You are not logged in.

#1 2018-09-07 15:36:40

benoitldr
Member
From: Grenoble
Registered: 2016-03-03
Posts: 28

grub UEFI no such device LUKS_on_LVM

Hello,

I have managed to install on my old laptop but it was not the same configuration (bios/mbr)

On my new laptop, I want to install in mode UEFI/GPT

I am stucked since yesterday... grub respond no such device...

My configuration

fdisk -l
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 6A971875-5EA2-8046-8C60-CF01B273678D

Device       Start       End   Sectors   Size Type
/dev/sda1     2048   1050623   1048576   512M EFI System
/dev/sda2  1050624 250068991 249018368 118.8G Linux filesystem




Disk /dev/sdb: 3.8 GiB, 4027580416 bytes, 7866368 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x7e0d49cf

Device     Boot Start     End Sectors  Size Id Type
/dev/sdb1  *        0 1169407 1169408  571M  0 Empty
/dev/sdb2         164  131235  131072   64M ef EFI (FAT-12/16/32)


Disk /dev/loop0: 459.6 MiB, 481939456 bytes, 941288 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/volssd-cryptroot: 32 GiB, 34359738368 bytes, 67108864 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/volssd-cryptswap: 8 GiB, 8589934592 bytes, 16777216 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/volssd-crypthome: 78.8 GiB, 84544585728 bytes, 165126144 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/root: 32 GiB, 34355544064 bytes, 67100672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
/etc/fstab
# Static information about the filesystems.
# See fstab(5) for details.

# <file system> <dir> <type> <options> <dump> <pass>
# /dev/mapper/root
/dev/mapper/root	/		ext4		defaults	0 1
/dev/mapper/tmp		/tmp		tmpfs		defaults 	0 0
/dev/mapper/swap	none		swap		sw		0 0
/dev/mapper/home	/home		ext4		defaults	0 2
# /dev/sda1
UUID=7777-CD46      	/boot/efi 	vfat      	rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro	0 2
/etc/cryptab
# Configuration for encrypted block devices.
# See crypttab(5) for details.

# NOTE: Do not list your root (/) partition here, it must be set up
#       beforehand by the initramfs (/etc/mkinitcpio.conf).

# <name>       <device>                                     <password>              <options>
# home         UUID=b8ad5c18-f445-495d-9095-c9ec4f9d2f37    /etc/mypassword1
# data1        /dev/sda3                                    /etc/mypassword2
# data2        /dev/sda5                                    /etc/cryptfs.key
# swap         /dev/sdx4                                    /dev/urandom            swap,cipher=aes-cbc-essiv:sha256,size=256
# vol          /dev/sdb7                                    none
/etc/default/grub
# GRUB boot loader configuration

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX="cryptdevice=/dev/volssd/cryptroot:root root=/dev/mapper/root"
#lrwxrwxrwx 1 root root 10 Sep  7 16:44 2012f1f3-c8e6-4233-b176-39372dd1ea84 -> ../../dm-2
#lrwxrwxrwx 1 root root 10 Sep  7 16:29 2018-09-01-05-02-23-00 -> ../../sdb1
#lrwxrwxrwx 1 root root 10 Sep  7 16:32 7777-CD46 -> ../../sda1
#lrwxrwxrwx 1 root root 10 Sep  7 16:29 D3A5-D5B3 -> ../../sdb2
#lrwxrwxrwx 1 root root 10 Sep  7 16:31 bc15cb0c-eff7-4b06-b521-9539833ad1ab -> ../../dm-3
#lrwxrwxrwx 1 root root 10 Sep  7 16:29 cfd15591-196b-4dd0-ae36-e8fc3ed8c9c3 -> ../../dm-1
#lrwxrwxrwx 1 root root 10 Sep  7 16:31 f2b84f04-0178-45a4-9324-6d9c7aa65694 -> ../../dm-0
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos lvm"

# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires to
# set 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT="true"
/boot/grub/grub.cfg
# GRUB boot loader configuration

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX="cryptdevice=/dev/volssd/cryptroot:root root=/dev/mapper/root"
#lrwxrwxrwx 1 root root 10 Sep  7 16:44 2012f1f3-c8e6-4233-b176-39372dd1ea84 -> ../../dm-2
#lrwxrwxrwx 1 root root 10 Sep  7 16:29 2018-09-01-05-02-23-00 -> ../../sdb1
#lrwxrwxrwx 1 root root 10 Sep  7 16:32 7777-CD46 -> ../../sda1
#lrwxrwxrwx 1 root root 10 Sep  7 16:29 D3A5-D5B3 -> ../../sdb2
#lrwxrwxrwx 1 root root 10 Sep  7 16:31 bc15cb0c-eff7-4b06-b521-9539833ad1ab -> ../../dm-3
#lrwxrwxrwx 1 root root 10 Sep  7 16:29 cfd15591-196b-4dd0-ae36-e8fc3ed8c9c3 -> ../../dm-1
#lrwxrwxrwx 1 root root 10 Sep  7 16:31 f2b84f04-0178-45a4-9324-6d9c7aa65694 -> ../../dm-0
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos lvm"

# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires to
# set 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT="true"
➜  loki cat grub.cfg 
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
insmod lvm
if [ -s $prefix/grubenv ]; then
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod ext2
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root  bc15cb0c-eff7-4b06-b521-9539833ad1ab
else
  search --no-floppy --fs-uuid --set=root bc15cb0c-eff7-4b06-b521-9539833ad1ab
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
  set timeout_style=menu
  set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
  set timeout=5
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-bc15cb0c-eff7-4b06-b521-9539833ad1ab' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod ext2
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root  bc15cb0c-eff7-4b06-b521-9539833ad1ab
	else
	  search --no-floppy --fs-uuid --set=root bc15cb0c-eff7-4b06-b521-9539833ad1ab
	fi
	echo	'Loading Linux linux ...'
	linux	/boot/vmlinuz-linux root=UUID=bc15cb0c-eff7-4b06-b521-9539833ad1ab rw cryptdevice=/dev/volssd/cryptroot:root root=/dev/mapper/root quiet
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-linux.img
}
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-bc15cb0c-eff7-4b06-b521-9539833ad1ab' {
	menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-bc15cb0c-eff7-4b06-b521-9539833ad1ab' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod ext2
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root  bc15cb0c-eff7-4b06-b521-9539833ad1ab
		else
		  search --no-floppy --fs-uuid --set=root bc15cb0c-eff7-4b06-b521-9539833ad1ab
		fi
		echo	'Loading Linux linux ...'
		linux	/boot/vmlinuz-linux root=UUID=bc15cb0c-eff7-4b06-b521-9539833ad1ab rw cryptdevice=/dev/volssd/cryptroot:root root=/dev/mapper/root quiet
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initramfs-linux.img
	}
	menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-bc15cb0c-eff7-4b06-b521-9539833ad1ab' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod ext2
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root  bc15cb0c-eff7-4b06-b521-9539833ad1ab
		else
		  search --no-floppy --fs-uuid --set=root bc15cb0c-eff7-4b06-b521-9539833ad1ab
		fi
		echo	'Loading Linux linux ...'
		linux	/boot/vmlinuz-linux root=UUID=bc15cb0c-eff7-4b06-b521-9539833ad1ab rw cryptdevice=/dev/volssd/cryptroot:root root=/dev/mapper/root quiet
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initramfs-linux-fallback.img
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
/etc/mkinitpcio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES=(piix ide_disk reiserfs)
MODULES=(ext4)

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=()

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=()

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS=(base)
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS=(base udev autodetect block filesystems)
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS=(base udev block filesystems)
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS=(base udev block mdadm encrypt filesystems)
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS=(base udev block lvm2 filesystems)
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr, fsck and shutdown hooks.
HOOKS=(base udev autodetect keyboard keymap modconf block lvm2 encrypt filesystems fsck)

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=()

Thanks you for your help in advance !

Benoit

Last edited by benoitldr (2018-09-07 21:31:02)

Offline

#2 2018-09-07 16:19:51

Loyalty_Cham
Banned
Registered: 2018-06-19
Posts: 21

Re: grub UEFI no such device LUKS_on_LVM

Redacted

Mod edit - Please don't post links to random youtube videos.

Last edited by Slithery (2018-09-07 17:10:06)

Offline

#3 2018-09-07 17:09:05

Slithery
Forum Moderator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 3,007

Re: grub UEFI no such device LUKS_on_LVM

@benoitldr

Can you please edit your post to provide the information between [code⁣] [/code⁣] tags instead of as links, the site you are using is very likely blocked by a lot of organisations/browsers and all of the info is small enough for a forum post.

Thanks.


No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

Board footer

Powered by FluxBB