You are not logged in.

Pages: 1

#1 2018-09-21 08:25:50

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Unable to get Bumblebee working

I have a Dell Inspiron 7567, with an Nvidia GTX 1050ti.

I installed all necessary packages and drivers for both Intel and Nvidia Graphic Cards, and also installed Bumblebee.
I tried to check whether Bumblebee was working according to the instructions in the Arch Wiki by running
optirun glxgears -info

But it returns an error :

[  392.245164] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)

[  392.245186] [ERROR]Aborting because fallback start is disabled.

I am a newbie, so please suggest a fix for this. My laptop runs on the Nvidia card and drains a lot of battery very quickly.

Offline

#2 2018-09-21 10:22:33

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,840

Re: Unable to get Bumblebee working

Output of

groups
systemctl status bumblebeed

as well as your regular Xorg log, please

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2018-09-22 13:13:29

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Re: Unable to get Bumblebee working

Alright.

The output of groups is :

 bumblebee users video input

The output of systemctl status bumblebeed is :

 * bumblebeed.service - Bumblebee C Daemon
   Loaded: loaded (/usr/lib/systemd/system/bumblebeed.service; enabled; vendor >
   Active: active (running) since Sat 2018-09-22 23:49:18 IST; 8min ago
 Main PID: 310 (bumblebeed)
    Tasks: 1 (limit: 4915)
   Memory: 2.1M
   CGroup: /system.slice/bumblebeed.service
           `-310 /usr/bin/bumblebeed

Warning: Journal has been rotated since unit was started. Log output is incompl>

There are two Xorg logs, so I'll post both.

The log, Xorg.0.log :

  [     5.725] (--) Log file renamed from "/var/log/Xorg.pid-407.log" to "/var/log/Xorg.0.log"
[     5.726] 
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
[     5.726] Build Operating System: Linux Arch Linux
[     5.726] Current Operating System: Linux thewhitew0lf 4.14.67-1-lts #1 SMP Fri Aug 24 16:54:09 CEST 2018 x86_64
[     5.726] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=415d5464-e2d2-4b3b-8210-85025a6cd68d rw quiet
[     5.726] Build Date: 09 August 2018  06:37:34PM
[     5.726]  
[     5.726] Current version of pixman: 0.34.0
[     5.726] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[     5.726] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.726] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 22 23:49:20 2018
[     5.728] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.728] (==) No Layout section.  Using the first Screen section.
[     5.728] (==) No screen section available. Using defaults.
[     5.728] (**) |-->Screen "Default Screen Section" (0)
[     5.728] (**) |   |-->Monitor "<default monitor>"
[     5.729] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.729] (==) Automatically adding devices
[     5.729] (==) Automatically enabling devices
[     5.729] (==) Automatically adding GPU devices
[     5.729] (==) Automatically binding GPU devices
[     5.729] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.730] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[     5.730] 	Entry deleted from font path.
[     5.730] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[     5.731] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.731] 	Entry deleted from font path.
[     5.733] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[     5.733] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.733] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.733] (II) Module ABI versions:
[     5.733] 	X.Org ANSI C Emulation: 0.4
[     5.733] 	X.Org Video Driver: 24.0
[     5.733] 	X.Org XInput driver : 24.1
[     5.733] 	X.Org Server Extension : 10.0
[     5.733] (++) using VT number 1

[     5.733] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.733] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.739] (--) PCI:*(0@0:2:0) 8086:591b:1028:0798 rev 4, Mem @ 0xd4000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     5.739] (--) PCI: (1@0:0:0) 10de:1c8c:1028:0798 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     5.739] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.739] (II) LoadModule: "glx"
[     5.739] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.748] (II) Module glx: vendor="X.Org Foundation"
[     5.748] 	compiled for 1.20.1, module version = 1.0.0
[     5.748] 	ABI class: X.Org Server Extension, version 10.0
[     5.748] (II) Applying OutputClass "intel" to /dev/dri/card0
[     5.748] 	loading driver: modesetting
[     5.748] (==) Matched modesetting as autoconfigured driver 0
[     5.748] (==) Matched intel as autoconfigured driver 1
[     5.748] (==) Matched fbdev as autoconfigured driver 2
[     5.748] (==) Matched vesa as autoconfigured driver 3
[     5.748] (==) Assigned the driver to the xf86ConfigLayout
[     5.748] (II) LoadModule: "modesetting"
[     5.749] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.751] (II) Module modesetting: vendor="X.Org Foundation"
[     5.751] 	compiled for 1.20.1, module version = 1.20.1
[     5.751] 	Module class: X.Org Video Driver
[     5.751] 	ABI class: X.Org Video Driver, version 24.0
[     5.751] (II) LoadModule: "intel"
[     5.751] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.755] (II) Module intel: vendor="X.Org Foundation"
[     5.755] 	compiled for 1.20.1, module version = 2.99.917
[     5.755] 	Module class: X.Org Video Driver
[     5.755] 	ABI class: X.Org Video Driver, version 24.0
[     5.755] (II) LoadModule: "fbdev"
[     5.755] (WW) Warning, couldn't open module fbdev
[     5.755] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     5.755] (II) LoadModule: "vesa"
[     5.755] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.756] (II) Module vesa: vendor="X.Org Foundation"
[     5.756] 	compiled for 1.20.0, module version = 2.4.0
[     5.756] 	Module class: X.Org Video Driver
[     5.756] 	ABI class: X.Org Video Driver, version 24.0
[     5.756] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.756] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     5.756] (II) intel: Driver for Intel(R) HD Graphics
[     5.756] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     5.756] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     5.756] (II) VESA: driver for VESA chipsets: vesa
[     5.770] (II) modeset(0): using drv /dev/dri/card0
[     5.771] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.771] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     5.771] (==) modeset(0): RGB weight 888
[     5.771] (==) modeset(0): Default visual is TrueColor
[     5.771] (II) Loading sub module "glamoregl"
[     5.771] (II) LoadModule: "glamoregl"
[     5.771] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     5.777] (II) Module glamoregl: vendor="X.Org Foundation"
[     5.777] 	compiled for 1.20.1, module version = 1.0.1
[     5.777] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.849] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 630 (Kaby Lake GT2) 
[     5.849] (II) modeset(0): glamor initialized
[     5.850] (II) modeset(0): Output eDP-1 has no monitor section
[     6.118] (II) modeset(0): Output DP-1 has no monitor section
[     6.119] (II) modeset(0): EDID for output eDP-1
[     6.119] (II) modeset(0): Manufacturer: LGD  Model: 53f  Serial#: 0
[     6.119] (II) modeset(0): Year: 2016  Week: 0
[     6.119] (II) modeset(0): EDID Version: 1.4
[     6.119] (II) modeset(0): Digital Display Input
[     6.119] (II) modeset(0): 6 bits per channel
[     6.119] (II) modeset(0): Digital interface is DisplayPort
[     6.119] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     6.119] (II) modeset(0): Gamma: 2.20
[     6.119] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[     6.119] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     6.119] (II) modeset(0): First detailed timing is preferred mode
[     6.119] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     6.119] (II) modeset(0): redX: 0.580 redY: 0.350   greenX: 0.340 greenY: 0.560
[     6.119] (II) modeset(0): blueX: 0.155 blueY: 0.125   whiteX: 0.313 whiteY: 0.329
[     6.119] (II) modeset(0): Manufacturer's mask: 0
[     6.119] (II) modeset(0): Supported detailed timing:
[     6.119] (II) modeset(0): clock: 138.7 MHz   Image Size:  344 x 194 mm
[     6.119] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[     6.119] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[     6.119] (II) modeset(0): Supported detailed timing:
[     6.119] (II) modeset(0): clock: 111.0 MHz   Image Size:  344 x 194 mm
[     6.119] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[     6.119] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[     6.119] (II) modeset(0):  4XK13\80156WF6
[     6.119] (II) modeset(0): Unknown vendor-specific block 0
[     6.119] (II) modeset(0): EDID (in hex):
[     6.119] (II) modeset(0): 	00ffffffffffff0030e43f0500000000
[     6.119] (II) modeset(0): 	001a010495221378eaa1c59459578f27
[     6.119] (II) modeset(0): 	20505400000001010101010101010101
[     6.119] (II) modeset(0): 	0101010101012e3680a070381f403020
[     6.119] (II) modeset(0): 	350058c21000001a5c2b80a070381f40
[     6.119] (II) modeset(0): 	3020350058c21000001a000000fe0034
[     6.120] (II) modeset(0): 	584b3133803135365746360a00000000
[     6.120] (II) modeset(0): 	0000413196001000000a010a202000c5
[     6.120] (II) modeset(0): Printing probed modes for output eDP-1
[     6.120] (II) modeset(0): Modeline "1920x1080"x60.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[     6.120] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[     6.120] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[     6.120] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[     6.120] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[     6.120] (II) modeset(0): Modeline "1920x1080"x48.0  111.00  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (53.4 kHz e)
[     6.120] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[     6.120] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[     6.120] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     6.120] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[     6.120] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[     6.120] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[     6.120] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[     6.120] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     6.120] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[     6.120] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[     6.120] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     6.120] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[     6.120] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[     6.120] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[     6.120] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[     6.120] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[     6.120] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[     6.120] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[     6.120] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[     6.120] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[     6.120] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[     6.120] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[     6.120] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[     6.120] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     6.120] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     6.120] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     6.120] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     6.120] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     6.120] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[     6.120] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[     6.120] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[     6.120] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[     6.120] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[     6.120] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     6.120] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[     6.120] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     6.120] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[     6.120] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[     6.120] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     6.120] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     6.120] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     6.120] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     6.120] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     6.120] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[     6.120] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[     6.120] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     6.120] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[     6.120] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[     6.120] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     6.120] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[     6.120] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[     6.120] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     6.120] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     6.120] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[     6.120] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[     6.120] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[     6.120] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[     6.120] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[     6.120] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[     6.120] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[     6.120] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[     6.120] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[     6.120] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[     6.120] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     6.120] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[     6.120] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[     6.120] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[     6.120] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[     6.120] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     6.120] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     6.120] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[     6.120] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[     6.120] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     6.120] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[     6.120] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[     6.120] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[     6.120] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[     6.387] (II) modeset(0): EDID for output DP-1
[     6.387] (II) modeset(0): Output eDP-1 connected
[     6.387] (II) modeset(0): Output DP-1 disconnected
[     6.387] (II) modeset(0): Using exact sizes for initial modes
[     6.387] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[     6.387] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.387] (==) modeset(0): DPI set to (96, 96)
[     6.387] (II) Loading sub module "fb"
[     6.387] (II) LoadModule: "fb"
[     6.387] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.389] (II) Module fb: vendor="X.Org Foundation"
[     6.389] 	compiled for 1.20.1, module version = 1.0.0
[     6.389] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.389] (II) UnloadModule: "intel"
[     6.389] (II) Unloading intel
[     6.389] (II) UnloadModule: "vesa"
[     6.389] (II) Unloading vesa
[     6.399] (==) modeset(0): Backing store enabled
[     6.399] (==) modeset(0): Silken mouse disabled
[     6.454] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[     6.454] (==) modeset(0): DPMS enabled
[     6.454] (II) modeset(0): [DRI2] Setup complete
[     6.454] (II) modeset(0): [DRI2]   DRI driver: i965
[     6.454] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     6.454] (II) Initializing extension Generic Event Extension
[     6.454] (II) Initializing extension SHAPE
[     6.454] (II) Initializing extension MIT-SHM
[     6.454] (II) Initializing extension XInputExtension
[     6.454] (II) Initializing extension XTEST
[     6.454] (II) Initializing extension BIG-REQUESTS
[     6.455] (II) Initializing extension SYNC
[     6.455] (II) Initializing extension XKEYBOARD
[     6.455] (II) Initializing extension XC-MISC
[     6.455] (II) Initializing extension SECURITY
[     6.455] (II) Initializing extension XFIXES
[     6.455] (II) Initializing extension RENDER
[     6.455] (II) Initializing extension RANDR
[     6.455] (II) Initializing extension COMPOSITE
[     6.455] (II) Initializing extension DAMAGE
[     6.455] (II) Initializing extension MIT-SCREEN-SAVER
[     6.456] (II) Initializing extension DOUBLE-BUFFER
[     6.456] (II) Initializing extension RECORD
[     6.456] (II) Initializing extension DPMS
[     6.456] (II) Initializing extension Present
[     6.456] (II) Initializing extension DRI3
[     6.456] (II) Initializing extension X-Resource
[     6.456] (II) Initializing extension XVideo
[     6.456] (II) Initializing extension XVideo-MotionCompensation
[     6.456] (II) Initializing extension GLX
[     6.460] (II) AIGLX: Loaded and initialized i965
[     6.460] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.460] (II) Initializing extension XFree86-VidModeExtension
[     6.460] (II) Initializing extension XFree86-DGA
[     6.460] (II) Initializing extension XFree86-DRI
[     6.460] (II) Initializing extension DRI2
[     6.469] (II) modeset(0): Damage tracking initialized
[     6.469] (II) modeset(0): Setting screen physical size to 508 x 285
[     6.569] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[     6.569] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.569] (II) LoadModule: "libinput"
[     6.569] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.575] (II) Module libinput: vendor="X.Org Foundation"
[     6.575] 	compiled for 1.20.0, module version = 0.28.0
[     6.575] 	Module class: X.Org XInput Driver
[     6.575] 	ABI class: X.Org XInput driver, version 24.1
[     6.575] (II) Using input driver 'libinput' for 'Power Button'
[     6.575] (**) Power Button: always reports core events
[     6.575] (**) Option "Device" "/dev/input/event6"
[     6.575] (**) Option "_source" "server/udev"
[     6.576] (II) event6  - Power Button: is tagged by udev as: Keyboard
[     6.576] (II) event6  - Power Button: device is a keyboard
[     6.576] (II) event6  - Power Button: device removed
[     6.630] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[     6.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.631] (II) event6  - Power Button: is tagged by udev as: Keyboard
[     6.631] (II) event6  - Power Button: device is a keyboard
[     6.632] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     6.632] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.632] (II) Using input driver 'libinput' for 'Video Bus'
[     6.632] (**) Video Bus: always reports core events
[     6.632] (**) Option "Device" "/dev/input/event13"
[     6.632] (**) Option "_source" "server/udev"
[     6.633] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     6.633] (II) event13 - Video Bus: device is a keyboard
[     6.633] (II) event13 - Video Bus: device removed
[     6.710] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20/event13"
[     6.710] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.711] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     6.711] (II) event13 - Video Bus: device is a keyboard
[     6.712] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[     6.712] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.712] (II) Using input driver 'libinput' for 'Video Bus'
[     6.712] (**) Video Bus: always reports core events
[     6.712] (**) Option "Device" "/dev/input/event14"
[     6.712] (**) Option "_source" "server/udev"
[     6.713] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[     6.713] (II) event14 - Video Bus: device is a keyboard
[     6.713] (II) event14 - Video Bus: device removed
[     6.790] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input21/event14"
[     6.790] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     6.791] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[     6.791] (II) event14 - Video Bus: device is a keyboard
[     6.792] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     6.792] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.792] (II) Using input driver 'libinput' for 'Power Button'
[     6.792] (**) Power Button: always reports core events
[     6.792] (**) Option "Device" "/dev/input/event4"
[     6.792] (**) Option "_source" "server/udev"
[     6.793] (II) event4  - Power Button: is tagged by udev as: Keyboard
[     6.793] (II) event4  - Power Button: device is a keyboard
[     6.793] (II) event4  - Power Button: device removed
[     6.830] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[     6.830] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     6.831] (II) event4  - Power Button: is tagged by udev as: Keyboard
[     6.831] (II) event4  - Power Button: device is a keyboard
[     6.832] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[     6.832] (II) No input driver specified, ignoring this device.
[     6.832] (II) This device may have been added with another device file.
[     6.833] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[     6.833] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.833] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.833] (**) Sleep Button: always reports core events
[     6.833] (**) Option "Device" "/dev/input/event5"
[     6.833] (**) Option "_source" "server/udev"
[     6.834] (II) event5  - Sleep Button: is tagged by udev as: Keyboard
[     6.834] (II) event5  - Sleep Button: device is a keyboard
[     6.834] (II) event5  - Sleep Button: device removed
[     6.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event5"
[     6.870] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[     6.871] (II) event5  - Sleep Button: is tagged by udev as: Keyboard
[     6.871] (II) event5  - Sleep Button: device is a keyboard
[     6.873] (II) config/udev: Adding input device Integrated Webcam: Integrated W (/dev/input/event9)
[     6.873] (**) Integrated Webcam: Integrated W: Applying InputClass "libinput keyboard catchall"
[     6.873] (II) Using input driver 'libinput' for 'Integrated Webcam: Integrated W'
[     6.873] (**) Integrated Webcam: Integrated W: always reports core events
[     6.873] (**) Option "Device" "/dev/input/event9"
[     6.873] (**) Option "_source" "server/udev"
[     6.874] (II) event9  - Integrated Webcam: Integrated W: is tagged by udev as: Keyboard
[     6.874] (II) event9  - Integrated Webcam: Integrated W: device is a keyboard
[     6.874] (II) event9  - Integrated Webcam: Integrated W: device removed
[     6.950] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input10/event9"
[     6.950] (II) XINPUT: Adding extended input device "Integrated Webcam: Integrated W" (type: KEYBOARD, id 11)
[     6.951] (II) event9  - Integrated Webcam: Integrated W: is tagged by udev as: Keyboard
[     6.951] (II) event9  - Integrated Webcam: Integrated W: device is a keyboard
[     6.952] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[     6.953] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[     6.953] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[     6.953] (**) Logitech USB Receiver: always reports core events
[     6.953] (**) Option "Device" "/dev/input/event1"
[     6.953] (**) Option "_source" "server/udev"
[     6.954] (II) event1  - Logitech USB Receiver: is tagged by udev as: Keyboard
[     6.954] (II) event1  - Logitech USB Receiver: device is a keyboard
[     6.954] (II) event1  - Logitech USB Receiver: device removed
[     6.990] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C534.0001/input/input2/event1"
[     6.990] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[     6.991] (II) event1  - Logitech USB Receiver: is tagged by udev as: Keyboard
[     6.991] (II) event1  - Logitech USB Receiver: device is a keyboard
[     6.993] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[     6.993] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[     6.993] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[     6.993] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[     6.993] (**) Logitech USB Receiver: always reports core events
[     6.993] (**) Option "Device" "/dev/input/event2"
[     6.993] (**) Option "_source" "server/udev"
[     6.994] (II) event2  - Logitech USB Receiver: is tagged by udev as: Keyboard Mouse
[     6.994] (II) event2  - Logitech USB Receiver: device is a pointer
[     6.994] (II) event2  - Logitech USB Receiver: device is a keyboard
[     6.994] (II) event2  - Logitech USB Receiver: device removed
[     7.030] (II) libinput: Logitech USB Receiver: needs a virtual subdevice
[     7.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input3/event2"
[     7.030] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 13)
[     7.030] (**) Option "AccelerationScheme" "none"
[     7.030] (**) Logitech USB Receiver: (accel) selected scheme none/0
[     7.030] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[     7.030] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[     7.031] (II) event2  - Logitech USB Receiver: is tagged by udev as: Keyboard Mouse
[     7.031] (II) event2  - Logitech USB Receiver: device is a pointer
[     7.031] (II) event2  - Logitech USB Receiver: device is a keyboard
[     7.033] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[     7.033] (II) No input driver specified, ignoring this device.
[     7.033] (II) This device may have been added with another device file.
[     7.034] (II) config/udev: Adding input device DLL0798:00 06CB:7E92 Touchpad (/dev/input/event12)
[     7.034] (**) DLL0798:00 06CB:7E92 Touchpad: Applying InputClass "libinput touchpad catchall"
[     7.034] (**) DLL0798:00 06CB:7E92 Touchpad: Applying InputClass "touchpad catchall"
[     7.034] (**) DLL0798:00 06CB:7E92 Touchpad: Applying InputClass "Default clickpad buttons"
[     7.034] (II) LoadModule: "synaptics"
[     7.034] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     7.035] (II) Module synaptics: vendor="X.Org Foundation"
[     7.035] 	compiled for 1.20.0, module version = 1.9.1
[     7.035] 	Module class: X.Org XInput Driver
[     7.035] 	ABI class: X.Org XInput driver, version 24.1
[     7.035] (II) Using input driver 'synaptics' for 'DLL0798:00 06CB:7E92 Touchpad'
[     7.035] (**) DLL0798:00 06CB:7E92 Touchpad: always reports core events
[     7.035] (**) Option "Device" "/dev/input/event12"
[     7.230] (II) synaptics: DLL0798:00 06CB:7E92 Touchpad: found clickpad property
[     7.230] (--) synaptics: DLL0798:00 06CB:7E92 Touchpad: x-axis range 0 - 1229 (res 12)
[     7.230] (--) synaptics: DLL0798:00 06CB:7E92 Touchpad: y-axis range 0 - 929 (res 12)
[     7.230] (II) synaptics: DLL0798:00 06CB:7E92 Touchpad: device does not report pressure, will use touch data.
[     7.230] (II) synaptics: DLL0798:00 06CB:7E92 Touchpad: device does not report finger width.
[     7.230] (--) synaptics: DLL0798:00 06CB:7E92 Touchpad: buttons: left double triple
[     7.230] (--) synaptics: DLL0798:00 06CB:7E92 Touchpad: Vendor 0x6cb Product 0x7e92
[     7.230] (--) synaptics: DLL0798:00 06CB:7E92 Touchpad: invalid pressure range.  defaulting to 0 - 255
[     7.230] (--) synaptics: DLL0798:00 06CB:7E92 Touchpad: invalid finger width range.  defaulting to 0 - 15
[     7.230] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     7.230] (--) synaptics: DLL0798:00 06CB:7E92 Touchpad: touchpad found
[     7.230] (**) DLL0798:00 06CB:7E92 Touchpad: always reports core events
[     7.310] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL0798:00/0018:06CB:7E92.0003/input/input15/event12"
[     7.310] (II) XINPUT: Adding extended input device "DLL0798:00 06CB:7E92 Touchpad" (type: TOUCHPAD, id 14)
[     7.310] (**) synaptics: DLL0798:00 06CB:7E92 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[     7.310] (**) synaptics: DLL0798:00 06CB:7E92 Touchpad: (accel) MaxSpeed is now 1.75
[     7.310] (**) synaptics: DLL0798:00 06CB:7E92 Touchpad: (accel) AccelFactor is now 0.130
[     7.310] (**) DLL0798:00 06CB:7E92 Touchpad: (accel) keeping acceleration scheme 1
[     7.310] (**) DLL0798:00 06CB:7E92 Touchpad: (accel) acceleration profile 1
[     7.310] (**) DLL0798:00 06CB:7E92 Touchpad: (accel) acceleration factor: 2.000
[     7.310] (**) DLL0798:00 06CB:7E92 Touchpad: (accel) acceleration threshold: 4
[     7.311] (--) synaptics: DLL0798:00 06CB:7E92 Touchpad: touchpad found
[     7.312] (II) config/udev: Adding input device DLL0798:00 06CB:7E92 Touchpad (/dev/input/mouse1)
[     7.312] (**) DLL0798:00 06CB:7E92 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     7.313] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event15)
[     7.313] (II) No input driver specified, ignoring this device.
[     7.313] (II) This device may have been added with another device file.
[     7.313] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event16)
[     7.313] (II) No input driver specified, ignoring this device.
[     7.313] (II) This device may have been added with another device file.
[     7.314] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[     7.314] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[     7.314] (II) Using input driver 'libinput' for 'Intel HID events'
[     7.314] (**) Intel HID events: always reports core events
[     7.314] (**) Option "Device" "/dev/input/event7"
[     7.314] (**) Option "_source" "server/udev"
[     7.315] (II) event7  - Intel HID events: is tagged by udev as: Keyboard
[     7.315] (II) event7  - Intel HID events: device is a keyboard
[     7.315] (II) event7  - Intel HID events: device removed
[     7.350] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input8/event7"
[     7.350] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 15)
[     7.351] (II) event7  - Intel HID events: is tagged by udev as: Keyboard
[     7.351] (II) event7  - Intel HID events: device is a keyboard
[     7.352] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event8)
[     7.352] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[     7.352] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[     7.352] (**) Intel HID 5 button array: always reports core events
[     7.352] (**) Option "Device" "/dev/input/event8"
[     7.352] (**) Option "_source" "server/udev"
[     7.353] (II) event8  - Intel HID 5 button array: is tagged by udev as: Keyboard Switch
[     7.353] (II) event8  - Intel HID 5 button array: device is a keyboard
[     7.353] (II) event8  - Intel HID 5 button array: device removed
[     7.390] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input9/event8"
[     7.390] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 16)
[     7.391] (II) event8  - Intel HID 5 button array: is tagged by udev as: Keyboard Switch
[     7.391] (II) event8  - Intel HID 5 button array: device is a keyboard
[     7.392] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event11)
[     7.392] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     7.392] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[     7.392] (**) Dell WMI hotkeys: always reports core events
[     7.392] (**) Option "Device" "/dev/input/event11"
[     7.392] (**) Option "_source" "server/udev"
[     7.393] (II) event11 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     7.393] (II) event11 - Dell WMI hotkeys: device is a keyboard
[     7.393] (II) event11 - Dell WMI hotkeys: device removed
[     7.470] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input13/event11"
[     7.470] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
[     7.471] (II) event11 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     7.471] (II) event11 - Dell WMI hotkeys: device is a keyboard
[     7.472] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     7.472] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     7.472] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     7.472] (**) AT Translated Set 2 keyboard: always reports core events
[     7.472] (**) Option "Device" "/dev/input/event0"
[     7.472] (**) Option "_source" "server/udev"
[     7.473] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     7.473] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     7.473] (II) event0  - AT Translated Set 2 keyboard: device removed
[     7.510] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     7.510] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[     7.511] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     7.511] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     7.512] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[     7.512] (II) No input driver specified, ignoring this device.
[     7.512] (II) This device may have been added with another device file.
[     7.516] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[     7.516] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[     7.516] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[     7.516] (**) Logitech USB Receiver: always reports core events
[     7.516] (**) Option "Device" "/dev/input/event2"
[     7.516] (**) Option "_source" "_driver/libinput"
[     7.516] (II) libinput: Logitech USB Receiver: is a virtual subdevice
[     7.516] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input3/event2"
[     7.516] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 19)
[     7.537] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event15)
[     7.537] (II) No input driver specified, ignoring this device.
[     7.537] (II) This device may have been added with another device file.
[     7.538] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event16)
[     7.538] (II) No input driver specified, ignoring this device.
[     7.538] (II) This device may have been added with another device file.
[    13.861] (II) modeset(0): EDID vendor "LGD", prod id 1343
[    13.861] (II) modeset(0): Printing DDC gathered Modelines:
[    13.861] (II) modeset(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    13.861] (II) modeset(0): Modeline "1920x1080"x0.0  111.00  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (53.4 kHz e)
[    14.650] (II) modeset(0): EDID vendor "LGD", prod id 1343
[    14.650] (II) modeset(0): Printing DDC gathered Modelines:
[    14.650] (II) modeset(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    14.650] (II) modeset(0): Modeline "1920x1080"x0.0  111.00  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (53.4 kHz e)

The log, Xorg.8.log :

 [   392.239] 
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
[   392.239] Build Operating System: Linux Arch Linux
[   392.239] Current Operating System: Linux thewhitew0lf 4.14.67-1-lts #1 SMP Fri Aug 24 16:54:09 CEST 2018 x86_64
[   392.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=415d5464-e2d2-4b3b-8210-85025a6cd68d rw quiet
[   392.239] Build Date: 09 August 2018  06:37:34PM
[   392.239]  
[   392.239] Current version of pixman: 0.34.0
[   392.240] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[   392.240] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   392.240] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Sep 21 19:02:50 2018
[   392.240] (++) Using config file: "/etc/bumblebee/xorg.conf.nouveau"
[   392.240] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[   392.240] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   392.240] (==) ServerLayout "Layout0"
[   392.240] (==) No screen section available. Using defaults.
[   392.240] (**) |-->Screen "Default Screen Section" (0)
[   392.240] (**) |   |-->Monitor "<default monitor>"
[   392.240] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   392.240] (**) |   |-->Device "DiscreteNvidia"
[   392.240] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   392.240] (**) Option "AutoAddDevices" "false"
[   392.240] (**) Option "AutoAddGPU" "false"
[   392.240] (**) Not automatically adding devices
[   392.240] (==) Automatically enabling devices
[   392.240] (**) Not automatically adding GPU devices
[   392.240] (==) Automatically binding GPU devices
[   392.240] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   392.240] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[   392.240] 	Entry deleted from font path.
[   392.240] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[   392.240] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   392.240] 	Entry deleted from font path.
[   392.240] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   392.240] (==) ModulePath set to "/usr/lib/xorg/modules"
[   392.240] (==) |-->Input Device "<default pointer>"
[   392.240] (==) |-->Input Device "<default keyboard>"
[   392.240] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[   392.240] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[   392.240] (II) Module ABI versions:
[   392.240] 	X.Org ANSI C Emulation: 0.4
[   392.240] 	X.Org Video Driver: 24.0
[   392.240] 	X.Org XInput driver : 24.1
[   392.240] 	X.Org Server Extension : 10.0
[   392.241] (--) using VT number 1

[   392.241] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   392.241] (II) xfree86: Adding drm device (/dev/dri/card1)
[   392.241] (II) xfree86: Adding drm device (/dev/dri/card0)
[   392.241] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[   392.243] (--) PCI:*(1@0:0:0) 10de:1c8c:1028:0798 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   392.243] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   392.243] (II) LoadModule: "glx"
[   392.243] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   392.244] (II) Module glx: vendor="X.Org Foundation"
[   392.244] 	compiled for 1.20.1, module version = 1.0.0
[   392.244] 	ABI class: X.Org Server Extension, version 10.0
[   392.244] (II) LoadModule: "nouveau"
[   392.244] (WW) Warning, couldn't open module nouveau
[   392.244] (EE) Failed to load module "nouveau" (module does not exist, 0)
[   392.244] (II) LoadModule: "mouse"
[   392.244] (WW) Warning, couldn't open module mouse
[   392.244] (EE) Failed to load module "mouse" (module does not exist, 0)
[   392.244] (II) LoadModule: "kbd"
[   392.244] (WW) Warning, couldn't open module kbd
[   392.244] (EE) Failed to load module "kbd" (module does not exist, 0)
[   392.244] (EE) No drivers available.
[   392.244] (EE) 
Fatal server error:
[   392.244] (EE) no screens found(EE) 
[   392.244] (EE) 
Please consult the The X.Org Foundation support 
	 at [url]http://wiki.x.org[/url]
 for help. 
[   392.244] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[   392.244] (EE) 
[   392.244] (EE) Server terminated with error (1). Closing log file.

Offline

#4 2018-09-22 13:25:07

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,840

Re: Unable to get Bumblebee working

Your X11 session is running on the intel chip, that's not the cause for your battery drain.

pacman -Qs nvidia
pacman -Qs nouveau

You do not intend to use the nvidia blob?
(Both is possible, but I'm not sure about the nouveau support quality for your GPU)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2018-09-22 14:00:21

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Re: Unable to get Bumblebee working

Nope, I do not want to use the Nvidia GPU. It is enough if it runs on the intel GPU.

Offline

#6 2018-09-22 14:03:48

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,840

Re: Unable to get Bumblebee working

The "nvidia blob" is the proprietary driver.
If you do not want to use the nvidia GPU at all, you should ideally deactivate it in UEFI/BIOS or use bbswitch, https://wiki.archlinux.org/index.php/Bu … management
Also, you should certainly not optirun stuff - that will invoke the nvidia chip

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2018-09-22 14:15:32

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Re: Unable to get Bumblebee working

Alright, but what is the cause for my battery drain? If the Nvidia card isn't being used, my laptop usually lasts ~8-9 hours. Now I barely get 3-4 hours.

Offline

#8 2018-09-22 14:21:49

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,840

Re: Unable to get Bumblebee working

https://wiki.archlinux.org/index.php/Powertop

Also, if the GPU isn't deactivated by UEFI, bbswitch (or bumblebee) or even uninitialized, it might run on full steam while doing nothing.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2018-09-22 14:29:30

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Re: Unable to get Bumblebee working

I installed powertop, and checked. The Nvidia GPU is in use.

Probably what is causing the battery drain. Do you know a way I can disable it? There is no option in the BIOS to disable the card.

Offline

#10 2018-09-22 14:34:42

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,840

Re: Unable to get Bumblebee working

Yes, bbswitch. See post #6.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2018-09-22 14:52:58

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Re: Unable to get Bumblebee working

I tried.

But after installing bbswitch, if I run, 

 at /proc/acpi/bbswitch

it shows the error, 

 cat: /proc/acpi/bbswitch: No such file or directory

Offline

#12 2018-09-22 14:54:18

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,840

Re: Unable to get Bumblebee working

lsmod | grep bbswitch

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2018-09-22 15:12:47

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Re: Unable to get Bumblebee working

Tried that.

Still shows the same error, 

 cat: /proc/acpi/bbswitch: No such file or directory

Offline

#14 2018-09-22 15:14:03

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,840

Re: Unable to get Bumblebee working

Tried what?
Is the module loaded?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#15 2018-09-23 08:23:32

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Re: Unable to get Bumblebee working

I tried lsmod | grep bbswitch


Still it shows 

 cat: /proc/acpi/bbswitch: No such file or directory

Offline

#16 2018-09-23 09:03:44

loqs
Member
Registered: 2014-03-06
Posts: 19,113

Re: Unable to get Bumblebee working

thewhitewolf17 wrote:

I tried lsmod | grep bbswitch

What do you understand this command is doing?

Offline

#17 2018-09-23 09:09:01

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Re: Unable to get Bumblebee working

I am a newbie, but afaik, it loads the kernel module, bbswitch.

Offline

#18 2018-09-23 09:27:36

loqs
Member
Registered: 2014-03-06
Posts: 19,113

Re: Unable to get Bumblebee working

It does not load anything.  lsmod lists loaded modules the output is then piped to grep which outputs lines containing bbswitch.
If the above has no output then bbswitch is not loaded and seth expect you to post that the above produced no output.
Edit:
What have you installed that is supposed to supply the bbswitch module?

Last edited by loqs (2018-09-23 09:30:45)

Offline

#19 2018-09-23 11:37:02

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Re: Unable to get Bumblebee working

Thanks for clarifying that.

And I installed the bbswitch package using pacman by using : 

 sudo pacman -S bbswitch

Offline

#20 2018-09-23 11:41:13

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,840

Re: Unable to get Bumblebee working

https://wiki.archlinux.org/index.php/Bumblebee#Power_management wrote:

To run bbswitch without bumblebeed on system startup, do not forget to add bbswitch to /etc/modules-load.d.

Also read (all of it) https://wiki.archlinux.org/index.php/Kernel_module

In general, you're supposed to understand what you do. So if you're confroned w/ a statement you do not actually understand, you consult the manpage or the arch wiki. If there're still open questions, feel free to ask back.
Otherwise some dude might one day tell you to "sudo dd if=/dev/zero of=/dev/sda" to fix all your problems…

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#21 2018-09-23 12:57:15

thewhitewolf17
Member
Registered: 2018-08-30
Posts: 12

Re: Unable to get Bumblebee working

I read it and tried, but now when I try

 modprobe bbswitch

it returns, 

 modprobe: ERROR: could not insert 'bbswitch': Exec format error

Offline

#22 2018-09-23 13:47:47

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,840

Re: Unable to get Bumblebee working

You're running an incomaptible kernel

uname -a

In doubt, you'll have to use the dkms package.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB