You are not logged in.
Hi
This has been a long standing issue on my system. I have been unable to resolve this even after a few updates.
My kernel
uname -a
Linux boolean-pc 4.19.45-1-lts #1 SMP Wed May 22 13:02:41 CEST 2019 x86_64 GNU/Linux
Have tried reinstalling entire bluez 5.50-6.
journalctl o/p on restarting bluetooth service
May 30 02:02:51 boolean-pc bluetoothd[16101]: Bluetooth management interface 1.14 initialized
May 30 02:02:51 boolean-pc systemd[1]: Starting Hostname Service...
May 30 02:02:51 boolean-pc pulseaudio[32460]: E: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
May 30 02:02:52 boolean-pc bluetoothd[16101]: Endpoint registered: sender=:1.77 path=/MediaEndpoint/A2DPSource
May 30 02:02:52 boolean-pc bluetoothd[16101]: Endpoint registered: sender=:1.77 path=/MediaEndpoint/A2DPSink
May 30 02:02:52 boolean-pc dbus-daemon[9594]: [system] Successfully activated service 'org.freedesktop.hostname1'
May 30 02:02:52 boolean-pc systemd[1]: Started Hostname Service.
May 30 02:02:52 boolean-pc audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 30 02:02:52 boolean-pc kernel: audit: type=1130 audit(1559161972.571:116): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 30 02:02:54 boolean-pc sudo[16107]: theta : TTY=pts/1 ; PWD=/home/theta ; USER=root ; COMMAND=/usr/bin/journalctl -n 20
May 30 02:02:54 boolean-pc sudo[16107]: pam_unix(sudo:session): session opened for user root by (...skipping...
='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 30 02:02:52 boolean-pc kernel: audit: type=1130 audit(1559161972.571:116): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 30 02:02:54 boolean-pc sudo[16107]: theta : TTY=pts/1 ; PWD=/home/theta ; USER=root ; COMMAND=/usr/bin/journalctl -n 20
May 30 02:02:54 boolean-pc sudo[16107]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 30 02:03:22 boolean-pc systemd[1]: systemd-hostnamed.service: Succeeded.
May 30 02:03:22 boolean-pc audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 30 02:03:22 boolean-pc kernel: audit: type=1131 audit(1559162002.682:117): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 30 02:05:17 boolean-pc sudo[16162]: theta : TTY=pts/3 ; PWD=/home/theta ; USER=root ; COMMAND=/usr/bin/journalctl -n 20
May 30 02:05:17 boolean-pc sudo[16162]: pam_unix(sudo:session): session opened for user root by (uid=0)
May 30 02:05:55 boolean-pc sudo[16162]: pam_unix(sudo:session): session closed for user root
May 30 02:06:00 boolean-pc sudo[16170]: theta : TTY=pts/3 ; PWD=/home/theta ; USER=root ; COMMAND=/usr/bin/journalctl -n 20
May 30 02:06:00 boolean-pc sudo[16170]: pam_unix(sudo:session): session opened for user root by (uid=0)
(END)
There is an error w.r.t. [pulseaudio] backend-ofono.c which also I have been unable to resolve. Connecting to bluetooth headsets is extremely difficult.
Looking forward to some solution.
Offline
That's just a error in whatever GUI program you are using here (which one is it supposed to be?) Your journal excerpt shows you have a successful headset connection and you will probably have a sink within pulseaudio/pavucontrol. What's your output for
loginctl session-status
pacmd list-cards
pacmd list-sinks
Offline
login session-status:
1 - user (1002)
Since: Fri 2019-05-31 17:06:37 IST; 7h ago
Leader: 11094 (login)
Seat: seat0; vc1
TTY: tty1
Service: login; type tty; class user
State: active
Unit: session-1.scope
|- 471 /usr/share/skypeforlinux/skypeforlinux --type=renderer --no-sandbox --primordial-pipe-token=35186D602E30188A6E1AF0935BF1C8D9 --lang=en-US --app-path=/usr/share/skypeforlinux/resources/app.asar --node-integration=false --webview-tag=true --no-sandbox --preload=/usr/share/skypeforlinux/resources/app.asar/Preload.js --enable-pinch --num-raster-threads=2 --enable-main-frame-before-activation --content-image-texture-target=0,0,3553;0,1,3553;0,2,3553;0,3,3553;0,4,3553;0,5,3553;0,6,3553;0,7,3553;0,8,3553;0,9,3553;0,10,3553;0,11,3553;0,12,3553;0,13,3553;0,14,3553;0,15,3553;0,16,3553;1,0,3553;1,1,3553;1,2,3553;1,3,3553;1,4,3553;1,5,3553;1,6,3553;1,7,3553;1,8,3553;1,9,3553;1,10,3553;1,11,3553;1,12,3553;1,13,3553;1,14,3553;1,15,3553;1,16,3553;2,0,3553;2,1,3553;2,2,3553;2,3,3553;2,4,3553;2,5,3553;2,6,3553;2,7,3553;2,8,3553;2,9,3553;2,10,3553;2,11,3553;2,12,3553;2,13,3553;2,14,3553;2,15,3553;2,16,3553;3,0,3553;3,1,3553;3,2,3553;3,3,3553;3,4,3553;3,5,3553;3,6,3553;3,7,3553;3,8,
|- 511 /usr/lib/firefox/firefox -contentproc -childID 1 -isForBrowser -prefsLen 1 -prefMapSize 191595 -parentBuildID 20190521202118 -greomni /usr/lib/firefox/omni.ja -appomni /usr/lib/firefox/browser/omni.ja -appdir /usr/lib/firefox/browser 32570 true tab
|- 654 /usr/lib/firefox/firefox -contentproc -childID 3 -isForBrowser -prefsLen 5808 -prefMapSize 191595 -parentBuildID 20190521202118 -greomni /usr/lib/firefox/omni.ja -appomni /usr/lib/firefox/browser/omni.ja -appdir /usr/lib/firefox/browser 32570 true tab
|- 4966 urxvt -name bashrun -title bashrun -geometry 60x1 +sb -background #000000 -foreground #FFFFFF -keysym.Control-Up \033[1;5A -keysym.Control-Down \033[1;5B -keysym.Control-Left \033[1;5D -keysym.Control-Right \033[1;5C -e sh -c /bin/bash --rcfile /usr/share/bashrun/bashrc -i
|- 4968 /bin/bash --rcfile /usr/share/bashrun/bashrc -i
|- 5188 /usr/lib/firefox/firefox -contentproc -childID 19 -isForBrowser -prefsLen 8869 -prefMapSize 191595 -parentBuildID 20190521202118 -greomni /usr/lib/firefox/omni.ja -appomni /usr/lib/firefox/browser/omni.ja -appdir /usr/lib/firefox/browser 32570 true tab
|-11094 login -- theta
|-17960 /bin/sh /usr/bin/startx
|-19180 xinit /home/theta/.xinitrc -- /home/theta/.xserverrc :0 vt1 -keeptty -auth /tmp/serverauth.8pmIOYDdD5
|-19189 /usr/lib/Xorg -nolisten tcp :0 vt1 -keeptty -auth /tmp/serverauth.8pmIOYDdD5 -keeptty
|-21552 /usr/lib/firefox/firefox -contentproc -childID 43 -isForBrowser -prefsLen 9002 -prefMapSize 191595 -parentBuildID 20190521202118 -greomni /usr/lib/firefox/omni.ja -appomni /usr/lib/firefox/browser/omni.ja -appdir /usr/lib/firefox/browser 32570 true tab
|-22466 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-22572 /usr/share/ROX-Filer/ROX-Filer /home/theta/Current
|-22582 urxvt
|-22583 bash
|-25720 sh /home/theta/.config/openbox/autostart.sh
|-25721 sh /home/theta/.config/openbox/autostart.sh
|-25959 mono /usr/lib/tomboy/Tomboy.exe
|-26055 /bin/bash /home/theta/.scripts/toggle_wallpaper
|-26159 conky
|-26258 xscreensaver
|-26364 redshift-qt
|-26468 pidgin
|-26658 /bin/bash /usr/bin/devmon
|-27821 tint2
|-27822 xcompmgr -c -f
|-29090 urxvt
|-29091 bash
|-29106 sleep 1m
|-29107 loginctl session-status
|-29457 /usr/bin/udevil --monitor
|-32466 /usr/bin/redshift -v
|-32492 pasystray
|-32493 python /usr/bin/blueman-applet
|-32494 /usr/lib/geoclue-2.0/demos/agent
|-32501 /usr/share/skypeforlinux/skypeforlinux --executed-from=/home/theta --pid=32491
|-32506 /usr/share/skypeforlinux/skypeforlinux --type=zygote --no-sandbox
|-32530 /usr/share/skypeforlinux/skypeforlinux --type=gpu-process --no-sandbox --supports-dual-gpus=false --gpu-driver-bug-workarounds=7,24,76 --disable-gl-extensions=GL_KHR_blend_equation_advanced GL_KHR_blend_equation_advanced_coherent --disable-webrtc-hw-encoding --gpu-vendor-id=0x10de --gpu-device-id=0x139a --gpu-driver-vendor --gpu-driver-version --gpu-driver-date --gpu-secondary-vendor-ids=0x8086 --gpu-secondary-device-ids=0x1616 --service-request-channel-token=16599205B100CB212A9574A60E255797
`-32570 /usr/lib/firefox/firefox
pacmd list-cards
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_03.0>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xc4318000 irq 50"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "160c"
device.product.name = "Broadwell-U Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
off: Off (priority 0, available: unknown)
active profile: <off>
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 8
properties:
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xc431c000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9ca0"
device.product.name = "Wildcat Point-LP High Definition Audio Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"
pacmd list-sinks
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 79336 / 121% / 4.98 dB, front-right: 79336 / 121% / 4.98 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC3241 Analog"
alsa.id = "ALC3241 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xc431c000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9ca0"
device.product.name = "Wildcat Point-LP High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC3241"
alsa.components = "HDA:10ec0290,103c80dc,00100003"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-headphones>
Offline
That's just a error in whatever GUI program you are using here (which one is it supposed to be?) Your journal excerpt shows you have a successful headset connection and you will probably have a sink within pulseaudio/pavucontrol. What's your output for
loginctl session-status pacmd list-cards pacmd list-sinks
Have got the output but cannot make head or tail of it?
Offline
Sorry this one fell off the radar a bit
Looks generally alright, can you post your .xinitrc? Also general sanity check, pulseaudio-bluetooth is installed? If it is, what output do you get from
systemctl --user mask pulseaudio.socket
systemctl --user stop pulseaudio
pulseaudio -vvv #Keep that running in a terminal, post that output, what happens here if you connect your headset
systemctl --user unmask pulseaudio.socket #To restore pulseaudio autostart
Offline
1) systemctl --user mask pulseaudio.socket
Executes sucessfully with no output on terminal
2) systemctl --user stop pulseaudio
Executes sucessfully with no output on terminal
3) pulseaudio -vvv
I: [pulseaudio] sink-input.c: application.process.host = "boolean-pc"
I: [pulseaudio] sink-input.c: application.process.binary = "firefox"
I: [pulseaudio] sink-input.c: application.language = "C"
I: [pulseaudio] sink-input.c: window.x11.display = ":0"
I: [pulseaudio] sink-input.c: application.process.machine_id = "5265d46ac6594a469d8e518f56f8743e"
I: [pulseaudio] sink-input.c: application.process.session_id = "1"
I: [pulseaudio] sink-input.c: application.icon_name = "firefox"
I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioIPC Server"
I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
D: [pulseaudio] protocol-native.c: Requested latency=25.00 ms, Received latency=25.00 ms
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 100.00 ms = 25.00 ms + 2*25.00 ms + 25.00 ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1b.0.
D: [pulseaudio] protocol-native.c: Client firefox changes volume of sink input AudioStream.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to uncorking
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 784 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 196
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 196
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 784 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1761
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 784 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> RUNNING
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1490
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] ratelimit.c: 1531 events suppressed
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Implicit underrun of 'AudioStream'
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 48 bytes ago (1152 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 48 bytes ago (1152 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 48 bytes ago (1152 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 368 bytes ago (832 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 688 bytes ago (512 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (192 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to corking
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 0 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Mhmm, actually there is nothing to rewind.
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: RUNNING -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
I: [pulseaudio] sink-input.c: Freeing input 11 "AudioStream"
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1225
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Device suspended...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: (none) -> IDLE
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> SUSPENDED
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: (none) -> IDLE
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: IDLE -> SUSPENDED
I: [pulseaudio] core.c: All sinks and sources are suspended, vacuuming memory
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1b.0.
D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because it lacks role.
D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
I: [pulseaudio] sink-input.c: Trying to change sample rate
I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioIPC Server.
I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioIPC Server.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Trying resume...
I: [alsa-sink-ALC3241 Analog] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [alsa-sink-ALC3241 Analog] alsa-util.c: Maximum hw buffer size is 21845 ms
D: [alsa-sink-ALC3241 Analog] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-sink-ALC3241 Analog] alsa-util.c: ALSA period wakeups disabled
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Time scheduling watermark is 3.12ms
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Resumed successfully...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: IDLE -> (none)
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Starting playback.
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: SUSPENDED -> IDLE
D: [alsa-sink-ALC3241 Analog] ratelimit.c: 998 events suppressed
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: IDLE -> (none)
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: SUSPENDED -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
D: [pulseaudio] resampler.c: Resampler:
D: [pulseaudio] resampler.c: rate 48000 -> 48000 (method copy)
D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] sink-input.c: Created input 12 "AudioStream" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec float32le 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c: media.name = "AudioStream"
I: [pulseaudio] sink-input.c: application.name = "AudioIPC Server"
I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c: native-protocol.version = "32"
I: [pulseaudio] sink-input.c: application.process.id = "23382"
I: [pulseaudio] sink-input.c: application.process.user = "theta"
I: [pulseaudio] sink-input.c: application.process.host = "boolean-pc"
I: [pulseaudio] sink-input.c: application.process.binary = "firefox"
I: [pulseaudio] sink-input.c: application.language = "C"
I: [pulseaudio] sink-input.c: window.x11.display = ":0"
I: [pulseaudio] sink-input.c: application.process.machine_id = "5265d46ac6594a469d8e518f56f8743e"
I: [pulseaudio] sink-input.c: application.process.session_id = "1"
I: [pulseaudio] sink-input.c: application.icon_name = "firefox"
I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioIPC Server"
I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Requested latency=25.00 ms, Received latency=25.00 ms
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 100.00 ms = 25.00 ms + 2*25.00 ms + 25.00 ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Client firefox changes volume of sink input AudioStream.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to uncorking
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1490
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> RUNNING
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 2015
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Implicit underrun of 'AudioStream'
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 48 bytes ago (992 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 48 bytes ago (992 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 48 bytes ago (992 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 368 bytes ago (832 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 688 bytes ago (512 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (192 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to corking
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 0 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Mhmm, actually there is nothing to rewind.
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: RUNNING -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
I: [pulseaudio] sink-input.c: Freeing input 12 "AudioStream"
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1731
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Device suspended...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: (none) -> IDLE
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> SUSPENDED
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: (none) -> IDLE
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: IDLE -> SUSPENDED
I: [pulseaudio] core.c: All sinks and sources are suspended, vacuuming memory
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1b.0.
D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because it lacks role.
D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
I: [pulseaudio] sink-input.c: Trying to change sample rate
I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioIPC Server.
I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioIPC Server.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Trying resume...
I: [alsa-sink-ALC3241 Analog] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [alsa-sink-ALC3241 Analog] alsa-util.c: Maximum hw buffer size is 21845 ms
D: [alsa-sink-ALC3241 Analog] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-sink-ALC3241 Analog] alsa-util.c: ALSA period wakeups disabled
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Time scheduling watermark is 3.12ms
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Resumed successfully...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: IDLE -> (none)
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: SUSPENDED -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Starting playback.
D: [alsa-sink-ALC3241 Analog] ratelimit.c: 1235 events suppressed
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: IDLE -> (none)
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: SUSPENDED -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
D: [pulseaudio] resampler.c: Resampler:
D: [pulseaudio] resampler.c: rate 48000 -> 48000 (method copy)
D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] sink-input.c: Created input 13 "AudioStream" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec float32le 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c: media.name = "AudioStream"
I: [pulseaudio] sink-input.c: application.name = "AudioIPC Server"
I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c: native-protocol.version = "32"
I: [pulseaudio] sink-input.c: application.process.id = "23382"
I: [pulseaudio] sink-input.c: application.process.user = "theta"
I: [pulseaudio] sink-input.c: application.process.host = "boolean-pc"
I: [pulseaudio] sink-input.c: application.process.binary = "firefox"
I: [pulseaudio] sink-input.c: application.language = "C"
I: [pulseaudio] sink-input.c: window.x11.display = ":0"
I: [pulseaudio] sink-input.c: application.process.machine_id = "5265d46ac6594a469d8e518f56f8743e"
I: [pulseaudio] sink-input.c: application.process.session_id = "1"
I: [pulseaudio] sink-input.c: application.icon_name = "firefox"
I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioIPC Server"
I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Requested latency=25.00 ms, Received latency=25.00 ms
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 100.00 ms = 25.00 ms + 2*25.00 ms + 25.00 ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Client firefox changes volume of sink input AudioStream.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to uncorking
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1902
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> RUNNING
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1914
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Implicit underrun of 'AudioStream'
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 208 bytes ago (992 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 208 bytes ago (992 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 208 bytes ago (832 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 528 bytes ago (672 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 848 bytes ago (352 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 848 bytes ago (192 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1168 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1168 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to corking
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 0 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Mhmm, actually there is nothing to rewind.
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: RUNNING -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
I: [pulseaudio] sink-input.c: Freeing input 13 "AudioStream"
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 784 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 196
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 196
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 784 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 2490
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 784 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Device suspended...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: (none) -> IDLE
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> SUSPENDED
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: (none) -> IDLE
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: IDLE -> SUSPENDED
I: [pulseaudio] core.c: All sinks and sources are suspended, vacuuming memory
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1b.0.
D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because it lacks role.
D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
I: [pulseaudio] sink-input.c: Trying to change sample rate
I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioIPC Server.
I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioIPC Server.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Trying resume...
I: [alsa-sink-ALC3241 Analog] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [alsa-sink-ALC3241 Analog] alsa-util.c: Maximum hw buffer size is 21845 ms
D: [alsa-sink-ALC3241 Analog] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-sink-ALC3241 Analog] alsa-util.c: ALSA period wakeups disabled
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Time scheduling watermark is 3.12ms
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Resumed successfully...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: IDLE -> (none)
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: SUSPENDED -> IDLE
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Starting playback.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink-ALC3241 Analog] ratelimit.c: 1230 events suppressed
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: IDLE -> (none)
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: SUSPENDED -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
D: [pulseaudio] resampler.c: Resampler:
D: [pulseaudio] resampler.c: rate 48000 -> 48000 (method copy)
D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] sink-input.c: Created input 14 "AudioStream" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec float32le 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c: media.name = "AudioStream"
I: [pulseaudio] sink-input.c: application.name = "AudioIPC Server"
I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c: native-protocol.version = "32"
I: [pulseaudio] sink-input.c: application.process.id = "23382"
I: [pulseaudio] sink-input.c: application.process.user = "theta"
I: [pulseaudio] sink-input.c: application.process.host = "boolean-pc"
I: [pulseaudio] sink-input.c: application.process.binary = "firefox"
I: [pulseaudio] sink-input.c: application.language = "C"
I: [pulseaudio] sink-input.c: window.x11.display = ":0"
I: [pulseaudio] sink-input.c: application.process.machine_id = "5265d46ac6594a469d8e518f56f8743e"
I: [pulseaudio] sink-input.c: application.process.session_id = "1"
I: [pulseaudio] sink-input.c: application.icon_name = "firefox"
I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioIPC Server"
I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Requested latency=25.00 ms, Received latency=25.00 ms
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 100.00 ms = 25.00 ms + 2*25.00 ms + 25.00 ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Client firefox changes volume of sink input AudioStream.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to uncorking
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1512
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> RUNNING
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 624 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 156
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 156
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 624 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 2094
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 624 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 624 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Implicit underrun of 'AudioStream'
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 48 bytes ago (1152 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 48 bytes ago (1152 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 48 bytes ago (992 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 368 bytes ago (832 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 688 bytes ago (512 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (192 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to corking
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 0 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Mhmm, actually there is nothing to rewind.
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: RUNNING -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 624 bytes.
I: [pulseaudio] sink-input.c: Freeing input 14 "AudioStream"
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 156
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 156
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 624 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1242
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 624 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Device suspended...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: (none) -> IDLE
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> SUSPENDED
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: (none) -> IDLE
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: IDLE -> SUSPENDED
I: [pulseaudio] core.c: All sinks and sources are suspended, vacuuming memory
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1b.0.
D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because it lacks role.
D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
I: [pulseaudio] sink-input.c: Trying to change sample rate
I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioIPC Server.
I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioIPC Server.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Trying resume...
I: [alsa-sink-ALC3241 Analog] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [alsa-sink-ALC3241 Analog] alsa-util.c: Maximum hw buffer size is 21845 ms
D: [alsa-sink-ALC3241 Analog] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-sink-ALC3241 Analog] alsa-util.c: ALSA period wakeups disabled
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Time scheduling watermark is 3.12ms
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Resumed successfully...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: IDLE -> (none)
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: SUSPENDED -> IDLE
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Starting playback.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink-ALC3241 Analog] ratelimit.c: 1239 events suppressed
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: IDLE -> (none)
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: SUSPENDED -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
D: [pulseaudio] resampler.c: Resampler:
D: [pulseaudio] resampler.c: rate 48000 -> 48000 (method copy)
D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] sink-input.c: Created input 15 "AudioStream" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec float32le 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c: media.name = "AudioStream"
I: [pulseaudio] sink-input.c: application.name = "AudioIPC Server"
I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c: native-protocol.version = "32"
I: [pulseaudio] sink-input.c: application.process.id = "23382"
I: [pulseaudio] sink-input.c: application.process.user = "theta"
I: [pulseaudio] sink-input.c: application.process.host = "boolean-pc"
I: [pulseaudio] sink-input.c: application.process.binary = "firefox"
I: [pulseaudio] sink-input.c: application.language = "C"
I: [pulseaudio] sink-input.c: window.x11.display = ":0"
I: [pulseaudio] sink-input.c: application.process.machine_id = "5265d46ac6594a469d8e518f56f8743e"
I: [pulseaudio] sink-input.c: application.process.session_id = "1"
I: [pulseaudio] sink-input.c: application.icon_name = "firefox"
I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioIPC Server"
I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Requested latency=25.00 ms, Received latency=25.00 ms
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 100.00 ms = 25.00 ms + 2*25.00 ms + 25.00 ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Client firefox changes volume of sink input AudioStream.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to uncorking
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1799
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> RUNNING
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 784 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 196
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 196
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 784 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1884
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 784 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 784 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Implicit underrun of 'AudioStream'
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 368 bytes ago (832 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 368 bytes ago (832 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 368 bytes ago (832 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 688 bytes ago (512 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (192 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (192 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1008 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to corking
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 0 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Mhmm, actually there is nothing to rewind.
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: RUNNING -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
I: [pulseaudio] sink-input.c: Freeing input 15 "AudioStream"
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1297
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Device suspended...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: (none) -> IDLE
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> SUSPENDED
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: (none) -> IDLE
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: IDLE -> SUSPENDED
I: [pulseaudio] core.c: All sinks and sources are suspended, vacuuming memory
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1b.0.
D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because it lacks role.
D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
I: [pulseaudio] sink-input.c: Trying to change sample rate
I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioIPC Server.
I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioIPC Server.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Trying resume...
I: [alsa-sink-ALC3241 Analog] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [alsa-sink-ALC3241 Analog] alsa-util.c: Maximum hw buffer size is 21845 ms
D: [alsa-sink-ALC3241 Analog] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-sink-ALC3241 Analog] alsa-util.c: ALSA period wakeups disabled
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Time scheduling watermark is 3.12ms
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Resumed successfully...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: IDLE -> (none)
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: SUSPENDED -> IDLE
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Starting playback.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink-ALC3241 Analog] ratelimit.c: 1202 events suppressed
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: IDLE -> (none)
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: SUSPENDED -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
D: [pulseaudio] resampler.c: Resampler:
D: [pulseaudio] resampler.c: rate 48000 -> 48000 (method copy)
D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] sink-input.c: Created input 16 "AudioStream" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec float32le 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c: media.name = "AudioStream"
I: [pulseaudio] sink-input.c: application.name = "AudioIPC Server"
I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c: native-protocol.version = "32"
I: [pulseaudio] sink-input.c: application.process.id = "23382"
I: [pulseaudio] sink-input.c: application.process.user = "theta"
I: [pulseaudio] sink-input.c: application.process.host = "boolean-pc"
I: [pulseaudio] sink-input.c: application.process.binary = "firefox"
I: [pulseaudio] sink-input.c: application.language = "C"
I: [pulseaudio] sink-input.c: window.x11.display = ":0"
I: [pulseaudio] sink-input.c: application.process.machine_id = "5265d46ac6594a469d8e518f56f8743e"
I: [pulseaudio] sink-input.c: application.process.session_id = "1"
I: [pulseaudio] sink-input.c: application.icon_name = "firefox"
I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioIPC Server"
I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Requested latency=25.00 ms, Received latency=25.00 ms
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28800, base=8, prebuf=19208, minreq=9600 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 100.00 ms = 25.00 ms + 2*25.00 ms + 25.00 ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Client firefox changes volume of sink input AudioStream.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to uncorking
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 944 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 236
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 944 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1683
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 944 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> RUNNING
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 784 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 196
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 196
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 784 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 1543
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 784 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 784 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] protocol-native.c: Implicit underrun of 'AudioStream'
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 208 bytes ago (992 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 208 bytes ago (992 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 208 bytes ago (992 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 528 bytes ago (672 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 848 bytes ago (352 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1168 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1168 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1168 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1168 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: Found underrun 1168 bytes ago (32 bytes ahead in playback buffer)
D: [alsa-sink-ALC3241 Analog] sink-input.c: Requesting rewind due to corking
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 0 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Mhmm, actually there is nothing to rewind.
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: RUNNING -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Latency set to 6.25ms
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: hwbuf_unused=351600
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: setting avail_min=88051
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
D: [alsa-sink-ALC3241 Analog] sink.c: Volume not changing
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Requested to rewind 1200 bytes.
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Limited to 784 bytes.
I: [pulseaudio] sink-input.c: Freeing input 16 "AudioStream"
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: before: 196
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: after: 196
D: [alsa-sink-ALC3241 Analog] alsa-sink.c: Rewound 784 bytes.
D: [alsa-sink-ALC3241 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC3241 Analog] sink.c: latency = 546
D: [alsa-sink-ALC3241 Analog] sink-input.c: Have to rewind 784 bytes on render memblockq.
D: [alsa-sink-ALC3241 Analog] source.c: Processing rewind...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-ALC3241 Analog] alsa-sink.c: Device suspended...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: suspend_cause: (none) -> IDLE
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1b.0.analog-stereo: state: IDLE -> SUSPENDED
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: suspend_cause: (none) -> IDLE
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: state: IDLE -> SUSPENDED
I: [pulseaudio] core.c: All sinks and sources are suspended, vacuuming memory
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1b.0.
4)
$ systemctl --user unmask pulseaudio.socket
Removed /home/user/.config/systemd/user/pulseaudio.socket.
Offline
That is truncated, and the pulse module either not loaded or not detected... Work through
https://wiki.archlinux.org/index.php/Bl … g_does_not
https://wiki.archlinux.org/index.php/Bl … play_sound
Come back with any error messages or uncertainties.
Offline
Okay a couple of common errors. Now I can't even seem to pair with headset or speakers both. The bluetooth modules are not loading at all.
$ sudo pactl load-module module-bluetooth-discover
Failure: Module initialization failed
$ sudo pactl load-module module-bluetooth-policy
Failure: Module initialization failed
$ sudo pactl load-module module-bluez5-device
Failure: Module initialization failed
$ sudo pactl load-module module-bluez5-discover
Failure: Module initialization failed
Offline
I found this in my startup log:
[ 2355.274176] Bluetooth: hci0: unexpected event for opcode 0xfc2f
Offline
hmm... There are some known bluetooth issues in the kernel according to https://cdn.kernel.org/pub/linux/kernel … Log-5.1.10 there should be a fix for those, the 5.1.11 kernel is currently in testing. core
Last edited by V1del (2019-06-18 13:17:29)
Offline
hmm... There are some known bluetooth issues in the kernel according to https://cdn.kernel.org/pub/linux/kernel … Log-5.1.10 there should be a fix for those, the 5.1.11 kernel is currently in testing.
Anything I can help the kernel guys with?
Offline
Make sure your system is updated, the relevant commit I'm thinking of is fixed in the latest versions. Then recheck dmesg/try to get a connection up again.
Offline
I use the LTS kernel, just updating to 4.19.55. Will recheck and post relevant O/P.
Offline
Post update of the kernel (LTS only). I have installed the normal one also but it requires a number of rebuilding of modules, will try that out subsequently.
Log file errors are listed below
journalctl -p 3 -xb
Jul 14 10:21:12 boolean-pc kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.>
Jul 14 10:21:12 boolean-pc kernel: ACPI Error: Method parse/execution failed \_TZ.FN00._ON, AE_N>
Jul 14 10:21:12 boolean-pc kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.>
Jul 14 10:21:12 boolean-pc kernel: ACPI Error: Method parse/execution failed \_TZ.FN00._ON, AE_N>
Jul 14 10:21:12 boolean-pc kernel: acpi PNP0C0B:00: Failed to set initial power state
Jul 14 10:21:12 boolean-pc kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.>
Jul 14 10:21:12 boolean-pc kernel: ACPI Error: Method parse/execution failed \_TZ.TZ00._TMP, AE_>
Jul 14 10:21:12 boolean-pc kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.>
Jul 14 10:21:12 boolean-pc kernel: ACPI Error: Method parse/execution failed \_TZ.TZ00._TMP, AE_>
Jul 14 10:21:12 boolean-pc kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.>
Jul 14 10:21:12 boolean-pc kernel: ACPI Error: Method parse/execution failed \_TZ.TZ01._TMP, AE_>
Jul 14 10:21:12 boolean-pc kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.>
Jul 14 10:21:12 boolean-pc kernel: ACPI Error: Method parse/execution failed \_TZ.TZ01._TMP, AE_>
Jul 14 10:21:15 boolean-pc kernel: kvm: disabled by bios
Jul 14 10:21:24 boolean-pc kernel: Bluetooth: hci0: unexpected event for opcode 0xfc2f
Jul 14 10:21:24 boolean-pc kernel: print_req_error: critical medium error, dev sr0, sector 16368
Jul 14 10:21:24 boolean-pc kernel: Buffer I/O error on dev sr0, logical block 2046, async page r>
Jul 14 10:21:24 boolean-pc kernel: print_req_error: critical medium error, dev sr0, sector 16360
Jul 14 10:21:24 boolean-pc kernel: Buffer I/O error on dev sr0, logical block 2045, async page r>
Jul 14 10:21:24 boolean-pc kernel: print_req_error: critical medium error, dev sr0, sector 16344
Jul 14 10:21:24 boolean-pc kernel: Buffer I/O error on dev sr0, logical block 2043, async page r>
Jul 14 10:21:24 boolean-pc kernel: print_req_error: critical medium error, dev sr0, sector 16336
Jul 14 10:21:24 boolean-pc kernel: Buffer I/O error on dev sr0, logical block 2042, async page r>
Jul 14 13:20:21 boolean-pc kernel: ACPI Error: Cannot assign type [Reference] to [RegionField]
It shows a bluetooth opcode 0xfc2f
The errors with ACPI have also been there for a long time. I haven't had the time to correct them. Any suggestions?
Offline
The main line kernel is now 5.2 on Arch; it has had significant firmware updates. You might try your luck with it.
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
$ uname -a
Linux boolean-pc 5.2.9-arch1-1-ARCH #1 SMP PREEMPT Fri Aug 16 11:29:43 UTC 2019 x86_64 GNU/Linux
$
Updated to the latest kernel. Still the same issue. I believe it has got to do something with bluetooth configuration and maybe kernel modules. I also get a failure in loading the service
The unit systemd-modules-load.service has entered the 'failed' state with result 'exit-code'.
Aug 18 03:08:33 boolean-pc systemd[1]: Failed to start Load Kernel Modules.
Also the message which pops up shows the following:
g-dbus-error-quark: GDBus.Error:org.freedesktop.DBus.Error.Failed: Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/main/DbusService.py", line 124, in _handle_method_call
ok(method(*args))
File "/usr/lib/python3.7/site-packages/blueman/plugins/mechanism/Network.py", line 49, in _reload_network
nc = NetConf.get_default()
File "/usr/lib/python3.7/site-packages/blueman/main/NetConf.py", line 270, in get_default
obj = pickle.load(f)
EOFError: Ran out of input
(0)
Doesn't this relate to dbus. Could some dbus config file be corrupt, etc?
The nearest online post I found to my problem is at
https://github.com/blueman-project/blueman/issues/913
which in turn directs to
https://github.com/blueman-project/blueman/issues/912
Officially documented at
https://github.com/blueman-project/blue … /PolicyKit
I created the above mentioned polkit rule
https://wiki.archlinux.org/index.php/Bl … ermissions
The above wiki entry mentioned "the user needs to be authorized to communicate with the Bluetooth daemon via D-Bus - the lp group is specified in /etc/dbus-1/system.d/bluetooth.conf"
I didnot have a bluetooth.conf file, so I created one with the follwing content:
<policy user="blePeripheral">
<allow own="org.bluez"/>
<allow send_destination="org.bluez"/>
<allow send_interface="org.bluez.GattCharacteristic1"/>
<allow send_interface="org.bluez.GattDescriptor1"/>
<allow send_interface="org.freedesktop.DBus.ObjectManager"/>
<allow send_interface="org.freedesktop.DBus.Properties"/>
</policy>
Now how does one specify the lp group here?
Last edited by theta (2019-08-17 22:44:01)
Offline
Bump anyone?
Offline
If you didn't enable bluetooth.service yet, try to start and enable it first.
Offline
@goldielin That was established (both mentioned and confirmed by logs) to be the case in the first post. FWIW since that semi necro already happened, make sure you're up to date, there was a new bluez release.
Offline
@V1del Thanks for pointing out the log in the first post that I'm missed, Sorry.
Offline
If you didn't enable bluetooth.service yet, try to start and enable it first.
Already enabled.
Just updated to kernel 5.3.5 and the error still persists. This has been more troublesome than bed bugs.
Also I shifted to the mailine kernel instead of lts just to be sure that I am getting all the relevant firmware updates.
Offline
This is the list of warning w.r.t. the GUI while starting blueman-manager.
It appears that the problem lies interfacing between blueman-manager and the python bindings which it uses.
I haven't been able to make head or tail of this. Have tried the blueman git version.
Also tried playing around with python-bluepy,python-pybluez,python2-bluepy,python2-pybluez -> NO SUCESS
blueman-manager version 2.1.1 starting
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 495, in _set_device_cell_data
surface = self.make_device_icon(row["icon_info"], row["paired"], row["trusted"])
File "/usr/lib/python3.7/site-packages/blueman/gui/manager/ManagerDeviceList.py", line 195, in make_device_icon
trusted_surface = icon_info.load_surface(window)
AttributeError: 'NoneType' object has no attribute 'load_surface'
Offline
That's just a error in whatever GUI program you are using here (which one is it supposed to be?) Your journal excerpt shows you have a successful headset connection and you will probably have a sink within pulseaudio/pavucontrol. What's your output for
loginctl session-status pacmd list-cards pacmd list-sinks
Posted the output from the GUI. Request if you could have a look?
Offline
Since quite a bit of time has passed between now and then, what's your current
journalctl -b
Offline
Oct 12 17:13:48 pc systemd[15817]: Started Bluetooth management applet.
Oct 12 17:13:48 pc blueman-applet[37820]: blueman-applet version 2.1.1 starting
Oct 12 17:13:48 pc blueman-applet[37820]: There is an instance already running
Oct 12 17:13:48 pc systemd[15817]: blueman-applet.service: Succeeded.
Oct 12 17:14:18 pc systemd[1]: blueman-mechanism.service: Succeeded.
Oct 12 17:14:18 pc audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg>
Oct 12 17:14:18 pc kernel: audit: type=1131 audit(1570880658.548:59): pid=1 uid=0 auid=4>
Oct 12 17:15:01 pc dbus-daemon[6135]: [system] Activating via systemd: service name='org>
Oct 12 17:15:01 pc dbus-daemon[6135]: dbus-daemon[6135]: [system] Activating via systemd>
Oct 12 17:15:01 pc systemd[1]: Starting Bluetooth management mechanism...
Oct 12 17:15:01 pc blueman-mechanism[37965]: Unable to init server: Could not connect: C>
Oct 12 17:15:01 pc blueman-mechanism[37965]: Unable to init server: Could not connect: C>
Oct 12 17:15:01 pc dbus-daemon[16658]: [session uid=1002 pid=16658] Activating via syste>
Oct 12 17:15:01 pc systemd[15817]: Starting Bluetooth management applet...
Oct 12 17:15:01 pc blueman-mechani[37965]: gtk_icon_theme_get_for_screen: assertion 'GDK>
Oct 12 17:15:01 pc dbus-daemon[6135]: [system] Successfully activated service 'org.bluem>
Oct 12 17:15:01 pc dbus-daemon[6135]: dbus-daemon[6135]: [system] Successfully activated>
Oct 12 17:15:01 pc systemd[1]: Started Bluetooth management mechanism.
Oct 12 17:15:01 pc audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 ms>
Oct 12 17:15:01 pc kernel: audit: type=1130 audit(1570880701.718:60): pid=1 uid=0 auid=4>
Oct 12 17:15:01 pc dbus-daemon[16658]: [session uid=1002 pid=16658] Successfully activat>
Oct 12 17:15:01 pc systemd[15817]: Started Bluetooth management applet.
Oct 12 17:15:02 pc blueman-applet[37971]: blueman-applet version 2.1.1 starting
Oct 12 17:15:02 pc blueman-applet[37971]: There is an instance already running
Oct 12 17:15:02 pc systemd[15817]: blueman-applet.service: Succeeded.
Offline