You are not logged in.
Running `xinit` causes the terminal to hang, with the cursor (caret?) not blinking. The computer I am using is an MSI-GF62 8RC, with a Nvidia GTX 1050 Mobile and an Intel core i5 8th gen.
I have installed `nvidia-beta` from the AUR and ran `nvidia-xconfig` (logs of what it produced can be found at the end)
Originally, running `lspci` would hang in a similar way, so I have started it from Grub with the option:
modprobe.blacklist=nouveauwhich worked. After I installed `nvidia-beta` it worked regardless of that boot option (I'm assuming this is because now nvidia was being used instead of nouveau and thus no need to blacklist it, however I don't know much about kernel drivers so it's only a guess).
Here are logs:
`lspci -k | grep -A 2 -E "(VGA|3D)"`
00:02.0 VGA compatible controller: Intel Corporation Device 3e9b
DeviceName: Onboard - Video
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1221
--
01:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile] (rev a1)
Subsystem: Micro-Star International Co., Ltd. [MSI] GP107M [GeForce GTX 1050 Mobile]
Kernel driver in use: nvidia`Xorg.0.log`
[ 415.304] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 415.305]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 415.305] Build Operating System: Linux Arch Linux
[ 415.305] Current Operating System: Linux msi-al 4.19.2-arch1-1-ARCH #1 SMP PREEMPT Tue Nov 13 21:16:19 UTC 2018 x86_64
[ 415.306] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9a94e6a4-cab4-4623-a6ed-77cbb95a7216 rw quiet
[ 415.306] Build Date: 25 October 2018 04:42:32PM
[ 415.306]
[ 415.306] Current version of pixman: 0.34.0
[ 415.306] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 415.306] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 415.325] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 19 14:38:35 2018
[ 415.376] (==) Using config file: "/etc/X11/xorg.conf"
[ 415.382] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 415.393] (==) ServerLayout "Layout0"
[ 415.393] (**) |-->Screen "Screen0" (0)
[ 415.393] (**) | |-->Monitor "Monitor0"
[ 415.394] (**) | |-->Device "Device0"
[ 415.395] (**) |-->Input Device "Keyboard0"
[ 415.395] (**) |-->Input Device "Mouse0"
[ 415.395] (==) Automatically adding devices
[ 415.395] (==) Automatically enabling devices
[ 415.395] (==) Automatically adding GPU devices
[ 415.395] (==) Automatically binding GPU devices
[ 415.395] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 415.413] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 415.413] Entry deleted from font path.
[ 415.413] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 415.413] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 415.413] Entry deleted from font path.
[ 415.413] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 415.413] Entry deleted from font path.
[ 415.413] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 415.413] Entry deleted from font path.
[ 415.425] (==) FontPath set to:
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 415.425] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 415.425] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 415.425] (WW) Disabling Keyboard0
[ 415.425] (WW) Disabling Mouse0
[ 415.425] (II) Module ABI versions:
[ 415.425] X.Org ANSI C Emulation: 0.4
[ 415.425] X.Org Video Driver: 24.0
[ 415.425] X.Org XInput driver : 24.1
[ 415.425] X.Org Server Extension : 10.0
[ 415.427] (++) using VT number 1
[ 415.432] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 415.433] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 415.435] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 415.435] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 415.436] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 415.439] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 415.439] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[ 415.441] (--) PCI: (0@0:2:0) 8086:3e9b:1462:1221 rev 0, Mem @ 0xa2000000/16777216, 0x80000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 415.441] (--) PCI:*(1@0:0:0) 10de:1c8d:1462:1221 rev 161, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 415.441] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 415.441] (II) LoadModule: "glx"
[ 415.457] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 415.506] (II) Module glx: vendor="X.Org Foundation"
[ 415.506] compiled for 1.20.3, module version = 1.0.0
[ 415.506] ABI class: X.Org Server Extension, version 10.0
[ 415.506] (II) LoadModule: "nvidia"
[ 415.506] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 415.544] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 415.544] compiled for 4.0.2, module version = 1.0.0
[ 415.544] Module class: X.Org Video Driver
[ 415.549] (II) NVIDIA dlloader X Driver 415.13 Wed Oct 31 18:52:35 CDT 2018
[ 415.549] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 415.550] (II) systemd-logind: releasing fd for 226:1
[ 415.555] (II) Loading sub module "fb"
[ 415.555] (II) LoadModule: "fb"
[ 415.555] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 415.563] (II) Module fb: vendor="X.Org Foundation"
[ 415.563] compiled for 1.20.3, module version = 1.0.0
[ 415.563] ABI class: X.Org ANSI C Emulation, version 0.4
[ 415.563] (II) Loading sub module "wfb"
[ 415.563] (II) LoadModule: "wfb"
[ 415.563] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 415.567] (II) Module wfb: vendor="X.Org Foundation"
[ 415.567] compiled for 1.20.3, module version = 1.0.0
[ 415.567] ABI class: X.Org ANSI C Emulation, version 0.4
[ 415.567] (II) Loading sub module "ramdac"
[ 415.567] (II) LoadModule: "ramdac"
[ 415.567] (II) Module "ramdac" already built-in
[ 415.569] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 415.569] (==) NVIDIA(0): RGB weight 888
[ 415.569] (==) NVIDIA(0): Default visual is TrueColor
[ 415.569] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 415.570] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 415.570] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 415.570] (**) NVIDIA(0): Enabling 2D acceleration
[ 415.570] (II) Loading sub module "glxserver_nvidia"
[ 415.570] (II) LoadModule: "glxserver_nvidia"
[ 415.570] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 415.908] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 415.908] compiled for 4.0.2, module version = 1.0.0
[ 415.908] Module class: X.Org Server Extension
[ 415.915] (II) NVIDIA GLX Module 415.13 Wed Oct 31 18:52:02 CDT 2018
[ 418.532] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 (GP107-A) at PCI:1:0:0 (GPU-0)
[ 418.532] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 418.532] (--) NVIDIA(0): VideoBIOS: 86.07.50.00.0b
[ 418.532] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 418.532] (II) NVIDIA(0): Validated MetaModes:
[ 418.532] (II) NVIDIA(0): "NULL"
[ 418.532] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 418.532] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 418.532] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 418.532] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[ 418.532] (II) NVIDIA: access.
[ 418.536] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 418.536] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 418.536] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 418.536] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 418.536] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 418.536] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 418.536] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 418.536] (II) NVIDIA(0): Config Options in the README.
[ 418.562] (II) NVIDIA(0): Setting mode "NULL"
[ 418.569] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 418.569] (==) NVIDIA(0): Backing store enabled
[ 418.569] (==) NVIDIA(0): Silken mouse disabled
[ 418.569] (**) NVIDIA(0): DPMS enabled
[ 418.579] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 418.579] (II) Loading sub module "dri2"
[ 418.579] (II) LoadModule: "dri2"
[ 418.579] (II) Module "dri2" already built-in
[ 418.579] (II) NVIDIA(0): [DRI2] Setup complete
[ 418.579] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 418.580] (II) Initializing extension Generic Event Extension
[ 418.580] (II) Initializing extension SHAPE
[ 418.580] (II) Initializing extension MIT-SHM
[ 418.580] (II) Initializing extension XInputExtension
[ 418.580] (II) Initializing extension XTEST
[ 418.580] (II) Initializing extension BIG-REQUESTS
[ 418.580] (II) Initializing extension SYNC
[ 418.580] (II) Initializing extension XKEYBOARD
[ 418.580] (II) Initializing extension XC-MISC
[ 418.580] (II) Initializing extension SECURITY
[ 418.580] (II) Initializing extension XFIXES
[ 418.580] (II) Initializing extension RENDER
[ 418.580] (II) Initializing extension RANDR
[ 418.580] (II) Initializing extension COMPOSITE
[ 418.580] (II) Initializing extension DAMAGE
[ 418.580] (II) Initializing extension MIT-SCREEN-SAVER
[ 418.580] (II) Initializing extension DOUBLE-BUFFER
[ 418.580] (II) Initializing extension RECORD
[ 418.580] (II) Initializing extension DPMS
[ 418.580] (II) Initializing extension Present
[ 418.580] (II) Initializing extension DRI3
[ 418.580] (II) Initializing extension X-Resource
[ 418.580] (II) Initializing extension XVideo
[ 418.580] (II) Initializing extension XVideo-MotionCompensation
[ 418.580] (II) Initializing extension GLX
[ 418.580] (II) Initializing extension GLX
[ 418.580] (II) Indirect GLX disabled.
[ 418.580] (II) GLX: Another vendor is already registered for screen 0
[ 418.580] (II) Initializing extension XFree86-VidModeExtension
[ 418.580] (II) Initializing extension XFree86-DGA
[ 418.580] (II) Initializing extension XFree86-DRI
[ 418.580] (II) Initializing extension DRI2
[ 418.580] (II) Initializing extension NV-GLX
[ 418.580] (II) Initializing extension NV-CONTROL
[ 419.058] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 419.058] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 419.058] (II) LoadModule: "libinput"
[ 419.058] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 419.079] (II) Module libinput: vendor="X.Org Foundation"
[ 419.079] compiled for 1.20.1, module version = 0.28.1
[ 419.079] Module class: X.Org XInput Driver
[ 419.079] ABI class: X.Org XInput driver, version 24.1
[ 419.079] (II) Using input driver 'libinput' for 'Power Button'
[ 419.080] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[ 419.081] (**) Power Button: always reports core events
[ 419.081] (**) Option "Device" "/dev/input/event3"
[ 419.081] (**) Option "_source" "server/udev"
[ 419.094] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 419.094] (II) event3 - Power Button: device is a keyboard
[ 419.094] (II) event3 - Power Button: device removed
[ 419.094] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 419.094] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 419.096] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 419.096] (II) event3 - Power Button: device is a keyboard
[ 419.097] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 419.097] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 419.097] (II) Using input driver 'libinput' for 'Video Bus'
[ 419.098] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 34 paused 0
[ 419.098] (**) Video Bus: always reports core events
[ 419.098] (**) Option "Device" "/dev/input/event8"
[ 419.098] (**) Option "_source" "server/udev"
[ 419.100] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 419.100] (II) event8 - Video Bus: device is a keyboard
[ 419.100] (II) event8 - Video Bus: device removed
[ 419.100] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8"
[ 419.100] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 419.102] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 419.102] (II) event8 - Video Bus: device is a keyboard
[ 419.103] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 419.103] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 419.103] (II) Using input driver 'libinput' for 'Video Bus'
[ 419.105] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 35 paused 0
[ 419.105] (**) Video Bus: always reports core events
[ 419.105] (**) Option "Device" "/dev/input/event9"
[ 419.105] (**) Option "_source" "server/udev"
[ 419.106] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 419.106] (II) event9 - Video Bus: device is a keyboard
[ 419.106] (II) event9 - Video Bus: device removed
[ 419.106] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input10/event9"
[ 419.106] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 419.108] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 419.108] (II) event9 - Video Bus: device is a keyboard
[ 419.109] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 419.110] (II) No input driver specified, ignoring this device.
[ 419.110] (II) This device may have been added with another device file.
[ 419.110] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 419.110] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 419.110] (II) Using input driver 'libinput' for 'Power Button'
[ 419.112] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 36 paused 0
[ 419.112] (**) Power Button: always reports core events
[ 419.112] (**) Option "Device" "/dev/input/event2"
[ 419.112] (**) Option "_source" "server/udev"
[ 419.113] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 419.113] (II) event2 - Power Button: device is a keyboard
[ 419.113] (II) event2 - Power Button: device removed
[ 419.114] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 419.114] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 419.115] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 419.115] (II) event2 - Power Button: device is a keyboard
[ 419.116] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 419.116] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 419.116] (II) Using input driver 'libinput' for 'Sleep Button'
[ 419.118] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 37 paused 0
[ 419.118] (**) Sleep Button: always reports core events
[ 419.118] (**) Option "Device" "/dev/input/event1"
[ 419.118] (**) Option "_source" "server/udev"
[ 419.119] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 419.119] (II) event1 - Sleep Button: device is a keyboard
[ 419.119] (II) event1 - Sleep Button: device removed
[ 419.119] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 419.119] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 419.121] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 419.121] (II) event1 - Sleep Button: device is a keyboard
[ 419.123] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 419.123] (II) No input driver specified, ignoring this device.
[ 419.123] (II) This device may have been added with another device file.
[ 419.123] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 419.123] (II) No input driver specified, ignoring this device.
[ 419.123] (II) This device may have been added with another device file.
[ 419.124] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 419.124] (II) No input driver specified, ignoring this device.
[ 419.124] (II) This device may have been added with another device file.
[ 419.124] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 419.124] (II) No input driver specified, ignoring this device.
[ 419.124] (II) This device may have been added with another device file.
[ 419.125] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 419.125] (II) No input driver specified, ignoring this device.
[ 419.125] (II) This device may have been added with another device file.
[ 419.125] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event15)
[ 419.125] (II) No input driver specified, ignoring this device.
[ 419.125] (II) This device may have been added with another device file.
[ 419.126] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event16)
[ 419.126] (II) No input driver specified, ignoring this device.
[ 419.126] (II) This device may have been added with another device file.
[ 419.126] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 419.126] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 419.126] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 419.127] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 38 paused 0
[ 419.127] (**) AT Translated Set 2 keyboard: always reports core events
[ 419.127] (**) Option "Device" "/dev/input/event4"
[ 419.127] (**) Option "_source" "server/udev"
[ 419.128] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 419.128] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 419.129] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 419.129] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 419.129] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 419.130] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 419.130] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 419.130] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 419.130] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 419.130] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 419.131] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 39 paused 0
[ 419.131] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 419.131] (**) Option "Device" "/dev/input/event7"
[ 419.131] (**) Option "_source" "server/udev"
[ 419.132] (II) event7 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 419.133] (II) event7 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 419.133] (II) event7 - SynPS/2 Synaptics TouchPad: device removed
[ 419.133] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 419.133] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 419.133] (**) Option "AccelerationScheme" "none"
[ 419.133] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 419.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 419.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 419.134] (II) event7 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 419.135] (II) event7 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 419.135] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 419.135] (II) No input driver specified, ignoring this device.
[ 419.135] (II) This device may have been added with another device file.
[ 419.135] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 419.135] (II) No input driver specified, ignoring this device.
[ 419.135] (II) This device may have been added with another device file.
[ 419.136] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event6)
[ 419.136] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 419.136] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[ 419.136] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 40 paused 0
[ 419.137] (**) MSI WMI hotkeys: always reports core events
[ 419.137] (**) Option "Device" "/dev/input/event6"
[ 419.137] (**) Option "_source" "server/udev"
[ 419.137] (II) event6 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 419.137] (II) event6 - MSI WMI hotkeys: device is a keyboard
[ 419.137] (II) event6 - MSI WMI hotkeys: device removed
[ 419.137] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event6"
[ 419.137] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)
[ 419.138] (II) event6 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 419.138] (II) event6 - MSI WMI hotkeys: device is a keyboard
[ 431.751] (**) Option "fd" "31"
[ 431.779] (II) event3 - Power Button: device removed
[ 431.779] (**) Option "fd" "34"
[ 431.779] (II) event8 - Video Bus: device removed
[ 431.779] (**) Option "fd" "35"
[ 431.779] (II) event9 - Video Bus: device removed
[ 431.779] (**) Option "fd" "36"
[ 431.779] (II) event2 - Power Button: device removed
[ 431.779] (**) Option "fd" "37"
[ 431.779] (II) event1 - Sleep Button: device removed
[ 431.779] (**) Option "fd" "38"
[ 431.779] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 431.779] (**) Option "fd" "39"
[ 431.779] (II) event7 - SynPS/2 Synaptics TouchPad: device removed
[ 431.779] (**) Option "fd" "40"
[ 431.779] (II) event6 - MSI WMI hotkeys: device removed
[ 432.069] (II) UnloadModule: "libinput"
[ 432.070] (II) systemd-logind: releasing fd for 13:70
[ 432.111] (II) UnloadModule: "libinput"
[ 432.111] (II) systemd-logind: releasing fd for 13:71
[ 432.169] (II) UnloadModule: "libinput"
[ 432.169] (II) systemd-logind: releasing fd for 13:68
[ 432.196] (II) UnloadModule: "libinput"
[ 432.196] (II) systemd-logind: releasing fd for 13:65
[ 432.236] (II) UnloadModule: "libinput"
[ 432.236] (II) systemd-logind: releasing fd for 13:66
[ 432.269] (II) UnloadModule: "libinput"
[ 432.270] (II) systemd-logind: releasing fd for 13:73
[ 432.356] (II) UnloadModule: "libinput"
[ 432.356] (II) systemd-logind: releasing fd for 13:72
[ 432.419] (II) UnloadModule: "libinput"
[ 432.419] (II) systemd-logind: releasing fd for 13:67
[ 432.514] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 432.515] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 432.515] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 432.515] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 432.516] (II) Server terminated successfully (0). Closing log file.`/etc/X11/xorg.conf`
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 415.13
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection`~/.xinitrc`
# export GDK_BACKEND=x11
# exec gnome-session
TERMINAL=konsole
exec i3If any other logs are needed, please ask.
Does anyone see what's happening and can help? Thank you in advance.
Last edited by nattynattynat (2018-11-19 17:26:54)
Offline
Remove that xorg.conf, then read the following for information on how to make use of your card, as you have an Optimus system which requires some more adjustments: https://wiki.archlinux.org/index.php/NVIDIA_Optimus also that .xinitrc is insufficient, ensure it correctly sets up your session, https://wiki.archlinux.org/index.php/Xinit#xinitrc note the second blue box.
Offline
Ah, thanks. I guess they call it Newbie Corner for a reason, hah.
Using `nvidia-xrun` worked. Thank you!
Offline