X crashes upon turning the screen back on/coming out of suspend

ngutwtan se wyrthstapa · 2018-12-04 20:00:21

As the title says, using amd drivers.

I have tried the various kernel parameters, as well as switching from amdgpu back to radeon (originally I think I went the other way, but I've been fiddling with this for a few days).

Xorg log (from before I switched from amdgpu - the issue hasn't changed, so I will probably switch right back): https://pastebin.com/Pw7PQRrF

Journalctl logs: https://pastebin.com/d0qg8BVB

Way back when, I originally thought the issue was with i3/i3gaps.

I've been browsing around, following various advice for the amdgpu and radeon drivers, no luck. There are a few who mention the issue on the forum, but the most likely to help one seems to have a post missing.

Any advice? Thanks.

(NB: Am major noob).

seth · 2018-12-04 21:43:59

There's no indication that the X11 server aborted or segfaulted in the pasted Xorg log. It actually only covers 2 seconds.
You might want to elaborate on how you determine that "X crashes"?

ceterum censeo: https://wiki.archlinux.org/index.php/Ne … e_hostname

ngutwtan se wyrthstapa · 2018-12-04 22:07:03

Well, as I said, I am a major noob; I've only had Arch running once before, on a simple dualboot (different pc) for using R and some other apps. I came with that erroneous assumption.

I noticed the mouse also works, just now, as well.

Still, while I can issue commands via terminal, I cannot get i3 or i3 gaps to respond visually. I am unsure what logs I ought to be going to to find the source of the problem - I assumed it was a driver error because of:

> [drm:construct [amdgpu]] ERROR construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3

Appearing previously.

I'll have a look through /var/logs..

And thanks, forgot about the hostname.

seth · 2018-12-04 22:14:31

I noticed the mouse also works, just now, as well.

So X11 is still running

I can issue commands via terminal

Do you get any visual response (the text you enter, output from the call, new windows in case you run eg. xterm)?

Do you also run a compositor next to i3 (xcompmgr, compton, …)?

ngutwtan se wyrthstapa · 2018-12-04 22:57:32

Do you get any visual response (the text you enter, output from the call, new windows in case you run eg. xterm)?

No.

Do you also run a compositor next to i3 (xcompmgr, compton, …)?

I did, but removed it during the course of troubleshooting.

The other X log shows up an error about the screen config - I guess this might be it? Or would this kind of error not be able to occur with X11 running?

https://pastebin.com/29DhKgZC

Off to the wiki.. Thanks for the help.

seth · 2018-12-05 08:30:50

The other log implies a broken KMS.
Does this also happen w/ the LTS kernel?

Also see https://bbs.archlinux.org/viewtopic.php?pid=1816829

ngutwtan se wyrthstapa · 2018-12-05 17:33:14

seth wrote:

The other log implies a broken KMS.
Does this also happen w/ the LTS kernel?
Also see https://bbs.archlinux.org/viewtopic.php?pid=1816829

Yes, it also happens w/ LTS.

I tried downgrading, but I'm guessing I may have done it incorrectly - the output of uname -r is still 4.19.4. I've looked through the wiki and a relevant answer on stackexchange,

Also, when I try to hibernate, it says I lack the swap capacity - could that be causing the issue with suspend, too?

loqs · 2018-12-05 17:38:00

What commands did you use to attempt the downgrade and what was their output?
What is the dmesg from a boot under linux-lts?

ngutwtan se wyrthstapa · 2018-12-05 20:03:35

loqs wrote:

What commands did you use to attempt the downgrade and what was their output?
What is the dmesg from a boot under linux-lts?

Dmesg from original lts:

[    0.000000] Linux version 4.19.4-arch1-1-ARCH (builduser@heftig-22537) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Fri Nov 23 09:06:58 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg0-root rw cryptdevice=/dev/sda3:luks:allow-discards root=dev/mapper/vg0-root quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d8885fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8886000-0x00000000d9285fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d9286000-0x00000000dee8efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dee8f000-0x00000000df08efff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000df08f000-0x00000000df87efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df87f000-0x00000000dfb7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dfb7f000-0x00000000dfbfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0200000-0x00000000f02fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001feffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000001ff000000-0x000000021effffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0xdf13f000  ESRT=0xdf140998  ACPI 2.0=0xdfbfe014  PROP=0xd69dc6f8 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: LENOVO 80S9/LNVNB161216, BIOS 1RCN33WW(V1.13) 11/13/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2894.428 MHz processor
[    0.000033] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000035] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000043] last_pfn = 0x1ff000 max_arch_pfn = 0x400000000
[    0.000047] MTRR default type: uncachable
[    0.000048] MTRR fixed ranges enabled:
[    0.000050]   00000-9FFFF write-back
[    0.000051]   A0000-BFFFF uncachable
[    0.000052]   C0000-FFFFF write-through
[    0.000052] MTRR variable ranges enabled:
[    0.000054]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000055]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000056]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000057]   3 base 0000FF800000 mask FFFFFF800000 write-protect
[    0.000057]   4 disabled
[    0.000058]   5 disabled
[    0.000058]   6 disabled
[    0.000059]   7 disabled
[    0.000060] TOM2: 000000021f000000 aka 8688M
[    0.000324] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000475] last_pfn = 0xdfc00 max_arch_pfn = 0x400000000
[    0.005507] esrt: Reserving ESRT space from 0x00000000df140998 to 0x00000000df1409d0.
[    0.005519] Scanning 1 areas for low memory corruption
[    0.005522] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[    0.005525] Using GB pages for direct mapping
[    0.005528] BRK [0x1b9201000, 0x1b9201fff] PGTABLE
[    0.005530] BRK [0x1b9202000, 0x1b9202fff] PGTABLE
[    0.005531] BRK [0x1b9203000, 0x1b9203fff] PGTABLE
[    0.005571] BRK [0x1b9204000, 0x1b9204fff] PGTABLE
[    0.005573] BRK [0x1b9205000, 0x1b9205fff] PGTABLE
[    0.005761] BRK [0x1b9206000, 0x1b9206fff] PGTABLE
[    0.005819] BRK [0x1b9207000, 0x1b9207fff] PGTABLE
[    0.005910] BRK [0x1b9208000, 0x1b9208fff] PGTABLE
[    0.006016] BRK [0x1b9209000, 0x1b9209fff] PGTABLE
[    0.006101] BRK [0x1b920a000, 0x1b920afff] PGTABLE
[    0.006177] Secure boot could not be determined
[    0.006179] RAMDISK: [mem 0x346c1000-0x36357fff]
[    0.006185] ACPI: Early table checksum verification disabled
[    0.006189] ACPI: RSDP 0x00000000DFBFE014 000024 (v02 LENOVO)
[    0.006192] ACPI: XSDT 0x00000000DFBFE120 0000BC (v01 LENOVO CB-01    00000001      01000013)
[    0.006198] ACPI: FACP 0x00000000DFBF9000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006205] ACPI: DSDT 0x00000000DFBEC000 008BB2 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006208] ACPI: FACS 0x00000000DFB7A000 000040
[    0.006211] ACPI: UEFI 0x00000000DFBFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006214] ACPI: UEFI 0x00000000DFBFC000 000042 (v01 LENOVO CB-01    00000001      00000000)
[    0.006217] ACPI: ASF! 0x00000000DFBFB000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006220] ACPI: BOOT 0x00000000DFBFA000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006223] ACPI: HPET 0x00000000DFBF8000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006226] ACPI: APIC 0x00000000DFBF7000 000090 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006229] ACPI: MCFG 0x00000000DFBF6000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006232] ACPI: SPCR 0x00000000DFBF5000 000050 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006235] ACPI: MSDM 0x00000000DFBEB000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006237] ACPI: SSDT 0x00000000DFBEA000 0006B2 (v01 LENOVO CB-01    00000001 AMD  00000001)
[    0.006240] ACPI: SSDT 0x00000000DFBE5000 004B5B (v02 LENOVO CB-01    00000001 MSFT 04000000)
[    0.006243] ACPI: IVRS 0x00000000DFBE4000 0000D0 (v02 LENOVO CB-01    00000001 AMD  00000000)
[    0.006246] ACPI: CRAT 0x00000000DFBE3000 0002E8 (v01 LENOVO CB-01    00000001 AMD  00000001)
[    0.006248] ACPI: VFCT 0x00000000DFBD3000 00FC84 (v01 LENOVO CB-01    00000001 AMD  31504F47)
[    0.006251] ACPI: SSDT 0x00000000DFBD1000 001492 (v01 LENOVO CB-01    00000001 INTL 20120711)
[    0.006254] ACPI: SSDT 0x00000000DFBCF000 00165E (v01 LENOVO CB-01    00000001 INTL 20120711)
[    0.006257] ACPI: FPDT 0x00000000DFBCE000 000044 (v01 LENOVO CB-01    00000001      01000013)
[    0.006259] ACPI: BGRT 0x00000000DFBCD000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.006269] ACPI: Local APIC address 0xfee00000
[    0.006374] No NUMA configuration found
[    0.006375] Faking a node at [mem 0x0000000000000000-0x00000001feffffff]
[    0.006379] NODE_DATA(0) allocated [mem 0x1feffc000-0x1feffffff]
[    0.006403] Zone ranges:
[    0.006404]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006405]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006407]   Normal   [mem 0x0000000100000000-0x00000001feffffff]
[    0.006408]   Device   empty
[    0.006409] Movable zone start for each node
[    0.006409] Early memory node ranges
[    0.006410]   node   0: [mem 0x0000000000001000-0x0000000000086fff]
[    0.006411]   node   0: [mem 0x0000000000088000-0x000000000009ffff]
[    0.006412]   node   0: [mem 0x0000000000100000-0x00000000d8885fff]
[    0.006412]   node   0: [mem 0x00000000d9286000-0x00000000dee8efff]
[    0.006413]   node   0: [mem 0x00000000dfbff000-0x00000000dfbfffff]
[    0.006414]   node   0: [mem 0x0000000100000000-0x00000001feffffff]
[    0.006563] Reserved but unavailable: 11218 pages
[    0.006566] Initmem setup node 0 [mem 0x0000000000001000-0x00000001feffffff]
[    0.006568] On node 0 totalpages: 1954862
[    0.006569]   DMA zone: 64 pages used for memmap
[    0.006570]   DMA zone: 23 pages reserved
[    0.006571]   DMA zone: 3998 pages, LIFO batch:0
[    0.006650]   DMA32 zone: 14163 pages used for memmap
[    0.006650]   DMA32 zone: 906384 pages, LIFO batch:63
[    0.023468]   Normal zone: 16320 pages used for memmap
[    0.023469]   Normal zone: 1044480 pages, LIFO batch:63
[    0.042262] ACPI: PM-Timer IO Port: 0x408
[    0.042263] ACPI: Local APIC address 0xfee00000
[    0.042270] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.042271] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.042271] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.042272] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.042281] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.042284] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[    0.042286] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.042287] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.042289] ACPI: IRQ0 used by override.
[    0.042289] ACPI: IRQ9 used by override.
[    0.042291] Using ACPI (MADT) for SMP configuration information
[    0.042293] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.042302] ACPI: SPCR: SPCR table version 1
[    0.042304] ACPI: SPCR: console: uart,io,0x3f8,115200
[    0.042306] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.042327] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.042329] PM: Registered nosave memory: [mem 0x00087000-0x00087fff]
[    0.042331] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[    0.042331] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.042333] PM: Registered nosave memory: [mem 0xd8886000-0xd9285fff]
[    0.042334] PM: Registered nosave memory: [mem 0xdee8f000-0xdf08efff]
[    0.042335] PM: Registered nosave memory: [mem 0xdf08f000-0xdf87efff]
[    0.042335] PM: Registered nosave memory: [mem 0xdf87f000-0xdfb7efff]
[    0.042336] PM: Registered nosave memory: [mem 0xdfb7f000-0xdfbfefff]
[    0.042337] PM: Registered nosave memory: [mem 0xdfc00000-0xdfffffff]
[    0.042338] PM: Registered nosave memory: [mem 0xe0000000-0xf01fffff]
[    0.042338] PM: Registered nosave memory: [mem 0xf0200000-0xf02fffff]
[    0.042339] PM: Registered nosave memory: [mem 0xf0300000-0xf7ffffff]
[    0.042339] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.042340] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.042340] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.042341] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.042341] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.042342] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[    0.042343] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[    0.042343] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[    0.042344] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.042344] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.042345] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.042347] [mem 0xe0000000-0xf01fffff] available for PCI devices
[    0.042348] Booting paravirtualized kernel on bare hardware
[    0.042351] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.168039] random: get_random_bytes called from start_kernel+0x95/0x53f with crng_init=0
[    0.168048] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.168563] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[    0.168569] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.168570] pcpu-alloc: [0] 0 1 2 3 
[    0.168590] Built 1 zonelists, mobility grouping on.  Total pages: 1924292
[    0.168591] Policy zone: Normal
[    0.168593] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg0-root rw cryptdevice=/dev/sda3:luks:allow-discards root=dev/mapper/vg0-root quiet
[    0.182255] Calgary: detecting Calgary via BIOS EBDA area
[    0.182256] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.213707] Memory: 7513196K/7819448K available (12300K kernel code, 1374K rwdata, 3640K rodata, 1532K init, 3860K bss, 306252K reserved, 0K cma-reserved)
[    0.213882] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.213890] ftrace: allocating 35539 entries in 139 pages
[    0.230503] rcu: Preemptible hierarchical RCU implementation.
[    0.230505] rcu:   CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.230505] rcu:   RCU dyntick-idle grace-period acceleration is enabled.
[    0.230506] rcu:   RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.230507] rcu:   RCU priority boosting: priority 1 delay 500 ms.
[    0.230508]  Tasks RCU enabled.
[    0.230508] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.232129] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[    0.232286] rcu:   Offload RCU callbacks from CPUs: (none).
[    0.232332] Console: colour dummy device 80x25
[    0.232339] console [tty0] enabled
[    0.232363] ACPI: Core revision 20180810
[    0.232650] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.232665] hpet clockevent registered
[    0.232669] APIC: Switch to symmetric I/O mode setup
[    0.253837] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.269338] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b8b34c510, max_idle_ns: 440795239075 ns
[    0.269353] Calibrating delay loop (skipped), value calculated using timer frequency.. 5791.05 BogoMIPS (lpj=9648093)
[    0.269356] pid_max: default: 32768 minimum: 301
[    0.272749] Security Framework initialized
[    0.272752] Yama: becoming mindful.
[    0.272759] AppArmor: AppArmor disabled by boot time parameter
[    0.274612] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.275566] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.275616] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.275646] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.276126] mce: CPU supports 7 MCE banks
[    0.276134] LVT offset 1 assigned for vector 0xf9
[    0.276138] [Firmware Bug]: cpu 0, invalid threshold interrupt offset 1 for bank 4, block 0 (MSR00000413=0xd000000001000000)
[    0.276142] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.276143] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.276145] Spectre V2 : Mitigation: Full AMD retpoline
[    0.276146] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.276148] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.280200] Freeing SMP alternatives memory: 28K
[    0.286008] smpboot: CPU0: AMD A9-9410 RADEON R5, 5 COMPUTE CORES 2C+3G (family: 0x15, model: 0x70, stepping: 0x0)
[    0.302701] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.302709] ... version:                0
[    0.302710] ... bit width:              48
[    0.302710] ... generic registers:      6
[    0.302711] ... value mask:             0000ffffffffffff
[    0.302712] ... max period:             00007fffffffffff
[    0.302712] ... fixed-purpose events:   0
[    0.302713] ... event mask:             000000000000003f
[    0.309433] rcu: Hierarchical SRCU implementation.
[    0.332720] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.339376] smp: Bringing up secondary CPUs ...
[    0.379382] x86: Booting SMP configuration:
[    0.379385] .... node  #0, CPUs:      #1
[    0.381534] smp: Brought up 1 node, 2 CPUs
[    0.381534] smpboot: Max logical packages: 2
[    0.381534] smpboot: Total of 2 processors activated (11582.11 BogoMIPS)
[    0.381534] devtmpfs: initialized
[    0.381534] x86/mm: Memory block size: 128MB
[    0.382702] PM: Registering ACPI NVS region [mem 0xdf87f000-0xdfb7efff] (3145728 bytes)
[    0.382797] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.382797] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.382797] pinctrl core: initialized pinctrl subsystem
[    0.382875] RTC time: 17:49:11, date: 12/05/18
[    0.383047] NET: Registered protocol family 16
[    0.383135] audit: initializing netlink subsys (disabled)
[    0.383143] audit: type=2000 audit(1544032150.133:1): state=initialized audit_enabled=0 res=1
[    0.386087] cpuidle: using governor ladder
[    0.386087] cpuidle: using governor menu
[    0.386087] Simple Boot Flag at 0x44 set to 0x1
[    0.386087] ACPI: bus type PCI registered
[    0.386089] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.386190] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.386196] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.386196] PCI: Using configuration type 1 for base access
[    0.389860] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.389860] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.389860] ACPI: Added _OSI(Module Device)
[    0.389860] ACPI: Added _OSI(Processor Device)
[    0.389860] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.389860] ACPI: Added _OSI(Processor Aggregator Device)
[    0.389860] ACPI: Added _OSI(Linux-Dell-Video)
[    0.389860] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.400682] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.405083] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.407053] ACPI: EC: EC started
[    0.407054] ACPI: EC: interrupt blocked
[    0.407264] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[    0.407266] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.407267] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
[    0.407268] ACPI: Interpreter enabled
[    0.407288] ACPI: (supports S0 S3 S4 S5)
[    0.407290] ACPI: Using IOAPIC for interrupt routing
[    0.407452] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.407781] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.409540] ACPI: Power Resource [P0U2] (off)
[    0.409575] ACPI: Power Resource [P3U2] (off)
[    0.409942] ACPI: Power Resource [P0U3] (off)
[    0.409976] ACPI: Power Resource [P3U3] (off)
[    0.411575] ACPI: Power Resource [P0ST] (on)
[    0.411608] ACPI: Power Resource [P3ST] (on)
[    0.412145] ACPI: Power Resource [P0SD] (off)
[    0.412178] ACPI: Power Resource [P3SD] (off)
[    0.414500] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.414507] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.414511] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.414525] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.414798] PCI host bridge to bus 0000:00
[    0.414800] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.414801] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.414803] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.414804] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.414805] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.414806] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.414808] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.414809] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.414810] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.414811] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.414812] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.414813] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.414814] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.414816] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.414817] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.414818] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[    0.414819] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[    0.414821] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.414828] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[    0.414924] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
[    0.415031] pci 0000:00:01.0: [1002:98e4] type 00 class 0x030000
[    0.415047] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.415055] pci 0000:00:01.0: reg 0x18: [mem 0xf0800000-0xf0ffffff 64bit pref]
[    0.415060] pci 0000:00:01.0: reg 0x20: [io  0x4000-0x40ff]
[    0.415065] pci 0000:00:01.0: reg 0x24: [mem 0xf0600000-0xf063ffff]
[    0.415070] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.415074] pci 0000:00:01.0: enabling Extended Tags
[    0.415082] pci 0000:00:01.0: BAR 0: assigned to efifb
[    0.415108] pci 0000:00:01.0: supports D1 D2
[    0.415110] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.415198] pci 0000:00:01.1: [1002:15b3] type 00 class 0x040300
[    0.415212] pci 0000:00:01.1: reg 0x10: [mem 0xf0660000-0xf0663fff 64bit]
[    0.415233] pci 0000:00:01.1: enabling Extended Tags
[    0.415259] pci 0000:00:01.1: supports D1 D2
[    0.415328] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[    0.415413] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
[    0.415443] pci 0000:00:02.2: enabling Extended Tags
[    0.415478] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.415563] pci 0000:00:02.3: [1022:157c] type 01 class 0x060400
[    0.415594] pci 0000:00:02.3: enabling Extended Tags
[    0.415628] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    0.415715] pci 0000:00:02.4: [1022:157c] type 01 class 0x060400
[    0.415746] pci 0000:00:02.4: enabling Extended Tags
[    0.415781] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    0.415864] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[    0.415954] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[    0.415966] pci 0000:00:08.0: reg 0x10: [mem 0xf0640000-0xf065ffff 64bit pref]
[    0.415971] pci 0000:00:08.0: reg 0x18: [mem 0xf0300000-0xf03fffff]
[    0.415975] pci 0000:00:08.0: reg 0x1c: [mem 0xf066f000-0xf066ffff]
[    0.415982] pci 0000:00:08.0: reg 0x24: [mem 0xf066a000-0xf066bfff]
[    0.416074] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[    0.416153] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
[    0.416163] pci 0000:00:09.2: reg 0x10: [mem 0xf0664000-0xf0667fff]
[    0.416196] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[    0.416285] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[    0.416311] pci 0000:00:10.0: reg 0x10: [mem 0xf0668000-0xf0669fff 64bit]
[    0.416406] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.416496] pci 0000:00:11.0: [1022:7904] type 00 class 0x010601
[    0.416514] pci 0000:00:11.0: reg 0x10: [io  0x4118-0x411f]
[    0.416521] pci 0000:00:11.0: reg 0x14: [io  0x4124-0x4127]
[    0.416529] pci 0000:00:11.0: reg 0x18: [io  0x4110-0x4117]
[    0.416537] pci 0000:00:11.0: reg 0x1c: [io  0x4120-0x4123]
[    0.416544] pci 0000:00:11.0: reg 0x20: [io  0x4100-0x410f]
[    0.416552] pci 0000:00:11.0: reg 0x24: [mem 0xf066c000-0xf066c3ff]
[    0.416587] pci 0000:00:11.0: PME# supported from D3hot
[    0.416662] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
[    0.417491] pci 0000:00:12.0: reg 0x10: [mem 0xf066d000-0xf066d0ff]
[    0.419777] pci 0000:00:12.0: supports D1 D2
[    0.419778] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.419856] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.419976] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.420103] pci 0000:00:18.0: [1022:15b0] type 00 class 0x060000
[    0.420173] pci 0000:00:18.1: [1022:15b1] type 00 class 0x060000
[    0.420241] pci 0000:00:18.2: [1022:15b2] type 00 class 0x060000
[    0.420315] pci 0000:00:18.3: [1022:15b3] type 00 class 0x060000
[    0.420383] pci 0000:00:18.4: [1022:15b4] type 00 class 0x060000
[    0.420448] pci 0000:00:18.5: [1022:15b5] type 00 class 0x060000
[    0.420572] pci 0000:01:00.0: [10ec:5229] type 00 class 0xff0000
[    0.420600] pci 0000:01:00.0: reg 0x10: [mem 0xf0500000-0xf0500fff]
[    0.420716] pci 0000:01:00.0: supports D1 D2
[    0.420717] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.420754] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:02.2 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[    0.420838] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.420844] pci 0000:00:02.2:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.420902] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.420931] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.420958] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit]
[    0.420977] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit]
[    0.421067] pci 0000:02:00.0: supports D1 D2
[    0.421069] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.421224] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.421228] pci 0000:00:02.3:   bridge window [io  0x3000-0x3fff]
[    0.421230] pci 0000:00:02.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.421282] pci 0000:03:00.0: [168c:0042] type 00 class 0x028000
[    0.421312] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf01fffff 64bit]
[    0.421418] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.421530] pci 0000:00:02.4: PCI bridge to [bus 03-06]
[    0.421534] pci 0000:00:02.4:   bridge window [io  0x2000-0x2fff]
[    0.421537] pci 0000:00:02.4:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.421541] pci 0000:00:02.4:   bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
[    0.421901] ACPI: IRQ 10 override to edge, high
[    0.426507] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled.
[    0.426585] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled.
[    0.426645] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled.
[    0.426717] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled.
[    0.426785] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled.
[    0.426840] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled.
[    0.426895] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled.
[    0.426950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled.
[    0.427514] ACPI: EC: interrupt unblocked
[    0.427523] ACPI: EC: event unblocked
[    0.427529] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.427530] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.427614] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.427614] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.427614] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.427614] vgaarb: loaded
[    0.427614] ACPI: bus type USB registered
[    0.427614] usbcore: registered new interface driver usbfs
[    0.427614] usbcore: registered new interface driver hub
[    0.427614] usbcore: registered new device driver usb
[    0.453642] pps_core: LinuxPPS API ver. 1 registered
[    0.453644] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.453649] PTP clock support registered
[    0.453663] EDAC MC: Ver: 3.0.0
[    0.453778] Registered efivars operations
[    0.476175] PCI: Using ACPI for IRQ routing
[    0.480421] PCI: pci_cache_line_size set to 64 bytes
[    0.480483] e820: reserve RAM buffer [mem 0x00087000-0x0008ffff]
[    0.480484] e820: reserve RAM buffer [mem 0xd8886000-0xdbffffff]
[    0.480485] e820: reserve RAM buffer [mem 0xdee8f000-0xdfffffff]
[    0.480486] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff]
[    0.480487] e820: reserve RAM buffer [mem 0x1ff000000-0x1ffffffff]
[    0.480604] NetLabel: Initializing
[    0.480605] NetLabel:  domain hash size = 128
[    0.480605] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.480618] NetLabel:  unlabeled traffic allowed by default
[    0.480623] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.480623] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.482677] clocksource: Switched to clocksource tsc-early
[    0.495460] VFS: Disk quotas dquot_6.6.0
[    0.495481] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.495581] pnp: PnP ACPI init
[    0.495822] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    0.495824] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.495825] system 00:00: [mem 0xf0200000-0xf02fffff] has been reserved
[    0.495830] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.495968] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.495995] pnp 00:02: Plug and Play ACPI device, IDs FUJ7401 PNP0303 (active)
[    0.496024] pnp 00:03: Plug and Play ACPI device, IDs ETD065d ETD0000 PNP0f13 (active)
[    0.496106] system 00:04: [io  0x0400-0x04cf] has been reserved
[    0.496112] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.496113] system 00:04: [io  0x04d6] has been reserved
[    0.496114] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.496116] system 00:04: [io  0x0c14] has been reserved
[    0.496117] system 00:04: [io  0x0c50-0x0c52] has been reserved
[    0.496118] system 00:04: [io  0x0c6c] has been reserved
[    0.496120] system 00:04: [io  0x0c6f] has been reserved
[    0.496121] system 00:04: [io  0x0cd0-0x0cdb] has been reserved
[    0.496124] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.496188] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.496189] system 00:05: [mem 0xff800000-0xffffffff] has been reserved
[    0.496193] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.505693] pnp: PnP ACPI: found 6 devices
[    0.511698] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.511708] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.511745] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0680000-0xf069ffff pref]
[    0.511748] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.511752] pci 0000:00:02.2:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.511757] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.511759] pci 0000:00:02.3:   bridge window [io  0x3000-0x3fff]
[    0.511763] pci 0000:00:02.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.511768] pci 0000:00:02.4: PCI bridge to [bus 03-06]
[    0.511770] pci 0000:00:02.4:   bridge window [io  0x2000-0x2fff]
[    0.511773] pci 0000:00:02.4:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.511775] pci 0000:00:02.4:   bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
[    0.511781] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.511783] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.511784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.511785] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.511787] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.511788] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.511789] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.511790] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.511792] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.511793] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.511794] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.511795] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.511796] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.511797] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.511799] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.511800] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff window]
[    0.511801] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window]
[    0.511803] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.511804] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.511805] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.511807] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.511808] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[    0.511809] pci_bus 0000:03: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref]
[    0.511931] NET: Registered protocol family 2
[    0.512100] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.512134] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.512263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.512481] TCP: Hash tables configured (established 65536 bind 65536)
[    0.512547] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.512580] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.512683] NET: Registered protocol family 1
[    0.512689] NET: Registered protocol family 44
[    0.512701] pci 0000:00:01.0: disabling ATS (broken on this device)
[    0.512708] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.512714] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
[    0.535282] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c6 took 18599 usecs
[    0.535314] PCI: CLS 64 bytes, default 64
[    0.535364] Unpacking initramfs...
[    0.940747] Freeing initrd memory: 29276K
[    0.940766] AMD-Vi: IOMMU performance counters supported
[    0.940931] pci 0000:00:00.2: can't derive routing for PCI INT A
[    0.940932] pci 0000:00:00.2: PCI INT A: not connected
[    0.941148] iommu: Adding device 0000:00:01.0 to group 0
[    0.941158] iommu: Using direct mapping for device 0000:00:01.0
[    0.941175] iommu: Adding device 0000:00:01.1 to group 0
[    0.941226] iommu: Adding device 0000:00:02.0 to group 1
[    0.941243] iommu: Adding device 0000:00:02.2 to group 1
[    0.941260] iommu: Adding device 0000:00:02.3 to group 1
[    0.941277] iommu: Adding device 0000:00:02.4 to group 1
[    0.941346] iommu: Adding device 0000:00:03.0 to group 2
[    0.941407] iommu: Adding device 0000:00:08.0 to group 3
[    0.941477] iommu: Adding device 0000:00:09.0 to group 4
[    0.941491] iommu: Adding device 0000:00:09.2 to group 4
[    0.941548] iommu: Adding device 0000:00:10.0 to group 5
[    0.941610] iommu: Adding device 0000:00:11.0 to group 6
[    0.941704] iommu: Adding device 0000:00:12.0 to group 7
[    0.941779] iommu: Adding device 0000:00:14.0 to group 8
[    0.941795] iommu: Adding device 0000:00:14.3 to group 8
[    0.941880] iommu: Adding device 0000:00:18.0 to group 9
[    0.941896] iommu: Adding device 0000:00:18.1 to group 9
[    0.941911] iommu: Adding device 0000:00:18.2 to group 9
[    0.941927] iommu: Adding device 0000:00:18.3 to group 9
[    0.941942] iommu: Adding device 0000:00:18.4 to group 9
[    0.941957] iommu: Adding device 0000:00:18.5 to group 9
[    0.941974] iommu: Adding device 0000:01:00.0 to group 1
[    0.941991] iommu: Adding device 0000:02:00.0 to group 1
[    0.942006] iommu: Adding device 0000:03:00.0 to group 1
[    0.942456] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    0.942457] AMD-Vi: Extended features (0x37ef22294ada):
[    0.942458]  PPR NX GT IA GA PC GA_vAPIC
[    0.942462] AMD-Vi: Interrupt remapping enabled
[    0.942462] AMD-Vi: virtual APIC enabled
[    0.942599] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.943935] LVT offset 0 assigned for vector 0x400
[    0.943973] perf: AMD IBS detected (0x000007ff)
[    0.943978] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.944044] Scanning for low memory corruption every 60 seconds
[    0.944633] Initialise system trusted keyrings
[    0.944648] Key type blacklist registered
[    0.944708] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.945988] zbud: loaded
[    0.946231] pstore: using zstd compression
[    0.947575] Key type asymmetric registered
[    0.947578] Asymmetric key parser 'x509' registered
[    0.947595] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.947639] io scheduler noop registered
[    0.947640] io scheduler deadline registered
[    0.947687] io scheduler cfq registered (default)
[    0.947689] io scheduler mq-deadline registered
[    0.947689] io scheduler kyber registered
[    0.947716] io scheduler bfq registered
[    0.948277] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.948381] efifb: probing for efifb
[    0.948402] efifb: showing boot graphics
[    0.949365] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k
[    0.949366] efifb: mode is 1366x768x32, linelength=5632, pages=1
[    0.949367] efifb: scrolling: redraw
[    0.949368] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.949437] fbcon: Deferring console take-over
[    0.949438] fb0: EFI VGA frame buffer device
[    0.949490] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.949499] ACPI: Power Button [PWRB]
[    0.949566] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.949573] ACPI: Lid Switch [LID]
[    0.949608] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.949624] ACPI: Power Button [PWRF]
[    0.949721] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    0.950040] acpi device:00: registered as cooling_device0
[    0.950078] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    0.950535] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.951361] usbcore: registered new interface driver usbserial_generic
[    0.951368] usbserial: USB Serial support registered for generic
[    0.951391] rtc_cmos 00:01: RTC can wake from S4
[    0.951518] rtc_cmos 00:01: registered as rtc0
[    0.951533] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.951605] ledtrig-cpu: registered to indicate activity on CPUs
[    0.951878] NET: Registered protocol family 10
[    0.955483] Segment Routing with IPv6
[    0.955510] NET: Registered protocol family 17
[    0.955672] RAS: Correctable Errors collector initialized.
[    0.955767] microcode: CPU0: patch_level=0x06006704
[    0.955772] microcode: CPU1: patch_level=0x06006704
[    0.955815] microcode: Microcode Update Driver: v2.2.
[    0.955832] sched_clock: Marking stable (938772465, 17038747)->(1089226211, -133414999)
[    0.956092] registered taskstats version 1
[    0.956100] Loading compiled-in X.509 certificates
[    0.958498] Loaded X.509 cert 'Build time autogenerated kernel key: d24dd2646acfd3dc1dfbac003e2c7dc429e13dc1'
[    0.958530] zswap: loaded using pool lzo/zbud
[    0.961875] Key type big_key registered
[    0.962213]   Magic number: 14:4:845
[    0.962304] rtc_cmos 00:01: setting system clock to 2018-12-05 17:49:11 UTC (1544032151)
[    1.248818] Freeing unused decrypted memory: 2040K
[    1.463560] Freeing unused kernel image memory: 1532K
[    1.463565] Write protecting the kernel read-only data: 18432k
[    1.464925] Freeing unused kernel image memory: 2008K
[    1.465089] Freeing unused kernel image memory: 456K
[    1.473064] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.473072] Run /init as init process
[    1.523880] fbcon: Taking over console
[    1.523972] Console: switching to colour frame buffer device 170x48
[    1.586094] raid6: sse2x1   gen()  7189 MB/s
[    1.642682] raid6: sse2x1   xor()  4982 MB/s
[    1.699345] raid6: sse2x2   gen()  9410 MB/s
[    1.756011] raid6: sse2x2   xor()  6734 MB/s
[    1.812690] raid6: sse2x4   gen() 11082 MB/s
[    1.869348] raid6: sse2x4   xor()  4991 MB/s
[    1.926016] raid6: avx2x1   gen() 10614 MB/s
[    1.956019] tsc: Refined TSC clocksource calibration: 2894.566 MHz
[    1.956024] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b935c540d, max_idle_ns: 440795337614 ns
[    1.982683] raid6: avx2x1   xor()  6619 MB/s
[    1.982685] clocksource: Switched to clocksource tsc
[    2.039346] raid6: avx2x2   gen() 12591 MB/s
[    2.096012] raid6: avx2x2   xor()  7702 MB/s
[    2.152677] raid6: avx2x4   gen() 13941 MB/s
[    2.209347] raid6: avx2x4   xor()  6180 MB/s
[    2.209348] raid6: using algorithm avx2x4 gen() 13941 MB/s
[    2.209349] raid6: .... xor() 6180 MB/s, rmw enabled
[    2.209350] raid6: using avx2x2 recovery algorithm
[    2.210438] xor: automatically using best checksumming function   avx       
[    2.245824] Btrfs loaded, crc32c=crc32c-intel
[    2.247699] Linux agpgart interface v0.103
[    2.342718] [drm] amdgpu kernel modesetting enabled.
[    2.343957] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[    2.343959] fb: switching to amdgpudrmfb from EFI VGA
[    2.343986] Console: switching to colour dummy device 80x25
[    2.345199] [drm] initializing kernel modesetting (STONEY 0x1002:0x98E4 0x17AA:0x3804 0xC1).
[    2.345222] [drm] register mmio base: 0xF0600000
[    2.345222] [drm] register mmio size: 262144
[    2.345233] [drm] add ip block number 0 <vi_common>
[    2.345235] [drm] add ip block number 1 <gmc_v8_0>
[    2.345236] [drm] add ip block number 2 <cz_ih>
[    2.345237] [drm] add ip block number 3 <powerplay>
[    2.345238] [drm] add ip block number 4 <dm>
[    2.345239] [drm] add ip block number 5 <gfx_v8_0>
[    2.345240] [drm] add ip block number 6 <sdma_v3_0>
[    2.345241] [drm] add ip block number 7 <uvd_v6_0>
[    2.345242] [drm] add ip block number 8 <vce_v3_0>
[    2.345243] [drm] add ip block number 9 <acp_ip>
[    2.345255] [drm] UVD is enabled in physical mode
[    2.345257] [drm] VCE enabled in VM mode
[    2.345287] ATOM BIOS: 113-C91400-005
[    2.345323] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    2.345331] amdgpu 0000:00:01.0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[    2.345333] amdgpu 0000:00:01.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    2.345338] [drm] Detected VRAM RAM=512M, BAR=512M
[    2.345339] [drm] RAM width 64bits UNKNOWN
[    2.346455] [TTM] Zone  kernel: Available graphics memory: 3836238 kiB
[    2.346457] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.346458] [TTM] Initializing pool allocator
[    2.346462] [TTM] Initializing DMA pool allocator
[    2.346518] [drm] amdgpu: 512M of VRAM memory ready
[    2.346520] [drm] amdgpu: 3072M of GTT memory ready.
[    2.346542] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    2.346577] [drm] PCIE GART of 1024M enabled (table at 0x000000F400401000).
[    2.348037] [drm] Found UVD firmware Version: 1.43 Family ID: 15
[    2.348044] [drm] UVD ENC is disabled
[    2.348336] [drm] Found VCE firmware Version: 52.0 Binary ID: 3
[    2.373458] [drm] DM_PPLIB: values for Engine clock
[    2.373461] [drm] DM_PPLIB:   200000
[    2.373462] [drm] DM_PPLIB:   300000
[    2.373462] [drm] DM_PPLIB:   400000
[    2.373463] [drm] DM_PPLIB:   496560
[    2.373463] [drm] DM_PPLIB:   600000
[    2.373463] [drm] DM_PPLIB:   685720
[    2.373464] [drm] DM_PPLIB:   757900
[    2.373464] [drm] DM_PPLIB:   800000
[    2.373465] [drm] DM_PPLIB: Validation clocks:
[    2.373465] [drm] DM_PPLIB:    engine_max_clock: 80000
[    2.373466] [drm] DM_PPLIB:    memory_max_clock: 106600
[    2.373467] [drm] DM_PPLIB:    level           : 8
[    2.373468] [drm] DM_PPLIB: values for Display clock
[    2.373468] [drm] DM_PPLIB:   300000
[    2.373469] [drm] DM_PPLIB:   400000
[    2.373469] [drm] DM_PPLIB:   496560
[    2.373469] [drm] DM_PPLIB:   626090
[    2.373470] [drm] DM_PPLIB:   685720
[    2.373470] [drm] DM_PPLIB:   757900
[    2.373471] [drm] DM_PPLIB:   800000
[    2.373471] [drm] DM_PPLIB:   847060
[    2.373471] [drm] DM_PPLIB: Validation clocks:
[    2.373472] [drm] DM_PPLIB:    engine_max_clock: 80000
[    2.373472] [drm] DM_PPLIB:    memory_max_clock: 106600
[    2.373473] [drm] DM_PPLIB:    level           : 8
[    2.373474] [drm] DM_PPLIB: values for Memory clock
[    2.373474] [drm] DM_PPLIB:   667000
[    2.373475] [drm] DM_PPLIB:   1066000
[    2.373475] [drm] DM_PPLIB: Validation clocks:
[    2.373475] [drm] DM_PPLIB:    engine_max_clock: 80000
[    2.373476] [drm] DM_PPLIB:    memory_max_clock: 106600
[    2.373476] [drm] DM_PPLIB:    level           : 8
[    2.373626] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
[    2.392897] [drm] Display Core initialized with v3.1.59!
[    2.400216] [drm] SADs count is: -2, don't need to read it
[    2.401124] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.401125] [drm] Driver supports precise vblank timestamp query.
[    2.430115] [drm] UVD initialized successfully.
[    2.531050] [drm] VCE initialized successfully.
[    2.532134] [drm] fb mappable at 0x1FF867000
[    2.532136] [drm] vram apper at 0x1FF000000
[    2.532137] [drm] size 4325376
[    2.532137] [drm] fb depth is 24
[    2.532138] [drm]    pitch is 5632
[    2.532230] fbcon: amdgpudrmfb (fb0) is primary device
[    2.553420] Console: switching to colour frame buffer device 170x48
[    2.572119] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[    2.593769] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:00:01.0 on minor 0
[    2.622981] [drm] radeon kernel modesetting enabled.
[    2.703058] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    2.713837] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.713909] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.723458] SCSI subsystem initialized
[    2.725403] cryptd: max_cpu_qlen set to 1000
[    2.737020] AVX2 version of gcm_enc/dec engaged.
[    2.737022] AES CTR mode by8 optimization enabled
[    2.745686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.746926] ehci-pci: EHCI PCI platform driver
[    2.747158] ehci-pci 0000:00:12.0: EHCI Host Controller
[    2.747168] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[    2.747182] ehci-pci 0000:00:12.0: debug port 2
[    2.747233] ehci-pci 0000:00:12.0: irq 18, io mem 0xf066d000
[    2.753977] libata version 3.00 loaded.
[    2.759379] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[    2.759683] ahci 0000:00:11.0: version 3.0
[    2.759927] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    2.759930] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
[    2.759939] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.759941] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.759943] usb usb1: Product: EHCI Host Controller
[    2.759944] usb usb1: Manufacturer: Linux 4.19.4-arch1-1-ARCH ehci_hcd
[    2.759946] usb usb1: SerialNumber: 0000:00:12.0
[    2.760269] hub 1-0:1.0: USB hub found
[    2.760331] hub 1-0:1.0: 2 ports detected
[    2.760548] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.760555] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.760753] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[    2.761316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.761319] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.761321] usb usb2: Product: xHCI Host Controller
[    2.761322] usb usb2: Manufacturer: Linux 4.19.4-arch1-1-ARCH xhci-hcd
[    2.761323] usb usb2: SerialNumber: 0000:00:10.0
[    2.761548] hub 2-0:1.0: USB hub found
[    2.761634] hub 2-0:1.0: 4 ports detected
[    2.762002] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.762009] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    2.762013] xhci_hcd 0000:00:10.0: Host supports USB 3.0  SuperSpeed
[    2.763693] scsi host0: ahci
[    2.763842] ata1: SATA max UDMA/133 abar m1024@0xf066c000 port 0xf066c100 irq 19
[    2.767689] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.767730] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    2.767732] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.767734] usb usb3: Product: xHCI Host Controller
[    2.767735] usb usb3: Manufacturer: Linux 4.19.4-arch1-1-ARCH xhci-hcd
[    2.767737] usb usb3: SerialNumber: 0000:00:10.0
[    2.767920] hub 3-0:1.0: USB hub found
[    2.767934] hub 3-0:1.0: 4 ports detected
[    2.768468] usb: port power management may be unreliable
[    2.775301] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.089488] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    3.232832] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.233676] ata1.00: ATA-9: WDC WD10SPCX-24HWST1, 02.01A02, max UDMA/133
[    3.233679] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.234410] ata1.00: configured for UDMA/133
[    3.234604] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10SPCX-24H 1A02 PQ: 0 ANSI: 5
[    3.236440] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[    3.236442] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.237005] hub 1-1:1.0: USB hub found
[    3.237218] hub 1-1:1.0: 4 ports detected
[    3.238066] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.238068] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.238076] sd 0:0:0:0: [sda] Write Protect is off
[    3.238078] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.238087] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.401184]  sda: sda1 sda2 sda3
[    3.401559] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.532832] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    3.648045] random: fast init done
[    3.648774] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=e360, bcdDevice= 0.01
[    3.648776] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.702056] device-mapper: uevent: version 1.0.3
[    3.702184] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    3.726169] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    3.839248] usb 1-1.4: New USB device found, idVendor=174f, idProduct=2409, bcdDevice= 0.07
[    3.839251] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    3.839252] usb 1-1.4: Product: EasyCamera
[    3.839253] usb 1-1.4: Manufacturer: W161213d3937
[   40.040784] random: crng init done
[   43.161469] NET: Registered protocol family 38
[   46.813825] BTRFS: device fsid 635c6a93-0902-4c24-a2d5-cd7c1c0d4d99 devid 1 transid 2725 /dev/dm-2
[   46.989609] BTRFS info (device dm-2): disk space caching is enabled
[   46.989612] BTRFS info (device dm-2): has skinny extents
[   48.375437] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   48.389605] systemd[1]: Detected architecture x86-64.
[   48.419656] systemd[1]: Set hostname to <tatws>.
[   48.931095] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   48.931158] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   48.951849] systemd[1]: Listening on LVM2 poll daemon socket.
[   48.960032] systemd[1]: Listening on udev Kernel Socket.
[   48.960219] systemd[1]: Listening on Journal Socket (/dev/log).
[   48.960314] systemd[1]: Listening on Journal Socket.
[   48.962151] systemd[1]: Mounting POSIX Message Queue File System...
[   49.132198] audit: type=1130 audit(1544032199.663:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.138555] audit: type=1130 audit(1544032199.667:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.138561] audit: type=1130 audit(1544032199.670:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.182954] audit: type=1130 audit(1544032199.717:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.230044] audit: type=1130 audit(1544032199.763:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.284340] audit: type=1130 audit(1544032199.820:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.294474] audit: type=1130 audit(1544032199.830:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.316525] audit: type=1130 audit(1544032199.850:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.323190] systemd-journald[360]: Received request to flush runtime journal from PID 1
[   50.132638] audit: type=1130 audit(1544032200.663:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   50.263605] audit: type=1130 audit(1544032200.797:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   51.807686] acpi_cpufreq: overriding BIOS provided _PSD data
[   51.819569] ACPI: AC Adapter [ACAD] (on-line)
[   51.826681] hidraw: raw HID events driver (C) Jiri Kosina
[   51.846460] i2c_hid i2c-BMA250E:00: i2c-BMA250E:00 supply vdd not found, using dummy regulator
[   51.846485] i2c_hid i2c-BMA250E:00: Linked as a consumer to regulator.0
[   51.846487] i2c_hid i2c-BMA250E:00: i2c-BMA250E:00 supply vddl not found, using dummy regulator
[   51.922895] battery: ACPI: Battery Slot [BAT1] (battery present)
[   51.928826] i2c_hid i2c-PNP0C50:00: i2c-PNP0C50:00 supply vdd not found, using dummy regulator
[   51.928848] i2c_hid i2c-PNP0C50:00: Linked as a consumer to regulator.0
[   51.928850] i2c_hid i2c-PNP0C50:00: i2c-PNP0C50:00 supply vddl not found, using dummy regulator
[   51.972475] cmi: probe of SMB0001:00 failed with error -5
[   51.981952] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   51.981955] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[   52.005118] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input6
[   52.169198] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   52.189248] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[   52.227715] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   52.227782] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   52.227856] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[   52.227942] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[   52.232968] libphy: r8169: probed
[   52.233344] r8169 0000:02:00.0 eth0: RTL8168h/8111h, fc:45:96:56:3e:88, XID 54100800, IRQ 39
[   52.233346] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   52.235213] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   52.267361] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   52.267365] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   52.267366] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   52.267368] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   52.267369] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   52.267371] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[   52.267372] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   52.272288] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   52.272345] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   52.272347] cfg80211: failed to load regulatory.db
[   52.312313] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.2/sound/card1/input10
[   52.312524] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input11
[   52.312577] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input12
[   52.549082] hid-generic 0018:0416:C300.0001: hidraw0: I2C HID v1.00 Device [BMA250E:00 0416:C300] on i2c-BMA250E:00
[   52.550230] input: PNP0C50:00 06CB:16C9 Touchscreen as /devices/platform/AMD0010:01/i2c-1/i2c-PNP0C50:00/0018:06CB:16C9.0002/input/input13
[   52.550329] hid-generic 0018:06CB:16C9.0002: input,hidraw1: I2C HID v1.00 Device [PNP0C50:00 06CB:16C9] on i2c-PNP0C50:00
[   52.577197] kvm: disabled by bios
[   52.608246] kvm: disabled by bios
[   52.753361] MCE: In-kernel MCE decoding enabled.
[   52.789487] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x595f04)
[   52.790324] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   52.802853] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0e.
[   52.816028] psmouse serio1: elantech: Elan sample query result 07, 68, 86
[   52.881350] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[   52.941162] input: PNP0C50:00 06CB:16C9 as /devices/platform/AMD0010:01/i2c-1/i2c-PNP0C50:00/0018:06CB:16C9.0002/input/input15
[   52.941255] hid-multitouch 0018:06CB:16C9.0002: input,hidraw0: I2C HID v1.00 Device [PNP0C50:00 06CB:16C9] on i2c-PNP0C50:00
[   53.240881] ath10k_pci 0000:03:00.0: qca9377 hw1.0 target 0x05020000 chip_id 0x003820ff sub 17aa:4035
[   53.240887] ath10k_pci 0000:03:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[   53.241956] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[   53.387439] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   53.401824] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[   53.530636] mousedev: PS/2 mouse device common for all mice
[   54.447891] media: Linux media interface: v0.10
[   54.509854] Bluetooth: Core ver 2.22
[   54.510087] NET: Registered protocol family 31
[   54.510088] Bluetooth: HCI device and connection manager initialized
[   54.510093] Bluetooth: HCI socket layer initialized
[   54.510095] Bluetooth: L2CAP socket layer initialized
[   54.510103] Bluetooth: SCO socket layer initialized
[   54.551128] videodev: Linux video capture interface: v2.00
[   54.881192] usbcore: registered new interface driver btusb
[   54.894414] uvcvideo: Found UVC 1.00 device EasyCamera (174f:2409)
[   54.904123] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[   54.904127] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[   54.904129] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[   54.904514] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17
[   54.905235] usbcore: registered new interface driver uvcvideo
[   54.905237] USB Video Class driver (1.1.1)
[   55.594384] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[   55.597185] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[   55.597816] ath10k_pci 0000:03:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   55.604101] ath: EEPROM regdomain: 0x6c
[   55.604104] ath: EEPROM indicates we should expect a direct regpair map
[   55.604106] ath: Country alpha2 being used: 00
[   55.604107] ath: Regpair used: 0x6c
[   55.659150] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[   56.427771] kauditd_printk_skb: 9 callbacks suppressed
[   56.427774] audit: type=1130 audit(1544032206.963:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   56.494271] audit: type=1130 audit(1544032207.027:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   56.501214] audit: type=1130 audit(1544032207.033:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   56.840689] audit: type=1130 audit(1544032207.373:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   59.211285] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[   59.214255] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[   59.226865] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   60.614054] audit: type=1131 audit(1544032211.147:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   64.185265] wlp3s0: authenticate with 90:72:82:8a:35:65
[   64.218764] wlp3s0: send auth to 90:72:82:8a:35:65 (try 1/3)
[   64.219490] wlp3s0: authenticated
[   64.222809] wlp3s0: associate with 90:72:82:8a:35:65 (try 1/3)
[   64.224564] wlp3s0: RX AssocResp from 90:72:82:8a:35:65 (capab=0x411 status=0 aid=4)
[   64.227030] wlp3s0: associated
[   64.292890] wlp3s0: Limiting TX power to 17 (20 - 3) dBm as advertised by 90:72:82:8a:35:65
[   64.294730] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   64.373158] audit: type=1130 audit(1544032214.903:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=netctl@caellepa comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   64.398275] audit: type=1130 audit(1544032214.930:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   64.399589] audit: type=1130 audit(1544032214.933:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   64.477197] 8021q: 802.1Q VLAN Support v1.8
[   85.104828] audit: type=1006 audit(1544032235.637:29): pid=917 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   85.158875] audit: type=1130 audit(1544032235.690:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   85.169626] audit: type=1006 audit(1544032235.703:31): pid=979 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   85.405505] audit: type=1130 audit(1544032235.937:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   87.985194] [drm] DM: FBC alloc 5081664
[   93.867123] audit: type=1130 audit(1544032244.400:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   94.270030] audit: type=1130 audit(1544032244.803:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Well, I realised I originally tried downgrading to the wrong kernel version. So, I fixed that. Upon fixing it I found that launching into X gave me the same hung state as exiting suspend did before.

However, I've now messed things up more. I'm getting a LKS error:

 systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service: static: vendor preset: disabled)
Active: failed (Result: exit-code) since Wed 2018-12-05 19:35:40 GMT: 3min 55s ago
Docs: man:systemd-modules-load.service(8)
          man:modules-load.d(5)
Process: 359 ExecStart=/usr/lib/system/systemd-modules-load (code=exited, status=1/FAILURE)
Main PID: 359 (code-exited, status=1/FAILURE)

Dec 05 19:35:40 tatws systemd-modules-load(359): libkmod: kmod_config_parse: /etc/modprobe.d/nobeep.conf line1: ignoring bad line starting with '@blacklist'
Dec 05 19:35:40 tatws systemd-modules-load(359): Failed to lookup module alias 'msr': Function not implemented
Dec 05 19:35:40 tatws systemd-modules-load(359): Failed ot lookup module alias 'coretemp': Function not implemented
Dec 05 19:35:40 tatws systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
Dec 05 19:35:40 tatws systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
Dec 05 19:35:40 tatws systemd[1]: Failed to start Load Kernel Modules.
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.

The commands I used to downgrade were:

sudo pacman -U https://archive.archlinux.org/packages/l/linux/linux-4.18.arch1-1-x86_64.pkg.tar.xz https://archive.archlinux.org/packages/l/linux-headers/linux-headers-4.18.arch1-1-x86_64.pkg.tar.xz
mkinitcpio -p linux
grub-mkconfig -o /boot/grub/grub.cfg

I'm guessing I may need to change something in grub/the initramfs? Sorry, I think I've gotten overly emotionally invested, and am spending less time than I ought checking the wiki before doing things - I'm kind of busy with work.

I tried switching back from the downgrade to both the current lts and the linux-hardened that I also happened to have on there, however, I still get the LKS error, and I cannot access wifi-menu. The netctl I have set to run on boot also fails. Rfkill also seems to have dissappeared (rfkill: cannot open /dev/rfkill: No such file or directory) - not sure what I did to make that happen.

Is there a way to get the terminal output to be sent directly to a file? I have tried nc termbin.com, screen, and script; the latter two, I couldn't honestly figure out where the files go. I'll recheck how I set ranger's search function. When I have X running the font is often too large to see, too, as I've set a larger size in a fontconfig. I'll have to change the Alt+PGUP binding that (I believe) lets you scroll, as I don't have a PGUP key (the keyboard was designed for alt/ctrl+up iirc).

Edit: Cohesion.

Last edited by ngutwtan se wyrthstapa (2018-12-05 20:05:32)

seth · 2018-12-05 21:18:05

[    0.000000] Linux version 4.19.4-arch1-1-ARCH (builduser@heftig-22537) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Fri Nov 23 09:06:58 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg0-root rw cryptdevice=/dev/sda3:luks:allow-discards root=dev/mapper/vg0-root quiet

That's not the lts kernel (not even on a try, see "vmlinuz-linux") and the standard mistake is to forget to mount the /boot partition before installing the kernel (the systemd-modules-load failure being another symptom)

Arch Linux

#1 2018-12-04 20:00:21

X crashes upon turning the screen back on/coming out of suspend

#2 2018-12-04 21:43:59

Re: X crashes upon turning the screen back on/coming out of suspend

#3 2018-12-04 22:07:03

Re: X crashes upon turning the screen back on/coming out of suspend

#4 2018-12-04 22:14:31

Re: X crashes upon turning the screen back on/coming out of suspend

#5 2018-12-04 22:57:32

Re: X crashes upon turning the screen back on/coming out of suspend

#6 2018-12-05 08:30:50

Re: X crashes upon turning the screen back on/coming out of suspend

#7 2018-12-05 17:33:14

Re: X crashes upon turning the screen back on/coming out of suspend

#8 2018-12-05 17:38:00

Re: X crashes upon turning the screen back on/coming out of suspend

#9 2018-12-05 20:03:35

Re: X crashes upon turning the screen back on/coming out of suspend

#10 2018-12-05 21:18:05

Re: X crashes upon turning the screen back on/coming out of suspend

Board footer