You are not logged in.

#1 2017-06-09 12:30:11

dicaiopolis
Member
Registered: 2010-07-21
Posts: 116

Scanner of Epson Ecotank L395 not working

Hi there,

I installed an Epson Ecotank L395 multifunctional printer. I can print without any troubles, but I can't get the scanner working on Archlinux. I installed "iscan" and "iscan-data". I get the following results on terminal:

 lsusb
Bus 002 Device 004: ID 0fe6:9700 ICS Advent DM9601 Fast Ethernet Adapter
Bus 002 Device 003: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 0458:0088 KYE Systems Corp. (Mouse Systems) 
Bus 001 Device 005: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 001 Device 004: ID 04a9:221f Canon, Inc. CanoScan LiDE 500F
Bus 001 Device 003: ID 04b8:1122 Seiko Epson Corp. 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
$ sudo sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x0fe6, product=0x9700 [USB 2.0 10/100M Ethernet Adaptor]) at libusb:002:004
found USB scanner (vendor=0x0bda [Realtek], product=0x8179 [802.11n NIC]) at libusb:002:003
found USB scanner (vendor=0x04a9 [Canon], product=0x221f [CanoScan]) at libusb:001:004
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x04b8, product=0x1122) at libusb:001:003
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
$ sudo scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

Any ideas on how to make the scanner working properly?
Thanks in advance,
D.

Offline

#2 2017-09-23 18:56:10

TiborB
Member
Registered: 2008-12-09
Posts: 103

Re: Scanner of Epson Ecotank L395 not working

Hi,
I have exactly same problem with printer Epson L386, did you figure it out?

Offline

#3 2018-03-30 14:14:58

dicaiopolis
Member
Registered: 2010-07-21
Posts: 116

Re: Scanner of Epson Ecotank L395 not working

Hi,
Did anybody find a way to make Epson L395 scanner work?

Thanks.

Offline

#4 2019-01-05 13:49:29

diego ferruzzo
Member
Registered: 2019-01-05
Posts: 1

Re: Scanner of Epson Ecotank L395 not working

dicaiopolis wrote:

Hi,
Did anybody find a way to make Epson L395 scanner work?

Thanks.

Hi,
I just installed epson-inkjet-printer-escpr, sane and simple-scan, in that order (I don't know if that matters) and it worked. Now I have both printer and scanner  Epson L395 working.

Hope it helps.

Offline

Board footer

Powered by FluxBB