You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2019-06-14 10:09:08
- ArcoFreccia
- Member
- Registered: 2016-10-11
- Posts: 23
Bad Visualization of desktop enviroment
Hi,
i've the same problem in many PCs with arch linux and MATE Desktop Environment.
With both intel driver and nvidia driver (i need them for rendering operations) when i move windows or i watch videos i see lines on screen. It seems that the environment is unable to refresh the screen in time and the moving window appear to be separate in some points along a line.
I really don't know why, i think is a bad configuration of video drivers, but i reinstall them many times!
The image is not in high resolution, but the problem is shown.
Ideas? Thanks!!
Last edited by ArcoFreccia (2019-06-14 18:22:42)
Offline
#2 2019-06-14 10:39:42
- ugjka
- Member
- From: Latvia
- Registered: 2014-04-01
- Posts: 1,962
- Website
Re: Bad Visualization of desktop enviroment
Replace the large image with a thumbnail or link.
How did you setup the dual graphics?
Is there anything interesting in Xorg logs, dmesg or Journal?
Offline
#3 2019-06-14 18:36:08
- ArcoFreccia
- Member
- Registered: 2016-10-11
- Posts: 23
Re: Bad Visualization of desktop enviroment
the problem is that the same issue appear in a PC with only a Nvidia 1050 with mesa driver and nvidia driver and in a pc with intel, mesa and nvidia driver with bumblebee for the managing.
I think i don't have a xorg.config file and the log seems ok!
Offline
#4 2019-06-14 19:30:37
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,506
Re: Bad Visualization of desktop enviroment
and the log seems ok!
Then there's obviously no problem…
Getting us informed about your setup is not voluntary. Nobody can make any informed comment on top of the picture and the assertion that you "reinstalled drivers multiple times" (aka wasted a bunch of time, re-installing doesn't change anything)
Looks like tearing and there're many complaints about that reg. the nvidia blob, but eg. another very common reason is some output adapter (dvi-vga etc.) and framebuffer copying as happens w/ different optimus setups.
Also it will be necessary to elaborate on the effect, notably whether the tearline is steady or it wanders across the screen.
Last item is the software, notably the compositor in use, the backend (OpenGL/Xrender) and whether other compositors (eg. compton or kwin) are affected as well.
Online
#5 2019-06-14 20:00:24
- ArcoFreccia
- Member
- Registered: 2016-10-11
- Posts: 23
Re: Bad Visualization of desktop enviroment
this is the result of Xorg.0.log:
[ 8.388]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 8.388] Build Operating System: Linux Arch Linux
[ 8.388] Current Operating System: Linux ArcoLino 5.1.9-arch1-1-ARCH #1 SMP PREEMPT Tue Jun 11 16:18:09 UTC 2019 x86_64
[ 8.389] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e0372ec6-c47c-44ee-a023-c12f328dcd26 rw quiet
[ 8.389] Build Date: 30 May 2019 06:44:40PM
[ 8.389]
[ 8.389] Current version of pixman: 0.38.4
[ 8.389] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.389] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.389] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 14 20:21:19 2019
[ 8.392] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.393] (==) No Layout section. Using the first Screen section.
[ 8.393] (==) No screen section available. Using defaults.
[ 8.393] (**) |-->Screen "Default Screen Section" (0)
[ 8.393] (**) | |-->Monitor "<default monitor>"
[ 8.393] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.393] (==) Automatically adding devices
[ 8.393] (==) Automatically enabling devices
[ 8.393] (==) Automatically adding GPU devices
[ 8.393] (==) Automatically binding GPU devices
[ 8.393] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 8.396] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 8.396] Entry deleted from font path.
[ 8.399] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 8.399] Entry deleted from font path.
[ 8.399] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 8.399] Entry deleted from font path.
[ 8.399] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 8.399] Entry deleted from font path.
[ 8.399] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF
[ 8.399] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.399] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.399] (II) Module ABI versions:
[ 8.399] X.Org ANSI C Emulation: 0.4
[ 8.399] X.Org Video Driver: 24.0
[ 8.399] X.Org XInput driver : 24.1
[ 8.399] X.Org Server Extension : 10.0
[ 8.400] (++) using VT number 7
[ 8.400] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 8.400] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.413] (--) PCI:*(0@0:2:0) 8086:0416:17aa:3978 rev 6, Mem @ 0xd1000000/4194304, 0xc0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 8.413] (--) PCI: (1@0:0:0) 10de:1392:17aa:3978 rev 162, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 8.413] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 8.413] (II) LoadModule: "glx"
[ 8.414] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.421] (II) Module glx: vendor="X.Org Foundation"
[ 8.421] compiled for 1.20.5, module version = 1.0.0
[ 8.421] ABI class: X.Org Server Extension, version 10.0
[ 8.421] (II) Applying OutputClass "intel" to /dev/dri/card0
[ 8.421] loading driver: modesetting
[ 8.421] (==) Matched modesetting as autoconfigured driver 0
[ 8.421] (==) Matched intel as autoconfigured driver 1
[ 8.421] (==) Matched fbdev as autoconfigured driver 2
[ 8.421] (==) Matched vesa as autoconfigured driver 3
[ 8.421] (==) Assigned the driver to the xf86ConfigLayout
[ 8.421] (II) LoadModule: "modesetting"
[ 8.423] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.425] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.425] compiled for 1.20.5, module version = 1.20.5
[ 8.425] Module class: X.Org Video Driver
[ 8.425] ABI class: X.Org Video Driver, version 24.0
[ 8.425] (II) LoadModule: "intel"
[ 8.425] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 8.428] (II) Module intel: vendor="X.Org Foundation"
[ 8.428] compiled for 1.20.4, module version = 2.99.917
[ 8.428] Module class: X.Org Video Driver
[ 8.428] ABI class: X.Org Video Driver, version 24.0
[ 8.428] (II) LoadModule: "fbdev"
[ 8.428] (WW) Warning, couldn't open module fbdev
[ 8.428] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 8.428] (II) LoadModule: "vesa"
[ 8.428] (WW) Warning, couldn't open module vesa
[ 8.428] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 8.428] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 8.428] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 8.429] (II) intel: Driver for Intel(R) HD Graphics
[ 8.429] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 8.429] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 8.461] (II) modeset(0): using drv /dev/dri/card0
[ 8.461] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.461] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 8.461] (==) modeset(0): RGB weight 888
[ 8.461] (==) modeset(0): Default visual is TrueColor
[ 8.461] (II) Loading sub module "glamoregl"
[ 8.461] (II) LoadModule: "glamoregl"
[ 8.462] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 8.469] (II) Module glamoregl: vendor="X.Org Foundation"
[ 8.469] compiled for 1.20.5, module version = 1.0.1
[ 8.469] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.231] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) Haswell Mobile
[ 9.231] (II) modeset(0): glamor initialized
[ 9.232] (II) modeset(0): Output eDP-1 has no monitor section
[ 9.234] (II) modeset(0): Output HDMI-1 has no monitor section
[ 9.236] (II) modeset(0): EDID for output eDP-1
[ 9.236] (II) modeset(0): Manufacturer: CMN Model: 15c4 Serial#: 0
[ 9.236] (II) modeset(0): Year: 2013 Week: 40
[ 9.236] (II) modeset(0): EDID Version: 1.4
[ 9.236] (II) modeset(0): Digital Display Input
[ 9.236] (II) modeset(0): 6 bits per channel
[ 9.236] (II) modeset(0): Digital interface is DisplayPort
[ 9.236] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 9.236] (II) modeset(0): Gamma: 2.20
[ 9.236] (II) modeset(0): No DPMS capabilities specified
[ 9.236] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 9.236] (II) modeset(0): First detailed timing is preferred mode
[ 9.236] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 9.236] (II) modeset(0): redX: 0.565 redY: 0.330 greenX: 0.323 greenY: 0.577
[ 9.236] (II) modeset(0): blueX: 0.160 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 9.236] (II) modeset(0): Manufacturer's mask: 0
[ 9.236] (II) modeset(0): Supported detailed timing:
[ 9.236] (II) modeset(0): clock: 136.6 MHz Image Size: 344 x 193 mm
[ 9.236] (II) modeset(0): h_active: 1920 h_sync: 1964 h_sync_end 1992 h_blank_end 2070 h_border: 0
[ 9.236] (II) modeset(0): v_active: 1080 v_sync: 1082 v_sync_end 1086 v_blanking: 1100 v_border: 0
[ 9.236] (II) modeset(0): N156HGE-EAB
[ 9.236] (II) modeset(0): CMN
[ 9.236] (II) modeset(0): N156HGE-EAB
[ 9.236] (II) modeset(0): EDID (in hex):
[ 9.236] (II) modeset(0): 00ffffffffffff000daec41500000000
[ 9.236] (II) modeset(0): 281701049522137802ef059054529329
[ 9.236] (II) modeset(0): 25505400000001010101010101010101
[ 9.236] (II) modeset(0): 0101010101015e358096703814402c1c
[ 9.236] (II) modeset(0): 240058c110000018000000fe004e3135
[ 9.236] (II) modeset(0): 364847452d4541420a20000000fe0043
[ 9.236] (II) modeset(0): 4d4e0a202020202020202020000000fe
[ 9.236] (II) modeset(0): 004e3135364847452d4541420a20001d
[ 9.236] (II) modeset(0): Printing probed modes for output eDP-1
[ 9.236] (II) modeset(0): Modeline "1920x1080"x60.0 136.62 1920 1964 1992 2070 1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[ 9.236] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 9.236] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 9.236] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 9.236] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 9.236] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 9.236] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 9.236] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 9.236] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 9.236] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 9.236] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 9.236] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 9.236] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 9.236] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 9.236] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 9.236] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 9.236] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 9.236] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 9.236] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 9.236] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 9.236] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 9.236] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 9.236] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 9.236] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 9.236] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 9.236] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 9.236] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 9.236] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 9.236] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 9.236] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 9.236] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 9.236] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 9.236] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 9.236] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 9.236] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 9.236] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 9.236] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 9.236] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 9.236] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 9.236] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 9.236] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 9.236] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 9.236] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 9.236] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 9.236] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 9.236] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 9.236] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 9.236] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 9.236] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 9.236] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 9.236] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 9.236] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 9.236] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 9.236] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 9.236] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 9.236] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 9.236] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 9.238] (II) modeset(0): EDID for output HDMI-1
[ 9.238] (II) modeset(0): Output eDP-1 connected
[ 9.238] (II) modeset(0): Output HDMI-1 disconnected
[ 9.238] (II) modeset(0): Using exact sizes for initial modes
[ 9.238] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 9.238] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 9.238] (==) modeset(0): DPI set to (96, 96)
[ 9.238] (II) Loading sub module "fb"
[ 9.238] (II) LoadModule: "fb"
[ 9.238] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.239] (II) Module fb: vendor="X.Org Foundation"
[ 9.239] compiled for 1.20.5, module version = 1.0.0
[ 9.239] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.239] (II) UnloadModule: "intel"
[ 9.239] (II) Unloading intel
[ 9.261] (==) modeset(0): Backing store enabled
[ 9.261] (==) modeset(0): Silken mouse disabled
[ 9.326] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 9.326] (==) modeset(0): DPMS enabled
[ 9.327] (II) modeset(0): [DRI2] Setup complete
[ 9.327] (II) modeset(0): [DRI2] DRI driver: i965
[ 9.327] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 9.327] (II) Initializing extension Generic Event Extension
[ 9.327] (II) Initializing extension SHAPE
[ 9.327] (II) Initializing extension MIT-SHM
[ 9.327] (II) Initializing extension XInputExtension
[ 9.327] (II) Initializing extension XTEST
[ 9.327] (II) Initializing extension BIG-REQUESTS
[ 9.327] (II) Initializing extension SYNC
[ 9.328] (II) Initializing extension XKEYBOARD
[ 9.328] (II) Initializing extension XC-MISC
[ 9.328] (II) Initializing extension SECURITY
[ 9.328] (II) Initializing extension XFIXES
[ 9.328] (II) Initializing extension RENDER
[ 9.328] (II) Initializing extension RANDR
[ 9.328] (II) Initializing extension COMPOSITE
[ 9.329] (II) Initializing extension DAMAGE
[ 9.329] (II) Initializing extension MIT-SCREEN-SAVER
[ 9.329] (II) Initializing extension DOUBLE-BUFFER
[ 9.329] (II) Initializing extension RECORD
[ 9.329] (II) Initializing extension DPMS
[ 9.329] (II) Initializing extension Present
[ 9.329] (II) Initializing extension DRI3
[ 9.329] (II) Initializing extension X-Resource
[ 9.330] (II) Initializing extension XVideo
[ 9.330] (II) Initializing extension XVideo-MotionCompensation
[ 9.330] (II) Initializing extension GLX
[ 9.336] (II) AIGLX: Loaded and initialized i965
[ 9.336] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 9.336] (II) Initializing extension XFree86-VidModeExtension
[ 9.336] (II) Initializing extension XFree86-DGA
[ 9.336] (II) Initializing extension XFree86-DRI
[ 9.336] (II) Initializing extension DRI2
[ 9.351] (II) modeset(0): Damage tracking initialized
[ 9.351] (II) modeset(0): Setting screen physical size to 508 x 285
[ 9.405] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 9.405] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.405] (II) LoadModule: "libinput"
[ 9.405] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 9.409] (II) Module libinput: vendor="X.Org Foundation"
[ 9.409] compiled for 1.20.3, module version = 0.28.2
[ 9.409] Module class: X.Org XInput Driver
[ 9.409] ABI class: X.Org XInput driver, version 24.1
[ 9.409] (II) Using input driver 'libinput' for 'Power Button'
[ 9.409] (**) Power Button: always reports core events
[ 9.409] (**) Option "Device" "/dev/input/event3"
[ 9.409] (**) Option "_source" "server/udev"
[ 9.415] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 9.415] (II) event3 - Power Button: device is a keyboard
[ 9.415] (II) event3 - Power Button: device removed
[ 9.436] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 9.436] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 9.437] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 9.437] (II) event3 - Power Button: device is a keyboard
[ 9.438] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[ 9.438] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 9.438] (II) Using input driver 'libinput' for 'Video Bus'
[ 9.438] (**) Video Bus: always reports core events
[ 9.438] (**) Option "Device" "/dev/input/event16"
[ 9.438] (**) Option "_source" "server/udev"
[ 9.439] (II) event16 - Video Bus: is tagged by udev as: Keyboard
[ 9.439] (II) event16 - Video Bus: device is a keyboard
[ 9.439] (II) event16 - Video Bus: device removed
[ 9.503] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20/event16"
[ 9.503] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 9.504] (II) event16 - Video Bus: is tagged by udev as: Keyboard
[ 9.504] (II) event16 - Video Bus: device is a keyboard
[ 9.505] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 9.505] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.505] (II) Using input driver 'libinput' for 'Power Button'
[ 9.505] (**) Power Button: always reports core events
[ 9.505] (**) Option "Device" "/dev/input/event0"
[ 9.505] (**) Option "_source" "server/udev"
[ 9.506] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 9.506] (II) event0 - Power Button: device is a keyboard
[ 9.506] (II) event0 - Power Button: device removed
[ 9.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[ 9.530] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 9.531] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 9.531] (II) event0 - Power Button: device is a keyboard
[ 9.531] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 9.531] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 9.531] (II) Using input driver 'libinput' for 'Sleep Button'
[ 9.532] (**) Sleep Button: always reports core events
[ 9.532] (**) Option "Device" "/dev/input/event1"
[ 9.532] (**) Option "_source" "server/udev"
[ 9.533] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 9.533] (II) event1 - Sleep Button: device is a keyboard
[ 9.533] (II) event1 - Sleep Button: device removed
[ 9.556] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1/event1"
[ 9.556] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 9.558] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 9.558] (II) event1 - Sleep Button: device is a keyboard
[ 9.558] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 9.558] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 9.558] (II) Using input driver 'libinput' for 'Video Bus'
[ 9.558] (**) Video Bus: always reports core events
[ 9.558] (**) Option "Device" "/dev/input/event15"
[ 9.558] (**) Option "_source" "server/udev"
[ 9.559] (II) event15 - Video Bus: is tagged by udev as: Keyboard
[ 9.559] (II) event15 - Video Bus: device is a keyboard
[ 9.559] (II) event15 - Video Bus: device removed
[ 9.623] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:43/LNXVIDEO:00/input/input19/event15"
[ 9.623] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 9.624] (II) event15 - Video Bus: is tagged by udev as: Keyboard
[ 9.624] (II) event15 - Video Bus: device is a keyboard
[ 9.625] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 9.625] (II) No input driver specified, ignoring this device.
[ 9.625] (II) This device may have been added with another device file.
[ 9.626] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event18)
[ 9.626] (II) No input driver specified, ignoring this device.
[ 9.626] (II) This device may have been added with another device file.
[ 9.626] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event19)
[ 9.626] (II) No input driver specified, ignoring this device.
[ 9.626] (II) This device may have been added with another device file.
[ 9.627] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event20)
[ 9.627] (II) No input driver specified, ignoring this device.
[ 9.627] (II) This device may have been added with another device file.
[ 9.627] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event21)
[ 9.627] (II) No input driver specified, ignoring this device.
[ 9.627] (II) This device may have been added with another device file.
[ 9.628] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event22)
[ 9.628] (II) No input driver specified, ignoring this device.
[ 9.628] (II) This device may have been added with another device file.
[ 9.628] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event9)
[ 9.628] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "libinput keyboard catchall"
[ 9.628] (II) Using input driver 'libinput' for 'Lenovo EasyCamera: Lenovo EasyC'
[ 9.628] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[ 9.628] (**) Option "Device" "/dev/input/event9"
[ 9.628] (**) Option "_source" "server/udev"
[ 9.630] (II) event9 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[ 9.630] (II) event9 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[ 9.630] (II) event9 - Lenovo EasyCamera: Lenovo EasyC: device removed
[ 9.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input14/event9"
[ 9.676] (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 11)
[ 9.678] (II) event9 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[ 9.678] (II) event9 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[ 9.679] (II) config/udev: Adding input device Logitech G203 Prodigy Gaming Mouse (/dev/input/event6)
[ 9.679] (**) Logitech G203 Prodigy Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 9.679] (II) Using input driver 'libinput' for 'Logitech G203 Prodigy Gaming Mouse'
[ 9.679] (**) Logitech G203 Prodigy Gaming Mouse: always reports core events
[ 9.679] (**) Option "Device" "/dev/input/event6"
[ 9.679] (**) Option "_source" "server/udev"
[ 9.734] (II) event6 - Logitech G203 Prodigy Gaming Mouse: is tagged by udev as: Mouse
[ 9.734] (II) event6 - Logitech G203 Prodigy Gaming Mouse: device is a pointer
[ 9.734] (II) event6 - Logitech G203 Prodigy Gaming Mouse: device removed
[ 9.796] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/0003:046D:C084.0001/input/input8/event6"
[ 9.796] (II) XINPUT: Adding extended input device "Logitech G203 Prodigy Gaming Mouse" (type: MOUSE, id 12)
[ 9.796] (**) Option "AccelerationScheme" "none"
[ 9.796] (**) Logitech G203 Prodigy Gaming Mouse: (accel) selected scheme none/0
[ 9.796] (**) Logitech G203 Prodigy Gaming Mouse: (accel) acceleration factor: 2.000
[ 9.796] (**) Logitech G203 Prodigy Gaming Mouse: (accel) acceleration threshold: 4
[ 9.854] (II) event6 - Logitech G203 Prodigy Gaming Mouse: is tagged by udev as: Mouse
[ 9.854] (II) event6 - Logitech G203 Prodigy Gaming Mouse: device is a pointer
[ 9.855] (II) config/udev: Adding input device Logitech G203 Prodigy Gaming Mouse (/dev/input/mouse0)
[ 9.855] (II) No input driver specified, ignoring this device.
[ 9.855] (II) This device may have been added with another device file.
[ 9.856] (II) config/udev: Adding input device Logitech G203 Prodigy Gaming Mouse Consumer Control (/dev/input/event8)
[ 9.856] (**) Logitech G203 Prodigy Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.856] (II) Using input driver 'libinput' for 'Logitech G203 Prodigy Gaming Mouse Consumer Control'
[ 9.856] (**) Logitech G203 Prodigy Gaming Mouse Consumer Control: always reports core events
[ 9.856] (**) Option "Device" "/dev/input/event8"
[ 9.856] (**) Option "_source" "server/udev"
[ 9.858] (II) event8 - Logitech G203 Prodigy Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[ 9.858] (II) event8 - Logitech G203 Prodigy Gaming Mouse Consumer Control: device is a keyboard
[ 9.858] (II) event8 - Logitech G203 Prodigy Gaming Mouse Consumer Control: device removed
[ 9.890] (II) libinput: Logitech G203 Prodigy Gaming Mouse Consumer Control: needs a virtual subdevice
[ 9.890] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C084.0002/input/input10/event8"
[ 9.890] (II) XINPUT: Adding extended input device "Logitech G203 Prodigy Gaming Mouse Consumer Control" (type: MOUSE, id 13)
[ 9.890] (**) Option "AccelerationScheme" "none"
[ 9.890] (**) Logitech G203 Prodigy Gaming Mouse Consumer Control: (accel) selected scheme none/0
[ 9.890] (**) Logitech G203 Prodigy Gaming Mouse Consumer Control: (accel) acceleration factor: 2.000
[ 9.890] (**) Logitech G203 Prodigy Gaming Mouse Consumer Control: (accel) acceleration threshold: 4
[ 9.891] (II) event8 - Logitech G203 Prodigy Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[ 9.891] (II) event8 - Logitech G203 Prodigy Gaming Mouse Consumer Control: device is a keyboard
[ 9.892] (II) config/udev: Adding input device Logitech G203 Prodigy Gaming Mouse System Control (/dev/input/event10)
[ 9.892] (**) Logitech G203 Prodigy Gaming Mouse System Control: Applying InputClass "libinput keyboard catchall"
[ 9.892] (II) Using input driver 'libinput' for 'Logitech G203 Prodigy Gaming Mouse System Control'
[ 9.892] (**) Logitech G203 Prodigy Gaming Mouse System Control: always reports core events
[ 9.892] (**) Option "Device" "/dev/input/event10"
[ 9.892] (**) Option "_source" "server/udev"
[ 9.894] (II) event10 - Logitech G203 Prodigy Gaming Mouse System Control: is tagged by udev as: Keyboard
[ 9.894] (II) event10 - Logitech G203 Prodigy Gaming Mouse System Control: device is a keyboard
[ 9.894] (II) event10 - Logitech G203 Prodigy Gaming Mouse System Control: device removed
[ 9.930] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C084.0002/input/input11/event10"
[ 9.930] (II) XINPUT: Adding extended input device "Logitech G203 Prodigy Gaming Mouse System Control" (type: KEYBOARD, id 14)
[ 9.931] (II) event10 - Logitech G203 Prodigy Gaming Mouse System Control: is tagged by udev as: Keyboard
[ 9.931] (II) event10 - Logitech G203 Prodigy Gaming Mouse System Control: device is a keyboard
[ 9.932] (II) config/udev: Adding input device Logitech G203 Prodigy Gaming Mouse Keyboard (/dev/input/event7)
[ 9.932] (**) Logitech G203 Prodigy Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.932] (II) Using input driver 'libinput' for 'Logitech G203 Prodigy Gaming Mouse Keyboard'
[ 9.932] (**) Logitech G203 Prodigy Gaming Mouse Keyboard: always reports core events
[ 9.932] (**) Option "Device" "/dev/input/event7"
[ 9.932] (**) Option "_source" "server/udev"
[ 9.934] (II) event7 - Logitech G203 Prodigy Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 9.934] (II) event7 - Logitech G203 Prodigy Gaming Mouse Keyboard: device is a keyboard
[ 9.934] (II) event7 - Logitech G203 Prodigy Gaming Mouse Keyboard: device removed
[ 9.970] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C084.0002/input/input9/event7"
[ 9.970] (II) XINPUT: Adding extended input device "Logitech G203 Prodigy Gaming Mouse Keyboard" (type: KEYBOARD, id 15)
[ 9.971] (II) event7 - Logitech G203 Prodigy Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[ 9.971] (II) event7 - Logitech G203 Prodigy Gaming Mouse Keyboard: device is a keyboard
[ 9.972] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 9.972] (II) No input driver specified, ignoring this device.
[ 9.972] (II) This device may have been added with another device file.
[ 9.973] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 9.973] (II) No input driver specified, ignoring this device.
[ 9.973] (II) This device may have been added with another device file.
[ 9.973] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 9.973] (II) No input driver specified, ignoring this device.
[ 9.973] (II) This device may have been added with another device file.
[ 9.974] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event14)
[ 9.974] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 9.974] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 9.974] (**) Ideapad extra buttons: always reports core events
[ 9.974] (**) Option "Device" "/dev/input/event14"
[ 9.974] (**) Option "_source" "server/udev"
[ 9.975] (II) event14 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 9.975] (II) event14 - Ideapad extra buttons: device is a keyboard
[ 9.975] (II) event14 - Ideapad extra buttons: device removed
[ 10.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input18/event14"
[ 10.036] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 16)
[ 10.038] (II) event14 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 10.038] (II) event14 - Ideapad extra buttons: device is a keyboard
[ 10.039] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 10.039] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.039] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 10.039] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.039] (**) Option "Device" "/dev/input/event4"
[ 10.039] (**) Option "_source" "server/udev"
[ 10.040] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 10.040] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 10.041] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 10.076] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 10.076] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[ 10.078] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 10.078] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 10.080] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 10.080] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 10.080] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 10.080] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.080] (**) Option "Device" "/dev/input/event17"
[ 10.080] (**) Option "_source" "server/udev"
[ 10.081] (II) event17 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 10.138] (II) event17 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 10.138] (II) event17 - SynPS/2 Synaptics TouchPad: device removed
[ 10.196] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event17"
[ 10.197] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 18)
[ 10.198] (**) Option "AccelerationScheme" "none"
[ 10.198] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 10.198] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 10.198] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 10.199] (II) event17 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 10.212] (II) event17 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 10.213] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 10.213] (II) No input driver specified, ignoring this device.
[ 10.213] (II) This device may have been added with another device file.
[ 10.213] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 10.213] (II) No input driver specified, ignoring this device.
[ 10.213] (II) This device may have been added with another device file.
[ 10.216] (**) Logitech G203 Prodigy Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 10.216] (II) Using input driver 'libinput' for 'Logitech G203 Prodigy Gaming Mouse Consumer Control'
[ 10.216] (**) Logitech G203 Prodigy Gaming Mouse Consumer Control: always reports core events
[ 10.216] (**) Option "Device" "/dev/input/event8"
[ 10.216] (**) Option "_source" "_driver/libinput"
[ 10.216] (II) libinput: Logitech G203 Prodigy Gaming Mouse Consumer Control: is a virtual subdevice
[ 10.216] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C084.0002/input/input10/event8"
[ 10.216] (II) XINPUT: Adding extended input device "Logitech G203 Prodigy Gaming Mouse Consumer Control" (type: KEYBOARD, id 19)
[ 12.804] (II) modeset(0): EDID vendor "CMN", prod id 5572
[ 12.804] (II) modeset(0): Printing DDC gathered Modelines:
[ 12.804] (II) modeset(0): Modeline "1920x1080"x0.0 136.62 1920 1964 1992 2070 1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[ 12.807] (II) modeset(0): EDID vendor "CMN", prod id 5572
[ 12.807] (II) modeset(0): Printing DDC gathered Modelines:
[ 12.807] (II) modeset(0): Modeline "1920x1080"x0.0 136.62 1920 1964 1992 2070 1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[ 12.811] (II) modeset(0): EDID vendor "CMN", prod id 5572
[ 12.811] (II) modeset(0): Printing DDC gathered Modelines:
[ 12.811] (II) modeset(0): Modeline "1920x1080"x0.0 136.62 1920 1964 1992 2070 1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[ 12.814] (II) modeset(0): EDID vendor "CMN", prod id 5572
[ 12.814] (II) modeset(0): Printing DDC gathered Modelines:
[ 12.814] (II) modeset(0): Modeline "1920x1080"x0.0 136.62 1920 1964 1992 2070 1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[ 13.298] (II) modeset(0): EDID vendor "CMN", prod id 5572
[ 13.298] (II) modeset(0): Printing DDC gathered Modelines:
[ 13.298] (II) modeset(0): Modeline "1920x1080"x0.0 136.62 1920 1964 1992 2070 1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[ 1225.235] (EE) Failed to open authorization file "/run/lightdm/root/:0": No such file or directorythis from Xorg.8.log:
[ 668.449]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 668.449] Build Operating System: Linux Arch Linux
[ 668.449] Current Operating System: Linux ArcoLino 5.1.8-arch1-1-ARCH #1 SMP PREEMPT Sun Jun 9 20:28:28 UTC 2019 x86_64
[ 668.449] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e0372ec6-c47c-44ee-a023-c12f328dcd26 rw quiet
[ 668.450] Build Date: 30 May 2019 06:44:40PM
[ 668.450]
[ 668.450] Current version of pixman: 0.38.4
[ 668.450] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 668.450] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 668.450] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Jun 11 00:39:44 2019
[ 668.450] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 668.450] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 668.450] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 668.450] (==) ServerLayout "Layout0"
[ 668.450] (==) No screen section available. Using defaults.
[ 668.450] (**) |-->Screen "Default Screen Section" (0)
[ 668.450] (**) | |-->Monitor "<default monitor>"
[ 668.450] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 668.450] (**) | |-->Device "DiscreteNvidia"
[ 668.450] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 668.450] (**) Option "AutoAddDevices" "false"
[ 668.450] (**) Option "AutoAddGPU" "false"
[ 668.450] (**) Not automatically adding devices
[ 668.450] (==) Automatically enabling devices
[ 668.450] (**) Not automatically adding GPU devices
[ 668.450] (==) Automatically binding GPU devices
[ 668.450] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 668.450] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 668.450] Entry deleted from font path.
[ 668.450] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 668.450] Entry deleted from font path.
[ 668.450] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 668.450] Entry deleted from font path.
[ 668.450] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 668.450] Entry deleted from font path.
[ 668.450] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF
[ 668.450] (++) ModulePath set to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[ 668.450] (==) |-->Input Device "<default pointer>"
[ 668.450] (==) |-->Input Device "<default keyboard>"
[ 668.450] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 668.450] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 668.450] (II) Module ABI versions:
[ 668.450] X.Org ANSI C Emulation: 0.4
[ 668.450] X.Org Video Driver: 24.0
[ 668.450] X.Org XInput driver : 24.1
[ 668.450] X.Org Server Extension : 10.0
[ 668.451] (--) using VT number 7
[ 668.451] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 668.451] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 668.451] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 668.454] (--) PCI:*(1@0:0:0) 10de:1392:17aa:3978 rev 162, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 668.454] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 668.454] (II) LoadModule: "glx"
[ 668.454] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 668.455] (II) Module glx: vendor="X.Org Foundation"
[ 668.455] compiled for 1.20.5, module version = 1.0.0
[ 668.455] ABI class: X.Org Server Extension, version 10.0
[ 668.455] (II) LoadModule: "nvidia"
[ 668.455] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 668.456] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 668.456] compiled for 1.6.99.901, module version = 1.0.0
[ 668.456] Module class: X.Org Video Driver
[ 668.456] (II) LoadModule: "mouse"
[ 668.456] (WW) Warning, couldn't open module mouse
[ 668.456] (EE) Failed to load module "mouse" (module does not exist, 0)
[ 668.456] (II) LoadModule: "kbd"
[ 668.456] (WW) Warning, couldn't open module kbd
[ 668.456] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 668.456] (II) NVIDIA dlloader X Driver 430.14 Tue May 7 20:03:40 CDT 2019
[ 668.456] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 668.456] (II) Loading sub module "fb"
[ 668.456] (II) LoadModule: "fb"
[ 668.456] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 668.456] (II) Module fb: vendor="X.Org Foundation"
[ 668.456] compiled for 1.20.5, module version = 1.0.0
[ 668.456] ABI class: X.Org ANSI C Emulation, version 0.4
[ 668.456] (II) Loading sub module "wfb"
[ 668.456] (II) LoadModule: "wfb"
[ 668.456] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 668.457] (II) Module wfb: vendor="X.Org Foundation"
[ 668.457] compiled for 1.20.5, module version = 1.0.0
[ 668.457] ABI class: X.Org ANSI C Emulation, version 0.4
[ 668.457] (II) Loading sub module "ramdac"
[ 668.457] (II) LoadModule: "ramdac"
[ 668.457] (II) Module "ramdac" already built-in
[ 668.457] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 668.457] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 668.457] (==) NVIDIA(0): RGB weight 888
[ 668.457] (==) NVIDIA(0): Default visual is TrueColor
[ 668.457] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 668.457] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 668.457] (**) NVIDIA(0): Option "UseEDID" "false"
[ 668.457] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 668.457] (**) NVIDIA(0): Enabling 2D acceleration
[ 668.457] (**) NVIDIA(0): Ignoring EDIDs
[ 668.457] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 668.457] (**) NVIDIA(0): mode
[ 668.457] (II) Loading sub module "glxserver_nvidia"
[ 668.457] (II) LoadModule: "glxserver_nvidia"
[ 668.457] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 668.460] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 668.460] compiled for 1.6.99.901, module version = 1.0.0
[ 668.460] Module class: X.Org Server Extension
[ 668.460] (II) NVIDIA GLX Module 430.14 Tue May 7 20:02:40 CDT 2019
[ 668.629] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 860M (GM107-A) at PCI:1:0:0 (GPU-0)
[ 668.629] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 668.629] (--) NVIDIA(0): VideoBIOS: 82.07.34.00.08
[ 668.629] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 668.629] (II) NVIDIA(0): Validated MetaModes:
[ 668.629] (II) NVIDIA(0): "NULL"
[ 668.629] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 668.629] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 668.629] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 668.629] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 668.629] (II) NVIDIA: access.
[ 668.632] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 668.632] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 668.632] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 668.632] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 668.632] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 668.632] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 668.632] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 668.632] (II) NVIDIA(0): Config Options in the README.
[ 668.651] (II) NVIDIA(0): Setting mode "NULL"
[ 668.654] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 668.654] (==) NVIDIA(0): Backing store enabled
[ 668.654] (==) NVIDIA(0): Silken mouse disabled
[ 668.654] (==) NVIDIA(0): DPMS enabled
[ 668.654] (WW) NVIDIA(0): Option "NoLogo" is not used
[ 668.654] (II) Loading sub module "dri2"
[ 668.654] (II) LoadModule: "dri2"
[ 668.654] (II) Module "dri2" already built-in
[ 668.654] (II) NVIDIA(0): [DRI2] Setup complete
[ 668.654] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 668.654] (II) Initializing extension Generic Event Extension
[ 668.654] (II) Initializing extension SHAPE
[ 668.655] (II) Initializing extension MIT-SHM
[ 668.655] (II) Initializing extension XInputExtension
[ 668.655] (II) Initializing extension XTEST
[ 668.655] (II) Initializing extension BIG-REQUESTS
[ 668.655] (II) Initializing extension SYNC
[ 668.655] (II) Initializing extension XKEYBOARD
[ 668.655] (II) Initializing extension XC-MISC
[ 668.655] (II) Initializing extension SECURITY
[ 668.655] (II) Initializing extension XFIXES
[ 668.655] (II) Initializing extension RENDER
[ 668.655] (II) Initializing extension RANDR
[ 668.656] (II) Initializing extension COMPOSITE
[ 668.656] (II) Initializing extension DAMAGE
[ 668.656] (II) Initializing extension MIT-SCREEN-SAVER
[ 668.656] (II) Initializing extension DOUBLE-BUFFER
[ 668.656] (II) Initializing extension RECORD
[ 668.656] (II) Initializing extension DPMS
[ 668.656] (II) Initializing extension Present
[ 668.656] (II) Initializing extension DRI3
[ 668.656] (II) Initializing extension X-Resource
[ 668.656] (II) Initializing extension XVideo
[ 668.656] (II) Initializing extension XVideo-MotionCompensation
[ 668.656] (II) Initializing extension GLX
[ 668.656] (II) Initializing extension GLX
[ 668.656] (II) Indirect GLX disabled.
[ 668.656] (II) GLX: Another vendor is already registered for screen 0
[ 668.656] (II) Initializing extension XFree86-VidModeExtension
[ 668.656] (II) Initializing extension XFree86-DGA
[ 668.657] (II) Initializing extension XFree86-DRI
[ 668.657] (II) Initializing extension DRI2
[ 668.657] (II) Initializing extension NV-GLX
[ 668.657] (II) Initializing extension NV-CONTROL
[ 668.677] (II) LoadModule: "mouse"
[ 668.677] (WW) Warning, couldn't open module mouse
[ 668.677] (EE) Failed to load module "mouse" (module does not exist, 0)
[ 668.677] (EE) No input driver matching `mouse'
[ 668.677] (II) Falling back to input driver `libinput'
[ 668.677] (II) LoadModule: "libinput"
[ 668.678] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 668.679] (II) Module libinput: vendor="X.Org Foundation"
[ 668.679] compiled for 1.20.3, module version = 0.28.2
[ 668.679] Module class: X.Org XInput Driver
[ 668.679] ABI class: X.Org XInput driver, version 24.1
[ 668.679] (II) Using input driver 'libinput' for '<default pointer>'
[ 668.679] (**) Option "CorePointer" "on"
[ 668.679] (**) <default pointer>: always reports core events
[ 668.679] (EE) PreInit returned 2 for "<default pointer>"
[ 668.679] (II) UnloadModule: "libinput"
[ 668.679] (II) LoadModule: "kbd"
[ 668.679] (WW) Warning, couldn't open module kbd
[ 668.679] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 668.679] (EE) No input driver matching `kbd'
[ 668.679] (II) Falling back to input driver `libinput'
[ 668.679] (II) Using input driver 'libinput' for '<default keyboard>'
[ 668.679] (**) Option "CoreKeyboard" "on"
[ 668.679] (**) <default keyboard>: always reports core events
[ 668.679] (EE) PreInit returned 2 for "<default keyboard>"
[ 668.679] (II) UnloadModule: "libinput"
[ 668.686] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 668.686] (II) AutoAddDevices is off - not adding device.
[ 668.686] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[ 668.686] (II) AutoAddDevices is off - not adding device.
[ 668.687] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 668.687] (II) AutoAddDevices is off - not adding device.
[ 668.687] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 668.687] (II) AutoAddDevices is off - not adding device.
[ 668.687] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 668.687] (II) AutoAddDevices is off - not adding device.
[ 668.688] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 668.688] (II) AutoAddDevices is off - not adding device.
[ 668.688] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 668.688] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 668.688] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 668.688] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event18)
[ 668.688] (II) AutoAddDevices is off - not adding device.
[ 668.688] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event19)
[ 668.688] (II) AutoAddDevices is off - not adding device.
[ 668.688] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event20)
[ 668.688] (II) AutoAddDevices is off - not adding device.
[ 668.689] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event21)
[ 668.689] (II) AutoAddDevices is off - not adding device.
[ 668.689] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event22)
[ 668.689] (II) AutoAddDevices is off - not adding device.
[ 668.689] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event8)
[ 668.689] (II) AutoAddDevices is off - not adding device.
[ 668.689] (II) config/udev: Adding input device Logitech G203 Prodigy Gaming Mouse (/dev/input/event6)
[ 668.689] (II) AutoAddDevices is off - not adding device.
[ 668.690] (II) config/udev: Adding input device Logitech G203 Prodigy Gaming Mouse (/dev/input/mouse0)
[ 668.690] (II) AutoAddDevices is off - not adding device.
[ 668.690] (II) config/udev: Adding input device Logitech G203 Prodigy Gaming Mouse Consumer Control (/dev/input/event9)
[ 668.690] (II) AutoAddDevices is off - not adding device.
[ 668.691] (II) config/udev: Adding input device Logitech G203 Prodigy Gaming Mouse System Control (/dev/input/event10)
[ 668.691] (II) AutoAddDevices is off - not adding device.
[ 668.691] (II) config/udev: Adding input device Logitech G203 Prodigy Gaming Mouse Keyboard (/dev/input/event7)
[ 668.691] (II) AutoAddDevices is off - not adding device.
[ 668.691] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 668.691] (II) AutoAddDevices is off - not adding device.
[ 668.691] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 668.691] (II) AutoAddDevices is off - not adding device.
[ 668.692] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 668.692] (II) AutoAddDevices is off - not adding device.
[ 668.692] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event11)
[ 668.692] (II) AutoAddDevices is off - not adding device.
[ 668.692] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 668.692] (II) AutoAddDevices is off - not adding device.
[ 668.693] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 668.693] (II) AutoAddDevices is off - not adding device.
[ 668.693] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 668.693] (II) AutoAddDevices is off - not adding device.
[ 668.693] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 668.693] (II) AutoAddDevices is off - not adding device.
[ 763.592] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 763.593] (II) Server terminated successfully (0). Closing log file.and this from dmsg:
dmesg -
[ 0.000000] Linux version 5.1.9-arch1-1-ARCH (builduser@heftig-25959) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Tue Jun 11 16:18:09 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e0372ec6-c47c-44ee-a023-c12f328dcd26 rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000076a6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076a70000-0x0000000077e6ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077e70000-0x000000009cabefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20378/Lenovo Y50-70, BIOS 9ECN43WW(V3.03) 08/12/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.482 MHz processor
[ 0.001979] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001981] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001987] last_pfn = 0x45f600 max_arch_pfn = 0x400000000
[ 0.001991] MTRR default type: uncachable
[ 0.001991] MTRR fixed ranges enabled:
[ 0.001993] 00000-9FFFF write-back
[ 0.001993] A0000-BFFFF uncachable
[ 0.001994] C0000-E7FFF write-protect
[ 0.001995] E8000-EFFFF write-combining
[ 0.001996] F0000-FFFFF write-protect
[ 0.001996] MTRR variable ranges enabled:
[ 0.001998] 0 base 0000000000 mask 7F80000000 write-back
[ 0.001999] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.001999] 2 base 009D000000 mask 7FFF000000 uncachable
[ 0.002000] 3 base 009E000000 mask 7FFE000000 uncachable
[ 0.002001] 4 base 00FF800000 mask 7FFF800000 write-protect
[ 0.002002] 5 base 0100000000 mask 7F00000000 write-back
[ 0.002002] 6 base 0200000000 mask 7E00000000 write-back
[ 0.002003] 7 base 0400000000 mask 7F80000000 write-back
[ 0.002004] 8 base 045F600000 mask 7FFFE00000 uncachable
[ 0.002005] 9 base 045F800000 mask 7FFF800000 uncachable
[ 0.002848] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003025] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.010954] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[ 0.011289] check: Scanning 1 areas for low memory corruption
[ 0.011292] Using GB pages for direct mapping
[ 0.011294] BRK [0x90e01000, 0x90e01fff] PGTABLE
[ 0.011296] BRK [0x90e02000, 0x90e02fff] PGTABLE
[ 0.011297] BRK [0x90e03000, 0x90e03fff] PGTABLE
[ 0.011311] BRK [0x90e04000, 0x90e04fff] PGTABLE
[ 0.011313] BRK [0x90e05000, 0x90e05fff] PGTABLE
[ 0.011314] BRK [0x90e06000, 0x90e06fff] PGTABLE
[ 0.011450] BRK [0x90e07000, 0x90e07fff] PGTABLE
[ 0.011464] BRK [0x90e08000, 0x90e08fff] PGTABLE
[ 0.011549] BRK [0x90e09000, 0x90e09fff] PGTABLE
[ 0.011591] RAMDISK: [mem 0x36e45000-0x37719fff]
[ 0.011596] ACPI: Early table checksum verification disabled
[ 0.011811] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.011814] ACPI: XSDT 0x000000009CFFE210 0000AC (v01 LENOVO CB-01 00000001 01000013)
[ 0.011819] ACPI: FACP 0x000000009CFF8000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011824] ACPI: DSDT 0x000000009CFEA000 00AC25 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011827] ACPI: FACS 0x000000009CFBA000 000040
[ 0.011829] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011831] ACPI: FPDT 0x000000009CFFB000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011834] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011836] ACPI: HPET 0x000000009CFF7000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011839] ACPI: APIC 0x000000009CFF6000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011841] ACPI: MCFG 0x000000009CFF5000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011843] ACPI: SSDT 0x000000009CFE7000 002028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011846] ACPI: BOOT 0x000000009CFE5000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011848] ACPI: LPIT 0x000000009CFE4000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011851] ACPI: ASPT 0x000000009CFE2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011853] ACPI: DBGP 0x000000009CFE1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011856] ACPI: SSDT 0x000000009CFE0000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011858] ACPI: SSDT 0x000000009CFDF000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011860] ACPI: SSDT 0x000000009CFDB000 00348C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011863] ACPI: SSDT 0x000000009CFD5000 003E76 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011865] ACPI: DMAR 0x000000009CFD9000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.011873] ACPI: Local APIC address 0xfee00000
[ 0.011948] No NUMA configuration found
[ 0.011949] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
[ 0.011953] NODE_DATA(0) allocated [mem 0x45f5f9000-0x45f5fcfff]
[ 0.011977] Zone ranges:
[ 0.011978] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011979] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011980] Normal [mem 0x0000000100000000-0x000000045f5fffff]
[ 0.011981] Device empty
[ 0.011982] Movable zone start for each node
[ 0.011982] Early memory node ranges
[ 0.011983] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.011984] node 0: [mem 0x0000000000100000-0x0000000076a6ffff]
[ 0.011984] node 0: [mem 0x0000000077e70000-0x000000009cabefff]
[ 0.011985] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
[ 0.011986] node 0: [mem 0x0000000100000000-0x000000045f5fffff]
[ 0.012263] Zeroed struct page in unavailable ranges: 18852 pages
[ 0.012264] Initmem setup node 0 [mem 0x0000000000001000-0x000000045f5fffff]
[ 0.012265] On node 0 totalpages: 4172892
[ 0.012266] DMA zone: 64 pages used for memmap
[ 0.012267] DMA zone: 21 pages reserved
[ 0.012267] DMA zone: 3996 pages, LIFO batch:0
[ 0.012354] DMA32 zone: 9883 pages used for memmap
[ 0.012354] DMA32 zone: 632512 pages, LIFO batch:63
[ 0.026722] Normal zone: 55256 pages used for memmap
[ 0.026723] Normal zone: 3536384 pages, LIFO batch:63
[ 0.099641] Reserving Intel graphics memory at [mem 0x9da00000-0x9f9fffff]
[ 0.099780] ACPI: PM-Timer IO Port: 0x1808
[ 0.099781] ACPI: Local APIC address 0xfee00000
[ 0.099796] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.099798] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.099800] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.099801] ACPI: IRQ0 used by override.
[ 0.099802] ACPI: IRQ9 used by override.
[ 0.099803] Using ACPI (MADT) for SMP configuration information
[ 0.099805] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.099809] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[ 0.099810] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.099824] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.099826] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.099826] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.099827] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.099827] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.099829] PM: Registered nosave memory: [mem 0x76a70000-0x77e6ffff]
[ 0.099830] PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff]
[ 0.099831] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[ 0.099831] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[ 0.099832] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.099833] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.099834] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.099834] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.099835] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.099835] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.099836] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.099836] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.099837] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.099837] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.099838] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.099840] [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.099841] Booting paravirtualized kernel on bare hardware
[ 0.099843] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.215089] random: get_random_bytes called from start_kernel+0x96/0x538 with crng_init=0
[ 0.215095] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.215280] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144
[ 0.215286] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.215287] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.215303] Built 1 zonelists, mobility grouping on. Total pages: 4107668
[ 0.215304] Policy zone: Normal
[ 0.215305] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e0372ec6-c47c-44ee-a023-c12f328dcd26 rw quiet
[ 0.218873] Calgary: detecting Calgary via BIOS EBDA area
[ 0.218875] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.260291] Memory: 16324048K/16691568K available (12291K kernel code, 1317K rwdata, 3768K rodata, 1564K init, 3740K bss, 367520K reserved, 0K cma-reserved)
[ 0.260441] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.260446] Kernel/User page tables isolation: enabled
[ 0.260460] ftrace: allocating 37095 entries in 145 pages
[ 0.274758] rcu: Preemptible hierarchical RCU implementation.
[ 0.274758] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.274759] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.274760] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.274760] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.274761] Tasks RCU enabled.
[ 0.274762] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.274762] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.276311] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.276469] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.276511] Console: colour dummy device 80x25
[ 0.276516] printk: console [tty0] enabled
[ 0.276532] ACPI: Core revision 20190215
[ 0.276752] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.276761] hpet clockevent registered
[ 0.276766] APIC: Switch to symmetric I/O mode setup
[ 0.276767] DMAR: Host address width 39
[ 0.276768] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.276772] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.276773] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.276776] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.276777] DMAR: RMRR base: 0x0000009cdf9000 end: 0x0000009ce18fff
[ 0.276778] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
[ 0.276779] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.276780] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.276781] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.277198] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.277199] x2apic enabled
[ 0.277205] Switched APIC routing to cluster x2apic.
[ 0.277627] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.293432] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f4dd49dac, max_idle_ns: 440795256526 ns
[ 0.293444] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.83 BogoMIPS (lpj=8314940)
[ 0.293446] pid_max: default: 32768 minimum: 301
[ 0.293477] LSM: Security Framework initializing
[ 0.293480] Yama: becoming mindful.
[ 0.295796] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.296967] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.297016] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.297054] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.297203] *** VALIDATE proc ***
[ 0.297252] *** VALIDATE cgroup1 ***
[ 0.297253] *** VALIDATE cgroup2 ***
[ 0.297279] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.297280] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.297298] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.297311] process: using mwait in idle threads
[ 0.297314] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.297314] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.297316] Spectre V2 : Mitigation: Full generic retpoline
[ 0.297316] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.297317] Speculative Store Bypass: Vulnerable
[ 0.297343] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.297506] Freeing SMP alternatives memory: 32K
[ 0.300099] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.310111] mce: [Hardware Error]: Machine check events logged
[ 0.310113] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 6: ae0000000040110a
[ 0.310117] mce: [Hardware Error]: TSC 0 ADDR ff887500 MISC 78a0000086
[ 0.310121] mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1560543671 SOCKET 0 APIC 0 microcode 1c
[ 0.316786] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.316828] ... version: 3
[ 0.316828] ... bit width: 48
[ 0.316829] ... generic registers: 4
[ 0.316830] ... value mask: 0000ffffffffffff
[ 0.316830] ... max period: 00007fffffffffff
[ 0.316831] ... fixed-purpose events: 3
[ 0.316831] ... event mask: 000000070000000f
[ 0.323449] rcu: Hierarchical SRCU implementation.
[ 0.343935] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.350117] smp: Bringing up secondary CPUs ...
[ 0.390127] x86: Booting SMP configuration:
[ 0.390128] .... node #0, CPUs: #1
[ 0.390512] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.430115] #2 #3 #4 #5 #6 #7
[ 0.630461] smp: Brought up 1 node, 8 CPUs
[ 0.630461] smpboot: Max logical packages: 1
[ 0.630461] smpboot: Total of 8 processors activated (39927.70 BogoMIPS)
[ 0.633825] devtmpfs: initialized
[ 0.633825] x86/mm: Memory block size: 128MB
[ 0.634510] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[ 0.634510] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.634510] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.634510] pinctrl core: initialized pinctrl subsystem
[ 0.634510] PM: RTC time: 20:21:11, date: 2019-06-14
[ 0.634510] NET: Registered protocol family 16
[ 0.634510] audit: initializing netlink subsys (disabled)
[ 0.634510] audit: type=2000 audit(1560543671.356:1): state=initialized audit_enabled=0 res=1
[ 0.634510] cpuidle: using governor ladder
[ 0.634510] cpuidle: using governor menu
[ 0.634510] Simple Boot Flag at 0x44 set to 0x1
[ 0.634510] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.634510] ACPI: bus type PCI registered
[ 0.634510] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.634510] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.634510] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.634510] PCI: Using configuration type 1 for base access
[ 0.634510] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.637153] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.637153] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.637153] fbcon: Taking over console
[ 0.637153] ACPI: Added _OSI(Module Device)
[ 0.637153] ACPI: Added _OSI(Processor Device)
[ 0.637153] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.637153] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.637153] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.637153] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.637153] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.651242] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.653777] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.655516] ACPI: Dynamic OEM Table Load:
[ 0.655522] ACPI: SSDT 0xFFFF9F018C81B800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.656132] ACPI: Dynamic OEM Table Load:
[ 0.656138] ACPI: SSDT 0xFFFF9F018CFC0800 0005AA (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.656790] ACPI: Dynamic OEM Table Load:
[ 0.656794] ACPI: SSDT 0xFFFF9F018C443400 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.658997] ACPI: EC: EC started
[ 0.658998] ACPI: EC: interrupt blocked
[ 0.688503] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.688505] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.688506] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.688506] ACPI: Interpreter enabled
[ 0.688538] ACPI: (supports S0 S3 S4 S5)
[ 0.688538] ACPI: Using IOAPIC for interrupt routing
[ 0.688565] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.688872] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.693848] ACPI: Power Resource [PG00] (on)
[ 0.693875] ACPI: Power Resource [NVP2] (on)
[ 0.698006] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.698010] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.698194] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.698900] PCI host bridge to bus 0000:00
[ 0.698902] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.698903] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.698904] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.698905] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.698906] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.698913] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.699087] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.699130] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.699343] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.699354] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
[ 0.699359] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.699363] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 0.699554] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.699563] pci 0000:00:03.0: reg 0x10: [mem 0xd1710000-0xd1713fff 64bit]
[ 0.699755] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.699776] pci 0000:00:14.0: reg 0x10: [mem 0xd1700000-0xd170ffff 64bit]
[ 0.699835] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.699994] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.700015] pci 0000:00:16.0: reg 0x10: [mem 0xd1718000-0xd171800f 64bit]
[ 0.700078] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.700250] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.700271] pci 0000:00:1a.0: reg 0x10: [mem 0xd171d000-0xd171d3ff]
[ 0.700352] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.700517] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.700537] pci 0000:00:1b.0: reg 0x10: [mem 0xd1714000-0xd1717fff 64bit]
[ 0.700606] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.700765] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.700847] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.701061] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.701141] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.701353] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.701433] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.701600] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.701679] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.701894] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.701915] pci 0000:00:1d.0: reg 0x10: [mem 0xd171c000-0xd171c3ff]
[ 0.701996] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.702160] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.702416] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.702433] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
[ 0.702440] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
[ 0.702447] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
[ 0.702454] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
[ 0.702461] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 0.702468] pci 0000:00:1f.2: reg 0x24: [mem 0xd171b000-0xd171b7ff]
[ 0.702504] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.702660] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.702678] pci 0000:00:1f.3: reg 0x10: [mem 0xd1719000-0xd17190ff 64bit]
[ 0.702697] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f]
[ 0.702913] pci 0000:01:00.0: [10de:1392] type 00 class 0x030200
[ 0.702939] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
[ 0.702956] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.702973] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.702984] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 0.702995] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.703179] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.703181] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.703182] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.703185] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.703230] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.703302] pci 0000:08:00.0: [10ec:b723] type 00 class 0x028000
[ 0.703337] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.703368] pci 0000:08:00.0: reg 0x18: [mem 0xd1600000-0xd1603fff 64bit]
[ 0.703509] pci 0000:08:00.0: supports D1 D2
[ 0.703510] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.703642] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.703646] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.703649] pci 0000:00:1c.1: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.703713] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
[ 0.703745] pci 0000:09:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.703773] pci 0000:09:00.0: reg 0x18: [mem 0xd1504000-0xd1504fff 64bit]
[ 0.703791] pci 0000:09:00.0: reg 0x20: [mem 0xd1500000-0xd1503fff 64bit]
[ 0.703898] pci 0000:09:00.0: supports D1 D2
[ 0.703899] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.704025] pci 0000:00:1c.2: PCI bridge to [bus 09]
[ 0.704028] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.704031] pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.704148] pci 0000:0a:00.0: [10ec:5249] type 00 class 0xff0000
[ 0.704187] pci 0000:0a:00.0: reg 0x10: [mem 0xd1400000-0xd1400fff]
[ 0.704491] pci 0000:0a:00.0: supports D1 D2
[ 0.704491] pci 0000:0a:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.704704] pci 0000:00:1c.4: PCI bridge to [bus 0a]
[ 0.704709] pci 0000:00:1c.4: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.757334] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.757399] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.757460] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.757523] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.757583] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.757643] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.757703] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.757762] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.757943] ACPI: EC: interrupt unblocked
[ 0.757957] ACPI: EC: event unblocked
[ 0.757963] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.757964] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.758033] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.758033] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.758033] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.758033] vgaarb: loaded
[ 0.758033] ACPI: bus type USB registered
[ 0.758033] usbcore: registered new interface driver usbfs
[ 0.758033] usbcore: registered new interface driver hub
[ 0.758033] usbcore: registered new device driver usb
[ 0.758033] pps_core: LinuxPPS API ver. 1 registered
[ 0.758033] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.758033] PTP clock support registered
[ 0.758033] EDAC MC: Ver: 3.0.0
[ 0.758033] PCI: Using ACPI for IRQ routing
[ 0.764261] PCI: pci_cache_line_size set to 64 bytes
[ 0.764331] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.764332] e820: reserve RAM buffer [mem 0x76a70000-0x77ffffff]
[ 0.764332] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff]
[ 0.764334] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.764334] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
[ 0.764414] NetLabel: Initializing
[ 0.764415] NetLabel: domain hash size = 128
[ 0.764415] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.764427] NetLabel: unlabeled traffic allowed by default
[ 0.764431] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.764431] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.766788] clocksource: Switched to clocksource tsc-early
[ 0.776603] VFS: Disk quotas dquot_6.6.0
[ 0.776619] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.776640] *** VALIDATE hugetlbfs ***
[ 0.776674] pnp: PnP ACPI init
[ 0.776802] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.776803] system 00:00: [io 0xffff] has been reserved
[ 0.776804] system 00:00: [io 0xffff] has been reserved
[ 0.776806] system 00:00: [io 0xffff] has been reserved
[ 0.776807] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.776808] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 0.776809] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.776813] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.776867] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.776870] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.776890] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.776941] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.776944] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.776994] pnp 00:04: Plug and Play ACPI device, IDs SYN2b34 SYN2b00 SYN0002 PNP0f13 (active)
[ 0.777061] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.829557] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.829559] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.829560] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.829561] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.829562] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.829563] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.829564] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.829566] system 00:06: [mem 0xff000000-0xff000fff] has been reserved
[ 0.829567] system 00:06: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.829568] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.829569] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.829570] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.829573] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.830100] pnp: PnP ACPI: found 7 devices
[ 0.835692] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.835696] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.835701] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 0.835703] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[ 0.835704] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
[ 0.835711] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
[ 0.835714] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.835716] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.835719] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 0.835720] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.835722] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.835725] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.835726] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.835730] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.835732] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.835736] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff]
[ 0.835739] pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.835745] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.835747] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.835751] pci 0000:00:1c.1: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.835758] pci 0000:00:1c.2: PCI bridge to [bus 09]
[ 0.835761] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.835765] pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.835772] pci 0000:00:1c.4: PCI bridge to [bus 0a]
[ 0.835776] pci 0000:00:1c.4: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.835783] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.835784] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.835785] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.835786] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[ 0.835787] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.835788] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
[ 0.835789] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.835790] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.835791] pci_bus 0000:07: resource 1 [mem 0x9fb00000-0x9fcfffff]
[ 0.835792] pci_bus 0000:07: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.835793] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.835794] pci_bus 0000:08: resource 1 [mem 0xd1600000-0xd16fffff]
[ 0.835795] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
[ 0.835796] pci_bus 0000:09: resource 1 [mem 0xd1500000-0xd15fffff]
[ 0.835797] pci_bus 0000:0a: resource 1 [mem 0xd1400000-0xd14fffff]
[ 0.835924] NET: Registered protocol family 2
[ 0.836081] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.836131] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.836279] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.836387] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.836426] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.836465] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.836539] NET: Registered protocol family 1
[ 0.836543] NET: Registered protocol family 44
[ 0.836554] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 2.503455] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.503648] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x65a took 1626646 usecs
[ 4.170121] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 4.170318] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x65a took 1627585 usecs
[ 4.170358] PCI: CLS 64 bytes, default 64
[ 4.170388] Unpacking initramfs...
[ 4.295768] Freeing initrd memory: 9044K
[ 4.330140] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.330141] software IO TLB: mapped [mem 0x98abf000-0x9cabf000] (64MB)
[ 4.330305] check: Scanning for low memory corruption every 60 seconds
[ 4.330842] Initialise system trusted keyrings
[ 4.330851] Key type blacklist registered
[ 4.330896] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 4.332027] zbud: loaded
[ 4.371477] Key type asymmetric registered
[ 4.371478] Asymmetric key parser 'x509' registered
[ 4.371490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 4.371525] io scheduler mq-deadline registered
[ 4.371526] io scheduler kyber registered
[ 4.371573] io scheduler bfq registered
[ 4.372525] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.372596] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 4.372596] vesafb: scrolling: redraw
[ 4.372598] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 4.372611] vesafb: framebuffer at 0xc0000000, mapped to 0x00000000423703b6, using 8128k, total 8128k
[ 4.372685] Console: switching to colour frame buffer device 240x67
[ 4.536571] fb0: VESA VGA frame buffer device
[ 4.536586] intel_idle: MWAIT substates: 0x42120
[ 4.536587] intel_idle: v0.4.1 model 0x3C
[ 4.536946] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 4.536988] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 4.536996] ACPI: Power Button [PWRB]
[ 4.537024] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1
[ 4.537030] ACPI: Sleep Button [SLPB]
[ 4.537082] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.537087] ACPI: Lid Switch [LID0]
[ 4.537111] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.543467] ACPI: Power Button [PWRF]
[ 4.544585] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.544586] ACPI: Thermal Zone [TZ00] (59 C)
[ 4.544775] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.545862] usbcore: registered new interface driver usbserial_generic
[ 4.545866] usbserial: USB Serial support registered for generic
[ 4.545884] rtc_cmos 00:02: RTC can wake from S4
[ 4.546007] rtc_cmos 00:02: registered as rtc0
[ 4.546021] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.546064] intel_pstate: Intel P-state driver initializing
[ 4.546542] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.547111] NET: Registered protocol family 10
[ 4.562119] Segment Routing with IPv6
[ 4.562138] NET: Registered protocol family 17
[ 4.563084] mce: Using 9 MCE banks
[ 4.563096] RAS: Correctable Errors collector initialized.
[ 4.563132] microcode: sig=0x306c3, pf=0x20, revision=0x1c
[ 4.563256] microcode: Microcode Update Driver: v2.2.
[ 4.563265] sched_clock: Marking stable (4562974705, 277452)->(4674301358, -111049201)
[ 4.563590] registered taskstats version 1
[ 4.563596] Loading compiled-in X.509 certificates
[ 4.567026] Loaded X.509 cert 'Build time autogenerated kernel key: 0a97cc2c06968087dc07fff2dbe7c38f98cb7af1'
[ 4.567047] zswap: loaded using pool lzo/zbud
[ 4.572927] Key type big_key registered
[ 4.573527] PM: Magic number: 7:995:396
[ 4.573649] rtc_cmos 00:02: setting system clock to 2019-06-14T20:21:15 UTC (1560543675)
[ 4.575375] Freeing unused decrypted memory: 2040K
[ 4.575778] Freeing unused kernel image memory: 1564K
[ 4.596988] Write protecting the kernel read-only data: 18432k
[ 4.597763] Freeing unused kernel image memory: 2016K
[ 4.597966] Freeing unused kernel image memory: 328K
[ 4.610855] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.610857] x86/mm: Checking user space page tables
[ 4.620122] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.620123] Run /init as init process
[ 4.669683] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 4.674268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.693585] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.693615] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.694135] SCSI subsystem initialized
[ 4.694370] ehci-pci: EHCI PCI platform driver
[ 4.694562] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 4.694567] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.694580] ehci-pci 0000:00:1a.0: debug port 2
[ 4.698498] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 4.698512] ehci-pci 0000:00:1a.0: irq 21, io mem 0xd171d000
[ 4.700673] libata version 3.00 loaded.
[ 4.703043] ahci 0000:00:1f.2: version 3.0
[ 4.703165] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 4.703180] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x10 impl SATA mode
[ 4.703181] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 4.703444] scsi host0: ahci
[ 4.703602] scsi host1: ahci
[ 4.703681] scsi host2: ahci
[ 4.703745] scsi host3: ahci
[ 4.703805] scsi host4: ahci
[ 4.703840] ata1: DUMMY
[ 4.703841] ata2: DUMMY
[ 4.703841] ata3: DUMMY
[ 4.703842] ata4: DUMMY
[ 4.703844] ata5: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b300 irq 32
[ 4.706750] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.710112] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.710175] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[ 4.710177] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.710178] usb usb1: Product: EHCI Host Controller
[ 4.710179] usb usb1: Manufacturer: Linux 5.1.9-arch1-1-ARCH ehci_hcd
[ 4.710180] usb usb1: SerialNumber: 0000:00:1a.0
[ 4.710373] hub 1-0:1.0: USB hub found
[ 4.710378] hub 1-0:1.0: 2 ports detected
[ 4.710546] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.710551] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 4.711612] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 4.711617] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 4.711759] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[ 4.711760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.711761] usb usb2: Product: xHCI Host Controller
[ 4.711762] usb usb2: Manufacturer: Linux 5.1.9-arch1-1-ARCH xhci-hcd
[ 4.711763] usb usb2: SerialNumber: 0000:00:14.0
[ 4.711940] hub 2-0:1.0: USB hub found
[ 4.711958] hub 2-0:1.0: 14 ports detected
[ 4.714456] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.714459] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 4.714461] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 4.714462] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 4.714493] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[ 4.714494] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.714495] usb usb3: Product: xHCI Host Controller
[ 4.714496] usb usb3: Manufacturer: Linux 5.1.9-arch1-1-ARCH xhci-hcd
[ 4.714497] usb usb3: SerialNumber: 0000:00:14.0
[ 4.714620] hub 3-0:1.0: USB hub found
[ 4.714631] hub 3-0:1.0: 4 ports detected
[ 4.715020] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 4.715050] ehci-pci 0000:00:1d.0: debug port 2
[ 4.718973] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 4.718987] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd171c000
[ 4.730164] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.730223] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[ 4.730225] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.730226] usb usb4: Product: EHCI Host Controller
[ 4.730227] usb usb4: Manufacturer: Linux 5.1.9-arch1-1-ARCH ehci_hcd
[ 4.730228] usb usb4: SerialNumber: 0000:00:1d.0
[ 4.730429] hub 4-0:1.0: USB hub found
[ 4.730435] hub 4-0:1.0: 2 ports detected
[ 5.017545] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.018695] ata5.00: ATA-11: SanDisk SDSSDH31000G, X61170RL, max UDMA/133
[ 5.018698] ata5.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 5.020499] ata5.00: configured for UDMA/133
[ 5.031041] scsi 4:0:0:0: Direct-Access ATA SanDisk SDSSDH31 70RL PQ: 0 ANSI: 5
[ 5.038229] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5.038257] sd 4:0:0:0: [sda] Write Protect is off
[ 5.038261] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.038296] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.039144] sda: sda1 sda2 sda3
[ 5.039987] sd 4:0:0:0: [sda] Attached SCSI disk
[ 5.040129] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 5.046795] usb 2-6: new high-speed USB device number 2 using xhci_hcd
[ 5.060131] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 5.147500] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.169688] random: fast init done
[ 5.187156] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 5.187159] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.187511] hub 1-1:1.0: USB hub found
[ 5.187698] hub 1-1:1.0: 6 ports detected
[ 5.207226] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 5.207229] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.207770] hub 4-1:1.0: USB hub found
[ 5.207966] hub 4-1:1.0: 8 ports detected
[ 5.253715] usb 2-6: New USB device found, idVendor=5986, idProduct=055e, bcdDevice=36.51
[ 5.253718] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.253719] usb 2-6: Product: Lenovo EasyCamera
[ 5.253721] usb 2-6: Manufacturer: Generic
[ 5.253722] usb 2-6: SerialNumber: 200901010001
[ 5.302928] systemd[1]: systemd 242.29-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.316942] systemd[1]: Detected architecture x86-64.
[ 5.321233] systemd[1]: Set hostname to <ArcoLino>.
[ 5.343509] tsc: Refined TSC clocksource calibration: 2494.223 MHz
[ 5.343520] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e8602d1, max_idle_ns: 440795241926 ns
[ 5.343578] clocksource: Switched to clocksource tsc
[ 5.380133] usb 2-7: new full-speed USB device number 3 using xhci_hcd
[ 5.427618] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.427768] systemd[1]: Listening on Journal Socket.
[ 5.427845] systemd[1]: Listening on udev Kernel Socket.
[ 5.427921] systemd[1]: Listening on udev Control Socket.
[ 5.430154] systemd[1]: Starting udev Coldplug all Devices...
[ 5.430181] systemd[1]: Reached target Swap.
[ 5.431030] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.452112] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 5.456901] random: lvm: uninitialized urandom read (4 bytes read)
[ 5.461903] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 5.521367] usb 2-7: New USB device found, idVendor=0bda, idProduct=b728, bcdDevice= 2.00
[ 5.521369] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.521371] usb 2-7: Product: Bluetooth Radio
[ 5.521372] usb 2-7: Manufacturer: Realtek
[ 5.521373] usb 2-7: SerialNumber: 00e04c000001
[ 5.641091] audit: type=1130 audit(1560543676.563:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.643481] usb 2-9: new full-speed USB device number 4 using xhci_hcd
[ 5.647755] systemd-journald[310]: Received request to flush runtime journal from PID 1
[ 5.705549] audit: type=1130 audit(1560543676.626:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.749062] ACPI: AC Adapter [ACAD] (on-line)
[ 5.752110] EDAC ie31200: No ECC support
[ 5.752578] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 5.752580] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 5.752581] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 5.752582] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 5.784533] usb 2-9: New USB device found, idVendor=046d, idProduct=c084, bcdDevice= 7.03
[ 5.784535] usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.784536] usb 2-9: Product: G203 Prodigy Gaming Mouse
[ 5.784537] usb 2-9: Manufacturer: Logitech
[ 5.784538] usb 2-9: SerialNumber: 0B85364F3837
[ 5.802051] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190215/utaddress-213)
[ 5.802056] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.802059] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190215/utaddress-213)
[ 5.802062] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190215/utaddress-213)
[ 5.802065] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.802066] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190215/utaddress-213)
[ 5.802068] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190215/utaddress-213)
[ 5.802070] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.802071] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190215/utaddress-213)
[ 5.802074] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190215/utaddress-213)
[ 5.802076] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20190215/utaddress-213)
[ 5.802078] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.802079] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.802729] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 5.802760] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.803895] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.812978] iTCO_vendor_support: vendor-support=0
[ 5.813626] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 5.813627] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.813628] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.813629] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.813629] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.828980] media: Linux media interface: v0.10
[ 5.830220] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.831669] Linux agpgart interface v0.103
[ 5.835129] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.835176] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 5.835178] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.835274] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.843526] cryptd: max_cpu_qlen set to 1000
[ 5.845423] intel-spi intel-spi: gd25q64 (8192 Kbytes)
[ 5.850739] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 5.852489] audit: type=1130 audit(1560543676.773:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.866861] libphy: r8169: probed
[ 5.867289] r8169 0000:09:00.0 eth0: RTL8168g/8111g, f8:a9:63:33:1f:ac, XID 509, IRQ 35
[ 5.867291] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.869310] r8169 0000:09:00.0 enp9s0: renamed from eth0
[ 5.876396] AVX2 version of gcm_enc/dec engaged.
[ 5.876398] AES CTR mode by8 optimization enabled
[ 5.882408] videodev: Linux video capture interface: v2.00
[ 5.882628] Creating 1 MTD partitions on "intel-spi":
[ 5.882631] 0x000000000000-0x000000800000 : "BIOS"
[ 5.883668] usbcore: registered new interface driver usbhid
[ 5.883669] usbhid: USB HID core driver
[ 5.888868] input: Logitech G203 Prodigy Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/0003:046D:C084.0001/input/input8
[ 5.891019] hid-generic 0003:046D:C084.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G203 Prodigy Gaming Mouse] on usb-0000:00:14.0-9/input0
[ 5.891454] input: Logitech G203 Prodigy Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C084.0002/input/input9
[ 5.921193] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:055e)
[ 5.921380] audit: type=1130 audit(1560543676.843:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.926796] Bluetooth: Core ver 2.22
[ 5.926811] NET: Registered protocol family 31
[ 5.926812] Bluetooth: HCI device and connection manager initialized
[ 5.926815] Bluetooth: HCI socket layer initialized
[ 5.926817] Bluetooth: L2CAP socket layer initialized
[ 5.926820] Bluetooth: SCO socket layer initialized
[ 5.930919] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.930921] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.930922] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.930967] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input14
[ 5.939593] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.944414] audit: type=1130 audit(1560543676.866:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.946680] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3239: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 5.946682] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.946683] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 5.946684] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 5.946685] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 5.946686] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 5.946687] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 5.946688] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 5.946863] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.946891] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.946892] cfg80211: failed to load regulatory.db
[ 5.947828] input: Logitech G203 Prodigy Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C084.0002/input/input10
[ 5.948189] input: Logitech G203 Prodigy Gaming Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C084.0002/input/input11
[ 5.950979] audit: type=1127 audit(1560543676.873:7): pid=461 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 5.953689] hid-generic 0003:046D:C084.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G203 Prodigy Gaming Mouse] on usb-0000:00:14.0-9/input1
[ 5.953955] usbcore: registered new interface driver uvcvideo
[ 5.953957] USB Video Class driver (1.1.1)
[ 5.954200] audit: type=1130 audit(1560543676.876:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.957169] audit: type=1130 audit(1560543676.879:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bumblebeed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.959778] audit: type=1130 audit(1560543676.879:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.960297] usbcore: registered new interface driver btusb
[ 5.964334] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 5.965325] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 5.965327] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 5.967311] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_config.bin
[ 5.967326] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 5.967331] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[ 5.970478] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 5.980585] mousedev: PS/2 mouse device common for all mice
[ 5.993832] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 5.993891] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 5.993934] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 6.004322] audit: type=1130 audit(1560543676.926:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.046823] ideapad_laptop: timeout in read_ec_data
[ 6.046892] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input18
[ 6.106454] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[ 6.106457] fb0: switching to inteldrmfb from VESA VGA
[ 6.106474] Console: switching to colour dummy device 80x25
[ 6.106559] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 6.109157] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.109158] [drm] Driver supports precise vblank timestamp query.
[ 6.109805] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.118411] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[ 6.130243] [drm] Initialized i915 1.6.0 20190207 for 0000:00:02.0 on minor 0
[ 6.131406] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 6.134770] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 6.135774] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:43/LNXVIDEO:00/input/input19
[ 6.143891] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.144647] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20
[ 6.144783] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.147395] fbcon: inteldrmfb (fb0) is primary device
[ 6.153262] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 6.153577] rtlwifi: rtlwifi: wireless switch is on
[ 6.160451] rtl8723be 0000:08:00.0 wlp8s0: renamed from wlan0
[ 6.186055] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4678]
[ 6.188353] intel_rapl: Found RAPL domain package
[ 6.188354] intel_rapl: Found RAPL domain core
[ 6.188355] intel_rapl: Found RAPL domain uncore
[ 6.188356] intel_rapl: Found RAPL domain dram
[ 6.188358] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 6.215748] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1228..]
[ 6.215752] psmouse serio1: synaptics: Your touchpad (PNP: SYN2b34 SYN2b00 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 6.273366] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x127c00/0x0, board id: 2334, fw id: 1588229
[ 6.309410] random: crng init done
[ 6.309411] random: 2 urandom warning(s) missed due to ratelimiting
[ 6.310123] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 6.481934] Generic Realtek PHY r8169-900:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-900:00, irq=IGNORE)
[ 6.602668] r8169 0000:09:00.0 enp9s0: Link is Down
[ 7.364817] Console: switching to colour frame buffer device 240x67
[ 7.386343] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.423887] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 7.423952] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 7.423997] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 7.424047] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[ 7.424096] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[ 8.517217] IPMI message handler: version 39.2
[ 8.519158] ipmi device interface
[ 8.633707] nvidia: loading out-of-tree module taints kernel.
[ 8.633713] nvidia: module license 'NVIDIA' taints kernel.
[ 8.633714] Disabling lock debugging due to kernel taint
[ 8.637660] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 8.645863] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[ 8.646152] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 8.646205] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PEG0._PRT.AR02], AE_NOT_FOUND (20190215/psargs-330)
[ 8.646209] ACPI Error: Aborting method \_SB.PCI0.PEG0._PRT due to previous error (AE_NOT_FOUND) (20190215/psparse-531)
[ 8.746563] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 430.26 Tue Jun 4 17:40:52 CDT 2019
[ 8.781897] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190215/nsarguments-66)
[ 10.552706] fuse init (API version 7.29)
[ 11.480949] kauditd_printk_skb: 13 callbacks suppressed
[ 11.480949] audit: type=1131 audit(1560543682.403:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.537658] audit: type=1006 audit(1560543683.459:26): pid=631 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 12.553776] audit: type=1130 audit(1560543683.476:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.558654] audit: type=1006 audit(1560543683.479:28): pid=637 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 12.587555] audit: type=1130 audit(1560543683.509:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.596778] audit: type=1112 audit(1560543683.516:30): pid=631 uid=0 auid=1000 ses=2 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=ArcoLino addr=? terminal=/dev/tty7 res=success'
[ 13.038592] audit: type=1130 audit(1560543683.959:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.050999] audit: type=1130 audit(1560543683.973:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.438426] audit: type=1130 audit(1560543684.359:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.049270] wlp8s0: authenticate with 08:6a:0a:91:81:1a
[ 14.067286] wlp8s0: send auth to 08:6a:0a:91:81:1a (try 1/3)
[ 14.074390] wlp8s0: authenticated
[ 14.076819] wlp8s0: associate with 08:6a:0a:91:81:1a (try 1/3)
[ 14.080681] wlp8s0: RX AssocResp from 08:6a:0a:91:81:1a (capab=0x411 status=0 aid=1)
[ 14.080913] wlp8s0: associated
[ 14.122134] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[ 17.004591] audit: type=1131 audit(1560543687.926:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.800609] audit: type=1131 audit(1560543693.723:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.808675] audit: type=1131 audit(1560543693.729:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 77.691885] audit: type=1131 audit(1560543748.613:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 932.491893] audit: type=1130 audit(1560544603.413:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 932.491898] audit: type=1131 audit(1560544603.413:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5365.382418] audit: type=1130 audit(1560549036.306:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5395.430652] audit: type=1131 audit(1560549066.353:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5404.383552] audit: type=1130 audit(1560549075.306:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5434.431246] audit: type=1131 audit(1560549105.353:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'Offline
#6 2019-06-14 21:05:29
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,506
Re: Bad Visualization of desktop enviroment
From the optimus log duration it doesn't seem as if you're running the session on the nvidia chip and it's also 3 days old, so I assume the presence of an optimus client isn't relevant?
Try the xf86-video-intel driver along https://wiki.archlinux.org/index.php/In … cs#Tearing
You also didn't elaborate on the nature of the tearing or the behavior on other DEs/compositors or the configuration, esp. because of https://wiki.archlinux.org/index.php/MA … ompositing
Online
Pages: 1