You are not logged in.

#1 2018-07-13 10:45:18

MrKebi
Member
Registered: 2016-04-12
Posts: 30

Xiaomi Notebook Pro 15" : bumblebee doesn't work

Hello Archers,


I am posting here because I need some help with my laptop installed with Archlinux and Bumblebee. I did my installation in 2018/01, everything worked it was so nice, including Optimus technology with Bumblebee.
Since the installation, I didn't used Bumblebee until today. But Bumblebee doesn't work, hey.

I read on the net, a lot of people have problems with Bumblebee and new laptops recently. I tried many things, but I can't solve this problem by myself.

My problem is, bbswitch seems to work, according to dmesg output, but after nvidia module is loaded during the boot and so bumblebee can't work. I can't block the loading of nvidia, I tried different kernel options and to blacklist nvidia module, doesn't work.



Thanks by advance ! (I will add some commands output)

Edit : some outputs :

uname -a
Linux Archlinux-NotebookPro 4.17.5-1-ARCH #1 SMP PREEMPT Sun Jul 8 17:27:31 UTC 2018 x86_64 GNU/Linux

lspci 
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
00:1c.7 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #8 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 3D controller: NVIDIA Corporation GP108M [GeForce MX150] (rev a1)
02:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961

part of dmesg 
[    2.425830] bbswitch: detected an Optimus _DSM function
[    2.425863] pci 0000:01:00.0: enabling device (0406 -> 0407)
[    2.426103] bbswitch: disabling discrete graphics
[    2.472525] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
[    9.324570] nvidia: module license 'NVIDIA' taints kernel.
[    9.324574] Disabling lock debugging due to kernel taint
[    9.359630] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[    9.854462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  396.24  Thu Apr 26 00:10:09 PDT 2018 (using threaded interrupts)

optirun firefox
[  273.791134] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[  273.791225] [ERROR]Aborting because fallback start is disabled.

 cat /var/log/Xorg.8.log
[   268.730] 
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[   268.730] Build Operating System: Linux Arch Linux
[   268.730] Current Operating System: Linux Archlinux-NotebookPro 4.17.5-1-ARCH #1 SMP PREEMPT Sun Jul 8 17:27:31 UTC 2018 x86_64
[   268.730] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=57aa6f28-a9f4-4ed3-864f-2d43ee3aa6eb rw quiet resume=/dev/nvme0n1p5 resume_offset=1925120 nmi_watchdog=0 acpi_osi=Linux i915.enable_psr=1 pcie_port_pm=off rcutree.rcu_idle_gp_delay=1
[   268.730] Build Date: 18 June 2018  03:12:37PM
[   268.730]  
[   268.730] Current version of pixman: 0.34.0
[   268.730] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[   268.730] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   268.730] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Jul 13 12:48:02 2018
[   268.731] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[   268.731] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[   268.731] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   268.731] (==) ServerLayout "Layout0"
[   268.731] (==) No screen section available. Using defaults.
[   268.731] (**) |-->Screen "Default Screen Section" (0)
[   268.731] (**) |   |-->Monitor "<default monitor>"
[   268.732] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   268.732] (**) |   |-->Device "DiscreteNvidia"
[   268.732] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   268.732] (**) Option "AutoAddDevices" "false"
[   268.732] (**) Option "AutoAddGPU" "false"
[   268.732] (**) Not automatically adding devices
[   268.732] (==) Automatically enabling devices
[   268.732] (**) Not automatically adding GPU devices
[   268.732] (==) Automatically binding GPU devices
[   268.732] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   268.732] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   268.732] 	Entry deleted from font path.
[   268.732] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[   268.732] 	Entry deleted from font path.
[   268.732] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[   268.732] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[   268.732] 	Entry deleted from font path.
[   268.732] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[   268.732] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF
[   268.732] (++) ModulePath set to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[   268.732] (==) |-->Input Device "<default pointer>"
[   268.732] (==) |-->Input Device "<default keyboard>"
[   268.732] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[   268.732] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[   268.732] (II) Module ABI versions:
[   268.732] 	X.Org ANSI C Emulation: 0.4
[   268.732] 	X.Org Video Driver: 24.0
[   268.732] 	X.Org XInput driver : 24.1
[   268.732] 	X.Org Server Extension : 10.0
[   268.734] (--) using VT number 1

[   268.734] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   268.736] (II) xfree86: Adding drm device (/dev/dri/card0)
[   268.737] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[   268.742] (--) PCI:*(1@0:0:0) 10de:1d12:1d72:1701 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128
[   268.742] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   268.742] (II) LoadModule: "glx"
[   268.743] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[   268.774] (II) Module glx: vendor="NVIDIA Corporation"
[   268.775] 	compiled for 4.0.2, module version = 1.0.0
[   268.775] 	Module class: X.Org Server Extension
[   268.775] (II) NVIDIA GLX Module  396.24  Wed Apr 25 23:17:01 PDT 2018
[   268.776] (II) LoadModule: "nvidia"
[   268.777] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   268.781] (II) Module nvidia: vendor="NVIDIA Corporation"
[   268.781] 	compiled for 4.0.2, module version = 1.0.0
[   268.781] 	Module class: X.Org Video Driver
[   268.782] (II) LoadModule: "mouse"
[   268.782] (WW) Warning, couldn't open module mouse
[   268.782] (EE) Failed to load module "mouse" (module does not exist, 0)
[   268.782] (II) LoadModule: "kbd"
[   268.783] (WW) Warning, couldn't open module kbd
[   268.783] (EE) Failed to load module "kbd" (module does not exist, 0)
[   268.783] (II) NVIDIA dlloader X Driver  396.24  Wed Apr 25 22:53:34 PDT 2018
[   268.783] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   268.784] (II) Loading sub module "fb"
[   268.784] (II) LoadModule: "fb"
[   268.784] (II) Loading /usr/lib/xorg/modules/libfb.so
[   268.785] (II) Module fb: vendor="X.Org Foundation"
[   268.785] 	compiled for 1.20.0, module version = 1.0.0
[   268.785] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   268.785] (II) Loading sub module "wfb"
[   268.785] (II) LoadModule: "wfb"
[   268.785] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   268.786] (II) Module wfb: vendor="X.Org Foundation"
[   268.786] 	compiled for 1.20.0, module version = 1.0.0
[   268.786] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   268.786] (II) Loading sub module "ramdac"
[   268.786] (II) LoadModule: "ramdac"
[   268.786] (II) Module "ramdac" already built-in
[   268.788] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   268.788] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   268.788] (==) NVIDIA(0): RGB weight 888
[   268.788] (==) NVIDIA(0): Default visual is TrueColor
[   268.788] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   268.788] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[   268.788] (**) NVIDIA(0): Option "UseEDID" "false"
[   268.788] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[   268.788] (**) NVIDIA(0): Enabling 2D acceleration
[   268.788] (**) NVIDIA(0): Ignoring EDIDs
[   268.788] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[   268.789] (**) NVIDIA(0):     mode
[   273.782] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
[   273.782] (EE) NVIDIA(GPU-0):     check your system's kernel log for additional error
[   273.782] (EE) NVIDIA(GPU-0):     messages and refer to Chapter 8: Common Problems in the
[   273.782] (EE) NVIDIA(GPU-0):     README for additional information.
[   273.782] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[   273.782] (EE) NVIDIA(0): Failing initialization of X screen 0
[   273.782] (II) UnloadModule: "nvidia"
[   273.782] (II) UnloadSubModule: "wfb"
[   273.782] (II) UnloadSubModule: "fb"
[   273.782] (EE) Screen(s) found, but none have a usable configuration.
[   273.782] (EE) 
Fatal server error:
[   273.782] (EE) no screens found(EE) 
[   273.782] (EE) 
Please consult the The X.Org Foundation support 
	 at [url]http://wiki.x.org[/url]
 for help. 
[   273.782] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[   273.782] (EE) 
[   273.782] (EE) Server terminated with error (1). Closing log file.

Last edited by MrKebi (2018-07-13 10:49:43)


Xiaomi Notebook Pro i5-8250u 8Go 256Go : Archlinux/Plasma

Offline

#2 2018-07-16 03:26:10

i_love_r34
Member
From: Mexico
Registered: 2016-02-14
Posts: 86

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

What is the output when you force the unload of the nvidia module?

Offline

#3 2018-07-16 19:19:50

MrKebi
Member
Registered: 2016-04-12
Posts: 30

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

Thanks for your answer.

sudo rmmod nvidia
rmmod: ERROR: Module nvidia is in use

The output of modules loaded after the Plasma loading :

lsmod | egrep nvidia
nvidia              14045184  3
ipmi_msghandler        57344  2 ipmi_devintf,nvidia

Last edited by MrKebi (2018-07-16 19:20:57)


Xiaomi Notebook Pro i5-8250u 8Go 256Go : Archlinux/Plasma

Offline

#4 2018-07-16 20:35:45

i_love_r34
Member
From: Mexico
Registered: 2016-02-14
Posts: 86

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

Well, the presence of IPMI is strange, do you use the IPMI modules? Maybe that force the load of nvidia module.
Can you please add the full dmesg output?

Offline

#5 2018-07-16 20:42:14

MrKebi
Member
Registered: 2016-04-12
Posts: 30

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

In fact I will be honest, I don't know what are the IPMI modules. I tried to unload them because I would to unload the nvidia module but it didn't work.

Edit : the full dmesg output, I already checked and I didn't see something weird except errors caused by my touchpad (sorry for my english, I am not a native speaker).

dmesg
[    0.000000] microcode: microcode updated early to revision 0x84, date = 2018-01-21
[    0.000000] Linux version 4.17.5-1-ARCH (builduser@heftig-19059) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Sun Jul 8 17:27:31 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=57aa6f28-a9f4-4ed3-864f-2d43ee3aa6eb rw quiet resume=/dev/nvme0n1p5 resume_offset=1925120 pcie_port_pm=off nmi_watchdog=0 acpi_osi=Linux i915.enable_psr=1 rcutree.rcu_idle_gp_delay=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007188afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007188b000-0x000000007188bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007188c000-0x000000007188cfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007188d000-0x0000000073a67fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000073a68000-0x0000000074367fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000074368000-0x000000008a57dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008a57e000-0x000000008a77dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008a77e000-0x000000008af7dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008af7e000-0x000000008cf7dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008cf7e000-0x000000008cffdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008cffe000-0x000000008cffefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008cfff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x8cffd014  SMBIOS=0x8a7f2000  SMBIOS 3.0=0x8a7f0000  ESRT=0x8a7ee018  MEMATTR=0x7a6d2018 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Timi TM1701/TM1701, BIOS XMAKB5R0P0300 09/18/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 base 008E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 008D800000 mask 7FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x8cfff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000008a7ee018 to 0x000000008a7ee078.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1c2660000, 0x1c2660fff] PGTABLE
[    0.000000] BRK [0x1c2661000, 0x1c2661fff] PGTABLE
[    0.000000] BRK [0x1c2662000, 0x1c2662fff] PGTABLE
[    0.000000] BRK [0x1c2663000, 0x1c2663fff] PGTABLE
[    0.000000] BRK [0x1c2664000, 0x1c2664fff] PGTABLE
[    0.000000] BRK [0x1c2665000, 0x1c2665fff] PGTABLE
[    0.000000] BRK [0x1c2666000, 0x1c2666fff] PGTABLE
[    0.000000] BRK [0x1c2667000, 0x1c2667fff] PGTABLE
[    0.000000] BRK [0x1c2668000, 0x1c2668fff] PGTABLE
[    0.000000] BRK [0x1c2669000, 0x1c2669fff] PGTABLE
[    0.000000] BRK [0x1c266a000, 0x1c266afff] PGTABLE
[    0.000000] BRK [0x1c266b000, 0x1c266bfff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x3586d000-0x36c2dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000008CFFD014 000024 (v02 XMCC  )
[    0.000000] ACPI: XSDT 0x000000008CFC1188 00011C (v01 XMCC   XMCC1701 00000000      01000013)
[    0.000000] ACPI: FACP 0x000000008CFEE000 00010C (v05 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000008CFC7000 023ACF (v02 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000008CF57000 000040
[    0.000000] ACPI: UEFI 0x000000008CFFC000 000236 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000008CFFB000 000042 (v01 XMCC   XMCC1701 00000002 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000008CFFA000 000055 (v03 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFF9000 0004C3 (v02 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFF8000 000046 (v02 XMCC   XMCC1701 00003000 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000008CFF7000 000034 (v03 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFF3000 003110 (v02 XMCC   XMCC1701 00003000 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000008CFF2000 0000A5 (v32 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000008CFF1000 000034 (v07 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000008CFF0000 000028 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000008CFEF000 000034 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000008CFED000 000038 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000008CFEC000 00012C (v03 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000008CFEB000 00003C (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFC6000 000517 (v02 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFC5000 0007A0 (v02 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000008CFC4000 000094 (v01 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: WSMT 0x000000008CFC3000 000028 (v01 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFC2000 00029F (v02 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFC0000 000346 (v01 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFBC000 003002 (v02 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFBB000 00051E (v02 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000008CFBA000 000034 (v01 XMCC   XMCC1701 00000002 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x000000008CFB9000 000054 (v00 XMCC   XMCC1701 00000002 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFB8000 000B10 (v02 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFB6000 0017AE (v02 XMCC   XMCC1701 00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFB2000 0038A2 (v01 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000008CFB1000 0000F0 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000008CFB0000 000044 (v01 XMCC   XMCC1701 00000002 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000008CFAF000 000038 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26effc000-0x26effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007188afff]
[    0.000000]   node   0: [mem 0x000000007188d000-0x0000000073a67fff]
[    0.000000]   node   0: [mem 0x0000000074368000-0x000000008a57dfff]
[    0.000000]   node   0: [mem 0x000000008cffe000-0x000000008cffefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[    0.000000] On node 0 totalpages: 2067481
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8754 pages used for memmap
[    0.000000]   DMA32 zone: 560253 pages, LIFO batch:31
[    0.000000]   Normal zone: 23488 pages used for memmap
[    0.000000]   Normal zone: 1503232 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 25575 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7188b000-0x7188bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7188c000-0x7188cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x73a68000-0x74367fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8a57e000-0x8a77dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8a77e000-0x8af7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8af7e000-0x8cf7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8cf7e000-0x8cffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8cfff000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2035153
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=57aa6f28-a9f4-4ed3-864f-2d43ee3aa6eb rw quiet resume=/dev/nvme0n1p5 resume_offset=1925120 pcie_port_pm=off nmi_watchdog=0 acpi_osi=Linux i915.enable_psr=1 rcutree.rcu_idle_gp_delay=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7978492K/8269924K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 291432K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 32655 entries in 128 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] DMAR: Host address width 39
[    0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.003333] DMAR: RMRR base: 0x0000008ae55000 end: 0x0000008ae74fff
[    0.003333] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[    0.003333] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.003333] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.003333] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.003333] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.003333] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.003333] x2apic enabled
[    0.003333] Switched APIC routing to cluster x2apic.
[    0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.023333] tsc: Detected 1800.000 MHz processor
[    0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[    0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3601.00 BogoMIPS (lpj=6000000)
[    0.023333] pid_max: default: 32768 minimum: 301
[    0.023333] Security Framework initialized
[    0.023333] Yama: becoming mindful.
[    0.027110] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.027824] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.027874] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.027907] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028211] CPU: Physical Processor ID: 0
[    0.028212] CPU: Processor Core ID: 0
[    0.028220] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028220] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028230] mce: CPU supports 10 MCE banks
[    0.028245] CPU0: Thermal monitoring enabled (TM1)
[    0.028279] process: using mwait in idle threads
[    0.028282] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.028283] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.028286] Spectre V2 : Mitigation: Full generic retpoline
[    0.028287] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.028288] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.028288] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.028289] Speculative Store Bypass: Vulnerable
[    0.034609] Freeing SMP alternatives memory: 28K
[    0.038813] TSC deadline timer enabled
[    0.038820] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[    0.053371] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.053443] ... version:                4
[    0.053444] ... bit width:              48
[    0.053445] ... generic registers:      4
[    0.053446] ... value mask:             0000ffffffffffff
[    0.053447] ... max period:             00007fffffffffff
[    0.053448] ... fixed-purpose events:   3
[    0.053449] ... event mask:             000000070000000f
[    0.056699] Hierarchical SRCU implementation.
[    0.070065] smp: Bringing up secondary CPUs ...
[    0.093404] x86: Booting SMP configuration:
[    0.093405] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.237304] smp: Brought up 1 node, 8 CPUs
[    0.237304] smpboot: Max logical packages: 1
[    0.237304] smpboot: Total of 8 processors activated (28811.00 BogoMIPS)
[    0.240445] devtmpfs: initialized
[    0.240445] x86/mm: Memory block size: 128MB
[    0.241053] PM: Registering ACPI NVS region [mem 0x7188b000-0x7188bfff] (4096 bytes)
[    0.241053] PM: Registering ACPI NVS region [mem 0x8af7e000-0x8cf7dfff] (33554432 bytes)
[    0.241053] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.241053] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.241053] pinctrl core: initialized pinctrl subsystem
[    0.241053] RTC time: 20:43:41, date: 07/16/18
[    0.241053] NET: Registered protocol family 16
[    0.241053] cpuidle: using governor ladder
[    0.241053] cpuidle: using governor menu
[    0.243354] Simple Boot Flag at 0x44 set to 0x1
[    0.243385] ACPI: bus type PCI registered
[    0.243387] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.243478] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.243505] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.243505] PCI: Using configuration type 1 for base access
[    0.244894] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.244894] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.244894] ACPI: Added _OSI(Module Device)
[    0.244894] ACPI: Added _OSI(Processor Device)
[    0.244894] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.244894] ACPI: Added _OSI(Processor Aggregator Device)
[    0.244894] ACPI: Added _OSI(Linux-Dell-Video)
[    0.244894] ACPI: Added _OSI(Linux)
[    0.309944] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.321879] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query honored via cmdline
[    0.330511] ACPI: Dynamic OEM Table Load:
[    0.330536] ACPI: SSDT 0xFFFF8DF364B09800 00058B (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.331441] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[    0.333256] ACPI: Dynamic OEM Table Load:
[    0.333270] ACPI: SSDT 0xFFFF8DF364AB2800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.334872] ACPI: Dynamic OEM Table Load:
[    0.334887] ACPI: SSDT 0xFFFF8DF364AE2000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.337089] ACPI: Dynamic OEM Table Load:
[    0.337101] ACPI: SSDT 0xFFFF8DF364AB1400 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.343323] ACPI: Interpreter enabled
[    0.343410] ACPI: (supports S0 S3 S4 S5)
[    0.343412] ACPI: Using IOAPIC for interrupt routing
[    0.343477] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.344475] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.355958] ACPI: Power Resource [PC01] (on)
[    0.360882] ACPI: Power Resource [WRST] (on)
[    0.379669] ACPI: Power Resource [FN00] (on)
[    0.381985] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.381994] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.386482] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.390046] PCI host bridge to bus 0000:00
[    0.390050] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.390053] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.390055] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.390057] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.390059] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.390061] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.390063] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.390065] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.390067] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.390070] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.390072] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.390074] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.390076] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.390078] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.390080] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.390082] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.390084] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.390086] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.390090] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.390104] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[    0.391531] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[    0.391551] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb2ffffff 64bit]
[    0.391561] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.391568] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.391593] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.393046] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.393070] pci 0000:00:08.0: reg 0x10: [mem 0xb4228000-0xb4228fff 64bit]
[    0.394539] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.394568] pci 0000:00:14.0: reg 0x10: [mem 0xb4210000-0xb421ffff 64bit]
[    0.394654] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.396211] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.396240] pci 0000:00:14.2: reg 0x10: [mem 0xb4229000-0xb4229fff 64bit]
[    0.397801] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.398065] pci 0000:00:15.0: reg 0x10: [mem 0xb422a000-0xb422afff 64bit]
[    0.400407] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.400671] pci 0000:00:15.1: reg 0x10: [mem 0xb422b000-0xb422bfff 64bit]
[    0.402944] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.402977] pci 0000:00:16.0: reg 0x10: [mem 0xb422c000-0xb422cfff 64bit]
[    0.403068] pci 0000:00:16.0: PME# supported from D3hot
[    0.404613] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.404709] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.406248] pci 0000:00:1c.7: [8086:9d17] type 01 class 0x060400
[    0.406357] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.407876] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.407968] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.409507] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.411072] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.411093] pci 0000:00:1f.2: reg 0x10: [mem 0xb4224000-0xb4227fff]
[    0.412595] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.412631] pci 0000:00:1f.3: reg 0x10: [mem 0xb4220000-0xb4223fff 64bit]
[    0.412671] pci 0000:00:1f.3: reg 0x20: [mem 0xb4200000-0xb420ffff 64bit]
[    0.412734] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.414346] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.414409] pci 0000:00:1f.4: reg 0x10: [mem 0xb422d000-0xb422d0ff 64bit]
[    0.414482] pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]
[    0.416059] pci 0000:01:00.0: [10de:1d12] type 00 class 0x030200
[    0.416090] pci 0000:01:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
[    0.416106] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.416122] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[    0.416133] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.416144] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.416390] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.416395] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.416399] pci 0000:00:1c.0:   bridge window [mem 0xb3000000-0xb3ffffff]
[    0.416405] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[    0.417030] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
[    0.417186] pci 0000:02:00.0: reg 0x10: [mem 0xb4100000-0xb4101fff 64bit]
[    0.417732] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.418479] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.418486] pci 0000:00:1c.7:   bridge window [mem 0xb4100000-0xb41fffff]
[    0.418566] pci 0000:03:00.0: [144d:a804] type 00 class 0x010802
[    0.418601] pci 0000:03:00.0: reg 0x10: [mem 0xb4000000-0xb4003fff 64bit]
[    0.418856] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.418862] pci 0000:00:1d.0:   bridge window [mem 0xb4000000-0xb40fffff]
[    0.421033] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.421100] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.421203] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.421306] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.421408] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.421510] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.421612] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.421714] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.423763] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.423763] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.423763] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.423763] vgaarb: loaded
[    0.423763] pps_core: LinuxPPS API ver. 1 registered
[    0.423763] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.423763] PTP clock support registered
[    0.423763] EDAC MC: Ver: 3.0.0
[    0.423936] Registered efivars operations
[    0.489114] PCI: Using ACPI for IRQ routing
[    0.517859] PCI: pci_cache_line_size set to 64 bytes
[    0.518447] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.518449] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.518451] e820: reserve RAM buffer [mem 0x7188b000-0x73ffffff]
[    0.518452] e820: reserve RAM buffer [mem 0x73a68000-0x73ffffff]
[    0.518454] e820: reserve RAM buffer [mem 0x8a57e000-0x8bffffff]
[    0.518456] e820: reserve RAM buffer [mem 0x8cfff000-0x8fffffff]
[    0.518457] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[    0.518592] NetLabel: Initializing
[    0.518593] NetLabel:  domain hash size = 128
[    0.518594] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.518613] NetLabel:  unlabeled traffic allowed by default
[    0.518618] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.518618] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.521048] clocksource: Switched to clocksource tsc-early
[    0.535186] VFS: Disk quotas dquot_6.6.0
[    0.535209] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.535301] pnp: PnP ACPI init
[    0.535632] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.535635] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.535638] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.535640] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.535643] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.535645] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.535648] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.535655] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.536196] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.536202] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.536622] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.536625] system 00:02: [io  0xffff] has been reserved
[    0.536628] system 00:02: [io  0xffff] has been reserved
[    0.536630] system 00:02: [io  0xffff] has been reserved
[    0.536632] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.536635] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.536641] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.536829] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.536891] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.536896] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.536963] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.537036] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 (active)
[    0.539220] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.540192] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.540194] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.540197] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.540199] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.540202] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.540205] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.540207] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.540210] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.540212] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.540215] system 00:08: [mem 0x90000000-0x9001ffff] has been reserved
[    0.540221] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.540819] pnp: PnP ACPI: found 9 devices
[    0.547097] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.547103] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.547136] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.547139] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.547141] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.547145] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.547150] pci 0000:00:1c.0:   bridge window [mem 0xb3000000-0xb3ffffff]
[    0.547154] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[    0.547160] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.547167] pci 0000:00:1c.7:   bridge window [mem 0xb4100000-0xb41fffff]
[    0.547175] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.547181] pci 0000:00:1d.0:   bridge window [mem 0xb4000000-0xb40fffff]
[    0.547190] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.547192] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.547195] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.547197] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.547199] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.547201] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.547203] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.547205] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.547207] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.547209] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.547211] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.547214] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.547216] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.547218] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.547220] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.547222] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.547224] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window]
[    0.547227] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.547229] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.547231] pci_bus 0000:01: resource 1 [mem 0xb3000000-0xb3ffffff]
[    0.547233] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[    0.547235] pci_bus 0000:02: resource 1 [mem 0xb4100000-0xb41fffff]
[    0.547238] pci_bus 0000:03: resource 1 [mem 0xb4000000-0xb40fffff]
[    0.547515] NET: Registered protocol family 2
[    0.547705] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.547756] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.547903] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.548045] TCP: Hash tables configured (established 65536 bind 65536)
[    0.548089] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.548119] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.548197] NET: Registered protocol family 1
[    0.548215] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.550414] PCI: CLS 64 bytes, default 64
[    0.550459] Unpacking initramfs...
[    0.938174] Freeing initrd memory: 20228K
[    0.938228] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:15.0
[    0.938233] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.1
[    0.938268] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.938271] software IO TLB [mem 0x85975000-0x89975000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.938333] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[    0.938364] clocksource: Switched to clocksource tsc
[    0.938548] Scanning for low memory corruption every 60 seconds
[    0.939375] Initialise system trusted keyrings
[    0.939388] Key type blacklist registered
[    0.939453] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.941214] zbud: loaded
[    0.941706] pstore: using lz4hc compression
[    0.943097] Key type asymmetric registered
[    0.943099] Asymmetric key parser 'x509' registered
[    0.943146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.943207] io scheduler noop registered
[    0.943208] io scheduler deadline registered
[    0.943265] io scheduler cfq registered (default)
[    0.943267] io scheduler mq-deadline registered
[    0.943268] io scheduler kyber registered
[    0.943276] io scheduler bfq registered
[    0.944561] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[    0.944590] pcieport 0000:00:1c.7: AER enabled with IRQ 123
[    0.944614] pcieport 0000:00:1d.0: AER enabled with IRQ 124
[    0.944632] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    0.944656] pcieport 0000:00:1c.7: Signaling PME with IRQ 123
[    0.944670] pcieport 0000:00:1d.0: Signaling PME with IRQ 124
[    0.944769] efifb: probing for efifb
[    0.944788] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[    0.944789] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.944790] efifb: scrolling: redraw
[    0.944793] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.950830] Console: switching to colour frame buffer device 240x67
[    0.956710] fb0: EFI VGA frame buffer device
[    0.956723] intel_idle: MWAIT substates: 0x11142120
[    0.956724] intel_idle: v0.4.1 model 0x8E
[    0.957303] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.957372] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C0C:00/input/input0
[    0.957447] ACPI: Power Button [PWRB]
[    0.957514] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C0D:00/input/input1
[    0.957529] ACPI: Lid Switch [LID0]
[    0.957614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.957625] ACPI: Power Button [PWRF]
[    0.962169] thermal LNXTHERM:00: registered as thermal_zone0
[    0.962171] ACPI: Thermal Zone [TZ01] (43 C)
[    0.962465] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.965106] nvme nvme0: pci function 0000:03:00.0
[    0.965189] intel_pstate: Intel P-state driver initializing
[    0.965783] intel_pstate: HWP enabled
[    0.966095] ledtrig-cpu: registered to indicate activity on CPUs
[    0.966153] intel_pmc_core:  initialized
[    0.966475] NET: Registered protocol family 10
[    0.972537] Segment Routing with IPv6
[    0.972564] NET: Registered protocol family 17
[    0.973810] RAS: Correctable Errors collector initialized.
[    0.973896] microcode: sig=0x806ea, pf=0x80, revision=0x84
[    0.974245] microcode: Microcode Update Driver: v2.2.
[    0.974261] sched_clock: Marking stable (974233210, 0)->(968561071, 5672139)
[    0.974634] registered taskstats version 1
[    0.974644] Loading compiled-in X.509 certificates
[    0.974669] zswap: loaded using pool lzo/zbud
[    0.979540] Key type big_key registered
[    0.981372]   Magic number: 10:16:751
[    0.981384] tty ttyS2: hash matches
[    0.981460] hctosys: unable to open rtc device (rtc0)
[    1.138640] Freeing unused kernel memory: 1476K
[    1.138642] Write protecting the kernel read-only data: 16384k
[    1.139611] Freeing unused kernel memory: 2016K
[    1.140443] Freeing unused kernel memory: 608K
[    1.198187]  nvme0n1: p1 p2 p3 p4 p5 p6 p7
[    1.210252] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    1.227431] systemd[1]: Detected architecture x86-64.
[    1.227435] systemd[1]: Running in initial RAM disk.
[    1.231034] random: systemd: uninitialized urandom read (16 bytes read)
[    1.231039] systemd[1]: Initializing machine ID from random generator.
[    1.240859] random: systemd: uninitialized urandom read (16 bytes read)
[    1.240869] systemd[1]: Reached target Timers.
[    1.240898] random: systemd: uninitialized urandom read (16 bytes read)
[    1.240903] systemd[1]: Reached target Swap.
[    1.241762] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
[    1.241836] systemd[1]: Listening on Journal Socket.
[    1.241847] systemd[1]: Reached target Slices.
[    1.242297] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.246586] Linux agpgart interface v0.103
[    1.285863] Setting dangerous option enable_guc - tainting kernel
[    1.285871] Setting dangerous option enable_psr - tainting kernel
[    1.285872] Setting dangerous option disable_power_well - tainting kernel
[    1.285873] Setting dangerous option enable_psr - tainting kernel
[    1.286392] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.286752] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[    1.286753] fb: switching to inteldrmfb from EFI VGA
[    1.286769] Console: switching to colour dummy device 80x25
[    1.286831] [drm] Replacing VGA console driver
[    1.288147] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.288148] [drm] Driver supports precise vblank timestamp query.
[    1.288687] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.289569] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.289604] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.290228] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.294486] ACPI: bus type USB registered
[    1.294509] usbcore: registered new interface driver usbfs
[    1.294517] usbcore: registered new interface driver hub
[    1.294544] usbcore: registered new device driver usb
[    1.302576] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0)
[    1.313393] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_39.bin (version 9.39)
[    1.322309] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.322826] i915 0000:00:02.0: GuC firmware version 9.39
[    1.322827] i915 0000:00:02.0: GuC submission enabled
[    1.322828] i915 0000:00:02.0: HuC enabled
[    1.324180] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[    1.325738] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.326084] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    1.326154] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[    1.326163] ACPI: Video Device [PXSX] (multi-head: yes  rom: yes  post: no)
[    1.326185] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:34/LNXVIDEO:01/input/input6
[    1.326371] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.326377] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.327585] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.327609] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.327944] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    1.327945] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.327946] usb usb1: Product: xHCI Host Controller
[    1.327947] usb usb1: Manufacturer: Linux 4.17.5-1-ARCH xhci-hcd
[    1.327948] usb usb1: SerialNumber: 0000:00:14.0
[    1.328039] hub 1-0:1.0: USB hub found
[    1.328100] hub 1-0:1.0: 12 ports detected
[    1.328777] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.328780] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.328782] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.328824] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    1.328825] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.328826] usb usb2: Product: xHCI Host Controller
[    1.328827] usb usb2: Manufacturer: Linux 4.17.5-1-ARCH xhci-hcd
[    1.328828] usb usb2: SerialNumber: 0000:00:14.0
[    1.328900] hub 2-0:1.0: USB hub found
[    1.328928] hub 2-0:1.0: 6 ports detected
[    1.329097] usb: port power management may be unreliable
[    1.360686] PM: Image not found (code -22)
[    1.395351] random: fast init done
[    1.398442] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[    1.441801] fbcon: inteldrmfb (fb0) is primary device
[    1.660240] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.802318] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[    1.802323] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.927085] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    2.075560] usb 1-6: New USB device found, idVendor=04f2, idProduct=b59a, bcdDevice=34.04
[    2.075565] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.075568] usb 1-6: Product: XiaoMi USB 2.0 Webcam
[    2.075572] usb 1-6: Manufacturer: Chicony
[    2.200269] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    2.340928] usb 1-7: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    2.340934] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.340937] usb 1-7: Product: USB2.0-CRW
[    2.340940] usb 1-7: Manufacturer: Generic
[    2.340943] usb 1-7: SerialNumber: 20100201396000000
[    2.347458] usbcore: registered new interface driver rtsx_usb
[    2.463482] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    2.543581] Console: switching to colour frame buffer device 240x67
[    2.569984] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.584533] bbswitch: loading out-of-tree module taints kernel.
[    2.585494] bbswitch: version 0.8
[    2.585508] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    2.585521] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.RP01.PXSX
[    2.585550] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180313/nsarguments-66)
[    2.585935] bbswitch: detected an Optimus _DSM function
[    2.585969] pci 0000:01:00.0: enabling device (0406 -> 0407)
[    2.586186] bbswitch: disabling discrete graphics
[    2.611502] usb 1-8: New USB device found, idVendor=04f3, idProduct=0c1a, bcdDevice= 1.42
[    2.611504] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.611506] usb 1-8: Product: ELAN:Fingerprint
[    2.611507] usb 1-8: Manufacturer: ELAN
[    2.630814] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
[    2.725976] systemd-journald[163]: Received SIGTERM from PID 1 (systemd).
[    2.743592] systemd: 12 output lines suppressed due to ratelimiting
[    2.835096] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    2.850800] systemd[1]: Detected architecture x86-64.
[    2.853164] systemd[1]: Set hostname to <Archlinux-NotebookPro>.
[    2.993635] systemd[1]: Stopped Switch Root.
[    2.993711] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[    2.993748] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    2.993755] systemd[1]: Stopped Journal Service.
[    2.996655] systemd[1]: Starting Journal Service...
[    2.997537] systemd[1]: Starting Load Kernel Modules...
[    3.000028] systemd[1]: Listening on RPCbind Server Activation Socket.
[    3.029350] systemd-journald[267]: Received request to flush runtime journal from PID 1
[    3.029727] vboxdrv: Found 8 processor cores
[    3.046834] vboxdrv: TSC mode is Invariant, tentative frequency 1799988554 Hz
[    3.046836] vboxdrv: Successfully loaded version 5.2.14 (interface 0x00290001)
[    3.048795] VBoxPciLinuxInit
[    3.048799] vboxpci: IOMMU not found (not registered)
[    3.049514] VBoxNetAdp: Successfully started.
[    3.051191] VBoxNetFlt: Successfully started.
[    3.186388] Adding 8290300k swap on /swapfile.  Priority:-2 extents:7 across:10092540k SSFS
[    3.342313] ACPI: AC Adapter [ADP0] (off-line)
[    3.344085] ACPI: Battery Slot [BAT0] (battery present)
[    3.345355] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    3.345357] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    3.345359] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    3.345361] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    3.365660] rtc_cmos 00:03: RTC can wake from S4
[    3.366139] rtc_cmos 00:03: registered as rtc0
[    3.366158] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.368743] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    3.368786] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    3.394710] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.395043] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    3.397704] hidraw: raw HID events driver (C) Jiri Kosina
[    3.400735] random: crng init done
[    3.400736] random: 7 urandom warning(s) missed due to ratelimiting
[    3.404276] media: Linux media interface: v0.10
[    3.404860] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.404861] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.404862] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.404863] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.404864] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.404864] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.409376] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[    3.416146] cryptd: max_cpu_qlen set to 1000
[    3.418021] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    3.418468] acpi INT33D5:00: intel-hid: created platform device
[    3.440291] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[    3.449169] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.453542] AVX2 version of gcm_enc/dec engaged.
[    3.453544] AES CTR mode by8 optimization enabled
[    3.457978] Bluetooth: Core ver 2.22
[    3.457996] NET: Registered protocol family 31
[    3.457997] Bluetooth: HCI device and connection manager initialized
[    3.458000] Bluetooth: HCI socket layer initialized
[    3.458002] Bluetooth: L2CAP socket layer initialized
[    3.458008] Bluetooth: SCO socket layer initialized
[    3.462403] Linux video capture interface: v2.00
[    3.469276] usbcore: registered new interface driver btusb
[    3.469629] Bluetooth: hci0: Firmware revision 0.1 build 226 week 17 2018
[    3.479314] uvcvideo: Found UVC 1.00 device XiaoMi USB 2.0 Webcam (04f2:b59a)
[    3.501575] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    3.501578] uvcvideo 1-6:1.0: Entity type for entity Extension 3 was not initialized!
[    3.501580] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    3.501581] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    3.501659] input: XiaoMi USB 2.0 Webcam: XiaoMi U as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input9
[    3.501725] usbcore: registered new interface driver uvcvideo
[    3.501725] USB Video Class driver (1.1.1)
[    3.523289] iTCO_vendor_support: vendor-support=0
[    3.525111] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.525185] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    3.525292] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.531759] intel_rapl: Found RAPL domain package
[    3.531761] intel_rapl: Found RAPL domain core
[    3.531762] intel_rapl: Found RAPL domain uncore
[    3.531763] intel_rapl: Found RAPL domain dram
[    3.534788] input: Intel HID events as /devices/pci0000:00/0000:00:1f.0/INT33D5:00/input/input10
[    3.534847] i2c_hid i2c-ETD2303:00: i2c-ETD2303:00 supply vdd not found, using dummy regulator
[    3.554614] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    3.554827] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    3.557519] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.557685] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.581910] input: ETD2303:00 04F3:3083 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-ETD2303:00/0018:04F3:3083.0001/input/input11
[    3.581976] hid-generic 0018:04F3:3083.0001: input,hidraw0: I2C HID v1.00 Mouse [ETD2303:00 04F3:3083] on i2c-ETD2303:00
[    3.598494] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    3.598496] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.598498] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.598499] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.598500] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.598501] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[    3.613639] input: ETD2303:00 04F3:3083 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-ETD2303:00/0018:04F3:3083.0001/input/input14
[    3.613748] hid-multitouch 0018:04F3:3083.0001: input,hidraw0: I2C HID v1.00 Mouse [ETD2303:00 04F3:3083] on i2c-ETD2303:00
[    3.616870] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.618611] mousedev: PS/2 mouse device common for all mice
[    3.618703] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.619218] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.619220] cfg80211: failed to load regulatory.db
[    3.635033] Intel(R) Wireless WiFi driver for Linux
[    3.635034] Copyright(c) 2003- 2015 Intel Corporation
[    3.641483] iwlwifi 0000:02:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm
[    3.650507] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    3.650543] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    3.650575] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    3.650605] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    3.650635] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    3.650663] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    3.698896] fuse init (API version 7.26)
[    3.712387] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[    3.776981] iwlwifi 0000:02:00.0: base HW address: f8:94:c2:ed:67:7d
[    3.861497] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.862447] thermal thermal_zone3: failed to read out thermal zone (-61)
[    3.869809] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    3.930119] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4d1f01)
[    3.940862] psmouse serio1: elantech: Synaptics capabilities query result 0x30, 0x1a, 0x11.
[    3.947910] RPC: Registered named UNIX socket transport module.
[    3.947912] RPC: Registered udp transport module.
[    3.947914] RPC: Registered tcp transport module.
[    3.947915] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.951740] psmouse serio1: elantech: Elan sample query result 03, 7d, 75
[    4.008017] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[    4.085526] zram: Added device: zram0
[    4.085639] zram: Added device: zram1
[    4.085742] zram: Added device: zram2
[    4.085842] zram: Added device: zram3
[    4.085945] zram: Added device: zram4
[    4.086052] zram: Added device: zram5
[    4.086151] zram: Added device: zram6
[    4.086229] zram: Added device: zram7
[    4.093428] zram0: detected capacity change from 0 to 206143488
[    4.102037] zram1: detected capacity change from 0 to 206143488
[    4.105610] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.105612] Bluetooth: BNEP filters: protocol multicast
[    4.105615] Bluetooth: BNEP socket layer initialized
[    4.118511] zram2: detected capacity change from 0 to 206143488
[    4.124323] zram3: detected capacity change from 0 to 206143488
[    4.130205] zram4: detected capacity change from 0 to 206143488
[    4.138065] zram5: detected capacity change from 0 to 206143488
[    4.145947] zram6: detected capacity change from 0 to 206143488
[    4.156175] zram7: detected capacity change from 0 to 206143488
[    4.170836] Adding 201308k swap on /dev/zram0.  Priority:100 extents:1 across:201308k SSFS
[    4.170960] Adding 201308k swap on /dev/zram1.  Priority:100 extents:1 across:201308k SSFS
[    4.171074] Adding 201308k swap on /dev/zram2.  Priority:100 extents:1 across:201308k SSFS
[    4.171504] Adding 201308k swap on /dev/zram3.  Priority:100 extents:1 across:201308k SSFS
[    4.171616] Adding 201308k swap on /dev/zram4.  Priority:100 extents:1 across:201308k SSFS
[    4.171731] Adding 201308k swap on /dev/zram5.  Priority:100 extents:1 across:201308k SSFS
[    4.171841] Adding 201308k swap on /dev/zram6.  Priority:100 extents:1 across:201308k SSFS
[    4.171949] Adding 201308k swap on /dev/zram7.  Priority:100 extents:1 across:201308k SSFS
[    4.283474] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    6.674233] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    7.536168] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    8.642711] ipmi message handler version 39.2
[    8.643889] ipmi device interface
[    8.734175] nvidia: module license 'NVIDIA' taints kernel.
[    8.734176] Disabling lock debugging due to kernel taint
[    8.746951] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[    9.240316] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  396.24  Thu Apr 26 00:10:09 PDT 2018 (using threaded interrupts)
[   10.955511] wlp2s0: authenticate with e0:1c:41:ac:61:68
[   10.965671] wlp2s0: send auth to e0:1c:41:ac:61:68 (try 1/3)
[   10.971258] wlp2s0: authenticated
[   10.973403] wlp2s0: associate with e0:1c:41:ac:61:68 (try 1/3)
[   10.974765] wlp2s0: RX AssocResp from e0:1c:41:ac:61:68 (capab=0x401 status=0 aid=1)
[   10.976804] wlp2s0: associated
[   10.977535] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   11.050519] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e0:1c:41:ac:61:68
[   15.033806] Bluetooth: RFCOMM TTY layer initialized
[   15.033813] Bluetooth: RFCOMM socket layer initialized
[   15.033818] Bluetooth: RFCOMM ver 1.11

I also checked, my nvidia gpu is ON so after the boot and without tried to use Bumblebee, it can be explain by the loading of the nvidia module and it could explain why my Bumblebee setup doesn't work I guess ?

cat /proc/acpi/bbswitch
0000:01:00.0 ON

Last edited by MrKebi (2018-07-16 20:58:25)


Xiaomi Notebook Pro i5-8250u 8Go 256Go : Archlinux/Plasma

Offline

#6 2018-07-16 21:02:09

i_love_r34
Member
From: Mexico
Registered: 2016-02-14
Posts: 86

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

The IPMI is like a tool who can "monitor" the host OS.
In the dmesg I see that IPMI indeed start the nvidia module, that's strange but try to force the blacklist the IPMI modules in /etc/modprobe.d with:

install ipmi_si /bin/false
install ipmi_devintf /bin/false
install ipmi_msghandler /bin/false

Restart and see if bumblebee work.

Offline

#7 2018-07-16 21:31:32

MrKebi
Member
Registered: 2016-04-12
Posts: 30

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

Thanks for your answer.

I didn't understand how to use your command lines, so I tried basically to blacklist the ipmi modules :

cat /etc/modprobe.d/ipmi.conf
blacklist ipmi_si
blacklist ipmi_devintf
blacklist ipmi_msghandler

But it didn't work :

lsmod | egrep nvidia
nvidia              14045184  3
ipmi_msghandler        57344  2 ipmi_devintf,nvidia

The dmesg out is exactly the same.


Maybe the way I blacklisted the ipmi modules ? I will check if I can blacklist them with kernel options.

Edit : I tried the lines your wrote :

cat /etc/modprobe.d/ipmi.conf
install ipmi_si /bin/false
install ipmi_devintf /bin/false
install ipmi_msghandler /bin/false

Doesn't work too, nvidia and ipmi_msghandler are still loaded. I tried also to blacklist the modules with kernel option :

GRUB_CMDLINE_LINUX_DEFAULT="quiet resume=/dev/nvme0n1p5 resume_offset=1925120 pcie_port_pm=off nmi_watchdog=0 acpi_osi=Linux i915.enable_psr=1 rcutree.rcu_idle_gp_delay=1 modprobe.blacklist=ipmi_si,ipmi_deintf,ipmi_msghandler"

Doesn't work too.

Last edited by MrKebi (2018-07-16 22:08:36)


Xiaomi Notebook Pro i5-8250u 8Go 256Go : Archlinux/Plasma

Offline

#8 2018-07-16 22:26:25

i_love_r34
Member
From: Mexico
Registered: 2016-02-14
Posts: 86

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

That's so strange, can you see if the BIOS of the UEFI configuration have settings related to enable/disable of IPMI or management interfaces?

Offline

#9 2018-07-16 22:47:03

MrKebi
Member
Registered: 2016-04-12
Posts: 30

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

My BIOS is really poor, I don't have any option related to that.

Do you think a BIOS update may help ? I saw new versions for my BIOS exist.


Xiaomi Notebook Pro i5-8250u 8Go 256Go : Archlinux/Plasma

Offline

#10 2018-07-17 00:29:46

i_love_r34
Member
From: Mexico
Registered: 2016-02-14
Posts: 86

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

Maybe, but i recommend to check the bios changelog if there is any before of the bios update. At last resource I will recommend to compile the kernel without IPMI if you have enough time.

Offline

#11 2018-07-17 00:43:18

MrKebi
Member
Registered: 2016-04-12
Posts: 30

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

Ok I upgraded my BIOS; nothing changed.

I saw upgrade for nvidia and bbswitch in the repositories, I will upgrade them and test.

I will check how to recompile my kernel without ipmi. Thanks for your help !


Xiaomi Notebook Pro i5-8250u 8Go 256Go : Archlinux/Plasma

Offline

#12 2018-07-17 01:39:12

i_love_r34
Member
From: Mexico
Registered: 2016-02-14
Posts: 86

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

If you decide to compile the kernel, Only edit the config file like this

You will find in the config file this:

CONFIG_ACPI_IPMI=m

CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
# CONFIG_IPMI_PROC_INTERFACE is not set
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m

Only change to this:

# CONFIG_ACPI_IPMI is not set

# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMI_DMI_DECODE is not set
# CONFIG_IPMI_PROC_INTERFACE is not set
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
# CONFIG_IPMI_SI is not set
# CONFIG_IPMI_SSIF is not set
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set

I hope that helps.

Offline

#13 2018-07-17 12:57:58

MrKebi
Member
Registered: 2016-04-12
Posts: 30

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

Ok then I compiled the kernel, and I have a kernel panic during the boot, very early (around 0,5 seconds).

I don't know if it's due to the deletion of IPMI modules or if I missed something during the compilation or after the installation of the kernel.


Edit : I tried with stock kernel and without the kernel option "pci_aspm=force", ipmi and nvidia modules arn't loaded, but I can"t use my Bumblebee setup ;

lsmod | egrep nvidia

optirun glxgears
[  688.399195] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card

[  688.399214] [ERROR]Aborting because fallback start is disabled.

dmesg
[    0.000000] microcode: microcode updated early to revision 0x84, date = 2018-01-21
[    0.000000] Linux version 4.17.6-1-ARCH (builduser@heftig-10558) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Wed Jul 11 19:14:29 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=57aa6f28-a9f4-4ed3-864f-2d43ee3aa6eb rw quiet resume=/dev/nvme0n1p5 resume_offset=1925120 nmi_watchdog=0 acpi_osi=Linux i915.enable_psr=1 rcutree.rcu_idle_gp_delay=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007187efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007187f000-0x000000007187ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000071880000-0x0000000071880fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000071881000-0x0000000073a67fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000073a68000-0x0000000074367fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000074368000-0x000000008a57dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008a57e000-0x000000008a77dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008a77e000-0x000000008af7dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008af7e000-0x000000008cf7dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008cf7e000-0x000000008cffdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008cffe000-0x000000008cffefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008cfff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x8cffd014  SMBIOS=0x8a7f2000  SMBIOS 3.0=0x8a7f0000  ESRT=0x8a7ee018  MEMATTR=0x7a6d3018 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Timi TM1701/TM1701, BIOS XMAKB5R0P0502 10/13/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 base 008E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 008D800000 mask 7FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x8cfff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000008a7ee018 to 0x000000008a7ee078.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1e2660000, 0x1e2660fff] PGTABLE
[    0.000000] BRK [0x1e2661000, 0x1e2661fff] PGTABLE
[    0.000000] BRK [0x1e2662000, 0x1e2662fff] PGTABLE
[    0.000000] BRK [0x1e2663000, 0x1e2663fff] PGTABLE
[    0.000000] BRK [0x1e2664000, 0x1e2664fff] PGTABLE
[    0.000000] BRK [0x1e2665000, 0x1e2665fff] PGTABLE
[    0.000000] BRK [0x1e2666000, 0x1e2666fff] PGTABLE
[    0.000000] BRK [0x1e2667000, 0x1e2667fff] PGTABLE
[    0.000000] BRK [0x1e2668000, 0x1e2668fff] PGTABLE
[    0.000000] BRK [0x1e2669000, 0x1e2669fff] PGTABLE
[    0.000000] BRK [0x1e266a000, 0x1e266afff] PGTABLE
[    0.000000] BRK [0x1e266b000, 0x1e266bfff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x368dd000-0x37465fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000008CFFD014 000024 (v02 XMCC  )
[    0.000000] ACPI: XSDT 0x000000008CFC1188 00011C (v01 XMCC   XMCC1701 00000000      01000013)
[    0.000000] ACPI: FACP 0x000000008CFEE000 00010C (v05 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000008CFC7000 023AF6 (v02 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000008CF57000 000040
[    0.000000] ACPI: UEFI 0x000000008CFFC000 000236 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000008CFFB000 000042 (v01 XMCC   XMCC1701 00000002 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000008CFFA000 000055 (v03 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFF9000 0004C3 (v02 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFF8000 000046 (v02 XMCC   XMCC1701 00003000 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000008CFF7000 000034 (v03 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFF3000 003110 (v02 XMCC   XMCC1701 00003000 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000008CFF2000 0000A5 (v32 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000008CFF1000 000034 (v07 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000008CFF0000 000028 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000008CFEF000 000034 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000008CFED000 000038 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000008CFEC000 00012C (v03 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000008CFEB000 00003C (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFC6000 000517 (v02 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFC5000 0007A0 (v02 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000008CFC4000 000094 (v01 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: WSMT 0x000000008CFC3000 000028 (v01 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFC2000 00029F (v02 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFC0000 000346 (v01 XMCC   XMCC1701 00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFBC000 003002 (v02 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFBB000 00051E (v02 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000008CFBA000 000034 (v01 XMCC   XMCC1701 00000002 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x000000008CFB9000 000054 (v00 XMCC   XMCC1701 00000002 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFB8000 000B64 (v02 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFB6000 0017AE (v02 XMCC   XMCC1701 00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CFB2000 0038A2 (v01 XMCC   XMCC1701 00001000 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000008CFB1000 0000F0 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000008CFB0000 000044 (v01 XMCC   XMCC1701 00000002 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000008CFAF000 000038 (v01 XMCC   XMCC1701 00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26effc000-0x26effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007187efff]
[    0.000000]   node   0: [mem 0x0000000071881000-0x0000000073a67fff]
[    0.000000]   node   0: [mem 0x0000000074368000-0x000000008a57dfff]
[    0.000000]   node   0: [mem 0x000000008cffe000-0x000000008cffefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[    0.000000] On node 0 totalpages: 2067481
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8754 pages used for memmap
[    0.000000]   DMA32 zone: 560253 pages, LIFO batch:31
[    0.000000]   Normal zone: 23488 pages used for memmap
[    0.000000]   Normal zone: 1503232 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 25575 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7187f000-0x7187ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x71880000-0x71880fff]
[    0.000000] PM: Registered nosave memory: [mem 0x73a68000-0x74367fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8a57e000-0x8a77dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8a77e000-0x8af7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8af7e000-0x8cf7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8cf7e000-0x8cffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8cfff000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2035153
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=57aa6f28-a9f4-4ed3-864f-2d43ee3aa6eb rw quiet resume=/dev/nvme0n1p5 resume_offset=1925120 nmi_watchdog=0 acpi_osi=Linux i915.enable_psr=1 rcutree.rcu_idle_gp_delay=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7986836K/8269924K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 283088K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 32655 entries in 128 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] DMAR: Host address width 39
[    0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.003333] DMAR: RMRR base: 0x0000008ae55000 end: 0x0000008ae74fff
[    0.003333] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[    0.003333] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.003333] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.003333] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.003333] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.003333] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.003333] x2apic enabled
[    0.003333] Switched APIC routing to cluster x2apic.
[    0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.023333] tsc: Detected 1800.000 MHz processor
[    0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[    0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3601.00 BogoMIPS (lpj=6000000)
[    0.023333] pid_max: default: 32768 minimum: 301
[    0.023333] Security Framework initialized
[    0.023333] Yama: becoming mindful.
[    0.027083] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.027819] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.027858] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.027882] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028182] CPU: Physical Processor ID: 0
[    0.028183] CPU: Processor Core ID: 0
[    0.028191] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028192] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028213] mce: CPU supports 10 MCE banks
[    0.028229] CPU0: Thermal monitoring enabled (TM1)
[    0.028263] process: using mwait in idle threads
[    0.028267] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.028268] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.028270] Spectre V2 : Mitigation: Full generic retpoline
[    0.028271] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.028272] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.028273] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.028274] Speculative Store Bypass: Vulnerable
[    0.034590] Freeing SMP alternatives memory: 28K
[    0.040693] TSC deadline timer enabled
[    0.040701] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[    0.056705] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.056784] ... version:                4
[    0.056785] ... bit width:              48
[    0.056786] ... generic registers:      4
[    0.056787] ... value mask:             0000ffffffffffff
[    0.056788] ... max period:             00007fffffffffff
[    0.056789] ... fixed-purpose events:   3
[    0.056790] ... event mask:             000000070000000f
[    0.060033] Hierarchical SRCU implementation.
[    0.073381] smp: Bringing up secondary CPUs ...
[    0.096741] x86: Booting SMP configuration:
[    0.096743] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.240626] smp: Brought up 1 node, 8 CPUs
[    0.240626] smpboot: Max logical packages: 1
[    0.240626] smpboot: Total of 8 processors activated (28811.00 BogoMIPS)
[    0.243780] devtmpfs: initialized
[    0.243780] x86/mm: Memory block size: 128MB
[    0.244399] PM: Registering ACPI NVS region [mem 0x7187f000-0x7187ffff] (4096 bytes)
[    0.244399] PM: Registering ACPI NVS region [mem 0x8af7e000-0x8cf7dfff] (33554432 bytes)
[    0.244399] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.244399] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.244399] pinctrl core: initialized pinctrl subsystem
[    0.244399] RTC time: 13:13:20, date: 07/17/18
[    0.244399] NET: Registered protocol family 16
[    0.244399] cpuidle: using governor ladder
[    0.244399] cpuidle: using governor menu
[    0.246686] Simple Boot Flag at 0x44 set to 0x1
[    0.246727] ACPI: bus type PCI registered
[    0.246729] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.246821] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.246830] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.246830] PCI: Using configuration type 1 for base access
[    0.248221] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.248221] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.248221] ACPI: Added _OSI(Module Device)
[    0.248221] ACPI: Added _OSI(Processor Device)
[    0.248221] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.248221] ACPI: Added _OSI(Processor Aggregator Device)
[    0.248221] ACPI: Added _OSI(Linux-Dell-Video)
[    0.248221] ACPI: Added _OSI(Linux)
[    0.313850] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.325763] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query honored via cmdline
[    0.334506] ACPI: Dynamic OEM Table Load:
[    0.334531] ACPI: SSDT 0xFFFF8B0BA4B0D800 00058B (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.335436] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[    0.337268] ACPI: Dynamic OEM Table Load:
[    0.337281] ACPI: SSDT 0xFFFF8B0BA4AB1000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.338881] ACPI: Dynamic OEM Table Load:
[    0.338896] ACPI: SSDT 0xFFFF8B0BA4AE3000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.341118] ACPI: Dynamic OEM Table Load:
[    0.341130] ACPI: SSDT 0xFFFF8B0BA4AB4400 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.347440] ACPI: Interpreter enabled
[    0.347515] ACPI: (supports S0 S3 S4 S5)
[    0.347517] ACPI: Using IOAPIC for interrupt routing
[    0.347583] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.348586] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.360123] ACPI: Power Resource [PC01] (on)
[    0.365055] ACPI: Power Resource [WRST] (on)
[    0.383892] ACPI: Power Resource [FN00] (on)
[    0.386206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.386215] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.390769] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.394372] PCI host bridge to bus 0000:00
[    0.394375] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.394378] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.394380] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.394382] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.394384] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.394386] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.394388] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.394390] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.394392] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.394394] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.394396] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.394398] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.394400] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.394402] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.394404] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.394406] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.394408] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.394410] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.394413] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.394426] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[    0.395872] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[    0.395891] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb2ffffff 64bit]
[    0.395902] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.395909] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.395934] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.397412] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.397435] pci 0000:00:08.0: reg 0x10: [mem 0xb4228000-0xb4228fff 64bit]
[    0.398916] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.398945] pci 0000:00:14.0: reg 0x10: [mem 0xb4210000-0xb421ffff 64bit]
[    0.399032] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.400618] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.400647] pci 0000:00:14.2: reg 0x10: [mem 0xb4229000-0xb4229fff 64bit]
[    0.402220] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.402484] pci 0000:00:15.0: reg 0x10: [mem 0xb422a000-0xb422afff 64bit]
[    0.404842] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.405106] pci 0000:00:15.1: reg 0x10: [mem 0xb422b000-0xb422bfff 64bit]
[    0.407407] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.407440] pci 0000:00:16.0: reg 0x10: [mem 0xb422c000-0xb422cfff 64bit]
[    0.407531] pci 0000:00:16.0: PME# supported from D3hot
[    0.409091] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.409186] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.410751] pci 0000:00:1c.7: [8086:9d17] type 01 class 0x060400
[    0.410861] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.412397] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.412489] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.414058] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.415638] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.415659] pci 0000:00:1f.2: reg 0x10: [mem 0xb4224000-0xb4227fff]
[    0.417192] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.417228] pci 0000:00:1f.3: reg 0x10: [mem 0xb4220000-0xb4223fff 64bit]
[    0.417268] pci 0000:00:1f.3: reg 0x20: [mem 0xb4200000-0xb420ffff 64bit]
[    0.417332] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.418961] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.419024] pci 0000:00:1f.4: reg 0x10: [mem 0xb422d000-0xb422d0ff 64bit]
[    0.419096] pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]
[    0.420698] pci 0000:01:00.0: [10de:1d12] type 00 class 0x030200
[    0.420730] pci 0000:01:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
[    0.420748] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.420764] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[    0.420775] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.420786] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.421031] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.421036] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.421040] pci 0000:00:1c.0:   bridge window [mem 0xb3000000-0xb3ffffff]
[    0.421046] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[    0.421468] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
[    0.421577] pci 0000:02:00.0: reg 0x10: [mem 0xb4100000-0xb4101fff 64bit]
[    0.422124] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.422868] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.422875] pci 0000:00:1c.7:   bridge window [mem 0xb4100000-0xb41fffff]
[    0.422955] pci 0000:03:00.0: [144d:a804] type 00 class 0x010802
[    0.422990] pci 0000:03:00.0: reg 0x10: [mem 0xb4000000-0xb4003fff 64bit]
[    0.423241] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.423247] pci 0000:00:1d.0:   bridge window [mem 0xb4000000-0xb40fffff]
[    0.425431] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.425431] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.425431] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.426760] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.426864] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.426967] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.427070] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.427173] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.428174] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.428174] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.428174] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.428174] vgaarb: loaded
[    0.428174] pps_core: LinuxPPS API ver. 1 registered
[    0.428174] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.428174] PTP clock support registered
[    0.428174] EDAC MC: Ver: 3.0.0
[    0.428174] Registered efivars operations
[    0.490088] PCI: Using ACPI for IRQ routing
[    0.518824] PCI: pci_cache_line_size set to 64 bytes
[    0.519413] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.519415] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.519417] e820: reserve RAM buffer [mem 0x7187f000-0x73ffffff]
[    0.519419] e820: reserve RAM buffer [mem 0x73a68000-0x73ffffff]
[    0.519420] e820: reserve RAM buffer [mem 0x8a57e000-0x8bffffff]
[    0.519422] e820: reserve RAM buffer [mem 0x8cfff000-0x8fffffff]
[    0.519423] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[    0.520002] NetLabel: Initializing
[    0.520002] NetLabel:  domain hash size = 128
[    0.520002] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.520002] NetLabel:  unlabeled traffic allowed by default
[    0.520390] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.520390] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.523335] clocksource: Switched to clocksource tsc-early
[    0.538296] VFS: Disk quotas dquot_6.6.0
[    0.538318] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.538408] pnp: PnP ACPI init
[    0.538738] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.538741] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.538744] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.538746] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.538749] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.538751] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.538754] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.538761] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.539312] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.539318] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.539741] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.539744] system 00:02: [io  0xffff] has been reserved
[    0.539746] system 00:02: [io  0xffff] has been reserved
[    0.539749] system 00:02: [io  0xffff] has been reserved
[    0.539751] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.539753] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.539759] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.539937] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.539999] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.540013] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.540081] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.540157] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 (active)
[    0.542369] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.543354] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.543357] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.543360] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.543362] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.543364] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.543367] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.543370] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.543373] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.543375] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.543378] system 00:08: [mem 0x90000000-0x9001ffff] has been reserved
[    0.543383] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.543993] pnp: PnP ACPI: found 9 devices
[    0.550255] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.550260] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.550293] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.550296] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.550298] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.550302] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.550307] pci 0000:00:1c.0:   bridge window [mem 0xb3000000-0xb3ffffff]
[    0.550311] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[    0.550317] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.550324] pci 0000:00:1c.7:   bridge window [mem 0xb4100000-0xb41fffff]
[    0.550332] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.550337] pci 0000:00:1d.0:   bridge window [mem 0xb4000000-0xb40fffff]
[    0.550347] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.550349] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.550351] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.550353] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.550355] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.550357] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.550360] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.550362] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.550364] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.550366] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.550368] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.550370] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.550372] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.550374] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.550376] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.550378] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.550380] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window]
[    0.550383] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.550385] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.550387] pci_bus 0000:01: resource 1 [mem 0xb3000000-0xb3ffffff]
[    0.550389] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[    0.550392] pci_bus 0000:02: resource 1 [mem 0xb4100000-0xb41fffff]
[    0.550394] pci_bus 0000:03: resource 1 [mem 0xb4000000-0xb40fffff]
[    0.550658] NET: Registered protocol family 2
[    0.550843] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.550884] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.551032] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.551191] TCP: Hash tables configured (established 65536 bind 65536)
[    0.551234] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.551264] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.551330] NET: Registered protocol family 1
[    0.551347] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.553562] PCI: CLS 64 bytes, default 64
[    0.553608] Unpacking initramfs...
[    0.808897] Freeing initrd memory: 11812K
[    0.808952] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:15.0
[    0.808957] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.1
[    0.808976] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.808980] software IO TLB [mem 0x8596f000-0x8996f000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.809034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[    0.809063] clocksource: Switched to clocksource tsc
[    0.809246] Scanning for low memory corruption every 60 seconds
[    0.810131] Initialise system trusted keyrings
[    0.810149] Key type blacklist registered
[    0.810222] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.811866] zbud: loaded
[    0.812348] pstore: using lz4hc compression
[    0.813722] Key type asymmetric registered
[    0.813724] Asymmetric key parser 'x509' registered
[    0.813762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.813825] io scheduler noop registered
[    0.813826] io scheduler deadline registered
[    0.813880] io scheduler cfq registered (default)
[    0.813882] io scheduler mq-deadline registered
[    0.813883] io scheduler kyber registered
[    0.813892] io scheduler bfq registered
[    0.815132] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[    0.815161] pcieport 0000:00:1c.7: AER enabled with IRQ 123
[    0.815186] pcieport 0000:00:1d.0: AER enabled with IRQ 124
[    0.815203] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    0.815227] pcieport 0000:00:1c.7: Signaling PME with IRQ 123
[    0.815241] pcieport 0000:00:1d.0: Signaling PME with IRQ 124
[    0.815332] efifb: probing for efifb
[    0.815350] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[    0.815352] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.815352] efifb: scrolling: redraw
[    0.815355] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.821481] Console: switching to colour frame buffer device 240x67
[    0.827441] fb0: EFI VGA frame buffer device
[    0.827454] intel_idle: MWAIT substates: 0x11142120
[    0.827456] intel_idle: v0.4.1 model 0x8E
[    0.828034] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.828104] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C0C:00/input/input0
[    0.828120] ACPI: Power Button [PWRB]
[    0.828169] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C0D:00/input/input1
[    0.828177] ACPI: Lid Switch [LID0]
[    0.828259] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.828267] ACPI: Power Button [PWRF]
[    0.832756] thermal LNXTHERM:00: registered as thermal_zone0
[    0.832758] ACPI: Thermal Zone [TZ01] (46 C)
[    0.833054] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.835679] nvme nvme0: pci function 0000:03:00.0
[    0.835761] intel_pstate: Intel P-state driver initializing
[    0.836405] intel_pstate: HWP enabled
[    0.836663] ledtrig-cpu: registered to indicate activity on CPUs
[    0.836709] intel_pmc_core:  initialized
[    0.836977] NET: Registered protocol family 10
[    0.841939] Segment Routing with IPv6
[    0.841968] NET: Registered protocol family 17
[    0.842839] RAS: Correctable Errors collector initialized.
[    0.842921] microcode: sig=0x806ea, pf=0x80, revision=0x84
[    0.843122] microcode: Microcode Update Driver: v2.2.
[    0.843131] sched_clock: Marking stable (843118242, 0)->(831738691, 11379551)
[    0.843377] registered taskstats version 1
[    0.843387] Loading compiled-in X.509 certificates
[    0.843402] zswap: loaded using pool lzo/zbud
[    0.846205] Key type big_key registered
[    0.847243]   Magic number: 10:828:230
[    0.847272] acpi device:77: hash matches
[    0.847279] acpi device:4a: hash matches
[    0.847302] hctosys: unable to open rtc device (rtc0)
[    0.991740] Freeing unused kernel memory: 1476K
[    0.991742] Write protecting the kernel read-only data: 16384k
[    0.992680] Freeing unused kernel memory: 2016K
[    0.993508] Freeing unused kernel memory: 608K
[    1.061124] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    1.070362]  nvme0n1: p1 p2 p3 p4 p5 p6
[    1.077384] systemd[1]: Detected architecture x86-64.
[    1.077390] systemd[1]: Running in initial RAM disk.
[    1.083474] random: systemd: uninitialized urandom read (16 bytes read)
[    1.083479] systemd[1]: Initializing machine ID from random generator.
[    1.092985] random: systemd: uninitialized urandom read (16 bytes read)
[    1.092994] systemd[1]: Reached target Swap.
[    1.093026] random: systemd: uninitialized urandom read (16 bytes read)
[    1.093078] systemd[1]: Listening on udev Control Socket.
[    1.093089] systemd[1]: Reached target Timers.
[    1.094058] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
[    1.094707] systemd[1]: Listening on udev Kernel Socket.
[    1.094717] systemd[1]: Reached target Paths.
[    1.099953] Linux agpgart interface v0.103
[    1.142363] Setting dangerous option enable_guc - tainting kernel
[    1.142365] Setting dangerous option enable_psr - tainting kernel
[    1.142366] Setting dangerous option disable_power_well - tainting kernel
[    1.142367] Setting dangerous option enable_psr - tainting kernel
[    1.143170] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[    1.143171] fb: switching to inteldrmfb from EFI VGA
[    1.143185] Console: switching to colour dummy device 80x25
[    1.143246] [drm] Replacing VGA console driver
[    1.144250] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.144250] [drm] Driver supports precise vblank timestamp query.
[    1.144272] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.144736] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.145440] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.147215] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.147251] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.152810] ACPI: bus type USB registered
[    1.152925] usbcore: registered new interface driver usbfs
[    1.152934] usbcore: registered new interface driver hub
[    1.152965] usbcore: registered new device driver usb
[    1.154481] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0)
[    1.165919] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_39.bin (version 9.39)
[    1.175386] i915 0000:00:02.0: GuC firmware version 9.39
[    1.175387] i915 0000:00:02.0: GuC submission enabled
[    1.175388] i915 0000:00:02.0: HuC enabled
[    1.176585] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[    1.178333] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.178699] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    1.178771] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[    1.178780] ACPI: Video Device [PXSX] (multi-head: yes  rom: yes  post: no)
[    1.178802] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:34/LNXVIDEO:01/input/input5
[    1.178984] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.178990] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.180207] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.180232] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.180384] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.180671] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    1.180672] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.180673] usb usb1: Product: xHCI Host Controller
[    1.180674] usb usb1: Manufacturer: Linux 4.17.6-1-ARCH xhci-hcd
[    1.180675] usb usb1: SerialNumber: 0000:00:14.0
[    1.180795] hub 1-0:1.0: USB hub found
[    1.180820] hub 1-0:1.0: 12 ports detected
[    1.181591] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.181594] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.181596] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.181640] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    1.181641] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.181642] usb usb2: Product: xHCI Host Controller
[    1.181643] usb usb2: Manufacturer: Linux 4.17.6-1-ARCH xhci-hcd
[    1.181644] usb usb2: SerialNumber: 0000:00:14.0
[    1.181761] hub 2-0:1.0: USB hub found
[    1.181777] hub 2-0:1.0: 6 ports detected
[    1.181955] usb: port power management may be unreliable
[    1.212155] PM: Image not found (code -22)
[    1.276202] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[    1.295945] fbcon: inteldrmfb (fb0) is primary device
[    1.510246] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.652164] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[    1.652169] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.777118] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    1.925551] usb 1-6: New USB device found, idVendor=04f2, idProduct=b59a, bcdDevice=34.04
[    1.925556] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.925560] usb 1-6: Product: XiaoMi USB 2.0 Webcam
[    1.925563] usb 1-6: Manufacturer: Chicony
[    2.050293] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    2.190435] usb 1-7: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    2.190440] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.190444] usb 1-7: Product: USB2.0-CRW
[    2.190447] usb 1-7: Manufacturer: Generic
[    2.190450] usb 1-7: SerialNumber: 20100201396000000
[    2.190966] random: fast init done
[    2.197208] usbcore: registered new interface driver rtsx_usb
[    2.316817] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    2.383526] Console: switching to colour frame buffer device 240x67
[    2.410388] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.465273] usb 1-8: New USB device found, idVendor=04f3, idProduct=0c1a, bcdDevice= 1.42
[    2.465276] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.465278] usb 1-8: Product: ELAN:Fingerprint
[    2.465280] usb 1-8: Manufacturer: ELAN
[    2.526218] systemd-journald[163]: Received SIGTERM from PID 1 (systemd).
[    2.540564] systemd: 12 output lines suppressed due to ratelimiting
[    2.629911] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    2.647312] systemd[1]: Detected architecture x86-64.
[    2.649595] systemd[1]: Set hostname to <Archlinux-NotebookPro>.
[    2.763534] systemd[1]: Stopped Switch Root.
[    2.763615] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[    2.763653] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    2.763660] systemd[1]: Stopped Journal Service.
[    2.763697] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.763711] systemd[1]: Stopped target Switch Root.
[    2.763715] systemd[1]: Stopped target Initrd File Systems.
[    2.803990] systemd-journald[276]: Received request to flush runtime journal from PID 1
[    2.817012] vboxdrv: loading out-of-tree module taints kernel.
[    2.822031] vboxdrv: Found 8 processor cores
[    2.840193] vboxdrv: TSC mode is Invariant, tentative frequency 1799999764 Hz
[    2.840194] vboxdrv: Successfully loaded version 5.2.14 (interface 0x00290001)
[    2.842309] VBoxPciLinuxInit
[    2.842313] vboxpci: IOMMU not found (not registered)
[    2.844279] VBoxNetAdp: Successfully started.
[    2.846169] VBoxNetFlt: Successfully started.
[    2.895093] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    2.895096] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    2.895098] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    2.895100] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    2.940819] rtc_cmos 00:03: RTC can wake from S4
[    2.941642] ACPI: Battery Slot [BAT0] (battery present)
[    2.941716] rtc_cmos 00:03: registered as rtc0
[    2.941750] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.957185] ACPI: AC Adapter [ADP0] (off-line)
[    2.974340] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.975863] hidraw: raw HID events driver (C) Jiri Kosina
[    2.979463] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[    2.984004] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.984059] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.986268] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    2.993641] acpi INT33D5:00: intel-hid: created platform device
[    2.995249] Adding 8290300k swap on /swapfile.  Priority:-2 extents:7 across:10092540k SSFS
[    2.996584] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.996586] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.996587] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.996588] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.996588] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.996589] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.011536] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    3.042881] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.057866] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.060743] cryptd: max_cpu_qlen set to 1000
[    3.062867] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.063332] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.063555] cfg80211: failed to load regulatory.db
[    3.066803] AVX2 version of gcm_enc/dec engaged.
[    3.066805] AES CTR mode by8 optimization enabled
[    3.083819] random: crng init done
[    3.083821] random: 7 urandom warning(s) missed due to ratelimiting
[    3.087454] Intel(R) Wireless WiFi driver for Linux
[    3.087456] Copyright(c) 2003- 2015 Intel Corporation
[    3.091054] input: Intel HID events as /devices/pci0000:00/0000:00:1f.0/INT33D5:00/input/input9
[    3.091131] i2c_hid i2c-ETD2303:00: i2c-ETD2303:00 supply vdd not found, using dummy regulator
[    3.116548] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    3.117730] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    3.143562] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.144006] iwlwifi 0000:02:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm
[    3.150817] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.189162] iTCO_vendor_support: vendor-support=0
[    3.193027] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.193172] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    3.195149] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.238709] fuse init (API version 7.26)
[    3.239595] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    3.239605] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.239612] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.239617] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.239621] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.239627] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[    3.339904] input: ETD2303:00 04F3:3083 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-ETD2303:00/0018:04F3:3083.0001/input/input11
[    3.340204] hid-generic 0018:04F3:3083.0001: input,hidraw0: I2C HID v1.00 Mouse [ETD2303:00 04F3:3083] on i2c-ETD2303:00
[    3.371415] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    3.371608] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.371799] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.371994] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.372188] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    3.372372] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    3.452130] intel_rapl: Found RAPL domain package
[    3.452137] intel_rapl: Found RAPL domain core
[    3.452141] intel_rapl: Found RAPL domain uncore
[    3.452145] intel_rapl: Found RAPL domain dram
[    3.473662] input: ETD2303:00 04F3:3083 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-ETD2303:00/0018:04F3:3083.0001/input/input19
[    3.473940] hid-multitouch 0018:04F3:3083.0001: input,hidraw0: I2C HID v1.00 Mouse [ETD2303:00 04F3:3083] on i2c-ETD2303:00
[    3.501209] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[    3.502292] mousedev: PS/2 mouse device common for all mice
[    3.511790] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4d1f01)
[    3.522635] psmouse serio1: elantech: Synaptics capabilities query result 0x30, 0x1a, 0x11.
[    3.533445] psmouse serio1: elantech: Elan sample query result 03, 7d, 75
[    3.554730] RPC: Registered named UNIX socket transport module.
[    3.554735] RPC: Registered udp transport module.
[    3.554738] RPC: Registered tcp transport module.
[    3.554741] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.569482] iwlwifi 0000:02:00.0: base HW address: f8:94:c2:ed:67:7d
[    3.589577] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[    3.652166] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.652957] thermal thermal_zone3: failed to read out thermal zone (-61)
[    3.656224] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    3.757727] bbswitch: version 0.8
[    3.757745] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    3.757762] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.RP01.PXSX
[    3.757798] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180313/nsarguments-66)
[    3.758359] bbswitch: detected an Optimus _DSM function
[    3.795746] zram: Added device: zram0
[    3.796288] zram: Added device: zram1
[    3.798766] zram: Added device: zram2
[    3.799610] zram: Added device: zram3
[    3.800480] zram: Added device: zram4
[    3.801746] zram: Added device: zram5
[    3.802218] zram: Added device: zram6
[    3.802639] zram: Added device: zram7
[    3.829072] zram0: detected capacity change from 0 to 206143488
[    3.855832] zram1: detected capacity change from 0 to 206143488
[    3.880665] zram2: detected capacity change from 0 to 206143488
[    3.902513] zram3: detected capacity change from 0 to 206143488
[    3.932077] zram4: detected capacity change from 0 to 206143488
[    3.967777] zram5: detected capacity change from 0 to 206143488
[    3.999375] zram6: detected capacity change from 0 to 206143488
[    4.028985] zram7: detected capacity change from 0 to 206143488
[    4.033689] pci 0000:01:00.0: enabling device (0000 -> 0003)
[    4.033967] bbswitch: disabling discrete graphics
[    4.071390] Adding 201308k swap on /dev/zram0.  Priority:100 extents:1 across:201308k SSFS
[    4.071685] Adding 201308k swap on /dev/zram1.  Priority:100 extents:1 across:201308k SSFS
[    4.071949] Adding 201308k swap on /dev/zram2.  Priority:100 extents:1 across:201308k SSFS
[    4.072213] Adding 201308k swap on /dev/zram3.  Priority:100 extents:1 across:201308k SSFS
[    4.072473] Adding 201308k swap on /dev/zram4.  Priority:100 extents:1 across:201308k SSFS
[    4.072756] Adding 201308k swap on /dev/zram5.  Priority:100 extents:1 across:201308k SSFS
[    4.073016] Adding 201308k swap on /dev/zram6.  Priority:100 extents:1 across:201308k SSFS
[    4.073280] Adding 201308k swap on /dev/zram7.  Priority:100 extents:1 across:201308k SSFS
[    4.082892] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
[    4.170179] media: Linux media interface: v0.10
[    4.228008] Linux video capture interface: v2.00
[    4.277376] Bluetooth: Core ver 2.22
[    4.277427] NET: Registered protocol family 31
[    4.277430] Bluetooth: HCI device and connection manager initialized
[    4.277439] Bluetooth: HCI socket layer initialized
[    4.277445] Bluetooth: L2CAP socket layer initialized
[    4.277463] Bluetooth: SCO socket layer initialized
[    4.288074] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    4.295885] uvcvideo: Found UVC 1.00 device XiaoMi USB 2.0 Webcam (04f2:b59a)
[    4.302132] usbcore: registered new interface driver btusb
[    4.302681] Bluetooth: hci0: Firmware revision 0.1 build 103 week 50 2016
[    4.313912] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    4.313920] uvcvideo 1-6:1.0: Entity type for entity Extension 3 was not initialized!
[    4.313926] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    4.313932] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    4.314174] input: XiaoMi USB 2.0 Webcam: XiaoMi U as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input20
[    4.314490] usbcore: registered new interface driver uvcvideo
[    4.314492] USB Video Class driver (1.1.1)
[    4.362984] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.362987] Bluetooth: BNEP filters: protocol multicast
[    4.362995] Bluetooth: BNEP socket layer initialized
[    4.450405] pci 0000:01:00.0: Refused to change power state, currently in D3
[    4.505401] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    4.639669] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    4.833948] pci 0000:01:00.0: Refused to change power state, currently in D3
[    8.123135] wlp2s0: authenticate with e0:1c:41:ac:61:68
[    8.132380] wlp2s0: send auth to e0:1c:41:ac:61:68 (try 1/3)
[    8.137658] wlp2s0: authenticated
[    8.140135] wlp2s0: associate with e0:1c:41:ac:61:68 (try 1/3)
[    8.141601] wlp2s0: RX AssocResp from e0:1c:41:ac:61:68 (capab=0x401 status=0 aid=1)
[    8.144415] wlp2s0: associated
[    8.145575] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[    8.176022] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e0:1c:41:ac:61:68
[   18.484004] Bluetooth: RFCOMM TTY layer initialized
[   18.484020] Bluetooth: RFCOMM socket layer initialized
[   18.484035] Bluetooth: RFCOMM ver 1.11
[  153.870639] pci 0000:01:00.0: Refused to change power state, currently in D3
[  153.873576] bbswitch: enabling discrete graphics
[  153.873662] pci 0000:01:00.0: Refused to change power state, currently in D3
[  153.895529] pci 0000:01:00.0: Refused to change power state, currently in D3
[  157.956878] usb 1-4: new high-speed USB device number 6 using xhci_hcd
[  158.109963] usb 1-4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.04
[  158.109970] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  158.109974] usb 1-4: Product: 4-Port USB 2.0 Hub
[  158.109977] usb 1-4: Manufacturer: Generic
[  158.111450] hub 1-4:1.0: USB hub found
[  158.112032] hub 1-4:1.0: 4 ports detected
[  158.226851] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[  158.253813] usb 2-4: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.04
[  158.253820] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  158.253824] usb 2-4: Product: 4-Port USB 3.0 Hub
[  158.253828] usb 2-4: Manufacturer: Generic
[  158.258805] hub 2-4:1.0: USB hub found
[  158.259567] hub 2-4:1.0: 4 ports detected
[  158.400001] usb 1-4.1: new full-speed USB device number 7 using xhci_hcd
[  158.494902] usb 1-4.1: New USB device found, idVendor=05e3, idProduct=0604, bcdDevice= 0.12
[  158.494909] usb 1-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  158.494914] usb 1-4.1: Product: USB Hub
[  158.498924] hub 1-4.1:1.0: USB hub found
[  158.499944] hub 1-4.1:1.0: 4 ports detected
[  158.566797] usb 2-4.3: new SuperSpeed USB device number 3 using xhci_hcd
[  158.584844] usb 2-4.3: New USB device found, idVendor=174c, idProduct=1153, bcdDevice= 0.01
[  158.584852] usb 2-4.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  158.584856] usb 2-4.3: Product: AS2115
[  158.584860] usb 2-4.3: Manufacturer: ASMedia
[  158.584863] usb 2-4.3: SerialNumber: 00000000000000000000
[  158.656670] usb 1-4.2: new high-speed USB device number 8 using xhci_hcd
[  158.750164] usb 1-4.2: New USB device found, idVendor=1908, idProduct=0226, bcdDevice= 1.11
[  158.750181] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  158.823376] usb 2-4.4: new SuperSpeed USB device number 4 using xhci_hcd
[  158.840919] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[  158.840925] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[  158.840929] usb 2-4.4: Product: USB 10/100/1000 LAN
[  158.840932] usb 2-4.4: Manufacturer: Realtek
[  158.840936] usb 2-4.4: SerialNumber: 000001
[  158.913289] usb 1-4.1.2: new full-speed USB device number 9 using xhci_hcd
[  159.007318] usb 1-4.1.2: New USB device found, idVendor=1af3, idProduct=0001, bcdDevice= 0.01
[  159.007325] usb 1-4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  159.007329] usb 1-4.1.2: Product: ZOWIE Gaming mouse
[  159.007333] usb 1-4.1.2: Manufacturer: Kingsis Peripherals
[  159.401393] SCSI subsystem initialized
[  159.416808] usb-storage 2-4.3:1.0: USB Mass Storage device detected
[  159.417062] scsi host0: usb-storage 2-4.3:1.0
[  159.417327] usb-storage 1-4.2:1.0: USB Mass Storage device detected
[  159.417931] scsi host1: usb-storage 1-4.2:1.0
[  159.418247] usbcore: registered new interface driver usb-storage
[  159.424325] usbcore: registered new interface driver uas
[  159.443574] usbcore: registered new interface driver r8152
[  159.448096] usbcore: registered new interface driver cdc_ether
[  159.523997] usb 2-4.4: reset SuperSpeed USB device number 4 using xhci_hcd
[  159.580541] r8152 2-4.4:1.0 eth0: v1.09.9
[  159.584255] r8152 2-4.4:1.0 enp0s20f0u4u4: renamed from eth0
[  159.604503] IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u4u4: link is not ready
[  159.608383] IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u4u4: link is not ready
[  159.976715] pci 0000:01:00.0: Refused to change power state, currently in D3
[  160.105533] input: Kingsis Peripherals ZOWIE Gaming mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2:1.0/0003:1AF3:0001.0002/input/input21
[  160.105712] hid-generic 0003:1AF3:0001.0002: input,hidraw1: USB HID v1.11 Mouse [Kingsis Peripherals ZOWIE Gaming mouse] on usb-0000:00:14.0-4.1.2/input0
[  160.105748] usbcore: registered new interface driver usbhid
[  160.105748] usbhid: USB HID core driver
[  160.443566] scsi 0:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6
[  160.449288] scsi 1:0:0:0: Direct-Access     Generic  Mass-Storage     1.11 PQ: 0 ANSI: 2
[  160.449635] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[  160.449861] sd 0:0:0:0: [sda] Write Protect is off
[  160.449865] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[  160.450086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  160.714177] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[  161.052861]  sda: sda1
[  161.053741] sd 0:0:0:0: [sda] Attached SCSI disk
[  688.391249] bbswitch: enabling discrete graphics
[  688.391267] pci 0000:01:00.0: Refused to change power state, currently in D3

Last edited by MrKebi (2018-07-17 23:16:03)


Xiaomi Notebook Pro i5-8250u 8Go 256Go : Archlinux/Plasma

Offline

#14 2018-09-06 19:58:09

MrKebi
Member
Registered: 2016-04-12
Posts: 30

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

Up, any ideas ?


Xiaomi Notebook Pro i5-8250u 8Go 256Go : Archlinux/Plasma

Offline

#15 2018-09-11 02:46:43

bilabila
Member
Registered: 2018-08-07
Posts: 9
Website

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

Exactly same model, use i3wm and a nvidia-xrun like script to toggle nvidia. May be you can try other methods and application.

Offline

#16 2018-09-13 15:05:23

MrKebi
Member
Registered: 2016-04-12
Posts: 30

Re: Xiaomi Notebook Pro 15" : bumblebee doesn't work

I will try the nvidia-xrun script, thanks for the advice !


Xiaomi Notebook Pro i5-8250u 8Go 256Go : Archlinux/Plasma

Offline

Board footer

Powered by FluxBB