You are not logged in.

Pages: 1

#1 2019-03-14 21:28:55

azagthoth
Member
From: Germany
Registered: 2019-03-12
Posts: 16

[SOLVED] xrandr not working with multiple monitors

Hello,

I'm running Arch on a laptop.
When I try to switch to an external monitor with 

xrandr --output HDMI1 --primary --mode 2560x1440 --pos 0x0 --output VIRTUAL1 --off --output eDP1 --off

the video output doesn't get displayed correctly (I will try to include screenshots of this).

However when I run this command from my .xinitrc the output gets displayed correctly.

I was using this method to switch monitors a few days ago (I don't remember exactly, probably no more than a week) and it was working fine.
I tested this in different window managers and the result was always the same. Using both monitors at the same time also does not work.

Is this maybe related to the new kernel update? I haven't tried downgrading yet because I'm afraid I might break even more because of incompatibilities.

I have a builtin intel video card, driver is
xf86-video-intel 1:2.99.917+863+g6afed33b-1 (from pacman -Qs output)
Kernel: linux 5.0.1.arch1-1
lspci | grep VGA outputs 

00:02.0 VGA compatible controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Integrated Graphics Controller (rev 0b)

xrandr -q output:

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 290mm x 170mm
   1920x1080     60.05*+  59.93  
   1680x1050     59.88  
   1400x1050     59.98  
   1600x900      60.00    59.95    59.82  
   1280x1024     60.02  
   1400x900      59.96    59.88  
   1280x960      60.00  
   1368x768      60.00    59.88    59.85  
   1280x800      59.81    59.91  
   1280x720      59.86    60.00    59.74  
   1024x768      60.00  
   1024x576      60.00    59.90    59.82  
   960x540       60.00    59.63    59.82  
   800x600       60.32    56.25  
   864x486       60.00    59.92    59.57  
   640x480       59.94  
   720x405       59.51    60.00    58.99  
   640x360       59.84    59.32    60.00  
HDMI1 connected (normal left inverted right x axis y axis)
   2560x1440     59.95 +
   1920x1080     60.00    60.00    50.00    59.94    30.00    25.00    24.00    29.97    23.98  
   1920x1080i    60.00    50.00    59.94  
   1680x1050     59.88  
   1280x1024     75.02    60.02  
   1440x900      59.90  
   1280x960      60.00  
   1280x800      59.91  
   1152x864      75.00  
   1280x720      60.00    50.00    59.94  
   1440x576      50.00  
   1024x768      75.03    70.07    60.00  
   1440x480      60.00    59.94  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    66.67    60.00    59.94  
   720x400       70.08  
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

~/.local/share/xorg/Xorg.0.log

[    14.312] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    14.313] 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[    14.313] Build Operating System: Linux Arch Linux
[    14.313] Current Operating System: Linux arch 5.0.1-arch1-1-ARCH #1 SMP PREEMPT Sun Mar 10 10:55:53 UTC 2019 x86_64
[    14.313] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=72e6bf08-979d-4a3d-9a1c-44d84e5235a3 rw quiet
[    14.313] Build Date: 27 February 2019  04:04:00PM
[    14.313]  
[    14.313] Current version of pixman: 0.38.0
[    14.313] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.313] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.314] (==) Log file: "/home/jonas/.local/share/xorg/Xorg.0.log", Time: Thu Mar 14 23:29:01 2019
[    14.322] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    14.322] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.324] (==) No Layout section.  Using the first Screen section.
[    14.324] (==) No screen section available. Using defaults.
[    14.324] (**) |-->Screen "Default Screen Section" (0)
[    14.324] (**) |   |-->Monitor "<default monitor>"
[    14.325] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    14.325] (**) |   |-->Device "Card0"
[    14.325] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    14.325] (==) Automatically adding devices
[    14.325] (==) Automatically enabling devices
[    14.325] (==) Automatically adding GPU devices
[    14.325] (==) Automatically binding GPU devices
[    14.325] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    14.329] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    14.329] 	Entry deleted from font path.
[    14.330] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[    14.330] 	Entry deleted from font path.
[    14.330] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[    14.330] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[    14.331] 	Entry deleted from font path.
[    14.331] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[    14.331] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF
[    14.331] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.331] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.331] (II) Module ABI versions:
[    14.331] 	X.Org ANSI C Emulation: 0.4
[    14.331] 	X.Org Video Driver: 24.0
[    14.331] 	X.Org XInput driver : 24.1
[    14.331] 	X.Org Server Extension : 10.0
[    14.332] (++) using VT number 2

[    14.335] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    14.336] (II) xfree86: Adding drm device (/dev/dri/card0)
[    14.338] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[    14.342] (--) PCI:*(0@0:2:0) 8086:5a84:1025:1190 rev 11, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x00001000/64, BIOS @ 0x????????/131072
[    14.342] (II) Open ACPI successful (/var/run/acpid.socket)
[    14.342] (II) LoadModule: "glx"
[    14.346] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.362] (II) Module glx: vendor="X.Org Foundation"
[    14.362] 	compiled for 1.20.4, module version = 1.0.0
[    14.362] 	ABI class: X.Org Server Extension, version 10.0
[    14.363] (II) LoadModule: "intel"
[    14.363] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    14.370] (II) Module intel: vendor="X.Org Foundation"
[    14.370] 	compiled for 1.20.4, module version = 2.99.917
[    14.370] 	Module class: X.Org Video Driver
[    14.370] 	ABI class: X.Org Video Driver, version 24.0
[    14.370] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    14.370] (II) intel: Driver for Intel(R) HD Graphics
[    14.370] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    14.370] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    14.370] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    14.372] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20181204
[    14.372] (II) intel(0): SNA compiled from 2.99.917-863-g6afed33b
[    14.389] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    14.390] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 505
[    14.390] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 4 threads
[    14.390] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    14.390] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    14.390] (==) intel(0): RGB weight 888
[    14.390] (==) intel(0): Default visual is TrueColor
[    14.390] (**) intel(0): Option "Backlight" "intel_backlight"
[    14.392] (II) intel(0): Output eDP1 has no monitor section
[    14.393] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    14.393] (II) intel(0): Enabled output eDP1
[    14.393] (II) intel(0): Output HDMI1 has no monitor section
[    14.393] (II) intel(0): Enabled output HDMI1
[    14.393] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    14.393] (II) intel(0): Output VIRTUAL1 has no monitor section
[    14.393] (II) intel(0): Enabled output VIRTUAL1
[    14.393] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    14.393] (==) intel(0): TearFree disabled
[    14.393] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    14.393] (==) intel(0): DPI set to (96, 96)
[    14.393] (II) Loading sub module "dri3"
[    14.393] (II) LoadModule: "dri3"
[    14.394] (II) Module "dri3" already built-in
[    14.394] (II) Loading sub module "dri2"
[    14.394] (II) LoadModule: "dri2"
[    14.394] (II) Module "dri2" already built-in
[    14.394] (II) Loading sub module "present"
[    14.394] (II) LoadModule: "present"
[    14.394] (II) Module "present" already built-in
[    14.399] (II) intel(0): SNA initialized with Broxton (gen9) backend
[    14.399] (==) intel(0): Backing store enabled
[    14.399] (==) intel(0): Silken mouse disabled
[    14.399] (II) intel(0): HW Cursor enabled
[    14.400] (==) intel(0): DPMS enabled
[    14.401] (==) intel(0): Display hotplug detection enabled
[    14.402] (II) intel(0): [DRI2] Setup complete
[    14.402] (II) intel(0): [DRI2]   DRI driver: i965
[    14.402] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    14.402] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    14.402] (II) intel(0): hardware support for Present enabled
[    14.402] (II) Initializing extension Generic Event Extension
[    14.402] (II) Initializing extension SHAPE
[    14.402] (II) Initializing extension MIT-SHM
[    14.402] (II) Initializing extension XInputExtension
[    14.403] (II) Initializing extension XTEST
[    14.403] (II) Initializing extension BIG-REQUESTS
[    14.403] (II) Initializing extension SYNC
[    14.403] (II) Initializing extension XKEYBOARD
[    14.403] (II) Initializing extension XC-MISC
[    14.403] (II) Initializing extension SECURITY
[    14.403] (II) Initializing extension XFIXES
[    14.403] (II) Initializing extension RENDER
[    14.403] (II) Initializing extension RANDR
[    14.403] (II) Initializing extension COMPOSITE
[    14.403] (II) Initializing extension DAMAGE
[    14.403] (II) Initializing extension MIT-SCREEN-SAVER
[    14.403] (II) Initializing extension DOUBLE-BUFFER
[    14.403] (II) Initializing extension RECORD
[    14.403] (II) Initializing extension DPMS
[    14.403] (II) Initializing extension Present
[    14.403] (II) Initializing extension DRI3
[    14.403] (II) Initializing extension X-Resource
[    14.403] (II) Initializing extension XVideo
[    14.403] (II) Initializing extension XVideo-MotionCompensation
[    14.403] (II) Initializing extension GLX
[    14.450] (II) AIGLX: Loaded and initialized i965
[    14.450] (II) GLX: Initialized DRI2 GL provider for screen 0
[    14.450] (II) Initializing extension XFree86-VidModeExtension
[    14.450] (II) Initializing extension XFree86-DGA
[    14.450] (II) Initializing extension XFree86-DRI
[    14.450] (II) Initializing extension DRI2
[    14.458] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    14.473] (II) intel(0): Setting screen physical size to 508 x 285
[    14.552] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    14.552] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    14.552] (II) LoadModule: "libinput"
[    14.552] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    14.560] (II) Module libinput: vendor="X.Org Foundation"
[    14.560] 	compiled for 1.20.3, module version = 0.28.2
[    14.560] 	Module class: X.Org XInput Driver
[    14.560] 	ABI class: X.Org XInput driver, version 24.1
[    14.560] (II) Using input driver 'libinput' for 'Video Bus'
[    14.561] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 17 paused 0
[    14.561] (**) Video Bus: always reports core events
[    14.562] (**) Option "Device" "/dev/input/event7"
[    14.562] (**) Option "_source" "server/udev"
[    14.572] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    14.572] (II) event7  - Video Bus: device is a keyboard
[    14.572] (II) event7  - Video Bus: device removed
[    14.572] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15/event7"
[    14.572] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[    14.574] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    14.574] (II) event7  - Video Bus: device is a keyboard
[    14.575] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    14.575] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    14.575] (II) Using input driver 'libinput' for 'Power Button'
[    14.577] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 0
[    14.577] (**) Power Button: always reports core events
[    14.577] (**) Option "Device" "/dev/input/event2"
[    14.577] (**) Option "_source" "server/udev"
[    14.578] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    14.578] (II) event2  - Power Button: device is a keyboard
[    14.578] (II) event2  - Power Button: device removed
[    14.579] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    14.579] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    14.580] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    14.580] (II) event2  - Power Button: device is a keyboard
[    14.581] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    14.581] (II) No input driver specified, ignoring this device.
[    14.581] (II) This device may have been added with another device file.
[    14.582] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    14.582] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    14.582] (II) Using input driver 'libinput' for 'Sleep Button'
[    14.583] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 21 paused 0
[    14.583] (**) Sleep Button: always reports core events
[    14.584] (**) Option "Device" "/dev/input/event0"
[    14.584] (**) Option "_source" "server/udev"
[    14.585] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    14.585] (II) event0  - Sleep Button: device is a keyboard
[    14.585] (II) event0  - Sleep Button: device removed
[    14.585] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    14.585] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    14.587] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    14.587] (II) event0  - Sleep Button: device is a keyboard
[    14.588] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    14.588] (II) No input driver specified, ignoring this device.
[    14.588] (II) This device may have been added with another device file.
[    14.589] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[    14.589] (II) No input driver specified, ignoring this device.
[    14.589] (II) This device may have been added with another device file.
[    14.589] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    14.589] (II) No input driver specified, ignoring this device.
[    14.589] (II) This device may have been added with another device file.
[    14.590] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[    14.590] (II) No input driver specified, ignoring this device.
[    14.590] (II) This device may have been added with another device file.
[    14.590] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[    14.590] (II) No input driver specified, ignoring this device.
[    14.590] (II) This device may have been added with another device file.
[    14.591] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event14)
[    14.591] (II) No input driver specified, ignoring this device.
[    14.591] (II) This device may have been added with another device file.
[    14.591] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event15)
[    14.591] (II) No input driver specified, ignoring this device.
[    14.591] (II) This device may have been added with another device file.
[    14.592] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event5)
[    14.592] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[    14.592] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[    14.594] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 22 paused 0
[    14.594] (**) HD WebCam: HD WebCam: always reports core events
[    14.594] (**) Option "Device" "/dev/input/event5"
[    14.594] (**) Option "_source" "server/udev"
[    14.596] (II) event5  - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[    14.596] (II) event5  - HD WebCam: HD WebCam: device is a keyboard
[    14.596] (II) event5  - HD WebCam: HD WebCam: device removed
[    14.596] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.0/input/input9/event5"
[    14.596] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 9)
[    14.598] (II) event5  - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[    14.598] (II) event5  - HD WebCam: HD WebCam: device is a keyboard
[    14.599] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    14.599] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    14.599] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    14.600] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 23 paused 0
[    14.600] (**) AT Translated Set 2 keyboard: always reports core events
[    14.600] (**) Option "Device" "/dev/input/event3"
[    14.600] (**) Option "_source" "server/udev"
[    14.602] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    14.602] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    14.603] (II) event3  - AT Translated Set 2 keyboard: device removed
[    14.603] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    14.603] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    14.605] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    14.605] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    14.606] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    14.606] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    14.606] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad"
[    14.606] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    14.607] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 24 paused 0
[    14.607] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    14.607] (**) Option "Device" "/dev/input/event8"
[    14.607] (**) Option "_source" "server/udev"
[    14.609] (II) event8  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    14.610] (II) event8  - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[    14.612] (II) event8  - SynPS/2 Synaptics TouchPad: device is a touchpad
[    14.613] (II) event8  - SynPS/2 Synaptics TouchPad: device removed
[    14.613] (**) Option "Tapping" "on"
[    14.613] (**) Option "TappingButtonMap" "lrm"
[    14.613] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event8"
[    14.613] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    14.615] (**) Option "AccelerationScheme" "none"
[    14.615] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    14.615] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    14.615] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    14.617] (II) event8  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    14.618] (II) event8  - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[    14.620] (II) event8  - SynPS/2 Synaptics TouchPad: device is a touchpad
[    14.621] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    14.621] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad"
[    14.621] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    14.621] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    14.621] (**) Option "Device" "/dev/input/mouse0"
[    14.621] (**) Option "_source" "server/udev"
[    14.621] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse0
	Permission denied.
[    14.621] (II) mouse0: opening input device '/dev/input/mouse0' failed (Permission denied).
[    14.621] (II) mouse0  - failed to create input device '/dev/input/mouse0'.
[    14.621] (EE) libinput: SynPS/2 Synaptics TouchPad: Failed to create a device for /dev/input/mouse0
[    14.621] (EE) PreInit returned 2 for "SynPS/2 Synaptics TouchPad"
[    14.621] (II) UnloadModule: "libinput"
[    14.622] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    14.622] (II) No input driver specified, ignoring this device.
[    14.622] (II) This device may have been added with another device file.
[    14.623] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event6)
[    14.623] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    14.623] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[    14.624] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 25 paused 0
[    14.624] (**) Acer WMI hotkeys: always reports core events
[    14.624] (**) Option "Device" "/dev/input/event6"
[    14.624] (**) Option "_source" "server/udev"
[    14.625] (II) event6  - Acer WMI hotkeys: is tagged by udev as: Keyboard
[    14.625] (II) event6  - Acer WMI hotkeys: device is a keyboard
[    14.625] (II) event6  - Acer WMI hotkeys: device removed
[    14.625] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event6"
[    14.625] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 12)
[    14.626] (II) event6  - Acer WMI hotkeys: is tagged by udev as: Keyboard
[    14.626] (II) event6  - Acer WMI hotkeys: device is a keyboard
[    15.639] (II) intel(0): EDID vendor "AUO", prod id 17453
[    15.639] (II) intel(0): Printing DDC gathered Modelines:
[    15.639] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 -hsync -vsync (67.0 kHz eP)
[    51.599] (II) intel(0): resizing framebuffer to 2560x1440
[    51.615] (II) intel(0): switch to mode 2560x1440@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[    59.215] (II) intel(0): resizing framebuffer to 1920x1080
[    59.216] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    59.466] (EE) intel(0): Failed to set backlight intel_backlight for output eDP1, disabling
[   521.577] (II) intel(0): resizing framebuffer to 2560x1440
[   521.593] (II) intel(0): switch to mode 2560x1440@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[   522.937] (II) intel(0): EDID vendor "ACI", prod id 10147
[   522.937] (II) intel(0): Using hsync ranges from config file
[   522.937] (II) intel(0): Using vrefresh ranges from config file
[   522.937] (II) intel(0): Printing DDC gathered Modelines:
[   522.937] (II) intel(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[   522.937] (II) intel(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   522.937] (II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   522.937] (II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   522.937] (II) intel(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   522.937] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   522.937] (II) intel(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   522.937] (II) intel(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   522.937] (II) intel(0): Modeline "1440x480"x0.0   54.00  1440 1472 1596 1716  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   522.937] (II) intel(0): Modeline "1440x576"x0.0   54.00  1440 1464 1592 1728  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   522.937] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   522.937] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   522.937] (II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   522.938] (II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[   522.938] (II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[   522.938] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   522.938] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   522.938] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   522.938] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   522.938] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   522.938] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   522.938] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   522.938] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   522.938] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   522.938] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   522.938] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   522.938] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   522.938] (II) intel(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   522.938] (II) intel(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   522.938] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   522.938] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   522.938] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[   522.938] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   546.289] (II) intel(0): resizing framebuffer to 1920x1080
[   546.297] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none

laptop screen (works):
laptop-monitor.png
external monitor (broken):
external.png


Edit:
I tried downgrading the kernel to version 4.20 via 

# pacman -U https://archive.archlinux.org/packages/l/linux/linux-4.20.13.arch1-1-x86_64.pkg.tar.xz

but the problem was still there.

I also tried resetting all my packages to the 5.3.2019 by setting 

Server = https://archive.archlinux.org/repos/2019/03/05/$repo/os/$arch

in my /etc/pacman.d/mirrorlist, but this throws an error: 

error: failed to prepare transaction (could not satisfy dependencies)
:: installing xorg-mkfontscale (1.1.3-1) breaks dependency 'xorg-mkfontdir' required by xorg-font-utils

I could only go back to the 8.3.2019 which didn't help.

Are there any other ways I can get my system to an earlier state?
I looked at Downgrading Packages and Arch_Linux_Archive#How_to_downgrade_one_package and thats is all I found.

Last edited by azagthoth (2019-03-15 11:54:16)

Offline

#2 2019-03-14 21:31:55

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [SOLVED] xrandr not working with multiple monitors

Read the Code of Conduct and only post thumbnails http://wiki.archlinux.org/index.php/Cod … s_and_code



Moving to NC...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2019-03-14 21:34:50

azagthoth
Member
From: Germany
Registered: 2019-03-12
Posts: 16

Re: [SOLVED] xrandr not working with multiple monitors

How do I post thumbnails? The code of conduct said I should post links to the images.

Offline

#4 2019-03-14 21:58:13

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [SOLVED] xrandr not working with multiple monitors

Links or thumbs are fine, just not oversized images.

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#5 2019-03-14 22:10:49

azagthoth
Member
From: Germany
Registered: 2019-03-12
Posts: 16

Re: [SOLVED] xrandr not working with multiple monitors

jasonwryan wrote:

Links or thumbs are fine, just not oversized images.

Fixed it, didn't know I could link to the original image with the thumbnail image... I'm sorry big_smile

Could you move this back into Kernel and Hardware? I don't think this Problem belongs in the Newbie Corner (even though I'm new to the forum)

Offline

#6 2019-03-14 22:17:24

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [SOLVED] xrandr not working with multiple monitors

We'll need more information. Card/driver (versions), and xorg.log, etc.

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#7 2019-03-14 22:47:51

azagthoth
Member
From: Germany
Registered: 2019-03-12
Posts: 16

Re: [SOLVED] xrandr not working with multiple monitors

jasonwryan wrote:

We'll need more information. Card/driver (versions), and xorg.log, etc.

I added the xorg log and driver info.
If there's some info I forgot please let me know.

Last edited by azagthoth (2019-03-14 22:55:31)

Offline

#8 2019-03-15 07:55:01

seth
Member
Registered: 2012-09-03
Posts: 51,047

Re: [SOLVED] xrandr not working with multiple monitors

Neither the xrandr -q output nor the Xorg log suggest the command was run before dumping them.
From the problem description (works on xinit) and the screenshot It would seem the xrandr change is actually fine (please dump "xrandr -q" under the "broken" condition) and the problem is w/ either your WM or compositor not catching the geometry change (and thus eg. not updating glViewport() for a GL compositor)

=> in doubt post 

loginctl session-status

(no matter when, I want to see the process list)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#9 2019-03-15 11:53:42

azagthoth
Member
From: Germany
Registered: 2019-03-12
Posts: 16

Re: [SOLVED] xrandr not working with multiple monitors

seth wrote:

Neither the xrandr -q output nor the Xorg log suggest the command was run before dumping them.

I ran the xrandr -q/copied the log after I switched back to the laptop screen because I couldn't read my terminal.

Disabling compton did the trick, thanks for the suggestion!
I had switched to a tryones compton fork for blurred transparency. Now I feel stupid for not thinking about this... Using the official version works.

Thank you!

Offline

Pages: 1

Board footer

Powered by FluxBB