[SOLVED] Strange mouse wheel behavior

theJman · 2019-03-24 17:56:14

Hello there! While I'm not exactly a newbie for Arch (been running it and fixing a variety of problems on my own for a few years now) I thought this would be an appropriate place to make my first Arch forum post.

So for my problem. I've been using herbstluftwm for some time, and because of certain annoyances I decided to explore other window managers. I next tried i3, but quickly realized that my mouse wheel stopped responding properly. It seems to only detect every 5th or so "click" when I spin the wheel, and only if spun very quickly. I thought this was odd, reloaded herbstluftwm, and the problem went away. Naturally I thought a different window manager might work better, so I tried Awesome. Same mouse wheel problem there. Now, when I switched back to herbstluftwm, the mouse wheel problem persisted.

Further info:
I tried adjusting the sensitivity using imwheel, but this only changed the distance the screen scrolls once a wheel click is actually detected.
I uninstalled imwheel, i3, and Awesome.
Using xev I confirmed that the mouse wheel movement isn't being detected properly.
The mouse is a USB mouse, Microsoft Wireless Notebook Optical Mouse 3000.
The mouse behaves when plugged into another machine.

I've tried multiple searches, read wikis, investigated mouse configuration files, to no avail. I've had great luck fixing a bunch of different problems, even taught myself some networking in order to set up my home network. But a stupid little mouse wheel has me stumped lol. Any help or advice is greatly appreciated!

Last edited by theJman (2019-03-26 14:21:01)

bugsmanagement · 2019-03-24 18:12:40

theJman wrote:

Strange mouse wheel behavior

Hey there,

It would be helpful if you explain? Show examples?

Cheers

theJman · 2019-03-24 19:40:21

Sorry if I wasn't descriptive enough. The mouse wheel I have is the type where you can feel distinct "clicks" as you rotate it. For vertically scrolling a page, or zooming in or out while viewing an image, each "click" of the mouse wheel would cause movement (either a scrolling motion or a zoom). That is normal behavior. Mine stopped registering every one of these clicks. Now I must spin it quite quickly in order to register one click. If I keep quickly spinning it in one direction, only about one click per second is actually detected. If I spin it slowly and count, it detecting a click after roughly 15-20 actual clicks, this number is not consistent. I hope this helps.

seth · 2019-03-24 20:31:16

Please post your xorg log and test the behavior in "sudo evtest" and/or "sudo libinput debug-events" .
The non-deterministic behavior is usually a pysical thing (the wheels can loose contact to the switch) - you're sure about the behavior on other HW?
Another thing might be some weird usb autosuspend behavior, do you use TLP or laptop-mode-tools, powertop or similar?

V1del · 2019-03-24 20:34:36

The 5.0 linux kernel contains patches to support high resolution scrolling for certain mice. Maybe that's what you're seeing, FWIW a quick check to see whether that is the cause would be to switch to the LTS kernel and check behavior there.

Though that should rather improve responsiveness on lower ticks, so it might not be that contributing.

Last edited by V1del (2019-03-25 01:55:21)

theJman · 2019-03-25 04:21:37

Okay now I'm really showing my newbieness lol I didn't even think to look at log files. Also, sorry if this output is lengthy and belongs in a pastebin, I am unfamiliar with them and it's getting late, I just want to get to it. Thanks for your patience.

Please post your xorg log

[   121.137] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   121.138] 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[   121.141] Build Operating System: Linux Arch Linux
[   121.143] Current Operating System: Linux funbox 5.0.4-arch1-1-ARCH #1 SMP PREEMPT Sat Mar 23 21:00:33 UTC 2019 x86_64
[   121.144] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cbfa4778-3a2a-460e-a5ea-be7349b442dc rw quiet acpi_backlight=video
[   121.147] Build Date: 27 February 2019  04:04:00PM
[   121.148]  
[   121.148] Current version of pixman: 0.38.0
[   121.151] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[   121.151] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   121.158] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 24 14:05:20 2019
[   121.258] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   121.260] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   121.326] (==) No Layout section.  Using the first Screen section.
[   121.326] (**) |-->Screen "Screen0" (0)
[   121.326] (**) |   |-->Monitor "Monitor0"
[   121.345] (**) |   |-->Device "Card0"
[   121.345] (**) |   |-->GPUDevice "Card0"
[   121.345] (**) |   |-->GPUDevice "Intel Graphics"
[   121.345] (==) Automatically adding devices
[   121.345] (==) Automatically enabling devices
[   121.345] (==) Automatically adding GPU devices
[   121.345] (==) Automatically binding GPU devices
[   121.345] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   121.407] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   121.407] 	Entry deleted from font path.
[   121.475] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   121.476] 	Entry deleted from font path.
[   121.476] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   121.476] 	Entry deleted from font path.
[   121.476] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   121.476] 	Entry deleted from font path.
[   121.476] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   121.476] 	Entry deleted from font path.
[   121.476] (==) FontPath set to:
	/usr/share/fonts/TTF
[   121.476] (==) ModulePath set to "/usr/lib/xorg/modules"
[   121.476] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   121.476] (II) Module ABI versions:
[   121.476] 	X.Org ANSI C Emulation: 0.4
[   121.476] 	X.Org Video Driver: 24.0
[   121.476] 	X.Org XInput driver : 24.1
[   121.476] 	X.Org Server Extension : 10.0
[   121.477] (++) using VT number 1

[   121.482] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   121.483] (II) xfree86: Adding drm device (/dev/dri/card0)
[   121.484] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[   121.493] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[   121.493] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[   121.500] (--) PCI:*(1@0:0:0) 10de:0a3c:17aa:2145 rev 162, Mem @ 0xcc000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/131072
[   121.500] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   121.500] (II) LoadModule: "glx"
[   121.560] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[   122.417] (II) Module glx: vendor="NVIDIA Corporation"
[   122.417] 	compiled for 4.0.2, module version = 1.0.0
[   122.417] 	Module class: X.Org Server Extension
[   122.418] (II) NVIDIA GLX Module  340.107  Thu May 24 21:40:32 PDT 2018
[   122.426] (II) LoadModule: "nvidia"
[   122.496] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   122.596] (II) Module nvidia: vendor="NVIDIA Corporation"
[   122.596] 	compiled for 4.0.2, module version = 1.0.0
[   122.596] 	Module class: X.Org Video Driver
[   122.602] (II) LoadModule: "intel"
[   122.611] (WW) Warning, couldn't open module intel
[   122.611] (EE) Failed to load module "intel" (module does not exist, 0)
[   122.611] (II) NVIDIA dlloader X Driver  340.107  Thu May 24 21:18:05 PDT 2018
[   122.611] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   122.619] (II) Loading sub module "fb"
[   122.619] (II) LoadModule: "fb"
[   122.620] (II) Loading /usr/lib/xorg/modules/libfb.so
[   122.636] (II) Module fb: vendor="X.Org Foundation"
[   122.636] 	compiled for 1.20.4, module version = 1.0.0
[   122.636] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   122.636] (WW) Unresolved symbol: fbGetGCPrivateKey
[   122.636] (II) Loading sub module "wfb"
[   122.636] (II) LoadModule: "wfb"
[   122.636] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   122.642] (II) Module wfb: vendor="X.Org Foundation"
[   122.642] 	compiled for 1.20.4, module version = 1.0.0
[   122.642] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   122.642] (II) Loading sub module "ramdac"
[   122.642] (II) LoadModule: "ramdac"
[   122.642] (II) Module "ramdac" already built-in
[   122.665] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   122.665] (==) NVIDIA(0): RGB weight 888
[   122.665] (==) NVIDIA(0): Default visual is TrueColor
[   122.665] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   122.666] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[   122.667] (**) NVIDIA(0): Option "NoLogo" "true"
[   122.667] (**) NVIDIA(0): Option "UBB" "false"
[   122.667] (**) NVIDIA(0): Option "Stereo" "0"
[   122.667] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[   122.685] (**) NVIDIA(0): Unified Back Buffers (UBB) disabled
[   122.685] (**) NVIDIA(0): Stereo disabled by request
[   122.686] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0 { ForceCompositionPipeline = On }"
[   122.686] (**) NVIDIA(0): Option "RegistryDwords" "EnableBrightnessControl=1"
[   122.686] (**) NVIDIA(0): Enabling 2D acceleration
[   123.775] (II) NVIDIA(0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
[   123.775] (II) NVIDIA(0):     3D Vision stereo.
[   123.775] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[   123.778] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
[   123.778] (--) NVIDIA(0): Memory: 1048576 kBytes
[   123.778] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0d
[   123.778] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   123.787] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
[   123.787] (--) NVIDIA(0):     CRT-0
[   123.787] (--) NVIDIA(0):     Lenovo Group Limited (DFP-0) (boot, connected)
[   123.787] (--) NVIDIA(0):     DFP-1
[   123.787] (--) NVIDIA(0):     DFP-2
[   123.787] (--) NVIDIA(0):     DFP-3
[   123.787] (--) NVIDIA(0):     DFP-4
[   123.787] (--) NVIDIA(0):     DFP-5
[   123.787] (--) NVIDIA(0):     DFP-6
[   123.787] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   123.787] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal LVDS
[   123.787] (--) NVIDIA(GPU-0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
[   123.787] (--) NVIDIA(0): DFP-1: Internal TMDS
[   123.787] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   123.787] (--) NVIDIA(0): DFP-2: Internal TMDS
[   123.787] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[   123.787] (--) NVIDIA(0): DFP-3: Internal TMDS
[   123.787] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   123.787] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[   123.787] (--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
[   123.787] (--) NVIDIA(0): DFP-5: Internal DisplayPort
[   123.787] (--) NVIDIA(GPU-0): DFP-5: 480.0 MHz maximum pixel clock
[   123.787] (--) NVIDIA(0): DFP-6: Internal DisplayPort
[   123.787] (--) NVIDIA(GPU-0): DFP-6: 480.0 MHz maximum pixel clock
[   123.787] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   123.787] (**) NVIDIA(0):     device Lenovo Group Limited (DFP-0) (Using EDID
[   123.788] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[   123.789] (II) NVIDIA(0): Validated MetaModes:
[   123.789] (II) NVIDIA(0):     "nvidia-auto-select+0+0{ForceCompositionPipeline=On}"
[   123.789] (II) NVIDIA(0): Virtual screen size determined to be 1600 x 900
[   124.856] (--) NVIDIA(0): DPI set to (116, 120); computed from "UseEdidDpi" X config
[   124.856] (--) NVIDIA(0):     option
[   124.856] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[   124.923] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   124.923] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   124.923] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   124.923] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   124.923] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   124.923] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   124.923] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   124.923] (II) NVIDIA(0):     Config Options in the README.
[   124.930] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceCompositionPipeline=On}"
[   125.280] (==) NVIDIA(0): Disabling shared memory pixmaps
[   125.280] (==) NVIDIA(0): Backing store enabled
[   125.280] (==) NVIDIA(0): Silken mouse disabled
[   125.281] (==) NVIDIA(0): DPMS enabled
[   125.300] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[   125.300] (WW) NVIDIA(0): Option "Enable" is not used
[   125.300] (II) Loading sub module "dri2"
[   125.300] (II) LoadModule: "dri2"
[   125.300] (II) Module "dri2" already built-in
[   125.300] (II) NVIDIA(0): [DRI2] Setup complete
[   125.300] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   125.308] (II) Initializing extension Generic Event Extension
[   125.308] (II) Initializing extension SHAPE
[   125.308] (II) Initializing extension MIT-SHM
[   125.308] (II) Initializing extension XInputExtension
[   125.308] (II) Initializing extension XTEST
[   125.308] (II) Initializing extension BIG-REQUESTS
[   125.308] (II) Initializing extension SYNC
[   125.308] (II) Initializing extension XKEYBOARD
[   125.308] (II) Initializing extension XC-MISC
[   125.308] (II) Initializing extension SECURITY
[   125.308] (II) Initializing extension XFIXES
[   125.308] (II) Initializing extension RENDER
[   125.308] (II) Initializing extension RANDR
[   125.308] (II) Initializing extension COMPOSITE
[   125.308] (II) Initializing extension DAMAGE
[   125.308] (II) Initializing extension MIT-SCREEN-SAVER
[   125.308] (II) Initializing extension DOUBLE-BUFFER
[   125.308] (II) Initializing extension RECORD
[   125.308] (II) Initializing extension DPMS
[   125.308] (II) Initializing extension Present
[   125.308] (II) Initializing extension DRI3
[   125.308] (II) Initializing extension X-Resource
[   125.308] (II) Initializing extension XVideo
[   125.308] (II) Initializing extension XVideo-MotionCompensation
[   125.308] (II) Initializing extension XFree86-VidModeExtension
[   125.308] (II) Initializing extension XFree86-DGA
[   125.308] (II) Initializing extension XFree86-DRI
[   125.308] (II) Initializing extension DRI2
[   125.308] (II) Initializing extension GLX
[   125.308] (II) Initializing extension GLX
[   125.308] (II) Indirect GLX disabled.(II) Initializing extension NV-GLX
[   125.308] (II) Initializing extension NV-CONTROL
[   125.308] (II) Initializing extension XINERAMA
[   125.815] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   125.815] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   125.815] (II) LoadModule: "libinput"
[   125.815] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   125.856] (II) Module libinput: vendor="X.Org Foundation"
[   125.857] 	compiled for 1.20.3, module version = 0.28.2
[   125.857] 	Module class: X.Org XInput Driver
[   125.857] 	ABI class: X.Org XInput driver, version 24.1
[   125.857] (II) Using input driver 'libinput' for 'Power Button'
[   125.859] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 30 paused 0
[   125.859] (**) Power Button: always reports core events
[   125.859] (**) Option "Device" "/dev/input/event2"
[   125.859] (**) Option "_source" "server/udev"
[   126.014] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   126.014] (II) event2  - Power Button: device is a keyboard
[   126.015] (II) event2  - Power Button: device removed
[   126.015] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   126.015] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   126.016] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   126.016] (II) event2  - Power Button: device is a keyboard
[   126.017] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[   126.017] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   126.017] (II) Using input driver 'libinput' for 'Video Bus'
[   126.019] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 33 paused 0
[   126.019] (**) Video Bus: always reports core events
[   126.019] (**) Option "Device" "/dev/input/event3"
[   126.019] (**) Option "_source" "server/udev"
[   126.021] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[   126.021] (II) event3  - Video Bus: device is a keyboard
[   126.021] (II) event3  - Video Bus: device removed
[   126.021] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input3/event3"
[   126.021] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   126.023] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[   126.023] (II) event3  - Video Bus: device is a keyboard
[   126.025] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   126.025] (II) No input driver specified, ignoring this device.
[   126.025] (II) This device may have been added with another device file.
[   126.026] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   126.026] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   126.026] (II) Using input driver 'libinput' for 'Sleep Button'
[   126.028] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 34 paused 0
[   126.028] (**) Sleep Button: always reports core events
[   126.028] (**) Option "Device" "/dev/input/event1"
[   126.028] (**) Option "_source" "server/udev"
[   126.030] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   126.030] (II) event1  - Sleep Button: device is a keyboard
[   126.031] (II) event1  - Sleep Button: device removed
[   126.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[   126.031] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   126.033] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   126.033] (II) event1  - Sleep Button: device is a keyboard
[   126.035] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[   126.035] (II) No input driver specified, ignoring this device.
[   126.035] (II) This device may have been added with another device file.
[   126.036] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[   126.036] (II) No input driver specified, ignoring this device.
[   126.036] (II) This device may have been added with another device file.
[   126.037] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[   126.037] (II) No input driver specified, ignoring this device.
[   126.037] (II) This device may have been added with another device file.
[   126.038] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)
[   126.038] (II) No input driver specified, ignoring this device.
[   126.039] (II) This device may have been added with another device file.
[   126.041] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control (/dev/input/event5)
[   126.041] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   126.041] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[   126.097] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 35 paused 0
[   126.097] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[   126.097] (**) Option "Device" "/dev/input/event5"
[   126.097] (**) Option "_source" "server/udev"
[   126.100] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[   126.100] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[   126.100] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[   126.100] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: needs a virtual subdevice
[   126.100] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0001/input/input6/event5"
[   126.100] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: MOUSE, id 9)
[   126.100] (**) Option "AccelerationScheme" "none"
[   126.100] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) selected scheme none/0
[   126.100] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration factor: 2.000
[   126.100] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration threshold: 4
[   126.103] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[   126.103] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[   126.104] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/event6)
[   126.104] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: Applying InputClass "libinput pointer catchall"
[   126.104] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse'
[   126.106] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 36 paused 0
[   126.106] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: always reports core events
[   126.106] (**) Option "Device" "/dev/input/event6"
[   126.106] (**) Option "_source" "server/udev"
[   126.109] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[   126.109] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[   126.109] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[   126.109] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0001/input/input7/event6"
[   126.109] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse" (type: MOUSE, id 10)
[   126.109] (**) Option "AccelerationScheme" "none"
[   126.110] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) selected scheme none/0
[   126.110] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration factor: 2.000
[   126.110] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration threshold: 4
[   126.114] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[   126.114] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[   126.116] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/mouse0)
[   126.116] (II) No input driver specified, ignoring this device.
[   126.116] (II) This device may have been added with another device file.
[   126.118] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event13)
[   126.118] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[   126.118] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[   126.121] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 37 paused 0
[   126.121] (**) Integrated Camera: Integrated C: always reports core events
[   126.121] (**) Option "Device" "/dev/input/event13"
[   126.121] (**) Option "_source" "server/udev"
[   126.124] (II) event13 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[   126.124] (II) event13 - Integrated Camera: Integrated C: device is a keyboard
[   126.124] (II) event13 - Integrated Camera: Integrated C: device removed
[   126.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input17/event13"
[   126.124] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 11)
[   126.127] (II) event13 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[   126.127] (II) event13 - Integrated Camera: Integrated C: device is a keyboard
[   126.128] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event9)
[   126.128] (II) No input driver specified, ignoring this device.
[   126.128] (II) This device may have been added with another device file.
[   126.129] (II) config/udev: Adding input device HDA Intel MID Dock Mic (/dev/input/event10)
[   126.129] (II) No input driver specified, ignoring this device.
[   126.129] (II) This device may have been added with another device file.
[   126.130] (II) config/udev: Adding input device HDA Intel MID Dock Headphone (/dev/input/event11)
[   126.130] (II) No input driver specified, ignoring this device.
[   126.130] (II) This device may have been added with another device file.
[   126.131] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event12)
[   126.131] (II) No input driver specified, ignoring this device.
[   126.131] (II) This device may have been added with another device file.
[   126.132] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[   126.132] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   126.132] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   126.134] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 38 paused 0
[   126.134] (**) AT Translated Set 2 keyboard: always reports core events
[   126.134] (**) Option "Device" "/dev/input/event4"
[   126.134] (**) Option "_source" "server/udev"
[   126.136] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   126.136] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[   126.138] (II) event4  - AT Translated Set 2 keyboard: device removed
[   126.138] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[   126.139] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   126.142] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   126.142] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[   126.145] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event18)
[   126.145] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[   126.145] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[   126.146] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 39 paused 0
[   126.146] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   126.146] (**) Option "Device" "/dev/input/event18"
[   126.146] (**) Option "_source" "server/udev"
[   126.148] (II) event18 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[   126.151] (II) event18 - SynPS/2 Synaptics TouchPad: device is a touchpad
[   126.151] (II) event18 - SynPS/2 Synaptics TouchPad: device removed
[   126.151] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event18"
[   126.151] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[   126.153] (**) Option "AccelerationScheme" "none"
[   126.153] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[   126.153] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   126.153] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   126.155] (II) event18 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[   126.157] (II) event18 - SynPS/2 Synaptics TouchPad: device is a touchpad
[   126.159] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   126.159] (II) No input driver specified, ignoring this device.
[   126.159] (II) This device may have been added with another device file.
[   126.160] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event19)
[   126.160] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[   126.160] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[   126.161] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 40 paused 0
[   126.161] (**) TPPS/2 IBM TrackPoint: always reports core events
[   126.161] (**) Option "Device" "/dev/input/event19"
[   126.161] (**) Option "_source" "server/udev"
[   126.163] (II) event19 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[   126.163] (II) event19 - TPPS/2 IBM TrackPoint: device is a pointer
[   126.165] (II) event19 - TPPS/2 IBM TrackPoint: device removed
[   126.165] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input20/event19"
[   126.165] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[   126.165] (**) Option "AccelerationScheme" "none"
[   126.165] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[   126.165] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[   126.165] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[   126.167] (II) event19 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[   126.167] (II) event19 - TPPS/2 IBM TrackPoint: device is a pointer
[   126.170] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[   126.170] (II) No input driver specified, ignoring this device.
[   126.170] (II) This device may have been added with another device file.
[   126.170] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   126.171] (II) No input driver specified, ignoring this device.
[   126.171] (II) This device may have been added with another device file.
[   126.172] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event8)
[   126.172] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[   126.172] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[   126.173] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 41 paused 0
[   126.173] (**) ThinkPad Extra Buttons: always reports core events
[   126.173] (**) Option "Device" "/dev/input/event8"
[   126.173] (**) Option "_source" "server/udev"
[   126.174] (II) event8  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[   126.174] (II) event8  - ThinkPad Extra Buttons: device is a keyboard
[   126.174] (II) event8  - ThinkPad Extra Buttons: device removed
[   126.174] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event8"
[   126.174] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 15)
[   126.175] (II) event8  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[   126.175] (II) event8  - ThinkPad Extra Buttons: device is a keyboard
[   126.180] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   126.180] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[   126.180] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[   126.180] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[   126.180] (**) Option "Device" "/dev/input/event5"
[   126.180] (**) Option "_source" "_driver/libinput"
[   126.180] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is a virtual subdevice
[   126.180] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0001/input/input6/event5"
[   126.180] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: KEYBOARD, id 16)
[   198.314] (II) Axis 0x1 value 1219 is outside expected range [1237, 4990]
See [url]https://wayland.freedesktop.org/libinput/doc/1.12.6/absolute_coordinate_ranges.html[/url] for details
[   349.666] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control
[   349.667] (**) Option "fd" "35"
[   349.667] (II) UnloadModule: "libinput"
[   349.667] (II) systemd-logind: not releasing fd for 13:69, still in use
[   349.667] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control
[   349.667] (**) Option "fd" "35"
[   349.667] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[   349.668] (II) UnloadModule: "libinput"
[   349.668] (II) systemd-logind: releasing fd for 13:69
[   349.694] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse
[   349.694] (**) Option "fd" "36"
[   349.694] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[   349.695] (II) UnloadModule: "libinput"
[   349.695] (II) systemd-logind: releasing fd for 13:70
[   373.701] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/mouse0)
[   373.701] (II) No input driver specified, ignoring this device.
[   373.701] (II) This device may have been added with another device file.
[   373.803] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/event6)
[   373.803] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: Applying InputClass "libinput pointer catchall"
[   373.803] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse'
[   373.861] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 36 paused 0
[   373.861] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: always reports core events
[   373.861] (**) Option "Device" "/dev/input/event6"
[   373.861] (**) Option "_source" "server/udev"
[   373.865] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[   373.865] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[   373.866] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[   373.866] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.6/0000:0f:00.0/usb2/2-1/2-1:1.0/0003:045E:00E1.0002/input/input22/event6"
[   373.866] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse" (type: MOUSE, id 9)
[   373.867] (**) Option "AccelerationScheme" "none"
[   373.867] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) selected scheme none/0
[   373.867] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration factor: 2.000
[   373.867] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration threshold: 4
[   373.871] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[   373.871] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[   373.874] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control (/dev/input/event5)
[   373.874] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   373.874] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[   373.902] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 61 paused 0
[   373.902] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[   373.902] (**) Option "Device" "/dev/input/event5"
[   373.902] (**) Option "_source" "server/udev"
[   373.906] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[   373.906] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[   373.907] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[   373.907] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: needs a virtual subdevice
[   373.907] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.6/0000:0f:00.0/usb2/2-1/2-1:1.0/0003:045E:00E1.0002/input/input21/event5"
[   373.907] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: MOUSE, id 10)
[   373.908] (**) Option "AccelerationScheme" "none"
[   373.908] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) selected scheme none/0
[   373.908] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration factor: 2.000
[   373.908] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration threshold: 4
[   373.912] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[   373.912] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[   373.913] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   373.913] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[   373.913] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[   373.913] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[   373.913] (**) Option "Device" "/dev/input/event5"
[   373.913] (**) Option "_source" "_driver/libinput"
[   373.913] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is a virtual subdevice
[   373.913] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.6/0000:0f:00.0/usb2/2-1/2-1:1.0/0003:045E:00E1.0002/input/input21/event5"
[   373.914] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: KEYBOARD, id 16)
[  4014.615] (II) Axis 0x1 value 5029 is outside expected range [1237, 4990]
See [url]https://wayland.freedesktop.org/libinput/doc/1.12.6/absolute_coordinate_ranges.html[/url] for details
[  5669.753] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control
[  5669.753] (**) Option "fd" "61"
[  5669.753] (II) UnloadModule: "libinput"
[  5669.754] (II) systemd-logind: not releasing fd for 13:69, still in use
[  5669.754] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control
[  5669.754] (**) Option "fd" "61"
[  5669.754] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[  5669.754] (II) UnloadModule: "libinput"
[  5669.754] (II) systemd-logind: releasing fd for 13:69
[  5669.807] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse
[  5669.807] (**) Option "fd" "36"
[  5669.807] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[  5669.808] (II) UnloadModule: "libinput"
[  5669.808] (II) systemd-logind: releasing fd for 13:70
[  5673.454] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/mouse0)
[  5673.454] (II) No input driver specified, ignoring this device.
[  5673.454] (II) This device may have been added with another device file.
[  5673.567] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/event6)
[  5673.567] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: Applying InputClass "libinput pointer catchall"
[  5673.567] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse'
[  5673.623] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 36 paused 0
[  5673.623] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: always reports core events
[  5673.623] (**) Option "Device" "/dev/input/event6"
[  5673.623] (**) Option "_source" "server/udev"
[  5673.627] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[  5673.627] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[  5673.628] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[  5673.628] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0003/input/input24/event6"
[  5673.628] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse" (type: MOUSE, id 9)
[  5673.628] (**) Option "AccelerationScheme" "none"
[  5673.628] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) selected scheme none/0
[  5673.628] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration factor: 2.000
[  5673.628] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration threshold: 4
[  5673.632] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[  5673.632] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[  5673.634] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control (/dev/input/event5)
[  5673.634] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[  5673.634] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[  5673.674] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 61 paused 0
[  5673.674] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[  5673.674] (**) Option "Device" "/dev/input/event5"
[  5673.674] (**) Option "_source" "server/udev"
[  5673.678] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[  5673.678] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[  5673.679] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[  5673.679] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: needs a virtual subdevice
[  5673.679] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0003/input/input23/event5"
[  5673.679] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: MOUSE, id 10)
[  5673.680] (**) Option "AccelerationScheme" "none"
[  5673.680] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) selected scheme none/0
[  5673.680] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration factor: 2.000
[  5673.680] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration threshold: 4
[  5673.684] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[  5673.684] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[  5673.685] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[  5673.685] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[  5673.686] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[  5673.686] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[  5673.686] (**) Option "Device" "/dev/input/event5"
[  5673.686] (**) Option "_source" "_driver/libinput"
[  5673.686] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is a virtual subdevice
[  5673.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0003/input/input23/event5"
[  5673.686] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: KEYBOARD, id 16)
[  7227.668] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: Enabling spurious button debouncing, see [url]https://wayland.freedesktop.org/libinput/doc/1.12.6/button-debouncing.html[/url] for details
[  7265.088] (II) Axis 0 value 6139 is outside expected range [1251, 6108]
See [url]https://wayland.freedesktop.org/libinput/doc/1.12.6/absolute_coordinate_ranges.html[/url] for details
[ 31226.532] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control
[ 31226.532] (**) Option "fd" "61"
[ 31226.533] (II) UnloadModule: "libinput"
[ 31226.533] (II) systemd-logind: not releasing fd for 13:69, still in use
[ 31226.533] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control
[ 31226.533] (**) Option "fd" "61"
[ 31226.533] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[ 31226.534] (II) UnloadModule: "libinput"
[ 31226.534] (II) systemd-logind: releasing fd for 13:69
[ 31226.554] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse
[ 31226.554] (**) Option "fd" "36"
[ 31226.554] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[ 31226.554] (II) UnloadModule: "libinput"
[ 31226.554] (II) systemd-logind: releasing fd for 13:70
[ 31227.288] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/mouse0)
[ 31227.288] (II) No input driver specified, ignoring this device.
[ 31227.288] (II) This device may have been added with another device file.
[ 31227.397] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control (/dev/input/event5)
[ 31227.397] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 31227.397] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[ 31227.554] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 36 paused 0
[ 31227.554] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[ 31227.554] (**) Option "Device" "/dev/input/event5"
[ 31227.554] (**) Option "_source" "server/udev"
[ 31227.559] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[ 31227.559] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[ 31227.560] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[ 31227.560] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: needs a virtual subdevice
[ 31227.560] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0004/input/input25/event5"
[ 31227.560] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: MOUSE, id 9)
[ 31227.560] (**) Option "AccelerationScheme" "none"
[ 31227.560] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) selected scheme none/0
[ 31227.560] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration factor: 2.000
[ 31227.560] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration threshold: 4
[ 31227.565] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[ 31227.565] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[ 31227.566] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 31227.566] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[ 31227.566] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[ 31227.566] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[ 31227.566] (**) Option "Device" "/dev/input/event5"
[ 31227.566] (**) Option "_source" "_driver/libinput"
[ 31227.566] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is a virtual subdevice
[ 31227.566] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0004/input/input25/event5"
[ 31227.566] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: KEYBOARD, id 10)
[ 31227.569] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/event6)
[ 31227.569] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: Applying InputClass "libinput pointer catchall"
[ 31227.569] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse'
[ 31227.570] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 61 paused 0
[ 31227.570] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: always reports core events
[ 31227.570] (**) Option "Device" "/dev/input/event6"
[ 31227.570] (**) Option "_source" "server/udev"
[ 31227.574] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[ 31227.575] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[ 31227.575] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[ 31227.575] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0004/input/input26/event6"
[ 31227.575] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse" (type: MOUSE, id 16)
[ 31227.576] (**) Option "AccelerationScheme" "none"
[ 31227.576] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) selected scheme none/0
[ 31227.576] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration factor: 2.000
[ 31227.576] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration threshold: 4
[ 31227.579] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[ 31227.579] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[ 31570.598] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control
[ 31570.598] (**) Option "fd" "36"
[ 31570.599] (II) UnloadModule: "libinput"
[ 31570.599] (II) systemd-logind: not releasing fd for 13:69, still in use
[ 31570.599] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control
[ 31570.599] (**) Option "fd" "36"
[ 31570.599] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[ 31570.600] (II) UnloadModule: "libinput"
[ 31570.600] (II) systemd-logind: releasing fd for 13:69
[ 31570.619] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse
[ 31570.619] (**) Option "fd" "61"
[ 31570.619] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[ 31570.620] (II) UnloadModule: "libinput"
[ 31570.620] (II) systemd-logind: releasing fd for 13:70
[ 31570.994] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/mouse0)
[ 31570.995] (II) No input driver specified, ignoring this device.
[ 31570.995] (II) This device may have been added with another device file.
[ 31571.094] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control (/dev/input/event5)
[ 31571.094] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 31571.094] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[ 31571.274] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 36 paused 0
[ 31571.274] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[ 31571.274] (**) Option "Device" "/dev/input/event5"
[ 31571.274] (**) Option "_source" "server/udev"
[ 31571.278] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[ 31571.278] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[ 31571.279] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[ 31571.279] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: needs a virtual subdevice
[ 31571.279] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0005/input/input27/event5"
[ 31571.279] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: MOUSE, id 9)
[ 31571.279] (**) Option "AccelerationScheme" "none"
[ 31571.280] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) selected scheme none/0
[ 31571.280] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration factor: 2.000
[ 31571.280] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration threshold: 4
[ 31571.284] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[ 31571.284] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[ 31571.285] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 31571.285] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[ 31571.285] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[ 31571.285] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[ 31571.285] (**) Option "Device" "/dev/input/event5"
[ 31571.285] (**) Option "_source" "_driver/libinput"
[ 31571.285] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is a virtual subdevice
[ 31571.285] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0005/input/input27/event5"
[ 31571.285] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: KEYBOARD, id 10)
[ 31571.288] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/event6)
[ 31571.288] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: Applying InputClass "libinput pointer catchall"
[ 31571.288] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse'
[ 31571.290] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 61 paused 0
[ 31571.290] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: always reports core events
[ 31571.290] (**) Option "Device" "/dev/input/event6"
[ 31571.290] (**) Option "_source" "server/udev"
[ 31571.293] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[ 31571.293] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[ 31571.294] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[ 31571.294] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00E1.0005/input/input28/event6"
[ 31571.294] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse" (type: MOUSE, id 16)
[ 31571.294] (**) Option "AccelerationScheme" "none"
[ 31571.295] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) selected scheme none/0
[ 31571.295] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration factor: 2.000
[ 31571.295] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration threshold: 4
[ 31571.298] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[ 31571.298] (II) event6  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[ 32030.252] (II) Axis 0 value 6233 is outside expected range [1251, 6108]
See [url]https://wayland.freedesktop.org/libinput/doc/1.12.6/absolute_coordinate_ranges.html[/url] for details

At 7227.668 it appears that libinput is enabling spurious button debouncing. I reconfirmed that it works on another machine, and quite smoothly, I can't detect any button bouncing.

and test the behavior in "sudo evtest" and/or "sudo libinput debug-events"

libinput debug-events confirms that not every click is being detected, and shows the following when one has been detected:
event6 POINTER_AXIS +58.15s vert -15.00* horiz 0.00 (wheel)

Thanks to the log confirming I am using libinput drivers, I also found this information about my mouse by running libinput list-devices:
Device: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control
Kernel: /dev/input/event5
Group: 6
Seat: seat0, default
Capabilities: keyboard pointer
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: disabled
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a

Device: Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse
Kernel: /dev/input/event6
Group: 6
Seat: seat0, default
Capabilities: pointer
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: disabled
Nat.scrolling: disabled
Middle emulation: disabled
Calibration: n/a
Scroll methods: button
Click methods: none
Disable-w-typing: n/a
Accel profiles: flat *adaptive
Rotation: n/a

The non-deterministic behavior is usually a pysical thing (the wheels can loose contact to the switch) - you're sure about the behavior on other HW?
Another thing might be some weird usb autosuspend behavior, do you use TLP or laptop-mode-tools, powertop or similar?

As stated earlier, I reconfirmed that it works well on other hardware, but it is also possible that the wheel is in fact wearing out, it's pretty old. I am unfamiliar with TLP or powertop. Although I haven't ever noticed any autosuspend issues with my usb ports, I have had issues with other power management configuration.

Seth, I appreciate your guidance.

V1del, any contribution is good, so thank you. This is certainly something I will look into later if the above information doesn't help reach a solution.

Last edited by theJman (2019-03-25 17:23:20)

seth · 2019-03-25 07:10:40

Please edit your post and wrap the outputs in "code" tags, see https://bbs.archlinux.org/help.php#bbcode

The libinput test indicates that this is below the userspace, ie. either a kernel module (usbcore/usb-hid - see V1dels link) or actually the hardware (wheel, cable or usb port - if other buttons register for sure it is indeed and very most likely the wheel)

You could try the behavior w/ the lts kernel and/or some live distro to try a different software stack on the same hardware.
Also see whether wheel clicks right after "regular" (left button ;-) clicks register for sure (tricking usb autosuspends)

theJman · 2019-03-26 14:20:33

I tried both lts kernel and a live distro, mouse wheel works as expected. I should probably just use lts until I can afford some hardware upgrades anyway. Thanks so much for your help!

Arch Linux

#1 2019-03-24 17:56:14

[SOLVED] Strange mouse wheel behavior

#2 2019-03-24 18:12:40

Re: [SOLVED] Strange mouse wheel behavior

#3 2019-03-24 19:40:21

Re: [SOLVED] Strange mouse wheel behavior

#4 2019-03-24 20:31:16

Re: [SOLVED] Strange mouse wheel behavior

#5 2019-03-24 20:34:36

Re: [SOLVED] Strange mouse wheel behavior

#6 2019-03-25 04:21:37

Re: [SOLVED] Strange mouse wheel behavior

#7 2019-03-25 07:10:40

Re: [SOLVED] Strange mouse wheel behavior

#8 2019-03-26 14:20:33

Re: [SOLVED] Strange mouse wheel behavior

Board footer