Maybe the USB cable is bad?

duyinthee · 2018-12-25 03:24:13

I am using Arch linux on Dell 3443.
All of USB port are not working.

I got these error in dmesg:

[    3.524632] usb 1-1-port8: Cannot enable. Maybe the USB cable is bad?
[    4.451259] usb 1-1-port8: Cannot enable. Maybe the USB cable is bad?
[    4.451381] usb 1-1-port8: attempt power cycle
[    5.624516] usb 1-1-port8: Cannot enable. Maybe the USB cable is bad?
[    6.491096] usb 1-1-port8: Cannot enable. Maybe the USB cable is bad?
[    6.491222] usb 1-1-port8: unable to enumerate USB device

I dismantle the laptop and check USB ports on Motherboard.
Everything looks fine, I think (cables, lead points on circuit board, etc...), I don't understand anything though.

I understand this is hardware issue. Why I post my problem is that I wonder anyone here experience same issue and have whatever suggestion.

seth · 2018-12-25 09:00:31

Try to boot a different system (eg. some live distro) and see whether the problem exists there as well.
If not, please paste a complete dmesg, the ouput of "lsusb" and elaborate on "not working".
Might be usb autosuspend, https://wiki.archlinux.org/index.php/Po … utosuspend
usbcore.autosuspend=-1 should™ disable it (but some PM tool might alter it at runtime)

duyinthee · 2018-12-25 10:17:52

I have tested in Fedora 29 live cd. The problem still exist.
Now, not only USB, also Webcam is not working.

my dmesg is

[    0.000000] Linux version 4.19.12-arch1-1-ARCH (builduser@heftig-21538) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Fri Dec 21 13:56:54 UTC 2018
[    0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f9f8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f9f9000-0x000000009fdbffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009fdc0000-0x00000000a3b8efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a3b8f000-0x00000000a43c0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a43c1000-0x00000000a43e8fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000a43e9000-0x00000000a4d1cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a4d1d000-0x00000000a4ffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a4fff000-0x00000000a4ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a5800000-0x00000000a7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000256ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x9ce8d018-0x9ce9d057] usable ==> usable
[    0.000000] e820: update [mem 0x9ce8d018-0x9ce9d057] usable ==> usable
[    0.000000] e820: update [mem 0x9ce80018-0x9ce8c057] usable ==> usable
[    0.000000] e820: update [mem 0x9ce80018-0x9ce8c057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009ce80017] usable
[    0.000000] reserve setup_data: [mem 0x000000009ce80018-0x000000009ce8c057] usable
[    0.000000] reserve setup_data: [mem 0x000000009ce8c058-0x000000009ce8d017] usable
[    0.000000] reserve setup_data: [mem 0x000000009ce8d018-0x000000009ce9d057] usable
[    0.000000] reserve setup_data: [mem 0x000000009ce9d058-0x000000009f9f8fff] usable
[    0.000000] reserve setup_data: [mem 0x000000009f9f9000-0x000000009fdbffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009fdc0000-0x00000000a3b8efff] usable
[    0.000000] reserve setup_data: [mem 0x00000000a3b8f000-0x00000000a43c0fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000a43c1000-0x00000000a43e8fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000a43e9000-0x00000000a4d1cfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000a4d1d000-0x00000000a4ffefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000a4fff000-0x00000000a4ffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000a5800000-0x00000000a7ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000256ffffff] usable
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0xa43c9000  ACPI 2.0=0xa43c9000  ESRT=0xa4eead98  SMBIOS=0xf05b0  MPS=0xfd950 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Dell Inc. Inspiron 3443/0HYRJ5, BIOS A09 01/29/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2194.802 MHz processor
[    0.002227] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002230] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002237] last_pfn = 0x257000 max_arch_pfn = 0x400000000
[    0.002241] MTRR default type: uncachable
[    0.002242] MTRR fixed ranges enabled:
[    0.002243]   00000-9FFFF write-back
[    0.002244]   A0000-BFFFF uncachable
[    0.002245]   C0000-DFFFF write-protect
[    0.002246]   E0000-E7FFF write-through
[    0.002246]   E8000-FFFFF write-protect
[    0.002247] MTRR variable ranges enabled:
[    0.002248]   0 base 0000000000 mask 7F80000000 write-back
[    0.002249]   1 base 0080000000 mask 7FE0000000 write-back
[    0.002250]   2 base 00A0000000 mask 7FFC000000 write-back
[    0.002251]   3 base 00A4000000 mask 7FFF000000 write-back
[    0.002251]   4 base 0100000000 mask 7F00000000 write-back
[    0.002252]   5 base 0200000000 mask 7FC0000000 write-back
[    0.002253]   6 base 0240000000 mask 7FF0000000 write-back
[    0.002253]   7 base 0250000000 mask 7FFC000000 write-back
[    0.002254]   8 base 0254000000 mask 7FFE000000 write-back
[    0.002255]   9 base 0256000000 mask 7FFF000000 write-back
[    0.003027] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003209] e820: update [mem 0xa5000000-0xffffffff] usable ==> reserved
[    0.003214] last_pfn = 0xa5000 max_arch_pfn = 0x400000000
[    0.011141] found SMP MP-table at [mem 0x000fdb60-0x000fdb6f] mapped at [(____ptrval____)]
[    0.011156] esrt: Reserving ESRT space from 0x00000000a4eead98 to 0x00000000a4eeadd0.
[    0.011163] Scanning 1 areas for low memory corruption
[    0.011166] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.011168] Using GB pages for direct mapping
[    0.011170] BRK [0x1c1001000, 0x1c1001fff] PGTABLE
[    0.011172] BRK [0x1c1002000, 0x1c1002fff] PGTABLE
[    0.011173] BRK [0x1c1003000, 0x1c1003fff] PGTABLE
[    0.011203] BRK [0x1c1004000, 0x1c1004fff] PGTABLE
[    0.011205] BRK [0x1c1005000, 0x1c1005fff] PGTABLE
[    0.011359] BRK [0x1c1006000, 0x1c1006fff] PGTABLE
[    0.011395] BRK [0x1c1007000, 0x1c1007fff] PGTABLE
[    0.011430] BRK [0x1c1008000, 0x1c1008fff] PGTABLE
[    0.011490] BRK [0x1c1009000, 0x1c1009fff] PGTABLE
[    0.011530] BRK [0x1c100a000, 0x1c100afff] PGTABLE
[    0.011574] Secure boot disabled
[    0.011575] RAMDISK: [mem 0x7f85a000-0x7fffefff]
[    0.011579] ACPI: Early table checksum verification disabled
[    0.011582] ACPI: RSDP 0x00000000A43C9000 000024 (v02 DELL  )
[    0.011585] ACPI: XSDT 0x00000000A43C9098 0000B4 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.011591] ACPI: FACP 0x00000000A43E0130 00010C (v05 DELL   WN09     01072009 AMI  00010013)
[    0.011596] ACPI: DSDT 0x00000000A43C91E0 016F4C (v02 DELL   WN09     01072009 INTL 20120913)
[    0.011599] ACPI: FACS 0x00000000A4D17F80 000040
[    0.011601] ACPI: APIC 0x00000000A43E0240 000084 (v03 DELL   WN09     01072009 AMI  00010013)
[    0.011604] ACPI: FPDT 0x00000000A43E02C8 000044 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.011607] ACPI: FIDT 0x00000000A43E0310 00009C (v01 DELL   WN09     01072009 AMI  00010013)
[    0.011610] ACPI: MCFG 0x00000000A43E03B0 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
[    0.011613] ACPI: HPET 0x00000000A43E03F0 000038 (v01 DELL   WN09     01072009 AMI. 00000005)
[    0.011616] ACPI: SSDT 0x00000000A43E0428 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.011619] ACPI: UEFI 0x00000000A43E0740 000042 (v01                 00000000      00000000)
[    0.011621] ACPI: SSDT 0x00000000A43E0788 000194 (v01 Intel  zpodd    00001000 INTL 20120913)
[    0.011625] ACPI: LPIT 0x00000000A43E0920 000094 (v01                 00000000      00000000)
[    0.011628] ACPI: SSDT 0x00000000A43E09B8 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[    0.011630] ACPI: ASF! 0x00000000A43E1638 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.011633] ACPI: SSDT 0x00000000A43E16D8 000539 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.011636] ACPI: SSDT 0x00000000A43E1C18 000B74 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.011639] ACPI: SSDT 0x00000000A43E2790 005C44 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.011642] ACPI: DMAR 0x00000000A43E83D8 0000D4 (v01 DELL   WN09     00000001 INTL 00000001)
[    0.011645] ACPI: CSRT 0x00000000A43E84B0 0000C4 (v01 DELL   WN09     00000001 INTL 20100528)
[    0.011648] ACPI: BGRT 0x00000000A43E8578 000038 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.011655] ACPI: Local APIC address 0xfee00000
[    0.011731] No NUMA configuration found
[    0.011732] Faking a node at [mem 0x0000000000000000-0x0000000256ffffff]
[    0.011735] NODE_DATA(0) allocated [mem 0x256ffc000-0x256ffffff]
[    0.011754] Zone ranges:
[    0.011755]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011757]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.011758]   Normal   [mem 0x0000000100000000-0x0000000256ffffff]
[    0.011759]   Device   empty
[    0.011760] Movable zone start for each node
[    0.011761] Early memory node ranges
[    0.011761]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.011762]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.011763]   node   0: [mem 0x0000000000100000-0x000000009f9f8fff]
[    0.011763]   node   0: [mem 0x000000009fdc0000-0x00000000a3b8efff]
[    0.011764]   node   0: [mem 0x00000000a4fff000-0x00000000a4ffffff]
[    0.011764]   node   0: [mem 0x0000000100000000-0x0000000256ffffff]
[    0.011767] Reserved but unavailable: 98 pages
[    0.011768] Initmem setup node 0 [mem 0x0000000000001000-0x0000000256ffffff]
[    0.011770] On node 0 totalpages: 2074470
[    0.011771]   DMA zone: 64 pages used for memmap
[    0.011771]   DMA zone: 24 pages reserved
[    0.011772]   DMA zone: 3997 pages, LIFO batch:0
[    0.011856]   DMA32 zone: 10400 pages used for memmap
[    0.011857]   DMA32 zone: 665545 pages, LIFO batch:63
[    0.026679]   Normal zone: 21952 pages used for memmap
[    0.026681]   Normal zone: 1404928 pages, LIFO batch:63
[    0.055295] Reserving Intel graphics memory at [mem 0xa6000000-0xa7ffffff]
[    0.055365] ACPI: PM-Timer IO Port: 0x1808
[    0.055367] ACPI: Local APIC address 0xfee00000
[    0.055374] ACPI: LAPIC_NMI (acpi_id[0x01] low dfl lint[0x8d])
[    0.055374] ACPI: NMI not connected to LINT 1!
[    0.055375] ACPI: LAPIC_NMI (acpi_id[0x02] low level lint[0x8d])
[    0.055376] ACPI: NMI not connected to LINT 1!
[    0.055376] ACPI: LAPIC_NMI (acpi_id[0x03] low res lint[0x1b])
[    0.055377] ACPI: NMI not connected to LINT 1!
[    0.055377] ACPI: LAPIC_NMI (acpi_id[0x04] high res lint[0x54])
[    0.055378] ACPI: NMI not connected to LINT 1!
[    0.055388] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.055391] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.055392] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.055393] ACPI: IRQ0 used by override.
[    0.055394] ACPI: IRQ9 used by override.
[    0.055396] Using ACPI (MADT) for SMP configuration information
[    0.055397] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.055408] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.055425] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.055427] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.055428] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.055429] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.055430] PM: Registered nosave memory: [mem 0x9ce80000-0x9ce80fff]
[    0.055431] PM: Registered nosave memory: [mem 0x9ce8c000-0x9ce8cfff]
[    0.055432] PM: Registered nosave memory: [mem 0x9ce8d000-0x9ce8dfff]
[    0.055433] PM: Registered nosave memory: [mem 0x9ce9d000-0x9ce9dfff]
[    0.055435] PM: Registered nosave memory: [mem 0x9f9f9000-0x9fdbffff]
[    0.055436] PM: Registered nosave memory: [mem 0xa3b8f000-0xa43c0fff]
[    0.055437] PM: Registered nosave memory: [mem 0xa43c1000-0xa43e8fff]
[    0.055437] PM: Registered nosave memory: [mem 0xa43e9000-0xa4d1cfff]
[    0.055438] PM: Registered nosave memory: [mem 0xa4d1d000-0xa4ffefff]
[    0.055439] PM: Registered nosave memory: [mem 0xa5000000-0xa57fffff]
[    0.055440] PM: Registered nosave memory: [mem 0xa5800000-0xa7ffffff]
[    0.055440] PM: Registered nosave memory: [mem 0xa8000000-0xf7ffffff]
[    0.055441] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.055441] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.055442] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.055442] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.055443] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.055443] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.055444] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.055444] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.055445] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.055445] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.055446] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.055448] [mem 0xa8000000-0xf7ffffff] available for PCI devices
[    0.055449] Booting paravirtualized kernel on bare hardware
[    0.055452] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.185042] random: get_random_bytes called from start_kernel+0x95/0x545 with crng_init=0
[    0.185049] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.185326] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[    0.185332] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.185333] pcpu-alloc: [0] 0 1 2 3 
[    0.185352] Built 1 zonelists, mobility grouping on.  Total pages: 2042030
[    0.185353] Policy zone: Normal
[    0.185355] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[    0.191185] Calgary: detecting Calgary via BIOS EBDA area
[    0.191187] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.219991] Memory: 7987768K/8297880K available (12300K kernel code, 1374K rwdata, 3640K rodata, 1532K init, 3860K bss, 310112K reserved, 0K cma-reserved)
[    0.220095] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.220100] Kernel/User page tables isolation: enabled
[    0.228011] ftrace: allocating 35548 entries in 139 pages
[    0.242083] rcu: Preemptible hierarchical RCU implementation.
[    0.242084] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.242085] rcu:     RCU dyntick-idle grace-period acceleration is enabled.
[    0.242085] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.242086] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.242087]  Tasks RCU enabled.
[    0.242087] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.243524] NR_IRQS: 20736, nr_irqs: 728, preallocated irqs: 16
[    0.243666] rcu:     Offload RCU callbacks from CPUs: (none).
[    0.243711] Console: colour dummy device 80x25
[    0.243715] console [tty0] enabled
[    0.243731] ACPI: Core revision 20180810
[    0.243966] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.243973] hpet clockevent registered
[    0.243978] APIC: Switch to symmetric I/O mode setup
[    0.243980] DMAR: Host address width 39
[    0.243981] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.243986] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.243986] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.243989] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.243990] DMAR: RMRR base: 0x000000a4efb000 end: 0x000000a4f09fff
[    0.243991] DMAR: RMRR base: 0x000000a5800000 end: 0x000000a7ffffff
[    0.243992] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[    0.243994] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.243994] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.243995] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.243996] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.244645] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.244646] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.245230] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.260647] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa30487bd7, max_idle_ns: 440795258162 ns
[    0.260660] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.50 BogoMIPS (lpj=7316006)
[    0.260662] pid_max: default: 32768 minimum: 301
[    0.261253] Security Framework initialized
[    0.261254] Yama: becoming mindful.
[    0.261259] AppArmor: AppArmor disabled by boot time parameter
[    0.262796] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.263590] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.263628] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.263653] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.263862] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.263862] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.263866] mce: CPU supports 7 MCE banks
[    0.263874] CPU0: Thermal monitoring enabled (TM1)
[    0.263885] process: using mwait in idle threads
[    0.263889] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.263890] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.263891] Spectre V2 : Mitigation: Full generic retpoline
[    0.263892] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.263892] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.263899] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.263900] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.263901] Speculative Store Bypass: Vulnerable
[    0.267824] Freeing SMP alternatives memory: 28K
[    0.274267] TSC deadline timer enabled
[    0.274269] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.293989] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.294034] ... version:                3
[    0.294034] ... bit width:              48
[    0.294035] ... generic registers:      4
[    0.294036] ... value mask:             0000ffffffffffff
[    0.294036] ... max period:             00007fffffffffff
[    0.294037] ... fixed-purpose events:   3
[    0.294037] ... event mask:             000000070000000f
[    0.300652] rcu: Hierarchical SRCU implementation.
[    0.324097] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.330656] smp: Bringing up secondary CPUs ...
[    0.370661] x86: Booting SMP configuration:
[    0.370663] .... node  #0, CPUs:      #1 #2 #3
[    0.451082] smp: Brought up 1 node, 4 CPUs
[    0.451082] smpboot: Max logical packages: 1
[    0.451082] smpboot: Total of 4 processors activated (17565.01 BogoMIPS)
[    0.454236] devtmpfs: initialized
[    0.454236] x86/mm: Memory block size: 128MB
[    0.454625] PM: Registering ACPI NVS region [mem 0xa43e9000-0xa4d1cfff] (9650176 bytes)
[    0.454625] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.454625] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.454625] pinctrl core: initialized pinctrl subsystem
[    0.454625] RTC time: 10:11:33, date: 12/25/18
[    0.454625] NET: Registered protocol family 16
[    0.454625] audit: initializing netlink subsys (disabled)
[    0.454625] audit: type=2000 audit(1545732693.209:1): state=initialized audit_enabled=0 res=1
[    0.454625] cpuidle: using governor ladder
[    0.454625] cpuidle: using governor menu
[    0.454625] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.454625] ACPI: bus type PCI registered
[    0.454625] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.454625] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.454625] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.454625] PCI: Using configuration type 1 for base access
[    0.454969] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.454969] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.454969] ACPI: Added _OSI(Module Device)
[    0.454969] ACPI: Added _OSI(Processor Device)
[    0.454969] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.454969] ACPI: Added _OSI(Processor Aggregator Device)
[    0.454969] ACPI: Added _OSI(Linux-Dell-Video)
[    0.454969] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.481159] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.484392] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.494718] ACPI: Dynamic OEM Table Load:
[    0.494723] ACPI: SSDT 0xFFFF94D18CCA4000 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.495404] ACPI: Dynamic OEM Table Load:
[    0.495409] ACPI: SSDT 0xFFFF94D18CD40000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.496130] ACPI: Dynamic OEM Table Load:
[    0.496134] ACPI: SSDT 0xFFFF94D18CD27C00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.498572] ACPI: Interpreter enabled
[    0.498603] ACPI: (supports S0 S3 S4 S5)
[    0.498604] ACPI: Using IOAPIC for interrupt routing
[    0.498640] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.499475] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.503004] ACPI: Power Resource [PG00] (on)
[    0.503473] ACPI: Power Resource [PG01] (on)
[    0.503943] ACPI: Power Resource [PG02] (on)
[    0.505679] ACPI: Power Resource [WRST] (off)
[    0.506070] ACPI: Power Resource [WRST] (off)
[    0.506466] ACPI: Power Resource [WRST] (off)
[    0.506861] ACPI: Power Resource [WRST] (off)
[    0.507274] ACPI: Power Resource [WRST] (off)
[    0.507665] ACPI: Power Resource [WRST] (off)
[    0.508048] ACPI: Power Resource [WRST] (off)
[    0.508428] ACPI: Power Resource [WRST] (off)
[    0.524263] ACPI: Power Resource [FN00] (off)
[    0.524349] ACPI: Power Resource [FN01] (off)
[    0.524435] ACPI: Power Resource [FN02] (off)
[    0.524517] ACPI: Power Resource [FN03] (off)
[    0.524600] ACPI: Power Resource [FN04] (off)
[    0.525868] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.525875] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.526677] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.526678] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.527357] PCI host bridge to bus 0000:00
[    0.527360] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.527361] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.527362] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.527364] pci_bus 0000:00: root bus resource [mem 0xa8000000-0xdfffffff window]
[    0.527365] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window]
[    0.527367] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.527375] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.527487] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.527498] pci 0000:00:02.0: reg 0x10: [mem 0xa9000000-0xa9ffffff 64bit]
[    0.527504] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.527508] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.527522] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.527652] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.527661] pci 0000:00:03.0: reg 0x10: [mem 0xaa214000-0xaa217fff 64bit]
[    0.527785] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.527803] pci 0000:00:14.0: reg 0x10: [mem 0xaa200000-0xaa20ffff 64bit]
[    0.527858] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.527951] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.527972] pci 0000:00:16.0: reg 0x10: [mem 0xaa21c000-0xaa21c01f 64bit]
[    0.528037] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.528178] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.528195] pci 0000:00:1b.0: reg 0x10: [mem 0xaa210000-0xaa213fff 64bit]
[    0.528242] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.528368] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.528437] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.528600] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.528671] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.528835] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.528905] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.529080] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[    0.529157] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.529326] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.529347] pci 0000:00:1d.0: reg 0x10: [mem 0xaa21a000-0xaa21a3ff]
[    0.529428] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.529528] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.529724] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.529739] pci 0000:00:1f.2: reg 0x10: [io  0x40b0-0x40b7]
[    0.529745] pci 0000:00:1f.2: reg 0x14: [io  0x40a0-0x40a3]
[    0.529751] pci 0000:00:1f.2: reg 0x18: [io  0x4090-0x4097]
[    0.529757] pci 0000:00:1f.2: reg 0x1c: [io  0x4080-0x4083]
[    0.529763] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.529770] pci 0000:00:1f.2: reg 0x24: [mem 0xaa219000-0xaa2197ff]
[    0.529802] pci 0000:00:1f.2: PME# supported from D3hot
[    0.529891] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.529906] pci 0000:00:1f.3: reg 0x10: [mem 0xaa218000-0xaa2180ff 64bit]
[    0.529924] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.530075] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.530160] pci 0000:06:00.0: [168c:0036] type 00 class 0x028000
[    0.530208] pci 0000:06:00.0: reg 0x10: [mem 0xaa100000-0xaa17ffff 64bit]
[    0.530264] pci 0000:06:00.0: reg 0x30: [mem 0xaa180000-0xaa18ffff pref]
[    0.530384] pci 0000:06:00.0: supports D1 D2
[    0.530386] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.530575] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    0.530580] pci 0000:00:1c.2:   bridge window [mem 0xaa100000-0xaa1fffff]
[    0.530675] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
[    0.530708] pci 0000:07:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.530739] pci 0000:07:00.0: reg 0x18: [mem 0xaa000000-0xaa000fff 64bit]
[    0.530760] pci 0000:07:00.0: reg 0x20: [mem 0xc0000000-0xc0003fff 64bit pref]
[    0.530871] pci 0000:07:00.0: supports D1 D2
[    0.530872] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.531055] pci 0000:00:1c.3: PCI bridge to [bus 07]
[    0.531058] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.531061] pci 0000:00:1c.3:   bridge window [mem 0xaa000000-0xaa0fffff]
[    0.531065] pci 0000:00:1c.3:   bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[    0.531119] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    0.534847] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.534915] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.534982] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.535048] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.535113] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.535179] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.535245] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.535310] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.550662] dw_dmac INTL9C60:00: Missing DT data
[    0.550670] fbcon: Taking over console
[    0.574102] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    0.574275] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.574275] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.574275] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.574275] vgaarb: loaded
[    0.574275] ACPI: bus type USB registered
[    0.574275] usbcore: registered new interface driver usbfs
[    0.574275] usbcore: registered new interface driver hub
[    0.574275] usbcore: registered new device driver usb
[    0.620971] pps_core: LinuxPPS API ver. 1 registered
[    0.620973] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.620975] PTP clock support registered
[    0.620981] EDAC MC: Ver: 3.0.0
[    0.621047] Registered efivars operations
[    0.621047] PCI: Using ACPI for IRQ routing
[    0.624963] PCI: pci_cache_line_size set to 64 bytes
[    0.625014] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.625015] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.625016] e820: reserve RAM buffer [mem 0x9ce80018-0x9fffffff]
[    0.625017] e820: reserve RAM buffer [mem 0x9ce8d018-0x9fffffff]
[    0.625018] e820: reserve RAM buffer [mem 0x9f9f9000-0x9fffffff]
[    0.625019] e820: reserve RAM buffer [mem 0xa3b8f000-0xa3ffffff]
[    0.625020] e820: reserve RAM buffer [mem 0xa5000000-0xa7ffffff]
[    0.625021] e820: reserve RAM buffer [mem 0x257000000-0x257ffffff]
[    0.625129] NetLabel: Initializing
[    0.625130] NetLabel:  domain hash size = 128
[    0.625131] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.625144] NetLabel:  unlabeled traffic allowed by default
[    0.625176] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.625176] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.629339] clocksource: Switched to clocksource tsc-early
[    0.637206] VFS: Disk quotas dquot_6.6.0
[    0.637223] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.637300] pnp: PnP ACPI init
[    0.637550] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.637552] system 00:00: [io  0xffff] has been reserved
[    0.637554] system 00:00: [io  0xffff] has been reserved
[    0.637555] system 00:00: [io  0xffff] has been reserved
[    0.637557] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.637558] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.637563] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.637618] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.637666] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.637670] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.637719] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.637722] system 00:03: [mem 0xfe800000-0xfe802fff] has been reserved
[    0.637725] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.637759] pnp 00:04: Plug and Play ACPI device, IDs DLL065a SYN0600 SYN0002 PNP0f13 (active)
[    0.637784] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.638013] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.638015] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.638016] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.638018] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.638019] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.638021] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.638022] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.638024] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.638026] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.638028] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.638029] system 00:06: [mem 0xa8010000-0xa801ffff] has been reserved
[    0.638031] system 00:06: [mem 0xa8000000-0xa800ffff] has been reserved
[    0.638034] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.638680] system 00:07: [mem 0xfe102000-0xfe102fff] has been reserved
[    0.638682] system 00:07: [mem 0xfe104000-0xfe104fff] has been reserved
[    0.638683] system 00:07: [mem 0xfe106000-0xfe106fff] has been reserved
[    0.638685] system 00:07: [mem 0xfe10e000-0xfe10efff] has been reserved
[    0.638688] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.643712] pnp: PnP ACPI: found 8 devices
[    0.649377] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.649390] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.649392] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.649394] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.649415] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa8100000-0xa82fffff]
[    0.649419] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa8300000-0xa84fffff 64bit pref]
[    0.649422] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.649424] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.649426] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.649430] pci 0000:00:1c.0:   bridge window [mem 0xa8100000-0xa82fffff]
[    0.649433] pci 0000:00:1c.0:   bridge window [mem 0xa8300000-0xa84fffff 64bit pref]
[    0.649437] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    0.649441] pci 0000:00:1c.2:   bridge window [mem 0xaa100000-0xaa1fffff]
[    0.649447] pci 0000:00:1c.3: PCI bridge to [bus 07]
[    0.649449] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.649453] pci 0000:00:1c.3:   bridge window [mem 0xaa000000-0xaa0fffff]
[    0.649456] pci 0000:00:1c.3:   bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[    0.649460] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    0.649470] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.649471] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.649473] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.649474] pci_bus 0000:00: resource 7 [mem 0xa8000000-0xdfffffff window]
[    0.649475] pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfe113fff window]
[    0.649477] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.649478] pci_bus 0000:04: resource 1 [mem 0xa8100000-0xa82fffff]
[    0.649479] pci_bus 0000:04: resource 2 [mem 0xa8300000-0xa84fffff 64bit pref]
[    0.649481] pci_bus 0000:06: resource 1 [mem 0xaa100000-0xaa1fffff]
[    0.649483] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
[    0.649484] pci_bus 0000:07: resource 1 [mem 0xaa000000-0xaa0fffff]
[    0.649485] pci_bus 0000:07: resource 2 [mem 0xc0000000-0xc00fffff 64bit pref]
[    0.649644] NET: Registered protocol family 2
[    0.649775] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.649804] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.649917] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.650080] TCP: Hash tables configured (established 65536 bind 65536)
[    0.650113] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.650138] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.650194] NET: Registered protocol family 1
[    0.650199] NET: Registered protocol family 44
[    0.650207] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.670777] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c6 took 19851 usecs
[    0.670799] PCI: CLS 64 bytes, default 64
[    0.670833] Unpacking initramfs...
[    0.783928] Freeing initrd memory: 7828K
[    0.783964] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
[    0.783982] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.783996] software IO TLB: mapped [mem 0x97dd6000-0x9bdd6000] (64MB)
[    0.784110] Scanning for low memory corruption every 60 seconds
[    0.784606] Initialise system trusted keyrings
[    0.784613] Key type blacklist registered
[    0.784655] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.785742] zbud: loaded
[    0.785999] pstore: using zstd compression
[    0.787045] Key type asymmetric registered
[    0.787047] Asymmetric key parser 'x509' registered
[    0.787056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.787090] io scheduler noop registered
[    0.787091] io scheduler deadline registered
[    0.787120] io scheduler cfq registered (default)
[    0.787121] io scheduler mq-deadline registered
[    0.787122] io scheduler kyber registered
[    0.787141] io scheduler bfq registered
[    0.788099] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
[    0.788115] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
[    0.788129] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
[    0.788143] pcieport 0000:00:1c.4: Signaling PME with IRQ 45
[    0.788167] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.788227] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.788304] efifb: probing for efifb
[    0.788316] efifb: framebuffer at 0xb0000000, using 4128k, total 4128k
[    0.788317] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.788318] efifb: scrolling: redraw
[    0.788319] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.788395] Console: switching to colour frame buffer device 170x48
[    0.790759] fb0: EFI VGA frame buffer device
[    0.790768] intel_idle: MWAIT substates: 0x11142120
[    0.790769] intel_idle: v0.4.1 model 0x3D
[    0.790973] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.791049] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.791058] ACPI: Sleep Button [SLPB]
[    0.791090] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.791098] ACPI: Lid Switch [LID0]
[    0.791124] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.791130] ACPI: Power Button [PWRB]
[    0.791159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.791165] ACPI: Power Button [PWRF]
[    0.815819] thermal LNXTHERM:00: registered as thermal_zone0
[    0.815820] ACPI: Thermal Zone [THM] (50 C)
[    0.816310] thermal LNXTHERM:01: registered as thermal_zone1
[    0.816311] ACPI: Thermal Zone [TZ00] (28 C)
[    0.816560] thermal LNXTHERM:02: registered as thermal_zone2
[    0.816561] ACPI: Thermal Zone [TZ01] (30 C)
[    0.816779] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.817758] usbcore: registered new interface driver usbserial_generic
[    0.817763] usbserial: USB Serial support registered for generic
[    0.817789] rtc_cmos 00:01: RTC can wake from S4
[    0.817934] rtc_cmos 00:01: registered as rtc0
[    0.817948] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.818011] intel_pstate: Intel P-state driver initializing
[    0.818201] ledtrig-cpu: registered to indicate activity on CPUs
[    0.818820] NET: Registered protocol family 10
[    0.828281] Segment Routing with IPv6
[    0.828335] NET: Registered protocol family 17
[    0.829003] RAS: Correctable Errors collector initialized.
[    0.829086] microcode: sig=0x306d4, pf=0x40, revision=0x2a
[    0.829322] microcode: Microcode Update Driver: v2.2.
[    0.829346] sched_clock: Marking stable (828984592, 292308)->(888717685, -59440785)
[    0.829867] registered taskstats version 1
[    0.829882] Loading compiled-in X.509 certificates
[    0.833328] Loaded X.509 cert 'Build time autogenerated kernel key: b763d1222bd30dcded0f0cbe6aca835d8ac504e4'
[    0.833346] zswap: loaded using pool lzo/zbud
[    0.836369] Key type big_key registered
[    0.837212]   Magic number: 14:591:174
[    0.837260] acpi device:37: hash matches
[    0.837270] acpi device:0a: hash matches
[    0.837316] rtc_cmos 00:01: setting system clock to 2018-12-25 10:11:33 UTC (1545732693)
[    1.089073] Freeing unused decrypted memory: 2040K
[    1.277235] Freeing unused kernel image memory: 1532K
[    1.277272] Write protecting the kernel read-only data: 18432k
[    1.278900] Freeing unused kernel image memory: 2008K
[    1.279046] Freeing unused kernel image memory: 456K
[    1.286768] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.286769] x86/mm: Checking user space page tables
[    1.294406] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.294409] Run /init as init process
[    1.372325] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.376753] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.376819] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.382542] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.383917] ehci-pci: EHCI PCI platform driver
[    1.384493] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.384502] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.384515] ehci-pci 0000:00:1d.0: debug port 2
[    1.388425] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.388449] ehci-pci 0000:00:1d.0: irq 23, io mem 0xaa21a000
[    1.393454] SCSI subsystem initialized
[    1.400671] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.400733] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.400736] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.400738] usb usb1: Product: EHCI Host Controller
[    1.400740] usb usb1: Manufacturer: Linux 4.19.12-arch1-1-ARCH ehci_hcd
[    1.400742] usb usb1: SerialNumber: 0000:00:1d.0
[    1.400983] hub 1-0:1.0: USB hub found
[    1.401047] hub 1-0:1.0: 2 ports detected
[    1.401519] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.401528] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.402590] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[    1.402595] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.402786] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.402789] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.402791] usb usb2: Product: xHCI Host Controller
[    1.402793] usb usb2: Manufacturer: Linux 4.19.12-arch1-1-ARCH xhci-hcd
[    1.402795] usb usb2: SerialNumber: 0000:00:14.0
[    1.402943] hub 2-0:1.0: USB hub found
[    1.402957] hub 2-0:1.0: 11 ports detected
[    1.404625] libata version 3.00 loaded.
[    1.409103] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.409109] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.409114] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.409165] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.409168] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.409170] usb usb3: Product: xHCI Host Controller
[    1.409172] usb usb3: Manufacturer: Linux 4.19.12-arch1-1-ARCH xhci-hcd
[    1.409174] usb usb3: SerialNumber: 0000:00:14.0
[    1.409309] hub 3-0:1.0: USB hub found
[    1.409319] hub 3-0:1.0: 4 ports detected
[    1.409719] ahci 0000:00:1f.2: version 3.0
[    1.420012] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    1.420016] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.420571] scsi host0: ahci
[    1.420762] scsi host1: ahci
[    1.420895] scsi host2: ahci
[    1.421050] scsi host3: ahci
[    1.421134] ata1: SATA max UDMA/133 abar m2048@0xaa219000 port 0xaa219100 irq 47
[    1.421136] ata2: SATA max UDMA/133 abar m2048@0xaa219000 port 0xaa219180 irq 47
[    1.421137] ata3: DUMMY
[    1.421138] ata4: DUMMY
[    1.425366] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.730745] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.734739] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.734765] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.736589] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8E2, 1.01, max UDMA/133
[    1.739002] ata2.00: configured for UDMA/133
[    1.741219] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30003, max UDMA/133
[    1.741224] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.747758] ata1.00: configured for UDMA/133
[    1.748099] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0003 PQ: 0 ANSI: 5
[    1.749730] scsi 1:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ8E2    1.01 PQ: 0 ANSI: 5
[    1.790792] tsc: Refined TSC clocksource calibration: 2194.918 MHz
[    1.790810] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
[    1.790856] clocksource: Switched to clocksource tsc
[    1.804511] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.804514] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.804520] sd 0:0:0:0: [sda] Write Protect is off
[    1.804523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.804530] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.836166] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.836170] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.836525] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.864526]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    1.865684] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.877840] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[    1.877843] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.878211] hub 1-1:1.0: USB hub found
[    1.878283] hub 1-1:1.0: 8 ports detected
[    2.157370] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
[    2.320856] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=6a04, bcdDevice=45.14
[    2.320858] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.320860] usb 1-1.5: Product: Integrated_Webcam_HD
[    2.320861] usb 1-1.5: Manufacturer: CNFDH85K483010000B32
[    2.404027] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[    2.413663] random: fast init done
[    2.508734] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01
[    2.508737] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.580732] usb 1-1.7: new full-speed USB device number 5 using ehci-pci
[    2.680700] usb 1-1.7: New USB device found, idVendor=04f3, idProduct=2020, bcdDevice=11.11
[    2.680705] usb 1-1.7: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[    2.680708] usb 1-1.7: Product: Touchscreen
[    2.680710] usb 1-1.7: Manufacturer: ELAN
[    2.688298] hidraw: raw HID events driver (C) Jiri Kosina
[    2.699707] usbcore: registered new interface driver usbhid
[    2.699708] usbhid: USB HID core driver
[    2.701770] input: ELAN Touchscreen Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.7/1-1.7:1.0/0003:04F3:2020.0001/input/input6
[    2.701808] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.7/1-1.7:1.0/0003:04F3:2020.0001/input/input7
[    2.701842] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.7/1-1.7:1.0/0003:04F3:2020.0001/input/input8
[    2.701931] hid-generic 0003:04F3:2020.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:1d.0-1.7/input0
[    2.707807] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.7/1-1.7:1.0/0003:04F3:2020.0001/input/input10
[    2.707918] hid-multitouch 0003:04F3:2020.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:1d.0-1.7/input0
[    2.757377] usb 1-1.8: new high-speed USB device number 6 using ehci-pci
[    3.147999] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.627907] usb 1-1-port8: Cannot enable. Maybe the USB cable is bad?
[    3.700730] usb 1-1.8: new high-speed USB device number 7 using ehci-pci
[    4.117306] random: crng init done
[    4.392315] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.407618] systemd[1]: Detected architecture x86-64.
[    4.436663] systemd[1]: Set hostname to <mshDell3443>.
[    4.571266] usb 1-1-port8: Cannot enable. Maybe the USB cable is bad?
[    4.571535] usb 1-1-port8: attempt power cycle
[    5.673084] systemd[1]: Reached target Remote File Systems.
[    5.673357] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.673635] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.674610] systemd[1]: Created slice User and Session Slice.
[    5.677021] systemd[1]: Listening on Process Core Dump Socket.
[    5.677157] systemd[1]: Listening on udev Control Socket.
[    5.677220] systemd[1]: Reached target Slices.
[    5.747696] usb 1-1-port8: Cannot enable. Maybe the USB cable is bad?
[    5.781022] EXT4-fs (sda2): re-mounted. Opts: (null)
[    5.920104] audit: type=1130 audit(1545732698.576:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.944596] audit: type=1130 audit(1545732698.603:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.966924] audit: type=1130 audit(1545732698.623:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.030525] audit: type=1130 audit(1545732698.686:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.073628] audit: type=1130 audit(1545732698.730:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.203475] audit: type=1130 audit(1545732698.860:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.593840] audit: type=1130 audit(1545732699.250:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.597516] usb 1-1-port8: Cannot enable. Maybe the USB cable is bad?
[    6.598772] usb 1-1-port8: unable to enumerate USB device
[    6.939532] ACPI: AC Adapter [AC] (off-line)
[    6.964135] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    6.964164] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    7.020757] i2c_hid i2c-DLL0654:00: i2c-DLL0654:00 supply vdd not found, using dummy regulator
[    7.020775] i2c_hid i2c-DLL0654:00: Linked as a consumer to regulator.0
[    7.020777] i2c_hid i2c-DLL0654:00: i2c-DLL0654:00 supply vddl not found, using dummy regulator
[    7.020861] INT3435:00: ttyS0 at MMIO 0xfe10d000 (irq = 13, base_baud = 6250000) is a 16550A
[    7.028583] input: DLL0654:00 06CB:2985 Mouse as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0654:00/0018:06CB:2985.0002/input/input14
[    7.028640] hid-generic 0018:06CB:2985.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL0654:00 06CB:2985] on i2c-DLL0654:00
[    7.030279] input: DELL Wireless hotkeys as /devices/virtual/input/input16
[    7.092103] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    7.241629] battery: ACPI: Battery Slot [BAT0] (battery present)
[    7.402322] libphy: r8169: probed
[    7.402522] r8169 0000:07:00.0 eth0: RTL8106e, 74:e6:e2:34:83:c5, XID 44900000, IRQ 49
[    7.449167] Bluetooth: Core ver 2.22
[    7.449181] NET: Registered protocol family 31
[    7.449182] Bluetooth: HCI device and connection manager initialized
[    7.449184] Bluetooth: HCI socket layer initialized
[    7.449187] Bluetooth: L2CAP socket layer initialized
[    7.449193] Bluetooth: SCO socket layer initialized
[    7.539346] Linux agpgart interface v0.103
[    7.574978] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.575184] usbcore: registered new interface driver btusb
[    7.576989] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.582437] input: PC Speaker as /devices/platform/pcspkr/input/input17
[    7.653968] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    7.654267] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    7.743140] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    7.743142] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    7.743143] RAPL PMU: hw unit of domain package 2^-14 Joules
[    7.743144] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    7.743145] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    7.824371] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.824374] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.824375] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.824377] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    7.824378] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    7.824379] snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x19
[    7.824381] snd_hda_codec_realtek hdaudioC1D0:      Headphone Mic=0x1a
[    7.824382] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    7.882341] cryptd: max_cpu_qlen set to 1000
[    7.897137] media: Linux media interface: v0.10
[    7.901335] mousedev: PS/2 mouse device common for all mice
[    7.906110] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    7.906114] cfg80211: failed to load regulatory.db
[    7.972097] videodev: Linux video capture interface: v2.00
[    7.989495] ath9k 0000:06:00.0: enabling device (0000 -> 0002)
[    7.998723] usbcore: registered new interface driver ath3k
[    8.006687] AVX2 version of gcm_enc/dec engaged.
[    8.006689] AES CTR mode by8 optimization enabled
[    8.006787] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    8.009228] ath: phy0: WB335 1-ANT card detected
[    8.009231] ath: phy0: Set BT/WLAN RX diversity capability
[    8.018885] ath: phy0: Enable LNA combining
[    8.020129] ath: phy0: ASPM enabled: 0x43
[    8.020133] ath: EEPROM regdomain: 0x60
[    8.020134] ath: EEPROM indicates we should expect a direct regpair map
[    8.020138] ath: Country alpha2 being used: 00
[    8.020139] ath: Regpair used: 0x60
[    8.045768] usb 1-1.6: USB disconnect, device number 4
[    8.048536] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[    8.051778] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.052214] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffff9a3fc1400000, irq=18
[    8.123856] VFIO - User Level meta-driver version: 0.3
[    8.126115] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    8.126842] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    8.184535] iTCO_vendor_support: vendor-support=0
[    8.199774] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.199825] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    8.199917] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.240555] intel-spi intel-spi: mx25l6405d (8192 Kbytes)
[    8.257356] usb 1-1.6: new full-speed USB device number 10 using ehci-pci
[    8.274015] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input21
[    8.298457] Creating 1 MTD partitions on "intel-spi":
[    8.298461] 0x000000000000-0x000000800000 : "BIOS"
[    8.337450] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6a04)
[    8.374185] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: s3203, fw id: 1567123
[    8.392428] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[    8.392432] uvcvideo 1-1.5:1.0: Entity type for entity Extension 3 was not initialized!
[    8.392434] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[    8.392436] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[    8.392540] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input23
[    8.392641] usbcore: registered new interface driver uvcvideo
[    8.392642] USB Video Class driver (1.1.1)
[    8.437099] input: Synaptics s3203 as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0654:00/0018:06CB:2985.0002/input/input22
[    8.437230] hid-rmi 0018:06CB:2985.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL0654:00 06CB:2985] on i2c-DLL0654:00
[    8.553893] checking generic (b0000000 408000) vs hw (b0000000 10000000)
[    8.553895] fb: switching to inteldrmfb from EFI VGA
[    8.553912] Console: switching to colour dummy device 80x25
[    8.554017] [drm] Replacing VGA console driver
[    8.554959] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.554960] [drm] Driver supports precise vblank timestamp query.
[    8.555335] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.562003] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    8.564266] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.564614] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input24
[    8.564842] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.567168] fbcon: inteldrmfb (fb0) is primary device
[    8.572054] intel_rapl: Found RAPL domain package
[    8.572055] intel_rapl: Found RAPL domain core
[    8.572057] intel_rapl: Found RAPL domain uncore
[    8.572058] intel_rapl: Found RAPL domain dram
[    8.572060] intel_rapl: RAPL package 0 domain package locked by BIOS
[    8.572065] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    8.618329] r8169 0000:07:00.0 enp7s0: renamed from eth0
[    8.631367] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
[    9.692049] Console: switching to colour frame buffer device 170x48
[    9.715963] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.719394] audit: type=1130 audit(1545732702.376:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.764369] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[    9.764443] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26
[    9.765615] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input27
[    9.766417] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input28
[    9.766509] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input29
[    9.890610] Adding 18555900k swap on /dev/sda6.  Priority:-2 extents:1 across:18555900k FS
[   10.927119] audit: type=1130 audit(1545732703.583:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-434ad5a1\x2d22b7\x2d491b\x2dae45\x2deb61a59fb64a comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.125800] audit: type=1130 audit(1545732703.783:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-059e08c0\x2ddc51\x2d4189\x2db64e\x2d0170ad080fed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.133778] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   11.286708] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   11.446353] audit: type=1130 audit(1545732704.103:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-DF12\x2d0B47 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.500694] systemd-journald[233]: Received request to flush runtime journal from PID 1
[   11.547678] audit: type=1130 audit(1545732704.206:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.549389] audit: type=1130 audit(1545732704.206:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.644808] audit: type=1130 audit(1545732704.303:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.668893] audit: type=1130 audit(1545732704.326:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@leds:dell::kbd_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.057067] audit: type=1130 audit(1545732704.713:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-0e6ee024\x2d1a57\x2d49d6\x2db874\x2dc542cc069276 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.660990] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   13.273319] audit: type=1130 audit(1545732705.930:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.412118] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02
[   13.412121] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   14.070926] audit: type=1130 audit(1545732706.730:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.024118] kauditd_printk_skb: 7 callbacks suppressed
[   16.024121] audit: type=1130 audit(1545732708.683:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.517938] audit: type=1130 audit(1545732709.176:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.019003] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[   17.067480] Generic PHY r8169-700:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE)
[   17.317709] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[   17.325004] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   17.338413] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   17.360110] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   18.199518] audit: type=1130 audit(1545732710.856:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.577232] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   19.001785] audit: type=1131 audit(1545732711.660:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.384232] audit: type=1130 audit(1545732712.040:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.973025] audit: type=1130 audit(1545732713.630:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.989323] audit: type=1006 audit(1545732713.646:33): pid=467 uid=0 old-auid=4294967295 auid=975 tty=(none) old-ses=4294967295 ses=1 res=1
[   21.296131] audit: type=1130 audit(1545732713.953:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   27.043057] audit: type=1131 audit(1545732719.700:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   27.883902] audit: type=1006 audit(1545732720.540:36): pid=484 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   27.905196] audit: type=1130 audit(1545732720.560:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   27.911070] audit: type=1006 audit(1545732720.570:38): pid=489 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   27.912853] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   27.915921] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   27.937782] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   27.960277] audit: type=1130 audit(1545732720.616:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.016074] audit: type=1130 audit(1545732729.673:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   38.285881] audit: type=1131 audit(1545732730.943:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   38.305521] audit: type=1131 audit(1545732730.963:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.553756] audit: type=1130 audit(1545732734.210:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   43.829842] audit: type=1130 audit(1545732736.486:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.101813] audit: type=1131 audit(1545732738.760:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   59.951542] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   61.248658] wlp6s0: authenticate with dc:72:9b:c1:85:f6
[   61.266652] wlp6s0: send auth to dc:72:9b:c1:85:f6 (try 1/3)
[   61.270305] wlp6s0: authenticated
[   61.270675] wlp6s0: associate with dc:72:9b:c1:85:f6 (try 1/3)
[   61.286589] wlp6s0: RX AssocResp from dc:72:9b:c1:85:f6 (capab=0x431 status=0 aid=1)
[   61.286783] wlp6s0: associated
[   61.324164] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[   61.517932] audit: type=1130 audit(1545732754.176:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   72.009538] audit: type=1131 audit(1545732764.666:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

The problem is because of hardware, I think.

seth · 2018-12-25 15:31:09

Your webcam is wired via usb (it's a bus, not a plug) and there's no strict indication for a directly related failure.
Actually the only device failed to enable is usb 1-1-port8 - how exactly do you determine "All of USB port are not working"? Did you try plugging other devices?

Still lacking lsusb output.

On a sidenote, please see https://wiki.archlinux.org/index.php/Mi … de_updates

duyinthee · 2018-12-26 00:19:32

Yes, all of usb including webcam are not working. That's why I doubt it's not about bad cable as the message says.
I hope there is one thing of glitch on the motherboard which relate to all usb and I can repair it may be.
Sorry about lsusb. here

Bus 001 Device 005: ID 04f3:2020 Elan Microelectronics Corp. 
Bus 001 Device 011: ID 0cf3:0036 Qualcomm Atheros Communications 
Bus 001 Device 010: ID 0c45:6a04 Microdia 
Bus 001 Device 002: ID 8087:8001 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

and lspci is here

00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
        Subsystem: Dell Broadwell-U Host Bridge -OPI
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>
        Kernel driver in use: bdw_uncore

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5500 (rev 09) (prog-if 00 [VGA controller])
        DeviceName:  Onboard IGD
        Subsystem: Dell HD Graphics 5500
        Flags: bus master, fast devsel, latency 0, IRQ 51
        Memory at a9000000 (64-bit, non-prefetchable) [size=16M]
        Memory at b0000000 (64-bit, prefetchable) [size=256M]
        I/O ports at 4000 [size=64]
        [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: i915
        Kernel modules: i915

00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
        Subsystem: Dell Broadwell-U Audio Controller
        Flags: bus master, fast devsel, latency 0, IRQ 58
        Memory at aa214000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) (prog-if 30 [XHCI])
        Subsystem: Dell Wildcat Point-LP USB xHCI Controller
        Flags: bus master, medium devsel, latency 0, IRQ 46
        Memory at aa200000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
        Subsystem: Dell Wildcat Point-LP MEI Controller
        Flags: bus master, fast devsel, latency 0, IRQ 48
        Memory at aa21c000 (64-bit, non-prefetchable) [size=32]
        Capabilities: <access denied>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
        Subsystem: Dell Wildcat Point-LP High Definition Audio Controller
        Flags: bus master, fast devsel, latency 32, IRQ 50
        Memory at aa210000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 42
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 00002000-00002fff [size=4K]
        Memory behind bridge: a8100000-a82fffff [size=2M]
        Prefetchable memory behind bridge: 00000000a8300000-00000000a84fffff [size=2M]
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 43
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: None
        Memory behind bridge: aa100000-aa1fffff [size=1M]
        Prefetchable memory behind bridge: None
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 44
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        I/O behind bridge: 00003000-00003fff [size=4K]
        Memory behind bridge: aa000000-aa0fffff [size=1M]
        Prefetchable memory behind bridge: 00000000c0000000-00000000c00fffff [size=1M]
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 45
        Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
        I/O behind bridge: None
        Memory behind bridge: None
        Prefetchable memory behind bridge: None
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03) (prog-if 20 [EHCI])
        Subsystem: Dell Wildcat Point-LP USB EHCI Controller
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at aa21a000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
        Subsystem: Dell Wildcat Point-LP LPC Controller
        Flags: bus master, medium devsel, latency 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Dell Wildcat Point-LP SATA Controller [AHCI Mode]
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 47
        I/O ports at 40b0 [size=8]
        I/O ports at 40a0 [size=4]
        I/O ports at 4090 [size=8]
        I/O ports at 4080 [size=4]
        I/O ports at 4060 [size=32]
        Memory at aa219000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
        Subsystem: Dell Wildcat Point-LP SMBus Controller
        Flags: medium devsel, IRQ 18
        Memory at aa218000 (64-bit, non-prefetchable) [size=256]
        I/O ports at 4040 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

06:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
        Subsystem: Dell QCA9565 / AR9565 Wireless Network Adapter
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at aa100000 (64-bit, non-prefetchable) [size=512K]
        Expansion ROM at aa180000 [disabled] [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ath9k
        Kernel modules: ath9k

07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 07)
        Subsystem: Dell RTL810xE PCI Express Fast Ethernet controller
        Flags: bus master, fast devsel, latency 0, IRQ 19
        I/O ports at 3000 [size=256]
        Memory at aa000000 (64-bit, non-prefetchable) [size=4K]
        Memory at c0000000 (64-bit, prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: r8169
        Kernel modules: r8169

and kindly have a look at picture of innards of my device.
https://drive.google.com/file/d/19oIT3P … sp=sharing
https://drive.google.com/file/d/1ixkaF- … sp=sharing
https://drive.google.com/file/d/1fNyoj0 … sp=sharing

thanks!

duyinthee · 2018-12-26 00:23:00

USBs are two on the left side and one on the right side.
The right side one is together with SD Card reader which is also not working.

I have already in BIOs, USB is enabled.

seth · 2018-12-26 09:03:22

Looks like https://www.linuxquestions.org/question … 175629121/ so this might be an issue w/ this device, maybe you can find a replacement usb3/reader board on ebay.

duyinthee · 2018-12-30 07:32:41

For testing, I installed Debian 9, one of USB port works but not properly mounted, dmesg says.
Other ports not work but show usb appeared and disappeared in file manager.

[  100.628567] scsi host4: usb-storage 1-1.3:1.0
[  101.808538] scsi 4:0:0:0: Direct-Access     UFD 2.0  Silicon-Power4G  1100 PQ: 0 ANSI: 4
[  101.809754] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  101.810282] sd 4:0:0:0: [sdb] 7727616 512-byte logical blocks: (3.96 GB/3.68 GiB)
[  101.811024] sd 4:0:0:0: [sdb] Write Protect is off
[  101.811033] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  101.811767] sd 4:0:0:0: [sdb] No Caching mode page found
[  101.811776] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  101.820141]  sdb: sdb1
[  101.823238] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[  102.112340] usb 1-1.3: reset high-speed USB device number 18 using ehci-pci
[  103.035640] usb 1-1.3: device descriptor read/64, error -71
[  103.859063] usb 1-1.3: device descriptor read/64, error -71
[  104.046904] usb 1-1.3: reset high-speed USB device number 18 using ehci-pci
[  104.762320] usb 1-1.3: device descriptor read/64, error -71
[  105.672416] usb 1-1.3: USB disconnect, device number 18
[  105.945557] usb 1-1.3: new high-speed USB device number 19 using ehci-pci
[  106.055728] usb 1-1.3: New USB device found, idVendor=090c, idProduct=1000
[  106.055732] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  106.055735] usb 1-1.3: Product: Silicon-Power4G
[  106.055738] usb 1-1.3: Manufacturer: UFD 2.0
[  106.055740] usb 1-1.3: SerialNumber: 201212SP013505030202
[  106.056248] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[  106.056421] scsi host4: usb-storage 1-1.3:1.0
[  106.440426] usb 1-1.3: USB disconnect, device number 19
[  106.665083] usb 1-1.3: new high-speed USB device number 20 using ehci-pci
[  107.168800] usb 1-1.3: device not accepting address 20, error -71
[  107.456994] usb 1-1.3: new high-speed USB device number 21 using ehci-pci
[  107.966100] usb 1-1.3: device descriptor read/64, error -71
[  108.185242] usb 1-1.3: New USB device found, idVendor=090c, idProduct=1000
[  108.185246] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  108.185249] usb 1-1.3: Product: Silicon-Power4G
[  108.185252] usb 1-1.3: Manufacturer: UFD 2.0
[  108.185254] usb 1-1.3: SerialNumber: 201212SP013505030202
[  108.185703] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[  108.185939] scsi host4: usb-storage 1-1.3:1.0
[  108.488614] usb 1-1.3: USB disconnect, device number 21
[  108.711720] usb 1-1.3: new high-speed USB device number 22 using ehci-pci
[  108.822125] usb 1-1.3: New USB device found, idVendor=090c, idProduct=1000
[  108.822128] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  108.822129] usb 1-1.3: Product: Silicon-Power4G
[  108.822130] usb 1-1.3: Manufacturer: UFD 2.0
[  108.822132] usb 1-1.3: SerialNumber: 201212SP013505030202
[  108.822526] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[  108.822656] scsi host4: usb-storage 1-1.3:1.0
[  109.000465] usb 1-1.3: USB disconnect, device number 22
[  109.224724] usb 1-1.3: new high-speed USB device number 23 using ehci-pci
[  109.525317] usb 1-1.3: device descriptor read/64, error -71
[  109.743889] usb 1-1.3: New USB device found, idVendor=090c, idProduct=1000
[  109.743892] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  109.743894] usb 1-1.3: Product: Silicon-Power4G
[  109.743895] usb 1-1.3: Manufacturer: UFD 2.0
[  109.743896] usb 1-1.3: SerialNumber: 201212SP013505030202
[  109.744275] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[  109.744378] scsi host4: usb-storage 1-1.3:1.0
[  110.536500] usb 1-1.3: USB disconnect, device number 23
[  110.759624] usb 1-1.3: new high-speed USB device number 24 using ehci-pci
[  111.060159] usb 1-1.3: device descriptor read/64, error -71
[  111.889652] usb 1-1.3: device descriptor read/64, error -71
[  112.077892] usb 1-1.3: new high-speed USB device number 25 using ehci-pci
[  112.188667] usb 1-1.3: New USB device found, idVendor=090c, idProduct=1000
[  112.188669] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  112.188671] usb 1-1.3: Product: Silicon-Power4G
[  112.188672] usb 1-1.3: Manufacturer: UFD 2.0
[  112.188674] usb 1-1.3: SerialNumber: 201212SP013505030202
[  112.188938] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[  112.189072] scsi host4: usb-storage 1-1.3:1.0
[  112.840699] usb 1-1.3: USB disconnect, device number 25
[  113.063459] usb 1-1.3: new high-speed USB device number 26 using ehci-pci
[  113.363922] usb 1-1.3: device descriptor read/64, error -71
[  113.980836] usb 1-1.3: device descriptor read/64, error -71
[  114.377438] usb 1-1.3: new high-speed USB device number 27 using ehci-pci
[  114.488079] usb 1-1.3: New USB device found, idVendor=090c, idProduct=1000
[  114.488082] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  114.488084] usb 1-1.3: Product: Silicon-Power4G
[  114.488085] usb 1-1.3: Manufacturer: UFD 2.0
[  114.488087] usb 1-1.3: SerialNumber: 201212SP013505030202
[  114.488482] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[  114.488659] scsi host4: usb-storage 1-1.3:1.0
[  114.888723] usb 1-1.3: USB disconnect, device number 27
[  115.110419] usb 1-1.3: new high-speed USB device number 28 using ehci-pci
[  115.221087] usb 1-1.3: New USB device found, idVendor=090c, idProduct=1000
[  115.221090] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  115.221092] usb 1-1.3: Product: Silicon-Power4G
[  115.221093] usb 1-1.3: Manufacturer: UFD 2.0
[  115.221094] usb 1-1.3: SerialNumber: 201212SP013505030202
[  115.221491] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[  115.221699] scsi host4: usb-storage 1-1.3:1.0
[  116.412204] scsi 4:0:0:0: Direct-Access     UFD 2.0  Silicon-Power4G  1100 PQ: 0 ANSI: 4
[  116.413569] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  116.414010] sd 4:0:0:0: [sdb] 7727616 512-byte logical blocks: (3.96 GB/3.68 GiB)
[  116.414744] sd 4:0:0:0: [sdb] Write Protect is off
[  116.414753] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  116.415490] sd 4:0:0:0: [sdb] No Caching mode page found
[  116.415499] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  116.421513]  sdb: sdb1
[  116.424472] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[  116.748431] usb 1-1.3: reset high-speed USB device number 28 using ehci-pci
[  119.555307] usb 1-1.3: device descriptor read/64, error -71
[  119.983753] usb 1-1.3: device descriptor read/64, error -71
[  120.171937] usb 1-1.3: reset high-speed USB device number 28 using ehci-pci
[  121.144795] usb 1-1.3: device descriptor read/64, error -71
[  121.793282] usb 1-1.3: device descriptor read/64, error -71
[  121.981463] usb 1-1.3: reset high-speed USB device number 28 using ehci-pci
[  122.609897] usb 1-1.3: device not accepting address 28, error -71
[  123.522620] usb 1-1.3: reset high-speed USB device number 28 using ehci-pci
[  124.202965] usb 1-1.3: device not accepting address 28, error -71
[  124.203483] usb 1-1.3: USB disconnect, device number 28
[  124.219028] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  124.219031] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 02 00 00 00 f0 00
[  124.219033] blk_update_request: I/O error, dev sdb, sector 512
[  124.219074] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  124.219076] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 02 f0 00 00 10 00
[  124.219077] blk_update_request: I/O error, dev sdb, sector 752
[  124.515224] usb 1-1.3: new high-speed USB device number 29 using ehci-pci
[  125.339770] usb 1-1.3: device descriptor read/64, error -71
[  125.864065] usb 1-1.3: device descriptor read/64, error -71
[  126.052140] usb 1-1.3: new high-speed USB device number 30 using ehci-pci
[  127.224789] usb 1-1.3: device descriptor read/64, error -71
[  128.569425] usb 1-1.3: device descriptor read/64, error -71
[  128.677628] usb 1-1-port3: attempt power cycle
[  129.281651] usb 1-1.3: new high-speed USB device number 31 using ehci-pci
[  129.905978] usb 1-1.3: device not accepting address 31, error -71
[  130.758485] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[  130.758618] usb 1-1-port3: unable to enumerate USB device
[  177.833901] usb 1-1.2: new high-speed USB device number 33 using ehci-pci
[  177.944537] usb 1-1.2: New USB device found, idVendor=090c, idProduct=1000
[  177.944540] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  177.944542] usb 1-1.2: Product: Silicon-Power4G
[  177.944544] usb 1-1.2: Manufacturer: UFD 2.0
[  177.944545] usb 1-1.2: SerialNumber: 201212SP013505030202
[  177.944950] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[  177.945088] scsi host4: usb-storage 1-1.2:1.0
[  179.147149] scsi 4:0:0:0: Direct-Access     UFD 2.0  Silicon-Power4G  1100 PQ: 0 ANSI: 4
[  179.148532] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  179.149078] sd 4:0:0:0: [sdb] 7727616 512-byte logical blocks: (3.96 GB/3.68 GiB)
[  179.149814] sd 4:0:0:0: [sdb] Write Protect is off
[  179.149823] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  179.150605] sd 4:0:0:0: [sdb] No Caching mode page found
[  179.150617] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  179.154836]  sdb: sdb1
[  179.157674] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[  196.091699] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  235.466389] usb 1-1.2: USB disconnect, device number 33
[  246.810058] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[  246.952131] usb 2-1: New USB device found, idVendor=090c, idProduct=1000
[  246.952134] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  246.952136] usb 2-1: Product: Silicon-Power4G
[  246.952137] usb 2-1: Manufacturer: UFD 2.0
[  246.952139] usb 2-1: SerialNumber: 201212SP013505030202
[  246.952623] usb-storage 2-1:1.0: USB Mass Storage device detected
[  246.952765] scsi host4: usb-storage 2-1:1.0
[  248.150647] scsi 4:0:0:0: Direct-Access     UFD 2.0  Silicon-Power4G  1100 PQ: 0 ANSI: 4
[  248.151157] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  248.151325] sd 4:0:0:0: [sdb] 7727616 512-byte logical blocks: (3.96 GB/3.68 GiB)
[  248.151723] sd 4:0:0:0: [sdb] Write Protect is off
[  248.151728] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  248.152150] sd 4:0:0:0: [sdb] No Caching mode page found
[  248.152154] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  248.154534]  sdb: sdb1
[  248.158276] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[  255.859800] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

seth · 2018-12-30 09:56:26

[  255.859800] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Is a filesystem feature, it means after writing access the drive was unplugged (lost power) w/o proper umount.

[  102.112340] usb 1-1.3: reset high-speed USB device number 18 using ehci-pci
[  103.035640] usb 1-1.3: device descriptor read/64, error -71

Is typically a sign of underpower/overdraw (by external HDDs, they need quite some to spin up the disk), but for a USB key it implies a wonky reader connction.

Arch Linux

#1 2018-12-25 03:24:13

Maybe the USB cable is bad?

#2 2018-12-25 09:00:31

Re: Maybe the USB cable is bad?

#3 2018-12-25 10:17:52

Re: Maybe the USB cable is bad?

#4 2018-12-25 15:31:09

Re: Maybe the USB cable is bad?

#5 2018-12-26 00:19:32

Re: Maybe the USB cable is bad?

#6 2018-12-26 00:23:00

Re: Maybe the USB cable is bad?

#7 2018-12-26 09:03:22

Re: Maybe the USB cable is bad?

#8 2018-12-30 07:32:41

Re: Maybe the USB cable is bad?

#9 2018-12-30 09:56:26

Re: Maybe the USB cable is bad?

Board footer