(libvirt) Attaching input devices back to arch, end up semi functional

cpoul · 2019-09-21 09:48:47

Hello,

I took the big step to completely remove my 10-year osx system for arch. My current needs are heavily based in use of a Windows VM, therefore I set up a VM with GPU pass through following the excellent guide from the wiki. The whole system, both host and guest, are pretty stable except one issue. I asked already in VFIO reddit but I haven't got any answer yet, thus I copy-paste my issue from reddit to here.

Maybe it's an arch/linux specific issue, being one month user I don't have the right judgement to decide where to post it, if my post is out of topic feel free to remove it.

---

I followed this guide to swap keyboard & mouse to Win10 guest. Tweaked it a bit to use win10 built in ssh instead of putty and to use ssh keys for authentication. Swapping works fine but when I'm back to host (Arch Linux), keyboard's F keys (F1-F12) don't work, neither mouse's side buttons (forward, back) and middle click. They'll work again IF I plug out/in their corresponding usb cords. I have a spare mouse & keyboard to use exclusively with the host, but I'd like to use my daily drivers for intensive work, as they're excellent devices.

Is there any method where I can "reset" or "plug them out/in" virtually via cli? Or at least, some tips to debug it. My last choice, would be to buy a USB PCI Controller and a KVM switch and pass through the whole controller to VM. My motherboard's controllers group all external usb devices under the same Bus.

My scripts are:

mouse.xml

<hostdev mode='subsystem' type='usb' managed='no'>
  <source>
    <vendor id='0x046d'/>
    <product id='0xc52b'/>
  </source>
</hostdev>

keyboard.xml

<hostdev mode='subsystem' type='usb' managed='no'>
<source>
<vendor id='0x046d'/>
<product id='0xc33a'/>
</source>
</hostdev>

input_attach.sh

#!/bin/bash

virsh attach-device win10 ~/.VFIOinput/mouse.xml
virsh attach-device win10 ~/.VFIOinput/keyboard.xml
notify-send 'Devices attached'

input_detach.sh

#!/bin/bash

virsh detach-device win10 ~/.VFIOinput/mouse.xml
virsh detach-device win10 ~/.VFIOinput/keyboard.xml 
notify-send 'Devices detached'

win10.xml

https://pastebin.com/iyhZAQYa

Swiggles · 2019-09-21 11:43:56

A simple unbind and bind should do the trick most likely:

device=`realpath /sys/bus/usb/devices/<dev>`
driver=`realpath $device/driver`
echo ${device##*/} > $driver/unbind
echo ${device##*/} > $driver/bind

There is also the authorized node which may or may not work when toggling it.

Could you please add dmesg and journal output so we can get the whole picture and maybe figure out what really goes wrong?

Last edited by Swiggles (2019-09-21 11:45:18)

cpoul · 2019-09-21 12:17:48

[edit] for the record, my keyboard is Logitech G413 and my mouse Logitech 2s. I have Solaar installed, which controls some of mouse's functionality

Sure. Both outputs are from a fresh reboot. The steps which I followed are:

1. Opened VM
2. Attached kb&mouse to it
3. Dettached from VM back to host

Strangely, for the first time ever, F1-F12 keys and mouse buttons worked. I swapped them again and the issue came back. So I unplugged their usb cords and replugged them.

Here is the output up to this steps

dmesg

[    0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
[    0.000000] Linux version 5.3.0-arch1-1-ARCH (builduser@heftig-1042915) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Mon Sep 16 03:29:01 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/vg00-lvolroot rw loglevel=3 quiet root=/dev/vg00/lvolroot intel_iommu=on
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a5e08fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a5e09000-0x00000000a5e0ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a5e10000-0x00000000a68bcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a68bd000-0x00000000a6db5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6db6000-0x00000000bcc23fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bcc24000-0x00000000bccb5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bccb6000-0x00000000bcd1dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bcd1e000-0x00000000bce60fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bce61000-0x00000000bef47fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bef48000-0x00000000beffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xbce26000  ACPI=0xbce26000  SMBIOS=0xf04c0  MPS=0xfd460 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z97-HD3/Z97-HD3, BIOS F10c 03/03/2016
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3600.202 MHz processor
[    0.001121] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001123] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001127] last_pfn = 0x83f000 max_arch_pfn = 0x400000000
[    0.001130] MTRR default type: uncachable
[    0.001130] MTRR fixed ranges enabled:
[    0.001131]   00000-9FFFF write-back
[    0.001132]   A0000-BFFFF uncachable
[    0.001132]   C0000-CFFFF write-protect
[    0.001133]   D0000-DFFFF uncachable
[    0.001133]   E0000-FFFFF write-protect
[    0.001134] MTRR variable ranges enabled:
[    0.001135]   0 base 0000000000 mask 7800000000 write-back
[    0.001135]   1 base 0800000000 mask 7FE0000000 write-back
[    0.001136]   2 base 0820000000 mask 7FF0000000 write-back
[    0.001136]   3 base 0830000000 mask 7FF8000000 write-back
[    0.001137]   4 base 0838000000 mask 7FFC000000 write-back
[    0.001137]   5 base 083C000000 mask 7FFE000000 write-back
[    0.001138]   6 base 083E000000 mask 7FFF000000 write-back
[    0.001138]   7 base 00C0000000 mask 7FC0000000 uncachable
[    0.001139]   8 disabled
[    0.001139]   9 disabled
[    0.001376] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001508] total RAM covered: 32752M
[    0.001686] Found optimal setting for mtrr clean up
[    0.001687]  gran_size: 64K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 0G
[    0.001888] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.001890] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.007220] found SMP MP-table at [mem 0x000fd770-0x000fd77f]
[    0.007234] check: Scanning 1 areas for low memory corruption
[    0.007237] Using GB pages for direct mapping
[    0.007238] BRK [0x641a01000, 0x641a01fff] PGTABLE
[    0.007239] BRK [0x641a02000, 0x641a02fff] PGTABLE
[    0.007240] BRK [0x641a03000, 0x641a03fff] PGTABLE
[    0.007265] BRK [0x641a04000, 0x641a04fff] PGTABLE
[    0.007266] BRK [0x641a05000, 0x641a05fff] PGTABLE
[    0.007377] BRK [0x641a06000, 0x641a06fff] PGTABLE
[    0.007400] BRK [0x641a07000, 0x641a07fff] PGTABLE
[    0.007463] BRK [0x641a08000, 0x641a08fff] PGTABLE
[    0.007497] BRK [0x641a09000, 0x641a09fff] PGTABLE
[    0.007533] BRK [0x641a0a000, 0x641a0afff] PGTABLE
[    0.007593] BRK [0x641a0b000, 0x641a0bfff] PGTABLE
[    0.007621] Secure boot could not be determined
[    0.007622] RAMDISK: [mem 0x35643000-0x36b18fff]
[    0.007626] ACPI: Early table checksum verification disabled
[    0.007628] ACPI: RSDP 0x00000000BCE26000 000024 (v02 ALASKA)
[    0.007630] ACPI: XSDT 0x00000000BCE26080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007634] ACPI: FACP 0x00000000BCE36958 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.007637] ACPI: DSDT 0x00000000BCE261A0 0107B7 (v02 ALASKA A M I    00000088 INTL 20120711)
[    0.007639] ACPI: FACS 0x00000000BCE5F080 000040
[    0.007640] ACPI: APIC 0x00000000BCE36A68 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.007642] ACPI: FPDT 0x00000000BCE36B00 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007643] ACPI: SSDT 0x00000000BCE36B48 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[    0.007645] ACPI: SSDT 0x00000000BCE37738 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.007647] ACPI: SSDT 0x00000000BCE37C78 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.007649] ACPI: MCFG 0x00000000BCE387F0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.007650] ACPI: HPET 0x00000000BCE38830 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.007652] ACPI: SSDT 0x00000000BCE38868 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.007654] ACPI: SSDT 0x00000000BCE38BD8 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.007656] ACPI: BGRT 0x00000000BCE3E738 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.007657] ACPI: DMAR 0x00000000BCE3E770 000070 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.007663] ACPI: Local APIC address 0xfee00000
[    0.007717] No NUMA configuration found
[    0.007718] Faking a node at [mem 0x0000000000000000-0x000000083effffff]
[    0.007720] NODE_DATA(0) allocated [mem 0x83effc000-0x83effffff]
[    0.007745] Zone ranges:
[    0.007745]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007746]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.007747]   Normal   [mem 0x0000000100000000-0x000000083effffff]
[    0.007747]   Device   empty
[    0.007748] Movable zone start for each node
[    0.007748] Early memory node ranges
[    0.007749]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.007749]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.007750]   node   0: [mem 0x0000000000100000-0x00000000a5e08fff]
[    0.007750]   node   0: [mem 0x00000000a5e10000-0x00000000a68bcfff]
[    0.007751]   node   0: [mem 0x00000000a6db6000-0x00000000bcc23fff]
[    0.007751]   node   0: [mem 0x00000000bccb6000-0x00000000bcd1dfff]
[    0.007752]   node   0: [mem 0x00000000befff000-0x00000000beffffff]
[    0.007752]   node   0: [mem 0x0000000100000000-0x000000083effffff]
[    0.007818] Zeroed struct page in unavailable ranges: 14550 pages
[    0.007818] Initmem setup node 0 [mem 0x0000000000001000-0x000000083effffff]
[    0.007819] On node 0 totalpages: 8369962
[    0.007820]   DMA zone: 64 pages used for memmap
[    0.007820]   DMA zone: 25 pages reserved
[    0.007821]   DMA zone: 3997 pages, LIFO batch:0
[    0.007853]   DMA32 zone: 11999 pages used for memmap
[    0.007853]   DMA32 zone: 767885 pages, LIFO batch:63
[    0.014218]   Normal zone: 118720 pages used for memmap
[    0.014220]   Normal zone: 7598080 pages, LIFO batch:63
[    0.073329] ACPI: PM-Timer IO Port: 0x1808
[    0.073331] ACPI: Local APIC address 0xfee00000
[    0.073335] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.073344] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.073345] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.073346] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.073347] ACPI: IRQ0 used by override.
[    0.073348] ACPI: IRQ9 used by override.
[    0.073349] Using ACPI (MADT) for SMP configuration information
[    0.073350] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.073357] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.073372] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.073373] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.073374] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.073374] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.073376] PM: Registered nosave memory: [mem 0xa5e09000-0xa5e0ffff]
[    0.073377] PM: Registered nosave memory: [mem 0xa68bd000-0xa6db5fff]
[    0.073378] PM: Registered nosave memory: [mem 0xbcc24000-0xbccb5fff]
[    0.073379] PM: Registered nosave memory: [mem 0xbcd1e000-0xbce60fff]
[    0.073379] PM: Registered nosave memory: [mem 0xbce61000-0xbef47fff]
[    0.073379] PM: Registered nosave memory: [mem 0xbef48000-0xbeffefff]
[    0.073380] PM: Registered nosave memory: [mem 0xbf000000-0xf7ffffff]
[    0.073381] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.073381] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.073382] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.073382] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.073382] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.073383] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.073383] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.073383] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.073384] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.073384] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.073385] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.073386] [mem 0xbf000000-0xf7ffffff] available for PCI devices
[    0.073387] Booting paravirtualized kernel on bare hardware
[    0.073389] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.139605] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.139761] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.139766] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.139767] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.139782] Built 1 zonelists, mobility grouping on.  Total pages: 8239154
[    0.139782] Policy zone: Normal
[    0.139783] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/vg00-lvolroot rw loglevel=3 quiet root=/dev/vg00/lvolroot intel_iommu=on
[    0.139834] DMAR: IOMMU enabled
[    0.141162] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.141829] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.141880] mem auto-init: stack:byref_all, heap alloc:off, heap free:off
[    0.144580] Calgary: detecting Calgary via BIOS EBDA area
[    0.144581] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.212771] Memory: 32576040K/33479848K available (12291K kernel code, 1321K rwdata, 3952K rodata, 1632K init, 3548K bss, 903808K reserved, 0K cma-reserved)
[    0.212857] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.212864] Kernel/User page tables isolation: enabled
[    0.212874] ftrace: allocating 37806 entries in 148 pages
[    0.222383] rcu: Preemptible hierarchical RCU implementation.
[    0.222383] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.222384] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.222384] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.222385] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.222385] 	Tasks RCU enabled.
[    0.222386] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.222386] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.223413] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.223554] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.223604] random: get_random_bytes called from start_kernel+0x3ce/0x5a9 with crng_init=0
[    0.223618] Console: colour dummy device 80x25
[    0.223622] printk: console [tty0] enabled
[    0.223633] ACPI: Core revision 20190703
[    0.223719] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.223727] APIC: Switch to symmetric I/O mode setup
[    0.223728] DMAR: Host address width 39
[    0.223729] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.223732] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.223733] DMAR: RMRR base: 0x000000bee8b000 end: 0x000000bee99fff
[    0.223734] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed90000 IOMMU 0
[    0.223734] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.223735] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.223735] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.223932] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.223932] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.224305] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.240394] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e5124d2dd, max_idle_ns: 440795271065 ns
[    0.240397] Calibrating delay loop (skipped), value calculated using timer frequency.. 7203.42 BogoMIPS (lpj=12000673)
[    0.240398] pid_max: default: 32768 minimum: 301
[    0.244748] LSM: Security Framework initializing
[    0.244750] Yama: becoming mindful.
[    0.244807] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.244861] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.244957] *** VALIDATE proc ***
[    0.244988] *** VALIDATE cgroup1 ***
[    0.244988] *** VALIDATE cgroup2 ***
[    0.245021] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.245031] process: using mwait in idle threads
[    0.245033] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.245033] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.245035] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.245036] Spectre V2 : Mitigation: Full generic retpoline
[    0.245036] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.245037] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.245037] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.245038] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.245039] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.245041] MDS: Mitigation: Clear CPU buffers
[    0.245156] Freeing SMP alternatives memory: 32K
[    0.246418] TSC deadline timer enabled
[    0.246420] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.263733] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.263745] ... version:                3
[    0.263745] ... bit width:              48
[    0.263745] ... generic registers:      4
[    0.263746] ... value mask:             0000ffffffffffff
[    0.263746] ... max period:             00007fffffffffff
[    0.263746] ... fixed-purpose events:   3
[    0.263747] ... event mask:             000000070000000f
[    0.270409] rcu: Hierarchical SRCU implementation.
[    0.293842] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.300410] smp: Bringing up secondary CPUs ...
[    0.340416] x86: Booting SMP configuration:
[    0.340417] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.460770] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.500405]  #5 #6 #7
[    0.580707] smp: Brought up 1 node, 8 CPUs
[    0.580707] smpboot: Max logical packages: 1
[    0.580707] smpboot: Total of 8 processors activated (57626.36 BogoMIPS)
[    0.582526] devtmpfs: initialized
[    0.582526] x86/mm: Memory block size: 128MB
[    0.586316] PM: Registering ACPI NVS region [mem 0xa5e09000-0xa5e0ffff] (28672 bytes)
[    0.586316] PM: Registering ACPI NVS region [mem 0xbcd1e000-0xbce60fff] (1323008 bytes)
[    0.586316] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.586316] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.586316] pinctrl core: initialized pinctrl subsystem
[    0.586316] PM: RTC time: 11:55:51, date: 2019-09-21
[    0.586316] NET: Registered protocol family 16
[    0.586316] audit: initializing netlink subsys (disabled)
[    0.586316] audit: type=2000 audit(1569066951.359:1): state=initialized audit_enabled=0 res=1
[    0.586316] cpuidle: using governor ladder
[    0.587075] cpuidle: using governor menu
[    0.587090] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.587091] ACPI: bus type PCI registered
[    0.587092] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.587133] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.587135] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.587141] PCI: Using configuration type 1 for base access
[    0.587159] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.590558] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.590558] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.590558] ACPI: Added _OSI(Module Device)
[    0.590558] ACPI: Added _OSI(Processor Device)
[    0.590558] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.590558] ACPI: Added _OSI(Processor Aggregator Device)
[    0.590558] ACPI: Added _OSI(Linux-Dell-Video)
[    0.590558] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.590558] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.603133] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.613868] ACPI: Dynamic OEM Table Load:
[    0.613868] ACPI: SSDT 0xFFFF9E3C9A8E8400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.614483] ACPI: Dynamic OEM Table Load:
[    0.614483] ACPI: SSDT 0xFFFF9E3C9AFED000 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.614826] ACPI: Dynamic OEM Table Load:
[    0.614826] ACPI: SSDT 0xFFFF9E3C9A657200 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.615503] ACPI: Interpreter enabled
[    0.615526] ACPI: (supports S0 S3 S4 S5)
[    0.615527] ACPI: Using IOAPIC for interrupt routing
[    0.615549] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.616230] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.616890] ACPI: Power Resource [PG00] (on)
[    0.617291] ACPI: Power Resource [PG01] (on)
[    0.620632] ACPI: Power Resource [PG02] (on)
[    0.627808] ACPI: Power Resource [FN00] (off)
[    0.627863] ACPI: Power Resource [FN01] (off)
[    0.627917] ACPI: Power Resource [FN02] (off)
[    0.627970] ACPI: Power Resource [FN03] (off)
[    0.628023] ACPI: Power Resource [FN04] (off)
[    0.628783] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.628788] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.628944] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.629073] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.629074] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.629558] PCI host bridge to bus 0000:00
[    0.629560] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.629560] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.629561] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.629562] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.629562] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.629563] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.629564] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.629565] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[    0.629566] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.629573] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.629650] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.629680] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.629800] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.629817] pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit]
[    0.629867] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.629931] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.629948] pci 0000:00:16.0: reg 0x10: [mem 0xf7316000-0xf731600f 64bit]
[    0.630000] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.630085] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.630099] pci 0000:00:1b.0: reg 0x10: [mem 0xf7310000-0xf7313fff 64bit]
[    0.630149] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.630214] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.630278] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.630292] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.630293] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.630389] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
[    0.630456] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.630469] pci 0000:00:1c.2: Enabling MPC IRBNCE
[    0.630470] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[    0.630566] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[    0.630633] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.630645] pci 0000:00:1c.3: Enabling MPC IRBNCE
[    0.630646] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[    0.630740] pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
[    0.630806] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.630819] pci 0000:00:1c.4: Enabling MPC IRBNCE
[    0.630820] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[    0.630918] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.631070] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.631083] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.631088] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.631093] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.631098] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.631104] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.631109] pci 0000:00:1f.2: reg 0x24: [mem 0xf7315000-0xf73157ff]
[    0.631137] pci 0000:00:1f.2: PME# supported from D3hot
[    0.631197] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.631211] pci 0000:00:1f.3: reg 0x10: [mem 0xf7314000-0xf73140ff 64bit]
[    0.631227] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.631322] pci 0000:01:00.0: [1002:67df] type 00 class 0x030000
[    0.631338] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.631345] pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.631349] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.631354] pci 0000:01:00.0: reg 0x24: [mem 0xf7200000-0xf723ffff]
[    0.631358] pci 0000:01:00.0: reg 0x30: [mem 0xf7240000-0xf725ffff pref]
[    0.631368] pci 0000:01:00.0: BAR 0: assigned to efifb
[    0.631402] pci 0000:01:00.0: supports D1 D2
[    0.631402] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.631454] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
[    0.631468] pci 0000:01:00.1: reg 0x10: [mem 0xf7260000-0xf7263fff 64bit]
[    0.631520] pci 0000:01:00.1: supports D1 D2
[    0.631572] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.631574] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.631575] pci 0000:00:01.0:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.631577] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.631620] acpiphp: Slot [1] registered
[    0.631623] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.631680] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.631706] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.631731] pci 0000:03:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
[    0.631746] pci 0000:03:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref]
[    0.631837] pci 0000:03:00.0: supports D1 D2
[    0.631837] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.631954] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.631956] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.631958] pci 0000:00:1c.2:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.631961] pci 0000:00:1c.2:   bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
[    0.632014] pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
[    0.632151] pci 0000:04:00.0: supports D1 D2
[    0.632151] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.632214] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[    0.632257] pci_bus 0000:05: extended config space not accessible
[    0.632331] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.632408] pci 0000:06:00.0: [10de:1401] type 00 class 0x030000
[    0.632433] pci 0000:06:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.632444] pci 0000:06:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.632455] pci 0000:06:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.632461] pci 0000:06:00.0: reg 0x24: [io  0xc000-0xc07f]
[    0.632467] pci 0000:06:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.632474] pci 0000:06:00.0: enabling Extended Tags
[    0.632587] pci 0000:06:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:1c.4 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.632643] pci 0000:06:00.1: [10de:0fba] type 00 class 0x040300
[    0.632661] pci 0000:06:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.632701] pci 0000:06:00.1: enabling Extended Tags
[    0.632806] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.632808] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.632810] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.632813] pci 0000:00:1c.4:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.633625] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
[    0.633669] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 *10 11 12 14 15)
[    0.633712] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 *10 11 12 14 15)
[    0.633757] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 10 *11 12 14 15)
[    0.633799] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.633844] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.633886] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 10 *11 12 14 15)
[    0.633927] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.637069] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.637070] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.637073] pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.637074] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.637074] pci 0000:06:00.0: vgaarb: bridge control possible
[    0.637075] vgaarb: loaded
[    0.637163] ACPI: bus type USB registered
[    0.637170] usbcore: registered new interface driver usbfs
[    0.637174] usbcore: registered new interface driver hub
[    0.637190] usbcore: registered new device driver usb
[    0.637202] pps_core: LinuxPPS API ver. 1 registered
[    0.637203] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.637204] PTP clock support registered
[    0.637208] EDAC MC: Ver: 3.0.0
[    0.637262] Registered efivars operations
[    0.673991] PCI: Using ACPI for IRQ routing
[    0.674860] PCI: pci_cache_line_size set to 64 bytes
[    0.674903] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.674903] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.674904] e820: reserve RAM buffer [mem 0xa5e09000-0xa7ffffff]
[    0.674904] e820: reserve RAM buffer [mem 0xa68bd000-0xa7ffffff]
[    0.674905] e820: reserve RAM buffer [mem 0xbcc24000-0xbfffffff]
[    0.674906] e820: reserve RAM buffer [mem 0xbcd1e000-0xbfffffff]
[    0.674906] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.674907] e820: reserve RAM buffer [mem 0x83f000000-0x83fffffff]
[    0.674968] NetLabel: Initializing
[    0.674968] NetLabel:  domain hash size = 128
[    0.674968] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.674978] NetLabel:  unlabeled traffic allowed by default
[    0.674980] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.674980] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.678095] clocksource: Switched to clocksource tsc-early
[    0.684388] VFS: Disk quotas dquot_6.6.0
[    0.684399] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.684415] *** VALIDATE hugetlbfs ***
[    0.684440] pnp: PnP ACPI init
[    0.684546] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.684549] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.684619] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.684621] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.684634] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.684661] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.684663] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.684788] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.684789] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.684790] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.684792] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.684989] pnp 00:05: [dma 0 disabled]
[    0.685015] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.685263] pnp 00:06: [dma 0 disabled]
[    0.685350] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.685385] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.685388] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.685774] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.685775] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.685776] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.685777] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.685778] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.685778] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.685779] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.685780] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.685781] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.685782] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.685782] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.685785] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.685932] pnp: PnP ACPI: found 9 devices
[    0.686665] thermal_sys: Registered thermal governor 'fair_share'
[    0.686666] thermal_sys: Registered thermal governor 'bang_bang'
[    0.686670] thermal_sys: Registered thermal governor 'step_wise'
[    0.686670] thermal_sys: Registered thermal governor 'user_space'
[    0.686670] thermal_sys: Registered thermal governor 'power_allocator'
[    0.691189] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.691210] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.691212] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.691213] pci 0000:00:01.0:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.691215] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.691217] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.691225] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.691226] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.691229] pci 0000:00:1c.2:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.691231] pci 0000:00:1c.2:   bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
[    0.691235] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.691253] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[    0.691260] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.691261] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.691264] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.691266] pci 0000:00:1c.4:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.691270] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.691271] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.691272] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.691273] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.691273] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.691274] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.691275] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.691275] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xfeafffff window]
[    0.691276] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.691277] pci_bus 0000:01: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.691278] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.691278] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.691279] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.691280] pci_bus 0000:03: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
[    0.691280] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.691281] pci_bus 0000:06: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.691282] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.691392] NET: Registered protocol family 2
[    0.691511] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.691539] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.691725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.691821] TCP: Hash tables configured (established 262144 bind 65536)
[    0.691842] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.691893] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.691975] NET: Registered protocol family 1
[    0.691978] NET: Registered protocol family 44
[    0.692155] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.692159] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.692197] pci 0000:06:00.1: D0 power state depends on 0000:06:00.0
[    0.692201] PCI: CLS 64 bytes, default 64
[    0.692230] Trying to unpack rootfs image as initramfs...
[    0.874880] Freeing initrd memory: 21336K
[    0.874903] DMAR: No ATSR found
[    0.874950] DMAR: dmar0: Using Queued invalidation
[    0.875049] pci 0000:00:00.0: Adding to iommu group 0
[    0.875088] pci 0000:00:01.0: Adding to iommu group 1
[    0.875147] pci 0000:00:14.0: Adding to iommu group 2
[    0.875183] pci 0000:00:16.0: Adding to iommu group 3
[    0.875223] pci 0000:00:1b.0: Adding to iommu group 4
[    0.875258] pci 0000:00:1c.0: Adding to iommu group 5
[    0.875300] pci 0000:00:1c.2: Adding to iommu group 6
[    0.875337] pci 0000:00:1c.3: Adding to iommu group 7
[    0.875376] pci 0000:00:1c.4: Adding to iommu group 8
[    0.875420] pci 0000:00:1f.0: Adding to iommu group 9
[    0.875427] pci 0000:00:1f.2: Adding to iommu group 9
[    0.875433] pci 0000:00:1f.3: Adding to iommu group 9
[    0.875441] pci 0000:01:00.0: Adding to iommu group 1
[    0.875445] pci 0000:01:00.1: Adding to iommu group 1
[    0.875482] pci 0000:03:00.0: Adding to iommu group 10
[    0.875523] pci 0000:04:00.0: Adding to iommu group 11
[    0.875573] pci 0000:06:00.0: Adding to iommu group 12
[    0.875587] pci 0000:06:00.1: Adding to iommu group 12
[    0.875589] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.876682] check: Scanning for low memory corruption every 60 seconds
[    0.876923] Initialise system trusted keyrings
[    0.876931] Key type blacklist registered
[    0.876962] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.877753] zbud: loaded
[    0.881442] Key type asymmetric registered
[    0.881443] Asymmetric key parser 'x509' registered
[    0.881449] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.881477] io scheduler mq-deadline registered
[    0.881478] io scheduler kyber registered
[    0.881495] io scheduler bfq registered
[    0.882161] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.882207] efifb: probing for efifb
[    0.882217] efifb: showing boot graphics
[    0.882835] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.882836] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.882836] efifb: scrolling: redraw
[    0.882837] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.882862] fbcon: Deferring console take-over
[    0.882863] fb0: EFI VGA frame buffer device
[    0.882867] intel_idle: MWAIT substates: 0x42120
[    0.882868] intel_idle: v0.4.1 model 0x3C
[    0.883081] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.883134] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.883764] ACPI: Power Button [PWRB]
[    0.883807] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.883812] ACPI: Sleep Button [SLPB]
[    0.883832] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.887116] ACPI: Power Button [PWRF]
[    0.887954] thermal LNXTHERM:00: registered as thermal_zone0
[    0.887955] ACPI: Thermal Zone [TZ00] (28 C)
[    0.888139] thermal LNXTHERM:01: registered as thermal_zone1
[    0.888140] ACPI: Thermal Zone [TZ01] (30 C)
[    0.888296] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.908861] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.909283] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.909284] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.909842] usbcore: registered new interface driver usbserial_generic
[    0.909845] usbserial: USB Serial support registered for generic
[    0.909855] rtc_cmos 00:02: RTC can wake from S4
[    0.909965] rtc_cmos 00:02: registered as rtc0
[    0.909975] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.910002] intel_pstate: Intel P-state driver initializing
[    0.910418] ledtrig-cpu: registered to indicate activity on CPUs
[    0.910979] NET: Registered protocol family 10
[    0.925575] Segment Routing with IPv6
[    0.925587] NET: Registered protocol family 17
[    0.926054] RAS: Correctable Errors collector initialized.
[    0.926077] microcode: sig=0x306c3, pf=0x2, revision=0x27
[    0.926236] microcode: Microcode Update Driver: v2.2.
[    0.926243] sched_clock: Marking stable (926079154, 154647)->(933768918, -7535117)
[    0.926454] registered taskstats version 1
[    0.926460] Loading compiled-in X.509 certificates
[    0.928920] Loaded X.509 cert 'Build time autogenerated kernel key: dc770a63c5239f0874bae0e236c215ccbac37ab4'
[    0.928934] zswap: loaded using pool lzo/zbud
[    0.933253] Key type big_key registered
[    0.933680] PM:   Magic number: 3:653:934
[    0.933814] rtc_cmos 00:02: setting system clock to 2019-09-21T11:55:52 UTC (1569066952)
[    0.934558] Freeing unused decrypted memory: 2040K
[    0.934803] Freeing unused kernel image memory: 1632K
[    0.963776] Write protecting the kernel read-only data: 18432k
[    0.964531] Freeing unused kernel image memory: 2012K
[    0.964624] Freeing unused kernel image memory: 144K
[    0.976985] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.976986] x86/mm: Checking user space page tables
[    0.985863] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.985864] Run /init as init process
[    1.080827] systemd[1]: systemd 243.0-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.097160] systemd[1]: Detected architecture x86-64.
[    1.097162] systemd[1]: Running in initial RAM disk.
[    1.098233] systemd[1]: Initializing machine ID from random generator.
[    1.118703] systemd[1]: Reached target Local File Systems.
[    1.118734] systemd[1]: Reached target Paths.
[    1.118742] systemd[1]: Reached target Slices.
[    1.118749] systemd[1]: Reached target Swap.
[    1.118754] systemd[1]: Reached target Timers.
[    1.118812] systemd[1]: Listening on LVM2 metadata daemon socket.
[    1.126511] VFIO - User Level meta-driver version: 0.3
[    1.132520] vfio-pci 0000:06:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
[    1.147105] vfio_pci: add [10de:1401[ffffffff:ffffffff]] class 0x000000/00000000
[    1.163768] vfio_pci: add [10de:0fba[ffffffff:ffffffff]] class 0x000000/00000000
[    1.284883] audit: type=1130 audit(1569066952.846:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[    1.289013] audit: type=1130 audit(1569066952.850:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[    1.305200] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.305206] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.305440] SCSI subsystem initialized
[    1.306300] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    1.306305] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.306454] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.306455] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.306456] usb usb1: Product: xHCI Host Controller
[    1.306457] usb usb1: Manufacturer: Linux 5.3.0-arch1-1-ARCH xhci-hcd
[    1.306458] usb usb1: SerialNumber: 0000:00:14.0
[    1.306564] hub 1-0:1.0: USB hub found
[    1.306579] hub 1-0:1.0: 14 ports detected
[    1.310004] libata version 3.00 loaded.
[    1.310302] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.310304] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.310306] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.310335] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    1.310335] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.310336] usb usb2: Product: xHCI Host Controller
[    1.310337] usb usb2: Manufacturer: Linux 5.3.0-arch1-1-ARCH xhci-hcd
[    1.310339] usb usb2: SerialNumber: 0000:00:14.0
[    1.310457] hub 2-0:1.0: USB hub found
[    1.310474] hub 2-0:1.0: 6 ports detected
[    1.313352] ahci 0000:00:1f.2: version 3.0
[    1.313520] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl SATA mode
[    1.313523] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    1.341072] scsi host0: ahci
[    1.341224] scsi host1: ahci
[    1.341323] scsi host2: ahci
[    1.341433] scsi host3: ahci
[    1.341504] scsi host4: ahci
[    1.341580] scsi host5: ahci
[    1.341626] ata1: SATA max UDMA/133 abar m2048@0xf7315000 port 0xf7315100 irq 31
[    1.341627] ata2: SATA max UDMA/133 abar m2048@0xf7315000 port 0xf7315180 irq 31
[    1.341628] ata3: DUMMY
[    1.341628] ata4: DUMMY
[    1.341629] ata5: SATA max UDMA/133 abar m2048@0xf7315000 port 0xf7315300 irq 31
[    1.341630] ata6: SATA max UDMA/133 abar m2048@0xf7315000 port 0xf7315380 irq 31
[    1.637095] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    1.653685] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.653700] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.653715] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.653737] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.654519] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.654521] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.654522] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.655345] ata6.00: ATA-8: ST2000DM001-1CH164, CC43, max UDMA/133
[    1.655347] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.655354] ata1.00: supports DRM functions and may not be fully accessible
[    1.655393] ata2.00: supports DRM functions and may not be fully accessible
[    1.655947] ata1.00: NCQ Send/Recv Log not supported
[    1.655949] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[    1.655950] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.656256] ata2.00: NCQ Send/Recv Log not supported
[    1.656257] ata2.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[    1.656258] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.656265] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.656267] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.656268] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.656391] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.656393] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.656395] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.657130] ata6.00: configured for UDMA/133
[    1.657164] ata1.00: supports DRM functions and may not be fully accessible
[    1.657486] ata1.00: NCQ Send/Recv Log not supported
[    1.657491] ata2.00: supports DRM functions and may not be fully accessible
[    1.657853] ata2.00: NCQ Send/Recv Log not supported
[    1.658233] ata1.00: configured for UDMA/133
[    1.658328] ata5.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[    1.658330] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.658423] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[    1.658651] ata2.00: configured for UDMA/133
[    1.658893] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[    1.661006] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.661009] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.661011] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.663089] ata5.00: configured for UDMA/133
[    1.663207] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
[    1.663452] scsi 5:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC43 PQ: 0 ANSI: 5
[    1.671800] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.671802] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.671808] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.671811] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.671813] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[    1.671814] sd 1:0:0:0: [sdb] Write Protect is off
[    1.671815] sd 0:0:0:0: [sda] Write Protect is off
[    1.671817] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.671818] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.671821] sd 4:0:0:0: [sdc] Write Protect is off
[    1.671823] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.671828] sd 5:0:0:0: [sdd] Write Protect is off
[    1.671830] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.671834] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.671842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.671845] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.671852] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.673381]  sda: sda1 sda2 sda3
[    1.673986] sd 0:0:0:0: [sda] supports TCG Opal
[    1.673988] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.676725]  sdb: sdb1
[    1.677366] sd 1:0:0:0: [sdb] supports TCG Opal
[    1.677367] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.695881] random: lvm: uninitialized urandom read (4 bytes read)
[    1.700018] audit: type=1130 audit(1569066953.260:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[    1.708935]  sdc: sdc1
[    1.709350] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.711157]  sdd: sdd1 sdd2 sdd3
[    1.711473] sd 5:0:0:0: [sdd] Attached SCSI disk
[    1.731799] random: lvm: uninitialized urandom read (4 bytes read)
[    1.780313] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
[    1.780316] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.780318] usb 1-3: Product: USB Receiver
[    1.780320] usb 1-3: Manufacturer: Logitech
[    1.788442] hidraw: raw HID events driver (C) Jiri Kosina
[    1.798338] usbcore: registered new interface driver usbhid
[    1.798339] usbhid: USB HID core driver
[    1.799874] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52B.0001/input/input3
[    1.853867] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[    1.854163] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input4
[    1.854210] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input5
[    1.877108] tsc: Refined TSC clocksource calibration: 3599.996 MHz
[    1.877116] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e44fb235b, max_idle_ns: 440795341910 ns
[    1.877148] clocksource: Switched to clocksource tsc
[    1.903782] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[    1.910512] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input6
[    1.910698] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[    1.911114] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[    1.920877] device-mapper: uevent: version 1.0.3
[    1.920919] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    1.921434] random: lvm: uninitialized urandom read (2 bytes read)
[    2.009873] audit: type=1130 audit(1569066953.570:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck-root comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[    2.024823] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[    2.042961] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    2.048325] usb 1-5: New USB device found, idVendor=046d, idProduct=c33a, bcdDevice=14.00
[    2.048327] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.048328] usb 1-5: Product: G413 Carbon Mechanical Gaming Keyboard
[    2.048329] usb 1-5: Manufacturer: Logitech
[    2.048330] usb 1-5: SerialNumber: 037B385E3638
[    2.049131] random: fast init done
[    2.050339] input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C33A.0004/input/input8
[    2.089247] audit: type=1130 audit(1569066953.650:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-pvscan@8:3 comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[    2.098949] audit: type=1130 audit(1569066953.660:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-parse-etc comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[    2.098951] audit: type=1131 audit(1569066953.660:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-parse-etc comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[    2.103808] hid-generic 0003:046D:C33A.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input0
[    2.104569] input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.0005/input/input9
[    2.106200] audit: type=1131 audit(1569066953.666:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[    2.106624] audit: type=1131 audit(1569066953.666:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/init" hostname=? addr=? terminal=? res=success'
[    2.140180] input: Logitech Unifying Device. Wireless PID:4069 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0006/input/input13
[    2.160475] input: Logitech G413 Carbon Mechanical Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.0005/input/input10
[    2.160498] input: Logitech Unifying Device. Wireless PID:4069 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0006/input/input14
[    2.160541] input: Logitech Unifying Device. Wireless PID:4069 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0006/input/input15
[    2.160567] input: Logitech Unifying Device. Wireless PID:4069 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0006/input/input16
[    2.160647] hid-generic 0003:046D:C33A.0005: input,hiddev1,hidraw2: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input1
[    2.160750] hid-generic 0003:046D:4069.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4069] on usb-0000:00:14.0-3/input2:1
[    2.209359] systemd-journald[219]: Received SIGTERM from PID 1 (systemd).
[    2.220847] printk: systemd: 18 output lines suppressed due to ratelimiting
[    2.295876] systemd[1]: systemd 243.0-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.310528] systemd[1]: Detected architecture x86-64.
[    2.311156] systemd[1]: Set hostname to <arch-desktop>.
[    2.402872] systemd[1]: /usr/lib/systemd/system/virtlogd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-sock → /run/libvirt/virtlogd-sock; please update the unit file accordingly.
[    2.403356] systemd[1]: /usr/lib/systemd/system/virtlogd-admin.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-admin-sock → /run/libvirt/virtlogd-admin-sock; please update the unit file accordingly.
[    2.407298] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly.
[    2.407763] systemd[1]: /usr/lib/systemd/system/virtlockd-admin.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock → /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly.
[    2.445096] systemd[1]: lvm2-pvscan@8:3.service: Control process exited, code=killed, status=15/TERM
[    2.445154] systemd[1]: lvm2-pvscan@8:3.service: Failed with result 'signal'.
[    2.445342] systemd[1]: Stopped LVM2 PV scan on device 8:3.
[    2.460119] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    2.469921] Adding 8388604k swap on /dev/sda2.  Priority:-2 extents:1 across:8388604k SSFS
[    2.625485] systemd-journald[352]: Received client request to flush runtime journal.
[    2.824073] urandom_read: 3 callbacks suppressed
[    2.824074] random: lvm: uninitialized urandom read (4 bytes read)
[    2.824230] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190703/utaddress-204)
[    2.824235] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.824238] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-204)
[    2.824241] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.824242] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190703/utaddress-204)
[    2.824245] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-204)
[    2.824248] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.824249] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190703/utaddress-204)
[    2.824252] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-204)
[    2.824255] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.824255] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.841565] random: lvm: uninitialized urandom read (4 bytes read)
[    2.850893] parport_pc 00:06: reported by Plug and Play ACPI
[    2.850960] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[    2.851157] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    2.851158] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.851159] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.851159] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.853127] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    2.853270] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    2.853290] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.884685] input: PC Speaker as /devices/platform/pcspkr/input/input20
[    2.913639] cryptd: max_cpu_qlen set to 1000
[    2.920195] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.921304] Linux agpgart interface v0.103
[    2.922077] libphy: r8169: probed
[    2.922281] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, fc:aa:14:06:0b:0b, XID 2c9, IRQ 33
[    2.922283] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.953593] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    2.953957] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.953958] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[    2.955463] AVX2 version of gcm_enc/dec engaged.
[    2.955464] AES CTR mode by8 optimization enabled
[    2.997564] iTCO_vendor_support: vendor-support=0
[    3.019030] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    3.019715] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.019757] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    3.026480] ppdev: user-space parallel port driver
[    3.037917] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    3.037920] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.037922] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.037923] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    3.037925] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x11/0x0
[    3.037926] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    3.037928] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    3.037929] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    3.037931] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    3.044739] random: crng init done
[    3.057886] input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0006/input/input29
[    3.058051] logitech-hidpp-device 0003:046D:4069.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
[    3.062957] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    3.063010] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    3.063055] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    3.063105] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[    3.063151] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[    3.063196] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[    3.063243] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[    3.063287] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
[    3.079584] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[    3.087305] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    3.091995] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
[    3.092044] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input31
[    3.092088] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input32
[    3.092133] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input33
[    3.092183] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input34
[    3.092229] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input35
[    3.120503] mousedev: PS/2 mouse device common for all mice
[    3.201269] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    3.376146] [drm] amdgpu kernel modesetting enabled.
[    3.376197] CRAT table not found
[    3.376198] Virtual CRAT table created for CPU
[    3.376199] Parsing CRAT table with 1 nodes
[    3.376200] Creating topology SYSFS entries
[    3.376211] Topology: Add CPU node
[    3.376211] Finished initializing topology
[    3.376277] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[    3.376278] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
[    3.376280] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xf7200000 -> 0xf723ffff
[    3.376281] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    3.376282] fb0: switching to amdgpudrmfb from EFI VGA
[    3.376326] amdgpu 0000:01:00.0: vgaarb: deactivate vga console
[    3.376530] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1DA2:0xE366 0xEF).
[    3.376538] [drm] register mmio base: 0xF7200000
[    3.376539] [drm] register mmio size: 262144
[    3.376545] [drm] add ip block number 0 <vi_common>
[    3.376546] [drm] add ip block number 1 <gmc_v8_0>
[    3.376546] [drm] add ip block number 2 <tonga_ih>
[    3.376547] [drm] add ip block number 3 <gfx_v8_0>
[    3.376548] [drm] add ip block number 4 <sdma_v3_0>
[    3.376549] [drm] add ip block number 5 <powerplay>
[    3.376550] [drm] add ip block number 6 <dm>
[    3.376551] [drm] add ip block number 7 <uvd_v6_0>
[    3.376552] [drm] add ip block number 8 <vce_v3_0>
[    3.376729] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[    3.376732] caller pci_map_rom+0x6a/0x17d mapping multiple BARs
[    3.376734] amdgpu 0000:01:00.0: No more image in the PCI ROM
[    3.376750] ATOM BIOS: 113-2E366FU-O53
[    3.376761] [drm] UVD is enabled in VM mode
[    3.376762] [drm] UVD ENC is enabled in VM mode
[    3.376763] [drm] VCE enabled in VM mode
[    3.376788] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    3.379469] amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[    3.379471] amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[    3.379477] [drm] Detected VRAM RAM=4096M, BAR=256M
[    3.379478] [drm] RAM width 256bits GDDR5
[    3.380910] [TTM] Zone  kernel: Available graphics memory: 16440654 KiB
[    3.380911] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    3.380912] [TTM] Initializing pool allocator
[    3.380915] [TTM] Initializing DMA pool allocator
[    3.380948] [drm] amdgpu: 4096M of VRAM memory ready
[    3.380950] [drm] amdgpu: 4096M of GTT memory ready.
[    3.380965] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    3.381564] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
[    3.383277] [drm] Chained IB support enabled!
[    3.387104] amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
[    3.388180] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    3.389452] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    3.444268] [drm] DM_PPLIB: values for Engine clock
[    3.444269] [drm] DM_PPLIB:	 300000
[    3.444270] [drm] DM_PPLIB:	 588000
[    3.444270] [drm] DM_PPLIB:	 952000
[    3.444270] [drm] DM_PPLIB:	 1041000
[    3.444270] [drm] DM_PPLIB:	 1106000
[    3.444271] [drm] DM_PPLIB:	 1168000
[    3.444271] [drm] DM_PPLIB:	 1209000
[    3.444271] [drm] DM_PPLIB:	 1340000
[    3.444272] [drm] DM_PPLIB: Validation clocks:
[    3.444272] [drm] DM_PPLIB:    engine_max_clock: 134000
[    3.444273] [drm] DM_PPLIB:    memory_max_clock: 175000
[    3.444273] [drm] DM_PPLIB:    level           : 8
[    3.444274] [drm] DM_PPLIB: values for Memory clock
[    3.444274] [drm] DM_PPLIB:	 300000
[    3.444274] [drm] DM_PPLIB:	 1000000
[    3.444275] [drm] DM_PPLIB:	 1750000
[    3.444275] [drm] DM_PPLIB: Validation clocks:
[    3.444275] [drm] DM_PPLIB:    engine_max_clock: 134000
[    3.444276] [drm] DM_PPLIB:    memory_max_clock: 175000
[    3.444276] [drm] DM_PPLIB:    level           : 8
[    3.445133] intel_rapl_common: Found RAPL domain package
[    3.445135] intel_rapl_common: Found RAPL domain core
[    3.445136] intel_rapl_common: Found RAPL domain dram
[    3.473809] [drm] Display Core initialized with v3.2.35!
[    3.536482] [drm] SADs count is: -2, don't need to read it
[    3.536492] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.536492] [drm] Driver supports precise vblank timestamp query.
[    3.557932] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[    3.562809] [drm] UVD and UVD ENC initialized successfully.
[    3.673773] [drm] VCE initialized successfully.
[    3.676251] kfd kfd: Allocated 3969056 bytes on gart
[    3.677510] Virtual CRAT table created for GPU
[    3.677511] Parsing CRAT table with 1 nodes
[    3.677515] Creating topology SYSFS entries
[    3.677563] Topology: Add dGPU node [0x67df:0x1002]
[    3.677564] kfd kfd: added device 1002:67df
[    3.679560] [drm] fb mappable at 0xE0830000
[    3.679560] [drm] vram apper at 0xE0000000
[    3.679560] [drm] size 8294400
[    3.679561] [drm] fb depth is 24
[    3.679561] [drm]    pitch is 7680
[    3.679633] fbcon: amdgpudrmfb (fb0) is primary device
[    3.679634] fbcon: Deferring console take-over
[    3.679636] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[    3.707309] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:01:00.0 on minor 0
[    3.734723] r8169 0000:03:00.0 enp3s0: Link is Down
[    4.765032] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.770796] tun: Universal TUN/TAP device driver, 1.6
[    4.771342] virbr1: port 1(virbr1-nic) entered blocking state
[    4.771344] virbr1: port 1(virbr1-nic) entered disabled state
[    4.771388] device virbr1-nic entered promiscuous mode
[    4.853466] amdgpu 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    4.853468] vfio-pci 0000:06:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
[    5.052699] virbr1: port 1(virbr1-nic) entered blocking state
[    5.052701] virbr1: port 1(virbr1-nic) entered listening state
[    5.098413] virbr1: port 1(virbr1-nic) entered disabled state
[    5.141779] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.
[    5.686829] kauditd_printk_skb: 128 callbacks suppressed
[    5.686830] audit: type=1130 audit(1569066957.246:139): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.696091] audit: type=1130 audit(1569066957.256:140): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[    8.373590] audit: type=1006 audit(1569066959.933:141): pid=812 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[    8.388170] audit: type=1130 audit(1569066959.950:142): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.394145] audit: type=1006 audit(1569066959.956:143): pid=814 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[    8.416935] audit: type=1131 audit(1569066959.976:144): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.462847] audit: type=1130 audit(1569066960.023:145): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.644335] audit: type=1130 audit(1569066960.206:146): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.715464] audit: type=1130 audit(1569066960.276:147): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.733482] fuse: init (API version 7.31)
[    9.738655] audit: type=1130 audit(1569066961.300:148): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.881764] logitech-hidpp-device 0003:046D:4069.0006: HID++ 4.5 device connected.
[   10.089779] logitech-hidpp-device 0003:046D:4069.0006: multiplier = 8
[   12.062908] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   12.062919] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   12.112486] audit: type=1130 audit(1569066963.673:149): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.147501] audit: type=1130 audit(1569066963.710:150): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nginx comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.007336] audit: type=1131 audit(1569066965.570:151): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.173368] audit: type=1130 audit(1569066965.733:152): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=valet-dns comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.054399] audit: type=1130 audit(1569066966.616:153): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.967879] audit: type=2502 audit(1569066974.530:154): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 vm-ctx=+65534:+992 img-ctx=+65534:+992 model=dac exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   22.981418] audit: type=1130 audit(1569066974.543:155): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=virtlogd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.996626] virbr1: port 2(vnet0) entered blocking state
[   22.996638] virbr1: port 2(vnet0) entered disabled state
[   22.996684] device vnet0 entered promiscuous mode
[   22.996716] audit: type=1700 audit(1569066974.556:156): dev=vnet0 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   22.996821] virbr1: port 2(vnet0) entered blocking state
[   22.996823] virbr1: port 2(vnet0) entered listening state
[   22.996893] audit: type=2501 audit(1569066974.556:157): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=net reason=open vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 net=52:54:00:11:02:6e path="/dev/net/tun" rdev=0A:C8 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   23.010268] audit: type=2501 audit(1569066974.570:158): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=deny vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=all exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   23.010583] audit: type=2501 audit(1569066974.573:159): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=major category=pty maj=88 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   23.010607] audit: type=2501 audit(1569066974.573:160): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/null" rdev=01:03 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   23.010628] audit: type=2501 audit(1569066974.573:161): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/full" rdev=01:07 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   23.010648] audit: type=2501 audit(1569066974.573:162): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/zero" rdev=01:05 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   23.010669] audit: type=2501 audit(1569066974.573:163): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/random" rdev=01:08 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   24.377102] vfio-pci 0000:06:00.0: enabling device (0000 -> 0003)
[   24.377458] vfio-pci 0000:06:00.0: vfio_ecap_init: hiding ecap 0x1e@0x258
[   24.377488] vfio-pci 0000:06:00.0: vfio_ecap_init: hiding ecap 0x19@0x900
[   24.397129] vfio-pci 0000:06:00.1: enabling device (0000 -> 0002)
[   25.023779] virbr1: port 2(vnet0) entered learning state
[   27.157079] virbr1: port 2(vnet0) entered forwarding state
[   27.157080] virbr1: topology change detected, propagating
[   33.565141] kauditd_printk_skb: 21 callbacks suppressed
[   33.565142] audit: type=1131 audit(1569066985.126:185): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.856602] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[   52.580474] audit: type=2501 audit(1569067004.143:186): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/002" rdev=BD:01 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   52.688530] audit: type=2501 audit(1569067004.250:187): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   52.711198] audit: type=2501 audit(1569067004.273:188): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/003" rdev=BD:02 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   53.010243] audit: type=2501 audit(1569067004.570:189): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   63.275950] audit: type=1006 audit(1569067014.836:190): pid=1460 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   63.507255] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[   63.659503] logitech-djreceiver 0003:046D:C52B.0009: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[   63.771193] audit: type=2501 audit(1569067015.333:191): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   63.869839] logitech-hidpp-device 0003:046D:4069.000A: HID++ 4.5 device connected.
[   63.901835] logitech-hidpp-device 0003:046D:4069.000A: HID++ 4.5 device connected.
[   63.920590] usb 1-5: reset full-speed USB device number 3 using xhci_hcd
[   64.063252] input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C33A.000B/input/input36
[   64.117248] hid-generic 0003:046D:C33A.000B: input,hidraw2: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input0
[   64.117949] input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.000C/input/input37
[   64.173834] input: Logitech G413 Carbon Mechanical Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.000C/input/input38
[   64.173939] hid-generic 0003:046D:C33A.000C: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input1
[   64.174275] audit: type=2501 audit(1569067015.736:192): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   64.271849] logitech-hidpp-device 0003:046D:4069.000A: multiplier = 8
[   64.303848] logitech-hidpp-device 0003:046D:4069.000A: multiplier = 8
[   64.303965] input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0009/0003:046D:4069.000A/input/input41
[   64.304127] logitech-hidpp-device 0003:046D:4069.000A: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
[   70.443781] audit: type=1130 audit(1569067022.003:193): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   88.145863] brave[2270]: segfault at 10 ip 000055ba4512a60d sp 00007ffe234c4890 error 4 in brave[55ba442f4000+7325000]
[   88.145869] Code: 7c 24 17 00 79 0c 48 8b bd f0 fe ff ff e8 9b 93 f1 01 48 8d 85 78 fe ff ff 0f 57 c0 0f 11 85 78 fe ff ff 48 89 85 70 fe ff ff <48> 8b 43 10 48 3b 43 08 4c 8b a5 e8 fe ff ff 0f 84 13 06 00 00 49
[   88.146030] audit: type=1701 audit(1569067039.706:194): auid=1000 uid=1000 gid=1000 ses=1 pid=2270 comm="brave" exe="/usr/lib/brave-bin/brave" sig=11 res=1
[   88.157663] audit: type=1130 audit(1569067039.720:195): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-2359-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   89.058515] audit: type=1131 audit(1569067040.620:196): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-2359-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   98.474232] audit: type=2501 audit(1569067050.036:197): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/002" rdev=BD:01 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   98.599914] audit: type=2501 audit(1569067050.160:198): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   98.620416] audit: type=2501 audit(1569067050.183:199): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/003" rdev=BD:02 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[   98.878941] audit: type=2501 audit(1569067050.440:200): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[  105.243693] audit: type=1006 audit(1569067056.803:201): pid=2468 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[  105.443981] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[  105.595714] logitech-djreceiver 0003:046D:C52B.000F: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[  105.707666] audit: type=2501 audit(1569067057.270:202): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[  105.829892] logitech-hidpp-device 0003:046D:4069.0010: HID++ 4.5 device connected.
[  105.860615] usb 1-5: reset full-speed USB device number 3 using xhci_hcd
[  105.861890] logitech-hidpp-device 0003:046D:4069.0010: HID++ 4.5 device connected.
[  106.003916] input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C33A.0011/input/input42
[  106.060676] hid-generic 0003:046D:C33A.0011: input,hidraw2: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input0
[  106.061830] input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.0012/input/input43
[  106.117300] input: Logitech G413 Carbon Mechanical Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.0012/input/input44
[  106.117519] hid-generic 0003:046D:C33A.0012: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input1
[  106.118295] audit: type=2501 audit(1569067057.680:203): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[  106.243858] logitech-hidpp-device 0003:046D:4069.0010: multiplier = 8
[  106.275890] logitech-hidpp-device 0003:046D:4069.0010: multiplier = 8
[  106.276019] input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.000F/0003:046D:4069.0010/input/input47
[  106.276254] logitech-hidpp-device 0003:046D:4069.0010: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
[  118.289977] brave[2529]: segfault at 10 ip 00005638b00cb60d sp 00007ffeabecfa10 error 4 in brave[5638af295000+7325000]
[  118.289983] Code: 7c 24 17 00 79 0c 48 8b bd f0 fe ff ff e8 9b 93 f1 01 48 8d 85 78 fe ff ff 0f 57 c0 0f 11 85 78 fe ff ff 48 89 85 70 fe ff ff <48> 8b 43 10 48 3b 43 08 4c 8b a5 e8 fe ff ff 0f 84 13 06 00 00 49
[  118.290015] audit: type=1701 audit(1569067069.850:204): auid=1000 uid=1000 gid=1000 ses=1 pid=2529 comm="brave" exe="/usr/lib/brave-bin/brave" sig=11 res=1
[  118.303793] audit: type=1130 audit(1569067069.866:205): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-2625-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  119.196724] audit: type=1131 audit(1569067070.756:206): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-2625-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  135.207009] virbr1: port 2(vnet0) entered disabled state
[  135.208427] device vnet0 left promiscuous mode
[  135.208435] virbr1: port 2(vnet0) entered disabled state
[  135.208450] audit: type=1700 audit(1569067086.770:207): dev=vnet0 prom=0 old_prom=256 auid=4294967295 uid=65534 gid=992 ses=4294967295
[  136.451233] audit: type=2500 audit(1569067088.013:208): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm op=stop reason=shutdown vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 vm-pid=-1 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
[  147.379076] usb 1-3: USB disconnect, device number 2
[  149.267081] usb 1-3: new full-speed USB device number 4 using xhci_hcd
[  149.410310] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
[  149.410314] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  149.410317] usb 1-3: Product: USB Receiver
[  149.410319] usb 1-3: Manufacturer: Logitech
[  149.422085] logitech-djreceiver 0003:046D:C52B.0015: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[  149.745944] logitech-hidpp-device 0003:046D:4069.0016: HID++ 4.5 device connected.
[  149.809940] logitech-hidpp-device 0003:046D:4069.0016: HID++ 4.5 device connected.
[  150.551955] logitech-hidpp-device 0003:046D:4069.0016: multiplier = 8
[  150.552180] input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0015/0003:046D:4069.0016/input/input48
[  150.552474] logitech-hidpp-device 0003:046D:4069.0016: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
[  150.615943] logitech-hidpp-device 0003:046D:4069.0016: multiplier = 8
[  159.277525] usb 1-5: USB disconnect, device number 3
[  160.593776] usb 1-5: new full-speed USB device number 5 using xhci_hcd
[  160.735119] usb 1-5: New USB device found, idVendor=046d, idProduct=c33a, bcdDevice=14.00
[  160.735123] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  160.735126] usb 1-5: Product: G413 Carbon Mechanical Gaming Keyboard
[  160.735129] usb 1-5: Manufacturer: Logitech
[  160.735131] usb 1-5: SerialNumber: 037B385E3638
[  160.737207] input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C33A.0017/input/input49
[  160.794157] hid-generic 0003:046D:C33A.0017: input,hidraw2: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input0
[  160.795449] input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.0018/input/input50
[  160.850655] input: Logitech G413 Carbon Mechanical Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.0018/input/input51
[  160.850969] hid-generic 0003:046D:C33A.0018: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input1
[  163.007479] usb 1-3: USB disconnect, device number 4
[  164.617084] usb 1-3: new full-speed USB device number 6 using xhci_hcd
[  164.760311] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
[  164.760315] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  164.760317] usb 1-3: Product: USB Receiver
[  164.760319] usb 1-3: Manufacturer: Logitech
[  164.771298] logitech-djreceiver 0003:046D:C52B.001B: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[  165.683980] logitech-hidpp-device 0003:046D:4069.001C: HID++ 4.5 device connected.
[  165.721973] logitech-hidpp-device 0003:046D:4069.001C: HID++ 4.5 device connected.
[  166.091958] logitech-hidpp-device 0003:046D:4069.001C: multiplier = 8
[  166.092132] input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.001B/0003:046D:4069.001C/input/input54
[  166.092406] logitech-hidpp-device 0003:046D:4069.001C: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
[  166.133972] logitech-hidpp-device 0003:046D:4069.001C: multiplier = 8
[  175.382016] usb 1-3: USB disconnect, device number 6
[  177.237067] usb 1-3: new full-speed USB device number 7 using xhci_hcd
[  177.380135] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
[  177.380138] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  177.380140] usb 1-3: Product: USB Receiver
[  177.380141] usb 1-3: Manufacturer: Logitech
[  177.389802] logitech-djreceiver 0003:046D:C52B.001F: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[  177.511544] input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.001F/0003:046D:4069.0020/input/input55
[  177.512114] logitech-hidpp-device 0003:046D:4069.0020: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
[  177.781975] logitech-hidpp-device 0003:046D:4069.0020: HID++ 4.5 device connected.
[  178.113972] logitech-hidpp-device 0003:046D:4069.0020: multiplier = 8

journalctl

-- Logs begin at Wed 2019-09-18 20:21:55 EEST, end at Sat 2019-09-21 15:10:52 EEST. --
Sep 21 14:56:05 arch-desktop systemd-networkd[434]: enp3s0: Gained IPv6LL
Sep 21 14:56:05 arch-desktop NetworkManager[605]: <info>  [1569066965.5707] dhcp6 (enp3s0): activation: beginning transaction (timeout in 45 seconds)
Sep 21 14:56:05 arch-desktop systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Sep 21 14:56:05 arch-desktop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:05 arch-desktop kernel: audit: type=1131 audit(1569066965.570:151): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:05 arch-desktop dnsmasq[623]: no servers found in /opt/valet-linux/dns-servers, will retry
Sep 21 14:56:05 arch-desktop dnsmasq[623]: reading /opt/valet-linux/dns-servers
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 192.168.1.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 1.1.1.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 1.0.0.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver fd34:e42c:74d3::1#53
Sep 21 14:56:05 arch-desktop dnsmasq[769]: no servers found in /etc/resolv.conf, will retry
Sep 21 14:56:05 arch-desktop dnsmasq[769]: reading /etc/resolv.conf
Sep 21 14:56:05 arch-desktop dnsmasq[769]: using nameserver 127.0.0.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: no servers found in /opt/valet-linux/dns-servers, will retry
Sep 21 14:56:05 arch-desktop dnsmasq[623]: reading /opt/valet-linux/dns-servers
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 192.168.1.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 1.1.1.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 1.0.0.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver fd34:e42c:74d3::1#53
Sep 21 14:56:05 arch-desktop dnsmasq[769]: no servers found in /etc/resolv.conf, will retry
Sep 21 14:56:05 arch-desktop dnsmasq[769]: reading /etc/resolv.conf
Sep 21 14:56:05 arch-desktop dnsmasq[769]: using nameserver 127.0.0.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: no servers found in /opt/valet-linux/dns-servers, will retry
Sep 21 14:56:05 arch-desktop dnsmasq[623]: reading /opt/valet-linux/dns-servers
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 192.168.1.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 1.1.1.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 1.0.0.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver fd34:e42c:74d3::1#53
Sep 21 14:56:05 arch-desktop dnsmasq[769]: no servers found in /etc/resolv.conf, will retry
Sep 21 14:56:05 arch-desktop dnsmasq[769]: reading /etc/resolv.conf
Sep 21 14:56:05 arch-desktop dnsmasq[769]: using nameserver 127.0.0.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: no servers found in /opt/valet-linux/dns-servers, will retry
Sep 21 14:56:05 arch-desktop dnsmasq[623]: reading /opt/valet-linux/dns-servers
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 192.168.1.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 1.1.1.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 1.0.0.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver fd34:e42c:74d3::1#53
Sep 21 14:56:05 arch-desktop dnsmasq[769]: no servers found in /etc/resolv.conf, will retry
Sep 21 14:56:05 arch-desktop dnsmasq[769]: reading /etc/resolv.conf
Sep 21 14:56:05 arch-desktop dnsmasq[769]: using nameserver 127.0.0.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: no servers found in /opt/valet-linux/dns-servers, will retry
Sep 21 14:56:05 arch-desktop dnsmasq[623]: reading /opt/valet-linux/dns-servers
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 192.168.1.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 1.1.1.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver 1.0.0.1#53
Sep 21 14:56:05 arch-desktop dnsmasq[623]: using nameserver fd34:e42c:74d3::1#53
Sep 21 14:56:05 arch-desktop dnsmasq[769]: no servers found in /etc/resolv.conf, will retry
Sep 21 14:56:05 arch-desktop dnsmasq[769]: reading /etc/resolv.conf
Sep 21 14:56:05 arch-desktop dnsmasq[769]: using nameserver 127.0.0.1#53
Sep 21 14:56:05 arch-desktop valet-dns[1123]: Valet DNS Watcher started succesfully.
Sep 21 14:56:05 arch-desktop systemd[1]: Started Valet DNS Resolution.
Sep 21 14:56:05 arch-desktop audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=valet-dns comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:05 arch-desktop systemd[1]: Reached target Multi-User System.
Sep 21 14:56:05 arch-desktop systemd[1]: Reached target Graphical Interface.
Sep 21 14:56:05 arch-desktop kernel: audit: type=1130 audit(1569066965.733:152): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=valet-dns comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:05 arch-desktop systemd[1]: Startup finished in 6.546s (firmware) + 2.470s (loader) + 988ms (kernel) + 1.279s (initrd) + 11.905s (userspace) = 23.190s.
Sep 21 14:56:06 arch-desktop NetworkManager[605]: <info>  [1569066966.6036] dhcp6 (enp3s0): state changed unknown -> bound
Sep 21 14:56:06 arch-desktop dbus-daemon[604]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.2' (uid=0 pid=605 comm="/usr/bin/NetworkManager --no-daemon ")
Sep 21 14:56:06 arch-desktop systemd[1]: Starting Network Manager Script Dispatcher Service...
Sep 21 14:56:06 arch-desktop dbus-daemon[604]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Sep 21 14:56:06 arch-desktop systemd[1]: Started Network Manager Script Dispatcher Service.
Sep 21 14:56:06 arch-desktop audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:06 arch-desktop kernel: audit: type=1130 audit(1569066966.616:153): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:09 arch-desktop dbus-daemon[829]: [session uid=1000 pid=829] Activating service name='ca.desrt.dconf' requested by ':1.15' (uid=1000 pid=1355 comm="python3 /usr/share/virt-manager/virt-manager ")
Sep 21 14:56:09 arch-desktop dbus-daemon[829]: [session uid=1000 pid=829] Successfully activated service 'ca.desrt.dconf'
Sep 21 14:56:12 arch-desktop polkitd[842]: Operator of unix-session:1 successfully authenticated as unix-user:cpoul to gain TEMPORARY authorization for action org.libvirt.unix.manage for unix-process:1355:1788 [python3 /usr/share/virt-manager/virt-manager] (owned by unix-user:cpoul)
Sep 21 14:56:12 arch-desktop libvirtd[663]: operation failed: pool 'default' already exists with uuid 4675e17e-83ba-4082-97d4-f35ee71ad3eb
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_MACHINE_ID pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 vm-ctx=+65534:+992 img-ctx=+65534:+992 model=dac exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop kernel: audit: type=2502 audit(1569066974.530:154): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 vm-ctx=+65534:+992 img-ctx=+65534:+992 model=dac exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop systemd[1]: Listening on Virtual machine log manager socket.
Sep 21 14:56:14 arch-desktop systemd[1]: Started Virtual machine log manager.
Sep 21 14:56:14 arch-desktop audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=virtlogd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop kernel: audit: type=1130 audit(1569066974.543:155): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=virtlogd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit: ANOM_PROMISCUOUS dev=vnet0 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=net reason=open vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 net=52:54:00:11:02:6e path="/dev/net/tun" rdev=0A:C8 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop systemd-networkd[434]: vnet0: rtnl: received neighbor message with invalid family, ignoring.
Sep 21 14:56:14 arch-desktop kernel: virbr1: port 2(vnet0) entered blocking state
Sep 21 14:56:14 arch-desktop kernel: virbr1: port 2(vnet0) entered disabled state
Sep 21 14:56:14 arch-desktop kernel: device vnet0 entered promiscuous mode
Sep 21 14:56:14 arch-desktop kernel: audit: type=1700 audit(1569066974.556:156): dev=vnet0 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
Sep 21 14:56:14 arch-desktop kernel: virbr1: port 2(vnet0) entered blocking state
Sep 21 14:56:14 arch-desktop kernel: virbr1: port 2(vnet0) entered listening state
Sep 21 14:56:14 arch-desktop kernel: audit: type=2501 audit(1569066974.556:157): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=net reason=open vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 net=52:54:00:11:02:6e path="/dev/net/tun" rdev=0A:C8 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop systemd-networkd[434]: vnet0: rtnl: received neighbor message with invalid family, ignoring.
Sep 21 14:56:14 arch-desktop systemd-networkd[434]: vnet0: Gained carrier
Sep 21 14:56:14 arch-desktop systemd-udevd[1385]: Using default interface naming scheme 'v243'.
Sep 21 14:56:14 arch-desktop NetworkManager[605]: <info>  [1569066974.5634] manager: (vnet0): new Tun device (/org/freedesktop/NetworkManager/Devices/5)
Sep 21 14:56:14 arch-desktop systemd-udevd[1385]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Sep 21 14:56:14 arch-desktop NetworkManager[605]: <info>  [1569066974.5686] device (vnet0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Sep 21 14:56:14 arch-desktop NetworkManager[605]: <warn>  [1569066974.5696] device (vnet0): connectivity: "/proc/sys/net/ipv4/conf/vnet0/rp_filter" is set to "1". This might break connectivity checking for IPv4 on this device
Sep 21 14:56:14 arch-desktop NetworkManager[605]: <info>  [1569066974.5701] device (vnet0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Sep 21 14:56:14 arch-desktop systemd-machined[607]: New machine qemu-1-win10.
Sep 21 14:56:14 arch-desktop systemd[1]: Started Virtual Machine qemu-1-win10.
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=deny vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=all exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop kernel: audit: type=2501 audit(1569066974.570:158): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=deny vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=all exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=major category=pty maj=88 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/null" rdev=01:03 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/full" rdev=01:07 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/zero" rdev=01:05 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/random" rdev=01:08 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/urandom" rdev=01:09 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/ptmx" rdev=05:02 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/kvm" rdev=0A:E8 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/rtc" rdev=FA:00 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/hpet" rdev=0A:E4 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/vfio/12" rdev=F3:00 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/vfio/vfio" rdev=0A:C4 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/vfio/12" rdev=F3:00 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/vfio/vfio" rdev=0A:C4 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop kernel: audit: type=2501 audit(1569066974.573:159): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=major category=pty maj=88 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop kernel: audit: type=2501 audit(1569066974.573:160): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/null" rdev=01:03 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop kernel: audit: type=2501 audit(1569066974.573:161): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/full" rdev=01:07 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop kernel: audit: type=2501 audit(1569066974.573:162): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/zero" rdev=01:05 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:14 arch-desktop kernel: audit: type=2501 audit(1569066974.573:163): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/random" rdev=01:08 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:15 arch-desktop kernel: vfio-pci 0000:06:00.0: enabling device (0000 -> 0003)
Sep 21 14:56:15 arch-desktop kernel: vfio-pci 0000:06:00.0: vfio_ecap_init: hiding ecap 0x1e@0x258
Sep 21 14:56:15 arch-desktop kernel: vfio-pci 0000:06:00.0: vfio_ecap_init: hiding ecap 0x19@0x900
Sep 21 14:56:15 arch-desktop systemd-networkd[434]: vnet0: Gained IPv6LL
Sep 21 14:56:15 arch-desktop kernel: vfio-pci 0000:06:00.1: enabling device (0000 -> 0002)
Sep 21 14:56:16 arch-desktop systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Sep 21 14:56:16 arch-desktop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:16 arch-desktop kernel: virbr1: port 2(vnet0) entered learning state
Sep 21 14:56:17 arch-desktop libvirtd[663]: host doesn't support hyperv 'relaxed' feature
Sep 21 14:56:17 arch-desktop libvirtd[663]: host doesn't support hyperv 'vapic' feature
Sep 21 14:56:17 arch-desktop libvirtd[663]: host doesn't support hyperv 'spinlocks' feature
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=disk reason=start vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 old-disk="?" new-disk="/home/cpoul/VMs/win10.qcow2" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=net reason=start vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 old-net="?" new-net="52:54:00:11:02:6e" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=start vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=pci device="0000:06:00.0" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=start vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=pci device="0000:06:00.1" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=start vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device=555342207265646972646576 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=start vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device=555342207265646972646576 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=chardev reason=start vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 old-chardev="?" new-chardev="/dev/pts/0" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=shmem reason=start vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 size=33554432 path=/dev/shm/looking-glass exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=mem reason=start vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 old-mem=0 new-mem=16777216 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=vcpu reason=start vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 old-vcpu=0 new-vcpu=4 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:17 arch-desktop audit[663]: VIRT_CONTROL pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm op=start reason=booted vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 vm-pid=1397 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:18 arch-desktop systemd-networkd[434]: virbr1: Gained carrier
Sep 21 14:56:18 arch-desktop NetworkManager[605]: <info>  [1569066978.7236] device (virbr1): carrier: link connected
Sep 21 14:56:18 arch-desktop kernel: virbr1: port 2(vnet0) entered forwarding state
Sep 21 14:56:18 arch-desktop kernel: virbr1: topology change detected, propagating
Sep 21 14:56:25 arch-desktop systemd[1]: systemd-hostnamed.service: Succeeded.
Sep 21 14:56:25 arch-desktop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:25 arch-desktop kernel: kauditd_printk_skb: 21 callbacks suppressed
Sep 21 14:56:25 arch-desktop kernel: audit: type=1131 audit(1569066985.126:185): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:33 arch-desktop dnsmasq-dhcp[769]: DHCPDISCOVER(virbr1) 192.168.100.186 52:54:00:11:02:6e
Sep 21 14:56:33 arch-desktop dnsmasq-dhcp[769]: DHCPOFFER(virbr1) 192.168.100.186 52:54:00:11:02:6e
Sep 21 14:56:33 arch-desktop dnsmasq-dhcp[769]: DHCPREQUEST(virbr1) 192.168.100.186 52:54:00:11:02:6e
Sep 21 14:56:33 arch-desktop dnsmasq-dhcp[769]: DHCPACK(virbr1) 192.168.100.186 52:54:00:11:02:6e DESKTOP-CRV02UI
Sep 21 14:56:33 arch-desktop kernel: nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
Sep 21 14:56:44 arch-desktop sudo[1435]:    cpoul : TTY=unknown ; PWD=/home/cpoul ; USER=root ; COMMAND=/home/cpoul/.VFIOinput/input_attach.sh
Sep 21 14:56:44 arch-desktop sudo[1435]: pam_unix(sudo:session): session opened for user root by (uid=0)
Sep 21 14:56:44 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/002" rdev=BD:01 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:44 arch-desktop kernel: audit: type=2501 audit(1569067004.143:186): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/002" rdev=BD:01 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:44 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:44 arch-desktop kernel: audit: type=2501 audit(1569067004.250:187): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:44 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/003" rdev=BD:02 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:44 arch-desktop kernel: audit: type=2501 audit(1569067004.273:188): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/003" rdev=BD:02 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:44 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:44 arch-desktop kernel: audit: type=2501 audit(1569067004.570:189): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:44 arch-desktop sudo[1435]: pam_unix(sudo:session): session closed for user root
Sep 21 14:56:54 arch-desktop sshd[1460]: Accepted publickey for cpoul from 192.168.100.186 port 49698 ssh2: RSA SHA256:HVcAyNn0MLIeCbnG4Heb3bqhzNSj18s8V/sMHUftEug
Sep 21 14:56:54 arch-desktop sshd[1460]: pam_unix(sshd:session): session opened for user cpoul by (uid=0)
Sep 21 14:56:54 arch-desktop kernel: audit: type=1006 audit(1569067014.836:190): pid=1460 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
Sep 21 14:56:54 arch-desktop systemd-logind[653]: New session 3 of user cpoul.
Sep 21 14:56:54 arch-desktop systemd[1]: Started Session 3 of user cpoul.
Sep 21 14:56:54 arch-desktop sudo[1463]:    cpoul : TTY=pts/1 ; PWD=/home/cpoul ; USER=root ; COMMAND=/home/cpoul/.VFIOinput/input_detach.sh
Sep 21 14:56:54 arch-desktop sudo[1463]: pam_unix(sudo:session): session opened for user root by cpoul(uid=0)
Sep 21 14:56:55 arch-desktop kernel: usb 1-3: reset full-speed USB device number 2 using xhci_hcd
Sep 21 14:56:55 arch-desktop kernel: logitech-djreceiver 0003:046D:C52B.0009: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
Sep 21 14:56:55 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:55 arch-desktop kernel: audit: type=2501 audit(1569067015.333:191): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:55 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.000A: HID++ 4.5 device connected.
Sep 21 14:56:55 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.000A: HID++ 4.5 device connected.
Sep 21 14:56:55 arch-desktop kernel: usb 1-5: reset full-speed USB device number 3 using xhci_hcd
Sep 21 14:56:55 arch-desktop kernel: input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C33A.000B/input/input36
Sep 21 14:56:55 arch-desktop systemd-udevd[1468]: 0003:046D:C33A.000B: Process '/usr/bin/g413-led -p /etc/g810-led/profile' failed with exit code 2.
Sep 21 14:56:55 arch-desktop kernel: hid-generic 0003:046D:C33A.000B: input,hidraw2: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input0
Sep 21 14:56:55 arch-desktop kernel: input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.000C/input/input37
Sep 21 14:56:55 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:55 arch-desktop kernel: input: Logitech G413 Carbon Mechanical Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.000C/input/input38
Sep 21 14:56:55 arch-desktop kernel: hid-generic 0003:046D:C33A.000C: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input1
Sep 21 14:56:55 arch-desktop kernel: audit: type=2501 audit(1569067015.736:192): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:56:55 arch-desktop sudo[1463]: pam_unix(sudo:session): session closed for user root
Sep 21 14:56:55 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event3 (Logitech G413 Carbon Mechanical Gaming Keyboard)
Sep 21 14:56:55 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event4 (Logitech G413 Carbon Mechanical Gaming Keyboard)
Sep 21 14:56:55 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.000A: multiplier = 8
Sep 21 14:56:55 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.000A: multiplier = 8
Sep 21 14:56:55 arch-desktop kernel: input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0009/0003:046D:4069.000A/input/input41
Sep 21 14:56:55 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.000A: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
Sep 21 14:56:55 arch-desktop sshd[1462]: Received disconnect from 192.168.100.186 port 49698:11: disconnected by user
Sep 21 14:56:55 arch-desktop sshd[1462]: Disconnected from user cpoul 192.168.100.186 port 49698
Sep 21 14:56:55 arch-desktop sshd[1460]: pam_unix(sshd:session): session closed for user cpoul
Sep 21 14:56:55 arch-desktop systemd[1]: session-3.scope: Succeeded.
Sep 21 14:56:55 arch-desktop systemd-logind[653]: Session 3 logged out. Waiting for processes to exit.
Sep 21 14:56:55 arch-desktop systemd-logind[653]: Removed session 3.
Sep 21 14:56:55 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event6 (Logitech MX Master 2S)
Sep 21 14:57:01 arch-desktop dbus-daemon[604]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service' requested by ':1.95' (uid=1000 pid=1539 comm="/usr/lib/brave-bin/brave ")
Sep 21 14:57:01 arch-desktop systemd[1]: Starting Daemon for power management...
Sep 21 14:57:02 arch-desktop dbus-daemon[604]: [system] Successfully activated service 'org.freedesktop.UPower'
Sep 21 14:57:02 arch-desktop kernel: audit: type=1130 audit(1569067022.003:193): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:02 arch-desktop audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:02 arch-desktop systemd[1]: Started Daemon for power management.
Sep 21 14:57:19 arch-desktop audit[2270]: ANOM_ABEND auid=1000 uid=1000 gid=1000 ses=1 pid=2270 comm="brave" exe="/usr/lib/brave-bin/brave" sig=11 res=1
Sep 21 14:57:19 arch-desktop kernel: brave[2270]: segfault at 10 ip 000055ba4512a60d sp 00007ffe234c4890 error 4 in brave[55ba442f4000+7325000]
Sep 21 14:57:19 arch-desktop kernel: Code: 7c 24 17 00 79 0c 48 8b bd f0 fe ff ff e8 9b 93 f1 01 48 8d 85 78 fe ff ff 0f 57 c0 0f 11 85 78 fe ff ff 48 89 85 70 fe ff ff <48> 8b 43 10 48 3b 43 08 4c 8b a5 e8 fe ff ff 0f 84 13 06 00 00 49
Sep 21 14:57:19 arch-desktop kernel: audit: type=1701 audit(1569067039.706:194): auid=1000 uid=1000 gid=1000 ses=1 pid=2270 comm="brave" exe="/usr/lib/brave-bin/brave" sig=11 res=1
Sep 21 14:57:19 arch-desktop systemd[1]: Created slice system-systemd\x2dcoredump.slice.
Sep 21 14:57:19 arch-desktop systemd[1]: Started Process Core Dump (PID 2359/UID 0).
Sep 21 14:57:19 arch-desktop audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-2359-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:19 arch-desktop kernel: audit: type=1130 audit(1569067039.720:195): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-2359-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:20 arch-desktop systemd-coredump[2367]: Process 2270 (brave) of user 1000 dumped core.
                                                     
                                                     Stack trace of thread 2270:
                                                     #0  0x000055ba4512a60d n/a (brave)
                                                     #1  0x000055ba4512642e n/a (brave)
                                                     #2  0x000055ba46d91419 n/a (brave)
                                                     #3  0x000055ba48de2bfc n/a (brave)
                                                     #4  0x000055ba47e9c096 n/a (brave)
                                                     #5  0x000055ba46d387ce n/a (brave)
                                                     #6  0x000055ba46d3852e n/a (brave)
                                                     #7  0x000055ba48de2bfc n/a (brave)
                                                     #8  0x000055ba47e9c096 n/a (brave)
                                                     #9  0x000055ba46d46f24 n/a (brave)
                                                     #10 0x000055ba46d44f7b n/a (brave)
                                                     #11 0x000055ba46d6609a n/a (brave)
                                                     #12 0x000055ba46d5fde6 n/a (brave)
                                                     #13 0x000055ba46d5fcd0 n/a (brave)
                                                     #14 0x000055ba46d5fd27 n/a (brave)
                                                     #15 0x000055ba45e73178 n/a (brave)
                                                     #16 0x000055ba46bdfc0b n/a (brave)
                                                     #17 0x000055ba4532bb34 n/a (brave)
                                                     #18 0x000055ba457613e1 n/a (brave)
                                                     #19 0x000055ba4532a6db n/a (brave)
                                                     #20 0x000055ba4532db2b n/a (brave)
                                                     #21 0x000055ba45328f80 n/a (brave)
                                                     #22 0x000055ba46b7bebb n/a (brave)
                                                     #23 0x000055ba46bcd81f n/a (brave)
                                                     #24 0x000055ba46b7a701 n/a (brave)
                                                     #25 0x000055ba447c4a5f ChromeMain (brave)
                                                     #26 0x00007f9dafc23ee3 __libc_start_main (libc.so.6)
                                                     #27 0x000055ba442f402a _start (brave)
                                                     
                                                     Stack trace of thread 2279:
                                                     #0  0x00007f9db143277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f5cb n/a (brave)
                                                     #2  0x000055ba4703fb38 n/a (brave)
                                                     #3  0x000055ba4703fd41 n/a (brave)
                                                     #4  0x000055ba46ffee5c n/a (brave)
                                                     #5  0x000055ba46fff6ff n/a (brave)
                                                     #6  0x000055ba46fff424 n/a (brave)
                                                     #7  0x000055ba47043118 n/a (brave)
                                                     #8  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #9  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2277:
                                                     #0  0x00007f9dafcf941e epoll_wait (libc.so.6)
                                                     #1  0x000055ba4710778b n/a (brave)
                                                     #2  0x000055ba471050c1 n/a (brave)
                                                     #3  0x000055ba470490c7 n/a (brave)
                                                     #4  0x000055ba46fef1c5 n/a (brave)
                                                     #5  0x000055ba46fc897a n/a (brave)
                                                     #6  0x000055ba46ffea44 n/a (brave)
                                                     #7  0x000055ba47009aae n/a (brave)
                                                     #8  0x000055ba47043118 n/a (brave)
                                                     #9  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #10 0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2271:
                                                     #0  0x00007f9dafcee667 __poll (libc.so.6)
                                                     #1  0x000055ba456c0842 n/a (brave)
                                                     #2  0x000055ba47043118 n/a (brave)
                                                     #3  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #4  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2292:
                                                     #0  0x00007f9db1432415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f4d2 n/a (brave)
                                                     #2  0x000055ba4703fbc7 n/a (brave)
                                                     #3  0x000055ba4703f9af n/a (brave)
                                                     #4  0x000055ba46fa99e5 n/a (brave)
                                                     #5  0x000055ba46fef1c5 n/a (brave)
                                                     #6  0x000055ba46fc897a n/a (brave)
                                                     #7  0x000055ba47009aae n/a (brave)
                                                     #8  0x000055ba47043118 n/a (brave)
                                                     #9  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #10 0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2278:
                                                     #0  0x00007f9db143277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f5cb n/a (brave)
                                                     #2  0x000055ba4703fb38 n/a (brave)
                                                     #3  0x000055ba4703fd41 n/a (brave)
                                                     #4  0x000055ba46ffee5c n/a (brave)
                                                     #5  0x000055ba46fff6ff n/a (brave)
                                                     #6  0x000055ba46fff424 n/a (brave)
                                                     #7  0x000055ba47043118 n/a (brave)
                                                     #8  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #9  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2283:
                                                     #0  0x00007f9dafcee667 __poll (libc.so.6)
                                                     #1  0x00007f9db0f37130 n/a (libglib-2.0.so.0)
                                                     #2  0x00007f9db0f380d3 g_main_loop_run (libglib-2.0.so.0)
                                                     #3  0x00007f9db0a80b18 n/a (libgio-2.0.so.0)
                                                     #4  0x00007f9db0f13bc1 n/a (libglib-2.0.so.0)
                                                     #5  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #6  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2286:
                                                     #0  0x00007f9db143277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f5cb n/a (brave)
                                                     #2  0x000055ba4703fb38 n/a (brave)
                                                     #3  0x000055ba4703fd41 n/a (brave)
                                                     #4  0x000055ba46ffee5c n/a (brave)
                                                     #5  0x000055ba46fff6ff n/a (brave)
                                                     #6  0x000055ba46fff424 n/a (brave)
                                                     #7  0x000055ba47043118 n/a (brave)
                                                     #8  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #9  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2276:
                                                     #0  0x00007f9db1436636 waitpid (libpthread.so.0)
                                                     #1  0x000055ba4703e54d n/a (brave)
                                                     #2  0x000055ba4703bc83 n/a (brave)
                                                     #3  0x000055ba47043118 n/a (brave)
                                                     #4  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #5  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2297:
                                                     #0  0x00007f9dafcee667 __poll (libc.so.6)
                                                     #1  0x00007f9da0df2c14 n/a (libpulse.so.0)
                                                     #2  0x00007f9da0e00059 pa_mainloop_poll (libpulse.so.0)
                                                     #3  0x00007f9da0e0a301 pa_mainloop_iterate (libpulse.so.0)
                                                     #4  0x00007f9da0e0a3b1 pa_mainloop_run (libpulse.so.0)
                                                     #5  0x00007f9da0dfa61e n/a (libpulse.so.0)
                                                     #6  0x00007f9da0d3ed1c n/a (libpulsecommon-13.0.so)
                                                     #7  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #8  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2280:
                                                     #0  0x00007f9dafcf941e epoll_wait (libc.so.6)
                                                     #1  0x000055ba4710778b n/a (brave)
                                                     #2  0x000055ba471050c1 n/a (brave)
                                                     #3  0x000055ba47049004 n/a (brave)
                                                     #4  0x000055ba46fef1c5 n/a (brave)
                                                     #5  0x000055ba46fc897a n/a (brave)
                                                     #6  0x000055ba45333c04 n/a (brave)
                                                     #7  0x000055ba47009aae n/a (brave)
                                                     #8  0x000055ba47043118 n/a (brave)
                                                     #9  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #10 0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2287:
                                                     #0  0x00007f9db143277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f5cb n/a (brave)
                                                     #2  0x000055ba4703fb38 n/a (brave)
                                                     #3  0x000055ba4703fd41 n/a (brave)
                                                     #4  0x000055ba46ffee5c n/a (brave)
                                                     #5  0x000055ba46fff6ff n/a (brave)
                                                     #6  0x000055ba46fff424 n/a (brave)
                                                     #7  0x000055ba47043118 n/a (brave)
                                                     #8  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #9  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2289:
                                                     #0  0x00007f9db143277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f5cb n/a (brave)
                                                     #2  0x000055ba4703fb38 n/a (brave)
                                                     #3  0x000055ba4703fd41 n/a (brave)
                                                     #4  0x000055ba46ffee5c n/a (brave)
                                                     #5  0x000055ba46fff6ff n/a (brave)
                                                     #6  0x000055ba46fff424 n/a (brave)
                                                     #7  0x000055ba47043118 n/a (brave)
                                                     #8  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #9  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2291:
                                                     #0  0x00007f9db1432415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f4d2 n/a (brave)
                                                     #2  0x000055ba482302cd n/a (brave)
                                                     #3  0x000055ba47043118 n/a (brave)
                                                     #4  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #5  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2288:
                                                     #0  0x00007f9db143277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f5cb n/a (brave)
                                                     #2  0x000055ba4703fb38 n/a (brave)
                                                     #3  0x000055ba4703fd41 n/a (brave)
                                                     #4  0x000055ba46ffee5c n/a (brave)
                                                     #5  0x000055ba46fff6ff n/a (brave)
                                                     #6  0x000055ba46fff424 n/a (brave)
                                                     #7  0x000055ba47043118 n/a (brave)
                                                     #8  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #9  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2296:
                                                     #0  0x00007f9dafcf941e epoll_wait (libc.so.6)
                                                     #1  0x000055ba4710778b n/a (brave)
                                                     #2  0x000055ba471050c1 n/a (brave)
                                                     #3  0x000055ba470490c7 n/a (brave)
                                                     #4  0x000055ba46fef1c5 n/a (brave)
                                                     #5  0x000055ba46fc897a n/a (brave)
                                                     #6  0x000055ba47009aae n/a (brave)
                                                     #7  0x000055ba47043118 n/a (brave)
                                                     #8  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #9  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2358:
                                                     #0  0x00007f9dafd58230 __memcmp_avx2_movbe (libc.so.6)
                                                     #1  0x000055ba46bc28af n/a (brave)
                                                     #2  0x000055ba46f95f5e n/a (brave)
                                                     #3  0x000055ba4700745e n/a (brave)
                                                     #4  0x000055ba47042fad n/a (brave)
                                                     #5  0x000055ba4704308c n/a (brave)
                                                     #6  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #7  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2299:
                                                     #0  0x00007f9db1432415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f4d2 n/a (brave)
                                                     #2  0x000055ba4703fbc7 n/a (brave)
                                                     #3  0x000055ba4703f9af n/a (brave)
                                                     #4  0x000055ba46fa99e5 n/a (brave)
                                                     #5  0x000055ba46fef1c5 n/a (brave)
                                                     #6  0x000055ba46fc897a n/a (brave)
                                                     #7  0x000055ba47009aae n/a (brave)
                                                     #8  0x000055ba47043118 n/a (brave)
                                                     #9  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #10 0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2298:
                                                     #0  0x00007f9db1432415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f4d2 n/a (brave)
                                                     #2  0x000055ba4703fbc7 n/a (brave)
                                                     #3  0x000055ba4703f9af n/a (brave)
                                                     #4  0x000055ba46fa99e5 n/a (brave)
                                                     #5  0x000055ba46fef1c5 n/a (brave)
                                                     #6  0x000055ba46fc897a n/a (brave)
                                                     #7  0x000055ba47009aae n/a (brave)
                                                     #8  0x000055ba47043118 n/a (brave)
                                                     #9  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #10 0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2281:
                                                     #0  0x00007f9dafcf0e5b __select (libc.so.6)
                                                     #1  0x000055ba46f997f6 n/a (brave)
                                                     #2  0x000055ba47043118 n/a (brave)
                                                     #3  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #4  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2285:
                                                     #0  0x00007f9db1435a6c read (libpthread.so.0)
                                                     #1  0x000055ba45e79460 n/a (brave)
                                                     #2  0x000055ba47043118 n/a (brave)
                                                     #3  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #4  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2290:
                                                     #0  0x00007f9db143277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f5cb n/a (brave)
                                                     #2  0x000055ba4703fb38 n/a (brave)
                                                     #3  0x000055ba4703fd41 n/a (brave)
                                                     #4  0x000055ba46ffee5c n/a (brave)
                                                     #5  0x000055ba46fff6ff n/a (brave)
                                                     #6  0x000055ba46fff424 n/a (brave)
                                                     #7  0x000055ba47043118 n/a (brave)
                                                     #8  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #9  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2294:
                                                     #0  0x00007f9db1432415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f4d2 n/a (brave)
                                                     #2  0x000055ba4703fbc7 n/a (brave)
                                                     #3  0x000055ba4703f9af n/a (brave)
                                                     #4  0x000055ba46fa99e5 n/a (brave)
                                                     #5  0x000055ba46fef1c5 n/a (brave)
                                                     #6  0x000055ba46fc897a n/a (brave)
                                                     #7  0x000055ba47009aae n/a (brave)
                                                     #8  0x000055ba47043118 n/a (brave)
                                                     #9  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #10 0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2282:
                                                     #0  0x00007f9dafcee667 __poll (libc.so.6)
                                                     #1  0x00007f9db0f37130 n/a (libglib-2.0.so.0)
                                                     #2  0x00007f9db0f37201 g_main_context_iteration (libglib-2.0.so.0)
                                                     #3  0x00007f9db0f37252 n/a (libglib-2.0.so.0)
                                                     #4  0x00007f9db0f13bc1 n/a (libglib-2.0.so.0)
                                                     #5  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #6  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2284:
                                                     #0  0x00007f9dafcf941e epoll_wait (libc.so.6)
                                                     #1  0x000055ba4710778b n/a (brave)
                                                     #2  0x000055ba471050c1 n/a (brave)
                                                     #3  0x000055ba470490c7 n/a (brave)
                                                     #4  0x000055ba46fef1c5 n/a (brave)
                                                     #5  0x000055ba46fc897a n/a (brave)
                                                     #6  0x000055ba47009aae n/a (brave)
                                                     #7  0x000055ba47043118 n/a (brave)
                                                     #8  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #9  0x00007f9dafcf90e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2293:
                                                     #0  0x00007f9db1432415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x000055ba4703f4d2 n/a (brave)
                                                     #2  0x000055ba4703fbc7 n/a (brave)
                                                     #3  0x000055ba4703f9af n/a (brave)
                                                     #4  0x000055ba46ffee4e n/a (brave)
                                                     #5  0x000055ba46fff6ff n/a (brave)
                                                     #6  0x000055ba46fff484 n/a (brave)
                                                     #7  0x000055ba47043118 n/a (brave)
                                                     #8  0x00007f9db142c57f start_thread (libpthread.so.0)
                                                     #9  0x00007f9dafcf90e3 __clone (libc.so.6)
Sep 21 14:57:20 arch-desktop systemd[1]: systemd-coredump@0-2359-0.service: Succeeded.
Sep 21 14:57:20 arch-desktop kernel: audit: type=1131 audit(1569067040.620:196): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-2359-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:20 arch-desktop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-2359-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:29 arch-desktop sudo[2446]:    cpoul : TTY=unknown ; PWD=/home/cpoul ; USER=root ; COMMAND=/home/cpoul/.VFIOinput/input_attach.sh
Sep 21 14:57:30 arch-desktop sudo[2446]: pam_unix(sudo:session): session opened for user root by (uid=0)
Sep 21 14:57:30 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/002" rdev=BD:01 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:30 arch-desktop kernel: audit: type=2501 audit(1569067050.036:197): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/002" rdev=BD:01 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:30 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:30 arch-desktop kernel: audit: type=2501 audit(1569067050.160:198): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:30 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/003" rdev=BD:02 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:30 arch-desktop kernel: audit: type=2501 audit(1569067050.183:199): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=cgroup reason=allow vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 cgroup="/sys/fs/cgroup/devices/machine.slice/machine-qemu\x2d1\x2dwin10.scope/" class=path path="/dev/bus/usb/001/003" rdev=BD:02 acl=rw exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:30 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:30 arch-desktop kernel: audit: type=2501 audit(1569067050.440:200): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=attach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:30 arch-desktop sudo[2446]: pam_unix(sudo:session): session closed for user root
Sep 21 14:57:36 arch-desktop sshd[2468]: Accepted publickey for cpoul from 192.168.100.186 port 49852 ssh2: RSA SHA256:HVcAyNn0MLIeCbnG4Heb3bqhzNSj18s8V/sMHUftEug
Sep 21 14:57:36 arch-desktop kernel: audit: type=1006 audit(1569067056.803:201): pid=2468 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
Sep 21 14:57:36 arch-desktop sshd[2468]: pam_unix(sshd:session): session opened for user cpoul by (uid=0)
Sep 21 14:57:36 arch-desktop systemd-logind[653]: New session 4 of user cpoul.
Sep 21 14:57:36 arch-desktop systemd[1]: Started Session 4 of user cpoul.
Sep 21 14:57:36 arch-desktop sudo[2471]:    cpoul : TTY=pts/1 ; PWD=/home/cpoul ; USER=root ; COMMAND=/home/cpoul/.VFIOinput/input_detach.sh
Sep 21 14:57:36 arch-desktop sudo[2471]: pam_unix(sudo:session): session opened for user root by cpoul(uid=0)
Sep 21 14:57:37 arch-desktop kernel: usb 1-3: reset full-speed USB device number 2 using xhci_hcd
Sep 21 14:57:37 arch-desktop kernel: logitech-djreceiver 0003:046D:C52B.000F: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
Sep 21 14:57:37 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:37 arch-desktop kernel: audit: type=2501 audit(1569067057.270:202): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.002" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:37 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0010: HID++ 4.5 device connected.
Sep 21 14:57:37 arch-desktop kernel: usb 1-5: reset full-speed USB device number 3 using xhci_hcd
Sep 21 14:57:37 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0010: HID++ 4.5 device connected.
Sep 21 14:57:37 arch-desktop kernel: input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C33A.0011/input/input42
Sep 21 14:57:37 arch-desktop systemd-udevd[2477]: 0003:046D:C33A.0011: Process '/usr/bin/g413-led -p /etc/g810-led/profile' failed with exit code 2.
Sep 21 14:57:37 arch-desktop kernel: hid-generic 0003:046D:C33A.0011: input,hidraw2: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input0
Sep 21 14:57:37 arch-desktop kernel: input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.0012/input/input43
Sep 21 14:57:37 arch-desktop upowerd[1744]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.000F/0003:046D:4069.0010/power_supply/hidpp_battery_4
Sep 21 14:57:37 arch-desktop audit[663]: VIRT_RESOURCE pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:37 arch-desktop kernel: input: Logitech G413 Carbon Mechanical Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.0012/input/input44
Sep 21 14:57:37 arch-desktop kernel: hid-generic 0003:046D:C33A.0012: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input1
Sep 21 14:57:37 arch-desktop kernel: audit: type=2501 audit(1569067057.680:203): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=dev reason=detach vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 bus=usb device="001.003" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:37 arch-desktop sudo[2471]: pam_unix(sudo:session): session closed for user root
Sep 21 14:57:37 arch-desktop sshd[2470]: Received disconnect from 192.168.100.186 port 49852:11: disconnected by user
Sep 21 14:57:37 arch-desktop sshd[2470]: Disconnected from user cpoul 192.168.100.186 port 49852
Sep 21 14:57:37 arch-desktop systemd[1]: session-4.scope: Succeeded.
Sep 21 14:57:37 arch-desktop sshd[2468]: pam_unix(sshd:session): session closed for user cpoul
Sep 21 14:57:37 arch-desktop systemd-logind[653]: Session 4 logged out. Waiting for processes to exit.
Sep 21 14:57:37 arch-desktop systemd-logind[653]: Removed session 4.
Sep 21 14:57:37 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event4 (Logitech G413 Carbon Mechanical Gaming Keyboard)
Sep 21 14:57:37 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event3 (Logitech G413 Carbon Mechanical Gaming Keyboard)
Sep 21 14:57:37 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0010: multiplier = 8
Sep 21 14:57:37 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0010: multiplier = 8
Sep 21 14:57:37 arch-desktop kernel: input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.000F/0003:046D:4069.0010/input/input47
Sep 21 14:57:37 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0010: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
Sep 21 14:57:37 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event6 (Logitech MX Master 2S)
Sep 21 14:57:37 arch-desktop upowerd[1744]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.000F/0003:046D:4069.0010/power_supply/hidpp_battery_3
Sep 21 14:57:49 arch-desktop kernel: brave[2529]: segfault at 10 ip 00005638b00cb60d sp 00007ffeabecfa10 error 4 in brave[5638af295000+7325000]
Sep 21 14:57:49 arch-desktop kernel: Code: 7c 24 17 00 79 0c 48 8b bd f0 fe ff ff e8 9b 93 f1 01 48 8d 85 78 fe ff ff 0f 57 c0 0f 11 85 78 fe ff ff 48 89 85 70 fe ff ff <48> 8b 43 10 48 3b 43 08 4c 8b a5 e8 fe ff ff 0f 84 13 06 00 00 49
Sep 21 14:57:49 arch-desktop kernel: audit: type=1701 audit(1569067069.850:204): auid=1000 uid=1000 gid=1000 ses=1 pid=2529 comm="brave" exe="/usr/lib/brave-bin/brave" sig=11 res=1
Sep 21 14:57:49 arch-desktop audit[2529]: ANOM_ABEND auid=1000 uid=1000 gid=1000 ses=1 pid=2529 comm="brave" exe="/usr/lib/brave-bin/brave" sig=11 res=1
Sep 21 14:57:49 arch-desktop systemd[1]: Started Process Core Dump (PID 2625/UID 0).
Sep 21 14:57:49 arch-desktop audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-2625-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:49 arch-desktop kernel: audit: type=1130 audit(1569067069.866:205): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-2625-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:50 arch-desktop systemd-coredump[2632]: Process 2529 (brave) of user 1000 dumped core.
                                                     
                                                     Stack trace of thread 2529:
                                                     #0  0x00005638b00cb60d n/a (brave)
                                                     #1  0x00005638b00c742e n/a (brave)
                                                     #2  0x00005638b1d32419 n/a (brave)
                                                     #3  0x00005638b3d83bfc n/a (brave)
                                                     #4  0x00005638b2e3d096 n/a (brave)
                                                     #5  0x00005638b1cd97ce n/a (brave)
                                                     #6  0x00005638b1cd952e n/a (brave)
                                                     #7  0x00005638b3d83bfc n/a (brave)
                                                     #8  0x00005638b2e3d096 n/a (brave)
                                                     #9  0x00005638b1ce7f24 n/a (brave)
                                                     #10 0x00005638b1ce5f7b n/a (brave)
                                                     #11 0x00005638b1d0709a n/a (brave)
                                                     #12 0x00005638b1d00de6 n/a (brave)
                                                     #13 0x00005638b1d00cd0 n/a (brave)
                                                     #14 0x00005638b1d00d27 n/a (brave)
                                                     #15 0x00005638b0e14178 n/a (brave)
                                                     #16 0x00005638b1b80c0b n/a (brave)
                                                     #17 0x00005638b02ccb34 n/a (brave)
                                                     #18 0x00005638b07023e1 n/a (brave)
                                                     #19 0x00005638b02cb6db n/a (brave)
                                                     #20 0x00005638b02ceb2b n/a (brave)
                                                     #21 0x00005638b02c9f80 n/a (brave)
                                                     #22 0x00005638b1b1cebb n/a (brave)
                                                     #23 0x00005638b1b6e81f n/a (brave)
                                                     #24 0x00005638b1b1b701 n/a (brave)
                                                     #25 0x00005638af765a5f ChromeMain (brave)
                                                     #26 0x00007fea0e1b3ee3 __libc_start_main (libc.so.6)
                                                     #27 0x00005638af29502a _start (brave)
                                                     
                                                     Stack trace of thread 2540:
                                                     #0  0x00007fea0e280e5b __select (libc.so.6)
                                                     #1  0x00005638b1f3a7f6 n/a (brave)
                                                     #2  0x00005638b1fe4118 n/a (brave)
                                                     #3  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #4  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2536:
                                                     #0  0x00007fea0e28941e epoll_wait (libc.so.6)
                                                     #1  0x00005638b20a878b n/a (brave)
                                                     #2  0x00005638b20a60c1 n/a (brave)
                                                     #3  0x00005638b1fea0c7 n/a (brave)
                                                     #4  0x00005638b1f901c5 n/a (brave)
                                                     #5  0x00005638b1f6997a n/a (brave)
                                                     #6  0x00005638b1f9fa44 n/a (brave)
                                                     #7  0x00005638b1faaaae n/a (brave)
                                                     #8  0x00005638b1fe4118 n/a (brave)
                                                     #9  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #10 0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2535:
                                                     #0  0x00007fea0f9c6636 waitpid (libpthread.so.0)
                                                     #1  0x00005638b1fdf54d n/a (brave)
                                                     #2  0x00005638b1fdcc83 n/a (brave)
                                                     #3  0x00005638b1fe4118 n/a (brave)
                                                     #4  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #5  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2556:
                                                     #0  0x00007fea0f9c2415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe04d2 n/a (brave)
                                                     #2  0x00005638b1fe0bc7 n/a (brave)
                                                     #3  0x00005638b1fe09af n/a (brave)
                                                     #4  0x00005638b1f4a9e5 n/a (brave)
                                                     #5  0x00005638b1f901c5 n/a (brave)
                                                     #6  0x00005638b1f6997a n/a (brave)
                                                     #7  0x00005638b1faaaae n/a (brave)
                                                     #8  0x00005638b1fe4118 n/a (brave)
                                                     #9  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #10 0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2537:
                                                     #0  0x00007fea0f9c277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe05cb n/a (brave)
                                                     #2  0x00005638b1fe0b38 n/a (brave)
                                                     #3  0x00005638b1fe0d41 n/a (brave)
                                                     #4  0x00005638b1f9fe5c n/a (brave)
                                                     #5  0x00005638b1fa06ff n/a (brave)
                                                     #6  0x00005638b1fa0424 n/a (brave)
                                                     #7  0x00005638b1fe4118 n/a (brave)
                                                     #8  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #9  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2538:
                                                     #0  0x00007fea0e28941e epoll_wait (libc.so.6)
                                                     #1  0x00005638b20a878b n/a (brave)
                                                     #2  0x00005638b20a60c1 n/a (brave)
                                                     #3  0x00005638b1fea004 n/a (brave)
                                                     #4  0x00005638b1f901c5 n/a (brave)
                                                     #5  0x00005638b1f6997a n/a (brave)
                                                     #6  0x00005638b02d4c04 n/a (brave)
                                                     #7  0x00005638b1faaaae n/a (brave)
                                                     #8  0x00005638b1fe4118 n/a (brave)
                                                     #9  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #10 0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2544:
                                                     #0  0x00007fea0f9c5a6c read (libpthread.so.0)
                                                     #1  0x00005638b0e1a460 n/a (brave)
                                                     #2  0x00005638b1fe4118 n/a (brave)
                                                     #3  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #4  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2545:
                                                     #0  0x00007fea0f9c277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe05cb n/a (brave)
                                                     #2  0x00005638b1fe0b38 n/a (brave)
                                                     #3  0x00005638b1fe0d41 n/a (brave)
                                                     #4  0x00005638b1f9fe5c n/a (brave)
                                                     #5  0x00005638b1fa06ff n/a (brave)
                                                     #6  0x00005638b1fa0424 n/a (brave)
                                                     #7  0x00005638b1fe4118 n/a (brave)
                                                     #8  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #9  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2541:
                                                     #0  0x00007fea0e27e667 __poll (libc.so.6)
                                                     #1  0x00007fea0f4c7130 n/a (libglib-2.0.so.0)
                                                     #2  0x00007fea0f4c7201 g_main_context_iteration (libglib-2.0.so.0)
                                                     #3  0x00007fea0f4c7252 n/a (libglib-2.0.so.0)
                                                     #4  0x00007fea0f4a3bc1 n/a (libglib-2.0.so.0)
                                                     #5  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #6  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2539:
                                                     #0  0x00007fea0f9c277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe05cb n/a (brave)
                                                     #2  0x00005638b1fe0b38 n/a (brave)
                                                     #3  0x00005638b1fe0d41 n/a (brave)
                                                     #4  0x00005638b1f9fe5c n/a (brave)
                                                     #5  0x00005638b1fa06ff n/a (brave)
                                                     #6  0x00005638b1fa0424 n/a (brave)
                                                     #7  0x00005638b1fe4118 n/a (brave)
                                                     #8  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #9  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2550:
                                                     #0  0x00007fea0f9c2415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe04d2 n/a (brave)
                                                     #2  0x00005638b1fe0bc7 n/a (brave)
                                                     #3  0x00005638b1fe09af n/a (brave)
                                                     #4  0x00005638b1f4a9e5 n/a (brave)
                                                     #5  0x00005638b1f901c5 n/a (brave)
                                                     #6  0x00005638b1f6997a n/a (brave)
                                                     #7  0x00005638b1faaaae n/a (brave)
                                                     #8  0x00005638b1fe4118 n/a (brave)
                                                     #9  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #10 0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2530:
                                                     #0  0x00007fea0e27e667 __poll (libc.so.6)
                                                     #1  0x00005638b0661842 n/a (brave)
                                                     #2  0x00005638b1fe4118 n/a (brave)
                                                     #3  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #4  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2549:
                                                     #0  0x00007fea0f9c2415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe04d2 n/a (brave)
                                                     #2  0x00005638b31d12cd n/a (brave)
                                                     #3  0x00005638b1fe4118 n/a (brave)
                                                     #4  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #5  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2552:
                                                     #0  0x00007fea0f9c2415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe04d2 n/a (brave)
                                                     #2  0x00005638b1fe0bc7 n/a (brave)
                                                     #3  0x00005638b1fe09af n/a (brave)
                                                     #4  0x00005638b1f4a9e5 n/a (brave)
                                                     #5  0x00005638b1f901c5 n/a (brave)
                                                     #6  0x00005638b1f6997a n/a (brave)
                                                     #7  0x00005638b1faaaae n/a (brave)
                                                     #8  0x00005638b1fe4118 n/a (brave)
                                                     #9  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #10 0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2542:
                                                     #0  0x00007fea0e27e667 __poll (libc.so.6)
                                                     #1  0x00007fea0f4c7130 n/a (libglib-2.0.so.0)
                                                     #2  0x00007fea0f4c80d3 g_main_loop_run (libglib-2.0.so.0)
                                                     #3  0x00007fea0f010b18 n/a (libgio-2.0.so.0)
                                                     #4  0x00007fea0f4a3bc1 n/a (libglib-2.0.so.0)
                                                     #5  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #6  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2622:
                                                     #0  0x00007fea0e25636d __nanosleep (libc.so.6)
                                                     #1  0x00007fea0e2816e9 usleep (libc.so.6)
                                                     #2  0x00005638b303ec7f n/a (brave)
                                                     #3  0x00005638b304be8e n/a (brave)
                                                     #4  0x00005638b3055855 n/a (brave)
                                                     #5  0x00005638b30619e8 n/a (brave)
                                                     #6  0x00005638b30401b9 n/a (brave)
                                                     #7  0x00005638b307df7c n/a (brave)
                                                     #8  0x00005638b304f0af n/a (brave)
                                                     #9  0x00005638b30b9990 n/a (brave)
                                                     #10 0x00005638b30919eb n/a (brave)
                                                     #11 0x00005638b30495f8 n/a (brave)
                                                     #12 0x00005638b3048843 n/a (brave)
                                                     #13 0x00005638b3048de3 n/a (brave)
                                                     #14 0x00005638b3034a66 n/a (brave)
                                                     #15 0x00005638b3032056 n/a (brave)
                                                     #16 0x00005638b3031cca n/a (brave)
                                                     #17 0x00005638b3a3ce4a n/a (brave)
                                                     #18 0x00005638b3a3bbe1 n/a (brave)
                                                     #19 0x00005638b3a3ba5e n/a (brave)
                                                     #20 0x00005638b1f7ed81 n/a (brave)
                                                     #21 0x00005638b1f9aa02 n/a (brave)
                                                     #22 0x00005638b1f9a453 n/a (brave)
                                                     #23 0x00005638b1fe3a2a n/a (brave)
                                                     #24 0x00005638b1f99e79 n/a (brave)
                                                     #25 0x00005638b1fa0617 n/a (brave)
                                                     #26 0x00005638b1fa0454 n/a (brave)
                                                     #27 0x00005638b1fe4118 n/a (brave)
                                                     #28 0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #29 0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2554:
                                                     #0  0x00007fea0e28941e epoll_wait (libc.so.6)
                                                     #1  0x00005638b20a878b n/a (brave)
                                                     #2  0x00005638b20a60c1 n/a (brave)
                                                     #3  0x00005638b1fea0c7 n/a (brave)
                                                     #4  0x00005638b1f901c5 n/a (brave)
                                                     #5  0x00005638b1f6997a n/a (brave)
                                                     #6  0x00005638b1faaaae n/a (brave)
                                                     #7  0x00005638b1fe4118 n/a (brave)
                                                     #8  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #9  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2548:
                                                     #0  0x00007fea0f9c277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe05cb n/a (brave)
                                                     #2  0x00005638b1fe0b38 n/a (brave)
                                                     #3  0x00005638b1fe0d41 n/a (brave)
                                                     #4  0x00005638b1f9fe5c n/a (brave)
                                                     #5  0x00005638b1fa06ff n/a (brave)
                                                     #6  0x00005638b1fa0424 n/a (brave)
                                                     #7  0x00005638b1fe4118 n/a (brave)
                                                     #8  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #9  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2555:
                                                     #0  0x00007fea0e27e667 __poll (libc.so.6)
                                                     #1  0x00007fe9ffb83c14 n/a (libpulse.so.0)
                                                     #2  0x00007fe9ffb91059 pa_mainloop_poll (libpulse.so.0)
                                                     #3  0x00007fe9ffb9b301 pa_mainloop_iterate (libpulse.so.0)
                                                     #4  0x00007fe9ffb9b3b1 pa_mainloop_run (libpulse.so.0)
                                                     #5  0x00007fe9ffb8b61e n/a (libpulse.so.0)
                                                     #6  0x00007fe9ffb0fd1c n/a (libpulsecommon-13.0.so)
                                                     #7  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #8  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2557:
                                                     #0  0x00007fea0f9c2415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe04d2 n/a (brave)
                                                     #2  0x00005638b1fe0bc7 n/a (brave)
                                                     #3  0x00005638b1fe09af n/a (brave)
                                                     #4  0x00005638b1f4a9e5 n/a (brave)
                                                     #5  0x00005638b1f901c5 n/a (brave)
                                                     #6  0x00005638b1f6997a n/a (brave)
                                                     #7  0x00005638b1faaaae n/a (brave)
                                                     #8  0x00005638b1fe4118 n/a (brave)
                                                     #9  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #10 0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2551:
                                                     #0  0x00007fea0f9c2415 pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe04d2 n/a (brave)
                                                     #2  0x00005638b1fe0bc7 n/a (brave)
                                                     #3  0x00005638b1fe09af n/a (brave)
                                                     #4  0x00005638b1f9fe4e n/a (brave)
                                                     #5  0x00005638b1fa06ff n/a (brave)
                                                     #6  0x00005638b1fa0484 n/a (brave)
                                                     #7  0x00005638b1fe4118 n/a (brave)
                                                     #8  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #9  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2543:
                                                     #0  0x00007fea0e28941e epoll_wait (libc.so.6)
                                                     #1  0x00005638b20a878b n/a (brave)
                                                     #2  0x00005638b20a60c1 n/a (brave)
                                                     #3  0x00005638b1fea0c7 n/a (brave)
                                                     #4  0x00005638b1f901c5 n/a (brave)
                                                     #5  0x00005638b1f6997a n/a (brave)
                                                     #6  0x00005638b1faaaae n/a (brave)
                                                     #7  0x00005638b1fe4118 n/a (brave)
                                                     #8  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #9  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2547:
                                                     #0  0x00007fea0f9c277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe05cb n/a (brave)
                                                     #2  0x00005638b1fe0b38 n/a (brave)
                                                     #3  0x00005638b1fe0d41 n/a (brave)
                                                     #4  0x00005638b1f9fe5c n/a (brave)
                                                     #5  0x00005638b1fa06ff n/a (brave)
                                                     #6  0x00005638b1fa0424 n/a (brave)
                                                     #7  0x00005638b1fe4118 n/a (brave)
                                                     #8  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #9  0x00007fea0e2890e3 __clone (libc.so.6)
                                                     
                                                     Stack trace of thread 2546:
                                                     #0  0x00007fea0f9c277c pthread_cond_timedwait@@GLIBC_2.3.2 (libpthread.so.0)
                                                     #1  0x00005638b1fe05cb n/a (brave)
                                                     #2  0x00005638b1fe0b38 n/a (brave)
                                                     #3  0x00005638b1fe0d41 n/a (brave)
                                                     #4  0x00005638b1f9fe5c n/a (brave)
                                                     #5  0x00005638b1fa06ff n/a (brave)
                                                     #6  0x00005638b1fa0424 n/a (brave)
                                                     #7  0x00005638b1fe4118 n/a (brave)
                                                     #8  0x00007fea0f9bc57f start_thread (libpthread.so.0)
                                                     #9  0x00007fea0e2890e3 __clone (libc.so.6)
Sep 21 14:57:50 arch-desktop systemd[1]: systemd-coredump@1-2625-0.service: Succeeded.
Sep 21 14:57:50 arch-desktop kernel: audit: type=1131 audit(1569067070.756:206): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-2625-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:57:50 arch-desktop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-2625-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 21 14:58:06 arch-desktop systemd-networkd[434]: vnet0: Lost carrier
Sep 21 14:58:06 arch-desktop kernel: virbr1: port 2(vnet0) entered disabled state
Sep 21 14:58:06 arch-desktop audit: ANOM_PROMISCUOUS dev=vnet0 prom=0 old_prom=256 auid=4294967295 uid=65534 gid=992 ses=4294967295
Sep 21 14:58:06 arch-desktop kernel: device vnet0 left promiscuous mode
Sep 21 14:58:06 arch-desktop kernel: virbr1: port 2(vnet0) entered disabled state
Sep 21 14:58:06 arch-desktop kernel: audit: type=1700 audit(1569067086.770:207): dev=vnet0 prom=0 old_prom=256 auid=4294967295 uid=65534 gid=992 ses=4294967295
Sep 21 14:58:06 arch-desktop systemd-networkd[434]: rtnl: received neighbor for link '5' we don't know about, ignoring.
Sep 21 14:58:06 arch-desktop systemd-networkd[434]: rtnl: received neighbor for link '5' we don't know about, ignoring.
Sep 21 14:58:06 arch-desktop systemd-networkd[434]: virbr1: Lost carrier
Sep 21 14:58:06 arch-desktop NetworkManager[605]: <info>  [1569067086.7909] device (vnet0): state change: disconnected -> unmanaged (reason 'unmanaged', sys-iface-state: 'removed')
Sep 21 14:58:06 arch-desktop NetworkManager[605]: <info>  [1569067086.7920] device (vnet0): released from master device virbr1
Sep 21 14:58:06 arch-desktop libvirtd[663]: internal error: End of file from qemu monitor
Sep 21 14:58:07 arch-desktop systemd[1]: machine-qemu\x2d1\x2dwin10.scope: Succeeded.
Sep 21 14:58:07 arch-desktop systemd-machined[607]: Machine qemu-1-win10 terminated.
Sep 21 14:58:08 arch-desktop audit[663]: VIRT_CONTROL pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm op=stop reason=shutdown vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 vm-pid=-1 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:58:08 arch-desktop kernel: audit: type=2500 audit(1569067088.013:208): pid=663 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm op=stop reason=shutdown vm="win10" uuid=a832691a-c513-4d34-a939-d67bb0f567e0 vm-pid=-1 exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success'
Sep 21 14:58:18 arch-desktop kernel: usb 1-3: USB disconnect, device number 2
Sep 21 14:58:19 arch-desktop systemd-udevd[2672]: 1-3: Failed to process device, ignoring: No such file or directory
Sep 21 14:58:20 arch-desktop kernel: usb 1-3: new full-speed USB device number 4 using xhci_hcd
Sep 21 14:58:20 arch-desktop kernel: usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
Sep 21 14:58:20 arch-desktop kernel: usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 21 14:58:20 arch-desktop kernel: usb 1-3: Product: USB Receiver
Sep 21 14:58:20 arch-desktop kernel: usb 1-3: Manufacturer: Logitech
Sep 21 14:58:20 arch-desktop kernel: logitech-djreceiver 0003:046D:C52B.0015: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
Sep 21 14:58:21 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0016: HID++ 4.5 device connected.
Sep 21 14:58:21 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0016: HID++ 4.5 device connected.
Sep 21 14:58:21 arch-desktop upowerd[1744]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0015/0003:046D:4069.0016/power_supply/hidpp_battery_6
Sep 21 14:58:22 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0016: multiplier = 8
Sep 21 14:58:22 arch-desktop kernel: input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0015/0003:046D:4069.0016/input/input48
Sep 21 14:58:22 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0016: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
Sep 21 14:58:22 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0016: multiplier = 8
Sep 21 14:58:22 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event6 (Logitech MX Master 2S)
Sep 21 14:58:22 arch-desktop upowerd[1744]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0015/0003:046D:4069.0016/power_supply/hidpp_battery_5
Sep 21 14:58:30 arch-desktop kernel: usb 1-5: USB disconnect, device number 3
Sep 21 14:58:31 arch-desktop systemd-udevd[2701]: 1-5: Failed to process device, ignoring: No such file or directory
Sep 21 14:58:32 arch-desktop kernel: usb 1-5: new full-speed USB device number 5 using xhci_hcd
Sep 21 14:58:32 arch-desktop kernel: usb 1-5: New USB device found, idVendor=046d, idProduct=c33a, bcdDevice=14.00
Sep 21 14:58:32 arch-desktop kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 21 14:58:32 arch-desktop kernel: usb 1-5: Product: G413 Carbon Mechanical Gaming Keyboard
Sep 21 14:58:32 arch-desktop kernel: usb 1-5: Manufacturer: Logitech
Sep 21 14:58:32 arch-desktop kernel: usb 1-5: SerialNumber: 037B385E3638
Sep 21 14:58:32 arch-desktop kernel: input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C33A.0017/input/input49
Sep 21 14:58:32 arch-desktop kernel: hid-generic 0003:046D:C33A.0017: input,hidraw2: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input0
Sep 21 14:58:32 arch-desktop kernel: input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.0018/input/input50
Sep 21 14:58:32 arch-desktop kernel: input: Logitech G413 Carbon Mechanical Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C33A.0018/input/input51
Sep 21 14:58:32 arch-desktop kernel: hid-generic 0003:046D:C33A.0018: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-5/input1
Sep 21 14:58:32 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event3 (Logitech G413 Carbon Mechanical Gaming Keyboard)
Sep 21 14:58:32 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event4 (Logitech G413 Carbon Mechanical Gaming Keyboard)
Sep 21 14:58:34 arch-desktop kernel: usb 1-3: USB disconnect, device number 4
Sep 21 14:58:34 arch-desktop systemd-udevd[2718]: 1-3: Failed to process device, ignoring: No such file or directory
Sep 21 14:58:36 arch-desktop kernel: usb 1-3: new full-speed USB device number 6 using xhci_hcd
Sep 21 14:58:36 arch-desktop kernel: usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
Sep 21 14:58:36 arch-desktop kernel: usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 21 14:58:36 arch-desktop kernel: usb 1-3: Product: USB Receiver
Sep 21 14:58:36 arch-desktop kernel: usb 1-3: Manufacturer: Logitech
Sep 21 14:58:36 arch-desktop kernel: logitech-djreceiver 0003:046D:C52B.001B: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
Sep 21 14:58:37 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.001C: HID++ 4.5 device connected.
Sep 21 14:58:37 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.001C: HID++ 4.5 device connected.
Sep 21 14:58:37 arch-desktop upowerd[1744]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.001B/0003:046D:4069.001C/power_supply/hidpp_battery_8
Sep 21 14:58:37 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.001C: multiplier = 8
Sep 21 14:58:37 arch-desktop kernel: input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.001B/0003:046D:4069.001C/input/input54
Sep 21 14:58:37 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.001C: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
Sep 21 14:58:37 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.001C: multiplier = 8
Sep 21 14:58:37 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event6 (Logitech MX Master 2S)
Sep 21 14:58:37 arch-desktop upowerd[1744]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.001B/0003:046D:4069.001C/power_supply/hidpp_battery_7
Sep 21 14:58:46 arch-desktop kernel: usb 1-3: USB disconnect, device number 6
Sep 21 14:58:47 arch-desktop systemd-udevd[2783]: 1-3: Failed to process device, ignoring: No such file or directory
Sep 21 14:58:48 arch-desktop kernel: usb 1-3: new full-speed USB device number 7 using xhci_hcd
Sep 21 14:58:48 arch-desktop kernel: usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
Sep 21 14:58:48 arch-desktop kernel: usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 21 14:58:48 arch-desktop kernel: usb 1-3: Product: USB Receiver
Sep 21 14:58:48 arch-desktop kernel: usb 1-3: Manufacturer: Logitech
Sep 21 14:58:48 arch-desktop kernel: logitech-djreceiver 0003:046D:C52B.001F: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
Sep 21 14:58:49 arch-desktop kernel: input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.001F/0003:046D:4069.0020/input/input55
Sep 21 14:58:49 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0020: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:1
Sep 21 14:58:49 arch-desktop systemd-logind[653]: Watching system buttons on /dev/input/event6 (Logitech MX Master 2S)
Sep 21 14:58:49 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0020: HID++ 4.5 device connected.
Sep 21 14:58:49 arch-desktop upowerd[1744]: treating change event as add on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.001F/0003:046D:4069.0020/power_supply/hidpp_battery_9
Sep 21 14:58:49 arch-desktop kernel: logitech-hidpp-device 0003:046D:4069.0020: multiplier = 8

Last edited by cpoul (2019-09-21 12:19:20)

Swiggles · 2019-09-21 14:07:12

On an unrelated note, you should fix your command line you specify root twice. And brave is segfaulting all over the place.

I don't see anything wrong with the behavior on detach unless you somehow rely on the input path which changes each time.
This leads me to my next question: Have you checked xev/evtest for any output?

I found a few scattered references where the onboard profiles stop working for regular KVM switches without a power cycle on some Logitech hardware, maybe an idea to explore if neither of my previous ideas work.

Edit: One more thing I don't usually like to ask, but splice/synergy/barrier or other similar tools/interfaces do not fit your needs instead? Personally I prefer them, but there are valid reasons not to use them.

Last edited by Swiggles (2019-09-21 14:13:00)

cpoul · 2019-09-21 15:14:42

Yeah I checked xev and it didn't respond to the malfunctioning keys/buttons.

I kept evdev/barrier etc as my last card, because of the mouse. That mouse has horizontal thumb scroll which is a huge productivity booster in software with timelines (like video editors), spreadsheets and whatever needs huge horizontal overflow. Moreover, is very gesture oriented, programmable with Logitech software. While on Linux, I don't care about the mouse because I use keyboard exclusively, but on Windows is a different story.

This mouse has 7 buttons, will barrier/spice be able to map those? At least the middle click, forward and backward and if possible the horizontal scroll too (I think up dir shows Button 6, down dir shows Button 7)

I don't care about the keyboard because the only extra feature it has, is the backlight, thus I don't mind using those tools just for the keyboard.

Would you mind share your refs? Do they provide any workarounds?

thank you for your notices

Last edited by cpoul (2019-09-21 15:16:50)

Swiggles · 2019-09-21 15:38:11

Yes, sorry. I don't think they are any useful. They just gave insight that there might be some issue with the onboard profile memory of the hardware:
https://community.xim.tech/index.php?topic=44202.0
https://superuser.com/questions/1157784 … kvm-switch

I use synergy, but since barrier is a fork I would expect the same features and more: You can easily map all your mouse buttons to their equivalent in Windows. For the back and forward on my mouse (G203) I had to add some mapping, but this is all:

section: options
mousebutton(6) = mousebutton(4)
mousebutton(7) = mousebutton(5)
end

So I would call it close to out of the box.

For spice it is a bit more complicated, because support has been added in newer versions, but I don't know how good it really works. I never bothered to fix mine, but I suspect it is the same issue as with synergy where the mapping is just not correct.

Additionally to configure your mouse there is the piper project. It works with many Logitech mice and although I have not seen a config file for yours they look simple enough to add. Edit: Yours is supported there, I missed it.

Last edited by Swiggles (2019-09-21 15:49:29)

cpoul · 2019-09-21 17:22:29

!!! What a gem piper is !!! (unfortunately it throws a few errors but I don't have time to debug it)

I just installed and set up Barrier and I must say it works wonderfully. Horizontal scroll works out of the box + all the other buttons except one (which doesn't work on Linux too). I can live without gestures, the response is absolutely perfect. Now my system is most solid than ever. I've lost countless hours on how to pass through the physical devices, and at the end you're right. IMO it doesn't worth the hassle anymore.

Maybe some day I'll be able to achieve it, but I can finally do my work now.

many thanks for your time

Swiggles · 2019-09-21 17:39:32

I linked to the project page of piper, but it is available in Community. If it doesn't work please consider opening another thread so we can investigate. Maybe it could actually solve your missing button issue.

I am glad there is at least a partial fix for your problem by using barrier!
Btw my favorite feature you cannot achieve with passthrough is copy and paste support between systems, give it a try. Edit: looks like the other tools are getting much better than expected.

You are very welcome.

Last edited by Swiggles (2019-09-21 17:43:20)

cpoul · 2019-09-21 17:41:01

Will do soon

FYI I have spice guest tools installed in guest and clipboard worked fine without barrier/synergy

Arch Linux

#1 2019-09-21 09:48:47

(libvirt) Attaching input devices back to arch, end up semi functional

#2 2019-09-21 11:43:56

Re: (libvirt) Attaching input devices back to arch, end up semi functional

#3 2019-09-21 12:17:48

Re: (libvirt) Attaching input devices back to arch, end up semi functional

#4 2019-09-21 14:07:12

Re: (libvirt) Attaching input devices back to arch, end up semi functional

#5 2019-09-21 15:14:42

Re: (libvirt) Attaching input devices back to arch, end up semi functional

#6 2019-09-21 15:38:11

Re: (libvirt) Attaching input devices back to arch, end up semi functional

#7 2019-09-21 17:22:29

Re: (libvirt) Attaching input devices back to arch, end up semi functional

#8 2019-09-21 17:39:32

Re: (libvirt) Attaching input devices back to arch, end up semi functional

#9 2019-09-21 17:41:01

Re: (libvirt) Attaching input devices back to arch, end up semi functional

Board footer