F18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000283ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x283ffc000-0x283ffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000283ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000682aefff]
[    0.000000]   node   0: [mem 0x00000000682da000-0x000000006832cfff]
[    0.000000]   node   0: [mem 0x000000006876e000-0x0000000075207fff]
[    0.000000]   node   0: [mem 0x0000000075ee7000-0x0000000076282fff]
[    0.000000]   node   0: [mem 0x0000000077ffe000-0x0000000077ffefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000283ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000283ffffff]
[    0.000000] On node 0 totalpages: 2068695
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 29 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7429 pages used for memmap
[    0.000000]   DMA32 zone: 475449 pages, LIFO batch:31
[    0.000000]   Normal zone: 24832 pages used for memmap
[    0.000000]   Normal zone: 1589248 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x79000000-0x7affffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x682af000-0x682affff]
[    0.000000] PM: Registered nosave memory: [mem 0x682b0000-0x682d9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6832d000-0x6876dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x75208000-0x75ee6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x76283000-0x7711dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7711e000-0x77f87fff]
[    0.000000] PM: Registered nosave memory: [mem 0x77f88000-0x77ffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x77fff000-0x77ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x79000000-0x7affffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7b000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2036341
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4f2d77c5-f763-4d59-97d5-a160eabcae7e rw quiet splash pci=noaer resume=UUID=966bc206-9f53-442c-bf3c-e12d6d8d35f6
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7998704K/8274780K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 276076K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 32647 entries in 128 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] DMAR: Host address width 39
[    0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.003333] DMAR: RMRR base: 0x00000075c88000 end: 0x00000075ca7fff
[    0.003333] DMAR: RMRR base: 0x00000078800000 end: 0x0000007affffff
[    0.003333] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.003333] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.003333] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.003333] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.003333] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.003333] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.003333] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.023333] tsc: Detected 2400.000 MHz processor
[    0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[    0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.00 BogoMIPS (lpj=8000000)
[    0.023333] pid_max: default: 32768 minimum: 301
[    0.023333] Security Framework initialized
[    0.023333] Yama: becoming mindful.
[    0.023333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.023333] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.023333] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.023333] CPU: Physical Processor ID: 0
[    0.023333] CPU: Processor Core ID: 0
[    0.023333] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.023333] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.023333] mce: CPU supports 8 MCE banks
[    0.023333] CPU0: Thermal monitoring enabled (TM1)
[    0.023333] process: using mwait in idle threads
[    0.023333] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.023333] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.023333] Spectre V2 : Mitigation: Full generic retpoline
[    0.023333] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.023333] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.023333] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.023333] Speculative Store Bypass: Vulnerable
[    0.029502] Freeing SMP alternatives memory: 28K
[    0.034452] TSC deadline timer enabled
[    0.034457] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[    0.050035] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.050174] ... version:                4
[    0.050175] ... bit width:              48
[    0.050175] ... generic registers:      4
[    0.050176] ... value mask:             0000ffffffffffff
[    0.050176] ... max period:             00007fffffffffff
[    0.050177] ... fixed-purpose events:   3
[    0.050177] ... event mask:             000000070000000f
[    0.053367] Hierarchical SRCU implementation.
[    0.063592] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.066714] smp: Bringing up secondary CPUs ...
[    0.090067] x86: Booting SMP configuration:
[    0.090074] .... node  #0, CPUs:      #1 #2 #3
[    0.137154] smp: Brought up 1 node, 4 CPUs
[    0.137154] smpboot: Max logical packages: 1
[    0.137154] smpboot: Total of 4 processors activated (19207.00 BogoMIPS)
[    0.140265] devtmpfs: initialized
[    0.140265] x86/mm: Memory block size: 128MB
[    0.140633] PM: Registering ACPI NVS region [mem 0x682af000-0x682affff] (4096 bytes)
[    0.140633] PM: Registering ACPI NVS region [mem 0x76283000-0x7711dfff] (15314944 bytes)
[    0.140633] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.140633] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.140633] pinctrl core: initialized pinctrl subsystem
[    0.140633] RTC time: 11:44:32, date: 06/19/18
[    0.140856] NET: Registered protocol family 16
[    0.141010] cpuidle: using governor ladder
[    0.141010] cpuidle: using governor menu
[    0.141010] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.141010] ACPI: bus type PCI registered
[    0.141010] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.141010] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.141010] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.141010] PCI: Using configuration type 1 for base access
[    0.143373] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.143373] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.143415] ACPI: Added _OSI(Module Device)
[    0.143416] ACPI: Added _OSI(Processor Device)
[    0.143417] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.143418] ACPI: Added _OSI(Processor Aggregator Device)
[    0.143419] ACPI: Added _OSI(Linux-Dell-Video)
[    0.143422] ACPI: EC: EC started
[    0.143422] ACPI: EC: interrupt blocked
[    0.143435] ACPI: \: Used as first EC
[    0.143437] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.143438] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.168314] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.RP01.PXSX], AE_NOT_FOUND (20180313/psargs-330)
[    0.168323] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180313/psparse-516)
[    0.168329] ACPI Error: Invalid zero thread count in method (20180313/dsmethod-760)
[    0.168332] ACPI Error: Invalid OwnerId: 0x00 (20180313/utownerid-156)
[    0.169787] ACPI Error: AE_NOT_FOUND, [DSDT] table load failed (20180313/tbxfload-167)
[    0.169813] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0], AE_NOT_FOUND (20180313/dswload2-160)
[    0.169818] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180313/psobject-220)
[    0.169822] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180313/psparse-516)
[    0.169827] ACPI Error: Invalid zero thread count in method (20180313/dsmethod-760)
[    0.169830] ACPI Error: Invalid OwnerId: 0x00 (20180313/utownerid-156)
[    0.169836] ACPI Error: AE_NOT_FOUND, (SSDT:SataTabl) while loading table (20180313/tbxfload-197)
[    0.169918] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.B0D4], AE_NOT_FOUND (20180313/dswload2-160)
[    0.169923] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180313/psobject-220)
[    0.169927] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180313/psparse-516)
[    0.169932] ACPI Error: Invalid zero thread count in method (20180313/dsmethod-760)
[    0.169935] ACPI Error: Invalid OwnerId: 0x00 (20180313/utownerid-156)
[    0.169946] ACPI Error: AE_NOT_FOUND, (SSDT:DptfTabl) while loading table (20180313/tbxfload-197)
[    0.170103] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0], AE_NOT_FOUND (20180313/dswload2-160)
[    0.170108] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180313/psobject-220)
[    0.170112] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180313/psparse-516)
[    0.170117] ACPI Error: Invalid zero thread count in method (20180313/dsmethod-760)
[    0.170120] ACPI Error: Invalid OwnerId: 0x00 (20180313/utownerid-156)
[    0.170155] ACPI Error: AE_NOT_FOUND, (SSDT: SaSsdt ) while loading table (20180313/tbxfload-197)
[    0.170286] ACPI BIOS Error (bug): Failure looking up [\_PR.CPU0], AE_NOT_FOUND (20180313/dswload2-160)
[    0.170291] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180313/psobject-220)
[    0.170295] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180313/psparse-516)
[    0.170300] ACPI Error: Invalid zero thread count in method (20180313/dsmethod-760)
[    0.170303] ACPI Error: Invalid OwnerId: 0x00 (20180313/utownerid-156)
[    0.170331] ACPI Error: AE_NOT_FOUND, (SSDT: CpuSsdt) while loading table (20180313/tbxfload-197)
[    0.170338] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.RP01], AE_NOT_FOUND (20180313/dswload2-160)
[    0.170342] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180313/psobject-220)
[    0.170346] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180313/psparse-516)
[    0.170351] ACPI Error: Invalid zero thread count in method (20180313/dsmethod-760)
[    0.170354] ACPI Error: Invalid OwnerId: 0x00 (20180313/utownerid-156)
[    0.170358] ACPI Error: AE_NOT_FOUND, (SSDT:   SgPch) while loading table (20180313/tbxfload-197)
[    0.170364] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0], AE_NOT_FOUND (20180313/dswload2-160)
[    0.170369] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180313/psobject-220)
[    0.170372] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180313/psparse-516)
[    0.170377] ACPI Error: Invalid zero thread count in method (20180313/dsmethod-760)
[    0.170380] ACPI Error: Invalid OwnerId: 0x00 (20180313/utownerid-156)
[    0.170385] ACPI Error: AE_NOT_FOUND, (SSDT: OptTabl) while loading table (20180313/tbxfload-197)
[    0.170388] ACPI Error: 7 table load failures, 1 successful (20180313/tbxfload-215)
[    0.170650] ACPI: Interpreter enabled
[    0.170656] ACPI: (supports S0)
[    0.170657] ACPI: Using IOAPIC for interrupt routing
[    0.170665] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.170783] ACPI BIOS Error (bug): Failure looking up [\SHAD._STA.SDS0], AE_NOT_FOUND (20180313/psargs-330)
[    0.170790] ACPI Error: Method parse/execution failed \SHAD._STA, AE_NOT_FOUND (20180313/psparse-516)
[    0.170826] ACPI BIOS Error (bug): Failure looking up [\SHAD._STA.SDS0], AE_NOT_FOUND (20180313/psargs-330)
[    0.170831] ACPI Error: Method parse/execution failed \SHAD._STA, AE_NOT_FOUND (20180313/psparse-516)
[    0.170901] vgaarb: loaded
[    0.170901] pps_core: LinuxPPS API ver. 1 registered
[    0.170901] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.170901] PTP clock support registered
[    0.170901] EDAC MC: Ver: 3.0.0
[    0.170901] Registered efivars operations
[    0.174986] PCI: Using ACPI for IRQ routing
[    0.174986] PCI: Discovered peer bus 00
[    0.174986] PCI: root bus 00: using default resources
[    0.174986] PCI: Probing PCI hardware (bus 00)
[    0.174986] PCI host bridge to bus 0000:00
[    0.174986] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.174986] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[    0.174986] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.174986] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.174986] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[    0.174986] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.174986] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.174986] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.174986] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.174986] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.174986] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.174986] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.174986] pci 0000:00:04.0: reg 0x10: [mem 0xdf320000-0xdf327fff 64bit]
[    0.174986] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.174986] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[    0.174986] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.174986] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.174986] pci 0000:00:14.2: reg 0x10: [mem 0xdf338000-0xdf338fff 64bit]
[    0.174986] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.174986] pci 0000:00:15.0: reg 0x10: [mem 0xdf337000-0xdf337fff 64bit]
[    0.176844] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.177107] pci 0000:00:15.1: reg 0x10: [mem 0xdf336000-0xdf336fff 64bit]
[    0.177984] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.178011] pci 0000:00:16.0: reg 0x10: [mem 0xdf335000-0xdf335fff 64bit]
[    0.178084] pci 0000:00:16.0: PME# supported from D3hot
[    0.178142] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400
[    0.178160] pci 0000:00:17.0: reg 0x10: [mem 0xdf330000-0xdf331fff]
[    0.178168] pci 0000:00:17.0: reg 0x14: [mem 0xdf334000-0xdf3340ff]
[    0.178176] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.178184] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.178192] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.178200] pci 0000:00:17.0: reg 0x24: [mem 0xdf333000-0xdf3337ff]
[    0.178238] pci 0000:00:17.0: PME# supported from D3hot
[    0.178288] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.178354] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.178412] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.178478] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.178525] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.178590] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.178651] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[    0.178789] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.178805] pci 0000:00:1f.2: reg 0x10: [mem 0xdf32c000-0xdf32ffff]
[    0.178889] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.178919] pci 0000:00:1f.3: reg 0x10: [mem 0xdf328000-0xdf32bfff 64bit]
[    0.178952] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[    0.179000] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.179046] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.179106] pci 0000:00:1f.4: reg 0x10: [mem 0xdf332000-0xdf3320ff 64bit]
[    0.179175] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.179312] pci 0000:01:00.0: [10de:139a] type 00 class 0x030200
[    0.179335] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.179348] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.179360] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.179368] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.179377] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.179503] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.179506] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.179509] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.179513] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.179557] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.179587] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.179614] pci 0000:02:00.0: reg 0x18: [mem 0xdf204000-0xdf204fff 64bit]
[    0.179631] pci 0000:02:00.0: reg 0x20: [mem 0xdf200000-0xdf203fff 64bit]
[    0.179728] pci 0000:02:00.0: supports D1 D2
[    0.179729] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.179848] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.179850] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.179853] pci 0000:00:1c.4:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.179927] pci 0000:03:00.0: [8086:095a] type 00 class 0x028000
[    0.179988] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
[    0.180195] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.180375] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.180379] pci 0000:00:1c.5:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.180397] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
[    0.205077] PCI: pci_cache_line_size set to 64 bytes
[    0.205198] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.205199] e820: reserve RAM buffer [mem 0x682af000-0x6bffffff]
[    0.205200] e820: reserve RAM buffer [mem 0x6832d000-0x6bffffff]
[    0.205201] e820: reserve RAM buffer [mem 0x75208000-0x77ffffff]
[    0.205202] e820: reserve RAM buffer [mem 0x76283000-0x77ffffff]
[    0.205203] e820: reserve RAM buffer [mem 0x77fff000-0x77ffffff]
[    0.206667] NetLabel: Initializing
[    0.206667] NetLabel:  domain hash size = 128
[    0.206667] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.206667] NetLabel:  unlabeled traffic allowed by default
[    0.207046] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.207051] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.211022] clocksource: Switched to clocksource tsc-early
[    0.218816] VFS: Disk quotas dquot_6.6.0
[    0.218828] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.218878] pnp: PnP ACPI init
[    0.218903] ACPI BIOS Error (bug): Failure looking up [\SHAD._STA.SDS0], AE_NOT_FOUND (20180313/psargs-330)
[    0.218914] ACPI Error: Method parse/execution failed \SHAD._STA, AE_NOT_FOUND (20180313/psparse-516)
[    0.218923] pnp: PnP ACPI: found 0 devices
[    0.224493] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.224526] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.224529] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.224533] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.224536] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.224541] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.224544] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.224548] pci 0000:00:1c.4:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.224555] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.224559] pci 0000:00:1c.5:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.224567] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.224569] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[    0.224571] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.224572] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.224574] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.224576] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.224578] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[    0.224580] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.224615] NET: Registered protocol family 2
[    0.224777] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.224801] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.224900] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.224998] TCP: Hash tables configured (established 65536 bind 65536)
[    0.225022] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.225040] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.225078] NET: Registered protocol family 1
[    0.225088] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.225095] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.225096] pci 0000:00:14.0: PCI INT A: no GSI
[    0.225523] PCI: CLS 0 bytes, default 64
[    0.225554] Unpacking initramfs...
[    0.324509] Freeing initrd memory: 8948K
[    0.324536] DMAR: Failed to find handle for ACPI object \_SB.PCI0.I2C0
[    0.324542] DMAR: Failed to find handle for ACPI object \_SB.PCI0.I2C1
[    0.324557] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.324559] software IO TLB [mem 0x6f30f000-0x7330f000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.324585] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[    0.324601] clocksource: Switched to clocksource tsc
[    0.324630] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.324682] Scanning for low memory corruption every 60 seconds
[    0.325120] Initialise system trusted keyrings
[    0.325128] Key type blacklist registered
[    0.325181] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.326138] zbud: loaded
[    0.326411] pstore: using lz4hc compression
[    0.327385] Key type asymmetric registered
[    0.327386] Asymmetric key parser 'x509' registered
[    0.327413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.327437] io scheduler noop registered
[    0.327438] io scheduler deadline registered
[    0.327470] io scheduler cfq registered (default)
[    0.327471] io scheduler mq-deadline registered
[    0.327471] io scheduler kyber registered
[    0.327476] io scheduler bfq registered
[    0.327594] pcieport 0000:00:1c.0: can't derive routing for PCI INT A
[    0.327595] pcieport 0000:00:1c.0: PCI INT A: no GSI
[    0.327680] pcieport 0000:00:1c.4: can't derive routing for PCI INT A
[    0.327681] pcieport 0000:00:1c.4: PCI INT A: no GSI
[    0.327747] pcieport 0000:00:1c.5: can't derive routing for PCI INT B
[    0.327748] pcieport 0000:00:1c.5: PCI INT B: no GSI
[    0.327826] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    0.327845] pcieport 0000:00:1c.4: Signaling PME with IRQ 123
[    0.327857] pcieport 0000:00:1c.5: Signaling PME with IRQ 124
[    0.327901] efifb: probing for efifb
[    0.327909] efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
[    0.327910] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.327911] efifb: scrolling: redraw
[    0.327912] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.329227] Console: switching to colour frame buffer device 128x48
[    0.330515] fb0: EFI VGA frame buffer device
[    0.330522] intel_idle: MWAIT substates: 0x11142120
[    0.330523] intel_idle: v0.4.1 model 0x4E
[    0.330695] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.330734] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.330743] ACPI: Power Button [PWRF]
[    0.330891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.331523] intel_pstate: Intel P-state driver initializing
[    0.331617] intel_pstate: HWP enabled
[    0.331639] ledtrig-cpu: registered to indicate activity on CPUs
[    0.331662] intel_pmc_core:  initialized
[    0.331832] NET: Registered protocol family 10
[    0.335281] Segment Routing with IPv6
[    0.335313] NET: Registered protocol family 17
[    0.335641] RAS: Correctable Errors collector initialized.
[    0.335710] microcode: sig=0x406e3, pf=0x80, revision=0xc2
[    0.335891] microcode: Microcode Update Driver: v2.2.
[    0.335917] sched_clock: Marking stable (335866254, 0)->(315697365, 20168889)
[    0.336126] registered taskstats version 1
[    0.336135] Loading compiled-in X.509 certificates
[    0.336147] zswap: loaded using pool lzo/zbud
[    0.338873] Key type big_key registered
[    0.339083]   Magic number: 6:278:732
[    0.339115] hctosys: unable to open rtc device (rtc0)
[    0.513825] Freeing unused kernel memory: 1476K
[    0.513826] Write protecting the kernel read-only data: 16384k
[    0.514849] Freeing unused kernel memory: 2016K
[    0.515825] Freeing unused kernel memory: 608K
[    0.569997] ACPI: bus type USB registered
[    0.570026] usbcore: registered new interface driver usbfs
[    0.570036] usbcore: registered new interface driver hub
[    0.570060] usbcore: registered new device driver usb
[    0.571616] SCSI subsystem initialized
[    0.575461] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    0.575464] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    0.575498] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.575504] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.576233] libata version 3.00 loaded.
[    0.576584] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.576590] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.576760] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.576762] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.576764] usb usb1: Product: xHCI Host Controller
[    0.576765] usb usb1: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
[    0.576767] usb usb1: SerialNumber: 0000:00:14.0
[    0.576882] hub 1-0:1.0: USB hub found
[    0.576900] hub 1-0:1.0: 12 ports detected
[    0.577230] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.577234] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.577238] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.577281] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    0.577283] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.577285] usb usb2: Product: xHCI Host Controller
[    0.577286] usb usb2: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
[    0.577288] usb usb2: SerialNumber: 0000:00:14.0
[    0.577401] hub 2-0:1.0: USB hub found
[    0.577413] hub 2-0:1.0: 6 ports detected
[    0.577586] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.577606] ahci 0000:00:17.0: version 3.0
[    0.577612] ahci 0000:00:17.0: can't derive routing for PCI INT A
[    0.577619] ahci 0000:00:17.0: PCI INT A: no GSI
[    0.577706] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl RAID mode
[    0.577709] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.577945] scsi host0: ahci
[    0.581422] scsi host1: ahci
[    0.581493] ata1: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333100 irq 126
[    0.581496] ata2: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333180 irq 126
[    0.890350] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.895921] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.897842] ata2.00: ATA-9: SAMSUNG MZNLF128HCHP-00004, FXT2301Q, max UDMA/133
[    0.897848] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.899252] ata2.00: configured for UDMA/133
[    0.907215] usb 1-4: new low-speed USB device number 2 using xhci_hcd
[    0.928582] ata1.00: ATA-10: ST1000LM035-1RK172, SDM1, max UDMA/133
[    0.928588] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.979516] ata1.00: configured for UDMA/133
[    0.980033] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM035-1RK1 SDM1 PQ: 0 ANSI: 5
[    0.980976] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG MZNLF128 301Q PQ: 0 ANSI: 5
[    0.987126] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.987133] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.987167] sd 0:0:0:0: [sda] Write Protect is off
[    0.987173] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.987223] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.987244] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    0.987278] sd 1:0:0:0: [sdb] Write Protect is off
[    0.987284] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.987342] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.991150]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[    0.991991] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.052758] usb 1-4: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[    1.052764] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.052768] usb 1-4: Product: USB Optical Mouse
[    1.059330]  sda: sda1 sda2 sda3 sda4 sda5
[    1.060312] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.061618] hidraw: raw HID events driver (C) Jiri Kosina
[    1.066879] usbcore: registered new interface driver usbhid
[    1.066882] usbhid: USB HID core driver
[    1.069224] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:1BCF:0005.0001/input/input1
[    1.070086] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-4/input0
[    1.180142] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    1.344143] usb 1-6: New USB device found, idVendor=04f2, idProduct=b54b, bcdDevice=95.56
[    1.344149] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.344154] usb 1-6: Product: USB2.0 VGA UVC WebCam
[    1.344158] usb 1-6: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.344162] usb 1-6: SerialNumber: 0x0001
[    1.467210] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    1.486759] random: fast init done
[    1.609623] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[    1.609630] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.782101] PM: Image not found (code -22)
[    1.868907] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    2.054845] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    2.070975] systemd[1]: Detected architecture x86-64.
[    2.079466] systemd[1]: Set hostname to <XXXXX>.
[    2.201634] random: systemd: uninitialized urandom read (16 bytes read)
[    2.202583] systemd[1]: Created slice User and Session Slice.
[    2.208072] random: systemd: uninitialized urandom read (16 bytes read)
[    2.208188] systemd[1]: Listening on Journal Socket.
[    2.208257] random: systemd: uninitialized urandom read (16 bytes read)
[    2.209146] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.209858] systemd[1]: Mounting POSIX Message Queue File System...
[    2.209904] systemd[1]: Reached target Slices.
[    2.211584] systemd[1]: Listening on Process Core Dump Socket.
[    2.211958] systemd[1]: Created slice system-getty.slice.
[    2.238801] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.238843] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.255180] vboxdrv: loading out-of-tree module taints kernel.
[    2.265699] vboxdrv: Found 4 processor cores
[    2.290224] vboxdrv: TSC mode is Invariant, tentative frequency 2399990345 Hz
[    2.290226] vboxdrv: Successfully loaded version 5.2.12 (interface 0x00290001)
[    2.291656] VBoxPciLinuxInit
[    2.291660] vboxpci: IOMMU not found (not registered)
[    2.292458] VBoxNetAdp: Successfully started.
[    2.293655] VBoxNetFlt: Successfully started.
[    2.682859] intel_pch_thermal 0000:00:14.2: can't derive routing for PCI INT C
[    2.682862] intel_pch_thermal 0000:00:14.2: PCI INT C: no GSI
[    2.683469] random: crng init done
[    2.683470] random: 7 urandom warning(s) missed due to ratelimiting
[    2.684856] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.703379] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    2.703384] intel-lpss 0000:00:15.0: can't derive routing for PCI INT A
[    2.703386] intel-lpss 0000:00:15.0: PCI INT A: no GSI
[    2.710169] Linux agpgart interface v0.103
[    2.730362] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    2.730814] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    2.731287] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.731758] rtc_cmos rtc_cmos: registered as rtc0
[    2.731777] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.734949] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.734957] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.734965] pcieport 0000:00:1c.4: can't derive routing for PCI INT A
[    2.734967] r8169 0000:02:00.0: PCI INT A: no GSI
[    2.744469] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x00000000e79f7b72, 70:8b:cd:43:a6:63, XID 10900800 IRQ 127
[    2.744472] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.747130] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    2.747134] intel-lpss 0000:00:15.1: can't derive routing for PCI INT B
[    2.747136] intel-lpss 0000:00:15.1: PCI INT B: no GSI
[    2.747321] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    2.747558] proc_thermal 0000:00:04.0: can't derive routing for PCI INT A
[    2.747560] proc_thermal 0000:00:04.0: PCI INT A: no GSI
[    2.748603] i801_smbus 0000:00:1f.4: can't derive routing for PCI INT A
[    2.748605] i801_smbus 0000:00:1f.4: PCI INT A: no GSI
[    2.748622] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.748649] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.748860] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.748863] mei_me 0000:00:16.0: can't derive routing for PCI INT A
[    2.748864] mei_me 0000:00:16.0: PCI INT A: no GSI
[    2.755336] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.761335] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.761337] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.761338] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.761339] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.761340] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.761341] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.774882] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.776494] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.776497] cfg80211: failed to load regulatory.db
[    2.792252] cryptd: max_cpu_qlen set to 1000
[    2.795169] snd_hda_intel 0000:00:1f.3: can't derive routing for PCI INT A
[    2.795171] snd_hda_intel 0000:00:1f.3: PCI INT A: no GSI
[    2.804950] AVX2 version of gcm_enc/dec engaged.
[    2.804952] AES CTR mode by8 optimization enabled
[    2.816112] Intel(R) Wireless WiFi driver for Linux
[    2.816114] Copyright(c) 2003- 2015 Intel Corporation
[    2.816195] pcieport 0000:00:1c.5: can't derive routing for PCI INT A
[    2.816197] iwlwifi 0000:03:00.0: PCI INT A: no GSI
[    2.821768] iwlwifi 0000:03:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[    2.927522] Adding 8191996k swap on /dev/sdb6.  Priority:-2 extents:1 across:8191996k SSFS
[    2.934456] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[    2.951788] iwlwifi 0000:03:00.0: base HW address: a4:02:b9:c9:a9:1e
[    2.990770] fuse init (API version 7.26)
[    2.991725] i915 0000:00:02.0: can't derive routing for PCI INT A
[    2.991727] i915 0000:00:02.0: PCI INT A: no GSI
[    2.992184] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    2.992186] fb: switching to inteldrmfb from EFI VGA
[    2.992205] Console: switching to colour dummy device 80x25
[    2.992265] [drm] Replacing VGA console driver
[    3.039464] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.039750] thermal thermal_zone1: failed to read out thermal zone (-61)
[    3.042334] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    3.042656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.042657] [drm] Driver supports precise vblank timestamp query.
[    3.042703] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.045395] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    3.045557] iTCO_vendor_support: vendor-support=0
[    3.046651] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.046817] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    3.046939] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.063693] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[    3.063878] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.074564] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.075308] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    3.090804] intel_rapl: Found RAPL domain package
[    3.090806] intel_rapl: Found RAPL domain core
[    3.090807] intel_rapl: Found RAPL domain uncore
[    3.090809] intel_rapl: Found RAPL domain dram
[    3.097335] fbcon: inteldrmfb (fb0) is primary device
[    3.407839] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.433489] systemd-journald[214]: Received request to flush runtime journal from PID 1
[    3.895106] Console: switching to colour frame buffer device 240x67
[    3.929287] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.991587] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.006820] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.
[    4.007208] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    4.007217] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.007225] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    4.007230] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    4.007235] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    4.007242] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
[    4.007247] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19
[    4.008297] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    4.010301] mousedev: PS/2 mouse device common for all mice
[    4.017100] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.022764] media: Linux media interface: v0.10
[    4.037518] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input3
[    4.038266] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[    4.038353] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[    4.038434] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[    4.038515] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[    4.038643] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    4.058235] Linux video capture interface: v2.00
[    4.081280] Bluetooth: Core ver 2.22
[    4.081291] NET: Registered protocol family 31
[    4.081292] Bluetooth: HCI device and connection manager initialized
[    4.081295] Bluetooth: HCI socket layer initialized
[    4.081296] Bluetooth: L2CAP socket layer initialized
[    4.081301] Bluetooth: SCO socket layer initialized
[    4.089865] usbcore: registered new interface driver btusb
[    4.104572] Bluetooth: hci0: read Intel version: 370810011003110e32
[    4.104575] Bluetooth: hci0: Intel device is already patched. patch num: 32
[    4.190714] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b54b)
[    4.193223] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    4.193226] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    4.193228] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    4.193307] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input9
[    4.193415] usbcore: registered new interface driver uvcvideo
[    4.193416] USB Video Class driver (1.1.1)
[    4.485314] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.485316] Bluetooth: BNEP filters: protocol multicast
[    4.485321] Bluetooth: BNEP socket layer initialized
[    4.736530] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    4.778693] r8169 0000:02:00.0 enp2s0: link down
[    4.778805] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    4.782436] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    4.885169] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    4.998414] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    5.141725] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    8.682831] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    9.803972] wlp3s0: authenticate with 70:2e:22:de:55:ce
[    9.807297] wlp3s0: send auth to 70:2e:22:de:55:ce (try 1/3)
[    9.809479] wlp3s0: authenticated
[    9.810023] wlp3s0: associate with 70:2e:22:de:55:ce (try 1/3)
[    9.816000] wlp3s0: RX AssocResp from 70:2e:22:de:55:ce (capab=0x431 status=0 aid=4)
[    9.827530] wlp3s0: associated
[    9.857803] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   12.236020] ahci 0000:00:17.0: port does not support device sleep
[   43.083670] usb 1-1: new full-speed USB device number 5 using xhci_hcd
[   43.226673] usb 1-1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[   43.226675] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   43.226676] usb 1-1: Product: USB Receiver
[   43.226678] usb 1-1: Manufacturer: Logitech
[   43.229587] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C534.0002/input/input10
[   43.284292] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[   43.286585] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C534.0003/input/input11
[   43.341239] hid-generic 0003:046D:C534.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[   54.543351] Bluetooth: RFCOMM TTY layer initialized
[   54.543357] Bluetooth: RFCOMM socket layer initialized
[   54.543364] Bluetooth: RFCOMM ver 1.11

Here is dmesg with kernel 4.14.50-1-lts

[    0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16
[    0.000000] Linux version 4.14.50-1-lts (builduser@andyrtr) (gcc version 8.1.1 20180531 (GCC)) #1 SMP Sat Jun 16 18:59:53 CEST 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=4f2d77c5-f763-4d59-97d5-a160eabcae7e rw quiet splash pci=noaer resume=UUID=966bc206-9f53-442c-bf3c-e12d6d8d35f6
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000682aefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000682af000-0x00000000682affff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000682b0000-0x00000000682d9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000682da000-0x000000006832cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000006832d000-0x000000006876dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006876e000-0x0000000075207fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000075208000-0x0000000075ee6fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000075ee7000-0x0000000076282fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000076283000-0x000000007711dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007711e000-0x0000000077f87fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077f88000-0x0000000077ffdfff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000077ffe000-0x0000000077ffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000283ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ESRT=0x77ec7e18  ACPI=0x76387000  ACPI 2.0=0x76387000  SMBIOS=0xf05e0  SMBIOS 3.0=0xf0600  MPS=0xfca50 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. K501UX/K501UX, BIOS K501UX.209 01/20/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x284000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007A000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 0079000000 mask 7FFF000000 uncachable
[    0.000000]   4 base 0078800000 mask 7FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x77fff max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc90-0x000fcc9f] mapped at [ffffffffff240c90]
[    0.000000] esrt: Reserving ESRT space from 0x0000000077ec7e18 to 0x0000000077ec7e50.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9efe80095000] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x17c638000, 0x17c638fff] PGTABLE
[    0.000000] BRK [0x17c639000, 0x17c639fff] PGTABLE
[    0.000000] BRK [0x17c63a000, 0x17c63afff] PGTABLE
[    0.000000] BRK [0x17c63b000, 0x17c63bfff] PGTABLE
[    0.000000] BRK [0x17c63c000, 0x17c63cfff] PGTABLE
[    0.000000] BRK [0x17c63d000, 0x17c63dfff] PGTABLE
[    0.000000] BRK [0x17c63e000, 0x17c63efff] PGTABLE
[    0.000000] BRK [0x17c63f000, 0x17c63ffff] PGTABLE
[    0.000000] BRK [0x17c640000, 0x17c640fff] PGTABLE
[    0.000000] BRK [0x17c641000, 0x17c641fff] PGTABLE
[    0.000000] BRK [0x17c642000, 0x17c642fff] PGTABLE
[    0.000000] BRK [0x17c643000, 0x17c643fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x36e8d000-0x3773dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000076387000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000763870B0 0000E4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000763ABF68 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x0000000076387228 024D3F (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000007711CF80 000040
[    0.000000] ACPI: APIC 0x00000000763AC078 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000763AC100 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000763AC148 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000763AC1E8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000763AC228 000038 (v01 _ASUS_ Notebook 01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x00000000763AC260 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: ECDT 0x00000000763AC578 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: LPIT 0x00000000763AC640 000094 (v01 INTEL  SKL-ULT  00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000763AC6D8 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.000000] ACPI: DBGP 0x00000000763AC920 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x00000000763AC958 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000763AC9B0 003D5F (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000763B0710 005882 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000763B5F98 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x00000000763B5FE0 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: BGRT 0x00000000763B6E38 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000763B6E70 0007B3 (v02 SgRef  SgPch    00001000 INTL 20120913)
[    0.000000] ACPI: DMAR 0x00000000763B7628 0000F0 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.000000] ACPI: UEFI 0x00000000763B7718 00063A (v01 INTEL  RstSataE 00000000 ??   00000000)
[    0.000000] ACPI: UEFI 0x00000000763B7D58 00005C (v01 INTEL  RstSataV 00000000 ??   00000000)
[    0.000000] ACPI: TPM2 0x00000000763B7DB8 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x00000000763B7DF0 001A7D (v01 OptRef OptTabl  00001000 INTL 20120913)
[    0.000000] ACPI: MSDM 0x0000000075CA8F18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000283ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x283ffb000-0x283ffefff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000283ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000682aefff]
[    0.000000]   node   0: [mem 0x00000000682da000-0x000000006832cfff]
[    0.000000]   node   0: [mem 0x000000006876e000-0x0000000075207fff]
[    0.000000]   node   0: [mem 0x0000000075ee7000-0x0000000076282fff]
[    0.000000]   node   0: [mem 0x0000000077ffe000-0x0000000077ffefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000283ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000283ffffff]
[    0.000000] On node 0 totalpages: 2068695
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 29 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7429 pages used for memmap
[    0.000000]   DMA32 zone: 475449 pages, LIFO batch:31
[    0.000000]   Normal zone: 24832 pages used for memmap
[    0.000000]   Normal zone: 1589248 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000079000000-0x000000007affffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x682af000-0x682affff]
[    0.000000] PM: Registered nosave memory: [mem 0x682b0000-0x682d9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6832d000-0x6876dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x75208000-0x75ee6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x76283000-0x7711dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7711e000-0x77f87fff]
[    0.000000] PM: Registered nosave memory: [mem 0x77f88000-0x77ffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x77fff000-0x77ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x79000000-0x7affffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7b000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x4cc with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff9f0103c00000 s132504 r8192 d31336 u524288
[    0.000000] pcpu-alloc: s132504 r8192 d31336 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2036341
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=4f2d77c5-f763-4d59-97d5-a160eabcae7e rw quiet splash pci=noaer resume=UUID=966bc206-9f53-442c-bf3c-e12d6d8d35f6
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7998928K/8274780K available (10252K kernel code, 1149K rwdata, 2832K rodata, 1416K init, 988K bss, 275852K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29111 entries in 114 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.010000] tsc: Detected 2400.000 MHz processor
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[    0.010000] pid_max: default: 32768 minimum: 301
[    0.010000] ACPI: Core revision 20170728
[    0.044143] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.045257] Security Framework initialized
[    0.045258] Yama: becoming mindful.
[    0.046108] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.046525] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.046543] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.046556] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.046707] CPU: Physical Processor ID: 0
[    0.046708] CPU: Processor Core ID: 0
[    0.046712] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.046713] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.046717] mce: CPU supports 8 MCE banks
[    0.046724] CPU0: Thermal monitoring enabled (TM1)
[    0.046737] process: using mwait in idle threads
[    0.046739] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.046739] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.046741] Spectre V2 : Mitigation: Full generic retpoline
[    0.046741] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.046741] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.046742] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.046742] Speculative Store Bypass: Vulnerable
[    0.050965] Freeing SMP alternatives memory: 28K
[    0.057241] smpboot: Max logical packages: 2
[    0.057245] DMAR: Host address width 39
[    0.057246] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.057252] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.057253] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.057257] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.057258] DMAR: RMRR base: 0x00000075c88000 end: 0x00000075ca7fff
[    0.057259] DMAR: RMRR base: 0x00000078800000 end: 0x0000007affffff
[    0.057260] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.057260] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.057262] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.057262] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.057263] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.057264] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.058685] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.058686] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.062620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.162663] TSC deadline timer enabled
[    0.162668] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[    0.162720] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.162746] ... version:                4
[    0.162746] ... bit width:              48
[    0.162747] ... generic registers:      4
[    0.162748] ... value mask:             0000ffffffffffff
[    0.162748] ... max period:             00007fffffffffff
[    0.162748] ... fixed-purpose events:   3
[    0.162749] ... event mask:             000000070000000f
[    0.162781] Hierarchical SRCU implementation.
[    0.163350] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.163360] smp: Bringing up secondary CPUs ...
[    0.163413] x86: Booting SMP configuration:
[    0.163414] .... node  #0, CPUs:      #1 #2 #3
[    0.165371] smp: Brought up 1 node, 4 CPUs
[    0.165371] smpboot: Total of 4 processors activated (19200.00 BogoMIPS)
[    0.165371] devtmpfs: initialized
[    0.165371] x86/mm: Memory block size: 128MB
[    0.165371] PM: Registering ACPI NVS region [mem 0x682af000-0x682affff] (4096 bytes)
[    0.165371] PM: Registering ACPI NVS region [mem 0x76283000-0x7711dfff] (15314944 bytes)
[    0.165371] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.165371] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.165371] pinctrl core: initialized pinctrl subsystem
[    0.165371] RTC time:  5:46:26, date: 06/19/18
[    0.165371] NET: Registered protocol family 16
[    0.165371] cpuidle: using governor ladder
[    0.165371] cpuidle: using governor menu
[    0.165371] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.165371] ACPI: bus type PCI registered
[    0.165371] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165371] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.165371] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.165371] PCI: Using configuration type 1 for base access
[    0.165371] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.165371] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.165371] ACPI: Added _OSI(Module Device)
[    0.165371] ACPI: Added _OSI(Processor Device)
[    0.165371] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.165371] ACPI: Added _OSI(Processor Aggregator Device)
[    0.165371] ACPI: EC: EC started
[    0.165371] ACPI: EC: interrupt blocked
[    0.170010] ACPI: \: Used as first EC
[    0.170010] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.170010] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.170214] ACPI Error: [_SB_.PCI0.RP01.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)
[    0.170214] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20170728/psparse-550)
[    0.170214] ACPI: Executed 22 blocks of module-level executable AML code
[    0.175928] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.191842] ACPI: Dynamic OEM Table Load:
[    0.191842] ACPI: SSDT 0xFFFF9F00F9F56800 00061E (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.191842] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.191842] ACPI: Dynamic OEM Table Load:
[    0.191842] ACPI: SSDT 0xFFFF9F00F9897000 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.191842] ACPI: Dynamic OEM Table Load:
[    0.191842] ACPI: SSDT 0xFFFF9F00F9839780 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20120913)
[    0.191842] ACPI: Dynamic OEM Table Load:
[    0.191844] ACPI: SSDT 0xFFFF9F00F9878600 000130 (v02 PmRef  HwpLvt   00003000 INTL 20120913)
[    0.200711] ACPI: Dynamic OEM Table Load:
[    0.200716] ACPI: SSDT 0xFFFF9F00F9EF3800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.201093] ACPI: Dynamic OEM Table Load:
[    0.201093] ACPI: SSDT 0xFFFF9F00F997A200 000119 (v02 PmRef  ApHwp    00003000 INTL 20120913)
[    0.201093] ACPI: Dynamic OEM Table Load:
[    0.201093] ACPI: SSDT 0xFFFF9F00F9878400 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.201930] ACPI: Interpreter enabled
[    0.201967] ACPI: (supports S0 S3 S4 S5)
[    0.201968] ACPI: Using IOAPIC for interrupt routing
[    0.202001] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.202537] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [PC09] (on)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.202537] ACPI: Power Resource [WRST] (off)
[    0.220215] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.220220] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.221539] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[    0.221540] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.222127] PCI host bridge to bus 0000:00
[    0.222129] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.222131] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.222132] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.222133] pci_bus 0000:00: root bus resource [mem 0x7b000000-0xdfffffff window]
[    0.222134] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.222135] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.222143] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.222241] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[    0.222250] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.222256] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.222259] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.222272] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.222372] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.222384] pci 0000:00:04.0: reg 0x10: [mem 0xdf320000-0xdf327fff 64bit]
[    0.222561] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.222584] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[    0.222652] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.222759] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.222781] pci 0000:00:14.2: reg 0x10: [mem 0xdf338000-0xdf338fff 64bit]
[    0.223009] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.223272] pci 0000:00:15.0: reg 0x10: [mem 0xdf337000-0xdf337fff 64bit]
[    0.224211] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.224474] pci 0000:00:15.1: reg 0x10: [mem 0xdf336000-0xdf336fff 64bit]
[    0.225349] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.225376] pci 0000:00:16.0: reg 0x10: [mem 0xdf335000-0xdf335fff 64bit]
[    0.225452] pci 0000:00:16.0: PME# supported from D3hot
[    0.225569] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400
[    0.225587] pci 0000:00:17.0: reg 0x10: [mem 0xdf330000-0xdf331fff]
[    0.225595] pci 0000:00:17.0: reg 0x14: [mem 0xdf334000-0xdf3340ff]
[    0.225603] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.225611] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.225619] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.225626] pci 0000:00:17.0: reg 0x24: [mem 0xdf333000-0xdf3337ff]
[    0.225669] pci 0000:00:17.0: PME# supported from D3hot
[    0.225786] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.225853] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.225991] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.226058] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.226185] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.226251] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.226389] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[    0.226597] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.226614] pci 0000:00:1f.2: reg 0x10: [mem 0xdf32c000-0xdf32ffff]
[    0.226767] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.226796] pci 0000:00:1f.3: reg 0x10: [mem 0xdf328000-0xdf32bfff 64bit]
[    0.226829] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[    0.226880] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.227045] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.227104] pci 0000:00:1f.4: reg 0x10: [mem 0xdf332000-0xdf3320ff 64bit]
[    0.227174] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.227391] pci 0000:01:00.0: [10de:139a] type 00 class 0x030200
[    0.227415] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.227427] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.227439] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.227448] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.227456] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.227608] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.227611] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.227614] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.227618] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.227681] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.227711] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.227738] pci 0000:02:00.0: reg 0x18: [mem 0xdf204000-0xdf204fff 64bit]
[    0.227755] pci 0000:02:00.0: reg 0x20: [mem 0xdf200000-0xdf203fff 64bit]
[    0.227853] pci 0000:02:00.0: supports D1 D2
[    0.227854] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.250074] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.250086] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.250098] pci 0000:00:1c.4:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.250231] pci 0000:03:00.0: [8086:095a] type 00 class 0x028000
[    0.250297] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
[    0.250507] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.280126] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.280131] pci 0000:00:1c.5:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.282431] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.282479] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.282526] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.282573] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.282619] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.282665] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.282711] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.282757] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.283406] ACPI: EC: interrupt unblocked
[    0.283421] ACPI: EC: event unblocked
[    0.283439] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.283440] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.283503] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.283503] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.283503] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.283503] vgaarb: loaded
[    0.283503] EDAC MC: Ver: 3.0.0
[    0.283526] Registered efivars operations
[    0.283526] PCI: Using ACPI for IRQ routing
[    0.310409] PCI: pci_cache_line_size set to 64 bytes
[    0.310530] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.310531] e820: reserve RAM buffer [mem 0x682af000-0x6bffffff]
[    0.310532] e820: reserve RAM buffer [mem 0x6832d000-0x6bffffff]
[    0.310532] e820: reserve RAM buffer [mem 0x75208000-0x77ffffff]
[    0.310533] e820: reserve RAM buffer [mem 0x76283000-0x77ffffff]
[    0.310534] e820: reserve RAM buffer [mem 0x77fff000-0x77ffffff]
[    0.310612] NetLabel: Initializing
[    0.310613] NetLabel:  domain hash size = 128
[    0.310613] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.310636] NetLabel:  unlabeled traffic allowed by default
[    0.310646] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.310646] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.312398] clocksource: Switched to clocksource hpet
[    0.317213] VFS: Disk quotas dquot_6.6.0
[    0.317238] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.317291] pnp: PnP ACPI init
[    0.317583] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.317585] system 00:00: [io  0xffff] has been reserved
[    0.317586] system 00:00: [io  0xffff] has been reserved
[    0.317587] system 00:00: [io  0xffff] has been reserved
[    0.317589] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.317590] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.317594] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.317680] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.317708] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.317711] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.317818] system 00:03: [io  0x0240-0x0259] has been reserved
[    0.317819] system 00:03: [io  0x0380-0x038f] has been reserved
[    0.317822] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.317853] pnp 00:04: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.317989] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.317990] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.317992] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.317993] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.317994] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.317996] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.317997] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.317998] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.318000] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.318001] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.318004] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.318035] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.318037] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.318038] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.318039] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.318041] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.318042] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.318043] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.318046] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.318324] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.318327] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.319360] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.319361] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.319363] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.319365] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.320163] pnp: PnP ACPI: found 9 devices
[    0.328389] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.328412] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.328414] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.328417] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.328420] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.328424] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.328426] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.328429] pci 0000:00:1c.4:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.328435] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.328439] pci 0000:00:1c.5:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.328445] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.328446] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.328448] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.328449] pci_bus 0000:00: resource 7 [mem 0x7b000000-0xdfffffff window]
[    0.328450] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.328451] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.328452] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.328453] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.328455] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.328456] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[    0.328457] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.328570] NET: Registered protocol family 2
[    0.328686] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.328763] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.328868] TCP: Hash tables configured (established 65536 bind 65536)
[    0.328891] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.328909] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.328947] NET: Registered protocol family 1
[    0.328956] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.329607] PCI: CLS 0 bytes, default 64
[    0.329637] Unpacking initramfs...
[    0.426600] Freeing initrd memory: 8900K
[    0.426634] DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.0
[    0.426637] DMAR: ACPI device "device:6c" under DMAR at fed91000 as 00:15.1
[    0.426649] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.426651] software IO TLB [mem 0x6f30e000-0x7330e000] (64MB) mapped at [ffff9efeef30e000-ffff9efef330dfff]
[    0.426844] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[    0.426953] Scanning for low memory corruption every 60 seconds
[    0.427450] Initialise system trusted keyrings
[    0.427458] Key type blacklist registered
[    0.427525] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.428292] zbud: loaded
[    0.431092] Key type asymmetric registered
[    0.431114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.431177] io scheduler noop registered
[    0.431178] io scheduler deadline registered (default)
[    0.431207] io scheduler cfq registered
[    0.431207] io scheduler mq-deadline registered
[    0.431208] io scheduler kyber registered
[    0.431236] io scheduler bfq registered
[    0.431851] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    0.431864] pcieport 0000:00:1c.4: Signaling PME with IRQ 123
[    0.431875] pcieport 0000:00:1c.5: Signaling PME with IRQ 124
[    0.431893] efifb: probing for efifb
[    0.431901] efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
[    0.431902] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.431902] efifb: scrolling: redraw
[    0.431903] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.433236] Console: switching to colour frame buffer device 128x48
[    0.434490] fb0: EFI VGA frame buffer device
[    0.434495] intel_idle: MWAIT substates: 0x11142120
[    0.434496] intel_idle: v0.4.1 model 0x4E
[    0.434664] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.435355] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.436069] rtc_cmos 00:01: RTC can wake from S4
[    0.436458] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.436539] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.436546] intel_pstate: Intel P-state driver initializing
[    0.437037] intel_pstate: HWP enabled
[    0.437102] ledtrig-cpu: registered to indicate activity on CPUs
[    0.437142] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    0.437332] NET: Registered protocol family 10
[    0.441352] Segment Routing with IPv6
[    0.441367] NET: Registered protocol family 17
[    0.441791] RAS: Correctable Errors collector initialized.
[    0.441816] microcode: sig=0x406e3, pf=0x80, revision=0xc2
[    0.441909] microcode: Microcode Update Driver: v2.2.
[    0.441916] sched_clock: Marking stable (441905755, 0)->(443783809, -1878054)
[    0.442220] registered taskstats version 1
[    0.442225] Loading compiled-in X.509 certificates
[    0.442237] zswap: loaded using pool lzo/zbud
[    0.444743] Key type big_key registered
[    0.445742]   Magic number: 6:192:770
[    0.445923] rtc_cmos 00:01: setting system clock to 2018-06-19 05:46:26 UTC (1529387186)
[    0.647740] Freeing unused kernel memory: 1416K
[    0.647741] Write protecting the kernel read-only data: 16384k
[    0.648929] Freeing unused kernel memory: 2016K
[    0.650838] Freeing unused kernel memory: 1264K
[    0.730270] SCSI subsystem initialized
[    0.733114] ACPI: bus type USB registered
[    0.733133] usbcore: registered new interface driver usbfs
[    0.733143] usbcore: registered new interface driver hub
[    0.733160] usbcore: registered new device driver usb
[    0.736384] libata version 3.00 loaded.
[    0.737478] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.737484] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.738633] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.738644] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.738912] hub 1-0:1.0: USB hub found
[    0.738941] hub 1-0:1.0: 12 ports detected
[    0.739707] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.739711] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.739714] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.739871] hub 2-0:1.0: USB hub found
[    0.739903] hub 2-0:1.0: 6 ports detected
[    0.740649] ahci 0000:00:17.0: version 3.0
[    0.751020] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl RAID mode
[    0.751022] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.751417] scsi host0: ahci
[    0.751534] scsi host1: ahci
[    0.751576] ata1: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333100 irq 126
[    0.751581] ata2: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333180 irq 126
[    1.081899] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.083878] ata2.00: ATA-9: SAMSUNG MZNLF128HCHP-00004, FXT2301Q, max UDMA/133
[    1.083883] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.085277] ata2.00: configured for UDMA/133
[    1.100563] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.290156] hidraw: raw HID events driver (C) Jiri Kosina
[    1.294207] usbcore: registered new interface driver usbhid
[    1.294209] usbhid: USB HID core driver
[    1.295238] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C534.0001/input/input0
[    1.360887] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    1.361491] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C534.0002/input/input1
[    1.430790] clocksource: Switched to clocksource tsc
[    1.430986] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    1.440091] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    1.790550] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    1.930555] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.167614] ata1.00: ATA-10: ST1000LM035-1RK172, SDM1, max UDMA/133
[    3.167619] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.218694] ata1.00: configured for UDMA/133
[    3.219194] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM035-1RK1 SDM1 PQ: 0 ANSI: 5
[    3.220276] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG MZNLF128 301Q PQ: 0 ANSI: 5
[    3.225946] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.225954] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.225981] sd 0:0:0:0: [sda] Write Protect is off
[    3.225987] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.226051] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.226148] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.226176] sd 1:0:0:0: [sdb] Write Protect is off
[    3.226183] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.226225] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.229690]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[    3.230528] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.270179]  sda: sda1 sda2 sda3 sda4 sda5
[    3.272337] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.529224] random: fast init done
[    4.116593] PM: Starting manual resume from disk
[    4.118566] PM: Image not found (code -22)
[    4.182298] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    4.319023] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.330040] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    4.360827] systemd[1]: Detected architecture x86-64.
[    4.365876] systemd[1]: Set hostname to <XXXXX>.
[    4.472313] random: systemd: uninitialized urandom read (16 bytes read)
[    4.472385] systemd[1]: Listening on Journal Socket.
[    4.472466] random: systemd: uninitialized urandom read (16 bytes read)
[    4.473782] systemd[1]: Mounting POSIX Message Queue File System...
[    4.473812] random: systemd: uninitialized urandom read (16 bytes read)
[    4.475081] systemd[1]: Listening on Process Core Dump Socket.
[    4.475137] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.475190] systemd[1]: Listening on udev Control Socket.
[    4.479349] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.481063] systemd[1]: Starting Load Kernel Modules...
[    4.501398] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.501431] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    4.601964] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    4.603349] ACPI: Lid Switch [LID]
[    4.604814] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    4.604843] ACPI: Sleep Button [SLPB]
[    4.604894] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    4.604915] ACPI: Power Button [PWRF]
[    4.608819] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5
[    4.612076] ACPI: AC Adapter [AC0] (on-line)
[    4.629107] ACPI: Battery Slot [BAT0] (battery present)
[    4.630981] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    4.631064] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    4.726652] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[    4.726653] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    4.727795] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.737179] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.737359] thermal LNXTHERM:00: registered as thermal_zone5
[    4.737360] ACPI: Thermal Zone [THRM] (46 C)
[    4.741403] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.749500] Linux agpgart interface v0.103
[    4.770022] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    4.834215] Adding 8191996k swap on /dev/sdb6.  Priority:-2 extents:1 across:8191996k SSFS
[    4.850823] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    4.860555] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    4.871516] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    4.871517] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.871518] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.871519] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.871520] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.871520] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    4.880031] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    4.880350] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    4.883298] random: crng init done
[    4.883300] random: 7 urandom warning(s) missed due to ratelimiting
[    4.895656] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.896091] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.899773] AVX2 version of gcm_enc/dec engaged.
[    4.899774] AES CTR mode by8 optimization enabled
[    4.903352] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    4.903380] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    4.910201] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.910209] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.967810] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffb13e81065000, 70:8b:cd:43:a6:63, XID 10900800 IRQ 128
[    4.967813] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    5.028762] Intel(R) Wireless WiFi driver for Linux
[    5.028763] Copyright(c) 2003- 2015 Intel Corporation
[    5.029183] [drm] Memory usable by graphics device = 4096M
[    5.029186] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    5.029187] fb: switching to inteldrmfb from EFI VGA
[    5.029204] Console: switching to colour dummy device 80x25
[    5.029266] [drm] Replacing VGA console driver
[    5.035666] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.035667] [drm] Driver supports precise vblank timestamp query.
[    5.037862] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.042739] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[    5.050214] iwlwifi 0000:03:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[    5.077586] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    5.095427] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.099023] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    5.099112] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    5.099146] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input8
[    5.122281] asus_wmi: ASUS WMI generic driver loaded
[    5.123345] asus_wmi: Initialization: 0x1
[    5.123384] asus_wmi: BIOS WMI version: 7.9
[    5.123427] asus_wmi: SFUN value: 0xa0065
[    5.124802] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9
[    5.130746] asus_wmi: Number of fans: 1
[    5.159398] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[    5.164329] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.175524] intel_rapl: Found RAPL domain package
[    5.175526] intel_rapl: Found RAPL domain core
[    5.175527] intel_rapl: Found RAPL domain uncore
[    5.175528] intel_rapl: Found RAPL domain dram
[    5.177290] iwlwifi 0000:03:00.0: base HW address: a4:02:b9:c9:a9:1e
[    5.192009] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input10
[    5.193405] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.
[    5.193707] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    5.193709] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.193711] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    5.193713] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    5.193714] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    5.193716] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
[    5.193717] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19
[    5.194453] iTCO_vendor_support: vendor-support=0
[    5.194548] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    5.197589] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.197734] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    5.197841] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.200247] input: FTE1001:00 0B05:0101 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-FTE1001:00/0018:0B05:0101.0003/input/input14
[    5.201614] asus 0018:0B05:0101.0003: input,hidraw2: I2C HID v1.00 Mouse [FTE1001:00 0B05:0101] on i2c-FTE1001:00
[    5.205442] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    5.207781] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    5.208374] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    5.208422] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    5.208462] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    5.208500] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    5.208534] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    5.242571] fbcon: inteldrmfb (fb0) is primary device
[    5.271633] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.271720] mousedev: PS/2 mouse device common for all mice
[    5.271884] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.271900] thermal thermal_zone9: failed to read out thermal zone (-61)
[    5.389143] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    5.463643] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.553998] ahci 0000:00:17.0: port does not support device sleep
[    5.731770] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    5.751455] fuse init (API version 7.26)
[    5.856759] media: Linux media interface: v0.10
[    5.873706] Linux video capture interface: v2.00
[    5.895960] Bluetooth: Core ver 2.22
[    5.895976] NET: Registered protocol family 31
[    5.895976] Bluetooth: HCI device and connection manager initialized
[    5.895979] Bluetooth: HCI socket layer initialized
[    5.895981] Bluetooth: L2CAP socket layer initialized
[    5.895984] Bluetooth: SCO socket layer initialized
[    5.917407] Console: switching to colour frame buffer device 240x67
[    5.937658] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.061008] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b54b)
[    6.061745] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    6.061746] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    6.061747] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    6.061817] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input18
[    6.061882] usbcore: registered new interface driver uvcvideo
[    6.061883] USB Video Class driver (1.1.1)
[    6.111189] usbcore: registered new interface driver btusb
[    6.127450] Bluetooth: hci0: read Intel version: 370810011003110e32
[    6.127453] Bluetooth: hci0: Intel device is already patched. patch num: 32
[    6.268804] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.297020] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    6.307106] systemd-journald[195]: Received request to flush runtime journal from PID 1
[    6.813063] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.813064] Bluetooth: BNEP filters: protocol multicast
[    6.813066] Bluetooth: BNEP socket layer initialized
[    7.130259] [drm] RC6 on
[    7.206287] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    7.282007] r8169 0000:02:00.0 enp2s0: link down
[    7.282075] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    7.285454] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.389117] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.505262] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.677649] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   11.285755] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   12.596387] wlp3s0: authenticate with 70:2e:22:de:55:ce
[   12.600022] wlp3s0: send auth to 70:2e:22:de:55:ce (try 1/3)
[   12.603022] wlp3s0: authenticated
[   12.610205] wlp3s0: associate with 70:2e:22:de:55:ce (try 1/3)
[   12.615280] wlp3s0: RX AssocResp from 70:2e:22:de:55:ce (capab=0x431 status=0 aid=4)
[   12.620020] wlp3s0: associated
[   12.647392] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   18.160052] Bluetooth: RFCOMM TTY layer initialized
[   18.160057] Bluetooth: RFCOMM socket layer initialized
[   18.160066] Bluetooth: RFCOMM ver 1.11
[   20.449097] usb 1-4: USB disconnect, device number 2
[   41.826193] usb 1-4: new low-speed USB device number 5 using xhci_hcd
[   42.012906] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:1BCF:0005.0004/input/input19
[   42.081019] hid-generic 0003:1BCF:0005.0004: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-4/input0
[   62.501998] device-mapper: uevent: version 1.0.3
[   62.502075] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[   66.610446] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[   66.626238] JFS: nTxBlock = 8192, nTxLock = 65536
[   66.644315] ntfs: driver 2.1.32 [Flags: R/W MODULE].
[   66.845973] raid6: sse2x1   gen() 10085 MB/s
[   67.015844] raid6: sse2x1   xor()  7316 MB/s
[   67.185720] raid6: sse2x2   gen() 12628 MB/s
[   67.355595] raid6: sse2x2   xor()  8438 MB/s
[   67.525471] raid6: sse2x4   gen() 14562 MB/s
[   67.695343] raid6: sse2x4   xor()  8850 MB/s
[   67.865230] raid6: avx2x1   gen() 20198 MB/s
[   68.035118] raid6: avx2x1   xor() 14046 MB/s
[   68.205010] raid6: avx2x2   gen() 25034 MB/s
[   68.374899] raid6: avx2x2   xor() 15502 MB/s
[   68.544787] raid6: avx2x4   gen() 28037 MB/s
[   68.714681] raid6: avx2x4   xor() 17105 MB/s
[   68.714682] raid6: using algorithm avx2x4 gen() 28037 MB/s
[   68.714683] raid6: .... xor() 17105 MB/s, rmw enabled
[   68.714684] raid6: using avx2x2 recovery algorithm
[   68.717418] xor: automatically using best checksumming function   avx       
[   68.808225] Btrfs loaded, crc32c=crc32c-intel

Here is my machine:

System:    Host: XXXXXX Kernel: 4.14.50-1-lts x86_64 bits: 64 Desktop: Cinnamon 3.8.4 
           Distro: Antergos Linux   ( ) 
Machine:   Type: Laptop System: ASUSTeK product: K501UX v: 1.0 serial: <root required> 
           Mobo: ASUSTeK model: K501UX v: 1.0 serial: <root required> UEFI: American Megatrends v: K501UX.209 
           date: 01/20/2016 
Battery:   ID-1: BAT0 charge: 36.0 Wh condition: 36.0/48.3 Wh (75%) 
CPU:       Topology: Dual Core model: Intel Core i5-6200U bits: 64 type: MT MCP L2 cache: 3072 KiB 
           Speed: 2769 MHz min/max: 400/2800 MHz Core speeds (MHz): 1: 2778 2: 2759 3: 2731 4: 2793 
Graphics:  Card-1: Intel HD Graphics 520 driver: i915 v: kernel 
           Card-2: NVIDIA GM107M [GeForce GTX 950M] driver: N/A 
           Display: x11 server: X.Org 1.20.0 driver: modesetting unloaded: fbdev,intel,vesa 
           resolution: 1920x1080~60Hz, 1920x1080~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2) v: 4.5 Mesa 18.1.1 
Audio:     Card-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel 
           Sound Server: ALSA v: k4.14.50-1-lts 
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 
           IF: enp2s0 state: down mac: 70:8b:cd:43:a6:63 
           Card-2: Intel Wireless 7265 driver: iwlwifi 
           IF: wlp3s0 state: up mac: a4:02:b9:c9:a9:1e 
Drives:    HDD Total Size: 1.03 TiB used: 472.26 GiB (44.9%) 
           ID-1: /dev/sda vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB 
           ID-2: /dev/sdb vendor: Samsung model: MZNLF128HCHP-00004 size: 119.24 GiB 
Partition: ID-1: / size: 17.37 GiB used: 12.14 GiB (69.9%) fs: ext4 dev: /dev/sdb5 
           ID-2: /home size: 96.46 GiB used: 8.86 GiB (9.2%) fs: ext4 dev: /dev/sda5 
           ID-3: /var/log size: 1.91 GiB used: 128.3 MiB (6.6%) fs: ext4 dev: /dev/sda4 
           ID-4: swap-1 size: 7.81 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdb6 
Sensors:   System Temperatures: cpu: 52.0 C mobo: N/A 
           Fan Speeds (RPM): cpu: 4100 
Info:      Processes: 205 Uptime: 27m Memory: 7.69 GiB used: 2.45 GiB (31.9%) Shell: bash inxi: 3.0.12

Do you see something wrong in the kernel 4.17.2-1 that could cause my keyboard and touchpad fail ?

EDIT: Since release of kernel 4.17.3-1-ARCH, everything works now !

Last edited by berturion (2018-07-02 04:45:13)

Offline

#2 2018-06-19 12:39:56

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,650

Re: [SOLVED] No mouse nor keyboard in ASUS laptop since Kernel 4.17.2-1

Known issue: https://bbs.archlinux.org/viewtopic.php?id=237875 will likely be fixed in some update down the line.

Offline

#3 2018-06-19 14:11:00

berturion
Member
Registered: 2018-06-19
Posts: 22

Re: [SOLVED] No mouse nor keyboard in ASUS laptop since Kernel 4.17.2-1

Thanks for the answer, I will keep the LTS version until it is solved.

Offline

#4 2018-06-19 15:11:36

loqs
Member
Registered: 2014-03-06
Posts: 17,317

Re: [SOLVED] No mouse nor keyboard in ASUS laptop since Kernel 4.17.2-1

Or you could redo the work from the thread V1del linked and find which commit upstream fixed the issue.
Edit:
https://bugs.archlinux.org/task/59059 (please do not expect anything to come of that bug report until an upstream fix has been located if it exists)

Last edited by loqs (2018-06-19 15:42:14)

Offline

#5 2018-06-19 18:11:31

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,650

Re: [SOLVED] No mouse nor keyboard in ASUS laptop since Kernel 4.17.2-1

Offline

#6 2018-06-19 19:49:01

loqs
Member
Registered: 2014-03-06
Posts: 17,317

Re: [SOLVED] No mouse nor keyboard in ASUS laptop since Kernel 4.17.2-1

https://git.kernel.org/pub/scm/linux/ke … deb590499d causes

$ git cherry-pick cf48bf9eee42061c0dbe06ba3e26244dd933cab1
HEAD detached at v4.17.2
You are currently cherry-picking commit cf48bf9eee42.

nothing to commit, working tree clean
The previous cherry-pick is now empty, possibly due to conflict resolution.
$ git tag --contains 32ffd6e8d1f6cef94bedca15dfcdebdeb590499d
v4.17
v4.17.1
v4.17.2
v4.18-rc1
$ git tag --contains cf48bf9eee42061c0dbe06ba3e26244dd933cab1
v4.18-rc1

Offline

#7 2018-06-20 06:19:31

berturion
Member
Registered: 2018-06-19
Posts: 22

Re: [SOLVED] No mouse nor keyboard in ASUS laptop since Kernel 4.17.2-1

I am not sure if I understand well. @loqs shows that the fix is present in v4.18-rc1 ?
I am sorry I cannot install testing versions of kernels to check that on my laptop as it is the one I use at work and my employer would not be happy if I mess with it...
Running linux-lts is the best choice for me for now.
Thank you for all these detailed information.

Offline

#8 2018-06-20 07:22:41

loqs
Member
Registered: 2014-03-06
Posts: 17,317

Re: [SOLVED] No mouse nor keyboard in ASUS laptop since Kernel 4.17.2-1

V1del suggested cf48bf9eee42061c0dbe06ba3e26244dd933cab1 as a fix I tried cherry-picking it onto v4.17.2 but git refused as there was nothing to do after conflict resolution.
32ffd6e8d1f6cef94bedca15dfcdebdeb590499d appears to be the same commit as cf48bf9eee42061c0dbe06ba3e26244dd933cab1 just with different history and is present in 4.17.2

Offline

#9 2018-06-26 05:14:43

berturion
Member
Registered: 2018-06-19
Posts: 22

Re: [SOLVED] No mouse nor keyboard in ASUS laptop since Kernel 4.17.2-1

I found that a bug has been created that describes my issue here : [linux] Kernel 4.17.2-1 errors, no input
A comment says that kernel 4.18-rc2 solves this problem.
So I will stick with linux-lts until the new mainline kernel is released.

Last edited by berturion (2018-06-26 05:16:02)

Offline

#10 2018-06-29 09:14:44

loqs
Member
Registered: 2014-03-06
Posts: 17,317

Re: [SOLVED] No mouse nor keyboard in ASUS laptop since Kernel 4.17.2-1

4.17.3-1 currently in testing fixed the bug you referenced for all those affected.

Offline

Board footer

Powered by FluxBB