You are not logged in.

Pages: 1

#1 2019-06-14 15:26:02

martex
Member
Registered: 2019-06-14
Posts: 2

Output devices are inverted

I installed Arch Linux but the output devices are inverted. When I plug in my headphones my speakers work and without anything plugged in I get no sound. Without anything connected my pavucontrol says "Analog headphones (plugged in)" and when plugging my headphones in it says "Speakers" and my speakers play sound.

!!!!!!!!!!!!!! Output of "aslactl restore": !!!!!!!!!!!!!!

alsactl: state_lock:125: file /var/lib/alsa/asound.state lock error: File exists
alsactl: load_state:1683: Cannot open /var/lib/alsa/asound.state for reading: File exists
alsactl: sysfs_init:48: sysfs path '/sys' is invalid

Found hardware: "HDA-Intel" "ATI R6xx HDMI" "HDA:1002aa01,00aa0100,00100700" "0x17aa" "0x506f"
Hardware is initialized using a generic method
alsactl: sysfs_init:48: sysfs path '/sys' is invalid

Found hardware: "HDA-Intel" "Conexant CX20753/4" "HDA:14f15111,17aa506f,00100101" "0x17aa" "0x5070"
Hardware is initialized using a generic method

!!!!!!!!!!!!!!! Output of "alsactl init": !!!!!!!!!!!!!

alsactl: sysfs_init:48: sysfs path '/sys' is invalid

Found hardware: "HDA-Intel" "ATI R6xx HDMI" "HDA:1002aa01,00aa0100,00100700" "0x17aa" "0x506f"
Hardware is initialized using a generic method

!!!!!!!!!!!!!! Output of cat /proc/asound/cards !!!!!!!!!!!!!!!!!

0 [Generic        ]: HDA-Intel - HD-Audio Generic
                      HD-Audio Generic at 0xc0888000 irq 63
 1 [Generic_1      ]: HDA-Intel - HD-Audio Generic
                      HD-Audio Generic at 0xc0880000 irq 64

!!!!!!!!!!!!!!! Output of cat /proc/asound/card0/codec* | grep Codec !!!!!!!!!!!!!!!!

Codec: ATI R6xx HDMI

!!!!!!!!!!!!!!!! Output of "pacmd list-cards" !!!!!!!!!!!!!!!!! 

2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_04_00.1>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xc0888000 irq 63"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:04:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "15de"
		device.product.name = "Raven/Raven2/Fenghuang HDMI/DP Audio Controller"
		device.string = "0"
		device.description = "Raven/Raven2/Fenghuang HDMI/DP Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
		off: Uit (priority 0, available: unknown)
	active profile: <off>
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.pci-0000_04_00.6>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xc0880000 irq 64"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:04:00.6"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "15e3"
		device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
		device.string = "1"
		device.description = "Family 17h (Models 10h-1fh) HD Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analoog stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analoog stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Analoog stereo duplex (priority 6565, available: unknown)
		off: Uit (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_04_00.6.analog-stereo/#0: Family 17h (Models 10h-1fh) HD Audio Controller Analoog stereo
	sources:
		alsa_output.pci-0000_04_00.6.analog-stereo.monitor/#0: Monitor of Family 17h (Models 10h-1fh) HD Audio Controller Analoog stereo
		alsa_input.pci-0000_04_00.6.analog-stereo/#1: Family 17h (Models 10h-1fh) HD Audio Controller Analoog stereo
	ports:
		analog-input: Analoge invoer (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Analoge koptelefoon (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"

!!!!!!!!!!!!!!!! Output of pacmd list sinks !!!!!!!!!!!!!!!!!!!

1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_04_00.6.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9039
	volume: front-left: 51118 /  78% / -6,47 dB,   front-right: 51118 /  78% / -6,47 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 39,75 ms
	max request: 6 KiB
	max rewind: 6 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 1
	configured latency: 40,00 ms; range is 0,50 .. 1999,82 ms
	card: 1 <alsa_card.pci-0000_04_00.6>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "CX20753/4 Analog"
		alsa.id = "CX20753/4 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xc0880000 irq 64"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:04:00.6"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "15e3"
		device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
		device.string = "front:1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analoog stereo"
		device.description = "Family 17h (Models 10h-1fh) HD Audio Controller Analoog stereo"
		alsa.mixer_name = "Conexant CX20753/4"
		alsa.components = "HDA:14f15111,17aa506f,00100101"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Analoge koptelefoon (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>

----------------------------------------------------------------------------------------------------------------------------------------------------

I tried adding "options snd-hda-intel power_save=0 power_save_controller=N" to /etc/modprobe.d/sndhda.conf but that didn't work.

I don't really remember doing something else. I got a Lenovo E585 if that helps

Thanks in advance,

Last edited by martex (2019-06-14 18:53:54)

Offline

#2 2019-06-14 15:32:00

2ManyDogs
Forum Fellow
Registered: 2012-01-15
Posts: 4,648

Re: Output devices are inverted

Please edit your post and use [ code ] tags when posting output.

https://wiki.archlinux.org/index.php/Co … s_and_code
https://bbs.archlinux.org/help.php#bbcode

Moving to Newbie Corner.

Offline

#3 2019-06-14 18:54:37

martex
Member
Registered: 2019-06-14
Posts: 2

Re: Output devices are inverted

2ManyDogs wrote:

Please edit your post and use [ code ] tags when posting output.

https://wiki.archlinux.org/index.php/Co … s_and_code
https://bbs.archlinux.org/help.php#bbcode

Moving to Newbie Corner.

Sorry, I changed it. Thanks! smile

Offline

Pages: 1

Board footer

Powered by FluxBB