You are not logged in.
Hi all,
I got an Overpowered laptop from walmart with nvidia optimus 1060 GPU. I'm using the regular closed source nvidia driver and the intel driver.
My problem is, when on battery and X is running (JWM) if i suspend the laptop when i press the power button to wake it, it is completely non-responsive, cannot ssh, cannot use magic keys. Sometimes the screen displays sometimes it doesn't, but either way there's nothing that can be done except to hold down the power button for force it off.
If the power is plugged in, when i sleep it wakes fine (most of the time)
Also if i'm on battery and just on the console if i suspend it, it resumes fine. I am running TLP.
Here is dmesg this is before the crash. Not sure what the deal is with the data link layer errors.
[ 0.000000] efi: ACPI 2.0=0x7a40d000 ACPI=0x7a40d000 SMBIOS=0x7a9bf000 SMBIOS 3.0=0x7a9be000 ESRT=0x77e2a018 MEMATTR=0x77ddc018
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: OVERPOWERED OP-LP2/GK5CN6Z, BIOS N.1.05 11/01/2018
[ 0.000000] tsc: Detected 2200.000 MHz processor
[ 0.000693] tsc: Detected 2208.000 MHz TSC
[ 0.000693] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000698] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000716] last_pfn = 0x87e000 max_arch_pfn = 0x400000000
[ 0.000724] MTRR default type: uncachable
[ 0.000726] MTRR fixed ranges enabled:
[ 0.000730] 00000-9FFFF write-back
[ 0.000732] A0000-BFFFF uncachable
[ 0.000734] C0000-FFFFF write-back
[ 0.000736] MTRR variable ranges enabled:
[ 0.000741] 0 base 0080000000 mask 7FF0000000 write-combining
[ 0.000744] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000746] 2 base 007B800000 mask 7FFF800000 uncachable
[ 0.000748] 3 base 007C000000 mask 7FFC000000 uncachable
[ 0.000751] 4 base 0100000000 mask 7F00000000 write-back
[ 0.000753] 5 base 0200000000 mask 7E00000000 write-back
[ 0.000756] 6 base 0400000000 mask 7C00000000 write-back
[ 0.000758] 7 base 0800000000 mask 7F80000000 write-back
[ 0.000759] 8 disabled
[ 0.000761] 9 disabled
[ 0.003764] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.004379] last_pfn = 0x7ac0f max_arch_pfn = 0x400000000
[ 0.036801] esrt: Reserving ESRT space from 0x0000000077e2a018 to 0x0000000077e2a050.
[ 0.036829] check: Scanning 1 areas for low memory corruption
[ 0.036834] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[ 0.036842] Using GB pages for direct mapping
[ 0.036846] BRK [0x20d601000, 0x20d601fff] PGTABLE
[ 0.036851] BRK [0x20d602000, 0x20d602fff] PGTABLE
[ 0.036854] BRK [0x20d603000, 0x20d603fff] PGTABLE
[ 0.036927] BRK [0x20d604000, 0x20d604fff] PGTABLE
[ 0.036932] BRK [0x20d605000, 0x20d605fff] PGTABLE
[ 0.037220] BRK [0x20d606000, 0x20d606fff] PGTABLE
[ 0.037307] BRK [0x20d607000, 0x20d607fff] PGTABLE
[ 0.037392] BRK [0x20d608000, 0x20d608fff] PGTABLE
[ 0.037543] Secure boot could not be determined
[ 0.037546] RAMDISK: [mem 0x37105000-0x37879fff]
[ 0.037559] ACPI: Early table checksum verification disabled
[ 0.037566] ACPI: RSDP 0x000000007A40D000 000024 (v02 ALASKA)
[ 0.037575] ACPI: XSDT 0x000000007A40D0B0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.037589] ACPI: FACP 0x000000007A448D28 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.037603] ACPI: DSDT 0x000000007A40D218 03BB0D (v02 ALASKA A M I 01072009 INTL 20160527)
[ 0.037612] ACPI: FACS 0x000000007A611080 000040
[ 0.037619] ACPI: APIC 0x000000007A448E40 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.037626] ACPI: FPDT 0x000000007A448F38 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.037634] ACPI: FIDT 0x000000007A448F80 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.037641] ACPI: MCFG 0x000000007A449020 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.037649] ACPI: SSDT 0x000000007A449060 000334 (v01 SataRe SataTabl 00001000 INTL 20160527)
[ 0.037657] ACPI: SSDT 0x000000007A449398 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.037665] ACPI: MSDM 0x000000007A44AB70 000055 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.037672] ACPI: SSDT 0x000000007A44ABC8 0031C7 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.037680] ACPI: SSDT 0x000000007A44DD90 001FCD (v02 PegSsd PegSsdt 00001000 INTL 20160527)
[ 0.037687] ACPI: HPET 0x000000007A44FD60 000038 (v01 INTEL A M I 00000002 01000013)
[ 0.037695] ACPI: SSDT 0x000000007A44FD98 000961 (v02 INTEL Ther_Rvp 00001000 INTL 20160527)
[ 0.037703] ACPI: SSDT 0x000000007A450700 0028E1 (v02 INTEL xh_cfhd4 00000000 INTL 20160527)
[ 0.037712] ACPI: UEFI 0x000000007A452FE8 000048 (v01 ALASKA A M I 00000002 01000013)
[ 0.037719] ACPI: LPIT 0x000000007A453030 00005C (v01 INTEL A M I 00000002 01000013)
[ 0.037727] ACPI: DBGP 0x000000007A453090 000034 (v01 ALASKA A M I 00000002 01000013)
[ 0.037734] ACPI: DBG2 0x000000007A4530C8 000054 (v00 ALASKA A M I 00000002 01000013)
[ 0.037741] ACPI: SSDT 0x000000007A453120 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527)
[ 0.037748] ACPI: DMAR 0x000000007A4531D0 0000A8 (v01 INTEL EDK2 00000002 01000013)
[ 0.037756] ACPI: BGRT 0x000000007A453278 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.037763] ACPI: TPM2 0x000000007A4532B0 000034 (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.037770] ACPI: SSDT 0x000000007A4532E8 001F76 (v01 OptRef OptTabl 00001000 INTL 20160527)
[ 0.037778] ACPI: WSMT 0x000000007A455260 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.037796] ACPI: Local APIC address 0xfee00000
[ 0.038359] No NUMA configuration found
[ 0.038362] Faking a node at [mem 0x0000000000000000-0x000000087dffffff]
[ 0.038370] NODE_DATA(0) allocated [mem 0x87dffc000-0x87dffffff]
[ 0.038471] Zone ranges:
[ 0.038473] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.038477] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.038479] Normal [mem 0x0000000100000000-0x000000087dffffff]
[ 0.038482] Device empty
[ 0.038484] Movable zone start for each node
[ 0.038486] Early memory node ranges
[ 0.038489] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.038491] node 0: [mem 0x0000000000100000-0x000000007930efff]
[ 0.038493] node 0: [mem 0x000000007ac0e000-0x000000007ac0efff]
[ 0.038495] node 0: [mem 0x0000000100000000-0x000000087dffffff]
[ 0.039697] Zeroed struct page in unavailable ranges: 27986 pages
[ 0.039701] Initmem setup node 0 [mem 0x0000000000001000-0x000000087dffffff]
[ 0.039705] On node 0 totalpages: 8352430
[ 0.039708] DMA zone: 64 pages used for memmap
[ 0.039709] DMA zone: 23 pages reserved
[ 0.039712] DMA zone: 3998 pages, LIFO batch:0
[ 0.041232] DMA32 zone: 7693 pages used for memmap
[ 0.041235] DMA32 zone: 492304 pages, LIFO batch:63
[ 0.077175] Normal zone: 122752 pages used for memmap
[ 0.077177] Normal zone: 7856128 pages, LIFO batch:63
[ 0.571417] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.572478] ACPI: PM-Timer IO Port: 0x1808
[ 0.572483] ACPI: Local APIC address 0xfee00000
[ 0.572500] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.572502] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.572504] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.572506] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.572507] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.572509] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.572511] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.572513] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.572514] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.572516] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.572518] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.572519] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.572588] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.572594] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.572597] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.572600] ACPI: IRQ0 used by override.
[ 0.572603] ACPI: IRQ9 used by override.
[ 0.572609] Using ACPI (MADT) for SMP configuration information
[ 0.572613] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.572627] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.572666] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.572670] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.572674] PM: Registered nosave memory: [mem 0x7930f000-0x7a3f3fff]
[ 0.572676] PM: Registered nosave memory: [mem 0x7a3f4000-0x7a470fff]
[ 0.572678] PM: Registered nosave memory: [mem 0x7a471000-0x7a611fff]
[ 0.572680] PM: Registered nosave memory: [mem 0x7a612000-0x7ab66fff]
[ 0.572681] PM: Registered nosave memory: [mem 0x7ab67000-0x7ac0dfff]
[ 0.572685] PM: Registered nosave memory: [mem 0x7ac0f000-0x7fffffff]
[ 0.572687] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.572688] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.572690] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.572692] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.572693] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.572695] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.572697] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.572698] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.572700] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[ 0.572701] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.572703] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.572705] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.572710] [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.572712] Booting paravirtualized kernel on bare hardware
[ 0.572718] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.903698] random: get_random_bytes called from start_kernel+0x95/0x548 with crng_init=0
[ 0.903713] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:12 nr_node_ids:1
[ 0.904568] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
[ 0.904585] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[ 0.904587] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.904637] Built 1 zonelists, mobility grouping on. Total pages: 8221898
[ 0.904639] Policy zone: Normal
[ 0.904641] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f7e5ebbe-be0c-4758-baca-c4aa149506e2 rw acpi_backlight=video sysrq_always_enabled=1
[ 0.904795] sysrq: sysrq always enabled.
[ 0.915020] Calgary: detecting Calgary via BIOS EBDA area
[ 0.915023] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 1.066856] Memory: 32738348K/33409720K available (12293K kernel code, 1268K rwdata, 3688K rodata, 1536K init, 3936K bss, 671372K reserved, 0K cma-reserved)
[ 1.067283] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 1.067296] Kernel/User page tables isolation: enabled
[ 1.067334] ftrace: allocating 35806 entries in 140 pages
[ 1.109075] rcu: Preemptible hierarchical RCU implementation.
[ 1.109078] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 1.109079] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 1.109081] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[ 1.109083] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 1.109085] Tasks RCU enabled.
[ 1.109087] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 1.109089] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 1.113295] NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
[ 1.113811] rcu: Offload RCU callbacks from CPUs: (none).
[ 1.114117] Console: colour dummy device 80x25
[ 1.114125] printk: console [tty0] enabled
[ 1.114174] ACPI: Core revision 20181003
[ 1.115212] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 1.115294] hpet clockevent registered
[ 1.115383] APIC: Switch to symmetric I/O mode setup
[ 1.115387] DMAR: Host address width 39
[ 1.115391] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 1.115403] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 1.115405] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 1.115413] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 1.115416] DMAR: RMRR base: 0x0000007a74f000 end: 0x0000007a998fff
[ 1.115418] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 1.115423] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 1.115424] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 1.115427] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 1.119064] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 1.119067] x2apic enabled
[ 1.119111] Switched APIC routing to cluster x2apic.
[ 1.129008] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 1.145324] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns
[ 1.145356] Calibrating delay loop (skipped), value calculated using timer frequency.. 4417.00 BogoMIPS (lpj=7360000)
[ 1.145362] pid_max: default: 32768 minimum: 301
[ 1.147119] LSM: Security Framework initializing
[ 1.147123] Yama: becoming mindful.
[ 1.147134] AppArmor: AppArmor disabled by boot time parameter
[ 1.156512] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 1.161178] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 1.161351] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.161500] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.162038] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 1.162040] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 1.162052] mce: CPU supports 12 MCE banks
[ 1.162076] CPU0: Thermal monitoring enabled (TM1)
[ 1.162145] process: using mwait in idle threads
[ 1.162151] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 1.162153] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 1.162156] Spectre V2 : Mitigation: Full generic retpoline
[ 1.162158] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 1.162159] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 1.162176] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 1.162177] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 1.162179] Speculative Store Bypass: Vulnerable
[ 1.162830] Freeing SMP alternatives memory: 28K
[ 1.170117] TSC deadline timer enabled
[ 1.170127] smpboot: CPU0: Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[ 1.188680] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 1.188763] ... version: 4
[ 1.188765] ... bit width: 48
[ 1.188767] ... generic registers: 4
[ 1.188769] ... value mask: 0000ffffffffffff
[ 1.188771] ... max period: 00007fffffffffff
[ 1.188773] ... fixed-purpose events: 3
[ 1.188775] ... event mask: 000000070000000f
[ 1.195337] rcu: Hierarchical SRCU implementation.
[ 1.219419] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 1.225352] smp: Bringing up secondary CPUs ...
[ 1.265360] x86: Booting SMP configuration:
[ 1.265364] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 1.666594] smp: Brought up 1 node, 12 CPUs
[ 1.666594] smpboot: Max logical packages: 1
[ 1.666594] smpboot: Total of 12 processors activated (53013.00 BogoMIPS)
[ 1.670011] devtmpfs: initialized
[ 1.670011] x86/mm: Memory block size: 128MB
[ 1.676368] PM: Registering ACPI NVS region [mem 0x7a471000-0x7a611fff] (1708032 bytes)
[ 1.676368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 1.676368] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 1.676368] pinctrl core: initialized pinctrl subsystem
[ 1.676368] RTC time: 22:02:34, date: 01/31/19
[ 1.676442] NET: Registered protocol family 16
[ 1.676683] audit: initializing netlink subsys (disabled)
[ 1.676699] audit: type=2000 audit(1548972153.559:1): state=initialized audit_enabled=0 res=1
[ 1.676699] cpuidle: using governor ladder
[ 1.682018] cpuidle: using governor menu
[ 1.682058] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.682058] ACPI: bus type PCI registered
[ 1.682058] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.682234] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.682241] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 1.682274] PCI: Using configuration type 1 for base access
[ 1.685462] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 1.685462] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 1.685648] ACPI: Added _OSI(Module Device)
[ 1.685651] ACPI: Added _OSI(Processor Device)
[ 1.685653] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.685656] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.685658] ACPI: Added _OSI(Linux-Dell-Video)
[ 1.685661] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 1.787130] ACPI Error: Field [SAC1] at bit offset/length 64/64 exceeds size of target Buffer (64 bits) (20181003/dsopcode-201)
[ 1.787163] fbcon: Taking over console
[ 1.946510] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 1.951874] ACPI Error: Field [SAC1] at bit offset/length 64/64 exceeds size of target Buffer (64 bits) (20181003/dsopcode-201)
[ 1.951899] ACPI Error: AE_AML_BUFFER_LIMIT, Could not execute arguments for [SAC1] (BufferField) (20181003/nsinit-433)
[ 1.956891] ACPI Error: Field [SAC1] at bit offset/length 64/64 exceeds size of target Buffer (64 bits) (20181003/dsopcode-201)
[ 1.956914] ACPI Error: AE_AML_BUFFER_LIMIT, Could not execute arguments for [SAC1] (BufferField) (20181003/nsinit-433)
[ 1.981042] ACPI: Dynamic OEM Table Load:
[ 1.981059] ACPI: SSDT 0xFFFF9ABD59B24000 0005BE (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 1.983138] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 1.986996] ACPI: Dynamic OEM Table Load:
[ 1.987012] ACPI: SSDT 0xFFFF9ABD59115400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 1.990478] ACPI: Dynamic OEM Table Load:
[ 1.990499] ACPI: SSDT 0xFFFF9ABD5919D000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 1.995377] ACPI: Dynamic OEM Table Load:
[ 1.995391] ACPI: SSDT 0xFFFF9ABD59110C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 2.012697] ACPI: EC: EC started
[ 2.012699] ACPI: EC: interrupt blocked
[ 2.016055] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 2.016061] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x43, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 2.016066] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 2.016068] ACPI: Interpreter enabled
[ 2.016214] ACPI: (supports S0 S3 S4 S5)
[ 2.016216] ACPI: Using IOAPIC for interrupt routing
[ 2.016349] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.018743] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 2.034477] ACPI: Power Resource [PG00] (on)
[ 2.107297] ACPI: Power Resource [USBC] (on)
[ 2.120282] ACPI: Power Resource [V0PR] (on)
[ 2.121041] ACPI: Power Resource [V1PR] (on)
[ 2.121778] ACPI: Power Resource [V2PR] (on)
[ 2.167526] ACPI: Power Resource [WRST] (on)
[ 2.176312] ACPI: Power Resource [PIN] (off)
[ 2.177944] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 2.177963] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 2.185197] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 2.185201] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 2.188099] PCI host bridge to bus 0000:00
[ 2.188106] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 2.188110] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 2.188115] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 2.188119] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 2.188122] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 2.188126] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 2.188130] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 2.188134] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 2.188138] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 2.188141] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 2.188146] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 2.188168] pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000
[ 2.188595] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 2.188717] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.189400] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
[ 2.189431] pci 0000:00:02.0: reg 0x10: [mem 0xa3000000-0xa3ffffff 64bit]
[ 2.189448] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 2.189460] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 2.189507] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 2.190124] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 2.190187] pci 0000:00:12.0: reg 0x10: [mem 0xa5d24000-0xa5d24fff 64bit]
[ 2.190808] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 2.190872] pci 0000:00:14.0: reg 0x10: [mem 0xa5d00000-0xa5d0ffff 64bit]
[ 2.191080] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 2.191717] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 2.191770] pci 0000:00:14.2: reg 0x10: [mem 0xa5d1a000-0xa5d1bfff 64bit]
[ 2.191798] pci 0000:00:14.2: reg 0x18: [mem 0xa5d23000-0xa5d23fff 64bit]
[ 2.192331] pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
[ 2.192512] pci 0000:00:14.3: reg 0x10: [mem 0xa5d14000-0xa5d17fff 64bit]
[ 2.193110] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 2.193913] pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
[ 2.194645] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 2.197537] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 2.197598] pci 0000:00:16.0: reg 0x10: [mem 0xa5d21000-0xa5d21fff 64bit]
[ 2.197775] pci 0000:00:16.0: PME# supported from D3hot
[ 2.198495] pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
[ 2.198550] pci 0000:00:17.0: reg 0x10: [mem 0xa5d18000-0xa5d19fff]
[ 2.198573] pci 0000:00:17.0: reg 0x14: [mem 0xa5d20000-0xa5d200ff]
[ 2.198595] pci 0000:00:17.0: reg 0x18: [io 0x6090-0x6097]
[ 2.198617] pci 0000:00:17.0: reg 0x1c: [io 0x6080-0x6083]
[ 2.198640] pci 0000:00:17.0: reg 0x20: [io 0x6060-0x607f]
[ 2.198661] pci 0000:00:17.0: reg 0x24: [mem 0xa5d1f000-0xa5d1f7ff]
[ 2.198803] pci 0000:00:17.0: PME# supported from D3hot
[ 2.199556] pci 0000:00:1b.0: [8086:a32c] type 01 class 0x060400
[ 2.200098] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.200169] pci 0000:00:1b.0: PTM enabled (root), 4dns granularity
[ 2.200904] pci 0000:00:1d.0: [8086:a335] type 01 class 0x060400
[ 2.201192] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.201253] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[ 2.202201] pci 0000:00:1e.0: [8086:a328] type 00 class 0x078000
[ 2.202933] pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 2.206026] pci 0000:00:1e.3: [8086:a32b] type 00 class 0x0c8000
[ 2.206758] pci 0000:00:1e.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 2.209591] pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
[ 2.210377] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[ 2.210468] pci 0000:00:1f.3: reg 0x10: [mem 0xa5d10000-0xa5d13fff 64bit]
[ 2.210552] pci 0000:00:1f.3: reg 0x20: [mem 0xa5100000-0xa51fffff 64bit]
[ 2.210736] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 2.211673] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 2.211867] pci 0000:00:1f.4: reg 0x10: [mem 0xa5d1c000-0xa5d1c0ff 64bit]
[ 2.212094] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 2.212828] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 2.212870] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 2.213453] pci 0000:01:00.0: [10de:1c20] type 00 class 0x030000
[ 2.213483] pci 0000:01:00.0: reg 0x10: [mem 0xa4000000-0xa4ffffff]
[ 2.213501] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[ 2.213519] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[ 2.213532] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 2.213545] pci 0000:01:00.0: reg 0x30: [mem 0xa5000000-0xa507ffff pref]
[ 2.213970] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.213977] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 2.213983] pci 0000:00:01.0: bridge window [mem 0xa4000000-0xa50fffff]
[ 2.213992] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 2.214440] pci 0000:02:00.0: [126f:2262] type 00 class 0x010802
[ 2.214506] pci 0000:02:00.0: reg 0x10: [mem 0xa5200000-0xa5203fff 64bit]
[ 2.215188] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 2.215198] pci 0000:00:1b.0: bridge window [io 0x4000-0x4fff]
[ 2.215207] pci 0000:00:1b.0: bridge window [mem 0xa5200000-0xa5bfffff]
[ 2.215222] pci 0000:00:1b.0: bridge window [mem 0xa2100000-0xa2afffff 64bit pref]
[ 2.215540] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 2.215597] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 2.215650] pci 0000:03:00.0: reg 0x18: [mem 0xa5c00000-0xa5c00fff 64bit]
[ 2.215686] pci 0000:03:00.0: reg 0x20: [mem 0xa2b00000-0xa2b03fff 64bit pref]
[ 2.215892] pci 0000:03:00.0: supports D1 D2
[ 2.215896] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.216208] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 2.216217] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
[ 2.216226] pci 0000:00:1d.0: bridge window [mem 0xa5c00000-0xa5cfffff]
[ 2.216241] pci 0000:00:1d.0: bridge window [mem 0xa2b00000-0xa2bfffff 64bit pref]
[ 2.222920] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[ 2.223059] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[ 2.223192] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[ 2.223325] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[ 2.223457] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[ 2.223588] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[ 2.223720] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[ 2.223851] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[ 2.228677] ACPI: EC: interrupt unblocked
[ 2.228677] ACPI: EC: event unblocked
[ 2.228677] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x43, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 2.228677] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 2.228682] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 2.228687] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 2.228709] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 2.228714] pci 0000:01:00.0: vgaarb: bridge control possible
[ 2.228717] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 2.228720] vgaarb: loaded
[ 2.232335] ACPI: bus type USB registered
[ 2.232371] usbcore: registered new interface driver usbfs
[ 2.232387] usbcore: registered new interface driver hub
[ 2.232480] usbcore: registered new device driver usb
[ 2.232549] pps_core: LinuxPPS API ver. 1 registered
[ 2.232551] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.232557] PTP clock support registered
[ 2.232576] EDAC MC: Ver: 3.0.0
[ 2.233051] Registered efivars operations
[ 2.258748] PCI: Using ACPI for IRQ routing
[ 2.345039] PCI: pci_cache_line_size set to 64 bytes
[ 2.345672] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 2.345676] e820: reserve RAM buffer [mem 0x7930f000-0x7bffffff]
[ 2.345680] e820: reserve RAM buffer [mem 0x7ac0f000-0x7bffffff]
[ 2.345682] e820: reserve RAM buffer [mem 0x87e000000-0x87fffffff]
[ 2.345905] NetLabel: Initializing
[ 2.345908] NetLabel: domain hash size = 128
[ 2.345909] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 2.345942] NetLabel: unlabeled traffic allowed by default
[ 2.345954] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.345954] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 2.349764] clocksource: Switched to clocksource tsc-early
[ 2.375057] VFS: Disk quotas dquot_6.6.0
[ 2.375103] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.375247] pnp: PnP ACPI init
[ 2.375891] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 2.377427] system 00:01: [io 0x0680-0x069f] has been reserved
[ 2.377433] system 00:01: [io 0x164e-0x164f] has been reserved
[ 2.377445] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.377501] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.377860] system 00:03: [io 0x1854-0x1857] has been reserved
[ 2.377872] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 2.378376] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.378381] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.378385] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.378390] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.378394] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.378399] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 2.378404] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.378409] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 2.378419] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.379313] system 00:05: [io 0x1800-0x18fe] could not be reserved
[ 2.379318] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 2.379323] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 2.379328] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 2.379332] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 2.379337] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 2.379342] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 2.379352] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.380519] system 00:06: [io 0x2000-0x20fe] has been reserved
[ 2.380530] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.384754] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.388406] pnp: PnP ACPI: found 8 devices
[ 2.396568] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 2.396653] pci 0000:00:15.0: BAR 0: assigned [mem 0xa2000000-0xa2000fff 64bit]
[ 2.396937] pci 0000:00:1e.0: BAR 0: assigned [mem 0xa2001000-0xa2001fff 64bit]
[ 2.397217] pci 0000:00:1e.3: BAR 0: assigned [mem 0xa2002000-0xa2002fff 64bit]
[ 2.397492] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.397497] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 2.397505] pci 0000:00:01.0: bridge window [mem 0xa4000000-0xa50fffff]
[ 2.397511] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 2.397521] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 2.397532] pci 0000:00:1b.0: bridge window [io 0x4000-0x4fff]
[ 2.397544] pci 0000:00:1b.0: bridge window [mem 0xa5200000-0xa5bfffff]
[ 2.397554] pci 0000:00:1b.0: bridge window [mem 0xa2100000-0xa2afffff 64bit pref]
[ 2.397569] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 2.397575] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
[ 2.397587] pci 0000:00:1d.0: bridge window [mem 0xa5c00000-0xa5cfffff]
[ 2.397596] pci 0000:00:1d.0: bridge window [mem 0xa2b00000-0xa2bfffff 64bit pref]
[ 2.397613] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 2.397617] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 2.397621] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 2.397625] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
[ 2.397629] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
[ 2.397633] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
[ 2.397637] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
[ 2.397641] pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
[ 2.397645] pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff window]
[ 2.397649] pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window]
[ 2.397653] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 2.397657] pci_bus 0000:01: resource 1 [mem 0xa4000000-0xa50fffff]
[ 2.397661] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[ 2.397666] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 2.397670] pci_bus 0000:02: resource 1 [mem 0xa5200000-0xa5bfffff]
[ 2.397673] pci_bus 0000:02: resource 2 [mem 0xa2100000-0xa2afffff 64bit pref]
[ 2.397677] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 2.397681] pci_bus 0000:03: resource 1 [mem 0xa5c00000-0xa5cfffff]
[ 2.397685] pci_bus 0000:03: resource 2 [mem 0xa2b00000-0xa2bfffff 64bit pref]
[ 2.398260] NET: Registered protocol family 2
[ 2.398615] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[ 2.398903] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.399680] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.399915] TCP: Hash tables configured (established 262144 bind 65536)
[ 2.400027] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 2.400235] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 2.400505] NET: Registered protocol family 1
[ 2.400516] NET: Registered protocol family 44
[ 2.400543] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 2.400906] PCI: CLS 64 bytes, default 64
[ 2.400974] Unpacking initramfs...
[ 2.741267] Freeing initrd memory: 7636K
[ 2.765404] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.765409] software IO TLB: mapped [mem 0x6d838000-0x71838000] (64MB)
[ 2.765486] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns
[ 2.765535] clocksource: Switched to clocksource tsc
[ 2.765961] check: Scanning for low memory corruption every 60 seconds
[ 2.767563] Initialise system trusted keyrings
[ 2.767578] Key type blacklist registered
[ 2.767670] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 2.770942] zbud: loaded
[ 2.854422] Key type asymmetric registered
[ 2.854426] Asymmetric key parser 'x509' registered
[ 2.854447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 2.854560] io scheduler noop registered
[ 2.854563] io scheduler deadline registered
[ 2.854642] io scheduler cfq registered (default)
[ 2.854644] io scheduler mq-deadline registered
[ 2.854647] io scheduler kyber registered
[ 2.854740] io scheduler bfq registered
[ 2.860092] pcieport 0000:00:01.0: Signaling PME with IRQ 122
[ 2.860724] pcieport 0000:00:1b.0: Signaling PME with IRQ 123
[ 2.860915] aer 0000:00:1b.0:pcie002: AER enabled with IRQ 123
[ 2.860972] pciehp 0000:00:1b.0:pcie004: Slot #24 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 2.861178] dpc 0000:00:1b.0:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 2.861900] pcieport 0000:00:1d.0: Signaling PME with IRQ 124
[ 2.862057] aer 0000:00:1d.0:pcie002: AER enabled with IRQ 124
[ 2.862180] dpc 0000:00:1d.0:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 2.862379] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.862573] efifb: probing for efifb
[ 2.862598] efifb: framebuffer at 0x80000000, using 1920k, total 1920k
[ 2.862601] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 2.862603] efifb: scrolling: redraw
[ 2.862607] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.862797] Console: switching to colour frame buffer device 100x37
[ 2.865430] fb0: EFI VGA frame buffer device
[ 2.865451] intel_idle: MWAIT substates: 0x11142120
[ 2.865453] intel_idle: v0.4.1 model 0x9E
[ 2.867110] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.867319] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 2.867337] ACPI: Sleep Button [SLPB]
[ 2.867418] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.867434] ACPI: Power Button [PWRB]
[ 2.867512] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 2.867524] ACPI: Lid Switch [LID1]
[ 2.867604] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.867631] ACPI: Power Button [PWRF]
[ 2.872494] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.872499] ACPI: Thermal Zone [ECTZ] (42 C)
[ 2.874367] ACPI: Invalid active0 threshold
[ 2.876612] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.876617] ACPI: Thermal Zone [TZ00] (42 C)
[ 2.877403] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.883628] nvme nvme0: pci function 0000:02:00.0
[ 2.883713] usbcore: registered new interface driver usbserial_generic
[ 2.883732] usbserial: USB Serial support registered for generic
[ 2.883783] rtc_cmos 00:02: RTC can wake from S4
[ 2.885720] rtc_cmos 00:02: registered as rtc0
[ 2.885756] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.885894] intel_pstate: Intel P-state driver initializing
[ 2.885967] intel_pstate: Disabling energy efficiency optimization
[ 2.887476] intel_pstate: HWP enabled
[ 2.888130] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.888208] intel_pmc_core: initialized
[ 2.888788] NET: Registered protocol family 10
[ 2.903515] Segment Routing with IPv6
[ 2.903564] NET: Registered protocol family 17
[ 2.906089] RAS: Correctable Errors collector initialized.
[ 2.906217] microcode: sig=0x906ea, pf=0x20, revision=0x84
[ 2.906832] microcode: Microcode Update Driver: v2.2.
[ 2.906871] sched_clock: Marking stable (2905531037, 1281836)->(2950647655, -43834782)
[ 2.908322] registered taskstats version 1
[ 2.908338] Loading compiled-in X.509 certificates
[ 2.916501] Loaded X.509 cert 'Build time autogenerated kernel key: e73cd7e741205f5918f34706022a85ba83a3c5e8'
[ 2.916577] zswap: loaded using pool lzo/zbud
[ 2.929924] Key type big_key registered
[ 2.933808] Magic number: 3:595:48
[ 2.933930] memory memory213: hash matches
[ 2.933957] memory memory80: hash matches
[ 2.934302] rtc_cmos 00:02: setting system clock to 2019-01-31 22:02:35 UTC (1548972155)
[ 3.099717] nvme nvme0: missing or invalid SUBNQN field.
[ 3.107661] nvme0n1: p1 p2
[ 3.111074] Freeing unused decrypted memory: 2040K
[ 3.111823] Freeing unused kernel image memory: 1536K
[ 3.138843] Write protecting the kernel read-only data: 18432k
[ 3.140245] Freeing unused kernel image memory: 2016K
[ 3.140661] Freeing unused kernel image memory: 408K
[ 3.167385] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.167388] x86/mm: Checking user space page tables
[ 3.193519] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.193523] Run /init as init process
[ 3.311071] VFIO - User Level meta-driver version: 0.3
[ 3.327436] nvhda: loading out-of-tree module taints kernel.
[ 3.327473] nvhda: module verification failed: signature and/or required key missing - tainting kernel
[ 3.328083] nvhda: version 0.01
[ 3.328100] nvhda: Found nv VGA device 0000:01:00.0
[ 3.328111] nvhda: Succesfully loaded. Audio 0000:01:00.0 is off
[ 3.518903] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.518907] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.523591] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.543752] SCSI subsystem initialized
[ 3.552762] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.552775] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.553994] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810
[ 3.554014] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.554527] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 3.554532] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.554536] usb usb1: Product: xHCI Host Controller
[ 3.554540] usb usb1: Manufacturer: Linux 4.20.5-arch1-1-ARCH xhci-hcd
[ 3.554544] usb usb1: SerialNumber: 0000:00:14.0
[ 3.554877] hub 1-0:1.0: USB hub found
[ 3.554931] hub 1-0:1.0: 16 ports detected
[ 3.560929] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.560938] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.560946] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.561047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[ 3.561051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.561056] usb usb2: Product: xHCI Host Controller
[ 3.561059] usb usb2: Manufacturer: Linux 4.20.5-arch1-1-ARCH xhci-hcd
[ 3.561063] usb usb2: SerialNumber: 0000:00:14.0
[ 3.561323] hub 2-0:1.0: USB hub found
[ 3.561358] hub 2-0:1.0: 8 ports detected
[ 3.570609] libata version 3.00 loaded.
[ 3.580087] ahci 0000:00:17.0: version 3.0
[ 3.580748] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 3.580757] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
[ 3.589531] scsi host0: ahci
[ 3.589858] scsi host1: ahci
[ 3.589996] ata1: SATA max UDMA/133 abar m2048@0xa5d1f000 port 0xa5d1f100 irq 139
[ 3.590002] ata2: SATA max UDMA/133 abar m2048@0xa5d1f000 port 0xa5d1f180 irq 139
[ 3.596575] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.888758] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 3.903175] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.903226] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.906664] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 3.906672] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 3.906678] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 3.906804] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 3.906812] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 3.906818] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 3.907114] ata2.00: ATA-11: SSM28256GPTCB3B-S112612, SBFM61.2, max UDMA/133
[ 3.907120] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.907246] ata1.00: ATA-10: ADATA SU800, Q0922FS, max UDMA/133
[ 3.907252] ata1.00: 2000409264 sectors, multi 2: LBA48 NCQ (depth 32), AA
[ 3.909079] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 3.909086] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 3.909093] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 3.910951] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 3.910958] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 3.910965] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 3.910979] ata2.00: configured for UDMA/133
[ 3.911420] ata1.00: configured for UDMA/133
[ 3.911875] scsi 0:0:0:0: Direct-Access ATA ADATA SU800 2FS PQ: 0 ANSI: 5
[ 3.912683] scsi 1:0:0:0: Direct-Access ATA SSM28256GPTCB3B- 61.2 PQ: 0 ANSI: 5
[ 3.922641] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 3.922675] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.922682] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.922737] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.922859] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
[ 3.922918] sd 0:0:0:0: [sda] Write Protect is off
[ 3.922924] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.923043] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.925912] sda: sda1 sda2
[ 3.925985] sdb: sdb1 sdb2 sdb3 sdb4
[ 3.927366] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.927834] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.007943] random: fast init done
[ 4.032467] usb 1-2: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 4.032474] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.032478] usb 1-2: Product: USB2.0-CRW
[ 4.032482] usb 1-2: Manufacturer: Generic
[ 4.032485] usb 1-2: SerialNumber: 20100201396000000
[ 4.041144] usbcore: registered new interface driver rtsx_usb
[ 4.155409] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 4.202929] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.300303] usb 1-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 4.300310] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.300314] usb 1-4: Product: USB2.0 Hub
[ 4.301608] hub 1-4:1.0: USB hub found
[ 4.301938] hub 1-4:1.0: 4 ports detected
[ 4.346399] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 4.362312] systemd[1]: Detected architecture x86-64.
[ 4.372955] systemd[1]: Set hostname to <overpowered>.
[ 4.428769] usb 1-6: new full-speed USB device number 4 using xhci_hcd
[ 4.450241] systemd[1]: /usr/lib/systemd/system/auditd.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/auditd.pid → /run/auditd.pid; please update the unit file accordingly.
[ 4.537462] systemd[1]: Listening on Journal Audit Socket.
[ 4.538274] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.538711] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.539484] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.543782] systemd[1]: Created slice system-getty.slice.
[ 4.543986] systemd[1]: Reached target Remote File Systems.
[ 4.572481] usb 1-6: New USB device found, idVendor=048d, idProduct=ce00, bcdDevice= 0.03
[ 4.572488] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.572492] usb 1-6: Product: ITE Device(8291)
[ 4.572497] usb 1-6: Manufacturer: ITE Tech. Inc.
[ 4.584189] EXT4-fs (nvme0n1p2): re-mounted. Opts: (null)
[ 4.614482] random: lvm: uninitialized urandom read (4 bytes read)
[ 4.637655] audit: type=1130 audit(1548972157.199:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.637714] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 4.641982] audit: type=1130 audit(1548972157.203:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.645398] usb 1-4.1: new high-speed USB device number 5 using xhci_hcd
[ 4.645920] audit: type=1130 audit(1548972157.209:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.658705] audit: type=1130 audit(1548972157.219:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.722855] audit: type=1130 audit(1548972157.286:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.736749] usb 1-4.1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 4.736757] usb 1-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.736763] usb 1-4.1: Product: USB2.0 Hub
[ 4.738509] hub 1-4.1:1.0: USB hub found
[ 4.738859] hub 1-4.1:1.0: 4 ports detected
[ 4.744279] audit: type=1130 audit(1548972157.306:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.768185] systemd-journald[336]: Received request to flush runtime journal from PID 1
[ 4.772256] systemd-journald[336]: File /var/log/journal/ae7d77608bf943e780c34c12bb91a87d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 4.812124] ACPI: AC Adapter [AC0] (off-line)
[ 4.833146] audit: type=1130 audit(1548972157.396:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.852981] audit: type=1130 audit(1548972157.416:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.862079] usb 1-13: new high-speed USB device number 6 using xhci_hcd
[ 4.871685] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[ 4.925217] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 4.956142] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 4.956240] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 4.961238] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.963109] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.966980] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 4.967007] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.967017] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.967020] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.967023] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 4.967026] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 5.004764] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 5.023528] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.032920] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 5.034379] cryptd: max_cpu_qlen set to 1000
[ 5.039200] i2c_hid i2c-UNIW0001:00: i2c-UNIW0001:00 supply vdd not found, using dummy regulator
[ 5.039242] i2c_hid i2c-UNIW0001:00: Linked as a consumer to regulator.0
[ 5.039250] i2c_hid i2c-UNIW0001:00: i2c-UNIW0001:00 supply vddl not found, using dummy regulator
[ 5.040882] usb 1-13: New USB device found, idVendor=5986, idProduct=1124, bcdDevice=44.07
[ 5.040892] usb 1-13: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.040899] usb 1-13: Product: HD Webcam
[ 5.040905] usb 1-13: Manufacturer: Bison
[ 5.040911] usb 1-13: SerialNumber: 200901010001
[ 5.046529] Linux agpgart interface v0.103
[ 5.071031] IPMI message handler: version 39.2
[ 5.075436] usb 1-4.4: new full-speed USB device number 7 using xhci_hcd
[ 5.090644] AVX2 version of gcm_enc/dec engaged.
[ 5.090648] AES CTR mode by8 optimization enabled
[ 5.092138] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[ 5.092161] ipmi device interface
[ 5.093380] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.095657] intel-lpss 0000:00:1e.3: enabling device (0000 -> 0002)
[ 5.096919] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 5.104894] libphy: r8169: probed
[ 5.105542] r8169 0000:03:00.0 eth0: RTL8168g/8111g, b0:25:aa:2b:ea:19, XID 4c000800, IRQ 142
[ 5.105551] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.166607] usb 1-4.4: New USB device found, idVendor=3842, idProduct=2404, bcdDevice= 0.29
[ 5.166616] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.166623] usb 1-4.4: Product: EVGA TORQ X3L Gaming Mouse
[ 5.166630] usb 1-4.4: Manufacturer: EVGA TORQ X3L
[ 5.175118] audit: type=1130 audit(1548972157.736:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.175373] iTCO_vendor_support: vendor-support=0
[ 5.188648] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.194460] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
[ 5.197363] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 5.224767] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 5.235795] asus_wmi: Asus Management GUID not found
[ 5.238804] usb 1-4.1.1: new full-speed USB device number 8 using xhci_hcd
[ 5.240841] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 5.320663] input: UNIW0001:00 093A:1336 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-UNIW0001:00/0018:093A:1336.0001/input/input6
[ 5.320970] input: UNIW0001:00 093A:1336 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-UNIW0001:00/0018:093A:1336.0001/input/input7
[ 5.321187] hid-generic 0018:093A:1336.0001: input,hidraw0: I2C HID v1.00 Mouse [UNIW0001:00 093A:1336] on i2c-UNIW0001:00
[ 5.337704] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.352104] usbhid 1-6:1.0: couldn't find an input interrupt endpoint
[ 5.359870] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.360488] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.360494] cfg80211: failed to load regulatory.db
[ 5.379884] hid-generic 0003:048D:CE00.0002: hiddev0,hidraw1: USB HID v1.10 Device [ITE Tech. Inc. ITE Device(8291)] on usb-0000:00:14.0-6/input1
[ 5.381023] input: EVGA TORQ X3L EVGA TORQ X3L Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:3842:2404.0003/input/input8
[ 5.392644] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.412852] hid-generic 0003:3842:2404.0003: input,hidraw0: USB HID v1.11 Mouse [EVGA TORQ X3L EVGA TORQ X3L Gaming Mouse] on usb-0000:00:14.0-4.4/input0
[ 5.414713] input: EVGA TORQ X3L EVGA TORQ X3L Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:3842:2404.0004/input/input9
[ 5.414981] input: UNIW0001:00 093A:1336 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-UNIW0001:00/0018:093A:1336.0001/input/input13
[ 5.452681] dw-apb-uart.1: ttyS0 at MMIO 0xa2001000 (irq = 20, base_baud = 7500000) is a 16550A
[ 5.458702] usb 1-14: new full-speed USB device number 9 using xhci_hcd
[ 5.469941] input: EVGA TORQ X3L EVGA TORQ X3L Gaming Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:3842:2404.0004/input/input10
[ 5.470276] input: EVGA TORQ X3L EVGA TORQ X3L Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:3842:2404.0004/input/input11
[ 5.470528] hid-multitouch 0018:093A:1336.0001: input,hidraw2: I2C HID v1.00 Mouse [UNIW0001:00 093A:1336] on i2c-UNIW0001:00
[ 5.470890] hid-generic 0003:3842:2404.0004: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [EVGA TORQ X3L EVGA TORQ X3L Gaming Mouse] on usb-0000:00:14.0-4.4/input1
[ 5.475048] hid-generic 0003:3842:2404.0005: hiddev2,hidraw4: USB HID v1.11 Device [EVGA TORQ X3L EVGA TORQ X3L Gaming Mouse] on usb-0000:00:14.0-4.4/input2
[ 5.475164] usbcore: registered new interface driver usbhid
[ 5.475168] usbhid: USB HID core driver
[ 5.516485] mousedev: PS/2 mouse device common for all mice
[ 5.579755] Intel(R) Wireless WiFi driver for Linux
[ 5.579759] Copyright(c) 2003- 2015 Intel Corporation
[ 5.579914] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ 5.580624] nvhda: enabling audio
[ 5.580667] pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
[ 5.580701] pci 0000:01:00.1: reg 0x10: [mem 0xa5080000-0xa5083fff]
[ 5.592293] nvhda: Audio found, adding
[ 5.592312] pci 0000:01:00.1: BAR 0: assigned [mem 0xa5080000-0xa5083fff]
[ 5.592365] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[ 5.592488] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 5.592754] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.592774] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.594952] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 5.608253] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[ 5.608262] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.619037] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 5.645982] iwlwifi 0000:00:14.3: loaded firmware version 41.fc1a7aea.0 op_mode iwlmvm
[ 5.736711] random: NetworkManager: uninitialized urandom read (16 bytes read)
[ 5.751822] intel_rapl: Found RAPL domain package
[ 5.751828] intel_rapl: Found RAPL domain core
[ 5.751832] intel_rapl: Found RAPL domain uncore
[ 5.751836] intel_rapl: Found RAPL domain dram
[ 5.755889] ahci 0000:00:17.0: port does not support device sleep
[ 5.954291] nvidia: module license 'NVIDIA' taints kernel.
[ 5.954295] Disabling lock debugging due to kernel taint
[ 5.995149] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318
[ 6.014851] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[ 6.015730] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 6.016038] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 6.050307] iwlwifi 0000:00:14.3: base HW address: 34:e1:2d:87:ab:2c
[ 6.102388] checking generic (80000000 1e0000) vs hw (80000000 10000000)
[ 6.102392] fb0: switching to inteldrmfb from EFI VGA
[ 6.102453] Console: switching to colour dummy device 80x25
[ 6.102741] [drm] Replacing VGA console driver
[ 6.106696] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.106699] [drm] Driver supports precise vblank timestamp query.
[ 6.109434] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 6.116640] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 415.27 Thu Dec 20 17:25:03 CST 2018 (using threaded interrupts)
[ 6.123791] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
[ 6.130403] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.133205] acpi device:0f: registered as cooling_device13
[ 6.133504] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 6.133822] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 6.133920] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input16
[ 6.134198] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.134471] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.135044] thermal thermal_zone4: failed to read out thermal zone (-61)
[ 6.136988] fbcon: inteldrmfb (fb0) is primary device
[ 6.142644] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[ 6.150737] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 415.27 Thu Dec 20 17:06:08 CST 2018
[ 6.157325] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 6.157331] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[ 6.187541] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.188228] random: crng init done
[ 6.189829] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 6.283598] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 6.283810] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 6.284002] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 6.321227] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.322118] r8169 0000:03:00.0 enp3s0: Link is Down
[ 6.339254] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 6.547061] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[ 6.548271] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 6.622369] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 6.744279] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 6.771902] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[ 6.773006] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 7.218331] Console: switching to colour frame buffer device 240x67
[ 7.237067] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.244415] kauditd_printk_skb: 16 callbacks suppressed
[ 7.244427] audit: type=1130 audit(1548972159.806:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=tlp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.255935] audit: type=1130 audit(1548972159.819:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.257811] audit: type=1130 audit(1548972159.819:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.293271] audit: type=1130 audit(1548972159.856:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.338130] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.338141] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.338149] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 7.338155] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.338160] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.338168] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 7.338175] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 7.360650] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 7.363072] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 7.363424] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 7.363800] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 7.364117] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 7.364333] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 7.364528] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 7.364751] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 7.386366] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 7.422389] audit: type=1130 audit(1548972159.986:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 9.418788] usb 1-4.1.1: New USB device found, idVendor=1b1c, idProduct=1b20, bcdDevice= 3.08
[ 9.418795] usb 1-4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.418799] usb 1-4.1.1: Product: Corsair STRAFE RGB Gaming Keyboard
[ 9.418803] usb 1-4.1.1: Manufacturer: Corsair
[ 9.418807] usb 1-4.1.1: SerialNumber: 0803A01CAF0E98C15965931FF5001BC5
[ 10.256885] input: Corsair Corsair STRAFE RGB Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/0003:1B1C:1B20.0006/input/input28
[ 10.312817] input: Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/0003:1B1C:1B20.0006/input/input29
[ 10.313106] input: Corsair Corsair STRAFE RGB Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/0003:1B1C:1B20.0006/input/input30
[ 10.313426] input: Corsair Corsair STRAFE RGB Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/0003:1B1C:1B20.0006/input/input31
[ 10.314015] hid-generic 0003:1B1C:1B20.0006: input,hiddev3,hidraw5: USB HID v1.11 Keyboard [Corsair Corsair STRAFE RGB Gaming Keyboard] on usb-0000:00:14.0-4.1.1/input0
[ 10.932852] hid-generic 0003:1B1C:1B20.0007: hiddev4,hidraw6: USB HID v1.11 Device [Corsair Corsair STRAFE RGB Gaming Keyboard] on usb-0000:00:14.0-4.1.1/input1
[ 12.118760] media: Linux media interface: v0.10
[ 12.172695] videodev: Linux video capture interface: v2.00
[ 12.341741] uvcvideo: Found UVC 1.00 device HD Webcam (5986:1124)
[ 12.350234] uvcvideo: Failed to initialize entity for entity 6
[ 12.350238] uvcvideo: Failed to register entities (-22).
[ 12.350414] input: HD Webcam: HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/input/input32
[ 12.350620] usbcore: registered new interface driver uvcvideo
[ 12.350623] USB Video Class driver (1.1.1)
[ 12.436699] audit: type=1006 audit(1548972164.999:32): pid=614 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 12.524802] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 12.554835] audit: type=1130 audit(1548972165.116:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.571856] audit: type=1006 audit(1548972165.133:34): pid=1114 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 12.672050] systemd-journald[336]: File /var/log/journal/ae7d77608bf943e780c34c12bb91a87d/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 12.690434] audit: type=1130 audit(1548972165.253:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.159276] wlo1: authenticate with e4:f4:c6:14:0f:f8
[ 13.166580] wlo1: send auth to e4:f4:c6:14:0f:f8 (try 1/3)
[ 13.208376] wlo1: authenticated
[ 13.212107] wlo1: associate with e4:f4:c6:14:0f:f8 (try 1/3)
[ 13.214385] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 13.214407] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 13.216196] wlo1: RX AssocResp from e4:f4:c6:14:0f:f8 (capab=0x1411 status=0 aid=3)
[ 13.217903] wlo1: associated
[ 13.266496] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 16.049424] audit: type=1131 audit(1548972168.613:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 36.150759] audit: type=1131 audit(1548972188.713:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 110.230107] device-mapper: uevent: version 1.0.3
[ 110.230234] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 116.634391] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20181003/nsarguments-66)
[ 131.753652] audit: type=1130 audit(1548972284.316:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 135.139758] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 135.139783] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 135.139792] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 135.139799] pcieport 0000:00:1d.0: [12] Timeout
[ 141.520854] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 141.520885] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 141.520900] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 141.520911] pcieport 0000:00:1d.0: [12] Timeout
[ 143.560065] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 143.560098] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 143.560113] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 143.560124] pcieport 0000:00:1d.0: [12] Timeout
[ 143.803952] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 143.803980] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 143.803992] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 143.803999] pcieport 0000:00:1d.0: [12] Timeout
[ 146.081334] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 146.081356] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 146.081363] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 146.081367] pcieport 0000:00:1d.0: [12] Timeout
[ 147.412318] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 147.412341] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 147.412348] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 147.412352] pcieport 0000:00:1d.0: [12] Timeout
[ 148.012411] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 148.012432] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 148.012439] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 148.012443] pcieport 0000:00:1d.0: [12] Timeout
[ 148.249282] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 148.249305] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 148.249310] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 148.249314] pcieport 0000:00:1d.0: [12] Timeout
[ 150.149937] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 150.149949] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 150.149956] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 150.149960] pcieport 0000:00:1d.0: [12] Timeout
[ 150.361223] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 150.361244] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 150.361251] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 150.361255] pcieport 0000:00:1d.0: [12] Timeout
[ 150.404194] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 150.404215] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 150.404221] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 150.404225] pcieport 0000:00:1d.0: [12] Timeout
[ 151.460038] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 151.460060] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 151.460068] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 151.460073] pcieport 0000:00:1d.0: [12] Timeout
[ 151.565448] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 151.565469] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 151.565475] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 151.565480] pcieport 0000:00:1d.0: [12] Timeout
[ 152.631886] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 152.631906] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 152.631911] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 152.631914] pcieport 0000:00:1d.0: [12] Timeout
[ 152.715648] pcieport 0000:00:1d.0: AER: Multiple Corrected error received: 0000:00:1d.0
[ 152.715718] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 152.715728] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 152.715736] pcieport 0000:00:1d.0: [12] Timeout
[ 152.773501] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 152.773520] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 152.773530] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 152.773537] pcieport 0000:00:1d.0: [12] Timeout
[ 155.346006] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 155.346032] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 155.346043] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 155.346051] pcieport 0000:00:1d.0: [12] Timeout
[ 177.418327] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 177.418353] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 177.418365] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 177.418372] pcieport 0000:00:1d.0: [12] Timeout
[ 183.060437] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 183.060460] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 183.060471] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 183.060479] pcieport 0000:00:1d.0: [12] Timeout
[ 187.237656] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 187.237679] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 187.237690] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 187.237698] pcieport 0000:00:1d.0: [12] Timeout
[ 229.455374] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 229.455397] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 229.455408] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 229.455416] pcieport 0000:00:1d.0: [12] Timeout
[ 296.678992] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 296.679018] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 296.679029] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 296.679037] pcieport 0000:00:1d.0: [12] Timeout
[ 330.123276] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 330.123300] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 330.123311] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 330.123319] pcieport 0000:00:1d.0: [12] Timeout
[ 364.097357] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 364.097380] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 364.097394] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 364.097403] pcieport 0000:00:1d.0: [12] Timeout
[ 371.085540] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 371.085566] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 371.085577] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 371.085585] pcieport 0000:00:1d.0: [12] Timeout
[ 396.493115] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 396.493141] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 396.493152] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 396.493160] pcieport 0000:00:1d.0: [12] Timeout
[ 452.160139] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 452.160171] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 452.160184] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 452.160195] pcieport 0000:00:1d.0: [12] Timeout
[ 494.745959] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 494.745985] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 494.745996] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 494.746004] pcieport 0000:00:1d.0: [12] Timeout
[ 519.008336] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 519.008362] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 519.008373] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 519.008381] pcieport 0000:00:1d.0: [12] Timeout
[ 590.255686] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:00:1d.0
[ 590.255712] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 590.255724] pcieport 0000:00:1d.0: device [8086:a335] error status/mask=00001000/00002000
[ 590.255732] pcieport 0000:00:1d.0: [12] Timeout Last edited by jmandawg (2019-02-04 22:05:21)
Offline
Ok finally got it fixed. Turned out to be an issue with the touchpad driver. I ended up unloading and reloading it on suspend/resume.
Last edited by jmandawg (2019-02-12 00:15:25)
Offline
Hey,
I have the exact same laptop (from pcspecialist) and I use to have the same issue, it also worked for me to unload/load the touchpad driver.
I've used this script :
https://gist.github.com/mauron85/f764c8 … 7a318dd35b
and in the /etc/suspend-modules.conf file, I've just write "i2c_hid".
Last edited by Matthieu42 (2019-05-12 13:11:35)
Offline