You are not logged in.

Pages: 1

#1 2019-08-05 23:57:17

Aembra
Member
Registered: 2019-08-05
Posts: 5

Sound plays for a second but then cuts off.

What's the problem?

    After booting, when I open any audio (I've tried: YouTube, Spotify and local file on Rhythmbox) it just plays for a second or so and then the audio cuts off.

Info about my system

  • I use alsa.

  • I have pulseaudio and pavucontrol installed.

  • My ALSA info

  • aplay -l

  • pacmd list-cards

  • lscpi -nn

  • User is in audio group (I ran "sudo gpasswd -a <my username> audio")

  • No sound comes out when I run speaker test

  • /etc/asound.conf

  • pacmd list-sink-inputs

  • alsamixer

  • pavucontrol when playing audio on Firefox

  • Some short outputs not worth to put on paste.ubuntu.com. 

    > cat /proc/asound/cards
 0 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0x94420000 irq 134
> amixer scontrols
Simple mixer control 'Master',0
Simple mixer control 'Headphone',0
Simple mixer control 'Speaker',0
Simple mixer control 'PCM',0
Simple mixer control 'Mic Boost',0
Simple mixer control 'IEC958',0
Simple mixer control 'IEC958',1
Simple mixer control 'IEC958',2
Simple mixer control 'IEC958',3
Simple mixer control 'IEC958',4
Simple mixer control 'Beep',0
Simple mixer control 'Capture',0
Simple mixer control 'Auto-Mute Mode',0
Simple mixer control 'Internal Mic Boost',0
> cat /proc/asound/modules
 0 snd_hda_intel
> pacman -Qs | grep "alsa"
local/alsa-lib 1.1.9-1
local/alsa-plugins 1.1.9-2
    Extra alsa plugins
local/alsa-utils 1.1.9-1
local/zita-alsa-pcmi 0.3.2-1
    The successor of clalsadrv, provides easy access to ALSA PCM devices.

What I've tried (file edits done independently)

  • I checked alsamixer, unmuted everything and disabled auto-mute. Then I ran "sudo alsactl store".

  • I used pulsemixer and set all the audio levels to 100.

  • I put the following in /etc/asound.conf

    defaults.pcm.card 0
defaults.pcm.device 0
defaults.ctl.card 0

  • I put the following in ~/.asoundrc (I honestly don't know what I was thinking. For my defense I was desperately trying to play the new Mindhunter trailer.)

    pcm_slave.slavej {
  pcm "hw:0"
  channels 2
  rate 44100
}
pcm.plugj {
  type plug
  slave slavej
}

  • I put the following in ~/.asoundrc (Again, desperate.)

    pcm.!default {
        type hw
        card 1
}

ctl.!default {
        type hw
        card 0
}

  • I ran the following commands

    $ asoundconf list
$ asoundconf set-default-card PCH

  • I ran asoundconf-gtk and set the default sound card to PCH (CX20756 Analog).

This might be too long but I've tried to include as much detail as possible. How should I go about solving this?

Last edited by Aembra (2019-08-06 08:07:09)

Offline

#2 2019-08-06 07:27:39

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,423

Re: Sound plays for a second but then cuts off.

Please only post thumbnails or links to images. In terms of detail the post is nice, it's almost always better to provide more than too little information.

You seem to have a mess of configuration right now. If you use pulse there's no use, and it is often counter productive to have this much ALSA specific configuration. Remove all your ~/.asoundrc, ~/.asoundrc.asoundconf and /etc/asound.conf install pulseaudio-alsa instead, restart pulse 

systemctl --user restart pulseaudio
#Start firefox, start playback, post 
pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs
sudo fuser -v /dev/snd/*

Last edited by V1del (2019-08-06 07:28:32)

Offline

#3 2019-08-06 08:17:09

Aembra
Member
Registered: 2019-08-05
Posts: 5

Re: Sound plays for a second but then cuts off.

  • pacmd list-cards

    1 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1f.3>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0x94420000 irq 134"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d70"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: unknown)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: unknown)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: unknown)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
		output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5765, available: unknown)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
		output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: unknown)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
		output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (priority 5765, available: unknown)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
		output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) Output + Analog Stereo Input (priority 5765, available: unknown)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1f.3.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"

  • pacmd list-sinks

    1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 22.55 ms
	max request: 4 KiB
	max rewind: 4 KiB
	monitor source: 0
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 25.00 ms; range is 0.50 .. 1837.50 ms
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "CX20756 Analog"
		alsa.id = "CX20756 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0x94420000 irq 134"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d70"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Conexant CX20756"
		alsa.components = "HDA:14f15114,1179f841,00100100 HDA:80862809,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>

  • pacmd list-sink-inputs

    1 sink input(s) available.
    index: 0
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_00_1f.3.analog-stereo>
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 55.33 ms
	requested latency: 25.00 ms
	sample spec: float32le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	resample method: copy
	module: 9
	client: 4 <AudioIPC Server>
	properties:
		media.name = "AudioStream"
		application.name = "AudioIPC Server"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "663"
		application.process.user = "doctor"
		application.process.host = "tardis"
		application.process.binary = "firefox"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "9139f1205a5e4a31aef70ea01868db5b"
		application.process.session_id = "2"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:AudioIPC Server"

  • sudo fuser -v /dev/snd/*

                         USER        PID ACCESS COMMAND
/dev/snd/controlC0:  doctor     1085 F.... pulseaudio
/dev/snd/pcmC0D0p:   doctor     1085 F...m pulseaudio

Offline

#4 2019-08-06 08:27:16

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,423

Re: Sound plays for a second but then cuts off.

That does look more sane again, do you still have the same issue? Short playback followed by silence? Are you using the laptop speakers or headphones?

Offline

#5 2019-08-06 08:33:39

Aembra
Member
Registered: 2019-08-05
Posts: 5

Re: Sound plays for a second but then cuts off.

The issue persists. I'm using speakers. (My headphone jack some other issue and my headphones doesn't play any vocals)

Offline

#6 2019-08-06 08:35:12

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,423

Re: Sound plays for a second but then cuts off.

Were the outputs above during a silence or audio period? Do they differ in any form if you repeat them during silence/audio?

Last edited by V1del (2019-08-06 08:35:46)

Offline

#7 2019-08-06 08:51:19

Aembra
Member
Registered: 2019-08-05
Posts: 5

Re: Sound plays for a second but then cuts off.

The sound no longer lasts for a second. It's just like the sound that comes out when you play with an external speaker's jack but more subtle. I tried to run the commands as the sound is playing to the best of my ability but I don't think I've succeded since it was too short of a time gap. These were the outputs I got:

  • pacmd list-cards

    1 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1f.3>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0x94420000 irq 134"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d70"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: unknown)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: unknown)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: unknown)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
		output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5765, available: unknown)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
		output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: unknown)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
		output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (priority 5765, available: unknown)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
		output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) Output + Analog Stereo Input (priority 5765, available: unknown)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: unknown)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1f.3.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"

  • pacmd list-sinks

    1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9039
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 25.67 ms
	max request: 4 KiB
	max rewind: 4 KiB
	monitor source: 0
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 25.00 ms; range is 0.50 .. 1837.50 ms
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "CX20756 Analog"
		alsa.id = "CX20756 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0x94420000 irq 134"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d70"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Conexant CX20756"
		alsa.components = "HDA:14f15114,1179f841,00100100 HDA:80862809,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>

  • pacmd list-sink-inputs

    1 sink input(s) available.
    index: 0
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_00_1f.3.analog-stereo>
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 75.00 ms
	requested latency: 25.00 ms
	sample spec: float32le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	resample method: copy
	module: 9
	client: 7 <AudioIPC Server>
	properties:
		media.name = "AudioStream"
		application.name = "AudioIPC Server"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "642"
		application.process.user = "doctor"
		application.process.host = "tardis"
		application.process.binary = "firefox"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "9139f1205a5e4a31aef70ea01868db5b"
		application.process.session_id = "2"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:AudioIPC Server"

  • sudo fuser -v /dev/snd/*

                         USER        PID ACCESS COMMAND
/dev/snd/controlC0:  doctor      609 F.... pulseaudio
/dev/snd/pcmC0D0p:   doctor      609 F...m pulseaudio

EDIT: Oh and I forgot to add that the outputs don't seem to differ when there's audio and when there's not. But I think that's because my failure to run the commands  while there was audio coming out.

Last edited by Aembra (2019-08-06 09:17:02)

Offline

#8 2019-08-07 19:43:41

Aembra
Member
Registered: 2019-08-05
Posts: 5

Re: Sound plays for a second but then cuts off.

UPDATE: Started using external speakers (I'm guessing they include a sound card since they come with both a jack and a usb cable) and the sound is fine.

Offline

Pages: 1

Board footer

Powered by FluxBB