You are not logged in.
- Topics: Active | Unanswered
#1 2018-09-26 22:49:43
- cj360
- Member
- Registered: 2013-10-12
- Posts: 67
[Solved] Only 1 audio sink detected when there is more
So my monitor has its own speakers and those work as hdmi-ouput but I also have a headset with detachable microphone and the speakers on the headset arn't even listed in
pacmd list-sinksjust the speakers in the monitor.
$ pacmd list-sinks:
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_26_00.1.hdmi-stereo-extra1>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9030
volume: front-left: 29489 / 45% / -20.81 dB, front-right: 29489 / 45% / -20.81 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 0 <alsa_card.pci-0000_26_00.1>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 1"
alsa.id = "HDMI 1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "7"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 40"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:26:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "10f0"
device.product.name = "GP104 High Definition Audio Controller"
device.string = "hdmi:0,1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo-extra1"
device.profile.description = "Digital Stereo (HDMI 2)"
device.description = "GP104 High Definition Audio Controller Digital Stereo (HDMI 2)"
alsa.mixer_name = "Nvidia GPU 83 HDMI/DP"
alsa.components = "HDA:10de0083,10de119d,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "NS-PMG248
"
active port: <hdmi-output-1>Headset has no issues on Windows so it shouldn't be faulty (I hope). From reading the pulseaudio wiki page the headset should be detected the same as the monitor's speakers. Is there something else I need to define to allow audio through both devices? (One or the other not both.)
Could it be my
.config/pulse/default.paonly containing
.include /etc/pulse/default.pasince I'm not sure if I need other values set there.
Last edited by cj360 (2018-09-28 20:03:52)
Offline
#2 2018-09-27 07:38:46
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,435
Re: [Solved] Only 1 audio sink detected when there is more
What kind of speakers? USB or audio jack? did you disable the actual card on pulseaudio? what are the outputs of
aplay -lL
pacmd list-cardsOffline
#3 2018-09-27 15:23:23
- cj360
- Member
- Registered: 2013-10-12
- Posts: 67
Re: [Solved] Only 1 audio sink detected when there is more
Its a headset the system treats it the same as speakers right?
Its connected to the audio jack with a split cable into the audio & mic port of the motherboard.
$ aplay -lL
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output
surround21:CARD=Generic
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic
4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0$ pacmd list-cards
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_26_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 41"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:26:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "10f0"
device.product.name = "GP104 High Definition Audio Controller"
device.string = "0"
device.description = "GP104 High Definition Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: unknown)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
off: Off (priority 0, available: unknown)
active profile: <output:hdmi-stereo-extra1>
sinks:
alsa_output.pci-0000_26_00.1.hdmi-stereo-extra1/#0: GP104 High Definition Audio Controller Digital Stereo (HDMI 2)
sources:
alsa_output.pci-0000_26_00.1.hdmi-stereo-extra1.monitor/#0: Monitor of GP104 High Definition Audio Controller Digital Stereo (HDMI 2)
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "NS-PMG248
"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"Offline
#4 2018-09-28 08:53:49
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,435
Re: [Solved] Only 1 audio sink detected when there is more
Yeah your normal card is gone, or incorrectly detected, do you have any .asoundrc or are you adjusting audio related module parameters in /etc/modprobe.d ? Can you post
lspci -k | grep -A3 Audio
dmesgLast edited by V1del (2018-09-28 08:55:27)
Offline
#5 2018-09-28 14:04:32
- cj360
- Member
- Registered: 2013-10-12
- Posts: 67
Re: [Solved] Only 1 audio sink detected when there is more
$ lspci -k | grep -A3 Audio
26:00.1 Audio device: NVIDIA Corporation GP104 High Definition Audio Controller (rev a1)
Subsystem: NVIDIA Corporation GP104 High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
27:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device 145a
--
28:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller
Subsystem: ASRock Incorporation Family 17h (Models 00h-0fh) HD Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel$ dmesg
[ 0.000000] Linux version 4.14.72-1-lts (builduser@andyrtr) (gcc version 8.2.1 20180831 (GCC)) #1 SMP Wed Sep 26 12:31:03 CEST 2018
[ 0.000000] Command line: \\vmlinuz-linux-lts ro root=UUID=e96cbb77-409e-4a4e-b0b1-9ab6106ae356 initrd=\initramfs-linux-lts.img
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dac65fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dac66000-0x00000000dc151fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dc152000-0x00000000dc246fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dc247000-0x00000000dc61dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dc61e000-0x00000000dd081fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd082000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xcad5b018-0xcad6b857] usable ==> usable
[ 0.000000] e820: update [mem 0xcad5b018-0xcad6b857] usable ==> usable
[ 0.000000] e820: update [mem 0xcad3b018-0xcad5aa57] usable ==> usable
[ 0.000000] e820: update [mem 0xcad3b018-0xcad5aa57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009cfffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a20a000-0x000000000affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000cad3b017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cad3b018-0x00000000cad5aa57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cad5aa58-0x00000000cad5b017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cad5b018-0x00000000cad6b857] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cad6b858-0x00000000dac65fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dac66000-0x00000000dc151fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dc152000-0x00000000dc246fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dc247000-0x00000000dc61dfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000dc61e000-0x00000000dd081fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dd082000-0x00000000deffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041f37ffff] usable
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xdc247000 ACPI=0xdc247000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 ESRT=0xd96ed418 MEMATTR=0xd9469018
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Gaming-ITX/ac, BIOS P4.70 07/23/2018
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Using PIT calibration value
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000420000000 aka 16896M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x00000000d96ed418 to 0x00000000d96ed450.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880380096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x139630000, 0x139630fff] PGTABLE
[ 0.000000] BRK [0x139631000, 0x139631fff] PGTABLE
[ 0.000000] BRK [0x139632000, 0x139632fff] PGTABLE
[ 0.000000] BRK [0x139633000, 0x139633fff] PGTABLE
[ 0.000000] BRK [0x139634000, 0x139634fff] PGTABLE
[ 0.000000] BRK [0x139635000, 0x139635fff] PGTABLE
[ 0.000000] BRK [0x139636000, 0x139636fff] PGTABLE
[ 0.000000] BRK [0x139637000, 0x139637fff] PGTABLE
[ 0.000000] BRK [0x139638000, 0x139638fff] PGTABLE
[ 0.000000] BRK [0x139639000, 0x139639fff] PGTABLE
[ 0.000000] BRK [0x13963a000, 0x13963afff] PGTABLE
[ 0.000000] BRK [0x13963b000, 0x13963bfff] PGTABLE
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x7f847000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DC247000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DC2470A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DC24D8D0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170728/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000DC2471F0 0066DD (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DC606E00 000040
[ 0.000000] ACPI: APIC 0x00000000DC24D9E8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DC24DAC8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DC24DB10 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DC24DBB0 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000DC256848 001A58 (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x00000000DC2582A0 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000DC258E70 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DC258EA0 002C9B (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: MCFG 0x00000000DC25BB40 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: AAFT 0x00000000DC25BB80 000200 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DC25BD80 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DC25BDB8 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000DC25BDE0 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: BGRT 0x00000000DC25BE28 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: IVRS 0x00000000DC25BE60 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DC25BF30 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DC25D978 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
[ 0.000000] ACPI: WSMT 0x00000000DC25DA70 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041f37ffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009cfffff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.000000] node 0: [mem 0x000000000a20a000-0x000000000affffff]
[ 0.000000] node 0: [mem 0x000000000b020000-0x00000000dac65fff]
[ 0.000000] node 0: [mem 0x00000000dc152000-0x00000000dc246fff]
[ 0.000000] node 0: [mem 0x00000000dd082000-0x00000000deffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f37ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[ 0.000000] On node 0 totalpages: 4177102
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14055 pages used for memmap
[ 0.000000] DMA32 zone: 899503 pages, LIFO batch:31
[ 0.000000] Normal zone: 51150 pages used for memmap
[ 0.000000] Normal zone: 3273600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad3b000-0xcad3bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad5a000-0xcad5afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad5b000-0xcad5bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad6b000-0xcad6bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdac66000-0xdc151fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdc247000-0xdc61dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdc61e000-0xdd081fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd100000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x4cc with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff88079ec00000 s132504 r8192 d31336 u262144
[ 0.000000] pcpu-alloc: s132504 r8192 d31336 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4111807
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: \\vmlinuz-linux-lts ro root=UUID=e96cbb77-409e-4a4e-b0b1-9ab6106ae356 initrd=\initramfs-linux-lts.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16291596K/16708408K available (10252K kernel code, 1151K rwdata, 2840K rodata, 1412K init, 956K bss, 416812K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] ftrace: allocating 29154 entries in 114 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.000000] NR_IRQS: 8448, nr_irqs: 1096, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.010000] tsc: PIT calibration matches HPET. 1 loops
[ 0.010000] tsc: Detected 3193.827 MHz processor
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6387.65 BogoMIPS (lpj=31938270)
[ 0.010000] pid_max: default: 32768 minimum: 301
[ 0.010000] ACPI: Core revision 20170728
[ 0.025212] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.026018] Security Framework initialized
[ 0.026019] Yama: becoming mindful.
[ 0.028145] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.029319] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.029367] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.029402] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.029588] mce: CPU supports 23 MCE banks
[ 0.029606] LVT offset 1 assigned for vector 0xf9
[ 0.029676] LVT offset 2 assigned for vector 0xf4
[ 0.029687] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.029687] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.029689] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.029689] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.029690] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.029691] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.034261] Freeing SMP alternatives memory: 28K
[ 0.036035] smpboot: Max logical packages: 3
[ 0.040003] Switched APIC routing to physical flat.
[ 0.040785] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.150000] smpboot: CPU0: AMD Ryzen 5 1600 Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[ 0.150000] Performance Events: Fam17h core perfctr, AMD PMU driver.
[ 0.150000] ... version: 0
[ 0.150000] ... bit width: 48
[ 0.150000] ... generic registers: 6
[ 0.150000] ... value mask: 0000ffffffffffff
[ 0.150000] ... max period: 00007fffffffffff
[ 0.150000] ... fixed-purpose events: 0
[ 0.150000] ... event mask: 000000000000003f
[ 0.150000] Hierarchical SRCU implementation.
[ 0.150000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.150000] smp: Bringing up secondary CPUs ...
[ 0.150000] x86: Booting SMP configuration:
[ 0.150000] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.162325] smp: Brought up 1 node, 12 CPUs
[ 0.162325] smpboot: Total of 12 processors activated (76651.84 BogoMIPS)
[ 0.162325] devtmpfs: initialized
[ 0.162325] x86/mm: Memory block size: 128MB
[ 0.162325] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
[ 0.162325] PM: Registering ACPI NVS region [mem 0xdc247000-0xdc61dfff] (4026368 bytes)
[ 0.162325] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.162325] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.162325] pinctrl core: initialized pinctrl subsystem
[ 0.162325] RTC time: 14:07:16, date: 09/28/18
[ 0.162325] NET: Registered protocol family 16
[ 0.162325] cpuidle: using governor ladder
[ 0.162325] cpuidle: using governor menu
[ 0.162325] ACPI: bus type PCI registered
[ 0.162325] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.162325] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.162325] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.162325] PCI: Using configuration type 1 for base access
[ 0.170599] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.170599] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.170599] ACPI: Added _OSI(Module Device)
[ 0.170599] ACPI: Added _OSI(Processor Device)
[ 0.170599] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.170599] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.170599] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.174085] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.175869] ACPI: Interpreter enabled
[ 0.175881] ACPI: (supports S0 S3 S4 S5)
[ 0.175881] ACPI: Using IOAPIC for interrupt routing
[ 0.176057] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.176231] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.182065] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.182069] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.182211] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.182219] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.182425] PCI host bridge to bus 0000:00
[ 0.182427] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.182428] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.182429] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.182430] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.182431] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.182431] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.182432] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[ 0.182433] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.182435] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.182440] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[ 0.182504] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[ 0.182585] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 0.182640] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[ 0.183056] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[ 0.183123] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[ 0.183189] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[ 0.183242] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[ 0.183361] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.183442] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[ 0.183511] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[ 0.183562] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[ 0.183589] pci 0000:00:07.1: enabling Extended Tags
[ 0.184018] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.184086] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 0.184137] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[ 0.184165] pci 0000:00:08.1: enabling Extended Tags
[ 0.184237] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.184341] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.184541] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.184746] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[ 0.184787] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[ 0.184828] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[ 0.184870] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[ 0.184911] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[ 0.184952] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[ 0.184992] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[ 0.185032] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[ 0.185155] pci 0000:03:00.0: [1022:43bb] type 00 class 0x0c0330
[ 0.185176] pci 0000:03:00.0: reg 0x10: [mem 0xf77a0000-0xf77a7fff 64bit]
[ 0.185248] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.185303] pci 0000:03:00.1: [1022:43b7] type 00 class 0x010601
[ 0.185347] pci 0000:03:00.1: reg 0x24: [mem 0xf7780000-0xf779ffff]
[ 0.185354] pci 0000:03:00.1: reg 0x30: [mem 0xf7700000-0xf777ffff pref]
[ 0.185389] pci 0000:03:00.1: PME# supported from D3hot D3cold
[ 0.185428] pci 0000:03:00.2: [1022:43b2] type 01 class 0x060400
[ 0.185497] pci 0000:03:00.2: PME# supported from D3hot D3cold
[ 0.210027] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[ 0.210031] pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
[ 0.210033] pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff]
[ 0.210124] pci 0000:1d:00.0: [1022:43b4] type 01 class 0x060400
[ 0.210210] pci 0000:1d:00.0: PME# supported from D3hot D3cold
[ 0.210275] pci 0000:1d:01.0: [1022:43b4] type 01 class 0x060400
[ 0.210359] pci 0000:1d:01.0: PME# supported from D3hot D3cold
[ 0.210416] pci 0000:1d:04.0: [1022:43b4] type 01 class 0x060400
[ 0.210496] pci 0000:1d:04.0: PME# supported from D3hot D3cold
[ 0.210553] pci 0000:1d:05.0: [1022:43b4] type 01 class 0x060400
[ 0.210633] pci 0000:1d:05.0: PME# supported from D3hot D3cold
[ 0.210690] pci 0000:1d:06.0: [1022:43b4] type 01 class 0x060400
[ 0.210770] pci 0000:1d:06.0: PME# supported from D3hot D3cold
[ 0.210828] pci 0000:1d:07.0: [1022:43b4] type 01 class 0x060400
[ 0.210909] pci 0000:1d:07.0: PME# supported from D3hot D3cold
[ 0.210975] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[ 0.210980] pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
[ 0.210982] pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf76fffff]
[ 0.211015] pci 0000:1d:00.0: PCI bridge to [bus 1e]
[ 0.211054] pci 0000:1d:01.0: PCI bridge to [bus 1f]
[ 0.211097] pci 0000:1d:04.0: PCI bridge to [bus 22]
[ 0.211137] pci 0000:1d:05.0: PCI bridge to [bus 23]
[ 0.211203] pci 0000:24:00.0: [8086:24fb] type 00 class 0x028000
[ 0.211264] pci 0000:24:00.0: reg 0x10: [mem 0xf7600000-0xf7601fff 64bit]
[ 0.211462] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
[ 0.240047] pci 0000:1d:06.0: PCI bridge to [bus 24]
[ 0.240055] pci 0000:1d:06.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 0.240124] pci 0000:25:00.0: [8086:1539] type 00 class 0x020000
[ 0.240169] pci 0000:25:00.0: reg 0x10: [mem 0xf7500000-0xf751ffff]
[ 0.240202] pci 0000:25:00.0: reg 0x18: [io 0xf000-0xf01f]
[ 0.240219] pci 0000:25:00.0: reg 0x1c: [mem 0xf7520000-0xf7523fff]
[ 0.240383] pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
[ 0.270043] pci 0000:1d:07.0: PCI bridge to [bus 25]
[ 0.270050] pci 0000:1d:07.0: bridge window [io 0xf000-0xffff]
[ 0.270054] pci 0000:1d:07.0: bridge window [mem 0xf7500000-0xf75fffff]
[ 0.270204] pci 0000:26:00.0: [10de:1b82] type 00 class 0x030000
[ 0.270232] pci 0000:26:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.270246] pci 0000:26:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.270259] pci 0000:26:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.270268] pci 0000:26:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.270277] pci 0000:26:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.270295] pci 0000:26:00.0: BAR 3: assigned to efifb
[ 0.270431] pci 0000:26:00.1: [10de:10f0] type 00 class 0x040300
[ 0.270450] pci 0000:26:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.300030] pci 0000:00:03.1: PCI bridge to [bus 26]
[ 0.300034] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.300037] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.300040] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.300246] pci 0000:27:00.0: [1022:145a] type 00 class 0x130000
[ 0.300273] pci 0000:27:00.0: enabling Extended Tags
[ 0.300337] pci 0000:27:00.2: [1022:1456] type 00 class 0x108000
[ 0.300351] pci 0000:27:00.2: reg 0x18: [mem 0xf7300000-0xf73fffff]
[ 0.300358] pci 0000:27:00.2: reg 0x24: [mem 0xf7400000-0xf7401fff]
[ 0.300364] pci 0000:27:00.2: enabling Extended Tags
[ 0.300426] pci 0000:27:00.3: [1022:145c] type 00 class 0x0c0330
[ 0.300438] pci 0000:27:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
[ 0.300456] pci 0000:27:00.3: enabling Extended Tags
[ 0.300480] pci 0000:27:00.3: PME# supported from D0 D3hot D3cold
[ 0.300533] pci 0000:00:07.1: PCI bridge to [bus 27]
[ 0.300536] pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
[ 0.300597] pci 0000:28:00.0: [1022:1455] type 00 class 0x130000
[ 0.300624] pci 0000:28:00.0: enabling Extended Tags
[ 0.300681] pci 0000:28:00.2: [1022:7901] type 00 class 0x010601
[ 0.300708] pci 0000:28:00.2: reg 0x24: [mem 0xf7808000-0xf7808fff]
[ 0.300715] pci 0000:28:00.2: enabling Extended Tags
[ 0.300742] pci 0000:28:00.2: PME# supported from D3hot D3cold
[ 0.300780] pci 0000:28:00.3: [1022:1457] type 00 class 0x040300
[ 0.300790] pci 0000:28:00.3: reg 0x10: [mem 0xf7800000-0xf7807fff]
[ 0.300808] pci 0000:28:00.3: enabling Extended Tags
[ 0.300833] pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
[ 0.300888] pci 0000:00:08.1: PCI bridge to [bus 28]
[ 0.300891] pci 0000:00:08.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.301114] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.301155] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.301190] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.301233] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.301273] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.301306] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.301339] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.301372] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.301779] pci 0000:26:00.0: vgaarb: setting as boot VGA device
[ 0.301779] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.301779] pci 0000:26:00.0: vgaarb: bridge control possible
[ 0.301779] vgaarb: loaded
[ 0.301779] EDAC MC: Ver: 3.0.0
[ 0.301779] Registered efivars operations
[ 0.316946] PCI: Using ACPI for IRQ routing
[ 0.316946] PCI: pci_cache_line_size set to 64 bytes
[ 0.316946] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[ 0.316946] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.316946] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.316946] e820: reserve RAM buffer [mem 0xcad3b018-0xcbffffff]
[ 0.316946] e820: reserve RAM buffer [mem 0xcad5b018-0xcbffffff]
[ 0.316946] e820: reserve RAM buffer [mem 0xdac66000-0xdbffffff]
[ 0.316946] e820: reserve RAM buffer [mem 0xdc247000-0xdfffffff]
[ 0.316946] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.316946] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[ 0.316946] NetLabel: Initializing
[ 0.316946] NetLabel: domain hash size = 128
[ 0.316946] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.316946] NetLabel: unlabeled traffic allowed by default
[ 0.316946] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.320003] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.322174] clocksource: Switched to clocksource hpet
[ 0.328970] VFS: Disk quotas dquot_6.6.0
[ 0.328988] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.329030] pnp: PnP ACPI init
[ 0.329113] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.329117] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.329162] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.329165] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.329218] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.329360] system 00:03: [io 0x0280-0x028f] has been reserved
[ 0.329361] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.329363] system 00:03: [io 0x02a0-0x02af] has been reserved
[ 0.329364] system 00:03: [io 0x02b0-0x02bf] has been reserved
[ 0.329366] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.329540] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.329541] system 00:04: [io 0x040b] has been reserved
[ 0.329542] system 00:04: [io 0x04d6] has been reserved
[ 0.329543] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.329544] system 00:04: [io 0x0c14] has been reserved
[ 0.329545] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.329546] system 00:04: [io 0x0c52] has been reserved
[ 0.329547] system 00:04: [io 0x0c6c] has been reserved
[ 0.329548] system 00:04: [io 0x0c6f] has been reserved
[ 0.329549] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
[ 0.329550] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
[ 0.329551] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.329551] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.329552] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.329555] system 00:04: [io 0x0800-0x089f] has been reserved
[ 0.329556] system 00:04: [io 0x0b00-0x0b0f] has been reserved
[ 0.329557] system 00:04: [io 0x0b20-0x0b3f] has been reserved
[ 0.329558] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.329559] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.329560] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.329561] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.329562] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.329564] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.329565] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.329566] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.329567] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.329569] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.329870] pnp: PnP ACPI: found 5 devices
[ 0.334537] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.334597] pci 0000:1d:00.0: PCI bridge to [bus 1e]
[ 0.334607] pci 0000:1d:01.0: PCI bridge to [bus 1f]
[ 0.334616] pci 0000:1d:04.0: PCI bridge to [bus 22]
[ 0.334625] pci 0000:1d:05.0: PCI bridge to [bus 23]
[ 0.334633] pci 0000:1d:06.0: PCI bridge to [bus 24]
[ 0.334637] pci 0000:1d:06.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 0.334643] pci 0000:1d:07.0: PCI bridge to [bus 25]
[ 0.334645] pci 0000:1d:07.0: bridge window [io 0xf000-0xffff]
[ 0.334648] pci 0000:1d:07.0: bridge window [mem 0xf7500000-0xf75fffff]
[ 0.334654] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[ 0.334656] pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
[ 0.334659] pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf76fffff]
[ 0.334665] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[ 0.334666] pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
[ 0.334668] pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff]
[ 0.334672] pci 0000:00:03.1: PCI bridge to [bus 26]
[ 0.334674] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.334676] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.334678] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.334682] pci 0000:00:07.1: PCI bridge to [bus 27]
[ 0.334684] pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
[ 0.334687] pci 0000:00:08.1: PCI bridge to [bus 28]
[ 0.334689] pci 0000:00:08.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.334693] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.334694] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.334695] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.334696] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.334697] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.334698] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.334699] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[ 0.334700] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[ 0.334701] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
[ 0.334701] pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf77fffff]
[ 0.334702] pci_bus 0000:1d: resource 0 [io 0xf000-0xffff]
[ 0.334703] pci_bus 0000:1d: resource 1 [mem 0xf7500000-0xf76fffff]
[ 0.334704] pci_bus 0000:24: resource 1 [mem 0xf7600000-0xf76fffff]
[ 0.334705] pci_bus 0000:25: resource 0 [io 0xf000-0xffff]
[ 0.334706] pci_bus 0000:25: resource 1 [mem 0xf7500000-0xf75fffff]
[ 0.334707] pci_bus 0000:26: resource 0 [io 0xe000-0xefff]
[ 0.334708] pci_bus 0000:26: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.334708] pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.334709] pci_bus 0000:27: resource 1 [mem 0xf7200000-0xf74fffff]
[ 0.334710] pci_bus 0000:28: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.334759] NET: Registered protocol family 2
[ 0.334883] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.335042] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.335172] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.335210] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.335250] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.335316] NET: Registered protocol family 1
[ 0.335463] pci 0000:26:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.335556] PCI: CLS 64 bytes, default 64
[ 0.335587] Unpacking initramfs...
[ 0.420566] Freeing initrd memory: 7904K
[ 0.420586] AMD-Vi: IOMMU performance counters supported
[ 0.420817] iommu: Adding device 0000:00:01.0 to group 0
[ 0.420947] iommu: Adding device 0000:00:01.3 to group 1
[ 0.421046] iommu: Adding device 0000:00:02.0 to group 2
[ 0.421148] iommu: Adding device 0000:00:03.0 to group 3
[ 0.421251] iommu: Adding device 0000:00:03.1 to group 4
[ 0.421349] iommu: Adding device 0000:00:04.0 to group 5
[ 0.421448] iommu: Adding device 0000:00:07.0 to group 6
[ 0.421553] iommu: Adding device 0000:00:07.1 to group 7
[ 0.421661] iommu: Adding device 0000:00:08.0 to group 8
[ 0.421761] iommu: Adding device 0000:00:08.1 to group 9
[ 0.421869] iommu: Adding device 0000:00:14.0 to group 10
[ 0.421881] iommu: Adding device 0000:00:14.3 to group 10
[ 0.422001] iommu: Adding device 0000:00:18.0 to group 11
[ 0.422013] iommu: Adding device 0000:00:18.1 to group 11
[ 0.422026] iommu: Adding device 0000:00:18.2 to group 11
[ 0.422036] iommu: Adding device 0000:00:18.3 to group 11
[ 0.422046] iommu: Adding device 0000:00:18.4 to group 11
[ 0.422056] iommu: Adding device 0000:00:18.5 to group 11
[ 0.422066] iommu: Adding device 0000:00:18.6 to group 11
[ 0.422076] iommu: Adding device 0000:00:18.7 to group 11
[ 0.422189] iommu: Adding device 0000:03:00.0 to group 12
[ 0.422208] iommu: Adding device 0000:03:00.1 to group 12
[ 0.422227] iommu: Adding device 0000:03:00.2 to group 12
[ 0.422236] iommu: Adding device 0000:1d:00.0 to group 12
[ 0.422246] iommu: Adding device 0000:1d:01.0 to group 12
[ 0.422255] iommu: Adding device 0000:1d:04.0 to group 12
[ 0.422265] iommu: Adding device 0000:1d:05.0 to group 12
[ 0.422274] iommu: Adding device 0000:1d:06.0 to group 12
[ 0.422284] iommu: Adding device 0000:1d:07.0 to group 12
[ 0.422303] iommu: Adding device 0000:24:00.0 to group 12
[ 0.422318] iommu: Adding device 0000:25:00.0 to group 12
[ 0.422432] iommu: Adding device 0000:26:00.0 to group 13
[ 0.422457] iommu: Adding device 0000:26:00.1 to group 13
[ 0.422553] iommu: Adding device 0000:27:00.0 to group 14
[ 0.422656] iommu: Adding device 0000:27:00.2 to group 15
[ 0.422758] iommu: Adding device 0000:27:00.3 to group 16
[ 0.422858] iommu: Adding device 0000:28:00.0 to group 17
[ 0.422957] iommu: Adding device 0000:28:00.2 to group 18
[ 0.423060] iommu: Adding device 0000:28:00.3 to group 19
[ 0.423309] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.423310] AMD-Vi: Extended features (0xf77ef22294ada):
[ 0.423311] PPR NX GT IA GA PC GA_vAPIC
[ 0.423314] AMD-Vi: Interrupt remapping enabled
[ 0.423314] AMD-Vi: virtual APIC enabled
[ 0.423562] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.424273] amd_uncore: AMD NB counters detected
[ 0.424277] amd_uncore: AMD LLC counters detected
[ 0.424922] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.424959] Scanning for low memory corruption every 60 seconds
[ 0.425467] Initialise system trusted keyrings
[ 0.425476] Key type blacklist registered
[ 0.425548] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.426204] zbud: loaded
[ 0.428284] Key type asymmetric registered
[ 0.428297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.428361] io scheduler noop registered
[ 0.428362] io scheduler deadline registered (default)
[ 0.428394] io scheduler cfq registered
[ 0.428395] io scheduler mq-deadline registered
[ 0.428395] io scheduler kyber registered
[ 0.428411] io scheduler bfq registered
[ 0.430020] NOHZ: local_softirq_pending 80
[ 0.430528] pcieport 0000:00:01.3: AER enabled with IRQ 26
[ 0.430545] pcieport 0000:00:03.1: AER enabled with IRQ 27
[ 0.430559] pcieport 0000:00:07.1: AER enabled with IRQ 28
[ 0.430573] pcieport 0000:00:08.1: AER enabled with IRQ 30
[ 0.430585] pcieport 0000:00:01.3: Signaling PME with IRQ 26
[ 0.430592] pcieport 0000:00:03.1: Signaling PME with IRQ 27
[ 0.430607] pcieport 0000:00:07.1: Signaling PME with IRQ 28
[ 0.430620] pcieport 0000:00:08.1: Signaling PME with IRQ 30
[ 0.430639] efifb: probing for efifb
[ 0.430647] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[ 0.430648] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.430648] efifb: scrolling: redraw
[ 0.430650] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.432019] Console: switching to colour frame buffer device 128x48
[ 0.433170] fb0: EFI VGA frame buffer device
[ 0.433189] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.433308] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.433384] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.433680] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.433807] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.433937] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.434076] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.434190] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.434317] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.434434] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.434550] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.434664] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.434832] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.436021] rtc_cmos 00:02: RTC can wake from S4
[ 0.436222] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.436273] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.436498] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.436535] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.436705] NET: Registered protocol family 10
[ 0.439182] Segment Routing with IPv6
[ 0.439192] NET: Registered protocol family 17
[ 0.439758] RAS: Correctable Errors collector initialized.
[ 0.440527] microcode: CPU0: patch_level=0x08001137
[ 0.440538] microcode: CPU1: patch_level=0x08001137
[ 0.440554] microcode: CPU2: patch_level=0x08001137
[ 0.440566] microcode: CPU3: patch_level=0x08001137
[ 0.440579] microcode: CPU4: patch_level=0x08001137
[ 0.440591] microcode: CPU5: patch_level=0x08001137
[ 0.440600] microcode: CPU6: patch_level=0x08001137
[ 0.440615] microcode: CPU7: patch_level=0x08001137
[ 0.440628] microcode: CPU8: patch_level=0x08001137
[ 0.440640] microcode: CPU9: patch_level=0x08001137
[ 0.440653] microcode: CPU10: patch_level=0x08001137
[ 0.440666] microcode: CPU11: patch_level=0x08001137
[ 0.440701] microcode: Microcode Update Driver: v2.2.
[ 0.440709] sched_clock: Marking stable (440696415, 0)->(603485471, -162789056)
[ 0.441056] registered taskstats version 1
[ 0.441060] Loading compiled-in X.509 certificates
[ 0.441076] zswap: loaded using pool lzo/zbud
[ 0.443082] Key type big_key registered
[ 0.443544] Magic number: 2:672:132
[ 0.443571] acpi PNP0C02:04: hash matches
[ 0.443586] acpi device:07: hash matches
[ 0.443689] rtc_cmos 00:02: setting system clock to 2018-09-28 14:07:17 UTC (1538143637)
[ 0.677675] Freeing unused kernel memory: 1412K
[ 0.760451] Write protecting the kernel read-only data: 16384k
[ 0.761730] Freeing unused kernel memory: 2016K
[ 0.764169] Freeing unused kernel memory: 1256K
[ 0.849186] ACPI: bus type USB registered
[ 0.849201] usbcore: registered new interface driver usbfs
[ 0.849207] usbcore: registered new interface driver hub
[ 0.849242] usbcore: registered new device driver usb
[ 0.850448] SCSI subsystem initialized
[ 0.853076] QUIRK: Enable AMD PLL fix
[ 0.853091] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.853095] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[ 0.853556] libata version 3.00 loaded.
[ 0.860041] NOHZ: local_softirq_pending 80
[ 0.870037] NOHZ: local_softirq_pending 80
[ 0.880036] NOHZ: local_softirq_pending 80
[ 0.890039] NOHZ: local_softirq_pending 80
[ 0.900047] NOHZ: local_softirq_pending 80
[ 0.908450] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x48000418
[ 0.908710] hub 1-0:1.0: USB hub found
[ 0.908726] hub 1-0:1.0: 10 ports detected
[ 0.909001] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.909004] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 0.909007] xhci_hcd 0000:03:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.909047] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.909167] hub 2-0:1.0: USB hub found
[ 0.909177] hub 2-0:1.0: 4 ports detected
[ 0.909245] usb: port power management may be unreliable
[ 0.909332] ahci 0000:03:00.1: version 3.0
[ 0.909416] xhci_hcd 0000:27:00.3: xHCI Host Controller
[ 0.909418] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 3
[ 0.909464] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[ 0.909498] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 0.909500] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.909526] xhci_hcd 0000:27:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
[ 0.909960] scsi host0: ahci
[ 0.910050] NOHZ: local_softirq_pending 80
[ 0.910136] hub 3-0:1.0: USB hub found
[ 0.910154] hub 3-0:1.0: 4 ports detected
[ 0.910284] scsi host1: ahci
[ 0.910360] xhci_hcd 0000:27:00.3: xHCI Host Controller
[ 0.910364] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 4
[ 0.910366] xhci_hcd 0000:27:00.3: Host supports USB 3.0 SuperSpeed
[ 0.910384] scsi host2: ahci
[ 0.910406] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.910485] scsi host3: ahci
[ 0.910541] hub 4-0:1.0: USB hub found
[ 0.910551] hub 4-0:1.0: 4 ports detected
[ 0.910573] scsi host4: ahci
[ 0.910683] scsi host5: ahci
[ 0.910843] scsi host6: ahci
[ 0.910923] scsi host7: ahci
[ 0.910947] ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 44
[ 0.910949] ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 44
[ 0.910949] ata3: DUMMY
[ 0.910950] ata4: DUMMY
[ 0.910951] ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 44
[ 0.910953] ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 44
[ 0.910953] ata7: DUMMY
[ 0.910954] ata8: DUMMY
[ 0.911129] ahci 0000:28:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.911131] ahci 0000:28:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.911341] scsi host8: ahci
[ 0.911381] ata9: SATA max UDMA/133 abar m4096@0xf7808000 port 0xf7808100 irq 47
[ 1.244267] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.272400] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.410463] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.410620] ata1.00: ATA-9: TOSHIBA-TR150, SAFZ12.3, max UDMA/133
[ 1.410623] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.410842] ata1.00: configured for UDMA/133
[ 1.411186] scsi 0:0:0:0: Direct-Access ATA TOSHIBA-TR150 12.3 PQ: 0 ANSI: 5
[ 1.430453] tsc: Refined TSC clocksource calibration: 3194.002 MHz
[ 1.430465] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a27ea444, max_idle_ns: 440795348232 ns
[ 1.450452] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[ 1.744321] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.960454] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 2.074645] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.232602] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.238682] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[ 2.238695] sd 0:0:0:0: [sda] Write Protect is off
[ 2.238696] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.238718] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.255961] sda: sda1 sda2 sda3 sda4
[ 2.256334] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.258123] usbcore: registered new interface driver usbhid
[ 2.258124] usbhid: USB HID core driver
[ 2.259081] hid-generic 0003:1038:1720.0001: hiddev0,hidraw0: USB HID v1.11 Device [SteelSeries SteelSeries Rival 310 eSports Mouse] on usb-0000:03:00.0-7/input0
[ 2.259226] input: SteelSeries SteelSeries Rival 310 eSports Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.1/0003:1038:1720.0002/input/input0
[ 2.259256] hid-generic 0003:1038:1720.0002: input,hidraw1: USB HID v1.11 Mouse [SteelSeries SteelSeries Rival 310 eSports Mouse] on usb-0000:03:00.0-7/input1
[ 2.259543] input: SteelSeries SteelSeries Rival 310 eSports Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.2/0003:1038:1720.0003/input/input1
[ 2.330302] hid-generic 0003:1038:1720.0003: input,hidraw2: USB HID v1.11 Keyboard [SteelSeries SteelSeries Rival 310 eSports Mouse] on usb-0000:03:00.0-7/input2
[ 2.380225] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[ 2.440743] clocksource: Switched to clocksource tsc
[ 2.570445] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.570582] ata6.00: ATA-9: Corsair Force LE SSD, SAFC12.2, max UDMA/133
[ 2.570584] ata6.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.570676] ata6.00: configured for UDMA/133
[ 2.570959] scsi 5:0:0:0: Direct-Access ATA Corsair Force LE 12.2 PQ: 0 ANSI: 5
[ 2.571240] sd 5:0:0:0: [sdb] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[ 2.571252] sd 5:0:0:0: [sdb] Write Protect is off
[ 2.571254] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.571270] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.572950] sdb: sdb1 sdb2 sdb3
[ 2.573386] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 2.584238] random: fast init done
[ 2.644414] NOHZ: local_softirq_pending 10
[ 2.645092] NOHZ: local_softirq_pending 10
[ 2.645186] NOHZ: local_softirq_pending 10
[ 2.652790] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.699238] input: Legonut Project Zen as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:CEEB:1256.0004/input/input2
[ 2.749374] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.755786] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.760211] hid-generic 0003:CEEB:1256.0004: input,hidraw3: USB HID v1.11 Keyboard [Legonut Project Zen] on usb-0000:03:00.0-10/input0
[ 2.779691] input: Legonut Project Zen as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.1/0003:CEEB:1256.0005/input/input3
[ 2.779751] hid-generic 0003:CEEB:1256.0005: input,hidraw4: USB HID v1.11 Mouse [Legonut Project Zen] on usb-0000:03:00.0-10/input1
[ 2.780670] systemd[1]: Detected architecture x86-64.
[ 2.785261] systemd[1]: Set hostname to <ryzen-a4>.
[ 2.798266] input: Legonut Project Zen as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.2/0003:CEEB:1256.0006/input/input4
[ 2.860223] hid-generic 0003:CEEB:1256.0006: input,hidraw5: USB HID v1.11 Device [Legonut Project Zen] on usb-0000:03:00.0-10/input2
[ 2.860437] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.860478] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.860563] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.860568] systemd[1]: Reached target Login Prompts.
[ 2.860605] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.861738] systemd[1]: Created slice system-getty.slice.
[ 2.861823] systemd[1]: Listening on udev Kernel Socket.
[ 2.861994] systemd[1]: Created slice User and Session Slice.
[ 2.862088] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.862175] systemd[1]: Listening on udev Control Socket.
[ 2.906628] EXT4-fs (sdb3): re-mounted. Opts: (null)
[ 2.927949] systemd-journald[303]: Received request to flush runtime journal from PID 1
[ 3.028949] acpi_cpufreq: overriding BIOS provided _PSD data
[ 3.035214] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 3.035236] ACPI: Power Button [PWRB]
[ 3.035367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 3.035394] ACPI: Power Button [PWRF]
[ 3.040520] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.061528] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 3.063493] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.063495] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 3.065553] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 3.065602] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59
[ 3.065604] sp5100_tco: I/O address 0x0cd6 already in use
[ 3.068230] dca service started, version 1.12.1
[ 3.071874] AVX2 version of gcm_enc/dec engaged.
[ 3.071876] AES CTR mode by8 optimization enabled
[ 3.072251] mousedev: PS/2 mouse device common for all mice
[ 3.075707] pps_core: LinuxPPS API ver. 1 registered
[ 3.075708] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.080315] ccp 0000:27:00.2: enabling device (0000 -> 0002)
[ 3.081248] ccp 0000:27:00.2: ccp enabled
[ 3.081250] ccp 0000:27:00.2: enabled
[ 3.081973] PTP clock support registered
[ 3.099011] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 3.099012] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.101277] ipmi message handler version 39.2
[ 3.102466] ipmi device interface
[ 3.105563] Linux agpgart interface v0.103
[ 3.147198] Adding 58055676k swap on /dev/sdb2. Priority:-2 extents:1 across:58055676k SSFS
[ 3.192774] snd_hda_intel 0000:26:00.1: Disabling MSI
[ 3.192787] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
[ 3.192842] snd_hda_intel 0000:28:00.3: enabling device (0000 -> 0002)
[ 3.193643] Bluetooth: Core ver 2.22
[ 3.193669] NET: Registered protocol family 31
[ 3.193671] Bluetooth: HCI device and connection manager initialized
[ 3.193675] Bluetooth: HCI socket layer initialized
[ 3.193679] Bluetooth: L2CAP socket layer initialized
[ 3.193687] Bluetooth: SCO socket layer initialized
[ 3.210919] Intel(R) Wireless WiFi driver for Linux
[ 3.210920] Copyright(c) 2003- 2015 Intel Corporation
[ 3.211001] iwlwifi 0000:24:00.0: enabling device (0000 -> 0002)
[ 3.215798] iwlwifi 0000:24:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 3.216503] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 3.217050] usbcore: registered new interface driver btusb
[ 3.236107] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.250217] Bluetooth: hci0: read Intel version: 370810225019140f34
[ 3.250219] Bluetooth: hci0: Intel device is already patched. patch num: 34
[ 3.251766] kvm: disabled by bios
[ 3.260277] MCE: In-kernel MCE decoding enabled.
[ 3.264052] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.264054] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.280015] iwlwifi 0000:24:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
[ 3.297978] iwlwifi 0000:24:00.0: base HW address: 88:b1:11:6a:d2:77
[ 3.320950] nvidia: loading out-of-tree module taints kernel.
[ 3.320957] nvidia: module license 'NVIDIA' taints kernel.
[ 3.320958] Disabling lock debugging due to kernel taint
[ 3.356392] pps pps0: new PPS source ptp0
[ 3.356397] igb 0000:25:00.0: added PHC on eth0
[ 3.356399] igb 0000:25:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 3.356401] igb 0000:25:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:53:0a:fa
[ 3.356404] igb 0000:25:00.0: eth0: PBA No: FFFFFF-0FF
[ 3.356407] igb 0000:25:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 3.413272] igb 0000:25:00.0 enp37s0: renamed from eth0
[ 3.461447] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.461449] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.477237] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.477704] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.477760] thermal thermal_zone0: failed to read out thermal zone (-61)
[ 3.478972] nvidia-nvlink: Nvlink Core is being initialized, major device number 241
[ 3.479608] nvidia 0000:26:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.479755] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.54 Tue Aug 14 19:02:34 PDT 2018 (using threaded interrupts)
[ 3.480867] iwlwifi 0000:24:00.0 wlp36s0: renamed from wlan0
[ 3.501134] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.54 Tue Aug 14 23:08:44 PDT 2018
[ 3.503263] [drm] [nvidia-drm] [GPU ID 0x00002600] Loading driver
[ 3.503265] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:26:00.0 on minor 0
[ 5.068863] nct6775: Found NCT6792D or compatible chip at 0x2e:0x290
[ 5.297140] random: crng init done
[ 5.297141] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.361026] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input8
[ 5.361124] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input9
[ 5.361209] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input10
[ 5.361290] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input11
[ 5.841794] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 5.841921] caller _nv001112rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
[ 6.341610] IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
[ 6.372559] IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
[ 6.375045] IPv6: ADDRCONF(NETDEV_UP): wlp36s0: link is not ready
[ 6.439571] IPv6: ADDRCONF(NETDEV_UP): wlp36s0: link is not ready
[ 6.518524] IPv6: ADDRCONF(NETDEV_UP): wlp36s0: link is not ready
[ 6.667733] IPv6: ADDRCONF(NETDEV_UP): wlp36s0: link is not ready
[ 7.552772] fuse init (API version 7.26)
[ 9.151026] igb 0000:25:00.0 enp37s0: igb: enp37s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 9.151363] IPv6: ADDRCONF(NETDEV_CHANGE): enp37s0: link becomes readyLast edited by cj360 (2018-09-28 14:10:14)
Offline
#6 2018-09-28 15:13:03
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,435
Re: [Solved] Only 1 audio sink detected when there is more
Don't use the LTS kernel if you are having hardware detection issues. Chances are that relevant support isn't included there. 4.14 is from that standpoint a year old. Does it get detected correctly on the latest kernel?
Offline
#7 2018-09-28 19:32:27
- cj360
- Member
- Registered: 2013-10-12
- Posts: 67
Re: [Solved] Only 1 audio sink detected when there is more
I was using the lts kernel since it doesn't have the patches for bpfilter that atm cause a slight hang in shutting down/rebooting. Following is with linux installed and rebooted.
$ dmesg | grep -i hda
[ 3.454537] snd_hda_intel 0000:26:00.1: Disabling MSI
[ 3.454553] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
[ 3.454878] snd_hda_intel 0000:28:00.3: enabling device (0000 -> 0002)
[ 4.183929] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input10
[ 4.183973] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input11
[ 4.184015] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input12
[ 4.184049] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input13$ lspci -k | grep -A3 Audio
26:00.1 Audio device: NVIDIA Corporation GP104 High Definition Audio Controller (rev a1)
Subsystem: NVIDIA Corporation GP104 High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
27:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device 145a
--
28:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller
Subsystem: ASRock Incorporation Family 17h (Models 00h-0fh) HD Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
surround21:CARD=Generic
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic
4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output$ lspci | grep -i Audio
26:00.1 Audio device: NVIDIA Corporation GP104 High Definition Audio Controller (rev a1)
28:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio ControllerSo I'm not seeing which thread I found it from, but it was either another thread in newbie corner or kernel & hardware but I've found a solution.
Creating
/etc/modprobe.d/sound.confwith
options snd_hda_intel model=autothe motherboard sound card is picked up and configurable. Just in case anyone else finds this this was on a Asrock b350 itx motherboard.
Last edited by cj360 (2018-09-28 20:03:32)
Offline