Arch Linux

teamde78

Member

Registered: 2018-07-07

Posts: 16

[SOLVED] No Soundcards found

Hello all,

Last night compiled a new dwm install and got everything working including sound. Shut the lid and awoke this morning to no sound. Have been doing a lot of research on the wikis and on the forums but cannot find anything that works. Hoping for some of you to review my outputs on some commands to see if you spot something I am missing.

Output of lsmod | grep snd

# lsmod | grep snd
snd_soc_skl           114688  0
snd_soc_skl_ipc        73728  1 snd_soc_skl
snd_hda_ext_core       28672  1 snd_soc_skl
snd_soc_sst_dsp        36864  1 snd_soc_skl_ipc
snd_soc_sst_ipc        16384  1 snd_soc_skl_ipc
snd_soc_acpi           16384  1 snd_soc_skl
snd_soc_core          290816  1 snd_soc_skl
snd_compress           24576  1 snd_soc_core
ac97_bus               16384  1 snd_soc_core
snd_pcm_dmaengine      16384  1 snd_soc_core
snd_hda_intel          45056  0
snd_hda_codec         151552  1 snd_hda_intel
snd_hda_core           94208  4 snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_soc_skl
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               135168  7 snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_soc_core,snd_soc_skl,snd_hda_core,snd_pcm_dmaengine
snd_timer              36864  1 snd_pcm
snd                    98304  8 snd_hwdep,snd_hda_intel,snd_hda_codec,snd_timer,snd_compress,thinkpad_acpi,snd_soc_core,snd_pcm
soundcore              16384  1 snd

output of aplay-l

aplay: device_list:272: no soundcards found...

when running amixer getting:

Mixer attach default error: No such file or directory

As I said was working fine last night and now nothing - really cannot determine what occured. Let me know if you need anything further.

Last edited by teamde78 (2018-07-07 18:05:48)

Trilby

Inspector Parrot

Registered: 2011-11-29

Posts: 30,470

Website

Re: [SOLVED] No Soundcards found

The only real symptom you've shared is that the card was no longer detected after the "lid close".  Does lid closure result in suspending, hybernating, etc?

Is this repeatable: does rebooting restore the sound, and is lid closure a reliably result in the same problem?

---

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

teamde78

Member

Registered: 2018-07-07

Posts: 16

Re: [SOLVED] No Soundcards found

Hi there - the machine goes into suspend. And rebooting does not solve the issue.

loqs

Member

Registered: 2014-03-06

Posts: 18,950

Re: [SOLVED] No Soundcards found

What is the output of dmesg for a boot where the soundcard is not detected?  What type of device is the soundcard is it enumerated in lspci / lsusb etc?

teamde78

Member

Registered: 2018-07-07

Posts: 16

Re: [SOLVED] No Soundcards found

output of lspci

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:16.3 Serial controller: Intel Corporation Device 9d3d (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
00:1c.2 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #3 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection I219-LM (rev 21)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)
04:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)

output of dmesg

[    6.717897] Copyright(c) 2003- 2015 Intel Corporation
[    6.731436] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b52c)
[    6.739220] uvcvideo: Failed to initialize entity for entity 6
[    6.739221] uvcvideo: Failed to register entites (-22).
[    6.739269] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input9
[    6.739310] usbcore: registered new interface driver uvcvideo
[    6.739311] USB Video Class driver (1.1.1)
[    6.756242] AVX2 version of gcm_enc/dec engaged.
[    6.756243] AES CTR mode by8 optimization enabled
[    6.778455] Bluetooth: Core ver 2.22
[    6.778472] NET: Registered protocol family 31
[    6.778473] Bluetooth: HCI device and connection manager initialized
[    6.778477] Bluetooth: HCI socket layer initialized
[    6.778479] Bluetooth: L2CAP socket layer initialized
[    6.778485] Bluetooth: SCO socket layer initialized
[    6.897278] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.897288] cfg80211: failed to load regulatory.db
[    6.933074] snd_hda_intel: probe of 0000:00:1f.3 failed with error -2
[    7.134733] iwlwifi 0000:04:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm
[    7.169425] usbcore: registered new interface driver btusb
[    7.182790] Bluetooth: hci0: Firmware revision 0.0 build 217 week 17 2018
[    7.236803] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    7.236805] fb: switching to inteldrmfb from VESA VGA
[    7.236819] Console: switching to colour dummy device 80x25
[    7.236884] [drm] Replacing VGA console driver
[    7.237101] i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers
[    7.237102] i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited
[    7.237733] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.237734] [drm] Driver supports precise vblank timestamp query.
[    7.238149] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.246125] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[    7.248231] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.248465] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    7.310630] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    7.337891] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    7.344132] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[    7.376800] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[    7.407318] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[    7.407325] psmouse serio1: synaptics: Your touchpad (PNP: LEN2016 PNP0f13) says it can support a different bus. If i2c-hid and
hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    7.419598] kvm: disabled by bios
[    7.422593] mousedev: PS/2 mouse device common for all mice
[    7.444723] iwlwifi 0000:04:00.0: base HW address: f0:d5:bf:73:9b:e6
[    7.445804] fbcon: inteldrmfb (fb0) is primary device
[    7.462453] snd_soc_skl 0000:00:1f.3: device specific method to extract NHLT blob failed
[    7.467694] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf006a3/0x943300/0x12e800/0x10000, board
id: 3053, fw id: 2010421
[    7.467700] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    7.503311] Adding 4194300k swap on /dev/sda1.  Priority:-2 extents:1 across:4194300k FS
[    7.504753] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[    7.521064] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    7.521313] thermal thermal_zone3: failed to read out thermal zone (-61)
[    7.600180] intel_rapl: Found RAPL domain package
[    7.600184] intel_rapl: Found RAPL domain core
[    7.600187] intel_rapl: Found RAPL domain uncore
[    7.600190] intel_rapl: Found RAPL domain dram
[    7.823219] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[    8.141359] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    8.353218] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
[    8.775648] Console: switching to colour frame buffer device 240x67
[    8.808613] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   29.784725] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   36.074843] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   39.607082] wlp4s0: authenticate with 9c:34:26:87:2d:b2
[   39.622495] wlp4s0: send auth to 9c:34:26:87:2d:b2 (try 1/3)
[   39.629591] wlp4s0: authenticated
[   39.630080] wlp4s0: associate with 9c:34:26:87:2d:b2 (try 1/3)
[   39.632919] wlp4s0: RX AssocResp from 9c:34:26:87:2d:b2 (capab=0x1411 status=0 aid=3)
[   39.636835] wlp4s0: associated
[   39.713617] wlp4s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 9c:34:26:87:2d:b2
[   39.715011] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   39.852630] 8021q: 802.1Q VLAN Support v1.8

teamde78

Member

Registered: 2018-07-07

Posts: 16

Re: [SOLVED] No Soundcards found

Solved - reversed the alsa-firmware and alsa-utils and reinstalled. Working fine now even on suspend.

I think I messed up on a config file when writing the alsa.conf file and had some spacing in there that shouldn't be