You are not logged in.

#1 2019-06-22 18:28:09

zaxdan69
Member
Registered: 2016-06-04
Posts: 271

[SOLVED]Cannot change dual monitor positions via 10-monitor.conf

I have 2 monitors and I cannot change the positions(primary monitor is left of secondary) which are opposite both on lightdm and i3 wm.
Using xrandr I can change the positions but I have problems to set the 10-monitor.conf in xorg.conf.d directory.
Using xrandr's infos like this:

                                        /etc/X11/xorg.conf.d/10-monitor.conf                                                  
Section "Monitor"
    Identifier  "DVI-D-1"
    Option "primary" "true"
EndSection

Section "Monitor"
    Identifier  "HDMI-1"
    Option "RightOf" "DVI-D-1"
EndSection

as I found in wiki, doesn't work and xserver crash. I tried some different approaches I found on other threads, but nothing worked.
I found a monitors.xml file in .config and there the names for the monitors are different from these that xrandr provides. So, the names from xrandr don't work and for this xserver crash.
So, I changed like this:

                                        /etc/X11/xorg.conf.d/10-monitor.conf                                                  
Section "Monitor"
    Identifier  "DVI-I-0"
    Option "primary" "true"
EndSection

Section "Monitor"
    Identifier  "VGA-0"
    Option "RightOf" "DVI-I-1"
EndSection

and with these identifiers xserver doesn't crash, but it doesn't also. The positions don't change and still are opposite.
If I use "LeftOf"(just for testing) then xserver crash again.
Any help?

Last edited by zaxdan69 (2019-06-23 17:18:42)

Offline

#2 2019-06-22 21:05:22

seth
Member
Registered: 2012-09-03
Posts: 50,000

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

Please post the output of xrandr and the xorg log from the crashing X11 server (probably *.old if you started another one)
Notice that lightdm might feel inclined to change the randr config, maybe see https://wiki.archlinux.org/index.php/Li … ng_monitor (oc. use the approapriate xrandr call for your situation)

Online

#3 2019-06-23 05:15:50

zaxdan69
Member
Registered: 2016-06-04
Posts: 271

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

output of xrandr -q:

Screen 0: minimum 320 x 200, current 2720 x 1024, maximum 16384 x 16384
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 256mm
   1440x900      59.89*+  74.98  
   1920x1080     60.00    59.94  
   1680x1050     59.88  
   1400x1050     74.76    59.98  
   1600x900      59.82  
   1280x1024     75.02    60.02  
   1400x900      59.96    59.88  
   1280x960      60.00  
   1440x810      60.00    59.97  
   1368x768      59.88    59.85  
   1280x800      59.99    59.97    59.89    59.81    59.91  
   1152x864      75.00  
   1280x720      60.00    59.99    59.86    60.00    59.94    59.74  
   1024x768      75.05    60.04    75.03    70.07    60.00  
   960x720       75.00    60.00  
   928x696       75.00    60.05  
   896x672       75.05    60.01  
   1024x576      59.95    59.96    59.90    59.82  
   960x600       59.93    60.00  
   832x624       74.55  
   960x540       59.96    59.99    59.63    59.82  
   800x600       75.00    70.00    65.00    60.00    72.19    75.00    60.32    56.25  
   840x525       60.01    59.88  
   864x486       59.92    59.57  
   700x525       74.76    59.98  
   800x450       59.95    59.82  
   720x480       60.00    59.94    59.94  
   640x512       75.02    60.02  
   700x450       59.96    59.88  
   640x480       60.00    75.00    72.81    75.00    66.67    60.00    59.94  
   720x405       59.51    58.99  
   720x400       70.08  
   684x384       59.88    59.85  
   640x400       59.88    59.98  
   576x432       75.00  
   640x360       59.86    59.83    59.84    59.32  
   512x384       75.03    70.07    60.00  
   512x288       60.00    59.92  
   416x312       74.66  
   480x270       59.63    59.82  
   400x300       72.19    75.12    60.32    56.34  
   432x243       59.92    59.57  
   320x240       72.81    75.00    60.05  
   360x202       59.51    59.13  
   320x180       59.84    59.32  
DVI-D-1 connected primary 1280x1024+1440+0 (normal left inverted right x axis y axis) 340mm x 270mm
   1280x1024     75.02*+  60.02  
   1280x960      60.00  
   1280x800      75.02    59.97    59.81    59.91  
   1152x864      75.00  
   1280x720      75.02    59.99    59.86    59.74  
   1024x768      60.04    75.03    70.07    60.00  
   960x720       60.00  
   928x696       75.00    60.05  
   896x672       75.05    60.01  
   1024x576      59.95    59.96    59.90    59.82  
   960x600       59.93    60.00  
   832x624       74.55  
   960x540       59.96    59.99    59.63    59.82  
   800x600       75.00    70.00    65.00    60.00    72.19    75.00    60.32    56.25  
   840x525       60.01    59.88  
   864x486       59.92    59.57  
   700x525       74.76    59.98  
   800x450       59.95    59.82  
   640x512       75.02    60.02  
   700x450       59.96    59.88  
   640x480       60.00    75.00    72.81    75.00    66.67    59.94  
   720x405       59.51    58.99  
   720x400       70.08  
   684x384       59.88    59.85  
   640x400       59.88    59.98  
   576x432       75.00  
   640x360       59.86    59.83    59.84    59.32  
   512x384       75.03    70.07    60.00  
   512x288       60.00    59.92  
   416x312       74.66  
   480x270       59.63    59.82  
   400x300       72.19    75.12    60.32    56.34  
   432x243       59.92    59.57  
   320x240       72.81    75.00    60.05  
   360x202       59.51    59.13  
   320x180       59.84    59.32  

this is the xorg.0.log when I use 10-monitors.conf file and cannot start xserver:

[   912.170] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[   912.170] Build Operating System: Linux Arch Linux
[   912.170] Current Operating System: Linux arch-desktop 5.1.12-arch1-1-ARCH #1 SMP PREEMPT Wed Jun 19 09:16:00 UTC 2019 x86_64
[   912.170] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d28d2d85-0c43-4d25-925d-a189c5d957ed rw sysrq_always_enabled=1 fbcon=scrollback:128k
[   912.170] Build Date: 30 May 2019  06:44:40PM
[   912.170]  
[   912.170] Current version of pixman: 0.38.4
[   912.170] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   912.170] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   912.170] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 23 06:27:15 2019
[   912.170] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   912.170] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   912.170] (==) No Layout section.  Using the first Screen section.
[   912.170] (==) No screen section available. Using defaults.
[   912.170] (**) |-->Screen "Default Screen Section" (0)
[   912.170] (**) |   |-->Monitor "<default monitor>"
[   912.171] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   912.171] (==) Automatically adding devices
[   912.171] (==) Automatically enabling devices
[   912.171] (==) Automatically adding GPU devices
[   912.171] (==) Automatically binding GPU devices
[   912.171] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   912.171] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   912.171] 	Entry deleted from font path.
[   912.171] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[   912.171] 	Entry deleted from font path.
[   912.171] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[   912.171] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi
[   912.171] (==) ModulePath set to "/usr/lib/xorg/modules"
[   912.171] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   912.171] (II) Module ABI versions:
[   912.171] 	X.Org ANSI C Emulation: 0.4
[   912.171] 	X.Org Video Driver: 24.0
[   912.171] 	X.Org XInput driver : 24.1
[   912.171] 	X.Org Server Extension : 10.0
[   912.172] (++) using VT number 7

[   912.172] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   912.172] (II) xfree86: Adding drm device (/dev/dri/card0)
[   912.177] (--) PCI:*(1@0:0:0) 1002:67df:1da2:e343 rev 239, Mem @ 0xd0000000/268435456, 0xcfe00000/2097152, 0xfe9c0000/262144, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[   912.177] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   912.177] (II) LoadModule: "glx"
[   912.177] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   912.179] (II) Module glx: vendor="X.Org Foundation"
[   912.179] 	compiled for 1.20.5, module version = 1.0.0
[   912.179] 	ABI class: X.Org Server Extension, version 10.0
[   912.179] (==) Matched ati as autoconfigured driver 0
[   912.179] (==) Matched modesetting as autoconfigured driver 1
[   912.179] (==) Matched fbdev as autoconfigured driver 2
[   912.179] (==) Matched vesa as autoconfigured driver 3
[   912.179] (==) Assigned the driver to the xf86ConfigLayout
[   912.179] (II) LoadModule: "ati"
[   912.179] (WW) Warning, couldn't open module ati
[   912.179] (EE) Failed to load module "ati" (module does not exist, 0)
[   912.179] (II) LoadModule: "modesetting"
[   912.179] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   912.180] (II) Module modesetting: vendor="X.Org Foundation"
[   912.180] 	compiled for 1.20.5, module version = 1.20.5
[   912.180] 	Module class: X.Org Video Driver
[   912.180] 	ABI class: X.Org Video Driver, version 24.0
[   912.180] (II) LoadModule: "fbdev"
[   912.180] (WW) Warning, couldn't open module fbdev
[   912.180] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   912.180] (II) LoadModule: "vesa"
[   912.180] (WW) Warning, couldn't open module vesa
[   912.180] (EE) Failed to load module "vesa" (module does not exist, 0)
[   912.180] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   912.181] (II) modeset(0): using drv /dev/dri/card0
[   912.182] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   912.182] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   912.182] (==) modeset(0): RGB weight 888
[   912.182] (==) modeset(0): Default visual is TrueColor
[   912.182] (II) Loading sub module "glamoregl"
[   912.182] (II) LoadModule: "glamoregl"
[   912.182] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   912.186] (II) Module glamoregl: vendor="X.Org Foundation"
[   912.186] 	compiled for 1.20.5, module version = 1.0.1
[   912.186] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   912.293] (II) modeset(0): glamor X acceleration enabled on Radeon RX 570 Series (POLARIS10, DRM 3.30.0, 5.1.12-arch1-1-ARCH, LLVM 8.0.0)
[   912.293] (II) modeset(0): glamor initialized
[   912.293] (II) modeset(0): Output DP-1 has no monitor section
[   912.294] (II) modeset(0): Output HDMI-1 using monitor section HDMI-1
[   912.294] (**) modeset(0): Option "LeftOf" "DVI-D-1"
[   912.294] (II) modeset(0): Output DVI-D-1 using monitor section DVI-D-1
[   912.294] (**) modeset(0): Option "Primary" "true"
[   912.295] (II) modeset(0): EDID for output DVI-D-1
[   912.295] (II) modeset(0): Manufacturer: AOC  Model: a728  Serial#: 25997
[   912.295] (II) modeset(0): Year: 2006  Week: 6
[   912.295] (II) modeset(0): EDID Version: 1.3
[   912.295] (II) modeset(0): Digital Display Input
[   912.295] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[   912.295] (II) modeset(0): Gamma: 2.20
[   912.295] (II) modeset(0): DPMS capabilities: Off
[   912.295] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   912.295] (II) modeset(0): First detailed timing is preferred mode
[   912.295] (II) modeset(0): redX: 0.640 redY: 0.340   greenX: 0.289 greenY: 0.609
[   912.295] (II) modeset(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.329
[   912.295] (II) modeset(0): Supported established timings:
[   912.295] (II) modeset(0): 720x400@70Hz
[   912.295] (II) modeset(0): 640x480@60Hz
[   912.295] (II) modeset(0): 640x480@67Hz
[   912.295] (II) modeset(0): 640x480@72Hz
[   912.295] (II) modeset(0): 640x480@75Hz
[   912.295] (II) modeset(0): 800x600@56Hz
[   912.295] (II) modeset(0): 800x600@60Hz
[   912.295] (II) modeset(0): 800x600@72Hz
[   912.295] (II) modeset(0): 800x600@75Hz
[   912.295] (II) modeset(0): 832x624@75Hz
[   912.295] (II) modeset(0): 1024x768@60Hz
[   912.295] (II) modeset(0): 1024x768@70Hz
[   912.295] (II) modeset(0): 1024x768@75Hz
[   912.295] (II) modeset(0): 1280x1024@75Hz
[   912.295] (II) modeset(0): Manufacturer's mask: 0
[   912.295] (II) modeset(0): Supported standard timings:
[   912.295] (II) modeset(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   912.295] (II) modeset(0): Supported detailed timing:
[   912.295] (II) modeset(0): clock: 135.0 MHz   Image Size:  340 x 270 mm
[   912.295] (II) modeset(0): h_active: 1280  h_sync: 1296  h_sync_end 1440 h_blank_end 1688 h_border: 0
[   912.295] (II) modeset(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[   912.295] (II) modeset(0): Serial No: 29262JA025997
[   912.295] (II) modeset(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[   912.295] (II) modeset(0): Monitor name: LM728
[   912.295] (II) modeset(0): EDID (in hex):
[   912.295] (II) modeset(0): 	00ffffffffffff0005e328a78d650000
[   912.295] (II) modeset(0): 	0610010380221b782ac0f5a3574a9c23
[   912.295] (II) modeset(0): 	114f54bfef0081800101010101010101
[   912.295] (II) modeset(0): 	010101010101bc34009851002a401090
[   912.295] (II) modeset(0): 	1300540e1100001e000000ff00323932
[   912.295] (II) modeset(0): 	36324a41303235393937000000fd0037
[   912.295] (II) modeset(0): 	4b1e530e000a202020202020000000fc
[   912.295] (II) modeset(0): 	004c4d3732380a20202020202020007d
[   912.296] (II) modeset(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[   912.296] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[   912.296] (II) modeset(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
[   912.296] (II) modeset(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
[   912.296] (II) modeset(0): Printing probed modes for output DVI-D-1
[   912.296] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)
[   912.296] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   912.296] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   912.296] (II) modeset(0): Modeline "1280x800"x75.0  135.00  1280 1296 1440 1688  800 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   912.296] (II) modeset(0): Modeline "1280x800"x60.0  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[   912.296] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[   912.296] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[   912.296] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz d)
[   912.296] (II) modeset(0): Modeline "1280x720"x75.0  135.00  1280 1296 1440 1688  720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   912.296] (II) modeset(0): Modeline "1280x720"x60.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[   912.296] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[   912.296] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[   912.296] (II) modeset(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   912.296] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   912.296] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   912.296] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   912.296] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   912.296] (II) modeset(0): Modeline "928x696"x75.0  144.00  928 992 1104 1280  696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[   912.296] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   912.296] (II) modeset(0): Modeline "896x672"x75.0  130.50  896 944 1052 1228  672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[   912.296] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   912.296] (II) modeset(0): Modeline "1024x576"x60.0   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[   912.296] (II) modeset(0): Modeline "1024x576"x60.0   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[   912.296] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[   912.296] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[   912.296] (II) modeset(0): Modeline "960x600"x59.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[   912.296] (II) modeset(0): Modeline "960x600"x60.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   912.296] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   912.296] (II) modeset(0): Modeline "960x540"x60.0   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[   912.296] (II) modeset(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   912.296] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[   912.296] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[   912.296] (II) modeset(0): Modeline "800x600"x75.0  101.25  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[   912.296] (II) modeset(0): Modeline "800x600"x70.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[   912.296] (II) modeset(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[   912.296] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   912.296] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   912.296] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   912.296] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   912.296] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   912.296] (II) modeset(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   912.296] (II) modeset(0): Modeline "840x525"x59.9   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   912.296] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[   912.296] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[   912.296] (II) modeset(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[   912.296] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   912.296] (II) modeset(0): Modeline "800x450"x59.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[   912.296] (II) modeset(0): Modeline "800x450"x59.8   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[   912.296] (II) modeset(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[   912.296] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   912.296] (II) modeset(0): Modeline "700x450"x60.0   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[   912.296] (II) modeset(0): Modeline "700x450"x59.9   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[   912.296] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   912.296] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   912.296] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   912.296] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz d)
[   912.296] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   912.296] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   912.296] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[   912.296] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[   912.296] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   912.296] (II) modeset(0): Modeline "684x384"x59.9   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[   912.296] (II) modeset(0): Modeline "684x384"x59.9   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[   912.296] (II) modeset(0): Modeline "640x400"x59.9   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[   912.296] (II) modeset(0): Modeline "640x400"x60.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[   912.296] (II) modeset(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[   912.296] (II) modeset(0): Modeline "640x360"x59.9   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[   912.296] (II) modeset(0): Modeline "640x360"x59.8   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[   912.296] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[   912.296] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[   912.296] (II) modeset(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[   912.296] (II) modeset(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[   912.296] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   912.296] (II) modeset(0): Modeline "512x288"x60.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[   912.296] (II) modeset(0): Modeline "512x288"x59.9   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[   912.296] (II) modeset(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[   912.296] (II) modeset(0): Modeline "480x270"x59.6   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[   912.296] (II) modeset(0): Modeline "480x270"x59.8   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[   912.296] (II) modeset(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[   912.296] (II) modeset(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[   912.296] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   912.296] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   912.296] (II) modeset(0): Modeline "432x243"x59.9   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[   912.296] (II) modeset(0): Modeline "432x243"x59.6   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[   912.296] (II) modeset(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[   912.296] (II) modeset(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[   912.296] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   912.296] (II) modeset(0): Modeline "360x202"x59.5   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[   912.296] (II) modeset(0): Modeline "360x202"x59.1   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[   912.296] (II) modeset(0): Modeline "320x180"x59.8    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[   912.296] (II) modeset(0): Modeline "320x180"x59.3    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[   912.296] (II) modeset(0): EDID for output DP-1
[   912.297] (II) modeset(0): EDID for output HDMI-1
[   912.297] (II) modeset(0): Manufacturer: GSM  Model: 4b32  Serial#: 69271
[   912.297] (II) modeset(0): Year: 2007  Week: 50
[   912.297] (II) modeset(0): EDID Version: 1.3
[   912.297] (II) modeset(0): Digital Display Input
[   912.297] (II) modeset(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[   912.297] (II) modeset(0): Gamma: 2.20
[   912.297] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[   912.297] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   912.297] (II) modeset(0): First detailed timing is preferred mode
[   912.297] (II) modeset(0): redX: 0.640 redY: 0.334   greenX: 0.286 greenY: 0.599
[   912.297] (II) modeset(0): blueX: 0.154 blueY: 0.077   whiteX: 0.313 whiteY: 0.329
[   912.297] (II) modeset(0): Supported established timings:
[   912.297] (II) modeset(0): 720x400@70Hz
[   912.297] (II) modeset(0): 640x480@60Hz
[   912.297] (II) modeset(0): 640x480@67Hz
[   912.297] (II) modeset(0): 640x480@72Hz
[   912.297] (II) modeset(0): 640x480@75Hz
[   912.297] (II) modeset(0): 800x600@56Hz
[   912.297] (II) modeset(0): 800x600@60Hz
[   912.297] (II) modeset(0): 800x600@72Hz
[   912.297] (II) modeset(0): 800x600@75Hz
[   912.297] (II) modeset(0): 832x624@75Hz
[   912.297] (II) modeset(0): 1024x768@60Hz
[   912.297] (II) modeset(0): 1024x768@70Hz
[   912.297] (II) modeset(0): 1024x768@75Hz
[   912.297] (II) modeset(0): 1280x1024@75Hz
[   912.297] (II) modeset(0): 1152x864@75Hz
[   912.297] (II) modeset(0): Manufacturer's mask: 0
[   912.297] (II) modeset(0): Supported standard timings:
[   912.297] (II) modeset(0): #0: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[   912.297] (II) modeset(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
[   912.297] (II) modeset(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
[   912.297] (II) modeset(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   912.297] (II) modeset(0): Supported detailed timing:
[   912.297] (II) modeset(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[   912.297] (II) modeset(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[   912.297] (II) modeset(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[   912.297] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[   912.297] (II) modeset(0): Monitor name: L192WS
[   912.297] (II) modeset(0): Monitor name: 
[   912.297] (II) modeset(0): Supported detailed timing:
[   912.297] (II) modeset(0): clock: 27.0 MHz   Image Size:  160 x 90 mm
[   912.297] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[   912.297] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[   912.297] (II) modeset(0): Number of EDID sections to follow: 1
[   912.297] (II) modeset(0): EDID (in hex):
[   912.297] (II) modeset(0): 	00ffffffffffff001e6d324b970e0100
[   912.297] (II) modeset(0): 	3211010380291a78eae5b5a355499927
[   912.297] (II) modeset(0): 	135054bfef80950f454f614f81800101
[   912.297] (II) modeset(0): 	0101010101019a29a0d0518422305098
[   912.297] (II) modeset(0): 	36009a001100001c000000fd00384b1e
[   912.297] (II) modeset(0): 	530e000a202020202020000000fc004c
[   912.297] (II) modeset(0): 	31393257530a202020202020000000fc
[   912.297] (II) modeset(0): 	00200a20202020202020202020200194
[   912.297] (II) modeset(0): 	02031b61230907078301000067030c00
[   912.297] (II) modeset(0): 	2000802d43908402e2000f8c0ad08a20
[   912.297] (II) modeset(0): 	e02d10103e9600a05a00000000000000
[   912.297] (II) modeset(0): 	00000000000000000000000000000000
[   912.297] (II) modeset(0): 	00000000000000000000000000000000
[   912.297] (II) modeset(0): 	00000000000000000000000000000000
[   912.297] (II) modeset(0): 	00000000000000000000000000000000
[   912.297] (II) modeset(0): 	00000000000000000000000000000029
[   912.297] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[   912.297] (II) modeset(0): Printing probed modes for output HDMI-1
[   912.297] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[   912.298] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   912.298] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[   912.298] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[   912.298] (II) modeset(0): Modeline "1400x1050"x74.8  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[   912.298] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   912.298] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[   912.298] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   912.298] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   912.298] (II) modeset(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[   912.298] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[   912.298] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[   912.298] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   912.298] (II) modeset(0): Modeline "1440x810"x60.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[   912.298] (II) modeset(0): Modeline "1440x810"x60.0  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[   912.298] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[   912.298] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[   912.298] (II) modeset(0): Modeline "1280x800"x60.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[   912.298] (II) modeset(0): Modeline "1280x800"x60.0  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[   912.298] (II) modeset(0): Modeline "1280x800"x59.9  106.50  1280 1520 1672 1904  800 903 909 934 -hsync +vsync (55.9 kHz e)
[   912.298] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[   912.298] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[   912.298] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   912.298] (II) modeset(0): Modeline "1280x720"x60.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[   912.298] (II) modeset(0): Modeline "1280x720"x60.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[   912.298] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[   912.298] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   912.298] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   912.298] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[   912.298] (II) modeset(0): Modeline "1024x768"x75.0  170.24  1024 1108 1220 1416  768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[   912.298] (II) modeset(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   912.298] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   912.298] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   912.298] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   912.298] (II) modeset(0): Modeline "960x720"x75.0  148.50  960 1032 1144 1320  720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[   912.298] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   912.298] (II) modeset(0): Modeline "928x696"x75.0  144.00  928 992 1104 1280  696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[   912.298] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   912.298] (II) modeset(0): Modeline "896x672"x75.0  130.50  896 944 1052 1228  672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[   912.298] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   912.298] (II) modeset(0): Modeline "1024x576"x60.0   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[   912.298] (II) modeset(0): Modeline "1024x576"x60.0   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[   912.298] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[   912.298] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[   912.298] (II) modeset(0): Modeline "960x600"x59.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[   912.298] (II) modeset(0): Modeline "960x600"x60.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   912.298] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   912.298] (II) modeset(0): Modeline "960x540"x60.0   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[   912.298] (II) modeset(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   912.298] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[   912.298] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[   912.298] (II) modeset(0): Modeline "800x600"x75.0  101.25  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[   912.298] (II) modeset(0): Modeline "800x600"x70.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[   912.298] (II) modeset(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[   912.298] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   912.298] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   912.298] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   912.298] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   912.298] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   912.298] (II) modeset(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   912.298] (II) modeset(0): Modeline "840x525"x59.9   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   912.298] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[   912.298] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[   912.298] (II) modeset(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[   912.298] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   912.298] (II) modeset(0): Modeline "800x450"x59.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[   912.298] (II) modeset(0): Modeline "800x450"x59.8   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[   912.298] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   912.298] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   912.298] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   912.298] (II) modeset(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[   912.298] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   912.298] (II) modeset(0): Modeline "700x450"x60.0   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[   912.298] (II) modeset(0): Modeline "700x450"x59.9   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[   912.298] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   912.298] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   912.298] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   912.298] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz d)
[   912.298] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   912.298] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   912.298] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   912.298] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[   912.298] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[   912.298] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   912.298] (II) modeset(0): Modeline "684x384"x59.9   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[   912.298] (II) modeset(0): Modeline "684x384"x59.9   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[   912.298] (II) modeset(0): Modeline "640x400"x59.9   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[   912.298] (II) modeset(0): Modeline "640x400"x60.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[   912.298] (II) modeset(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[   912.298] (II) modeset(0): Modeline "640x360"x59.9   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[   912.298] (II) modeset(0): Modeline "640x360"x59.8   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[   912.298] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[   912.298] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[   912.298] (II) modeset(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[   912.298] (II) modeset(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[   912.298] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   912.298] (II) modeset(0): Modeline "512x288"x60.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[   912.298] (II) modeset(0): Modeline "512x288"x59.9   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[   912.298] (II) modeset(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[   912.298] (II) modeset(0): Modeline "480x270"x59.6   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[   912.298] (II) modeset(0): Modeline "480x270"x59.8   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[   912.298] (II) modeset(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[   912.298] (II) modeset(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[   912.298] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   912.298] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   912.298] (II) modeset(0): Modeline "432x243"x59.9   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[   912.298] (II) modeset(0): Modeline "432x243"x59.6   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[   912.298] (II) modeset(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[   912.298] (II) modeset(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[   912.298] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   912.298] (II) modeset(0): Modeline "360x202"x59.5   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[   912.298] (II) modeset(0): Modeline "360x202"x59.1   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[   912.298] (II) modeset(0): Modeline "320x180"x59.8    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[   912.299] (II) modeset(0): Modeline "320x180"x59.3    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[   912.299] (II) modeset(0): Output DVI-D-1 connected
[   912.299] (II) modeset(0): Output DP-1 disconnected
[   912.299] (II) modeset(0): Output HDMI-1 connected
[   912.299] (II) modeset(0): Using user preference for initial modes
[   912.299] (II) modeset(0): Output DVI-D-1 using initial mode 1280x1024 +0+0
[   912.299] (II) modeset(0): Output HDMI-1 using initial mode 1280x1024 +0+0
[   912.299] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   912.299] (==) modeset(0): DPI set to (96, 96)
[   912.299] (II) Loading sub module "fb"
[   912.299] (II) LoadModule: "fb"
[   912.299] (II) Loading /usr/lib/xorg/modules/libfb.so
[   912.299] (II) Module fb: vendor="X.Org Foundation"
[   912.299] 	compiled for 1.20.5, module version = 1.0.0
[   912.299] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   912.301] (==) modeset(0): Backing store enabled
[   912.301] (==) modeset(0): Silken mouse disabled
[   912.302] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   912.302] (==) modeset(0): DPMS enabled
[   912.302] (II) modeset(0): [DRI2] Setup complete
[   912.302] (II) modeset(0): [DRI2]   DRI driver: radeonsi
[   912.302] (II) modeset(0): [DRI2]   VDPAU driver: radeonsi
[   912.302] (II) Initializing extension Generic Event Extension
[   912.302] (II) Initializing extension SHAPE
[   912.302] (II) Initializing extension MIT-SHM
[   912.302] (II) Initializing extension XInputExtension
[   912.303] (II) Initializing extension XTEST
[   912.303] (II) Initializing extension BIG-REQUESTS
[   912.303] (II) Initializing extension SYNC
[   912.303] (II) Initializing extension XKEYBOARD
[   912.303] (II) Initializing extension XC-MISC
[   912.303] (II) Initializing extension SECURITY
[   912.303] (II) Initializing extension XFIXES
[   912.303] (II) Initializing extension RENDER
[   912.304] (II) Initializing extension RANDR
[   912.304] (II) Initializing extension COMPOSITE
[   912.304] (II) Initializing extension DAMAGE
[   912.304] (II) Initializing extension MIT-SCREEN-SAVER
[   912.304] (II) Initializing extension DOUBLE-BUFFER
[   912.304] (II) Initializing extension RECORD
[   912.304] (II) Initializing extension DPMS
[   912.305] (II) Initializing extension Present
[   912.305] (II) Initializing extension DRI3
[   912.305] (II) Initializing extension X-Resource
[   912.305] (II) Initializing extension XVideo
[   912.305] (II) Initializing extension XVideo-MotionCompensation
[   912.305] (II) Initializing extension GLX
[   912.310] (II) AIGLX: Loaded and initialized radeonsi
[   912.310] (II) GLX: Initialized DRI2 GL provider for screen 0
[   912.310] (II) Initializing extension XFree86-VidModeExtension
[   912.310] (II) Initializing extension XFree86-DGA
[   912.310] (II) Initializing extension XFree86-DRI
[   912.310] (II) Initializing extension DRI2
[   912.311] (II) modeset(0): Damage tracking initialized
[   912.311] (II) modeset(0): Setting screen physical size to 677 x 270
[   912.377] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   912.377] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   912.377] (**) Power Button: Applying InputClass "system-keyboard"
[   912.377] (II) LoadModule: "libinput"
[   912.377] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   912.379] (II) Module libinput: vendor="X.Org Foundation"
[   912.379] 	compiled for 1.20.3, module version = 0.28.2
[   912.379] 	Module class: X.Org XInput Driver
[   912.379] 	ABI class: X.Org XInput driver, version 24.1
[   912.379] (II) Using input driver 'libinput' for 'Power Button'
[   912.379] (**) Power Button: always reports core events
[   912.379] (**) Option "Device" "/dev/input/event1"
[   912.379] (**) Option "_source" "server/udev"
[   912.381] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   912.381] (II) event1  - Power Button: device is a keyboard
[   912.381] (II) event1  - Power Button: device removed
[   912.409] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[   912.409] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   912.409] (**) Option "xkb_layout" "us,gr"
[   912.409] (**) Option "xkb_variant" ",extended"
[   912.445] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   912.445] (II) event1  - Power Button: device is a keyboard
[   912.446] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   912.446] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   912.446] (**) Power Button: Applying InputClass "system-keyboard"
[   912.446] (II) Using input driver 'libinput' for 'Power Button'
[   912.446] (**) Power Button: always reports core events
[   912.446] (**) Option "Device" "/dev/input/event0"
[   912.446] (**) Option "_source" "server/udev"
[   912.446] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   912.446] (II) event0  - Power Button: device is a keyboard
[   912.446] (II) event0  - Power Button: device removed
[   912.472] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   912.472] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   912.472] (**) Option "xkb_layout" "us,gr"
[   912.472] (**) Option "xkb_variant" ",extended"
[   912.474] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   912.474] (II) event0  - Power Button: device is a keyboard
[   912.475] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
[   912.475] (II) No input driver specified, ignoring this device.
[   912.475] (II) This device may have been added with another device file.
[   912.476] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event20)
[   912.476] (II) No input driver specified, ignoring this device.
[   912.476] (II) This device may have been added with another device file.
[   912.476] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event21)
[   912.476] (II) No input driver specified, ignoring this device.
[   912.476] (II) This device may have been added with another device file.
[   912.477] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event22)
[   912.477] (II) No input driver specified, ignoring this device.
[   912.477] (II) This device may have been added with another device file.
[   912.478] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event23)
[   912.478] (II) No input driver specified, ignoring this device.
[   912.478] (II) This device may have been added with another device file.
[   912.478] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event24)
[   912.478] (II) No input driver specified, ignoring this device.
[   912.478] (II) This device may have been added with another device file.
[   912.479] (II) config/udev: Adding input device HUION Huion Tablet Pen (/dev/input/event2)
[   912.480] (**) HUION Huion Tablet Pen: Applying InputClass "libinput tablet catchall"
[   912.480] (**) HUION Huion Tablet Pen: Applying InputClass "Tablet"
[   912.480] (II) LoadModule: "wacom"
[   912.480] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[   912.480] (II) Module wacom: vendor="X.Org Foundation"
[   912.480] 	compiled for 1.19.6, module version = 0.36.1
[   912.480] 	Module class: X.Org XInput Driver
[   912.480] 	ABI class: X.Org XInput driver, version 24.1
[   912.480] (II) Build version: 0.36.1
[   912.480] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
	Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
	Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
	Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
	CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
	CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
	Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
	PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
	DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452, DTH2452,
	Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18,
	Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3,
	PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5,
	Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19,
	Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13,
	Intuos4 12x19, Intuos4 WL USB Endpoint,
	Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
	Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
	Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
	Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
	Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, Cintiq 27QHDT,
	Cintiq 27QHDT, Mobilestudio Pro 13, MobileStudio Pro 16,
	MobileStudio Pro 13, MobileStudio Pro 16, Cintiq 13 FHD Pro,
	Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq 13 FHD Pro,
	Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq Pro 24,
	TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A,
	CapPlus  0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5,
	TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF,
	TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116,
	TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000,
	TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026,
	usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031,
	usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035,
	usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039,
	usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054,
	usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058,
	usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503,
	usb:1b96:0001, usb:17ef:6004
[   912.483] (II) Using input driver 'wacom' for 'HUION Huion Tablet Pen'
[   912.483] (**) HUION Huion Tablet Pen: always reports core events
[   912.483] (**) Option "Device" "/dev/input/event2"
[   912.538] (II) HUION Huion Tablet Pen: type not specified, assuming 'stylus'.
[   912.538] (II) HUION Huion Tablet Pen: other types will be automatically added.
[   912.538] (--) HUION Huion Tablet Pen stylus: using pressure threshold of 851 for button 1
[   912.539] (**) HUION Huion Tablet Pen stylus: panscroll is 0
[   912.539] (**) HUION Huion Tablet Pen stylus: panscroll modified to 2600
[   912.539] (--) HUION Huion Tablet Pen stylus: maxX=24384 maxY=15240 maxZ=8191 resX=200000 resY=200000  tilt=enabled
[   912.539] (II) HUION Huion Tablet Pen stylus: hotplugging dependent devices.
[   912.539] (EE) HUION Huion Tablet Pen stylus: Invalid type 'eraser' for this device.
[   912.539] (EE) HUION Huion Tablet Pen stylus: Invalid type 'cursor' for this device.
[   912.539] (EE) HUION Huion Tablet Pen stylus: Invalid type 'touch' for this device.
[   912.539] (EE) HUION Huion Tablet Pen stylus: Invalid type 'pad' for this device.
[   912.539] (II) HUION Huion Tablet Pen stylus: hotplugging completed.
[   912.605] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:09.0/0000:03:00.0/usb3/3-3/3-3:1.0/0003:256C:006E.0001/input/input3/event2"
[   912.605] (II) XINPUT: Adding extended input device "HUION Huion Tablet Pen stylus" (type: STYLUS, id 8)
[   912.606] (**) HUION Huion Tablet Pen stylus: (accel) keeping acceleration scheme 1
[   912.606] (**) HUION Huion Tablet Pen stylus: (accel) acceleration profile 0
[   912.606] (**) HUION Huion Tablet Pen stylus: (accel) acceleration factor: 2.000
[   912.606] (**) HUION Huion Tablet Pen stylus: (accel) acceleration threshold: 4
[   912.663] (II) config/udev: Adding input device HUION Huion Tablet Pen (/dev/input/mouse0)
[   912.663] (II) No input driver specified, ignoring this device.
[   912.663] (II) This device may have been added with another device file.
[   912.665] (II) config/udev: Adding input device HUION Huion Tablet Pad (/dev/input/event3)
[   912.665] (**) HUION Huion Tablet Pad: Applying InputClass "libinput tablet catchall"
[   912.665] (**) HUION Huion Tablet Pad: Applying InputClass "Tablet"
[   912.665] (II) Using input driver 'wacom' for 'HUION Huion Tablet Pad'
[   912.665] (**) HUION Huion Tablet Pad: always reports core events
[   912.665] (**) Option "Device" "/dev/input/event3"
[   912.665] (EE) HUION Huion Tablet Pad: Invalid type 'stylus' for this device.
[   912.665] (EE) HUION Huion Tablet Pad: Invalid type 'eraser' for this device.
[   912.665] (EE) HUION Huion Tablet Pad: Invalid type 'cursor' for this device.
[   912.665] (EE) HUION Huion Tablet Pad: Invalid type 'touch' for this device.
[   912.665] (II) HUION Huion Tablet Pad: type not specified, assuming 'pad'.
[   912.665] (II) HUION Huion Tablet Pad: other types will be automatically added.
[   912.665] (**) HUION Huion Tablet Pad pad: panscroll is 0
[   912.665] (**) HUION Huion Tablet Pad pad: panscroll modified to 13
[   912.665] (II) HUION Huion Tablet Pad pad: hotplugging dependent devices.
[   912.665] (EE) HUION Huion Tablet Pad pad: Invalid type 'stylus' for this device.
[   912.665] (EE) HUION Huion Tablet Pad pad: Invalid type 'eraser' for this device.
[   912.665] (EE) HUION Huion Tablet Pad pad: Invalid type 'cursor' for this device.
[   912.665] (EE) HUION Huion Tablet Pad pad: Invalid type 'touch' for this device.
[   912.665] (II) HUION Huion Tablet Pad pad: hotplugging completed.
[   912.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:09.0/0000:03:00.0/usb3/3-3/3-3:1.0/0003:256C:006E.0001/input/input4/event3"
[   912.728] (II) XINPUT: Adding extended input device "HUION Huion Tablet Pad pad" (type: PAD, id 9)
[   912.729] (**) HUION Huion Tablet Pad pad: (accel) keeping acceleration scheme 1
[   912.729] (**) HUION Huion Tablet Pad pad: (accel) acceleration profile 0
[   912.729] (**) HUION Huion Tablet Pad pad: (accel) acceleration factor: 2.000
[   912.729] (**) HUION Huion Tablet Pad pad: (accel) acceleration threshold: 4
[   912.729] (II) config/udev: Adding input device HUION Huion Tablet Pad (/dev/input/js0)
[   912.729] (II) No input driver specified, ignoring this device.
[   912.729] (II) This device may have been added with another device file.
[   912.730] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event4)
[   912.730] (**) SIGMACHIP Usb Mouse: Applying InputClass "libinput pointer catchall"
[   912.730] (**) SIGMACHIP Usb Mouse: Applying InputClass "My Mouse"
[   912.730] (II) Using input driver 'libinput' for 'SIGMACHIP Usb Mouse'
[   912.730] (**) SIGMACHIP Usb Mouse: always reports core events
[   912.730] (**) Option "Device" "/dev/input/event4"
[   912.730] (**) Option "_source" "server/udev"
[   912.786] (II) event4  - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse
[   912.786] (II) event4  - SIGMACHIP Usb Mouse: device is a pointer
[   912.786] (II) event4  - SIGMACHIP Usb Mouse: device removed
[   912.835] (**) Option "AccelSpeed" "-1"
[   912.835] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:1C4F:0051.0003/input/input6/event4"
[   912.835] (II) XINPUT: Adding extended input device "SIGMACHIP Usb Mouse" (type: MOUSE, id 10)
[   912.835] (**) Option "AccelerationScheme" "none"
[   912.835] (**) SIGMACHIP Usb Mouse: (accel) selected scheme none/0
[   912.835] (**) SIGMACHIP Usb Mouse: (accel) acceleration factor: 2.000
[   912.835] (**) SIGMACHIP Usb Mouse: (accel) acceleration threshold: 4
[   912.893] (II) event4  - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse
[   912.893] (II) event4  - SIGMACHIP Usb Mouse: device is a pointer
[   912.893] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/mouse1)
[   912.893] (**) SIGMACHIP Usb Mouse: Applying InputClass "My Mouse"
[   912.893] (II) No input driver specified, ignoring this device.
[   912.893] (II) This device may have been added with another device file.
[   912.894] (II) config/udev: Adding input device Gaming Keyboard (/dev/input/event7)
[   912.894] (**) Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[   912.894] (**) Gaming Keyboard: Applying InputClass "system-keyboard"
[   912.894] (II) Using input driver 'libinput' for 'Gaming Keyboard'
[   912.894] (**) Gaming Keyboard: always reports core events
[   912.894] (**) Option "Device" "/dev/input/event7"
[   912.894] (**) Option "_source" "server/udev"
[   912.895] (II) event7  - Gaming Keyboard: is tagged by udev as: Keyboard
[   912.895] (II) event7  - Gaming Keyboard: device is a keyboard
[   912.895] (II) event7  - Gaming Keyboard: device removed
[   912.919] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb6/6-1/6-1.1/6-1.1:1.0/0003:046D:C221.0006/input/input9/event7"
[   912.919] (II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD, id 11)
[   912.919] (**) Option "xkb_layout" "us,gr"
[   912.919] (**) Option "xkb_variant" ",extended"
[   912.922] (II) event7  - Gaming Keyboard: is tagged by udev as: Keyboard
[   912.922] (II) event7  - Gaming Keyboard: device is a keyboard
[   912.924] (II) config/udev: Adding input device Gaming Keyboard Consumer Control (/dev/input/event12)
[   912.924] (**) Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[   912.924] (**) Gaming Keyboard Consumer Control: Applying InputClass "system-keyboard"
[   912.924] (II) Using input driver 'libinput' for 'Gaming Keyboard Consumer Control'
[   912.924] (**) Gaming Keyboard Consumer Control: always reports core events
[   912.924] (**) Option "Device" "/dev/input/event12"
[   912.924] (**) Option "_source" "server/udev"
[   912.928] (II) event12 - Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[   912.928] (II) event12 - Gaming Keyboard Consumer Control: device is a keyboard
[   912.928] (II) event12 - Gaming Keyboard Consumer Control: device removed
[   912.985] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb6/6-1/6-1.1/6-1.1:1.1/0003:046D:C221.0009/input/input14/event12"
[   912.985] (II) XINPUT: Adding extended input device "Gaming Keyboard Consumer Control" (type: KEYBOARD, id 12)
[   912.985] (**) Option "xkb_layout" "us,gr"
[   912.985] (**) Option "xkb_variant" ",extended"
[   912.989] (II) event12 - Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[   912.989] (II) event12 - Gaming Keyboard Consumer Control: device is a keyboard
[   912.990] (II) config/udev: Adding input device USB2.0 PC CAMERA: USB2.0 PC CAM (/dev/input/event28)
[   912.990] (**) USB2.0 PC CAMERA: USB2.0 PC CAM: Applying InputClass "libinput keyboard catchall"
[   912.990] (**) USB2.0 PC CAMERA: USB2.0 PC CAM: Applying InputClass "system-keyboard"
[   912.990] (II) Using input driver 'libinput' for 'USB2.0 PC CAMERA: USB2.0 PC CAM'
[   912.990] (**) USB2.0 PC CAMERA: USB2.0 PC CAM: always reports core events
[   912.990] (**) Option "Device" "/dev/input/event28"
[   912.990] (**) Option "_source" "server/udev"
[   912.993] (II) event28 - USB2.0 PC CAMERA: USB2.0 PC CAM: is tagged by udev as: Keyboard
[   912.993] (II) event28 - USB2.0 PC CAMERA: USB2.0 PC CAM: device is a keyboard
[   912.993] (II) event28 - USB2.0 PC CAMERA: USB2.0 PC CAM: device removed
[   913.049] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input35/event28"
[   913.049] (II) XINPUT: Adding extended input device "USB2.0 PC CAMERA: USB2.0 PC CAM" (type: KEYBOARD, id 13)
[   913.049] (**) Option "xkb_layout" "us,gr"
[   913.049] (**) Option "xkb_variant" ",extended"
[   913.052] (II) event28 - USB2.0 PC CAMERA: USB2.0 PC CAM: is tagged by udev as: Keyboard
[   913.052] (II) event28 - USB2.0 PC CAMERA: USB2.0 PC CAM: device is a keyboard
[   913.053] (II) config/udev: Adding input device www.irfmedia.com  W-01RN USB_V4.0 (/dev/input/event5)
[   913.053] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "libinput keyboard catchall"
[   913.054] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "system-keyboard"
[   913.054] (II) Using input driver 'libinput' for 'www.irfmedia.com  W-01RN USB_V4.0'
[   913.054] (**) www.irfmedia.com  W-01RN USB_V4.0: always reports core events
[   913.054] (**) Option "Device" "/dev/input/event5"
[   913.054] (**) Option "_source" "server/udev"
[   913.057] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard
[   913.057] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[   913.057] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device removed
[   913.110] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.0/0003:0755:2626.0004/input/input7/event5"
[   913.110] (II) XINPUT: Adding extended input device "www.irfmedia.com  W-01RN USB_V4.0" (type: KEYBOARD, id 14)
[   913.110] (**) Option "xkb_layout" "us,gr"
[   913.110] (**) Option "xkb_variant" ",extended"
[   913.113] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard
[   913.113] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[   913.115] (II) config/udev: Adding input device www.irfmedia.com  W-01RN USB_V4.0 (/dev/input/event6)
[   913.115] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "libinput pointer catchall"
[   913.115] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "libinput keyboard catchall"
[   913.115] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "My Mouse"
[   913.115] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "system-keyboard"
[   913.115] (II) Using input driver 'libinput' for 'www.irfmedia.com  W-01RN USB_V4.0'
[   913.115] (**) www.irfmedia.com  W-01RN USB_V4.0: always reports core events
[   913.115] (**) Option "Device" "/dev/input/event6"
[   913.115] (**) Option "_source" "server/udev"
[   913.117] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard Mouse
[   913.118] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a pointer
[   913.118] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[   913.118] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device removed
[   913.155] (**) Option "AccelSpeed" "-1"
[   913.155] (II) libinput: www.irfmedia.com  W-01RN USB_V4.0: needs a virtual subdevice
[   913.155] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.1/0003:0755:2626.0005/input/input8/event6"
[   913.155] (II) XINPUT: Adding extended input device "www.irfmedia.com  W-01RN USB_V4.0" (type: MOUSE, id 15)
[   913.155] (**) Option "AccelerationScheme" "none"
[   913.155] (**) www.irfmedia.com  W-01RN USB_V4.0: (accel) selected scheme none/0
[   913.155] (**) www.irfmedia.com  W-01RN USB_V4.0: (accel) acceleration factor: 2.000
[   913.155] (**) www.irfmedia.com  W-01RN USB_V4.0: (accel) acceleration threshold: 4
[   913.157] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard Mouse
[   913.157] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a pointer
[   913.157] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[   913.157] (II) config/udev: Adding input device www.irfmedia.com  W-01RN USB_V4.0 (/dev/input/mouse2)
[   913.157] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "My Mouse"
[   913.157] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "system-keyboard"
[   913.157] (II) No input driver specified, ignoring this device.
[   913.157] (II) This device may have been added with another device file.
[   913.158] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse (/dev/input/event8)
[   913.158] (**) Full-Speed Mouse Full-Speed Mouse: Applying InputClass "libinput pointer catchall"
[   913.158] (**) Full-Speed Mouse Full-Speed Mouse: Applying InputClass "My Mouse"
[   913.158] (II) Using input driver 'libinput' for 'Full-Speed Mouse Full-Speed Mouse'
[   913.158] (**) Full-Speed Mouse Full-Speed Mouse: always reports core events
[   913.158] (**) Option "Device" "/dev/input/event8"
[   913.158] (**) Option "_source" "server/udev"
[   913.213] (II) event8  - Full-Speed Mouse Full-Speed Mouse: is tagged by udev as: Mouse
[   913.213] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device is a pointer
[   913.213] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device removed
[   913.255] (**) Option "AccelSpeed" "-1"
[   913.255] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb8/8-3/8-3:1.0/0003:062A:7227.0007/input/input10/event8"
[   913.255] (II) XINPUT: Adding extended input device "Full-Speed Mouse Full-Speed Mouse" (type: MOUSE, id 16)
[   913.255] (**) Option "AccelerationScheme" "none"
[   913.255] (**) Full-Speed Mouse Full-Speed Mouse: (accel) selected scheme none/0
[   913.255] (**) Full-Speed Mouse Full-Speed Mouse: (accel) acceleration factor: 2.000
[   913.255] (**) Full-Speed Mouse Full-Speed Mouse: (accel) acceleration threshold: 4
[   913.313] (II) event8  - Full-Speed Mouse Full-Speed Mouse: is tagged by udev as: Mouse
[   913.313] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device is a pointer
[   913.313] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse (/dev/input/mouse3)
[   913.314] (**) Full-Speed Mouse Full-Speed Mouse: Applying InputClass "My Mouse"
[   913.314] (II) No input driver specified, ignoring this device.
[   913.314] (II) This device may have been added with another device file.
[   913.314] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse (/dev/input/event9)
[   913.314] (II) No input driver specified, ignoring this device.
[   913.314] (II) This device may have been added with another device file.
[   913.315] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse Keyboard (/dev/input/event10)
[   913.315] (**) Full-Speed Mouse Full-Speed Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[   913.315] (**) Full-Speed Mouse Full-Speed Mouse Keyboard: Applying InputClass "system-keyboard"
[   913.315] (II) Using input driver 'libinput' for 'Full-Speed Mouse Full-Speed Mouse Keyboard'
[   913.315] (**) Full-Speed Mouse Full-Speed Mouse Keyboard: always reports core events
[   913.315] (**) Option "Device" "/dev/input/event10"
[   913.315] (**) Option "_source" "server/udev"
[   913.316] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: is tagged by udev as: Keyboard
[   913.316] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device is a keyboard
[   913.316] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device removed
[   913.339] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb8/8-3/8-3:1.1/0003:062A:7227.0008/input/input12/event10"
[   913.339] (II) XINPUT: Adding extended input device "Full-Speed Mouse Full-Speed Mouse Keyboard" (type: KEYBOARD, id 17)
[   913.339] (**) Option "xkb_layout" "us,gr"
[   913.339] (**) Option "xkb_variant" ",extended"
[   913.342] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: is tagged by udev as: Keyboard
[   913.342] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device is a keyboard
[   913.344] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse Consumer Control (/dev/input/event11)
[   913.344] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[   913.344] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: Applying InputClass "system-keyboard"
[   913.344] (II) Using input driver 'libinput' for 'Full-Speed Mouse Full-Speed Mouse Consumer Control'
[   913.344] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: always reports core events
[   913.344] (**) Option "Device" "/dev/input/event11"
[   913.345] (**) Option "_source" "server/udev"
[   913.348] (II) event11 - Full-Speed Mouse Full-Speed Mouse Consumer Control: is tagged by udev as: Keyboard
[   913.348] (II) event11 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device is a keyboard
[   913.348] (II) event11 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device removed
[   913.382] (II) libinput: Full-Speed Mouse Full-Speed Mouse Consumer Control: needs a virtual subdevice
[   913.382] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb8/8-3/8-3:1.1/0003:062A:7227.0008/input/input13/event11"
[   913.382] (II) XINPUT: Adding extended input device "Full-Speed Mouse Full-Speed Mouse Consumer Control" (type: MOUSE, id 18)
[   913.382] (**) Option "AccelerationScheme" "none"
[   913.382] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: (accel) selected scheme none/0
[   913.382] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: (accel) acceleration factor: 2.000
[   913.382] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: (accel) acceleration threshold: 4
[   913.383] (II) event11 - Full-Speed Mouse Full-Speed Mouse Consumer Control: is tagged by udev as: Keyboard
[   913.383] (II) event11 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device is a keyboard
[   913.384] (II) config/udev: Adding input device HID 0a5c:4502 (/dev/input/event16)
[   913.384] (**) HID 0a5c:4502: Applying InputClass "libinput keyboard catchall"
[   913.384] (**) HID 0a5c:4502: Applying InputClass "system-keyboard"
[   913.384] (II) Using input driver 'libinput' for 'HID 0a5c:4502'
[   913.384] (**) HID 0a5c:4502: always reports core events
[   913.384] (**) Option "Device" "/dev/input/event16"
[   913.384] (**) Option "_source" "server/udev"
[   913.386] (II) event16 - HID 0a5c:4502: is tagged by udev as: Keyboard
[   913.386] (II) event16 - HID 0a5c:4502: device is a keyboard
[   913.386] (II) event16 - HID 0a5c:4502: device removed
[   913.409] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.3/2-4.3.1/2-4.3.1:1.0/0003:0A5C:4502.000D/input/input22/event16"
[   913.409] (II) XINPUT: Adding extended input device "HID 0a5c:4502" (type: KEYBOARD, id 19)
[   913.409] (**) Option "xkb_layout" "us,gr"
[   913.409] (**) Option "xkb_variant" ",extended"
[   913.413] (II) event16 - HID 0a5c:4502: is tagged by udev as: Keyboard
[   913.413] (II) event16 - HID 0a5c:4502: device is a keyboard
[   913.415] (II) config/udev: Adding input device HID 0a5c:4503 Mouse (/dev/input/event17)
[   913.415] (**) HID 0a5c:4503 Mouse: Applying InputClass "libinput pointer catchall"
[   913.415] (**) HID 0a5c:4503 Mouse: Applying InputClass "My Mouse"
[   913.415] (II) Using input driver 'libinput' for 'HID 0a5c:4503 Mouse'
[   913.415] (**) HID 0a5c:4503 Mouse: always reports core events
[   913.415] (**) Option "Device" "/dev/input/event17"
[   913.415] (**) Option "_source" "server/udev"
[   913.475] (II) event17 - HID 0a5c:4503 Mouse: is tagged by udev as: Mouse
[   913.475] (II) event17 - HID 0a5c:4503 Mouse: device is a pointer
[   913.476] (II) event17 - HID 0a5c:4503 Mouse: device removed
[   913.555] (**) Option "AccelSpeed" "-1"
[   913.555] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.3/2-4.3.2/2-4.3.2:1.0/0003:0A5C:4503.000E/input/input23/event17"
[   913.555] (II) XINPUT: Adding extended input device "HID 0a5c:4503 Mouse" (type: MOUSE, id 20)
[   913.555] (**) Option "AccelerationScheme" "none"
[   913.555] (**) HID 0a5c:4503 Mouse: (accel) selected scheme none/0
[   913.555] (**) HID 0a5c:4503 Mouse: (accel) acceleration factor: 2.000
[   913.555] (**) HID 0a5c:4503 Mouse: (accel) acceleration threshold: 4
[   913.613] (II) event17 - HID 0a5c:4503 Mouse: is tagged by udev as: Mouse
[   913.613] (II) event17 - HID 0a5c:4503 Mouse: device is a pointer
[   913.614] (II) config/udev: Adding input device HID 0a5c:4503 Mouse (/dev/input/mouse5)
[   913.614] (**) HID 0a5c:4503 Mouse: Applying InputClass "My Mouse"
[   913.614] (II) No input driver specified, ignoring this device.
[   913.614] (II) This device may have been added with another device file.
[   913.614] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event14)
[   913.614] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[   913.614] (**) Logitech USB Receiver: Applying InputClass "My Mouse"
[   913.614] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[   913.614] (**) Logitech USB Receiver: always reports core events
[   913.614] (**) Option "Device" "/dev/input/event14"
[   913.614] (**) Option "_source" "server/udev"
[   913.673] (II) event14 - Logitech USB Receiver: is tagged by udev as: Mouse
[   913.673] (II) event14 - Logitech USB Receiver: device set to 1000 DPI
[   913.673] (II) event14 - Logitech USB Receiver: device is a pointer
[   913.673] (II) event14 - Logitech USB Receiver: device removed
[   913.715] (**) Option "AccelSpeed" "-1"
[   913.715] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.0/0003:046D:C52F.000B/input/input18/event14"
[   913.715] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 21)
[   913.715] (**) Option "AccelerationScheme" "none"
[   913.715] (**) Logitech USB Receiver: (accel) selected scheme none/0
[   913.715] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   913.715] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   913.774] (II) event14 - Logitech USB Receiver: is tagged by udev as: Mouse
[   913.775] (II) event14 - Logitech USB Receiver: device set to 1000 DPI
[   913.775] (II) event14 - Logitech USB Receiver: device is a pointer
[   913.776] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse4)
[   913.776] (**) Logitech USB Receiver: Applying InputClass "My Mouse"
[   913.776] (II) No input driver specified, ignoring this device.
[   913.776] (II) This device may have been added with another device file.
[   913.778] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event15)
[   913.778] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[   913.778] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[   913.778] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[   913.778] (**) Logitech USB Receiver Consumer Control: always reports core events
[   913.778] (**) Option "Device" "/dev/input/event15"
[   913.778] (**) Option "_source" "server/udev"
[   913.782] (II) event15 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[   913.782] (II) event15 - Logitech USB Receiver Consumer Control: device is a keyboard
[   913.782] (II) event15 - Logitech USB Receiver Consumer Control: device removed
[   913.808] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[   913.809] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.1/0003:046D:C52F.000C/input/input19/event15"
[   913.809] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 22)
[   913.809] (**) Option "AccelerationScheme" "none"
[   913.809] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[   913.809] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[   913.809] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[   913.810] (II) event15 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[   913.810] (II) event15 - Logitech USB Receiver Consumer Control: device is a keyboard
[   913.810] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event25)
[   913.810] (II) No input driver specified, ignoring this device.
[   913.810] (II) This device may have been added with another device file.
[   913.811] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event26)
[   913.811] (II) No input driver specified, ignoring this device.
[   913.811] (II) This device may have been added with another device file.
[   913.811] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event27)
[   913.811] (II) No input driver specified, ignoring this device.
[   913.811] (II) This device may have been added with another device file.
[   913.811] (II) config/udev: Adding input device PC Speaker (/dev/input/event18)
[   913.811] (II) No input driver specified, ignoring this device.
[   913.811] (II) This device may have been added with another device file.
[   913.812] (II) config/udev: Adding input device G15 Extra Keys (/dev/input/event13)
[   913.812] (**) G15 Extra Keys: Applying InputClass "libinput keyboard catchall"
[   913.812] (**) G15 Extra Keys: Applying InputClass "system-keyboard"
[   913.812] (II) Using input driver 'libinput' for 'G15 Extra Keys'
[   913.812] (**) G15 Extra Keys: always reports core events
[   913.812] (**) Option "Device" "/dev/input/event13"
[   913.812] (**) Option "_source" "server/udev"
[   913.812] (II) event13 - G15 Extra Keys: is tagged by udev as: Keyboard
[   913.812] (II) event13 - G15 Extra Keys: device is a keyboard
[   913.813] (II) event13 - G15 Extra Keys: device removed
[   913.829] (**) Option "config_info" "udev:/sys/devices/virtual/input/input36/event13"
[   913.829] (II) XINPUT: Adding extended input device "G15 Extra Keys" (type: KEYBOARD, id 23)
[   913.829] (**) Option "xkb_layout" "us,gr"
[   913.829] (**) Option "xkb_variant" ",extended"
[   913.830] (II) event13 - G15 Extra Keys: is tagged by udev as: Keyboard
[   913.831] (II) event13 - G15 Extra Keys: device is a keyboard
[   913.841] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "libinput pointer catchall"
[   913.841] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "libinput keyboard catchall"
[   913.841] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "My Mouse"
[   913.841] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "system-keyboard"
[   913.841] (II) Using input driver 'libinput' for 'www.irfmedia.com  W-01RN USB_V4.0'
[   913.841] (**) www.irfmedia.com  W-01RN USB_V4.0: always reports core events
[   913.841] (**) Option "Device" "/dev/input/event6"
[   913.841] (**) Option "_source" "_driver/libinput"
[   913.842] (II) libinput: www.irfmedia.com  W-01RN USB_V4.0: is a virtual subdevice
[   913.842] (**) Option "AccelSpeed" "-1"
[   913.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.1/0003:0755:2626.0005/input/input8/event6"
[   913.842] (II) XINPUT: Adding extended input device "www.irfmedia.com  W-01RN USB_V4.0" (type: KEYBOARD, id 24)
[   913.842] (**) Option "xkb_layout" "us,gr"
[   913.842] (**) Option "xkb_variant" ",extended"
[   913.842] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[   913.842] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: Applying InputClass "system-keyboard"
[   913.842] (II) Using input driver 'libinput' for 'Full-Speed Mouse Full-Speed Mouse Consumer Control'
[   913.842] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: always reports core events
[   913.842] (**) Option "Device" "/dev/input/event11"
[   913.842] (**) Option "_source" "_driver/libinput"
[   913.842] (II) libinput: Full-Speed Mouse Full-Speed Mouse Consumer Control: is a virtual subdevice
[   913.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb8/8-3/8-3:1.1/0003:062A:7227.0008/input/input13/event11"
[   913.842] (II) XINPUT: Adding extended input device "Full-Speed Mouse Full-Speed Mouse Consumer Control" (type: KEYBOARD, id 25)
[   913.842] (**) Option "xkb_layout" "us,gr"
[   913.843] (**) Option "xkb_variant" ",extended"
[   913.843] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[   913.843] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[   913.843] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[   913.843] (**) Logitech USB Receiver Consumer Control: always reports core events
[   913.843] (**) Option "Device" "/dev/input/event15"
[   913.843] (**) Option "_source" "_driver/libinput"
[   913.843] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[   913.843] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.1/0003:046D:C52F.000C/input/input19/event15"
[   913.843] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 26)
[   913.843] (**) Option "xkb_layout" "us,gr"
[   913.843] (**) Option "xkb_variant" ",extended"
[   913.861] (EE) modeset(0): failed to set mode: Invalid argument
[   914.480] (II) modeset(0): Disabling kernel dirty updates, not required.
[   915.452] (II) event1  - Power Button: device removed
[   915.482] (II) event0  - Power Button: device removed
[   915.630] (II) event4  - SIGMACHIP Usb Mouse: device removed
[   915.695] (II) event7  - Gaming Keyboard: device removed
[   915.742] (II) event12 - Gaming Keyboard Consumer Control: device removed
[   915.808] (II) event28 - USB2.0 PC CAMERA: USB2.0 PC CAM: device removed
[   915.875] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device removed
[   915.929] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device removed
[   915.978] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device removed
[   916.015] (II) event16 - HID 0a5c:4502: device removed
[   916.041] (II) event17 - HID 0a5c:4503 Mouse: device removed
[   916.095] (II) event14 - Logitech USB Receiver: device removed
[   916.145] (II) event13 - G15 Extra Keys: device removed
[   916.174] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device removed
[   916.195] (II) event11 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device removed
[   916.235] (II) event15 - Logitech USB Receiver Consumer Control: device removed
[   916.258] (II) AIGLX: Suspending AIGLX clients for VT switch

Offline

#4 2019-06-23 05:27:03

seth
Member
Registered: 2012-09-03
Posts: 50,000

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

The identifiers in your first snippet are correct, in the second one not - that's why the latter has no whatsoever impact.

It doesn't look like the X11 server doesn't start or crash.
It's running and at the end you switched to another VT.

Inspect "xrandr -display :0" from the other VT (or a third one in case you're using startx, don't terminate the server w/ ctrl+c)
Also take lightdm out of the equation, use startx to start the server. https://wiki.archlinux.org/index.php/Xinit#xinitrc

Online

#5 2019-06-23 06:51:51

zaxdan69
Member
Registered: 2016-06-04
Posts: 271

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

After I logout of i3 while use the 10-monitor.conf I get a blank screen in vt7 with some messages and cannot interact there by any way. I can switch to another vt though. I have set vt2 to auto login to my user, so swithing there and run the xrandr command you suggested I get the error:

Invalid MIT-MAGIC-COOKIE-1 key Can't open display :0

Running "xinit i3" (it's already configured in xinitrc), I get

Fatal server error:
Server is already activ for display 0 If server is no longer running, remove /tmp/.X0-lock and start again......
Invalid MID-MAGIC-COOKIE-1 keyxinit: giving up
xinit: unable to cnnect to x server: Resource temporary anavailable
xinit:server error

when I comment out all lines in 10-monitor.conf file, when I switch to vt7 lightdm starts again automatic and I can login normally, but of cource monitor positions are swapped

Last edited by zaxdan69 (2019-06-23 06:54:57)

Offline

#6 2019-06-23 08:52:10

seth
Member
Registered: 2012-09-03
Posts: 50,000

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

Server is already activ for display 0

Did you stop lightdm before attempting to xinit i3?

Online

#7 2019-06-23 11:56:27

zaxdan69
Member
Registered: 2016-06-04
Posts: 271

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

No, but I did it and still doesn't run. I'm not sure if the error messages was the same, because I haven't access to graphical environment until I change the 10-monitor.conf file.
I also tried to restart lightdm service and then I get black screen with mouse cursor active and moving, but seems that only thi primary monitor is active. I cannot move the cursor to the second monitor
I put the xrandr command in i3' s config file, so this fix the position in i3' s restart. I also have correct lightdm' s screen which appear on the second monitor, following your suggestion above, but this didn't fix monitors positions on lightdm which are also opposite there.
So, at least the main problem(in i3) solved.

Offline

#8 2019-06-23 12:20:55

seth
Member
Registered: 2012-09-03
Posts: 50,000

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

Restore the config, disable lightdm and reboot (or boot into the multi-user.target, https://wiki.archlinux.org/index.php/Sy … boot_into) and startx/xinit.
If that still fails, report the actual error - you can "xinit i3 2>&1 | curl  -F 'f:1=<-' ix.io" to upload the output directly.

Online

#9 2019-06-23 15:15:22

zaxdan69
Member
Registered: 2016-06-04
Posts: 271

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

You lost me here!
I don't realy understand how to boot to multi-user target(maybe by "systemctl isolate multi-user.target?) but I think I can achive it by append the option to grub.
And then the command you posted upload the output to ix.io ? And how can I access it? It will give me a link?

Offline

#10 2019-06-23 15:18:47

seth
Member
Registered: 2012-09-03
Posts: 50,000

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

Add "systemd.unit=multi-user.target" to the kernel parameters in grub, you'll only boot into a console login then.
And yes, the command will print a link to the upload.
If xinit doesn't terminate, you might want to redirect the output into a file instead "xinit i3 > ~/xinit.log 2>&1" which you can then either upload or use from a graphical session.

Online

#11 2019-06-23 15:35:21

zaxdan69
Member
Registered: 2016-06-04
Posts: 271

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

Thanks, I did it and here is the output:

X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
Build Operating System: Linux Arch Linux
Current Operating System: Linux arch-desktop 5.1.12-arch1-1-ARCH #1 SMP PREEMPT Wed Jun 19 09:16:00 UTC 2019 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d28d2d85-0c43-4d25-925d-a189c5d957ed rw sysrq_always_enabled=1 fbcon=scrollback:128k systemd.unit=multi-user.target
Build Date: 30 May 2019  06:44:40PM
 
Current version of pixman: 0.38.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/user/.local/share/xorg/Xorg.0.log", Time: Sun Jun 23 18:26:16 2019
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) 
Fatal server error:
(EE) parse_vt_settings: Cannot open /dev/tty0 (Permission denied)
(EE) 
(EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
(EE) Please also check the log file at "/home/user/.local/share/xorg/Xorg.0.log" for additional information.
(EE) 
(EE) Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error

Offline

#12 2019-06-23 17:18:08

zaxdan69
Member
Registered: 2016-06-04
Posts: 271

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

Finally, I found the solution!
Wiki has the sections as I posted on my first post. I had a feeling that something' s missing because I have seen in other places that included a "device" section which I thought that if was mandatory it will included(or mentioned) in wiki. So I didn't try to add this section until now, but after all other things didn't seem to help I started to experience with this section also. At first I had same problems, but then I searched in wiki about amd driver and configuration and I added this section like this:

Section "Device"
    Identifier "AMD"
    Driver "amdgpu"
EndSection

Again I had the same problem, but when commented out the "monitor" sections again I managed to boot to graphical environment. Then I tried xrandr and I found that the monitors names had changed. So, I thought that now this was the problem and I changed them. After that all start to working as expected. Now and in lightdm and in i3 primary monitor and monitor postitons are correct.
Here is the working 10-monitor.conf file:

Section "Monitor"
    Identifier  "DVI-D-0"
    Modeline "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
    Option "PreferredMode" "1280x1024_60.00"
    Option "Primary" "true"
EndSection

Section "Monitor"
    Identifier  "HDMI-A-0"
    Modeline "1440x900_60.00"  106.50  1440 1528 1672 1904  900 903 909 934 -hsync +vsync
    Option "PreferredMode" "1440x900_60.00"
    Option "RightOf" "DVI-D-0"
EndSection

Section "Device"
    Identifier "AMD"
    Driver "amdgpu"
EndSection

I think that it will work and without the "Modeline" and "PreferedMode" options, but I didn't check it yet.
EDIT:
These options needed, otherwise resolution is not correct.

Last edited by zaxdan69 (2019-06-23 17:24:07)

Offline

#13 2019-06-23 19:37:46

seth
Member
Registered: 2012-09-03
Posts: 50,000

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

A device section is typically not required and your previous xorg logs do not suggest that xf86-video-amdgpu is even installed ("pacman -Qi xf86-video-amdgpu")
xinit fails because of a rootless Xorg server attempt, https://wiki.archlinux.org/index.php/Xorg#Rootless_Xorg - either enforce using root rights or try -keeptty

Please post your current Xorg log (ie. w/ the configlet from your last post)

Online

#14 2019-06-23 20:14:26

zaxdan69
Member
Registered: 2016-06-04
Posts: 271

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

This is the current xorg.log:

[ 11825.565] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 11825.565] Build Operating System: Linux Arch Linux
[ 11825.565] Current Operating System: Linux arch-desktop 5.1.12-arch1-1-ARCH #1 SMP PREEMPT Wed Jun 19 09:16:00 UTC 2019 x86_64
[ 11825.565] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d28d2d85-0c43-4d25-925d-a189c5d957ed rw sysrq_always_enabled=1 fbcon=scrollback:128k
[ 11825.565] Build Date: 30 May 2019  06:44:40PM
[ 11825.565]  
[ 11825.565] Current version of pixman: 0.38.4
[ 11825.565] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[ 11825.565] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11825.565] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 23 23:10:03 2019
[ 11825.566] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11825.566] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11825.566] (==) No Layout section.  Using the first Screen section.
[ 11825.566] (==) No screen section available. Using defaults.
[ 11825.566] (**) |-->Screen "Default Screen Section" (0)
[ 11825.566] (**) |   |-->Monitor "<default monitor>"
[ 11825.566] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[ 11825.566] (**) |   |-->Device "AMD"
[ 11825.566] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[ 11825.566] (==) Automatically adding devices
[ 11825.566] (==) Automatically enabling devices
[ 11825.566] (==) Automatically adding GPU devices
[ 11825.566] (==) Automatically binding GPU devices
[ 11825.566] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11825.566] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 11825.566] 	Entry deleted from font path.
[ 11825.566] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 11825.566] 	Entry deleted from font path.
[ 11825.566] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 11825.566] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi
[ 11825.566] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11825.566] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11825.566] (II) Module ABI versions:
[ 11825.566] 	X.Org ANSI C Emulation: 0.4
[ 11825.566] 	X.Org Video Driver: 24.0
[ 11825.566] 	X.Org XInput driver : 24.1
[ 11825.566] 	X.Org Server Extension : 10.0
[ 11825.583] (++) using VT number 7

[ 11825.583] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 11825.583] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11825.587] (--) PCI:*(1@0:0:0) 1002:67df:1da2:e343 rev 239, Mem @ 0xd0000000/268435456, 0xcfe00000/2097152, 0xfe9c0000/262144, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[ 11825.587] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11825.587] (II) LoadModule: "glx"
[ 11825.588] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11825.590] (II) Module glx: vendor="X.Org Foundation"
[ 11825.590] 	compiled for 1.20.5, module version = 1.0.0
[ 11825.590] 	ABI class: X.Org Server Extension, version 10.0
[ 11825.590] (II) LoadModule: "amdgpu"
[ 11825.590] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 11825.590] (II) Module amdgpu: vendor="X.Org Foundation"
[ 11825.590] 	compiled for 1.20.4, module version = 19.0.1
[ 11825.590] 	Module class: X.Org Video Driver
[ 11825.590] 	ABI class: X.Org Video Driver, version 24.0
[ 11825.591] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[ 11825.592] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 11825.592] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[ 11825.592] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 11825.592] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 11825.592] (==) AMDGPU(0): Default visual is TrueColor
[ 11825.592] (==) AMDGPU(0): RGB weight 888
[ 11825.592] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 11825.592] (--) AMDGPU(0): Chipset: "Radeon RX 570 Series" (ChipID = 0x67df)
[ 11825.592] (II) Loading sub module "fb"
[ 11825.592] (II) LoadModule: "fb"
[ 11825.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11825.593] (II) Module fb: vendor="X.Org Foundation"
[ 11825.593] 	compiled for 1.20.5, module version = 1.0.0
[ 11825.593] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 11825.593] (II) Loading sub module "dri2"
[ 11825.593] (II) LoadModule: "dri2"
[ 11825.593] (II) Module "dri2" already built-in
[ 11825.752] (II) Loading sub module "glamoregl"
[ 11825.752] (II) LoadModule: "glamoregl"
[ 11825.752] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 11825.764] (II) Module glamoregl: vendor="X.Org Foundation"
[ 11825.764] 	compiled for 1.20.5, module version = 1.0.1
[ 11825.764] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 11825.794] (II) AMDGPU(0): glamor X acceleration enabled on Radeon RX 570 Series (POLARIS10, DRM 3.30.0, 5.1.12-arch1-1-ARCH, LLVM 8.0.0)
[ 11825.794] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 11825.794] (==) AMDGPU(0): TearFree property default: auto
[ 11825.794] (==) AMDGPU(0): VariableRefresh: disabled
[ 11825.794] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 11825.794] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 11825.794] (II) AMDGPU(0): Output HDMI-A-0 using monitor section HDMI-A-0
[ 11825.794] (**) AMDGPU(0): Option "PreferredMode" "1440x900_60.00"
[ 11825.794] (**) AMDGPU(0): Option "RightOf" "DVI-D-0"
[ 11825.795] (II) AMDGPU(0): Output DVI-D-0 using monitor section DVI-D-0
[ 11825.795] (**) AMDGPU(0): Option "PreferredMode" "1280x1024_60.00"
[ 11825.795] (**) AMDGPU(0): Option "Primary" "true"
[ 11825.817] (II) AMDGPU(0): EDID for output DVI-D-0
[ 11825.817] (II) AMDGPU(0): Manufacturer: AOC  Model: a728  Serial#: 25997
[ 11825.817] (II) AMDGPU(0): Year: 2006  Week: 6
[ 11825.817] (II) AMDGPU(0): EDID Version: 1.3
[ 11825.817] (II) AMDGPU(0): Digital Display Input
[ 11825.817] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[ 11825.817] (II) AMDGPU(0): Gamma: 2.20
[ 11825.817] (II) AMDGPU(0): DPMS capabilities: Off
[ 11825.817] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[ 11825.817] (II) AMDGPU(0): First detailed timing is preferred mode
[ 11825.817] (II) AMDGPU(0): redX: 0.640 redY: 0.340   greenX: 0.289 greenY: 0.609
[ 11825.817] (II) AMDGPU(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.329
[ 11825.817] (II) AMDGPU(0): Supported established timings:
[ 11825.817] (II) AMDGPU(0): 720x400@70Hz
[ 11825.817] (II) AMDGPU(0): 640x480@60Hz
[ 11825.817] (II) AMDGPU(0): 640x480@67Hz
[ 11825.817] (II) AMDGPU(0): 640x480@72Hz
[ 11825.817] (II) AMDGPU(0): 640x480@75Hz
[ 11825.817] (II) AMDGPU(0): 800x600@56Hz
[ 11825.817] (II) AMDGPU(0): 800x600@60Hz
[ 11825.817] (II) AMDGPU(0): 800x600@72Hz
[ 11825.817] (II) AMDGPU(0): 800x600@75Hz
[ 11825.817] (II) AMDGPU(0): 832x624@75Hz
[ 11825.817] (II) AMDGPU(0): 1024x768@60Hz
[ 11825.817] (II) AMDGPU(0): 1024x768@70Hz
[ 11825.817] (II) AMDGPU(0): 1024x768@75Hz
[ 11825.817] (II) AMDGPU(0): 1280x1024@75Hz
[ 11825.817] (II) AMDGPU(0): Manufacturer's mask: 0
[ 11825.817] (II) AMDGPU(0): Supported standard timings:
[ 11825.817] (II) AMDGPU(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[ 11825.817] (II) AMDGPU(0): Supported detailed timing:
[ 11825.817] (II) AMDGPU(0): clock: 135.0 MHz   Image Size:  340 x 270 mm
[ 11825.817] (II) AMDGPU(0): h_active: 1280  h_sync: 1296  h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 11825.817] (II) AMDGPU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 11825.817] (II) AMDGPU(0): Serial No: 29262JA025997
[ 11825.817] (II) AMDGPU(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 11825.817] (II) AMDGPU(0): Monitor name: LM728
[ 11825.817] (II) AMDGPU(0): EDID (in hex):
[ 11825.817] (II) AMDGPU(0): 	00ffffffffffff0005e328a78d650000
[ 11825.817] (II) AMDGPU(0): 	0610010380221b782ac0f5a3574a9c23
[ 11825.817] (II) AMDGPU(0): 	114f54bfef0081800101010101010101
[ 11825.817] (II) AMDGPU(0): 	010101010101bc34009851002a401090
[ 11825.817] (II) AMDGPU(0): 	1300540e1100001e000000ff00323932
[ 11825.817] (II) AMDGPU(0): 	36324a41303235393937000000fd0037
[ 11825.817] (II) AMDGPU(0): 	4b1e530e000a202020202020000000fc
[ 11825.817] (II) AMDGPU(0): 	004c4d3732380a20202020202020007d
[ 11825.817] (II) AMDGPU(0): Printing probed modes for output DVI-D-0
[ 11825.817] (II) AMDGPU(0): Modeline "1280x1024_60.00"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz UP)
[ 11825.817] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)
[ 11825.817] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "1280x800"x75.0  135.00  1280 1296 1440 1688  800 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "1280x720"x75.0  135.00  1280 1296 1440 1688  720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11825.817] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11825.817] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 11825.818] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 11825.818] (II) AMDGPU(0): Manufacturer: GSM  Model: 4b32  Serial#: 69271
[ 11825.818] (II) AMDGPU(0): Year: 2007  Week: 50
[ 11825.818] (II) AMDGPU(0): EDID Version: 1.3
[ 11825.818] (II) AMDGPU(0): Digital Display Input
[ 11825.818] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[ 11825.818] (II) AMDGPU(0): Gamma: 2.20
[ 11825.818] (II) AMDGPU(0): DPMS capabilities: StandBy Suspend Off
[ 11825.818] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[ 11825.818] (II) AMDGPU(0): First detailed timing is preferred mode
[ 11825.818] (II) AMDGPU(0): redX: 0.640 redY: 0.334   greenX: 0.286 greenY: 0.599
[ 11825.818] (II) AMDGPU(0): blueX: 0.154 blueY: 0.077   whiteX: 0.313 whiteY: 0.329
[ 11825.818] (II) AMDGPU(0): Supported established timings:
[ 11825.818] (II) AMDGPU(0): 720x400@70Hz
[ 11825.818] (II) AMDGPU(0): 640x480@60Hz
[ 11825.818] (II) AMDGPU(0): 640x480@67Hz
[ 11825.818] (II) AMDGPU(0): 640x480@72Hz
[ 11825.818] (II) AMDGPU(0): 640x480@75Hz
[ 11825.818] (II) AMDGPU(0): 800x600@56Hz
[ 11825.818] (II) AMDGPU(0): 800x600@60Hz
[ 11825.818] (II) AMDGPU(0): 800x600@72Hz
[ 11825.818] (II) AMDGPU(0): 800x600@75Hz
[ 11825.818] (II) AMDGPU(0): 832x624@75Hz
[ 11825.818] (II) AMDGPU(0): 1024x768@60Hz
[ 11825.818] (II) AMDGPU(0): 1024x768@70Hz
[ 11825.818] (II) AMDGPU(0): 1024x768@75Hz
[ 11825.818] (II) AMDGPU(0): 1280x1024@75Hz
[ 11825.818] (II) AMDGPU(0): 1152x864@75Hz
[ 11825.818] (II) AMDGPU(0): Manufacturer's mask: 0
[ 11825.818] (II) AMDGPU(0): Supported standard timings:
[ 11825.818] (II) AMDGPU(0): #0: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[ 11825.818] (II) AMDGPU(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
[ 11825.818] (II) AMDGPU(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
[ 11825.818] (II) AMDGPU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[ 11825.818] (II) AMDGPU(0): Supported detailed timing:
[ 11825.818] (II) AMDGPU(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[ 11825.818] (II) AMDGPU(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 11825.818] (II) AMDGPU(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[ 11825.818] (II) AMDGPU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 11825.818] (II) AMDGPU(0): Monitor name: L192WS
[ 11825.818] (II) AMDGPU(0): Monitor name: 
[ 11825.818] (II) AMDGPU(0): Supported detailed timing:
[ 11825.818] (II) AMDGPU(0): clock: 27.0 MHz   Image Size:  160 x 90 mm
[ 11825.818] (II) AMDGPU(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[ 11825.818] (II) AMDGPU(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[ 11825.818] (II) AMDGPU(0): Number of EDID sections to follow: 1
[ 11825.818] (II) AMDGPU(0): EDID (in hex):
[ 11825.818] (II) AMDGPU(0): 	00ffffffffffff001e6d324b970e0100
[ 11825.818] (II) AMDGPU(0): 	3211010380291a78eae5b5a355499927
[ 11825.818] (II) AMDGPU(0): 	135054bfef80950f454f614f81800101
[ 11825.818] (II) AMDGPU(0): 	0101010101019a29a0d0518422305098
[ 11825.818] (II) AMDGPU(0): 	36009a001100001c000000fd00384b1e
[ 11825.818] (II) AMDGPU(0): 	530e000a202020202020000000fc004c
[ 11825.818] (II) AMDGPU(0): 	31393257530a202020202020000000fc
[ 11825.818] (II) AMDGPU(0): 	00200a20202020202020202020200194
[ 11825.818] (II) AMDGPU(0): 	02031b61230907078301000067030c00
[ 11825.818] (II) AMDGPU(0): 	2000802d43908402e2000f8c0ad08a20
[ 11825.818] (II) AMDGPU(0): 	e02d10103e9600a05a00000000000000
[ 11825.818] (II) AMDGPU(0): 	00000000000000000000000000000000
[ 11825.818] (II) AMDGPU(0): 	00000000000000000000000000000000
[ 11825.818] (II) AMDGPU(0): 	00000000000000000000000000000000
[ 11825.818] (II) AMDGPU(0): 	00000000000000000000000000000000
[ 11825.818] (II) AMDGPU(0): 	00000000000000000000000000000029
[ 11825.818] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz
[ 11825.818] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0
[ 11825.818] (II) AMDGPU(0): Modeline "1440x900_60.00"x59.9  106.50  1440 1528 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz UP)
[ 11825.818] (II) AMDGPU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 11825.818] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1280x800"x59.9  106.50  1280 1520 1672 1904  800 903 909 934 -hsync +vsync (55.9 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 11825.818] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11825.819] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11825.819] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 11825.819] (II) AMDGPU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 11825.819] (II) AMDGPU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 11825.819] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11825.819] (II) AMDGPU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 11825.819] (II) AMDGPU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 11825.819] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11825.819] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11825.819] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11825.819] (II) AMDGPU(0): Output DVI-D-0 connected
[ 11825.819] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 11825.819] (II) AMDGPU(0): Output HDMI-A-0 connected
[ 11825.819] (II) AMDGPU(0): Using user preference for initial modes
[ 11825.819] (II) AMDGPU(0): Output DVI-D-0 using initial mode 1280x1024_60.00 +0+0
[ 11825.819] (II) AMDGPU(0): Output HDMI-A-0 using initial mode 1440x900_60.00 +0+0
[ 11825.819] (II) AMDGPU(0): mem size init: gart size :ffd3d000 vram size: s:ff511000 visible:f511000
[ 11825.819] (==) AMDGPU(0): DPI set to (96, 96)
[ 11825.819] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11825.819] (II) Loading sub module "ramdac"
[ 11825.819] (II) LoadModule: "ramdac"
[ 11825.819] (II) Module "ramdac" already built-in
[ 11825.819] (II) AMDGPU(0): [DRI2] Setup complete
[ 11825.819] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[ 11825.819] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[ 11825.819] (II) AMDGPU(0): Front buffer pitch: 11264 bytes
[ 11825.819] (II) AMDGPU(0): SYNC extension fences enabled
[ 11825.819] (II) AMDGPU(0): Present extension enabled
[ 11825.819] (==) AMDGPU(0): DRI3 enabled
[ 11825.819] (==) AMDGPU(0): Backing store enabled
[ 11825.819] (II) AMDGPU(0): Direct rendering enabled
[ 11825.827] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 11825.827] (II) AMDGPU(0): Acceleration enabled
[ 11825.827] (==) AMDGPU(0): DPMS enabled
[ 11825.827] (==) AMDGPU(0): Silken mouse disabled
[ 11825.827] (II) AMDGPU(0): Set up textured video (glamor)
[ 11825.836] (II) Initializing extension Generic Event Extension
[ 11825.837] (II) Initializing extension SHAPE
[ 11825.837] (II) Initializing extension MIT-SHM
[ 11825.837] (II) Initializing extension XInputExtension
[ 11825.837] (II) Initializing extension XTEST
[ 11825.837] (II) Initializing extension BIG-REQUESTS
[ 11825.837] (II) Initializing extension SYNC
[ 11825.838] (II) Initializing extension XKEYBOARD
[ 11825.838] (II) Initializing extension XC-MISC
[ 11825.838] (II) Initializing extension SECURITY
[ 11825.838] (II) Initializing extension XFIXES
[ 11825.838] (II) Initializing extension RENDER
[ 11825.838] (II) Initializing extension RANDR
[ 11825.839] (II) Initializing extension COMPOSITE
[ 11825.839] (II) Initializing extension DAMAGE
[ 11825.839] (II) Initializing extension MIT-SCREEN-SAVER
[ 11825.839] (II) Initializing extension DOUBLE-BUFFER
[ 11825.839] (II) Initializing extension RECORD
[ 11825.839] (II) Initializing extension DPMS
[ 11825.839] (II) Initializing extension Present
[ 11825.840] (II) Initializing extension DRI3
[ 11825.840] (II) Initializing extension X-Resource
[ 11825.840] (II) Initializing extension XVideo
[ 11825.840] (II) Initializing extension XVideo-MotionCompensation
[ 11825.840] (II) Initializing extension GLX
[ 11825.846] (II) AIGLX: Loaded and initialized radeonsi
[ 11825.846] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 11825.846] (II) Initializing extension XFree86-VidModeExtension
[ 11825.846] (II) Initializing extension XFree86-DGA
[ 11825.846] (II) Initializing extension XFree86-DRI
[ 11825.846] (II) Initializing extension DRI2
[ 11825.847] (II) AMDGPU(0): Setting screen physical size to 719 x 270
[ 11826.057] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 11826.057] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 11826.057] (**) Power Button: Applying InputClass "system-keyboard"
[ 11826.057] (II) LoadModule: "libinput"
[ 11826.057] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 11826.062] (II) Module libinput: vendor="X.Org Foundation"
[ 11826.062] 	compiled for 1.20.3, module version = 0.28.2
[ 11826.063] 	Module class: X.Org XInput Driver
[ 11826.063] 	ABI class: X.Org XInput driver, version 24.1
[ 11826.063] (II) Using input driver 'libinput' for 'Power Button'
[ 11826.063] (**) Power Button: always reports core events
[ 11826.063] (**) Option "Device" "/dev/input/event1"
[ 11826.063] (**) Option "_source" "server/udev"
[ 11826.064] (II) event1  - Power Button: is tagged by udev as: Keyboard
[ 11826.064] (II) event1  - Power Button: device is a keyboard
[ 11826.064] (II) event1  - Power Button: device removed
[ 11826.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 11826.089] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11826.089] (**) Option "xkb_layout" "us,gr"
[ 11826.089] (**) Option "xkb_variant" ",extended"
[ 11826.120] (II) event1  - Power Button: is tagged by udev as: Keyboard
[ 11826.120] (II) event1  - Power Button: device is a keyboard
[ 11826.121] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 11826.121] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 11826.121] (**) Power Button: Applying InputClass "system-keyboard"
[ 11826.121] (II) Using input driver 'libinput' for 'Power Button'
[ 11826.121] (**) Power Button: always reports core events
[ 11826.121] (**) Option "Device" "/dev/input/event0"
[ 11826.121] (**) Option "_source" "server/udev"
[ 11826.121] (II) event0  - Power Button: is tagged by udev as: Keyboard
[ 11826.122] (II) event0  - Power Button: device is a keyboard
[ 11826.122] (II) event0  - Power Button: device removed
[ 11826.139] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 11826.139] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 11826.139] (**) Option "xkb_layout" "us,gr"
[ 11826.139] (**) Option "xkb_variant" ",extended"
[ 11826.139] (II) event0  - Power Button: is tagged by udev as: Keyboard
[ 11826.140] (II) event0  - Power Button: device is a keyboard
[ 11826.140] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event20)
[ 11826.140] (II) No input driver specified, ignoring this device.
[ 11826.140] (II) This device may have been added with another device file.
[ 11826.141] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event21)
[ 11826.141] (II) No input driver specified, ignoring this device.
[ 11826.141] (II) This device may have been added with another device file.
[ 11826.141] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event22)
[ 11826.141] (II) No input driver specified, ignoring this device.
[ 11826.141] (II) This device may have been added with another device file.
[ 11826.141] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event23)
[ 11826.141] (II) No input driver specified, ignoring this device.
[ 11826.141] (II) This device may have been added with another device file.
[ 11826.142] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event24)
[ 11826.142] (II) No input driver specified, ignoring this device.
[ 11826.142] (II) This device may have been added with another device file.
[ 11826.142] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event25)
[ 11826.142] (II) No input driver specified, ignoring this device.
[ 11826.142] (II) This device may have been added with another device file.
[ 11826.143] (II) config/udev: Adding input device HUION Huion Tablet Pen (/dev/input/event2)
[ 11826.143] (**) HUION Huion Tablet Pen: Applying InputClass "libinput tablet catchall"
[ 11826.143] (**) HUION Huion Tablet Pen: Applying InputClass "Tablet"
[ 11826.143] (II) LoadModule: "wacom"
[ 11826.143] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 11826.143] (II) Module wacom: vendor="X.Org Foundation"
[ 11826.143] 	compiled for 1.19.6, module version = 0.36.1
[ 11826.143] 	Module class: X.Org XInput Driver
[ 11826.143] 	ABI class: X.Org XInput driver, version 24.1
[ 11826.143] (II) Build version: 0.36.1
[ 11826.143] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
	Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
	Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
	Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
	CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
	CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
	Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
	PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
	DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452, DTH2452,
	Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18,
	Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3,
	PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5,
	Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19,
	Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13,
	Intuos4 12x19, Intuos4 WL USB Endpoint,
	Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
	Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
	Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
	Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
	Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, Cintiq 27QHDT,
	Cintiq 27QHDT, Mobilestudio Pro 13, MobileStudio Pro 16,
	MobileStudio Pro 13, MobileStudio Pro 16, Cintiq 13 FHD Pro,
	Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq 13 FHD Pro,
	Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq Pro 24,
	TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A,
	CapPlus  0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5,
	TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF,
	TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116,
	TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000,
	TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026,
	usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031,
	usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035,
	usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039,
	usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054,
	usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058,
	usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503,
	usb:1b96:0001, usb:17ef:6004
[ 11826.144] (II) Using input driver 'wacom' for 'HUION Huion Tablet Pen'
[ 11826.144] (**) HUION Huion Tablet Pen: always reports core events
[ 11826.144] (**) Option "Device" "/dev/input/event2"
[ 11826.144] (II) HUION Huion Tablet Pen: type not specified, assuming 'stylus'.
[ 11826.144] (II) HUION Huion Tablet Pen: other types will be automatically added.
[ 11826.145] (--) HUION Huion Tablet Pen stylus: using pressure threshold of 851 for button 1
[ 11826.145] (**) HUION Huion Tablet Pen stylus: panscroll is 0
[ 11826.145] (**) HUION Huion Tablet Pen stylus: panscroll modified to 2600
[ 11826.145] (--) HUION Huion Tablet Pen stylus: maxX=24384 maxY=15240 maxZ=8191 resX=200000 resY=200000  tilt=enabled
[ 11826.145] (II) HUION Huion Tablet Pen stylus: hotplugging dependent devices.
[ 11826.145] (EE) HUION Huion Tablet Pen stylus: Invalid type 'eraser' for this device.
[ 11826.145] (EE) HUION Huion Tablet Pen stylus: Invalid type 'cursor' for this device.
[ 11826.145] (EE) HUION Huion Tablet Pen stylus: Invalid type 'touch' for this device.
[ 11826.145] (EE) HUION Huion Tablet Pen stylus: Invalid type 'pad' for this device.
[ 11826.145] (II) HUION Huion Tablet Pen stylus: hotplugging completed.
[ 11826.165] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:09.0/0000:03:00.0/usb1/1-3/1-3:1.0/0003:256C:006E.0001/input/input3/event2"
[ 11826.165] (II) XINPUT: Adding extended input device "HUION Huion Tablet Pen stylus" (type: STYLUS, id 8)
[ 11826.165] (**) HUION Huion Tablet Pen stylus: (accel) keeping acceleration scheme 1
[ 11826.166] (**) HUION Huion Tablet Pen stylus: (accel) acceleration profile 0
[ 11826.166] (**) HUION Huion Tablet Pen stylus: (accel) acceleration factor: 2.000
[ 11826.166] (**) HUION Huion Tablet Pen stylus: (accel) acceleration threshold: 4
[ 11826.166] (II) config/udev: Adding input device HUION Huion Tablet Pen (/dev/input/mouse0)
[ 11826.166] (II) No input driver specified, ignoring this device.
[ 11826.166] (II) This device may have been added with another device file.
[ 11826.167] (II) config/udev: Adding input device HUION Huion Tablet Pad (/dev/input/event3)
[ 11826.167] (**) HUION Huion Tablet Pad: Applying InputClass "libinput tablet catchall"
[ 11826.167] (**) HUION Huion Tablet Pad: Applying InputClass "Tablet"
[ 11826.167] (II) Using input driver 'wacom' for 'HUION Huion Tablet Pad'
[ 11826.167] (**) HUION Huion Tablet Pad: always reports core events
[ 11826.167] (**) Option "Device" "/dev/input/event3"
[ 11826.167] (EE) HUION Huion Tablet Pad: Invalid type 'stylus' for this device.
[ 11826.167] (EE) HUION Huion Tablet Pad: Invalid type 'eraser' for this device.
[ 11826.167] (EE) HUION Huion Tablet Pad: Invalid type 'cursor' for this device.
[ 11826.167] (EE) HUION Huion Tablet Pad: Invalid type 'touch' for this device.
[ 11826.167] (II) HUION Huion Tablet Pad: type not specified, assuming 'pad'.
[ 11826.167] (II) HUION Huion Tablet Pad: other types will be automatically added.
[ 11826.167] (**) HUION Huion Tablet Pad pad: panscroll is 0
[ 11826.167] (**) HUION Huion Tablet Pad pad: panscroll modified to 13
[ 11826.167] (II) HUION Huion Tablet Pad pad: hotplugging dependent devices.
[ 11826.167] (EE) HUION Huion Tablet Pad pad: Invalid type 'stylus' for this device.
[ 11826.167] (EE) HUION Huion Tablet Pad pad: Invalid type 'eraser' for this device.
[ 11826.167] (EE) HUION Huion Tablet Pad pad: Invalid type 'cursor' for this device.
[ 11826.167] (EE) HUION Huion Tablet Pad pad: Invalid type 'touch' for this device.
[ 11826.167] (II) HUION Huion Tablet Pad pad: hotplugging completed.
[ 11826.185] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:09.0/0000:03:00.0/usb1/1-3/1-3:1.0/0003:256C:006E.0001/input/input4/event3"
[ 11826.185] (II) XINPUT: Adding extended input device "HUION Huion Tablet Pad pad" (type: PAD, id 9)
[ 11826.186] (**) HUION Huion Tablet Pad pad: (accel) keeping acceleration scheme 1
[ 11826.186] (**) HUION Huion Tablet Pad pad: (accel) acceleration profile 0
[ 11826.186] (**) HUION Huion Tablet Pad pad: (accel) acceleration factor: 2.000
[ 11826.186] (**) HUION Huion Tablet Pad pad: (accel) acceleration threshold: 4
[ 11826.186] (II) config/udev: Adding input device HUION Huion Tablet Pad (/dev/input/js0)
[ 11826.186] (II) No input driver specified, ignoring this device.
[ 11826.186] (II) This device may have been added with another device file.
[ 11826.187] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event4)
[ 11826.187] (**) SIGMACHIP Usb Mouse: Applying InputClass "libinput pointer catchall"
[ 11826.187] (**) SIGMACHIP Usb Mouse: Applying InputClass "My Mouse"
[ 11826.187] (II) Using input driver 'libinput' for 'SIGMACHIP Usb Mouse'
[ 11826.187] (**) SIGMACHIP Usb Mouse: always reports core events
[ 11826.187] (**) Option "Device" "/dev/input/event4"
[ 11826.187] (**) Option "_source" "server/udev"
[ 11826.188] (II) event4  - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse
[ 11826.188] (II) event4  - SIGMACHIP Usb Mouse: device is a pointer
[ 11826.188] (II) event4  - SIGMACHIP Usb Mouse: device removed
[ 11826.205] (**) Option "AccelSpeed" "-1"
[ 11826.205] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:1C4F:0051.0003/input/input6/event4"
[ 11826.205] (II) XINPUT: Adding extended input device "SIGMACHIP Usb Mouse" (type: MOUSE, id 10)
[ 11826.205] (**) Option "AccelerationScheme" "none"
[ 11826.205] (**) SIGMACHIP Usb Mouse: (accel) selected scheme none/0
[ 11826.205] (**) SIGMACHIP Usb Mouse: (accel) acceleration factor: 2.000
[ 11826.205] (**) SIGMACHIP Usb Mouse: (accel) acceleration threshold: 4
[ 11826.207] (II) event4  - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse
[ 11826.207] (II) event4  - SIGMACHIP Usb Mouse: device is a pointer
[ 11826.207] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/mouse1)
[ 11826.207] (**) SIGMACHIP Usb Mouse: Applying InputClass "My Mouse"
[ 11826.207] (II) No input driver specified, ignoring this device.
[ 11826.207] (II) This device may have been added with another device file.
[ 11826.208] (II) config/udev: Adding input device Gaming Keyboard (/dev/input/event7)
[ 11826.208] (**) Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 11826.208] (**) Gaming Keyboard: Applying InputClass "system-keyboard"
[ 11826.208] (II) Using input driver 'libinput' for 'Gaming Keyboard'
[ 11826.208] (**) Gaming Keyboard: always reports core events
[ 11826.208] (**) Option "Device" "/dev/input/event7"
[ 11826.208] (**) Option "_source" "server/udev"
[ 11826.210] (II) event7  - Gaming Keyboard: is tagged by udev as: Keyboard
[ 11826.210] (II) event7  - Gaming Keyboard: device is a keyboard
[ 11826.210] (II) event7  - Gaming Keyboard: device removed
[ 11826.235] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb6/6-1/6-1.1/6-1.1:1.0/0003:046D:C221.0006/input/input9/event7"
[ 11826.235] (II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD, id 11)
[ 11826.235] (**) Option "xkb_layout" "us,gr"
[ 11826.235] (**) Option "xkb_variant" ",extended"
[ 11826.237] (II) event7  - Gaming Keyboard: is tagged by udev as: Keyboard
[ 11826.237] (II) event7  - Gaming Keyboard: device is a keyboard
[ 11826.238] (II) config/udev: Adding input device Gaming Keyboard Consumer Control (/dev/input/event11)
[ 11826.238] (**) Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 11826.238] (**) Gaming Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 11826.238] (II) Using input driver 'libinput' for 'Gaming Keyboard Consumer Control'
[ 11826.238] (**) Gaming Keyboard Consumer Control: always reports core events
[ 11826.238] (**) Option "Device" "/dev/input/event11"
[ 11826.238] (**) Option "_source" "server/udev"
[ 11826.239] (II) event11 - Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 11826.239] (II) event11 - Gaming Keyboard Consumer Control: device is a keyboard
[ 11826.239] (II) event11 - Gaming Keyboard Consumer Control: device removed
[ 11826.265] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb6/6-1/6-1.1/6-1.1:1.1/0003:046D:C221.0009/input/input14/event11"
[ 11826.265] (II) XINPUT: Adding extended input device "Gaming Keyboard Consumer Control" (type: KEYBOARD, id 12)
[ 11826.265] (**) Option "xkb_layout" "us,gr"
[ 11826.265] (**) Option "xkb_variant" ",extended"
[ 11826.267] (II) event11 - Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 11826.267] (II) event11 - Gaming Keyboard Consumer Control: device is a keyboard
[ 11826.268] (II) config/udev: Adding input device USB2.0 PC CAMERA: USB2.0 PC CAM (/dev/input/event18)
[ 11826.268] (**) USB2.0 PC CAMERA: USB2.0 PC CAM: Applying InputClass "libinput keyboard catchall"
[ 11826.268] (**) USB2.0 PC CAMERA: USB2.0 PC CAM: Applying InputClass "system-keyboard"
[ 11826.268] (II) Using input driver 'libinput' for 'USB2.0 PC CAMERA: USB2.0 PC CAM'
[ 11826.268] (**) USB2.0 PC CAMERA: USB2.0 PC CAM: always reports core events
[ 11826.268] (**) Option "Device" "/dev/input/event18"
[ 11826.268] (**) Option "_source" "server/udev"
[ 11826.269] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: is tagged by udev as: Keyboard
[ 11826.269] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: device is a keyboard
[ 11826.269] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: device removed
[ 11826.289] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3:1.0/input/input24/event18"
[ 11826.289] (II) XINPUT: Adding extended input device "USB2.0 PC CAMERA: USB2.0 PC CAM" (type: KEYBOARD, id 13)
[ 11826.289] (**) Option "xkb_layout" "us,gr"
[ 11826.289] (**) Option "xkb_variant" ",extended"
[ 11826.290] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: is tagged by udev as: Keyboard
[ 11826.290] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: device is a keyboard
[ 11826.291] (II) config/udev: Adding input device www.irfmedia.com  W-01RN USB_V4.0 (/dev/input/event5)
[ 11826.291] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "libinput keyboard catchall"
[ 11826.291] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "system-keyboard"
[ 11826.291] (II) Using input driver 'libinput' for 'www.irfmedia.com  W-01RN USB_V4.0'
[ 11826.291] (**) www.irfmedia.com  W-01RN USB_V4.0: always reports core events
[ 11826.291] (**) Option "Device" "/dev/input/event5"
[ 11826.291] (**) Option "_source" "server/udev"
[ 11826.292] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard
[ 11826.292] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[ 11826.292] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device removed
[ 11826.305] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.0/0003:0755:2626.0004/input/input7/event5"
[ 11826.305] (II) XINPUT: Adding extended input device "www.irfmedia.com  W-01RN USB_V4.0" (type: KEYBOARD, id 14)
[ 11826.305] (**) Option "xkb_layout" "us,gr"
[ 11826.305] (**) Option "xkb_variant" ",extended"
[ 11826.307] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard
[ 11826.307] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[ 11826.308] (II) config/udev: Adding input device www.irfmedia.com  W-01RN USB_V4.0 (/dev/input/event6)
[ 11826.308] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "libinput pointer catchall"
[ 11826.308] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "libinput keyboard catchall"
[ 11826.308] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "My Mouse"
[ 11826.308] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "system-keyboard"
[ 11826.308] (II) Using input driver 'libinput' for 'www.irfmedia.com  W-01RN USB_V4.0'
[ 11826.308] (**) www.irfmedia.com  W-01RN USB_V4.0: always reports core events
[ 11826.308] (**) Option "Device" "/dev/input/event6"
[ 11826.308] (**) Option "_source" "server/udev"
[ 11826.309] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard Mouse
[ 11826.309] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a pointer
[ 11826.309] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[ 11826.310] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device removed
[ 11826.325] (**) Option "AccelSpeed" "-1"
[ 11826.325] (II) libinput: www.irfmedia.com  W-01RN USB_V4.0: needs a virtual subdevice
[ 11826.325] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.1/0003:0755:2626.0005/input/input8/event6"
[ 11826.325] (II) XINPUT: Adding extended input device "www.irfmedia.com  W-01RN USB_V4.0" (type: MOUSE, id 15)
[ 11826.326] (**) Option "AccelerationScheme" "none"
[ 11826.326] (**) www.irfmedia.com  W-01RN USB_V4.0: (accel) selected scheme none/0
[ 11826.326] (**) www.irfmedia.com  W-01RN USB_V4.0: (accel) acceleration factor: 2.000
[ 11826.326] (**) www.irfmedia.com  W-01RN USB_V4.0: (accel) acceleration threshold: 4
[ 11826.327] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard Mouse
[ 11826.327] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a pointer
[ 11826.327] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[ 11826.328] (II) config/udev: Adding input device www.irfmedia.com  W-01RN USB_V4.0 (/dev/input/mouse2)
[ 11826.328] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "My Mouse"
[ 11826.328] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "system-keyboard"
[ 11826.328] (II) No input driver specified, ignoring this device.
[ 11826.328] (II) This device may have been added with another device file.
[ 11826.329] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse (/dev/input/event8)
[ 11826.329] (**) Full-Speed Mouse Full-Speed Mouse: Applying InputClass "libinput pointer catchall"
[ 11826.329] (**) Full-Speed Mouse Full-Speed Mouse: Applying InputClass "My Mouse"
[ 11826.329] (II) Using input driver 'libinput' for 'Full-Speed Mouse Full-Speed Mouse'
[ 11826.329] (**) Full-Speed Mouse Full-Speed Mouse: always reports core events
[ 11826.329] (**) Option "Device" "/dev/input/event8"
[ 11826.329] (**) Option "_source" "server/udev"
[ 11826.331] (II) event8  - Full-Speed Mouse Full-Speed Mouse: is tagged by udev as: Mouse
[ 11826.331] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device is a pointer
[ 11826.331] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device removed
[ 11826.357] (**) Option "AccelSpeed" "-1"
[ 11826.357] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb8/8-3/8-3:1.0/0003:062A:7227.0007/input/input10/event8"
[ 11826.357] (II) XINPUT: Adding extended input device "Full-Speed Mouse Full-Speed Mouse" (type: MOUSE, id 16)
[ 11826.357] (**) Option "AccelerationScheme" "none"
[ 11826.357] (**) Full-Speed Mouse Full-Speed Mouse: (accel) selected scheme none/0
[ 11826.357] (**) Full-Speed Mouse Full-Speed Mouse: (accel) acceleration factor: 2.000
[ 11826.357] (**) Full-Speed Mouse Full-Speed Mouse: (accel) acceleration threshold: 4
[ 11826.359] (II) event8  - Full-Speed Mouse Full-Speed Mouse: is tagged by udev as: Mouse
[ 11826.359] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device is a pointer
[ 11826.360] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse (/dev/input/mouse3)
[ 11826.360] (**) Full-Speed Mouse Full-Speed Mouse: Applying InputClass "My Mouse"
[ 11826.360] (II) No input driver specified, ignoring this device.
[ 11826.360] (II) This device may have been added with another device file.
[ 11826.361] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse (/dev/input/event9)
[ 11826.361] (II) No input driver specified, ignoring this device.
[ 11826.361] (II) This device may have been added with another device file.
[ 11826.362] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse Keyboard (/dev/input/event10)
[ 11826.362] (**) Full-Speed Mouse Full-Speed Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[ 11826.362] (**) Full-Speed Mouse Full-Speed Mouse Keyboard: Applying InputClass "system-keyboard"
[ 11826.362] (II) Using input driver 'libinput' for 'Full-Speed Mouse Full-Speed Mouse Keyboard'
[ 11826.362] (**) Full-Speed Mouse Full-Speed Mouse Keyboard: always reports core events
[ 11826.362] (**) Option "Device" "/dev/input/event10"
[ 11826.362] (**) Option "_source" "server/udev"
[ 11826.364] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: is tagged by udev as: Keyboard
[ 11826.364] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device is a keyboard
[ 11826.364] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device removed
[ 11826.386] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb8/8-3/8-3:1.1/0003:062A:7227.0008/input/input12/event10"
[ 11826.386] (II) XINPUT: Adding extended input device "Full-Speed Mouse Full-Speed Mouse Keyboard" (type: KEYBOARD, id 17)
[ 11826.386] (**) Option "xkb_layout" "us,gr"
[ 11826.386] (**) Option "xkb_variant" ",extended"
[ 11826.389] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: is tagged by udev as: Keyboard
[ 11826.389] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device is a keyboard
[ 11826.391] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse Consumer Control (/dev/input/event12)
[ 11826.391] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 11826.391] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: Applying InputClass "system-keyboard"
[ 11826.391] (II) Using input driver 'libinput' for 'Full-Speed Mouse Full-Speed Mouse Consumer Control'
[ 11826.391] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: always reports core events
[ 11826.391] (**) Option "Device" "/dev/input/event12"
[ 11826.391] (**) Option "_source" "server/udev"
[ 11826.393] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: is tagged by udev as: Keyboard
[ 11826.393] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device is a keyboard
[ 11826.393] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device removed
[ 11826.412] (II) libinput: Full-Speed Mouse Full-Speed Mouse Consumer Control: needs a virtual subdevice
[ 11826.412] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb8/8-3/8-3:1.1/0003:062A:7227.0008/input/input13/event12"
[ 11826.412] (II) XINPUT: Adding extended input device "Full-Speed Mouse Full-Speed Mouse Consumer Control" (type: MOUSE, id 18)
[ 11826.412] (**) Option "AccelerationScheme" "none"
[ 11826.412] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: (accel) selected scheme none/0
[ 11826.412] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: (accel) acceleration factor: 2.000
[ 11826.412] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: (accel) acceleration threshold: 4
[ 11826.414] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: is tagged by udev as: Keyboard
[ 11826.414] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device is a keyboard
[ 11826.415] (II) config/udev: Adding input device HID 0a5c:4502 (/dev/input/event17)
[ 11826.415] (**) HID 0a5c:4502: Applying InputClass "libinput keyboard catchall"
[ 11826.415] (**) HID 0a5c:4502: Applying InputClass "system-keyboard"
[ 11826.415] (II) Using input driver 'libinput' for 'HID 0a5c:4502'
[ 11826.415] (**) HID 0a5c:4502: always reports core events
[ 11826.415] (**) Option "Device" "/dev/input/event17"
[ 11826.415] (**) Option "_source" "server/udev"
[ 11826.417] (II) event17 - HID 0a5c:4502: is tagged by udev as: Keyboard
[ 11826.417] (II) event17 - HID 0a5c:4502: device is a keyboard
[ 11826.417] (II) event17 - HID 0a5c:4502: device removed
[ 11826.432] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.3/4-4.3.1/4-4.3.1:1.0/0003:0A5C:4502.000D/input/input23/event17"
[ 11826.432] (II) XINPUT: Adding extended input device "HID 0a5c:4502" (type: KEYBOARD, id 19)
[ 11826.432] (**) Option "xkb_layout" "us,gr"
[ 11826.432] (**) Option "xkb_variant" ",extended"
[ 11826.434] (II) event17 - HID 0a5c:4502: is tagged by udev as: Keyboard
[ 11826.434] (II) event17 - HID 0a5c:4502: device is a keyboard
[ 11826.435] (II) config/udev: Adding input device HID 0a5c:4503 Mouse (/dev/input/event19)
[ 11826.435] (**) HID 0a5c:4503 Mouse: Applying InputClass "libinput pointer catchall"
[ 11826.435] (**) HID 0a5c:4503 Mouse: Applying InputClass "My Mouse"
[ 11826.435] (II) Using input driver 'libinput' for 'HID 0a5c:4503 Mouse'
[ 11826.435] (**) HID 0a5c:4503 Mouse: always reports core events
[ 11826.435] (**) Option "Device" "/dev/input/event19"
[ 11826.436] (**) Option "_source" "server/udev"
[ 11826.437] (II) event19 - HID 0a5c:4503 Mouse: is tagged by udev as: Mouse
[ 11826.438] (II) event19 - HID 0a5c:4503 Mouse: device is a pointer
[ 11826.438] (II) event19 - HID 0a5c:4503 Mouse: device removed
[ 11826.462] (**) Option "AccelSpeed" "-1"
[ 11826.462] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.3/4-4.3.2/4-4.3.2:1.0/0003:0A5C:4503.000E/input/input25/event19"
[ 11826.462] (II) XINPUT: Adding extended input device "HID 0a5c:4503 Mouse" (type: MOUSE, id 20)
[ 11826.462] (**) Option "AccelerationScheme" "none"
[ 11826.462] (**) HID 0a5c:4503 Mouse: (accel) selected scheme none/0
[ 11826.462] (**) HID 0a5c:4503 Mouse: (accel) acceleration factor: 2.000
[ 11826.462] (**) HID 0a5c:4503 Mouse: (accel) acceleration threshold: 4
[ 11826.464] (II) event19 - HID 0a5c:4503 Mouse: is tagged by udev as: Mouse
[ 11826.464] (II) event19 - HID 0a5c:4503 Mouse: device is a pointer
[ 11826.465] (II) config/udev: Adding input device HID 0a5c:4503 Mouse (/dev/input/mouse5)
[ 11826.465] (**) HID 0a5c:4503 Mouse: Applying InputClass "My Mouse"
[ 11826.465] (II) No input driver specified, ignoring this device.
[ 11826.465] (II) This device may have been added with another device file.
[ 11826.466] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event15)
[ 11826.466] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 11826.466] (**) Logitech USB Receiver: Applying InputClass "My Mouse"
[ 11826.466] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 11826.466] (**) Logitech USB Receiver: always reports core events
[ 11826.466] (**) Option "Device" "/dev/input/event15"
[ 11826.466] (**) Option "_source" "server/udev"
[ 11826.468] (II) event15 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 11826.468] (II) event15 - Logitech USB Receiver: device set to 1000 DPI
[ 11826.468] (II) event15 - Logitech USB Receiver: device is a pointer
[ 11826.468] (II) event15 - Logitech USB Receiver: device removed
[ 11826.485] (**) Option "AccelSpeed" "-1"
[ 11826.485] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.4/4-4.4:1.0/0003:046D:C52F.000B/input/input19/event15"
[ 11826.485] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 21)
[ 11826.486] (**) Option "AccelerationScheme" "none"
[ 11826.486] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 11826.486] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 11826.486] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 11826.487] (II) event15 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 11826.487] (II) event15 - Logitech USB Receiver: device set to 1000 DPI
[ 11826.487] (II) event15 - Logitech USB Receiver: device is a pointer
[ 11826.488] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse4)
[ 11826.488] (**) Logitech USB Receiver: Applying InputClass "My Mouse"
[ 11826.488] (II) No input driver specified, ignoring this device.
[ 11826.488] (II) This device may have been added with another device file.
[ 11826.488] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event16)
[ 11826.488] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 11826.488] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[ 11826.488] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 11826.488] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 11826.488] (**) Option "Device" "/dev/input/event16"
[ 11826.489] (**) Option "_source" "server/udev"
[ 11826.490] (II) event16 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 11826.490] (II) event16 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 11826.490] (II) event16 - Logitech USB Receiver Consumer Control: device removed
[ 11826.512] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 11826.512] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.4/4-4.4:1.1/0003:046D:C52F.000C/input/input20/event16"
[ 11826.512] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 22)
[ 11826.512] (**) Option "AccelerationScheme" "none"
[ 11826.512] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 11826.512] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 11826.512] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 11826.514] (II) event16 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 11826.514] (II) event16 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 11826.514] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event26)
[ 11826.514] (II) No input driver specified, ignoring this device.
[ 11826.514] (II) This device may have been added with another device file.
[ 11826.515] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event27)
[ 11826.515] (II) No input driver specified, ignoring this device.
[ 11826.515] (II) This device may have been added with another device file.
[ 11826.515] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event28)
[ 11826.515] (II) No input driver specified, ignoring this device.
[ 11826.515] (II) This device may have been added with another device file.
[ 11826.516] (II) config/udev: Adding input device PC Speaker (/dev/input/event14)
[ 11826.516] (II) No input driver specified, ignoring this device.
[ 11826.516] (II) This device may have been added with another device file.
[ 11826.516] (II) config/udev: Adding input device G15 Extra Keys (/dev/input/event13)
[ 11826.516] (**) G15 Extra Keys: Applying InputClass "libinput keyboard catchall"
[ 11826.516] (**) G15 Extra Keys: Applying InputClass "system-keyboard"
[ 11826.516] (II) Using input driver 'libinput' for 'G15 Extra Keys'
[ 11826.516] (**) G15 Extra Keys: always reports core events
[ 11826.516] (**) Option "Device" "/dev/input/event13"
[ 11826.516] (**) Option "_source" "server/udev"
[ 11826.517] (II) event13 - G15 Extra Keys: is tagged by udev as: Keyboard
[ 11826.517] (II) event13 - G15 Extra Keys: device is a keyboard
[ 11826.517] (II) event13 - G15 Extra Keys: device removed
[ 11826.532] (**) Option "config_info" "udev:/sys/devices/virtual/input/input36/event13"
[ 11826.532] (II) XINPUT: Adding extended input device "G15 Extra Keys" (type: KEYBOARD, id 23)
[ 11826.532] (**) Option "xkb_layout" "us,gr"
[ 11826.532] (**) Option "xkb_variant" ",extended"
[ 11826.533] (II) event13 - G15 Extra Keys: is tagged by udev as: Keyboard
[ 11826.533] (II) event13 - G15 Extra Keys: device is a keyboard
[ 11826.541] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "libinput pointer catchall"
[ 11826.541] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "libinput keyboard catchall"
[ 11826.541] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "My Mouse"
[ 11826.541] (**) www.irfmedia.com  W-01RN USB_V4.0: Applying InputClass "system-keyboard"
[ 11826.541] (II) Using input driver 'libinput' for 'www.irfmedia.com  W-01RN USB_V4.0'
[ 11826.542] (**) www.irfmedia.com  W-01RN USB_V4.0: always reports core events
[ 11826.542] (**) Option "Device" "/dev/input/event6"
[ 11826.542] (**) Option "_source" "_driver/libinput"
[ 11826.542] (II) libinput: www.irfmedia.com  W-01RN USB_V4.0: is a virtual subdevice
[ 11826.542] (**) Option "AccelSpeed" "-1"
[ 11826.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.1/0003:0755:2626.0005/input/input8/event6"
[ 11826.542] (II) XINPUT: Adding extended input device "www.irfmedia.com  W-01RN USB_V4.0" (type: KEYBOARD, id 24)
[ 11826.542] (**) Option "xkb_layout" "us,gr"
[ 11826.542] (**) Option "xkb_variant" ",extended"
[ 11826.542] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 11826.542] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: Applying InputClass "system-keyboard"
[ 11826.542] (II) Using input driver 'libinput' for 'Full-Speed Mouse Full-Speed Mouse Consumer Control'
[ 11826.542] (**) Full-Speed Mouse Full-Speed Mouse Consumer Control: always reports core events
[ 11826.542] (**) Option "Device" "/dev/input/event12"
[ 11826.542] (**) Option "_source" "_driver/libinput"
[ 11826.542] (II) libinput: Full-Speed Mouse Full-Speed Mouse Consumer Control: is a virtual subdevice
[ 11826.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb8/8-3/8-3:1.1/0003:062A:7227.0008/input/input13/event12"
[ 11826.542] (II) XINPUT: Adding extended input device "Full-Speed Mouse Full-Speed Mouse Consumer Control" (type: KEYBOARD, id 25)
[ 11826.542] (**) Option "xkb_layout" "us,gr"
[ 11826.542] (**) Option "xkb_variant" ",extended"
[ 11826.542] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 11826.542] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[ 11826.542] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 11826.542] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 11826.542] (**) Option "Device" "/dev/input/event16"
[ 11826.543] (**) Option "_source" "_driver/libinput"
[ 11826.543] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 11826.543] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.4/4-4.4:1.1/0003:046D:C52F.000C/input/input20/event16"
[ 11826.543] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 26)
[ 11826.543] (**) Option "xkb_layout" "us,gr"
[ 11826.543] (**) Option "xkb_variant" ",extended"
[ 11834.420] (II) event1  - Power Button: device removed
[ 11834.442] (II) event0  - Power Button: device removed
[ 11834.529] (II) event4  - SIGMACHIP Usb Mouse: device removed
[ 11834.548] (II) event7  - Gaming Keyboard: device removed
[ 11834.572] (II) event11 - Gaming Keyboard Consumer Control: device removed
[ 11834.598] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: device removed
[ 11834.634] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device removed
[ 11834.675] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device removed
[ 11834.701] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device removed
[ 11834.746] (II) event17 - HID 0a5c:4502: device removed
[ 11834.769] (II) event19 - HID 0a5c:4503 Mouse: device removed
[ 11834.809] (II) event15 - Logitech USB Receiver: device removed
[ 11834.835] (II) event13 - G15 Extra Keys: device removed
[ 11834.878] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device removed
[ 11834.900] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device removed
[ 11834.940] (II) event16 - Logitech USB Receiver Consumer Control: device removed
[ 11834.973] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 11837.863] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 11837.990] (II) AMDGPU(0): EDID vendor "AOC", prod id 42792
[ 11837.991] (II) AMDGPU(0): Using EDID range info for horizontal sync
[ 11837.991] (II) AMDGPU(0): Using EDID range info for vertical refresh
[ 11837.991] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 11837.991] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)
[ 11837.991] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 11837.991] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11837.991] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz
[ 11838.000] (II) event1  - Power Button: is tagged by udev as: Keyboard
[ 11838.000] (II) event1  - Power Button: device is a keyboard
[ 11838.001] (II) event0  - Power Button: is tagged by udev as: Keyboard
[ 11838.001] (II) event0  - Power Button: device is a keyboard
[ 11838.003] (II) event4  - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse
[ 11838.003] (II) event4  - SIGMACHIP Usb Mouse: device is a pointer
[ 11838.004] (II) event7  - Gaming Keyboard: is tagged by udev as: Keyboard
[ 11838.004] (II) event7  - Gaming Keyboard: device is a keyboard
[ 11838.006] (II) event11 - Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 11838.006] (II) event11 - Gaming Keyboard Consumer Control: device is a keyboard
[ 11838.007] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: is tagged by udev as: Keyboard
[ 11838.007] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: device is a keyboard
[ 11838.008] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard
[ 11838.008] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[ 11838.009] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard Mouse
[ 11838.009] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a pointer
[ 11838.009] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[ 11838.011] (II) event8  - Full-Speed Mouse Full-Speed Mouse: is tagged by udev as: Mouse
[ 11838.011] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device is a pointer
[ 11838.012] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: is tagged by udev as: Keyboard
[ 11838.012] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device is a keyboard
[ 11838.013] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: is tagged by udev as: Keyboard
[ 11838.013] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device is a keyboard
[ 11838.015] (II) event17 - HID 0a5c:4502: is tagged by udev as: Keyboard
[ 11838.015] (II) event17 - HID 0a5c:4502: device is a keyboard
[ 11838.016] (II) event19 - HID 0a5c:4503 Mouse: is tagged by udev as: Mouse
[ 11838.017] (II) event19 - HID 0a5c:4503 Mouse: device is a pointer
[ 11838.018] (II) event15 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 11838.018] (II) event15 - Logitech USB Receiver: device set to 1000 DPI
[ 11838.018] (II) event15 - Logitech USB Receiver: device is a pointer
[ 11838.020] (II) event16 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 11838.020] (II) event16 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 11838.021] (II) event13 - G15 Extra Keys: is tagged by udev as: Keyboard
[ 11838.021] (II) event13 - G15 Extra Keys: device is a keyboard
[ 11843.696] (II) AMDGPU(0): EDID vendor "AOC", prod id 42792
[ 11843.696] (II) AMDGPU(0): Using hsync ranges from config file
[ 11843.696] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 11843.696] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 11843.696] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)
[ 11843.696] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 11843.696] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11843.697] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz
[ 11843.705] (II) AMDGPU(0): EDID vendor "AOC", prod id 42792
[ 11843.705] (II) AMDGPU(0): Using hsync ranges from config file
[ 11843.705] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 11843.705] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 11843.705] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)
[ 11843.705] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 11843.705] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11843.706] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz
[ 11891.177] (II) event1  - Power Button: device removed
[ 11891.199] (II) event0  - Power Button: device removed
[ 11891.266] (II) event4  - SIGMACHIP Usb Mouse: device removed
[ 11891.296] (II) event7  - Gaming Keyboard: device removed
[ 11891.324] (II) event11 - Gaming Keyboard Consumer Control: device removed
[ 11891.349] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: device removed
[ 11891.396] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device removed
[ 11891.425] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device removed
[ 11891.442] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device removed
[ 11891.473] (II) event17 - HID 0a5c:4502: device removed
[ 11891.499] (II) event19 - HID 0a5c:4503 Mouse: device removed
[ 11891.531] (II) event15 - Logitech USB Receiver: device removed
[ 11891.553] (II) event13 - G15 Extra Keys: device removed
[ 11891.572] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device removed
[ 11891.599] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device removed
[ 11891.639] (II) event16 - Logitech USB Receiver Consumer Control: device removed
[ 11891.679] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 11898.879] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 11898.903] (II) AMDGPU(0): EDID vendor "AOC", prod id 42792
[ 11898.903] (II) AMDGPU(0): Using hsync ranges from config file
[ 11898.903] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 11898.903] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 11898.903] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)
[ 11898.903] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 11898.904] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11898.905] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz
[ 11898.918] (II) event1  - Power Button: is tagged by udev as: Keyboard
[ 11898.918] (II) event1  - Power Button: device is a keyboard
[ 11898.918] (II) event0  - Power Button: is tagged by udev as: Keyboard
[ 11898.919] (II) event0  - Power Button: device is a keyboard
[ 11898.920] (II) event4  - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse
[ 11898.920] (II) event4  - SIGMACHIP Usb Mouse: device is a pointer
[ 11898.921] (II) event7  - Gaming Keyboard: is tagged by udev as: Keyboard
[ 11898.922] (II) event7  - Gaming Keyboard: device is a keyboard
[ 11898.923] (II) event11 - Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 11898.923] (II) event11 - Gaming Keyboard Consumer Control: device is a keyboard
[ 11898.924] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: is tagged by udev as: Keyboard
[ 11898.924] (II) event18 - USB2.0 PC CAMERA: USB2.0 PC CAM: device is a keyboard
[ 11898.925] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard
[ 11898.925] (II) event5  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[ 11898.927] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: is tagged by udev as: Keyboard Mouse
[ 11898.927] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a pointer
[ 11898.927] (II) event6  - www.irfmedia.com  W-01RN USB_V4.0: device is a keyboard
[ 11898.928] (II) event8  - Full-Speed Mouse Full-Speed Mouse: is tagged by udev as: Mouse
[ 11898.928] (II) event8  - Full-Speed Mouse Full-Speed Mouse: device is a pointer
[ 11898.930] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: is tagged by udev as: Keyboard
[ 11898.930] (II) event10 - Full-Speed Mouse Full-Speed Mouse Keyboard: device is a keyboard
[ 11898.931] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: is tagged by udev as: Keyboard
[ 11898.931] (II) event12 - Full-Speed Mouse Full-Speed Mouse Consumer Control: device is a keyboard
[ 11898.933] (II) event17 - HID 0a5c:4502: is tagged by udev as: Keyboard
[ 11898.933] (II) event17 - HID 0a5c:4502: device is a keyboard
[ 11898.935] (II) event19 - HID 0a5c:4503 Mouse: is tagged by udev as: Mouse
[ 11898.935] (II) event19 - HID 0a5c:4503 Mouse: device is a pointer
[ 11898.936] (II) event15 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 11898.936] (II) event15 - Logitech USB Receiver: device set to 1000 DPI
[ 11898.936] (II) event15 - Logitech USB Receiver: device is a pointer
[ 11898.938] (II) event16 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 11898.938] (II) event16 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 11898.938] (II) event13 - G15 Extra Keys: is tagged by udev as: Keyboard
[ 11898.938] (II) event13 - G15 Extra Keys: device is a keyboard

Offline

#15 2019-06-23 20:38:45

seth
Member
Registered: 2012-09-03
Posts: 50,000

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

'key…

Did you install xf86-video-amdgpu in the meantime?
Is the device section actually still required?

Online

#16 2019-06-24 00:31:26

zaxdan69
Member
Registered: 2016-06-04
Posts: 271

Re: [SOLVED]Cannot change dual monitor positions via 10-monitor.conf

No, I had it already, and I was expected to have some related info in xorg logs. I had an nvidia card before, maybe this is related. I was using arch with this card, but before 5-6 months I switched  to linux mint and I booted to arch from time to time just to update it. When I change the card with AMD R570, I installed the drivers in arch and in plasma using control center I configure the monitors. I'm sure about the driver because I also tested some games in steam and wine.
So, maybe some configuration files from nvidia created the problem, which I found the last 2 days after I switched again to arch and i3.

Last edited by zaxdan69 (2020-08-20 09:01:29)

Offline

Board footer

Powered by FluxBB