You are not logged in.
- Topics: Active | Unanswered
#1 2019-08-26 16:24:12
- gKoko1997
- Member
- Registered: 2019-08-26
- Posts: 6
[Solved]startx fails when executing on AC power
I have Archlinux installed on a Dell Inspiron 3567
When trying to start on AC power An error is constantly thrown. On battery the error is never raised.
Does anyone has any ideas how can this be resolved?
This is the content of the log file about the failed initialization:
[ 45519.825] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 45519.831]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 45519.846] Build Operating System: Linux Arch Linux
[ 45519.851] Current Operating System: Linux kokeszLaptop 4.19.57-1-lts #1 SMP Wed Jul 3 16:05:59 CEST 2019 x86_64
[ 45519.851] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=ff82275f-f994-4d83-a48d-5f75e70dbbd2 rw quiet video.use_native_backlight=1
[ 45519.861] Build Date: 30 June 2019 09:52:01AM
[ 45519.866]
[ 45519.871] Current version of pixman: 0.38.4
[ 45519.875] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 45519.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45519.882] (==) Log file: "/home/kokesz/.local/share/xorg/Xorg.0.log", Time: Sun Jul 21 15:54:39 2019
[ 45519.884] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 45519.886] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 45519.886] (==) No Layout section. Using the first Screen section.
[ 45519.886] (==) No screen section available. Using defaults.
[ 45519.886] (**) |-->Screen "Default Screen Section" (0)
[ 45519.886] (**) | |-->Monitor "<default monitor>"
[ 45519.886] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 45519.886] (==) Automatically adding devices
[ 45519.886] (==) Automatically enabling devices
[ 45519.886] (==) Automatically adding GPU devices
[ 45519.886] (==) Automatically binding GPU devices
[ 45519.886] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 45519.886] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 45519.886] Entry deleted from font path.
[ 45519.886] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 45519.886] Entry deleted from font path.
[ 45519.886] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 45519.886] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 45519.886] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 45519.886] (II) Module ABI versions:
[ 45519.886] X.Org ANSI C Emulation: 0.4
[ 45519.886] X.Org Video Driver: 24.0
[ 45519.886] X.Org XInput driver : 24.1
[ 45519.886] X.Org Server Extension : 10.0
[ 45519.887] (++) using VT number 1
[ 45519.889] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 45519.891] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 45519.891] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 45519.892] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 45519.893] (EE) systemd-logind: failed to take device /dev/dri/card0: Invalid argument
[ 45520.636] (--) PCI:*(0@0:2:0) 8086:5916:1028:078b rev 2, Mem @ 0xd1000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 45520.636] (--) PCI: (1@0:0:0) 1002:6660:1028:078b rev 131, Mem @ 0xc0000000/268435456, 0xd0000000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 45520.636] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 45520.636] (II) LoadModule: "glx"
[ 45520.636] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 45520.637] (II) Module glx: vendor="X.Org Foundation"
[ 45520.637] compiled for 1.20.5, module version = 1.0.0
[ 45520.637] ABI class: X.Org Server Extension, version 10.0
[ 45520.637] (==) Matched intel as autoconfigured driver 0
[ 45520.637] (==) Matched modesetting as autoconfigured driver 1
[ 45520.637] (==) Matched fbdev as autoconfigured driver 2
[ 45520.637] (==) Matched vesa as autoconfigured driver 3
[ 45520.637] (==) Assigned the driver to the xf86ConfigLayout
[ 45520.637] (II) LoadModule: "intel"
[ 45520.637] (WW) Warning, couldn't open module intel
[ 45520.637] (EE) Failed to load module "intel" (module does not exist, 0)
[ 45520.637] (II) LoadModule: "modesetting"
[ 45520.637] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 45520.638] (II) Module modesetting: vendor="X.Org Foundation"
[ 45520.638] compiled for 1.20.5, module version = 1.20.5
[ 45520.638] Module class: X.Org Video Driver
[ 45520.638] ABI class: X.Org Video Driver, version 24.0
[ 45520.638] (II) LoadModule: "fbdev"
[ 45520.638] (WW) Warning, couldn't open module fbdev
[ 45520.638] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 45520.638] (II) LoadModule: "vesa"
[ 45520.638] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 45520.638] (II) Module vesa: vendor="X.Org Foundation"
[ 45520.638] compiled for 1.20.0, module version = 2.4.0
[ 45520.638] Module class: X.Org Video Driver
[ 45520.638] ABI class: X.Org Video Driver, version 24.0
[ 45520.638] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 45520.638] (II) VESA: driver for VESA chipsets: vesa
[ 45520.638] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 45520.638] (II) modeset(0): using drv /dev/dri/card1
[ 45520.638] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 45520.638] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 45520.638] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 45520.638] (==) modeset(0): RGB weight 888
[ 45520.638] (==) modeset(0): Default visual is TrueColor
[ 45520.638] (II) Loading sub module "glamoregl"
[ 45520.638] (II) LoadModule: "glamoregl"
[ 45520.638] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 45520.640] (II) Module glamoregl: vendor="X.Org Foundation"
[ 45520.640] compiled for 1.20.5, module version = 1.0.1
[ 45520.640] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45520.652] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 620 (Kaby Lake GT2)
[ 45520.652] (II) modeset(0): glamor initialized
[ 45520.653] (II) modeset(0): Output eDP-1 has no monitor section
[ 45520.658] (II) modeset(0): Output HDMI-1 has no monitor section
[ 45520.660] (II) modeset(0): EDID for output eDP-1
[ 45520.660] (II) modeset(0): Manufacturer: BOE Model: 690 Serial#: 0
[ 45520.660] (II) modeset(0): Year: 2015 Week: 1
[ 45520.660] (II) modeset(0): EDID Version: 1.4
[ 45520.660] (II) modeset(0): Digital Display Input
[ 45520.660] (II) modeset(0): 6 bits per channel
[ 45520.660] (II) modeset(0): Digital interface is DisplayPort
[ 45520.660] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 45520.660] (II) modeset(0): Gamma: 2.20
[ 45520.660] (II) modeset(0): No DPMS capabilities specified
[ 45520.660] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 45520.660] (II) modeset(0): First detailed timing is preferred mode
[ 45520.660] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 45520.660] (II) modeset(0): redX: 0.590 redY: 0.350 greenX: 0.329 greenY: 0.555
[ 45520.660] (II) modeset(0): blueX: 0.152 blueY: 0.118 whiteX: 0.312 whiteY: 0.328
[ 45520.660] (II) modeset(0): Manufacturer's mask: 0
[ 45520.660] (II) modeset(0): Supported detailed timing:
[ 45520.660] (II) modeset(0): clock: 152.6 MHz Image Size: 344 x 193 mm
[ 45520.660] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2192 h_border: 0
[ 45520.660] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1160 v_border: 0
[ 45520.660] (II) modeset(0): Supported detailed timing:
[ 45520.660] (II) modeset(0): clock: 113.1 MHz Image Size: 344 x 193 mm
[ 45520.660] (II) modeset(0): h_active: 1920 h_sync: 2020 h_sync_end 2120 h_blank_end 2142 h_border: 0
[ 45520.660] (II) modeset(0): v_active: 1080 v_sync: 1100 v_sync_end 1120 v_blanking: 1100 v_border: 0
[ 45520.660] (II) modeset(0): C1JFRNT15N41
[ 45520.660] (II) modeset(0): Unknown vendor-specific block 0
[ 45520.660] (II) modeset(0): EDID (in hex):
[ 45520.660] (II) modeset(0): 00ffffffffffff0009e5900600000000
[ 45520.660] (II) modeset(0): 01190104952213780a24109759548e27
[ 45520.660] (II) modeset(0): 1e505400000001010101010101010101
[ 45520.660] (II) modeset(0): 0101010101019c3b8010713850403020
[ 45520.660] (II) modeset(0): 360058c11000001a2e2c80de70381440
[ 45520.660] (II) modeset(0): 6464440558c11000001a000000fe0043
[ 45520.660] (II) modeset(0): 314a4652804e5431354e343100000000
[ 45520.660] (II) modeset(0): 0000412196001000000a010a202000bb
[ 45520.660] (II) modeset(0): Printing probed modes for output eDP-1
[ 45520.660] (II) modeset(0): Modeline "1920x1080"x60.0 152.60 1920 1968 2000 2192 1080 1083 1089 1160 +hsync -vsync (69.6 kHz eP)
[ 45520.660] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1920x1080"x47.1 113.10 1920 2020 2120 2142 1080 1100 1120 1121 +hsync -vsync (52.8 kHz e)
[ 45520.660] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 45520.660] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 45520.660] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 45520.660] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 45520.660] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 45520.660] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 45520.660] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 45520.660] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 45520.660] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 45520.660] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 45520.660] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 45520.660] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 45520.660] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 45520.660] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 45520.660] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 45520.660] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 45520.660] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 45520.660] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 45520.660] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 45520.660] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 45520.660] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 45520.660] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 45520.660] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 45520.660] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 45520.660] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 45520.660] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 45520.660] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 45520.660] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 45520.660] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 45520.660] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 45520.660] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 45520.660] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 45520.660] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 45520.660] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 45520.660] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 45520.660] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 45520.660] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 45520.665] (II) modeset(0): EDID for output HDMI-1
[ 45520.665] (II) modeset(0): Output eDP-1 connected
[ 45520.665] (II) modeset(0): Output HDMI-1 disconnected
[ 45520.665] (II) modeset(0): Using exact sizes for initial modes
[ 45520.665] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 45520.665] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 45520.665] (==) modeset(0): DPI set to (96, 96)
[ 45520.665] (II) Loading sub module "fb"
[ 45520.665] (II) LoadModule: "fb"
[ 45520.665] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 45520.665] (II) Module fb: vendor="X.Org Foundation"
[ 45520.665] compiled for 1.20.5, module version = 1.0.0
[ 45520.665] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45520.665] (II) UnloadModule: "vesa"
[ 45520.665] (II) Unloading vesa
[ 45520.668] (==) modeset(0): Backing store enabled
[ 45520.668] (==) modeset(0): Silken mouse disabled
[ 45520.716] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 45520.717] (==) modeset(0): DPMS enabled
[ 45520.718] (II) modeset(0): [DRI2] Setup complete
[ 45520.718] (II) modeset(0): [DRI2] DRI driver: i965
[ 45520.718] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 45520.718] (II) Initializing extension Generic Event Extension
[ 45520.718] (II) Initializing extension SHAPE
[ 45520.718] (II) Initializing extension MIT-SHM
[ 45520.718] (II) Initializing extension XInputExtension
[ 45520.718] (II) Initializing extension XTEST
[ 45520.718] (II) Initializing extension BIG-REQUESTS
[ 45520.718] (II) Initializing extension SYNC
[ 45520.718] (II) Initializing extension XKEYBOARD
[ 45520.718] (II) Initializing extension XC-MISC
[ 45520.718] (II) Initializing extension SECURITY
[ 45520.718] (II) Initializing extension XFIXES
[ 45520.718] (II) Initializing extension RENDER
[ 45520.718] (II) Initializing extension RANDR
[ 45520.718] (II) Initializing extension COMPOSITE
[ 45520.718] (II) Initializing extension DAMAGE
[ 45520.718] (II) Initializing extension MIT-SCREEN-SAVER
[ 45520.718] (II) Initializing extension DOUBLE-BUFFER
[ 45520.718] (II) Initializing extension RECORD
[ 45520.718] (II) Initializing extension DPMS
[ 45520.718] (II) Initializing extension Present
[ 45520.718] (II) Initializing extension DRI3
[ 45520.718] (II) Initializing extension X-Resource
[ 45520.718] (II) Initializing extension XVideo
[ 45520.718] (II) Initializing extension XVideo-MotionCompensation
[ 45520.718] (II) Initializing extension GLX
[ 45520.730] (II) AIGLX: Loaded and initialized i965
[ 45520.730] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 45520.730] (II) Initializing extension XFree86-VidModeExtension
[ 45520.730] (II) Initializing extension XFree86-DGA
[ 45520.730] (II) Initializing extension XFree86-DRI
[ 45520.730] (II) Initializing extension DRI2
[ 45520.736] (II) modeset(0): Damage tracking initialized
[ 45520.736] (II) modeset(0): Setting screen physical size to 508 x 285
[ 45520.797] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 45520.797] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 45520.797] (**) Power Button: Applying InputClass "system-keyboard"
[ 45520.797] (II) LoadModule: "libinput"
[ 45520.797] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 45520.798] (II) Module libinput: vendor="X.Org Foundation"
[ 45520.798] compiled for 1.20.3, module version = 0.28.2
[ 45520.798] Module class: X.Org XInput Driver
[ 45520.798] ABI class: X.Org XInput driver, version 24.1
[ 45520.798] (II) Using input driver 'libinput' for 'Power Button'
[ 45520.799] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 14 paused 0
[ 45520.799] (**) Power Button: always reports core events
[ 45520.799] (**) Option "Device" "/dev/input/event3"
[ 45520.799] (**) Option "_source" "server/udev"
[ 45520.800] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 45520.800] (II) event3 - Power Button: device is a keyboard
[ 45520.800] (II) event3 - Power Button: device removed
[ 45520.800] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 45520.800] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 45520.800] (**) Option "xkb_layout" "hu"
[ 45520.814] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 45520.814] (II) event3 - Power Button: device is a keyboard
[ 45520.814] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 45520.814] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 45520.814] (**) Video Bus: Applying InputClass "system-keyboard"
[ 45520.814] (II) Using input driver 'libinput' for 'Video Bus'
[ 45520.815] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 17 paused 0
[ 45520.815] (**) Video Bus: always reports core events
[ 45520.815] (**) Option "Device" "/dev/input/event7"
[ 45520.815] (**) Option "_source" "server/udev"
[ 45520.815] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 45520.815] (II) event7 - Video Bus: device is a keyboard
[ 45520.815] (II) event7 - Video Bus: device removed
[ 45520.815] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event7"
[ 45520.815] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 45520.815] (**) Option "xkb_layout" "hu"
[ 45520.816] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 45520.816] (II) event7 - Video Bus: device is a keyboard
[ 45520.816] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 45520.816] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 45520.816] (**) Power Button: Applying InputClass "system-keyboard"
[ 45520.816] (II) Using input driver 'libinput' for 'Power Button'
[ 45520.817] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 18 paused 0
[ 45520.817] (**) Power Button: always reports core events
[ 45520.817] (**) Option "Device" "/dev/input/event1"
[ 45520.817] (**) Option "_source" "server/udev"
[ 45520.817] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 45520.817] (II) event1 - Power Button: device is a keyboard
[ 45520.817] (II) event1 - Power Button: device removed
[ 45520.818] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 45520.818] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 45520.818] (**) Option "xkb_layout" "hu"
[ 45520.818] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 45520.818] (II) event1 - Power Button: device is a keyboard
[ 45520.818] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 45520.818] (II) No input driver specified, ignoring this device.
[ 45520.818] (II) This device may have been added with another device file.
[ 45520.819] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 45520.819] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 45520.819] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 45520.819] (II) Using input driver 'libinput' for 'Sleep Button'
[ 45520.819] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 19 paused 0
[ 45520.819] (**) Sleep Button: always reports core events
[ 45520.819] (**) Option "Device" "/dev/input/event2"
[ 45520.819] (**) Option "_source" "server/udev"
[ 45520.820] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 45520.820] (II) event2 - Sleep Button: device is a keyboard
[ 45520.820] (II) event2 - Sleep Button: device removed
[ 45520.820] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 45520.820] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 45520.820] (**) Option "xkb_layout" "hu"
[ 45520.820] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 45520.820] (II) event2 - Sleep Button: device is a keyboard
[ 45520.821] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event17)
[ 45520.821] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[ 45520.821] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "system-keyboard"
[ 45520.821] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[ 45520.822] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 20 paused 0
[ 45520.822] (**) Integrated_Webcam_HD: Integrate: always reports core events
[ 45520.822] (**) Option "Device" "/dev/input/event17"
[ 45520.822] (**) Option "_source" "server/udev"
[ 45520.823] (II) event17 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 45520.823] (II) event17 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 45520.823] (II) event17 - Integrated_Webcam_HD: Integrate: device removed
[ 45520.823] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input20/event17"
[ 45520.823] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 10)
[ 45520.823] (**) Option "xkb_layout" "hu"
[ 45520.823] (II) event17 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 45520.823] (II) event17 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 45520.824] (II) config/udev: Adding input device Synaptics TM3096-006 (/dev/input/event8)
[ 45520.824] (**) Synaptics TM3096-006: Applying InputClass "libinput touchpad catchall"
[ 45520.824] (**) Synaptics TM3096-006: Applying InputClass "touchpad catchall"
[ 45520.824] (**) Synaptics TM3096-006: Applying InputClass "Default clickpad buttons"
[ 45520.824] (**) Synaptics TM3096-006: Applying InputClass "touchpad catchall"
[ 45520.824] (**) Synaptics TM3096-006: Applying InputClass "Default clickpad buttons"
[ 45520.824] (II) LoadModule: "synaptics"
[ 45520.824] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 45520.824] (II) Module synaptics: vendor="X.Org Foundation"
[ 45520.824] compiled for 1.20.0, module version = 1.9.1
[ 45520.824] Module class: X.Org XInput Driver
[ 45520.824] ABI class: X.Org XInput driver, version 24.1
[ 45520.824] (II) Using input driver 'synaptics' for 'Synaptics TM3096-006'
[ 45520.942] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 21 paused 0
[ 45520.943] (**) Synaptics TM3096-006: always reports core events
[ 45520.943] (**) Option "Device" "/dev/input/event8"
[ 45520.943] (II) synaptics: Synaptics TM3096-006: found clickpad property
[ 45520.943] (--) synaptics: Synaptics TM3096-006: x-axis range 0 - 2040 (res 20)
[ 45520.943] (--) synaptics: Synaptics TM3096-006: y-axis range 0 - 1240 (res 20)
[ 45520.943] (--) synaptics: Synaptics TM3096-006: pressure range 0 - 255
[ 45520.943] (II) synaptics: Synaptics TM3096-006: device does not report finger width.
[ 45520.943] (--) synaptics: Synaptics TM3096-006: buttons: left double triple
[ 45520.943] (--) synaptics: Synaptics TM3096-006: Vendor 0x6cb Product 0x78f6
[ 45520.943] (--) synaptics: Synaptics TM3096-006: invalid finger width range. defaulting to 0 - 15
[ 45520.943] (**) Option "EmulateTwoFingerMinZ" "40"
[ 45520.943] (**) Option "EmulateTwoFingerMinW" "8"
[ 45520.943] (**) Option "VertTwoFingerScroll" "on"
[ 45520.943] (**) Option "HorizTwoFingerScroll" "on"
[ 45520.943] (**) Option "TapButton1" "1"
[ 45520.943] (**) Option "TapButton2" "3"
[ 45520.943] (**) Option "TapButton3" "2"
[ 45520.943] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 45520.943] (--) synaptics: Synaptics TM3096-006: touchpad found
[ 45520.943] (**) Synaptics TM3096-006: always reports core events
[ 45520.943] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL078B:00/0018:06CB:78F6.0001/input/input11/event8"
[ 45520.943] (II) XINPUT: Adding extended input device "Synaptics TM3096-006" (type: TOUCHPAD, id 11)
[ 45520.944] (**) synaptics: Synaptics TM3096-006: (accel) MinSpeed is now constant deceleration 2.5
[ 45520.944] (**) synaptics: Synaptics TM3096-006: (accel) MaxSpeed is now 1.75
[ 45520.944] (**) synaptics: Synaptics TM3096-006: (accel) AccelFactor is now 0.084
[ 45520.944] (**) Synaptics TM3096-006: (accel) keeping acceleration scheme 1
[ 45520.944] (**) Synaptics TM3096-006: (accel) acceleration profile 1
[ 45520.944] (**) Synaptics TM3096-006: (accel) acceleration factor: 2.000
[ 45520.944] (**) Synaptics TM3096-006: (accel) acceleration threshold: 4
[ 45520.944] (--) synaptics: Synaptics TM3096-006: touchpad found
[ 45520.945] (II) config/udev: Adding input device Synaptics TM3096-006 (/dev/input/mouse0)
[ 45520.945] (**) Synaptics TM3096-006: Ignoring device from InputClass "touchpad ignore duplicates"
[ 45520.946] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 45520.946] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 45520.947] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 22 paused 0
[ 45520.947] (II) LoadModule: "modesetting"
[ 45520.947] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 45520.948] (II) Module modesetting: vendor="X.Org Foundation"
[ 45520.948] compiled for 1.20.5, module version = 1.20.5
[ 45520.948] Module class: X.Org Video Driver
[ 45520.948] ABI class: X.Org Video Driver, version 24.0
[ 45520.948] (II) UnloadModule: "modesetting"
[ 45520.948] (II) Unloading modesetting
[ 45520.948] (II) Failed to load module "modesetting" (already loaded, 0)
[ 45520.948] (II) modeset(G0): using drv /dev/dri/card0
[ 45520.948] (II) modeset(G0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 45520.948] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 45520.948] (==) modeset(G0): RGB weight 888
[ 45520.948] (==) modeset(G0): Default visual is TrueColor
[ 45520.948] (II) Loading sub module "glamoregl"
[ 45520.948] (II) LoadModule: "glamoregl"
[ 45520.948] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 45520.948] (II) Module glamoregl: vendor="X.Org Foundation"
[ 45520.948] compiled for 1.20.5, module version = 1.0.1
[ 45520.948] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45521.052] (EE) modeset(G0): glamor: Failed to create GL or GLES2 contexts
[ 45521.053] (EE)
[ 45521.053] (EE) Backtrace:
[ 45521.053] (EE) 0: /usr/lib/Xorg (xorg_backtrace+0x4d) [0x558d08a8069d]
[ 45521.053] (EE) 1: /usr/lib/Xorg (0x558d089ce000+0xa8be8) [0x558d08a76be8]
[ 45521.053] (EE) 2: /usr/lib/libc.so.6 (0x7f36b1c8e000+0x3a7e0) [0x7f36b1cc87e0]
[ 45521.053] (EE) 3: /usr/lib/dri/radeonsi_dri.so (0x7f36ac3de000+0x26b424) [0x7f36ac649424]
[ 45521.053] (EE) 4: /usr/lib/dri/radeonsi_dri.so (0x7f36ac3de000+0xc1a11) [0x7f36ac49fa11]
[ 45521.053] (EE) 5: /usr/lib/dri/radeonsi_dri.so (0x7f36ac3de000+0xc1a35) [0x7f36ac49fa35]
[ 45521.053] (EE) 6: /usr/lib/dri/radeonsi_dri.so (0x7f36ac3de000+0xbab1f) [0x7f36ac498b1f]
[ 45521.053] (EE) 7: /usr/lib/libgbm.so.1 (0x7f36b0370000+0x4280) [0x7f36b0374280]
[ 45521.053] (EE) 8: /usr/lib/xorg/modules/libglamoregl.so (0x7f36b00f1000+0x1ec34) [0x7f36b010fc34]
[ 45521.053] (EE) 9: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x1a4) [0x7f36b01152e4]
[ 45521.053] (EE) 10: /usr/lib/xorg/modules/drivers/modesetting_drv.so (0x7f36b1e60000+0x117cb) [0x7f36b1e717cb]
[ 45521.053] (EE) 11: /usr/lib/Xorg (0x558d089ce000+0x74d97) [0x558d08a42d97]
[ 45521.053] (EE) 12: /usr/lib/Xorg (0x558d089ce000+0x56596) [0x558d08a24596]
[ 45521.053] (EE) 13: /usr/lib/Xorg (0x558d089ce000+0x4951a) [0x558d08a1751a]
[ 45521.053] (EE) 14: /usr/lib/Xorg (config_init+0x9b) [0x558d08a1827b]
[ 45521.053] (EE) 15: /usr/lib/Xorg (InitInput+0xa9) [0x558d08a5d1f9]
[ 45521.053] (EE) 16: /usr/lib/Xorg (0x558d089ce000+0x3780a) [0x558d08a0580a]
[ 45521.053] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf3) [0x7f36b1cb4ee3]
[ 45521.053] (EE) 18: /usr/lib/Xorg (_start+0x2e) [0x558d08a063be]
[ 45521.053] (EE)
[ 45521.053] (EE) Segmentation fault at address 0x458
[ 45521.053] (EE)
Fatal server error:
[ 45521.053] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 45521.053] (EE)
[ 45521.053] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 45521.053] (EE) Please also check the log file at "/home/kokesz/.local/share/xorg/Xorg.0.log" for additional information.
[ 45521.053] (EE)
[ 45521.053] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 45521.076] (EE) Server terminated with error (1). Closing log file.Last edited by gKoko1997 (2019-11-13 22:50:05)
Offline
#2 2019-08-26 17:16:07
- loqs
- Member
- Registered: 2014-03-06
- Posts: 19,047
Re: [Solved]startx fails when executing on AC power
Welcome to the arch linux forums gKoko1997. Please post commands, their outputs. logs e.t.c in code tags.
What is the Xorg.log when using battery? Have you tried switching to the amdgpu driver from radeon?
Offline
#3 2019-08-26 17:17:56
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,735
Re: [Solved]startx fails when executing on AC power
You've a hybrid system (intel+AMD) and the xorg driver has trouble talking to the AMD GPU.
a) please see https://bbs.archlinux.org/help.php#bbcode and wrap any logs, shell outputs etc. in "code" tags
b) post the complete output of "dmesg" or "sudo journalctl -b" after such failed start, you can use https://wiki.archlinux.org/index.php/Pastebin to directly upload the output and receive a link.
Welcome to the forum.
Offline
#4 2019-08-28 16:04:11
- gKoko1997
- Member
- Registered: 2019-08-26
- Posts: 6
Re: [Solved]startx fails when executing on AC power
Thank you guy for the warm welcome and the fast answers.
To answer logs' question:
- No I haven't tried amdgpu yet, because I had no idea that it could be the cause of the problem.
- And here is the log file of a normal startx
[ 85.634] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 85.636]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 85.641] Build Operating System: Linux Arch Linux
[ 85.642] Current Operating System: Linux kokeszLaptop 4.19.68-1-lts #1 SMP Sun Aug 25 18:27:39 CEST 2019 x86_64
[ 85.642] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=ff82275f-f994-4d83-a48d-5f75e70dbbd2 rw quiet video.use_native_backlight=1
[ 85.646] Build Date: 30 June 2019 09:52:01AM
[ 85.647]
[ 85.649] Current version of pixman: 0.38.4
[ 85.652] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 85.652] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 85.659] (==) Log file: "/home/kokesz/.local/share/xorg/Xorg.0.log", Time: Wed Aug 28 17:56:22 2019
[ 85.661] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 85.663] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 85.663] (==) No Layout section. Using the first Screen section.
[ 85.663] (==) No screen section available. Using defaults.
[ 85.663] (**) |-->Screen "Default Screen Section" (0)
[ 85.663] (**) | |-->Monitor "<default monitor>"
[ 85.663] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 85.663] (==) Automatically adding devices
[ 85.663] (==) Automatically enabling devices
[ 85.663] (==) Automatically adding GPU devices
[ 85.663] (==) Automatically binding GPU devices
[ 85.663] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 85.663] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 85.663] Entry deleted from font path.
[ 85.663] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 85.663] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 85.663] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 85.663] (II) Module ABI versions:
[ 85.663] X.Org ANSI C Emulation: 0.4
[ 85.663] X.Org Video Driver: 24.0
[ 85.663] X.Org XInput driver : 24.1
[ 85.663] X.Org Server Extension : 10.0
[ 85.664] (++) using VT number 1
[ 85.665] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 85.665] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 85.666] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 85.666] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 85.666] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 85.668] (--) PCI:*(0@0:2:0) 8086:5916:1028:078b rev 2, Mem @ 0xd1000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 85.668] (--) PCI: (1@0:0:0) 1002:6660:1028:078b rev 131, Mem @ 0xc0000000/268435456, 0xd0000000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 85.668] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 85.668] (II) LoadModule: "glx"
[ 85.668] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 85.669] (II) Module glx: vendor="X.Org Foundation"
[ 85.669] compiled for 1.20.5, module version = 1.0.0
[ 85.669] ABI class: X.Org Server Extension, version 10.0
[ 85.669] (==) Matched intel as autoconfigured driver 0
[ 85.669] (==) Matched ati as autoconfigured driver 1
[ 85.669] (==) Matched modesetting as autoconfigured driver 2
[ 85.669] (==) Matched fbdev as autoconfigured driver 3
[ 85.669] (==) Matched vesa as autoconfigured driver 4
[ 85.669] (==) Assigned the driver to the xf86ConfigLayout
[ 85.669] (II) LoadModule: "intel"
[ 85.669] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 85.669] (II) Module intel: vendor="X.Org Foundation"
[ 85.669] compiled for 1.20.5, module version = 2.99.917
[ 85.669] Module class: X.Org Video Driver
[ 85.669] ABI class: X.Org Video Driver, version 24.0
[ 85.669] (II) LoadModule: "ati"
[ 85.669] (WW) Warning, couldn't open module ati
[ 85.669] (EE) Failed to load module "ati" (module does not exist, 0)
[ 85.669] (II) LoadModule: "modesetting"
[ 85.670] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 85.670] (II) Module modesetting: vendor="X.Org Foundation"
[ 85.670] compiled for 1.20.5, module version = 1.20.5
[ 85.670] Module class: X.Org Video Driver
[ 85.670] ABI class: X.Org Video Driver, version 24.0
[ 85.670] (II) LoadModule: "fbdev"
[ 85.670] (WW) Warning, couldn't open module fbdev
[ 85.670] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 85.670] (II) LoadModule: "vesa"
[ 85.670] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 85.670] (II) Module vesa: vendor="X.Org Foundation"
[ 85.670] compiled for 1.20.0, module version = 2.4.0
[ 85.670] Module class: X.Org Video Driver
[ 85.670] ABI class: X.Org Video Driver, version 24.0
[ 85.670] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 85.670] (II) intel: Driver for Intel(R) HD Graphics
[ 85.670] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 85.670] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 85.670] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 85.670] (II) VESA: driver for VESA chipsets: vesa
[ 85.670] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 85.670] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180719
[ 85.670] (II) intel(0): SNA compiled from 2.99.917-870-g6f4972d5
[ 85.692] (WW) Falling back to old probe method for modesetting
[ 85.692] (II) modeset(G0): using drv /dev/dri/card0
[ 85.692] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 85.692] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 620
[ 85.692] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 85.692] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 85.692] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 85.692] (==) intel(0): RGB weight 888
[ 85.692] (==) intel(0): Default visual is TrueColor
[ 85.693] (II) intel(0): Output eDP1 has no monitor section
[ 85.693] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 85.693] (II) intel(0): Enabled output eDP1
[ 85.693] (II) intel(0): Output HDMI1 has no monitor section
[ 85.693] (II) intel(0): Enabled output HDMI1
[ 85.693] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 85.693] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 85.693] (II) intel(0): Enabled output VIRTUAL1
[ 85.693] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 85.693] (==) intel(0): TearFree disabled
[ 85.693] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 85.693] (==) intel(0): DPI set to (96, 96)
[ 85.693] (II) Loading sub module "dri3"
[ 85.693] (II) LoadModule: "dri3"
[ 85.693] (II) Module "dri3" already built-in
[ 85.693] (II) Loading sub module "dri2"
[ 85.693] (II) LoadModule: "dri2"
[ 85.693] (II) Module "dri2" already built-in
[ 85.694] (II) Loading sub module "present"
[ 85.694] (II) LoadModule: "present"
[ 85.694] (II) Module "present" already built-in
[ 85.694] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 85.694] (==) modeset(G0): RGB weight 888
[ 85.694] (==) modeset(G0): Default visual is TrueColor
[ 85.694] (II) Loading sub module "glamoregl"
[ 85.694] (II) LoadModule: "glamoregl"
[ 85.694] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 85.696] (II) Module glamoregl: vendor="X.Org Foundation"
[ 85.696] compiled for 1.20.5, module version = 1.0.1
[ 85.696] ABI class: X.Org ANSI C Emulation, version 0.4
[ 85.943] (II) modeset(G0): glamor X acceleration enabled on AMD HAINAN (DRM 2.50.0, 4.19.68-1-lts, LLVM 8.0.1)
[ 85.943] (II) modeset(G0): glamor initialized
[ 85.944] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 85.944] (==) modeset(G0): DPI set to (96, 96)
[ 85.944] (II) Loading sub module "fb"
[ 85.944] (II) LoadModule: "fb"
[ 85.944] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 85.971] (II) Module fb: vendor="X.Org Foundation"
[ 85.971] compiled for 1.20.5, module version = 1.0.0
[ 85.971] ABI class: X.Org ANSI C Emulation, version 0.4
[ 85.971] (II) UnloadModule: "vesa"
[ 85.971] (II) Unloading vesa
[ 86.549] (==) modeset(G0): Backing store enabled
[ 86.549] (==) modeset(G0): Silken mouse disabled
[ 86.549] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 86.549] (==) modeset(G0): DPMS enabled
[ 86.550] (II) modeset(G0): [DRI2] Setup complete
[ 86.550] (II) modeset(G0): [DRI2] DRI driver: radeonsi
[ 86.550] (II) modeset(G0): [DRI2] VDPAU driver: radeonsi
[ 86.577] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[ 86.577] (==) intel(0): Backing store enabled
[ 86.577] (==) intel(0): Silken mouse disabled
[ 86.578] (II) intel(0): HW Cursor enabled
[ 86.578] (==) intel(0): DPMS enabled
[ 86.578] (==) intel(0): Display hotplug detection enabled
[ 86.578] (II) intel(0): [DRI2] Setup complete
[ 86.578] (II) intel(0): [DRI2] DRI driver: i965
[ 86.578] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 86.579] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 86.579] (II) intel(0): hardware support for Present enabled
[ 86.579] (II) Initializing extension Generic Event Extension
[ 86.579] (II) Initializing extension SHAPE
[ 86.579] (II) Initializing extension MIT-SHM
[ 86.579] (II) Initializing extension XInputExtension
[ 86.579] (II) Initializing extension XTEST
[ 86.579] (II) Initializing extension BIG-REQUESTS
[ 86.579] (II) Initializing extension SYNC
[ 86.579] (II) Initializing extension XKEYBOARD
[ 86.579] (II) Initializing extension XC-MISC
[ 86.579] (II) Initializing extension SECURITY
[ 86.579] (II) Initializing extension XFIXES
[ 86.579] (II) Initializing extension RENDER
[ 86.579] (II) Initializing extension RANDR
[ 86.579] (II) Initializing extension COMPOSITE
[ 86.579] (II) Initializing extension DAMAGE
[ 86.579] (II) Initializing extension MIT-SCREEN-SAVER
[ 86.579] (II) Initializing extension DOUBLE-BUFFER
[ 86.579] (II) Initializing extension RECORD
[ 86.579] (II) Initializing extension DPMS
[ 86.579] (II) Initializing extension Present
[ 86.579] (II) Initializing extension DRI3
[ 86.579] (II) Initializing extension X-Resource
[ 86.579] (II) Initializing extension XVideo
[ 86.579] (II) Initializing extension XVideo-MotionCompensation
[ 86.579] (II) Initializing extension GLX
[ 86.761] (II) AIGLX: Loaded and initialized i965
[ 86.761] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 86.761] (II) Initializing extension XFree86-VidModeExtension
[ 86.761] (II) Initializing extension XFree86-DGA
[ 86.761] (II) Initializing extension XFree86-DRI
[ 86.761] (II) Initializing extension DRI2
[ 86.765] (II) modeset(G0): Damage tracking initialized
[ 86.767] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 86.780] (II) intel(0): Setting screen physical size to 508 x 285
[ 87.278] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 87.278] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 87.278] (**) Power Button: Applying InputClass "system-keyboard"
[ 87.278] (II) LoadModule: "libinput"
[ 87.278] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 87.311] (II) Module libinput: vendor="X.Org Foundation"
[ 87.311] compiled for 1.20.5, module version = 0.29.0
[ 87.311] Module class: X.Org XInput Driver
[ 87.311] ABI class: X.Org XInput driver, version 24.1
[ 87.311] (II) Using input driver 'libinput' for 'Power Button'
[ 87.313] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 20 paused 0
[ 87.313] (**) Power Button: always reports core events
[ 87.313] (**) Option "Device" "/dev/input/event3"
[ 87.313] (**) Option "_source" "server/udev"
[ 87.346] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 87.346] (II) event3 - Power Button: device is a keyboard
[ 87.346] (II) event3 - Power Button: device removed
[ 87.346] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 87.346] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 87.346] (**) Option "xkb_layout" "hu"
[ 87.409] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 87.409] (II) event3 - Power Button: device is a keyboard
[ 87.410] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 87.410] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 87.410] (**) Video Bus: Applying InputClass "system-keyboard"
[ 87.410] (II) Using input driver 'libinput' for 'Video Bus'
[ 87.411] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 23 paused 0
[ 87.411] (**) Video Bus: always reports core events
[ 87.411] (**) Option "Device" "/dev/input/event8"
[ 87.411] (**) Option "_source" "server/udev"
[ 87.412] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 87.413] (II) event8 - Video Bus: device is a keyboard
[ 87.413] (II) event8 - Video Bus: device removed
[ 87.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event8"
[ 87.413] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 87.413] (**) Option "xkb_layout" "hu"
[ 87.414] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 87.414] (II) event8 - Video Bus: device is a keyboard
[ 87.415] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 87.415] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 87.415] (**) Power Button: Applying InputClass "system-keyboard"
[ 87.415] (II) Using input driver 'libinput' for 'Power Button'
[ 87.416] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 24 paused 0
[ 87.416] (**) Power Button: always reports core events
[ 87.416] (**) Option "Device" "/dev/input/event1"
[ 87.416] (**) Option "_source" "server/udev"
[ 87.417] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 87.417] (II) event1 - Power Button: device is a keyboard
[ 87.418] (II) event1 - Power Button: device removed
[ 87.418] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 87.418] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 87.418] (**) Option "xkb_layout" "hu"
[ 87.419] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 87.419] (II) event1 - Power Button: device is a keyboard
[ 87.420] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 87.420] (II) No input driver specified, ignoring this device.
[ 87.420] (II) This device may have been added with another device file.
[ 87.421] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 87.421] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 87.421] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 87.421] (II) Using input driver 'libinput' for 'Sleep Button'
[ 87.422] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 25 paused 0
[ 87.422] (**) Sleep Button: always reports core events
[ 87.422] (**) Option "Device" "/dev/input/event2"
[ 87.422] (**) Option "_source" "server/udev"
[ 87.423] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 87.423] (II) event2 - Sleep Button: device is a keyboard
[ 87.423] (II) event2 - Sleep Button: device removed
[ 87.423] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 87.423] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 87.423] (**) Option "xkb_layout" "hu"
[ 87.425] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 87.425] (II) event2 - Sleep Button: device is a keyboard
[ 87.426] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event17)
[ 87.426] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[ 87.426] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "system-keyboard"
[ 87.426] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[ 87.427] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 26 paused 0
[ 87.427] (**) Integrated_Webcam_HD: Integrate: always reports core events
[ 87.427] (**) Option "Device" "/dev/input/event17"
[ 87.427] (**) Option "_source" "server/udev"
[ 87.429] (II) event17 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 87.429] (II) event17 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 87.429] (II) event17 - Integrated_Webcam_HD: Integrate: device removed
[ 87.429] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input20/event17"
[ 87.429] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 10)
[ 87.429] (**) Option "xkb_layout" "hu"
[ 87.431] (II) event17 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 87.431] (II) event17 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 87.432] (II) config/udev: Adding input device Synaptics TM3096-006 (/dev/input/event9)
[ 87.432] (**) Synaptics TM3096-006: Applying InputClass "libinput touchpad catchall"
[ 87.432] (**) Synaptics TM3096-006: Applying InputClass "touchpad catchall"
[ 87.432] (**) Synaptics TM3096-006: Applying InputClass "Default clickpad buttons"
[ 87.432] (**) Synaptics TM3096-006: Applying InputClass "touchpad catchall"
[ 87.432] (**) Synaptics TM3096-006: Applying InputClass "Default clickpad buttons"
[ 87.432] (II) LoadModule: "synaptics"
[ 87.433] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 87.444] (II) Module synaptics: vendor="X.Org Foundation"
[ 87.444] compiled for 1.20.0, module version = 1.9.1
[ 87.444] Module class: X.Org XInput Driver
[ 87.444] ABI class: X.Org XInput driver, version 24.1
[ 87.444] (II) Using input driver 'synaptics' for 'Synaptics TM3096-006'
[ 87.563] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 27 paused 0
[ 87.563] (**) Synaptics TM3096-006: always reports core events
[ 87.563] (**) Option "Device" "/dev/input/event9"
[ 87.563] (II) synaptics: Synaptics TM3096-006: found clickpad property
[ 87.563] (--) synaptics: Synaptics TM3096-006: x-axis range 0 - 2040 (res 20)
[ 87.563] (--) synaptics: Synaptics TM3096-006: y-axis range 0 - 1240 (res 20)
[ 87.563] (--) synaptics: Synaptics TM3096-006: pressure range 0 - 255
[ 87.563] (II) synaptics: Synaptics TM3096-006: device does not report finger width.
[ 87.563] (--) synaptics: Synaptics TM3096-006: buttons: left double triple
[ 87.563] (--) synaptics: Synaptics TM3096-006: Vendor 0x6cb Product 0x78f6
[ 87.563] (--) synaptics: Synaptics TM3096-006: invalid finger width range. defaulting to 0 - 15
[ 87.563] (**) Option "EmulateTwoFingerMinZ" "40"
[ 87.563] (**) Option "EmulateTwoFingerMinW" "8"
[ 87.563] (**) Option "VertTwoFingerScroll" "on"
[ 87.563] (**) Option "HorizTwoFingerScroll" "on"
[ 87.563] (**) Option "TapButton1" "1"
[ 87.563] (**) Option "TapButton2" "3"
[ 87.563] (**) Option "TapButton3" "2"
[ 87.563] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 87.563] (--) synaptics: Synaptics TM3096-006: touchpad found
[ 87.563] (**) Synaptics TM3096-006: always reports core events
[ 87.564] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL078B:00/0018:06CB:78F6.0001/input/input12/event9"
[ 87.564] (II) XINPUT: Adding extended input device "Synaptics TM3096-006" (type: TOUCHPAD, id 11)
[ 87.564] (**) synaptics: Synaptics TM3096-006: (accel) MinSpeed is now constant deceleration 2.5
[ 87.564] (**) synaptics: Synaptics TM3096-006: (accel) MaxSpeed is now 1.75
[ 87.564] (**) synaptics: Synaptics TM3096-006: (accel) AccelFactor is now 0.084
[ 87.564] (**) Synaptics TM3096-006: (accel) keeping acceleration scheme 1
[ 87.564] (**) Synaptics TM3096-006: (accel) acceleration profile 1
[ 87.564] (**) Synaptics TM3096-006: (accel) acceleration factor: 2.000
[ 87.564] (**) Synaptics TM3096-006: (accel) acceleration threshold: 4
[ 87.564] (--) synaptics: Synaptics TM3096-006: touchpad found
[ 87.566] (II) config/udev: Adding input device Synaptics TM3096-006 (/dev/input/mouse1)
[ 87.566] (**) Synaptics TM3096-006: Ignoring device from InputClass "touchpad ignore duplicates"
[ 87.567] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 87.567] (II) No input driver specified, ignoring this device.
[ 87.567] (II) This device may have been added with another device file.
[ 87.568] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event11)
[ 87.568] (II) No input driver specified, ignoring this device.
[ 87.568] (II) This device may have been added with another device file.
[ 87.569] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 87.569] (II) No input driver specified, ignoring this device.
[ 87.569] (II) This device may have been added with another device file.
[ 87.570] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 87.570] (II) No input driver specified, ignoring this device.
[ 87.570] (II) This device may have been added with another device file.
[ 87.570] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 87.571] (II) No input driver specified, ignoring this device.
[ 87.571] (II) This device may have been added with another device file.
[ 87.571] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event15)
[ 87.571] (II) No input driver specified, ignoring this device.
[ 87.571] (II) This device may have been added with another device file.
[ 87.572] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event16)
[ 87.572] (II) No input driver specified, ignoring this device.
[ 87.572] (II) This device may have been added with another device file.
[ 87.573] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[ 87.573] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 87.573] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 87.573] (II) Using input driver 'libinput' for 'Intel HID events'
[ 87.575] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 28 paused 0
[ 87.575] (**) Intel HID events: always reports core events
[ 87.575] (**) Option "Device" "/dev/input/event5"
[ 87.575] (**) Option "_source" "server/udev"
[ 87.576] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 87.576] (II) event5 - Intel HID events: device is a keyboard
[ 87.577] (II) event5 - Intel HID events: device removed
[ 87.577] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input8/event5"
[ 87.577] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 12)
[ 87.577] (**) Option "xkb_layout" "hu"
[ 87.578] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 87.579] (II) event5 - Intel HID events: device is a keyboard
[ 87.580] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[ 87.580] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 87.580] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[ 87.580] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 87.582] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 29 paused 0
[ 87.582] (**) Dell WMI hotkeys: always reports core events
[ 87.582] (**) Option "Device" "/dev/input/event6"
[ 87.582] (**) Option "_source" "server/udev"
[ 87.584] (II) event6 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 87.585] (II) event6 - Dell WMI hotkeys: device is a keyboard
[ 87.585] (II) event6 - Dell WMI hotkeys: device removed
[ 87.585] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7/event6"
[ 87.585] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[ 87.585] (**) Option "xkb_layout" "hu"
[ 87.588] (II) event6 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 87.588] (II) event6 - Dell WMI hotkeys: device is a keyboard
[ 87.590] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 87.590] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 87.590] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 87.590] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 87.591] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 30 paused 0
[ 87.592] (**) AT Translated Set 2 keyboard: always reports core events
[ 87.592] (**) Option "Device" "/dev/input/event4"
[ 87.592] (**) Option "_source" "server/udev"
[ 87.594] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 87.594] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 87.595] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 87.595] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 87.595] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 87.596] (**) Option "xkb_layout" "hu"
[ 87.598] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 87.598] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 87.601] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 87.601] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 87.601] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 87.601] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 87.601] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 87.601] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 87.601] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 87.602] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 31 paused 0
[ 87.602] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 87.603] (**) Option "Device" "/dev/input/event7"
[ 87.603] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 87.603] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1276 - 5664 (res 43)
[ 87.603] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1146 - 4708 (res 57)
[ 87.603] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 87.603] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 87.603] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 87.603] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 87.603] (**) Option "EmulateTwoFingerMinZ" "40"
[ 87.603] (**) Option "EmulateTwoFingerMinW" "8"
[ 87.603] (**) Option "VertTwoFingerScroll" "on"
[ 87.603] (**) Option "HorizTwoFingerScroll" "on"
[ 87.603] (**) Option "TapButton1" "1"
[ 87.603] (**) Option "TapButton2" "3"
[ 87.603] (**) Option "TapButton3" "2"
[ 87.603] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 87.603] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 87.603] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 87.603] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event7"
[ 87.603] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 87.603] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 87.603] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 87.603] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 87.603] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 87.603] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 87.603] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 87.603] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 87.603] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 87.604] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 87.604] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 88.580] (II) intel(0): EDID vendor "BOE", prod id 1680
[ 88.580] (II) intel(0): Printing DDC gathered Modelines:
[ 88.580] (II) intel(0): Modeline "1920x1080"x0.0 152.60 1920 1968 2000 2192 1080 1083 1089 1160 +hsync -vsync (69.6 kHz eP)And here is the complete output of dmesg
[ 0.009341] ACPI: SSDT 0x000000009861F298 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.009343] ACPI: BOOT 0x000000009861F5F8 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.009346] ACPI: SSDT 0x000000009861F620 0012D9 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.009348] ACPI: HPET 0x0000000098620900 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.009350] ACPI: SSDT 0x0000000098620938 000A34 (v02 INTEL xh_OEMBD 00000000 INTL 20160422)
[ 0.009352] ACPI: UEFI 0x0000000098621370 000042 (v01 00000000 00000000)
[ 0.009354] ACPI: SSDT 0x00000000986213B8 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.009356] ACPI: LPIT 0x0000000098622298 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.009358] ACPI: WSMT 0x0000000098622330 000028 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.009360] ACPI: SSDT 0x0000000098622358 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.009363] ACPI: SSDT 0x00000000986225F8 000E3F (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.009365] ACPI: DBGP 0x0000000098623438 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.009367] ACPI: DBG2 0x0000000098623470 000061 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.009369] ACPI: SSDT 0x00000000986234D8 003EA6 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.009371] ACPI: SLIC 0x0000000098627380 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.009373] ACPI: SSDT 0x00000000986274F8 00069A (v02 SgRef SgPch 00001000 INTL 20160422)
[ 0.009375] ACPI: SSDT 0x0000000098627B98 000281 (v02 SgRef SgUlx 00001000 INTL 20160422)
[ 0.009377] ACPI: DMAR 0x0000000098627E20 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.009380] ACPI: BGRT 0x0000000098627F10 000038 (v00 01072009 AMI 00010013)
[ 0.009382] ACPI: SSDT 0x0000000098627F48 000F46 (v01 AmdRef AmdTabl 00001000 INTL 20160422)
[ 0.009388] ACPI: Local APIC address 0xfee00000
[ 0.009555] No NUMA configuration found
[ 0.009556] Faking a node at [mem 0x0000000000000000-0x000000025f7fffff]
[ 0.009559] NODE_DATA(0) allocated [mem 0x25f7fc000-0x25f7fffff]
[ 0.009573] Zone ranges:
[ 0.009574] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.009575] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.009576] Normal [mem 0x0000000100000000-0x000000025f7fffff]
[ 0.009576] Device empty
[ 0.009577] Movable zone start for each node
[ 0.009578] Early memory node ranges
[ 0.009578] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.009579] node 0: [mem 0x0000000000059000-0x000000000009cfff]
[ 0.009579] node 0: [mem 0x0000000000100000-0x000000009252cfff]
[ 0.009580] node 0: [mem 0x000000009252f000-0x0000000098279fff]
[ 0.009580] node 0: [mem 0x00000000995fe000-0x00000000995fefff]
[ 0.009581] node 0: [mem 0x0000000100000000-0x000000025f7fffff]
[ 0.009583] Reserved but unavailable: 98 pages
[ 0.009584] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f7fffff]
[ 0.009585] On node 0 totalpages: 2062868
[ 0.009586] DMA zone: 64 pages used for memmap
[ 0.009586] DMA zone: 22 pages reserved
[ 0.009587] DMA zone: 3995 pages, LIFO batch:0
[ 0.009654] DMA32 zone: 9674 pages used for memmap
[ 0.009655] DMA32 zone: 619129 pages, LIFO batch:63
[ 0.021437] Normal zone: 22496 pages used for memmap
[ 0.021437] Normal zone: 1439744 pages, LIFO batch:63
[ 0.045543] Reserving Intel graphics memory at [mem 0x9b800000-0x9f7fffff]
[ 0.045692] ACPI: PM-Timer IO Port: 0x1808
[ 0.045694] ACPI: Local APIC address 0xfee00000
[ 0.045699] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.045699] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.045699] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.045700] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.045727] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.045728] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.045729] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.045731] ACPI: IRQ0 used by override.
[ 0.045731] ACPI: IRQ9 used by override.
[ 0.045733] Using ACPI (MADT) for SMP configuration information
[ 0.045734] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.045741] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.045755] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.045757] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.045757] PM: Registered nosave memory: [mem 0x0009d000-0x000fffff]
[ 0.045758] PM: Registered nosave memory: [mem 0x9252d000-0x9252dfff]
[ 0.045759] PM: Registered nosave memory: [mem 0x9252e000-0x9252efff]
[ 0.045760] PM: Registered nosave memory: [mem 0x9827a000-0x985effff]
[ 0.045760] PM: Registered nosave memory: [mem 0x985f0000-0x98628fff]
[ 0.045761] PM: Registered nosave memory: [mem 0x98629000-0x98f61fff]
[ 0.045761] PM: Registered nosave memory: [mem 0x98f62000-0x9952afff]
[ 0.045761] PM: Registered nosave memory: [mem 0x9952b000-0x995fdfff]
[ 0.045762] PM: Registered nosave memory: [mem 0x995ff000-0x9f7fffff]
[ 0.045763] PM: Registered nosave memory: [mem 0x9f800000-0xdfffffff]
[ 0.045763] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.045763] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.045764] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.045764] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.045765] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.045765] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.045765] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.045766] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.045766] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.045768] [mem 0x9f800000-0xdfffffff] available for PCI devices
[ 0.045768] Booting paravirtualized kernel on bare hardware
[ 0.045771] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.130825] random: get_random_bytes called from start_kernel+0x93/0x530 with crng_init=0
[ 0.130833] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.131109] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u524288
[ 0.131115] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[ 0.131116] pcpu-alloc: [0] 0 1 2 3
[ 0.131131] Built 1 zonelists, mobility grouping on. Total pages: 2030612
[ 0.131132] Policy zone: Normal
[ 0.131133] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=ff82275f-f994-4d83-a48d-5f75e70dbbd2 rw quiet video.use_native_backlight=1
[ 0.138365] Calgary: detecting Calgary via BIOS EBDA area
[ 0.138386] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.170928] Memory: 7918656K/8251472K available (12300K kernel code, 1365K rwdata, 3560K rodata, 1596K init, 3836K bss, 332816K reserved, 0K cma-reserved)
[ 0.171004] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.171009] Kernel/User page tables isolation: enabled
[ 0.178720] ftrace: allocating 35510 entries in 139 pages
[ 0.190198] rcu: Hierarchical RCU implementation.
[ 0.190200] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.190200] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.191401] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[ 0.191688] spurious 8259A interrupt: IRQ7.
[ 0.191713] Console: colour dummy device 80x25
[ 0.191716] console [tty0] enabled
[ 0.191729] ACPI: Core revision 20180810
[ 0.192049] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.192079] hpet clockevent registered
[ 0.192151] APIC: Switch to symmetric I/O mode setup
[ 0.192153] DMAR: Host address width 39
[ 0.192153] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.192158] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.192159] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.192162] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.192163] DMAR: RMRR base: 0x00000098343000 end: 0x00000098362fff
[ 0.192163] DMAR: RMRR base: 0x0000009b000000 end: 0x0000009f7fffff
[ 0.192164] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.192164] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.192166] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.192167] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.192167] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.192843] DMAR: DRHD: handling fault status reg 2
[ 0.192846] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0 [fault reason 37] Blocked a compatibility format interrupt request
[ 0.194075] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.194076] x2apic enabled
[ 0.194089] Switched APIC routing to cluster x2apic.
[ 0.198047] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.242088] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[ 0.242099] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=27120000)
[ 0.242101] pid_max: default: 32768 minimum: 301
[ 0.242701] Security Framework initialized
[ 0.242702] Yama: becoming mindful.
[ 0.242706] AppArmor: AppArmor disabled by boot time parameter
[ 0.244474] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.245394] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.245427] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.245453] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.245642] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.245643] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.245655] CPU0: Thermal monitoring enabled (TM1)
[ 0.245667] process: using mwait in idle threads
[ 0.245669] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.245670] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.245671] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.245672] Spectre V2 : Mitigation: Full generic retpoline
[ 0.245672] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.245673] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.245677] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.245677] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.245678] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.245697] MDS: Mitigation: Clear CPU buffers
[ 0.249478] Freeing SMP alternatives memory: 28K
[ 0.253825] TSC deadline timer enabled
[ 0.253830] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.253895] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.253920] ... version: 4
[ 0.253921] ... bit width: 48
[ 0.253921] ... generic registers: 4
[ 0.253921] ... value mask: 0000ffffffffffff
[ 0.253922] ... max period: 00007fffffffffff
[ 0.253922] ... fixed-purpose events: 3
[ 0.253923] ... event mask: 000000070000000f
[ 0.253956] rcu: Hierarchical SRCU implementation.
[ 0.254605] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.254636] smp: Bringing up secondary CPUs ...
[ 0.254689] x86: Booting SMP configuration:
[ 0.254690] .... node #0, CPUs: #1 #2
[ 0.256662] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.256662] #3
[ 0.256662] smp: Brought up 1 node, 4 CPUs
[ 0.256662] smpboot: Max logical packages: 1
[ 0.256662] smpboot: Total of 4 processors activated (21696.00 BogoMIPS)
[ 0.256662] devtmpfs: initialized
[ 0.256662] x86/mm: Memory block size: 128MB
[ 0.256662] PM: Registering ACPI NVS region [mem 0x9252d000-0x9252dfff] (4096 bytes)
[ 0.256662] PM: Registering ACPI NVS region [mem 0x98629000-0x98f61fff] (9670656 bytes)
[ 0.256662] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.256662] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.256662] pinctrl core: initialized pinctrl subsystem
[ 0.256662] RTC time: 15:48:21, date: 08/28/19
[ 0.256662] NET: Registered protocol family 16
[ 0.256662] audit: initializing netlink subsys (disabled)
[ 0.256662] audit: type=2000 audit(1567007301.070:1): state=initialized audit_enabled=0 res=1
[ 0.256662] cpuidle: using governor ladder
[ 0.256662] cpuidle: using governor menu
[ 0.256662] Simple Boot Flag at 0x47 set to 0x80
[ 0.256662] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.256662] ACPI: bus type PCI registered
[ 0.256662] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.256662] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.256662] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.256662] PCI: Using configuration type 1 for base access
[ 0.256662] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.256662] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.256662] ACPI: Added _OSI(Module Device)
[ 0.256662] ACPI: Added _OSI(Processor Device)
[ 0.256662] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.256662] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.256662] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.256662] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.295175] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.303728] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.305517] ACPI: Dynamic OEM Table Load:
[ 0.305517] ACPI: SSDT 0xFFFFA07115B30000 0006B4 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.305518] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.312908] ACPI: Dynamic OEM Table Load:
[ 0.312912] ACPI: SSDT 0xFFFFA071155EF000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.313246] ACPI: Dynamic OEM Table Load:
[ 0.313246] ACPI: SSDT 0xFFFFA07115B31000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.313247] ACPI: Dynamic OEM Table Load:
[ 0.313247] ACPI: SSDT 0xFFFFA07115465C00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.313247] ACPI: EC: EC started
[ 0.313247] ACPI: EC: interrupt blocked
[ 0.313391] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.313391] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x45, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.313391] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.313391] ACPI: Interpreter enabled
[ 0.313391] ACPI: (supports S0 S3 S4 S5)
[ 0.313391] ACPI: Using IOAPIC for interrupt routing
[ 0.313391] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.313391] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.315501] ACPI: Power Resource [WRST] (on)
[ 0.315836] ACPI: Power Resource [WRST] (on)
[ 0.316170] ACPI: Power Resource [WRST] (on)
[ 0.316506] ACPI: Power Resource [WRST] (on)
[ 0.316834] ACPI: Power Resource [WRST] (on)
[ 0.316882] ACPI: Power Resource [PC01] (on)
[ 0.322831] ACPI: Power Resource [WRST] (on)
[ 0.323167] ACPI: Power Resource [WRST] (on)
[ 0.323508] ACPI: Power Resource [WRST] (on)
[ 0.323946] ACPI: Power Resource [WRST] (on)
[ 0.324278] ACPI: Power Resource [WRST] (on)
[ 0.324606] ACPI: Power Resource [WRST] (on)
[ 0.324936] ACPI: Power Resource [WRST] (on)
[ 0.325268] ACPI: Power Resource [WRST] (on)
[ 0.325594] ACPI: Power Resource [WRST] (on)
[ 0.325923] ACPI: Power Resource [WRST] (on)
[ 0.326253] ACPI: Power Resource [WRST] (on)
[ 0.327508] ACPI: Power Resource [WRST] (on)
[ 0.327841] ACPI: Power Resource [WRST] (on)
[ 0.328174] ACPI: Power Resource [WRST] (on)
[ 0.335615] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.335615] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.335615] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.335615] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.335634] PCI host bridge to bus 0000:00
[ 0.335635] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.335636] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.335637] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.335638] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.335638] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.335639] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.335640] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.335640] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.335641] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.335642] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.335642] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.335643] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.335644] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.335644] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.335645] pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window]
[ 0.335645] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.335647] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.335653] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.342101] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.342111] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd1ffffff 64bit]
[ 0.342116] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.342120] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.342133] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.342250] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.342262] pci 0000:00:04.0: reg 0x10: [mem 0xd2320000-0xd2327fff 64bit]
[ 0.342462] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.342484] pci 0000:00:14.0: reg 0x10: [mem 0xd2310000-0xd231ffff 64bit]
[ 0.342552] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.342742] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.342764] pci 0000:00:14.2: reg 0x10: [mem 0xd2338000-0xd2338fff 64bit]
[ 0.342930] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.342959] pci 0000:00:15.0: reg 0x10: [mem 0xd2337000-0xd2337fff 64bit]
[ 0.343166] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.343195] pci 0000:00:15.1: reg 0x10: [mem 0xd2336000-0xd2336fff 64bit]
[ 0.343416] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.343443] pci 0000:00:16.0: reg 0x10: [mem 0xd2335000-0xd2335fff 64bit]
[ 0.343518] pci 0000:00:16.0: PME# supported from D3hot
[ 0.343687] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.343706] pci 0000:00:17.0: reg 0x10: [mem 0xd2330000-0xd2331fff]
[ 0.343713] pci 0000:00:17.0: reg 0x14: [mem 0xd2334000-0xd23340ff]
[ 0.343720] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.343728] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.343735] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.343742] pci 0000:00:17.0: reg 0x24: [mem 0xd2333000-0xd23337ff]
[ 0.343784] pci 0000:00:17.0: PME# supported from D3hot
[ 0.343921] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.343994] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.344169] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.344241] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.344403] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.344475] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.344653] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[ 0.344879] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.344893] pci 0000:00:1f.2: reg 0x10: [mem 0xd232c000-0xd232ffff]
[ 0.345052] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.345078] pci 0000:00:1f.3: reg 0x10: [mem 0xd2328000-0xd232bfff 64bit]
[ 0.345104] pci 0000:00:1f.3: reg 0x20: [mem 0xd2300000-0xd230ffff 64bit]
[ 0.345152] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.345364] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.345426] pci 0000:00:1f.4: reg 0x10: [mem 0xd2332000-0xd23320ff 64bit]
[ 0.345497] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.345735] pci 0000:01:00.0: [1002:6660] type 00 class 0x038000
[ 0.345758] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.345767] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd003ffff 64bit]
[ 0.345773] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.345784] pci 0000:01:00.0: reg 0x30: [mem 0xd0040000-0xd005ffff pref]
[ 0.345790] pci 0000:01:00.0: enabling Extended Tags
[ 0.345843] pci 0000:01:00.0: supports D1 D2
[ 0.345843] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.345873] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8 GT/s x4 link at 0000:00:1c.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[ 0.345929] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.345932] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.345934] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xd00fffff]
[ 0.346146] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
[ 0.346342] pci 0000:02:00.0: reg 0x10: [mem 0xd2000000-0xd21fffff 64bit]
[ 0.347047] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.347800] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.347804] pci 0000:00:1c.4: bridge window [mem 0xd2000000-0xd21fffff]
[ 0.347862] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.347888] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.347909] pci 0000:03:00.0: reg 0x18: [mem 0xd2204000-0xd2204fff 64bit]
[ 0.347922] pci 0000:03:00.0: reg 0x20: [mem 0xd2200000-0xd2203fff 64bit pref]
[ 0.348018] pci 0000:03:00.0: supports D1 D2
[ 0.348019] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.348174] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.348176] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.348178] pci 0000:00:1c.5: bridge window [mem 0xd2200000-0xd22fffff]
[ 0.352734] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.352787] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.352839] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.352891] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.352942] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.352993] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.353043] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.353094] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.353805] ACPI: EC: interrupt unblocked
[ 0.353805] ACPI: EC: event unblocked
[ 0.353805] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x45, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.353805] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.353805] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.353805] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.353805] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.353805] vgaarb: loaded
[ 0.353805] ACPI: bus type USB registered
[ 0.353805] usbcore: registered new interface driver usbfs
[ 0.353805] usbcore: registered new interface driver hub
[ 0.353805] usbcore: registered new device driver usb
[ 0.353805] pps_core: LinuxPPS API ver. 1 registered
[ 0.353805] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.353805] PTP clock support registered
[ 0.353805] EDAC MC: Ver: 3.0.0
[ 0.353805] Registered efivars operations
[ 0.362171] PCI: Using ACPI for IRQ routing
[ 0.389888] PCI: pci_cache_line_size set to 64 bytes
[ 0.390147] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.390147] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.390148] e820: reserve RAM buffer [mem 0x9252d000-0x93ffffff]
[ 0.390148] e820: reserve RAM buffer [mem 0x9827a000-0x9bffffff]
[ 0.390149] e820: reserve RAM buffer [mem 0x995ff000-0x9bffffff]
[ 0.390150] e820: reserve RAM buffer [mem 0x25f800000-0x25fffffff]
[ 0.392092] NetLabel: Initializing
[ 0.392092] NetLabel: domain hash size = 128
[ 0.392092] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.392092] NetLabel: unlabeled traffic allowed by default
[ 0.392631] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.392635] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.393120] clocksource: Switched to clocksource tsc-early
[ 0.400782] VFS: Disk quotas dquot_6.6.0
[ 0.400793] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.400867] pnp: PnP ACPI init
[ 0.401134] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.401136] system 00:00: [io 0xffff] has been reserved
[ 0.401136] system 00:00: [io 0xffff] has been reserved
[ 0.401137] system 00:00: [io 0xffff] has been reserved
[ 0.401138] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.401139] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.401142] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401233] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.401266] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.401269] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.401316] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.401329] pnp 00:04: Plug and Play ACPI device, IDs SYN0609 PNP0f13 (active)
[ 0.401553] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.401554] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.401555] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.401555] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.401556] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.401557] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.401558] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.401560] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.401561] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.401562] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.401564] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401599] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.401600] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.401600] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.401601] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.401602] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.401603] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.401604] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.401606] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401886] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.401888] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401948] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.401949] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.401950] system 00:08: [mem 0xfe035000-0xfe035fff] has been reserved
[ 0.401951] system 00:08: [mem 0xfe034008-0xfe034fff] has been reserved
[ 0.401953] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.402472] system 00:09: [mem 0xfe034000-0xfe034007] has been reserved
[ 0.402474] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.405338] pnp: PnP ACPI: found 10 devices
[ 0.410673] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.410696] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.410699] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.410702] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xd00fffff]
[ 0.410707] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.410710] pci 0000:00:1c.4: bridge window [mem 0xd2000000-0xd21fffff]
[ 0.410716] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.410717] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.410720] pci 0000:00:1c.5: bridge window [mem 0xd2200000-0xd22fffff]
[ 0.410726] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.410727] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.410728] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.410728] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.410729] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.410730] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.410730] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.410731] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.410732] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.410732] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.410733] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.410734] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.410734] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.410735] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.410736] pci_bus 0000:00: resource 18 [mem 0x9f800000-0xdfffffff window]
[ 0.410736] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window]
[ 0.410737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.410738] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd00fffff]
[ 0.410739] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd21fffff]
[ 0.410739] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.410740] pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd22fffff]
[ 0.410875] NET: Registered protocol family 2
[ 0.410977] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.410999] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.411111] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.411350] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.411381] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.411411] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.411463] NET: Registered protocol family 1
[ 0.411467] NET: Registered protocol family 44
[ 0.411474] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.411810] PCI: CLS 0 bytes, default 64
[ 0.411831] Unpacking initramfs...
[ 0.517775] Freeing initrd memory: 11816K
[ 0.517820] DMAR: ACPI device "device:6a" under DMAR at fed91000 as 00:15.0
[ 0.517822] DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.1
[ 0.592197] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.592198] software IO TLB: mapped [mem 0x8ca9e000-0x90a9e000] (64MB)
[ 0.592251] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[ 0.592264] clocksource: Switched to clocksource tsc
[ 0.592337] Scanning for low memory corruption every 60 seconds
[ 0.592821] Initialise system trusted keyrings
[ 0.592829] Key type blacklist registered
[ 0.592877] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.593806] zbud: loaded
[ 0.594898] Key type asymmetric registered
[ 0.594898] Asymmetric key parser 'x509' registered
[ 0.594905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.594929] io scheduler noop registered
[ 0.594930] io scheduler deadline registered (default)
[ 0.594974] io scheduler cfq registered
[ 0.594975] io scheduler mq-deadline registered (default)
[ 0.594975] io scheduler kyber registered
[ 0.594993] io scheduler bfq registered
[ 0.595770] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[ 0.595787] pcieport 0000:00:1c.4: AER enabled with IRQ 123
[ 0.595805] pcieport 0000:00:1c.5: AER enabled with IRQ 124
[ 0.595816] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 0.595826] pcieport 0000:00:1c.4: Signaling PME with IRQ 123
[ 0.595834] pcieport 0000:00:1c.5: Signaling PME with IRQ 124
[ 0.595851] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.595910] efifb: probing for efifb
[ 0.595925] efifb: showing boot graphics
[ 0.597177] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[ 0.597177] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.597178] efifb: scrolling: redraw
[ 0.597180] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.597222] fbcon: Deferring console take-over
[ 0.597223] fb0: EFI VGA frame buffer device
[ 0.597230] intel_idle: MWAIT substates: 0x11142120
[ 0.597231] intel_idle: v0.4.1 model 0x8E
[ 0.597386] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.597466] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.597476] ACPI: Lid Switch [LID0]
[ 0.597503] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.597511] ACPI: Power Button [PBTN]
[ 0.597551] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.597556] ACPI: Sleep Button [SBTN]
[ 0.597579] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.597586] ACPI: Power Button [PWRF]
[ 0.599669] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.599670] ACPI: Thermal Zone [THM] (25 C)
[ 0.599930] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.601116] usbcore: registered new interface driver usbserial_generic
[ 0.601120] usbserial: USB Serial support registered for generic
[ 0.601139] rtc_cmos 00:01: RTC can wake from S4
[ 0.601588] rtc_cmos 00:01: registered as rtc0
[ 0.601598] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.601640] intel_pstate: Intel P-state driver initializing
[ 0.601785] intel_pstate: HWP enabled
[ 0.601822] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.601851] intel_pmc_core: initialized
[ 0.602038] NET: Registered protocol family 10
[ 0.606704] Segment Routing with IPv6
[ 0.606729] NET: Registered protocol family 17
[ 0.606942] mce: Using 8 MCE banks
[ 0.606955] RAS: Correctable Errors collector initialized.
[ 0.606994] microcode: sig=0x806e9, pf=0x80, revision=0xb4
[ 0.607044] microcode: Microcode Update Driver: v2.2.
[ 0.607061] sched_clock: Marking stable (616607832, -9568414)->(614782222, -7742804)
[ 0.607265] registered taskstats version 1
[ 0.607272] Loading compiled-in X.509 certificates
[ 0.610476] Loaded X.509 cert 'Build time autogenerated kernel key: 792724665e472b787b43e546c91136bdc07eedaa'
[ 0.610497] zswap: loaded using pool lzo/zbud
[ 0.615575] Key type big_key registered
[ 0.617166] Magic number: 15:495:842
[ 0.617343] rtc_cmos 00:01: setting system clock to 2019-08-28 15:48:21 UTC (1567007301)
[ 0.885025] Freeing unused decrypted memory: 2040K
[ 1.088322] Freeing unused kernel image memory: 1596K
[ 1.162249] Write protecting the kernel read-only data: 18432k
[ 1.163820] Freeing unused kernel image memory: 2008K
[ 1.164038] Freeing unused kernel image memory: 536K
[ 1.177386] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.177387] x86/mm: Checking user space page tables
[ 1.190863] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.190865] Run /init as init process
[ 1.222178] fbcon: Taking over console
[ 1.222234] Console: switching to colour frame buffer device 240x67
[ 1.271869] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.273517] i8042: Warning: Keylock active
[ 1.275018] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.275027] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.285382] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.285388] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.285638] SCSI subsystem initialized
[ 1.286467] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 1.286472] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.286666] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.286667] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.286669] usb usb1: Product: xHCI Host Controller
[ 1.286670] usb usb1: Manufacturer: Linux 4.19.68-1-lts xhci-hcd
[ 1.286671] usb usb1: SerialNumber: 0000:00:14.0
[ 1.286812] hub 1-0:1.0: USB hub found
[ 1.286833] hub 1-0:1.0: 12 ports detected
[ 1.288679] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.288683] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.288686] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.288750] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 1.288751] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.288752] usb usb2: Product: xHCI Host Controller
[ 1.288754] usb usb2: Manufacturer: Linux 4.19.68-1-lts xhci-hcd
[ 1.288755] usb usb2: SerialNumber: 0000:00:14.0
[ 1.288951] hub 2-0:1.0: USB hub found
[ 1.288963] hub 2-0:1.0: 6 ports detected
[ 1.293615] libata version 3.00 loaded.
[ 1.297219] ahci 0000:00:17.0: version 3.0
[ 1.297418] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 1.299337] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.307497] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.307499] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 1.307805] scsi host0: ahci
[ 1.308009] scsi host1: ahci
[ 1.308061] ata1: SATA max UDMA/133 abar m2048@0xd2333000 port 0xd2333100 irq 126
[ 1.308063] ata2: SATA max UDMA/133 abar m2048@0xd2333000 port 0xd2333180 irq 126
[ 1.652226] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.840823] usb 1-5: New USB device found, idVendor=1bcf, idProduct=28c0, bcdDevice=65.05
[ 1.840828] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.840831] usb 1-5: Product: Integrated_Webcam_HD
[ 1.840833] usb 1-5: Manufacturer: CN0F08KGLOG007B3B8ZTA02
[ 1.912229] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.924324] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.924330] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.924334] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.961376] ata1.00: ATA-10: ST1000LM035-1RK172, SDM2, max UDMA/133
[ 1.961381] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.985783] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.985789] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.985792] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.992217] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 2.022845] ata1.00: configured for UDMA/133
[ 2.032296] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 SDM2 PQ: 0 ANSI: 5
[ 2.172575] usb 1-6: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 2.172580] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.172583] usb 1-6: Product: USB2.0-CRW
[ 2.172586] usb 1-6: Manufacturer: Generic
[ 2.172588] usb 1-6: SerialNumber: 20100201396000000
[ 2.180739] usbcore: registered new interface driver rtsx_usb
[ 2.322218] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 2.365384] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.370593] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.370598] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.370602] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.373782] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C2, max UDMA/100
[ 2.381066] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.381072] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.381075] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.384287] ata2.00: configured for UDMA/100
[ 2.388764] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A1C2 PQ: 0 ANSI: 5
[ 2.450979] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.450981] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.450985] sd 0:0:0:0: [sda] Write Protect is off
[ 2.450986] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.450992] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.503630] usb 1-8: New USB device found, idVendor=0cf3, idProduct=e009, bcdDevice= 0.01
[ 2.503634] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.511708] sda: sda1 sda2 sda3 sda6
[ 2.512487] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.513699] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.513703] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.514179] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.885003] random: fast init done
[ 3.637437] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.898725] systemd[1]: systemd 242.84-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.922523] systemd[1]: Detected architecture x86-64.
[ 5.969902] systemd[1]: Set hostname to <kokeszLaptop>.
[ 7.725956] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.726304] systemd[1]: Listening on udev Control Socket.
[ 7.727083] systemd[1]: Listening on LVM2 poll daemon socket.
[ 7.727301] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.736183] systemd[1]: Listening on Process Core Dump Socket.
[ 7.739169] systemd[1]: Created slice system-getty.slice.
[ 7.739370] systemd[1]: Listening on udev Kernel Socket.
[ 7.818344] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 7.871049] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 8.038893] audit: type=1130 audit(1567007308.909:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.057439] audit: type=1130 audit(1567007308.929:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.086496] random: lvm: uninitialized urandom read (4 bytes read)
[ 8.095144] audit: type=1130 audit(1567007308.969:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.175901] systemd-journald[211]: Received request to flush runtime journal from PID 1
[ 8.681834] vboxdrv: loading out-of-tree module taints kernel.
[ 8.682045] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 8.689679] vboxdrv: Found 4 processor cores
[ 8.712482] vboxdrv: TSC mode is Invariant, tentative frequency 2711997087 Hz
[ 8.712483] vboxdrv: Successfully loaded version 6.0.10 (interface 0x00290008)
[ 8.769512] VBoxPciLinuxInit
[ 8.769522] vboxpci: IOMMU not found (not registered)
[ 8.820035] VBoxNetAdp: Successfully started.
[ 8.858162] VBoxNetFlt: Successfully started.
[ 8.861695] audit: type=1130 audit(1567007309.729:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 8.963460] audit: type=1130 audit(1567007309.839:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.965334] audit: type=1130 audit(1567007309.839:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 9.308443] audit: type=1130 audit(1567007310.179:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.725189] audit: type=1130 audit(1567007311.599:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.792281] random: crng init done
[ 10.980189] audit: type=1130 audit(1567007311.849:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.199377] ACPI: AC Adapter [AC] (on-line)
[ 11.199731] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 11.199734] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 11.199736] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 11.199738] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 11.199741] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 11.199742] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 11.276878] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 11.380213] cryptd: max_cpu_qlen set to 1000
[ 11.493252] AVX2 version of gcm_enc/dec engaged.
[ 11.493254] AES CTR mode by8 optimization enabled
[ 11.599868] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 11.625911] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 11.659412] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 11.659476] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 11.888972] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 11.895610] audit: type=1130 audit(1567007312.769:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 12.027824] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 12.048961] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 12.113507] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 12.125548] hidraw: raw HID events driver (C) Jiri Kosina
[ 12.193543] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 12.194026] i2c_hid i2c-DELL078B:00: i2c-DELL078B:00 supply vdd not found, using dummy regulator
[ 12.194041] i2c_hid i2c-DELL078B:00: Linked as a consumer to regulator.0
[ 12.194043] i2c_hid i2c-DELL078B:00: i2c-DELL078B:00 supply vddl not found, using dummy regulator
[ 12.374717] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7
[ 12.388053] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 12.388062] r8169 0000:03:00.0: enabling device (0000 -> 0003)
[ 12.388169] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.390632] libphy: r8169: probed
[ 12.390794] r8169 0000:03:00.0 eth0: RTL8106e, 58:8a:5a:1c:46:ae, XID 44900000, IRQ 128
[ 12.394931] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.402113] psmouse serio1: synaptics: device claims to have extended capabilities, but I'm not able to read them.
[ 12.588153] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 12.588157] cfg80211: failed to load regulatory.db
[ 12.595027] iTCO_vendor_support: vendor-support=0
[ 12.597816] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.597962] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 12.600639] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.602801] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 12.603213] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 12.703966] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 12.792104] psmouse serio1: synaptics: device claims to have extended capability 0x0c, but I'm not able to read it.
[ 12.811852] intel_rapl: Found RAPL domain package
[ 12.811853] intel_rapl: Found RAPL domain core
[ 12.811854] intel_rapl: Found RAPL domain uncore
[ 12.811855] intel_rapl: Found RAPL domain dram
[ 12.828551] input: DELL078B:00 06CB:78F6 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL078B:00/0018:06CB:78F6.0001/input/input8
[ 12.829702] hid-generic 0018:06CB:78F6.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL078B:00 06CB:78F6] on i2c-DELL078B:00
[ 12.844720] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 12.909757] Adding 2060284k swap on /dev/sda3. Priority:-2 extents:1 across:2060284k FS
[ 13.089535] kauditd_printk_skb: 1 callbacks suppressed
[ 13.089536] audit: type=1130 audit(1567007313.959:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@leds:dell::kbd_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.180779] media: Linux media interface: v0.10
[ 13.222124] psmouse serio1: synaptics: Unable to initialize device.
[ 13.230545] Linux agpgart interface v0.103
[ 13.312354] videodev: Linux video capture interface: v2.00
[ 13.470559] acpi INT33D5:00: intel-hid: created platform device
[ 13.470691] input: Intel HID events as /devices/platform/INT33D5:00/input/input10
[ 13.512231] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 13.513735] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 13.644437] audit: type=1130 audit(1567007314.519:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.752116] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 13.752123] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 13.752125] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00000001/00002000
[ 13.752126] pcieport 0000:00:1c.4: [ 0] RxErr (First)
[ 13.752131] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 13.752136] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 13.760096] VFIO - User Level meta-driver version: 0.3
[ 13.930891] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3096-006, fw id: 2430125
[ 14.026522] loop: module loaded
[ 14.035365] input: Synaptics TM3096-006 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL078B:00/0018:06CB:78F6.0001/input/input11
[ 14.035680] hid-rmi 0018:06CB:78F6.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL078B:00 06CB:78F6] on i2c-DELL078B:00
[ 14.066579] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[ 14.066581] fb: switching to inteldrmfb from EFI VGA
[ 14.066603] Console: switching to colour dummy device 80x25
[ 14.067924] [drm] Replacing VGA console driver
[ 14.068995] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.068997] [drm] Driver supports precise vblank timestamp query.
[ 14.069529] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 14.103198] mousedev: PS/2 mouse device common for all mice
[ 14.106959] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 14.110416] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.111312] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 14.111530] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 14.116195] fbcon: inteldrmfb (fb0) is primary device
[ 14.143790] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1028:1810
[ 14.143792] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[ 14.144308] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[ 14.185235] [drm] radeon kernel modesetting enabled.
[ 14.185254] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 14.185405] ATPX version 1, functions 0x00000033
[ 14.185540] ATPX Hybrid Graphics
[ 14.228855] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 14.275576] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 14.332265] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 14.875492] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 14.878382] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 14.878948] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 14.884861] ath: EEPROM regdomain: 0x6c
[ 14.884863] ath: EEPROM indicates we should expect a direct regpair map
[ 14.884864] ath: Country alpha2 being used: 00
[ 14.884865] ath: Regpair used: 0x6c
[ 15.261230] Console: switching to colour frame buffer device 240x67
[ 15.283906] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 15.284369] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 15.284633] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x1028:0x078B 0x83).
[ 15.284654] vga_switcheroo: enabled
[ 15.339438] ATOM BIOS: DELL
[ 15.339448] [drm] GPU not posted. posting now...
[ 15.341826] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 15.343464] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 15.343466] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[ 15.343478] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 15.343479] [drm] RAM width 64bits DDR
[ 15.343778] [TTM] Zone kernel: Available graphics memory: 4015234 kiB
[ 15.343779] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 15.343780] [TTM] Initializing pool allocator
[ 15.343783] [TTM] Initializing DMA pool allocator
[ 15.343798] [drm] radeon: 2048M of VRAM memory ready
[ 15.343799] [drm] radeon: 2048M of GTT memory ready.
[ 15.343813] [drm] Loading hainan Microcode
[ 15.442603] audit: type=1130 audit(1567007316.319:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.464509] audit: type=1130 audit(1567007316.339:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.482466] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 15.482469] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.482471] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 15.482472] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 15.482472] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 15.482474] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 15.482475] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 15.482477] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 15.570845] [drm] Internal thermal controller without fan control
[ 15.579911] [drm] radeon: dpm initialized
[ 15.579916] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 15.582454] [drm] PCIE gen 3 link speeds already enabled
[ 15.589506] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 15.590568] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 15.590620] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 15.590665] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 15.590711] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 15.590752] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 15.590793] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 15.592280] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 15.592407] radeon 0000:01:00.0: WB enabled
[ 15.592410] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 15.592412] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 15.592413] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 15.592414] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 15.592416] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 15.592417] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.592417] [drm] Driver supports precise vblank timestamp query.
[ 15.592419] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 15.592462] radeon 0000:01:00.0: radeon: using MSI.
[ 15.592479] [drm] radeon: irq initialized.
[ 15.715759] fuse init (API version 7.27)
[ 15.732914] audit: type=1130 audit(1567007316.609:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 15.806752] [drm] ring test on 0 succeeded in 1 usecs
[ 15.806757] [drm] ring test on 1 succeeded in 1 usecs
[ 15.806762] [drm] ring test on 2 succeeded in 1 usecs
[ 15.806771] [drm] ring test on 3 succeeded in 4 usecs
[ 15.806779] [drm] ring test on 4 succeeded in 4 usecs
[ 15.806915] [drm] ib test on ring 0 succeeded in 0 usecs
[ 15.806957] [drm] ib test on ring 1 succeeded in 0 usecs
[ 15.806983] [drm] ib test on ring 2 succeeded in 0 usecs
[ 15.806997] [drm] ib test on ring 3 succeeded in 0 usecs
[ 15.807016] [drm] ib test on ring 4 succeeded in 0 usecs
[ 15.807251] [drm] Radeon Display Connectors
[ 15.810101] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[ 16.880262] [drm] amdgpu kernel modesetting enabled.
[ 16.880286] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 16.880448] ATPX version 1, functions 0x00000033
[ 16.880584] ATPX Hybrid Graphics
[ 17.535854] audit: type=1130 audit(1567007318.409:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.568142] audit: type=1127 audit(1567007318.439:19): pid=2567 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 17.603634] audit: type=1130 audit(1567007318.479:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.653472] audit: type=1130 audit(1567007318.529:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.212992] audit: type=1130 audit(1567007319.089:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.221006] audit: type=1130 audit(1567007319.089:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.347023] audit: type=1130 audit(1567007319.219:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.408367] audit: type=1130 audit(1567007319.279:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.982151] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 19.002444] NET: Registered protocol family 38
[ 19.026946] 8021q: 802.1Q VLAN Support v1.8
[ 19.192103] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 19.257984] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 19.562295] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 19.563542] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.563550] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 19.563552] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00000081/00002000
[ 19.563554] pcieport 0000:00:1c.4: [ 0] RxErr (First)
[ 19.563555] pcieport 0000:00:1c.4: [ 7] BadDLLP
[ 19.563560] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.563564] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 19.563565] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.563569] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 19.563570] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.563575] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 19.611962] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.611980] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 19.611982] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00002041/00002000
[ 19.611984] pcieport 0000:00:1c.4: [ 0] RxErr (First)
[ 19.611985] pcieport 0000:00:1c.4: [ 6] BadTLP
[ 19.611990] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.611995] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 19.611996] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.612001] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 19.612002] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.612007] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 19.612008] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.612012] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 19.612013] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.612018] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 19.612019] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 19.612023] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 19.785034] Bluetooth: Core ver 2.22
[ 19.785053] NET: Registered protocol family 31
[ 19.785053] Bluetooth: HCI device and connection manager initialized
[ 19.785057] Bluetooth: HCI socket layer initialized
[ 19.785058] Bluetooth: L2CAP socket layer initialized
[ 19.785063] Bluetooth: SCO socket layer initialized
[ 19.787501] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28c0)
[ 19.805957] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 19.805960] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 19.805961] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 19.805962] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 19.806062] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input20
[ 19.806202] usbcore: registered new interface driver uvcvideo
[ 19.806202] USB Video Class driver (1.1.1)
[ 19.901142] usbcore: registered new interface driver btusb
[ 19.996980] audit: type=1130 audit(1567007320.869:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpcd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 19.996983] audit: type=1130 audit(1567007320.869:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dcron comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.005830] audit: type=1130 audit(1567007320.879:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=iwd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.098785] audit: type=1130 audit(1567007320.969:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.098789] audit: type=1130 audit(1567007320.969:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.114879] audit: type=1130 audit(1567007320.989:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.384137] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 20.387038] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 20.396746] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 20.531127] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.531128] Bluetooth: BNEP filters: protocol multicast
[ 20.531131] Bluetooth: BNEP socket layer initialized
[ 20.683219] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.683227] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 20.683229] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00000001/00002000
[ 20.683230] pcieport 0000:00:1c.4: [ 0] RxErr (First)
[ 20.683235] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.683240] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 20.683241] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.683245] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 20.683247] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.683251] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 20.683253] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.683257] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 20.683258] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.683263] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 20.731938] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.731956] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 20.731958] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00000041/00002000
[ 20.731959] pcieport 0000:00:1c.4: [ 0] RxErr (First)
[ 20.731961] pcieport 0000:00:1c.4: [ 6] BadTLP
[ 20.731966] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.731971] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 20.731972] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.731977] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 20.731978] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.731983] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 20.731984] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.731989] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 20.731990] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: 0000:00:1c.4
[ 20.731994] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 21.499284] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 21.502195] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 21.543682] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.803516] wlan0: authenticate with 50:c7:bf:33:9d:f5
[ 21.834604] wlan0: send auth to 50:c7:bf:33:9d:f5 (try 1/3)
[ 21.835577] wlan0: authenticated
[ 21.848989] wlan0: associate with 50:c7:bf:33:9d:f5 (try 1/3)
[ 21.850716] wlan0: RX AssocResp from 50:c7:bf:33:9d:f5 (capab=0x411 status=0 aid=5)
[ 21.853149] wlan0: associated
[ 21.859826] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.012250] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:00:1c.4
[ 22.012256] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 22.012258] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
[ 22.012260] pcieport 0000:00:1c.4: [12] Timeout
[ 25.243754] kauditd_printk_skb: 5 callbacks suppressed
[ 25.243759] audit: type=1131 audit(1567007326.119:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 43.212276] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:00:1c.4
[ 43.212293] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 43.212297] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
[ 43.212302] pcieport 0000:00:1c.4: [12] Timeout
[ 51.574743] audit: type=1131 audit(1567007352.449:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 76.377919] audit: type=1006 audit(1567007377.249:39): pid=3225 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 76.486670] audit: type=1130 audit(1567007377.359:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 76.511913] audit: type=1006 audit(1567007377.379:41): pid=7504 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 76.832672] audit: type=1130 audit(1567007377.709:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 81.165876] audit: type=1130 audit(1567007382.039:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 81.204785] audit: type=1131 audit(1567007382.079:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 142.165807] audit: type=1130 audit(1567007443.039:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 142.183120] audit: type=1131 audit(1567007443.059:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 203.165014] audit: type=1130 audit(1567007504.039:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 203.181083] audit: type=1131 audit(1567007504.049:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 206.952268] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:00:1c.4
[ 206.952284] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 206.952288] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
[ 206.952292] pcieport 0000:00:1c.4: [12] Timeout
[ 237.372293] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:00:1c.4
[ 237.372305] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 237.372307] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
[ 237.372309] pcieport 0000:00:1c.4: [12] Timeout
[ 241.183938] audit: type=1130 audit(1567007542.059:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 242.143840] audit: type=1130 audit(1567007543.019:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 244.545858] Bluetooth: RFCOMM TTY layer initialized
[ 244.545863] Bluetooth: RFCOMM socket layer initialized
[ 244.545867] Bluetooth: RFCOMM ver 1.11
[ 246.582243] Bluetooth: hci0: command 0x0c24 tx timeout
[ 250.429645] audit: type=1130 audit(1567007551.299:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 252.797562] audit: type=1130 audit(1567007553.669:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 262.635534] [drm] PCIE gen 3 link speeds already enabled
[ 262.655848] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 262.655973] radeon 0000:01:00.0: WB enabled
[ 262.655975] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 262.655976] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 262.655978] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 262.655979] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 262.655980] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 262.852957] [drm] ring test on 0 succeeded in 1 usecs
[ 262.852962] [drm] ring test on 1 succeeded in 1 usecs
[ 262.852966] [drm] ring test on 2 succeeded in 1 usecs
[ 262.852974] [drm] ring test on 3 succeeded in 4 usecs
[ 262.852981] [drm] ring test on 4 succeeded in 4 usecs
[ 262.853091] [drm] ib test on ring 0 succeeded in 0 usecs
[ 262.853196] [drm] ib test on ring 1 succeeded in 0 usecs
[ 262.853311] [drm] ib test on ring 2 succeeded in 0 usecs
[ 262.853326] [drm] ib test on ring 3 succeeded in 0 usecs
[ 262.853338] [drm] ib test on ring 4 succeeded in 0 usecs
[ 264.165164] audit: type=1130 audit(1567007565.039:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 264.180791] audit: type=1131 audit(1567007565.049:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 264.463587] [drm] PCIE gen 3 link speeds already enabled
[ 264.483791] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 264.483927] radeon 0000:01:00.0: WB enabled
[ 264.483930] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 264.483931] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 264.483933] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 264.483934] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 264.483935] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 264.680937] [drm] ring test on 0 succeeded in 1 usecs
[ 264.680942] [drm] ring test on 1 succeeded in 1 usecs
[ 264.680946] [drm] ring test on 2 succeeded in 1 usecs
[ 264.680954] [drm] ring test on 3 succeeded in 4 usecs
[ 264.680961] [drm] ring test on 4 succeeded in 4 usecs
[ 264.680995] [drm] ib test on ring 0 succeeded in 0 usecs
[ 264.681022] [drm] ib test on ring 1 succeeded in 0 usecs
[ 264.681047] [drm] ib test on ring 2 succeeded in 0 usecs
[ 264.681060] [drm] ib test on ring 3 succeeded in 0 usecs
[ 264.681071] [drm] ib test on ring 4 succeeded in 0 usecs
[ 266.284598] [drm] PCIE gen 3 link speeds already enabled
[ 266.294690] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 266.294804] radeon 0000:01:00.0: WB enabled
[ 266.294805] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 266.294806] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 266.294807] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 266.294808] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 266.294808] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 266.491155] [drm] ring test on 0 succeeded in 1 usecs
[ 266.491159] [drm] ring test on 1 succeeded in 1 usecs
[ 266.491163] [drm] ring test on 2 succeeded in 1 usecs
[ 266.491171] [drm] ring test on 3 succeeded in 4 usecs
[ 266.491178] [drm] ring test on 4 succeeded in 4 usecs
[ 266.491263] [drm] ib test on ring 0 succeeded in 0 usecs
[ 266.491333] [drm] ib test on ring 1 succeeded in 0 usecs
[ 266.491359] [drm] ib test on ring 2 succeeded in 0 usecs
[ 266.491372] [drm] ib test on ring 3 succeeded in 0 usecs
[ 266.491385] [drm] ib test on ring 4 succeeded in 0 usecs
[ 268.093283] [drm] PCIE gen 3 link speeds already enabled
[ 268.103436] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 268.103553] radeon 0000:01:00.0: WB enabled
[ 268.103555] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 268.103556] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 268.103557] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 268.103557] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 268.103558] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 268.299641] [drm] ring test on 0 succeeded in 1 usecs
[ 268.299645] [drm] ring test on 1 succeeded in 1 usecs
[ 268.299649] [drm] ring test on 2 succeeded in 1 usecs
[ 268.299657] [drm] ring test on 3 succeeded in 4 usecs
[ 268.299664] [drm] ring test on 4 succeeded in 4 usecs
[ 268.299777] [drm] ib test on ring 0 succeeded in 0 usecs
[ 268.299883] [drm] ib test on ring 1 succeeded in 0 usecs
[ 268.299988] [drm] ib test on ring 2 succeeded in 0 usecs
[ 268.300001] [drm] ib test on ring 3 succeeded in 0 usecs
[ 268.300013] [drm] ib test on ring 4 succeeded in 0 usecs
[ 271.433916] [drm] PCIE gen 3 link speeds already enabled
[ 271.443924] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 271.444051] radeon 0000:01:00.0: WB enabled
[ 271.444053] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 271.444054] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 271.444055] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 271.444056] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 271.444056] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 271.640092] [drm] ring test on 0 succeeded in 1 usecs
[ 271.640096] [drm] ring test on 1 succeeded in 1 usecs
[ 271.640101] [drm] ring test on 2 succeeded in 1 usecs
[ 271.640109] [drm] ring test on 3 succeeded in 4 usecs
[ 271.640115] [drm] ring test on 4 succeeded in 4 usecs
[ 271.640149] [drm] ib test on ring 0 succeeded in 0 usecs
[ 271.640178] [drm] ib test on ring 1 succeeded in 0 usecs
[ 271.640204] [drm] ib test on ring 2 succeeded in 0 usecs
[ 271.640216] [drm] ib test on ring 3 succeeded in 0 usecs
[ 271.640228] [drm] ib test on ring 4 succeeded in 0 usecs
[ 273.233684] [drm] PCIE gen 3 link speeds already enabled
[ 273.243748] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 273.243871] radeon 0000:01:00.0: WB enabled
[ 273.243873] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 273.243874] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 273.243874] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 273.243875] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 273.243876] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 273.439780] [drm] ring test on 0 succeeded in 1 usecs
[ 273.439785] [drm] ring test on 1 succeeded in 1 usecs
[ 273.439789] [drm] ring test on 2 succeeded in 1 usecs
[ 273.439797] [drm] ring test on 3 succeeded in 4 usecs
[ 273.439804] [drm] ring test on 4 succeeded in 4 usecs
[ 273.439880] [drm] ib test on ring 0 succeeded in 0 usecs
[ 273.439907] [drm] ib test on ring 1 succeeded in 0 usecs
[ 273.439930] [drm] ib test on ring 2 succeeded in 0 usecs
[ 273.439963] [drm] ib test on ring 3 succeeded in 0 usecs
[ 273.439979] [drm] ib test on ring 4 succeeded in 0 usecs
[ 274.293010] [drm] PCIE gen 3 link speeds already enabled
[ 274.303096] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 274.303205] radeon 0000:01:00.0: WB enabled
[ 274.303207] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 274.303207] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 274.303208] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 274.303209] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 274.303210] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 274.885808] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[ 274.885825] [drm:si_resume [radeon]] *ERROR* si startup failed on resume
[ 280.742122] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting
[ 280.742133] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 69BC (len 237, WS 0, PS 4) @ 0x69CA
[ 280.742142] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 6328 (len 78, WS 12, PS 8) @ 0x6361
[ 280.749017] [drm] PCIE gen 3 link speeds already enabled
[ 281.127436] radeon 0000:01:00.0: Wait for MC idle timedout !
[ 281.316473] radeon 0000:01:00.0: Wait for MC idle timedout !
[ 281.327594] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 281.327708] radeon 0000:01:00.0: WB enabled
[ 281.327710] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 281.327711] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 281.327712] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 281.327713] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 281.327713] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 281.583137] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:00:1c.4
[ 281.583145] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 281.583146] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
[ 281.583147] pcieport 0000:00:1c.4: [12] Timeout
[ 281.909533] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[ 281.909550] [drm:si_resume [radeon]] *ERROR* si startup failed on resume
[ 282.903616] audit: type=1131 audit(1567007583.779:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 283.533432] [drm] PCIE gen 3 link speeds already enabled
[ 283.543552] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 283.543665] radeon 0000:01:00.0: WB enabled
[ 283.543667] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 283.543668] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 283.543668] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 283.543669] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 283.543670] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 283.740210] [drm] ring test on 0 succeeded in 1 usecs
[ 283.740215] [drm] ring test on 1 succeeded in 1 usecs
[ 283.740219] [drm] ring test on 2 succeeded in 1 usecs
[ 283.740227] [drm] ring test on 3 succeeded in 4 usecs
[ 283.740234] [drm] ring test on 4 succeeded in 4 usecs
[ 283.740267] [drm] ib test on ring 0 succeeded in 0 usecs
[ 283.740294] [drm] ib test on ring 1 succeeded in 0 usecs
[ 283.740320] [drm] ib test on ring 2 succeeded in 0 usecs
[ 283.740332] [drm] ib test on ring 3 succeeded in 0 usecs
[ 283.740344] [drm] ib test on ring 4 succeeded in 0 usecs
[ 285.333980] [drm] PCIE gen 3 link speeds already enabled
[ 285.343899] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 285.344014] radeon 0000:01:00.0: WB enabled
[ 285.344016] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 285.344017] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 285.344018] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 285.344019] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 285.344019] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 285.540080] [drm] ring test on 0 succeeded in 1 usecs
[ 285.540084] [drm] ring test on 1 succeeded in 1 usecs
[ 285.540089] [drm] ring test on 2 succeeded in 1 usecs
[ 285.540097] [drm] ring test on 3 succeeded in 4 usecs
[ 285.540103] [drm] ring test on 4 succeeded in 4 usecs
[ 285.540189] [drm] ib test on ring 0 succeeded in 0 usecs
[ 285.540249] [drm] ib test on ring 1 succeeded in 0 usecs
[ 285.540278] [drm] ib test on ring 2 succeeded in 0 usecs
[ 285.540351] [drm] ib test on ring 3 succeeded in 0 usecs
[ 285.540422] [drm] ib test on ring 4 succeeded in 0 usecs
[ 287.143529] [drm] PCIE gen 3 link speeds already enabled
[ 287.153666] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 287.153792] radeon 0000:01:00.0: WB enabled
[ 287.153794] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 287.153795] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 287.153796] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 287.153796] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 287.153797] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 287.349789] [drm] ring test on 0 succeeded in 1 usecs
[ 287.349794] [drm] ring test on 1 succeeded in 1 usecs
[ 287.349798] [drm] ring test on 2 succeeded in 1 usecs
[ 287.349806] [drm] ring test on 3 succeeded in 4 usecs
[ 287.349813] [drm] ring test on 4 succeeded in 4 usecs
[ 287.349846] [drm] ib test on ring 0 succeeded in 0 usecs
[ 287.349876] [drm] ib test on ring 1 succeeded in 0 usecs
[ 287.349900] [drm] ib test on ring 2 succeeded in 0 usecs
[ 287.349913] [drm] ib test on ring 3 succeeded in 0 usecs
[ 287.349925] [drm] ib test on ring 4 succeeded in 0 usecs
[ 288.944704] [drm] PCIE gen 3 link speeds already enabled
[ 288.954808] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 288.954925] radeon 0000:01:00.0: WB enabled
[ 288.954927] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 288.954928] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 288.954929] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 288.954930] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 288.954930] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 289.150958] [drm] ring test on 0 succeeded in 1 usecs
[ 289.150962] [drm] ring test on 1 succeeded in 1 usecs
[ 289.150966] [drm] ring test on 2 succeeded in 1 usecs
[ 289.150975] [drm] ring test on 3 succeeded in 4 usecs
[ 289.150981] [drm] ring test on 4 succeeded in 4 usecs
[ 289.151014] [drm] ib test on ring 0 succeeded in 0 usecs
[ 289.151041] [drm] ib test on ring 1 succeeded in 0 usecs
[ 289.151066] [drm] ib test on ring 2 succeeded in 0 usecs
[ 289.151079] [drm] ib test on ring 3 succeeded in 0 usecs
[ 289.151091] [drm] ib test on ring 4 succeeded in 0 usecs
[ 290.743986] [drm] PCIE gen 3 link speeds already enabled
[ 290.753989] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 290.754108] radeon 0000:01:00.0: WB enabled
[ 290.754110] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 290.754110] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 290.754111] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 290.754112] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 290.754113] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 290.949950] [drm] ring test on 0 succeeded in 1 usecs
[ 290.949955] [drm] ring test on 1 succeeded in 1 usecs
[ 290.949959] [drm] ring test on 2 succeeded in 1 usecs
[ 290.949967] [drm] ring test on 3 succeeded in 4 usecs
[ 290.949974] [drm] ring test on 4 succeeded in 4 usecs
[ 290.950057] [drm] ib test on ring 0 succeeded in 0 usecs
[ 290.950134] [drm] ib test on ring 1 succeeded in 0 usecs
[ 290.950162] [drm] ib test on ring 2 succeeded in 0 usecs
[ 290.950175] [drm] ib test on ring 3 succeeded in 0 usecs
[ 290.950187] [drm] ib test on ring 4 succeeded in 0 usecs
[ 292.563490] [drm] PCIE gen 3 link speeds already enabled
[ 292.573626] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 292.573745] radeon 0000:01:00.0: WB enabled
[ 292.573747] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 292.573748] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 292.573749] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 292.573750] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 292.573751] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 292.770375] [drm] ring test on 0 succeeded in 1 usecs
[ 292.770380] [drm] ring test on 1 succeeded in 1 usecs
[ 292.770385] [drm] ring test on 2 succeeded in 1 usecs
[ 292.770393] [drm] ring test on 3 succeeded in 4 usecs
[ 292.770399] [drm] ring test on 4 succeeded in 4 usecs
[ 292.770509] [drm] ib test on ring 0 succeeded in 0 usecs
[ 292.770617] [drm] ib test on ring 1 succeeded in 0 usecs
[ 292.770722] [drm] ib test on ring 2 succeeded in 0 usecs
[ 292.770737] [drm] ib test on ring 3 succeeded in 0 usecs
[ 292.770748] [drm] ib test on ring 4 succeeded in 0 usecs
[ 294.373946] [drm] PCIE gen 3 link speeds already enabled
[ 294.383975] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 294.384094] radeon 0000:01:00.0: WB enabled
[ 294.384096] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 294.384096] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 294.384097] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 294.384098] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 294.384099] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 294.580123] [drm] ring test on 0 succeeded in 1 usecs
[ 294.580127] [drm] ring test on 1 succeeded in 1 usecs
[ 294.580132] [drm] ring test on 2 succeeded in 1 usecs
[ 294.580140] [drm] ring test on 3 succeeded in 4 usecs
[ 294.580146] [drm] ring test on 4 succeeded in 4 usecs
[ 294.580255] [drm] ib test on ring 0 succeeded in 0 usecs
[ 294.580364] [drm] ib test on ring 1 succeeded in 0 usecs
[ 294.580469] [drm] ib test on ring 2 succeeded in 0 usecs
[ 294.580483] [drm] ib test on ring 3 succeeded in 0 usecs
[ 294.580495] [drm] ib test on ring 4 succeeded in 0 usecs
[ 296.184601] [drm] PCIE gen 3 link speeds already enabled
[ 296.194740] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 296.194858] radeon 0000:01:00.0: WB enabled
[ 296.194860] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 296.194861] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 296.194861] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 296.194862] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 296.194863] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 296.390766] [drm] ring test on 0 succeeded in 1 usecs
[ 296.390771] [drm] ring test on 1 succeeded in 1 usecs
[ 296.390775] [drm] ring test on 2 succeeded in 1 usecs
[ 296.390783] [drm] ring test on 3 succeeded in 4 usecs
[ 296.390790] [drm] ring test on 4 succeeded in 4 usecs
[ 296.390863] [drm] ib test on ring 0 succeeded in 0 usecs
[ 296.390963] [drm] ib test on ring 1 succeeded in 0 usecs
[ 296.391023] [drm] ib test on ring 2 succeeded in 0 usecs
[ 296.391035] [drm] ib test on ring 3 succeeded in 0 usecs
[ 296.391047] [drm] ib test on ring 4 succeeded in 0 usecs
[ 297.983706] [drm] PCIE gen 3 link speeds already enabled
[ 297.993851] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 297.993966] radeon 0000:01:00.0: WB enabled
[ 297.993968] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 297.993969] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 297.993970] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 297.993970] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 297.993971] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 298.189928] [drm] ring test on 0 succeeded in 1 usecs
[ 298.189932] [drm] ring test on 1 succeeded in 1 usecs
[ 298.189936] [drm] ring test on 2 succeeded in 1 usecs
[ 298.189944] [drm] ring test on 3 succeeded in 4 usecs
[ 298.189951] [drm] ring test on 4 succeeded in 4 usecs
[ 298.190034] [drm] ib test on ring 0 succeeded in 0 usecs
[ 298.190100] [drm] ib test on ring 1 succeeded in 0 usecs
[ 298.190124] [drm] ib test on ring 2 succeeded in 0 usecs
[ 298.190136] [drm] ib test on ring 3 succeeded in 0 usecs
[ 298.190148] [drm] ib test on ring 4 succeeded in 0 usecs
[ 299.794515] [drm] PCIE gen 3 link speeds already enabled
[ 299.804287] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 299.804402] radeon 0000:01:00.0: WB enabled
[ 299.804404] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 299.804405] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 299.804406] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 299.804406] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 299.804407] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 300.000399] [drm] ring test on 0 succeeded in 1 usecs
[ 300.000404] [drm] ring test on 1 succeeded in 1 usecs
[ 300.000409] [drm] ring test on 2 succeeded in 1 usecs
[ 300.000417] [drm] ring test on 3 succeeded in 4 usecs
[ 300.000423] [drm] ring test on 4 succeeded in 4 usecs
[ 300.000563] [drm] ib test on ring 0 succeeded in 0 usecs
[ 300.000640] [drm] ib test on ring 1 succeeded in 0 usecs
[ 300.000664] [drm] ib test on ring 2 succeeded in 0 usecs
[ 300.000677] [drm] ib test on ring 3 succeeded in 0 usecs
[ 300.000689] [drm] ib test on ring 4 succeeded in 0 usecs
[ 301.593891] [drm] PCIE gen 3 link speeds already enabled
[ 301.603972] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 301.604088] radeon 0000:01:00.0: WB enabled
[ 301.604089] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 301.604090] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 301.604091] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 301.604092] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 301.604092] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 301.799903] [drm] ring test on 0 succeeded in 1 usecs
[ 301.799908] [drm] ring test on 1 succeeded in 1 usecs
[ 301.799912] [drm] ring test on 2 succeeded in 1 usecs
[ 301.799920] [drm] ring test on 3 succeeded in 4 usecs
[ 301.799926] [drm] ring test on 4 succeeded in 4 usecs
[ 301.799957] [drm] ib test on ring 0 succeeded in 0 usecs
[ 301.799984] [drm] ib test on ring 1 succeeded in 0 usecs
[ 301.800010] [drm] ib test on ring 2 succeeded in 0 usecs
[ 301.800022] [drm] ib test on ring 3 succeeded in 0 usecs
[ 301.800034] [drm] ib test on ring 4 succeeded in 0 usecs
[ 303.404063] [drm] PCIE gen 3 link speeds already enabled
[ 303.413994] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 303.414111] radeon 0000:01:00.0: WB enabled
[ 303.414113] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 303.414114] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 303.414114] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 303.414115] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 303.414116] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 303.610098] [drm] ring test on 0 succeeded in 1 usecs
[ 303.610102] [drm] ring test on 1 succeeded in 1 usecs
[ 303.610106] [drm] ring test on 2 succeeded in 1 usecs
[ 303.610114] [drm] ring test on 3 succeeded in 4 usecs
[ 303.610121] [drm] ring test on 4 succeeded in 4 usecs
[ 303.610154] [drm] ib test on ring 0 succeeded in 0 usecs
[ 303.610182] [drm] ib test on ring 1 succeeded in 0 usecs
[ 303.610207] [drm] ib test on ring 2 succeeded in 0 usecs
[ 303.610220] [drm] ib test on ring 3 succeeded in 0 usecs
[ 303.610231] [drm] ib test on ring 4 succeeded in 0 usecs
[ 305.223440] [drm] PCIE gen 3 link speeds already enabled
[ 305.233576] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 305.233693] radeon 0000:01:00.0: WB enabled
[ 305.233695] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 305.233696] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 305.233697] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 305.233698] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 305.233698] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 305.430090] [drm] ring test on 0 succeeded in 1 usecs
[ 305.430094] [drm] ring test on 1 succeeded in 1 usecs
[ 305.430098] [drm] ring test on 2 succeeded in 1 usecs
[ 305.430107] [drm] ring test on 3 succeeded in 4 usecs
[ 305.430114] [drm] ring test on 4 succeeded in 4 usecs
[ 305.430207] [drm] ib test on ring 0 succeeded in 0 usecs
[ 305.430275] [drm] ib test on ring 1 succeeded in 0 usecs
[ 305.430302] [drm] ib test on ring 2 succeeded in 0 usecs
[ 305.430315] [drm] ib test on ring 3 succeeded in 0 usecs
[ 305.430327] [drm] ib test on ring 4 succeeded in 0 usecs
[ 307.033577] [drm] PCIE gen 3 link speeds already enabled
[ 307.043540] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 307.043656] radeon 0000:01:00.0: WB enabled
[ 307.043658] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 307.043659] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 307.043660] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 307.043660] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 307.043661] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 307.239563] [drm] ring test on 0 succeeded in 1 usecs
[ 307.239568] [drm] ring test on 1 succeeded in 1 usecs
[ 307.239572] [drm] ring test on 2 succeeded in 1 usecs
[ 307.239580] [drm] ring test on 3 succeeded in 4 usecs
[ 307.239587] [drm] ring test on 4 succeeded in 4 usecs
[ 307.239725] [drm] ib test on ring 0 succeeded in 0 usecs
[ 307.239794] [drm] ib test on ring 1 succeeded in 0 usecs
[ 307.239823] [drm] ib test on ring 2 succeeded in 0 usecs
[ 307.239836] [drm] ib test on ring 3 succeeded in 0 usecs
[ 307.239847] [drm] ib test on ring 4 succeeded in 0 usecs
[ 307.253889] audit: type=1701 audit(1567007608.129:56): auid=1000 uid=1000 gid=1000 ses=1 pid=7956 comm="Xorg" exe="/usr/lib/Xorg" sig=6 res=1
[ 307.298070] audit: type=1130 audit(1567007608.169:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-7977-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 309.513351] [drm] PCIE gen 3 link speeds already enabled
[ 309.522757] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 309.522876] radeon 0000:01:00.0: WB enabled
[ 309.522877] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7b79565
[ 309.522878] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000533b6cf9
[ 309.522879] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000e5c2f567
[ 309.522880] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000f7f019a0
[ 309.522881] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006149f470
[ 309.719124] [drm] ring test on 0 succeeded in 1 usecs
[ 309.719129] [drm] ring test on 1 succeeded in 1 usecs
[ 309.719133] [drm] ring test on 2 succeeded in 1 usecs
[ 309.719141] [drm] ring test on 3 succeeded in 4 usecs
[ 309.719148] [drm] ring test on 4 succeeded in 4 usecs
[ 309.719264] [drm] ib test on ring 0 succeeded in 0 usecs
[ 309.719373] [drm] ib test on ring 1 succeeded in 0 usecs
[ 309.719485] [drm] ib test on ring 2 succeeded in 0 usecs
[ 309.719498] [drm] ib test on ring 3 succeeded in 0 usecs
[ 309.719511] [drm] ib test on ring 4 succeeded in 0 usecs
[ 311.404383] audit: type=1131 audit(1567007612.279:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-7977-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 325.164299] audit: type=1130 audit(1567007626.039:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 325.180110] audit: type=1131 audit(1567007626.049:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=BatteryCheck comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'Offline
#5 2019-08-28 17:48:42
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,735
Re: [Solved]startx fails when executing on AC power
To try the amdgpu driver see https://wiki.archlinux.org/index.php/AM … K)_support
You can also try the X11 drivers xf86-video-ati, resp. xf86-video-amdgpu instead of the modesetting driver and you should seriously test the behavior on the main kernel (not the LTS one)
Offline
#6 2019-11-02 18:06:40
- gKoko1997
- Member
- Registered: 2019-08-26
- Posts: 6
Re: [Solved]startx fails when executing on AC power
Sorry for the late reply...
I have an AMD Radeon R5 M430 GPU and was trying to figure out the right driver.
I already had xf86-video-amdgpu and mesa installed when the error occured.
I have tried xf86-video-ati and it fixed the problem 
BTW why do you suggest the main kernel instead of the LTS?
Thank you for your help.
Last edited by gKoko1997 (2019-11-02 18:07:36)
Offline
#7 2019-11-02 21:22:21
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,735
Re: [Solved]startx fails when executing on AC power
BTW why do you suggest the main kernel instead of the LTS?To see whether any progression in esp. the amdgpu module improves the situation (though you're currently not using it)
Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.
Offline
#8 2019-11-02 21:49:21
- gKoko1997
- Member
- Registered: 2019-08-26
- Posts: 6
Re: [Solved]startx fails when executing on AC power
seth wrote:
Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.
Is it possible that I can't edit the post?
When I hit submit it refreshes the page and discards any changes I made to either the subject or the body of the post...
Offline
#9 2019-11-02 21:58:10
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,735
Re: [Solved]startx fails when executing on AC power
This link: https://bbs.archlinux.org/edit.php?id=1860481 ?
Offline
#10 2019-11-02 22:00:07
- gKoko1997
- Member
- Registered: 2019-08-26
- Posts: 6
Re: [Solved]startx fails when executing on AC power
yeah
Offline
#11 2019-11-02 22:04:20
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,735
Re: [Solved]startx fails when executing on AC power
*shrug* - did you maybe try a very long subject?
Offline
#12 2019-11-02 22:07:12
- gKoko1997
- Member
- Registered: 2019-08-26
- Posts: 6
Re: [Solved]startx fails when executing on AC power
Can't be, because I tried submitting it without editing the Subject, and just addig a line at the top.. 
But it seems I can edit the replies
Last edited by gKoko1997 (2019-11-02 22:08:05)
Offline