You are not logged in.
Hello dear community.
First of all, sorry, (Arch)linux is kinda new for me, but I've became really a new fan of it and been using it daily.
After searching some days I couldn't figure my problems really, so if you can help me to.. Help me, I would be grateful.
I'll do everything on my side to provide much information I can.
My problems on my MSI GT72S 6QE Dominator Pro G laptop are:
1) Wrong pulseaudio output for headphones:
When I'm plugging my headphones, the output seems to work only on S/PDIF.
Headphones are detected fine, but I always need to go on the audio panel to change to S/PDIF so my headphones can work properly.
Is there a way to set it by default when plugging headphones?
Headphones are also working on Analog Stereo Duplex/Analog Stereo Output if I switch on the element IEC958 from /usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf , but the sound is just too loud.
I've tried to play with some things, volume-limit, volume = ignore inside those configurations, also ignore_dB=1 inside the default.pa config inside /etc/pulse but nothing seemed to work properly, for example, speakers would be muted / or not switched to speakers when unplugging headphones.
Here some information that you may need:
pacmd list ->
Memory blocks currently allocated: 6, size: 229.8 KiB.
Memory blocks allocated during the whole lifetime: 602131, size: 417.9 MiB.
Memory blocks imported from other processes: 0, size: 0 B.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 11.5 KiB.
Default sample spec: float32le 2ch 192000Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1f.3.analog-stereo
Default source name: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
Memory blocks of type POOL: 4 allocated/388112 accumulated.
Memory blocks of type POOL_EXTERNAL: 2 allocated/183627 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/183722 accumulated.
Memory blocks of type IMPORTED: 0 allocated/30297 accumulated.
24 module(s) loaded.
index: 0
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "12.2"
index: 1
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "12.2"
index: 2
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "12.2"
index: 3
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "12.2"
index: 4
name: <module-switch-on-port-available>
argument: <>
used: -1
load once: yes
properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "12.2"
index: 5
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "12.2"
index: 6
name: <module-alsa-card>
argument: <device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
used: 0
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.2"
index: 7
name: <module-alsa-card>
argument: <device_id="0" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
used: 2
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.2"
index: 8
name: <module-dbus-protocol>
argument: <>
used: -1
load once: yes
properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "12.2"
index: 9
name: <module-esound-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "12.2"
index: 10
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "12.2"
index: 11
name: <module-gsettings>
argument: <>
used: -1
load once: yes
properties:
module.author = "Sylvain Baubeau"
module.description = "GSettings Adapter"
module.version = "12.2"
index: 12
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "12.2"
index: 13
name: <module-rescue-streams>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "12.2"
index: 14
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "12.2"
index: 15
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "12.2"
index: 16
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "12.2"
index: 17
name: <module-console-kit>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "12.2"
index: 18
name: <module-systemd-login>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "12.2"
index: 19
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "12.2"
index: 20
name: <module-role-cork>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "12.2"
index: 21
name: <module-filter-heuristics>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "12.2"
index: 22
name: <module-filter-apply>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "12.2"
index: 24
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "12.2"
1 sink(s) available.
* index: 2
name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause: (none)
priority: 9039
volume: front-left: 15073 / 23% / -38.30 dB, front-right: 15073 / 23% / -38.30 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 35.95 ms
max request: 60 KiB
max rewind: 60 KiB
monitor source: 2
sample spec: s32le 2ch 192000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1f.3>
module: 7
properties:
alsa.resolution_bits = "32"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC898 Analog"
alsa.id = "ALC898 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xda120000 irq 142"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a170"
device.product.name = "Sunrise Point-H HD Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "3072000"
device.buffering.fragment_size = "1536000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC898"
alsa.components = "HDA:10ec0899,14621180,00100003"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
properties:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-headphones>
1 source(s) available.
* index: 2
name: <alsa_output.pci-0000_00_1f.3.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 1030
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 60 KiB
sample spec: s32le 2ch 192000Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 2
card: 1 <alsa_card.pci-0000_00_1f.3>
module: 7
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xda120000 irq 142"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a170"
device.product.name = "Sunrise Point-H HD Audio"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
6 client(s) logged in.
index: 0
driver: <module-systemd-login.c>
owner module: 18
properties:
application.name = "Login Session 1"
systemd-login.session = "1"
index: 1
driver: <protocol-native.c>
owner module: 10
properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "771"
application.process.user = "kamay"
application.process.host = "archlinux"
application.process.binary = "plasmashell"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7ce75882fe414a4d9958f200d5ad68fc"
application.process.session_id = "1"
index: 2
driver: <protocol-native.c>
owner module: 10
properties:
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "2976"
application.process.user = "kamay"
application.process.host = "archlinux"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7ce75882fe414a4d9958f200d5ad68fc"
application.process.session_id = "1"
index: 3
driver: <protocol-native.c>
owner module: 10
properties:
application.name = "QPulse"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "771"
application.process.user = "kamay"
application.process.host = "archlinux"
application.process.binary = "plasmashell"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7ce75882fe414a4d9958f200d5ad68fc"
application.process.session_id = "1"
index: 4
driver: <protocol-native.c>
owner module: 10
properties:
application.name = "Chrome input"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "3835"
application.process.user = "kamay"
application.process.host = "archlinux"
application.process.binary = "chrome"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7ce75882fe414a4d9958f200d5ad68fc"
application.process.session_id = "1"
index: 16
driver: <cli.c>
owner module: 24
properties:
application.name = "UNIX socket client"
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xdc080000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0fbb"
device.product.name = "GM204 High Definition Audio Controller"
device.string = "1"
device.description = "GM204 High Definition Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
off: Off (priority 0, available: unknown)
active profile: <off>
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.pci-0000_00_1f.3>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xda120000 irq 142"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a170"
device.product.name = "Sunrise Point-H HD Audio"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
output:analog-surround-40: Analog Surround 4.0 Output (priority 1200, available: no)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 1265, available: unknown)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5565, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo>
sinks:
alsa_output.pci-0000_00_1f.3.analog-stereo/#2: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#2: Monitor of Built-in Audio Analog Stereo
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
properties:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
0 sink input(s) available.
1 source output(s) available.
index: 12
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 2 <alsa_output.pci-0000_00_1f.3.analog-stereo.monitor>
volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
muted: no
current latency: 20.69 ms
requested latency: 40.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 10
client: 2 <PulseAudio Volume Control>
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "2976"
application.process.user = "kamay"
application.process.host = "archlinux"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7ce75882fe414a4d9958f200d5ad68fc"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
1 cache entrie(s) available.
name: <audio-volume-change>
index: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
length: 11776
duration: 0.1 s
volume: n/a
balance 0.00
lazy: no
filename: <n/a>
properties:
media.role = "event"
event.id = "audio-volume-change"
event.description = "Volume Control Feedback Sound"
media.name = "audio-volume-change"
media.filename = "/usr/share/sounds/freedesktop/stereo/audio-volume-change.oga"
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "771"
application.process.user = "kamay"
application.process.host = "archlinux"
application.process.binary = "plasmashell"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7ce75882fe414a4d9958f200d5ad68fc"
application.process.session_id = "1"2) Black screen after hibernating, I didn't try much on this, I've just discovered it recently.
Thanks for your answers in advance everyone.
Last edited by xutaxkamay (2018-10-25 13:11:13)
Offline