Problem with Deepin DE

ESPGranEd · 2018-08-24 14:55:41

Hi, a few moments ago I finally installed Arch with Deepin DE and I get a weird problem when I trie to activate the Window Effects that it says:

"Failed to enable window effects"

I tried to research across multiple forums about some who's passing trough the same problem but I didn't get nothing, I'd appreciate any help, Thanks

V1del · 2018-08-24 15:00:05

Problems to that effect are usually caused by improper driver installation. What graphics hardware do you have? What's the output of

glxinfo | grep OpenGL #Needs mesa-demos
lspci -k
dmesg

within [ code ] tags.

ESPGranEd · 2018-08-24 15:05:49

V1del wrote:

Problems to that effect are usually caused by improper driver installation. What graphics hardware do you have? What's the output of
glxinfo | grep OpenGL #Needs mesa-demos
lspci -k
dmesg
within [ code ] tags.

I put the specs on the signature, and I did reinstall the nvidia drivers using "pacman -S nvidia". If i need to do another step to fully update my drivers, i'd appreciate x)

ESPGranEd · 2018-08-24 15:26:06

Ok, I think I found the problem, I went to Nvidia's website and i downloaded the .run file that uupdate the drivers upto the latest version, instead using the pacman command to do it and the file throws me an error saying that im running an X server.(In the Installation process, i choose Xorg intead of Wayland) Now the question is, i can swap the xorg configuration and install wayland's one and see if i can fix the problem?

V1del · 2018-08-24 15:28:53

No, to everything you are attempting to do here. Please post the outputs I've requested, then we have a better overview over your setup and can properly assist you.

Either way you are likely on an Optimus system and will want to read https://wiki.archlinux.org/index.php/NVIDIA_Optimus

Last edited by V1del (2018-08-24 15:36:34)

ESPGranEd · 2018-08-24 16:26:10

V1del wrote:

No, to everything you are attempting to do here. Please post the outputs I've requested, then we have a better overview over your setup and can properly assist you.
Either way you are likely on an Optimus system and will want to read https://wiki.archlinux.org/index.php/NVIDIA_Optimus

Oh sorry, here's the ouput what you requested:

glxinfo :
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 940MX/PCIe/SSE2
OpenGL core profile version string: 4.6.0 NVIDIA 396.54
OpenGL core profile shading language version string: 4.60 NVIDIA
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 4.6.0 NVIDIA 396.54
OpenGL shading language version string: 4.60 NVIDIA
OpenGL context flags: (none)
OpenGL profile mask: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 396.54
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
OpenGL ES profile extensions:

lspci -k :
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
DeviceName: Intel Kabylake UHD Graphics ULT GT2
Subsystem: Hewlett-Packard Company UHD Graphics 620
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 08)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP USB 3.0 xHCI Controller
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP Thermal subsystem
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP CSME HECI
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP SATA Controller [AHCI mode]
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E (rev 21)
Subsystem: Hewlett-Packard Company Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP PMC
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP HD Audio
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
Subsystem: Hewlett-Packard Company Sunrise Point-LP SMBus
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940MX] (rev a2)
DeviceName: NVIDIA GeForce 940MX
Subsystem: Hewlett-Packard Company GM108M [GeForce 940MX]
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia_drm, nvidia
02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
DeviceName: Intel Dual BandWireless-AC 7265 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter
Subsystem: Intel Corporation Dual Band Wireless-AC 7265
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
DeviceName: Realtek PCIe GBE Family Controller
Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Kernel driver in use: r8169
Kernel modules: r8169

dmesg:
[ 0.000000] Linux version 4.18.4-arch1-1-ARCH (builduser@heftig-9371) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Wed Aug 22 07:33:26 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a976e549-dfac-4f77-b756-0a0c9e3fd869 rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007237cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007237d000-0x000000007237dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007237e000-0x000000007237efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007237f000-0x0000000089e9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000089e9e000-0x000000008a09dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000008a09e000-0x000000008a88dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008a88e000-0x000000008af7dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008af7e000-0x000000008affdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008affe000-0x000000008affefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x8affd014 SMBIOS=0x8a0d8000 SMBIOS 3.0=0x8a0d6000 ESRT=0x8a0d47d8 MEMATTR=0x7a595018
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: HP HP Pavilion Laptop 15-ck0xx/841C, BIOS F.09 06/22/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x46f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000000] 3 base 008C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 008B800000 mask 7FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] last_pfn = 0x8afff max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x000000008a0d47d8 to 0x000000008a0d4810.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x23ee77000, 0x23ee77fff] PGTABLE
[ 0.000000] BRK [0x23ee78000, 0x23ee78fff] PGTABLE
[ 0.000000] BRK [0x23ee79000, 0x23ee79fff] PGTABLE
[ 0.000000] BRK [0x23ee7a000, 0x23ee7afff] PGTABLE
[ 0.000000] BRK [0x23ee7b000, 0x23ee7bfff] PGTABLE
[ 0.000000] BRK [0x23ee7c000, 0x23ee7cfff] PGTABLE
[ 0.000000] BRK [0x23ee7d000, 0x23ee7dfff] PGTABLE
[ 0.000000] BRK [0x23ee7e000, 0x23ee7efff] PGTABLE
[ 0.000000] BRK [0x23ee7f000, 0x23ee7ffff] PGTABLE
[ 0.000000] BRK [0x23ee80000, 0x23ee80fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x36e1f000-0x37706fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000008AFFD014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000008AFBA188 000124 (v01 HPQOEM SLIC-MPC 00000000 HP 01000013)
[ 0.000000] ACPI: FACP 0x000000008AFE2000 00010C (v05 HPQOEM SLIC-MPC 00000000 HP 00040000)
[ 0.000000] ACPI: DSDT 0x000000008AFBD000 0213B6 (v02 HPQOEM 841C 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000008AF52000 000040
[ 0.000000] ACPI: UEFI 0x000000008AFFC000 000236 (v01 HPQOEM 841C 00000001 HP 00040000)
[ 0.000000] ACPI: UEFI 0x000000008AFFB000 000042 (v01 HPQOEM 841C 00000002 HP 00040000)
[ 0.000000] ACPI: IHIS 0x000000008AFFA000 000038 (v01 HPQOEM 841C 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFF3000 0068A2 (v01 HPQOEM 841C 00001000 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000008AFF2000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFF1000 0004C3 (v02 HPQOEM 841C 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFF0000 000046 (v02 HPQOEM 841C 00003000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x000000008AFEF000 000034 (v03 HPQOEM 841C 00000000 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFEB000 00312C (v02 HPQOEM 841C 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFE7000 003E85 (v02 HPQOEM 841C 00001000 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x000000008AFE6000 0000A5 (v32 HPQOEM 841C 00000001 HP 00040000)
[ 0.000000] ACPI: ASPT 0x000000008AFE5000 000034 (v07 HPQOEM 841C 00000001 HP 00040000)
[ 0.000000] ACPI: BOOT 0x000000008AFE4000 000028 (v01 HPQOEM 841C 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 0x000000008AFE3000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 0x000000008AFE1000 000038 (v01 HPQOEM 841C 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 0x000000008AFE0000 0000BC (v03 HPQOEM 841C 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 0x000000008AFDF000 00003C (v01 HPQOEM 841C 00000001 HP 00040000)
[ 0.000000] ACPI: LPIT 0x000000008AFBC000 000094 (v01 HPQOEM 841C 00000000 HP 00040000)
[ 0.000000] ACPI: WSMT 0x000000008AFBB000 000028 (v01 HPQOEM 841C 00000000 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFB9000 00029F (v02 HPQOEM 841C 00000000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFB8000 000346 (v01 HPQOEM 841C 00000000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFB4000 003002 (v02 HPQOEM 841C 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFB3000 00051E (v02 HPQOEM 841C 00001000 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000008AFB2000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
[ 0.000000] ACPI: DBG2 0x000000008AFB1000 000054 (v00 HPQOEM 841C 00000002 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFAF000 0010B0 (v02 HPQOEM 841C 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFAE000 000EDE (v02 HPQOEM 841C 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008AFAA000 003A2E (v01 HPQOEM 841C 00001000 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x000000008AFA9000 0000A8 (v01 HPQOEM 841C 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 0x000000008AFA8000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
[ 0.000000] ACPI: BGRT 0x000000008AFA7000 000038 (v01 HPQOEM 841C 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000046effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x46effc000-0x46effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000046effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007237cfff]
[ 0.000000] node 0: [mem 0x000000007237f000-0x0000000089e9dfff]
[ 0.000000] node 0: [mem 0x000000008affe000-0x000000008affefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000046effffff]
[ 0.000000] Reserved but unavailable: 25031 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
[ 0.000000] On node 0 totalpages: 4165177
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8763 pages used for memmap
[ 0.000000] DMA32 zone: 560797 pages, LIFO batch:31
[ 0.000000] Normal zone: 56256 pages used for memmap
[ 0.000000] Normal zone: 3600384 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7237d000-0x7237dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7237e000-0x7237efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89e9e000-0x8a09dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a09e000-0x8a88dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a88e000-0x8af7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8af7e000-0x8affdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8afff000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4100072
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a976e549-dfac-4f77-b756-0a0c9e3fd869 rw quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16264452K/16660708K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1492K init, 612K bss, 396256K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 33392 entries in 131 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.003333] APIC: Switch to symmetric I/O mode setup
[ 0.003333] DMAR: Host address width 39
[ 0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.003333] DMAR: RMRR base: 0x0000008a713000 end: 0x0000008a732fff
[ 0.003333] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
[ 0.003333] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.003333] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.003333] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.003333] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.003333] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.023333] tsc: Detected 2000.000 MHz processor
[ 0.023333] tsc: Detected 1992.000 MHz TSC
[ 0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[ 0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3985.00 BogoMIPS (lpj=6640000)
[ 0.023333] pid_max: default: 32768 minimum: 301
[ 0.023333] Security Framework initialized
[ 0.023333] Yama: becoming mindful.
[ 0.023333] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.027636] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.027674] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.027703] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.027864] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.027864] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.027875] mce: CPU supports 10 MCE banks
[ 0.027882] CPU0: Thermal monitoring enabled (TM1)
[ 0.027895] process: using mwait in idle threads
[ 0.027897] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.027898] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.027898] Spectre V2 : Mitigation: Full generic retpoline
[ 0.027899] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.027899] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.027899] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.027900] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.030277] Freeing SMP alternatives memory: 28K
[ 0.033417] TSC deadline timer enabled
[ 0.033421] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[ 0.053372] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.053411] ... version: 4
[ 0.053412] ... bit width: 48
[ 0.053412] ... generic registers: 4
[ 0.053413] ... value mask: 0000ffffffffffff
[ 0.053413] ... max period: 00007fffffffffff
[ 0.053413] ... fixed-purpose events: 3
[ 0.053414] ... event mask: 000000070000000f
[ 0.060017] Hierarchical SRCU implementation.
[ 0.080204] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.086682] smp: Bringing up secondary CPUs ...
[ 0.126728] x86: Booting SMP configuration:
[ 0.126729] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.367401] smp: Brought up 1 node, 8 CPUs
[ 0.367401] smpboot: Max logical packages: 1
[ 0.367401] smpboot: Total of 8 processors activated (31884.00 BogoMIPS)
[ 0.370355] devtmpfs: initialized
[ 0.370355] x86/mm: Memory block size: 128MB
[ 0.370833] PM: Registering ACPI NVS region [mem 0x7237d000-0x7237dfff] (4096 bytes)
[ 0.370833] PM: Registering ACPI NVS region [mem 0x8a88e000-0x8af7dfff] (7274496 bytes)
[ 0.370833] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.370833] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.370833] pinctrl core: initialized pinctrl subsystem
[ 0.370833] RTC time: 16:03:53, date: 08/24/18
[ 0.370833] NET: Registered protocol family 16
[ 0.370833] audit: initializing netlink subsys (disabled)
[ 0.370833] audit: type=2000 audit(1535126633.369:1): state=initialized audit_enabled=0 res=1
[ 0.373383] cpuidle: using governor ladder
[ 0.373383] cpuidle: using governor menu
[ 0.373383] Simple Boot Flag at 0x44 set to 0x1
[ 0.373383] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.373383] ACPI: bus type PCI registered
[ 0.373383] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.373424] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.373429] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.373429] PCI: Using configuration type 1 for base access
[ 0.374083] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.374083] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.374083] ACPI: Added _OSI(Module Device)
[ 0.374083] ACPI: Added _OSI(Processor Device)
[ 0.374083] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.374083] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.374083] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.404227] ACPI: 13 ACPI AML tables successfully acquired and loaded
[ 0.406915] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.413529] ACPI: Dynamic OEM Table Load:
[ 0.413540] ACPI: SSDT 0xFFFF96631BCB0800 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.413744] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.414170] ACPI: Dynamic OEM Table Load:
[ 0.414176] ACPI: SSDT 0xFFFF96631B850800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.414543] ACPI: Dynamic OEM Table Load:
[ 0.414548] ACPI: SSDT 0xFFFF96631B890600 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.414803] ACPI: Dynamic OEM Table Load:
[ 0.414808] ACPI: SSDT 0xFFFF96631B891600 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.415031] ACPI: Dynamic OEM Table Load:
[ 0.415031] ACPI: SSDT 0xFFFF96631BCB1800 00065C (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.415031] ACPI: Dynamic OEM Table Load:
[ 0.415031] ACPI: SSDT 0xFFFF96631BF77600 000197 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.416846] ACPI: Dynamic OEM Table Load:
[ 0.416846] ACPI: SSDT 0xFFFF96631B892200 00018A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.418901] ACPI: EC: EC started
[ 0.418902] ACPI: EC: interrupt blocked
[ 0.555932] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.555933] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.555934] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.555934] ACPI: Interpreter enabled
[ 0.555969] ACPI: (supports S0 S3 S4 S5)
[ 0.555970] ACPI: Using IOAPIC for interrupt routing
[ 0.555998] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.556473] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.559288] ACPI: Power Resource [PC01] (on)
[ 0.559988] ACPI: Power Resource [WRST] (on)
[ 0.560332] ACPI: Power Resource [WRST] (on)
[ 0.560675] ACPI: Power Resource [WRST] (on)
[ 0.561211] ACPI: Power Resource [WRST] (on)
[ 0.561449] ACPI: Power Resource [WRST] (on)
[ 0.561685] ACPI: Power Resource [WRST] (on)
[ 0.562028] ACPI: Power Resource [WRST] (on)
[ 0.562372] ACPI: Power Resource [WRST] (on)
[ 0.562715] ACPI: Power Resource [WRST] (on)
[ 0.563057] ACPI: Power Resource [WRST] (on)
[ 0.563408] ACPI: Power Resource [WRST] (on)
[ 0.563733] ACPI: Power Resource [WRST] (on)
[ 0.564054] ACPI: Power Resource [WRST] (on)
[ 0.564376] ACPI: Power Resource [WRST] (on)
[ 0.564697] ACPI: Power Resource [WRST] (on)
[ 0.565018] ACPI: Power Resource [WRST] (on)
[ 0.565339] ACPI: Power Resource [WRST] (on)
[ 0.565658] ACPI: Power Resource [WRST] (on)
[ 0.565981] ACPI: Power Resource [WRST] (on)
[ 0.571978] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.571982] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.574298] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.574299] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.575883] PCI host bridge to bus 0000:00
[ 0.575885] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.575886] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.575887] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.575888] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.575889] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.575889] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.575890] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.575891] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.575892] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.575893] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.575893] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.575894] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[ 0.575895] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.575896] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.575903] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[ 0.576542] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[ 0.576552] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb2ffffff 64bit]
[ 0.576557] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.576560] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.576572] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.577216] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.577228] pci 0000:00:04.0: reg 0x10: [mem 0xb4220000-0xb4227fff 64bit]
[ 0.577946] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.577968] pci 0000:00:14.0: reg 0x10: [mem 0xb4200000-0xb420ffff 64bit]
[ 0.578032] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.578728] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.578752] pci 0000:00:14.2: reg 0x10: [mem 0xb4232000-0xb4232fff 64bit]
[ 0.579440] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.579466] pci 0000:00:16.0: reg 0x10: [mem 0xb4233000-0xb4233fff 64bit]
[ 0.579539] pci 0000:00:16.0: PME# supported from D3hot
[ 0.580233] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.580251] pci 0000:00:17.0: reg 0x10: [mem 0xb4230000-0xb4231fff]
[ 0.580258] pci 0000:00:17.0: reg 0x14: [mem 0xb4236000-0xb42360ff]
[ 0.580265] pci 0000:00:17.0: reg 0x18: [io 0x5080-0x5087]
[ 0.580272] pci 0000:00:17.0: reg 0x1c: [io 0x5088-0x508b]
[ 0.580280] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
[ 0.580287] pci 0000:00:17.0: reg 0x24: [mem 0xb4234000-0xb42347ff]
[ 0.580327] pci 0000:00:17.0: PME# supported from D3hot
[ 0.580983] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.581052] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.581741] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.581810] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.582487] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.582555] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.583247] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[ 0.583996] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.584012] pci 0000:00:1f.2: reg 0x10: [mem 0xb422c000-0xb422ffff]
[ 0.584703] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.584731] pci 0000:00:1f.3: reg 0x10: [mem 0xb4228000-0xb422bfff 64bit]
[ 0.584763] pci 0000:00:1f.3: reg 0x20: [mem 0xb4210000-0xb421ffff 64bit]
[ 0.584811] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.585537] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.585599] pci 0000:00:1f.4: reg 0x10: [mem 0xb4235000-0xb42350ff 64bit]
[ 0.585669] pci 0000:00:1f.4: reg 0x20: [io 0x5040-0x505f]
[ 0.586425] pci 0000:01:00.0: [10de:134d] type 00 class 0x030200
[ 0.586449] pci 0000:01:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
[ 0.586461] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.586473] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.586481] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
[ 0.586489] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.586651] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.586654] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.586656] pci 0000:00:1c.0: bridge window [mem 0xb3000000-0xb3ffffff]
[ 0.586660] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.586860] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.586959] pci 0000:02:00.0: reg 0x10: [mem 0xb4100000-0xb4101fff 64bit]
[ 0.587244] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.587749] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.587753] pci 0000:00:1c.4: bridge window [mem 0xb4100000-0xb41fffff]
[ 0.587805] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.587835] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.587861] pci 0000:03:00.0: reg 0x18: [mem 0xb4004000-0xb4004fff 64bit]
[ 0.587878] pci 0000:03:00.0: reg 0x20: [mem 0xb4000000-0xb4003fff 64bit]
[ 0.587973] pci 0000:03:00.0: supports D1 D2
[ 0.587974] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588128] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.588131] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.588133] pci 0000:00:1c.5: bridge window [mem 0xb4000000-0xb40fffff]
[ 0.593844] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.593894] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.593943] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.593993] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.594042] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.594091] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.594138] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.594186] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.594738] ACPI: EC: interrupt unblocked
[ 0.594776] ACPI: EC: event unblocked
[ 0.594793] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.594794] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.594839] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.594839] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.594839] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.594839] vgaarb: loaded
[ 0.594839] pps_core: LinuxPPS API ver. 1 registered
[ 0.594839] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.594839] PTP clock support registered
[ 0.594839] EDAC MC: Ver: 3.0.0
[ 0.594839] Registered efivars operations
[ 0.631430] PCI: Using ACPI for IRQ routing
[ 0.660114] PCI: pci_cache_line_size set to 64 bytes
[ 0.660449] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.660450] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.660450] e820: reserve RAM buffer [mem 0x7237d000-0x73ffffff]
[ 0.660451] e820: reserve RAM buffer [mem 0x89e9e000-0x8bffffff]
[ 0.660452] e820: reserve RAM buffer [mem 0x8afff000-0x8bffffff]
[ 0.660453] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
[ 0.660538] NetLabel: Initializing
[ 0.660538] NetLabel: domain hash size = 128
[ 0.660538] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.660548] NetLabel: unlabeled traffic allowed by default
[ 0.660550] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.660550] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.663337] clocksource: Switched to clocksource tsc-early
[ 0.670223] VFS: Disk quotas dquot_6.6.0
[ 0.670233] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.670279] pnp: PnP ACPI init
[ 0.670864] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.670865] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.670866] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.670867] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.670868] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.670869] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.670870] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.670873] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.671105] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 0.671108] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.671275] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.671276] system 00:02: [io 0xffff] has been reserved
[ 0.671277] system 00:02: [io 0xffff] has been reserved
[ 0.671278] system 00:02: [io 0xffff] has been reserved
[ 0.671279] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.671280] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.671282] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.671357] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.671377] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.671395] pnp 00:05: Plug and Play ACPI device, IDs SYN325a SYN1e00 SYN0002 PNP0f13 (active)
[ 0.672668] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.672669] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.672670] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.672672] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.673098] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.673100] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.673101] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.673102] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.673103] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.673104] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.673105] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.673106] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.673107] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.673108] system 00:07: [mem 0x90000000-0x9001ffff] has been reserved
[ 0.673110] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.673745] pnp: PnP ACPI: found 8 devices
[ 0.679003] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.679006] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.679025] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 0.679026] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 0.679028] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.679030] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.679033] pci 0000:00:1c.0: bridge window [mem 0xb3000000-0xb3ffffff]
[ 0.679035] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.679039] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.679042] pci 0000:00:1c.4: bridge window [mem 0xb4100000-0xb41fffff]
[ 0.679047] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.679049] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.679051] pci 0000:00:1c.5: bridge window [mem 0xb4000000-0xb40fffff]
[ 0.679057] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.679058] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.679059] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.679060] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.679061] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.679062] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.679062] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.679063] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.679064] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.679065] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.679066] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.679067] pci_bus 0000:00: resource 15 [mem 0x90000000-0xdfffffff window]
[ 0.679068] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[ 0.679069] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.679070] pci_bus 0000:01: resource 1 [mem 0xb3000000-0xb3ffffff]
[ 0.679070] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.679071] pci_bus 0000:02: resource 1 [mem 0xb4100000-0xb41fffff]
[ 0.679072] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.679073] pci_bus 0000:03: resource 1 [mem 0xb4000000-0xb40fffff]
[ 0.679194] NET: Registered protocol family 2
[ 0.679282] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.679320] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.679472] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.679587] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.679613] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.679647] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.679699] NET: Registered protocol family 1
[ 0.679702] NET: Registered protocol family 44
[ 0.679708] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.681438] PCI: CLS 64 bytes, default 64
[ 0.681463] Unpacking initramfs...
[ 0.755571] Freeing initrd memory: 9120K
[ 0.755605] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.755607] software IO TLB [mem 0x858b1000-0x898b1000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[ 0.755628] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[ 0.755647] clocksource: Switched to clocksource tsc
[ 0.755740] Scanning for low memory corruption every 60 seconds
[ 0.756133] Initialise system trusted keyrings
[ 0.756141] Key type blacklist registered
[ 0.756175] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.756913] zbud: loaded
[ 0.757095] pstore: using lz4hc compression
[ 0.757744] Key type asymmetric registered
[ 0.757745] Asymmetric key parser 'x509' registered
[ 0.757764] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.757787] io scheduler noop registered
[ 0.757787] io scheduler deadline registered
[ 0.757810] io scheduler cfq registered (default)
[ 0.757811] io scheduler mq-deadline registered
[ 0.757811] io scheduler kyber registered
[ 0.757823] io scheduler bfq registered
[ 0.758479] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[ 0.758495] pcieport 0000:00:1c.4: AER enabled with IRQ 123
[ 0.758510] pcieport 0000:00:1c.5: AER enabled with IRQ 124
[ 0.758519] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 0.758527] pcieport 0000:00:1c.4: Signaling PME with IRQ 123
[ 0.758534] pcieport 0000:00:1c.5: Signaling PME with IRQ 124
[ 0.758548] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.758588] efifb: probing for efifb
[ 0.758596] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[ 0.758597] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.758597] efifb: scrolling: redraw
[ 0.758598] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.761142] Console: switching to colour frame buffer device 240x67
[ 0.763607] fb0: EFI VGA frame buffer device
[ 0.763613] intel_idle: MWAIT substates: 0x11142120
[ 0.763613] intel_idle: v0.4.1 model 0x8E
[ 0.763855] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.763909] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.763914] ACPI: Lid Switch [LID0]
[ 0.763933] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.763937] ACPI: Power Button [PWRB]
[ 0.763957] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.763984] ACPI: Power Button [PWRF]
[ 0.769865] [Firmware Bug]: Invalid critical threshold (0)
[ 0.773285] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.773285] ACPI: Thermal Zone [TZ01] (40 C)
[ 0.773439] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.774732] intel_pstate: Intel P-state driver initializing
[ 0.775373] intel_pstate: HWP enabled
[ 0.775453] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.775475] intel_pmc_core: initialized
[ 0.775610] NET: Registered protocol family 10
[ 0.778618] Segment Routing with IPv6
[ 0.778630] NET: Registered protocol family 17
[ 0.779258] RAS: Correctable Errors collector initialized.
[ 0.779276] microcode: sig=0x806ea, pf=0x80, revision=0x96
[ 0.779557] microcode: Microcode Update Driver: v2.2.
[ 0.779564] sched_clock: Marking stable (779554935, 0)->(763964937, 15589998)
[ 0.779817] registered taskstats version 1
[ 0.779824] Loading compiled-in X.509 certificates
[ 0.779834] zswap: loaded using pool lzo/zbud
[ 0.781727] Key type big_key registered
[ 0.782564] Magic number: 14:27:86
[ 0.782616] hctosys: unable to open rtc device (rtc0)
[ 0.907230] Freeing unused kernel memory: 1492K
[ 0.907232] Write protecting the kernel read-only data: 16384k
[ 0.908061] Freeing unused kernel memory: 2016K
[ 0.908776] Freeing unused kernel memory: 568K
[ 1.024087] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.031313] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.031353] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.035183] SCSI subsystem initialized
[ 1.037895] ACPI: bus type USB registered
[ 1.037920] usbcore: registered new interface driver usbfs
[ 1.037929] usbcore: registered new interface driver hub
[ 1.037958] usbcore: registered new device driver usb
[ 1.040619] libata version 3.00 loaded.
[ 1.042655] ahci 0000:00:17.0: version 3.0
[ 1.042936] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.042943] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.044016] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
[ 1.044021] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.044172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.044173] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.044178] usb usb1: Product: xHCI Host Controller
[ 1.044179] usb usb1: Manufacturer: Linux 4.18.4-arch1-1-ARCH xhci-hcd
[ 1.044180] usb usb1: SerialNumber: 0000:00:14.0
[ 1.044291] hub 1-0:1.0: USB hub found
[ 1.044307] hub 1-0:1.0: 12 ports detected
[ 1.045683] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.045686] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.045688] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.045718] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 1.045719] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.045720] usb usb2: Product: xHCI Host Controller
[ 1.045721] usb usb2: Manufacturer: Linux 4.18.4-arch1-1-ARCH xhci-hcd
[ 1.045722] usb usb2: SerialNumber: 0000:00:14.0
[ 1.045788] hub 2-0:1.0: USB hub found
[ 1.045798] hub 2-0:1.0: 6 ports detected
[ 1.046627] usb: port power management may be unreliable
[ 1.053046] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
[ 1.053048] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.053928] scsi host0: ahci
[ 1.054158] scsi host1: ahci
[ 1.054413] scsi host2: ahci
[ 1.054444] ata1: SATA max UDMA/133 abar m2048@0xb4234000 port 0xb4234100 irq 125
[ 1.054444] ata2: DUMMY
[ 1.054446] ata3: SATA max UDMA/133 abar m2048@0xb4234000 port 0xb4234200 irq 125
[ 1.116146] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.364524] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.365718] ata3.00: ATA-9: SanDisk SD8SN8U-128G-1006, X4120006, max UDMA/133
[ 1.365724] ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.368005] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.368732] ata3.00: configured for UDMA/133
[ 1.373540] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.378977] ahci 0000:00:17.0: port does not support device sleep
[ 1.380205] ata1.00: ATA-10: ST1000LM035-1RK172, RSM7, max UDMA/100
[ 1.380211] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.406324] ata1.00: configured for UDMA/100
[ 1.426854] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 RSM7 PQ: 0 ANSI: 5
[ 1.427944] scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SN8U- 0006 PQ: 0 ANSI: 5
[ 1.434190] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.434227] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.434262] sd 0:0:0:0: [sda] Write Protect is off
[ 1.434263] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.434276] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.434451] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.434453] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.434466] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.434469] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.434491] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.436712] sdb: sdb1 sdb2 sdb3
[ 1.437045] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.522610] usb 1-3: New USB device found, idVendor=04f2, idProduct=b5d6, bcdDevice=32.22
[ 1.522616] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.522620] usb 1-3: Product: HP Wide Vision HD Camera
[ 1.522624] usb 1-3: Manufacturer: Chicony
[ 1.602362] sda: sda1 sda2
[ 1.603310] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.646759] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.788837] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.03
[ 1.788843] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.928476] random: fast init done
[ 2.376244] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.553268] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 2.571008] systemd[1]: Detected architecture x86-64.
[ 2.577480] systemd[1]: Set hostname to <edupy>.
[ 2.660805] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.660854] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.660884] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.660930] systemd[1]: Listening on udev Kernel Socket.
[ 2.660938] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.662628] systemd[1]: Created slice system-getty.slice.
[ 2.662685] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.664362] systemd[1]: Listening on Process Core Dump Socket.
[ 2.664394] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.664424] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.677986] EXT4-fs (sdb2): re-mounted. Opts: (null)
[ 2.722783] systemd-journald[252]: Received request to flush runtime journal from PID 1
[ 2.815545] ACPI: AC Adapter [ADP1] (off-line)
[ 2.858682] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 2.858686] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 2.858689] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 2.858691] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 2.858909] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ 2.858938] wmi_bus wmi_bus-PNP0C14:01: WQBJ data block query control method not found
[ 2.864769] input: HP Wireless hotkeys as /devices/virtual/input/input5
[ 2.866376] rtc_cmos 00:03: RTC can wake from S4
[ 2.866889] rtc_cmos 00:03: registered as rtc0
[ 2.866911] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.869198] hp_accel: laptop model unknown, using default axes configuration
[ 2.873471] media: Linux media interface: v0.10
[ 2.874218] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.878924] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.878933] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.879700] ipmi message handler version 39.2
[ 2.882155] lis3lv02d: 8 bits 3DC sensor found
[ 2.887835] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 10:e7:c6:f3:c4:d8, XID 54100800, IRQ 128
[ 2.887837] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.896737] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 2.899612] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 2.899791] ipmi device interface
[ 2.903332] videodev: Linux video capture interface: v2.00
[ 2.905563] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.905564] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.905566] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.905567] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.905568] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.905569] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.909070] Linux agpgart interface v0.103
[ 2.909725] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.909775] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.925894] ACPI: Battery Slot [BAT0] (battery present)
[ 2.929351] cryptd: max_cpu_qlen set to 1000
[ 2.929555] Bluetooth: Core ver 2.22
[ 2.929577] NET: Registered protocol family 31
[ 2.929578] Bluetooth: HCI device and connection manager initialized
[ 2.929582] Bluetooth: HCI socket layer initialized
[ 2.929585] Bluetooth: L2CAP socket layer initialized
[ 2.929592] Bluetooth: SCO socket layer initialized
[ 2.947271] AVX2 version of gcm_enc/dec engaged.
[ 2.947272] AES CTR mode by8 optimization enabled
[ 2.971482] usbcore: registered new interface driver btusb
[ 2.971669] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.978099] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.979242] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.979245] cfg80211: failed to load regulatory.db
[ 2.985992] Bluetooth: hci0: read Intel version: 370810225019140f00
[ 2.986994] random: crng init done
[ 2.986995] random: 7 urandom warning(s) missed due to ratelimiting
[ 2.987931] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
[ 2.991262] hp_wmi: query 0xd returned error 0x5
[ 2.991318] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 2.994532] uvcvideo: Found UVC 1.00 device HP Wide Vision HD Camera (04f2:b5d6)
[ 3.015708] Intel(R) Wireless WiFi driver for Linux
[ 3.015709] Copyright(c) 2003- 2015 Intel Corporation
[ 3.015860] r8169 0000:03:00.0 eno1: renamed from eth0
[ 3.022880] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 3.026927] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.026931] uvcvideo 1-3:1.0: Entity type for entity Extension 3 was not initialized!
[ 3.026933] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.026935] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.027020] input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input10
[ 3.027095] usbcore: registered new interface driver uvcvideo
[ 3.027096] USB Video Class driver (1.1.1)
[ 3.035149] iTCO_vendor_support: vendor-support=0
[ 3.036737] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.036809] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 3.036935] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.143429] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 3.167126] iwlwifi 0000:02:00.0: base HW address: 34:41:5d:5d:a8:7c
[ 3.184099] nvidia: loading out-of-tree module taints kernel.
[ 3.184105] nvidia: module license 'NVIDIA' taints kernel.
[ 3.184106] Disabling lock debugging due to kernel taint
[ 3.214811] intel_rapl: Found RAPL domain package
[ 3.214812] intel_rapl: Found RAPL domain core
[ 3.214814] intel_rapl: Found RAPL domain uncore
[ 3.214815] intel_rapl: Found RAPL domain dram
[ 3.216381] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[ 3.216382] fb: switching to inteldrmfb from EFI VGA
[ 3.216396] Console: switching to colour dummy device 80x25
[ 3.216482] [drm] Replacing VGA console driver
[ 3.217858] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.217859] [drm] Driver supports precise vblank timestamp query.
[ 3.218574] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.219566] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 3.226047] nvidia-nvlink: Nvlink Core is being initialized, major device number 238
[ 3.226228] nvidia 0000:01:00.0: enabling device (0406 -> 0407)
[ 3.226435] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.54 Tue Aug 14 19:02:34 PDT 2018 (using threaded interrupts)
[ 3.226848] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 3.228607] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.229067] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 3.229255] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[ 3.229291] ACPI: Video Device [PXSX] (multi-head: yes rom: yes post: no)
[ 3.229332] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3a/LNXVIDEO:01/input/input12
[ 3.229459] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.234020] fbcon: inteldrmfb (fb0) is primary device
[ 3.251252] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.54 Tue Aug 14 23:08:44 PDT 2018
[ 3.252151] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.252805] thermal thermal_zone7: failed to read out thermal zone (-61)
[ 3.254152] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 3.254154] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[ 3.254549] iwlwifi 0000:02:00.0 wlo1: renamed from wlan0
[ 3.270075] Bluetooth: hci0: Intel firmware patch completed and activated
[ 3.768757] psmouse serio1: synaptics: queried max coordinates: x [..5646], y [..4736]
[ 3.804832] psmouse serio1: synaptics: queried min coordinates: x [1294..], y [1114..]
[ 3.804847] psmouse serio1: synaptics: Your touchpad (PNP: SYN325a SYN1e00 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 3.878685] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.0, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3308, fw id: 2597685
[ 3.925148] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 3.939154] mousedev: PS/2 mouse device common for all mice
[ 4.329828] Console: switching to colour frame buffer device 240x67
[ 4.355480] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.396092] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.396094] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.396095] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.396096] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.396097] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.396098] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 4.396100] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.413286] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.450328] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 4.450370] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 4.450405] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 4.450438] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 4.450479] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 4.450513] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 4.450548] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 4.552863] 8021q: 802.1Q VLAN Support v1.8
[ 4.636030] r8169 0000:03:00.0 eno1: link down
[ 4.636123] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 4.755843] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5.058640] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 5.062457] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5.193071] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5.291754] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5.475844] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180531/nsarguments-66)
[ 6.878003] audit: type=1006 audit(1535126639.875:2): pid=504 uid=0 old-auid=4294967295 auid=620 tty=(none) old-ses=4294967295 ses=1 res=1
[ 8.654470] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 9.859904] wlo1: authenticate with 34:ce:00:51:2a:7a
[ 9.866815] wlo1: send auth to 34:ce:00:51:2a:7a (try 1/3)
[ 9.870511] wlo1: authenticated
[ 9.873342] wlo1: associate with 34:ce:00:51:2a:7a (try 1/3)
[ 9.875507] wlo1: RX AssocResp from 34:ce:00:51:2a:7a (capab=0xc31 status=0 aid=2)
[ 9.877338] wlo1: associated
[ 10.885564] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 25.846694] audit: type=1006 audit(1535126658.845:3): pid=540 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 25.859055] audit: type=1006 audit(1535126658.855:4): pid=619 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 26.108152] fuse init (API version 7.27)

Last edited by ESPGranEd (2018-08-24 16:26:40)

jasonwryan · 2018-08-24 18:50:40

Read the Code of Conduct and:

a) change your thread title to one that actually describe your issue: https://wiki.archlinux.org/index.php/Co … ow_to_post

b) use code tags: https://wiki.archlinux.org/index.php/Co … s_and_code

Moving to NC.

Arch Linux

#1 2018-08-24 14:55:41

Problem with Deepin DE

#2 2018-08-24 15:00:05

Re: Problem with Deepin DE

#3 2018-08-24 15:05:49

Re: Problem with Deepin DE

#4 2018-08-24 15:26:06

Re: Problem with Deepin DE

#5 2018-08-24 15:28:53

Re: Problem with Deepin DE

#6 2018-08-24 16:26:10

Re: Problem with Deepin DE

#7 2018-08-24 18:50:40

Re: Problem with Deepin DE

Board footer