You are not logged in.

Pages: 1

#1 2019-09-25 12:31:48

Shenron
Member
Registered: 2015-05-20
Posts: 11

[SOLVED] Zephyrus S GX502 - headphone not detected

Hello,

I'm trying to install Archlinux on this laptop: Zephyrus S GX502GW-XB76
Almost everything works out of the box but my headphone is not detected. Only speakers works, I tried with linux-lts and linux. If I list output available on pavucontrol I have only "Speakers". On Windows 10 I have no problem with audio.

By the way, I think it's a details, but on this laptop there are two jack; one for microphone and one for the headphone. The microphone seams to be detected.

If I look alsamixer, the name of the sound card is:
Card: HDA Intel PCH
Chip: Realtek ALC294

Some output informations:

sudo fuser -v /dev/snd/*

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  tcy        1912 F.... pulseaudio
/dev/snd/controlC1:  tcy        1912 F.... pulseaudio

amixer -c0

Simple mixer control 'Master',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 70 [80%] [-12.75dB] [on]
  Front Right: Playback 70 [80%] [-12.75dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 3 [100%] [30.00dB]
  Front Right: 3 [100%] [30.00dB]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 63
  Front Left: Capture 63 [100%] [30.00dB] [off]
  Front Right: Capture 63 [100%] [30.00dB] [off]

pacmd list-cards

2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_01_00.1>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xa4080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "10f9"
		device.product.name = "TU106 High Definition Audio Controller"
		device.string = "1"
		device.description = "TU106 High Definition Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <off>
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.pci-0000_00_1f.3>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa4518000 irq 170"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1f.3.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
		alsa_input.pci-0000_00_1f.3.analog-stereo/#1: Built-in Audio Analog Stereo
	ports:
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"

pacmd list-sinks

1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9039
	volume: front-left: 39881 /  61% / -12.94 dB,   front-right: 39881 /  61% / -12.94 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 1 <alsa_card.pci-0000_00_1f.3>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC294 Analog"
		alsa.id = "ALC294 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa4518000 irq 170"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC294"
		alsa.components = "HDA:10ec0294,10431881,00100004"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
	active port: <analog-output-speaker>

Think you very much smile

Last edited by Shenron (2020-10-14 19:50:19)

Offline

#2 2019-09-25 14:18:41

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,196

Re: [SOLVED] Zephyrus S GX502 - headphone not detected

Output of alsa-info.sh ? this link claims that there might be relations to Windows holding grabs on the hardware. Ensure you've disabled fast-boot in Windows and do a proper shutdown after having done so. You might want to try a 

sudo alsactl init

to force a reset of the soundcard registers.

Offline

#3 2019-09-25 14:35:36

Shenron
Member
Registered: 2015-05-20
Posts: 11

Re: [SOLVED] Zephyrus S GX502 - headphone not detected

Thank you for your answer.

I do everything same result ... only speakers available. I had an error with

sudo alsactl init

alsactl: sysfs_init:48: sysfs path '/sys' is invalid

Found hardware: "HDA-Intel" "Realtek ALC294" "HDA:10ec0294,10431881,00100004" "0x1043" "0x1881"
Hardware is initialized using a generic method

Content of `alsa-info.sh`

#!/bin/bash

SCRIPT_VERSION=0.4.64
CHANGELOG="http://www.alsa-project.org/alsa-info.sh.changelog"

#################################################################################
#Copyright (C) 2007 Free Software Foundation.

#This program is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2 of the License, or
#(at your option) any later version.

#This program is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#GNU General Public License for more details.

#You should have received a copy of the GNU General Public License
#along with this program; if not, write to the Free Software
#Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.

##################################################################################

# The script was written for 2 main reasons:
#  1. Remove the need for the devs/helpers to ask several questions before we can easily help the user.
#  2. Allow newer/inexperienced ALSA users to give us all the info we need to help them.

#Set the locale (this may or may not be a good idea.. let me know)
export LC_ALL=C

# Change the PATH variable, so we can run lspci (needed for some distros)
PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin
BGTITLE="ALSA-Info v $SCRIPT_VERSION"
PASTEBINKEY="C9cRIO8m/9y8Cs0nVs0FraRx7U0pHsuc"

WGET=$(which wget 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null)
REQUIRES="mktemp grep pgrep whereis ping awk date uname cat dmesg amixer alsactl"

#
# Define some simple functions
#

pbcheck() {
	[[ $UPLOAD = "no" ]] && return

	if [[ -z $PASTEBIN ]]; then
		[[ $(ping -c1 www.alsa-project.org) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
	else
		[[ $(ping -c1 www.pastebin.ca) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
	fi
}

update() {
	test -z "$WGET" -o ! -x "$WGET" && return

	SHFILE=$(mktemp -t alsa-info.XXXXXXXXXX) || exit 1
	wget -O $SHFILE "http://www.alsa-project.org/alsa-info.sh" >/dev/null 2>&1
	REMOTE_VERSION=$(grep SCRIPT_VERSION $SHFILE | head -n1 | sed 's/.*=//')
	if [ -s "$SHFILE" -a "$REMOTE_VERSION" != "$SCRIPT_VERSION" ]; then
		if [[ -n $DIALOG ]]
		then
			OVERWRITE=
			if [ -w $0 ]; then
				dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to install it?\nNOTICE: The original file $0 will be overwritten!" 0 0
				DIALOG_EXIT_CODE=$?
				if [[ $DIALOG_EXIT_CODE = 0 ]]; then
				  OVERWRITE=yes
				fi
			fi
			if [ -z "$OVERWRITE" ]; then
				dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to download it?" 0 0
				DIALOG_EXIT_CODE=$?
			fi
			if [[ $DIALOG_EXIT_CODE = 0 ]]
			then
				echo "Newer version detected: $REMOTE_VERSION"
				echo "To view the ChangeLog, please visit $CHANGELOG"
				if [ "$OVERWRITE" = "yes" ]; then
					cp $SHFILE $0
					echo "ALSA-Info script has been updated to v $REMOTE_VERSION"
					echo "Please re-run the script"
					rm $SHFILE 2>/dev/null
				else
					echo "ALSA-Info script has been downloaded as $SHFILE."
					echo "Please re-run the script from new location."
				fi
				exit
			else
				rm $SHFILE 2>/dev/null
			fi
		else
			echo "Newer version detected: $REMOTE_VERSION"
			echo "To view the ChangeLog, please visit $CHANGELOG"
			if [ -w $0 ]; then
				echo "The original file $0 will be overwritten!"
				echo -n "If you do not like to proceed, press Ctrl-C now.." ; read inp
				cp $SHFILE $0
				echo "ALSA-Info script has been updated. Please re-run it."
				rm $SHFILE 2>/dev/null
			else
				echo "ALSA-Info script has been downloaded $SHFILE."
				echo "Please, re-run it from new location."
			fi
			exit
		fi
	else
		rm $SHFILE 2>/dev/null
	fi
}

cleanup() {
	if [ -n "$TEMPDIR" -a "$KEEP_FILES" != "yes" ]; then
		rm -rf "$TEMPDIR" 2>/dev/null
	fi
	test -n "$KEEP_OUTPUT" || rm -f "$NFILE"
}


withaplay() {
        echo "!!Aplay/Arecord output" >> $FILE
        echo "!!--------------------" >> $FILE
        echo "" >> $FILE
       	echo "APLAY" >> $FILE
	echo "" >> $FILE 
	aplay -l >> $FILE 2>&1
        echo "" >> $FILE
       	echo "ARECORD" >> $FILE
	echo "" >> $FILE
	arecord -l >> $FILE 2>&1
	echo "" >> $FILE
}

withlsmod() {
	echo "!!All Loaded Modules" >> $FILE
	echo "!!------------------" >> $FILE
	echo "" >> $FILE
	lsmod | awk '{print $1}' >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
}

withamixer() {
        echo "!!Amixer output" >> $FILE
        echo "!!-------------" >> $FILE
        echo "" >> $FILE
	for i in $(grep "]: " /proc/asound/cards | awk -F ' ' '{ print $1 }') ; do
		CARD_NAME=$(grep "^ *$i " $TEMPDIR/alsacards.tmp | awk '{ print $2 }')
		echo "!!-------Mixer controls for card $i $CARD_NAME]" >> $FILE
		echo "" >>$FILE
		amixer -c$i info >> $FILE 2>&1
		amixer -c$i >> $FILE 2>&1
		echo "" >> $FILE
	done
	echo "" >> $FILE
}

withalsactl() {
	echo "!!Alsactl output" >> $FILE
        echo "!!--------------" >> $FILE
        echo "" >> $FILE
	alsactl -f $TEMPDIR/alsactl.tmp store
	echo "--startcollapse--" >> $FILE
	cat $TEMPDIR/alsactl.tmp >> $FILE
	echo "--endcollapse--" >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
}

withdevices() {
        echo "!!ALSA Device nodes" >> $FILE
        echo "!!-----------------" >> $FILE
        echo "" >> $FILE
        ls -la /dev/snd/* >> $FILE
        echo "" >> $FILE
        echo "" >> $FILE
}

withconfigs() {
if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]] || [[ -e $HOME/.asoundrc.asoundconf ]]; then
        echo "!!ALSA configuration files" >> $FILE
        echo "!!------------------------" >> $FILE
        echo "" >> $FILE

        #Check for ~/.asoundrc
        if [[ -e $HOME/.asoundrc ]]
        then
                echo "!!User specific config file (~/.asoundrc)" >> $FILE
                echo "" >> $FILE
                cat $HOME/.asoundrc >> $FILE
                echo "" >> $FILE
                echo "" >> $FILE
        fi
	#Check for .asoundrc.asoundconf (seems to be Ubuntu specific)
	if [[ -e $HOME/.asoundrc.asoundconf ]]
	then
		echo "!!asoundconf-generated config file" >> $FILE
		echo "" >> $FILE
		cat $HOME/.asoundrc.asoundconf >> $FILE
		echo "" >> $FILE
		echo "" >> $FILE
	fi
        #Check for /etc/asound.conf
        if [[ -e /etc/asound.conf ]]
        then
                echo "!!System wide config file (/etc/asound.conf)" >> $FILE
                echo "" >> $FILE
                cat /etc/asound.conf >> $FILE
                echo "" >> $FILE
                echo "" >> $FILE
        fi
fi
}

withsysfs() {
    local i f
    local printed=""
    for i in /sys/class/sound/*; do
	case "$i" in
	    */hwC?D?)
		if [ -f $i/init_pin_configs ]; then
		    if [ -z "$printed" ]; then
			echo "!!Sysfs Files" >> $FILE
			echo "!!-----------" >> $FILE
			echo "" >> $FILE
		    fi
		    for f in init_pin_configs driver_pin_configs user_pin_configs init_verbs hints; do
			echo "$i/$f:" >> $FILE
			cat $i/$f >> $FILE
			echo >> $FILE
		    done
		    printed=yes
		fi
		;;
	    esac
    done
    if [ -n "$printed" ]; then
	echo "" >> $FILE
    fi
}

withdmesg() {
	echo "!!ALSA/HDA dmesg" >> $FILE
	echo "!!--------------" >> $FILE
	echo "" >> $FILE
	dmesg | grep -C1 -E 'ALSA|HDA|HDMI|snd[_-]|sound|hda.codec|hda.intel' >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
}

withall() {
	withdevices
	withconfigs
	withaplay
	withamixer
	withalsactl
	withlsmod
	withsysfs
	withdmesg
	WITHALL="no"
}

get_alsa_library_version() {
	ALSA_LIB_VERSION=$(grep VERSION_STR /usr/include/alsa/version.h 2>/dev/null | awk '{ print $3 }' | sed 's/"//g')

	if [ -z "$ALSA_LIB_VERSION" ]; then
		if [ -f /etc/lsb-release ]; then
			. /etc/lsb-release
			case "$DISTRIB_ID" in
				Ubuntu)
					if which dpkg > /dev/null ; then
						ALSA_LIB_VERSION=$(dpkg -l libasound2 | tail -1 | awk '{ print $3 }' | cut -f 1 -d -)
					fi

					if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
						ALSA_LIB_VERSION=""
					fi
					return
					;;
				*)
					return
					;;
			esac
		elif [ -f /etc/debian_version ]; then
			if which dpkg > /dev/null ; then
				ALSA_LIB_VERSION=$(dpkg -l libasound2 | tail -1 | awk '{ print $3 }' | cut -f 1 -d -)
			fi

			if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
				ALSA_LIB_VERSION=""
			fi
			return
		fi
	fi
}

# Basic requires
for prg in $REQUIRES; do
  t=$(which $prg 2> /dev/null)
  if test -z "$t"; then
    echo "This script requires $prg utility to continue."
    exit 1
  fi
done

# Run checks to make sure the programs we need are installed.
LSPCI=$(which lspci 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null);
TPUT=$(which tput 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null);
DIALOG=$(which dialog 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null);

# Check to see if sysfs is enabled in the kernel. We'll need this later on
SYSFS=$(mount | grep sysfs | awk '{ print $3 }');

# Check modprobe config files for sound related options
SNDOPTIONS=$(modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p')

KEEP_OUTPUT=
NFILE=""

PASTEBIN=""
WWWSERVICE="www.alsa-project.org"
WELCOME="yes"
PROCEED="yes"
UPLOAD="ask"
REPEAT=""
while [ -z "$REPEAT" ]; do
REPEAT="no"
case "$1" in
	--update|--help|--about)
		WELCOME="no"
		PROCEED="no"
		;;
	--upload)
		UPLOAD="yes"
		WELCOME="no"
		;;
	--no-upload)
		UPLOAD="no"
		WELCOME="no"
		;;
	--pastebin)
		PASTEBIN="yes"
		WWWSERVICE="pastebin"
		;;
	--no-dialog)
		DIALOG=""
		REPEAT=""
		shift
		;;
	--stdout)
		DIALOG=""
		UPLOAD="no"
		WELCOME="no"
		TOSTDOUT="yes"
		;;
esac
done


#Script header output.
if [ "$WELCOME" = "yes" ]; then
greeting_message="\

This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.

  dmesg
  lspci
  lsmod
  aplay
  amixer
  alsactl
  /proc/asound/
  /sys/class/sound/
  ~/.asoundrc (etc.)

See '$0 --help' for command line options.
"
if [ -n "$DIALOG" ]; then
	dialog  --backtitle "$BGTITLE" \
		--title "ALSA-Info script v $SCRIPT_VERSION" \
		--msgbox "$greeting_message" 20 80
else
	echo "ALSA Information Script v $SCRIPT_VERSION"
	echo "--------------------------------"
	echo "$greeting_message"
fi # dialog
fi # WELCOME

# Set the output file
TEMPDIR=$(mktemp -t -d alsa-info.XXXXXXXXXX) || exit 1
FILE="$TEMPDIR/alsa-info.txt"
if [ -z "$NFILE" ]; then
	NFILE=$(mktemp -t alsa-info.txt.XXXXXXXXXX) || exit 1
fi

trap cleanup 0

if [ "$PROCEED" = "yes" ]; then

if [ -z "$LSPCI" ]; then
	if [ -d /sys/bus/pci ]; then
		echo "This script requires lspci. Please install it, and re-run this script."
		exit 0
	fi
fi

# Fetch the info and store in temp files/variables
TSTAMP=$(LANG=C TZ=UTC date)
DISTRO=$(grep -ihs "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slackware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Vector\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexenta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackTrack\|KateOS\|Pardus" /etc/{issue,*release,*version})
KERNEL_VERSION=$(uname -r)
KERNEL_PROCESSOR=$(uname -p)
KERNEL_MACHINE=$(uname -m)
KERNEL_OS=$(uname -o)
[[ $(uname -v | grep SMP) ]] && KERNEL_SMP="Yes" || KERNEL_SMP="No"
ALSA_DRIVER_VERSION=$(cat /proc/asound/version | head -n1 | awk '{ print $7 }' | sed 's/\.$//')
get_alsa_library_version
ALSA_UTILS_VERSION=$(amixer -v | awk '{ print $3 }')

ESDINST=$(which esd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
PAINST=$(which pulseaudio 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
ARTSINST=$(which artsd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
JACKINST=$(which jackd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
ROARINST=$(which roard 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
DMIDECODE=$(which dmidecode 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)

#Check for DMI data
if [ -d /sys/class/dmi/id ]; then
    # No root privileges are required when using sysfs method
    DMI_SYSTEM_MANUFACTURER=$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null)
    DMI_SYSTEM_PRODUCT_NAME=$(cat /sys/class/dmi/id/product_name 2>/dev/null)
    DMI_SYSTEM_PRODUCT_VERSION=$(cat /sys/class/dmi/id/product_version 2>/dev/null)
    DMI_SYSTEM_FIRMWARE_VERSION=$(cat /sys/class/dmi/id/bios_version 2>/dev/null)
    DMI_BOARD_VENDOR=$(cat /sys/class/dmi/id/board_vendor 2>/dev/null)
    DMI_BOARD_NAME=$(cat /sys/class/dmi/id/board_name 2>/dev/null)
elif [ -x $DMIDECODE ]; then
    DMI_SYSTEM_MANUFACTURER=$($DMIDECODE -s system-manufacturer 2>/dev/null)
    DMI_SYSTEM_PRODUCT_NAME=$($DMIDECODE -s system-product-name 2>/dev/null)
    DMI_SYSTEM_PRODUCT_VERSION=$($DMIDECODE -s system-version 2>/dev/null)
    DMI_SYSTEM_FIRMWARE_VERSION=$($DMIDECODE -s bios-version 2>/dev/null)
    DMI_BOARD_VENDOR=$($DMIDECODE -s baseboard-manufacturer 2>/dev/null)
    DMI_BOARD_NAME=$($DMIDECODE -s baseboard-product-name 2>/dev/null)
fi

# Check for ACPI device status
if [ -d /sys/bus/acpi/devices ]; then
    for f in /sys/bus/acpi/devices/*/status; do
	ACPI_STATUS=$(cat $f 2>/dev/null);
	if [[ "$ACPI_STATUS" -ne 0 ]]; then
	    echo $f $'\t' $ACPI_STATUS >>$TEMPDIR/acpidevicestatus.tmp;
	fi
    done
fi

cat /proc/asound/modules 2>/dev/null | awk '{ print $2 }' > $TEMPDIR/alsamodules.tmp
cat /proc/asound/cards > $TEMPDIR/alsacards.tmp
if [[ ! -z "$LSPCI" ]]; then
  lspci | grep -i "multi\|audio">$TEMPDIR/lspci.tmp
fi

#Check for HDA-Intel cards codec#*
cat /proc/asound/card*/codec\#* > $TEMPDIR/alsa-hda-intel.tmp 2> /dev/null

#Check for AC97 cards codec
cat /proc/asound/card*/codec97\#0/ac97\#0-0 > $TEMPDIR/alsa-ac97.tmp 2> /dev/null
cat /proc/asound/card*/codec97\#0/ac97\#0-0+regs > $TEMPDIR/alsa-ac97-regs.tmp 2> /dev/null

#Check for USB mixer setup
cat /proc/asound/card*/usbmixer > $TEMPDIR/alsa-usbmixer.tmp 2> /dev/null

#Fetch the info, and put it in $FILE in a nice readable format.
if [[ -z $PASTEBIN ]]; then
echo "upload=true&script=true&cardinfo=" > $FILE
else
echo "name=$USER&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content=" > $FILE
fi
echo "!!################################" >> $FILE
echo "!!ALSA Information Script v $SCRIPT_VERSION" >> $FILE
echo "!!################################" >> $FILE
echo "" >> $FILE
echo "!!Script ran on: $TSTAMP" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Linux Distribution" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo $DISTRO >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!DMI Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
echo "Manufacturer:      $DMI_SYSTEM_MANUFACTURER" >> $FILE
echo "Product Name:      $DMI_SYSTEM_PRODUCT_NAME" >> $FILE
echo "Product Version:   $DMI_SYSTEM_PRODUCT_VERSION" >> $FILE
echo "Firmware Version:  $DMI_SYSTEM_FIRMWARE_VERSION" >> $FILE
echo "Board Vendor:      $DMI_BOARD_VENDOR" >> $FILE
echo "Board Name:        $DMI_BOARD_NAME" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ACPI Device Status Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/acpidevicestatus.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Kernel Information" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo "Kernel release:    $KERNEL_VERSION" >> $FILE
echo "Operating System:  $KERNEL_OS" >> $FILE
echo "Architecture:      $KERNEL_MACHINE" >> $FILE
echo "Processor:         $KERNEL_PROCESSOR" >> $FILE
echo "SMP Enabled:       $KERNEL_SMP" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ALSA Version" >> $FILE
echo "!!------------" >> $FILE
echo "" >> $FILE
echo "Driver version:     $ALSA_DRIVER_VERSION" >> $FILE
echo "Library version:    $ALSA_LIB_VERSION" >> $FILE
echo "Utilities version:  $ALSA_UTILS_VERSION" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Loaded ALSA modules" >> $FILE
echo "!!-------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsamodules.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Sound Servers on this system" >> $FILE
echo "!!----------------------------" >> $FILE
echo "" >> $FILE
if [[ -n $PAINST ]];then
[[ $(pgrep '^(.*/)?pulseaudio$') ]] && PARUNNING="Yes" || PARUNNING="No"
echo "Pulseaudio:" >> $FILE
echo "      Installed - Yes ($PAINST)" >> $FILE
echo "      Running - $PARUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ESDINST ]];then
[[ $(pgrep '^(.*/)?esd$') ]] && ESDRUNNING="Yes" || ESDRUNNING="No"
echo "ESound Daemon:" >> $FILE
echo "      Installed - Yes ($ESDINST)" >> $FILE
echo "      Running - $ESDRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ARTSINST ]];then
[[ $(pgrep '^(.*/)?artsd$') ]] && ARTSRUNNING="Yes" || ARTSRUNNING="No"
echo "aRts:" >> $FILE
echo "      Installed - Yes ($ARTSINST)" >> $FILE
echo "      Running - $ARTSRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $JACKINST ]];then
[[ $(pgrep '^(.*/)?jackd$') ]] && JACKRUNNING="Yes" || JACKRUNNING="No"
echo "Jack:" >> $FILE
echo "      Installed - Yes ($JACKINST)" >> $FILE
echo "      Running - $JACKRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ROARINST ]];then
[[ $(pgrep '^(.*/)?roard$') ]] && ROARRUNNING="Yes" || ROARRUNNING="No"
echo "RoarAudio:" >> $FILE
echo "      Installed - Yes ($ROARINST)" >> $FILE
echo "      Running - $ROARRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -z "$PAINST" && -z "$ESDINST" && -z "$ARTSINST" && -z "$JACKINST" && -z "$ROARINST" ]];then
echo "No sound servers found." >> $FILE
echo "" >> $FILE
fi
echo "" >> $FILE
echo "!!Soundcards recognised by ALSA" >> $FILE
echo "!!-----------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsacards.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE

if [[ ! -z "$LSPCI" ]]; then
echo "!!PCI Soundcards installed in the system" >> $FILE
echo "!!--------------------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/lspci.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Advanced information - PCI Vendor/Device/Subsystem ID's" >> $FILE
echo "!!-------------------------------------------------------" >> $FILE
echo "" >> $FILE
lspci -vvn |grep -A1 040[1-3] >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi

if [ "$SNDOPTIONS" ]
then
echo "!!Modprobe options (Sound related)" >> $FILE
echo "!!--------------------------------" >> $FILE
echo "" >> $FILE
modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p' >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi

if [ -d "$SYSFS" ]; then
	echo "!!Loaded sound module options" >> $FILE
	echo "!!---------------------------" >> $FILE
	echo "" >> $FILE
	for mod in $(cat /proc/asound/modules | awk '{ print $2 }'); do
		echo "!!Module: $mod" >> $FILE
		for params in $(echo $SYSFS/module/$mod/parameters/*); do
			echo -ne "\t"
			value=$(cat $params)
			echo "$params : $value" | sed 's:.*/::'
		done >> $FILE
		echo "" >> $FILE
	done
	echo "" >> $FILE
fi

if [ -s "$TEMPDIR/alsa-hda-intel.tmp" ]; then
	echo "!!HDA-Intel Codec information" >> $FILE
	echo "!!---------------------------" >> $FILE
	echo "--startcollapse--" >> $FILE
	echo "" >> $FILE
	cat $TEMPDIR/alsa-hda-intel.tmp >> $FILE
	echo "--endcollapse--" >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
fi

if [ -s "$TEMPDIR/alsa-ac97.tmp" ]; then
        echo "!!AC97 Codec information" >> $FILE
        echo "!!----------------------" >> $FILE
        echo "--startcollapse--" >> $FILE
        echo "" >> $FILE
        cat $TEMPDIR/alsa-ac97.tmp >> $FILE
        echo "" >> $FILE
        cat $TEMPDIR/alsa-ac97-regs.tmp >> $FILE
        echo "--endcollapse--" >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
fi

if [ -s "$TEMPDIR/alsa-usbmixer.tmp" ]; then
        echo "!!USB Mixer information" >> $FILE
        echo "!!---------------------" >> $FILE
        echo "--startcollapse--" >> $FILE
        echo "" >> $FILE
        cat $TEMPDIR/alsa-usbmixer.tmp >> $FILE
        echo "--endcollapse--" >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
fi

#If no command line options are specified, then run as though --with-all was specified
if [ -z "$1" ]; then
	update
	pbcheck	
fi

fi # proceed

#loop through command line arguments, until none are left.
if [ -n "$1" ]; then
	until [ -z "$1" ]
	do
	case "$1" in
		--pastebin)
		        update
        		pbcheck
			;;
		--update)
			update
			exit
			;;
		--upload)
			UPLOAD="yes"
			;;
		--no-upload)
			UPLOAD="no"
			;;
		--output)
			shift
			NFILE="$1"
			KEEP_OUTPUT="yes"
			;;
		--debug)
			echo "Debugging enabled. $FILE and $TEMPDIR will not be deleted"
			KEEP_FILES="yes"
			echo ""
			;;
		--with-all)
			withall
			;;
		--with-aplay)
			withaplay
			WITHALL="no"
			;;
		--with-amixer)
			withamixer
			WITHALL="no"
			;;
		--with-alsactl)
			withalsactl
			WITHALL="no"
			;;
		--with-devices)
			withdevices
			WITHALL="no"
			;;
		--with-dmesg)
			withdmesg
			WITHALL="no"
			;;
		--with-configs)
			WITHALL="no"
			if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]]
			then
				echo "!!ALSA configuration files" >> $FILE
				echo "!!------------------------" >> $FILE
				echo "" >> $FILE

				#Check for ~/.asoundrc
				if [[ -e $HOME/.asoundrc ]]
				then
					echo "!!User specific config file ($HOME/.asoundrc)" >> $FILE
					echo "" >> $FILE
					cat $HOME/.asoundrc >> $FILE
					echo "" >> $FILE
					echo "" >> $FILE
				fi

				#Check for /etc/asound.conf
				if [[ -e /etc/asound.conf ]]
				then
					echo "!!System wide config file (/etc/asound.conf)" >> $FILE
					echo "" >> $FILE
					cat /etc/asound.conf >> $FILE
					echo "" >> $FILE
					echo "" >> $FILE
				fi
			fi
			;;
		--stdout)
			UPLOAD="no"
			if [ -z "$WITHALL" ]; then
				withall
			fi
			cat $FILE
			rm $FILE
			;;
		--about)
			echo "Written/Tested by the following users of #alsa on irc.freenode.net:"
			echo ""
			echo "	wishie - Script author and developer / Testing"
			echo "	crimsun - Various script ideas / Testing"
			echo "	gnubien - Various script ideas / Testing"
			echo "	GrueMaster - HDA Intel specific items / Testing"
			echo "	olegfink - Script update function"
			echo "  TheMuso - display to stdout functionality"
			exit 0
			;;
		*)
			echo "alsa-info.sh version $SCRIPT_VERSION"
			echo ""
			echo "Available options:"
			echo "	--with-aplay (includes the output of aplay -l)"
			echo "	--with-amixer (includes the output of amixer)"
			echo "	--with-alsactl (includes the output of alsactl)"
			echo "	--with-configs (includes the output of ~/.asoundrc and"
			echo "	    /etc/asound.conf if they exist)" 
			echo "	--with-devices (shows the device nodes in /dev/snd/)"
			echo "	--with-dmesg (shows the ALSA/HDA kernel messages)"
			echo ""
			echo "	--output FILE (specify the file to output for no-upload mode)"
			echo "	--update (check server for script updates)"
			echo "	--upload (upload contents to remote server)"
			echo "	--no-upload (do not upload contents to remote server)"
			echo "	--pastebin (use http://pastebin.ca) as remote server"
			echo "	    instead www.alsa-project.org"
			echo "	--stdout (print alsa information to standard output"
			echo "	    instead of a file)"
			echo "	--about (show some information about the script)"
			echo "	--debug (will run the script as normal, but will not"
			echo "	     delete $FILE)"
			exit 0
			;;
	esac
	shift 1
	done
fi

if [ "$PROCEED" = "no" ]; then
	exit 1
fi

if [ -z "$WITHALL" ]; then
	withall
fi

if [ "$UPLOAD" = "ask" ]; then
	if [ -n "$DIALOG" ]; then
		dialog --backtitle "$BGTITLE" --title "Information collected" --yes-label " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80
		DIALOG_EXIT_CODE=$?
		if [ $DIALOG_EXIT_CODE != 0 ]; then
			UPLOAD="no"
		else
			UPLOAD="yes"
		fi
	else
		echo -n "Automatically upload ALSA information to $WWWSERVICE? [y/N] : "
		read -e CONFIRM
		if [ "$CONFIRM" != "y" ]; then
			UPLOAD="no"
		else
			UPLOAD="yes"
		fi
	fi

fi

if [ "$UPLOAD" = "no" ]; then

	if [ -z "$TOSTDOUT" ]; then
		mv -f $FILE $NFILE || exit 1
		KEEP_OUTPUT="yes"
	fi

	if [[ -n $DIALOG ]]
	then
		if [[ -n $PBERROR ]]; then
			dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "An error occurred while contacting the $WWWSERVICE.\n Your information was NOT automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100
		else
			dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "\n\nYour ALSA information is in $NFILE" 10 60
		fi
	else
		echo

		if [[ -n $PBERROR ]]; then
			echo "An error occurred while contacting the $WWWSERVICE."
			echo "Your information was NOT automatically uploaded."
			echo ""
			echo "Your ALSA information is in $NFILE"
			echo ""
		else
			if [ -z "$TOSTDOUT" ]; then
				echo ""
				echo "Your ALSA information is in $NFILE"
				echo ""
			fi
		fi
	fi

	exit

fi # UPLOAD

# Test that wget is installed, and supports --post-file. Upload $FILE if it does, and prompt user to upload file if it does not.
if [[ -n "${WGET}" ]] && [[ -x "${WGET}" ]] && [[ $(wget --help | grep post-file) ]]
then

if [[ -n $DIALOG ]]
then

if [[ -z $PASTEBIN ]]; then
	wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://www.alsa-project.org/cardinfo-db/" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit"
	{ for i in 10 20 30 40 50 60 70 80 90; do
		echo $i
		sleep 0.2
	done
	echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.alsa-project.org ..." 6 70 0
else
	wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY&encrypt=t&encryptpw=blahblah" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit"
	{ for i in 10 20 30 40 50 60 70 80 90; do
		echo $i
		sleep 0.2
	done
	echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.pastebin.ca ..." 6 70 0
fi

dialog --backtitle "$BGTITLE" --title "Information uploaded" --yesno "Would you like to see the uploaded information?" 5 100 
DIALOG_EXIT_CODE=$?
if [ $DIALOG_EXIT_CODE = 0 ]; then
	grep -v "alsa-info.txt" $FILE > $TEMPDIR/uploaded.txt
	dialog --backtitle "$BGTITLE" --textbox $TEMPDIR/uploaded.txt 0 0
fi

clear

# no dialog
else

if [[ -z $PASTEBIN ]]; then
	echo -n "Uploading information to www.alsa-project.org ... " 
	wget -O - --tries=5 --timeout=60 --post-file=$FILE http://www.alsa-project.org/cardinfo-db/ &>$TEMPDIR/wget.tmp &
else
	echo -n "Uploading information to www.pastebin.ca ... " 
	wget -O - --tries=5 --timeout=60 --post-file=$FILE http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY &>$TEMPDIR/wget.tmp &
fi

#Progess spinner for wget transfer.
i=1
sp="/-\|"
echo -n ' '
while pgrep wget &>/dev/null
do
	echo -en "\b${sp:i++%${#sp}:1}"
done

echo -e "\b Done!"
echo ""

fi # dialog

# See if tput is available, and use it if it is.
if [ -n "$TPUT" ]; then
	if [[ -z $PASTEBIN ]]; then
		FINAL_URL=$(tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2 ; tput sgr0)
	else
		FINAL_URL=$(tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p'; tput sgr0)
	fi
else
	if [[ -z $PASTEBIN ]]; then
		FINAL_URL=$(grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2)
	else
		FINAL_URL=$(grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p')
	fi
fi

# Output the URL of the uploaded file.	
echo "Your ALSA information is located at $FINAL_URL"
echo "Please inform the person helping you."
echo ""

# We couldnt find a suitable wget, so tell the user to upload manually.
else
	mv -f $FILE $NFILE || exit 1
	KEEP_OUTPUT="yes"
	if [[ -z $DIALOG ]]
	then
		if [[ -z $PASTEBIN ]]; then
		echo ""
		echo "Could not automatically upload output to http://www.alsa-project.org"
		echo "Possible reasons are:"
		echo "    1. Couldnt find 'wget' in your PATH"
		echo "    2. Your version of wget is less than 1.8.2"
		echo ""
		echo "Please manually upload $NFILE to http://www.alsa-project.org/cardinfo-db/ and submit your post."
		echo ""
		else
		echo ""
		echo "Could not automatically upload output to http://www.pastebin.ca"
		echo "Possible reasons are:"
		echo "    1. Couldnt find 'wget' in your PATH"
		echo "    2. Your version of wget is less than 1.8.2"
		echo ""
		echo "Please manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post."
		echo ""
		fi
	else
		if [[ -z $PASTEBIN ]]; then
			dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.alsa-project.org.\nPossible reasons are:\n\n    1. Couldn't find 'wget' in your PATH\n    2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.alsa-project,org/cardinfo-db/ and submit your post." 25 100
		else
			dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.pastebin.ca.\nPossible reasons are:\n\n    1. Couldn't find 'wget' in your PATH\n    2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post." 25 100
		fi
	fi
fi

Thank you for your help.

Offline

#4 2019-09-25 14:43:52

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,196

Re: [SOLVED] Zephyrus S GX502 - headphone not detected

No you should run and post the output of alsa-info.sh, it will contain some more outputs. FWIW if alsactl init (don't worry about the error that one is normal, the second message is what's relevant) didn't fix this then you might be able to fix the jack mapping with hdajackretask.

To properly start experimenting with hdajackretask stop pulse first 

systemctl --user mask pulseaudio.socket
systemctl --user stop pulseaudio
hdajackretask

Last edited by V1del (2019-09-25 14:44:24)

Offline

#5 2019-09-25 15:43:12

Shenron
Member
Registered: 2015-05-20
Posts: 11

Re: [SOLVED] Zephyrus S GX502 - headphone not detected

... I'm sorry

/usr/bin/alsa-info.sh

upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.64
!!################################

!!Script ran on: Wed Sep 25 15:31:42 UTC 2019


!!Linux Distribution
!!------------------

Arch Linux \r (\l) NAME="Arch Linux" PRETTY_NAME="Arch Linux" ID=arch HOME_URL="https://www.archlinux.org/" DOCUMENTATION_URL="https://wiki.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/" LOGO=archlinux


!!DMI Information
!!---------------

Manufacturer:      ASUSTeK COMPUTER INC.
Product Name:      Zephyrus S GX502GW_GX502GW
Product Version:   1.0       
Firmware Version:  GX502GW.305
Board Vendor:      ASUSTeK COMPUTER INC.
Board Name:        GX502GW


!!ACPI Device Status Information
!!---------------

/sys/bus/acpi/devices/ACPI000C:00/status 	 15
/sys/bus/acpi/devices/ACPI000E:00/status 	 15
/sys/bus/acpi/devices/ASUS2018:00/status 	 15
/sys/bus/acpi/devices/ATK3001:00/status 	 15
/sys/bus/acpi/devices/ATK4002:00/status 	 15
/sys/bus/acpi/devices/ELAN1205:00/status 	 15
/sys/bus/acpi/devices/INT33A1:00/status 	 15
/sys/bus/acpi/devices/INT3400:00/status 	 15
/sys/bus/acpi/devices/INT3403:00/status 	 15
/sys/bus/acpi/devices/INT3403:02/status 	 15
/sys/bus/acpi/devices/INT340E:00/status 	 15
/sys/bus/acpi/devices/INT3450:00/status 	 15
/sys/bus/acpi/devices/INT3F0D:00/status 	 15
/sys/bus/acpi/devices/LNXPOWER:00/status 	 1
/sys/bus/acpi/devices/LNXPOWER:01/status 	 15
/sys/bus/acpi/devices/LNXPOWER:02/status 	 1
/sys/bus/acpi/devices/LNXPOWER:03/status 	 1
/sys/bus/acpi/devices/LNXPOWER:04/status 	 1
/sys/bus/acpi/devices/LNXPOWER:05/status 	 1
/sys/bus/acpi/devices/MSFT0101:00/status 	 15
/sys/bus/acpi/devices/PNP0103:00/status 	 15
/sys/bus/acpi/devices/PNP0C02:00/status 	 3
/sys/bus/acpi/devices/PNP0C02:03/status 	 3
/sys/bus/acpi/devices/PNP0C02:05/status 	 3
/sys/bus/acpi/devices/PNP0C04:00/status 	 31
/sys/bus/acpi/devices/PNP0C0A:03/status 	 31
/sys/bus/acpi/devices/PNP0C0C:00/status 	 15
/sys/bus/acpi/devices/PNP0C0E:00/status 	 11
/sys/bus/acpi/devices/PNP0C0F:00/status 	 9
/sys/bus/acpi/devices/PNP0C0F:01/status 	 9
/sys/bus/acpi/devices/PNP0C0F:02/status 	 9
/sys/bus/acpi/devices/PNP0C0F:03/status 	 9
/sys/bus/acpi/devices/PNP0C0F:04/status 	 9
/sys/bus/acpi/devices/PNP0C0F:05/status 	 9
/sys/bus/acpi/devices/PNP0C0F:06/status 	 9
/sys/bus/acpi/devices/PNP0C0F:07/status 	 9
/sys/bus/acpi/devices/PRP00001:00/status 	 11
/sys/bus/acpi/devices/USBC000:00/status 	 15
/sys/bus/acpi/devices/device:11/status 	 15


!!Kernel Information
!!------------------

Kernel release:    4.19.75-1-lts
Operating System:  GNU/Linux
Architecture:      x86_64
Processor:         unknown
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     k4.19.75-1-lts
Library version:    1.1.9
Utilities version:  1.1.9


!!Loaded ALSA modules
!!-------------------

snd_hda_intel
snd_hda_intel


!!Sound Servers on this system
!!----------------------------

Pulseaudio:
      Installed - Yes (/usr/bin/pulseaudio)
      Running - No

Jack:
      Installed - Yes (/usr/bin/jackd)
      Running - No


!!Soundcards recognised by ALSA
!!-----------------------------

 0 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xa4518000 irq 156
 1 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xa4080000 irq 17


!!PCI Soundcards installed in the system
!!--------------------------------------

00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
01:00.1 Audio device: NVIDIA Corporation TU106 High Definition Audio Controller (rev a1)


!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------

00:1f.3 0403: 8086:a348 (rev 10)
	Subsystem: 1043:1881
--
01:00.1 0403: 10de:10f9 (rev a1)
	Subsystem: 1043:1891


!!Loaded sound module options
!!---------------------------

!!Module: snd_hda_intel
	align_buffer_size : -1
	bdl_pos_adj : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable_msi : -1
	id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	pm_blacklist : Y
	position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	power_save : 0
	power_save_controller : Y
	probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	single_cmd : -1
	snoop : -1

!!Module: snd_hda_intel
	align_buffer_size : -1
	bdl_pos_adj : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable_msi : -1
	id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	pm_blacklist : Y
	position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	power_save : 0
	power_save_controller : Y
	probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	single_cmd : -1
	snoop : -1


!!HDA-Intel Codec information
!!---------------------------
--startcollapse--

Codec: Realtek ALC294
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0294
Subsystem Id: 0x10431881
Revision Id: 0x100004
No Modem Function Group found
Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 D3cold CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Master Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC294 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x3c 0x3c]
  Converter: stream=1, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x57 0x57]
  Converter: stream=0, channel=0
  PCM:
    rates [0x60]: 44100 48000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x411: Stereo
  Converter: stream=0, channel=0
  PCM:
    rates [0x40]: 48000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC294 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x27 0x27]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x24
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22
Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x1f
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Control: name="Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x90a60120: [Fixed] Mic at Int N/A
    Conn = Digital, Color = Unknown
    DefAssociation = 0x2, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00010010: OUT EAPD
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x02
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 3
     0x02* 0x03 0x06
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00010014: OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x02* 0x03
Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Master Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 3
     0x02* 0x03 0x06
Node 0x18 [Pin Complex] wcaps 0x400481: Stereo
  Pincap 0x00000024: IN Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00: VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00013734: IN OUT EAPD Detect
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x02* 0x03
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
  Pincap 0x00000020: IN
  Pin Default 0x40600001: [N/A] Modem Line at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x1
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x00000014: OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x06
Node 0x1f [Pin Complex] wcaps 0x400681: Stereo Digital
  Pincap 0x00000024: IN Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=130
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x02 0x03*
Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x19* 0x1a 0x1b 0x12
Node 0x23 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x19* 0x1a 0x1b 0x13
Node 0x24 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 3
     0x12* 0x13 0x18
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Nvidia GPU 93 HDMI/DP
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de0093
Subsystem Id: 0x10431891
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
  Pincap 0x09000094: OUT Detect HBR HDMI DP
  Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Connection: 4
     0x08* 0x09 0x0a 0x0b
Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
  Pincap 0x09000094: OUT Detect HBR HDMI DP
  Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Connection: 4
     0x08* 0x09 0x0a 0x0b
Node 0x06 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Pincap 0x09000094: OUT Detect HBR HDMI DP
  Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=01, enabled=1
  Connection: 4
     0x08* 0x09 0x0a 0x0b
Node 0x07 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
  Control: name="IEC958 Playback Con Mask", index=1, device=0
  Control: name="IEC958 Playback Pro Mask", index=1, device=0
  Control: name="IEC958 Playback Default", index=1, device=0
  Control: name="IEC958 Playback Switch", index=1, device=0
  Pincap 0x09000094: OUT Detect HBR HDMI DP
  Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=02, enabled=1
  Connection: 4
     0x08* 0x09 0x0a 0x0b
Node 0x08 [Audio Output] wcaps 0x62b1: 8-Channels Digital Stripe
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Unsolicited: tag=00, enabled=0
Node 0x09 [Audio Output] wcaps 0x62b1: 8-Channels Digital Stripe
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Unsolicited: tag=00, enabled=0
Node 0x0a [Audio Output] wcaps 0x62b1: 8-Channels Digital Stripe
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Unsolicited: tag=00, enabled=0
Node 0x0b [Audio Output] wcaps 0x62b1: 8-Channels Digital Stripe
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Unsolicited: tag=00, enabled=0
--endcollapse--


!!ALSA Device nodes
!!-----------------

crw-rw----+ 1 root audio 116,  5 Sep 25 17:28 /dev/snd/controlC0
crw-rw----+ 1 root audio 116,  9 Sep 25 17:28 /dev/snd/controlC1
crw-rw----+ 1 root audio 116,  4 Sep 25 17:28 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116,  8 Sep 25 17:28 /dev/snd/hwC1D0
crw-rw----+ 1 root audio 116,  3 Sep 25 17:28 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116,  2 Sep 25 17:30 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116,  6 Sep 25 17:28 /dev/snd/pcmC1D3p
crw-rw----+ 1 root audio 116,  7 Sep 25 17:28 /dev/snd/pcmC1D7p
crw-rw----+ 1 root audio 116,  1 Sep 25 17:28 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Sep 25 17:28 /dev/snd/timer

/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root  80 Sep 25 17:28 .
drwxr-xr-x 3 root root 260 Sep 25 17:28 ..
lrwxrwxrwx 1 root root  12 Sep 25 17:28 pci-0000:00:1f.3 -> ../controlC0
lrwxrwxrwx 1 root root  12 Sep 25 17:28 pci-0000:01:00.1 -> ../controlC1


!!ALSA configuration files
!!------------------------

!!System wide config file (/etc/asound.conf)

# Use PulseAudio by default
pcm.!default {
  type pulse
  fallback "sysdefault"
  hint {
    show on
    description "Default ALSA Output (currently PulseAudio Sound Server)"
  }
}

ctl.!default {
  type pulse
  fallback "sysdefault"
}

# vim:set ft=alsaconf:


!!Aplay/Arecord output
!!--------------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC294 Analog [ALC294 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

ARECORD

**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC294 Analog [ALC294 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

!!Amixer output
!!-------------

!!-------Mixer controls for card 0 [PCH]

Card hw:0 'PCH'/'HDA Intel PCH at 0xa4518000 irq 156'
  Mixer name	: 'Realtek ALC294'
  Components	: 'HDA:10ec0294,10431881,00100004'
  Controls      : 10
  Simple ctrls  : 4
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 60 [69%] [-20.25dB] [on]
  Front Right: Playback 60 [69%] [-20.25dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 63
  Front Left: Capture 39 [62%] [12.00dB] [on]
  Front Right: Capture 39 [62%] [12.00dB] [on]

!!-------Mixer controls for card 1 [NVidia]

Card hw:1 'NVidia'/'HDA NVidia at 0xa4080000 irq 17'
  Mixer name	: 'Nvidia GPU 93 HDMI/DP'
  Components	: 'HDA:10de0093,10431891,00100100'
  Controls      : 14
  Simple ctrls  : 2
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'IEC958',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]


!!Alsactl output
!!--------------

--startcollapse--
state.PCH {
	control.1 {
		iface MIXER
		name 'Master Playback Volume'
		value.0 60
		value.1 60
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 87'
			dbmin -6525
			dbmax 0
			dbvalue.0 -2025
			dbvalue.1 -2025
		}
	}
	control.2 {
		iface MIXER
		name 'Master Playback Switch'
		value.0 true
		value.1 true
		comment {
			access 'read write'
			type BOOLEAN
			count 2
		}
	}
	control.3 {
		iface MIXER
		name 'Capture Volume'
		value.0 39
		value.1 39
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 63'
			dbmin -1725
			dbmax 3000
			dbvalue.0 1200
			dbvalue.1 1200
		}
	}
	control.4 {
		iface MIXER
		name 'Capture Switch'
		value.0 true
		value.1 true
		comment {
			access 'read write'
			type BOOLEAN
			count 2
		}
	}
	control.5 {
		iface MIXER
		name 'Mic Boost Volume'
		value.0 0
		value.1 0
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 3'
			dbmin 0
			dbmax 3000
			dbvalue.0 0
			dbvalue.1 0
		}
	}
	control.6 {
		iface CARD
		name 'Mic Phantom Jack'
		value true
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.7 {
		iface CARD
		name 'Speaker Phantom Jack'
		value true
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.8 {
		iface PCM
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		comment {
			access read
			type INTEGER
			count 2
			range '0 - 36'
		}
	}
	control.9 {
		iface PCM
		name 'Capture Channel Map'
		value.0 0
		value.1 0
		comment {
			access read
			type INTEGER
			count 2
			range '0 - 36'
		}
	}
	control.10 {
		iface MIXER
		name 'PCM Playback Volume'
		value.0 255
		value.1 255
		comment {
			access 'read write user'
			type INTEGER
			count 2
			range '0 - 255'
			tlv '0000000100000008ffffec1400000014'
			dbmin -5100
			dbmax 0
			dbvalue.0 0
			dbvalue.1 0
		}
	}
}
state.NVidia {
	control.1 {
		iface CARD
		name 'HDMI/DP,pcm=3 Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.2 {
		iface MIXER
		name 'IEC958 Playback Con Mask'
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.3 {
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.4 {
		iface MIXER
		name 'IEC958 Playback Default'
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access 'read write'
			type IEC958
			count 1
		}
	}
	control.5 {
		iface MIXER
		name 'IEC958 Playback Switch'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.6 {
		iface PCM
		device 3
		name ELD
		value ''
		comment {
			access 'read volatile'
			type BYTES
			count 0
		}
	}
	control.7 {
		iface CARD
		name 'HDMI/DP,pcm=7 Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.8 {
		iface MIXER
		name 'IEC958 Playback Con Mask'
		index 1
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.9 {
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		index 1
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.10 {
		iface MIXER
		name 'IEC958 Playback Default'
		index 1
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access 'read write'
			type IEC958
			count 1
		}
	}
	control.11 {
		iface MIXER
		name 'IEC958 Playback Switch'
		index 1
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.12 {
		iface PCM
		device 7
		name ELD
		value ''
		comment {
			access 'read volatile'
			type BYTES
			count 0
		}
	}
	control.13 {
		iface PCM
		device 3
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		value.2 0
		value.3 0
		value.4 0
		value.5 0
		value.6 0
		value.7 0
		comment {
			access 'read write'
			type INTEGER
			count 8
			range '0 - 36'
		}
	}
	control.14 {
		iface PCM
		device 7
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		value.2 0
		value.3 0
		value.4 0
		value.5 0
		value.6 0
		value.7 0
		comment {
			access 'read write'
			type INTEGER
			count 8
			range '0 - 36'
		}
	}
}
--endcollapse--


!!All Loaded Modules
!!------------------

Module
8021q
garp
mrp
ccm
ipt_MASQUERADE
nf_conntrack_netlink
nfnetlink
xfrm_user
xfrm_algo
iptable_nat
nf_nat_ipv4
xt_addrtype
iptable_filter
xt_conntrack
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
mousedev
libcrc32c
br_netfilter
snd_hda_codec_hdmi
bridge
intel_rapl
iTCO_wdt
stp
hid_multitouch
iTCO_vendor_support
arc4
llc
nvidia_modeset
overlay
x86_pkg_temp_thermal
intel_powerclamp
nvidia
iwlmvm
coretemp
kvm_intel
mac80211
nls_iso8859_1
kvm
nls_cp437
vfat
fat
drm_kms_helper
irqbypass
btusb
snd_hda_codec_realtek
btrtl
intel_cstate
pcc_cpufreq
btbcm
snd_hda_codec_generic
iwlwifi
intel_uncore
snd_hda_intel
btintel
drm
snd_hda_codec
bluetooth
intel_rapl_perf
cfg80211
snd_hda_core
r8169
asus_nb_wmi
pcspkr
asus_wmi
snd_hwdep
sparse_keymap
wmi_bmof
agpgart
snd_pcm
realtek
ipmi_devintf
libphy
i2c_i801
snd_timer
idma64
ucsi_acpi
mei_me
joydev
ipmi_msghandler
snd
typec_ucsi
ecdh_generic
input_leds
syscopyarea
mei
typec
sysfillrect
soundcore
sysimgblt
fb_sys_fops
processor_thermal_device
intel_lpss_pci
rfkill
intel_lpss
intel_soc_dts_iosf
intel_pch_thermal
i2c_hid
battery
ac
int3403_thermal
tpm_crb
int340x_thermal_zone
tpm_tis
evdev
tpm_tis_core
tpm
mac_hid
rng_core
int3400_thermal
acpi_thermal_rel
asus_wireless
acpi_tad
ip_tables
x_tables
hid_generic
usbhid
hid
dm_crypt
dm_mod
serio_raw
crct10dif_pclmul
atkbd
crc32_pclmul
ghash_clmulni_intel
libps2
pcbc
mxm_wmi
aesni_intel
aes_x86_64
xhci_pci
crypto_simd
cryptd
glue_helper
xhci_hcd
i8042
serio
wmi
ext4
crc32c_generic
crc32c_intel
crc16
mbcache
jbd2
fscrypto


!!Sysfs Files
!!-----------

/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0x90a60120
0x13 0x40000000
0x14 0x411111f0
0x15 0x411111f0
0x16 0x411111f0
0x17 0x90170110
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x40600001
0x1e 0x411111f0
0x1f 0x411111f0
0x21 0x411111f0

/sys/class/sound/hwC0D0/driver_pin_configs:

/sys/class/sound/hwC0D0/user_pin_configs:

/sys/class/sound/hwC0D0/init_verbs:

/sys/class/sound/hwC0D0/hints:

/sys/class/sound/hwC1D0/init_pin_configs:
0x04 0x585600f0
0x05 0x585600f0
0x06 0x185600f0
0x07 0x185600f0

/sys/class/sound/hwC1D0/driver_pin_configs:

/sys/class/sound/hwC1D0/user_pin_configs:

/sys/class/sound/hwC1D0/init_verbs:

/sys/class/sound/hwC1D0/hints:


!!ALSA/HDA dmesg
!!--------------

[    0.579977] ACPI: Added _OSI(Linux-Dell-Video)
[    0.579977] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.579977] ACPI: EC: EC started
--
[   11.476197] hid-generic 0018:04F3:30E9.0006: input,hidraw5: I2C HID v1.00 Mouse [ELAN1205:00 04F3:30E9] on i2c-ELAN1205:00
[   11.524146] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[   11.524182] snd_hda_intel 0000:01:00.1: Disabling MSI
[   11.524185] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   11.609087] audit: type=1130 audit(1569425323.799:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
--
[   11.612400] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[   11.616363] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC294: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   11.616365] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.616366] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.616367] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.616367] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.616368] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[   11.617900] usbcore: registered new interface driver btusb
--
[   13.049267] Bluetooth: hci0: Applying Intel DDC parameters completed
[   13.358561] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[   13.358663] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[   17.180735] kauditd_printk_skb: 129 callbacks suppressed

`hdajackretask` show me only internal Mic or internal Speaker. No headphone, so I override internal speaker by headphone, next dock headphone. No sound, it was in mute. I un-mute with alsamixer and still same behavior. Sound come out from speakers only.

Last edited by Shenron (2019-09-25 15:52:34)

Offline

#6 2020-09-06 00:43:11

flukejones
Member
Registered: 2020-09-06
Posts: 2

Re: [SOLVED] Zephyrus S GX502 - headphone not detected

Shenron wrote:

...

I've been working on a patch here if you would like to try it.

Offline

#7 2020-10-14 19:49:51

Shenron
Member
Registered: 2015-05-20
Posts: 11

Re: [SOLVED] Zephyrus S GX502 - headphone not detected

I'm on 5.4.70-1-lts kernel and it works out of the box smile

Offline

#8 2020-10-14 20:28:44

flukejones
Member
Registered: 2020-09-06
Posts: 2

Re: [SOLVED] Zephyrus S GX502 - headphone not detected

Great to hear!

For all others, the patch is in mainline now - https://git.kernel.org/pub/scm/linux/ke … 55e3fb680d

If you come here looking for GU502 help, please see - https://bugzilla.kernel.org/show_bug.cgi?id=208005#c41

Offline

Pages: 1

Board footer

Powered by FluxBB