You are not logged in.
- Topics: Active | Unanswered
#1 2018-08-21 06:20:44
- capitan
- Member
- From: /var/
- Registered: 2017-11-09
- Posts: 9
Libinput Driver - Touchpad Right Click Not Working Anymore
Hello,
Today i realized that my touchpad right click doesn't work anymore. I used libinput driver, i've tried some tips that i found on the internet but still no result, and also from this thread didn't solve my issue.
Here is some log that i have:
== dmesg ==
[ 0.000000] microcode: microcode updated early to revision 0x8e, date = 2018-03-24
[ 0.000000] Linux version 4.18.3-arch1-1-ARCH (builduser@heftig-24267) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Sat Aug 18 09:22:54 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/archy_vg-root rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000091c2ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000091c30000-0x0000000091c30fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000091c31000-0x0000000091c31fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000091c32000-0x000000009988afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009988b000-0x000000009a5b7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009a5b8000-0x000000009a5fafff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009a5fb000-0x000000009adb6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009adb7000-0x000000009b1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009b200000-0x000000009b27efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009b27f000-0x000000009b2fefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b2ff000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ESRT=0x9b173e58 ACPI=0x9a5c5000 ACPI 2.0=0x9a5c5000 SMBIOS=0x9b16f000 SMBIOS 3.0=0x9b16e000
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX330CAK/UX330CAK, BIOS UX330CAK.303 02/16/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x15f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 009C000000 mask 7FFC000000 uncachable
[ 0.000000] 3 base 009B800000 mask 7FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] last_pfn = 0x9b2ff max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x000000009b173e58 to 0x000000009b173e90.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x29c76000, 0x29c76fff] PGTABLE
[ 0.000000] BRK [0x29c77000, 0x29c77fff] PGTABLE
[ 0.000000] BRK [0x29c78000, 0x29c78fff] PGTABLE
[ 0.000000] BRK [0x29c79000, 0x29c79fff] PGTABLE
[ 0.000000] BRK [0x29c7a000, 0x29c7afff] PGTABLE
[ 0.000000] BRK [0x29c7b000, 0x29c7bfff] PGTABLE
[ 0.000000] BRK [0x29c7c000, 0x29c7cfff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x36183000-0x370b8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009A5C5000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x000000009A5C50B0 0000DC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009A5EEFE8 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000009A5C5218 029DCE (v02 _ASUS_ Notebook 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000009AD9DC40 000040
[ 0.000000] ACPI: APIC 0x000000009A5EF100 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009A5EF188 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000009A5EF1D0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x000000009A5EF298 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: FIDT 0x000000009A5EF2D8 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000009A5EF378 0059DE (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: MSDM 0x000000009A5F4D58 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: SSDT 0x000000009A5F4DB0 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000009A5F7F08 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000009A5F7F40 000CF6 (v02 INTEL xh_rvp03 00000000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x000000009A5F8C38 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x000000009A5F8C80 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000009A5F9B60 0003E3 (v02 PmRef Cpu0Tst 00003000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000009A5F9F48 000471 (v02 PmRef ApTst 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000009A5FA3C0 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x000000009A5FA458 000028 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000009A5FA480 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000009A5FA720 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000009A5FA758 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DMAR 0x000000009A5FA7B0 000138 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.000000] ACPI: TPM2 0x000000009A5FA8E8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.000000] ACPI: BGRT 0x000000009A5FA920 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x15effa000-0x15effdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000015effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000091c2ffff]
[ 0.000000] node 0: [mem 0x0000000091c32000-0x000000009988afff]
[ 0.000000] node 0: [mem 0x000000009b27f000-0x000000009b2fefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000015effffff]
[ 0.000000] Reserved but unavailable: 26459 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000015effffff]
[ 0.000000] On node 0 totalpages: 1018021
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9765 pages used for memmap
[ 0.000000] DMA32 zone: 624905 pages, LIFO batch:31
[ 0.000000] Normal zone: 6080 pages used for memmap
[ 0.000000] Normal zone: 389120 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x9c000000-0x9fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x91c30000-0x91c30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x91c31000-0x91c31fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9988b000-0x9a5b7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a5b8000-0x9a5fafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a5fb000-0x9adb6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9adb7000-0x9b1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b200000-0x9b27efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b2ff000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1002089
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/archy_vg-root rw quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3756300K/4072084K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1488K init, 612K bss, 315784K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 33392 entries in 131 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.003333] APIC: Switch to symmetric I/O mode setup
[ 0.003333] DMAR: Host address width 39
[ 0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.003333] DMAR: RMRR base: 0x00000099d48000 end: 0x00000099d67fff
[ 0.003333] DMAR: RMRR base: 0x0000009b800000 end: 0x0000009fffffff
[ 0.003333] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.003333] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.003333] DMAR: ANDD device: 7 name: \_SB.PCI0.SPI0
[ 0.003333] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
[ 0.003333] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.003333] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.003333] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.003333] x2apic enabled
[ 0.003333] Switched APIC routing to cluster x2apic.
[ 0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.023333] tsc: Detected 1600.000 MHz processor
[ 0.023333] tsc: Detected 1608.000 MHz TSC
[ 0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x172daa3a18b, max_idle_ns: 440795212390 ns
[ 0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3217.00 BogoMIPS (lpj=5360000)
[ 0.023333] pid_max: default: 32768 minimum: 301
[ 0.023333] Security Framework initialized
[ 0.023333] Yama: becoming mindful.
[ 0.023333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.023333] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023333] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023333] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.023333] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.023333] mce: CPU supports 8 MCE banks
[ 0.023333] CPU0: Thermal monitoring enabled (TM1)
[ 0.023333] process: using mwait in idle threads
[ 0.023333] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.023333] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.023333] Spectre V2 : Mitigation: Full generic retpoline
[ 0.023333] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.023333] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.023333] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.023333] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.023333] Freeing SMP alternatives memory: 28K
[ 0.035786] TSC deadline timer enabled
[ 0.035796] smpboot: CPU0: Intel(R) Core(TM) m3-7Y30 CPU @ 1.00GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.053390] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.053453] ... version: 4
[ 0.053454] ... bit width: 48
[ 0.053455] ... generic registers: 4
[ 0.053457] ... value mask: 0000ffffffffffff
[ 0.053458] ... max period: 00007fffffffffff
[ 0.053459] ... fixed-purpose events: 3
[ 0.053460] ... event mask: 000000070000000f
[ 0.060016] Hierarchical SRCU implementation.
[ 0.080285] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.086681] smp: Bringing up secondary CPUs ...
[ 0.126730] x86: Booting SMP configuration:
[ 0.126732] .... node #0, CPUs: #1 #2 #3
[ 0.211030] smp: Brought up 1 node, 4 CPUs
[ 0.211030] smpboot: Max logical packages: 1
[ 0.211030] smpboot: Total of 4 processors activated (12869.00 BogoMIPS)
[ 0.213651] devtmpfs: initialized
[ 0.213651] x86/mm: Memory block size: 128MB
[ 0.214246] PM: Registering ACPI NVS region [mem 0x91c30000-0x91c30fff] (4096 bytes)
[ 0.214246] PM: Registering ACPI NVS region [mem 0x9a5fb000-0x9adb6fff] (8110080 bytes)
[ 0.214246] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.214246] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.214246] pinctrl core: initialized pinctrl subsystem
[ 0.214246] RTC time: 5:50:21, date: 08/21/18
[ 0.214246] NET: Registered protocol family 16
[ 0.214246] audit: initializing netlink subsys (disabled)
[ 0.214246] audit: type=2000 audit(1534830620.213:1): state=initialized audit_enabled=0 res=1
[ 0.216723] cpuidle: using governor ladder
[ 0.216723] cpuidle: using governor menu
[ 0.216723] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.216723] ACPI: bus type PCI registered
[ 0.216723] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.216857] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.216862] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.216880] PCI: Using configuration type 1 for base access
[ 0.218419] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.218419] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.218419] ACPI: Added _OSI(Module Device)
[ 0.218419] ACPI: Added _OSI(Processor Device)
[ 0.218419] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.218419] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218419] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.218419] ACPI: EC: EC started
[ 0.218419] ACPI: EC: interrupt blocked
[ 0.218419] ACPI: \: Used as first EC
[ 0.218419] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.218419] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.316526] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20180531/dswload2-316)
[ 0.316547] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221)
[ 0.320654] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.339198] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.350350] ACPI: Dynamic OEM Table Load:
[ 0.350362] ACPI: SSDT 0xFFFFA10B191A5800 000507 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.351616] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.355397] ACPI: Dynamic OEM Table Load:
[ 0.355407] ACPI: SSDT 0xFFFFA10B19269000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.356579] ACPI: Dynamic OEM Table Load:
[ 0.356587] ACPI: SSDT 0xFFFFA10B1934DE00 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.357419] ACPI: Dynamic OEM Table Load:
[ 0.357427] ACPI: SSDT 0xFFFFA10B1934CC00 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
[ 0.359127] ACPI: Dynamic OEM Table Load:
[ 0.359139] ACPI: SSDT 0xFFFFA10B191A4000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.360979] ACPI: Dynamic OEM Table Load:
[ 0.360988] ACPI: SSDT 0xFFFFA10B1934C000 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.362067] ACPI: Dynamic OEM Table Load:
[ 0.362075] ACPI: SSDT 0xFFFFA10B1934D800 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.367261] ACPI: Interpreter enabled
[ 0.367352] ACPI: (supports S0 S3 S4 S5)
[ 0.367354] ACPI: Using IOAPIC for interrupt routing
[ 0.367441] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.370124] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.380971] ACPI: Power Resource [WRST] (on)
[ 0.381412] ACPI: Power Resource [WRST] (on)
[ 0.381854] ACPI: Power Resource [WRST] (on)
[ 0.382298] ACPI: Power Resource [WRST] (on)
[ 0.382731] ACPI: Power Resource [WRST] (on)
[ 0.383181] ACPI: Power Resource [WRST] (on)
[ 0.383627] ACPI: Power Resource [WRST] (on)
[ 0.384059] ACPI: Power Resource [WRST] (on)
[ 0.385096] ACPI: Power Resource [WRST] (on)
[ 0.385529] ACPI: Power Resource [WRST] (on)
[ 0.385962] ACPI: Power Resource [WRST] (on)
[ 0.386397] ACPI: Power Resource [WRST] (on)
[ 0.386843] ACPI: Power Resource [WRST] (on)
[ 0.387286] ACPI: Power Resource [WRST] (on)
[ 0.387718] ACPI: Power Resource [WRST] (on)
[ 0.388151] ACPI: Power Resource [WRST] (on)
[ 0.388593] ACPI: Power Resource [WRST] (on)
[ 0.389627] ACPI: Power Resource [WRST] (on)
[ 0.390066] ACPI: Power Resource [WRST] (on)
[ 0.390503] ACPI: Power Resource [WRST] (on)
[ 0.427458] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.427471] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.431622] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.431625] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.433580] PCI host bridge to bus 0000:00
[ 0.433586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.433588] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.433592] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.433594] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.433597] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.433600] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.433603] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.433605] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.433608] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.433611] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.433613] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.433616] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.433619] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.433621] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.433624] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.433627] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.433630] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xefffffff window]
[ 0.433633] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.433636] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.433657] pci 0000:00:00.0: [8086:590c] type 00 class 0x060000
[ 0.434611] pci 0000:00:02.0: [8086:591e] type 00 class 0x030000
[ 0.434637] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit]
[ 0.434650] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.434660] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.434693] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.435067] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.435093] pci 0000:00:04.0: reg 0x10: [mem 0xef120000-0xef127fff 64bit]
[ 0.435601] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.435644] pci 0000:00:14.0: reg 0x10: [mem 0xef110000-0xef11ffff 64bit]
[ 0.435765] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.436354] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.436393] pci 0000:00:14.2: reg 0x10: [mem 0xef13a000-0xef13afff 64bit]
[ 0.436891] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.437159] pci 0000:00:15.0: reg 0x10: [mem 0xef139000-0xef139fff 64bit]
[ 0.438454] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.438723] pci 0000:00:15.1: reg 0x10: [mem 0xef138000-0xef138fff 64bit]
[ 0.439960] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.440022] pci 0000:00:16.0: reg 0x10: [mem 0xef137000-0xef137fff 64bit]
[ 0.440186] pci 0000:00:16.0: PME# supported from D3hot
[ 0.440612] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.440646] pci 0000:00:17.0: reg 0x10: [mem 0xef130000-0xef131fff]
[ 0.440663] pci 0000:00:17.0: reg 0x14: [mem 0xef136000-0xef1360ff]
[ 0.440676] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.440688] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.440701] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.440714] pci 0000:00:17.0: reg 0x24: [mem 0xef135000-0xef1357ff]
[ 0.440789] pci 0000:00:17.0: PME# supported from D3hot
[ 0.441208] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.441346] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.441845] pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
[ 0.441994] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.442590] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000
[ 0.442859] pci 0000:00:1e.0: reg 0x10: [mem 0xef134000-0xef134fff 64bit]
[ 0.444156] pci 0000:00:1e.2: [8086:9d29] type 00 class 0x118000
[ 0.444425] pci 0000:00:1e.2: reg 0x10: [mem 0xef133000-0xef133fff 64bit]
[ 0.445659] pci 0000:00:1f.0: [8086:9d56] type 00 class 0x060100
[ 0.446192] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.446218] pci 0000:00:1f.2: reg 0x10: [mem 0xef12c000-0xef12ffff]
[ 0.446664] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.446710] pci 0000:00:1f.3: reg 0x10: [mem 0xef128000-0xef12bfff 64bit]
[ 0.446751] pci 0000:00:1f.3: reg 0x20: [mem 0xef100000-0xef10ffff 64bit]
[ 0.446830] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.447396] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.447464] pci 0000:00:1f.4: reg 0x10: [mem 0xef132000-0xef1320ff 64bit]
[ 0.447541] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.448136] acpiphp: Slot [1] registered
[ 0.448153] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.448741] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[ 0.448897] pci 0000:02:00.0: reg 0x10: [mem 0xef000000-0xef001fff 64bit]
[ 0.449487] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.450715] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.450724] pci 0000:00:1c.3: bridge window [mem 0xef000000-0xef0fffff]
[ 0.457396] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.457559] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.457713] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.457867] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.458018] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.458170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.458326] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.458479] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.459951] ACPI: EC: interrupt unblocked
[ 0.459951] ACPI: EC: event unblocked
[ 0.459951] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.459951] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.460021] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.460021] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.460026] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.460027] vgaarb: loaded
[ 0.460297] pps_core: LinuxPPS API ver. 1 registered
[ 0.460299] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.460303] PTP clock support registered
[ 0.460315] EDAC MC: Ver: 3.0.0
[ 0.460814] Registered efivars operations
[ 0.483372] PCI: Using ACPI for IRQ routing
[ 0.496717] PCI: pci_cache_line_size set to 64 bytes
[ 0.497463] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.497465] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.497468] e820: reserve RAM buffer [mem 0x91c30000-0x93ffffff]
[ 0.497470] e820: reserve RAM buffer [mem 0x9988b000-0x9bffffff]
[ 0.497473] e820: reserve RAM buffer [mem 0x9b2ff000-0x9bffffff]
[ 0.497475] e820: reserve RAM buffer [mem 0x15f000000-0x15fffffff]
[ 0.500003] NetLabel: Initializing
[ 0.500003] NetLabel: domain hash size = 128
[ 0.500003] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.500003] NetLabel: unlabeled traffic allowed by default
[ 0.500827] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.500841] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.502910] clocksource: Switched to clocksource tsc-early
[ 0.521512] VFS: Disk quotas dquot_6.6.0
[ 0.521542] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.521667] pnp: PnP ACPI init
[ 0.522376] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.522382] system 00:00: [io 0xffff] has been reserved
[ 0.522385] system 00:00: [io 0xffff] has been reserved
[ 0.522389] system 00:00: [io 0xffff] has been reserved
[ 0.522393] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.522396] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.522407] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.522698] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.522791] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.522800] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.523255] pnp 00:03: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.523950] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.523954] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.523960] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.523964] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.523967] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.523971] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.523975] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.523979] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.523983] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.523987] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.523996] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.524099] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.524103] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.524107] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.524111] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.524115] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.524118] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.524122] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.524129] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.525004] system 00:06: [io 0xff00-0xfffe] has been reserved
[ 0.525012] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.528701] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.528705] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.528709] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.528712] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.528716] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.528725] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.531863] pnp: PnP ACPI: found 8 devices
[ 0.539007] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.539048] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.539072] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.539079] pci 0000:00:1c.3: bridge window [mem 0xef000000-0xef0fffff]
[ 0.539092] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.539096] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.539099] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.539102] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.539104] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.539107] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.539110] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.539113] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.539116] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.539119] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.539121] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.539124] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.539127] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.539130] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.539133] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.539135] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.539138] pci_bus 0000:00: resource 20 [mem 0xa0000000-0xefffffff window]
[ 0.539141] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[ 0.539145] pci_bus 0000:02: resource 1 [mem 0xef000000-0xef0fffff]
[ 0.539560] NET: Registered protocol family 2
[ 0.539811] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.539842] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.539943] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.540056] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.540101] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.540124] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.540203] NET: Registered protocol family 1
[ 0.540211] NET: Registered protocol family 44
[ 0.540229] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.541188] PCI: CLS 0 bytes, default 64
[ 0.541246] Unpacking initramfs...
[ 1.032154] Freeing initrd memory: 15576K
[ 1.032216] DMAR: ACPI device "device:6d" under DMAR at fed91000 as 00:15.0
[ 1.032223] DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.1
[ 1.032228] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:1e.2
[ 1.032234] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:1e.0
[ 1.032267] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.032271] software IO TLB [mem 0x8ca09000-0x90a09000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[ 1.032316] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x172daa3a18b, max_idle_ns: 440795212390 ns
[ 1.032343] clocksource: Switched to clocksource tsc
[ 1.032516] Scanning for low memory corruption every 60 seconds
[ 1.033701] Initialise system trusted keyrings
[ 1.033716] Key type blacklist registered
[ 1.033794] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[ 1.035977] zbud: loaded
[ 1.036581] pstore: using lz4hc compression
[ 1.038435] Key type asymmetric registered
[ 1.038437] Asymmetric key parser 'x509' registered
[ 1.038488] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.038539] io scheduler noop registered
[ 1.038540] io scheduler deadline registered
[ 1.038610] io scheduler cfq registered (default)
[ 1.038613] io scheduler mq-deadline registered
[ 1.038614] io scheduler kyber registered
[ 1.038654] io scheduler bfq registered
[ 1.039962] pcieport 0000:00:1c.3: AER enabled with IRQ 123
[ 1.040028] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 1.040069] pcieport 0000:00:1c.3: Signaling PME with IRQ 123
[ 1.040119] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.040238] efifb: probing for efifb
[ 1.040261] efifb: framebuffer at 0xd0000000, using 1920k, total 1920k
[ 1.040263] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 1.040264] efifb: scrolling: redraw
[ 1.040268] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.042345] Console: switching to colour frame buffer device 100x37
[ 1.044256] fb0: EFI VGA frame buffer device
[ 1.044275] intel_idle: MWAIT substates: 0x11142120
[ 1.044277] intel_idle: v0.4.1 model 0x8E
[ 1.044662] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.044760] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:01/PNP0C0D:00/input/input0
[ 1.044774] ACPI: Lid Switch [LID]
[ 1.044904] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.044919] ACPI: Sleep Button [SLPB]
[ 1.044976] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.044986] ACPI: Power Button [PWRB]
[ 1.045042] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.045061] ACPI: Power Button [PWRF]
[ 1.052979] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.052982] ACPI: Thermal Zone [THRM] (40 C)
[ 1.053408] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.056101] intel_pstate: Intel P-state driver initializing
[ 1.056576] intel_pstate: HWP enabled
[ 1.056605] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.056640] intel_pmc_core: initialized
[ 1.056861] NET: Registered protocol family 10
[ 1.059869] Segment Routing with IPv6
[ 1.059887] NET: Registered protocol family 17
[ 1.060163] RAS: Correctable Errors collector initialized.
[ 1.060193] microcode: sig=0x806e9, pf=0x80, revision=0x8e
[ 1.060338] microcode: Microcode Update Driver: v2.2.
[ 1.060347] sched_clock: Marking stable (1060333891, 0)->(1051098799, 9235092)
[ 1.060583] registered taskstats version 1
[ 1.060591] Loading compiled-in X.509 certificates
[ 1.060606] zswap: loaded using pool lzo/zbud
[ 1.063289] Key type big_key registered
[ 1.064507] Magic number: 14:904:820
[ 1.064573] hctosys: unable to open rtc device (rtc0)
[ 1.065939] Freeing unused kernel memory: 1488K
[ 1.065941] Write protecting the kernel read-only data: 16384k
[ 1.066431] Freeing unused kernel memory: 2016K
[ 1.067449] Freeing unused kernel memory: 568K
[ 1.183831] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 1.183832] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.185356] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.196408] ACPI: bus type USB registered
[ 1.196428] usbcore: registered new interface driver usbfs
[ 1.196434] usbcore: registered new interface driver hub
[ 1.196464] usbcore: registered new device driver usb
[ 1.199048] SCSI subsystem initialized
[ 1.203691] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.203698] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.204526] libata version 3.00 loaded.
[ 1.204794] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
[ 1.204800] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.205017] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.205018] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.205020] usb usb1: Product: xHCI Host Controller
[ 1.205021] usb usb1: Manufacturer: Linux 4.18.3-arch1-1-ARCH xhci-hcd
[ 1.205022] usb usb1: SerialNumber: 0000:00:14.0
[ 1.205158] hub 1-0:1.0: USB hub found
[ 1.205184] hub 1-0:1.0: 12 ports detected
[ 1.206000] ahci 0000:00:17.0: version 3.0
[ 1.206493] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.206497] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.208388] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.208394] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.208398] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.208462] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 1.208464] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.208467] usb usb2: Product: xHCI Host Controller
[ 1.208469] usb usb2: Manufacturer: Linux 4.18.3-arch1-1-ARCH xhci-hcd
[ 1.208470] usb usb2: SerialNumber: 0000:00:14.0
[ 1.208609] hub 2-0:1.0: USB hub found
[ 1.208629] hub 2-0:1.0: 6 ports detected
[ 1.209077] usb: port power management may be unreliable
[ 1.210069] scsi host0: ahci
[ 1.210269] ata1: SATA max UDMA/133 abar m2048@0xef135000 port 0xef135100 irq 125
[ 1.250668] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.521256] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.523586] ata1.00: ATA-9: HFS128G39TND-N210A, 30200P10, max UDMA/133
[ 1.523591] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.524957] ata1.00: configured for UDMA/133
[ 1.525439] scsi 0:0:0:0: Direct-Access ATA HFS128G39TND-N21 0P10 PQ: 0 ANSI: 5
[ 1.531171] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.531178] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.531271] sd 0:0:0:0: [sda] Write Protect is off
[ 1.531276] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.531363] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.533443] sda: sda1 sda2
[ 1.534260] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.536715] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.578173] random: lvm: uninitialized urandom read (4 bytes read)
[ 1.606620] device-mapper: uevent: version 1.0.3
[ 1.606778] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 1.609160] random: lvm: uninitialized urandom read (2 bytes read)
[ 1.713330] usb 1-5: New USB device found, idVendor=04f2, idProduct=b57a, bcdDevice= 0.02
[ 1.713379] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.713384] usb 1-5: Product: USB2.0 HD UVC WebCam
[ 1.713389] usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.713393] usb 1-5: SerialNumber: 0x0001
[ 1.795138] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 1.808511] random: fast init done
[ 1.840115] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ 1.976667] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 1.982478] usb 1-9: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[ 1.982483] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.994340] systemd[1]: Detected architecture x86-64.
[ 2.002241] systemd[1]: Set hostname to <archy>.
[ 2.147682] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.147734] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.148190] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.148205] systemd[1]: Reached target Login Prompts.
[ 2.149310] systemd[1]: Created slice system-getty.slice.
[ 2.149544] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.149635] systemd[1]: Listening on Journal Socket.
[ 2.150301] systemd[1]: Mounting Huge Pages File System...
[ 2.162274] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
[ 2.190931] vboxdrv: loading out-of-tree module taints kernel.
[ 2.198041] vboxdrv: Found 4 processor cores
[ 2.220275] vboxdrv: TSC mode is Invariant, tentative frequency 1607999806 Hz
[ 2.220276] vboxdrv: Successfully loaded version 5.2.18 (interface 0x00290001)
[ 2.223510] VBoxPciLinuxInit
[ 2.223517] vboxpci: IOMMU not found (not registered)
[ 2.227161] VBoxNetAdp: Successfully started.
[ 2.229909] VBoxNetFlt: Successfully started.
[ 2.236341] systemd-journald[228]: Received request to flush runtime journal from PID 1
[ 2.421926] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5
[ 2.453892] ACPI: AC Adapter [AC0] (off-line)
[ 2.455619] rtc_cmos 00:01: RTC can wake from S4
[ 2.456117] rtc_cmos 00:01: registered as rtc0
[ 2.456158] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.469998] ACPI: Battery Slot [BAT0] (battery present)
[ 2.497806] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 2.497867] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 2.500761] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.506999] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 2.514294] Linux agpgart interface v0.103
[ 2.519907] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 2.526406] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.527585] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.533715] i2c_hid i2c-ELAN1200:00: i2c-ELAN1200:00 supply vdd not found, using dummy regulator
[ 2.533840] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.533875] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.556025] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 2.560928] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.560931] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.560932] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.560942] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.560943] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.560944] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.569323] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 2.569728] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 2.592835] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[ 2.593304] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 2.597012] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
[ 2.597144] cryptd: max_cpu_qlen set to 1000
[ 2.597877] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 2.631886] AVX2 version of gcm_enc/dec engaged.
[ 2.631888] AES CTR mode by8 optimization enabled
[ 2.654601] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.669030] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.671509] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.671513] cfg80211: failed to load regulatory.db
[ 2.686821] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.739625] Adding 4194300k swap on /dev/mapper/archy_vg-swap. Priority:-2 extents:1 across:4194300k SSFS
[ 2.752687] media: Linux media interface: v0.10
[ 2.809903] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.826940] Intel(R) Wireless WiFi driver for Linux
[ 2.826942] Copyright(c) 2003- 2015 Intel Corporation
[ 2.827345] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 2.834903] random: crng init done
[ 2.834905] random: 7 urandom warning(s) missed due to ratelimiting
[ 2.849391] iwlwifi 0000:02:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm
[ 2.916855] videodev: Linux video capture interface: v2.00
[ 2.952434] 8021q: 802.1Q VLAN Support v1.8
[ 2.954185] asus_wmi: ASUS WMI generic driver loaded
[ 3.002645] iTCO_vendor_support: vendor-support=0
[ 3.004890] checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
[ 3.004892] fb: switching to inteldrmfb from EFI VGA
[ 3.004926] Console: switching to colour dummy device 80x25
[ 3.005033] [drm] Replacing VGA console driver
[ 3.008143] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.008146] [drm] Driver supports precise vblank timestamp query.
[ 3.008738] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.012632] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 3.017470] input: ELAN1200:00 04F3:304A Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN1200:00/0018:04F3:304A.0001/input/input7
[ 3.017633] input: ELAN1200:00 04F3:304A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN1200:00/0018:04F3:304A.0001/input/input8
[ 3.018017] hid-generic 0018:04F3:304A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:304A] on i2c-ELAN1200:00
[ 3.038959] Bluetooth: Core ver 2.22
[ 3.038978] NET: Registered protocol family 31
[ 3.038979] Bluetooth: HCI device and connection manager initialized
[ 3.038983] Bluetooth: HCI socket layer initialized
[ 3.038986] Bluetooth: L2CAP socket layer initialized
[ 3.038991] Bluetooth: SCO socket layer initialized
[ 3.039126] asus_wmi: Initialization: 0x1
[ 3.039217] asus_wmi: BIOS WMI version: 9.0
[ 3.039297] asus_wmi: SFUN value: 0x2021
[ 3.040591] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.040675] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 3.043027] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 3.043213] ACPI BIOS Error (bug): Could not resolve [\_SB.ATKD.WMNB.GALS], AE_NOT_FOUND (20180531/psargs-330)
[ 3.043265] ACPI Error: Method parse/execution failed \_SB.ATKD.WMNB, AE_NOT_FOUND (20180531/psparse-516)
[ 3.043812] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.048208] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.048869] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 3.049319] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
[ 3.070341] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.070799] asus_wmi: Number of fans: 0
[ 3.077066] fbcon: inteldrmfb (fb0) is primary device
[ 3.083140] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[ 3.097453] input: ELAN1200:00 04F3:304A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN1200:00/0018:04F3:304A.0001/input/input12
[ 3.097893] hid-multitouch 0018:04F3:304A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:304A] on i2c-ELAN1200:00
[ 3.107017] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b57a)
[ 3.112405] usbcore: registered new interface driver btusb
[ 3.121302] Bluetooth: hci0: Firmware revision 0.0 build 231 week 24 2018
[ 3.127028] intel_rapl: Found RAPL domain package
[ 3.127030] intel_rapl: Found RAPL domain core
[ 3.127031] intel_rapl: Found RAPL domain uncore
[ 3.127033] intel_rapl: Found RAPL domain dram
[ 3.141946] uvcvideo 1-5:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[ 3.141949] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.141951] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.141953] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.142041] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
[ 3.142128] usbcore: registered new interface driver uvcvideo
[ 3.142129] USB Video Class driver (1.1.1)
[ 3.152559] mousedev: PS/2 mouse device common for all mice
[ 3.153847] dw-apb-uart.2: ttyS0 at MMIO 0xef134000 (irq = 20, base_baud = 115200) is a 16550A
[ 3.167442] iwlwifi 0000:02:00.0: base HW address: 14:ab:c5:8f:47:06
[ 3.244093] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.244439] thermal thermal_zone9: failed to read out thermal zone (-61)
[ 3.247500] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 3.287985] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.549501] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.826328] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.915852] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.421220] Console: switching to colour frame buffer device 240x67
[ 4.449569] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.498189] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.498192] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.498193] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.498194] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.498195] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.498197] snd_hda_codec_realtek hdaudioC0D0: Mic=0x12
[ 5.461865] audit: type=1006 audit(1534830625.459:2): pid=473 uid=0 old-auid=4294967295 auid=620 tty=(none) old-ses=4294967295 ses=1 res=1
[ 5.558321] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 5.558377] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 5.558424] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 5.558469] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 5.558513] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 5.558557] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 5.888719] fuse init (API version 7.27)
[ 23.713979] usb 1-1: new full-speed USB device number 4 using xhci_hcd
[ 23.857718] usb 1-1: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[ 23.857725] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 23.857729] usb 1-1: Product: USB Receiver
[ 23.857732] usb 1-1: Manufacturer: Logitech
[ 23.915586] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52F.0002/input/input20
[ 23.915821] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ 23.917144] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52F.0003/input/input21
[ 23.974624] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ 23.974779] usbcore: registered new interface driver usbhid
[ 23.974784] usbhid: USB HID core driver
[ 31.166308] audit: type=1006 audit(1534830651.162:3): pid=539 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 31.188835] audit: type=1006 audit(1534830651.185:4): pid=574 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 31.933723] wlp2s0: authenticate with ac:86:74:4a:4b:aa
[ 31.954252] wlp2s0: send auth to ac:86:74:4a:4b:aa (try 1/3)
[ 31.962773] wlp2s0: authenticated
[ 31.963679] wlp2s0: associate with ac:86:74:4a:4b:aa (try 1/3)
[ 31.967815] wlp2s0: RX AssocResp from ac:86:74:4a:4b:aa (capab=0x431 status=0 aid=10)
[ 31.970807] wlp2s0: associated
[ 32.071231] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 38.961610] tun: Universal TUN/TAP device driver, 1.6
[ 593.124378] wlp2s0: deauthenticated from ac:86:74:4a:4b:aa (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[ 594.274792] wlp2s0: authenticate with ac:86:74:4a:4b:9a
[ 594.283505] wlp2s0: send auth to ac:86:74:4a:4b:9a (try 1/3)
[ 594.292771] wlp2s0: authenticated
[ 594.293461] wlp2s0: associate with ac:86:74:4a:4b:9a (try 1/3)
[ 594.297734] wlp2s0: RX AssocResp from ac:86:74:4a:4b:9a (capab=0x431 status=0 aid=2)
[ 594.307416] wlp2s0: associated== Xorg.0.log ==
[ 3.117]
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
[ 3.117] Build Operating System: Linux Arch Linux
[ 3.117] Current Operating System: Linux archy 4.18.3-arch1-1-ARCH #1 SMP PREEMPT Sat Aug 18 09:22:54 UTC 2018 x86_64
[ 3.117] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/archy_vg-root rw quiet
[ 3.117] Build Date: 09 August 2018 06:37:34PM
[ 3.117]
[ 3.117] Current version of pixman: 0.34.0
[ 3.117] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.117] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.117] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 21 12:50:23 2018
[ 3.123] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.123] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.124] (==) No Layout section. Using the first Screen section.
[ 3.124] (==) No screen section available. Using defaults.
[ 3.124] (**) |-->Screen "Default Screen Section" (0)
[ 3.124] (**) | |-->Monitor "<default monitor>"
[ 3.124] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.124] (==) Automatically adding devices
[ 3.124] (==) Automatically enabling devices
[ 3.124] (==) Automatically adding GPU devices
[ 3.124] (==) Automatically binding GPU devices
[ 3.124] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3.125] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 3.125] Entry deleted from font path.
[ 3.125] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 3.127] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 3.127] Entry deleted from font path.
[ 3.127] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 3.127] Entry deleted from font path.
[ 3.128] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 3.128] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.128] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.128] (II) Module ABI versions:
[ 3.128] X.Org ANSI C Emulation: 0.4
[ 3.129] X.Org Video Driver: 24.0
[ 3.129] X.Org XInput driver : 24.1
[ 3.129] X.Org Server Extension : 10.0
[ 3.129] (++) using VT number 7
[ 3.129] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 3.130] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.472] (--) PCI:*(0@0:2:0) 8086:591e:1043:1450 rev 2, Mem @ 0xee000000/16777216, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 4.472] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.472] (II) LoadModule: "glx"
[ 4.475] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.487] (II) Module glx: vendor="X.Org Foundation"
[ 4.487] compiled for 1.20.1, module version = 1.0.0
[ 4.487] ABI class: X.Org Server Extension, version 10.0
[ 4.487] (==) Matched intel as autoconfigured driver 0
[ 4.487] (==) Matched modesetting as autoconfigured driver 1
[ 4.487] (==) Matched fbdev as autoconfigured driver 2
[ 4.487] (==) Matched vesa as autoconfigured driver 3
[ 4.487] (==) Assigned the driver to the xf86ConfigLayout
[ 4.487] (II) LoadModule: "intel"
[ 4.490] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4.494] (II) Module intel: vendor="X.Org Foundation"
[ 4.494] compiled for 1.20.0, module version = 2.99.917
[ 4.494] Module class: X.Org Video Driver
[ 4.494] ABI class: X.Org Video Driver, version 24.0
[ 4.494] (II) LoadModule: "modesetting"
[ 4.494] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.496] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.496] compiled for 1.20.1, module version = 1.20.1
[ 4.497] Module class: X.Org Video Driver
[ 4.497] ABI class: X.Org Video Driver, version 24.0
[ 4.497] (II) LoadModule: "fbdev"
[ 4.497] (WW) Warning, couldn't open module fbdev
[ 4.497] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4.497] (II) LoadModule: "vesa"
[ 4.497] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.498] (II) Module vesa: vendor="X.Org Foundation"
[ 4.498] compiled for 1.20.0, module version = 2.4.0
[ 4.498] Module class: X.Org Video Driver
[ 4.498] ABI class: X.Org Video Driver, version 24.0
[ 4.498] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4.498] (II) intel: Driver for Intel(R) HD Graphics
[ 4.498] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 4.498] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 4.498] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.498] (II) VESA: driver for VESA chipsets: vesa
[ 4.533] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180514
[ 4.533] (II) intel(0): SNA compiled from 2.99.917-831-ge7bfc906
[ 4.534] (WW) Falling back to old probe method for modesetting
[ 4.535] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 615
[ 4.535] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 4.535] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.536] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4.536] (==) intel(0): RGB weight 888
[ 4.536] (==) intel(0): Default visual is TrueColor
[ 4.537] (II) intel(0): Output eDP1 has no monitor section
[ 4.537] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 4.537] (II) intel(0): Enabled output eDP1
[ 4.538] (II) intel(0): Output HDMI1 has no monitor section
[ 4.538] (II) intel(0): Enabled output HDMI1
[ 4.538] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 4.538] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 4.538] (II) intel(0): Enabled output VIRTUAL1
[ 4.538] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 4.539] (==) intel(0): TearFree enabled
[ 4.539] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.539] (==) intel(0): DPI set to (96, 96)
[ 4.539] (II) Loading sub module "dri3"
[ 4.539] (II) LoadModule: "dri3"
[ 4.539] (II) Module "dri3" already built-in
[ 4.539] (II) Loading sub module "dri2"
[ 4.539] (II) LoadModule: "dri2"
[ 4.539] (II) Module "dri2" already built-in
[ 4.539] (II) Loading sub module "present"
[ 4.539] (II) LoadModule: "present"
[ 4.539] (II) Module "present" already built-in
[ 4.539] (II) UnloadModule: "modesetting"
[ 4.539] (II) Unloading modesetting
[ 4.539] (II) UnloadModule: "vesa"
[ 4.539] (II) Unloading vesa
[ 4.544] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[ 4.544] (==) intel(0): Backing store enabled
[ 4.544] (==) intel(0): Silken mouse disabled
[ 4.544] (II) intel(0): HW Cursor enabled
[ 4.545] (==) intel(0): DPMS enabled
[ 4.545] (==) intel(0): Display hotplug detection enabled
[ 4.546] (II) intel(0): [DRI2] Setup complete
[ 4.546] (II) intel(0): [DRI2] DRI driver: i965
[ 4.546] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 4.546] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 4.546] (II) intel(0): hardware support for Present enabled
[ 4.546] (II) Initializing extension Generic Event Extension
[ 4.546] (II) Initializing extension SHAPE
[ 4.547] (II) Initializing extension MIT-SHM
[ 4.547] (II) Initializing extension XInputExtension
[ 4.548] (II) Initializing extension XTEST
[ 4.548] (II) Initializing extension BIG-REQUESTS
[ 4.549] (II) Initializing extension SYNC
[ 4.549] (II) Initializing extension XKEYBOARD
[ 4.549] (II) Initializing extension XC-MISC
[ 4.550] (II) Initializing extension SECURITY
[ 4.550] (II) Initializing extension XFIXES
[ 4.550] (II) Initializing extension RENDER
[ 4.551] (II) Initializing extension RANDR
[ 4.551] (II) Initializing extension COMPOSITE
[ 4.552] (II) Initializing extension DAMAGE
[ 4.552] (II) Initializing extension MIT-SCREEN-SAVER
[ 4.552] (II) Initializing extension DOUBLE-BUFFER
[ 4.552] (II) Initializing extension RECORD
[ 4.553] (II) Initializing extension DPMS
[ 4.553] (II) Initializing extension Present
[ 4.553] (II) Initializing extension DRI3
[ 4.554] (II) Initializing extension X-Resource
[ 4.554] (II) Initializing extension XVideo
[ 4.554] (II) Initializing extension XVideo-MotionCompensation
[ 4.554] (II) Initializing extension GLX
[ 4.608] (II) AIGLX: Loaded and initialized i965
[ 4.608] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.608] (II) Initializing extension XFree86-VidModeExtension
[ 4.608] (II) Initializing extension XFree86-DGA
[ 4.609] (II) Initializing extension XFree86-DRI
[ 4.609] (II) Initializing extension DRI2
[ 4.618] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 4.620] (II) intel(0): Setting screen physical size to 508 x 285
[ 4.719] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4.719] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4.719] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4.719] (II) LoadModule: "libinput"
[ 4.719] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4.727] (II) Module libinput: vendor="X.Org Foundation"
[ 4.727] compiled for 1.20.0, module version = 0.28.0
[ 4.727] Module class: X.Org XInput Driver
[ 4.727] ABI class: X.Org XInput driver, version 24.1
[ 4.727] (II) Using input driver 'libinput' for 'Power Button'
[ 4.727] (**) Power Button: always reports core events
[ 4.727] (**) Option "Device" "/dev/input/event3"
[ 4.727] (**) Option "_source" "server/udev"
[ 4.727] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 4.727] (II) event3 - Power Button: device is a keyboard
[ 4.727] (II) event3 - Power Button: device removed
[ 4.760] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 4.760] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.761] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 4.761] (II) event3 - Power Button: device is a keyboard
[ 4.761] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event5)
[ 4.761] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 4.761] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 4.761] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 4.761] (**) Asus Wireless Radio Control: always reports core events
[ 4.761] (**) Option "Device" "/dev/input/event5"
[ 4.761] (**) Option "_source" "server/udev"
[ 4.762] (II) event5 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 4.762] (II) event5 - Asus Wireless Radio Control: device is a keyboard
[ 4.762] (II) event5 - Asus Wireless Radio Control: device removed
[ 4.817] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5/event5"
[ 4.817] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 4.818] (II) event5 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 4.818] (II) event5 - Asus Wireless Radio Control: device is a keyboard
[ 4.820] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 4.820] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 4.820] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 4.820] (II) Using input driver 'libinput' for 'Video Bus'
[ 4.820] (**) Video Bus: always reports core events
[ 4.820] (**) Option "Device" "/dev/input/event7"
[ 4.820] (**) Option "_source" "server/udev"
[ 4.821] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 4.821] (II) event7 - Video Bus: device is a keyboard
[ 4.821] (II) event7 - Video Bus: device removed
[ 4.877] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[ 4.877] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 4.878] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 4.878] (II) event7 - Video Bus: device is a keyboard
[ 4.880] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 4.880] (II) No input driver specified, ignoring this device.
[ 4.880] (II) This device may have been added with another device file.
[ 4.881] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4.881] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4.881] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4.881] (II) Using input driver 'libinput' for 'Power Button'
[ 4.881] (**) Power Button: always reports core events
[ 4.881] (**) Option "Device" "/dev/input/event2"
[ 4.881] (**) Option "_source" "server/udev"
[ 4.882] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 4.882] (II) event2 - Power Button: device is a keyboard
[ 4.882] (II) event2 - Power Button: device removed
[ 4.920] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 4.920] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 4.922] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 4.922] (II) event2 - Power Button: device is a keyboard
[ 4.923] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 4.923] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 4.923] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 4.923] (II) Using input driver 'libinput' for 'Sleep Button'
[ 4.923] (**) Sleep Button: always reports core events
[ 4.923] (**) Option "Device" "/dev/input/event1"
[ 4.923] (**) Option "_source" "server/udev"
[ 4.924] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 4.924] (II) event1 - Sleep Button: device is a keyboard
[ 4.924] (II) event1 - Sleep Button: device removed
[ 4.960] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 4.960] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 4.962] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 4.962] (II) event1 - Sleep Button: device is a keyboard
[ 4.964] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event10)
[ 4.964] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[ 4.964] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[ 4.964] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[ 4.964] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[ 4.964] (**) Option "Device" "/dev/input/event10"
[ 4.964] (**) Option "_source" "server/udev"
[ 4.965] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 4.965] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 4.965] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[ 5.054] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13/event10"
[ 5.054] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 11)
[ 5.055] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 5.055] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 5.057] (II) config/udev: Adding input device ELAN1200:00 04F3:304A Touchpad (/dev/input/event8)
[ 5.057] (**) ELAN1200:00 04F3:304A Touchpad: Applying InputClass "libinput touchpad catchall"
[ 5.057] (**) ELAN1200:00 04F3:304A Touchpad: Applying InputClass "libinput touchpad catchall"
[ 5.057] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:304A Touchpad'
[ 5.057] (**) ELAN1200:00 04F3:304A Touchpad: always reports core events
[ 5.057] (**) Option "Device" "/dev/input/event8"
[ 5.057] (**) Option "_source" "server/udev"
[ 5.165] (II) event8 - ELAN1200:00 04F3:304A Touchpad: is tagged by udev as: Touchpad
[ 5.168] (II) event8 - ELAN1200:00 04F3:304A Touchpad: device is a touchpad
[ 5.168] (II) event8 - ELAN1200:00 04F3:304A Touchpad: device removed
[ 5.253] (**) Option "Tapping" "on"
[ 5.254] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN1200:00/0018:04F3:304A.0001/input/input12/event8"
[ 5.254] (II) XINPUT: Adding extended input device "ELAN1200:00 04F3:304A Touchpad" (type: TOUCHPAD, id 12)
[ 5.254] (**) Option "AccelerationScheme" "none"
[ 5.254] (**) ELAN1200:00 04F3:304A Touchpad: (accel) selected scheme none/0
[ 5.254] (**) ELAN1200:00 04F3:304A Touchpad: (accel) acceleration factor: 2.000
[ 5.254] (**) ELAN1200:00 04F3:304A Touchpad: (accel) acceleration threshold: 4
[ 5.256] (II) event8 - ELAN1200:00 04F3:304A Touchpad: is tagged by udev as: Touchpad
[ 5.256] (II) event8 - ELAN1200:00 04F3:304A Touchpad: device is a touchpad
[ 5.258] (II) config/udev: Adding input device ELAN1200:00 04F3:304A Touchpad (/dev/input/mouse0)
[ 5.258] (II) No input driver specified, ignoring this device.
[ 5.258] (II) This device may have been added with another device file.
[ 5.259] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 5.259] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5.259] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5.259] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 5.259] (**) Asus WMI hotkeys: always reports core events
[ 5.259] (**) Option "Device" "/dev/input/event9"
[ 5.259] (**) Option "_source" "server/udev"
[ 5.260] (II) event9 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 5.260] (II) event9 - Asus WMI hotkeys: device is a keyboard
[ 5.260] (II) event9 - Asus WMI hotkeys: device removed
[ 5.347] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input10/event9"
[ 5.347] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 5.348] (II) event9 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 5.348] (II) event9 - Asus WMI hotkeys: device is a keyboard
[ 5.350] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 5.350] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.350] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.350] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 5.350] (**) AT Translated Set 2 keyboard: always reports core events
[ 5.350] (**) Option "Device" "/dev/input/event4"
[ 5.350] (**) Option "_source" "server/udev"
[ 5.351] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5.351] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 5.351] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 5.387] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 5.387] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 5.388] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5.388] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 5.389] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 5.389] (II) No input driver specified, ignoring this device.
[ 5.389] (II) This device may have been added with another device file.
[ 5.404] (II) config/udev: removing device Asus WMI hotkeys
[ 5.404] (II) event9 - Asus WMI hotkeys: device removed
[ 5.440] (II) UnloadModule: "libinput"
[ 5.440] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 5.440] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5.440] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5.440] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 5.440] (**) Asus WMI hotkeys: always reports core events
[ 5.440] (**) Option "Device" "/dev/input/event9"
[ 5.440] (**) Option "_source" "server/udev"
[ 5.441] (II) event9 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 5.441] (II) event9 - Asus WMI hotkeys: device is a keyboard
[ 5.441] (II) event9 - Asus WMI hotkeys: device removed
[ 5.474] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input10/event9"
[ 5.475] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 5.475] (II) event9 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 5.475] (II) event9 - Asus WMI hotkeys: device is a keyboard
[ 5.476] (II) config/udev: removing device USB2.0 HD UVC WebCam: USB2.0 HD
[ 5.476] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[ 5.500] (II) UnloadModule: "libinput"
[ 5.500] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event10)
[ 5.500] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[ 5.500] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[ 5.500] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[ 5.500] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[ 5.500] (**) Option "Device" "/dev/input/event10"
[ 5.500] (**) Option "_source" "server/udev"
[ 5.501] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 5.501] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 5.501] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[ 5.540] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13/event10"
[ 5.540] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 11)
[ 5.541] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 5.541] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 5.541] (II) config/udev: removing device Video Bus
[ 5.541] (II) event7 - Video Bus: device removed
[ 5.570] (II) UnloadModule: "libinput"
[ 5.570] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 5.571] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.571] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.571] (II) Using input driver 'libinput' for 'Video Bus'
[ 5.571] (**) Video Bus: always reports core events
[ 5.571] (**) Option "Device" "/dev/input/event7"
[ 5.571] (**) Option "_source" "server/udev"
[ 5.571] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 5.571] (II) event7 - Video Bus: device is a keyboard
[ 5.571] (II) event7 - Video Bus: device removed
[ 5.596] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[ 5.596] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 5.597] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 5.597] (II) event7 - Video Bus: device is a keyboard
[ 5.597] (II) config/udev: removing device ELAN1200:00 04F3:304A Touchpad
[ 5.597] (II) event8 - ELAN1200:00 04F3:304A Touchpad: device removed
[ 5.640] (II) UnloadModule: "libinput"
[ 5.641] (II) config/udev: Adding input device ELAN1200:00 04F3:304A Touchpad (/dev/input/event8)
[ 5.641] (**) ELAN1200:00 04F3:304A Touchpad: Applying InputClass "libinput touchpad catchall"
[ 5.641] (**) ELAN1200:00 04F3:304A Touchpad: Applying InputClass "libinput touchpad catchall"
[ 5.641] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:304A Touchpad'
[ 5.641] (**) ELAN1200:00 04F3:304A Touchpad: always reports core events
[ 5.641] (**) Option "Device" "/dev/input/event8"
[ 5.641] (**) Option "_source" "server/udev"
[ 5.643] (II) event8 - ELAN1200:00 04F3:304A Touchpad: is tagged by udev as: Touchpad
[ 5.643] (II) event8 - ELAN1200:00 04F3:304A Touchpad: device is a touchpad
[ 5.643] (II) event8 - ELAN1200:00 04F3:304A Touchpad: device removed
[ 5.707] (**) Option "Tapping" "on"
[ 5.707] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN1200:00/0018:04F3:304A.0001/input/input12/event8"
[ 5.707] (II) XINPUT: Adding extended input device "ELAN1200:00 04F3:304A Touchpad" (type: TOUCHPAD, id 12)
[ 5.707] (**) Option "AccelerationScheme" "none"
[ 5.707] (**) ELAN1200:00 04F3:304A Touchpad: (accel) selected scheme none/0
[ 5.707] (**) ELAN1200:00 04F3:304A Touchpad: (accel) acceleration factor: 2.000
[ 5.707] (**) ELAN1200:00 04F3:304A Touchpad: (accel) acceleration threshold: 4
[ 5.709] (II) event8 - ELAN1200:00 04F3:304A Touchpad: is tagged by udev as: Touchpad
[ 5.709] (II) event8 - ELAN1200:00 04F3:304A Touchpad: device is a touchpad
[ 5.711] (II) config/udev: Adding input device ELAN1200:00 04F3:304A Touchpad (/dev/input/mouse0)
[ 5.711] (II) No input driver specified, ignoring this device.
[ 5.711] (II) This device may have been added with another device file.
[ 5.712] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event16)
[ 5.712] (II) No input driver specified, ignoring this device.
[ 5.712] (II) This device may have been added with another device file.
[ 5.713] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 5.713] (II) No input driver specified, ignoring this device.
[ 5.713] (II) This device may have been added with another device file.
[ 5.714] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 5.714] (II) No input driver specified, ignoring this device.
[ 5.714] (II) This device may have been added with another device file.
[ 5.714] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 5.714] (II) No input driver specified, ignoring this device.
[ 5.714] (II) This device may have been added with another device file.
[ 5.715] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 5.715] (II) No input driver specified, ignoring this device.
[ 5.715] (II) This device may have been added with another device file.
[ 5.715] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event15)
[ 5.715] (II) No input driver specified, ignoring this device.
[ 5.715] (II) This device may have been added with another device file.
[ 6.539] (II) intel(0): EDID vendor "AUO", prod id 10029
[ 6.540] (II) intel(0): Printing DDC gathered Modelines:
[ 6.540] (II) intel(0): Modeline "1920x1080"x0.0 141.00 1920 1936 1952 2104 1080 1083 1097 1116 -hsync -vsync (67.0 kHz eP)
[ 23.992] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 23.992] (II) No input driver specified, ignoring this device.
[ 23.992] (II) This device may have been added with another device file.
[ 24.050] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event18)
[ 24.050] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 24.050] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 24.050] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 24.050] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 24.050] (**) Option "Device" "/dev/input/event18"
[ 24.050] (**) Option "_source" "server/udev"
[ 24.051] (II) event18 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 24.051] (II) event18 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 24.051] (II) event18 - Logitech USB Receiver Consumer Control: device removed
[ 24.080] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 24.080] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52F.0003/input/input21/event18"
[ 24.080] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 15)
[ 24.081] (**) Option "AccelerationScheme" "none"
[ 24.081] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 24.081] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 24.081] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 24.082] (II) event18 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 24.082] (II) event18 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 24.082] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 24.082] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 24.082] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 24.082] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 24.082] (**) Option "Device" "/dev/input/event18"
[ 24.082] (**) Option "_source" "_driver/libinput"
[ 24.082] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 24.082] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52F.0003/input/input21/event18"
[ 24.082] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 16)
[ 24.123] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event17)
[ 24.123] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 24.123] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 24.123] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 24.123] (**) Logitech USB Receiver: always reports core events
[ 24.123] (**) Option "Device" "/dev/input/event17"
[ 24.123] (**) Option "_source" "server/udev"
[ 24.181] (II) event17 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 24.181] (II) event17 - Logitech USB Receiver: device set to 1000 DPI
[ 24.181] (II) event17 - Logitech USB Receiver: device is a pointer
[ 24.181] (II) event17 - Logitech USB Receiver: device removed
[ 24.240] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52F.0002/input/input20/event17"
[ 24.240] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 17)
[ 24.241] (**) Option "AccelerationScheme" "none"
[ 24.241] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 24.241] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 24.241] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 24.298] (II) event17 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 24.298] (II) event17 - Logitech USB Receiver: device set to 1000 DPI
[ 24.298] (II) event17 - Logitech USB Receiver: device is a pointer== /proc/bus/input/devices ==
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:01/PNP0C0D:00/input/input0
U: Uniq=
H: Handlers=event0
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input4
U: Uniq=
H: Handlers=sysrq kbd event4 leds
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=1043 Product=0000 Version=0000
N: Name="Asus Wireless Radio Control"
P: Phys=asus-wireless/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5
U: Uniq=
H: Handlers=kbd event5 rfkill
B: PROP=0
B: EV=3
B: KEY=80000000000000 0 0 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Asus WMI hotkeys"
P: Phys=asus-nb-wmi/input0
S: Sysfs=/devices/platform/asus-nb-wmi/input/input10
U: Uniq=
H: Handlers=kbd event9 rfkill
B: PROP=0
B: EV=100013
B: KEY=1000000080000 0 800000000000 0 0 a1606f00900000 8200027800501000 e000000000000 0
B: MSC=10
I: Bus=0018 Vendor=04f3 Product=304a Version=0100
N: Name="ELAN1200:00 04F3:304A Touchpad"
P: Phys=i2c-ELAN1200:00
S: Sysfs=/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN1200:00/0018:04F3:304A.0001/input/input12
U: Uniq=
H: Handlers=event8 mouse0
B: PROP=5
B: EV=1b
B: KEY=e520 10000 0 0 0 0
B: ABS=260800000000003
B: MSC=20
I: Bus=0003 Vendor=04f2 Product=b57a Version=0002
N: Name="USB2.0 HD UVC WebCam: USB2.0 HD"
P: Phys=usb-0000:00:14.0-5/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input14
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input15
U: Uniq=
H: Handlers=event12
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input16
U: Uniq=
H: Handlers=event13
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input17
U: Uniq=
H: Handlers=event14
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=9"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input18
U: Uniq=
H: Handlers=event15
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=10"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input19
U: Uniq=
H: Handlers=event16
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0003 Vendor=046d Product=c52f Version=0111
N: Name="Logitech USB Receiver"
P: Phys=usb-0000:00:14.0-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52F.0002/input/input20
U: Uniq=
H: Handlers=event17 mouse1
B: PROP=0
B: EV=17
B: KEY=ffff0000 0 0 0 0
B: REL=143
B: MSC=10
I: Bus=0003 Vendor=046d Product=c52f Version=0111
N: Name="Logitech USB Receiver Consumer Control"
P: Phys=usb-0000:00:14.0-1/input1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52F.0003/input/input21
U: Uniq=
H: Handlers=kbd event18
B: PROP=0
B: EV=1f
B: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 1 130f938b17c000 677bfad9415fed 9ed68000004400 10000002
B: REL=40
B: ABS=100000000
B: MSC=10== journalctl ==
Aug 21 12:32:32 archy kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:01/PNP0C0D:00/input/input0
Aug 21 12:32:32 archy kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
Aug 21 12:32:32 archy kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Aug 21 12:32:32 archy kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Aug 21 12:32:32 archy kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Aug 21 12:32:32 archy kernel: input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5
Aug 21 12:32:32 archy kernel: input: PC Speaker as /devices/platform/pcspkr/input/input6
Aug 21 12:32:32 archy kernel: input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input7
Aug 21 12:32:33 archy systemd-logind[373]: Watching system buttons on /dev/input/event3 (Power Button)
Aug 21 12:32:33 archy systemd-logind[373]: Watching system buttons on /dev/input/event0 (Lid Switch)
Aug 21 12:32:33 archy systemd-logind[373]: Watching system buttons on /dev/input/event2 (Power Button)
Aug 21 12:32:33 archy systemd-logind[373]: Watching system buttons on /dev/input/event1 (Sleep Button)
Aug 21 12:32:33 archy systemd-logind[373]: Watching system buttons on /dev/input/event4 (AT Translated Set 2 keyboard)
Aug 21 12:32:33 archy kernel: input: ELAN1200:00 04F3:304A Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN1200:00/0018:04F3:304A.0001/input/input8
Aug 21 12:32:33 archy kernel: input: ELAN1200:00 04F3:304A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN1200:00/0018:04F3:304A.0001/input/input9
Aug 21 12:32:33 archy kernel: hid-generic 0018:04F3:304A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:304A] on i2c-ELAN1200:00
Aug 21 12:32:33 archy kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
Aug 21 12:32:33 archy kernel: input: ELAN1200:00 04F3:304A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN1200:00/0018:04F3:304A.0001/input/input12
Aug 21 12:32:33 archy kernel: hid-multitouch 0018:04F3:304A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:304A] on i2c-ELAN1200:00
Aug 21 12:32:33 archy kernel: input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
Aug 21 12:32:34 archy kernel: snd_hda_codec_realtek hdaudioC0D0: inputs:
Aug 21 12:32:34 archy kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
Aug 21 12:32:34 archy kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
Aug 21 12:32:34 archy kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
Aug 21 12:32:34 archy kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
Aug 21 12:32:34 archy kernel: input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
Aug 21 12:32:34 archy kernel: input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19== libinput list-devices ==
Device: Power Button
Kernel: /dev/input/event3
Group: 1
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: Asus Wireless Radio Control
Kernel: /dev/input/event5
Group: 2
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: Video Bus
Kernel: /dev/input/event7
Group: 3
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: Lid Switch
Kernel: /dev/input/event0
Group: 4
Seat: seat0, default
Capabilities: switch
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: Power Button
Kernel: /dev/input/event2
Group: 5
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: Sleep Button
Kernel: /dev/input/event1
Group: 6
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: Logitech USB Receiver
Kernel: /dev/input/event17
Group: 7
Seat: seat0, default
Capabilities: pointer
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: disabled
Nat.scrolling: disabled
Middle emulation: disabled
Calibration: n/a
Scroll methods: button
Click methods: none
Disable-w-typing: n/a
Accel profiles: flat *adaptive
Rotation: n/a
Device: Logitech USB Receiver Consumer Control
Kernel: /dev/input/event18
Group: 7
Seat: seat0, default
Capabilities: keyboard pointer
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: disabled
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: USB2.0 HD UVC WebCam: USB2.0 HD
Kernel: /dev/input/event10
Group: 8
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: ELAN1200:00 04F3:304A Touchpad
Kernel: /dev/input/event8
Group: 9
Seat: seat0, default
Size: 103x71mm
Capabilities: pointer gesture
Tap-to-click: disabled
Tap-and-drag: enabled
Tap drag lock: disabled
Left-handed: disabled
Nat.scrolling: disabled
Middle emulation: disabled
Calibration: n/a
Scroll methods: *two-finger edge
Click methods: *button-areas clickfinger
Disable-w-typing: enabled
Accel profiles: none
Rotation: n/a
Device: HDA Intel PCH Headphone
Kernel: /dev/input/event11
Group: 10
Seat: seat0, default
Capabilities:
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: HDA Intel PCH HDMI/DP,pcm=3
Kernel: /dev/input/event12
Group: 10
Seat: seat0, default
Capabilities:
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: HDA Intel PCH HDMI/DP,pcm=7
Kernel: /dev/input/event13
Group: 10
Seat: seat0, default
Capabilities:
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: HDA Intel PCH HDMI/DP,pcm=8
Kernel: /dev/input/event14
Group: 10
Seat: seat0, default
Capabilities:
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: HDA Intel PCH HDMI/DP,pcm=9
Kernel: /dev/input/event15
Group: 10
Seat: seat0, default
Capabilities:
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: HDA Intel PCH HDMI/DP,pcm=10
Kernel: /dev/input/event16
Group: 10
Seat: seat0, default
Capabilities:
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: Asus WMI hotkeys
Kernel: /dev/input/event9
Group: 11
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: AT Translated Set 2 keyboard
Kernel: /dev/input/event4
Group: 12
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/aLibinput debug-events didn't catch an event for the BTN_RIGHT
-event3 DEVICE_ADDED Power Button seat0 default group1 cap:k
-event5 DEVICE_ADDED Asus Wireless Radio Control seat0 default group2 cap:k
-event7 DEVICE_ADDED Video Bus seat0 default group3 cap:k
-event0 DEVICE_ADDED Lid Switch seat0 default group4 cap:S
-event2 DEVICE_ADDED Power Button seat0 default group5 cap:k
-event1 DEVICE_ADDED Sleep Button seat0 default group6 cap:k
-event17 DEVICE_ADDED Logitech USB Receiver seat0 default group7 cap:p left scroll-nat scroll-button
-event18 DEVICE_ADDED Logitech USB Receiver Consumer Control seat0 default group7 cap:kp scroll-nat
-event10 DEVICE_ADDED USB2.0 HD UVC WebCam: USB2.0 HD seat0 default group8 cap:k
-event8 DEVICE_ADDED ELAN1200:00 04F3:304A Touchpad seat0 default group9 cap:pg size 103x71mm tap(dl off) left scroll-nat scroll-2fg-edge click-buttonareas-clickfinger dwt-on
-event11 DEVICE_ADDED HDA Intel PCH Headphone seat0 default group10 cap:
-event12 DEVICE_ADDED HDA Intel PCH HDMI/DP,pcm=3 seat0 default group10 cap:
-event13 DEVICE_ADDED HDA Intel PCH HDMI/DP,pcm=7 seat0 default group10 cap:
-event14 DEVICE_ADDED HDA Intel PCH HDMI/DP,pcm=8 seat0 default group10 cap:
-event15 DEVICE_ADDED HDA Intel PCH HDMI/DP,pcm=9 seat0 default group10 cap:
-event16 DEVICE_ADDED HDA Intel PCH HDMI/DP,pcm=10 seat0 default group10 cap:
-event9 DEVICE_ADDED Asus WMI hotkeys seat0 default group11 cap:k
-event4 DEVICE_ADDED AT Translated Set 2 keyboard seat0 default group12 cap:k
-event8 POINTER_BUTTON +3.51s BTN_LEFT (272) pressed, seat count: 1
event8 POINTER_BUTTON +3.64s BTN_LEFT (272) released, seat count: 0
-event4 KEYBOARD_KEY +7.96s *** (-1) pressed
event4 KEYBOARD_KEY +8.10s *** (-1) pressedDoes anyone have an idea what could cause this issue ?
** External mouse works fine.
Last edited by capitan (2018-08-21 06:26:50)
Offline
#2 2018-08-21 09:18:07
- blixawillbargeld
- Member
- Registered: 2008-01-22
- Posts: 39
Re: Libinput Driver - Touchpad Right Click Not Working Anymore
Same here (Lenovo L380) since yesterday. Touchpad keys only recognice a Left-Button no matter where I press (Trackpoint buttons work as expected).
libinput debug-events shows for example
event8 POINTER_BUTTON +5.66s BTN_LEFT (272) pressed, seat count: 1
event8 POINTER_BUTTON +5.77s BTN_LEFT (272) released, seat count: 0when I press the right side button of the touchpad.
Offline
#3 2018-08-21 16:22:05
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,017
Re: Libinput Driver - Touchpad Right Click Not Working Anymore
since yesterday
Please post the tail of your pacman log (ie. "what was updated yesterday")
no matter where I press
I assume this means the touchpad has no dedicated buttons, but the events (ought to) depend on where you tap the area?
xinput
xinput list-props <id of touchpad here>Offline
#4 2018-08-22 19:13:50
- paul_wilde
- Member
- Registered: 2018-02-02
- Posts: 7
Re: Libinput Driver - Touchpad Right Click Not Working Anymore
had similar issues with my ELAN1200:00 04F3:301A Touchpad on Asus UX360C, except BOTH my touchpad buttons don't work
This is since running a kernel update to 4.18.3 (which I see OP is running), 4.18.1 has the same problem, rolling back to the 4.17.14 kernel has worked around the problem for me if it helps,
have also left bug report on kernel.org at https://bugzilla.kernel.org/show_bug.cgi?id=200899
Last edited by paul_wilde (2018-08-22 19:15:42)
Offline
#5 2018-08-23 20:53:28
- paul_wilde
- Member
- Registered: 2018-02-02
- Posts: 7
Re: Libinput Driver - Touchpad Right Click Not Working Anymore
quick update on my issues, 4.18.4 kernel fixes left mouse button but now I also have no right button
Offline
#6 2018-08-24 17:24:48
- blixawillbargeld
- Member
- Registered: 2008-01-22
- Posts: 39
Re: Libinput Driver - Touchpad Right Click Not Working Anymore
Sorry for late reply. I´m out of home at the moment and don´t have my laptop with me. Can post the xinput output next week (if it´s not solved till then).
Offline
#7 2018-08-25 17:43:32
- Jubijub
- Member
- From: Lausanne, Switzerland
- Registered: 2018-04-04
- Posts: 23
- Website
Re: Libinput Driver - Touchpad Right Click Not Working Anymore
same issue here. I haven used my laptop in 1 week, I have just updated it, and now I realize I lost the right click.
left click works as intended, and the trackpoint buttons do work as well (including the right click).
Offline
#8 2018-08-27 20:01:56
- paul_wilde
- Member
- Registered: 2018-02-02
- Posts: 7
Re: Libinput Driver - Touchpad Right Click Not Working Anymore
in the interest of adding more information, I have now added the below to my /etc/X11/Xorg.conf.d/30-touchpad.conf file which grants me 2 fingered tap = right click.
Section "InputClass"
Identifier "libinput touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "libinput"
Option "ClickMethod" "clickfinger"
EndSectionHowever, the right hand side of the touchpad (which now should act as a left click) still does not register any events.
I have also tested in kernel 4.17.14 and with this configuration the left mouse button should, and does, cover the entire bottom area of the mouse.
You do also need to ensure tapping is enabled in your mouse settings for this to work.
Last edited by paul_wilde (2018-08-27 20:02:40)
Offline
#9 2018-09-04 10:21:03
- paul_wilde
- Member
- Registered: 2018-02-02
- Posts: 7
Re: Libinput Driver - Touchpad Right Click Not Working Anymore
For those experiencing this issue, a patch is in the works by Benjamin Tissoires to resolve this.
If you wanted to test the patch for yourselves you can view it here: https://bugzilla.kernel.org/show_bug.cgi?id=200899
I have just compiled with this myself and can confirm it is currently working using 4.19rc1, I'm sure it will work in earlier kernel versions as well.
All hail the kernel devs!
Offline