Arch Linux

berat703

Member

Registered: 2018-03-25

Posts: 6

Boot hangs when plugged into AC

Hello there,

My computer cannot start normally.If I try to start when charge cable unplugged, I got this error and never it start.

See

-If I try to start when charge cable plugged, successfully started.

-If I try to start when charge cable plugged but low charge, I got -same error and cannot start.

So I can't solve cause no error input.

What can I do for solve the problem?

Last edited by berat703 (2018-07-22 14:29:00)

Trilby

Inspector Parrot

Registered: 2011-11-29

Posts: 30,543

Website

Re: Boot hangs when plugged into AC

First, and most importantly, edit your post and fix the title.  Put something related to the problem in the subject line.  (e.g., "Boot hangs when plugged into AC").

Second, replace that huge image with a link.

Third, have you enstalled and loaded the processor microcode?

Overall, see the forum guidelines.

EDIT: thanks for the prompt attention to the above revisions.  The microcode may be unrelated, but you should ensure that is in place regardless.

Last edited by Trilby (2018-07-22 14:32:59)

---

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

berat703

Member

Registered: 2018-03-25

Posts: 6

Re: Boot hangs when plugged into AC

Thanks for advice.I fixed it.

I didn't install and loaded processor microcode.

First, and most importantly, edit your post and fix the title.  Put something related to the problem in the subject line.  (e.g., "Boot hangs when plugged into AC").

Second, replace that huge image with a link.

Third, have you enstalled and loaded the processor microcode?

Overall, see the forum guidelines.

loqs

Member

Registered: 2014-03-06

Posts: 19,113

Re: Boot hangs when plugged into AC

If you remove the quiet boot option and add loglevel=7 is more output produced?