You are not logged in.

#1 2019-09-13 18:17:18

mrgatos
Member
Registered: 2019-09-13
Posts: 6

Arch Linux KDE Window choppiness and lag after installation

Hey guys. I have just finished installing Arch and KDE on top of it today but it seems like something is wrong with my Intel Graphics. Windows are moving a bit choppy and i feel an overall lag. I have installed xorg stuff and xf86-video-intel and xf86-video-mesa drivers. I'm 90% sure that i may have done something wrong but i dont know how to fix it.

Offline

#2 2019-09-13 18:33:02

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: Arch Linux KDE Window choppiness and lag after installation

Not an Installation issue, moving to NC...


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2019-09-13 18:37:30

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Arch Linux KDE Window choppiness and lag after installation

How is KDE started?  If it is starting X and not Wayland what is the contents of Xorg.log?
What is the GPU?

lspci | grep -e VGA -e 3D

Where did you obtain xf86-video-mesa from?

Last edited by loqs (2019-09-13 18:37:50)

Offline

#4 2019-09-13 19:04:15

mrgatos
Member
Registered: 2019-09-13
Posts: 6

Re: Arch Linux KDE Window choppiness and lag after installation

I obtained video-mesa with pacman. I think it was xf86-video-mesa.

This is my GPU : 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)

How do i check the contents of xorg.log?

Last edited by mrgatos (2019-09-13 19:05:32)

Offline

#5 2019-09-13 19:06:19

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: Arch Linux KDE Window choppiness and lag after installation

mrgatos wrote:

How do i check the contents of xorg.log?

Like everything in Arch, you read the wiki first: https://wiki.archlinux.org/index.php/Xorg#General


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#6 2019-09-13 19:08:14

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Arch Linux KDE Window choppiness and lag after installation

mrgatos wrote:

I obtained video-mesa with pacman. I think it was xf86-video-mesa.

# pacman -S xf86-video-mesa
error: target not found: xf86-video-mesa

Perhaps you meant some other package you can check the pacman.log /var/log/pacman.log

mrgatos wrote:

How do i check the contents of xorg.log?

Xorg#General documents the locations for Xorg.n.log.
You did not say what command or service is starting KDE.

Offline

#7 2019-09-13 19:22:04

mrgatos
Member
Registered: 2019-09-13
Posts: 6

Re: Arch Linux KDE Window choppiness and lag after installation

Here is the log :

[     6.940] (--) Log file renamed from "/var/log/Xorg.pid-379.log" to "/var/log/Xorg.0.log"
[     6.941] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[     6.941] Build Operating System: Linux Arch Linux
[     6.941] Current Operating System: Linux alex 4.19.72-1-lts #1 SMP Tue Sep 10 16:48:44 CEST 2019 x86_64
[     6.941] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=83c71079-6a03-4725-b04f-e71a133dfb19 rw
[     6.941] Build Date: 30 June 2019  09:52:01AM
[     6.941]  
[     6.941] Current version of pixman: 0.38.4
[     6.941] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[     6.941] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.941] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 13 22:00:42 2019
[     6.942] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.943] (==) No Layout section.  Using the first Screen section.
[     6.943] (==) No screen section available. Using defaults.
[     6.943] (**) |-->Screen "Default Screen Section" (0)
[     6.943] (**) |   |-->Monitor "<default monitor>"
[     6.943] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     6.943] (==) Automatically adding devices
[     6.943] (==) Automatically enabling devices
[     6.943] (==) Automatically adding GPU devices
[     6.943] (==) Automatically binding GPU devices
[     6.943] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.944] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[     6.944] 	Entry deleted from font path.
[     6.944] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[     6.944] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     6.944] 	Entry deleted from font path.
[     6.944] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     6.944] 	Entry deleted from font path.
[     6.945] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[     6.945] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.945] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.945] (II) Module ABI versions:
[     6.945] 	X.Org ANSI C Emulation: 0.4
[     6.945] 	X.Org Video Driver: 24.0
[     6.945] 	X.Org XInput driver : 24.1
[     6.945] 	X.Org Server Extension : 10.0
[     6.945] (++) using VT number 1

[     6.946] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.946] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.957] (--) PCI:*(0@0:2:0) 8086:0a2e:17aa:39ff rev 9, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     6.957] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     6.957] (II) LoadModule: "glx"
[     6.958] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.966] (II) Module glx: vendor="X.Org Foundation"
[     6.966] 	compiled for 1.20.5, module version = 1.0.0
[     6.966] 	ABI class: X.Org Server Extension, version 10.0
[     6.966] (==) Matched intel as autoconfigured driver 0
[     6.966] (==) Matched modesetting as autoconfigured driver 1
[     6.966] (==) Matched fbdev as autoconfigured driver 2
[     6.966] (==) Matched vesa as autoconfigured driver 3
[     6.966] (==) Assigned the driver to the xf86ConfigLayout
[     6.966] (II) LoadModule: "intel"
[     6.966] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     6.969] (II) Module intel: vendor="X.Org Foundation"
[     6.969] 	compiled for 1.20.5, module version = 2.99.917
[     6.969] 	Module class: X.Org Video Driver
[     6.969] 	ABI class: X.Org Video Driver, version 24.0
[     6.969] (II) LoadModule: "modesetting"
[     6.969] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.970] (II) Module modesetting: vendor="X.Org Foundation"
[     6.970] 	compiled for 1.20.5, module version = 1.20.5
[     6.970] 	Module class: X.Org Video Driver
[     6.970] 	ABI class: X.Org Video Driver, version 24.0
[     6.970] (II) LoadModule: "fbdev"
[     6.970] (WW) Warning, couldn't open module fbdev
[     6.970] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     6.970] (II) LoadModule: "vesa"
[     6.971] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     6.971] (II) Module vesa: vendor="X.Org Foundation"
[     6.971] 	compiled for 1.20.0, module version = 2.4.0
[     6.971] 	Module class: X.Org Video Driver
[     6.971] 	ABI class: X.Org Video Driver, version 24.0
[     6.971] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     6.971] (II) intel: Driver for Intel(R) HD Graphics
[     6.971] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     6.971] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     6.971] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     6.971] (II) VESA: driver for VESA chipsets: vesa
[     6.972] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180719
[     6.972] (II) intel(0): SNA compiled from 2.99.917-870-g6f4972d5
[     6.998] (WW) Falling back to old probe method for modesetting
[     6.998] (--) intel(0): Integrated Graphics Chipset: Intel(R) Iris(TM) Graphics 5100
[     6.998] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[     6.998] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     6.998] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     6.998] (==) intel(0): RGB weight 888
[     6.998] (==) intel(0): Default visual is TrueColor
[     6.999] (II) intel(0): Output eDP1 has no monitor section
[     6.999] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     6.999] (II) intel(0): Enabled output eDP1
[     6.999] (II) intel(0): Output HDMI1 has no monitor section
[     6.999] (II) intel(0): Enabled output HDMI1
[     6.999] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     6.999] (II) intel(0): Output VIRTUAL1 has no monitor section
[     6.999] (II) intel(0): Enabled output VIRTUAL1
[     6.999] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[     6.999] (==) intel(0): TearFree disabled
[     6.999] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.999] (==) intel(0): DPI set to (96, 96)
[     6.999] (II) Loading sub module "dri3"
[     6.999] (II) LoadModule: "dri3"
[     6.999] (II) Module "dri3" already built-in
[     6.999] (II) Loading sub module "dri2"
[     6.999] (II) LoadModule: "dri2"
[     6.999] (II) Module "dri2" already built-in
[     6.999] (II) Loading sub module "present"
[     6.999] (II) LoadModule: "present"
[     6.999] (II) Module "present" already built-in
[     6.999] (II) UnloadModule: "modesetting"
[     6.999] (II) Unloading modesetting
[     6.999] (II) UnloadModule: "vesa"
[     6.999] (II) Unloading vesa
[     7.002] (II) intel(0): SNA initialized with Haswell (gen7.5, gt3) backend
[     7.002] (==) intel(0): Backing store enabled
[     7.002] (==) intel(0): Silken mouse disabled
[     7.002] (II) intel(0): HW Cursor enabled
[     7.002] (==) intel(0): DPMS enabled
[     7.003] (==) intel(0): Display hotplug detection enabled
[     7.003] (II) intel(0): [DRI2] Setup complete
[     7.003] (II) intel(0): [DRI2]   DRI driver: i965
[     7.003] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     7.003] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     7.003] (II) intel(0): hardware support for Present enabled
[     7.003] (II) Initializing extension Generic Event Extension
[     7.003] (II) Initializing extension SHAPE
[     7.003] (II) Initializing extension MIT-SHM
[     7.003] (II) Initializing extension XInputExtension
[     7.003] (II) Initializing extension XTEST
[     7.003] (II) Initializing extension BIG-REQUESTS
[     7.004] (II) Initializing extension SYNC
[     7.004] (II) Initializing extension XKEYBOARD
[     7.004] (II) Initializing extension XC-MISC
[     7.004] (II) Initializing extension SECURITY
[     7.004] (II) Initializing extension XFIXES
[     7.004] (II) Initializing extension RENDER
[     7.004] (II) Initializing extension RANDR
[     7.004] (II) Initializing extension COMPOSITE
[     7.004] (II) Initializing extension DAMAGE
[     7.004] (II) Initializing extension MIT-SCREEN-SAVER
[     7.005] (II) Initializing extension DOUBLE-BUFFER
[     7.005] (II) Initializing extension RECORD
[     7.005] (II) Initializing extension DPMS
[     7.005] (II) Initializing extension Present
[     7.005] (II) Initializing extension DRI3
[     7.005] (II) Initializing extension X-Resource
[     7.005] (II) Initializing extension XVideo
[     7.005] (II) Initializing extension XVideo-MotionCompensation
[     7.005] (II) Initializing extension GLX
[     7.029] (II) AIGLX: Loaded and initialized i965
[     7.029] (II) GLX: Initialized DRI2 GL provider for screen 0
[     7.029] (II) Initializing extension XFree86-VidModeExtension
[     7.029] (II) Initializing extension XFree86-DGA
[     7.029] (II) Initializing extension XFree86-DRI
[     7.029] (II) Initializing extension DRI2
[     7.031] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     7.039] (II) intel(0): Setting screen physical size to 361 x 203
[     7.107] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     7.107] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     7.107] (II) LoadModule: "libinput"
[     7.107] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     7.110] (II) Module libinput: vendor="X.Org Foundation"
[     7.110] 	compiled for 1.20.5, module version = 0.29.0
[     7.110] 	Module class: X.Org XInput Driver
[     7.110] 	ABI class: X.Org XInput driver, version 24.1
[     7.110] (II) Using input driver 'libinput' for 'Power Button'
[     7.110] (**) Power Button: always reports core events
[     7.110] (**) Option "Device" "/dev/input/event2"
[     7.110] (**) Option "_source" "server/udev"
[     7.113] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     7.113] (II) event2  - Power Button: device is a keyboard
[     7.113] (II) event2  - Power Button: device removed
[     7.167] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     7.167] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.169] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     7.169] (II) event2  - Power Button: device is a keyboard
[     7.169] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[     7.169] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     7.169] (II) Using input driver 'libinput' for 'Video Bus'
[     7.169] (**) Video Bus: always reports core events
[     7.169] (**) Option "Device" "/dev/input/event14"
[     7.169] (**) Option "_source" "server/udev"
[     7.170] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[     7.170] (II) event14 - Video Bus: device is a keyboard
[     7.170] (II) event14 - Video Bus: device removed
[     7.277] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event14"
[     7.277] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     7.279] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[     7.279] (II) event14 - Video Bus: device is a keyboard
[     7.280] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     7.280] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     7.280] (II) Using input driver 'libinput' for 'Power Button'
[     7.280] (**) Power Button: always reports core events
[     7.280] (**) Option "Device" "/dev/input/event1"
[     7.280] (**) Option "_source" "server/udev"
[     7.281] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     7.281] (II) event1  - Power Button: device is a keyboard
[     7.281] (II) event1  - Power Button: device removed
[     7.317] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     7.317] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     7.319] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     7.319] (II) event1  - Power Button: device is a keyboard
[     7.320] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     7.320] (II) No input driver specified, ignoring this device.
[     7.320] (II) This device may have been added with another device file.
[     7.320] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event16)
[     7.320] (II) No input driver specified, ignoring this device.
[     7.320] (II) This device may have been added with another device file.
[     7.321] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event17)
[     7.321] (II) No input driver specified, ignoring this device.
[     7.321] (II) This device may have been added with another device file.
[     7.321] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event18)
[     7.322] (II) No input driver specified, ignoring this device.
[     7.322] (II) This device may have been added with another device file.
[     7.322] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event19)
[     7.322] (II) No input driver specified, ignoring this device.
[     7.322] (II) This device may have been added with another device file.
[     7.323] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event20)
[     7.323] (II) No input driver specified, ignoring this device.
[     7.323] (II) This device may have been added with another device file.
[     7.324] (II) config/udev: Adding input device MOSART Semi. 2.4G INPUT DEVICE (/dev/input/event4)
[     7.324] (**) MOSART Semi. 2.4G INPUT DEVICE: Applying InputClass "libinput keyboard catchall"
[     7.324] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G INPUT DEVICE'
[     7.324] (**) MOSART Semi. 2.4G INPUT DEVICE: always reports core events
[     7.324] (**) Option "Device" "/dev/input/event4"
[     7.324] (**) Option "_source" "server/udev"
[     7.326] (II) event4  - MOSART Semi. 2.4G INPUT DEVICE: is tagged by udev as: Keyboard
[     7.326] (II) event4  - MOSART Semi. 2.4G INPUT DEVICE: device is a keyboard
[     7.326] (II) event4  - MOSART Semi. 2.4G INPUT DEVICE: device removed
[     7.357] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:062A:415E.0001/input/input5/event4"
[     7.357] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G INPUT DEVICE" (type: KEYBOARD, id 9)
[     7.360] (II) event4  - MOSART Semi. 2.4G INPUT DEVICE: is tagged by udev as: Keyboard
[     7.360] (II) event4  - MOSART Semi. 2.4G INPUT DEVICE: device is a keyboard
[     7.361] (II) config/udev: Adding input device MOSART Semi. 2.4G INPUT DEVICE Mouse (/dev/input/event5)
[     7.361] (**) MOSART Semi. 2.4G INPUT DEVICE Mouse: Applying InputClass "libinput pointer catchall"
[     7.361] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G INPUT DEVICE Mouse'
[     7.361] (**) MOSART Semi. 2.4G INPUT DEVICE Mouse: always reports core events
[     7.361] (**) Option "Device" "/dev/input/event5"
[     7.361] (**) Option "_source" "server/udev"
[     7.363] (II) event5  - MOSART Semi. 2.4G INPUT DEVICE Mouse: is tagged by udev as: Mouse
[     7.363] (II) event5  - MOSART Semi. 2.4G INPUT DEVICE Mouse: device is a pointer
[     7.363] (II) event5  - MOSART Semi. 2.4G INPUT DEVICE Mouse: device removed
[     7.437] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:062A:415E.0002/input/input6/event5"
[     7.437] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G INPUT DEVICE Mouse" (type: MOUSE, id 10)
[     7.438] (**) Option "AccelerationScheme" "none"
[     7.438] (**) MOSART Semi. 2.4G INPUT DEVICE Mouse: (accel) selected scheme none/0
[     7.438] (**) MOSART Semi. 2.4G INPUT DEVICE Mouse: (accel) acceleration factor: 2.000
[     7.438] (**) MOSART Semi. 2.4G INPUT DEVICE Mouse: (accel) acceleration threshold: 4
[     7.440] (II) event5  - MOSART Semi. 2.4G INPUT DEVICE Mouse: is tagged by udev as: Mouse
[     7.440] (II) event5  - MOSART Semi. 2.4G INPUT DEVICE Mouse: device is a pointer
[     7.441] (II) config/udev: Adding input device MOSART Semi. 2.4G INPUT DEVICE Mouse (/dev/input/mouse0)
[     7.441] (II) No input driver specified, ignoring this device.
[     7.441] (II) This device may have been added with another device file.
[     7.442] (II) config/udev: Adding input device MOSART Semi. 2.4G INPUT DEVICE Consumer Control (/dev/input/event6)
[     7.442] (**) MOSART Semi. 2.4G INPUT DEVICE Consumer Control: Applying InputClass "libinput keyboard catchall"
[     7.442] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G INPUT DEVICE Consumer Control'
[     7.442] (**) MOSART Semi. 2.4G INPUT DEVICE Consumer Control: always reports core events
[     7.442] (**) Option "Device" "/dev/input/event6"
[     7.442] (**) Option "_source" "server/udev"
[     7.444] (II) event6  - MOSART Semi. 2.4G INPUT DEVICE Consumer Control: is tagged by udev as: Keyboard
[     7.444] (II) event6  - MOSART Semi. 2.4G INPUT DEVICE Consumer Control: device is a keyboard
[     7.444] (II) event6  - MOSART Semi. 2.4G INPUT DEVICE Consumer Control: device removed
[     7.477] (II) libinput: MOSART Semi. 2.4G INPUT DEVICE Consumer Control: needs a virtual subdevice
[     7.477] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:062A:415E.0002/input/input7/event6"
[     7.477] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G INPUT DEVICE Consumer Control" (type: MOUSE, id 11)
[     7.478] (**) Option "AccelerationScheme" "none"
[     7.478] (**) MOSART Semi. 2.4G INPUT DEVICE Consumer Control: (accel) selected scheme none/0
[     7.478] (**) MOSART Semi. 2.4G INPUT DEVICE Consumer Control: (accel) acceleration factor: 2.000
[     7.478] (**) MOSART Semi. 2.4G INPUT DEVICE Consumer Control: (accel) acceleration threshold: 4
[     7.480] (II) event6  - MOSART Semi. 2.4G INPUT DEVICE Consumer Control: is tagged by udev as: Keyboard
[     7.480] (II) event6  - MOSART Semi. 2.4G INPUT DEVICE Consumer Control: device is a keyboard
[     7.481] (II) config/udev: Adding input device MOSART Semi. 2.4G INPUT DEVICE System Control (/dev/input/event7)
[     7.481] (**) MOSART Semi. 2.4G INPUT DEVICE System Control: Applying InputClass "libinput keyboard catchall"
[     7.481] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G INPUT DEVICE System Control'
[     7.481] (**) MOSART Semi. 2.4G INPUT DEVICE System Control: always reports core events
[     7.481] (**) Option "Device" "/dev/input/event7"
[     7.481] (**) Option "_source" "server/udev"
[     7.483] (II) event7  - MOSART Semi. 2.4G INPUT DEVICE System Control: is tagged by udev as: Keyboard
[     7.483] (II) event7  - MOSART Semi. 2.4G INPUT DEVICE System Control: device is a keyboard
[     7.483] (II) event7  - MOSART Semi. 2.4G INPUT DEVICE System Control: device removed
[     7.517] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:062A:415E.0002/input/input8/event7"
[     7.517] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G INPUT DEVICE System Control" (type: KEYBOARD, id 12)
[     7.519] (II) event7  - MOSART Semi. 2.4G INPUT DEVICE System Control: is tagged by udev as: Keyboard
[     7.519] (II) event7  - MOSART Semi. 2.4G INPUT DEVICE System Control: device is a keyboard
[     7.520] (II) config/udev: Adding input device MOSART Semi. 2.4G INPUT DEVICE (/dev/input/event8)
[     7.520] (II) No input driver specified, ignoring this device.
[     7.520] (II) This device may have been added with another device file.
[     7.521] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event13)
[     7.521] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "libinput keyboard catchall"
[     7.521] (II) Using input driver 'libinput' for 'Lenovo EasyCamera: Lenovo EasyC'
[     7.521] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[     7.521] (**) Option "Device" "/dev/input/event13"
[     7.521] (**) Option "_source" "server/udev"
[     7.522] (II) event13 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[     7.523] (II) event13 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[     7.523] (II) event13 - Lenovo EasyCamera: Lenovo EasyC: device removed
[     7.597] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input15/event13"
[     7.597] (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 13)
[     7.599] (II) event13 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[     7.599] (II) event13 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[     7.600] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[     7.600] (II) No input driver specified, ignoring this device.
[     7.600] (II) This device may have been added with another device file.
[     7.601] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[     7.601] (II) No input driver specified, ignoring this device.
[     7.601] (II) This device may have been added with another device file.
[     7.601] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event10)
[     7.601] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[     7.601] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[     7.601] (**) Ideapad extra buttons: always reports core events
[     7.601] (**) Option "Device" "/dev/input/event10"
[     7.601] (**) Option "_source" "server/udev"
[     7.603] (II) event10 - Ideapad extra buttons: is tagged by udev as: Keyboard
[     7.603] (II) event10 - Ideapad extra buttons: device is a keyboard
[     7.603] (II) event10 - Ideapad extra buttons: device removed
[     7.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input11/event10"
[     7.677] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 14)
[     7.679] (II) event10 - Ideapad extra buttons: is tagged by udev as: Keyboard
[     7.679] (II) event10 - Ideapad extra buttons: device is a keyboard
[     7.680] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     7.680] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     7.680] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     7.680] (**) AT Translated Set 2 keyboard: always reports core events
[     7.680] (**) Option "Device" "/dev/input/event3"
[     7.680] (**) Option "_source" "server/udev"
[     7.681] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     7.682] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     7.683] (II) event3  - AT Translated Set 2 keyboard: device removed
[     7.737] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     7.737] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[     7.739] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     7.739] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     7.741] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event15)
[     7.741] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[     7.741] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     7.741] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[     7.741] (II) LoadModule: "synaptics"
[     7.741] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     7.743] (II) Module synaptics: vendor="X.Org Foundation"
[     7.743] 	compiled for 1.20.0, module version = 1.9.1
[     7.743] 	Module class: X.Org XInput Driver
[     7.743] 	ABI class: X.Org XInput driver, version 24.1
[     7.743] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[     7.743] (**) ETPS/2 Elantech Touchpad: always reports core events
[     7.743] (**) Option "Device" "/dev/input/event15"
[     7.837] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2516 (res 32)
[     7.837] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1184 (res 33)
[     7.837] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[     7.837] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[     7.837] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[     7.837] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[     7.838] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     7.838] (**) ETPS/2 Elantech Touchpad: always reports core events
[     7.917] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event15"
[     7.917] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 16)
[     7.917] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[     7.917] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[     7.917] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.072
[     7.918] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[     7.918] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[     7.918] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[     7.918] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[     7.918] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     7.918] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[     7.918] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     7.919] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[     7.919] (II) No input driver specified, ignoring this device.
[     7.919] (II) This device may have been added with another device file.
[     7.940] (**) MOSART Semi. 2.4G INPUT DEVICE Consumer Control: Applying InputClass "libinput keyboard catchall"
[     7.940] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G INPUT DEVICE Consumer Control'
[     7.940] (**) MOSART Semi. 2.4G INPUT DEVICE Consumer Control: always reports core events
[     7.940] (**) Option "Device" "/dev/input/event6"
[     7.940] (**) Option "_source" "_driver/libinput"
[     7.940] (II) libinput: MOSART Semi. 2.4G INPUT DEVICE Consumer Control: is a virtual subdevice
[     7.940] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:062A:415E.0002/input/input7/event6"
[     7.940] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G INPUT DEVICE Consumer Control" (type: KEYBOARD, id 17)
[     7.943] (EE) Failed to open authorization file "/var/run/sddm/{2d1834d6-77dd-49c7-b97b-0604567ac9d1}": No such file or directory
[     8.686] (II) intel(0): EDID vendor "BOE", prod id 1565
[     8.686] (II) intel(0): Printing DDC gathered Modelines:
[     8.686] (II) intel(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 777 790 +hsync -vsync (47.4 kHz eP)

Last edited by mrgatos (2019-09-13 19:24:13)

Offline

#8 2019-09-13 19:23:18

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: Arch Linux KDE Window choppiness and lag after installation

Use code, not quote, tags when pasting to the boards: https://wiki.archlinux.org/index.php/Co … s_and_code


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#9 2019-09-13 19:24:30

mrgatos
Member
Registered: 2019-09-13
Posts: 6

Re: Arch Linux KDE Window choppiness and lag after installation

Done. Sorry for the hussle, kinda new with this stuff

Offline

#10 2019-09-13 19:26:14

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Arch Linux KDE Window choppiness and lag after installation

[     7.943] (EE) Failed to open authorization file "/var/run/sddm/{2d1834d6-77dd-49c7-b97b-0604567ac9d1}": No such file or directory

Did you install and enable SDDM?

Offline

#11 2019-09-13 19:27:41

mrgatos
Member
Registered: 2019-09-13
Posts: 6

Re: Arch Linux KDE Window choppiness and lag after installation

loqs wrote:
[     7.943] (EE) Failed to open authorization file "/var/run/sddm/{2d1834d6-77dd-49c7-b97b-0604567ac9d1}": No such file or directory

Did you install and enable SDDM?


yeah everything is working fine except the lag

Last edited by mrgatos (2019-09-13 19:28:08)

Offline

#12 2019-09-13 19:33:12

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Arch Linux KDE Window choppiness and lag after installation

If you remove xf86-video-intel so X uses the modesetting driver is there any improvement?  Note this requires a restart of X server.

Offline

#13 2019-09-13 19:42:31

mrgatos
Member
Registered: 2019-09-13
Posts: 6

Re: Arch Linux KDE Window choppiness and lag after installation

loqs wrote:

If you remove xf86-video-intel so X uses the modesetting driver is there any improvement?  Note this requires a restart of X server.


You are a god.Problem solved tyvm!

Offline

Board footer

Powered by FluxBB