You are not logged in.

#1 2019-07-31 09:47:29

Makaveli
Member
Registered: 2017-11-14
Posts: 3

Flicker on Hybrid Graphics

Hello.
I have a problem with switchable graphics. I have an integrated intel card and discrete AMD graphics card in my laptop. I use prime switching. Both of the cards work.
My only problem is when switching from integrated card to discrete card, screen flashes for a second and then switch to the card. It happens only when starting gpu intensive apps.
I'm using Gnome on wayland with the latest current kernel.
I also recorded a video to show you the problem. For example when I issue a neofetch command, when it reads the amd card, the screen flashes like I said above. How can I get rid of flicker when AMD card is accessed.

 lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
	Subsystem: Hewlett-Packard Company 2nd Generation Core Processor Family DRAM Controller
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
	Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
	Subsystem: Hewlett-Packard Company 2nd Generation Core Processor Family Integrated Graphics Controller
	Kernel driver in use: i915
	Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family MEI Controller
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
	Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
	Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family High Definition Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
	Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
	Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
	Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
	Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset LPC Controller (rev 05)
	Subsystem: Hewlett-Packard Company HM67 Express Chipset LPC Controller
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 05)
	Subsystem: Hewlett-Packard Company 82801 Mobile SATA Controller [RAID mode]
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
	Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family SMBus Controller
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Granville [Radeon HD 6850M/6870M]
	DeviceName: ATI EG Granville
	Subsystem: Hewlett-Packard Company Radeon HD 6850M
	Kernel driver in use: radeon
	Kernel modules: radeon
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
	Subsystem: Hewlett-Packard Company Juniper HDMI Audio [Radeon HD 5700 Series]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 3e)
	DeviceName: Intel Wi-Fi Link 6200
	Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
	DeviceName: Realtek Gbe Lan Connection
	Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
	Kernel driver in use: r8169
	Kernel modules: r8169
04:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
	Subsystem: Hewlett-Packard Company uPD720200 USB 3.0 Host Controller
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
dmesg
[    0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[    0.000000] Linux version 5.2.4-arch1-1-ARCH (builduser@heftig-110826) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Sun Jul 28 10:52:46 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1e9f8bc5-d760-4fd5-84a4-15cd8015d58d rw quiet i915.fastboot=1 loglevel=3 rd.systemd.show_status=auto rd.udev.log_priority=3 vt.global_cursor_default=0 cpuidle.governor=teo i915.enable_psr=0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000943ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000094400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP ENVY 17 Notebook PC /159B, BIOS F.1C 10/31/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1995.453 MHz processor
[    0.006314] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.006319] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.006337] last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
[    0.006350] MTRR default type: uncachable
[    0.006352] MTRR fixed ranges enabled:
[    0.006357]   00000-9FFFF write-back
[    0.006359]   A0000-BFFFF uncachable
[    0.006362]   C0000-FFFFF write-protect
[    0.006364] MTRR variable ranges enabled:
[    0.006369]   0 base 000000000 mask F80000000 write-back
[    0.006373]   1 base 080000000 mask FE0000000 write-back
[    0.006376]   2 base 09D000000 mask FFF000000 uncachable
[    0.006378]   3 base 09E000000 mask FFE000000 uncachable
[    0.006381]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.006384]   5 base 100000000 mask F00000000 write-back
[    0.006387]   6 base 200000000 mask FC0000000 write-back
[    0.006390]   7 base 240000000 mask FF0000000 write-back
[    0.006393]   8 base 250000000 mask FF0000000 write-back
[    0.006395]   9 base 25FE00000 mask FFFE00000 uncachable
[    0.008607] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.008984] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.041937] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[    0.042118] check: Scanning 1 areas for low memory corruption
[    0.042124] reserving inaccessible SNB gfx pages
[    0.042139] BRK [0x210a01000, 0x210a01fff] PGTABLE
[    0.042145] BRK [0x210a02000, 0x210a02fff] PGTABLE
[    0.042149] BRK [0x210a03000, 0x210a03fff] PGTABLE
[    0.042202] BRK [0x210a04000, 0x210a04fff] PGTABLE
[    0.042207] BRK [0x210a05000, 0x210a05fff] PGTABLE
[    0.042338] BRK [0x210a06000, 0x210a06fff] PGTABLE
[    0.042455] BRK [0x210a07000, 0x210a07fff] PGTABLE
[    0.042511] BRK [0x210a08000, 0x210a08fff] PGTABLE
[    0.042591] BRK [0x210a09000, 0x210a09fff] PGTABLE
[    0.043064] RAMDISK: [mem 0x35f81000-0x36fb7fff]
[    0.043078] ACPI: Early table checksum verification disabled
[    0.043333] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.043343] ACPI: XSDT 0x000000009CFFE120 00008C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.043359] ACPI: FACP 0x000000009CFFC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.043376] ACPI: DSDT 0x000000009CFEC000 00C0E0 (v02 HP     159B     00000000 MSFT 01000013)
[    0.043386] ACPI: FACS 0x000000009CF6C000 000040
[    0.043394] ACPI: FACS 0x000000009CF6C000 000040
[    0.043402] ACPI: ASF! 0x000000009CFFD000 0000A5 (v32 HP     159B     00000001 MSFT 01000013)
[    0.043412] ACPI: HPET 0x000000009CFFB000 000038 (v01 HP     159B     00000001 MSFT 01000013)
[    0.043421] ACPI: APIC 0x000000009CFFA000 00008C (v02 HP     159B     00000001 MSFT 01000013)
[    0.043430] ACPI: MCFG 0x000000009CFF9000 00003C (v01 HP     159B     00000001 MSFT 01000013)
[    0.043439] ACPI: SLIC 0x000000009CFEB000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.043449] ACPI: WDAT 0x000000009CFEA000 000224 (v01 HP     159B     00000001 MSFT 01000013)
[    0.043458] ACPI: SSDT 0x000000009CFE9000 000D52 (v01 HP     159B     00001000 MSFT 01000013)
[    0.043467] ACPI: BOOT 0x000000009CFE7000 000028 (v01 HP     159B     00000001 MSFT 01000013)
[    0.043476] ACPI: ASPT 0x000000009CFE4000 000034 (v07 HP     159B     00000001 MSFT 01000013)
[    0.043486] ACPI: SSDT 0x000000009CFE3000 00090C (v01 HP     159B     00003000 INTL 20100121)
[    0.043495] ACPI: SSDT 0x000000009CFE2000 000996 (v01 HP     159B     00003000 INTL 20100121)
[    0.043504] ACPI: SSDT 0x000000009CFE0000 001713 (v01 HP     159B     00001000 INTL 20100121)
[    0.043531] ACPI: Local APIC address 0xfee00000
[    0.043757] No NUMA configuration found
[    0.043760] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
[    0.043770] NODE_DATA(0) allocated [mem 0x25fdf8000-0x25fdfbfff]
[    0.043843] Zone ranges:
[    0.043846]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.043849]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.043852]   Normal   [mem 0x0000000100000000-0x000000025fdfffff]
[    0.043855]   Device   empty
[    0.043858] Movable zone start for each node
[    0.043860] Early memory node ranges
[    0.043862]   node   0: [mem 0x0000000000001000-0x0000000000093fff]
[    0.043865]   node   0: [mem 0x0000000000100000-0x000000009ce3efff]
[    0.043867]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.043869]   node   0: [mem 0x0000000100000000-0x000000025fdfffff]
[    0.044082] Zeroed struct page in unavailable ranges: 12845 pages
[    0.044086] Initmem setup node 0 [mem 0x0000000000001000-0x000000025fdfffff]
[    0.044090] On node 0 totalpages: 2083795
[    0.044093]   DMA zone: 64 pages used for memmap
[    0.044095]   DMA zone: 147 pages reserved
[    0.044098]   DMA zone: 3987 pages, LIFO batch:0
[    0.044249]   DMA32 zone: 9977 pages used for memmap
[    0.044252]   DMA32 zone: 638528 pages, LIFO batch:63
[    0.070819]   Normal zone: 22520 pages used for memmap
[    0.070823]   Normal zone: 1441280 pages, LIFO batch:63
[    0.120043] Reserving Intel graphics memory at [mem 0x9da00000-0x9f9fffff]
[    0.120537] ACPI: PM-Timer IO Port: 0x408
[    0.120542] ACPI: Local APIC address 0xfee00000
[    0.120578] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.120584] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.120589] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.120593] ACPI: IRQ0 used by override.
[    0.120596] ACPI: IRQ9 used by override.
[    0.120602] Using ACPI (MADT) for SMP configuration information
[    0.120606] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.120620] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.120672] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.120676] PM: Registered nosave memory: [mem 0x00094000-0x00094fff]
[    0.120678] PM: Registered nosave memory: [mem 0x00095000-0x0009ffff]
[    0.120680] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.120682] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.120687] PM: Registered nosave memory: [mem 0x9ce3f000-0x9cebefff]
[    0.120689] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[    0.120691] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[    0.120695] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[    0.120697] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.120699] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.120701] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.120703] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.120705] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.120706] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.120708] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.120710] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.120712] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.120714] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.120716] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.120718] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.120720] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.120722] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.120727] [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.120730] Booting paravirtualized kernel on bare hardware
[    0.120737] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.493088] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.493802] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.493824] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.493827] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.493885] Built 1 zonelists, mobility grouping on.  Total pages: 2051087
[    0.493887] Policy zone: Normal
[    0.493892] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1e9f8bc5-d760-4fd5-84a4-15cd8015d58d rw quiet i915.fastboot=1 loglevel=3 rd.systemd.show_status=auto rd.udev.log_priority=3 vt.global_cursor_default=0 cpuidle.governor=teo i915.enable_psr=0
[    0.505617] Calgary: detecting Calgary via BIOS EBDA area
[    0.505621] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.559851] Memory: 8090384K/8335180K available (12291K kernel code, 1320K rwdata, 3900K rodata, 1608K init, 3616K bss, 244796K reserved, 0K cma-reserved)
[    0.559867] random: get_random_u64 called from __kmem_cache_create+0x44/0x4c0 with crng_init=0
[    0.560248] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.560280] Kernel/User page tables isolation: enabled
[    0.560322] ftrace: allocating 37376 entries in 147 pages
[    0.607205] rcu: Preemptible hierarchical RCU implementation.
[    0.607209] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.607210] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.607212] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.607215] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.607217] 	Tasks RCU enabled.
[    0.607219] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.607221] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.612881] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.613290] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.613489] Console: colour dummy device 80x25
[    0.613501] printk: console [tty0] enabled
[    0.613556] ACPI: Core revision 20190509
[    0.614030] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.614047] hpet clockevent registered
[    0.614057] APIC: Switch to symmetric I/O mode setup
[    0.614140] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.614826] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.630726] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3986ce7d584, max_idle_ns: 881590705687 ns
[    0.630737] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.19 BogoMIPS (lpj=6651510)
[    0.630743] pid_max: default: 32768 minimum: 301
[    0.630831] LSM: Security Framework initializing
[    0.630839] Yama: becoming mindful.
[    0.633920] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.635457] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.635530] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.635581] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.636023] *** VALIDATE proc ***
[    0.636167] *** VALIDATE cgroup1 ***
[    0.636171] *** VALIDATE cgroup2 ***
[    0.636312] process: using mwait in idle threads
[    0.636320] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.636323] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.636329] Spectre V2 : Mitigation: Full generic retpoline
[    0.636331] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.636332] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.636340] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.636342] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.636347] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.636355] MDS: Mitigation: Clear CPU buffers
[    0.636799] Freeing SMP alternatives memory: 32K
[    0.640939] TSC deadline timer enabled
[    0.640946] smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.660754] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.660777] ... version:                3
[    0.660779] ... bit width:              48
[    0.660781] ... generic registers:      4
[    0.660784] ... value mask:             0000ffffffffffff
[    0.660786] ... max period:             00007fffffffffff
[    0.660788] ... fixed-purpose events:   3
[    0.660790] ... event mask:             000000070000000f
[    0.667409] rcu: Hierarchical SRCU implementation.
[    0.691183] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.697426] smp: Bringing up secondary CPUs ...
[    0.737441] x86: Booting SMP configuration:
[    0.737445] .... node  #0, CPUs:      #1
[    0.742840] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.780779]  #2 #3 #4 #5 #6 #7
[    0.997076] smp: Brought up 1 node, 8 CPUs
[    0.997076] smpboot: Max logical packages: 1
[    0.997076] smpboot: Total of 8 processors activated (31940.55 BogoMIPS)
[    0.998212] devtmpfs: initialized
[    0.998212] x86/mm: Memory block size: 128MB
[    1.000900] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[    1.001077] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.001077] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.001077] pinctrl core: initialized pinctrl subsystem
[    1.001213] PM: RTC time: 09:25:28, date: 2019-07-31
[    1.001604] NET: Registered protocol family 16
[    1.001923] audit: initializing netlink subsys (disabled)
[    1.001956] audit: type=2000 audit(1564565127.386:1): state=initialized audit_enabled=0 res=1
[    1.001956] cpuidle: using governor ladder
[    1.001956] cpuidle: using governor menu
[    1.001956] cpuidle: using governor teo
[    1.001956] Simple Boot Flag at 0x44 set to 0x1
[    1.001956] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    1.001956] ACPI: bus type PCI registered
[    1.001956] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.001956] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    1.001956] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    1.001956] PCI: Using configuration type 1 for base access
[    1.001956] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    1.004077] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    1.007532] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.014420] ACPI: Added _OSI(Module Device)
[    1.014424] ACPI: Added _OSI(Processor Device)
[    1.014426] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.014429] ACPI: Added _OSI(Processor Aggregator Device)
[    1.014432] ACPI: Added _OSI(Linux-Dell-Video)
[    1.014435] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    1.014438] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    1.050055] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    1.057529] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    1.059610] ACPI: Dynamic OEM Table Load:
[    1.059633] ACPI: SSDT 0xFFFF9A7E961B6000 000727 (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    1.061683] ACPI: Dynamic OEM Table Load:
[    1.061702] ACPI: SSDT 0xFFFF9A7E96148400 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    1.062859] ACPI: Dynamic OEM Table Load:
[    1.062873] ACPI: SSDT 0xFFFF9A7E95D2BA00 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    1.069514] ACPI: EC: EC started
[    1.069517] ACPI: EC: interrupt blocked
[    1.205156] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    1.205164] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.205168] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    1.205169] ACPI: Interpreter enabled
[    1.205252] ACPI: (supports S0 S3 S4 S5)
[    1.205255] ACPI: Using IOAPIC for interrupt routing
[    1.205352] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.206001] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    1.206038] ACPI: Enabled 7 GPEs in block 00 to 3F
[    1.226101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.226118] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    1.226285] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.228122] PCI host bridge to bus 0000:00
[    1.228129] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.228133] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.228137] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.228141] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[    1.228146] pci_bus 0000:00: root bus resource [bus 00-fe]
[    1.228168] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    1.228432] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    1.228551] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.228785] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    1.228816] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    1.228831] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    1.228843] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    1.229225] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    1.229281] pci 0000:00:16.0: reg 0x10: [mem 0xc1704000-0xc170400f 64bit]
[    1.229445] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.229676] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    1.230745] pci 0000:00:1a.0: reg 0x10: [mem 0xc1709000-0xc17093ff]
[    1.234834] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.235074] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    1.235127] pci 0000:00:1b.0: reg 0x10: [mem 0xc1700000-0xc1703fff 64bit]
[    1.235315] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.235532] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    1.235753] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.235993] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    1.236212] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.236446] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    1.236664] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.236917] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    1.238088] pci 0000:00:1d.0: reg 0x10: [mem 0xc1708000-0xc17083ff]
[    1.242163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.242387] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[    1.242790] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[    1.242840] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    1.242860] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    1.242880] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    1.242900] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    1.242919] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    1.242940] pci 0000:00:1f.2: reg 0x24: [mem 0xc1707000-0xc17077ff]
[    1.243055] pci 0000:00:1f.2: PME# supported from D3hot
[    1.243253] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    1.243301] pci 0000:00:1f.3: reg 0x10: [mem 0xc1705000-0xc17050ff 64bit]
[    1.243352] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    1.243763] pci 0000:01:00.0: [1002:68a8] type 00 class 0x030000
[    1.243807] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    1.243829] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc071ffff 64bit]
[    1.243842] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    1.243866] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.243881] pci 0000:01:00.0: enabling Extended Tags
[    1.243976] pci 0000:01:00.0: supports D1 D2
[    1.244257] pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300
[    1.244305] pci 0000:01:00.1: reg 0x10: [mem 0xc0720000-0xc0723fff 64bit]
[    1.244386] pci 0000:01:00.1: enabling Extended Tags
[    1.244481] pci 0000:01:00.1: supports D1 D2
[    1.244687] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.244693] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    1.244699] pci 0000:00:01.0:   bridge window [mem 0xc0700000-0xc16fffff]
[    1.244707] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.245013] pci 0000:02:00.0: [8086:4239] type 00 class 0x028000
[    1.245400] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc0601fff 64bit]
[    1.246747] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.247379] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.247392] pci 0000:00:1c.0:   bridge window [mem 0xc0600000-0xc06fffff]
[    1.247638] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.247786] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    1.247929] pci 0000:03:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[    1.248017] pci 0000:03:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[    1.248507] pci 0000:03:00.0: supports D1 D2
[    1.248510] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.249010] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.249018] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    1.249036] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    1.249220] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    1.249287] pci 0000:04:00.0: reg 0x10: [mem 0xc0500000-0xc0501fff 64bit]
[    1.249605] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    1.249882] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    1.249896] pci 0000:00:1c.2:   bridge window [mem 0xc0500000-0xc05fffff]
[    1.251792] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.252034] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.252267] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.252499] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.252729] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.252965] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.253198] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.253428] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.254068] ACPI: EC: interrupt unblocked
[    1.254068] ACPI: EC: event unblocked
[    1.254068] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.254068] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    1.254198] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.254198] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.254198] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.254198] pci 0000:00:02.0: vgaarb: no bridge control possible
[    1.254198] pci 0000:01:00.0: vgaarb: bridge control possible
[    1.254198] vgaarb: loaded
[    1.254574] ACPI: bus type USB registered
[    1.254617] usbcore: registered new interface driver usbfs
[    1.254635] usbcore: registered new interface driver hub
[    1.254720] usbcore: registered new device driver usb
[    1.254785] pps_core: LinuxPPS API ver. 1 registered
[    1.254787] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.254794] PTP clock support registered
[    1.254825] EDAC MC: Ver: 3.0.0
[    1.255090] PCI: Using ACPI for IRQ routing
[    1.273394] PCI: pci_cache_line_size set to 64 bytes
[    1.273606] e820: reserve RAM buffer [mem 0x00094400-0x0009ffff]
[    1.273610] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff]
[    1.273614] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    1.273617] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
[    1.274070] NetLabel: Initializing
[    1.274070] NetLabel:  domain hash size = 128
[    1.274070] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.274070] NetLabel:  unlabeled traffic allowed by default
[    1.275892] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.275906] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.277540] clocksource: Switched to clocksource tsc-early
[    1.312921] VFS: Disk quotas dquot_6.6.0
[    1.312974] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.313045] *** VALIDATE hugetlbfs ***
[    1.313158] pnp: PnP ACPI init
[    1.314095] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.314101] system 00:00: [io  0x1000-0x100f] has been reserved
[    1.314106] system 00:00: [io  0x1010-0x1013] has been reserved
[    1.314110] system 00:00: [io  0xffff] has been reserved
[    1.314115] system 00:00: [io  0x0400-0x0453] has been reserved
[    1.314119] system 00:00: [io  0x0458-0x047f] has been reserved
[    1.314123] system 00:00: [io  0x0500-0x057f] has been reserved
[    1.314127] system 00:00: [io  0x164e-0x164f] has been reserved
[    1.314131] system 00:00: [io  0x0380-0x0387] has been reserved
[    1.314151] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.314233] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.314357] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.314465] pnp 00:03: Plug and Play ACPI device, IDs SYN1e34 SYN1e00 SYN0002 PNP0f13 (active)
[    1.315134] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.315139] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.315144] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.315148] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.315153] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    1.315157] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.315161] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.315167] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    1.315171] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.315176] system 00:04: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    1.315189] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.315964] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
[    1.315969] system 00:05: [mem 0x40000000-0x401fffff] could not be reserved
[    1.315982] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.316048] pnp: PnP ACPI: found 6 devices
[    1.325554] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.325566] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    1.325596] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0740000-0xc075ffff pref]
[    1.325602] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.325608] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    1.325616] pci 0000:00:01.0:   bridge window [mem 0xc0700000-0xc16fffff]
[    1.325622] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.325632] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.325643] pci 0000:00:1c.0:   bridge window [mem 0xc0600000-0xc06fffff]
[    1.325661] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.325667] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    1.325682] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    1.325695] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    1.325706] pci 0000:00:1c.2:   bridge window [mem 0xc0500000-0xc05fffff]
[    1.325725] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.325730] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.325734] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.325738] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[    1.325741] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.325745] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc16fffff]
[    1.325749] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    1.325753] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
[    1.325757] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.325761] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[    1.325765] pci_bus 0000:04: resource 1 [mem 0xc0500000-0xc05fffff]
[    1.326022] NET: Registered protocol family 2
[    1.326419] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    1.326527] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.326941] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.327272] TCP: Hash tables configured (established 65536 bind 65536)
[    1.327370] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.327483] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.327707] NET: Registered protocol family 1
[    1.327721] NET: Registered protocol family 44
[    1.327750] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.344362] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x63a took 16195 usecs
[    1.361002] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x63a took 16207 usecs
[    1.373556] pci 0000:04:00.0: quirk_usb_early_handoff+0x0/0x63a took 12076 usecs
[    1.373564] PCI: CLS 64 bytes, default 64
[    1.373670] Trying to unpack rootfs image as initramfs...
[    2.055106] Freeing initrd memory: 16604K
[    2.055113] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.055118] software IO TLB: mapped [mem 0x98e3f000-0x9ce3f000] (64MB)
[    2.055423] check: Scanning for low memory corruption every 60 seconds
[    2.057295] Initialise system trusted keyrings
[    2.057321] Key type blacklist registered
[    2.057470] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    2.061565] zbud: loaded
[    2.066870] Key type asymmetric registered
[    2.066874] Asymmetric key parser 'x509' registered
[    2.066900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    2.067020] io scheduler mq-deadline registered
[    2.067023] io scheduler kyber registered
[    2.067141] io scheduler bfq registered
[    2.069332] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.069544] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    2.069547] vesafb: scrolling: redraw
[    2.069551] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.069588] vesafb: framebuffer at 0xb0000000, mapped to 0x(____ptrval____), using 5120k, total 5120k
[    2.069694] fbcon: Deferring console take-over
[    2.069697] fb0: VESA VGA frame buffer device
[    2.069738] intel_idle: MWAIT substates: 0x21120
[    2.069741] intel_idle: v0.4.1 model 0x2A
[    2.070878] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.071011] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.071035] ACPI: Lid Switch [LID0]
[    2.071135] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.071154] ACPI: Power Button [PWRB]
[    2.071287] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.074213] ACPI: Power Button [PWRF]
[    2.079199] [Firmware Bug]: Invalid critical threshold (0)
[    2.085582] thermal LNXTHERM:00: registered as thermal_zone0
[    2.085586] ACPI: Thermal Zone [TZ01] (70 C)
[    2.086156] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.089738] usbcore: registered new interface driver usbserial_generic
[    2.089752] usbserial: USB Serial support registered for generic
[    2.089799] rtc_cmos 00:01: RTC can wake from S4
[    2.090039] rtc_cmos 00:01: registered as rtc0
[    2.090081] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.090226] intel_pstate: Intel P-state driver initializing
[    2.090905] ledtrig-cpu: registered to indicate activity on CPUs
[    2.091556] NET: Registered protocol family 10
[    2.114691] Segment Routing with IPv6
[    2.114757] NET: Registered protocol family 17
[    2.116160] mce: Using 9 MCE banks
[    2.116199] RAS: Correctable Errors collector initialized.
[    2.116314] microcode: sig=0x206a7, pf=0x10, revision=0x2f
[    2.116562] microcode: Microcode Update Driver: v2.2.
[    2.116590] sched_clock: Marking stable (2115799480, 746638)->(2597834415, -481288297)
[    2.117292] registered taskstats version 1
[    2.117310] Loading compiled-in X.509 certificates
[    2.130918] Loaded X.509 cert 'Build time autogenerated kernel key: 0fc84e187f26daec868ab2fe4147467bccfe3774'
[    2.130989] zswap: loaded using pool lzo/zbud
[    2.152715] Key type big_key registered
[    2.153737] PM:   Magic number: 11:663:425
[    2.153926] rtc_cmos 00:01: setting system clock to 2019-07-31T09:25:29 UTC (1564565129)
[    2.159050] Freeing unused decrypted memory: 2040K
[    2.159944] Freeing unused kernel image memory: 1608K
[    2.200976] Write protecting the kernel read-only data: 18432k
[    2.202632] Freeing unused kernel image memory: 2012K
[    2.203026] Freeing unused kernel image memory: 196K
[    2.236872] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.236876] x86/mm: Checking user space page tables
[    2.269970] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.269975] Run /init as init process
[    2.335547] Linux agpgart interface v0.103
[    2.605220] Setting dangerous option enable_psr - tainting kernel
[    2.607014] checking generic (b0000000 500000) vs hw (b0000000 10000000)
[    2.607018] fb0: switching to inteldrmfb from VESA VGA
[    2.607251] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.610128] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.610130] [drm] Driver supports precise vblank timestamp query.
[    2.612926] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    2.642902] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0
[    2.643691] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.644305] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:00/input/input3
[    2.647217] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.647717] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
[    2.666845] fbcon: i915drmfb (fb0) is primary device
[    2.666848] fbcon: Deferring console take-over
[    2.666857] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    2.830629] [drm] radeon kernel modesetting enabled.
[    2.830685] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    2.831075] ATPX version 1, functions 0x00000087
[    2.831392] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xa0000000 -> 0xafffffff
[    2.831397] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xc0700000 -> 0xc071ffff
[    2.831429] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    2.832158] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68A8 0x103C:0x159B 0x00).
[    2.832197] vga_switcheroo: enabled
[    3.067479] tsc: Refined TSC clocksource calibration: 1995.467 MHz
[    3.067500] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3986e85801c, max_idle_ns: 881590625023 ns
[    3.067577] clocksource: Switched to clocksource tsc
[    3.084763] ATOM BIOS: HP
[    3.084873] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    3.084879] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    3.084892] [drm] Detected VRAM RAM=1024M, BAR=256M
[    3.084895] [drm] RAM width 128bits DDR
[    3.085199] [TTM] Zone  kernel: Available graphics memory: 4056438 KiB
[    3.085202] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    3.085203] [TTM] Initializing pool allocator
[    3.085214] [TTM] Initializing DMA pool allocator
[    3.085256] [drm] radeon: 1024M of VRAM memory ready
[    3.085258] [drm] radeon: 1024M of GTT memory ready.
[    3.085278] [drm] Loading JUNIPER Microcode
[    3.085463] [drm] Internal thermal controller with fan control
[    3.091141] [drm] radeon: dpm initialized
[    3.091288] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    3.092959] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    3.106023] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[    3.106186] radeon 0000:01:00.0: WB enabled
[    3.106193] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(____ptrval____)
[    3.106197] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(____ptrval____)
[    3.106576] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x(____ptrval____)
[    3.106580] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.106582] [drm] Driver supports precise vblank timestamp query.
[    3.106585] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    3.106676] radeon 0000:01:00.0: radeon: using MSI.
[    3.106731] [drm] radeon: irq initialized.
[    3.123836] [drm] ring test on 0 succeeded in 1 usecs
[    3.123847] [drm] ring test on 3 succeeded in 3 usecs
[    3.301627] [drm] ring test on 5 succeeded in 2 usecs
[    3.301634] [drm] UVD initialized successfully.
[    3.301941] [drm] ib test on ring 0 succeeded in 0 usecs
[    3.302020] [drm] ib test on ring 3 succeeded in 0 usecs
[    3.974380] [drm] ib test on ring 5 succeeded
[    3.976116] [drm] Radeon Display Connectors
[    3.976119] [drm] Connector 0:
[    3.976121] [drm]   DP-3
[    3.976123] [drm]   HPD2
[    3.976127] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    3.976129] [drm]   Encoders:
[    3.976131] [drm]     DFP1: INTERNAL_UNIPHY2
[    3.976133] [drm] Connector 1:
[    3.976134] [drm]   HDMI-A-3
[    3.976136] [drm]   HPD1
[    3.976139] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    3.976141] [drm]   Encoders:
[    3.976142] [drm]     DFP2: INTERNAL_UNIPHY1
[    3.976144] [drm] Connector 2:
[    3.976146] [drm]   VGA-2
[    3.976150] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    3.976151] [drm]   Encoders:
[    3.976153] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    4.144599] [drm] Cannot find any crtc or sizes
[    4.145557] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[    4.338260] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.349335] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.349492] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.354815] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.359732] ehci-pci: EHCI PCI platform driver
[    4.360281] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    4.360305] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.360339] ehci-pci 0000:00:1a.0: debug port 2
[    4.364296] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    4.364358] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1709000
[    4.377494] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.377733] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    4.377743] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.377751] usb usb1: Product: EHCI Host Controller
[    4.377758] usb usb1: Manufacturer: Linux 5.2.4-arch1-1-ARCH ehci_hcd
[    4.377764] usb usb1: SerialNumber: 0000:00:1a.0
[    4.378269] hub 1-0:1.0: USB hub found
[    4.378308] hub 1-0:1.0: 2 ports detected
[    4.379386] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    4.379408] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.379433] ehci-pci 0000:00:1d.0: debug port 2
[    4.383364] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    4.383403] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc1708000
[    4.385351] SCSI subsystem initialized
[    4.397442] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.397573] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    4.397578] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.397582] usb usb2: Product: EHCI Host Controller
[    4.397586] usb usb2: Manufacturer: Linux 5.2.4-arch1-1-ARCH ehci_hcd
[    4.397589] usb usb2: SerialNumber: 0000:00:1d.0
[    4.397971] hub 2-0:1.0: USB hub found
[    4.397992] hub 2-0:1.0: 2 ports detected
[    4.398565] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    4.398598] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    4.398795] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[    4.399596] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    4.399602] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.399606] usb usb3: Product: xHCI Host Controller
[    4.399609] usb usb3: Manufacturer: Linux 5.2.4-arch1-1-ARCH xhci-hcd
[    4.399613] usb usb3: SerialNumber: 0000:04:00.0
[    4.400030] hub 3-0:1.0: USB hub found
[    4.400073] hub 3-0:1.0: 2 ports detected
[    4.400533] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    4.400543] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    4.400552] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[    4.402262] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.402390] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[    4.402399] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.402405] usb usb4: Product: xHCI Host Controller
[    4.402412] usb usb4: Manufacturer: Linux 5.2.4-arch1-1-ARCH xhci-hcd
[    4.402418] usb usb4: SerialNumber: 0000:04:00.0
[    4.402890] hub 4-0:1.0: USB hub found
[    4.402924] hub 4-0:1.0: 2 ports detected
[    4.422257] libata version 3.00 loaded.
[    4.436358] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    4.437339] ahci 0000:00:1f.2: version 3.0
[    4.437952] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    4.448074] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl RAID mode
[    4.448081] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    4.469249] scsi host0: ahci
[    4.469883] scsi host1: ahci
[    4.470281] scsi host2: ahci
[    4.470603] scsi host3: ahci
[    4.470935] scsi host4: ahci
[    4.471266] scsi host5: ahci
[    4.471453] ata1: SATA max UDMA/133 abar m2048@0xc1707000 port 0xc1707100 irq 38
[    4.471456] ata2: DUMMY
[    4.471458] ata3: DUMMY
[    4.471460] ata4: DUMMY
[    4.471465] ata5: SATA max UDMA/133 abar m2048@0xc1707000 port 0xc1707300 irq 38
[    4.471469] ata6: SATA max UDMA/133 abar m2048@0xc1707000 port 0xc1707380 irq 38
[    4.707527] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.727524] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.785465] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.797301] ata1.00: ATA-8: MKNSSDCR120GB, 502ABBF0, max UDMA/133
[    4.797308] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.807264] ata1.00: configured for UDMA/133
[    4.807965] scsi 0:0:0:0: Direct-Access     ATA      MKNSSDCR120GB    BBF0 PQ: 0 ANSI: 5
[    4.854801] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    4.854808] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.855391] hub 1-1:1.0: USB hub found
[    4.855537] hub 1-1:1.0: 6 ports detected
[    4.874601] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    4.874608] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.875230] hub 2-1:1.0: USB hub found
[    4.875302] hub 2-1:1.0: 8 ports detected
[    5.121976] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.125780] ata5.00: ATAPI: hp DVDWBD TS-TB23L, HH02, max UDMA/100
[    5.131723] ata5.00: configured for UDMA/100
[    5.134194] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    5.136209] scsi 4:0:0:0: CD-ROM            hp       DVDWBD TS-TB23L  HH02 PQ: 0 ANSI: 5
[    5.154099] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    5.234123] usb 1-1.1: New USB device found, idVendor=413c, idProduct=3010, bcdDevice= 2.20
[    5.234130] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.248172] hidraw: raw HID events driver (C) Jiri Kosina
[    5.258217] usbcore: registered new interface driver usbhid
[    5.258220] usbhid: USB HID core driver
[    5.263667] input: HID 413c:3010 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:3010.0001/input/input7
[    5.263799] hid-generic 0003:413C:3010.0001: input,hidraw0: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1a.0-1.1/input0
[    5.307475] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[    5.354547] [drm] Cannot find any crtc or sizes
[    5.363316] usb 2-1.5: New USB device found, idVendor=064e, idProduct=c210, bcdDevice= 1.11
[    5.363323] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.363328] usb 2-1.5: Product: HP ENVY HD Webcam
[    5.363332] usb 2-1.5: Manufacturer: SuYin
[    5.363335] usb 2-1.5: SerialNumber: HF1014-P80A-OV05-VH-R01.01.01
[    5.408539] usb 1-1.6: New USB device found, idVendor=03f0, idProduct=231d, bcdDevice= 3.06
[    5.408545] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.408549] usb 1-1.6: Product: HP Integrated Module
[    5.408553] usb 1-1.6: Manufacturer: Broadcom Corp
[    5.481982] ata6: SATA link down (SStatus 0 SControl 300)
[    5.499677] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    5.499766] sd 0:0:0:0: [sda] Write Protect is off
[    5.499772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.499883] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.503559]  sda: sda1 sda2 sda3 sda4 sda5
[    5.505071] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.540277] random: fast init done
[    5.582295] sr 4:0:0:0: [sr0] scsi3-mmc drive: 0x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.582302] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.583171] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    6.092702] fbcon: Taking over console
[    6.099721] Console: switching to colour frame buffer device 240x67
[    6.245077] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    6.464363] systemd[1]: systemd 242.84-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    6.480914] systemd[1]: Detected architecture x86-64.
[    6.490218] systemd[1]: Set hostname to <archlinux>.
[    6.820371] random: systemd: uninitialized urandom read (16 bytes read)
[    6.820609] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.820713] random: systemd: uninitialized urandom read (16 bytes read)
[    6.820911] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.820967] random: systemd: uninitialized urandom read (16 bytes read)
[    6.821233] systemd[1]: Listening on udev Control Socket.
[    6.825010] systemd[1]: Created slice system-getty.slice.
[    6.825196] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.825792] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.826215] systemd[1]: Listening on Journal Audit Socket.
[    6.852644] EXT4-fs (sda3): re-mounted. Opts: (null)
[    6.883433] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.883623] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    7.747677] audit: type=1130 audit(1564565135.090:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.775043] systemd-journald[332]: Received request to flush runtime journal from PID 1
[    7.827916] audit: type=1130 audit(1564565135.170:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.854068] audit: type=1130 audit(1564565135.193:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.966912] input: HP Wireless hotkeys as /devices/virtual/input/input8
[    7.967702] ACPI: AC Adapter [ACAD] (on-line)
[    8.023560] hp_accel: laptop model unknown, using default axes configuration
[    8.035848] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    8.048245] lis3lv02d: 8 bits 3DC sensor found
[    8.097697] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[    8.101076] battery: ACPI: Battery Slot [BAT0] (battery present)
[    8.101859] audit: type=1130 audit(1564565135.443:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.129855] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    8.130007] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190509/utaddress-204)
[    8.130022] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.130030] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190509/utaddress-204)
[    8.130040] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190509/utaddress-204)
[    8.130049] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.WMID.GPIO) (20190509/utaddress-204)
[    8.130057] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20190509/utaddress-204)
[    8.130065] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.130068] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190509/utaddress-204)
[    8.130076] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190509/utaddress-204)
[    8.130084] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.WMID.GPIO) (20190509/utaddress-204)
[    8.130092] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20190509/utaddress-204)
[    8.130100] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.130102] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190509/utaddress-204)
[    8.130110] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190509/utaddress-204)
[    8.130118] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.WMID.GPIO) (20190509/utaddress-204)
[    8.130127] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20190509/utaddress-204)
[    8.130134] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.130136] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.180883] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    8.180891] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    8.180895] RAPL PMU: hw unit of domain package 2^-16 Joules
[    8.180899] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    8.191565] input: PC Speaker as /devices/platform/pcspkr/input/input10
[    8.209175] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    8.289152] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    8.304217] libphy: r8169: probed
[    8.305260] r8169 0000:03:00.0 eth0: RTL8168e/8111e, 10:1f:74:be:bf:a8, XID 2c2, IRQ 40
[    8.305272] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    8.323004] mousedev: PS/2 mouse device common for all mice
[    8.369290] media: Linux media interface: v0.10
[    8.390486] cryptd: max_cpu_qlen set to 1000
[    8.564790] Adding 10485756k swap on /dev/sda2.  Priority:-2 extents:1 across:10485756k SSFS
[    8.565081] iTCO_vendor_support: vendor-support=0
[    8.588751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.588892] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    8.591590] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.593151] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D128] at bit offset/length 16/1024 exceeds size of target Buffer (160 bits) (20190509/dsopcode-198)
[    8.593207] ACPI Error: Aborting method \_SB.WMID.HWMC due to previous error (AE_AML_BUFFER_LIMIT) (20190509/psparse-529)
[    8.597079] ACPI Error: Aborting method \_SB.WMID.WMAD due to previous error (AE_AML_BUFFER_LIMIT) (20190509/psparse-529)
[    8.597569] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D128] at bit offset/length 16/1024 exceeds size of target Buffer (160 bits) (20190509/dsopcode-198)
[    8.597613] ACPI Error: Aborting method \_SB.WMID.HWMC due to previous error (AE_AML_BUFFER_LIMIT) (20190509/psparse-529)
[    8.604145] ACPI Error: Aborting method \_SB.WMID.WMAD due to previous error (AE_AML_BUFFER_LIMIT) (20190509/psparse-529)
[    8.610559] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D128] at bit offset/length 16/1024 exceeds size of target Buffer (160 bits) (20190509/dsopcode-198)
[    8.610606] ACPI Error: Aborting method \_SB.WMID.HWMC due to previous error (AE_AML_BUFFER_LIMIT) (20190509/psparse-529)
[    8.614237] ACPI Error: Aborting method \_SB.WMID.WMAD due to previous error (AE_AML_BUFFER_LIMIT) (20190509/psparse-529)
[    8.631238] input: HP WMI hotkeys as /devices/virtual/input/input12
[    8.632230] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D128] at bit offset/length 16/1024 exceeds size of target Buffer (160 bits) (20190509/dsopcode-198)
[    8.632259] ACPI Error: Aborting method \_SB.WMID.HWMC due to previous error (AE_AML_BUFFER_LIMIT) (20190509/psparse-529)
[    8.637520] ACPI Error: Aborting method \_SB.WMID.WMAD due to previous error (AE_AML_BUFFER_LIMIT) (20190509/psparse-529)
[    8.638030] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D128] at bit offset/length 16/1024 exceeds size of target Buffer (160 bits) (20190509/dsopcode-198)
[    8.638067] ACPI Error: Aborting method \_SB.WMID.HWMC due to previous error (AE_AML_BUFFER_LIMIT) (20190509/psparse-529)
[    8.638144] ACPI Error: Aborting method \_SB.WMID.WMAD due to previous error (AE_AML_BUFFER_LIMIT) (20190509/psparse-529)
[    8.648490] videodev: Linux video capture interface: v2.00
[    8.649196] AVX version of gcm_enc/dec engaged.
[    8.649200] AES CTR mode by8 optimization enabled
[    8.709732] Bluetooth: Core ver 2.22
[    8.709782] NET: Registered protocol family 31
[    8.709786] Bluetooth: HCI device and connection manager initialized
[    8.709799] Bluetooth: HCI socket layer initialized
[    8.709807] Bluetooth: L2CAP socket layer initialized
[    8.709821] Bluetooth: SCO socket layer initialized
[    8.711054] r8169 0000:03:00.0 eno1: renamed from eth0
[    8.732513] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.733283] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    8.804401] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.818769] usbcore: registered new interface driver btusb
[    8.825530] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    8.854624] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.856969] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    8.856978] cfg80211: failed to load regulatory.db
[    8.860421] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    8.860434] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.860443] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    8.860448] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    8.860454] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    8.860462] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    8.860469] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[    8.890763] audit: type=1130 audit(1564565136.230:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.906738] uvcvideo: Found UVC 1.00 device HP ENVY HD Webcam (064e:c210)
[    8.912731] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    8.912979] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    8.913202] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    8.913435] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    8.913732] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    8.992486] Intel(R) Wireless WiFi driver for Linux
[    8.992491] Copyright(c) 2003- 2015 Intel Corporation
[    8.993067] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    8.997874] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[    8.997934] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[    9.000788] iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[    9.076138] uvcvideo 2-1.5:1.0: Entity type for entity Extension 3 was not initialized!
[    9.076148] uvcvideo 2-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[    9.076155] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[    9.076452] input: HP ENVY HD Webcam: HP ENVY HD W as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input19
[    9.076739] usbcore: registered new interface driver uvcvideo
[    9.076743] USB Video Class driver (1.1.1)
[    9.175215] psmouse serio1: synaptics: queried max coordinates: x [..5672], y [..4550]
[    9.256287] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0x5a0400/0x0, board id: 0, fw id: 648573
[    9.306949] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[    9.405324] intel_rapl: Found RAPL domain package
[    9.405332] intel_rapl: Found RAPL domain core
[    9.405337] intel_rapl: Found RAPL domain uncore
[    9.405352] intel_rapl: RAPL package 0 domain package locked by BIOS
[    9.460609] audit: type=1130 audit(1564565136.800:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.461837] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled
[    9.461843] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    9.461846] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    9.461851] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[    9.521171] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    9.526812] iwlwifi 0000:02:00.0 wlo1: renamed from wlan0
[    9.618993] audit: type=1130 audit(1564565136.960:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation-early comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.619005] audit: type=1131 audit(1564565136.960:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation-early comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.725239] audit: type=1130 audit(1564565137.067:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.725267] audit: type=1131 audit(1564565137.067:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.732065] random: crng init done
[   10.732076] random: 7 urandom warning(s) missed due to ratelimiting
[   10.838225] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.838233] Bluetooth: BNEP filters: protocol multicast
[   10.838244] Bluetooth: BNEP socket layer initialized
[   11.813271] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[   12.031556] r8169 0000:03:00.0 eno1: Link is Down
[   12.052752] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[   12.293608] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[   12.407551] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[   12.649731] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[   12.952055] kauditd_printk_skb: 22 callbacks suppressed
[   12.952063] audit: type=1130 audit(1564565140.293:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.511170] audit: type=1131 audit(1564565141.853:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.112785] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[   16.353797] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[   18.252290] audit: type=1130 audit(1564565145.593:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.822146] audit: type=1130 audit(1564565146.163:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.039775] audit: type=1130 audit(1564565146.380:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.669133] Bluetooth: RFCOMM TTY layer initialized
[   19.669157] Bluetooth: RFCOMM socket layer initialized
[   19.669172] Bluetooth: RFCOMM ver 1.11
[   19.755557] wlo1: authenticate with 58:8b:f3:7d:0d:58
[   19.785866] wlo1: send auth to 58:8b:f3:7d:0d:58 (try 1/3)
[   19.789051] wlo1: authenticated
[   19.789188] wlo1: waiting for beacon from 58:8b:f3:7d:0d:58
[   19.884090] wlo1: associate with 58:8b:f3:7d:0d:58 (try 1/3)
[   19.889963] wlo1: RX AssocResp from 58:8b:f3:7d:0d:58 (capab=0x411 status=0 aid=8)
[   19.892604] wlo1: associated
[   19.905884] audit: type=1130 audit(1564565147.247:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=colord comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.935208] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   20.200529] audit: type=1130 audit(1564565147.540:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.246405] wireguard: loading out-of-tree module taints kernel.
[   20.246500] wireguard: module verification failed: signature and/or required key missing - tainting kernel
[   20.248762] wireguard: WireGuard 0.0.20190702 loaded. See www.wireguard.com for information.
[   20.248764] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   20.564009] audit: type=1130 audit(1564565147.903:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wg-quick@mullvadde4nl3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.006898] audit: type=1131 audit(1564565149.347:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.252248] audit: type=1006 audit(1564565152.593:43): pid=969 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   25.286429] audit: type=1130 audit(1564565152.627:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.294048] audit: type=1006 audit(1564565152.633:45): pid=977 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   25.395252] audit: type=1130 audit(1564565152.737:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.422475] audit: type=1112 audit(1564565152.763:47): pid=969 uid=0 auid=1000 ses=2 msg='uid=1000 exe="/usr/lib/gdm-session-worker" hostname=? addr=? terminal=? res=success'
[   27.871596] fuse: init (API version 7.31)
[   28.261867] audit: type=1130 audit(1564565155.603:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   28.583547] rfkill: input handler disabled
[   28.609849] audit: type=1130 audit(1564565155.950:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=org.cups.cupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.249576] audit: type=1131 audit(1564565173.554:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.264753] audit: type=1131 audit(1564565173.571:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   59.312046] audit: type=1131 audit(1564565186.586:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   59.407497] audit: type=1131 audit(1564565186.679:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   62.110794] powercap intel-rapl:0: package locked by BIOS, monitoring only
[   79.091733] audit: type=1131 audit(1564565206.359:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   98.251197] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   98.256799] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[   98.256886] radeon 0000:01:00.0: WB enabled
[   98.256889] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000f4eee075
[   98.256890] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000cc48ad82
[   98.257257] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0000000028b0e77a
[   98.273522] [drm] ring test on 0 succeeded in 1 usecs
[   98.273528] [drm] ring test on 3 succeeded in 3 usecs
[   98.450626] [drm] ring test on 5 succeeded in 2 usecs
[   98.450632] [drm] UVD initialized successfully.
[   98.450703] [drm] ib test on ring 0 succeeded in 0 usecs
[   98.450774] [drm] ib test on ring 3 succeeded in 0 usecs
[   99.118051] [drm] ib test on ring 5 succeeded

Video: https://gph.is/g/Zx17oql


Thank you

Offline

#2 2019-08-02 00:54:40

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 11,868

Re: Flicker on Hybrid Graphics

As far as I know PRIME is a technique designed for X, maybe the flicker is due to switching from a wayland session to a Xwayland session ?

Last edited by Lone_Wolf (2019-08-02 00:55:06)


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.


(A works at time B)  && (time C > time B ) ≠  (A works at time C)

Offline

#3 2019-08-06 09:49:23

Makaveli
Member
Registered: 2017-11-14
Posts: 3

Re: Flicker on Hybrid Graphics

When I use radeon.runpm=0 kernel parameter, the problem is resolved. However I think there is a bug in mutter because when I boot it with this parameter, gdm does not work properly and I cannot login. It works in other desktop environments.

Offline

Board footer

Powered by FluxBB