You are not logged in.
Pages: 1
Hello Forum,
I've been struggling a few days now with my Bluetooth device. I've seen many posts with similar issues, but none of the mentioned ways solved my problems.
What I Have: Elitebook 840 G1 with intel 7260 DualBand card. An old USB-BT adapter I have as comparison worked without any problem. On WIndows integrated BT worked as well. Kernel is uptodate linux-zen
What I did:
Installed bluez-git (due to a hint in another thread after the regular bluez, bluez-utils etc. did'nt work)
modprobed btusb
After each changing step systemctl enable/start bluetooth.service
[bluetooth]# devices
No default controller availablelspci:
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:16.3 Serial controller: Intel Corporation 8 Series HECI KT (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I218-LM (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1c.5 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 6 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)lsusb:
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0424:5534 Standard Microsystems Corp. Hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 138a:003f Validity Sensors, Inc. VFS495 Fingerprint Reader
Bus 002 Device 003: ID 062a:4101 MosArt Semiconductor Corp. Wireless Keyboard/Mouse
Bus 002 Device 002: ID 0424:2134 Standard Microsystems Corp. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubjournalctl -b |gep bluetooth
Jul 27 09:59:03 archlinux kernel: Bluetooth: Core ver 2.22
Jul 27 09:59:03 archlinux kernel: Bluetooth: HCI device and connection manager initialized
Jul 27 09:59:03 archlinux kernel: Bluetooth: HCI socket layer initialized
Jul 27 09:59:03 archlinux kernel: Bluetooth: L2CAP socket layer initialized
Jul 27 09:59:03 archlinux kernel: Bluetooth: SCO socket layer initialized
Jul 27 09:59:13 archlinux systemd[1]: Starting Bluetooth service...
Jul 27 09:59:13 archlinux bluetoothd[469]: Bluetooth daemon 5.50
Jul 27 09:59:13 archlinux systemd[1]: Started Bluetooth service.
Jul 27 09:59:13 archlinux kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jul 27 09:59:13 archlinux kernel: Bluetooth: BNEP filters: protocol multicast
Jul 27 09:59:13 archlinux kernel: Bluetooth: BNEP socket layer initialized
Jul 27 09:59:13 archlinux bluetoothd[469]: Bluetooth management interface 1.14 initializedlsmod | grep blue:
bluetooth 671744 11 btrtl,btintel,btbcm,bnep,btusb
ecdh_generic 28672 1 bluetooth
rfkill 32768 8 hp_wmi,bluetooth,cfg80211
crc16 16384 2 bluetooth,ext4rfkill list:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: nodmesg
[ 0.000000] Linux version 4.17.9-1-zen (builduser@heftig-27352) (gcc version 8.1.1 20180531 (GCC)) #1 ZEN SMP PREEMPT Sun Jul 22 20:23:46 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=b98787ac-9699-42d2-9432-6523a97410eb rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009cb7efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e000000-0x00000000bf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043edfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.44 04/12/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x43ee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
[ 0.000000] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 3 base 009F000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 5 base 0200000000 mask 7E00000000 write-back
[ 0.000000] 6 base 0400000000 mask 7FC0000000 write-back
[ 0.000000] 7 base 043F000000 mask 7FFF000000 uncachable
[ 0.000000] 8 base 043EE00000 mask 7FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x3cf888000, 0x3cf888fff] PGTABLE
[ 0.000000] BRK [0x3cf889000, 0x3cf889fff] PGTABLE
[ 0.000000] BRK [0x3cf88a000, 0x3cf88afff] PGTABLE
[ 0.000000] BRK [0x3cf88b000, 0x3cf88bfff] PGTABLE
[ 0.000000] BRK [0x3cf88c000, 0x3cf88cfff] PGTABLE
[ 0.000000] BRK [0x3cf88d000, 0x3cf88dfff] PGTABLE
[ 0.000000] BRK [0x3cf88e000, 0x3cf88efff] PGTABLE
[ 0.000000] BRK [0x3cf88f000, 0x3cf88ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36da7000-0x376cafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F2FE0 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000009DFFE120 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009DFFC000 00010C (v05 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: DSDT 0x000000009DFD1000 02555B (v02 HPQOEM 198F 00000001 INTL 20110112)
[ 0.000000] ACPI: FACS 0x000000009DDE3000 000040
[ 0.000000] ACPI: FACS 0x000000009DDE3000 000040
[ 0.000000] ACPI: HPET 0x000000009DFFB000 000038 (v01 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x000000009DFFA000 0000BC (v01 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x000000009DFF9000 00003C (v01 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0x000000009DFF7000 000032 (v02 HPQOEM 198F 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 0x000000009DFCE000 000313 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[ 0.000000] ACPI: SLIC 0x000000009DFCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FPDT 0x000000009DFCA000 000044 (v01 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT 0x000000009DFC9000 000038 (v00 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x000000009DFC5000 000466 (v01 Isct IsctAsl 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC4000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC3000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC2000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC1000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
[ 0.000000] ACPI: ASF! 0x000000009DFF8000 0000A5 (v32 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: DMAR 0x000000009DFC0000 0000B0 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043edfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43edfc000-0x43edfffff]
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Using PIT calibration value
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043edfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009cb7efff]
[ 0.000000] node 0: [mem 0x000000009dfff000-0x000000009dffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043edfffff]
[ 0.000000] Reserved but unavailable: 13540 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043edfffff]
[ 0.000000] On node 0 totalpages: 4045084
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9966 pages used for memmap
[ 0.000000] DMA32 zone: 637824 pages, LIFO batch:31
[ 0.000000] Normal zone: 53176 pages used for memmap
[ 0.000000] Normal zone: 3403264 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x9f200000-0xbf1fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cb7f000-0x9de7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9de7f000-0x9df7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9df7f000-0x9dffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0xbf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xbf200000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x531 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3981857
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=b98787ac-9699-42d2-9432-6523a97410eb rw quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 15824280K/16180336K available (12300K kernel code, 1305K rwdata, 3488K rodata, 1468K init, 608K bss, 356056K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 30513 entries in 120 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 20736, nr_irqs: 760, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180313
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] DMAR: Host address width 39
[ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.000000] DMAR: RMRR base: 0x0000009dd18000 end: 0x0000009dd37fff
[ 0.000000] DMAR: RMRR base: 0x0000009f000000 end: 0x000000bf1fffff
[ 0.000000] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.000000] x2apic enabled
[ 0.000000] Switched APIC routing to cluster x2apic.
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.016666] tsc: Fast TSC calibration using PIT
[ 0.019999] tsc: Detected 2494.310 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f43abe78b, max_idle_ns: 440795261829 ns
[ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.47 BogoMIPS (lpj=8314366)
[ 0.019999] pid_max: default: 32768 minimum: 301
[ 0.019999] Security Framework initialized
[ 0.019999] Yama: becoming mindful.
[ 0.025018] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.026396] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.026456] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.026500] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.026772] CPU: Physical Processor ID: 0
[ 0.026773] CPU: Processor Core ID: 0
[ 0.026779] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.026780] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.026785] mce: CPU supports 7 MCE banks
[ 0.026797] CPU0: Thermal monitoring enabled (TM1)
[ 0.026811] process: using mwait in idle threads
[ 0.026814] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.026815] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.026816] Spectre V2 : Mitigation: Full generic retpoline
[ 0.026817] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.026818] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.026818] Speculative Store Bypass: Vulnerable
[ 0.036191] Freeing SMP alternatives memory: 32K
[ 0.037208] TSC deadline timer enabled
[ 0.037211] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.053342] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.053395] ... version: 3
[ 0.053396] ... bit width: 48
[ 0.053397] ... generic registers: 4
[ 0.053398] ... value mask: 0000ffffffffffff
[ 0.053399] ... max period: 00007fffffffffff
[ 0.053399] ... fixed-purpose events: 3
[ 0.053400] ... event mask: 000000070000000f
[ 0.056674] Hierarchical SRCU implementation.
[ 0.067008] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.070011] smp: Bringing up secondary CPUs ...
[ 0.093350] x86: Booting SMP configuration:
[ 0.093351] .... node #0, CPUs: #1 #2 #3
[ 0.140782] smp: Brought up 1 node, 4 CPUs
[ 0.140782] smpboot: Max logical packages: 2
[ 0.140782] smpboot: Total of 4 processors activated (19962.91 BogoMIPS)
[ 0.143775] devtmpfs: initialized
[ 0.143775] x86/mm: Memory block size: 128MB
[ 0.144735] PM: Registering ACPI NVS region [mem 0x9de7f000-0x9df7efff] (1048576 bytes)
[ 0.144735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.144735] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.144735] pinctrl core: initialized pinctrl subsystem
[ 0.144735] RTC time: 7:59:00, date: 07/27/18
[ 0.144735] NET: Registered protocol family 16
[ 0.144735] cpuidle: using governor ladder
[ 0.146675] cpuidle: using governor menu
[ 0.146697] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.146699] ACPI: bus type PCI registered
[ 0.146700] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.146772] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.146779] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.146779] PCI: Using configuration type 1 for base access
[ 0.146781] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.147001] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.147002] mtrr: probably your BIOS does not setup all CPUs.
[ 0.147002] mtrr: corrected configuration.
[ 0.147848] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.147848] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.147848] ACPI: Added _OSI(Module Device)
[ 0.147848] ACPI: Added _OSI(Processor Device)
[ 0.147848] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.147848] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.147848] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.168767] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.176697] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.187003] ACPI: Dynamic OEM Table Load:
[ 0.187003] ACPI: SSDT 0xFFFF90A2AC688800 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
[ 0.187224] ACPI: Dynamic OEM Table Load:
[ 0.187224] ACPI: SSDT 0xFFFF90A2ACADC000 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
[ 0.187906] ACPI: Dynamic OEM Table Load:
[ 0.187906] ACPI: SSDT 0xFFFF90A2AC595200 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
[ 0.190669] ACPI: EC: EC started
[ 0.190670] ACPI: EC: interrupt blocked
[ 1.711198] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 1.711201] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.711203] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 1.711203] ACPI: Interpreter enabled
[ 1.711242] ACPI: (supports S0 S3 S4 S5)
[ 1.711243] ACPI: Using IOAPIC for interrupt routing
[ 1.711274] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.711738] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 1.714465] ACPI: Power Resource [APPR] (off)
[ 1.717793] ACPI: Power Resource [COMP] (on)
[ 1.718199] ACPI: Power Resource [LPP] (on)
[ 1.719913] ACPI: Power Resource [PXP6] (on)
[ 1.843738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.843746] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.847069] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 1.847070] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 1.847991] PCI host bridge to bus 0000:00
[ 1.847994] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 1.847996] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 1.847998] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 1.848000] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
[ 1.848002] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
[ 1.848003] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
[ 1.848005] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[ 1.848007] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.848017] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 1.848202] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 1.848216] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 1.848224] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.848230] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 1.848432] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 1.848445] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit]
[ 1.848647] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 1.848666] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit]
[ 1.848725] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.848876] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 1.848899] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073901f 64bit]
[ 1.848978] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.849125] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
[ 1.849145] pci 0000:00:16.3: reg 0x10: [io 0x30b0-0x30b7]
[ 1.849154] pci 0000:00:16.3: reg 0x14: [mem 0xd073f000-0xd073ffff]
[ 1.849374] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[ 1.849393] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
[ 1.849401] pci 0000:00:19.0: reg 0x14: [mem 0xd073e000-0xd073efff]
[ 1.849409] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 1.849475] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.849627] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 1.849647] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit]
[ 1.849724] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.849875] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 1.849957] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.850190] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 1.850276] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.850502] pci 0000:00:1c.5: [8086:9c1a] type 01 class 0x060400
[ 1.850587] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.850813] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 1.850836] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff]
[ 1.850931] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.851089] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 1.851358] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 1.851375] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
[ 1.851382] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
[ 1.851389] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
[ 1.851396] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
[ 1.851404] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 1.851411] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff]
[ 1.851454] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.851599] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 1.851617] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit]
[ 1.851637] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
[ 1.851842] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.851847] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
[ 1.851926] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 1.851986] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit]
[ 1.852199] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.852340] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 1.852345] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
[ 1.852403] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
[ 1.852433] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff]
[ 1.852583] pci 0000:03:00.0: supports D1 D2
[ 1.852585] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 1.852695] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 1.852700] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
[ 1.854201] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.854283] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.854362] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.854440] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.854517] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.854594] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.854673] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.854750] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.855456] ACPI: EC: interrupt unblocked
[ 1.855466] ACPI: EC: event unblocked
[ 1.855474] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.855476] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.855560] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.855560] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.855560] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.855560] vgaarb: loaded
[ 1.855560] pps_core: LinuxPPS API ver. 1 registered
[ 1.855560] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.855560] PTP clock support registered
[ 1.855560] EDAC MC: Ver: 3.0.0
[ 1.855560] PCI: Using ACPI for IRQ routing
[ 1.861765] PCI: pci_cache_line_size set to 64 bytes
[ 1.861809] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 1.861811] e820: reserve RAM buffer [mem 0x9cb7f000-0x9fffffff]
[ 1.861813] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[ 1.861814] e820: reserve RAM buffer [mem 0x43ee00000-0x43fffffff]
[ 1.861917] NetLabel: Initializing
[ 1.861918] NetLabel: domain hash size = 128
[ 1.861919] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.861935] NetLabel: unlabeled traffic allowed by default
[ 1.861939] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.861939] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.864357] clocksource: Switched to clocksource tsc-early
[ 1.876496] VFS: Disk quotas dquot_6.6.0
[ 1.876519] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.876600] pnp: PnP ACPI init
[ 1.876973] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.876976] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 1.876978] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.876980] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.876982] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.876984] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.876988] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 1.876990] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.876992] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.876994] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
[ 1.877001] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.877237] system 00:01: [io 0x0200-0x027f] has been reserved
[ 1.877240] system 00:01: [io 0xffff] has been reserved
[ 1.877242] system 00:01: [io 0xffff] has been reserved
[ 1.877243] system 00:01: [io 0xffff] has been reserved
[ 1.877245] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 1.877247] system 00:01: [io 0xef80-0xef9f] has been reserved
[ 1.877253] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.877312] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.877567] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 1.877591] pnp 00:04: Plug and Play ACPI device, IDs SYN3003 SYN0100 SYN0002 PNP0f13 (active)
[ 1.878071] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
[ 1.878073] system 00:05: [mem 0x40004000-0x40004fff] could not be reserved
[ 1.878078] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.878524] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 1.878553] pnp: PnP ACPI: found 7 devices
[ 1.884770] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.884795] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 1.884798] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 1.884811] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
[ 1.884815] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.884818] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.884823] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
[ 1.884830] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 1.884835] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
[ 1.884842] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 1.884844] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.884849] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
[ 1.884852] pci 0000:00:1c.5: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
[ 1.884859] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.884861] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.884863] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.884864] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
[ 1.884866] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
[ 1.884868] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
[ 1.884870] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
[ 1.884872] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[ 1.884874] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[ 1.884876] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.884877] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[ 1.884879] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
[ 1.885027] NET: Registered protocol family 2
[ 1.885197] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 1.885267] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.885471] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.885599] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.885647] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.885699] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.885784] NET: Registered protocol family 1
[ 1.885800] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.885808] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 1.886587] PCI: CLS 64 bytes, default 64
[ 1.886626] Unpacking initramfs...
[ 2.046687] Freeing initrd memory: 9360K
[ 2.046724] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.046728] software IO TLB [mem 0x98b7f000-0x9cb7f000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 2.046847] Scanning for low memory corruption every 60 seconds
[ 2.047481] Initialise system trusted keyrings
[ 2.047490] Key type blacklist registered
[ 2.047547] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 2.048910] zbud: loaded
[ 2.049286] pstore: using lz4hc compression
[ 2.050634] Key type asymmetric registered
[ 2.050635] Asymmetric key parser 'x509' registered
[ 2.050675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 2.050713] io scheduler noop registered
[ 2.050714] io scheduler deadline registered
[ 2.050763] io scheduler cfq registered
[ 2.050764] io scheduler mq-deadline registered
[ 2.050765] io scheduler kyber registered
[ 2.050771] io scheduler bfq registered
[ 2.050796] io scheduler bfq-sq registered (default)
[ 2.050798] BFQ I/O-scheduler: v8r12 (with cgroups support)
[ 2.050822] io scheduler bfq-mq registered
[ 2.050823] BFQ I/O-scheduler: v8r12 (with cgroups support)
[ 2.051869] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
[ 2.051889] pcieport 0000:00:1c.3: Signaling PME with IRQ 43
[ 2.051906] pcieport 0000:00:1c.5: Signaling PME with IRQ 44
[ 2.051927] pciehp 0000:00:1c.5:pcie004: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 2.052006] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 2.052007] vesafb: scrolling: redraw
[ 2.052009] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.052023] vesafb: framebuffer at 0xc0000000, mapped to 0x (ptrval), using 5632k, total 5632k
[ 2.202523] Console: switching to colour frame buffer device 200x56
[ 2.352658] fb0: VESA VGA frame buffer device
[ 2.352682] intel_idle: MWAIT substates: 0x11142120
[ 2.352684] intel_idle: v0.4.1 model 0x45
[ 2.352923] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.352995] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 2.353007] ACPI: Sleep Button [SLPB]
[ 2.353049] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.353057] ACPI: Lid Switch [LID]
[ 2.353096] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.353108] ACPI: Power Button [PWRF]
[ 2.377708] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.377709] ACPI: Thermal Zone [CPUZ] (47 C)
[ 2.402220] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.402222] ACPI: Thermal Zone [GFXZ] (0 C)
[ 2.417423] thermal LNXTHERM:02: registered as thermal_zone2
[ 2.417425] ACPI: Thermal Zone [EXTZ] (35 C)
[ 2.432693] thermal LNXTHERM:03: registered as thermal_zone3
[ 2.432695] ACPI: Thermal Zone [LOCZ] (35 C)
[ 2.448016] thermal LNXTHERM:04: registered as thermal_zone4
[ 2.448018] ACPI: Thermal Zone [BATZ] (32 C)
[ 2.448567] thermal LNXTHERM:05: registered as thermal_zone5
[ 2.448569] ACPI: Thermal Zone [PCHZ] (114 C)
[ 2.448810] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.469847] 0000:00:16.3: ttyS0 at I/O 0x30b0 (irq = 19, base_baud = 115200) is a 16550A
[ 2.470829] intel_pstate: Intel P-state driver initializing
[ 2.471140] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.471820] NET: Registered protocol family 10
[ 2.480930] Segment Routing with IPv6
[ 2.480981] NET: Registered protocol family 17
[ 2.481521] RAS: Correctable Errors collector initialized.
[ 2.481601] microcode: sig=0x40651, pf=0x40, revision=0x23
[ 2.481754] microcode: Microcode Update Driver: v2.2.
[ 2.481775] sched_clock: Marking stable (2481742396, 0)->(2466200953, 15541443)
[ 2.482413] registered taskstats version 1
[ 2.482430] Loading compiled-in X.509 certificates
[ 2.482466] zswap: loaded using pool lzo/zbud
[ 2.488655] Key type big_key registered
[ 2.489189] Magic number: 10:219:977
[ 2.489256] hctosys: unable to open rtc device (rtc0)
[ 2.691974] Freeing unused kernel memory: 1468K
[ 2.691977] Write protecting the kernel read-only data: 18432k
[ 2.692977] Freeing unused kernel memory: 2012K
[ 2.694045] Freeing unused kernel memory: 608K
[ 2.694046] CFS CPU scheduler.
[ 2.758377] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.759721] i8042: Detected active multiplexing controller, rev 1.1
[ 2.760419] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.760468] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.760492] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.760523] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.760553] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.766377] ACPI: bus type USB registered
[ 2.766401] usbcore: registered new interface driver usbfs
[ 2.766413] usbcore: registered new interface driver hub
[ 2.766551] usbcore: registered new device driver usb
[ 2.768572] SCSI subsystem initialized
[ 2.769448] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.770139] ehci-pci: EHCI PCI platform driver
[ 2.770625] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.770633] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.770645] ehci-pci 0000:00:1d.0: debug port 2
[ 2.776693] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.776714] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
[ 2.776804] libata version 3.00 loaded.
[ 2.790046] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.790115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 2.790118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.790121] usb usb1: Product: EHCI Host Controller
[ 2.790123] usb usb1: Manufacturer: Linux 4.17.9-1-zen ehci_hcd
[ 2.790125] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.790370] hub 1-0:1.0: USB hub found
[ 2.790379] hub 1-0:1.0: 3 ports detected
[ 2.790892] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.790899] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.791953] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 2.791958] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.792083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 2.792084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.792086] usb usb2: Product: xHCI Host Controller
[ 2.792087] usb usb2: Manufacturer: Linux 4.17.9-1-zen xhci-hcd
[ 2.792088] usb usb2: SerialNumber: 0000:00:14.0
[ 2.792187] hub 2-0:1.0: USB hub found
[ 2.792197] hub 2-0:1.0: 9 ports detected
[ 2.793307] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.793310] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.793313] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.793365] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[ 2.793367] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.793368] usb usb3: Product: xHCI Host Controller
[ 2.793369] usb usb3: Manufacturer: Linux 4.17.9-1-zen xhci-hcd
[ 2.793370] usb usb3: SerialNumber: 0000:00:14.0
[ 2.793496] hub 3-0:1.0: USB hub found
[ 2.793504] hub 3-0:1.0: 4 ports detected
[ 2.793927] usb: port power management may be unreliable
[ 2.794147] ahci 0000:00:1f.2: version 3.0
[ 2.804508] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[ 2.804513] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 2.805011] scsi host0: ahci
[ 2.805184] scsi host1: ahci
[ 2.805240] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 47
[ 2.805241] ata2: DUMMY
[ 2.806048] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.063964] tsc: Refined TSC clocksource calibration: 2494.225 MHz
[ 3.063980] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ea95b09, max_idle_ns: 440795287034 ns
[ 3.064008] clocksource: Switched to clocksource tsc
[ 3.117669] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.119707] ata1.00: supports DRM functions and may not be fully accessible
[ 3.120087] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 3.120104] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.120609] ata1.00: disabling queued TRIM support
[ 3.120615] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT03B6Q, max UDMA/133
[ 3.120619] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.123537] ata1.00: supports DRM functions and may not be fully accessible
[ 3.124522] ata1.00: disabling queued TRIM support
[ 3.126552] ata1.00: configured for UDMA/133
[ 3.136705] ahci 0000:00:1f.2: port does not support device sleep
[ 3.137234] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 3B6Q PQ: 0 ANSI: 5
[ 3.143297] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.143314] sd 0:0:0:0: [sda] Write Protect is off
[ 3.143316] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.143352] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.143844] sda: sda1
[ 3.144377] sd 0:0:0:0: [sda] supports TCG Opal
[ 3.144379] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.232978] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.242613] random: fast init done
[ 3.260427] usb 2-3: New USB device found, idVendor=0424, idProduct=2134, bcdDevice=50.00
[ 3.260432] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.260436] usb 2-3: Product: USB2134B
[ 3.260439] usb 2-3: Manufacturer: SMSC
[ 3.260988] hub 2-3:1.0: USB hub found
[ 3.261006] hub 2-3:1.0: 4 ports detected
[ 3.267003] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[ 3.267006] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.267162] hub 1-1:1.0: USB hub found
[ 3.267282] hub 1-1:1.0: 8 ports detected
[ 3.315131] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 3.330275] systemd[1]: Detected architecture x86-64.
[ 3.333835] systemd[1]: Set hostname to <archlinux>.
[ 3.383377] usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.400366] usb 3-3: New USB device found, idVendor=0424, idProduct=5534, bcdDevice=50.00
[ 3.400369] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 3.400371] usb 3-3: Product: USB5534B
[ 3.400372] usb 3-3: Manufacturer: SMSC
[ 3.401138] hub 3-3:1.0: USB hub found
[ 3.401310] hub 3-3:1.0: 4 ports detected
[ 3.443903] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.444026] systemd[1]: Listening on Journal Socket.
[ 3.444088] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.445057] systemd[1]: Created slice User and Session Slice.
[ 3.445067] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.445132] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.447899] systemd[1]: Listening on Process Core Dump Socket.
[ 3.447947] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.448671] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.448894] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.472582] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 3.523365] usb 2-4: new full-speed USB device number 3 using xhci_hcd
[ 3.525653] systemd-journald[221]: Received request to flush runtime journal from PID 1
[ 3.543526] Bluetooth: Core ver 2.22
[ 3.543550] NET: Registered protocol family 31
[ 3.543551] Bluetooth: HCI device and connection manager initialized
[ 3.543555] Bluetooth: HCI socket layer initialized
[ 3.543557] Bluetooth: L2CAP socket layer initialized
[ 3.543564] Bluetooth: SCO socket layer initialized
[ 3.553097] usbcore: registered new interface driver btusb
[ 3.651805] hp_accel: hardware type HPB64xx found
[ 3.661353] rtc_cmos 00:02: RTC can wake from S4
[ 3.662209] rtc_cmos 00:02: registered as rtc0
[ 3.662237] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.665822] usb 2-4: New USB device found, idVendor=062a, idProduct=4101, bcdDevice=81.13
[ 3.665825] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.665827] usb 2-4: Product: 2.4G Keyboard Mouse
[ 3.665829] usb 2-4: Manufacturer: MOSART Semi.
[ 3.674346] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
[ 3.680422] Adding 4194300k swap on /swapfile. Priority:-2 extents:9 across:4505596k SSFS
[ 3.706345] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.706346] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.706900] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.760142] Linux agpgart interface v0.103
[ 3.780031] lis3lv02d: 8 bits 3DC sensor found
[ 3.790029] usb 2-5: new full-speed USB device number 4 using xhci_hcd
[ 3.913084] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 3.934506] usb 2-5: New USB device found, idVendor=138a, idProduct=003f, bcdDevice= 1.04
[ 3.934509] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 3.934510] usb 2-5: SerialNumber: 0020feae1c96
[ 3.987995] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:65:f3:bd:6a:8d
[ 3.988003] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.988038] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 3.988078] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.990711] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 3.990741] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.015813] checking generic (c0000000 580000) vs hw (c0000000 10000000)
[ 4.015815] fb: switching to inteldrmfb from VESA VGA
[ 4.015856] Console: switching to colour dummy device 80x25
[ 4.016300] [drm] Replacing VGA console driver
[ 4.017542] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.017543] [drm] Driver supports precise vblank timestamp query.
[ 4.017974] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.023791] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[ 4.023794] snd_hda_codec_idt hdaudioC1D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 4.023797] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 4.023799] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0
[ 4.023800] snd_hda_codec_idt hdaudioC1D0: inputs:
[ 4.023802] snd_hda_codec_idt hdaudioC1D0: Mic=0xc
[ 4.023805] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11
[ 4.023806] snd_hda_codec_idt hdaudioC1D0: Line=0xf
[ 4.047534] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[ 4.068079] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 4.068082] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.068083] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.068084] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.068085] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 4.070262] ACPI: AC Adapter [AC] (off-line)
[ 4.078463] input: HP Wireless hotkeys as /devices/virtual/input/input15
[ 4.078890] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 4.080732] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 4.080932] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 4.080989] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 4.081047] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 4.089296] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.093206] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.093242] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 4.093244] cfg80211: failed to load regulatory.db
[ 4.130663] Intel(R) Wireless WiFi driver for Linux
[ 4.130665] Copyright(c) 2003- 2015 Intel Corporation
[ 4.134531] iwlwifi 0000:02:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
[ 4.216099] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.228593] usbcore: registered new interface driver usbhid
[ 4.228595] usbhid: USB HID core driver
[ 4.246042] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 4.247341] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 4.248580] iTCO_vendor_support: vendor-support=0
[ 4.249703] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.249754] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 4.249862] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.253011] hp_wmi: query 0xd returned error 0x5
[ 4.253071] input: HP WMI hotkeys as /devices/virtual/input/input16
[ 4.264340] intel-spi intel-spi: w25q128 (16384 Kbytes)
[ 4.268854] iwlwifi 0000:02:00.0: base HW address: d8:fc:93:3b:8b:52
[ 4.275129] Creating 1 MTD partitions on "intel-spi":
[ 4.275134] 0x000000000000-0x000001000000 : "BIOS"
[ 4.278863] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 4.306969] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:062A:4101.0001/input/input17
[ 4.363523] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-4/input0
[ 4.363796] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/0003:062A:4101.0002/input/input18
[ 4.385385] ACPI: Battery Slot [BAT0] (battery present)
[ 4.385506] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.420158] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-4/input1
[ 4.426922] mousedev: PS/2 mouse device common for all mice
[ 4.490163] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 4.495499] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.513606] iwlwifi 0000:02:00.0 wlo1: renamed from wlan0
[ 4.534701] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 4.776467] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 4.947875] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10
[ 5.036517] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5.111080] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5.220181] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input20
[ 5.224372] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.225076] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
[ 5.225354] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.225447] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than Reserved [mem 0xfed10000-0xfed13fff]
[ 5.225465] caller snb_uncore_imc_init_box+0x6c/0xb0 [intel_uncore] mapping multiple BARs
[ 5.229202] fbcon: inteldrmfb (fb0) is primary device
[ 5.249403] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 5.249467] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 5.249525] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[ 5.249580] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[ 5.251648] cryptd: max_cpu_qlen set to 1000
[ 5.262519] AVX2 version of gcm_enc/dec engaged.
[ 5.262520] AES CTR mode by8 optimization enabled
[ 5.355183] intel_rapl: Found RAPL domain package
[ 5.355184] intel_rapl: Found RAPL domain core
[ 5.355185] intel_rapl: Found RAPL domain uncore
[ 5.355187] intel_rapl: Found RAPL domain dram
[ 5.738680] psmouse serio3: synaptics: queried max coordinates: x [..5668], y [..4762]
[ 5.773111] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1160..]
[ 5.773129] psmouse serio3: synaptics: Your touchpad (PNP: SYN3003 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 5.832893] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2768, fw id: 1658220
[ 5.870822] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input19
[ 6.368908] Console: switching to colour frame buffer device 200x56
[ 6.393700] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.074406] random: crng init done
[ 10.074414] random: 7 urandom warning(s) missed due to ratelimiting
[ 13.172860] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 13.853464] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.853467] Bluetooth: BNEP filters: protocol multicast
[ 13.853473] Bluetooth: BNEP socket layer initialized
[ 14.122630] fuse init (API version 7.26)
[ 16.234873] wlo1: authenticate with 02:a0:57:35:53:13
[ 16.244053] wlo1: send auth to 02:a0:57:35:53:13 (try 1/3)
[ 16.246504] wlo1: authenticated
[ 16.250026] wlo1: associate with 02:a0:57:35:53:13 (try 1/3)
[ 16.250907] wlo1: RX AssocResp from 02:a0:57:35:53:13 (capab=0x11 status=0 aid=9)
[ 16.252683] wlo1: associated
[ 16.408829] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes readyHope that you guys can help me with this!
Offline
Pages: 1