You are not logged in.

#1 2019-05-18 15:01:06

nahush
Member
Registered: 2019-01-18
Posts: 56

[SOLVED]Ardour Crash problem in arch linux?

I have installed pro audio package in arch linux. i use only ardour 5.12 for my music production.Ardour crash likes noting else. if i have more than 10 zenaddsub fx open and if i want to add a another one while looping the ardour crashes . i am unable to find the cause for this


i have tried

1. Changing the governer to performance before starting the ardour
2. Have changed ulimit -l value to unlimited
3. Done almost everything mentioned in pro audio arch wiki (dont have a realtime kernel )

My System configration

  OS: Arch Linux x86_64 
  Host: 20197 Lenovo IdeaPad S300 
  Kernel: 4.19.43-1-lts 
  Packages: 822 (pacman) 
  Shell: bash 5.0.7 
  Resolution: 1366x768 
  DE: openbox 
  Theme: Raleigh [GTK2/3] 
  CPU: Intel i3-2365M (4) @ 1.400GHz 
  GPU: Intel 2nd Generation Core Process 
  Memory: 544MiB / 1823MiB
 

terminal output of ardour

[archmusic@NarchMusic ~]$ ardour5
bind txt domain [gtk2_ardour5] to /usr/share/ardour5/locale
Ardour5.12.0 (built using 5.12 and GCC version 8.2.1 20181127)
ardour: [INFO]: Your system is configured to limit Ardour to only 524288 open files
ardour: [INFO]: Loading system configuration file /etc/ardour5/system_config
ardour: [INFO]: Loading user configuration file /home/archmusic/.config/ardour5/config
ardour: [INFO]: CPU vendor: GenuineIntel
ardour: [INFO]: AVX-capable processor
ardour: [INFO]: CPU brand:        Intel(R) Core(TM) i3-2365M CPU @ 1.40GHz
ardour: [INFO]: Using SSE optimized routines
ardour: [INFO]: Loading default ui configuration file /etc/ardour5/default_ui_config
ardour: [INFO]: Loading user ui configuration file /home/archmusic/.config/ardour5/ui_config
/usr/lib/gio/modules/libdconfsettings.so: file too short
Failed to load module: /usr/lib/gio/modules/libdconfsettings.so
Color shuttle bg not found
ardour: [INFO]: Loading color file /usr/share/ardour5/themes/dark-ardour.colors
ardour: [INFO]: Loading ui configuration file /etc/ardour5/clearlooks.rc
ardour: [INFO]: Loading ui configuration file /etc/ardour5/clearlooks.rc
connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file o>
attempt to connect to server failed
connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file o>
attempt to connect to server failed
connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file o>
attempt to connect to server failed
connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file o>
attempt to connect to server failed
Found nothing along /home/archmusic/.config/ardour5/templates:/usr/share/ardour>
run dialog
connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file o>
attempt to connect to server failed
connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file o>
attempt to connect to server failed
connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file o>
attempt to connect to server failed
JACK command line will be: /usr/bin/jackd -t 200 -p 2048 -R -T -d alsa -n 2 -r >
connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file o>
jackd 0.125.0
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and ot>
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 48000
creating alsa driver ... hw:PCH,0|hw:PCH,0|1024|2|48000|0|0|nomon|swmeter|-|32b>
configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
convolution: samplerate mismatch preset:48000 host:44100
error: /usr/lib/lv2/glBars.lv2/manifest.ttl:29:0: unexpected end of file
ilv_world_load_file(): error: Error loading file `file:///usr/lib/lv2/glBars.lv2/manifest.ttl'
lilv_world_load_bundle(): error: Error reading file:///usr/lib/lv2/glBars.lv2/manifest.ttl
error: /usr/lib/lv2/ProM.lv2/manifest.ttl:29:0: unexpected end of file
lilv_world_load_file(): error: Error loading file `file:///usr/lib/lv2/ProM.lv2/manifest.ttl'
lilv_world_load_bundle(): error: Error reading file:///usr/lib/lv2/ProM.lv2/manifest.ttl
Scanning folders for bundled LV2s: /usr/lib/ardour5/LV2
error: /usr/lib/lv2/glBars.lv2/manifest.ttl:29:0: unexpected end of file
lilv_world_load_file(): error: Error loading file `file:///usr/lib/lv2/glBars.lv2/manifest.ttl'
lilv_world_load_bundle(): error: Error reading file:///usr/lib/lv2/glBars.lv2/manifest.ttl
error: /usr/lib/lv2/ProM.lv2/manifest.ttl:29:0: unexpected end of file
lilv_world_load_file(): error: Error loading file `file:///usr/lib/lv2/ProM.lv2/manifest.ttl'
lilv_world_load_bundle(): error: Error reading file:///usr/lib/lv2/ProM.lv2/manifest.ttl
Set cursor set to default
lo server running on 14728
lo server running on 12939
lo server running on 10873
lo server running on 16510
lo server running on 19015
lo server running on 17754
lo server running on 15543
lo server running on 12971
lo server running on 10489
lo server running on 12084
lo server running on 19777
lo server running on 19520
lo server running on 17288
  GNU nano 4.2                                                     ardour                                                               
lo server running on 10873
lo server running on 16510
lo server running on 19015
lo server running on 17754
lo server running on 15543
lo server running on 12971
lo server running on 10489
lo server running on 12084
lo server running on 19777
lo server running on 19520
lo server running on 17288
lo server running on 12877
WARNING: this host does not send sample-rate information for LV2 UIs, using 44100 as fallback (this could be wrong)
[INFO] Opened the zynaddsubfx UI...
[INFO] Ready to run
actually writing state to /home/archmusic/Ardour/griive/griive.tmp
renaming state to /home/archmusic/Ardour/griive/griive.pending
subgraph starting at ardour timed out (subgraph_wait_fd=12, status = 0, state = Triggered, pollret = 0 revents = 0x0)
pp: cannot clean up byte from graph wait fd - no data present


**** alsa_pcm: xrun of at least 396401.888 msecs


timeout waiting for client ardour to handle a xrun event


**** alsa_pcm: xrun of at least 2000.131 msecs


jack main caught signal 12
no message buffer overruns
Killed

do let me know if any  output is needed.

Last edited by nahush (2019-06-13 09:01:01)

Offline

#2 2019-05-18 16:09:53

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 7,992

Re: [SOLVED]Ardour Crash problem in arch linux?

Check memory consumption? This is a incredibly low end system here, I wouldn't put it past it that you are simply running out of resources when doing that many things at once. FWIW if all of these file errors are any indication you at least have some corrupted files on your system, so you should start with, and post the results of a long SMART disk check

Last edited by V1del (2019-05-18 16:11:00)

Offline

#3 2019-05-19 12:53:13

nahush
Member
Registered: 2019-01-18
Posts: 56

Re: [SOLVED]Ardour Crash problem in arch linux?

here is the out of smartctl

[archmusic@NarchMusic ~]$ sudo smartctl -a /dev/sda | more
[sudo] password for archmusic: 
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.43-1-lts] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Laptop HDD
Device Model:     ST500LT012-9WS142
Serial Number:    W0V0N3RG
LU WWN Device Id: 5 000c50 052d0ac37
Firmware Version: 0001LVM1
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun May 19 18:18:28 2019 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off supp
ort.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 109) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x1031)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_
FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   115   099   034    Pre-fail  Always       -
       85195912
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -
       0
  4 Start_Stop_Count        0x0032   037   037   020    Old_age   Always       -
       65535
  5 Reallocated_Sector_Ct   0x0033   099   099   036    Pre-fail  Always       -
       168
  7 Seek_Error_Rate         0x000f   070   058   030    Pre-fail  Always       -
       301371144797
  9 Power_On_Hours          0x0032   075   075   000    Old_age   Always       -
       22603 (146 144 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -
       0
 12 Power_Cycle_Count       0x0032   095   095   020    Old_age   Always       -
       5773
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -
       0
187 Reported_Uncorrect      0x0032   098   098   000    Old_age   Always       -
       2
188 Command_Timeout         0x0032   100   087   000    Old_age   Always       -
       12885229588
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -
       0
190 Airflow_Temperature_Cel 0x0022   064   049   045    Old_age   Always       -
       36 (Min/Max 33/36)
191 G-Sense_Error_Rate      0x0032   098   098   000    Old_age   Always       -
       5124
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -
       697
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -
       458968
194 Temperature_Celsius     0x0022   036   051   000    Old_age   Always       -
       36 (0 18 0 0 0)
196 Reallocated_Event_Count 0x000f   076   076   030    Pre-fail  Always       -
       21264 (8214 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -
       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -
       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -
       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -
       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA
_of_first_error
# 1  Extended offline    Completed without error       00%     22602         -
# 2  Conveyance offline  Completed without error       00%     22600         -
# 3  Short offline       Completed without error       00%     22597         -
# 4  Short offline       Completed without error       00%     22597         -
# 5  Vendor (0x50)       Aborted by host               90%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
[archmusic@NarchMusic ~]$ sudo smartctl -a /dev/sda | more
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.43-1-lts] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Laptop HDD
Device Model:     ST500LT012-9WS142
Serial Number:    W0V0N3RG
LU WWN Device Id: 5 000c50 052d0ac37
Firmware Version: 0001LVM1
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun May 19 18:19:14 2019 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off supp
ort.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 109) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x1031)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_
FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   115   099   034    Pre-fail  Always       -
       85197960
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -
       0
  4 Start_Stop_Count        0x0032   037   037   020    Old_age   Always       -
       65535
  5 Reallocated_Sector_Ct   0x0033   099   099   036    Pre-fail  Always       -
       168
  7 Seek_Error_Rate         0x000f   070   058   030    Pre-fail  Always       -
       301371144819
  9 Power_On_Hours          0x0032   075   075   000    Old_age   Always       -
       22603 (71 41 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -
       0
 12 Power_Cycle_Count       0x0032   095   095   020    Old_age   Always       -
       5773
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -
       0
187 Reported_Uncorrect      0x0032   098   098   000    Old_age   Always       -
       2
188 Command_Timeout         0x0032   100   087   000    Old_age   Always       -
       12885229588
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -
       0
190 Airflow_Temperature_Cel 0x0022   064   049   045    Old_age   Always       -
       36 (Min/Max 33/36)
191 G-Sense_Error_Rate      0x0032   098   098   000    Old_age   Always       -
       5124
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -
       697
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -
       458969
194 Temperature_Celsius     0x0022   036   051   000    Old_age   Always       -
       36 (0 18 0 0 0)
196 Reallocated_Event_Count 0x000f   076   076   030    Pre-fail  Always       -
       21264 (53950 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -
       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -
       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -
       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -
       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA
_of_first_error
# 1  Extended offline    Completed without error       00%     22602         -
# 2  Conveyance offline  Completed without error       00%     22600         -
# 3  Short offline       Completed without error       00%     22597         -
# 4  Short offline       Completed without error       00%     22597         -
# 5  Vendor (0x50)       Aborted by host               90%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

is this bad or worst?

Last edited by nahush (2019-05-19 14:37:59)

Offline

#4 2019-05-22 08:27:54

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 7,992

Re: [SOLVED]Ardour Crash problem in arch linux?

  1 Raw_Read_Error_Rate     0x000f   115   099   034    Pre-fail  Always       -       85195912
  5 Reallocated_Sector_Ct   0x0033   099   099   036    Pre-fail  Always       -       168
  7 Seek_Error_Rate         0x000f   070   058   030    Pre-fail  Always       -      301371144797

That drive is dying, rescue what you can with ddrescue and replace it.

Offline

#5 2019-06-13 09:00:25

nahush
Member
Registered: 2019-01-18
Posts: 56

Re: [SOLVED]Ardour Crash problem in arch linux?

V1del wrote:
  1 Raw_Read_Error_Rate     0x000f   115   099   034    Pre-fail  Always       -       85195912
  5 Reallocated_Sector_Ct   0x0033   099   099   036    Pre-fail  Always       -       168
  7 Seek_Error_Rate         0x000f   070   058   030    Pre-fail  Always       -      301371144797

That drive is dying, rescue what you can with ddrescue and replace it.


thank you for the advice i will do so . yes you were right about system being using all resources . i have changes the workflow.

Offline

Board footer

Powered by FluxBB