fail to suspend due to Device 0000:00:19.0, how can I fix this?

bayleader · 2018-06-30 13:32:12

journalctl -f shows this error

Jun 30 14:09:57 usar kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jun 30 14:09:57 usar kernel: sd 0:0:0:0: [sda] Stopping disk
Jun 30 14:09:57 usar kernel: e1000e: EEE TX LPI TIMER: 00000011
Jun 30 14:09:57 usar kernel: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x50 [e1000e] returns -2
Jun 30 14:09:57 usar kernel: dpm_run_callback(): pci_pm_suspend+0x0/0x120 returns -2
Jun 30 14:09:57 usar kernel: PM: Device 0000:00:19.0 failed to suspend async: error -2
Jun 30 14:09:57 usar kernel: PM: Some devices failed to suspend, or early wake event detected
Jun 30 14:09:57 usar kernel: sd 0:0:0:0: [sda] Starting disk
Jun 30 14:09:57 usar kernel: tpm tpm0: A TPM error (6) occurred attempting to read a pcr value

It makes me think Device 0000:00:19.0 is causing problems. Can anyone help me identify what this is and then edit a script so that this does not cause problems? Completely at a loss here

Last edited by bayleader (2018-06-30 13:45:13)

seth · 2018-06-30 13:47:35

"lspci"
e1000e is your ethernet, so stopping the network before the suspend might work. If so, you could add sleep hooks in /usr/lib/systemd/system-sleep/ to stop/start the network around S3.
Maybe you'll also have to unload the module.

Another reason could be activated WOL, so if you don't need that - disable it.

bayleader · 2018-06-30 13:58:10

Hi Seth,

sounds good. Do you know where I could find some example code to learn from? I don't know what sleephooks are but I'm assuming they are scripts which run during the suspend process. Also what is S3?

thanks

seth · 2018-06-30 14:03:23

/usr/lib/systemd/system-sleep/e1000e_workaround.sh

#!/bin/sh
case $1/$2 in
	pre/*)
        stop_network # you'll have to substitute with the proper action, depending on your network config
	modprobe -r e1000e
	;;
	post/*)
	modprobe e1000e
        start_network # you'll have to substitute with the proper action, depending on your network config
	;;
esac

The file needs to be executable.
S3 describes the "Suspend to RAM" sleep state (S4 is "hibernation"). WOL btw. means "wake on LAN"

bayleader · 2018-06-30 14:30:12

Hi Seth, that got rid of the e1000e error completely but now a different (and potentially unsolvable?) problem has come up

Jun 30 15:26:36 usar kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jun 30 15:26:36 usar kernel: sd 0:0:0:0: [sda] Stopping disk
Jun 30 15:26:36 usar kernel: e1000e: EEE TX LPI TIMER: 00000011
Jun 30 15:26:36 usar kernel: ACPI: EC: interrupt blocked
Jun 30 15:26:36 usar kernel: ACPI: Preparing to enter system sleep state S3
Jun 30 15:26:36 usar kernel: ACPI: EC: event blocked
Jun 30 15:26:36 usar kernel: ACPI: EC: EC stopped
Jun 30 15:26:36 usar kernel: PM: Saving platform NVS memory
Jun 30 15:26:36 usar kernel: Disabling non-boot CPUs ...
Jun 30 15:26:36 usar kernel: smpboot: CPU 1 is now offline
Jun 30 15:26:36 usar kernel: smpboot: CPU 2 is now offline
Jun 30 15:26:36 usar kernel: smpboot: CPU 3 is now offline
Jun 30 15:26:36 usar kernel: ACPI: Low-level resume complete
Jun 30 15:26:36 usar kernel: ACPI: EC: EC started
Jun 30 15:26:36 usar kernel: PM: Restoring platform NVS memory
Jun 30 15:26:36 usar kernel: Enabling non-boot CPUs ...
Jun 30 15:26:36 usar kernel: x86: Booting SMP configuration:
Jun 30 15:26:36 usar kernel: smpboot: Booting Node 0 Processor 1 APIC 0x1
Jun 30 15:26:36 usar kernel: cache: parent cpu1 should not be sleeping
Jun 30 15:26:36 usar kernel: CPU1 is up
Jun 30 15:26:36 usar kernel: smpboot: Booting Node 0 Processor 2 APIC 0x2
Jun 30 15:26:36 usar kernel: cache: parent cpu2 should not be sleeping
Jun 30 15:26:36 usar kernel: CPU2 is up
Jun 30 15:26:36 usar kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Jun 30 15:26:36 usar kernel: cache: parent cpu3 should not be sleeping
Jun 30 15:26:36 usar kernel: CPU3 is up
Jun 30 15:26:36 usar kernel: ACPI: Waking up from system sleep state S3
Jun 30 15:26:36 usar kernel: ACPI: EC: interrupt unblocked
Jun 30 15:26:36 usar kernel: sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
Jun 30 15:26:36 usar kernel: ACPI: EC: event unblocked
Jun 30 15:26:36 usar kernel: sd 0:0:0:0: [sda] Starting disk

as you can see, the system seems wakes up for some reason, is this something that be fixed?

specifically, this

Jun 30 15:26:36 usar kernel: ACPI: Preparing to enter system sleep state S3
Jun 30 15:26:36 usar kernel: ACPI: EC: event blocked
Jun 30 15:26:36 usar kernel: ACPI: EC: EC stopped
Jun 30 15:26:36 usar kernel: PM: Saving platform NVS memory
Jun 30 15:26:36 usar kernel: Disabling non-boot CPUs ...
Jun 30 15:26:36 usar kernel: smpboot: CPU 1 is now offline
Jun 30 15:26:36 usar kernel: smpboot: CPU 2 is now offline
Jun 30 15:26:36 usar kernel: smpboot: CPU 3 is now offline
Jun 30 15:26:36 usar kernel: ACPI: Low-level resume complete
Jun 30 15:26:36 usar kernel: ACPI: EC: EC started
Jun 30 15:26:36 usar kernel: PM: Restoring platform NVS memory

NB: testing suspend using both lid-close on an x230 and systemctl suspend, lid shows moon light on, then immediately off and systemctl have similar suspend then immediate wake behaviour

Last edited by bayleader (2018-06-30 14:41:05)

seth · 2018-06-30 14:57:06

Do you have a parallel windows installation?

bayleader · 2018-06-30 15:17:51

No

Even weirder, the first time after a reboot, it will suspend normally. I give up, thanks for the help Seth

seth · 2018-06-30 21:09:45

In case you change your mind, check

cat /proc/acpi/wakeup

Toggle events by echo'ing the device code (first column) into the file.

WFV · 2018-07-01 04:32:10

same issue with suspend as OP#5

Jun 30 21:14:09 arch-pelago kernel: smpboot: CPU 7 is now offline
Jun 30 21:14:09 arch-pelago kernel: ACPI: Low-level resume complete

since 4.17.2-1 and persists in 4.17.3-1. /proc/acpi/wakeup has keyboard and mouse and two usb controllers (4 total) set to enable, but they are all S4 - BIOS is set to S3, tried BIOS set to AUTO but same results, soon as monitor goes off and reports "no hdmi signal" the mouse and keyboard light up, screen returns and everything else resumes. If I hit sleep again (Xfce) right away, it goes to sleep.

seth · 2018-07-01 05:50:00

If something wakes from S4 it will also wake from S3.
The BIOS setting switches between S1 and S3 (ie. whether your PSU remains on, S1 sucks far more power); That's not related.

Does the system suspend from the multi-user.target (and "systemctl suspend")?
Does it on a more basic graphical.target (no desktop environment, just an xterm. Maybe openbox)?
Does it work if you take the DM out of the equation an try startx?

loqs · 2018-07-01 16:27:59

Possibly https://git.kernel.org/pub/scm/linux/ke … m-s3.patch

WFV · 2018-07-02 15:06:35

seth wrote:

If something wakes from S4 it will also wake from S3.

thanks I didn't know that

seth wrote:

The BIOS setting switches between S1 and S3 (ie. whether your PSU remains on, S1 sucks far more power); That's not related.

yes I figured the BIOS only has two options, so Auto just picks one of the two from the OS request

seth wrote:

Does the system suspend from the multi-user.target (and "systemctl suspend")?

no, same results

seth wrote:

Does it on a more basic graphical.target (no desktop environment, just an xterm. Maybe openbox)?

it did but need to try this one again after a reboot or from single user mode as sometimes depending how much time elapsed it may or may not work. Correct me if I'm wrong here: I logged out graphical desktop, switched to tty2 and # systemctl stop lxdm, tty1 was then at the systemd version message no gui. then issued systemctl suspend and it suspended however, it was about an hour after the first suspend above failed so i don't believe is valid test, will retest later as mentioned.

seth wrote:

Does it work if you take the DM out of the equation an try startx?

haven't tried this yet - probably few days before i get back to it. Also looks like the bug loqs sent.
Thanks both for the helpful troubleshooting tools

seth · 2018-07-02 15:22:35

See loqs' link - apparently there's a regression in the intel related low power subsystem code. Should then be fixed in 4.18 and not occur in the LTS kernel.

loqs · 2018-07-04 09:59:40

Can you please try linux 4.17.4-1 currently in testing.

WFV · 2018-07-05 19:09:01

It worked in VirtualBox guest but I don't think its valid test there as pretty sure VBox handles suspending a guest differently - and,,, ugh, can't get host pc to boot to DE with 4.17.4-1 - boots to login shell, startx only opens xterm and complains no .zprofile, no .zshenv, no .zshrc, which turns out its not mounting the home drive, so I mount home, but still can't startx - can only get xterm without the zsh errors. 4.18 might be mainline by time i get thru this one, it has been a while since have been here... Pacman log looked normal no pacnew messages or interventions required.
Tried booting to (latest not testing) LTS but it drops to emergency shell and isn't recognizing keyboard... LTS complained about 4.17.4-1 modules not loading before dropping to emergency shell.
Why should it care? isn't it only concerned with LTS kernel modules?
Normally LTS on desktop computer only complains about the vbox modules and boot anyway. ...no suspend today (writing this from a different pc)

Last edited by WFV (2018-07-05 19:11:08)

loqs · 2018-07-05 19:50:18

What does uname -a show the kernel version as when lts complained about 4.17.4-1 modules? When using 4.17-4-1 what is the dmesg or journal output?

WFV · 2018-07-06 02:08:39

I think this diverges from the original suspend post here - probably I should start a new thread?
Probably the weekend before i can post the logs as right now viewing them in Windows there are no line breaks
Yes uname -a shows 4.17.4-1. I'm unable to discern the LTS boot in the journal. Did it not log to journal due to dropping to e-shell?
Thank you.

seth · 2018-07-06 05:22:42

Just upload them or use a decent editor in windows - one that can deal with LF rather than CRLF; and for your entertainment about the most ridiculuous topic in computer history: https://en.wikipedia.org/wiki/Newline
You're not booting the LTS kernel at all, there should be some /boot/vmlinuz-linux-lts - in doubt you forgot to mount the /boot partition before installing it.

WFV · 2018-07-06 06:34:54

thanks seth, got the lf,cr straight, hadn't had to do that in Windows for long time and rarely ever. DE problem was lxdm disabled after update to 4.17.4-1, possibly because of the systemd update 238 to 239? two new hard disks show fsck fail during boot since update (disks are < 2months old), /boot is in / on an SSD but maybe it didn't mount when I tried lts as some of the other hd partitions didn't mount on some reboots, otherwise its always there.
Back to suspend, with 4.17.4-1 no go from the desktop, same result.
dmesg from clean boot and first suspend/resume @ 2234.324154:

[    0.000000] Linux version 4.17.4-1-ARCH (builduser@heftig-469) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Tue Jul 3 15:45:09 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=........-....-....-....-............ rw quiet elevator=cfq amdgpu.dc=0 modprobe.blacklist=btusb,bluetooth
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x207/0x270 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cef5ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cef60000-0x00000000cef77fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cef78000-0x00000000cefbffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cefc0000-0x00000000ceffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000007feffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/M5A88-M, BIOS 1702    05/01/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ff000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF8000000 write-back
[    0.000000]   3 base 0000C8000000 mask FFFFFC000000 write-back
[    0.000000]   4 base 0000CC000000 mask FFFFFE000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 00000007ff000000 aka 32752M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xce000000-0xffffffff] usable ==> reserved
[    0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 15MB of RAM.
[    0.000000] WARNING: CPU: 0 PID: 0 at arch/x86/kernel/cpu/mtrr/cleanup.c:978 mtrr_trim_uncached_memory+0x2cb/0x30b
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.17.4-1-ARCH #1
[    0.000000] Hardware name: System manufacturer System Product Name/M5A88-M, BIOS 1702    05/01/2013
[    0.000000] RIP: 0010:mtrr_trim_uncached_memory+0x2cb/0x30b
[    0.000000] RSP: 0000:ffffffffb3003e30 EFLAGS: 00010046 ORIG_RAX: 0000000000000000
[    0.000000] RAX: 000000000000004b RBX: 000000000000000f RCX: 0000000000000002
[    0.000000] RDX: 0000000000000000 RSI: 0000000000000082 RDI: 00000000ffffffff
[    0.000000] RBP: 0000000000000001 R08: 000000000000005c R09: 000000000000002f
[    0.000000] R10: 0000000000000000 R11: 0000000000000001 R12: 00000000007ff000
[    0.000000] R13: ffffffffb35377e0 R14: 0000000000000008 R15: ffffffffb3535fc0
[    0.000000] FS:  0000000000000000(0000) GS:ffffffffb344e000(0000) knlGS:0000000000000000
[    0.000000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.000000] CR2: ffff88031e00eff8 CR3: 000000031e4de000 CR4: 00000000000406a0
[    0.000000] Call Trace:
[    0.000000]  ? setup_arch+0x526/0xcd8
[    0.000000]  ? printk+0x58/0x6f
[    0.000000]  ? start_kernel+0x69/0x535
[    0.000000]  ? secondary_startup_64+0xa5/0xb0
[    0.000000] Code: f6 ff ff 48 01 c3 48 85 db 0f 84 80 fd ff ff 48 c1 eb 14 48 c7 c7 a0 1e e6 b2 48 89 de e8 0f 85 c5 fe 83 3d 6a c3 0a 00 00 75 02 <0f> 0b 48 c7 c7 09 1c e6 b2 41 bd 01 00 00 00 e8 f2 84 c5 fe e8 
[    0.000000] ---[ end trace b74fe527bc096225 ]---
[    0.000000] update e820 for mtrr
[    0.000000] e820: modified physical RAM map:
[    0.000000] modified: [mem 0x0000000000000000-0x0000000000000fff] reserved
[    0.000000] modified: [mem 0x0000000000001000-0x000000000009abff] usable
[    0.000000] modified: [mem 0x000000000009ac00-0x000000000009ffff] reserved
[    0.000000] modified: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[    0.000000] modified: [mem 0x0000000000100000-0x00000000cdffffff] usable
[    0.000000] modified: [mem 0x00000000ce000000-0x00000000cef5ffff] reserved
[    0.000000] modified: [mem 0x00000000cef60000-0x00000000cef77fff] ACPI data
[    0.000000] modified: [mem 0x00000000cef78000-0x00000000cefbffff] ACPI NVS
[    0.000000] modified: [mem 0x00000000cefc0000-0x00000000ceffffff] reserved
[    0.000000] modified: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] modified: [mem 0x0000000100000000-0x00000007feffffff] usable
[    0.000000] e820: last_pfn = 0x7ff000 max_arch_pfn = 0x400000000
[    0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 94000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x31e660000, 0x31e660fff] PGTABLE
[    0.000000] BRK [0x31e661000, 0x31e661fff] PGTABLE
[    0.000000] BRK [0x31e662000, 0x31e662fff] PGTABLE
[    0.000000] BRK [0x31e663000, 0x31e663fff] PGTABLE
[    0.000000] BRK [0x31e664000, 0x31e664fff] PGTABLE
[    0.000000] BRK [0x31e665000, 0x31e665fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3618c000-0x370bdfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB630 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000CEF60100 000054 (v01 050113 XSDT0946 20130501 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000CEF60290 0000F4 (v03 050113 FACP0946 20130501 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20180313/tbfadt-569)
[    0.000000] ACPI: DSDT 0x00000000CEF60460 00EFCE (v01 A1874  A1874001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000CEF78000 000040
[    0.000000] ACPI: FACS 0x00000000CEF78000 000040
[    0.000000] ACPI: APIC 0x00000000CEF60390 00008C (v01 050113 APIC0946 20130501 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000CEF60420 00003C (v01 050113 OEMMCFG  20130501 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000CEF78040 000072 (v01 050113 OEMB0946 20130501 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CEF6F8B0 000038 (v01 050113 OEMHPET  20130501 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CEF6F8F0 001714 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000007feffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7feffc000-0x7feffffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000007feffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000099fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cdffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000007feffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000007feffffff]
[    0.000000] On node 0 totalpages: 8179609
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3993 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13120 pages used for memmap
[    0.000000]   DMA32 zone: 839680 pages, LIFO batch:31
[    0.000000]   Normal zone: 114624 pages used for memmap
[    0.000000]   Normal zone: 7335936 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 8295 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 24, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xce000000-0xcef5ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcef60000-0xcef77fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcef78000-0xcefbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcefc0000-0xceffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xcf000000-0xff9fffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8051780
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=........-....-....-....-............ rw quiet elevator=cfq amdgpu.dc=0 modprobe.blacklist=btusb,bluetooth
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 32034800K/32718436K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 683636K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 32653 entries in 128 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 4000.054 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a88fbe062, max_idle_ns: 440795238296 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 8003.44 BogoMIPS (lpj=13333513)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.019999] Security Framework initialized
[    0.019999] Yama: becoming mindful.
[    0.030432] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.034774] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.034931] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.035069] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.035278] CPU: Physical Processor ID: 0
[    0.035279] CPU: Processor Core ID: 0
[    0.035280] mce: CPU supports 7 MCE banks
[    0.035285] LVT offset 1 assigned for vector 0xf9
[    0.035289] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.035290] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.035292] Spectre V2 : Mitigation: Full AMD retpoline
[    0.035292] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.035293] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.035294] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.040072] Freeing SMP alternatives memory: 28K
[    0.046666] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.060009] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.060013] ... version:                0
[    0.060014] ... bit width:              48
[    0.060015] ... generic registers:      6
[    0.060015] ... value mask:             0000ffffffffffff
[    0.060016] ... max period:             00007fffffffffff
[    0.060016] ... fixed-purpose events:   0
[    0.060017] ... event mask:             000000000000003f
[    0.063342] Hierarchical SRCU implementation.
[    0.073428] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.076679] smp: Bringing up secondary CPUs ...
[    0.100015] x86: Booting SMP configuration:
[    0.100017] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.262628] smp: Brought up 1 node, 8 CPUs
[    0.262628] smpboot: Max logical packages: 1
[    0.262628] smpboot: Total of 8 processors activated (64026.56 BogoMIPS)
[    0.266669] devtmpfs: initialized
[    0.266721] x86/mm: Memory block size: 128MB
[    0.269104] PM: Registering ACPI NVS region [mem 0xcef78000-0xcefbffff] (294912 bytes)
[    0.269104] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.269104] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.269104] pinctrl core: initialized pinctrl subsystem
[    0.269104] RTC time:  5:45:28, date: 07/06/18
[    0.269104] NET: Registered protocol family 16
[    0.269104] cpuidle: using governor ladder
[    0.270007] cpuidle: using governor menu
[    0.270052] ACPI: bus type PCI registered
[    0.270054] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.270120] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.270122] PCI: not using MMCONFIG
[    0.270123] PCI: Using configuration type 1 for base access
[    0.270124] PCI: Using configuration type 1 for extended access
[    0.270525] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.270526] mtrr: probably your BIOS does not setup all CPUs.
[    0.270526] mtrr: corrected configuration.
[    0.273374] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.273374] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.273435] ACPI: Added _OSI(Module Device)
[    0.273435] ACPI: Added _OSI(Processor Device)
[    0.273436] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.273437] ACPI: Added _OSI(Processor Aggregator Device)
[    0.273438] ACPI: Added _OSI(Linux-Dell-Video)
[    0.288530] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.560821] ACPI: EC: EC started
[    0.560822] ACPI: EC: interrupt blocked
[    0.560904] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.560906] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.560907] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[    0.560907] ACPI: Interpreter enabled
[    0.560928] ACPI: (supports S0 S3 S4 S5)
[    0.560929] ACPI: Using IOAPIC for interrupt routing
[    0.560962] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.563672] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.563686] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.564297] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.573240] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.573245] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.573650] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.574013] PCI host bridge to bus 0000:00
[    0.574015] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.574016] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.574018] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.574019] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.574020] pci_bus 0000:00: root bus resource [mem 0xcf000000-0xdfffffff window]
[    0.574021] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.574023] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.574031] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[    0.574142] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[    0.574159] pci 0000:00:02.0: enabling Extended Tags
[    0.574181] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.574267] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[    0.574283] pci 0000:00:07.0: enabling Extended Tags
[    0.574304] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.574385] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[    0.574402] pci 0000:00:0a.0: enabling Extended Tags
[    0.574423] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.574511] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.574530] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.574537] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.574545] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.574553] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.574560] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.574568] pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
[    0.574677] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.574692] pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
[    0.574817] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.574835] pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
[    0.574903] pci 0000:00:12.2: supports D1 D2
[    0.574904] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.574990] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.575005] pci 0000:00:13.0: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
[    0.575130] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.575148] pci 0000:00:13.2: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff]
[    0.575216] pci 0000:00:13.2: supports D1 D2
[    0.575218] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.575301] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.575435] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.575456] pci 0000:00:14.2: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[    0.575513] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.575590] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.575722] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.575828] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.575843] pci 0000:00:14.5: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
[    0.575967] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.575982] pci 0000:00:16.0: reg 0x10: [mem 0xfe9f3000-0xfe9f3fff]
[    0.576108] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.576125] pci 0000:00:16.2: reg 0x10: [mem 0xfe9ff000-0xfe9ff0ff]
[    0.576194] pci 0000:00:16.2: supports D1 D2
[    0.576195] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.576277] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.576351] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.576423] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.576494] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.576568] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.576639] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.576753] pci 0000:01:00.0: [1002:699f] type 00 class 0x030000
[    0.576778] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.576788] pci 0000:01:00.0: reg 0x18: [mem 0xcfe00000-0xcfffffff 64bit pref]
[    0.576795] pci 0000:01:00.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.576801] pci 0000:01:00.0: reg 0x24: [mem 0xfeac0000-0xfeafffff]
[    0.576808] pci 0000:01:00.0: reg 0x30: [mem 0xfeaa0000-0xfeabffff pref]
[    0.576813] pci 0000:01:00.0: enabling Extended Tags
[    0.576872] pci 0000:01:00.0: supports D1 D2
[    0.576873] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.576942] pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
[    0.576962] pci 0000:01:00.1: reg 0x10: [mem 0xfea9c000-0xfea9ffff 64bit]
[    0.576995] pci 0000:01:00.1: enabling Extended Tags
[    0.577037] pci 0000:01:00.1: supports D1 D2
[    0.577114] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.577117] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.577119] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.577121] pci 0000:00:02.0:   bridge window [mem 0xcfe00000-0xdfffffff 64bit pref]
[    0.577169] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.577192] pci 0000:02:00.0: reg 0x10: [mem 0xfebf0000-0xfebf7fff 64bit]
[    0.577284] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.577351] pci 0000:00:07.0: PCI bridge to [bus 02]
[    0.577354] pci 0000:00:07.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.577405] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.577425] pci 0000:03:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.577444] pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[    0.577456] pci 0000:03:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[    0.577522] pci 0000:03:00.0: supports D1 D2
[    0.577523] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.577603] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.577605] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.577609] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.577670] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.577678] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.577679] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.577680] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.577681] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.577682] pci 0000:00:14.4:   bridge window [mem 0xcf000000-0xdfffffff window] (subtractive decode)
[    0.577683] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.578634] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[    0.578734] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[    0.578838] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[    0.578942] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 9 10 *11 14 15)
[    0.579026] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[    0.579092] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[    0.579159] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[    0.579224] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[    0.580000] ACPI: EC: interrupt unblocked
[    0.580000] ACPI: EC: event unblocked
[    0.580000] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.580000] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.580010] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.580011] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.580012] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.580013] vgaarb: loaded
[    0.580150] pps_core: LinuxPPS API ver. 1 registered
[    0.580151] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.580153] PTP clock support registered
[    0.580160] EDAC MC: Ver: 3.0.0
[    0.580225] PCI: Using ACPI for IRQ routing
[    0.587206] PCI: pci_cache_line_size set to 64 bytes
[    0.587250] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[    0.587251] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[    0.587252] e820: reserve RAM buffer [mem 0x7ff000000-0x7ffffffff]
[    0.587330] NetLabel: Initializing
[    0.587331] NetLabel:  domain hash size = 128
[    0.587331] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.587343] NetLabel:  unlabeled traffic allowed by default
[    0.587350] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.587350] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.590002] clocksource: Switched to clocksource tsc-early
[    0.602359] VFS: Disk quotas dquot_6.6.0
[    0.602375] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.602436] pnp: PnP ACPI init
[    0.602648] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.602715] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.603597] pnp 00:02: [dma 3]
[    0.603874] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.604509] pnp 00:03: [dma 0 disabled]
[    0.604575] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.604742] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.604744] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.604748] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.605079] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.605080] system 00:05: [io  0x040b] has been reserved
[    0.605082] system 00:05: [io  0x04d6] has been reserved
[    0.605083] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.605084] system 00:05: [io  0x0c14] has been reserved
[    0.605086] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.605087] system 00:05: [io  0x0c52] has been reserved
[    0.605088] system 00:05: [io  0x0c6c] has been reserved
[    0.605089] system 00:05: [io  0x0c6f] has been reserved
[    0.605091] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.605092] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.605095] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.605096] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.605097] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.605099] system 00:05: [io  0x0b00-0x0b3f] has been reserved
[    0.605100] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.605101] system 00:05: [io  0x0b00-0x0b1f] has been reserved
[    0.605103] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.605104] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.605105] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.605107] system 00:05: [io  0xfe00-0xfefe] has been reserved
[    0.605109] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.605110] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.605111] system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.605113] system 00:05: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.605116] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.605442] system 00:06: [io  0x0230-0x023f] has been reserved
[    0.605444] system 00:06: [io  0x0290-0x029f] has been reserved
[    0.605445] system 00:06: [io  0x0300-0x030f] has been reserved
[    0.605446] system 00:06: [io  0x0a30-0x0a3f] has been reserved
[    0.605449] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.605545] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.605549] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.605771] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.605773] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.605774] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.605776] system 00:08: [mem 0x00100000-0xceffffff] could not be reserved
[    0.605777] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.605780] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.605903] pnp: PnP ACPI: found 9 devices
[    0.611830] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.611848] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.611850] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.611852] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.611854] pci 0000:00:02.0:   bridge window [mem 0xcfe00000-0xdfffffff 64bit pref]
[    0.611857] pci 0000:00:07.0: PCI bridge to [bus 02]
[    0.611859] pci 0000:00:07.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.611862] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.611864] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.611866] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.611869] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.611879] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.611881] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.611882] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.611883] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.611884] pci_bus 0000:00: resource 8 [mem 0xcf000000-0xdfffffff window]
[    0.611886] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.611887] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.611888] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.611889] pci_bus 0000:01: resource 2 [mem 0xcfe00000-0xdfffffff 64bit pref]
[    0.611890] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.611892] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.611893] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.611894] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.611895] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.611897] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.611898] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.611899] pci_bus 0000:04: resource 8 [mem 0xcf000000-0xdfffffff window]
[    0.611900] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.611965] NET: Registered protocol family 2
[    0.612112] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[    0.612241] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.612805] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.613071] TCP: Hash tables configured (established 262144 bind 65536)
[    0.613136] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    0.613291] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    0.613470] NET: Registered protocol family 1
[    1.477243] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c6 took 843507 usecs
[    1.563898] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c6 took 84431 usecs
[    1.650560] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c6 took 84433 usecs
[    1.737223] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c6 took 84624 usecs
[    1.737431] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.737438] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    1.737665] PCI: CLS 64 bytes, default 64
[    1.737697] Unpacking initramfs...
[    1.925612] Freeing initrd memory: 15560K
[    1.926451] PCI-DMA: Disabling AGP.
[    1.926513] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.926513] PCI-DMA: using GART IOMMU.
[    1.926515] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.930085] amd_uncore: AMD NB counters detected
[    1.930267] LVT offset 0 assigned for vector 0x400
[    1.930328] perf: AMD IBS detected (0x000000ff)
[    1.930376] Scanning for low memory corruption every 60 seconds
[    1.930905] Initialise system trusted keyrings
[    1.930912] Key type blacklist registered
[    1.930959] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    1.932128] zbud: loaded
[    1.932332] pstore: using lz4hc compression
[    1.933459] Key type asymmetric registered
[    1.933460] Asymmetric key parser 'x509' registered
[    1.933484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.933537] io scheduler noop registered
[    1.933537] io scheduler deadline registered
[    1.933598] io scheduler cfq registered (default)
[    1.933599] io scheduler mq-deadline registered
[    1.933599] io scheduler kyber registered
[    1.933605] io scheduler bfq registered
[    1.934220] pcieport 0000:00:02.0: Signaling PME with IRQ 24
[    1.934238] pcieport 0000:00:07.0: Signaling PME with IRQ 25
[    1.934252] pcieport 0000:00:0a.0: Signaling PME with IRQ 26
[    1.934306] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    1.934307] vesafb: scrolling: redraw
[    1.934308] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.934317] vesafb: framebuffer at 0xd0000000, mapped to 0x        (ptrval), using 8128k, total 8128k
[    1.953534] Console: switching to colour frame buffer device 240x67
[    1.972574] fb0: VESA VGA frame buffer device
[    1.972631] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.972638] ACPI: Power Button [PWRB]
[    1.972670] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.972680] ACPI: Power Button [PWRF]
[    1.973614] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.994239] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.995610] ledtrig-cpu: registered to indicate activity on CPUs
[    1.995798] NET: Registered protocol family 10
[    1.998964] Segment Routing with IPv6
[    1.998980] NET: Registered protocol family 17
[    1.999336] RAS: Correctable Errors collector initialized.
[    1.999613] microcode: microcode updated early to new patch_level=0x06000852
[    1.999634] microcode: CPU0: patch_level=0x06000852
[    1.999639] microcode: CPU1: patch_level=0x06000852
[    1.999644] microcode: CPU2: patch_level=0x06000852
[    1.999650] microcode: CPU3: patch_level=0x06000852
[    1.999658] microcode: CPU4: patch_level=0x06000852
[    1.999664] microcode: CPU5: patch_level=0x06000852
[    1.999669] microcode: CPU6: patch_level=0x06000852
[    1.999674] microcode: CPU7: patch_level=0x06000852
[    1.999705] microcode: Microcode Update Driver: v2.2.
[    1.999713] sched_clock: Marking stable (1999701700, 0)->(2289399047, -289697347)
[    1.999977] registered taskstats version 1
[    1.999986] Loading compiled-in X.509 certificates
[    2.000011] zswap: loaded using pool lzo/zbud
[    2.002684] Key type big_key registered
[    2.002919]   Magic number: 10:220:769
[    2.002936] mem kmsg: hash matches
[    2.002985] hctosys: unable to open rtc device (rtc0)
[    2.247309] Freeing unused kernel memory: 1476K
[    2.247311] Write protecting the kernel read-only data: 16384k
[    2.248609] Freeing unused kernel memory: 2016K
[    2.249832] Freeing unused kernel memory: 608K
[    2.264584] Linux agpgart interface v0.103
[    2.306467] [drm] amdgpu kernel modesetting enabled.
[    2.307393] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[    2.307394] fb: switching to amdgpudrmfb from VESA VGA
[    2.307414] Console: switching to colour dummy device 80x25
[    2.307679] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1043:0x0513 0xC7).
[    2.307690] [drm] register mmio base: 0xFEAC0000
[    2.307691] [drm] register mmio size: 262144
[    2.307696] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[    2.307697] [drm] probing mlw for device 1022:9603 = 300d02
[    2.307698] [drm] add ip block number 0 <vi_common>
[    2.307699] [drm] add ip block number 1 <gmc_v8_0>
[    2.307699] [drm] add ip block number 2 <tonga_ih>
[    2.307700] [drm] add ip block number 3 <powerplay>
[    2.307701] [drm] add ip block number 4 <dce_v11_0>
[    2.307701] [drm] add ip block number 5 <gfx_v8_0>
[    2.307702] [drm] add ip block number 6 <sdma_v3_0>
[    2.307702] [drm] add ip block number 7 <uvd_v6_0>
[    2.307703] [drm] add ip block number 8 <vce_v3_0>
[    2.307710] [drm] UVD is enabled in VM mode
[    2.307710] [drm] UVD ENC is enabled in VM mode
[    2.307712] [drm] VCE enabled in VM mode
[    2.307954] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[    2.307958] caller pci_map_rom+0x58/0xe0 mapping multiple BARs
[    2.308761] ATOM BIOS: 115-C994PI0-102
[    2.308962] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    2.309011] amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[    2.309013] amdgpu 0000:01:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[    2.309017] [drm] Detected VRAM RAM=4096M, BAR=256M
[    2.309019] [drm] RAM width 128bits GDDR5
[    2.309076] [TTM] Zone  kernel: Available graphics memory: 16060220 kiB
[    2.309077] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.309078] [TTM] Initializing pool allocator
[    2.309081] [TTM] Initializing DMA pool allocator
[    2.309107] [drm] amdgpu: 4096M of VRAM memory ready
[    2.309109] [drm] amdgpu: 4096M of GTT memory ready.
[    2.309118] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    2.309157] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
[    2.309215] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.309216] [drm] Driver supports precise vblank timestamp query.
[    2.309407] [drm] AMDGPU Display Connectors
[    2.309408] [drm] Connector 0:
[    2.309408] [drm]   DP-1
[    2.309409] [drm]   HPD5
[    2.309410] [drm]   DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[    2.309410] [drm]   Encoders:
[    2.309411] [drm]     DFP1: INTERNAL_UNIPHY1
[    2.309411] [drm] Connector 1:
[    2.309411] [drm]   HDMI-A-1
[    2.309412] [drm]   HPD3
[    2.309413] [drm]   DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[    2.309413] [drm]   Encoders:
[    2.309414] [drm]     DFP2: INTERNAL_UNIPHY1
[    2.309414] [drm] Connector 2:
[    2.309414] [drm]   DVI-D-1
[    2.309415] [drm]   HPD4
[    2.309416] [drm]   DDC: 0x4878 0x4878 0x4879 0x4879 0x487a 0x487a 0x487b 0x487b
[    2.309416] [drm]   Encoders:
[    2.309416] [drm]     DFP3: INTERNAL_UNIPHY
[    2.309475] [drm] Chained IB support enabled!
[    2.311060] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    2.312291] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    2.439869] [drm] UVD and UVD ENC initialized successfully.
[    2.550807] [drm] VCE initialized successfully.
[    2.933415] tsc: Refined TSC clocksource calibration: 4000.002 MHz
[    2.933442] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a85e3b8c7, max_idle_ns: 440795248934 ns
[    2.933523] clocksource: Switched to clocksource tsc
[    3.191063] [drm] fb mappable at 0xD0568000
[    3.191065] [drm] vram apper at 0xD0000000
[    3.191065] [drm] size 8294400
[    3.191066] [drm] fb depth is 24
[    3.191066] [drm]    pitch is 7680
[    3.191129] fbcon: amdgpudrmfb (fb0) is primary device
[    3.323340] Console: switching to colour frame buffer device 240x67
[    3.330305] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[    3.367737] [drm] Initialized amdgpu 3.25.0 20150101 for 0000:01:00.0 on minor 0
[    3.430134] SCSI subsystem initialized
[    3.432521] ACPI: bus type USB registered
[    3.432546] usbcore: registered new interface driver usbfs
[    3.432559] usbcore: registered new interface driver hub
[    3.432608] usbcore: registered new device driver usb
[    3.434201] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.434574] ehci-pci: EHCI PCI platform driver
[    3.434791] QUIRK: Enable AMD PLL fix
[    3.434821] ehci-pci 0000:00:12.2: EHCI Host Controller
[    3.434826] libata version 3.00 loaded.
[    3.434828] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    3.434834] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.434845] ehci-pci 0000:00:12.2: debug port 1
[    3.434890] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
[    3.435090] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.446683] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    3.446731] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    3.446733] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.446734] usb usb1: Product: EHCI Host Controller
[    3.446735] usb usb1: Manufacturer: Linux 4.17.4-1-ARCH ehci_hcd
[    3.446736] usb usb1: SerialNumber: 0000:00:12.2
[    3.446849] hub 1-0:1.0: USB hub found
[    3.446856] hub 1-0:1.0: 5 ports detected
[    3.447038] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.447043] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    3.456635] xhci_hcd 0000:02:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    3.456845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    3.456847] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.456848] usb usb2: Product: xHCI Host Controller
[    3.456849] usb usb2: Manufacturer: Linux 4.17.4-1-ARCH xhci-hcd
[    3.456850] usb usb2: SerialNumber: 0000:02:00.0
[    3.457043] hub 2-0:1.0: USB hub found
[    3.457050] hub 2-0:1.0: 2 ports detected
[    3.457128] ehci-pci 0000:00:13.2: EHCI Host Controller
[    3.457131] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[    3.457133] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.457142] ehci-pci 0000:00:13.2: debug port 1
[    3.457163] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe9ff400
[    3.457182] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.457184] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    3.457187] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    3.457205] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.457225] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    3.457226] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.457227] usb usb4: Product: xHCI Host Controller
[    3.457228] usb usb4: Manufacturer: Linux 4.17.4-1-ARCH xhci-hcd
[    3.457229] usb usb4: SerialNumber: 0000:02:00.0
[    3.457317] hub 4-0:1.0: USB hub found
[    3.457324] hub 4-0:1.0: 2 ports detected
[    3.470084] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    3.470210] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    3.470214] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.470217] usb usb3: Product: EHCI Host Controller
[    3.470220] usb usb3: Manufacturer: Linux 4.17.4-1-ARCH ehci_hcd
[    3.470223] usb usb3: SerialNumber: 0000:00:13.2
[    3.470450] hub 3-0:1.0: USB hub found
[    3.470456] hub 3-0:1.0: 5 ports detected
[    3.470619] ahci 0000:00:11.0: version 3.0
[    3.470815] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    3.470818] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    3.471514] scsi host0: ahci
[    3.471686] scsi host1: ahci
[    3.471789] scsi host2: ahci
[    3.475214] scsi host3: ahci
[    3.475404] scsi host4: ahci
[    3.475490] scsi host5: ahci
[    3.475524] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 19
[    3.475526] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 19
[    3.475527] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 19
[    3.475529] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 19
[    3.475531] ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff00 irq 19
[    3.475532] ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff80 irq 19
[    3.475809] ehci-pci 0000:00:16.2: EHCI Host Controller
[    3.475817] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[    3.475821] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.475830] ehci-pci 0000:00:16.2: debug port 1
[    3.475857] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe9ff000
[    3.486761] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    3.486817] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    3.486818] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.486820] usb usb5: Product: EHCI Host Controller
[    3.486821] usb usb5: Manufacturer: Linux 4.17.4-1-ARCH ehci_hcd
[    3.486822] usb usb5: SerialNumber: 0000:00:16.2
[    3.486921] hub 5-0:1.0: USB hub found
[    3.486927] hub 5-0:1.0: 4 ports detected
[    3.487492] ohci-pci: OHCI PCI platform driver
[    3.487661] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    3.487666] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[    3.487693] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe9fe000
[    3.547505] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[    3.547507] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.547508] usb usb6: Product: OHCI PCI host controller
[    3.547509] usb usb6: Manufacturer: Linux 4.17.4-1-ARCH ohci_hcd
[    3.547510] usb usb6: SerialNumber: 0000:00:12.0
[    3.547669] hub 6-0:1.0: USB hub found
[    3.547676] hub 6-0:1.0: 5 ports detected
[    3.547931] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    3.547936] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[    3.547957] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fd000
[    3.607507] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[    3.607508] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.607509] usb usb7: Product: OHCI PCI host controller
[    3.607510] usb usb7: Manufacturer: Linux 4.17.4-1-ARCH ohci_hcd
[    3.607511] usb usb7: SerialNumber: 0000:00:13.0
[    3.607674] hub 7-0:1.0: USB hub found
[    3.607689] hub 7-0:1.0: 5 ports detected
[    3.607935] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    3.607940] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[    3.607955] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fc000
[    3.667503] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[    3.667505] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.667506] usb usb8: Product: OHCI PCI host controller
[    3.667507] usb usb8: Manufacturer: Linux 4.17.4-1-ARCH ohci_hcd
[    3.667508] usb usb8: SerialNumber: 0000:00:14.5
[    3.667666] hub 8-0:1.0: USB hub found
[    3.667673] hub 8-0:1.0: 2 ports detected
[    3.667900] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    3.667904] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[    3.667920] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe9f3000
[    3.727508] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[    3.727510] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.727511] usb usb9: Product: OHCI PCI host controller
[    3.727512] usb usb9: Manufacturer: Linux 4.17.4-1-ARCH ohci_hcd
[    3.727513] usb usb9: SerialNumber: 0000:00:16.0
[    3.727673] hub 9-0:1.0: USB hub found
[    3.727680] hub 9-0:1.0: 4 ports detected
[    3.816750] usb 5-3: new high-speed USB device number 2 using ehci-pci
[    3.946766] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.946794] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.946820] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.946853] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.946883] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.946910] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.947390] ata4.00: ATA-9: WDC WD2003FZEX-00Z4SA0, 01.01A01, max UDMA/133
[    3.947391] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.947628] ata1.00: ATA-9: SanDisk SDSSDHII120G, X31200RL, max UDMA/133
[    3.947630] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    3.947880] ata4.00: configured for UDMA/133
[    3.949168] ata1.00: configured for UDMA/133
[    3.949267] ata5.00: ATAPI: ATAPI   iHAS224   B, GL0B, max UDMA/100
[    3.949424] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDHII 00RL PQ: 0 ANSI: 5
[    3.949711] ata6.00: ATAPI: ASUS    BW-12B1ST   a, 1.00, max UDMA/100
[    3.950032] ata5.00: configured for UDMA/100
[    3.950049] ata2.00: ATA-10: WDC WD2003FZEX-00SRLA0, 01.01A01, max UDMA/133
[    3.950051] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.950457] ata6.00: configured for UDMA/100
[    3.950706] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    3.950721] sd 0:0:0:0: [sda] Write Protect is off
[    3.950722] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.950745] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.951166]  sda: sda1
[    3.951416] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.957747] ata2.00: configured for UDMA/133
[    3.958048] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2003FZEX-0 1A01 PQ: 0 ANSI: 5
[    3.958250] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.958251] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    3.958262] sd 1:0:0:0: [sdb] Write Protect is off
[    3.958264] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.958283] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.963430] usb 7-1: new low-speed USB device number 2 using ohci-pci
[    3.966527] ata3.00: ATA-9: WDC WD4002FYYZ-01B7CB1, 01.01M03, max UDMA/133
[    3.966532] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.972157] ata3.00: configured for UDMA/133
[    3.972472] scsi 2:0:0:0: Direct-Access     ATA      WDC WD4002FYYZ-0 1M03 PQ: 0 ANSI: 5
[    3.972754] scsi 3:0:0:0: Direct-Access     ATA      WDC WD2003FZEX-0 1A01 PQ: 0 ANSI: 5
[    3.972757] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    3.972774] sd 2:0:0:0: [sdc] Write Protect is off
[    3.972776] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.972803] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.973036] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.973038] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[    3.973053] sd 3:0:0:0: [sdd] Write Protect is off
[    3.973055] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    3.973087] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.974052] usb 5-3: New USB device found, idVendor=05e3, idProduct=0745, bcdDevice= 9.03
[    3.974054] usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[    3.974055] usb 5-3: Product: USB Storage
[    3.974056] usb 5-3: SerialNumber: 000000000903
[    3.975891] usb-storage 5-3:1.0: USB Mass Storage device detected
[    3.975986] scsi host6: usb-storage 5-3:1.0
[    3.976036] usbcore: registered new interface driver usb-storage
[    3.976418] usbcore: registered new interface driver uas
[    3.980186] scsi 4:0:0:0: CD-ROM            ATAPI    iHAS224   B      GL0B PQ: 0 ANSI: 5
[    4.010242]  sdb: sdb1
[    4.010610] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.011932]  sdd: sdd1 sdd2
[    4.012267] sd 3:0:0:0: [sdd] Attached SCSI disk
[    4.019787]  sdc: sdc1 sdc2 sdc3
[    4.020222] sd 2:0:0:0: [sdc] Attached SCSI disk
[    4.025618] scsi 5:0:0:0: CD-ROM            ASUS     BW-12B1ST   a    1.00 PQ: 0 ANSI: 5
[    4.056764] usb 6-1: new full-speed USB device number 2 using ohci-pci
[    4.070083] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.070088] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.070345] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    4.127523] sr 5:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.127684] sr 5:0:0:0: Attached scsi CD-ROM sr1
[    4.140434] random: fast init done
[    4.150432] usb 7-1: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.06
[    4.150434] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.150435] usb 7-1: Product: Dell USB Keyboard
[    4.150436] usb 7-1: Manufacturer: Dell
[    4.154061] hidraw: raw HID events driver (C) Jiri Kosina
[    4.159607] usbcore: registered new interface driver usbhid
[    4.159608] usbhid: USB HID core driver
[    4.160393] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/0003:413C:2003.0001/input/input2
[    4.220074] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.0-1/input0
[    4.258489] usb 6-1: New USB device found, idVendor=0451, idProduct=e001, bcdDevice= 2.08
[    4.258491] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.258492] usb 6-1: Product: TI-GRAPH LINK USB
[    4.258493] usb 6-1: Manufacturer: Texas Instruments
[    4.599228] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.798399] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    4.813844] systemd[1]: Detected architecture x86-64.
[    4.817369] systemd[1]: Set hostname to <arch-bill>.
[    4.836737] usb 6-5: new low-speed USB device number 3 using ohci-pci
[    4.970987] random: systemd: uninitialized urandom read (16 bytes read)
[    4.971232] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.971280] random: systemd: uninitialized urandom read (16 bytes read)
[    4.972851] systemd[1]: Listening on udev Control Socket.
[    4.972861] random: systemd: uninitialized urandom read (16 bytes read)
[    4.972895] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.972905] systemd[1]: Reached target Remote File Systems.
[    4.972914] systemd[1]: Reached target Login Prompts.
[    4.972951] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.972991] systemd[1]: Listening on udev Kernel Socket.
[    4.988273] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[    4.993010] sd 6:0:0:0: [sde] Attached SCSI removable disk
[    5.002752] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.002783] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.002812] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    5.002847] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    5.002881] sr 4:0:0:0: Attached scsi generic sg4 type 5
[    5.002914] sr 5:0:0:0: Attached scsi generic sg5 type 5
[    5.002943] sd 6:0:0:0: Attached scsi generic sg6 type 0
[    5.022406] usb 6-5: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00
[    5.022408] usb 6-5: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    5.022410] usb 6-5: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[    5.022411] usb 6-5: Manufacturer: Microsoft
[    5.024918] random: crng init done
[    5.024920] random: 7 urandom warning(s) missed due to ratelimiting
[    5.025771] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    5.029748] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/0003:045E:0040.0002/input/input3
[    5.029798] hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:12.0-5/input0
[    5.093110] systemd-journald[331]: Received request to flush runtime journal from PID 1
[    5.228714] acpi_cpufreq: overriding BIOS provided _PSD data
[    5.240282] rtc_cmos 00:01: RTC can wake from S4
[    5.240699] rtc_cmos 00:01: registered as rtc0
[    5.240736] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    5.247440] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    5.247448] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[    5.247591] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    5.251188] ATK0110 ATK0110:00: EC enabled
[    5.251325] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.270381] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    5.270538] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    5.270667] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    5.270930] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.271807] parport_pc 00:02: reported by Plug and Play ACPI
[    5.271871] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    5.295889] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    5.296061] mousedev: PS/2 mouse device common for all mice
[    5.303137] cryptd: max_cpu_qlen set to 1000
[    5.308818] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.309518] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x00000000aded0ddf, c8:60:00:60:b7:ed, XID 0c900800 IRQ 36
[    5.309520] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    5.317599] AVX version of gcm_enc/dec engaged.
[    5.317601] AES CTR mode by8 optimization enabled
[    5.338561] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    5.338564] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[    5.364735] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input5
[    5.364802] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
[    5.364856] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
[    5.364908] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[    5.364965] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[    5.369941] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.369944] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.369946] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.369948] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.369949] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[    5.369950] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.369952] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    5.369953] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    5.369955] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    5.394147] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    5.394196] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    5.394262] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    5.394309] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    5.394363] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    5.394420] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[    5.394472] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[    5.394536] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[    5.403381]  sdb: sdb1
[    5.412476]  sdc: sdc1 sdc2 sdc3
[    5.413033] kvm: Nested Virtualization enabled
[    5.413037] kvm: Nested Paging enabled
[    5.416333]  sdd: sdd1 sdd2
[    5.417871] MCE: In-kernel MCE decoding enabled.
[    5.420120] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.420121] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.442794] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    5.452809] ppdev: user-space parallel port driver
[    5.573413] usbcore: registered new device driver usbip-host
[    5.592657] vboxdrv: loading out-of-tree module taints kernel.
[    5.600341] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[    5.602241] vboxdrv: Found 8 processor cores
[    5.602952] pktcdvd: pktcdvd0: writer mapped to sr0
[    5.620169] vboxdrv: TSC mode is Invariant, tentative frequency 4000010034 Hz
[    5.620171] vboxdrv: Successfully loaded version 5.2.14 (interface 0x00290001)
[    5.626447] VBoxPciLinuxInit
[    5.626453] vboxpci: IOMMU not found (not registered)
[    5.627464] VBoxNetAdp: Successfully started.
[    5.629263] VBoxNetFlt: Successfully started.
[    5.636027] pktcdvd: pktcdvd1: writer mapped to sr1
[    5.653782] it87: Found IT8721F chip at 0x290, revision 3
[    5.792523] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: data=ordered
[    6.237013] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    6.374813] r8169 0000:03:00.0 enp3s0: link down
[    6.374813] r8169 0000:03:00.0 enp3s0: link down
[    6.374894] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    9.412192] r8169 0000:03:00.0 enp3s0: link up
[    9.412206] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   16.341470] fuse init (API version 7.26)
[  516.865597] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[ 2144.119600] usb 6-5: USB disconnect, device number 3
[ 2144.119769] usb 7-1: USB disconnect, device number 2
[ 2199.276261] usb 6-5: new low-speed USB device number 4 using ohci-pci
[ 2199.329597] usb 7-1: new low-speed USB device number 3 using ohci-pci
[ 2199.461456] usb 6-5: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00
[ 2199.461461] usb 6-5: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2199.461465] usb 6-5: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2199.461468] usb 6-5: Manufacturer: Microsoft
[ 2199.469173] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/0003:045E:0040.0003/input/input18
[ 2199.469507] hid-generic 0003:045E:0040.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:12.0-5/input0
[ 2199.516289] usb 7-1: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.06
[ 2199.516294] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2199.516297] usb 7-1: Product: Dell USB Keyboard
[ 2199.516299] usb 7-1: Manufacturer: Dell
[ 2199.524752] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/0003:413C:2003.0004/input/input19
[ 2199.579795] hid-generic 0003:413C:2003.0004: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.0-1/input0
[ 2233.256352] PM: suspend entry (deep)
[ 2233.256355] PM: Syncing filesystems ... done.
[ 2233.321484] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 2233.323646] OOM killer disabled.
[ 2233.323647] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2233.324894] Suspending console(s) (use no_console_suspend to debug)
[ 2233.325739] serial 00:03: disabled
[ 2233.326040] parport_pc 00:02: disabled
[ 2233.339794] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 2233.339819] sd 3:0:0:0: [sdd] Synchronizing SCSI cache
[ 2233.339874] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
[ 2233.339875] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2233.339971] sd 3:0:0:0: [sdd] Stopping disk
[ 2233.340068] sd 2:0:0:0: [sdc] Stopping disk
[ 2233.340542] sd 0:0:0:0: [sda] Stopping disk
[ 2233.427143] sd 1:0:0:0: [sdb] Stopping disk
[ 2233.972164] ACPI: EC: interrupt blocked
[ 2233.987262] ACPI: Preparing to enter system sleep state S3
[ 2233.989631] ACPI: EC: event blocked
[ 2233.989632] ACPI: EC: EC stopped
[ 2233.989632] PM: Saving platform NVS memory
[ 2233.989636] Disabling non-boot CPUs ...
[ 2234.042583] smpboot: CPU 1 is now offline
[ 2234.094386] smpboot: CPU 2 is now offline
[ 2234.134351] smpboot: CPU 3 is now offline
[ 2234.174669] smpboot: CPU 4 is now offline
[ 2234.227924] smpboot: CPU 5 is now offline
[ 2234.270855] smpboot: CPU 6 is now offline
[ 2234.324154] smpboot: CPU 7 is now offline
[ 2234.327774] ACPI: Low-level resume complete
[ 2234.327813] ACPI: EC: EC started
[ 2234.327813] PM: Restoring platform NVS memory
[ 2234.327828] PCI-DMA: Resuming GART IOMMU
[ 2234.327829] PCI-DMA: Restoring GART aperture settings
[ 2234.327835] LVT offset 0 assigned for vector 0x400
[ 2234.339739] microcode: CPU0: new patch_level=0x06000852
[ 2234.339786] Enabling non-boot CPUs ...
[ 2234.339824] x86: Booting SMP configuration:
[ 2234.339824] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 2234.342552] TSC synchronization [CPU#0 -> CPU#1]:
[ 2234.342554] Measured 7797595841 cycles TSC warp between CPUs, turning off TSC clock.
[ 2234.342559] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 2234.342593] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 2234.342595] sched_clock: Marking unstable (2234340492531, -277387)<-(2234632289796, -289697347)
[ 2236.292192]  cache: parent cpu1 should not be sleeping
[ 2236.292279] microcode: CPU1: patch_level=0x06000852
[ 2236.290102] CPU1 is up
[ 2236.290119] clocksource: Switched to clocksource hpet
[ 2236.290116] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 2236.290136]  cache: parent cpu2 should not be sleeping
[ 2236.290136] microcode: CPU2: patch_level=0x06000852
[ 2236.290136] CPU2 is up
[ 2236.290136] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 2236.290136]  cache: parent cpu3 should not be sleeping
[ 2236.290136] microcode: CPU3: patch_level=0x06000852
[ 2236.290136] CPU3 is up
[ 2236.290136] smpboot: Booting Node 0 Processor 4 APIC 0x14
[ 2236.290136]  cache: parent cpu4 should not be sleeping
[ 2236.290136] microcode: CPU4: patch_level=0x06000852
[ 2236.290136] CPU4 is up
[ 2236.290136] smpboot: Booting Node 0 Processor 5 APIC 0x15
[ 2236.290136]  cache: parent cpu5 should not be sleeping
[ 2236.290136] microcode: CPU5: patch_level=0x06000852
[ 2236.290136] CPU5 is up
[ 2236.290136] smpboot: Booting Node 0 Processor 6 APIC 0x16
[ 2236.290136]  cache: parent cpu6 should not be sleeping
[ 2236.290136] microcode: CPU6: patch_level=0x06000852
[ 2236.290136] CPU6 is up
[ 2236.290136] smpboot: Booting Node 0 Processor 7 APIC 0x17
[ 2236.290136]  cache: parent cpu7 should not be sleeping
[ 2236.290136] microcode: CPU7: patch_level=0x06000852
[ 2236.290136] CPU7 is up
[ 2236.290136] ACPI: Waking up from system sleep state S3
[ 2236.290136] ACPI: EC: interrupt unblocked
[ 2236.290136] ACPI: EC: event unblocked
[ 2236.290136] usb usb2: root hub lost power or was reset
[ 2236.290136] usb usb4: root hub lost power or was reset
[ 2236.290136] parport_pc 00:02: activated
[ 2236.290136] serial 00:03: activated
[ 2236.290136] sd 0:0:0:0: [sda] Starting disk
[ 2236.290136] sd 1:0:0:0: [sdb] Starting disk
[ 2236.290136] sd 3:0:0:0: [sdd] Starting disk
[ 2236.290136] sd 2:0:0:0: [sdc] Starting disk
[ 2236.290136] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
[ 2236.290136] [drm] UVD and UVD ENC initialized successfully.
[ 2236.290136] [drm] VCE initialized successfully.
[ 2236.290136] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2236.290136] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2236.290136] ata1.00: configured for UDMA/133
[ 2236.290136] ata6.00: configured for UDMA/100
[ 2236.290136] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2236.290136] ata5.00: configured for UDMA/100
[ 2236.290136] OOM killer enabled.
[ 2236.290136] Restarting tasks ... done.
[ 2236.290136] PM: suspend exit
[ 2236.290136] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 2236.290136] r8169 0000:03:00.0 enp3s0: link down
[ 2236.290136] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 2236.290136] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2236.290136] ata4.00: configured for UDMA/133
[ 2237.899612] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2237.910431] ata2.00: configured for UDMA/133
[ 2238.427786] r8169 0000:03:00.0 enp3s0: link up
[ 2238.427798] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 2240.486283] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2240.597194] ata3.00: configured for UDMA/133

EDIT1: the fsck failures during boot are from systemd-fcsk@.service which wasn't running prior to systemd-239, so looking into that also as the failures drop to emergency shell every boot, but Control D works.

EDIT2: there were a couple mistakes I made after upgrading kernel and other packages in testing. When I tested suspend without DE, i forgot to re-enable lxdm so first reboot no DE (duh-huh). The first boot in new kernel didn't mount /home. The systemd-fsck@dev-disk-by errors threw me also as the BIOS POST first showed the home drive with "SMART error", its a new drive, but it can happen. I then tried to boot linux-lts as have both mainline and lts kernels installed - that one dropped to emergency shell with no keyboard. The attempted lts boot that complained about 4.17.4 modules never recorded in the journal, it would be just before the last reboot. Here is that journal log as requested: https://gist.github.com/b1aea02c1df011c … 90e44f779d.
End results, rolled back lvm2 to 2.02.177 and it clears the systemd-fcsk@ errors and boots normal, ran gsmartctl short and extended tests and see no errors on /home (sdb) - haven't rebooted since smart tests so don't know if POST still shows error. Suspend still same results as mentioned.

EDIT3: no change with

4.17.8-1-ARCH #1 SMP PREEMPT Wed Jul 18 09:56:24 UTC 2018 x86_64 GNU/Linux

however, the mounting and fsck problem appears to be resolved with testing lvm2-2.02.180-1

Last edited by WFV (2018-07-19 23:21:46)

Arch Linux

#1 2018-06-30 13:32:12

fail to suspend due to Device 0000:00:19.0, how can I fix this?

#2 2018-06-30 13:47:35

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#3 2018-06-30 13:58:10

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#4 2018-06-30 14:03:23

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#5 2018-06-30 14:30:12

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#6 2018-06-30 14:57:06

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#7 2018-06-30 15:17:51

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#8 2018-06-30 21:09:45

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#9 2018-07-01 04:32:10

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#10 2018-07-01 05:50:00

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#11 2018-07-01 16:27:59

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#12 2018-07-02 15:06:35

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#13 2018-07-02 15:22:35

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#14 2018-07-04 09:59:40

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#15 2018-07-05 19:09:01

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#16 2018-07-05 19:50:18

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#17 2018-07-06 02:08:39

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#18 2018-07-06 05:22:42

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

#19 2018-07-06 06:34:54

Re: fail to suspend due to Device 0000:00:19.0, how can I fix this?

Board footer