You are not logged in.
- Topics: Active | Unanswered
#1 2019-09-01 05:26:35
- tkwilson
- Member
- Registered: 2019-09-01
- Posts: 9
[SOLVED] X11 / SDDM issue - Does nothing at login screen
Hi all first time poster, short time reader. 
I am a true newbie with only limited experience with Ubuntu and Mint prior to jumping headfirst into Arch after I got fed up with MS (You all know that story).
I just got my installation of Arch finally working earlier today, but when I start X (sudo systemctl start sddm.service) I get the login screen and see my user, but I can't log in. It does not seem to be even trying. I type in my password (little boxes appear showing that I am typing), but nothing at all happens when I hit return. My only option on this screen is to either power off or restart from the buttons in the upper-right.
I can ctrl-alt-F2 to another terminal, and I can clearly see that X has started, and if I do a stop sddm.service, I can see X shutdown cleanly. I have searched and read a lot, but have yet to stumble onto the solution.
Of interest (to me at least) in Xorg.0.log:
[ 23790.917] (EE) Failed to load module "intel" (module does not exist, 0)
[ 23790.917] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23791.681] (EE) Failed to open authorization file "/var/run/sddm/{c159c9a8-14ef-4a32-9251-8ac025e87405}": No such file or directoryThe last error message, I checked, and ... The file {c159c9a8.... is there when X is running, but goes away when I shut it down. When I start it again, a new, differently named file appears and in the new log file I get the same error, but pointing to the new file that was just created. Good times.
Full output of Xorg.0.log:
[ 23790.902] (--) Log file renamed from "/var/log/Xorg.pid-1567.log" to "/var/log/Xorg.0.log"
[ 23790.902]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 23790.902] Build Operating System: Linux Arch Linux
[ 23790.902] Current Operating System: Linux ArchMiscreant 5.2.11-arch1-1-ARCH #1 SMP PREEMPT Thu Aug 29 08:09:36 UTC 2019 x86_64
[ 23790.902] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda3 rw
[ 23790.902] Build Date: 30 June 2019 09:52:01AM
[ 23790.902]
[ 23790.902] Current version of pixman: 0.38.4
[ 23790.902] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 23790.902] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23790.902] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 31 23:45:36 2019
[ 23790.903] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23790.903] (==) No Layout section. Using the first Screen section.
[ 23790.903] (==) No screen section available. Using defaults.
[ 23790.903] (**) |-->Screen "Default Screen Section" (0)
[ 23790.903] (**) | |-->Monitor "<default monitor>"
[ 23790.903] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23790.903] (==) Automatically adding devices
[ 23790.903] (==) Automatically enabling devices
[ 23790.903] (==) Automatically adding GPU devices
[ 23790.903] (==) Automatically binding GPU devices
[ 23790.903] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 23790.903] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 23790.903] Entry deleted from font path.
[ 23790.903] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 23790.903] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 23790.903] Entry deleted from font path.
[ 23790.903] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 23790.903] Entry deleted from font path.
[ 23790.903] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 23790.903] Entry deleted from font path.
[ 23790.903] (==) FontPath set to:
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 23790.903] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23790.903] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23790.903] (II) Module ABI versions:
[ 23790.903] X.Org ANSI C Emulation: 0.4
[ 23790.903] X.Org Video Driver: 24.0
[ 23790.903] X.Org XInput driver : 24.1
[ 23790.903] X.Org Server Extension : 10.0
[ 23790.903] (++) using VT number 1
[ 23790.903] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 23790.904] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23790.915] (--) PCI:*(0@0:2:0) 8086:1912:1462:7976 rev 6, Mem @ 0xdd000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 23790.915] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 23790.916] (II) LoadModule: "glx"
[ 23790.916] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23790.917] (II) Module glx: vendor="X.Org Foundation"
[ 23790.917] compiled for 1.20.5, module version = 1.0.0
[ 23790.917] ABI class: X.Org Server Extension, version 10.0
[ 23790.917] (==) Matched intel as autoconfigured driver 0
[ 23790.917] (==) Matched modesetting as autoconfigured driver 1
[ 23790.917] (==) Matched fbdev as autoconfigured driver 2
[ 23790.917] (==) Matched vesa as autoconfigured driver 3
[ 23790.917] (==) Assigned the driver to the xf86ConfigLayout
[ 23790.917] (II) LoadModule: "intel"
[ 23790.917] (WW) Warning, couldn't open module intel
[ 23790.917] (EE) Failed to load module "intel" (module does not exist, 0)
[ 23790.917] (II) LoadModule: "modesetting"
[ 23790.917] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 23790.917] (II) Module modesetting: vendor="X.Org Foundation"
[ 23790.917] compiled for 1.20.5, module version = 1.20.5
[ 23790.917] Module class: X.Org Video Driver
[ 23790.917] ABI class: X.Org Video Driver, version 24.0
[ 23790.917] (II) LoadModule: "fbdev"
[ 23790.917] (WW) Warning, couldn't open module fbdev
[ 23790.917] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23790.917] (II) LoadModule: "vesa"
[ 23790.917] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23790.917] (II) Module vesa: vendor="X.Org Foundation"
[ 23790.917] compiled for 1.20.0, module version = 2.4.0
[ 23790.917] Module class: X.Org Video Driver
[ 23790.917] ABI class: X.Org Video Driver, version 24.0
[ 23790.917] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 23790.917] (II) VESA: driver for VESA chipsets: vesa
[ 23790.947] (II) modeset(0): using drv /dev/dri/card0
[ 23790.948] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23790.948] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 23790.948] (==) modeset(0): RGB weight 888
[ 23790.948] (==) modeset(0): Default visual is TrueColor
[ 23790.948] (II) Loading sub module "glamoregl"
[ 23790.948] (II) LoadModule: "glamoregl"
[ 23790.948] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 23790.953] (II) Module glamoregl: vendor="X.Org Foundation"
[ 23790.953] compiled for 1.20.5, module version = 1.0.1
[ 23790.953] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23790.987] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 530 (Skylake GT2)
[ 23790.987] (II) modeset(0): glamor initialized
[ 23791.002] (II) modeset(0): Output HDMI-1 has no monitor section
[ 23791.005] (II) modeset(0): Output HDMI-2 has no monitor section
[ 23791.006] (II) modeset(0): Output DP-1 has no monitor section
[ 23791.009] (II) modeset(0): Output HDMI-3 has no monitor section
[ 23791.025] (II) modeset(0): EDID for output HDMI-1
[ 23791.025] (II) modeset(0): Manufacturer: DEL Model: 4091 Serial#: 909324373
[ 23791.025] (II) modeset(0): Year: 2015 Week: 36
[ 23791.025] (II) modeset(0): EDID Version: 1.3
[ 23791.025] (II) modeset(0): Digital Display Input
[ 23791.025] (II) modeset(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 23791.025] (II) modeset(0): Gamma: 2.20
[ 23791.025] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 23791.025] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23791.025] (II) modeset(0): Default color space is primary color space
[ 23791.025] (II) modeset(0): First detailed timing is preferred mode
[ 23791.025] (II) modeset(0): redX: 0.645 redY: 0.332 greenX: 0.315 greenY: 0.619
[ 23791.025] (II) modeset(0): blueX: 0.151 blueY: 0.065 whiteX: 0.313 whiteY: 0.329
[ 23791.025] (II) modeset(0): Supported established timings:
[ 23791.025] (II) modeset(0): 720x400@70Hz
[ 23791.025] (II) modeset(0): 640x480@60Hz
[ 23791.025] (II) modeset(0): 640x480@75Hz
[ 23791.025] (II) modeset(0): 800x600@60Hz
[ 23791.025] (II) modeset(0): 800x600@75Hz
[ 23791.025] (II) modeset(0): 1024x768@60Hz
[ 23791.025] (II) modeset(0): 1024x768@75Hz
[ 23791.025] (II) modeset(0): 1280x1024@75Hz
[ 23791.025] (II) modeset(0): Manufacturer's mask: 0
[ 23791.025] (II) modeset(0): Supported standard timings:
[ 23791.025] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 23791.025] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 23791.025] (II) modeset(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 23791.025] (II) modeset(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 23791.025] (II) modeset(0): Supported detailed timing:
[ 23791.025] (II) modeset(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 23791.025] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 23791.025] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 23791.025] (II) modeset(0): Serial No: FF3N1594630U
[ 23791.025] (II) modeset(0): Monitor name: DELL E2414H
[ 23791.025] (II) modeset(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 23791.025] (II) modeset(0): EDID (in hex):
[ 23791.025] (II) modeset(0): 00ffffffffffff0010ac914055303336
[ 23791.025] (II) modeset(0): 2419010380351e78ee0ef5a555509e26
[ 23791.025] (II) modeset(0): 105054a54b00714f8180a9c0d1c00101
[ 23791.025] (II) modeset(0): 010101010101023a801871382d40582c
[ 23791.025] (II) modeset(0): 4500132b2100001e000000ff00464633
[ 23791.025] (II) modeset(0): 4e31353934363330550a000000fc0044
[ 23791.025] (II) modeset(0): 454c4c204532343134480a20000000fd
[ 23791.025] (II) modeset(0): 00384c1e5311000a2020202020200006
[ 23791.025] (II) modeset(0): Printing probed modes for output HDMI-1
[ 23791.025] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 23791.025] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 23791.025] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 23791.025] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 23791.025] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 23791.025] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 23791.025] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23791.025] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 23791.025] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23791.025] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 23791.025] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 23791.025] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 23791.029] (II) modeset(0): EDID for output HDMI-2
[ 23791.029] (II) modeset(0): EDID for output DP-1
[ 23791.033] (II) modeset(0): EDID for output HDMI-3
[ 23791.033] (II) modeset(0): Output HDMI-1 connected
[ 23791.033] (II) modeset(0): Output HDMI-2 disconnected
[ 23791.033] (II) modeset(0): Output DP-1 disconnected
[ 23791.033] (II) modeset(0): Output HDMI-3 disconnected
[ 23791.033] (II) modeset(0): Using exact sizes for initial modes
[ 23791.033] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +0+0
[ 23791.033] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23791.033] (==) modeset(0): DPI set to (96, 96)
[ 23791.033] (II) Loading sub module "fb"
[ 23791.033] (II) LoadModule: "fb"
[ 23791.033] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23791.033] (II) Module fb: vendor="X.Org Foundation"
[ 23791.033] compiled for 1.20.5, module version = 1.0.0
[ 23791.033] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23791.033] (II) UnloadModule: "vesa"
[ 23791.033] (II) Unloading vesa
[ 23791.035] (==) modeset(0): Backing store enabled
[ 23791.035] (==) modeset(0): Silken mouse disabled
[ 23791.165] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 23791.165] (==) modeset(0): DPMS enabled
[ 23791.166] (II) modeset(0): [DRI2] Setup complete
[ 23791.166] (II) modeset(0): [DRI2] DRI driver: i965
[ 23791.166] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 23791.166] (II) Initializing extension Generic Event Extension
[ 23791.167] (II) Initializing extension SHAPE
[ 23791.167] (II) Initializing extension MIT-SHM
[ 23791.167] (II) Initializing extension XInputExtension
[ 23791.168] (II) Initializing extension XTEST
[ 23791.168] (II) Initializing extension BIG-REQUESTS
[ 23791.168] (II) Initializing extension SYNC
[ 23791.169] (II) Initializing extension XKEYBOARD
[ 23791.169] (II) Initializing extension XC-MISC
[ 23791.169] (II) Initializing extension SECURITY
[ 23791.170] (II) Initializing extension XFIXES
[ 23791.170] (II) Initializing extension RENDER
[ 23791.170] (II) Initializing extension RANDR
[ 23791.171] (II) Initializing extension COMPOSITE
[ 23791.171] (II) Initializing extension DAMAGE
[ 23791.171] (II) Initializing extension MIT-SCREEN-SAVER
[ 23791.172] (II) Initializing extension DOUBLE-BUFFER
[ 23791.172] (II) Initializing extension RECORD
[ 23791.172] (II) Initializing extension DPMS
[ 23791.173] (II) Initializing extension Present
[ 23791.173] (II) Initializing extension DRI3
[ 23791.173] (II) Initializing extension X-Resource
[ 23791.174] (II) Initializing extension XVideo
[ 23791.174] (II) Initializing extension XVideo-MotionCompensation
[ 23791.174] (II) Initializing extension GLX
[ 23791.188] (II) AIGLX: Loaded and initialized i965
[ 23791.188] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23791.188] (II) Initializing extension XFree86-VidModeExtension
[ 23791.189] (II) Initializing extension XFree86-DGA
[ 23791.189] (II) Initializing extension XFree86-DRI
[ 23791.189] (II) Initializing extension DRI2
[ 23791.196] (II) modeset(0): Damage tracking initialized
[ 23791.196] (II) modeset(0): Setting screen physical size to 508 x 285
[ 23791.249] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 23791.249] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 23791.249] (II) LoadModule: "libinput"
[ 23791.249] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 23791.250] (II) Module libinput: vendor="X.Org Foundation"
[ 23791.250] compiled for 1.20.5, module version = 0.29.0
[ 23791.250] Module class: X.Org XInput Driver
[ 23791.250] ABI class: X.Org XInput driver, version 24.1
[ 23791.250] (II) Using input driver 'libinput' for 'Power Button'
[ 23791.250] (**) Power Button: always reports core events
[ 23791.250] (**) Option "Device" "/dev/input/event2"
[ 23791.250] (**) Option "_source" "server/udev"
[ 23791.251] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 23791.251] (II) event2 - Power Button: device is a keyboard
[ 23791.251] (II) event2 - Power Button: device removed
[ 23791.278] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 23791.278] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 23791.278] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 23791.278] (II) event2 - Power Button: device is a keyboard
[ 23791.279] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 23791.279] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 23791.279] (II) Using input driver 'libinput' for 'Video Bus'
[ 23791.279] (**) Video Bus: always reports core events
[ 23791.279] (**) Option "Device" "/dev/input/event5"
[ 23791.279] (**) Option "_source" "server/udev"
[ 23791.279] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 23791.279] (II) event5 - Video Bus: device is a keyboard
[ 23791.279] (II) event5 - Video Bus: device removed
[ 23791.331] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event5"
[ 23791.331] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 23791.334] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 23791.334] (II) event5 - Video Bus: device is a keyboard
[ 23791.335] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 23791.335] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 23791.335] (II) Using input driver 'libinput' for 'Power Button'
[ 23791.335] (**) Power Button: always reports core events
[ 23791.335] (**) Option "Device" "/dev/input/event1"
[ 23791.335] (**) Option "_source" "server/udev"
[ 23791.337] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 23791.337] (II) event1 - Power Button: device is a keyboard
[ 23791.337] (II) event1 - Power Button: device removed
[ 23791.385] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 23791.385] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 23791.386] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 23791.386] (II) event1 - Power Button: device is a keyboard
[ 23791.387] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 23791.387] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 23791.387] (II) Using input driver 'libinput' for 'Sleep Button'
[ 23791.387] (**) Sleep Button: always reports core events
[ 23791.387] (**) Option "Device" "/dev/input/event0"
[ 23791.387] (**) Option "_source" "server/udev"
[ 23791.388] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 23791.388] (II) event0 - Sleep Button: device is a keyboard
[ 23791.388] (II) event0 - Sleep Button: device removed
[ 23791.425] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 23791.425] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 23791.427] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 23791.427] (II) event0 - Sleep Button: device is a keyboard
[ 23791.430] (II) config/udev: Adding input device Logitech K360 (/dev/input/event6)
[ 23791.430] (**) Logitech K360: Applying InputClass "libinput keyboard catchall"
[ 23791.430] (II) Using input driver 'libinput' for 'Logitech K360'
[ 23791.430] (**) Logitech K360: always reports core events
[ 23791.430] (**) Option "Device" "/dev/input/event6"
[ 23791.430] (**) Option "_source" "server/udev"
[ 23791.434] (II) event6 - Logitech K360: is tagged by udev as: Keyboard
[ 23791.434] (II) event6 - Logitech K360: device is a keyboard
[ 23791.435] (II) event6 - Logitech K360: device removed
[ 23791.465] (II) libinput: Logitech K360: needs a virtual subdevice
[ 23791.465] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input17/event6"
[ 23791.465] (II) XINPUT: Adding extended input device "Logitech K360" (type: MOUSE, id 10)
[ 23791.465] (**) Option "AccelerationScheme" "none"
[ 23791.465] (**) Logitech K360: (accel) selected scheme none/0
[ 23791.465] (**) Logitech K360: (accel) acceleration factor: 2.000
[ 23791.465] (**) Logitech K360: (accel) acceleration threshold: 4
[ 23791.469] (II) event6 - Logitech K360: is tagged by udev as: Keyboard
[ 23791.469] (II) event6 - Logitech K360: device is a keyboard
[ 23791.471] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/event3)
[ 23791.471] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Applying InputClass "libinput pointer catchall"
[ 23791.471] (II) Using input driver 'libinput' for 'Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)'
[ 23791.471] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events
[ 23791.472] (**) Option "Device" "/dev/input/event3"
[ 23791.472] (**) Option "_source" "server/udev"
[ 23791.531] (II) event3 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[ 23791.531] (II) event3 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): device is a pointer
[ 23791.531] (II) event3 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): device removed
[ 23791.585] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:045E:0047.0001/input/input3/event3"
[ 23791.585] (II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 11)
[ 23791.585] (**) Option "AccelerationScheme" "none"
[ 23791.585] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) selected scheme none/0
[ 23791.585] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 23791.585] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 23791.644] (II) event3 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[ 23791.645] (II) event3 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): device is a pointer
[ 23791.646] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[ 23791.646] (II) No input driver specified, ignoring this device.
[ 23791.646] (II) This device may have been added with another device file.
[ 23791.647] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 23791.647] (II) No input driver specified, ignoring this device.
[ 23791.647] (II) This device may have been added with another device file.
[ 23791.647] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 23791.647] (II) No input driver specified, ignoring this device.
[ 23791.647] (II) This device may have been added with another device file.
[ 23791.648] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 23791.648] (II) No input driver specified, ignoring this device.
[ 23791.648] (II) This device may have been added with another device file.
[ 23791.648] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 23791.648] (II) No input driver specified, ignoring this device.
[ 23791.648] (II) This device may have been added with another device file.
[ 23791.648] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 23791.648] (II) No input driver specified, ignoring this device.
[ 23791.648] (II) This device may have been added with another device file.
[ 23791.648] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[ 23791.648] (II) No input driver specified, ignoring this device.
[ 23791.648] (II) This device may have been added with another device file.
[ 23791.648] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[ 23791.648] (II) No input driver specified, ignoring this device.
[ 23791.648] (II) This device may have been added with another device file.
[ 23791.648] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[ 23791.648] (II) No input driver specified, ignoring this device.
[ 23791.648] (II) This device may have been added with another device file.
[ 23791.649] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[ 23791.649] (II) No input driver specified, ignoring this device.
[ 23791.649] (II) This device may have been added with another device file.
[ 23791.649] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event16)
[ 23791.649] (II) No input driver specified, ignoring this device.
[ 23791.649] (II) This device may have been added with another device file.
[ 23791.649] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event17)
[ 23791.649] (II) No input driver specified, ignoring this device.
[ 23791.649] (II) This device may have been added with another device file.
[ 23791.649] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event18)
[ 23791.649] (II) No input driver specified, ignoring this device.
[ 23791.649] (II) This device may have been added with another device file.
[ 23791.649] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event19)
[ 23791.649] (II) No input driver specified, ignoring this device.
[ 23791.649] (II) This device may have been added with another device file.
[ 23791.650] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 23791.650] (II) No input driver specified, ignoring this device.
[ 23791.650] (II) This device may have been added with another device file.
[ 23791.652] (**) Logitech K360: Applying InputClass "libinput keyboard catchall"
[ 23791.652] (II) Using input driver 'libinput' for 'Logitech K360'
[ 23791.652] (**) Logitech K360: always reports core events
[ 23791.652] (**) Option "Device" "/dev/input/event6"
[ 23791.652] (**) Option "_source" "_driver/libinput"
[ 23791.652] (II) libinput: Logitech K360: is a virtual subdevice
[ 23791.652] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input17/event6"
[ 23791.652] (II) XINPUT: Adding extended input device "Logitech K360" (type: KEYBOARD, id 12)
[ 23791.681] (EE) Failed to open authorization file "/var/run/sddm/{c159c9a8-14ef-4a32-9251-8ac025e87405}": No such file or directory
[ 25402.444] (II) event2 - Power Button: device removed
[ 25402.465] (II) event5 - Video Bus: device removed
[ 25402.531] (II) event1 - Power Button: device removed
[ 25402.555] (II) event0 - Sleep Button: device removed
[ 25402.581] (II) event3 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): device removed
[ 25402.638] (II) event6 - Logitech K360: device removed
[ 25402.664] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 25413.200] (II) UnloadModule: "libinput"
[ 25413.200] (II) UnloadModule: "libinput"
[ 25413.201] (II) UnloadModule: "libinput"
[ 25413.201] (II) UnloadModule: "libinput"
[ 25413.201] (II) UnloadModule: "libinput"
[ 25413.201] (II) UnloadModule: "libinput"
[ 25413.201] (II) UnloadModule: "libinput"
[ 25413.203] (II) Server terminated successfully (0). Closing log file.Output of dmesg:
[ 0.000000] microcode: microcode updated early to revision 0xcc, date = 2019-04-01
[ 0.000000] Linux version 5.2.11-arch1-1-ARCH (builduser@heftig-107976) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Thu Aug 29 08:09:36 UTC 2019
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda3 rw
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000079ea8fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079ea9000-0x0000000079ea9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079eaa000-0x0000000079eaafff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079eab000-0x0000000089feefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000089fef000-0x000000008a325fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008a326000-0x000000008a48dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a48e000-0x000000008ab33fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008ab34000-0x000000008b3fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008b3ff000-0x000000008b3fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008b400000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x771cf018-0x771df057] usable ==> usable
[ 0.000000] e820: update [mem 0x771cf018-0x771df057] usable ==> usable
[ 0.000000] e820: update [mem 0x79f59018-0x79f65057] usable ==> usable
[ 0.000000] e820: update [mem 0x79f59018-0x79f65057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000771cf017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000771cf018-0x00000000771df057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000771df058-0x0000000079ea8fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000079ea9000-0x0000000079ea9fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000079eaa000-0x0000000079eaafff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000079eab000-0x0000000079f59017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000079f59018-0x0000000079f65057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000079f65058-0x0000000089feefff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000089fef000-0x000000008a325fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008a326000-0x000000008a48dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008a48e000-0x000000008ab33fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008ab34000-0x000000008b3fefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008b3ff000-0x000000008b3fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008b400000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000086effffff] usable
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x8a78e000 ACPI=0x8a78e000 SMBIOS=0x8b2b4000 MPS=0xfca00 ESRT=0x8835db18
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: MSI MS-7976/Z170A GAMING M7 (MS-7976), BIOS 1.L0 06/28/2018
[ 0.000000] tsc: Detected 4000.000 MHz processor
[ 0.001104] tsc: Detected 4008.000 MHz TSC
[ 0.001105] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001106] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001110] last_pfn = 0x86f000 max_arch_pfn = 0x400000000
[ 0.001112] MTRR default type: write-back
[ 0.001113] MTRR fixed ranges enabled:
[ 0.001114] 00000-9FFFF write-back
[ 0.001114] A0000-BFFFF uncachable
[ 0.001115] C0000-FFFFF write-protect
[ 0.001115] MTRR variable ranges enabled:
[ 0.001116] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.001117] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.001117] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.001118] 3 base 008C000000 mask 7FFC000000 uncachable
[ 0.001118] 4 base 008B800000 mask 7FFF800000 uncachable
[ 0.001118] 5 disabled
[ 0.001119] 6 disabled
[ 0.001119] 7 disabled
[ 0.001119] 8 disabled
[ 0.001120] 9 disabled
[ 0.001939] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002129] last_pfn = 0x8b400 max_arch_pfn = 0x400000000
[ 0.007117] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f]
[ 0.007126] esrt: Reserving ESRT space from 0x000000008835db18 to 0x000000008835db50.
[ 0.007134] check: Scanning 1 areas for low memory corruption
[ 0.007137] Using GB pages for direct mapping
[ 0.007138] BRK [0x2c4001000, 0x2c4001fff] PGTABLE
[ 0.007139] BRK [0x2c4002000, 0x2c4002fff] PGTABLE
[ 0.007140] BRK [0x2c4003000, 0x2c4003fff] PGTABLE
[ 0.007156] BRK [0x2c4004000, 0x2c4004fff] PGTABLE
[ 0.007157] BRK [0x2c4005000, 0x2c4005fff] PGTABLE
[ 0.007223] BRK [0x2c4006000, 0x2c4006fff] PGTABLE
[ 0.007238] BRK [0x2c4007000, 0x2c4007fff] PGTABLE
[ 0.007260] BRK [0x2c4008000, 0x2c4008fff] PGTABLE
[ 0.007288] BRK [0x2c4009000, 0x2c4009fff] PGTABLE
[ 0.007318] BRK [0x2c400a000, 0x2c400afff] PGTABLE
[ 0.007319] BRK [0x2c400b000, 0x2c400bfff] PGTABLE
[ 0.007365] BRK [0x2c400c000, 0x2c400cfff] PGTABLE
[ 0.007399] Secure boot disabled
[ 0.007399] RAMDISK: [mem 0x771e0000-0x77d1efff]
[ 0.007404] ACPI: Early table checksum verification disabled
[ 0.007406] ACPI: RSDP 0x000000008A78E000 000024 (v02 ALASKA)
[ 0.007408] ACPI: XSDT 0x000000008A78E0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007411] ACPI: FACP 0x000000008A7B4DD8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.007414] ACPI: DSDT 0x000000008A78E1F0 026BE4 (v02 ALASKA A M I 01072009 INTL 20160422)
[ 0.007416] ACPI: FACS 0x000000008AB33C40 000040
[ 0.007417] ACPI: APIC 0x000000008A7B4EF0 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.007419] ACPI: FPDT 0x000000008A7B4FB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007421] ACPI: MCFG 0x000000008A7B4FF8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.007422] ACPI: SSDT 0x000000008A7B5038 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.007424] ACPI: FIDT 0x000000008A7B53F8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007425] ACPI: SSDT 0x000000008A7B5498 003159 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.007427] ACPI: SSDT 0x000000008A7B85F8 00255F (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.007429] ACPI: HPET 0x000000008A7BAB58 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
[ 0.007430] ACPI: SSDT 0x000000008A7BAB90 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 0.007432] ACPI: SSDT 0x000000008A7BB978 000A29 (v02 INTEL xh_rvp08 00000000 INTL 20160422)
[ 0.007433] ACPI: UEFI 0x000000008A7BC3A8 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.007435] ACPI: SSDT 0x000000008A7BC3F0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.007436] ACPI: LPIT 0x000000008A7BD2D0 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.007438] ACPI: WSMT 0x000000008A7BD368 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.007439] ACPI: SSDT 0x000000008A7BD390 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.007441] ACPI: SSDT 0x000000008A7BD630 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.007442] ACPI: DBGP 0x000000008A7C0638 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.007444] ACPI: DBG2 0x000000008A7C0670 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.007448] ACPI: Local APIC address 0xfee00000
[ 0.007599] No NUMA configuration found
[ 0.007599] Faking a node at [mem 0x0000000000000000-0x000000086effffff]
[ 0.007601] NODE_DATA(0) allocated [mem 0x86effc000-0x86effffff]
[ 0.007623] Zone ranges:
[ 0.007623] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007624] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007625] Normal [mem 0x0000000100000000-0x000000086effffff]
[ 0.007625] Device empty
[ 0.007626] Movable zone start for each node
[ 0.007626] Early memory node ranges
[ 0.007627] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.007627] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.007627] node 0: [mem 0x0000000000100000-0x0000000079ea8fff]
[ 0.007628] node 0: [mem 0x0000000079eab000-0x0000000089feefff]
[ 0.007628] node 0: [mem 0x000000008a326000-0x000000008a48dfff]
[ 0.007629] node 0: [mem 0x000000008b3ff000-0x000000008b3fffff]
[ 0.007629] node 0: [mem 0x0000000100000000-0x000000086effffff]
[ 0.007715] Zeroed struct page in unavailable ranges: 24333 pages
[ 0.007716] Initmem setup node 0 [mem 0x0000000000001000-0x000000086effffff]
[ 0.007717] On node 0 totalpages: 8360179
[ 0.007721] DMA zone: 64 pages used for memmap
[ 0.007721] DMA zone: 26 pages reserved
[ 0.007723] DMA zone: 3997 pages, LIFO batch:0
[ 0.007750] DMA32 zone: 8774 pages used for memmap
[ 0.007751] DMA32 zone: 561494 pages, LIFO batch:63
[ 0.012238] Normal zone: 121792 pages used for memmap
[ 0.012239] Normal zone: 7794688 pages, LIFO batch:63
[ 0.063385] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
[ 0.063542] ACPI: PM-Timer IO Port: 0x1808
[ 0.063543] ACPI: Local APIC address 0xfee00000
[ 0.063547] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.063547] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.063548] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.063548] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.063548] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.063549] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.063549] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.063549] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.063575] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.063576] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.063577] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.063578] ACPI: IRQ0 used by override.
[ 0.063578] ACPI: IRQ9 used by override.
[ 0.063580] Using ACPI (MADT) for SMP configuration information
[ 0.063580] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.063583] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.063595] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.063596] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.063596] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.063597] PM: Registered nosave memory: [mem 0x771cf000-0x771cffff]
[ 0.063598] PM: Registered nosave memory: [mem 0x771df000-0x771dffff]
[ 0.063599] PM: Registered nosave memory: [mem 0x79ea9000-0x79ea9fff]
[ 0.063599] PM: Registered nosave memory: [mem 0x79eaa000-0x79eaafff]
[ 0.063600] PM: Registered nosave memory: [mem 0x79f59000-0x79f59fff]
[ 0.063601] PM: Registered nosave memory: [mem 0x79f65000-0x79f65fff]
[ 0.063602] PM: Registered nosave memory: [mem 0x89fef000-0x8a325fff]
[ 0.063603] PM: Registered nosave memory: [mem 0x8a48e000-0x8ab33fff]
[ 0.063603] PM: Registered nosave memory: [mem 0x8ab34000-0x8b3fefff]
[ 0.063604] PM: Registered nosave memory: [mem 0x8b400000-0x8fffffff]
[ 0.063605] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[ 0.063605] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.063605] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.063606] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.063606] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.063606] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.063607] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.063607] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.063607] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[ 0.063608] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.063608] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.063608] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.063610] [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.063610] Booting paravirtualized kernel on bare hardware
[ 0.063612] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.122949] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.123062] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[ 0.123066] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[ 0.123067] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.123079] Built 1 zonelists, mobility grouping on. Total pages: 8229523
[ 0.123080] Policy zone: Normal
[ 0.123080] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda3 rw
[ 0.125258] Calgary: detecting Calgary via BIOS EBDA area
[ 0.125260] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.176828] Memory: 32543076K/33440716K available (12291K kernel code, 1319K rwdata, 3904K rodata, 1608K init, 3616K bss, 897640K reserved, 0K cma-reserved)
[ 0.176903] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.176910] Kernel/User page tables isolation: enabled
[ 0.176920] ftrace: allocating 37395 entries in 147 pages
[ 0.185907] rcu: Preemptible hierarchical RCU implementation.
[ 0.185908] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.185908] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.185909] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.185909] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.185910] Tasks RCU enabled.
[ 0.185910] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.185910] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.186991] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[ 0.187165] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.187291] random: get_random_bytes called from start_kernel+0x37e/0x559 with crng_init=0
[ 0.187306] Console: colour dummy device 80x25
[ 0.187309] printk: console [tty0] enabled
[ 0.187321] ACPI: Core revision 20190509
[ 0.187572] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.187602] hpet clockevent registered
[ 0.187636] APIC: Switch to symmetric I/O mode setup
[ 0.188834] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.193026] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.207610] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39c5e21a6f1, max_idle_ns: 440795312983 ns
[ 0.207613] Calibrating delay loop (skipped), value calculated using timer frequency.. 8019.00 BogoMIPS (lpj=13360000)
[ 0.207615] pid_max: default: 32768 minimum: 301
[ 0.212657] LSM: Security Framework initializing
[ 0.212659] Yama: becoming mindful.
[ 0.215676] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.217182] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.217240] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.217283] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.217367] *** VALIDATE proc ***
[ 0.217403] *** VALIDATE cgroup1 ***
[ 0.217404] *** VALIDATE cgroup2 ***
[ 0.217434] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.217446] process: using mwait in idle threads
[ 0.217447] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.217448] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.217449] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.217449] Spectre V2 : Mitigation: Full generic retpoline
[ 0.217450] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.217450] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.217451] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.217451] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.217452] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.217454] MDS: Mitigation: Clear CPU buffers
[ 0.217615] Freeing SMP alternatives memory: 32K
[ 0.218680] TSC deadline timer enabled
[ 0.218685] smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.237616] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.237622] ... version: 4
[ 0.237622] ... bit width: 48
[ 0.237622] ... generic registers: 4
[ 0.237623] ... value mask: 0000ffffffffffff
[ 0.237623] ... max period: 00007fffffffffff
[ 0.237623] ... fixed-purpose events: 3
[ 0.237624] ... event mask: 000000070000000f
[ 0.244280] rcu: Hierarchical SRCU implementation.
[ 0.267716] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.274283] smp: Bringing up secondary CPUs ...
[ 0.314286] x86: Booting SMP configuration:
[ 0.314287] .... node #0, CPUs: #1 #2 #3 #4
[ 0.434763] MDS CPU bug present and SMT on, data leak possible. See [url]https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html[/url] for more details.
[ 0.474288] #5 #6 #7
[ 0.554585] smp: Brought up 1 node, 8 CPUs
[ 0.554585] smpboot: Max logical packages: 1
[ 0.554585] smpboot: Total of 8 processors activated (64153.00 BogoMIPS)
[ 0.558104] devtmpfs: initialized
[ 0.558104] x86/mm: Memory block size: 128MB
[ 0.558875] PM: Registering ACPI NVS region [mem 0x79ea9000-0x79ea9fff] (4096 bytes)
[ 0.558875] PM: Registering ACPI NVS region [mem 0x8a48e000-0x8ab33fff] (6971392 bytes)
[ 0.558875] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.558875] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.558875] pinctrl core: initialized pinctrl subsystem
[ 0.558875] PM: RTC time: 22:09:05, date: 2019-08-31
[ 0.558875] NET: Registered protocol family 16
[ 0.558875] audit: initializing netlink subsys (disabled)
[ 0.558875] audit: type=2000 audit(1567289345.373:1): state=initialized audit_enabled=0 res=1
[ 0.558875] cpuidle: using governor ladder
[ 0.560950] cpuidle: using governor menu
[ 0.560965] KVM setup pv remote TLB flush
[ 0.560967] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.560968] ACPI: bus type PCI registered
[ 0.560969] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.561009] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.561011] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.561019] PCI: Using configuration type 1 for base access
[ 0.561767] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.561767] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.561767] ACPI: Added _OSI(Module Device)
[ 0.561767] ACPI: Added _OSI(Processor Device)
[ 0.561767] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.561767] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.561767] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.561767] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.561767] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.587176] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.590199] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.593133] ACPI: Dynamic OEM Table Load:
[ 0.593137] ACPI: SSDT 0xFFFF96EA8AE80800 0007DD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.593572] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.594594] ACPI: Dynamic OEM Table Load:
[ 0.594597] ACPI: SSDT 0xFFFF96EA8AACE800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.594946] ACPI: Dynamic OEM Table Load:
[ 0.594948] ACPI: SSDT 0xFFFF96EA8AAA7200 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.595199] ACPI: Dynamic OEM Table Load:
[ 0.595201] ACPI: SSDT 0xFFFF96EA8AAA7800 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
[ 0.595706] ACPI: Dynamic OEM Table Load:
[ 0.595710] ACPI: SSDT 0xFFFF96EA8AE85800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.596247] ACPI: Dynamic OEM Table Load:
[ 0.596249] ACPI: SSDT 0xFFFF96EA8AAA6000 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.596572] ACPI: Dynamic OEM Table Load:
[ 0.596575] ACPI: SSDT 0xFFFF96EA8AAA7A00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.599605] ACPI: Interpreter enabled
[ 0.599631] ACPI: (supports S0 S3 S4 S5)
[ 0.599632] ACPI: Using IOAPIC for interrupt routing
[ 0.599657] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.600417] ACPI: Enabled 9 GPEs in block 00 to 7F
[ 0.602384] ACPI: Power Resource [PG00] (on)
[ 0.602719] ACPI: Power Resource [PG01] (on)
[ 0.603046] ACPI: Power Resource [PG02] (on)
[ 0.607739] ACPI: Power Resource [WRST] (on)
[ 0.608003] ACPI: Power Resource [WRST] (on)
[ 0.608266] ACPI: Power Resource [WRST] (on)
[ 0.608529] ACPI: Power Resource [WRST] (on)
[ 0.608795] ACPI: Power Resource [WRST] (on)
[ 0.609060] ACPI: Power Resource [WRST] (on)
[ 0.609325] ACPI: Power Resource [WRST] (on)
[ 0.609596] ACPI: Power Resource [WRST] (on)
[ 0.609859] ACPI: Power Resource [WRST] (on)
[ 0.610122] ACPI: Power Resource [WRST] (on)
[ 0.610384] ACPI: Power Resource [WRST] (on)
[ 0.610646] ACPI: Power Resource [WRST] (on)
[ 0.610905] ACPI: Power Resource [WRST] (on)
[ 0.611169] ACPI: Power Resource [WRST] (on)
[ 0.611430] ACPI: Power Resource [WRST] (on)
[ 0.611691] ACPI: Power Resource [WRST] (on)
[ 0.611952] ACPI: Power Resource [WRST] (on)
[ 0.612965] ACPI: Power Resource [WRST] (on)
[ 0.613229] ACPI: Power Resource [WRST] (on)
[ 0.613492] ACPI: Power Resource [WRST] (on)
[ 0.620945] ACPI: Power Resource [FN00] (off)
[ 0.620945] ACPI: Power Resource [FN01] (off)
[ 0.620945] ACPI: Power Resource [FN02] (off)
[ 0.620945] ACPI: Power Resource [FN03] (off)
[ 0.620945] ACPI: Power Resource [FN04] (off)
[ 0.620945] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.620945] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.620945] acpi PNP0A08:00: _OSC: platform does not support [PME AER]
[ 0.620945] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PCIeCapability LTR]
[ 0.620945] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.621416] PCI host bridge to bus 0000:00
[ 0.621417] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.621418] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.621419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.621419] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[ 0.621420] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.621421] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.621425] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.621687] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[ 0.621694] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[ 0.621698] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.621700] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.621710] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.621828] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.621835] pci 0000:00:08.0: reg 0x10: [mem 0xde232000-0xde232fff 64bit]
[ 0.621969] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.621986] pci 0000:00:14.0: reg 0x10: [mem 0xde210000-0xde21ffff 64bit]
[ 0.622038] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.622206] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.622223] pci 0000:00:14.2: reg 0x10: [mem 0xde231000-0xde231fff 64bit]
[ 0.622395] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
[ 0.622438] pci 0000:00:15.0: reg 0x10: [mem 0xde230000-0xde230fff 64bit]
[ 0.622661] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
[ 0.622705] pci 0000:00:15.1: reg 0x10: [mem 0xde22f000-0xde22ffff 64bit]
[ 0.622934] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.622949] pci 0000:00:16.0: reg 0x10: [mem 0xde22e000-0xde22efff 64bit]
[ 0.622992] pci 0000:00:16.0: PME# supported from D3hot
[ 0.623129] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.623142] pci 0000:00:17.0: reg 0x10: [mem 0xde228000-0xde229fff]
[ 0.623147] pci 0000:00:17.0: reg 0x14: [mem 0xde22d000-0xde22d0ff]
[ 0.623152] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.623157] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.623163] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.623168] pci 0000:00:17.0: reg 0x24: [mem 0xde22c000-0xde22c7ff]
[ 0.623198] pci 0000:00:17.0: PME# supported from D3hot
[ 0.623325] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.623384] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.623528] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[ 0.623585] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.623781] pci 0000:00:1e.0: [8086:a127] type 00 class 0x118000
[ 0.623826] pci 0000:00:1e.0: reg 0x10: [mem 0xde22b000-0xde22bfff 64bit]
[ 0.624065] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
[ 0.624267] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.624278] pci 0000:00:1f.2: reg 0x10: [mem 0xde224000-0xde227fff]
[ 0.627757] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.627778] pci 0000:00:1f.3: reg 0x10: [mem 0xde220000-0xde223fff 64bit]
[ 0.627799] pci 0000:00:1f.3: reg 0x20: [mem 0xde200000-0xde20ffff 64bit]
[ 0.627839] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.628008] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.628067] pci 0000:00:1f.4: reg 0x10: [mem 0xde22a000-0xde22a0ff 64bit]
[ 0.628136] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.628377] pci 0000:01:00.0: [1b21:1242] type 00 class 0x0c0330
[ 0.628405] pci 0000:01:00.0: reg 0x10: [mem 0xde100000-0xde107fff 64bit]
[ 0.628451] pci 0000:01:00.0: enabling Extended Tags
[ 0.628519] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.628629] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.628632] pci 0000:00:1c.0: bridge window [mem 0xde100000-0xde1fffff]
[ 0.628692] pci 0000:02:00.0: [1969:e0a1] type 00 class 0x020000
[ 0.628720] pci 0000:02:00.0: reg 0x10: [mem 0xde000000-0xde03ffff 64bit]
[ 0.628729] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.628828] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.628932] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.628934] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.628936] pci 0000:00:1c.2: bridge window [mem 0xde000000-0xde0fffff]
[ 0.631543] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.631588] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.631631] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.631675] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.631717] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.631759] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.631801] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.631843] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.632316] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.632316] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.632316] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.632316] vgaarb: loaded
[ 0.632316] ACPI: bus type USB registered
[ 0.632316] usbcore: registered new interface driver usbfs
[ 0.632316] usbcore: registered new interface driver hub
[ 0.632316] usbcore: registered new device driver usb
[ 0.632316] pps_core: LinuxPPS API ver. 1 registered
[ 0.632316] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.632316] PTP clock support registered
[ 0.632316] EDAC MC: Ver: 3.0.0
[ 0.632316] Registered efivars operations
[ 0.657875] PCI: Using ACPI for IRQ routing
[ 0.683481] PCI: pci_cache_line_size set to 64 bytes
[ 0.683565] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.683566] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.683566] e820: reserve RAM buffer [mem 0x771cf018-0x77ffffff]
[ 0.683567] e820: reserve RAM buffer [mem 0x79ea9000-0x7bffffff]
[ 0.683567] e820: reserve RAM buffer [mem 0x79f59018-0x7bffffff]
[ 0.683568] e820: reserve RAM buffer [mem 0x89fef000-0x8bffffff]
[ 0.683568] e820: reserve RAM buffer [mem 0x8a48e000-0x8bffffff]
[ 0.683569] e820: reserve RAM buffer [mem 0x8b400000-0x8bffffff]
[ 0.683569] e820: reserve RAM buffer [mem 0x86f000000-0x86fffffff]
[ 0.684279] NetLabel: Initializing
[ 0.684279] NetLabel: domain hash size = 128
[ 0.684279] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.684279] NetLabel: unlabeled traffic allowed by default
[ 0.684647] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.684649] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.688652] clocksource: Switched to clocksource tsc-early
[ 0.694289] VFS: Disk quotas dquot_6.6.0
[ 0.694299] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.694313] *** VALIDATE hugetlbfs ***
[ 0.694335] pnp: PnP ACPI init
[ 0.694582] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.694583] system 00:00: [io 0x0a10-0x0a1f] has been reserved
[ 0.694584] system 00:00: [io 0x0a20-0x0a2f] has been reserved
[ 0.694585] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 0.694587] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.694717] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.694717] system 00:01: [io 0xffff] has been reserved
[ 0.694718] system 00:01: [io 0xffff] has been reserved
[ 0.694719] system 00:01: [io 0xffff] has been reserved
[ 0.694719] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.694720] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.694722] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.694785] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.694787] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.694799] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.694824] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.694825] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.695000] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.695001] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.695002] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.695003] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.695003] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.695004] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.695005] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.695005] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.695006] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.695007] system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.695009] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.695036] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.695037] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.695038] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.695040] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.695040] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.695041] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.695043] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.695259] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.695261] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.696069] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.696800] pnp: PnP ACPI: found 9 devices
[ 0.701998] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.702004] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.702007] pci 0000:00:1c.0: bridge window [mem 0xde100000-0xde1fffff]
[ 0.702011] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.702012] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.702014] pci 0000:00:1c.2: bridge window [mem 0xde000000-0xde0fffff]
[ 0.702019] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.702020] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.702020] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.702021] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[ 0.702022] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.702022] pci_bus 0000:01: resource 1 [mem 0xde100000-0xde1fffff]
[ 0.702023] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.702023] pci_bus 0000:02: resource 1 [mem 0xde000000-0xde0fffff]
[ 0.702140] NET: Registered protocol family 2
[ 0.702220] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.702287] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.702473] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.702549] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.702578] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.702628] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.702703] NET: Registered protocol family 1
[ 0.702705] NET: Registered protocol family 44
[ 0.702710] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.703064] PCI: CLS 64 bytes, default 64
[ 0.703082] Trying to unpack rootfs image as initramfs...
[ 0.782092] Freeing initrd memory: 11516K
[ 0.782096] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.782097] software IO TLB: mapped [mem 0x731cd000-0x771cd000] (64MB)
[ 0.782116] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e21a6f1, max_idle_ns: 440795312983 ns
[ 0.782135] clocksource: Switched to clocksource tsc
[ 0.782222] check: Scanning for low memory corruption every 60 seconds
[ 0.782588] Initialise system trusted keyrings
[ 0.782594] Key type blacklist registered
[ 0.782619] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 0.783304] zbud: loaded
[ 0.784299] Key type asymmetric registered
[ 0.784300] Asymmetric key parser 'x509' registered
[ 0.784313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.784346] io scheduler mq-deadline registered
[ 0.784347] io scheduler kyber registered
[ 0.784373] io scheduler bfq registered
[ 0.784706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.784750] efifb: probing for efifb
[ 0.784759] efifb: No BGRT, not showing boot graphics
[ 0.784759] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[ 0.784760] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.784760] efifb: scrolling: redraw
[ 0.784761] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.784782] fbcon: Deferring console take-over
[ 0.784783] fb0: EFI VGA frame buffer device
[ 0.784787] intel_idle: MWAIT substates: 0x142120
[ 0.784788] intel_idle: v0.4.1 model 0x5E
[ 0.785045] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.785105] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.785111] ACPI: Sleep Button [SLPB]
[ 0.785129] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.785132] ACPI: Power Button [PWRB]
[ 0.785150] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.787658] ACPI: Power Button [PWRF]
[ 0.887893] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.887894] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.888013] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.888014] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.888221] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.909197] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.930265] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.930927] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.930928] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.931705] usbcore: registered new interface driver usbserial_generic
[ 0.931708] usbserial: USB Serial support registered for generic
[ 0.931721] rtc_cmos 00:03: RTC can wake from S4
[ 0.932153] rtc_cmos 00:03: registered as rtc0
[ 0.932162] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.932193] intel_pstate: Intel P-state driver initializing
[ 0.932570] intel_pstate: HWP enabled
[ 0.932771] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.932800] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff]
[ 0.932802] caller pmc_core_probe+0x8f/0x2dd mapping multiple BARs
[ 0.932812] intel_pmc_core intel_pmc_core.0: initialized
[ 0.932927] NET: Registered protocol family 10
[ 0.937424] Segment Routing with IPv6
[ 0.937435] NET: Registered protocol family 17
[ 0.937733] mce: Using 10 MCE banks
[ 0.937743] RAS: Correctable Errors collector initialized.
[ 0.937761] microcode: sig=0x506e3, pf=0x2, revision=0xcc
[ 0.937873] microcode: Microcode Update Driver: v2.2.
[ 0.937880] sched_clock: Marking stable (940850084, -2978902)->(944329872, -6458690)
[ 0.938179] registered taskstats version 1
[ 0.938186] Loading compiled-in X.509 certificates
[ 0.940457] Loaded X.509 cert 'Build time autogenerated kernel key: 12f49d339d879888f73b01bf952385086361e4d8'
[ 0.940472] zswap: loaded using pool lzo/zbud
[ 0.944552] Key type big_key registered
[ 0.945337] PM: Magic number: 15:294:200
[ 0.945361] acpi device:55: hash matches
[ 0.945521] rtc_cmos 00:03: setting system clock to 2019-08-31T22:09:06 UTC (1567289346)
[ 0.946368] Freeing unused decrypted memory: 2040K
[ 0.946577] Freeing unused kernel image memory: 1608K
[ 1.011089] Write protecting the kernel read-only data: 18432k
[ 1.011847] Freeing unused kernel image memory: 2012K
[ 1.012032] Freeing unused kernel image memory: 192K
[ 1.033075] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.033077] x86/mm: Checking user space page tables
[ 1.050958] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.050960] Run /init as init process
[ 1.119703] fbcon: Taking over console
[ 1.119740] Console: switching to colour frame buffer device 128x48
[ 1.174881] SCSI subsystem initialized
[ 1.177077] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.177081] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.178138] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 1.178142] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.178269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 1.178270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.178270] usb usb1: Product: xHCI Host Controller
[ 1.178271] usb usb1: Manufacturer: Linux 5.2.11-arch1-1-ARCH xhci-hcd
[ 1.178272] usb usb1: SerialNumber: 0000:00:14.0
[ 1.178364] hub 1-0:1.0: USB hub found
[ 1.178382] hub 1-0:1.0: 16 ports detected
[ 1.179727] libata version 3.00 loaded.
[ 1.180256] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.180259] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.180262] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.180294] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[ 1.180296] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180297] usb usb2: Product: xHCI Host Controller
[ 1.180298] usb usb2: Manufacturer: Linux 5.2.11-arch1-1-ARCH xhci-hcd
[ 1.180299] usb usb2: SerialNumber: 0000:00:14.0
[ 1.180376] hub 2-0:1.0: USB hub found
[ 1.180389] hub 2-0:1.0: 10 ports detected
[ 1.181271] usb: port power management may be unreliable
[ 1.181764] ahci 0000:00:17.0: version 3.0
[ 1.181927] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.181930] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[ 1.192026] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.192027] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 1.240792] xhci_hcd 0000:01:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
[ 1.240938] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 1.240939] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240940] usb usb3: Product: xHCI Host Controller
[ 1.240940] usb usb3: Manufacturer: Linux 5.2.11-arch1-1-ARCH xhci-hcd
[ 1.240941] usb usb3: SerialNumber: 0000:01:00.0
[ 1.241035] hub 3-0:1.0: USB hub found
[ 1.241042] hub 3-0:1.0: 2 ports detected
[ 1.241128] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.241131] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4
[ 1.241132] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.241155] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.241171] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[ 1.241172] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.241173] usb usb4: Product: xHCI Host Controller
[ 1.241174] usb usb4: Manufacturer: Linux 5.2.11-arch1-1-ARCH xhci-hcd
[ 1.241175] usb usb4: SerialNumber: 0000:01:00.0
[ 1.241279] hub 4-0:1.0: USB hub found
[ 1.241285] hub 4-0:1.0: 2 ports detected
[ 1.241536] scsi host0: ahci
[ 1.241691] scsi host1: ahci
[ 1.241798] scsi host2: ahci
[ 1.241888] scsi host3: ahci
[ 1.242041] scsi host4: ahci
[ 1.242320] scsi host5: ahci
[ 1.242366] ata1: SATA max UDMA/133 abar m2048@0xde22c000 port 0xde22c100 irq 123
[ 1.242368] ata2: SATA max UDMA/133 abar m2048@0xde22c000 port 0xde22c180 irq 123
[ 1.242369] ata3: SATA max UDMA/133 abar m2048@0xde22c000 port 0xde22c200 irq 123
[ 1.242370] ata4: SATA max UDMA/133 abar m2048@0xde22c000 port 0xde22c280 irq 123
[ 1.242372] ata5: SATA max UDMA/133 abar m2048@0xde22c000 port 0xde22c300 irq 123
[ 1.242373] ata6: SATA max UDMA/133 abar m2048@0xde22c000 port 0xde22c380 irq 123
[ 1.507687] usb 1-4: new low-speed USB device number 2 using xhci_hcd
[ 1.554829] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.558215] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.558357] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.558383] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.558457] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.558484] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.560718] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.560724] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.560729] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.562167] ata1.00: ATA-11: WDC WDS100T2B0B-00YS70, X61130WD, max UDMA/133
[ 1.562172] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.564865] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.564871] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.564876] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.566574] ata1.00: configured for UDMA/133
[ 1.567007] scsi 0:0:0:0: Direct-Access ATA WDC WDS100T2B0B- 30WD PQ: 0 ANSI: 5
[ 1.579506] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.579548] sd 0:0:0:0: [sda] Write Protect is off
[ 1.579556] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.579620] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.582554] sda: sda1 sda2 sda3
[ 1.583695] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.652368] usb 1-4: New USB device found, idVendor=045e, idProduct=0047, bcdDevice= 3.00
[ 1.652369] usb 1-4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 1.652371] usb 1-4: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 1.652372] usb 1-4: Manufacturer: Microsoft
[ 1.658532] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.663908] usbcore: registered new interface driver usbhid
[ 1.663909] usbhid: USB HID core driver
[ 1.666252] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:045E:0047.0001/input/input3
[ 1.666311] hid-generic 0003:045E:0047.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-4/input0
[ 1.699546] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.721868] random: fast init done
[ 1.774365] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[ 1.826335] systemd[1]: systemd 242.84-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1.841079] systemd[1]: Detected architecture x86-64.
[ 1.844070] systemd[1]: Set hostname to <ArchMiscreant>.
[ 1.908223] systemd[1]: Created slice User and Session Slice.
[ 1.908334] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.908579] systemd[1]: Created slice system-getty.slice.
[ 1.908643] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.908707] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.908789] systemd[1]: Listening on udev Control Socket.
[ 1.908891] systemd[1]: Listening on Journal Audit Socket.
[ 1.916425] usb 1-10: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01
[ 1.916426] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.916427] usb 1-10: Product: USB Receiver
[ 1.916428] usb 1-10: Manufacturer: Logitech
[ 1.918463] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:046D:C52B.0002/input/input4
[ 1.923192] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 1.924961] random: lvm: uninitialized urandom read (4 bytes read)
[ 1.929344] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 1.974323] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10/input0
[ 1.975936] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52B.0003/input/input5
[ 1.975956] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52B.0003/input/input6
[ 2.030971] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52B.0003/input/input7
[ 2.031054] hid-generic 0003:046D:C52B.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10/input1
[ 2.032307] hid-generic 0003:046D:C52B.0004: hiddev1,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10/input2
[ 2.076156] audit: type=1130 audit(1567289347.626:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.081760] systemd-journald[311]: Received request to flush runtime journal from PID 1
[ 2.111157] audit: type=1130 audit(1567289347.663:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.173533] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 2.174853] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.185541] audit: type=1130 audit(1567289347.736:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.205369] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 2.205560] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.205561] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.205561] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.205562] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.205562] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.205562] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.234525] Adding 41943036k swap on /dev/sda2. Priority:-2 extents:1 across:41943036k SSFS
[ 2.241122] iTCO_vendor_support: vendor-support=0
[ 2.264965] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10/input2
[ 2.268579] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.271238] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.271252] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.271361] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 2.271458] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.277074] Linux agpgart interface v0.103
[ 2.277803] cryptd: max_cpu_qlen set to 1000
[ 2.278247] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [4c:cc:6a:92:fa:6b]
[ 2.279064] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 2.279288] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 2.279633] alx 0000:02:00.0 enp2s0: renamed from eth0
[ 2.283463] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[ 2.283661] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 2.286390] audit: type=1130 audit(1567289347.836:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.374879] AVX2 version of gcm_enc/dec engaged.
[ 2.374880] AES CTR mode by8 optimization enabled
[ 2.378615] input: Logitech Unifying Device. Wireless PID:4004 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input10
[ 2.378754] input: Logitech Unifying Device. Wireless PID:4004 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input11
[ 2.378878] input: Logitech Unifying Device. Wireless PID:4004 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input12
[ 2.378989] hid-generic 0003:046D:4004.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4004] on usb-0000:00:14.0-10/input2:1
[ 2.408021] dw-apb-uart.2: ttyS2 at MMIO 0xde22b000 (irq = 20, base_baud = 115200) is a 16550A
[ 2.454123] mousedev: PS/2 mouse device common for all mice
[ 2.459187] audit: type=1130 audit(1567289348.009:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.470940] audit: type=1127 audit(1567289348.019:7): pid=460 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 2.477470] audit: type=1130 audit(1567289348.026:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.482534] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.498555] audit: type=1130 audit(1567289348.049:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.504178] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 2.545376] 8021q: 802.1Q VLAN Support v1.8
[ 2.702951] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 2.702952] fb0: switching to inteldrmfb from EFI VGA
[ 2.702997] Console: switching to colour dummy device 80x25
[ 2.703131] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.704180] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.704180] [drm] Driver supports precise vblank timestamp query.
[ 2.704308] audit: type=1130 audit(1567289348.256:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.704879] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.706186] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[ 2.708847] intel_rapl: Found RAPL domain package
[ 2.708848] intel_rapl: Found RAPL domain core
[ 2.708849] intel_rapl: Found RAPL domain uncore
[ 2.708850] intel_rapl: Found RAPL domain dram
[ 2.709975] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.712959] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.712974] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.712975] cfg80211: failed to load regulatory.db
[ 2.722971] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0
[ 2.724706] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.724966] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 2.725129] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.730403] input: Logitech K360 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input17
[ 2.730602] logitech-hidpp-device 0003:046D:4004.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:14.0-10/input2:1
[ 2.748917] fbcon: i915drmfb (fb0) is primary device
[ 2.754600] Console: switching to colour frame buffer device 240x67
[ 2.773737] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.985374] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 2.985890] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 2.985895] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.985899] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.985902] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.985905] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 2.985908] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.985912] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 2.985916] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 2.985919] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 3.067094] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 3.067364] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 3.067593] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 3.068330] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 3.068541] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 3.068758] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 3.068925] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 3.069087] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 3.069200] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 3.069316] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 3.069440] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 3.069551] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 3.069676] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 4.387902] alx 0000:02:00.0 enp2s0: NIC Up: 1 Gbps Full
[ 4.388126] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 4.417021] urandom_read: 1 callbacks suppressed
[ 4.417022] random: dhcpcd: uninitialized urandom read (112 bytes read)
[ 5.080287] logitech-hidpp-device 0003:046D:4004.0005: HID++ 2.0 device connected.
[ 8.018269] random: crng init done
[ 10.451192] kauditd_printk_skb: 3 callbacks suppressed
[ 10.451193] audit: type=1006 audit(1567289356.003:14): pid=483 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 10.465450] audit: type=1130 audit(1567289356.016:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.470994] audit: type=1006 audit(1567289356.019:16): pid=507 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 10.500343] audit: type=1130 audit(1567289356.049:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 702.942109] audit: type=1130 audit(1567290048.493:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshdgenkeys comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 702.943010] audit: type=1130 audit(1567290048.493:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 714.813869] audit: type=1006 audit(1567290060.363:20): pid=601 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 906.961539] audit: type=1130 audit(1567290252.513:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 906.961541] audit: type=1131 audit(1567290252.513:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1807.260483] audit: type=1130 audit(1567291152.809:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6695.839053] audit: type=1006 audit(1567296041.389:24): pid=866 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[13445.700313] audit: type=1131 audit(1567302791.253:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[13445.710143] audit: type=1130 audit(1567302791.263:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sddm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[13446.647263] audit: type=1130 audit(1567302792.199:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[13446.650905] audit: type=1006 audit(1567302792.203:28): pid=1015 uid=0 old-auid=4294967295 auid=976 tty=(none) old-ses=4294967295 ses=5 res=1
[13446.670944] audit: type=1130 audit(1567302792.223:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[23572.482119] audit: type=1006 audit(1567312918.036:30): pid=657 uid=0 old-auid=4294967295 auid=1000 tty=tty2 old-ses=4294967295 ses=6 res=1
[23584.230076] audit: type=1131 audit(1567312929.779:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sddm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[23594.453022] audit: type=1131 audit(1567312940.006:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[23594.458531] audit: type=1131 audit(1567312940.009:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[23790.868215] audit: type=1130 audit(1567313136.419:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sddm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[23791.700638] audit: type=1130 audit(1567313137.253:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[23791.705299] audit: type=1006 audit(1567313137.256:36): pid=1577 uid=0 old-auid=4294967295 auid=976 tty=(none) old-ses=4294967295 ses=7 res=1
[23791.732343] audit: type=1130 audit(1567313137.283:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[24666.934814] audit: type=1130 audit(1567314012.486:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[24666.942167] audit: type=1131 audit(1567314012.493:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[24666.943781] audit: type=1130 audit(1567314012.496:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[24666.943789] audit: type=1131 audit(1567314012.496:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[24673.920448] audit: type=1130 audit(1567314019.473:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[24673.920457] audit: type=1131 audit(1567314019.473:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[25413.208595] audit: type=1131 audit(1567314758.759:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sddm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[25423.459501] audit: type=1131 audit(1567314769.009:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[25423.467720] audit: type=1131 audit(1567314769.019:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'Output of lspci -v:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
Subsystem: Micro-Star International Co., Ltd. [MSI] Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: Micro-Star International Co., Ltd. [MSI] HD Graphics 530
Flags: bus master, fast devsel, latency 0, IRQ 133
Memory at dd000000 (64-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
Subsystem: Micro-Star International Co., Ltd. [MSI] Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
Flags: fast devsel, IRQ 11
Memory at de232000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31) (prog-if 30 [XHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 122
Memory at de210000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] 100 Series/C230 Series Chipset Family Thermal Subsystem
Flags: fast devsel, IRQ 18
Memory at de231000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] 100 Series/C230 Series Chipset Family Serial IO I2C Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at de230000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #1 (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] 100 Series/C230 Series Chipset Family Serial IO I2C Controller
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at de22f000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] 100 Series/C230 Series Chipset Family MEI Controller
Flags: bus master, fast devsel, latency 0, IRQ 132
Memory at de22e000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. [MSI] Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 123
Memory at de228000 (32-bit, non-prefetchable) [size=8K]
Memory at de22d000 (32-bit, non-prefetchable) [size=256]
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f060 [size=32]
Memory at de22c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 120
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: None
Memory behind bridge: de100000-de1fffff [size=1M]
Prefetchable memory behind bridge: None
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 121
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: de000000-de0fffff [size=1M]
Prefetchable memory behind bridge: None
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1e.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO UART #0 (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] 100 Series/C230 Series Chipset Family Serial IO UART
Flags: bus master, fast devsel, latency 0, IRQ 20
Memory at de22b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:1f.0 ISA bridge: Intel Corporation Z170 Chipset LPC/eSPI Controller (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] Z170 Chipset LPC/eSPI Controller
Flags: bus master, medium devsel, latency 0
00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] 100 Series/C230 Series Chipset Family Power Management Controller
Flags: fast devsel
Memory at de224000 (32-bit, non-prefetchable) [disabled] [size=16K]
00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] 100 Series/C230 Series Chipset Family HD Audio Controller
Flags: bus master, fast devsel, latency 32, IRQ 139
Memory at de220000 (64-bit, non-prefetchable) [size=16K]
Memory at de200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] 100 Series/C230 Series Chipset Family SMBus
Flags: medium devsel, IRQ 16
Memory at de22a000 (64-bit, non-prefetchable) [size=256]
I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 USB controller: ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller (prog-if 30 [XHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] ASM1142 USB 3.1 Host Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at de100000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
02:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
Subsystem: Micro-Star International Co., Ltd. [MSI] Killer E2400 Gigabit Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at de000000 (64-bit, non-prefetchable) [size=256K]
I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
Kernel modules: alxThanks in advance for any guidance.
Last edited by tkwilson (2019-09-01 09:32:06)
Offline
#2 2019-09-01 05:31:02
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,426
- Website
Re: [SOLVED] X11 / SDDM issue - Does nothing at login screen
Please use code tags when pasting to the boards: https://wiki.archlinux.org/index.php/Co … s_and_code
That's BBCode, not HTML.
Offline
#3 2019-09-01 07:08:30
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,400
Re: [SOLVED] X11 / SDDM issue - Does nothing at login screen
Typical causes:
a) you forgot to add a $HOME dir for your user
b) permission issues w/ your $HOME
c) No /run, /var/run (latter is supposed to be a symlink to the former)
Check your system journal for more issues (sudo journalctl -b)
Offline
#4 2019-09-01 07:27:17
- tkwilson
- Member
- Registered: 2019-09-01
- Posts: 9
Re: [SOLVED] X11 / SDDM issue - Does nothing at login screen
Hi Seth, thanks for the reply. I confirm that I have a $HOME directory for the user. Permissions look good. /run and /var/run (as symlink) both exist. Lots of stuff in the journal of course, most of it pretty boring reading. Below is what is added when I started sddm: (the obvious errors at the bottom of the output "Invalid session "/var/lib/sddm/.desktop"
Sep 01 00:20:18 ArchMiscreant sudo[3752]: borg : TTY=tty2 ; PWD=/home/borg ; USER=root ; COMMAND=/usr/bin/systemctl start sddm.service
Sep 01 00:20:18 ArchMiscreant sudo[3752]: pam_unix(sudo:session): session opened for user root by borg(uid=0)
Sep 01 00:20:18 ArchMiscreant systemd[1]: Started Simple Desktop Display Manager.
Sep 01 00:20:18 ArchMiscreant audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sddm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr>
Sep 01 00:20:18 ArchMiscreant kernel: audit: type=1130 audit(1567315218.993:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sddm comm="systemd" exe="/usr/lib/syste>
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Initializing...
Sep 01 00:20:19 ArchMiscreant sudo[3752]: pam_unix(sudo:session): session closed for user root
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Starting...
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Logind interface found
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Adding new display on vt 1 ...
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Loading theme configuration from ""
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Display server starting...
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{d2da13a1-3883-4548-a547-c65a6eec4376} -background none -noreset -displayfd 1>
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Setting default cursor
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Running display setup script "/usr/share/sddm/scripts/Xsetup"
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Display server started.
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Socket server starting...
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Socket server started.
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Loading theme configuration from ""
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Greeter starting...
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Adding cookie to "/var/run/sddm/{d2da13a1-3883-4548-a547-c65a6eec4376}"
Sep 01 00:20:19 ArchMiscreant sddm-helper[3764]: [PAM] Starting...
Sep 01 00:20:19 ArchMiscreant sddm-helper[3764]: [PAM] Authenticating...
Sep 01 00:20:19 ArchMiscreant sddm-helper[3764]: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0)
Sep 01 00:20:19 ArchMiscreant sddm-helper[3764]: [PAM] returning.
Sep 01 00:20:19 ArchMiscreant systemd[1]: Created slice User Slice of UID 976.
Sep 01 00:20:19 ArchMiscreant systemd[1]: Starting User Runtime Directory /run/user/976...
Sep 01 00:20:19 ArchMiscreant systemd-logind[465]: New session c3 of user sddm.
Sep 01 00:20:19 ArchMiscreant systemd[1]: Started User Runtime Directory /run/user/976.
Sep 01 00:20:19 ArchMiscreant audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe="/usr/lib/systemd/systemd">
Sep 01 00:20:19 ArchMiscreant systemd[1]: Starting User Manager for UID 976...
Sep 01 00:20:19 ArchMiscreant kernel: audit: type=1130 audit(1567315219.783:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe>
Sep 01 00:20:19 ArchMiscreant kernel: audit: type=1006 audit(1567315219.786:49): pid=3767 uid=0 old-auid=4294967295 auid=976 tty=(none) old-ses=4294967295 ses=8 res=1
Sep 01 00:20:19 ArchMiscreant systemd[3767]: pam_unix(systemd-user:session): session opened for user sddm by (uid=0)
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Reached target Timers.
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Listening on GnuPG network certificate management daemon.
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Reached target Paths.
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Listening on p11-kit server.
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Listening on GnuPG cryptographic agent and passphrase cache.
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Starting D-Bus User Message Bus Socket.
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Listening on D-Bus User Message Bus Socket.
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Reached target Sockets.
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Reached target Basic System.
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Reached target Main User Target.
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Startup finished in 18ms.
Sep 01 00:20:19 ArchMiscreant audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? >
Sep 01 00:20:19 ArchMiscreant systemd[1]: Started User Manager for UID 976.
Sep 01 00:20:19 ArchMiscreant systemd[1]: Started Session c3 of user sddm.
Sep 01 00:20:19 ArchMiscreant kernel: audit: type=1130 audit(1567315219.809:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@976 comm="systemd" exe="/usr/lib/s>
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Greeter session started successfully
Sep 01 00:20:19 ArchMiscreant sddm-greeter[3773]: High-DPI autoscaling not Enabled
Sep 01 00:20:19 ArchMiscreant sddm-greeter[3773]: Loading theme configuration from "qrc:/theme/theme.conf"
Sep 01 00:20:19 ArchMiscreant systemd[3767]: Started D-Bus User Message Bus.
Sep 01 00:20:19 ArchMiscreant sddm-greeter[3773]: Connected to the daemon.
Sep 01 00:20:19 ArchMiscreant sddm[3755]: Message received from greeter: Connect
Sep 01 00:20:19 ArchMiscreant sddm-greeter[3773]: Loading qrc:/theme/Main.qml...
Sep 01 00:20:19 ArchMiscreant sddm-greeter[3773]: file:///usr/lib/qt/qml/SddmComponents/ComboBox.qml:58: TypeError: Cannot read property 'name' of undefined
Sep 01 00:20:19 ArchMiscreant sddm-greeter[3773]: Adding view for "HDMI-1" QRect(0,0 1920x1080)
Sep 01 00:20:19 ArchMiscreant sddm-greeter[3773]: Message received from daemon: Capabilities
Sep 01 00:20:19 ArchMiscreant sddm-greeter[3773]: Message received from daemon: HostName
Sep 01 00:20:23 ArchMiscreant sddm-greeter[3773]: Reading from "/var/lib/sddm/.desktop"
Sep 01 00:20:23 ArchMiscreant sddm[3755]: Message received from greeter: Login
Sep 01 00:20:23 ArchMiscreant sddm[3755]: Reading from "/var/lib/sddm/.desktop"
Sep 01 00:20:23 ArchMiscreant sddm[3755]: Invalid session "/var/lib/sddm/.desktop"
Sep 01 00:20:24 ArchMiscreant sddm-greeter[3773]: Reading from "/var/lib/sddm/.desktop"
Sep 01 00:20:24 ArchMiscreant sddm[3755]: Message received from greeter: Login
Sep 01 00:20:24 ArchMiscreant sddm[3755]: Reading from "/var/lib/sddm/.desktop"
Sep 01 00:20:24 ArchMiscreant sddm[3755]: Invalid session "/var/lib/sddm/.desktop"Offline
#5 2019-09-01 09:00:08
- arojas
- Developer
- From: Spain
- Registered: 2011-10-09
- Posts: 2,311
Re: [SOLVED] X11 / SDDM issue - Does nothing at login screen
Have you actually installed anything to log into? Any desktop environment or window manager?
Offline
#6 2019-09-01 09:18:04
- tkwilson
- Member
- Registered: 2019-09-01
- Posts: 9
Re: [SOLVED] X11 / SDDM issue - Does nothing at login screen
That's an interesting question, and one I am not 100% sure of the answer to. I have Xorg installed (the x-server, right?), I have SDDM installed, and I intend to install KDE/Plasma. However, the very first line under "installation" in the KDE wiki is, "Before installing Plasma, make sure you have a working Xorg installation on your system."
So, that is where I am. I have NOT installed KDE or any other DE. Is that my problem? (Told you I'm a noob...)
Let me try that,
Thanks!
Offline
#7 2019-09-01 09:26:29
- arojas
- Developer
- From: Spain
- Registered: 2011-10-09
- Posts: 2,311
Re: [SOLVED] X11 / SDDM issue - Does nothing at login screen
The fact that SDDM starts up already shows that you have a working Xorg installation on your system.
Offline
#8 2019-09-01 09:30:50
- tkwilson
- Member
- Registered: 2019-09-01
- Posts: 9
Re: [SOLVED] X11 / SDDM issue - Does nothing at login screen
Well, don't I feel like an idiot? The answer: Yes I do.
Thank you arojas, that was the very simply answer to my problem This issue is solved. /smh
Thanks again!
Cheers
Offline