You are not logged in.

#1 2019-09-11 13:17:52

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 813
Website

[SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

I switched to startx to start my desktop in userland.

It works, kinda. There is a login prompt on tty1: I can type my username, and press enter, then my password, and press enter, and login works (from which startx is autostarted via ~/.bash_profile, etc.); however the screen is blank (until x starts, x is fine*).

Backlight on, black, blank; no tty shown on any ctrl+alt+{0~9}, but they do seem to be there, or at least one does on tty1.

Any ideas on how to make this visible? I use proprietary nvidia drivers.

kernel parameters:

options [snip, hard disk stuff] add_efi_memmap rw quiet loglevel=3 rd.systemd.show_status=auto rd.udev.log_priority=3 vga=current nvidia-drm.modeset=1 vt.global_cursor_default=0 fsck.repair=preen

mkinitcpio.conf:

MODULES=(raid0 ext4 nvidia nvidia_modeset nvidia_uvm nvidia_drm)
HOOKS=(base udev resume autodetect modconf block mdadm_udev fsck filesystems keyboard keymap)

EDIT: /etc/modprobe.d/nvidia.conf

options nvidia NVreg_UsePageAttributeTable=1 NVreg_InitializeSystemMemoryAllocations=0 NVreg_EnableMSI=1 NVreg_RegisterForACPIEvents=1

Anything else you want to see, just ask.

*On second thought, x is not entirely "fine"; it takes longer to load the desktop (gnome-session) from startx than lightdm and there are two cursor issues: the cursor is invisible until a window opens; after which it appears to use two themes in different places. The start-up delay can probably be tweaked out with better configuration; not sure if the cursor issues are related or not. The two themes thing I think I've fixed before; somehow gtk tries to use two cursor themes (a default and a configured theme, with the configured having the less authoritative configuration location) at once; don't remember how I worked around that before, but it involved suid x**

**EDIT: Inconsistent cursor theme issue resolved by setting XCURSOR_THEME and XCURSOR_SIZE in ~/.xinitrc; invisibility (unresolved) is probably a variant of this bug, which makes me suspect it is a permissions issue between gnome-settings-daemon, the kernel, and x11.

Last edited by quequotion (2019-09-23 08:22:48)

Offline

#2 2019-09-11 13:25:15

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,422

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

Enabled modeset should be all that's necessary, did you double check with e.g.

systool -vm nvidia-drm

that the param is indeed set

Offline

#3 2019-09-11 13:29:36

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 813
Website

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

V1del wrote:
systool -vm nvidia-drm
Error opening module nvidia-drm

That doesn't bode well.

Offline

#4 2019-09-11 13:47:00

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,422

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

I might also just be an idiot and systool the one tool to query module related information without transparently converting hyphens and underscores

systool -vm nvidia_drm

Offline

#5 2019-09-11 14:06:40

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 813
Website

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

V1del wrote:
systool -vm nvidia_drm
Module = "nvidia_drm"

  Attributes:
    coresize            = "53248"
    initsize            = "0"
    initstate           = "live"
    refcnt              = "3"
    srcversion          = "E6247EA065A5FD588E9BA91"
    taint               = "POE"
    uevent              = <store method only>
    version             = "435.21"

  Parameters:

  Sections:

Offline

#6 2019-09-11 15:11:47

seth
Member
Registered: 2012-09-03
Posts: 49,969

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

Do you get output on a text console?
https://wiki.archlinux.org/index.php/GR … ramebuffer (in case you're using grub)

Online

#7 2019-09-11 17:05:48

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 813
Website

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

seth wrote:

Do you get output on a text console?

Some, yes. I don't use grub, but systemd-boot. I get its menu, then the output of fsck, then darkness.

Last edited by quequotion (2019-09-13 10:22:17)

Offline

#8 2019-09-11 22:10:10

seth
Member
Registered: 2012-09-03
Posts: 49,969

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

You could also try to enforce a VESA mode (eg. 1024x768), https://raw.githubusercontent.com/torva … modedb.rst

Online

#9 2019-09-13 10:31:51

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 813
Website

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

seth wrote:

You could also try to enforce a VESA mode

I tried adding video=1920x1080MR@60D to kernel options:

options [snip, hard disk stuff] add_efi_memmap rw quiet loglevel=3 rd.systemd.show_status=auto rd.udev.log_priority=3 vga=current nvidia-drm.modeset=1 video=1920x1080MR@60D vt.global_cursor_default=0 fsck.repair=preen

Unfortunately, no change.

I have tried to use video= in the past, unrelated to the present issue, and could never determine if setting this option has any effect other than occasionally causing the display to fail to activate. On the other hand, this is the first time I recall seeing an authoritative and comprehensive description of its syntax.

Offline

#10 2019-09-13 10:42:14

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,422

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

FWIW: https://bbs.archlinux.org/viewtopic.php … 3#p1850293

Though I'm unsure how that should relate if you are already including it in the initramfs anyway.

Offline

#11 2019-09-13 11:38:38

seth
Member
Registered: 2012-09-03
Posts: 49,969

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

1920x1080 is not a vesa standard, really try "1024x768M@60D" and also specify the output (eg. from the xrandr identifier)

Online

#12 2019-09-13 13:02:09

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 813
Website

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

seth wrote:

really try "1024x768M@60D" and also specify the output (eg. from the xrandr identifier)

So I tried DVI-D-0:1024x768M@60D, but to no avail.

speaking of xrandr output:

DVI-D-0 connected 1920x1080+0+0 (0x27f) normal (normal left inverted right x axis y axis) 509mm x 286mm
	Identifier: 0x27e
	Timestamp:  418920
	Subpixel:   unknown
	Gamma:      1.0:1.0:1.0
	Brightness: 1.0
	Clones:    
	CRTC:       1
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	CscMatrix: 65536 0 0 0 0 65536 0 0 0 0 65536 0 
	EDID: 
		00ffffffffffff0034ac864801010101
		1b16010380331d78eadd45a3554fa027
		125054bfef80714f8180814fa9c0b300
		010101010101023a801871382d40582c
		4500fd1e1100001e000000fd00384b1f
		5210000a202020202020000000fc0052
		4454323334574c4d0a202020000000ff
		003237323035343835414a0a20200010
	BorderDimensions: 4 
		supported: 4
	Border: 0 0 0 0 
		range: (0, 65535)
	SignalFormat: TMDS 
		supported: TMDS
	ConnectorType: DVI-D 
	ConnectorNumber: 0 
	_ConnectorLocation: 0 
	non-desktop: 0 
		supported: 0, 1
  1920x1080 (0x27f) 148.500MHz +HSync +VSync *current +preferred
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  67.50KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  60.00Hz
  1680x1050 (0x280) 146.250MHz -HSync +VSync
        h: width  1680 start 1784 end 1960 total 2240 skew    0 clock  65.29KHz
        v: height 1050 start 1053 end 1059 total 1089           clock  59.95Hz
  1600x900 (0x281) 108.000MHz +HSync +VSync
        h: width  1600 start 1624 end 1704 total 1800 skew    0 clock  60.00KHz
        v: height  900 start  901 end  904 total 1000           clock  60.00Hz
  1280x1024 (0x282) 135.000MHz +HSync +VSync
        h: width  1280 start 1296 end 1440 total 1688 skew    0 clock  79.98KHz
        v: height 1024 start 1025 end 1028 total 1066           clock  75.02Hz
  1280x1024 (0x283) 108.000MHz +HSync +VSync
        h: width  1280 start 1328 end 1440 total 1688 skew    0 clock  63.98KHz
        v: height 1024 start 1025 end 1028 total 1066           clock  60.02Hz
  1280x960 (0x284) 129.860MHz -HSync +VSync
        h: width  1280 start 1368 end 1504 total 1728 skew    0 clock  75.15KHz
        v: height  960 start  961 end  964 total 1002           clock  75.00Hz
  1152x864 (0x285) 108.000MHz +HSync +VSync
        h: width  1152 start 1216 end 1344 total 1600 skew    0 clock  67.50KHz
        v: height  864 start  865 end  868 total  900           clock  75.00Hz
  1024x768 (0x286) 78.750MHz +HSync +VSync
        h: width  1024 start 1040 end 1136 total 1312 skew    0 clock  60.02KHz
        v: height  768 start  769 end  772 total  800           clock  75.03Hz
  1024x768 (0x287) 75.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1328 skew    0 clock  56.48KHz
        v: height  768 start  771 end  777 total  806           clock  70.07Hz
  1024x768 (0x288) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  800x600 (0x289) 49.500MHz +HSync +VSync
        h: width   800 start  816 end  896 total 1056 skew    0 clock  46.88KHz
        v: height  600 start  601 end  604 total  625           clock  75.00Hz
  800x600 (0x28a) 50.000MHz +HSync +VSync
        h: width   800 start  856 end  976 total 1040 skew    0 clock  48.08KHz
        v: height  600 start  637 end  643 total  666           clock  72.19Hz
  800x600 (0x28b) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  800x600 (0x28c) 36.000MHz +HSync +VSync
        h: width   800 start  824 end  896 total 1024 skew    0 clock  35.16KHz
        v: height  600 start  601 end  603 total  625           clock  56.25Hz
  640x480 (0x28d) 31.500MHz -HSync -VSync
        h: width   640 start  656 end  720 total  840 skew    0 clock  37.50KHz
        v: height  480 start  481 end  484 total  500           clock  75.00Hz
  640x480 (0x28e) 31.500MHz -HSync -VSync
        h: width   640 start  656 end  696 total  832 skew    0 clock  37.86KHz
        v: height  480 start  481 end  484 total  520           clock  72.81Hz
  640x480 (0x28f) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz

Edit:

V1del wrote:

including it in the initramfs anyway.

Yeah, adding nvidia to kernel options was not effective either.

Last edited by quequotion (2019-09-13 13:05:33)

Offline

#13 2019-09-13 14:53:05

Maniaxx
Member
Registered: 2014-05-14
Posts: 732

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

Anything suspicious in the logs (dmesg, journalctl, xorg.log)?


sys2064

Offline

#14 2019-09-14 14:09:25

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 813
Website

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

Maniaxx wrote:

Anything suspicious in the logs (dmesg, journalctl, xorg.log)?

Unrelated? Looks bad (dmesg highlight):

[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c9907fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9908000-0x00000000ca0b2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca0b3000-0x00000000ca332fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ca333000-0x00000000ca337fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ca338000-0x00000000ca37afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ca37b000-0x00000000cac77fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cac78000-0x00000000caff1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000caff2000-0x00000000caffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f5fffff] usable
[    0.000000] too many entries; ignoring [mem 0x0982a000-0x0982afff]
[    0.000000] too many entries; ignoring [mem 0x0982b000-0x0982cfff]
[    0.000000] too many entries; ignoring [mem 0x0982d000-0x0982dfff]
[    0.000000] too many entries; ignoring [mem 0x0982e000-0x0982ffff]
[    0.000000] too many entries; ignoring [mem 0x09830000-0x09834fff]
[    0.000000] too many entries; ignoring [mem 0x09835000-0x09846fff]
[    0.000000] too many entries; ignoring [mem 0x09847000-0x0984cfff]
[    0.000000] too many entries; ignoring [mem 0x0984d000-0x0985cfff]
[    0.000000] too many entries; ignoring [mem 0x0985d000-0x09870fff]
[    0.000000] too many entries; ignoring [mem 0x09871000-0x0988efff]
[    0.000000] too many entries; ignoring [mem 0x0988f000-0x0989bfff]
[    0.000000] too many entries; ignoring [mem 0x0989c000-0x098a4fff]
[    0.000000] too many entries; ignoring [mem 0x098a5000-0x098a6fff]
[    0.000000] too many entries; ignoring [mem 0x098a7000-0x098a9fff]
[    0.000000] too many entries; ignoring [mem 0x098aa000-0x098abfff]
[    0.000000] too many entries; ignoring [mem 0x098ac000-0x099e8fff]
[    0.000000] too many entries; ignoring [mem 0x099e9000-0x099eafff]
[    0.000000] too many entries; ignoring [mem 0x099eb000-0x09e0afff]
[    0.000000] too many entries; ignoring [mem 0x09e0b000-0x09e19fff]
[    0.000000] too many entries; ignoring [mem 0x09e1a000-0x09e2bfff]
[    0.000000] too many entries; ignoring [mem 0x09e2c000-0x09e41fff]
[    0.000000] too many entries; ignoring [mem 0x09e42000-0x09e42fff]
[    0.000000] too many entries; ignoring [mem 0x09e43000-0x09e5dfff]
[    0.000000] too many entries; ignoring [mem 0x09e5e000-0x09e60fff]
[    0.000000] too many entries; ignoring [mem 0x09e61000-0x09eb6fff]
[    0.000000] too many entries; ignoring [mem 0x09eb7000-0x09f03fff]
[    0.000000] too many entries; ignoring [mem 0x09f04000-0x09f53fff]
[    0.000000] too many entries; ignoring [mem 0x09f54000-0x0a0a0fff]
[    0.000000] too many entries; ignoring [mem 0x0a0a1000-0x0a101fff]
[    0.000000] too many entries; ignoring [mem 0x0a102000-0x0a48efff]
[    0.000000] too many entries; ignoring [mem 0x0a48f000-0x0aa38fff]
[    0.000000] too many entries; ignoring [mem 0x0aa39000-0x0c52bfff]
[    0.000000] too many entries; ignoring [mem 0x0c52c000-0x1fffffff]
[    0.000000] too many entries; ignoring [mem 0x20000000-0x201fffff]
[    0.000000] too many entries; ignoring [mem 0x20200000-0x3fffffff]
[    0.000000] too many entries; ignoring [mem 0x40000000-0x401fffff]
[    0.000000] too many entries; ignoring [mem 0x40200000-0x7eb62fff]
[    0.000000] too many entries; ignoring [mem 0x7eb63000-0x7fffefff]
[    0.000000] too many entries; ignoring [mem 0x7ffff000-0xc9906fff]
[    0.000000] too many entries; ignoring [mem 0xc9907000-0xc9907fff]
[    0.000000] too many entries; ignoring [mem 0xc9908000-0xc9b3afff]
[    0.000000] too many entries; ignoring [mem 0xc9b3b000-0xc9b88fff]
[    0.000000] too many entries; ignoring [mem 0xc9b89000-0xc9b94fff]
[    0.000000] too many entries; ignoring [mem 0xc9b95000-0xc9b98fff]
[    0.000000] too many entries; ignoring [mem 0xc9b99000-0xc9b9afff]
[    0.000000] too many entries; ignoring [mem 0xc9b9b000-0xc9bb2fff]
[    0.000000] too many entries; ignoring [mem 0xc9bb3000-0xc9dd8fff]
[    0.000000] too many entries; ignoring [mem 0xc9dd9000-0xca047fff]
[    0.000000] too many entries; ignoring [mem 0xca048000-0xca055fff]
[    0.000000] too many entries; ignoring [mem 0xca056000-0xca0b2fff]
[    0.000000] too many entries; ignoring [mem 0xca0b3000-0xca285fff]
[    0.000000] too many entries; ignoring [mem 0xca286000-0xca325fff]
[    0.000000] too many entries; ignoring [mem 0xca326000-0xca32dfff]
[    0.000000] too many entries; ignoring [mem 0xca32e000-0xca332fff]
[    0.000000] too many entries; ignoring [mem 0xca333000-0xca336fff]
[    0.000000] too many entries; ignoring [mem 0xca337000-0xca337fff]
[    0.000000] too many entries; ignoring [mem 0xca338000-0xca37afff]
[    0.000000] too many entries; ignoring [mem 0xca37b000-0xca4c6fff]
[    0.000000] too many entries; ignoring [mem 0xca4c7000-0xcac67fff]
[    0.000000] too many entries; ignoring [mem 0xcac68000-0xcac6bfff]
[    0.000000] too many entries; ignoring [mem 0xcac6c000-0xcac6dfff]
[    0.000000] too many entries; ignoring [mem 0xcac6e000-0xcac6efff]
[    0.000000] too many entries; ignoring [mem 0xcac6f000-0xcac70fff]
[    0.000000] too many entries; ignoring [mem 0xcac71000-0xcac77fff]
[    0.000000] too many entries; ignoring [mem 0xcac78000-0xcaff1fff]
[    0.000000] too many entries; ignoring [mem 0xcaff2000-0xcaffffff]
[    0.000000] too many entries; ignoring [mem 0x100000000-0x42f5fffff]
[    0.000000] too many entries; ignoring [mem 0xcb800000-0xcf9fffff]
[    0.000000] too many entries; ignoring [mem 0xf8000000-0xfbffffff]
[    0.000000] too many entries; ignoring [mem 0xfec00000-0xfec00fff]
[    0.000000] too many entries; ignoring [mem 0xfed00000-0xfed03fff]
[    0.000000] too many entries; ignoring [mem 0xfed1c000-0xfed1ffff]
[    0.000000] too many entries; ignoring [mem 0xfee00000-0xfee00fff]
[    0.000000] too many entries; ignoring [mem 0xff000000-0xffffffff]

Too many entries in BIOS memory?
Backed up thermal event logs or something?

dmesg:

[    0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[    0.000000] Linux version 5.0.3-1-ck (zombie@Shiroko) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Fri Mar 22 01:17:15 JST 2019
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux-ck.img root=PARTUUID=0b60bb47-7bfa-4743-a9ab-4911f1cec7f3 rootfstype=ext4 rootflags=rw,nodiratime,relatime,journal_checksum,journal_async_commit,commit=60,max_batch_time=30000,stripe=128,data=writeback,inode_readahead_blks=64 resume=PARTUUID=0b60bb47-7bfa-4743-a9ab-4911f1cec7f3 resume_offset=2164736 add_efi_memmap rw quiet loglevel=3 rd.systemd.show_status=auto rd.udev.log_priority=3 nvidia-drm.modeset=1 video=DVI-D-0:1920x1080MR@60D vt.global_cursor_default=0 fsck.repair=preen
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c9907fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9908000-0x00000000ca0b2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca0b3000-0x00000000ca332fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ca333000-0x00000000ca337fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ca338000-0x00000000ca37afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ca37b000-0x00000000cac77fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cac78000-0x00000000caff1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000caff2000-0x00000000caffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f5fffff] usable
[    0.000000] too many entries; ignoring [mem 0x0982a000-0x0982afff]
[    0.000000] too many entries; ignoring [mem 0x0982b000-0x0982cfff]
[    0.000000] too many entries; ignoring [mem 0x0982d000-0x0982dfff]
[    0.000000] too many entries; ignoring [mem 0x0982e000-0x0982ffff]
[    0.000000] too many entries; ignoring [mem 0x09830000-0x09834fff]
[    0.000000] too many entries; ignoring [mem 0x09835000-0x09846fff]
[    0.000000] too many entries; ignoring [mem 0x09847000-0x0984cfff]
[    0.000000] too many entries; ignoring [mem 0x0984d000-0x0985cfff]
[    0.000000] too many entries; ignoring [mem 0x0985d000-0x09870fff]
[    0.000000] too many entries; ignoring [mem 0x09871000-0x0988efff]
[    0.000000] too many entries; ignoring [mem 0x0988f000-0x0989bfff]
[    0.000000] too many entries; ignoring [mem 0x0989c000-0x098a4fff]
[    0.000000] too many entries; ignoring [mem 0x098a5000-0x098a6fff]
[    0.000000] too many entries; ignoring [mem 0x098a7000-0x098a9fff]
[    0.000000] too many entries; ignoring [mem 0x098aa000-0x098abfff]
[    0.000000] too many entries; ignoring [mem 0x098ac000-0x099e8fff]
[    0.000000] too many entries; ignoring [mem 0x099e9000-0x099eafff]
[    0.000000] too many entries; ignoring [mem 0x099eb000-0x09e0afff]
[    0.000000] too many entries; ignoring [mem 0x09e0b000-0x09e19fff]
[    0.000000] too many entries; ignoring [mem 0x09e1a000-0x09e2bfff]
[    0.000000] too many entries; ignoring [mem 0x09e2c000-0x09e41fff]
[    0.000000] too many entries; ignoring [mem 0x09e42000-0x09e42fff]
[    0.000000] too many entries; ignoring [mem 0x09e43000-0x09e5dfff]
[    0.000000] too many entries; ignoring [mem 0x09e5e000-0x09e60fff]
[    0.000000] too many entries; ignoring [mem 0x09e61000-0x09eb6fff]
[    0.000000] too many entries; ignoring [mem 0x09eb7000-0x09f03fff]
[    0.000000] too many entries; ignoring [mem 0x09f04000-0x09f53fff]
[    0.000000] too many entries; ignoring [mem 0x09f54000-0x0a0a0fff]
[    0.000000] too many entries; ignoring [mem 0x0a0a1000-0x0a101fff]
[    0.000000] too many entries; ignoring [mem 0x0a102000-0x0a48efff]
[    0.000000] too many entries; ignoring [mem 0x0a48f000-0x0aa38fff]
[    0.000000] too many entries; ignoring [mem 0x0aa39000-0x0c52bfff]
[    0.000000] too many entries; ignoring [mem 0x0c52c000-0x1fffffff]
[    0.000000] too many entries; ignoring [mem 0x20000000-0x201fffff]
[    0.000000] too many entries; ignoring [mem 0x20200000-0x3fffffff]
[    0.000000] too many entries; ignoring [mem 0x40000000-0x401fffff]
[    0.000000] too many entries; ignoring [mem 0x40200000-0x7eb62fff]
[    0.000000] too many entries; ignoring [mem 0x7eb63000-0x7fffefff]
[    0.000000] too many entries; ignoring [mem 0x7ffff000-0xc9906fff]
[    0.000000] too many entries; ignoring [mem 0xc9907000-0xc9907fff]
[    0.000000] too many entries; ignoring [mem 0xc9908000-0xc9b3afff]
[    0.000000] too many entries; ignoring [mem 0xc9b3b000-0xc9b88fff]
[    0.000000] too many entries; ignoring [mem 0xc9b89000-0xc9b94fff]
[    0.000000] too many entries; ignoring [mem 0xc9b95000-0xc9b98fff]
[    0.000000] too many entries; ignoring [mem 0xc9b99000-0xc9b9afff]
[    0.000000] too many entries; ignoring [mem 0xc9b9b000-0xc9bb2fff]
[    0.000000] too many entries; ignoring [mem 0xc9bb3000-0xc9dd8fff]
[    0.000000] too many entries; ignoring [mem 0xc9dd9000-0xca047fff]
[    0.000000] too many entries; ignoring [mem 0xca048000-0xca055fff]
[    0.000000] too many entries; ignoring [mem 0xca056000-0xca0b2fff]
[    0.000000] too many entries; ignoring [mem 0xca0b3000-0xca285fff]
[    0.000000] too many entries; ignoring [mem 0xca286000-0xca325fff]
[    0.000000] too many entries; ignoring [mem 0xca326000-0xca32dfff]
[    0.000000] too many entries; ignoring [mem 0xca32e000-0xca332fff]
[    0.000000] too many entries; ignoring [mem 0xca333000-0xca336fff]
[    0.000000] too many entries; ignoring [mem 0xca337000-0xca337fff]
[    0.000000] too many entries; ignoring [mem 0xca338000-0xca37afff]
[    0.000000] too many entries; ignoring [mem 0xca37b000-0xca4c6fff]
[    0.000000] too many entries; ignoring [mem 0xca4c7000-0xcac67fff]
[    0.000000] too many entries; ignoring [mem 0xcac68000-0xcac6bfff]
[    0.000000] too many entries; ignoring [mem 0xcac6c000-0xcac6dfff]
[    0.000000] too many entries; ignoring [mem 0xcac6e000-0xcac6efff]
[    0.000000] too many entries; ignoring [mem 0xcac6f000-0xcac70fff]
[    0.000000] too many entries; ignoring [mem 0xcac71000-0xcac77fff]
[    0.000000] too many entries; ignoring [mem 0xcac78000-0xcaff1fff]
[    0.000000] too many entries; ignoring [mem 0xcaff2000-0xcaffffff]
[    0.000000] too many entries; ignoring [mem 0x100000000-0x42f5fffff]
[    0.000000] too many entries; ignoring [mem 0xcb800000-0xcf9fffff]
[    0.000000] too many entries; ignoring [mem 0xf8000000-0xfbffffff]
[    0.000000] too many entries; ignoring [mem 0xfec00000-0xfec00fff]
[    0.000000] too many entries; ignoring [mem 0xfed00000-0xfed03fff]
[    0.000000] too many entries; ignoring [mem 0xfed1c000-0xfed1ffff]
[    0.000000] too many entries; ignoring [mem 0xfee00000-0xfee00fff]
[    0.000000] too many entries; ignoring [mem 0xff000000-0xffffffff]
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x09e32018-0x09e41457] usable ==> usable
[    0.000000] e820: update [mem 0x09e32018-0x09e41457] usable ==> usable
[    0.000000] e820: update [mem 0x09eb7018-0x09ec7057] usable ==> usable
[    0.000000] e820: update [mem 0x09eb7018-0x09ec7057] usable ==> usable
[    0.000000] e820: update [mem 0x09ec8018-0x09ecec57] usable ==> usable
[    0.000000] e820: update [mem 0x09ec8018-0x09ecec57] usable ==> usable
[    0.000000] e820: update [mem 0x09ecf018-0x09edd657] usable ==> usable
[    0.000000] e820: update [mem 0x09ecf018-0x09edd657] usable ==> usable
[    0.000000] e820: update [mem 0x09ede018-0x09efbc57] usable ==> usable
[    0.000000] e820: update [mem 0x09ede018-0x09efbc57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009e32017] usable
[    0.000000] reserve setup_data: [mem 0x0000000009e32018-0x0000000009e41457] usable
[    0.000000] reserve setup_data: [mem 0x0000000009e41458-0x0000000009eb7017] usable
[    0.000000] reserve setup_data: [mem 0x0000000009eb7018-0x0000000009ec7057] usable
[    0.000000] reserve setup_data: [mem 0x0000000009ec7058-0x0000000009ec8017] usable
[    0.000000] reserve setup_data: [mem 0x0000000009ec8018-0x0000000009ecec57] usable
[    0.000000] reserve setup_data: [mem 0x0000000009ecec58-0x0000000009ecf017] usable
[    0.000000] reserve setup_data: [mem 0x0000000009ecf018-0x0000000009edd657] usable
[    0.000000] reserve setup_data: [mem 0x0000000009edd658-0x0000000009ede017] usable
[    0.000000] reserve setup_data: [mem 0x0000000009ede018-0x0000000009efbc57] usable
[    0.000000] reserve setup_data: [mem 0x0000000009efbc58-0x000000001fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040200000-0x00000000c9907fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c9908000-0x00000000ca0b2fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ca0b3000-0x00000000ca332fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000ca333000-0x00000000ca337fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000ca338000-0x00000000ca37afff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000ca37b000-0x00000000cac77fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000cac78000-0x00000000caff1fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000caff2000-0x00000000caffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000042f5fffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xca318000  ACPI 2.0=0xca318000  SMBIOS=0xf0480  MPS=0xfca30 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Extreme4 Gen3, BIOS P2.30 06/29/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3491.975 MHz processor
[    0.002374] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002376] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002383] last_pfn = 0x42f600 max_arch_pfn = 0x400000000
[    0.002386] MTRR default type: uncachable
[    0.002387] MTRR fixed ranges enabled:
[    0.002388]   00000-9FFFF write-back
[    0.002388]   A0000-BFFFF uncachable
[    0.002389]   C0000-DBFFF write-protect
[    0.002389]   DC000-DFFFF uncachable
[    0.002390]   E0000-FFFFF write-protect
[    0.002390] MTRR variable ranges enabled:
[    0.002391]   0 base 000000000 mask C00000000 write-back
[    0.002392]   1 base 400000000 mask FE0000000 write-back
[    0.002393]   2 base 420000000 mask FF0000000 write-back
[    0.002393]   3 base 0E0000000 mask FE0000000 uncachable
[    0.002394]   4 base 0D0000000 mask FF0000000 uncachable
[    0.002395]   5 base 0CC000000 mask FFC000000 uncachable
[    0.002395]   6 base 0CB800000 mask FFF800000 uncachable
[    0.002396]   7 base 42F800000 mask FFF800000 uncachable
[    0.002397]   8 base 42F600000 mask FFFE00000 uncachable
[    0.002397]   9 disabled
[    0.003233] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003419] total RAM covered: 16302M
[    0.003568]  gran_size: 64K 	chunk_size: 64K 	num_reg: 10  	lose cover RAM: 118M
[    0.003569]  gran_size: 64K 	chunk_size: 128K 	num_reg: 10  	lose cover RAM: 118M
[    0.003570]  gran_size: 64K 	chunk_size: 256K 	num_reg: 10  	lose cover RAM: 118M
[    0.003570]  gran_size: 64K 	chunk_size: 512K 	num_reg: 10  	lose cover RAM: 118M
[    0.003571]  gran_size: 64K 	chunk_size: 1M 	num_reg: 10  	lose cover RAM: 118M
[    0.003572]  gran_size: 64K 	chunk_size: 2M 	num_reg: 10  	lose cover RAM: 118M
[    0.003573]  gran_size: 64K 	chunk_size: 4M 	num_reg: 10  	lose cover RAM: 118M
[    0.003573]  gran_size: 64K 	chunk_size: 8M 	num_reg: 10  	lose cover RAM: 118M
[    0.003574] *BAD*gran_size: 64K 	chunk_size: 16M 	num_reg: 10  	lose cover RAM: -8M
[    0.003575] *BAD*gran_size: 64K 	chunk_size: 32M 	num_reg: 10  	lose cover RAM: -8M
[    0.003576] *BAD*gran_size: 64K 	chunk_size: 64M 	num_reg: 10  	lose cover RAM: -8M
[    0.003576] *BAD*gran_size: 64K 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: -8M
[    0.003577] *BAD*gran_size: 64K 	chunk_size: 256M 	num_reg: 10  	lose cover RAM: -8M
[    0.003578] *BAD*gran_size: 64K 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: -264M
[    0.003579] *BAD*gran_size: 64K 	chunk_size: 1G 	num_reg: 10  	lose cover RAM: -256M
[    0.003579] *BAD*gran_size: 64K 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: -1280M
[    0.003580]  gran_size: 128K 	chunk_size: 128K 	num_reg: 10  	lose cover RAM: 118M
[    0.003581]  gran_size: 128K 	chunk_size: 256K 	num_reg: 10  	lose cover RAM: 118M
[    0.003582]  gran_size: 128K 	chunk_size: 512K 	num_reg: 10  	lose cover RAM: 118M
[    0.003582]  gran_size: 128K 	chunk_size: 1M 	num_reg: 10  	lose cover RAM: 118M
[    0.003583]  gran_size: 128K 	chunk_size: 2M 	num_reg: 10  	lose cover RAM: 118M
[    0.003584]  gran_size: 128K 	chunk_size: 4M 	num_reg: 10  	lose cover RAM: 118M
[    0.003584]  gran_size: 128K 	chunk_size: 8M 	num_reg: 10  	lose cover RAM: 118M
[    0.003585] *BAD*gran_size: 128K 	chunk_size: 16M 	num_reg: 10  	lose cover RAM: -8M
[    0.003586] *BAD*gran_size: 128K 	chunk_size: 32M 	num_reg: 10  	lose cover RAM: -8M
[    0.003587] *BAD*gran_size: 128K 	chunk_size: 64M 	num_reg: 10  	lose cover RAM: -8M
[    0.003587] *BAD*gran_size: 128K 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: -8M
[    0.003588] *BAD*gran_size: 128K 	chunk_size: 256M 	num_reg: 10  	lose cover RAM: -8M
[    0.003589] *BAD*gran_size: 128K 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: -264M
[    0.003589] *BAD*gran_size: 128K 	chunk_size: 1G 	num_reg: 10  	lose cover RAM: -256M
[    0.003590] *BAD*gran_size: 128K 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: -1280M
[    0.003591]  gran_size: 256K 	chunk_size: 256K 	num_reg: 10  	lose cover RAM: 118M
[    0.003592]  gran_size: 256K 	chunk_size: 512K 	num_reg: 10  	lose cover RAM: 118M
[    0.003592]  gran_size: 256K 	chunk_size: 1M 	num_reg: 10  	lose cover RAM: 118M
[    0.003593]  gran_size: 256K 	chunk_size: 2M 	num_reg: 10  	lose cover RAM: 118M
[    0.003594]  gran_size: 256K 	chunk_size: 4M 	num_reg: 10  	lose cover RAM: 118M
[    0.003594]  gran_size: 256K 	chunk_size: 8M 	num_reg: 10  	lose cover RAM: 118M
[    0.003595] *BAD*gran_size: 256K 	chunk_size: 16M 	num_reg: 10  	lose cover RAM: -8M
[    0.003596] *BAD*gran_size: 256K 	chunk_size: 32M 	num_reg: 10  	lose cover RAM: -8M
[    0.003597] *BAD*gran_size: 256K 	chunk_size: 64M 	num_reg: 10  	lose cover RAM: -8M
[    0.003597] *BAD*gran_size: 256K 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: -8M
[    0.003598] *BAD*gran_size: 256K 	chunk_size: 256M 	num_reg: 10  	lose cover RAM: -8M
[    0.003599] *BAD*gran_size: 256K 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: -264M
[    0.003599] *BAD*gran_size: 256K 	chunk_size: 1G 	num_reg: 10  	lose cover RAM: -256M
[    0.003600] *BAD*gran_size: 256K 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: -1280M
[    0.003601]  gran_size: 512K 	chunk_size: 512K 	num_reg: 10  	lose cover RAM: 118M
[    0.003601]  gran_size: 512K 	chunk_size: 1M 	num_reg: 10  	lose cover RAM: 118M
[    0.003602]  gran_size: 512K 	chunk_size: 2M 	num_reg: 10  	lose cover RAM: 118M
[    0.003603]  gran_size: 512K 	chunk_size: 4M 	num_reg: 10  	lose cover RAM: 118M
[    0.003604]  gran_size: 512K 	chunk_size: 8M 	num_reg: 10  	lose cover RAM: 118M
[    0.003604] *BAD*gran_size: 512K 	chunk_size: 16M 	num_reg: 10  	lose cover RAM: -8M
[    0.003605] *BAD*gran_size: 512K 	chunk_size: 32M 	num_reg: 10  	lose cover RAM: -8M
[    0.003606] *BAD*gran_size: 512K 	chunk_size: 64M 	num_reg: 10  	lose cover RAM: -8M
[    0.003606] *BAD*gran_size: 512K 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: -8M
[    0.003607] *BAD*gran_size: 512K 	chunk_size: 256M 	num_reg: 10  	lose cover RAM: -8M
[    0.003608] *BAD*gran_size: 512K 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: -264M
[    0.003608] *BAD*gran_size: 512K 	chunk_size: 1G 	num_reg: 10  	lose cover RAM: -256M
[    0.003609] *BAD*gran_size: 512K 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: -1280M
[    0.003610]  gran_size: 1M 	chunk_size: 1M 	num_reg: 10  	lose cover RAM: 118M
[    0.003611]  gran_size: 1M 	chunk_size: 2M 	num_reg: 10  	lose cover RAM: 118M
[    0.003611]  gran_size: 1M 	chunk_size: 4M 	num_reg: 10  	lose cover RAM: 118M
[    0.003612]  gran_size: 1M 	chunk_size: 8M 	num_reg: 10  	lose cover RAM: 118M
[    0.003613] *BAD*gran_size: 1M 	chunk_size: 16M 	num_reg: 10  	lose cover RAM: -8M
[    0.003613] *BAD*gran_size: 1M 	chunk_size: 32M 	num_reg: 10  	lose cover RAM: -8M
[    0.003614] *BAD*gran_size: 1M 	chunk_size: 64M 	num_reg: 10  	lose cover RAM: -8M
[    0.003615] *BAD*gran_size: 1M 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: -8M
[    0.003616] *BAD*gran_size: 1M 	chunk_size: 256M 	num_reg: 10  	lose cover RAM: -8M
[    0.003616] *BAD*gran_size: 1M 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: -264M
[    0.003617] *BAD*gran_size: 1M 	chunk_size: 1G 	num_reg: 10  	lose cover RAM: -256M
[    0.003618] *BAD*gran_size: 1M 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: -1280M
[    0.003618]  gran_size: 2M 	chunk_size: 2M 	num_reg: 10  	lose cover RAM: 118M
[    0.003619]  gran_size: 2M 	chunk_size: 4M 	num_reg: 10  	lose cover RAM: 118M
[    0.003620]  gran_size: 2M 	chunk_size: 8M 	num_reg: 10  	lose cover RAM: 118M
[    0.003620] *BAD*gran_size: 2M 	chunk_size: 16M 	num_reg: 10  	lose cover RAM: -8M
[    0.003621] *BAD*gran_size: 2M 	chunk_size: 32M 	num_reg: 10  	lose cover RAM: -8M
[    0.003622] *BAD*gran_size: 2M 	chunk_size: 64M 	num_reg: 10  	lose cover RAM: -8M
[    0.003622] *BAD*gran_size: 2M 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: -8M
[    0.003623] *BAD*gran_size: 2M 	chunk_size: 256M 	num_reg: 10  	lose cover RAM: -8M
[    0.003624] *BAD*gran_size: 2M 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: -264M
[    0.003625] *BAD*gran_size: 2M 	chunk_size: 1G 	num_reg: 10  	lose cover RAM: -256M
[    0.003625] *BAD*gran_size: 2M 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: -1280M
[    0.003626]  gran_size: 4M 	chunk_size: 4M 	num_reg: 10  	lose cover RAM: 118M
[    0.003627]  gran_size: 4M 	chunk_size: 8M 	num_reg: 10  	lose cover RAM: 118M
[    0.003627] *BAD*gran_size: 4M 	chunk_size: 16M 	num_reg: 10  	lose cover RAM: -6M
[    0.003628] *BAD*gran_size: 4M 	chunk_size: 32M 	num_reg: 10  	lose cover RAM: -6M
[    0.003629] *BAD*gran_size: 4M 	chunk_size: 64M 	num_reg: 10  	lose cover RAM: -6M
[    0.003629] *BAD*gran_size: 4M 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: -6M
[    0.003630] *BAD*gran_size: 4M 	chunk_size: 256M 	num_reg: 10  	lose cover RAM: -6M
[    0.003631] *BAD*gran_size: 4M 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: -262M
[    0.003632] *BAD*gran_size: 4M 	chunk_size: 1G 	num_reg: 10  	lose cover RAM: -254M
[    0.003632] *BAD*gran_size: 4M 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: -1278M
[    0.003633]  gran_size: 8M 	chunk_size: 8M 	num_reg: 10  	lose cover RAM: 118M
[    0.003634]  gran_size: 8M 	chunk_size: 16M 	num_reg: 10  	lose cover RAM: 54M
[    0.003634]  gran_size: 8M 	chunk_size: 32M 	num_reg: 10  	lose cover RAM: 6M
[    0.003635]  gran_size: 8M 	chunk_size: 64M 	num_reg: 10  	lose cover RAM: 6M
[    0.003636]  gran_size: 8M 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: 6M
[    0.003637]  gran_size: 8M 	chunk_size: 256M 	num_reg: 10  	lose cover RAM: 6M
[    0.003637] *BAD*gran_size: 8M 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: -250M
[    0.003638]  gran_size: 8M 	chunk_size: 1G 	num_reg: 10  	lose cover RAM: 6M
[    0.003639] *BAD*gran_size: 8M 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: -1018M
[    0.003639]  gran_size: 16M 	chunk_size: 16M 	num_reg: 10  	lose cover RAM: 62M
[    0.003640]  gran_size: 16M 	chunk_size: 32M 	num_reg: 10  	lose cover RAM: 14M
[    0.003641]  gran_size: 16M 	chunk_size: 64M 	num_reg: 10  	lose cover RAM: 14M
[    0.003642]  gran_size: 16M 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: 14M
[    0.003642]  gran_size: 16M 	chunk_size: 256M 	num_reg: 10  	lose cover RAM: 14M
[    0.003643] *BAD*gran_size: 16M 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: -242M
[    0.003644]  gran_size: 16M 	chunk_size: 1G 	num_reg: 10  	lose cover RAM: 14M
[    0.003644] *BAD*gran_size: 16M 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: -1010M
[    0.003645]  gran_size: 32M 	chunk_size: 32M 	num_reg: 10  	lose cover RAM: 46M
[    0.003646]  gran_size: 32M 	chunk_size: 64M 	num_reg: 10  	lose cover RAM: 46M
[    0.003647]  gran_size: 32M 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: 46M
[    0.003647]  gran_size: 32M 	chunk_size: 256M 	num_reg: 10  	lose cover RAM: 46M
[    0.003648] *BAD*gran_size: 32M 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: -210M
[    0.003649]  gran_size: 32M 	chunk_size: 1G 	num_reg: 10  	lose cover RAM: 46M
[    0.003649] *BAD*gran_size: 32M 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: -978M
[    0.003650]  gran_size: 64M 	chunk_size: 64M 	num_reg: 8  	lose cover RAM: 110M
[    0.003651]  gran_size: 64M 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 110M
[    0.003652]  gran_size: 64M 	chunk_size: 256M 	num_reg: 9  	lose cover RAM: 110M
[    0.003652]  gran_size: 64M 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: 110M
[    0.003653]  gran_size: 64M 	chunk_size: 1G 	num_reg: 9  	lose cover RAM: 110M
[    0.003654]  gran_size: 64M 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: 110M
[    0.003654]  gran_size: 128M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 174M
[    0.003655]  gran_size: 128M 	chunk_size: 256M 	num_reg: 9  	lose cover RAM: 174M
[    0.003656]  gran_size: 128M 	chunk_size: 512M 	num_reg: 10  	lose cover RAM: 174M
[    0.003657]  gran_size: 128M 	chunk_size: 1G 	num_reg: 9  	lose cover RAM: 174M
[    0.003657]  gran_size: 128M 	chunk_size: 2G 	num_reg: 10  	lose cover RAM: 174M
[    0.003658]  gran_size: 256M 	chunk_size: 256M 	num_reg: 5  	lose cover RAM: 430M
[    0.003659]  gran_size: 256M 	chunk_size: 512M 	num_reg: 5  	lose cover RAM: 430M
[    0.003659]  gran_size: 256M 	chunk_size: 1G 	num_reg: 6  	lose cover RAM: 430M
[    0.003660]  gran_size: 256M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 430M
[    0.003661]  gran_size: 512M 	chunk_size: 512M 	num_reg: 5  	lose cover RAM: 430M
[    0.003661]  gran_size: 512M 	chunk_size: 1G 	num_reg: 6  	lose cover RAM: 430M
[    0.003662]  gran_size: 512M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 430M
[    0.003663]  gran_size: 1G 	chunk_size: 1G 	num_reg: 4  	lose cover RAM: 942M
[    0.003664]  gran_size: 1G 	chunk_size: 2G 	num_reg: 4  	lose cover RAM: 942M
[    0.003664]  gran_size: 2G 	chunk_size: 2G 	num_reg: 3  	lose cover RAM: 1966M
[    0.003665] mtrr_cleanup: can not find optimal value
[    0.003665] please specify mtrr_gran_size/mtrr_chunk_size
[    0.003669] e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
[    0.003672] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[    0.010992] found SMP MP-table at [mem 0x000fd010-0x000fd01f] mapped at [(____ptrval____)]
[    0.011034] check: Scanning 1 areas for low memory corruption
[    0.011036] Base memory trampoline at [(____ptrval____)] 8b000 size 24576
[    0.011037] reserving inaccessible SNB gfx pages
[    0.011042] BRK [0x218801000, 0x218801fff] PGTABLE
[    0.011043] BRK [0x218802000, 0x218802fff] PGTABLE
[    0.011044] BRK [0x218803000, 0x218803fff] PGTABLE
[    0.011064] BRK [0x218804000, 0x218804fff] PGTABLE
[    0.011065] BRK [0x218805000, 0x218805fff] PGTABLE
[    0.011157] BRK [0x218806000, 0x218806fff] PGTABLE
[    0.011169] BRK [0x218807000, 0x218807fff] PGTABLE
[    0.011181] BRK [0x218808000, 0x218808fff] PGTABLE
[    0.011220] BRK [0x218809000, 0x218809fff] PGTABLE
[    0.011278] BRK [0x21880a000, 0x21880afff] PGTABLE
[    0.011352] BRK [0x21880b000, 0x21880bfff] PGTABLE
[    0.011420] BRK [0x21880c000, 0x21880cfff] PGTABLE
[    0.011605] Secure boot disabled
[    0.011605] RAMDISK: [mem 0x7eb63000-0x7fffefff]
[    0.011610] ACPI: Early table checksum verification disabled
[    0.011613] ACPI: RSDP 0x00000000CA318000 000024 (v02 ALASKA)
[    0.011615] ACPI: XSDT 0x00000000CA318080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.011620] ACPI: FACP 0x00000000CA3225C0 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.011625] ACPI: DSDT 0x00000000CA318190 00A430 (v02 ALASKA A M I    00000014 INTL 20051117)
[    0.011627] ACPI: FACS 0x00000000CA331F80 000040
[    0.011629] ACPI: APIC 0x00000000CA3226B8 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.011632] ACPI: ASF! 0x00000000CA322750 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.011634] ACPI: MCFG 0x00000000CA3227F8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.011637] ACPI: SSDT 0x00000000CA322838 0004A6 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
[    0.011639] ACPI: AAFT 0x00000000CA322CE0 0000C2 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.011642] ACPI: HPET 0x00000000CA322DA8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.011644] ACPI: SSDT 0x00000000CA322DE0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.011646] ACPI: SSDT 0x00000000CA323150 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.011649] ACPI: SSDT 0x00000000CA323B00 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.011651] ACPI: BGRT 0x00000000CA324598 00003C (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.011658] ACPI: Local APIC address 0xfee00000
[    0.011686] No NUMA configuration found
[    0.011687] Faking a node at [mem 0x0000000000000000-0x000000042f5fffff]
[    0.011690] NODE_DATA(0) allocated [mem 0x42f5f0000-0x42f5f3fff]
[    0.011712] Zone ranges:
[    0.011713]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011714]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.011715]   Normal   [mem 0x0000000100000000-0x000000042f5fffff]
[    0.011715]   Device   empty
[    0.011716] Movable zone start for each node
[    0.011716] Early memory node ranges
[    0.011717]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.011717]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.011718]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.011718]   node   0: [mem 0x0000000040200000-0x00000000c9907fff]
[    0.011719]   node   0: [mem 0x00000000ca37b000-0x00000000cac77fff]
[    0.011719]   node   0: [mem 0x00000000caff2000-0x00000000caffffff]
[    0.011720]   node   0: [mem 0x0000000100000000-0x000000042f5fffff]
[    0.012024] Zeroed struct page in unavailable ranges: 25167 pages
[    0.012025] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f5fffff]
[    0.012026] On node 0 totalpages: 4166577
[    0.012027]   DMA zone: 64 pages used for memmap
[    0.012027]   DMA zone: 158 pages reserved
[    0.012028]   DMA zone: 3998 pages, LIFO batch:0
[    0.012106]   DMA32 zone: 12857 pages used for memmap
[    0.012107]   DMA32 zone: 822803 pages, LIFO batch:63
[    0.028492]   Normal zone: 52184 pages used for memmap
[    0.028493]   Normal zone: 3339776 pages, LIFO batch:63
[    0.091006] ACPI: PM-Timer IO Port: 0x408
[    0.091009] ACPI: Local APIC address 0xfee00000
[    0.091015] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.091025] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.091027] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.091029] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.091030] ACPI: IRQ0 used by override.
[    0.091031] ACPI: IRQ9 used by override.
[    0.091032] Using ACPI (MADT) for SMP configuration information
[    0.091033] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.091038] efi_bgrt: Ignoring BGRT: invalid image address
[    0.091040] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.091059] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.091061] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.091061] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.091062] PM: Registered nosave memory: [mem 0x09e32000-0x09e32fff]
[    0.091064] PM: Registered nosave memory: [mem 0x09e41000-0x09e41fff]
[    0.091065] PM: Registered nosave memory: [mem 0x09eb7000-0x09eb7fff]
[    0.091066] PM: Registered nosave memory: [mem 0x09ec7000-0x09ec7fff]
[    0.091066] PM: Registered nosave memory: [mem 0x09ec8000-0x09ec8fff]
[    0.091067] PM: Registered nosave memory: [mem 0x09ece000-0x09ecefff]
[    0.091068] PM: Registered nosave memory: [mem 0x09ecf000-0x09ecffff]
[    0.091069] PM: Registered nosave memory: [mem 0x09edd000-0x09eddfff]
[    0.091069] PM: Registered nosave memory: [mem 0x09ede000-0x09edefff]
[    0.091071] PM: Registered nosave memory: [mem 0x09efb000-0x09efbfff]
[    0.091072] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.091073] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.091074] PM: Registered nosave memory: [mem 0xc9908000-0xca0b2fff]
[    0.091075] PM: Registered nosave memory: [mem 0xca0b3000-0xca332fff]
[    0.091075] PM: Registered nosave memory: [mem 0xca333000-0xca337fff]
[    0.091076] PM: Registered nosave memory: [mem 0xca338000-0xca37afff]
[    0.091077] PM: Registered nosave memory: [mem 0xcac78000-0xcaff1fff]
[    0.091078] PM: Registered nosave memory: [mem 0xcb000000-0xcb7fffff]
[    0.091079] PM: Registered nosave memory: [mem 0xcb800000-0xcf9fffff]
[    0.091079] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
[    0.091080] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.091080] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.091081] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.091081] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.091081] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.091082] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.091082] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.091083] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.091083] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.091083] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.091084] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.091085] [mem 0xcfa00000-0xf7ffffff] available for PCI devices
[    0.091086] Booting paravirtualized kernel on bare hardware
[    0.091089] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.175636] random: get_random_bytes called from start_kernel+0x95/0x530 with crng_init=0
[    0.175644] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.175789] percpu: Embedded 44 pages/cpu @(____ptrval____) s139864 r8192 d32168 u262144
[    0.175795] pcpu-alloc: s139864 r8192 d32168 u262144 alloc=1*2097152
[    0.175796] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.175814] Built 1 zonelists, mobility grouping on.  Total pages: 4101314
[    0.175815] Policy zone: Normal
[    0.175816] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-ck.img root=PARTUUID=0b60bb47-7bfa-4743-a9ab-4911f1cec7f3 rootfstype=ext4 rootflags=rw,nodiratime,relatime,journal_checksum,journal_async_commit,commit=60,max_batch_time=30000,stripe=128,data=writeback,inode_readahead_blks=64 resume=PARTUUID=0b60bb47-7bfa-4743-a9ab-4911f1cec7f3 resume_offset=2164736 add_efi_memmap rw quiet loglevel=3 rd.systemd.show_status=auto rd.udev.log_priority=3 nvidia-drm.modeset=1 video=DVI-D-0:1920x1080MR@60D vt.global_cursor_default=0 fsck.repair=preen
[    0.178808] Calgary: detecting Calgary via BIOS EBDA area
[    0.178810] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.214262] Memory: 16244448K/16666308K available (10243K kernel code, 1201K rwdata, 3468K rodata, 1464K init, 2200K bss, 421860K reserved, 0K cma-reserved)
[    0.214384] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.214389] Kernel/User page tables isolation: enabled
[    0.214400] ftrace: allocating 34218 entries in 134 pages
[    0.224318] rcu: Preemptible hierarchical RCU implementation.
[    0.224319] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.224319] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.224320] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.224321] 	Tasks RCU enabled.
[    0.224321] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.225443] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16
[    0.225594] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.225634] Console: colour dummy device 80x25
[    0.225641] printk: console [tty0] enabled
[    0.225653] ACPI: Core revision 20181213
[    0.225789] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.225797] hpet clockevent registered
[    0.225801] APIC: Switch to symmetric I/O mode setup
[    0.226206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.230802] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3255b46fa3b, max_idle_ns: 440795324714 ns
[    0.230811] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.95 BogoMIPS (lpj=3491975)
[    0.230812] pid_max: default: 32768 minimum: 301
[    0.244155] LSM: Security Framework initializing
[    0.244156] Yama: becoming mindful.
[    0.244160] AppArmor: AppArmor disabled by boot time parameter
[    0.245914] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.246851] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.246898] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.246928] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.247091] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.247091] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.247095] mce: CPU supports 9 MCE banks
[    0.247103] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.247110] process: using mwait in idle threads
[    0.247112] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.247112] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.247115] Spectre V2 : Mitigation: Full generic retpoline
[    0.247115] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.247115] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.247123] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.247123] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.247125] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.247257] Freeing SMP alternatives memory: 28K
[    0.248850] TSC deadline timer enabled
[    0.248853] smpboot: CPU0: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.251813] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.251845] ... version:                3
[    0.251847] ... bit width:              48
[    0.251848] ... generic registers:      4
[    0.251849] ... value mask:             0000ffffffffffff
[    0.251850] ... max period:             00007fffffffffff
[    0.251851] ... fixed-purpose events:   3
[    0.251852] ... event mask:             000000070000000f
[    0.253806] rcu: Hierarchical SRCU implementation.
[    0.260939] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.262811] smp: Bringing up secondary CPUs ...
[    0.274820] x86: Booting SMP configuration:
[    0.274821] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.284861] smp: Brought up 1 node, 8 CPUs
[    0.284861] smpboot: Max logical packages: 1
[    0.284861] smpboot: Total of 8 processors activated (55871.60 BogoMIPS)
[    0.285885] MuQSS locality CPU 0 to 1: 2
[    0.285886] MuQSS locality CPU 0 to 2: 2
[    0.285887] MuQSS locality CPU 0 to 3: 2
[    0.285887] MuQSS locality CPU 0 to 4: 1
[    0.285888] MuQSS locality CPU 0 to 5: 2
[    0.285888] MuQSS locality CPU 0 to 6: 2
[    0.285889] MuQSS locality CPU 0 to 7: 2
[    0.285890] MuQSS locality CPU 1 to 2: 2
[    0.285890] MuQSS locality CPU 1 to 3: 2
[    0.285891] MuQSS locality CPU 1 to 4: 2
[    0.285892] MuQSS locality CPU 1 to 5: 1
[    0.285892] MuQSS locality CPU 1 to 6: 2
[    0.285893] MuQSS locality CPU 1 to 7: 2
[    0.285893] MuQSS locality CPU 2 to 3: 2
[    0.285894] MuQSS locality CPU 2 to 4: 2
[    0.285895] MuQSS locality CPU 2 to 5: 2
[    0.285895] MuQSS locality CPU 2 to 6: 1
[    0.285896] MuQSS locality CPU 2 to 7: 2
[    0.285896] MuQSS locality CPU 3 to 4: 2
[    0.285897] MuQSS locality CPU 3 to 5: 2
[    0.285898] MuQSS locality CPU 3 to 6: 2
[    0.285898] MuQSS locality CPU 3 to 7: 1
[    0.285899] MuQSS locality CPU 4 to 5: 2
[    0.285900] MuQSS locality CPU 4 to 6: 2
[    0.285900] MuQSS locality CPU 4 to 7: 2
[    0.285901] MuQSS locality CPU 5 to 6: 2
[    0.285901] MuQSS locality CPU 5 to 7: 2
[    0.285902] MuQSS locality CPU 6 to 7: 2
[    0.285903] Sharing MC runqueue from CPU 7 to CPU 0
[    0.285904] Sharing MC runqueue from CPU 7 to CPU 1
[    0.285905] Sharing MC runqueue from CPU 7 to CPU 2
[    0.285905] Sharing MC runqueue from CPU 7 to CPU 3
[    0.285906] Sharing MC runqueue from CPU 7 to CPU 4
[    0.285906] Sharing MC runqueue from CPU 7 to CPU 5
[    0.285907] Sharing MC runqueue from CPU 7 to CPU 6
[    0.285913] CPU 0 RQ order 0 RQ 7
[    0.285913] CPU 1 RQ order 0 RQ 7
[    0.285914] CPU 2 RQ order 0 RQ 7
[    0.285915] CPU 3 RQ order 0 RQ 7
[    0.285915] CPU 4 RQ order 0 RQ 7
[    0.285916] CPU 5 RQ order 0 RQ 7
[    0.285916] CPU 6 RQ order 0 RQ 7
[    0.285917] CPU 7 RQ order 0 RQ 7
[    0.285918] CPU 0 CPU order 0 RQ 0
[    0.285918] CPU 0 CPU order 1 RQ 4
[    0.285919] CPU 0 CPU order 2 RQ 1
[    0.285919] CPU 0 CPU order 3 RQ 2
[    0.285920] CPU 0 CPU order 4 RQ 3
[    0.285921] CPU 0 CPU order 5 RQ 5
[    0.285921] CPU 0 CPU order 6 RQ 6
[    0.285922] CPU 0 CPU order 7 RQ 7
[    0.285922] CPU 1 CPU order 0 RQ 1
[    0.285923] CPU 1 CPU order 1 RQ 5
[    0.285924] CPU 1 CPU order 2 RQ 2
[    0.285924] CPU 1 CPU order 3 RQ 3
[    0.285925] CPU 1 CPU order 4 RQ 4
[    0.285925] CPU 1 CPU order 5 RQ 6
[    0.285926] CPU 1 CPU order 6 RQ 7
[    0.285927] CPU 1 CPU order 7 RQ 0
[    0.285927] CPU 2 CPU order 0 RQ 2
[    0.285928] CPU 2 CPU order 1 RQ 6
[    0.285928] CPU 2 CPU order 2 RQ 3
[    0.285929] CPU 2 CPU order 3 RQ 4
[    0.285930] CPU 2 CPU order 4 RQ 5
[    0.285930] CPU 2 CPU order 5 RQ 7
[    0.285931] CPU 2 CPU order 6 RQ 0
[    0.285931] CPU 2 CPU order 7 RQ 1
[    0.285932] CPU 3 CPU order 0 RQ 3
[    0.285933] CPU 3 CPU order 1 RQ 7
[    0.285933] CPU 3 CPU order 2 RQ 4
[    0.285934] CPU 3 CPU order 3 RQ 5
[    0.285934] CPU 3 CPU order 4 RQ 6
[    0.285935] CPU 3 CPU order 5 RQ 0
[    0.285936] CPU 3 CPU order 6 RQ 1
[    0.285936] CPU 3 CPU order 7 RQ 2
[    0.285937] CPU 4 CPU order 0 RQ 4
[    0.285937] CPU 4 CPU order 1 RQ 0
[    0.285938] CPU 4 CPU order 2 RQ 3
[    0.285939] CPU 4 CPU order 3 RQ 2
[    0.285939] CPU 4 CPU order 4 RQ 1
[    0.285940] CPU 4 CPU order 5 RQ 7
[    0.285940] CPU 4 CPU order 6 RQ 6
[    0.285941] CPU 4 CPU order 7 RQ 5
[    0.285942] CPU 5 CPU order 0 RQ 5
[    0.285942] CPU 5 CPU order 1 RQ 1
[    0.285943] CPU 5 CPU order 2 RQ 4
[    0.285944] CPU 5 CPU order 3 RQ 3
[    0.285944] CPU 5 CPU order 4 RQ 2
[    0.285945] CPU 5 CPU order 5 RQ 0
[    0.285945] CPU 5 CPU order 6 RQ 7
[    0.285946] CPU 5 CPU order 7 RQ 6
[    0.285947] CPU 6 CPU order 0 RQ 6
[    0.285947] CPU 6 CPU order 1 RQ 2
[    0.285948] CPU 6 CPU order 2 RQ 5
[    0.285948] CPU 6 CPU order 3 RQ 4
[    0.285949] CPU 6 CPU order 4 RQ 3
[    0.285950] CPU 6 CPU order 5 RQ 1
[    0.285950] CPU 6 CPU order 6 RQ 0
[    0.285951] CPU 6 CPU order 7 RQ 7
[    0.285951] CPU 7 CPU order 0 RQ 7
[    0.285952] CPU 7 CPU order 1 RQ 3
[    0.285953] CPU 7 CPU order 2 RQ 6
[    0.285953] CPU 7 CPU order 3 RQ 5
[    0.285954] CPU 7 CPU order 4 RQ 4
[    0.285954] CPU 7 CPU order 5 RQ 2
[    0.285955] CPU 7 CPU order 6 RQ 1
[    0.285956] CPU 7 CPU order 7 RQ 0
[    0.285956] MuQSS runqueue share type MC total runqueues: 1
[    0.286306] devtmpfs: initialized
[    0.286306] x86/mm: Memory block size: 128MB
[    0.286871] PM: Registering ACPI NVS region [mem 0xca0b3000-0xca332fff] (2621440 bytes)
[    0.286898] PM: Registering ACPI NVS region [mem 0xca338000-0xca37afff] (274432 bytes)
[    0.286934] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.286934] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.286934] pinctrl core: initialized pinctrl subsystem
[    0.286934] RTC time: 13:53:26, date: 2019-09-14
[    0.287017] NET: Registered protocol family 16
[    0.287881] audit: initializing netlink subsys (disabled)
[    0.287900] audit: type=2000 audit(1568469206.062:1): state=initialized audit_enabled=0 res=1
[    0.287971] cpuidle: using governor ladder
[    0.287971] cpuidle: using governor menu
[    0.287971] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.287971] ACPI: bus type PCI registered
[    0.287971] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.287971] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.287971] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.287971] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.288006] PCI: Using configuration type 1 for base access
[    0.288057] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.288855] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.288910] ACPI: Added _OSI(Module Device)
[    0.288910] ACPI: Added _OSI(Processor Device)
[    0.288910] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.288910] ACPI: Added _OSI(Processor Aggregator Device)
[    0.288910] ACPI: Added _OSI(Linux-Dell-Video)
[    0.288910] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.288910] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.295729] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.298295] ACPI: Dynamic OEM Table Load:
[    0.298300] ACPI: SSDT 0xFFFF927A1CDE4000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.299093] ACPI: Dynamic OEM Table Load:
[    0.299096] ACPI: SSDT 0xFFFF927A1CEB1400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.299344] ACPI: Dynamic OEM Table Load:
[    0.299344] ACPI: SSDT 0xFFFF927A1C8B2000 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.301348] ACPI: Interpreter enabled
[    0.301366] ACPI: (supports S0 S1 S3 S4 S5)
[    0.301367] ACPI: Using IOAPIC for interrupt routing
[    0.301428] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.301690] ACPI: Enabled 16 GPEs in block 00 to 3F
[    0.310512] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.310517] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.310783] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR]
[    0.310956] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.310957] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.311566] PCI host bridge to bus 0000:00
[    0.311568] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.311569] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.311570] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.311571] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.311572] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[    0.311573] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.311579] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.311678] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.311706] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.311793] pci 0000:00:02.0: [8086:0122] type 00 class 0x038000
[    0.311801] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.311806] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.311810] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.311919] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.311943] pci 0000:00:16.0: reg 0x10: [mem 0xf7d0b000-0xf7d0b00f 64bit]
[    0.312013] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.312107] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.312129] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d08000-0xf7d083ff]
[    0.312208] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.312301] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.312320] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
[    0.312381] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.312478] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.312618] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.312734] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.312815] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.312913] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.312994] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.313091] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.313170] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.313268] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[    0.313348] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.313446] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.313467] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
[    0.313547] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.313639] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
[    0.313825] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[    0.313842] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.313849] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.313856] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.313863] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.313870] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.313877] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d06000-0xf7d067ff]
[    0.313916] pci 0000:00:1f.2: PME# supported from D3hot
[    0.314002] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.314020] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
[    0.314039] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.314164] pci 0000:01:00.0: [10de:1284] type 00 class 0x030000
[    0.314176] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.314183] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.314190] pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
[    0.314195] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.314200] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.314204] pci 0000:01:00.0: enabling Extended Tags
[    0.314212] pci 0000:01:00.0: BAR 3: assigned to efifb
[    0.314272] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
[    0.314282] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.314302] pci 0000:01:00.1: enabling Extended Tags
[    0.314370] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.314372] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.314374] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.314376] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.314430] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.314496] pci 0000:03:00.0: [1b4b:9120] type 00 class 0x010601
[    0.314524] pci 0000:03:00.0: reg 0x10: [io  0xd040-0xd047]
[    0.314536] pci 0000:03:00.0: reg 0x14: [io  0xd030-0xd033]
[    0.314548] pci 0000:03:00.0: reg 0x18: [io  0xd020-0xd027]
[    0.314560] pci 0000:03:00.0: reg 0x1c: [io  0xd010-0xd013]
[    0.314572] pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd00f]
[    0.314585] pci 0000:03:00.0: reg 0x24: [mem 0xf7c10000-0xf7c107ff]
[    0.314597] pci 0000:03:00.0: reg 0x30: [mem 0xf7c00000-0xf7c0ffff pref]
[    0.314613] pci 0000:03:00.0: Enabling fixed DMA alias to 00.1
[    0.314664] pci 0000:03:00.0: PME# supported from D3hot
[    0.314750] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.314754] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.314758] pci 0000:00:1c.4:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.314815] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330
[    0.314854] pci 0000:04:00.0: reg 0x10: [mem 0xf7b00000-0xf7b07fff 64bit]
[    0.314923] pci 0000:04:00.0: enabling Extended Tags
[    0.314995] pci 0000:04:00.0: supports D1 D2
[    0.314996] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.315088] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.315093] pci 0000:00:1c.5:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.315152] pci 0000:05:00.0: [1b6f:7023] type 00 class 0x0c0330
[    0.315190] pci 0000:05:00.0: reg 0x10: [mem 0xf7a00000-0xf7a07fff 64bit]
[    0.315259] pci 0000:05:00.0: enabling Extended Tags
[    0.315330] pci 0000:05:00.0: supports D1 D2
[    0.315331] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.315420] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.315425] pci 0000:00:1c.6:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.315494] pci 0000:06:00.0: [10b5:8608] type 01 class 0x060400
[    0.315535] pci 0000:06:00.0: reg 0x10: [mem 0xf7900000-0xf791ffff]
[    0.315666] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.317830] pci 0000:00:1c.7: PCI bridge to [bus 06-0f]
[    0.317841] pci 0000:00:1c.7:   bridge window [mem 0xf7800000-0xf79fffff]
[    0.317851] pci 0000:00:1c.7:   bridge window [mem 0xec000000-0xf01fffff 64bit pref]
[    0.317995] pci 0000:07:01.0: [10b5:8608] type 01 class 0x060400
[    0.318159] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
[    0.318270] pci 0000:07:04.0: [10b5:8608] type 01 class 0x060400
[    0.318434] pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
[    0.318540] pci 0000:07:05.0: [10b5:8608] type 01 class 0x060400
[    0.318704] pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
[    0.318817] pci 0000:07:06.0: [10b5:8608] type 01 class 0x060400
[    0.318980] pci 0000:07:06.0: PME# supported from D0 D3hot D3cold
[    0.319087] pci 0000:07:07.0: [10b5:8608] type 01 class 0x060400
[    0.319250] pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
[    0.319358] pci 0000:07:08.0: [10b5:8608] type 01 class 0x060400
[    0.319521] pci 0000:07:08.0: PME# supported from D0 D3hot D3cold
[    0.319627] pci 0000:07:09.0: [10b5:8608] type 01 class 0x060400
[    0.319790] pci 0000:07:09.0: PME# supported from D0 D3hot D3cold
[    0.319916] pci 0000:06:00.0: PCI bridge to [bus 07-0f]
[    0.319927] pci 0000:06:00.0:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.319935] pci 0000:06:00.0:   bridge window [mem 0xec000000-0xf01fffff 64bit pref]
[    0.320017] pci 0000:08:00.0: [1172:4c15] type 00 class 0x048000
[    0.320078] pci 0000:08:00.0: reg 0x10: [mem 0xf0101000-0xf0101fff 64bit pref]
[    0.320108] pci 0000:08:00.0: reg 0x18: [mem 0xf0100000-0xf0100fff 64bit pref]
[    0.322841] pci 0000:07:01.0: PCI bridge to [bus 08]
[    0.322875] pci 0000:07:01.0:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[    0.322955] pci 0000:09:00.0: [1b21:1080] type 01 class 0x060401
[    0.323160] pci 0000:07:04.0: PCI bridge to [bus 09-0a]
[    0.323177] pci 0000:07:04.0:   bridge window [mem 0xec000000-0xefffffff 64bit pref]
[    0.323224] pci_bus 0000:0a: extended config space not accessible
[    0.323253] pci 0000:0a:00.0: [4444:0016] type 00 class 0x040000
[    0.323289] pci 0000:0a:00.0: reg 0x10: [mem 0xec000000-0xefffffff pref]
[    0.323599] pci 0000:09:00.0: PCI bridge to [bus 0a] (subtractive decode)
[    0.323629] pci 0000:09:00.0:   bridge window [mem 0xec000000-0xefffffff 64bit pref]
[    0.323630] pci 0000:09:00.0:   bridge window [mem 0xec000000-0xefffffff 64bit pref] (subtractive decode)
[    0.323695] pci 0000:07:05.0: PCI bridge to [bus 0b]
[    0.323791] pci 0000:0c:00.0: [14e4:16b1] type 00 class 0x020000
[    0.323861] pci 0000:0c:00.0: reg 0x10: [mem 0xf0010000-0xf001ffff 64bit pref]
[    0.323891] pci 0000:0c:00.0: reg 0x18: [mem 0xf0000000-0xf000ffff 64bit pref]
[    0.323949] pci 0000:0c:00.0: reg 0x30: [mem 0xf7800000-0xf78007ff pref]
[    0.324115] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[    0.326847] pci 0000:07:06.0: PCI bridge to [bus 0c]
[    0.326864] pci 0000:07:06.0:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.326881] pci 0000:07:06.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.326932] pci 0000:07:07.0: PCI bridge to [bus 0d]
[    0.326999] pci 0000:07:08.0: PCI bridge to [bus 0e]
[    0.327065] pci 0000:07:09.0: PCI bridge to [bus 0f]
[    0.327917] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.327979] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.328040] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.328099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.328159] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.328219] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.328278] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.328338] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.328445] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.328445] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.328445] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.328445] vgaarb: loaded
[    0.328445] ACPI: bus type USB registered
[    0.328445] usbcore: registered new interface driver usbfs
[    0.328445] usbcore: registered new interface driver hub
[    0.328445] usbcore: registered new device driver usb
[    0.328445] pps_core: LinuxPPS API ver. 1 registered
[    0.328445] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.328445] PTP clock support registered
[    0.328445] EDAC MC: Ver: 3.0.0
[    0.328827] Registered efivars operations
[    0.388835] PCI: Using ACPI for IRQ routing
[    0.390038] PCI: pci_cache_line_size set to 64 bytes
[    0.390135] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.390136] e820: reserve RAM buffer [mem 0x09e32018-0x0bffffff]
[    0.390137] e820: reserve RAM buffer [mem 0x09eb7018-0x0bffffff]
[    0.390138] e820: reserve RAM buffer [mem 0x09ec8018-0x0bffffff]
[    0.390139] e820: reserve RAM buffer [mem 0x09ecf018-0x0bffffff]
[    0.390140] e820: reserve RAM buffer [mem 0x09ede018-0x0bffffff]
[    0.390140] e820: reserve RAM buffer [mem 0xc9908000-0xcbffffff]
[    0.390142] e820: reserve RAM buffer [mem 0xcac78000-0xcbffffff]
[    0.390143] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.390143] e820: reserve RAM buffer [mem 0x42f600000-0x42fffffff]
[    0.390210] NetLabel: Initializing
[    0.390211] NetLabel:  domain hash size = 128
[    0.390211] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.390224] NetLabel:  unlabeled traffic allowed by default
[    0.390769] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.390773] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.392823] clocksource: Switched to clocksource tsc-early
[    0.400870] VFS: Disk quotas dquot_6.6.0
[    0.400886] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.400942] pnp: PnP ACPI init
[    0.401054] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.401059] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.401150] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.401152] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.401153] system 00:01: [io  0xffff] has been reserved
[    0.401154] system 00:01: [io  0xffff] has been reserved
[    0.401156] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.401157] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.401158] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.401159] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.401163] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401183] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.401235] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.401238] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.401327] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.401330] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401653] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.401657] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401937] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.401939] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.401940] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.401941] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.401943] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.401944] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.401945] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.401948] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.401949] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.401951] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.401952] system 00:06: [mem 0xcfa00000-0xcfa00fff] has been reserved
[    0.401955] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.402134] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[    0.402136] system 00:07: [mem 0x40000000-0x401fffff] has been reserved
[    0.402139] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.402167] pnp: PnP ACPI: found 8 devices
[    0.407660] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.407682] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.407686] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.407687] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.407815] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcfb00000-0xcfcfffff]
[    0.407819] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcfd00000-0xcfefffff 64bit pref]
[    0.407821] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.407823] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.407825] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.407827] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.407828] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.407831] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.407834] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.407839] pci 0000:00:1c.0:   bridge window [mem 0xcfb00000-0xcfcfffff]
[    0.407844] pci 0000:00:1c.0:   bridge window [mem 0xcfd00000-0xcfefffff 64bit pref]
[    0.407852] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.407854] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.407858] pci 0000:00:1c.4:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.407866] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.407870] pci 0000:00:1c.5:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.407878] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.407882] pci 0000:00:1c.6:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.407890] pci 0000:07:01.0: PCI bridge to [bus 08]
[    0.407900] pci 0000:07:01.0:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[    0.407908] pci 0000:09:00.0: PCI bridge to [bus 0a]
[    0.407923] pci 0000:09:00.0:   bridge window [mem 0xec000000-0xefffffff 64bit pref]
[    0.407936] pci 0000:07:04.0: PCI bridge to [bus 09-0a]
[    0.407945] pci 0000:07:04.0:   bridge window [mem 0xec000000-0xefffffff 64bit pref]
[    0.407953] pci 0000:07:05.0: PCI bridge to [bus 0b]
[    0.407969] pci 0000:07:06.0: PCI bridge to [bus 0c]
[    0.407975] pci 0000:07:06.0:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.407979] pci 0000:07:06.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.407987] pci 0000:07:07.0: PCI bridge to [bus 0d]
[    0.408003] pci 0000:07:08.0: PCI bridge to [bus 0e]
[    0.408018] pci 0000:07:09.0: PCI bridge to [bus 0f]
[    0.408034] pci 0000:06:00.0: PCI bridge to [bus 07-0f]
[    0.408040] pci 0000:06:00.0:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.408045] pci 0000:06:00.0:   bridge window [mem 0xec000000-0xf01fffff 64bit pref]
[    0.408053] pci 0000:00:1c.7: PCI bridge to [bus 06-0f]
[    0.408057] pci 0000:00:1c.7:   bridge window [mem 0xf7800000-0xf79fffff]
[    0.408061] pci 0000:00:1c.7:   bridge window [mem 0xec000000-0xf01fffff 64bit pref]
[    0.408067] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.408068] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.408069] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.408070] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
[    0.408072] pci_bus 0000:00: resource 8 [mem 0xcfa00000-0xfeafffff window]
[    0.408073] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.408074] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.408075] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.408076] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.408077] pci_bus 0000:02: resource 1 [mem 0xcfb00000-0xcfcfffff]
[    0.408078] pci_bus 0000:02: resource 2 [mem 0xcfd00000-0xcfefffff 64bit pref]
[    0.408079] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.408080] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.408082] pci_bus 0000:04: resource 1 [mem 0xf7b00000-0xf7bfffff]
[    0.408083] pci_bus 0000:05: resource 1 [mem 0xf7a00000-0xf7afffff]
[    0.408084] pci_bus 0000:06: resource 1 [mem 0xf7800000-0xf79fffff]
[    0.408085] pci_bus 0000:06: resource 2 [mem 0xec000000-0xf01fffff 64bit pref]
[    0.408086] pci_bus 0000:07: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.408087] pci_bus 0000:07: resource 2 [mem 0xec000000-0xf01fffff 64bit pref]
[    0.408088] pci_bus 0000:08: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[    0.408089] pci_bus 0000:09: resource 2 [mem 0xec000000-0xefffffff 64bit pref]
[    0.408091] pci_bus 0000:0a: resource 2 [mem 0xec000000-0xefffffff 64bit pref]
[    0.408092] pci_bus 0000:0a: resource 4 [mem 0xec000000-0xefffffff 64bit pref]
[    0.408093] pci_bus 0000:0c: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.408094] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.408191] NET: Registered protocol family 2
[    0.408272] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.408320] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.408474] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.408572] TCP: Hash tables configured (established 131072 bind 65536)
[    0.408600] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.408636] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.408693] NET: Registered protocol family 1
[    0.408696] NET: Registered protocol family 44
[    0.424929] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6ad took 15839 usecs
[    0.440922] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6ad took 15597 usecs
[    0.440940] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.440948] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    0.445785] PCI: CLS 64 bytes, default 64
[    0.445819] Unpacking initramfs...
[    2.313640] Freeing initrd memory: 21104K
[    2.313643] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.313644] software IO TLB: mapped [mem 0xc5908000-0xc9908000] (64MB)
[    2.313826] check: Scanning for low memory corruption every 60 seconds
[    2.314252] Initialise system trusted keyrings
[    2.314260] Key type blacklist registered
[    2.314301] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    2.315203] zbud: loaded
[    2.348187] Key type asymmetric registered
[    2.348188] Asymmetric key parser 'x509' registered
[    2.348196] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    2.348246] io scheduler mq-deadline registered
[    2.348247] io scheduler kyber registered
[    2.348281] io scheduler bfq registered
[    2.348587] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[    2.348753] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[    2.348940] pcieport 0000:00:1c.4: Signaling PME with IRQ 26
[    2.349029] pcieport 0000:00:1c.5: Signaling PME with IRQ 27
[    2.349115] pcieport 0000:00:1c.6: Signaling PME with IRQ 28
[    2.349270] pcieport 0000:00:1c.7: Signaling PME with IRQ 29
[    2.350920] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.350976] efifb: probing for efifb
[    2.350990] efifb: No BGRT, not showing boot graphics
[    2.350991] efifb: framebuffer at 0xe9000000, using 3072k, total 3072k
[    2.350992] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    2.350992] efifb: scrolling: redraw
[    2.350993] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.351028] fbcon: Deferring console take-over
[    2.351029] fb0: EFI VGA frame buffer device
[    2.351035] intel_idle: MWAIT substates: 0x1120
[    2.351036] intel_idle: v0.4.1 model 0x2A
[    2.351247] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.351300] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.351308] ACPI: Power Button [PWRB]
[    2.351333] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.351370] ACPI: Power Button [PWRF]
[    2.351753] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.351908] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    2.352267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.353397] usbcore: registered new interface driver usbserial_generic
[    2.353401] usbserial: USB Serial support registered for generic
[    2.353418] rtc_cmos 00:02: RTC can wake from S4
[    2.353551] rtc_cmos 00:02: registered as rtc0
[    2.353564] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.353593] intel_pstate: Intel P-state driver initializing
[    2.354076] ledtrig-cpu: registered to indicate activity on CPUs
[    2.354209] NET: Registered protocol family 10
[    2.357776] Segment Routing with IPv6
[    2.357786] NET: Registered protocol family 17
[    2.358161] RAS: Correctable Errors collector initialized.
[    2.358193] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[    2.358268] microcode: Microcode Update Driver: v2.2.
[    2.358275] sched_clock: Marking stable (2357910351, 185747)->(2375577563, -17481465)
[    2.358428] registered taskstats version 1
[    2.358433] Loading compiled-in X.509 certificates
[    2.360615] Loaded X.509 cert 'Build time autogenerated kernel key: e4631f1289091bd41709b09783bd5eef43509592'
[    2.360629] zswap: loaded using pool lzo/zbud
[    2.364191] Key type big_key registered
[    2.364381]   Magic number: 3:787:887
[    2.364387] graphics fb0: hash matches
[    2.364402] pci 0000:00:1f.0: hash matches
[    2.364489] rtc_cmos 00:02: setting system clock to 2019-09-14T13:53:28 UTC (1568469208)
[    2.365078] Freeing unused kernel image memory: 1464K
[    2.373186] Write protecting the kernel read-only data: 16384k
[    2.373656] Freeing unused kernel image memory: 2020K
[    2.373863] Freeing unused kernel image memory: 628K
[    2.378412] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.378413] x86/mm: Checking user space page tables
[    2.382656] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.382657] MuQSS CPU scheduler v0.190 by Con Kolivas.
[    2.382658] Run /init as init process
[    3.022743] IPMI message handler: version 39.2
[    3.023496] ipmi device interface
[    3.027477] nvidia: loading out-of-tree module taints kernel.
[    3.027483] nvidia: module license 'NVIDIA' taints kernel.
[    3.027484] Disabling lock debugging due to kernel taint
[    3.031238] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    3.038191] nvidia-nvlink: Nvlink Core is being initialized, major device number 242
[    3.038422] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    3.138990] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  435.21  Sun Aug 25 08:17:57 CDT 2019
[    3.140482] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  435.21  Sun Aug 25 08:07:52 CDT 2019
[    3.147008] nvidia-uvm: Loaded the UVM driver, major device number 240.
[    3.148295] Linux agpgart interface v0.103
[    3.162341] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    3.309993] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000dc000-0x000dffff window]
[    3.310117] caller _nv000926rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[    3.329815] tsc: Refined TSC clocksource calibration: 3492.067 MHz
[    3.329818] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32560b09237, max_idle_ns: 440795350722 ns
[    3.329863] clocksource: Switched to clocksource tsc
[    3.766763] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.766763] [drm] No driver support for vblank timestamp query.
[    3.856889] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    3.893419] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.894490] ehci-pci: EHCI PCI platform driver
[    3.894646] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    3.894651] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.894662] ehci-pci 0000:00:1a.0: debug port 2
[    3.896818] SCSI subsystem initialized
[    3.898558] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    3.898572] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d08000
[    3.902078] libata version 3.00 loaded.
[    3.904810] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.904853] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.904854] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.904855] usb usb1: Product: EHCI Host Controller
[    3.904856] usb usb1: Manufacturer: Linux 5.0.3-1-ck ehci_hcd
[    3.904857] usb usb1: SerialNumber: 0000:00:1a.0
[    3.904929] hub 1-0:1.0: USB hub found
[    3.904933] hub 1-0:1.0: 2 ports detected
[    3.905050] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    3.905055] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[    3.905146] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
[    3.905182] ahci 0000:00:1f.2: version 3.0
[    3.905316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.905317] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.905318] usb usb2: Product: xHCI Host Controller
[    3.905319] usb usb2: Manufacturer: Linux 5.0.3-1-ck xhci-hcd
[    3.905319] usb usb2: SerialNumber: 0000:04:00.0
[    3.905370] hub 2-0:1.0: USB hub found
[    3.905381] hub 2-0:1.0: 2 ports detected
[    3.905475] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.905478] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    3.905489] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    3.905491] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    3.905492] ehci-pci 0000:00:1d.0: debug port 2
[    3.905494] xhci_hcd 0000:04:00.0: Host supports USB 3.0  SuperSpeed
[    3.905516] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.905531] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    3.905532] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.905533] usb usb4: Product: xHCI Host Controller
[    3.905533] usb usb4: Manufacturer: Linux 5.0.3-1-ck xhci-hcd
[    3.905534] usb usb4: SerialNumber: 0000:04:00.0
[    3.905585] hub 4-0:1.0: USB hub found
[    3.905596] hub 4-0:1.0: 2 ports detected
[    3.909389] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    3.909395] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d07000
[    3.915398] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
[    3.915403] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    3.915830] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.915911] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.915912] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.915913] usb usb3: Product: EHCI Host Controller
[    3.915914] usb usb3: Manufacturer: Linux 5.0.3-1-ck ehci_hcd
[    3.915914] usb usb3: SerialNumber: 0000:00:1d.0
[    3.915976] hub 3-0:1.0: USB hub found
[    3.915981] hub 3-0:1.0: 2 ports detected
[    3.916091] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.916093] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[    3.916176] xhci_hcd 0000:05:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
[    3.916320] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.916321] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.916322] usb usb5: Product: xHCI Host Controller
[    3.916323] usb usb5: Manufacturer: Linux 5.0.3-1-ck xhci-hcd
[    3.916324] usb usb5: SerialNumber: 0000:05:00.0
[    3.916388] hub 5-0:1.0: USB hub found
[    3.916397] hub 5-0:1.0: 2 ports detected
[    3.916496] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.916498] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[    3.916500] xhci_hcd 0000:05:00.0: Host supports USB 3.0  SuperSpeed
[    3.916517] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.916534] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    3.916535] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.916536] usb usb6: Product: xHCI Host Controller
[    3.916537] usb usb6: Manufacturer: Linux 5.0.3-1-ck xhci-hcd
[    3.916537] usb usb6: SerialNumber: 0000:05:00.0
[    3.916588] hub 6-0:1.0: USB hub found
[    3.916597] hub 6-0:1.0: 2 ports detected
[    3.925254] scsi host0: ahci
[    3.925326] scsi host1: ahci
[    3.925378] scsi host2: ahci
[    3.925446] scsi host3: ahci
[    3.925508] scsi host4: ahci
[    3.925556] scsi host5: ahci
[    3.925589] ata1: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06100 irq 40
[    3.925591] ata2: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06180 irq 40
[    3.925593] ata3: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06200 irq 40
[    3.925595] ata4: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06280 irq 40
[    3.925597] ata5: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06300 irq 40
[    3.925599] ata6: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06380 irq 40
[    3.925770] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    3.925772] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    3.925919] scsi host6: ahci
[    3.925976] scsi host7: ahci
[    3.926014] ata7: SATA max UDMA/133 abar m2048@0xf7c10000 port 0xf7c10100 irq 42
[    3.926017] ata8: SATA max UDMA/133 abar m2048@0xf7c10000 port 0xf7c10180 irq 42
[    4.227830] usb 2-2: new full-speed USB device number 2 using xhci_hcd
[    4.228827] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.231257] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.231281] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.231309] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.231325] ata7: SATA link down (SStatus 0 SControl 330)
[    4.231361] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.231373] ata2: SATA link down (SStatus 0 SControl 300)
[    4.231390] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.232588] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.232589] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.232590] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.232593] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.232595] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.232596] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.232637] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.232638] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.232639] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.232825] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.232829] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.232832] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.233660] ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
[    4.233664] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.233677] ata4.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
[    4.233681] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.233693] ata6.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
[    4.233696] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.233881] ata5.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
[    4.233884] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.235026] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.235027] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.235029] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.235151] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.235153] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.235154] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.235285] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.235290] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.235293] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.235380] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.235381] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.235382] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.236008] ata3.00: configured for UDMA/133
[    4.236212] ata6.00: configured for UDMA/133
[    4.236398] ata4.00: configured for UDMA/133
[    4.236403] ata5.00: configured for UDMA/133
[    4.236817] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    4.240619] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.240624] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.240627] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.243407] ata1.00: ATAPI: HL-DT-ST BD-RE  BH10NS38, 1.00, max UDMA/133
[    4.248493] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.248498] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.248501] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.251275] ata1.00: configured for UDMA/133
[    4.266195] scsi 0:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH10NS38  1.00 PQ: 0 ANSI: 5
[    4.304836] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A52A PQ: 0 ANSI: 5
[    4.305006] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A52A PQ: 0 ANSI: 5
[    4.305159] scsi 4:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A52A PQ: 0 ANSI: 5
[    4.305292] scsi 5:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A52A PQ: 0 ANSI: 5
[    4.356603] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    4.356605] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.356757] hub 1-1:1.0: USB hub found
[    4.356900] hub 1-1:1.0: 6 ports detected
[    4.364605] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    4.364606] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.364875] hub 3-1:1.0: USB hub found
[    4.365005] hub 3-1:1.0: 8 ports detected
[    4.378714] usb 2-2: New USB device found, idVendor=056a, idProduct=033b, bcdDevice= 1.00
[    4.378718] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.378720] usb 2-2: Product: Intuos PS
[    4.378722] usb 2-2: Manufacturer: Wacom Co.,Ltd.
[    4.383334] hidraw: raw HID events driver (C) Jiri Kosina
[    4.385828] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[    4.387533] ata8.00: ATA-8: Hitachi HDS723020BLA642, MN6OA800, max UDMA/133
[    4.387534] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    4.388702] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.388714] sd 2:0:0:0: [sda] Write Protect is off
[    4.388715] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.388727] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.388733] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.388741] sd 3:0:0:0: [sdb] Write Protect is off
[    4.388743] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.388763] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.388767] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.388776] sd 4:0:0:0: [sdc] Write Protect is off
[    4.388777] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    4.388793] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.388798] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.388808] sd 5:0:0:0: [sdd] Write Protect is off
[    4.388810] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    4.388829] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.389236] ata8.00: configured for UDMA/133
[    4.389316] scsi 7:0:0:0: Direct-Access     ATA      Hitachi HDS72302 A800 PQ: 0 ANSI: 5
[    4.389425] sd 7:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.389433] sd 7:0:0:0: [sde] Write Protect is off
[    4.389434] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    4.389444] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.397855] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.397868] sd 5:0:0:0: [sdd] Attached SCSI disk
[    4.400224] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.401599] sd 4:0:0:0: [sdc] Attached SCSI disk
[    4.401715] usbcore: registered new interface driver usbhid
[    4.401716] usbhid: USB HID core driver
[    4.403148] hid-generic 0003:056A:033B.0001: hiddev0,hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:04:00.0-2/input0
[    4.403236] hid-generic 0003:056A:033B.0002: hiddev1,hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:04:00.0-2/input1
[    4.403298] input: Wacom Co.,Ltd. Intuos PS as /devices/pci0000:00/0000:00:1c.5/0000:04:00.0/usb2/2-2/2-2:1.2/0003:056A:033B.0003/input/input3
[    4.403319] hid-generic 0003:056A:033B.0003: input,hidraw2: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos PS] on usb-0000:04:00.0-2/input2
[    4.427085] sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.427086] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.427220] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    4.435782]  sde: sde1
[    4.436003] sd 7:0:0:0: [sde] Attached SCSI removable disk
[    4.513835] md126: detected capacity change from 0 to 2000420864000
[    4.546102]  md126: p1 p2
[    4.556986] random: crng init done
[    4.641844] usb 3-1.1: new full-speed USB device number 3 using ehci-pci
[    4.753392] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01
[    4.753393] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.753394] usb 3-1.1: Product: USB Receiver
[    4.753395] usb 3-1.1: Manufacturer: Logitech
[    4.759693] logitech-djreceiver 0003:046D:C52B.0006: hiddev2,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input2
[    4.822830] usb 3-1.2: new full-speed USB device number 4 using ehci-pci
[    4.866093] input: Logitech Unifying Device. Wireless PID:400a Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:400A.0007/input/input4
[    4.866125] hid-generic 0003:046D:400A.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:1d.0-1.1:1
[    4.881982] input: Logitech M325 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:400A.0007/input/input8
[    4.882017] logitech-hidpp-device 0003:046D:400A.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:1d.0-1.1:1
[    4.884025] input: Logitech K270 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:4003.0008/input/input9
[    4.884046] logitech-hidpp-device 0003:046D:4003.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:1d.0-1.1:2
[    4.889978] input: Logitech K270 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:4003.0009/input/input10
[    4.889997] logitech-hidpp-device 0003:046D:4003.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:1d.0-1.1:3
[    4.895954] input: Logitech M545/M546 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:4052.000A/input/input11
[    4.895981] logitech-hidpp-device 0003:046D:4052.000A: input,hidraw7: USB HID v1.11 Mouse [Logitech M545/M546] on usb-0000:00:1d.0-1.1:4
[    4.996227] usb 3-1.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=48.39
[    4.996229] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.060829] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[    5.100394] PM: Image not found (code -22)
[    5.144098] usb 3-1.3: New USB device found, idVendor=04e6, idProduct=511a, bcdDevice= 2.03
[    5.144099] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.144100] usb 3-1.3: Product: SCR3310-NTTCom USB SmartCard Reader
[    5.144101] usb 3-1.3: Manufacturer: NTT Communications Corp.
[    5.169263] fbcon: Taking over console
[    5.169308] Console: switching to colour frame buffer device 128x48
[    5.209835] usb 3-1.8: new high-speed USB device number 6 using ehci-pci
[    5.231104] EXT4-fs (md126p2): mounted filesystem with writeback data mode. Opts: journal_checksum,journal_async_commit,commit=60,max_batch_time=30000,stripe=128,data=writeback,inode_readahead_blks=64
[    5.493097] usb 3-1.8: New USB device found, idVendor=048d, idProduct=1345, bcdDevice= 1.00
[    5.493098] usb 3-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.493099] usb 3-1.8: Product: Mass Storage Device
[    5.493100] usb 3-1.8: Manufacturer: Generic 
[    5.493100] usb 3-1.8: SerialNumber: 0000000000000006
[    7.686580] systemd[1]: systemd 242.84-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    7.697936] systemd[1]: Detected architecture x86-64.
[    7.709425] systemd[1]: Set hostname to <Shiroko>.
[   10.272790] systemd[1]: Listening on Process Core Dump Socket.
[   10.272860] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.272891] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   10.272915] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.272950] systemd[1]: Listening on udev Kernel Socket.
[   10.272997] systemd[1]: Listening on Journal Socket.
[   10.273007] systemd[1]: Reached target Remote File Systems.
[   10.560808] scsi host8: vhba
[   10.581379] audit: type=1130 audit(1568469216.715:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.581959] audit: type=1130 audit(1568469216.716:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.582222] audit: type=1130 audit(1568469216.716:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.586002] audit: type=1130 audit(1568469216.720:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.594378] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   10.594408] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   10.594432] sd 3:0:0:0: Attached scsi generic sg2 type 0
[   10.594451] sd 4:0:0:0: Attached scsi generic sg3 type 0
[   10.594468] sd 5:0:0:0: Attached scsi generic sg4 type 0
[   10.594485] sd 7:0:0:0: Attached scsi generic sg5 type 0
[   10.617303] audit: type=1130 audit(1568469216.751:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.741699] audit: type=1130 audit(1568469216.875:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.766366] Adding 4194300k swap on /resume.swp.  Priority:-2 extents:73 across:15499264k FS
[   10.815505] systemd-journald[371]: Received request to flush runtime journal from PID 1
[   10.975773] audit: type=1130 audit(1568469217.109:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.394326] audit: type=1130 audit(1568469217.528:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.581661] audit: type=1130 audit(1568469218.715:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.936882] audit: type=1130 audit(1568469219.071:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.159084] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   13.159086] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   13.159087] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.159087] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   13.178249] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20181213/utaddress-213)
[   13.178255] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.178258] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20181213/utaddress-213)
[   13.178261] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181213/utaddress-213)
[   13.178263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.178264] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20181213/utaddress-213)
[   13.178267] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181213/utaddress-213)
[   13.178269] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.178270] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20181213/utaddress-213)
[   13.178272] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181213/utaddress-213)
[   13.178275] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.178275] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.206201] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   13.409754] media: Linux media interface: v0.10
[   13.523134] videodev: Linux video capture interface: v2.00
[   13.534321] tg3.c:v3.137 (May 11, 2014)
[   13.536702] tg3 0000:0c:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:22:35:07
[   13.536703] tg3 0000:0c:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   13.536705] tg3 0000:0c:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   13.536706] tg3 0000:0c:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[   13.561833] Bluetooth: Core ver 2.22
[   13.561846] NET: Registered protocol family 31
[   13.561847] Bluetooth: HCI device and connection manager initialized
[   13.561851] Bluetooth: HCI socket layer initialized
[   13.561852] Bluetooth: L2CAP socket layer initialized
[   13.561859] Bluetooth: SCO socket layer initialized
[   13.618241] tg3 0000:0c:00.0 enp12s0: renamed from eth0
[   13.619153] mousedev: PS/2 mouse device common for all mice
[   13.627816] cryptd: max_cpu_qlen set to 1000
[   13.750043] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   13.750260] snd_hda_intel: probe of 0000:01:00.1 failed with error -2
[   13.805086] usb-storage 3-1.8:1.0: USB Mass Storage device detected
[   13.805148] scsi host9: usb-storage 3-1.8:1.0
[   13.805221] usbcore: registered new interface driver usb-storage
[   13.830250] AVX version of gcm_enc/dec engaged.
[   13.830251] AES CTR mode by8 optimization enabled
[   13.846785] i915 0000:00:02.0: enabling device (0006 -> 0007)
[   13.847293] checking generic (e9000000 300000) vs hw (d0000000 10000000)
[   13.847294] [drm] Replacing VGA console driver
[   13.870833] usbcore: registered new interface driver uas
[   13.882122] earth_pt3 0000:08:00.0: enabling device (0000 -> 0002)
[   13.882249] dvbdev: DVB: registering new adapter (PT3 DVB)
[   13.897808] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.897808] [drm] Driver supports precise vblank timestamp query.
[   13.938028] usbcore: registered new interface driver btusb
[   13.944390] tc90522 4-0011: Toshiba TC90522 attached.
[   13.987931] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 1
[   13.987986] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0
[   13.988021] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   13.994392] ivtv: Start initialization, version 1.4.3
[   13.994529] ivtv0: Initializing card 0
[   13.994530] ivtv0: Autodetected I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner) card (cx23416 based)
[   13.994625] ivtv 0000:0a:00.0: enabling device (0000 -> 0002)
[   13.994673] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[   14.007219] qm1d1c0042 11-0063: Sharp QM1D1C0042 attached.
[   14.007234] earth_pt3 0000:08:00.0: DVB: registering adapter 0 frontend 0 (Toshiba TC90522 ISDB-S module)...
[   14.007268] dvbdev: DVB: registering new adapter (PT3 DVB)
[   14.008113] tc90522 4-0010: Toshiba TC90522 attached.
[   14.039810] mxl301rf 16-0062: MaxLinear MxL301RF attached.
[   14.039825] earth_pt3 0000:08:00.0: DVB: registering adapter 1 frontend 0 (Toshiba TC90522 ISDB-T module)...
[   14.039858] dvbdev: DVB: registering new adapter (PT3 DVB)
[   14.040722] tc90522 4-0013: Toshiba TC90522 attached.
[   14.041383] qm1d1c0042 17-0060: Sharp QM1D1C0042 attached.
[   14.041396] earth_pt3 0000:08:00.0: DVB: registering adapter 2 frontend 0 (Toshiba TC90522 ISDB-S module)...
[   14.041421] dvbdev: DVB: registering new adapter (PT3 DVB)
[   14.042186] tc90522 4-0012: Toshiba TC90522 attached.
[   14.042819] mxl301rf 18-0061: MaxLinear MxL301RF attached.
[   14.042828] earth_pt3 0000:08:00.0: DVB: registering adapter 3 frontend 0 (Toshiba TC90522 ISDB-T module)...
[   14.137577] saa7115 15-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
[   14.151289] [drm] Cannot find any crtc or sizes
[   14.207103] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   14.207106] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.207107] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.207108] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.207110] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   14.207111] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.207112] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   14.207114] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   14.207115] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   14.220617] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.220661] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   14.220700] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   14.220738] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   14.220777] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   14.220821] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   14.220861] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   14.328300] earth_pt3 0000:08:00.0: successfully init'ed PT3 (fw:0x04, I/F:0x01)
[   14.330148] [drm] Cannot find any crtc or sizes
[   14.395516] tda9887 15-0043: creating new instance
[   14.395518] tda9887 15-0043: tda988[5/6/7] found
[   14.396769] tuner: 15-0043: Tuner 74 found with type(s) Radio TV.
[   14.398726] FPGA manager framework
[   14.417074] tea5767: All bytes are equal. It is not a TEA5767
[   14.417078] tuner: 15-0060: Tuner -1 found with type(s) Radio TV.
[   14.439517] upd64031a 15-0012: chip found @ 0x24 (ivtv i2c driver #0)
[   14.477534] upd64083 15-005c: chip found @ 0xb8 (ivtv i2c driver #0)
[   14.489277] [drm] Cannot find any crtc or sizes
[   14.495751] intel_rapl: Found RAPL domain package
[   14.495752] intel_rapl: Found RAPL domain core
[   14.495753] intel_rapl: Found RAPL domain uncore
[   14.513726] wm8739 15-001a: chip found @ 0x34 (ivtv i2c driver #0)
[   14.552669] vp27smpx 15-005b: chip found @ 0xb6 (ivtv i2c driver #0)
[   14.565768] tuner-simple 15-0060: creating new instance
[   14.565769] tuner-simple 15-0060: type set to 46 (Panasonic VP27s/ENGE4324D)
[   14.569304] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[   14.569321] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[   14.569334] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[   14.569347] ivtv0: Registered device video24 for encoder PCM (320 kB)
[   14.569348] ivtv0: Initialized card: I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner)
[   14.569366] ivtv: End initialization
[   14.593048] ivtv_alsa: ivtv-alsa: module loading...
[   14.593277] ivtv_alsa: ivtv0-alsa: snd_ivtv_init: Instance 0 registered as ALSA card 1
[   14.850573] scsi 9:0:0:0: Direct-Access     Generic  Compact Flash    0.00 PQ: 0 ANSI: 2
[   14.851236] scsi 9:0:0:1: Direct-Access     Generic  xD-Picture       0.00 PQ: 0 ANSI: 2
[   14.851788] scsi 9:0:0:2: Direct-Access     Generic  SDXC/MMC         0.00 PQ: 0 ANSI: 2
[   14.852344] scsi 9:0:0:3: Direct-Access     Generic  MS/MS-Pro/HG     0.00 PQ: 0 ANSI: 2
[   14.852525] sd 9:0:0:0: Attached scsi generic sg6 type 0
[   14.852605] sd 9:0:0:1: Attached scsi generic sg7 type 0
[   14.852671] sd 9:0:0:2: Attached scsi generic sg8 type 0
[   14.852740] sd 9:0:0:3: Attached scsi generic sg9 type 0
[   14.854418] sd 9:0:0:0: [sdf] Attached SCSI removable disk
[   15.056269] FAT-fs (md126p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   15.322361] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[   15.526786] tg3 0000:0c:00.0 enp12s0: Link is up at 100 Mbps, full duplex
[   15.526790] tg3 0000:0c:00.0 enp12s0: Flow control is on for TX and on for RX
[   15.526791] tg3 0000:0c:00.0 enp12s0: EEE is disabled
[   15.530077] ivtv0: Encoder revision: 0x02060039
[   15.611422] kauditd_printk_skb: 3 callbacks suppressed
[   15.611423] audit: type=1130 audit(1568469221.746:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.837406] audit: type=1305 audit(1568469221.971:16): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
[   15.837409] audit: type=1305 audit(1568469221.971:17): audit_pid=610 old=0 auid=4294967295 ses=4294967295 res=1
[   16.410085] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
[   18.455559] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.455561] Bluetooth: BNEP filters: protocol multicast
[   18.455565] Bluetooth: BNEP socket layer initialized
[   20.163391] sd 9:0:0:3: [sdi] Attached SCSI removable disk
[   26.307484] sd 9:0:0:1: [sdg] Attached SCSI removable disk
[   27.331980] sd 9:0:0:2: [sdh] Attached SCSI removable disk
[   32.523724] logitech-hidpp-device 0003:046D:4003.0009: HID++ 2.0 device connected.
[   53.787575] logitech-hidpp-device 0003:046D:4052.000A: HID++ 4.5 device connected.
[   54.350998] usb usb2: root hub lost power or was reset
[   54.351001] usb usb4: root hub lost power or was reset
[   54.675907] usb 2-2: reset full-speed USB device number 2 using xhci_hcd
[   65.513137] Bluetooth: RFCOMM TTY layer initialized
[   65.513143] Bluetooth: RFCOMM socket layer initialized
[   65.513147] Bluetooth: RFCOMM ver 1.11
[   69.569619] fuse init (API version 7.28)

journalctl -xe:

-- Logs begin at Sat 2019-09-14 22:54:25 JST, end at Sat 2019-09-14 22:55:34 JST. --
Sep 14 22:54:25 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:25] [NOTICE] [doh-ibksturm] OK (DoH) - rtt: 314ms
Sep 14 22:54:27 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:27] [NOTICE] [encrypt-town] TIMEOUT
Sep 14 22:54:27 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:27] [NOTICE] [ev-va] OK (crypto v2) - rtt: 181ms
Sep 14 22:54:27 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:27] [NOTICE] [ev-to] OK (crypto v2) - rtt: 181ms
Sep 14 22:54:28 Shiroko dbus-daemon[634]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.26' (uid=1000 pid=18972 comm="/usr/bin/pulseaudio --daemonize=no")
Sep 14 22:54:28 Shiroko systemd[1]: Starting RealtimeKit Scheduling Policy Service...
-- Subject: A start job for unit rtkit-daemon.service has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit rtkit-daemon.service has begun execution.
-- 
-- The job identifier is 679.
Sep 14 22:54:28 Shiroko dbus-daemon[634]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Sep 14 22:54:28 Shiroko systemd[1]: Started RealtimeKit Scheduling Policy Service.
-- Subject: A start job for unit rtkit-daemon.service has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit rtkit-daemon.service has finished successfully.
-- 
-- The job identifier is 679.
Sep 14 22:54:28 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 14 22:54:28 Shiroko rtkit-daemon[18973]: Successfully called chroot.
Sep 14 22:54:28 Shiroko rtkit-daemon[18973]: Successfully dropped privileges.
Sep 14 22:54:28 Shiroko rtkit-daemon[18973]: Successfully limited resources.
Sep 14 22:54:28 Shiroko rtkit-daemon[18973]: Running.
Sep 14 22:54:28 Shiroko rtkit-daemon[18973]: Watchdog thread running.
Sep 14 22:54:28 Shiroko rtkit-daemon[18973]: Canary thread running.
Sep 14 22:54:28 Shiroko dbus-daemon[634]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.27' (uid=0 pid=18973 comm="/usr/lib/rtkit-daemon")
Sep 14 22:54:28 Shiroko systemd[1]: Starting Authorization Manager...
-- Subject: A start job for unit polkit.service has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit polkit.service has begun execution.
-- 
-- The job identifier is 748.
Sep 14 22:54:29 Shiroko polkitd[18976]: Started polkitd version 0.116
Sep 14 22:54:29 Shiroko polkitd[18976]: Loading rules from directory /etc/polkit-1/rules.d
Sep 14 22:54:29 Shiroko polkitd[18976]: Loading rules from directory /usr/share/polkit-1/rules.d
Sep 14 22:54:29 Shiroko polkitd[18976]: Finished loading, compiling and executing 5 rules
Sep 14 22:54:29 Shiroko dbus-daemon[634]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Sep 14 22:54:29 Shiroko systemd[1]: Started Authorization Manager.
-- Subject: A start job for unit polkit.service has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit polkit.service has finished successfully.
-- 
-- The job identifier is 748.
Sep 14 22:54:29 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.theverge.com_0.localstorage-wal
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.tomsguide.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.tube8.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.usatoday.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.vice.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.washingtonpost.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.watchepisodeseries.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.watchepisodeseries.com_0.localstorage-shm
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.watchepisodeseries.com_0.localstorage-wal
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.wattpad.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.xnxx.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.xvideos.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.youporn.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www.youtube.com_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: localstorage/https_www2.ffmovies.to_0.localstorage
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: sent 322,803,589 bytes  received 15,666 bytes  19,564,803.33 bytes/sec
Sep 14 22:54:29 Shiroko epiphany-sync[18838]: total size is 322,647,013  speedup is 1.00
Sep 14 22:54:29 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:29] [NOTICE] [faelix] OK (DoH) - rtt: 633ms
Sep 14 22:54:30 Shiroko polkitd[18976]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Sep 14 22:54:30 Shiroko rtkit-daemon[18973]: Successfully made thread 18972 of process 18972 owned by '1000' high priority at nice level -15.
Sep 14 22:54:30 Shiroko rtkit-daemon[18973]: Supervising 1 threads of 1 processes of 1 users.
Sep 14 22:54:30 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:30] [NOTICE] [doh.ffmuc.net] OK (DoH) - rtt: 616ms
Sep 14 22:54:31 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:31] [NOTICE] [freetsa.org] OK (crypto v1) - rtt: 147ms
Sep 14 22:54:31 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:31] [NOTICE] [geekdns-hk] OK (crypto v1) - rtt: 86ms
Sep 14 22:54:32 Shiroko systemd[18831]: Started Sound Service.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 36.
Sep 14 22:54:32 Shiroko bluetoothd[625]: Endpoint registered: sender=:1.37 path=/MediaEndpoint/A2DPSink/sbc
Sep 14 22:54:32 Shiroko bluetoothd[625]: Endpoint registered: sender=:1.37 path=/MediaEndpoint/A2DPSource/sbc
Sep 14 22:54:32 Shiroko pulseaudio.desktop[18940]: [/etc/pulse/client.conf:26] Unknown lvalue ': autospawn' in section 'n/a'.
Sep 14 22:54:32 Shiroko kernel: Bluetooth: RFCOMM TTY layer initialized
Sep 14 22:54:32 Shiroko kernel: Bluetooth: RFCOMM socket layer initialized
Sep 14 22:54:32 Shiroko kernel: Bluetooth: RFCOMM ver 1.11
Sep 14 22:54:32 Shiroko obsession.desktop[19000]: ERROR: could not set PID 18972 to nice -20 - Permission denied
Sep 14 22:54:32 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: core
Sep 14 22:54:32 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: core
Sep 14 22:54:32 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: ccp
Sep 14 22:54:32 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: ccp
Sep 14 22:54:33 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:33] [NOTICE] [geekdns-doh-east] OK (DoH) - rtt: 1082ms
Sep 14 22:54:33 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: composite
Sep 14 22:54:33 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: composite
Sep 14 22:54:33 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: opengl
Sep 14 22:54:33 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: opengl
Sep 14 22:54:33 Shiroko compiz.desktop[18998]: Compiz (opengl) - Info: GLX_EXT_buffer_age is supported
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: decor
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: decor
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: resize
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: resize
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: place
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: place
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: move
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: move
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: compiztoolbox
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: compiztoolbox
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: staticswitcher
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: staticswitcher
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: regex
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: regex
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: animation
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: animation
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: wall
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: wall
Sep 14 22:54:34 Shiroko gnome-session-binary[18921]: Entering running state
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Stopping plugin: wall
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: Couldn't find a perfect decorator match; trying all decorators
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: Starting gtk-window-decorator
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Stopping plugin: animation
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Stopping plugin: regex
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Stopping plugin: staticswitcher
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Stopping plugin: compiztoolbox
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Stopping plugin: move
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Stopping plugin: place
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Stopping plugin: resize
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Stopping plugin: decor
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Stopping plugin: opengl
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: crashhandler
Sep 14 22:54:34 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.freedesktop.Tracker1' unit='tracker-store.service' requested by ':1.17' (uid=1000 pid=19033 comm="gdbus call -e -d org.freedesktop.DBus -o /org/free")
Sep 14 22:54:34 Shiroko gnome-fallback-mount-helper-pantheon.desktop[19030]: AUTOMOUNT: session is active: 0 -> 1
Sep 14 22:54:34 Shiroko gnome-fallback-media-keys-helper-pantheon.desktop[19032]: [/etc/pulse/client.conf:26] Unknown lvalue ': autospawn' in section 'n/a'.
Sep 14 22:54:34 Shiroko systemd[18831]: Starting Tracker metadata database store and lookup manager...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 51.
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: crashhandler
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: opengl
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: Compiz (opengl) - Info: GLX_EXT_buffer_age is supported
Sep 14 22:54:34 Shiroko polkitd[18976]: Registered Authentication Agent for unix-session:1 (system bus name :1.41 [/usr/lib/policykit-1-pantheon/io.elementary.pantheon-agent-polkit], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Sep 14 22:54:34 Shiroko polkitd[18976]: Unregistered Authentication Agent for unix-session:1 (system bus name :1.41, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: compiztoolbox
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: decor
Sep 14 22:54:34 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.gnome.zeitgeist.Engine' unit='zeitgeist.service' requested by ':1.21' (uid=1000 pid=19037 comm="zeitgeist-datahub")
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: firepaint
Sep 14 22:54:34 Shiroko polkitd[18976]: Registered Authentication Agent for unix-session:1 (system bus name :1.42 [/usr/lib/policykit-1-pantheon/io.elementary.pantheon-agent-polkit], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Sep 14 22:54:34 Shiroko gnome-session[18921]: gnome-session-binary[18921]: WARNING: App 'io.elementary.pantheon-agent-polkit-daemon.desktop' respawning too quickly
Sep 14 22:54:34 Shiroko gnome-session-binary[18921]: WARNING: App 'io.elementary.pantheon-agent-polkit-daemon.desktop' respawning too quickly
Sep 14 22:54:34 Shiroko gnome-session[18921]: gnome-session-binary[18921]: WARNING: Error on restarting session managed app: Component 'io.elementary.pantheon-agent-polkit-daemon.desktop' crashing too quickly
Sep 14 22:54:34 Shiroko gnome-session-binary[18921]: WARNING: Error on restarting session managed app: Component 'io.elementary.pantheon-agent-polkit-daemon.desktop' crashing too quickly
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: firepaint
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: gnomecompat
Sep 14 22:54:34 Shiroko systemd[18831]: Starting Zeitgeist activity log service...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 66.
Sep 14 22:54:34 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.gtk.vfs.Daemon' unit='gvfs-daemon.service' requested by ':1.18' (uid=1000 pid=19030 comm="/usr/lib/gnome-settings-daemon/gnome-fallback-moun")
Sep 14 22:54:34 Shiroko systemd[18831]: Starting Virtual filesystem service...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 81.
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: gnomecompat
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: grid
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: grid
Sep 14 22:54:34 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: imgjpeg
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: imgjpeg
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: imgpng
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: imgpng
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: mousepoll
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: mousepoll
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: move
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: neg
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: neg
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: obs
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: obs
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: place
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: regex
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: resize
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: staticswitcher
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: text
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: text
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: thumbnail
Sep 14 22:54:35 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gtk.vfs.Daemon'
Sep 14 22:54:35 Shiroko systemd[18831]: Started Virtual filesystem service.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 81.
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: thumbnail
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: wallpaper
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: wallpaper
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (wallpaper) - Warn: Malformed option
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (wallpaper) - Warn: Malformed option
Sep 14 22:54:35 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: winrules
Sep 14 22:54:35 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.gnome.zeitgeist.SimpleIndexer' unit='zeitgeist-fts.service' requested by ':1.23' (uid=1000 pid=19074 comm="/usr/bin/zeitgeist-daemon")
Sep 14 22:54:35 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gnome.zeitgeist.Engine'
Sep 14 22:54:35 Shiroko zeitgeist-datah[19101]: zeitgeist-datahub.vala:224: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
Sep 14 22:54:35 Shiroko systemd[18831]: Started Zeitgeist activity log service.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 66.
Sep 14 22:54:35 Shiroko systemd[18831]: Starting Zeitgeist full-text search indexer...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 96.
Sep 14 22:54:36 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.gtk.vfs.UDisks2VolumeMonitor' unit='gvfs-udisks2-volume-monitor.service' requested by ':1.18' (uid=1000 pid=19030 comm="/usr/lib/gnome-settings-daemon/gnome-fallback-moun")
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: winrules
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: workspacenames
Sep 14 22:54:36 Shiroko systemd[18831]: Starting Virtual filesystem service - disk device monitor...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 111.
Sep 14 22:54:36 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.freedesktop.Tracker1'
Sep 14 22:54:36 Shiroko systemd[18831]: Started Tracker metadata database store and lookup manager.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 51.
Sep 14 22:54:36 Shiroko tracker-store.desktop[19033]: (uint32 1,)
Sep 14 22:54:36 Shiroko kernel: fuse init (API version 7.28)
Sep 14 22:54:36 Shiroko systemd[1]: Mounting FUSE Control File System...
-- Subject: A start job for unit sys-fs-fuse-connections.mount has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit sys-fs-fuse-connections.mount has begun execution.
-- 
-- The job identifier is 817.
Sep 14 22:54:36 Shiroko systemd[1]: Mounted FUSE Control File System.
-- Subject: A start job for unit sys-fs-fuse-connections.mount has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit sys-fs-fuse-connections.mount has finished successfully.
-- 
-- The job identifier is 817.
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: workspacenames
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: commands
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: commands
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: cube
Sep 14 22:54:36 Shiroko fcitx-autostart.desktop[19040]: Fcitx seems is not running
Sep 14 22:54:36 Shiroko gtk-window-deco[19041]: Failed to load metacity theme 'Adwaita-dark': Failed to find a valid file for theme 'Adwaita-dark'
Sep 14 22:54:36 Shiroko gnome-fallback-[19032]: Grab failed for some keys, another application may already have access the them.
Sep 14 22:54:36 Shiroko dbus-daemon[634]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service' requested by ':1.39' (uid=1000 pid=19032 comm="/usr/lib/gnome-settings-daemon/gnome-fallback-medi")
Sep 14 22:54:36 Shiroko dbus-daemon[634]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service' requested by ':1.44' (uid=1000 pid=19125 comm="/usr/lib/gvfs-udisks2-volume-monitor")
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: cube
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: rotate
Sep 14 22:54:36 Shiroko systemd[1]: Starting Disk Manager...
-- Subject: A start job for unit udisks2.service has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit udisks2.service has begun execution.
-- 
-- The job identifier is 889.
Sep 14 22:54:36 Shiroko systemd[1]: Starting Daemon for power management...
-- Subject: A start job for unit upower.service has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit upower.service has begun execution.
-- 
-- The job identifier is 820.
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: rotate
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: cubeaddon
Sep 14 22:54:36 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: cubeaddon
Sep 14 22:54:36 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gnome.zeitgeist.SimpleIndexer'
Sep 14 22:54:36 Shiroko systemd[18831]: Started Zeitgeist full-text search indexer.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 96.
Sep 14 22:54:37 Shiroko nvidia-oc.desktop[19036]: ERROR: Error assigning value 250 to attribute 'GPUGraphicsClockOffset' (Shiroko:0[gpu:0]) as specified in assignment '[gpu:0]/GPUGraphicsClockOffset[1]=250' (Unknown Error).
Sep 14 22:54:37 Shiroko nvidia-oc.desktop[19036]: ERROR: Error assigning value 250 to attribute 'GPUMemoryTransferRateOffset' (Shiroko:0[gpu:0]) as specified in assignment '[gpu:0]/GPUMemoryTransferRateOffset[1]=250' (Unknown Error).
Sep 14 22:54:37 Shiroko nvidia-hacks.desktop[19027]:   Attribute 'InitialPixmapPlacement' (Shiroko:0.0) assigned value 2.
Sep 14 22:54:37 Shiroko compiz.desktop[18998]: compiz (core) - Info: Loading plugin: expo
Sep 14 22:54:37 Shiroko compiz.desktop[18998]: compiz (core) - Info: Starting plugin: expo
Sep 14 22:54:37 Shiroko compiz.desktop[18998]: compiz (core) - Info: Unloading plugin: wall
Sep 14 22:54:37 Shiroko compiz.desktop[18998]: compiz (core) - Info: Unloading plugin: animation
Sep 14 22:54:37 Shiroko udisksd[19146]: udisks daemon version 2.8.4 starting
Sep 14 22:54:37 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating service name='ca.desrt.dconf' requested by ':1.26' (uid=1000 pid=19050 comm="plank")
Sep 14 22:54:37 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'ca.desrt.dconf'
Sep 14 22:54:37 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-kimpanel-ui.conf
Sep 14 22:54:37 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.ayatana.bamf' unit='bamfdaemon.service' requested by ':1.26' (uid=1000 pid=19050 comm="plank")
Sep 14 22:54:37 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-notificationitem.conf
Sep 14 22:54:37 Shiroko systemd[18831]: Starting BAMF Application Matcher Framework...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 126.
Sep 14 22:54:37 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-cloudpinyin.conf
Sep 14 22:54:37 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-clipboard.conf
Sep 14 22:54:37 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Sep 14 22:54:37 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: Unable to load library icui18n "Cannot load library icui18n: (icui18n: cannot open shared object file: No such file or directory)"
Sep 14 22:54:37 Shiroko mono[19039]: Failed to load module "pantheon-filechooser-module"
Sep 14 22:54:37 Shiroko mono[19039]: Failed to load module "pantheon-filechooser-module"
Sep 14 22:54:37 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-classic-ui.conf
Sep 14 22:54:37 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-pinyin.conf
Sep 14 22:54:37 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-punc.conf
Sep 14 22:54:37 Shiroko dbus-daemon[634]: [system] Successfully activated service 'org.freedesktop.UPower'
Sep 14 22:54:37 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 14 22:54:37 Shiroko systemd[1]: Started Daemon for power management.
-- Subject: A start job for unit upower.service has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit upower.service has finished successfully.
-- 
-- The job identifier is 820.
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-sogoupinyin.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-xkb.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-dbus.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-fullwidth-char.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-freedesktop-notify.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-xkbdbus.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-table.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-unicode.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-fullwidth-char-enhance.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-keyboard.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-sogoucloudpinyin.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-ipcportal.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-punc-ng.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-qw.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-ipc.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-x11.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-autoeng.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-imselector.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-vk.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-pinyin-enhance.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-mozc.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-chttrans.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-remote-module.conf
Sep 14 22:54:38 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.gnome.evolution.dataserver.Sources5' unit='evolution-source-registry.service' requested by ':1.24' (uid=1000 pid=19043 comm="wingpanel")
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-quickphrase.conf
Sep 14 22:54:38 Shiroko systemd[18831]: Starting Evolution source registry...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 141.
Sep 14 22:54:38 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:38] [NOTICE] [geekdns-doh-north] OK (DoH) - rtt: 130ms
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-spell.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-xim.conf
Sep 14 22:54:38 Shiroko fcitx-autostart.desktop[19040]: (INFO-19145 addon.c:151) Load Addon Config File:fcitx-autoeng-ng.conf
Sep 14 22:54:39 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:39] [NOTICE] [gridns-jp] OK (DoH) - rtt: 42ms
Sep 14 22:54:39 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:39] [NOTICE] [gridns-sg] OK (DoH) - rtt: 102ms
Sep 14 22:54:39 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating service name='org.gnome.OnlineAccounts' requested by ':1.38' (uid=1000 pid=19201 comm="/usr/lib/evolution-source-registry")
Sep 14 22:54:40 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:40] [NOTICE] [ibksturm] OK (crypto v2) - rtt: 383ms
Sep 14 22:54:40 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating service name='org.gnome.GConf' requested by ':1.39' (uid=1000 pid=19039 comm="mono /usr/lib/glippy/glippy.exe")
Sep 14 22:54:40 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gnome.GConf'
Sep 14 22:54:40 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:40] [NOTICE] [jp.tiar.app] OK (crypto v2) - rtt: 42ms
Sep 14 22:54:40 Shiroko dbus-daemon[634]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Sep 14 22:54:40 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 14 22:54:40 Shiroko systemd[1]: Started Disk Manager.
-- Subject: A start job for unit udisks2.service has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit udisks2.service has finished successfully.
-- 
-- The job identifier is 889.
Sep 14 22:54:40 Shiroko udisksd[19146]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Sep 14 22:54:40 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gtk.vfs.UDisks2VolumeMonitor'
Sep 14 22:54:40 Shiroko systemd[18831]: Started Virtual filesystem service - disk device monitor.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 111.
Sep 14 22:54:40 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:40] [NOTICE] [jp.tiar.app-doh] OK (DoH) - rtt: 43ms
Sep 14 22:54:40 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:40] [NOTICE] [opennic-ethservices] OK (crypto v1) - rtt: 290ms
Sep 14 22:54:41 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:41] [NOTICE] [opennic-ethservices2] OK (crypto v1) - rtt: 290ms
Sep 14 22:54:41 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:41] [NOTICE] [opennic-luggs] OK (crypto v1) - rtt: 207ms
Sep 14 22:54:41 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gnome.evolution.dataserver.Sources5'
Sep 14 22:54:41 Shiroko systemd[18831]: Started Evolution source registry.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 141.
Sep 14 22:54:41 Shiroko goa-daemon[19218]: goa-daemon version 3.32.0 starting
Sep 14 22:54:41 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating service name='org.gnome.Identity' requested by ':1.43' (uid=1000 pid=19218 comm="/usr/lib/goa-daemon")
Sep 14 22:54:41 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gnome.OnlineAccounts'
Sep 14 22:54:41 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:41] [NOTICE] [opennic-luggs2] OK (crypto v1) - rtt: 205ms
Sep 14 22:54:41 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.freedesktop.Notifications' unit='dunst.service' requested by ':1.37' (uid=1000 pid=19145 comm="fcitx")
Sep 14 22:54:41 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gnome.Identity'
Sep 14 22:54:41 Shiroko systemd[18831]: Starting Dunst notification daemon...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 156.
Sep 14 22:54:41 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.ayatana.bamf'
Sep 14 22:54:41 Shiroko systemd[18831]: Started BAMF Application Matcher Framework.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 126.
Sep 14 22:54:41 Shiroko dunst[19239]: Warning: 'allow_markup' is deprecated, please use 'markup' instead.
Sep 14 22:54:41 Shiroko dunst[19239]: Warning: The frame section is deprecated, width has been renamed to frame_width and moved to the global section.
Sep 14 22:54:41 Shiroko dunst[19239]: Warning: The frame section is deprecated, color has been renamed to frame_color and moved to the global section.
Sep 14 22:54:41 Shiroko dunst[19239]: Warning: Unknown keyboard shortcut: mod4+esc
Sep 14 22:54:41 Shiroko dunst[19239]: Warning: Unknown keyboard shortcut: mod4+shift+esc
Sep 14 22:54:41 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.freedesktop.Notifications'
Sep 14 22:54:41 Shiroko systemd[18831]: Started Dunst notification daemon.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 156.
Sep 14 22:54:42 Shiroko indicator-cpufreq.desktop[19035]: /usr/lib/python2.7/site-packages/indicator_cpufreq/indicator.py:20: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
Sep 14 22:54:42 Shiroko indicator-cpufreq.desktop[19035]:   from gi.repository import Gtk
Sep 14 22:54:42 Shiroko indicator-cpufreq.desktop[19035]: /usr/lib/python2.7/site-packages/indicator_cpufreq/indicator.py:21: PyGIWarning: AppIndicator3 was imported without specifying a version first. Use gi.require_version('AppIndicator3', '0.1') before import to ensure that the right version gets loaded.
Sep 14 22:54:42 Shiroko indicator-cpufreq.desktop[19035]:   from gi.repository import AppIndicator3 as appindicator
Sep 14 22:54:42 Shiroko glippy.desktop[19039]: [Exception:System.Xml.XmlException:Glippy.Application.History] Root element is missing.
Sep 14 22:54:43 Shiroko fcitx-autostart.desktop[19040]: (ERROR-19145 ime.c:432) fcitx-keyboard-in-kan-kagapa already exists
Sep 14 22:54:43 Shiroko fcitx-autostart.desktop[19040]: (ERROR-19145 ime.c:432) fcitx-keyboard-in-tel-kagapa already exists
Sep 14 22:54:43 Shiroko fcitx-autostart.desktop[19040]: (ERROR-19145 ime.c:432) fcitx-keyboard-cm-mmuock already exists
Sep 14 22:54:44 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:44] [NOTICE] [powerdns-doh] OK (DoH) - rtt: 287ms
Sep 14 22:54:44 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:44] [NOTICE] [publicarray-au] OK (crypto v2) - rtt: 148ms
Sep 14 22:54:44 Shiroko sogou-qimpanel[19031]: Failed to load module "pantheon-filechooser-module"
Sep 14 22:54:44 Shiroko sogou-qimpanel[19031]: Failed to load module "pantheon-filechooser-module"
Sep 14 22:54:44 Shiroko compiz.desktop[18998]: compiz (decor) - Warn: No default decoration found, placement will not be correct
Sep 14 22:54:44 Shiroko compiz.desktop[18998]: compiz (decor) - Warn: No default decoration found, placement will not be correct
Sep 14 22:54:44 Shiroko compiz.desktop[18998]: compiz (decor) - Warn: No default decoration found, placement will not be correct
Sep 14 22:54:44 Shiroko compiz.desktop[18998]: compiz (decor) - Warn: No default decoration found, placement will not be correct
Sep 14 22:54:44 Shiroko compiz.desktop[18998]: compiz (decor) - Warn: No default decoration found, placement will not be correct
Sep 14 22:54:44 Shiroko compiz.desktop[18998]: compiz (decor) - Warn: No default decoration found, placement will not be correct
Sep 14 22:54:44 Shiroko compiz.desktop[18998]: compiz (opengl) - Error: Timed out waiting for sync object.
Sep 14 22:54:45 Shiroko dbus-daemon[634]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service' requested by ':1.47' (uid=1000 pid=19043 comm="wingpanel")
Sep 14 22:54:45 Shiroko systemd[1]: Reached target User and Group Name Lookups.
-- Subject: A start job for unit nss-user-lookup.target has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit nss-user-lookup.target has finished successfully.
-- 
-- The job identifier is 1027.
Sep 14 22:54:45 Shiroko systemd[1]: Starting Accounts Service...
-- Subject: A start job for unit accounts-daemon.service has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit accounts-daemon.service has begun execution.
-- 
-- The job identifier is 958.
Sep 14 22:54:45 Shiroko accounts-daemon[19267]: started daemon version 0.6.55
Sep 14 22:54:45 Shiroko dbus-daemon[634]: [system] Successfully activated service 'org.freedesktop.Accounts'
Sep 14 22:54:45 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 14 22:54:45 Shiroko systemd[1]: Started Accounts Service.
-- Subject: A start job for unit accounts-daemon.service has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit accounts-daemon.service has finished successfully.
-- 
-- The job identifier is 958.
Sep 14 22:54:45 Shiroko io.elementary.cerbere.desktop[19021]: [/etc/pulse/client.conf:26] Unknown lvalue ': autospawn' in section 'n/a'.
Sep 14 22:54:45 Shiroko io.elementary.cerbere.desktop[19021]: [/etc/pulse/client.conf:26] Unknown lvalue ': autospawn' in section 'n/a'.
Sep 14 22:54:45 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: No such file or directory: No such file or directory
Sep 14 22:54:45 Shiroko io.elementary.cerbere.desktop[19021]: home dir: /home/zombie
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: No such file or directory: No such file or directory
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: No such file or directory: No such file or directory
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: No such file or directory: No such file or directory
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: No such file or directory: No such file or directory
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: No such file or directory: No such file or directory
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: No such file or directory: No such file or directory
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: No such file or directory: No such file or directory
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: gnome-shell:0
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: mutter:0
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: ukwm:0
Sep 14 22:54:46 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: marco:0
Sep 14 22:54:47 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: Could not parse application stylesheet
Sep 14 22:54:48 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: (WARN-19266 fcitx-config.c:922) Invalid Entry: line 12 missing '='
Sep 14 22:54:51 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:51] [NOTICE] [publicarray-au2] TIMEOUT
Sep 14 22:54:56 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:56] [NOTICE] [quad101] OK (DoH) - rtt: 68ms
Sep 14 22:54:57 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:57] [NOTICE] [quad9-dnscrypt-ip4-nofilter-pri] OK (crypto v1) - rtt: 106ms
Sep 14 22:54:57 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:54:57] [NOTICE] [quad9-dnscrypt-ip4-nofilter-alt] OK (crypto v1) - rtt: 101ms
Sep 14 22:54:57 Shiroko wingpanel[19043]: json_node_get_object: assertion 'JSON_NODE_IS_VALID (node)' failed
Sep 14 22:54:57 Shiroko io.elementary.cerbere.desktop[19021]: Location : lat : 0, lon : 0
Sep 14 22:54:57 Shiroko io.elementary.cerbere.desktop[19021]: Location : City: (null)
Sep 14 22:54:57 Shiroko wingpanel[19043]: json_object_get_double_member: assertion 'object != NULL' failed
Sep 14 22:54:57 Shiroko wingpanel[19043]: json_object_get_double_member: assertion 'object != NULL' failed
Sep 14 22:54:57 Shiroko wingpanel[19043]: json_object_get_string_member: assertion 'object != NULL' failed
Sep 14 22:54:58 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: No such file or directory: No such file or directory
Sep 14 22:54:58 Shiroko fcitx-ui-sogou-qimpanel.desktop[19031]: No systemtrayicon available
Sep 14 22:55:06 Shiroko tracker-store[19060]: OK
Sep 14 22:55:06 Shiroko systemd[18831]: tracker-store.service: Succeeded.
-- Subject: Unit succeeded
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- The unit UNIT has successfully entered the 'dead' state.
Sep 14 22:55:07 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:55:07] [NOTICE] [qualityology.com] OK (crypto v2) - rtt: 170ms
Sep 14 22:55:07 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:55:07] [NOTICE] [scaleway-fr] OK (crypto v2) - rtt: 261ms
Sep 14 22:55:07 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:55:07] [NOTICE] [securedns] OK (crypto v1) - rtt: 304ms
Sep 14 22:55:08 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.gtk.vfs.Metadata' unit='gvfs-metadata.service' requested by ':1.54' (uid=1000 pid=19386 comm="/usr/lib/WebKitNetworkProcess 4 18")
Sep 14 22:55:08 Shiroko systemd[18831]: Starting Virtual filesystem metadata service...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 171.
Sep 14 22:55:08 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gtk.vfs.Metadata'
Sep 14 22:55:08 Shiroko systemd[18831]: Started Virtual filesystem metadata service.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 171.
Sep 14 22:55:08 Shiroko io.elementary.cerbere.desktop[19021]: current : Mostly Cloudy
Sep 14 22:55:08 Shiroko compiz.desktop[18998]: compiz (decor) - Warn: No default decoration found, placement will not be correct
Sep 14 22:55:08 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.gnome.evolution.dataserver.Calendar7' unit='evolution-calendar-factory.service' requested by ':1.24' (uid=1000 pid=19043 comm="wingpanel")
Sep 14 22:55:08 Shiroko systemd[18831]: Starting Evolution calendar service...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 186.
Sep 14 22:55:09 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gnome.evolution.dataserver.Calendar7'
Sep 14 22:55:09 Shiroko systemd[18831]: Started Evolution calendar service.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 186.
Sep 14 22:55:09 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating via systemd: service name='org.gnome.evolution.dataserver.AddressBook9' unit='evolution-addressbook-factory.service' requested by ':1.59' (uid=1000 pid=19579 comm="/usr/lib/evolution-calendar-factory")
Sep 14 22:55:09 Shiroko systemd[18831]: Starting Evolution address book service...
-- Subject: A start job for unit UNIT has begun execution
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has begun execution.
-- 
-- The job identifier is 201.
Sep 14 22:55:09 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:55:09] [NOTICE] [securedns-doh] OK (DoH) - rtt: 295ms
Sep 14 22:55:09 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:55:09] [NOTICE] [soltysiak] OK (crypto v1) - rtt: 308ms
Sep 14 22:55:09 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'org.gnome.evolution.dataserver.AddressBook9'
Sep 14 22:55:09 Shiroko systemd[18831]: Started Evolution address book service.
-- Subject: A start job for unit UNIT has finished successfully
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- A start job for unit UNIT has finished successfully.
-- 
-- The job identifier is 201.
Sep 14 22:55:10 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:55:10] [NOTICE] [suami] OK (crypto v2) - rtt: 266ms
Sep 14 22:55:10 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:55:10] [NOTICE] [ventricle.us] OK (crypto v2) - rtt: 186ms
Sep 14 22:55:10 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Activating service name='com.canonical.indicator.application' requested by ':1.24' (uid=1000 pid=19043 comm="wingpanel")
Sep 14 22:55:10 Shiroko wingpanel[19043]: DBusService.vala:64: Service registration suceeded
Sep 14 22:55:10 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:55:10] [NOTICE] [opennic-R4SAS] OK (crypto v2) - rtt: 296ms
Sep 14 22:55:10 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:55:10] [NOTICE] Server with the lowest initial latency: cloudflare (rtt: 40ms)
Sep 14 22:55:10 Shiroko dnscrypt-proxy[633]: [2019-09-14 22:55:10] [NOTICE] dnscrypt-proxy is ready - live servers: 82
Sep 14 22:55:10 Shiroko dbus-daemon[18936]: [session uid=1000 pid=18936] Successfully activated service 'com.canonical.indicator.application'
Sep 14 22:55:11 Shiroko wingpanel[19043]: g_object_set_data: assertion 'G_IS_OBJECT (object)' failed
Sep 14 22:55:11 Shiroko wingpanel[19043]: g_object_set_data: assertion 'G_IS_OBJECT (object)' failed
Sep 14 22:55:11 Shiroko wingpanel[19043]: g_object_set_data: assertion 'G_IS_OBJECT (object)' failed
Sep 14 22:55:11 Shiroko wingpanel[19043]: g_object_set_data: assertion 'G_IS_OBJECT (object)' failed
Sep 14 22:55:11 Shiroko wingpanel[19043]: g_object_set_data: assertion 'G_IS_OBJECT (object)' failed
Sep 14 22:55:11 Shiroko wingpanel[19043]: desktop-file-service.vala:458: Key file contains line “--nosaveoptions %f” which is not a key-value pair, group, or comment
Sep 14 22:55:11 Shiroko wingpanel[19043]: desktop-file-service.vala:117: Dawati is not understood
Sep 14 22:55:34 Shiroko io.elementary.t[19838]: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkNotebook

~/.local/share/xorg/Xorg.0.log:

[    49.494] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    49.494] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[    49.494] Build Operating System: Linux Arch Linux
[    49.494] Current Operating System: Linux Shiroko 5.0.3-1-ck #1 SMP PREEMPT Fri Mar 22 01:17:15 JST 2019 x86_64
[    49.494] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-ck.img root=PARTUUID=0b60bb47-7bfa-4743-a9ab-4911f1cec7f3 rootfstype=ext4 rootflags=rw,nodiratime,relatime,journal_checksum,journal_async_commit,commit=60,max_batch_time=30000,stripe=128,data=writeback,inode_readahead_blks=64 resume=PARTUUID=0b60bb47-7bfa-4743-a9ab-4911f1cec7f3 resume_offset=2164736 add_efi_memmap rw quiet loglevel=3 rd.systemd.show_status=auto rd.udev.log_priority=3 nvidia-drm.modeset=1 video=DVI-D-0:1920x1080MR@60D vt.global_cursor_default=0 fsck.repair=preen
[    49.495] Build Date: 30 June 2019  09:52:01AM
[    49.495]  
[    49.495] Current version of pixman: 0.38.4
[    49.495] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    49.495] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    49.495] (==) Log file: "/home/zombie/.local/share/xorg/Xorg.0.log", Time: Sat Sep 14 22:54:15 2019
[    49.632] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    49.632] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    50.496] (==) ServerLayout "Layout0"
[    50.496] (**) |-->Screen "Mirror" (0)
[    50.496] (**) |   |-->Monitor "<default monitor>"
[    50.496] (**) |   |-->Device "Nvidia GPU"
[    50.496] (==) No monitor specified for screen "Mirror".
	Using a default monitor configuration.
[    50.496] (**) Option "BlankTime" "0"
[    50.496] (**) Option "StandbyTime" "0"
[    50.496] (**) Option "SuspendTime" "0"
[    50.496] (**) Option "OffTime" "0"
[    50.496] (**) Option "Xinerama" "0"
[    50.496] (==) Automatically adding devices
[    50.496] (==) Automatically enabling devices
[    50.496] (==) Automatically adding GPU devices
[    50.496] (==) Automatically binding GPU devices
[    50.496] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    50.805] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    50.805] (==) ModulePath set to "/usr/lib/xorg/modules"
[    50.805] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    50.805] (II) Module ABI versions:
[    50.805] 	X.Org ANSI C Emulation: 0.4
[    50.805] 	X.Org Video Driver: 24.0
[    50.805] 	X.Org XInput driver : 24.1
[    50.805] 	X.Org Server Extension : 10.0
[    50.805] (++) using VT number 1

[    50.808] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    50.810] (II) xfree86: Adding drm device (/dev/dri/card0)
[    50.810] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[    50.811] (II) xfree86: Adding drm device (/dev/dri/card1)
[    50.811] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[    50.815] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    50.815] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[    50.817] (--) PCI: (0@0:2:0) 8086:0122:1849:0122 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    50.818] (--) PCI:*(1@0:0:0) 10de:1284:1043:8461 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    50.818] (--) PCI: (10@0:0:0) 4444:0016:10fc:d01e rev 1, Mem @ 0xec000000/67108864
[    50.818] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    50.818] (II) LoadModule: "glx"
[    51.068] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    51.295] (II) Module glx: vendor="X.Org Foundation"
[    51.295] 	compiled for 1.20.5, module version = 1.0.0
[    51.295] 	ABI class: X.Org Server Extension, version 10.0
[    51.295] (II) LoadModule: "nvidia"
[    51.295] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    51.376] (II) Module nvidia: vendor="NVIDIA Corporation"
[    51.376] 	compiled for 1.6.99.901, module version = 1.0.0
[    51.376] 	Module class: X.Org Video Driver
[    51.376] (II) NVIDIA dlloader X Driver  435.21  Sun Aug 25 08:17:08 CDT 2019
[    51.376] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    51.376] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    51.376] (II) systemd-logind: releasing fd for 226:0
[    51.467] (II) Loading sub module "fb"
[    51.467] (II) LoadModule: "fb"
[    51.468] (II) Loading /usr/lib/xorg/modules/libfb.so
[    51.547] (II) Module fb: vendor="X.Org Foundation"
[    51.547] 	compiled for 1.20.5, module version = 1.0.0
[    51.547] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    51.547] (II) Loading sub module "wfb"
[    51.547] (II) LoadModule: "wfb"
[    51.565] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    51.592] (II) Module wfb: vendor="X.Org Foundation"
[    51.592] 	compiled for 1.20.5, module version = 1.0.0
[    51.592] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    51.592] (II) Loading sub module "ramdac"
[    51.592] (II) LoadModule: "ramdac"
[    51.592] (II) Module "ramdac" already built-in
[    51.592] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    51.592] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    51.592] (==) NVIDIA(0): RGB weight 888
[    51.592] (==) NVIDIA(0): Default visual is TrueColor
[    51.592] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    51.592] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    51.592] (**) NVIDIA(0): Option "Stereo" "0"
[    51.592] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-0"
[    51.592] (**) NVIDIA(0): Option "SLI" "Off"
[    51.592] (**) NVIDIA(0): Option "MultiGPU" "Off"
[    51.592] (**) NVIDIA(0): Option "BaseMosaic" "off"
[    51.592] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    51.592] (**) NVIDIA(0): Stereo disabled by request
[    51.592] (**) NVIDIA(0): NVIDIA SLI disabled.
[    51.592] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[    51.592] (**) NVIDIA(0): Option "Coolbits" "24"
[    51.592] (**) NVIDIA(0): Option "MetaModes" "HDMI-0: 1920x1080_60i +0+0 {viewportin=1920x1080, viewportout=1820x1026+50+28, ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}, DVI-D-0: 1920x1080_60 +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
[    51.592] (**) NVIDIA(0): Enabling 2D acceleration
[    51.592] (II) Loading sub module "glxserver_nvidia"
[    51.592] (II) LoadModule: "glxserver_nvidia"
[    51.592] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    51.960] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    51.960] 	compiled for 1.6.99.901, module version = 1.0.0
[    51.960] 	Module class: X.Org Server Extension
[    51.960] (II) NVIDIA GLX Module  435.21  Sun Aug 25 08:14:27 CDT 2019
[    51.960] (II) NVIDIA: The X server does not support PRIME Render Offload.
[    51.962] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    51.962] (--) NVIDIA(0):     CRT-0
[    51.962] (--) NVIDIA(0):     DFP-0 (boot)
[    51.962] (--) NVIDIA(0):     DFP-1
[    51.964] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630 (GK208) at PCI:1:0:0 (GPU-0)
[    51.964] (--) NVIDIA(0): Memory: 2097152 kBytes
[    51.964] (--) NVIDIA(0): VideoBIOS: 80.28.3e.00.05
[    51.964] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[    51.965] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    51.965] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    51.965] (--) NVIDIA(GPU-0): 
[    51.980] (--) NVIDIA(GPU-0): Mitsubishi RDT234WLM (DFP-0): connected
[    51.980] (--) NVIDIA(GPU-0): Mitsubishi RDT234WLM (DFP-0): Internal TMDS
[    51.980] (--) NVIDIA(GPU-0): Mitsubishi RDT234WLM (DFP-0): 330.0 MHz maximum pixel clock
[    51.980] (--) NVIDIA(GPU-0): 
[    52.009] (--) NVIDIA(GPU-0): ORN ORION (DFP-1): connected
[    52.009] (--) NVIDIA(GPU-0): ORN ORION (DFP-1): Internal TMDS
[    52.009] (--) NVIDIA(GPU-0): ORN ORION (DFP-1): 340.0 MHz maximum pixel clock
[    52.009] (--) NVIDIA(GPU-0): 
[    52.016] (II) NVIDIA(0): Validated MetaModes:
[    52.016] (II) NVIDIA(0):    
[    52.016] (II) NVIDIA(0):     "HDMI-0:1920x1080_60i+0+0{viewportin=1920x1080,viewportout=1820x1026+50+28,ForceCompositionPipeline=On,ForceFullCompositionPipeline=On},DVI-D-0:1920x1080_60+0+0{ForceCompositionPipeline=On,ForceFullCompositionPipeline=On}"
[    52.016] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    52.020] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[    52.020] (--) NVIDIA(0):     option
[    52.021] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[    52.021] (II) NVIDIA:     access.
[    52.023] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    52.023] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    52.023] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    52.023] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    52.023] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    52.023] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    52.023] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    52.023] (II) NVIDIA(0):     Config Options in the README.
[    52.046] (II) NVIDIA(0): Setting mode "HDMI-0:1920x1080_60i+0+0{viewportin=1920x1080,viewportout=1820x1026+50+28,ForceCompositionPipeline=On,ForceFullCompositionPipeline=On},DVI-D-0:1920x1080_60+0+0{ForceCompositionPipeline=On,ForceFullCompositionPipeline=On}"
[    52.196] (==) NVIDIA(0): Disabling shared memory pixmaps
[    52.196] (==) NVIDIA(0): Backing store enabled
[    52.196] (==) NVIDIA(0): Silken mouse disabled
[    52.196] (==) NVIDIA(0): DPMS enabled
[    52.196] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    52.196] (II) Loading sub module "dri2"
[    52.196] (II) LoadModule: "dri2"
[    52.196] (II) Module "dri2" already built-in
[    52.196] (II) NVIDIA(0): [DRI2] Setup complete
[    52.196] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    52.196] (II) Initializing extension Generic Event Extension
[    52.196] (II) Initializing extension SHAPE
[    52.196] (II) Initializing extension MIT-SHM
[    52.196] (II) Initializing extension XInputExtension
[    52.196] (II) Initializing extension XTEST
[    52.196] (II) Initializing extension BIG-REQUESTS
[    52.196] (II) Initializing extension SYNC
[    52.196] (II) Initializing extension XKEYBOARD
[    52.196] (II) Initializing extension XC-MISC
[    52.196] (II) Initializing extension SECURITY
[    52.196] (II) Initializing extension XFIXES
[    52.196] (II) Initializing extension RENDER
[    52.196] (II) Initializing extension RANDR
[    52.196] (II) Initializing extension COMPOSITE
[    52.196] (II) Initializing extension DAMAGE
[    52.196] (II) Initializing extension MIT-SCREEN-SAVER
[    52.196] (II) Initializing extension DOUBLE-BUFFER
[    52.196] (II) Initializing extension RECORD
[    52.196] (II) Initializing extension DPMS
[    52.196] (II) Initializing extension Present
[    52.196] (II) Initializing extension DRI3
[    52.196] (II) Initializing extension X-Resource
[    52.196] (II) Initializing extension XVideo
[    52.196] (II) Initializing extension XVideo-MotionCompensation
[    52.196] (II) Initializing extension GLX
[    52.196] (II) Initializing extension GLX
[    52.196] (II) Indirect GLX disabled.
[    52.196] (II) GLX: Another vendor is already registered for screen 0
[    52.197] (II) Initializing extension XFree86-VidModeExtension
[    52.197] (II) Initializing extension XFree86-DGA
[    52.197] (II) Initializing extension XFree86-DRI
[    52.197] (II) Initializing extension DRI2
[    52.197] (II) Initializing extension NV-GLX
[    52.197] (II) Initializing extension NV-CONTROL
[    52.197] (II) Initializing extension XINERAMA
[    53.653] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    53.653] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    53.653] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    53.653] (II) LoadModule: "libinput"
[    53.653] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    53.796] (II) Module libinput: vendor="X.Org Foundation"
[    53.796] 	compiled for 1.20.5, module version = 0.29.0
[    53.796] 	Module class: X.Org XInput Driver
[    53.796] 	ABI class: X.Org XInput driver, version 24.1
[    53.796] (II) Using input driver 'libinput' for 'Power Button'
[    53.797] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0
[    53.797] (**) Power Button: always reports core events
[    53.797] (**) Option "Device" "/dev/input/event1"
[    53.797] (**) Option "_source" "server/udev"
[    54.290] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    54.290] (II) event1  - Power Button: device is a keyboard
[    54.290] (II) event1  - Power Button: device removed
[    54.290] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    54.290] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    54.291] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    54.291] (II) event1  - Power Button: device is a keyboard
[    54.292] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[    54.292] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    54.292] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    54.292] (II) Using input driver 'libinput' for 'Video Bus'
[    54.293] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 32 paused 0
[    54.294] (**) Video Bus: always reports core events
[    54.294] (**) Option "Device" "/dev/input/event2"
[    54.294] (**) Option "_source" "server/udev"
[    54.295] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[    54.295] (II) event2  - Video Bus: device is a keyboard
[    54.295] (II) event2  - Video Bus: device removed
[    54.295] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[    54.295] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    54.296] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[    54.296] (II) event2  - Video Bus: device is a keyboard
[    54.296] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    54.296] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    54.296] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    54.296] (II) Using input driver 'libinput' for 'Power Button'
[    54.297] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 33 paused 0
[    54.297] (**) Power Button: always reports core events
[    54.297] (**) Option "Device" "/dev/input/event0"
[    54.297] (**) Option "_source" "server/udev"
[    54.298] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    54.298] (II) event0  - Power Button: device is a keyboard
[    54.299] (II) event0  - Power Button: device removed
[    54.299] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    54.299] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    54.300] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    54.300] (II) event0  - Power Button: device is a keyboard
[    54.302] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[    54.302] (II) No input driver specified, ignoring this device.
[    54.302] (II) This device may have been added with another device file.
[    54.303] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[    54.303] (II) No input driver specified, ignoring this device.
[    54.303] (II) This device may have been added with another device file.
[    54.304] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[    54.304] (II) No input driver specified, ignoring this device.
[    54.304] (II) This device may have been added with another device file.
[    54.304] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[    54.304] (II) No input driver specified, ignoring this device.
[    54.304] (II) This device may have been added with another device file.
[    54.304] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[    54.304] (II) No input driver specified, ignoring this device.
[    54.304] (II) This device may have been added with another device file.
[    54.305] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[    54.305] (II) No input driver specified, ignoring this device.
[    54.305] (II) This device may have been added with another device file.
[    54.305] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[    54.305] (II) No input driver specified, ignoring this device.
[    54.305] (II) This device may have been added with another device file.
[    54.306] (II) config/udev: Adding input device Wacom Co.,Ltd. Intuos PS (/dev/input/event3)
[    54.306] (**) Wacom Co.,Ltd. Intuos PS: Applying InputClass "evdev pointer catchall"
[    54.306] (**) Wacom Co.,Ltd. Intuos PS: Applying InputClass "evdev tablet catchall"
[    54.306] (**) Wacom Co.,Ltd. Intuos PS: Applying InputClass "libinput pointer catchall"
[    54.306] (**) Wacom Co.,Ltd. Intuos PS: Applying InputClass "libinput tablet catchall"
[    54.306] (**) Wacom Co.,Ltd. Intuos PS: Applying InputClass "Wacom USB tablet class"
[    54.306] (**) Wacom Co.,Ltd. Intuos PS: Applying InputClass "Wacom tablet class"
[    54.306] (II) LoadModule: "wacom"
[    54.306] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    54.335] (II) Module wacom: vendor="X.Org Foundation"
[    54.335] 	compiled for 1.20.5, module version = 0.37.0
[    54.335] 	Module class: X.Org XInput Driver
[    54.335] 	ABI class: X.Org XInput driver, version 24.1
[    54.335] (II) Build version: 0.37.0
[    54.335] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
	Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
	Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
	Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
	CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
	CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
	Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
	PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
	DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452, DTH2452,
	Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18,
	Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3,
	PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5,
	Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19,
	Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13,
	Intuos4 12x19, Intuos4 WL USB Endpoint,
	Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
	Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
	Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
	Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
	Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, Cintiq 27QHDT,
	Cintiq 27QHDT, Mobilestudio Pro 13, MobileStudio Pro 16,
	MobileStudio Pro 13, MobileStudio Pro 16, Cintiq 13 FHD Pro,
	Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq 13 FHD Pro,
	Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq Pro 24,
	TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A,
	CapPlus  0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5,
	TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF,
	TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116,
	TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000,
	TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026,
	usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031,
	usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035,
	usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039,
	usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054,
	usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058,
	usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503,
	usb:1b96:0001, usb:17ef:6004
[    54.336] (II) Using input driver 'wacom' for 'Wacom Co.,Ltd. Intuos PS'
[    54.881] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 34 paused 0
[    54.881] (**) Wacom Co.,Ltd. Intuos PS: always reports core events
[    54.881] (**) Option "Device" "/dev/input/event3"
[    54.881] (EE) Wacom Co.,Ltd. Intuos PS: Invalid type 'stylus' for this device.
[    54.881] (EE) Wacom Co.,Ltd. Intuos PS: Invalid type 'eraser' for this device.
[    54.881] (EE) Wacom Co.,Ltd. Intuos PS: Invalid type 'cursor' for this device.
[    54.881] (EE) Wacom Co.,Ltd. Intuos PS: Invalid type 'touch' for this device.
[    54.881] (EE) Wacom Co.,Ltd. Intuos PS: Invalid type 'pad' for this device.
[    54.881] (EE) Wacom Co.,Ltd. Intuos PS: No type specified
[    54.881] (EE) PreInit returned 8 for "Wacom Co.,Ltd. Intuos PS"
[    54.881] (II) UnloadModule: "wacom"
[    54.881] (II) systemd-logind: releasing fd for 13:67
[    54.905] (II) config/udev: Adding input device Wacom Co.,Ltd. Intuos PS (/dev/input/mouse0)
[    54.905] (II) No input driver specified, ignoring this device.
[    54.905] (II) This device may have been added with another device file.
[    54.906] (II) config/udev: Adding input device Logitech K270 (/dev/input/event5)
[    54.906] (**) Logitech K270: Applying InputClass "evdev keyboard catchall"
[    54.906] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    54.906] (II) Using input driver 'libinput' for 'Logitech K270'
[    54.907] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 34 paused 0
[    54.907] (**) Logitech K270: always reports core events
[    54.907] (**) Option "Device" "/dev/input/event5"
[    54.907] (**) Option "_source" "server/udev"
[    54.910] (II) event5  - Logitech K270: is tagged by udev as: Keyboard
[    54.910] (II) event5  - Logitech K270: device is a keyboard
[    54.910] (II) event5  - Logitech K270: device removed
[    54.910] (II) libinput: Logitech K270: needs a virtual subdevice
[    54.910] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:4003.0008/input/input9/event5"
[    54.910] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 9)
[    54.911] (**) Option "AccelerationScheme" "none"
[    54.911] (**) Logitech K270: (accel) selected scheme none/0
[    54.911] (**) Logitech K270: (accel) acceleration factor: 2.000
[    54.911] (**) Logitech K270: (accel) acceleration threshold: 4
[    54.913] (II) event5  - Logitech K270: is tagged by udev as: Keyboard
[    54.913] (II) event5  - Logitech K270: device is a keyboard
[    54.914] (II) config/udev: Adding input device Logitech K270 (/dev/input/event6)
[    54.914] (**) Logitech K270: Applying InputClass "evdev keyboard catchall"
[    54.914] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    54.914] (II) Using input driver 'libinput' for 'Logitech K270'
[    54.915] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 35 paused 0
[    54.915] (**) Logitech K270: always reports core events
[    54.915] (**) Option "Device" "/dev/input/event6"
[    54.915] (**) Option "_source" "server/udev"
[    54.917] (II) event6  - Logitech K270: is tagged by udev as: Keyboard
[    54.917] (II) event6  - Logitech K270: device is a keyboard
[    54.918] (II) event6  - Logitech K270: device removed
[    54.918] (II) libinput: Logitech K270: needs a virtual subdevice
[    54.918] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:4003.0009/input/input10/event6"
[    54.918] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 10)
[    54.918] (**) Option "AccelerationScheme" "none"
[    54.918] (**) Logitech K270: (accel) selected scheme none/0
[    54.918] (**) Logitech K270: (accel) acceleration factor: 2.000
[    54.918] (**) Logitech K270: (accel) acceleration threshold: 4
[    54.920] (II) event6  - Logitech K270: is tagged by udev as: Keyboard
[    54.920] (II) event6  - Logitech K270: device is a keyboard
[    54.921] (II) config/udev: Adding input device Logitech M325 (/dev/input/event4)
[    54.921] (**) Logitech M325: Applying InputClass "evdev pointer catchall"
[    54.921] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[    54.921] (II) Using input driver 'libinput' for 'Logitech M325'
[    54.922] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
[    54.922] (**) Logitech M325: always reports core events
[    54.922] (**) Option "Device" "/dev/input/event4"
[    54.922] (**) Option "_source" "server/udev"
[    54.924] (II) event4  - Logitech M325: is tagged by udev as: Mouse
[    54.924] (II) event4  - Logitech M325: device set to 600 DPI
[    54.924] (II) event4  - Logitech M325: device is a pointer
[    54.924] (II) event4  - Logitech M325: device removed
[    54.924] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:400A.0007/input/input8/event4"
[    54.924] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 11)
[    54.924] (**) Option "AccelerationScheme" "none"
[    54.924] (**) Logitech M325: (accel) selected scheme none/0
[    54.924] (**) Logitech M325: (accel) acceleration factor: 2.000
[    54.924] (**) Logitech M325: (accel) acceleration threshold: 4
[    54.926] (II) event4  - Logitech M325: is tagged by udev as: Mouse
[    54.926] (II) event4  - Logitech M325: device set to 600 DPI
[    54.927] (II) event4  - Logitech M325: device is a pointer
[    54.927] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse1)
[    54.927] (II) No input driver specified, ignoring this device.
[    54.927] (II) This device may have been added with another device file.
[    54.928] (II) config/udev: Adding input device Logitech M545/M546 (/dev/input/event7)
[    54.928] (**) Logitech M545/M546: Applying InputClass "evdev pointer catchall"
[    54.928] (**) Logitech M545/M546: Applying InputClass "libinput pointer catchall"
[    54.928] (II) Using input driver 'libinput' for 'Logitech M545/M546'
[    54.929] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 37 paused 0
[    54.929] (**) Logitech M545/M546: always reports core events
[    54.929] (**) Option "Device" "/dev/input/event7"
[    54.929] (**) Option "_source" "server/udev"
[    54.931] (II) event7  - Logitech M545/M546: is tagged by udev as: Mouse
[    54.932] (II) event7  - Logitech M545/M546: device is a pointer
[    54.932] (II) event7  - Logitech M545/M546: device removed
[    54.932] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:4052.000A/input/input11/event7"
[    54.932] (II) XINPUT: Adding extended input device "Logitech M545/M546" (type: MOUSE, id 12)
[    54.932] (**) Option "AccelerationScheme" "none"
[    54.932] (**) Logitech M545/M546: (accel) selected scheme none/0
[    54.932] (**) Logitech M545/M546: (accel) acceleration factor: 2.000
[    54.932] (**) Logitech M545/M546: (accel) acceleration threshold: 4
[    54.934] (II) event7  - Logitech M545/M546: is tagged by udev as: Mouse
[    54.934] (II) event7  - Logitech M545/M546: device is a pointer
[    54.935] (II) config/udev: Adding input device Logitech M545/M546 (/dev/input/mouse2)
[    54.935] (II) No input driver specified, ignoring this device.
[    54.935] (II) This device may have been added with another device file.
[    54.941] (**) Logitech K270: Applying InputClass "evdev keyboard catchall"
[    54.941] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    54.941] (II) Using input driver 'libinput' for 'Logitech K270'
[    54.941] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[    54.941] (**) Logitech K270: always reports core events
[    54.941] (**) Option "Device" "/dev/input/event5"
[    54.941] (**) Option "_source" "_driver/libinput"
[    54.941] (II) libinput: Logitech K270: is a virtual subdevice
[    54.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:4003.0008/input/input9/event5"
[    54.941] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 13)
[    54.941] (**) Logitech K270: Applying InputClass "evdev keyboard catchall"
[    54.941] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    54.941] (II) Using input driver 'libinput' for 'Logitech K270'
[    54.941] (II) systemd-logind: returning pre-existing fd for /dev/input/event6 13:70
[    54.941] (**) Logitech K270: always reports core events
[    54.941] (**) Option "Device" "/dev/input/event6"
[    54.941] (**) Option "_source" "_driver/libinput"
[    54.941] (II) libinput: Logitech K270: is a virtual subdevice
[    54.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0006/0003:046D:4003.0009/input/input10/event6"
[    54.941] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 14)
[    66.758] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    66.759] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    66.759] (--) NVIDIA(GPU-0): 
[    66.774] (--) NVIDIA(GPU-0): Mitsubishi RDT234WLM (DFP-0): connected
[    66.774] (--) NVIDIA(GPU-0): Mitsubishi RDT234WLM (DFP-0): Internal TMDS
[    66.774] (--) NVIDIA(GPU-0): Mitsubishi RDT234WLM (DFP-0): 330.0 MHz maximum pixel clock
[    66.774] (--) NVIDIA(GPU-0): 
[    66.803] (--) NVIDIA(GPU-0): ORN ORION (DFP-1): connected
[    66.803] (--) NVIDIA(GPU-0): ORN ORION (DFP-1): Internal TMDS
[    66.803] (--) NVIDIA(GPU-0): ORN ORION (DFP-1): 340.0 MHz maximum pixel clock
[    66.803] (--) NVIDIA(GPU-0):

Offline

#15 2019-09-14 19:16:53

seth
Member
Registered: 2012-09-03
Posts: 49,969

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

[    50.810] (II) xfree86: Adding drm device (/dev/dri/card0)
[    50.810] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[    50.811] (II) xfree86: Adding drm device (/dev/dri/card1)
[    50.811] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[    50.815] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    50.815] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[    50.817] (--) PCI: (0@0:2:0) 8086:0122:1849:0122 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    50.818] (--) PCI:*(1@0:0:0) 10de:1284:1043:8461 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    50.818] (--) PCI: (10@0:0:0) 4444:0016:10fc:d01e rev 1, Mem @ 0xec000000/67108864

What kind of system is that?

lspci

Assuming some optimus device, and in general, post the config files you wrote to produce

[    50.496] (==) ServerLayout "Layout0"
[    50.496] (**) |-->Screen "Mirror" (0)
[    50.496] (**) |   |-->Monitor "<default monitor>"
[    50.496] (**) |   |-->Device "Nvidia GPU"

There are two outputs wired to "NVIDIA(GPU-0)" but apparently to nothing else.
Are those all outputs you have?

https://unix.stackexchange.com/question … ole-output

Online

#16 2019-09-15 06:56:23

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 813
Website

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

seth wrote:

What kind of system is that?

Custom assembled desktop; lspci:

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 Display controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset LPC Controller (rev 05)
00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GK208 [GeForce GT 630 Rev. 2] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller (rev a1)
03:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12)
04:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
05:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
06:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:04.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:06.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:08.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
08:00.0 Multimedia controller: Altera Corporation Device 4c15 (rev 01)
09:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 01)
0a:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) Video Decoder (rev 01)
0c:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetLink BCM57781 Gigabit Ethernet PCIe (rev 10)
seth wrote:

optimus

No, although there is a secondary GPU in the Core i7, it is disabled; nvidia's in a pcie slot.

seth wrote:

post the config files

I have two monitors, one is actually an overscanned big-screen TV (HDMI); rather than a wider desktop, I opted to mirror them (only use the TV for home theatre, and the monitor as daily driver).

/etc/X11/xorg.conf.d/20-nvidia.conf:

Section "Device"
    Identifier     "Nvidia GPU"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GK208 [GeForce GT 630 Rev. 2] (rev a1)"
    Option         "CoolBits" "24"
    #Option         "HWCursor" "off"
    #Option         "SWCursor" "on"
EndSection

/etc/X11/xorg.conf.d/30-screen-mirror.conf:

Section "Screen"
    Identifier     "Mirror"
    Device         "Nvidia GPU"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "HDMI-0: 1920x1080_60i +0+0 {viewportin=1920x1080, viewportout=1820x1026+50+28, ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}, DVI-D-0: 1920x1080_60 +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

/etc/X11/xorg.conf.d/99-serverlayout.conf:

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Mirror" 0 0
    Option         "Xinerama" "0"
    Option         "BlankTime" "0"
    Option         "StandbyTime" "0"
    Option         "SuspendTime" "0"
    Option         "OffTime" "0"
EndSection
seth wrote:

There are two outputs wired to "NVIDIA(GPU-0)" but apparently to nothing else.
Are those all outputs you have?

There are three outputs on the nvidia card, a dual DVI, an HDMI, and a CRT. The CRT is not connected; the HDMI is hooked up, but the display was turned off at the time; the DVI is the default display.

I'll be back with results. I'm going to try setting fbcon=map:1 (is fbcon generic, or should i replace that with a more specific driver?) and configure vfio-pci for the nvidia card (in modprobe.conf.d).

EDIT: With fbcon=map:1, fsck output is (sometimes) additionally hidden; pci-stub.ids=10de:1284 prevented me from logging in somehow (no console output to know what went wrong); vfio-pci had no noticeable effect (couldn't find it with lsmod or dmesg either).

Last edited by quequotion (2019-09-15 07:41:59)

Offline

#17 2019-09-15 11:44:56

seth
Member
Registered: 2012-09-03
Posts: 49,969

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

The intel chip isn't deactivated according to any log you provided.
Can you please try to hook one output onto it and see what happens?

Online

#18 2019-09-16 14:55:01

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 813
Website

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

seth wrote:

The intel chip isn't deactivated according to any log you provided.
Can you please try to hook one output onto it and see what happens?

That probably would have worked, but your suggestion gave me another idea: blacklist i915, which worked* and was (arguably) less risky than reaching into my cable hive.

What I meant by "disabled" earlier was that I believed the internal GPU to be disabled by BIOS (UEFI), but looking back at the setting, this is rather just to set the "default GPU" (to PCIe, for the nvidia card). The kernel goes ahead and loads i915, ignores BIOS' GPU preference, and apparently directs the console output to the internal GPU--even though nothing is attached to it.

*In order to disable i915, I also had to blacklist snd-hda-intel, which in turn shut off my Realtek sound card, leaving me devoid of audio. This is not a viable solution (if I must choose, blind login is preferable to no audio). What I need is a means to force console output to go to the nvidia card, despite that snd-hda-intel (and therefore i915) will be loaded, or a way to disable i915 without blacklisting snd-hda-intel**.

**EDIT: Use kernel parameter module_blacklist=i915 to disable IGPU without blacklisting snd-hda-intel. It would be nice to know how to do it the other way (force the linux console to appear on nvidia despite an intel gpu being available), nonetheless marking as solved.

Thanks!

Last edited by quequotion (2019-09-16 16:02:22)

Offline

#19 2019-09-16 15:36:31

seth
Member
Registered: 2012-09-03
Posts: 49,969

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

Let's see whether we've the nvidia framebuffer somewhere:

cat /proc/fb

What you could do at hand is to load snd-hda-intel explicitly later on (once X11 takes over)?

Online

#20 2019-09-16 15:56:50

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 813
Website

Re: [SOLVED] How to see invisible login prompt on tty1? rootless x, nvidia

seth wrote:
cat /proc/fb
0 EFI VGA

I think that (EFI) means efifb, which is what I expect (to be in use). As far as I have read (and I've spent a lot of time banging my head on framebuffers, long before having the reason at hand); nvidia's framebuffer (VGA?) doesn't have its own console support, but UEFI systems can use efifb, which should output to the nvidia card (although it apparently prefers to output to an i915 card).

seth wrote:

What you could do at hand is to load snd-hda-intel explicitly later on (once X11 takes over)?

Found a way around this, but the situation makes my head hurt. Seems like there should be a way of allowing both modules to load and telling the kernel which to use for the console (ie, specify to vgaarb?), but extensive googling has yielded no such results.

Last edited by quequotion (2019-09-17 04:13:54)

Offline

Board footer

Powered by FluxBB