You are not logged in.
Hi forum,
I'm trying to set this package up, but it seems that is not available.
-> Download di binutils-2.30.tar.xz in corso...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:01:31 --:--:-- 0^C
==> ERROR: Aborted by user! Exiting...
It's evident that after 90 seconds didn't start anything. I've already tried three time today, with same conditions.
do it good first, it will be faster than do it twice the saint
Offline
ftp.gnu.org doesn't seem to be responding, so download it from a mirror instead.
https://ftpmirror.gnu.org/binutils
Side note: Cross-compiling is a black art to me, but binutils is now at 2.31.1, so that package should probably be flagged OOD.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
I got it working. But there are strange stages/conflicts to have that installed. I'll write to the maintainer.
Well the black art is necessary to overcome the load that it will take with an ARM MCU. Perhaps, there could be some risks which might mislead the compilation and/or results.
I think I should look for distcc.
do it good first, it will be faster than do it twice the saint
Offline