[SOLVED] dmesg output in login screen

PausBenedictus · 2018-06-23 18:43:12

Hello all,

This is my first time installing Arch and my first time on the forums as well. I'm looking forward to spending some time here.

I just finished a fresh install of Arch, yet, instead of being prompted with the "clean" login prompt, I get:

https://imgur.com/eUvd4ij

When I manage to log in, commands like "poweroff" do not power off the machine but instead result in this:

https://imgur.com/GEIK0RF

I had to resort to hard resetting the machine by pressing the power button for 5 seconds.

The weird part is, very rarely and through no specific actions, I do not get these "link is not ready" lines and get a clean login prompt, from which I can log in to my system and the "poweroff" command shuts the machine down cleanly.

I have been scouring for a solution but after two days haven't found one, so I'm really at a loss here.

I have networkmanager, base, base-devel and vim installed, GRUB as a bootloader. I am connected via ethernet.

My NIC is a r8169 and the wireless controller is rtl8723be. Laptop model Lenovo B5400.

If you need any more information, feel free to ask. Thanks in advance.

Last edited by PausBenedictus (2018-06-23 23:05:53)

lo1 · 2018-06-23 19:03:10

The "link is not ready" log is from your journal, and strangely it's overriding and being printed over the login shell instead of staying in its place. Do the log behave the same when you manage to login and wait for a while in your user shell? (in order to test this you need to disable any X server automatic startup).

Given this, your machine is refusing to poweroff because there's still some processes that is refusing to close properly.

How did you install Arch? How many network manager are enabled?

systemctl list-unit-files --state=enabled

PausBenedictus · 2018-06-23 19:20:32

lo1 wrote:

The "link is not ready" log is from your journal, and strangely it's overriding and being printed over the login shell instead of staying in its place. Do the log behave the same when you manage to login and wait for a while in your user shell? (in order to test this you need to disable any X server automatic startup).
Given this, your machine is refusing to poweroff because there's still some processes that is refusing to close properly.
How did you install Arch? How many network manager are enabled?
systemctl list-unit-files --state=enabled

If I stay in the shell for a while, sporadically a "link is not ready" log will pop up every 100 somewhat seconds. I don't have any xorg stuff installed.

Indeed, the weird lines in my login shell are the exact last lines from the dmesg output. If I get a "correct" login shell by chance, my dmesg output is identical, but the lines don't get thrown into my login prompt. Whether or not I get a "messed up" login prompt appears to be random.

entering

systemctl list-unit-files --state=enabled

yields: (note that I only install dhcpcd afterwards in an attempt to solve the already exisiting problem)

autovt@.service
dbus-org.freedesktop.NetworkManager.service
dbus-org.freedesktop.nm-dispatcher.service
dhcpcd.service
getty@.service
NetworkManager-dispatcher.service
NetworkManager.service
remote-fs.target

I installed Arch from a live USB with my laptop connect through ethernet, these were the commands I used:

timedatectl set-ntp true
fdisk /dev/sda (created 4 partitions here and wrote them to disk)
mkfs.ext /dev/sda1 (and 3 and 4)
mkswap /dev/sda2
swapon /dev/sda2

mount /dev/sda3 /mnt
mkdir /mnt/home (and boot)

mount /dev/sda1 /mnt/boot (and sda4 to home)

pacstrap /mnt base base-devel vim

genfstab -U /mnt >> /mnt/etc/fstab
arch-chroot /mnt

[b]pacman -S networkmanager[/b]
systemctl enable NetworkManager

pacman -S grub
grub-install --target=i386-pc /dev/sda
grub-mkconfig -o /boot/grub/grub.cfg

passwd

vim /etc/locale.gen
locale-gen

vim /etc/locale.conf

ln -sf /usr/share/zoneinfo/Europe/Brussels /etc/localtime

vim /etc/hostname

exit
umount -R /mnt 

reboot

Last edited by PausBenedictus (2018-06-23 19:47:40)

lo1 · 2018-06-23 19:41:26

I must admit that it looks very much like my own set, and I can't see anything wrong.

Can you post output from

cat /proc/sys/kernel/printk

jasonwryan · 2018-06-23 19:43:24

Please use code tags when pasting to the boards: https://wiki.archlinux.org/index.php/Co … s_and_code

PausBenedictus · 2018-06-23 19:43:51

lo1 wrote:

I must admit that it looks very much like my own set, and I can't see anything wrong.
Can you post output from
cat /proc/sys/kernel/printk

15 3 3 3

In an earlier attempt to troubleshoot, I created

/etc/sysctl.d/20-quiet-printk.conf

with

kernel.printk = 3 3 3 3

Last edited by PausBenedictus (2018-06-23 19:46:40)

loqs · 2018-06-23 19:50:59

Can you please boot the live media chroot in and post the journal from a boot of the installed system.

PausBenedictus · 2018-06-23 20:21:10

loqs wrote:

Can you please boot the live media chroot in and post the journal from a boot of the installed system.

[    0.000000] Linux version 4.17.2-1-ARCH (builduser@heftig-9574) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Sat Jun 16 11:08:59 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=827caae2-040e-4925-b781-0f588af39505 rw quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d20bcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d20bd000-0x00000000dceeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dceef000-0x00000000dcf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO B5400  /B5400  , BIOS J7ET61WW (2.06 ) 03/03/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   1 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xd20bd max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x111660000, 0x111660fff] PGTABLE
[    0.000000] BRK [0x111661000, 0x111661fff] PGTABLE
[    0.000000] BRK [0x111662000, 0x111662fff] PGTABLE
[    0.000000] BRK [0x111663000, 0x111663fff] PGTABLE
[    0.000000] BRK [0x111664000, 0x111664fff] PGTABLE
[    0.000000] BRK [0x111665000, 0x111665fff] PGTABLE
[    0.000000] BRK [0x111666000, 0x111666fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3716b000-0x378acfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DCFFE170 0000B4 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: DSDT 0x00000000DCFE7000 0102D9 (v02 LENOVO HSW-LPT  00000000 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DCF97000 000040
[    0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: APIC 0x00000000DCFF9000 000098 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: MCFG 0x00000000DCFF8000 00003C (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000DCFE5000 001664 (v01 LENOVO PtidDevc 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCFE4000 0004E1 (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCFE3000 000539 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCFE2000 000AD8 (v01 LENOVO CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCFDE000 00355E (v01 LENOVO SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCFDD000 00036F (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.000000] ACPI: PCCT 0x00000000DCFDC000 00006E (v05 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000DCFDB000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.000000] ACPI: UEFI 0x00000000DCFDA000 000042 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: MSDM 0x00000000DCF6F000 000055 (v03 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000DCFD9000 00003E (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: FPDT 0x00000000DCFD8000 000064 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000DCFD7000 0002E2 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21f5fc000-0x21f5fffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000d20bcfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff]
[    0.000000] On node 0 totalpages: 2037337
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13379 pages used for memmap
[    0.000000]   DMA32 zone: 856253 pages, LIFO batch:31
[    0.000000]   Normal zone: 18392 pages used for memmap
[    0.000000]   Normal zone: 1177088 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd20bd000-0xdceeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdceef000-0xdcf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdcfff000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2005481
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=827caae2-040e-4925-b781-0f588af39505 rw quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7922356K/8149348K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 226992K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 32647 entries in 128 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 2394.216 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2282dfad266, max_idle_ns: 440795245425 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.95 BogoMIPS (lpj=7980720)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.019999] Security Framework initialized
[    0.019999] Yama: becoming mindful.
[    0.023353] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023955] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.023986] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024005] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024212] CPU: Physical Processor ID: 0
[    0.024213] CPU: Processor Core ID: 0
[    0.024217] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024218] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024222] mce: CPU supports 7 MCE banks
[    0.024237] process: using mwait in idle threads
[    0.024239] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.024240] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.024241] Spectre V2 : Mitigation: Full generic retpoline
[    0.024242] Speculative Store Bypass: Vulnerable
[    0.028164] Freeing SMP alternatives memory: 28K
[    0.033333] smpboot: CPU0: Intel(R) Core(TM) i3-4000M CPU @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.046673] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.046709] ... version:                3
[    0.046710] ... bit width:              48
[    0.046710] ... generic registers:      4
[    0.046711] ... value mask:             0000ffffffffffff
[    0.046712] ... max period:             00007fffffffffff
[    0.046712] ... fixed-purpose events:   3
[    0.046713] ... event mask:             000000070000000f
[    0.050005] Hierarchical SRCU implementation.
[    0.060260] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.063342] smp: Bringing up secondary CPUs ...
[    0.086678] x86: Booting SMP configuration:
[    0.086679] .... node  #0, CPUs:      #1 #2 #3
[    0.133658] smp: Brought up 1 node, 4 CPUs
[    0.133658] smpboot: Max logical packages: 2
[    0.133658] smpboot: Total of 4 processors activated (19161.80 BogoMIPS)
[    0.136940] devtmpfs: initialized
[    0.136940] x86/mm: Memory block size: 128MB
[    0.137309] PM: Registering ACPI NVS region [mem 0xdceef000-0xdcf9efff] (720896 bytes)
[    0.137309] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.137309] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.137309] pinctrl core: initialized pinctrl subsystem
[    0.137309] RTC time: 19:04:13, date: 06/23/18
[    0.137309] NET: Registered protocol family 16
[    0.137309] cpuidle: using governor ladder
[    0.140016] cpuidle: using governor menu
[    0.140020] Error parsing PCC subspaces from PCCT
[    0.140107] ACPI: bus type PCI registered
[    0.140108] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.140178] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.140188] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.140188] PCI: Using configuration type 1 for base access
[    0.140188] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.140885] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.140885] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.140885] ACPI: Added _OSI(Module Device)
[    0.140885] ACPI: Added _OSI(Processor Device)
[    0.140885] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.140885] ACPI: Added _OSI(Processor Aggregator Device)
[    0.140885] ACPI: Added _OSI(Linux-Dell-Video)
[    0.161396] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.166010] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.167452] ACPI: Dynamic OEM Table Load:
[    0.167459] ACPI: SSDT 0xFFFF8FC115404800 000474 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.168107] ACPI: Dynamic OEM Table Load:
[    0.168113] ACPI: SSDT 0xFFFF8FC115400000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.168800] ACPI: Dynamic OEM Table Load:
[    0.168805] ACPI: SSDT 0xFFFF8FC115591000 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.169916] ACPI: EC: EC started
[    0.169916] ACPI: EC: interrupt blocked
[    0.173201] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.173203] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.173205] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.173206] ACPI: Interpreter enabled
[    0.173239] ACPI: (supports S0 S3 S4 S5)
[    0.173239] ACPI: Using IOAPIC for interrupt routing
[    0.173271] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.173506] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.180512] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[    0.186300] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.186305] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.186492] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.187336] PCI host bridge to bus 0000:00
[    0.187338] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.187340] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.187341] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.187343] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.187344] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.187353] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.187551] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.187563] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.187568] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.187573] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.187761] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.187771] pci 0000:00:03.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
[    0.187986] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.188008] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
[    0.188068] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.188249] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.188271] pci 0000:00:16.0: reg 0x10: [mem 0xf0619000-0xf061900f 64bit]
[    0.188335] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.188519] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.188541] pci 0000:00:1a.0: reg 0x10: [mem 0xf061e000-0xf061e3ff]
[    0.188623] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.188809] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.188830] pci 0000:00:1b.0: reg 0x10: [mem 0xf0614000-0xf0617fff 64bit]
[    0.188900] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.189080] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.189152] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.189392] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.189465] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.189700] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.189772] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.190017] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.190039] pci 0000:00:1d.0: reg 0x10: [mem 0xf061d000-0xf061d3ff]
[    0.190123] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.190312] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.190591] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.190608] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.190616] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.190624] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.190631] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.190639] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.190646] pci 0000:00:1f.2: reg 0x24: [mem 0xf061c000-0xf061c7ff]
[    0.190683] pci 0000:00:1f.2: PME# supported from D3hot
[    0.190858] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.190877] pci 0000:00:1f.3: reg 0x10: [mem 0xf0618000-0xf06180ff 64bit]
[    0.190896] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.191133] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.191218] pci 0000:04:00.0: [10ec:b723] type 00 class 0x028000
[    0.191271] pci 0000:04:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.191318] pci 0000:04:00.0: reg 0x18: [mem 0xf0500000-0xf0503fff 64bit]
[    0.191503] pci 0000:04:00.0: supports D1 D2
[    0.191505] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.191684] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.191688] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.191692] pci 0000:00:1c.2:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.191767] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.191799] pci 0000:05:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.191827] pci 0000:05:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit]
[    0.191845] pci 0000:05:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit]
[    0.191947] pci 0000:05:00.0: supports D1 D2
[    0.191948] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.192149] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.192153] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.192157] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.192817] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.192885] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.192953] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.193019] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.193085] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.193151] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.193218] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.193283] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.194727] ACPI: EC: interrupt unblocked
[    0.194742] ACPI: EC: event unblocked
[    0.194748] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.194750] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.194816] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.194816] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.194816] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.194816] vgaarb: loaded
[    0.194816] pps_core: LinuxPPS API ver. 1 registered
[    0.194816] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.194816] PTP clock support registered
[    0.194816] EDAC MC: Ver: 3.0.0
[    0.194816] PCI: Using ACPI for IRQ routing
[    0.196859] PCI: pci_cache_line_size set to 64 bytes
[    0.196914] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.196915] e820: reserve RAM buffer [mem 0xd20bd000-0xd3ffffff]
[    0.196916] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[    0.197003] NetLabel: Initializing
[    0.197004] NetLabel:  domain hash size = 128
[    0.197005] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.197019] NetLabel:  unlabeled traffic allowed by default
[    0.197023] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.197023] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.198723] clocksource: Switched to clocksource tsc-early
[    0.207019] VFS: Disk quotas dquot_6.6.0
[    0.207038] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.207107] pnp: PnP ACPI init
[    0.207185] pnp 00:00: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.207205] pnp 00:01: Plug and Play ACPI device, IDs SYN2a14 SYN2a00 PNP0f13 (active)
[    0.207437] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.207439] system 00:02: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.207440] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.207442] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.207444] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.207445] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.207447] system 00:02: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.207448] system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.207450] system 00:02: [mem 0xff000000-0xffffffff] could not be reserved
[    0.207451] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.207453] system 00:02: [mem 0xfffff000-0xffffffff] has been reserved
[    0.207455] system 00:02: [mem 0xdfa10000-0xdfa1ffff] has been reserved
[    0.207459] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.211660] pnp: PnP ACPI: found 3 devices
[    0.217407] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.217435] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.217447] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.217450] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.217455] pci 0000:00:1c.2:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.217463] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.217465] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.217470] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.217478] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.217480] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.217482] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.217483] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[    0.217485] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.217486] pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.217488] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.217489] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.217619] NET: Registered protocol family 2
[    0.217757] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.217786] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.217881] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.218005] TCP: Hash tables configured (established 65536 bind 65536)
[    0.218038] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.218060] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.218107] NET: Registered protocol family 1
[    0.218119] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.218206] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.218207] pci 0000:00:14.0: PCI INT A: no GSI
[    0.218563] PCI: CLS 64 bytes, default 64
[    0.218594] Unpacking initramfs...
[    0.329205] Freeing initrd memory: 7432K
[    0.329211] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.329214] software IO TLB [mem 0xce0bd000-0xd20bd000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.329279] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.329298] Scanning for low memory corruption every 60 seconds
[    0.329821] Initialise system trusted keyrings
[    0.329831] Key type blacklist registered
[    0.329872] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.330972] zbud: loaded
[    0.331256] pstore: using lz4hc compression
[    0.332172] Key type asymmetric registered
[    0.332173] Asymmetric key parser 'x509' registered
[    0.332199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.332235] io scheduler noop registered
[    0.332235] io scheduler deadline registered
[    0.332270] io scheduler cfq registered (default)
[    0.332271] io scheduler mq-deadline registered
[    0.332272] io scheduler kyber registered
[    0.332277] io scheduler bfq registered
[    0.332841] intel_idle: MWAIT substates: 0x42120
[    0.332843] intel_idle: v0.4.1 model 0x3C
[    0.332984] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.333044] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.333055] ACPI: Lid Switch [LID]
[    0.333086] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.333094] ACPI: Power Button [PWRB]
[    0.333121] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.333126] ACPI: Sleep Button [SLPB]
[    0.333154] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.333158] ACPI: Power Button [PWRF]
[    0.347040] thermal LNXTHERM:00: registered as thermal_zone0
[    0.347042] ACPI: Thermal Zone [TZ00] (57 C)
[    0.347308] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.348596] intel_pstate: Intel P-state driver initializing
[    0.348746] ledtrig-cpu: registered to indicate activity on CPUs
[    0.349347] NET: Registered protocol family 10
[    0.358593] Segment Routing with IPv6
[    0.358644] NET: Registered protocol family 17
[    0.359292] RAS: Correctable Errors collector initialized.
[    0.359404] microcode: sig=0x306c3, pf=0x10, revision=0x9
[    0.359556] microcode: Microcode Update Driver: v2.2.
[    0.359590] sched_clock: Marking stable (359544992, 0)->(453223740, -93678748)
[    0.360116] registered taskstats version 1
[    0.360131] Loading compiled-in X.509 certificates
[    0.360168] zswap: loaded using pool lzo/zbud
[    0.363718] Key type big_key registered
[    0.364283]   Magic number: 6:258:92
[    0.364327]  container: hash matches
[    0.364337] hctosys: unable to open rtc device (rtc0)
[    0.569813] Freeing unused kernel memory: 1476K
[    0.569815] Write protecting the kernel read-only data: 16384k
[    0.570807] Freeing unused kernel memory: 2016K
[    0.572052] Freeing unused kernel memory: 608K
[    0.640050] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.652200] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.652259] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.652844] ACPI: bus type USB registered
[    0.652873] usbcore: registered new interface driver usbfs
[    0.652885] usbcore: registered new interface driver hub
[    0.652922] usbcore: registered new device driver usb
[    0.656673] SCSI subsystem initialized
[    0.660025] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.660796] ehci-pci: EHCI PCI platform driver
[    0.660982] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.660989] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.661002] ehci-pci 0000:00:1a.0: debug port 2
[    0.664922] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.664937] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061e000
[    0.666336] libata version 3.00 loaded.
[    0.677659] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.677726] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.677728] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.677730] usb usb1: Product: EHCI Host Controller
[    0.677731] usb usb1: Manufacturer: Linux 4.17.2-1-ARCH ehci_hcd
[    0.677732] usb usb1: SerialNumber: 0000:00:1a.0
[    0.677870] hub 1-0:1.0: USB hub found
[    0.677878] hub 1-0:1.0: 3 ports detected
[    0.678212] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.678217] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.678229] ehci-pci 0000:00:1d.0: debug port 2
[    0.681941] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.682136] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.682149] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf061d000
[    0.694723] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.694822] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.694825] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.694827] usb usb2: Product: EHCI Host Controller
[    0.694829] usb usb2: Manufacturer: Linux 4.17.2-1-ARCH ehci_hcd
[    0.694831] usb usb2: SerialNumber: 0000:00:1d.0
[    0.695131] hub 2-0:1.0: USB hub found
[    0.695140] hub 2-0:1.0: 3 ports detected
[    0.695642] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    0.695646] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    0.695695] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.695710] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.696801] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.696810] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.697015] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.697018] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.697020] usb usb3: Product: xHCI Host Controller
[    0.697022] usb usb3: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
[    0.697024] usb usb3: SerialNumber: 0000:00:14.0
[    0.697221] hub 3-0:1.0: USB hub found
[    0.697248] hub 3-0:1.0: 14 ports detected
[    0.702237] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.702245] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.702251] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.702336] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    0.702340] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.702343] usb usb4: Product: xHCI Host Controller
[    0.702346] usb usb4: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
[    0.702349] usb usb4: SerialNumber: 0000:00:14.0
[    0.702538] hub 4-0:1.0: USB hub found
[    0.702558] hub 4-0:1.0: 4 ports detected
[    0.703370] ahci 0000:00:1f.2: version 3.0
[    0.703651] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[    0.703657] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.711749] scsi host0: ahci
[    0.711898] scsi host1: ahci
[    0.712009] scsi host2: ahci
[    0.712098] scsi host3: ahci
[    0.712187] scsi host4: ahci
[    0.712223] ata1: DUMMY
[    0.712224] ata2: DUMMY
[    0.712227] ata3: SATA max UDMA/133 abar m2048@0xf061c000 port 0xf061c200 irq 25
[    0.712228] ata4: DUMMY
[    0.712230] ata5: SATA max UDMA/133 abar m2048@0xf061c000 port 0xf061c300 irq 25
[    1.008102] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.024764] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.027760] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.028107] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.028502] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.028509] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.028515] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.028689] ata5.00: ATA-11: KINGSTON SA400S37120G, SBFK71E0, max UDMA/133
[    1.028694] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.028991] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.028997] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.029003] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.029099] ata5.00: configured for UDMA/133
[    1.034731] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    1.034739] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.034748] ata3.00: ATAPI: MATSHITA DVD-RAM UJ8DB, 8.51, max UDMA/100
[    1.040622] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    1.040631] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.040646] ata3.00: configured for UDMA/100
[    1.059751] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8DB    8.51 PQ: 0 ANSI: 5
[    1.097406] scsi 4:0:0:0: Direct-Access     ATA      KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5
[    1.104877] sd 4:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.104909] sd 4:0:0:0: [sda] Write Protect is off
[    1.104917] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.104963] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.105976]  sda: sda1 sda2 sda3 sda4
[    1.106728] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.134622] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.134625] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.134771] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.160469] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
[    1.160485] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.160841] hub 1-1:1.0: USB hub found
[    1.160915] hub 1-1:1.0: 6 ports detected
[    1.174167] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    1.174171] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.174491] hub 2-1:1.0: USB hub found
[    1.174556] hub 2-1:1.0: 8 ports detected
[    1.290209] random: fast init done
[    1.333457] tsc: Refined TSC clocksource calibration: 2394.459 MHz
[    1.333478] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c51f836, max_idle_ns: 440795218683 ns
[    1.333514] clocksource: Switched to clocksource tsc
[    1.440134] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    1.456758] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    1.525939] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    1.539422] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=b728, bcdDevice= 2.00
[    1.539425] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.539427] usb 1-1.3: Product: Bluetooth Radio 
[    1.539429] usb 1-1.3: Manufacturer: Realtek 
[    1.539431] usb 1-1.3: SerialNumber: 00e04c000001
[    1.564933] usb 2-1.5: New USB device found, idVendor=04f2, idProduct=b2fa, bcdDevice=39.52
[    1.564936] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.564938] usb 2-1.5: Product: Integrated Camera
[    1.564939] usb 2-1.5: Manufacturer: Vimicro corp.
[    1.681929] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    1.697102] systemd[1]: Detected architecture x86-64.
[    1.701570] systemd[1]: Set hostname to <port>.
[    1.810094] random: systemd: uninitialized urandom read (16 bytes read)
[    1.810201] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.810248] random: systemd: uninitialized urandom read (16 bytes read)
[    1.810349] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.810367] random: systemd: uninitialized urandom read (16 bytes read)
[    1.810434] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.810457] systemd[1]: Reached target Remote File Systems.
[    1.810548] systemd[1]: Listening on udev Control Socket.
[    1.813014] systemd[1]: Listening on Process Core Dump Socket.
[    1.814990] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    1.831666] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    1.891481] systemd-journald[224]: Received request to flush runtime journal from PID 1
[    1.968711] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.972465] EDAC ie31200: No ECC support
[    1.999118] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.000039] Linux agpgart interface v0.103
[    2.007883] Non-volatile memory driver v1.3
[    2.018124] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.018134] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.028297] r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0x        (ptrval), 08:9e:01:f6:e7:2e, XID 10900800 IRQ 27
[    2.028302] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.029467] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[    2.029468] thinkpad_acpi: http://ibm-acpi.sf.net/
[    2.029470] thinkpad_acpi: ThinkPad BIOS J7ET61WW (2.06 ), EC unknown
[    2.029471] thinkpad_acpi: Lenovo LENOVO, model B5400  
[    2.031927] media: Linux media interface: v0.10
[    2.045821] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    2.045853] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.053376] thinkpad_acpi: radio switch found; radios are enabled
[    2.053518] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    2.053815] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    2.053816] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    2.067906] ACPI: Battery Slot [BAT1] (battery present)
[    2.078159] Linux video capture interface: v2.00
[    2.088634] Adding 8388604k swap on /dev/sda2.  Priority:-2 extents:1 across:8388604k SSFS
[    2.099244] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3239: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    2.099249] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.099252] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    2.099254] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    2.099255] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    2.099258] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x1a
[    2.099260] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[    2.103534] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    2.106161] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    2.106246] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    2.115683] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
[    2.115686] thinkpad_acpi: Error probing battery 2
[    2.115791] battery: extension failed to load: ThinkPad Battery Extension
[    2.115795] battery: extension unregistered: ThinkPad Battery Extension
[    2.115923] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[    2.136660] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    2.137066] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.137256] rtc_cmos rtc_cmos: registered as rtc0
[    2.137281] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.137463] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2fa)
[    2.139937] uvcvideo 2-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[    2.139940] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[    2.139943] uvcvideo 2-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[    2.140069] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9
[    2.140150] usbcore: registered new interface driver uvcvideo
[    2.140151] USB Video Class driver (1.1.1)
[    2.152278] Bluetooth: Core ver 2.22
[    2.152293] NET: Registered protocol family 31
[    2.152294] Bluetooth: HCI device and connection manager initialized
[    2.152297] Bluetooth: HCI socket layer initialized
[    2.152299] Bluetooth: L2CAP socket layer initialized
[    2.152304] Bluetooth: SCO socket layer initialized
[    2.166777] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    2.166780] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.166781] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.166782] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.166783] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.170367] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[    2.170549] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    2.170658] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    2.199874] ACPI: AC Adapter [ACAD] (on-line)
[    2.214262] cryptd: max_cpu_qlen set to 1000
[    2.214668] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.215219] usbcore: registered new interface driver btusb
[    2.224664] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.225317] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[    2.225320] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[    2.225363] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.225365] cfg80211: failed to load regulatory.db
[    2.226764] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[    2.226768] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[    2.228312] Bluetooth: hci0: rom_version status=0 version=1
[    2.228318] Bluetooth: hci0: cfg_sz 0, total size 22496
[    2.239647] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[    2.243618] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[    2.262407] iTCO_vendor_support: vendor-support=0
[    2.263765] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.263817] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    2.263949] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.266088] gpio_ich: GPIO from 436 to 511 on gpio_ich
[    2.317639] r8169 0000:05:00.0 enp5s0: renamed from eth0
[    2.363614] [drm] Replacing VGA console driver
[    2.364685] Console: switching to colour dummy device 80x25
[    2.364751] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[    2.373167] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.373169] [drm] Driver supports precise vblank timestamp query.
[    2.378540] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.378561] 8021q: 802.1Q VLAN Support v1.8
[    2.405123] intel-spi intel-spi: s25fl064k (8192 Kbytes)
[    2.420464] Creating 1 MTD partitions on "intel-spi":
[    2.420469] 0x000000000000-0x000000800000 : "BIOS"
[    2.420925] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[    2.423707] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.424040] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[    2.424204] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.438032] fbcon: inteldrmfb (fb0) is primary device
[    2.458642] r8169 0000:05:00.0 enp5s0: link down
[    2.458644] r8169 0000:05:00.0 enp5s0: link down
[    2.489778] intel_rapl: Found RAPL domain package
[    2.489779] intel_rapl: Found RAPL domain core
[    2.489781] intel_rapl: Found RAPL domain uncore
[    2.489782] intel_rapl: Found RAPL domain dram
[    2.547912] rtl8723be: watchdog disabled
[    2.547938] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[    2.551333] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    2.551597] rtlwifi: rtlwifi: wireless switch is on
[    2.553468] rtl8723be 0000:04:00.0 wlp4s0: renamed from wlan0
[    3.068784] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4902]
[    3.146317] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1695, fw id: 739436
[    3.195742] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[    3.214640] mousedev: PS/2 mouse device common for all mice
[    3.360098] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[    3.368597] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    3.555351] Console: switching to colour frame buffer device 170x48
[    3.573979] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.621345] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    3.621415] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    3.621477] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    3.621535] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    3.621596] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    3.878607] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    3.952701] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    5.565872] r8169 0000:05:00.0 enp5s0: link up
[    5.565890] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[   19.474850] random: crng init done
[   19.474856] random: 7 urandom warning(s) missed due to ratelimiting

seth · 2018-06-23 20:23:19

If there's a sysctl to set them 3333 (default should be 4414), then how do you end up with a console_loglevel of 15?
What happens for a

sysctl kernel.printk="4 4 1 4"
sysctl kernel.printk="1 1 1 1"

Edit: of course try them one by one (ie. check 4414 first and only if the messages remain showing up go to 1111)

Last edited by seth (2018-06-23 20:24:38)

loqs · 2018-06-23 20:29:15

https://bbs.archlinux.org/viewtopic.php?id=236696

PausBenedictus · 2018-06-23 20:30:20

seth wrote:

If there's a sysctl to set them 3333 (default should be 4414), then how do you end up with a console_loglevel of 15?
What happens for a
sysctl kernel.printk="4 4 1 4"
sysctl kernel.printk="1 1 1 1"
Edit: of course try them one by one (ie. check 4414 first and only if the messages remain showing up go to 1111)

these values seems to work for one session, but since I can't shutdown properly (see OP) I have to press the shutdown button for some seconds to shut down the machine.
On a reboot, the numbers seem to have reverted to 15 3 3 3.

seth · 2018-06-23 20:33:58

So where does the "15" stem from - hint: look into /etc/sysctl.d/ and try to remove the 20-quiet-printk.conf (I'm not sure whether the sysctl.d entries work w/o quotes)

PausBenedictus · 2018-06-23 20:39:12

seth wrote:

So where does the "15" stem from - hint: look into /etc/sysctl.d/ and try to remove the 20-quiet-printk.conf (I'm not sure whether the sysctl.d entries work w/o quotes)

Removing the 20-quiet-printk.conf entry and running

sysctl kernel.printk="4 4 1 4"

then rebooting results in values of 15 4 1 4

seth · 2018-06-23 20:44:14

4414 is the suposed default - so something™ sets the console_loglevel to 15 after 20-quiet-printk.conf adjusts/ed it.
Natural contenders would be other snippets in /etc/sysctl.d/ but actually anything can do this by invoking sysctl in some script. It especially looks like a mistake, since "15" is nonsense.

loqs · 2018-06-23 20:49:43

man 2 syslog wrote:

/proc/sys/kernel/printk
/proc/sys/kernel/printk is a writable file containing four integer val‐
ues that influence kernel printk() behavior when printing or logging
error messages. The four values are:
console_loglevel
Only messages with a log level lower than this value will be
printed to the console. The default value for this field is
DEFAULT_CONSOLE_LOGLEVEL (7), but it is set to 4 if the kernel
command line contains the word "quiet", 10 if the kernel command
line contains the word "debug", and to 15 in case of a kernel
fault (the 10 and 15 are just silly, and equivalent to 8). The
value of console_loglevel can be set (to a value in the range
1–8) by a syslog() call with a type of 8.

Auto set to 15 by kernel fault?

PausBenedictus · 2018-06-23 21:05:45

seth wrote:

4414 is the suposed default - so something™ sets the console_loglevel to 15 after 20-quiet-printk.conf adjusts/ed it.
Natural contenders would be other snippets in /etc/sysctl.d/ but actually anything can do this by invoking sysctl in some script. It especially looks like a mistake, since "15" is nonsense.

I just did a fresh reinstall with the command I mentioned above, excluding the installation of the networkmanager.

First boot, I got the same error, dmesg logs jumping into my login prompt.

I did

cat /proc/sys/kernel/printk

and it yielded 15 4 1 4

seth · 2018-06-23 21:07:56

Cool - "just silly" ;-)
That would certainly explain the failing shutdown, but do you see traces of one in the provided dmesg?

PausBenedictus · 2018-06-23 21:25:58

seth wrote:

Cool - "just silly" ;-)
That would certainly explain the failing shutdown, but do you see traces of one in the provided dmesg?

So there is a kernel fault happening somewhere? I don't see anything in the dmesg logs that could explain this.

seth · 2018-06-23 21:58:14

That is a possible and reasonable solution, though I neither see traces of a fault.
However there's a fault injection function, ie. a module can trigger this w/o there actually being any "real" fault.

Wild guess: blacklist iTCO_wdt

PausBenedictus · 2018-06-23 22:11:47

seth wrote:

That is a possible and reasonable solution, though I neither see traces of a fault.
However there's a fault injection function, ie. a module can trigger this w/o there actually being any "real" fault.
Wild guess: blacklist iTCO_wdt

I tried this to no avail. However, I decided to run dmesg again and got quite a different output. Perhaps the priorly posted dmesg log was of a non-faulty instance.

Here is the last dmesg:

[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[    0.000000] Linux version 4.17.2-1-ARCH (builduser@heftig-9574) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Sat Jun 16 11:08:59 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6d18aa43-7f25-4ab2-a4a2-a9d1fbab3615 rw quiet intel_iommu=off
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d20bcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d20bd000-0x00000000dceeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dceef000-0x00000000dcf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO B5400  /B5400  , BIOS J7ET61WW (2.06 ) 03/03/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   1 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xd20bd max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1d660000, 0x1d660fff] PGTABLE
[    0.000000] BRK [0x1d661000, 0x1d661fff] PGTABLE
[    0.000000] BRK [0x1d662000, 0x1d662fff] PGTABLE
[    0.000000] BRK [0x1d663000, 0x1d663fff] PGTABLE
[    0.000000] BRK [0x1d664000, 0x1d664fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36e3d000-0x37715fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DCFFE170 0000B4 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: DSDT 0x00000000DCFE7000 0102D9 (v02 LENOVO HSW-LPT  00000000 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DCF97000 000040
[    0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: APIC 0x00000000DCFF9000 000098 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: MCFG 0x00000000DCFF8000 00003C (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000DCFE5000 001664 (v01 LENOVO PtidDevc 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCFE4000 0004E1 (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCFE3000 000539 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCFE2000 000AD8 (v01 LENOVO CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCFDE000 00355E (v01 LENOVO SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCFDD000 00036F (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.000000] ACPI: PCCT 0x00000000DCFDC000 00006E (v05 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000DCFDB000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.000000] ACPI: UEFI 0x00000000DCFDA000 000042 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: MSDM 0x00000000DCF6F000 000055 (v03 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000DCFD9000 00003E (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: FPDT 0x00000000DCFD8000 000064 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000DCFD7000 0002E2 (v01 LENOVO TP-J7    00002060 PTEC 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21f5fa000-0x21f5fdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000d20bcfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff]
[    0.000000] On node 0 totalpages: 2037337
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13379 pages used for memmap
[    0.000000]   DMA32 zone: 856253 pages, LIFO batch:31
[    0.000000]   Normal zone: 18392 pages used for memmap
[    0.000000]   Normal zone: 1177088 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd20bd000-0xdceeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdceef000-0xdcf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdcfff000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2005481
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6d18aa43-7f25-4ab2-a4a2-a9d1fbab3615 rw quiet intel_iommu=off
[    0.000000] DMAR: IOMMU disabled
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7920720K/8149348K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 228628K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 32647 entries in 128 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 2394.295 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22832a689dc, max_idle_ns: 440795320565 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.11 BogoMIPS (lpj=7980983)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.019999] Security Framework initialized
[    0.019999] Yama: becoming mindful.
[    0.023357] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023958] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.023989] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024008] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024214] CPU: Physical Processor ID: 0
[    0.024215] CPU: Processor Core ID: 0
[    0.024220] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024220] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024224] mce: CPU supports 7 MCE banks
[    0.024239] process: using mwait in idle threads
[    0.024242] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.024243] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.024244] Spectre V2 : Mitigation: Full generic retpoline
[    0.024244] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.024245] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.024245] Speculative Store Bypass: Vulnerable
[    0.024338] Freeing SMP alternatives memory: 28K
[    0.026733] TSC deadline timer enabled
[    0.026737] smpboot: CPU0: Intel(R) Core(TM) i3-4000M CPU @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.043340] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.043376] ... version:                3
[    0.043377] ... bit width:              48
[    0.043378] ... generic registers:      4
[    0.043379] ... value mask:             0000ffffffffffff
[    0.043379] ... max period:             00007fffffffffff
[    0.043380] ... fixed-purpose events:   3
[    0.043380] ... event mask:             000000070000000f
[    0.046672] Hierarchical SRCU implementation.
[    0.056925] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.060009] smp: Bringing up secondary CPUs ...
[    0.083345] x86: Booting SMP configuration:
[    0.083346] .... node  #0, CPUs:      #1 #2 #3
[    0.130325] smp: Brought up 1 node, 4 CPUs
[    0.130325] smpboot: Max logical packages: 2
[    0.130325] smpboot: Total of 4 processors activated (19162.45 BogoMIPS)
[    0.133604] devtmpfs: initialized
[    0.133604] x86/mm: Memory block size: 128MB
[    0.133978] PM: Registering ACPI NVS region [mem 0xdceef000-0xdcf9efff] (720896 bytes)
[    0.133978] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.133978] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.133978] pinctrl core: initialized pinctrl subsystem
[    0.133978] RTC time: 22:07:35, date: 06/23/18
[    0.133978] NET: Registered protocol family 16
[    0.133978] cpuidle: using governor ladder
[    0.136673] cpuidle: using governor menu
[    0.136673] Error parsing PCC subspaces from PCCT
[    0.136749] ACPI: bus type PCI registered
[    0.136750] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.136809] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.136815] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.136815] PCI: Using configuration type 1 for base access
[    0.136816] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.137532] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.137532] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.137532] ACPI: Added _OSI(Module Device)
[    0.137532] ACPI: Added _OSI(Processor Device)
[    0.137532] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.137532] ACPI: Added _OSI(Processor Aggregator Device)
[    0.137532] ACPI: Added _OSI(Linux-Dell-Video)
[    0.156668] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.159647] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.164263] ACPI: Dynamic OEM Table Load:
[    0.164263] ACPI: SSDT 0xFFFFA0E895402000 000474 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.164267] ACPI: Dynamic OEM Table Load:
[    0.164267] ACPI: SSDT 0xFFFFA0E895B94000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.164307] ACPI: Dynamic OEM Table Load:
[    0.164307] ACPI: SSDT 0xFFFFA0E8955FF400 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.167007] ACPI: EC: EC started
[    0.167008] ACPI: EC: interrupt blocked
[    0.171072] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.171074] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.171075] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.171076] ACPI: Interpreter enabled
[    0.171112] ACPI: (supports S0 S3 S4 S5)
[    0.171113] ACPI: Using IOAPIC for interrupt routing
[    0.171146] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.171377] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.178388] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[    0.186814] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.186820] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.187010] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.187861] PCI host bridge to bus 0000:00
[    0.187863] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.187864] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.187866] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.187869] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.187871] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.187879] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.188082] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.188093] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.188099] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.188104] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.188298] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.188308] pci 0000:00:03.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
[    0.188532] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.188553] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
[    0.188613] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.188800] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.188822] pci 0000:00:16.0: reg 0x10: [mem 0xf0619000-0xf061900f 64bit]
[    0.188885] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.189076] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.189098] pci 0000:00:1a.0: reg 0x10: [mem 0xf061e000-0xf061e3ff]
[    0.189179] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.189369] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.189389] pci 0000:00:1b.0: reg 0x10: [mem 0xf0614000-0xf0617fff 64bit]
[    0.189458] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.189643] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.189716] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.189964] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.190039] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.190283] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.190356] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.190601] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.190623] pci 0000:00:1d.0: reg 0x10: [mem 0xf061d000-0xf061d3ff]
[    0.190706] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.190897] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.191180] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.191198] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.191205] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.191212] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.191220] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.191227] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.191234] pci 0000:00:1f.2: reg 0x24: [mem 0xf061c000-0xf061c7ff]
[    0.191271] pci 0000:00:1f.2: PME# supported from D3hot
[    0.191450] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.191469] pci 0000:00:1f.3: reg 0x10: [mem 0xf0618000-0xf06180ff 64bit]
[    0.191489] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.191733] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.191818] pci 0000:04:00.0: [10ec:b723] type 00 class 0x028000
[    0.191871] pci 0000:04:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.191918] pci 0000:04:00.0: reg 0x18: [mem 0xf0500000-0xf0503fff 64bit]
[    0.192103] pci 0000:04:00.0: supports D1 D2
[    0.192105] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.192284] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.192288] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.192292] pci 0000:00:1c.2:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.192367] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.192399] pci 0000:05:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.192427] pci 0000:05:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit]
[    0.192445] pci 0000:05:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit]
[    0.192547] pci 0000:05:00.0: supports D1 D2
[    0.192549] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.192750] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.192753] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.192757] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.193422] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.193491] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.193559] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.193625] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.193690] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.193756] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.193822] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.193887] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.201819] ACPI: EC: interrupt unblocked
[    0.201834] ACPI: EC: event unblocked
[    0.201841] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.201843] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.201913] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.201913] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.201913] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.201913] vgaarb: loaded
[    0.201913] pps_core: LinuxPPS API ver. 1 registered
[    0.201913] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.201913] PTP clock support registered
[    0.201913] EDAC MC: Ver: 3.0.0
[    0.201913] PCI: Using ACPI for IRQ routing
[    0.203628] PCI: pci_cache_line_size set to 64 bytes
[    0.203682] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.203683] e820: reserve RAM buffer [mem 0xd20bd000-0xd3ffffff]
[    0.203684] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[    0.203766] NetLabel: Initializing
[    0.203767] NetLabel:  domain hash size = 128
[    0.203767] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.203780] NetLabel:  unlabeled traffic allowed by default
[    0.203783] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.203783] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.205673] clocksource: Switched to clocksource tsc-early
[    0.213689] VFS: Disk quotas dquot_6.6.0
[    0.213708] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.213776] pnp: PnP ACPI init
[    0.213851] pnp 00:00: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.213873] pnp 00:01: Plug and Play ACPI device, IDs SYN2a14 SYN2a00 PNP0f13 (active)
[    0.214103] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.214105] system 00:02: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.214107] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.214108] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.214110] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.214112] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.214113] system 00:02: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.214115] system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.214116] system 00:02: [mem 0xff000000-0xffffffff] could not be reserved
[    0.214118] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.214119] system 00:02: [mem 0xfffff000-0xffffffff] has been reserved
[    0.214121] system 00:02: [mem 0xdfa10000-0xdfa1ffff] has been reserved
[    0.214126] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.217223] pnp: PnP ACPI: found 3 devices
[    0.222845] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.222874] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.222886] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.222889] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.222894] pci 0000:00:1c.2:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.222902] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.222904] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.222909] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.222917] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.222919] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.222920] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.222922] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[    0.222923] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.222925] pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.222926] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.222928] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.223056] NET: Registered protocol family 2
[    0.223192] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.223220] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.223314] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.223440] TCP: Hash tables configured (established 65536 bind 65536)
[    0.223476] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.223498] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.223549] NET: Registered protocol family 1
[    0.223560] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.223648] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.223650] pci 0000:00:14.0: PCI INT A: no GSI
[    0.224010] PCI: CLS 64 bytes, default 64
[    0.224041] Unpacking initramfs...
[    0.334728] Freeing initrd memory: 9060K
[    0.334733] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.334736] software IO TLB [mem 0xce0bd000-0xd20bd000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.334807] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.334829] Scanning for low memory corruption every 60 seconds
[    0.335345] Initialise system trusted keyrings
[    0.335353] Key type blacklist registered
[    0.335404] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.336498] zbud: loaded
[    0.336802] pstore: using lz4hc compression
[    0.337732] Key type asymmetric registered
[    0.337734] Asymmetric key parser 'x509' registered
[    0.337764] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.337792] io scheduler noop registered
[    0.337793] io scheduler deadline registered
[    0.337830] io scheduler cfq registered (default)
[    0.337831] io scheduler mq-deadline registered
[    0.337831] io scheduler kyber registered
[    0.337837] io scheduler bfq registered
[    0.338399] intel_idle: MWAIT substates: 0x42120
[    0.338401] intel_idle: v0.4.1 model 0x3C
[    0.338545] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.338605] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.338616] ACPI: Lid Switch [LID]
[    0.338649] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.338657] ACPI: Power Button [PWRB]
[    0.338685] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.338691] ACPI: Sleep Button [SLPB]
[    0.338719] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.338723] ACPI: Power Button [PWRF]
[    0.350496] thermal LNXTHERM:00: registered as thermal_zone0
[    0.350499] ACPI: Thermal Zone [TZ00] (61 C)
[    0.350767] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.352025] intel_pstate: Intel P-state driver initializing
[    0.352168] ledtrig-cpu: registered to indicate activity on CPUs
[    0.352795] NET: Registered protocol family 10
[    0.361642] Segment Routing with IPv6
[    0.361693] NET: Registered protocol family 17
[    0.362260] RAS: Correctable Errors collector initialized.
[    0.362347] microcode: sig=0x306c3, pf=0x10, revision=0x24
[    0.362469] microcode: Microcode Update Driver: v2.2.
[    0.362493] sched_clock: Marking stable (362455738, 0)->(352288699, 10167039)
[    0.363030] registered taskstats version 1
[    0.363054] Loading compiled-in X.509 certificates
[    0.363092] zswap: loaded using pool lzo/zbud
[    0.367015] Key type big_key registered
[    0.367615]   Magic number: 6:129:149
[    0.367669] hctosys: unable to open rtc device (rtc0)
[    0.369546] Freeing unused kernel memory: 1476K
[    0.369548] Write protecting the kernel read-only data: 16384k
[    0.370020] Freeing unused kernel memory: 2016K
[    0.371504] Freeing unused kernel memory: 608K
[    0.440814] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.453056] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.453118] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.457839] ACPI: bus type USB registered
[    0.457864] usbcore: registered new interface driver usbfs
[    0.457875] usbcore: registered new interface driver hub
[    0.457913] usbcore: registered new device driver usb
[    0.460261] SCSI subsystem initialized
[    0.460536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.462748] ehci-pci: EHCI PCI platform driver
[    0.462965] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.462974] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.462988] ehci-pci 0000:00:1a.0: debug port 2
[    0.466914] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.466930] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061e000
[    0.473373] libata version 3.00 loaded.
[    0.480014] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.480065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.480067] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.480068] usb usb1: Product: EHCI Host Controller
[    0.480070] usb usb1: Manufacturer: Linux 4.17.2-1-ARCH ehci_hcd
[    0.480071] usb usb1: SerialNumber: 0000:00:1a.0
[    0.480190] hub 1-0:1.0: USB hub found
[    0.480197] hub 1-0:1.0: 3 ports detected
[    0.480546] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.480552] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.480565] ehci-pci 0000:00:1d.0: debug port 2
[    0.484457] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.484469] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf061d000
[    0.487590] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.496756] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.496854] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.496858] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.496860] usb usb2: Product: EHCI Host Controller
[    0.496863] usb usb2: Manufacturer: Linux 4.17.2-1-ARCH ehci_hcd
[    0.496865] usb usb2: SerialNumber: 0000:00:1d.0
[    0.497222] hub 2-0:1.0: USB hub found
[    0.497239] hub 2-0:1.0: 3 ports detected
[    0.497924] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    0.497927] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    0.497974] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.497984] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.499107] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.499123] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.499388] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.499393] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.499397] usb usb3: Product: xHCI Host Controller
[    0.499400] usb usb3: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
[    0.499404] usb usb3: SerialNumber: 0000:00:14.0
[    0.499714] hub 3-0:1.0: USB hub found
[    0.499745] hub 3-0:1.0: 14 ports detected
[    0.505492] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.505498] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.505504] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.505573] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    0.505576] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.505578] usb usb4: Product: xHCI Host Controller
[    0.505581] usb usb4: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
[    0.505583] usb usb4: SerialNumber: 0000:00:14.0
[    0.505772] hub 4-0:1.0: USB hub found
[    0.505788] hub 4-0:1.0: 4 ports detected
[    0.506601] ahci 0000:00:1f.2: version 3.0
[    0.506982] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[    0.506990] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.517260] scsi host0: ahci
[    0.517446] scsi host1: ahci
[    0.517603] scsi host2: ahci
[    0.517712] scsi host3: ahci
[    0.517805] scsi host4: ahci
[    0.517864] ata1: DUMMY
[    0.517866] ata2: DUMMY
[    0.517869] ata3: SATA max UDMA/133 abar m2048@0xf061c000 port 0xf061c200 irq 25
[    0.517870] ata4: DUMMY
[    0.517874] ata5: SATA max UDMA/133 abar m2048@0xf061c000 port 0xf061c300 irq 25
[    0.810107] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.826770] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.833449] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.833503] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.833943] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    0.833952] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    0.833958] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    0.834270] ata5.00: ATA-11: KINGSTON SA400S37120G, SBFK71E0, max UDMA/133
[    0.834276] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.834681] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    0.834689] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    0.834695] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    0.834796] ata5.00: configured for UDMA/133
[    0.840574] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    0.840581] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    0.840588] ata3.00: ATAPI: MATSHITA DVD-RAM UJ8DB, 8.51, max UDMA/100
[    0.852590] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    0.852599] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    0.852615] ata3.00: configured for UDMA/100
[    0.872219] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8DB    8.51 PQ: 0 ANSI: 5
[    0.902425] scsi 4:0:0:0: Direct-Access     ATA      KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5
[    0.911925] sd 4:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    0.911934] sd 4:0:0:0: [sda] Write Protect is off
[    0.911936] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.911948] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.912502]  sda: sda1 sda2 sda3 sda4
[    0.912770] sd 4:0:0:0: [sda] Attached SCSI disk
[    0.947702] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.947704] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.947815] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    0.960442] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
[    0.960445] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.960691] hub 1-1:1.0: USB hub found
[    0.960760] hub 1-1:1.0: 6 ports detected
[    0.977314] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    0.977318] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.977575] hub 2-1:1.0: USB hub found
[    0.977636] hub 2-1:1.0: 8 ports detected
[    1.226972] random: fast init done
[    1.240044] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    1.256692] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    1.339549] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=b728, bcdDevice= 2.00
[    1.339554] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.339556] usb 1-1.3: Product: Bluetooth Radio 
[    1.339558] usb 1-1.3: Manufacturer: Realtek 
[    1.339561] usb 1-1.3: SerialNumber: 00e04c000001
[    1.360086] tsc: Refined TSC clocksource calibration: 2394.455 MHz
[    1.360102] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c1579c6, max_idle_ns: 440795259439 ns
[    1.360127] clocksource: Switched to clocksource tsc
[    1.364681] usb 2-1.5: New USB device found, idVendor=04f2, idProduct=b2fa, bcdDevice=39.52
[    1.364689] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.364695] usb 2-1.5: Product: Integrated Camera
[    1.364699] usb 2-1.5: Manufacturer: Vimicro corp.
[    1.380113] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    1.536737] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    1.553681] systemd[1]: Detected architecture x86-64.
[    1.557572] systemd[1]: Set hostname to <port>.
[    1.652575] random: systemd: uninitialized urandom read (16 bytes read)
[    1.652647] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.652713] random: systemd: uninitialized urandom read (16 bytes read)
[    1.652766] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.652785] random: systemd: uninitialized urandom read (16 bytes read)
[    1.652859] systemd[1]: Listening on udev Control Socket.
[    1.652921] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.652979] systemd[1]: Listening on udev Kernel Socket.
[    1.655008] systemd[1]: Listening on Process Core Dump Socket.
[    1.656709] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    1.685808] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    1.737837] systemd-journald[227]: Received request to flush runtime journal from PID 1
[    1.807907] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.817701] EDAC ie31200: No ECC support
[    1.848808] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.851849] Linux agpgart interface v0.103
[    1.866373] media: Linux media interface: v0.10
[    1.871138] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.871171] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.876701] Non-volatile memory driver v1.3
[    1.891177] Linux video capture interface: v2.00
[    1.892595] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.892607] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.901198] r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0x        (ptrval), 08:9e:01:f6:e7:2e, XID 10900800 IRQ 27
[    1.901202] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.907885] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[    1.907887] thinkpad_acpi: http://ibm-acpi.sf.net/
[    1.907888] thinkpad_acpi: ThinkPad BIOS J7ET61WW (2.06 ), EC unknown
[    1.907889] thinkpad_acpi: Lenovo LENOVO, model B5400  
[    1.916457] thinkpad_acpi: radio switch found; radios are enabled
[    1.916478] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    1.916718] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    1.916719] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    1.926943] ACPI: AC Adapter [ACAD] (on-line)
[    1.937926] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    1.953977] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    1.959935] Adding 8388604k swap on /dev/sda2.  Priority:-2 extents:1 across:8388604k SSFS
[    1.960214] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    1.960308] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.960331] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    1.960509] rtc_cmos rtc_cmos: registered as rtc0
[    1.960537] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.961075] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2fa)
[    1.963931] uvcvideo 2-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[    1.963935] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[    1.963937] uvcvideo 2-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[    1.964037] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8
[    1.964161] usbcore: registered new interface driver uvcvideo
[    1.964162] USB Video Class driver (1.1.1)
[    1.982294] battery: new extension: ThinkPad Battery Extension
[    1.982359] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[    1.990263] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    1.990266] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    1.990267] RAPL PMU: hw unit of domain package 2^-14 Joules
[    1.990268] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    1.990269] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.017871] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.021446] Bluetooth: Core ver 2.22
[    2.021464] NET: Registered protocol family 31
[    2.021466] Bluetooth: HCI device and connection manager initialized
[    2.021470] Bluetooth: HCI socket layer initialized
[    2.021472] Bluetooth: L2CAP socket layer initialized
[    2.021479] Bluetooth: SCO socket layer initialized
[    2.027640] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.029457] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.029460] cfg80211: failed to load regulatory.db
[    2.037921] cryptd: max_cpu_qlen set to 1000
[    2.056626] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3239: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    2.056630] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.056633] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    2.056635] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    2.056637] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    2.056639] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x1a
[    2.056642] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[    2.074490] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[    2.111497] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    2.112371] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    2.112439] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    2.125335] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[    2.150466] usbcore: registered new interface driver btusb
[    2.160301] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[    2.160305] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[    2.161780] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[    2.161784] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[    2.163297] Bluetooth: hci0: rom_version status=0 version=1
[    2.163304] Bluetooth: hci0: cfg_sz 0, total size 22496
[    2.180803] gpio_ich: GPIO from 436 to 511 on gpio_ich
[    2.202802] r8169 0000:05:00.0 enp5s0: renamed from eth0
[    2.203878] intel-spi intel-spi: s25fl064k (8192 Kbytes)
[    2.226630] Creating 1 MTD partitions on "intel-spi":
[    2.226635] 0x000000000000-0x000000800000 : "BIOS"
[    2.250117] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
[    2.250119] thinkpad_acpi: Error probing battery 2
[    2.250260] battery: extension unregistered: ThinkPad Battery Extension
[    2.250261] battery: error in extension, unloading: ThinkPad Battery Extension
[    2.250268] stack segment: 0000 [#1] PREEMPT SMP PTI
[    2.250457] Modules linked in: ofpart cmdlinepart intel_spi_platform wmi_bmof intel_spi spi_nor mtd gpio_ich rtl8723_common rtl_pci rtlwifi mac80211 irqbypass crct10dif_pclmul btusb snd_hda_codec_realtek btrtl crc32_pclmul btbcm i2c_algo_bit snd_hda_codec_generic ghash_clmulni_intel btintel cryptd intel_cstate drm_kms_helper snd_hda_intel intel_uncore cfg80211 psmouse snd_hda_codec bluetooth intel_rapl_perf rtc_cmos uvcvideo drm pcspkr input_leds videobuf2_vmalloc snd_hda_core videobuf2_memops videobuf2_v4l2 snd_hwdep thinkpad_acpi videobuf2_common snd_pcm r8169 videodev ecdh_generic nvram i2c_i801 snd_timer intel_gtt rfkill media agpgart lpc_ich wmi battery snd mii syscopyarea evdev mei_me sysfillrect sysimgblt mei led_class soundcore fb_sys_fops ie31200_edac ac mac_hid shpchp ip_tables x_tables
[    2.250687]  ext4 crc32c_generic crc16 mbcache jbd2 fscrypto sr_mod sd_mod cdrom serio_raw atkbd ahci libps2 libahci xhci_pci libata ehci_pci crc32c_intel xhci_hcd ehci_hcd usbcore scsi_mod usb_common i8042 serio
[    2.250888] CPU: 1 PID: 165 Comm: kworker/u16:2 Not tainted 4.17.2-1-ARCH #1
[    2.250991] Hardware name: LENOVO B5400  /B5400  , BIOS J7ET61WW (2.06 ) 03/03/2014
[    2.251158] Workqueue: events_unbound async_run_entry_fn
[    2.251268] RIP: 0010:sysfs_add_battery+0x11a/0x190 [battery]
[    2.251371] RSP: 0000:ffffa8a141167ce0 EFLAGS: 00010283
[    2.251474] RAX: dead000000000100 RBX: ffffa0e893562600 RCX: 0000000000000001
[    2.251579] RDX: 0000000000000000 RSI: 0000000000000086 RDI: ffffa0e894f28c00
[    2.251685] RBP: dead0000000000e8 R08: 0000000658a13830 R09: 00000000000002b1
[    2.251789] R10: ffffffff895ef6e0 R11: 0000000000000004 R12: ffffffffc0460278
[    2.251892] R13: 0000000000000000 R14: 0000000000000023 R15: ffffa0e89291a780
[    2.251996] FS:  0000000000000000(0000) GS:ffffa0e89f240000(0000) knlGS:0000000000000000
[    2.252157] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.252260] CR2: 00007f7eab8a7bf0 CR3: 000000001d00a005 CR4: 00000000001606e0
[    2.252365] Call Trace:
[    2.252473]  acpi_battery_update+0x1c1/0x2c0 [battery]
[    2.252581]  acpi_battery_add+0xc9/0x180 [battery]
[    2.252685]  acpi_device_probe+0x4a/0x1d0
[    2.252787]  driver_probe_device+0x2b9/0x460
[    2.252888]  __driver_attach+0xb6/0xe0
[    2.252988]  ? driver_probe_device+0x460/0x460
[    2.253088]  bus_for_each_dev+0x76/0xc0
[    2.253187]  bus_add_driver+0x152/0x230
[    2.253286]  driver_register+0x6b/0xb0
[    2.253388]  acpi_battery_init_async+0x4b/0x55 [battery]
[    2.253492]  async_run_entry_fn+0x37/0x140
[    2.253593]  process_one_work+0x1d1/0x3b0
[    2.253692]  worker_thread+0x2b/0x3d0
[    2.253791]  ? process_one_work+0x3b0/0x3b0
[    2.253892]  kthread+0x112/0x130
[    2.253992]  ? kthread_flush_work_fn+0x10/0x10
[    2.254096]  ret_from_fork+0x35/0x40
[    2.254197] Code: 00 00 48 89 93 b8 00 00 00 48 c7 83 c0 00 00 00 90 21 46 c0 48 8d 68 e8 48 3d 80 21 46 c0 74 28 49 c7 c4 78 02 46 c0 48 8b 7b 40 <48> 8b 45 08 e8 cd 44 5a c8 85 c0 75 4a 48 8b 45 18 48 8d 68 e8 
[    2.254479] RIP: sysfs_add_battery+0x11a/0x190 [battery] RSP: ffffa8a141167ce0
[    2.256599] ---[ end trace 27c423bbeff08af2 ]---
[    2.278837] [drm] Replacing VGA console driver
[    2.280162] Console: switching to colour dummy device 80x25
[    2.280269] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[    2.281063] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.281070] [drm] Driver supports precise vblank timestamp query.
[    2.281930] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.312646] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[    2.318673] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[    2.321322] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.321659] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[    2.321911] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.327957] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    2.328347] rtlwifi: rtlwifi: wireless switch is on
[    2.330921] rtl8723be 0000:04:00.0 wlp4s0: renamed from wlan0
[    2.335036] fbcon: inteldrmfb (fb0) is primary device
[    2.355414] intel_rapl: Found RAPL domain package
[    2.355416] intel_rapl: Found RAPL domain core
[    2.355417] intel_rapl: Found RAPL domain uncore
[    2.355418] intel_rapl: Found RAPL domain dram
[    2.500793] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[    2.543643] r8169 0000:05:00.0 enp5s0: link down
[    2.543645] r8169 0000:05:00.0 enp5s0: link down
[    2.543742] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[    2.557336] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    2.886831] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4902]
[    2.964387] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1695, fw id: 739436
[    3.013766] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[    3.031378] mousedev: PS/2 mouse device common for all mice
[    3.311689] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    3.448692] Console: switching to colour frame buffer device 170x48
[    3.467635] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.824303] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    3.910990] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    5.492270] r8169 0000:05:00.0 enp5s0: link up
[    5.492326] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[   16.273186] random: crng init done
[   16.273250] random: 7 urandom warning(s) missed due to ratelimiting

seth · 2018-06-23 22:27:20

Could be https://www.spinics.net/lists/ibm-acpi- … 04479.html

PausBenedictus · 2018-06-23 22:43:37

seth wrote:

Could be https://www.spinics.net/lists/ibm-acpi- … 04479.html

I blacklisted thinkpad_acpi and ran 2 successful tests where kernel faults didn't happen. I'm running some post-install scripts now which are installing my wm, X etc. Let's hope that was it.

A bit weird that it tried calling a Thinkpad Battery Extension module while I'm on a Lenovo B5400 isn't it?

This has been an educational journey, thank you for all the spontaneous help, I'm looking forward to becoming part of this community.

PausBenedictus · 2018-06-23 22:50:09

loqs wrote:

man 2 syslog wrote:
/proc/sys/kernel/printk
/proc/sys/kernel/printk is a writable file containing four integer val‐
ues that influence kernel printk() behavior when printing or logging
error messages. The four values are:
console_loglevel
Only messages with a log level lower than this value will be
printed to the console. The default value for this field is
DEFAULT_CONSOLE_LOGLEVEL (7), but it is set to 4 if the kernel
command line contains the word "quiet", 10 if the kernel command
line contains the word "debug", and to 15 in case of a kernel
fault (the 10 and 15 are just silly, and equivalent to 8). The
value of console_loglevel can be set (to a value in the range
1–8) by a syslog() call with a type of 8.
Auto set to 15 by kernel fault?

Thanks for all the help too! This was definitely the golden tip!

Arch Linux

#1 2018-06-23 18:43:12

[SOLVED] dmesg output in login screen

#2 2018-06-23 19:03:10

Re: [SOLVED] dmesg output in login screen

#3 2018-06-23 19:20:32

Re: [SOLVED] dmesg output in login screen

#4 2018-06-23 19:41:26

Re: [SOLVED] dmesg output in login screen

#5 2018-06-23 19:43:24

Re: [SOLVED] dmesg output in login screen

#6 2018-06-23 19:43:51

Re: [SOLVED] dmesg output in login screen

#7 2018-06-23 19:50:59

Re: [SOLVED] dmesg output in login screen

#8 2018-06-23 20:21:10

Re: [SOLVED] dmesg output in login screen

#9 2018-06-23 20:23:19

Re: [SOLVED] dmesg output in login screen

#10 2018-06-23 20:29:15

Re: [SOLVED] dmesg output in login screen

#11 2018-06-23 20:30:20

Re: [SOLVED] dmesg output in login screen

#12 2018-06-23 20:33:58

Re: [SOLVED] dmesg output in login screen

#13 2018-06-23 20:39:12

Re: [SOLVED] dmesg output in login screen

#14 2018-06-23 20:44:14

Re: [SOLVED] dmesg output in login screen

#15 2018-06-23 20:49:43

Re: [SOLVED] dmesg output in login screen

#16 2018-06-23 21:05:45

Re: [SOLVED] dmesg output in login screen

#17 2018-06-23 21:07:56

Re: [SOLVED] dmesg output in login screen

#18 2018-06-23 21:25:58

Re: [SOLVED] dmesg output in login screen

#19 2018-06-23 21:58:14

Re: [SOLVED] dmesg output in login screen

#20 2018-06-23 22:11:47

Re: [SOLVED] dmesg output in login screen

#21 2018-06-23 22:27:20

Re: [SOLVED] dmesg output in login screen

#22 2018-06-23 22:43:37

Re: [SOLVED] dmesg output in login screen

#23 2018-06-23 22:50:09

Re: [SOLVED] dmesg output in login screen

Board footer