You are not logged in.

Pages: 1

#1 2019-10-15 14:33:12

MorningWood
Member
Registered: 2008-06-06
Posts: 78

[SOLVED] Ryzen 7 3700U/RX Vega 10 APU Video Issues

Hey all,
Just recently got an HP Envy x360 with the ryzen 7/Vega combo and it's not being very cooperative.
Running mesa 19.2.1-1 (having even tried mesa-git 19.3) with kernel 5.3.5.  Latest BIOS update.
I've installed all of the basics and followed the amdgpu wiki entry but upon system start I am greeted with the shell.
When trying to launch SDDM, I get the following:

[21:53:20.965] (II) DAEMON: Initializing...
[21:53:20.973] (II) DAEMON: Starting...
[21:53:20.973] (II) DAEMON: Logind interface found
[21:53:20.975] (II) DAEMON: Adding new display on vt 1 ...
[21:53:20.975] (II) DAEMON: Loading theme configuration from ""
[21:53:20.975] (II) DAEMON: Display server starting...
[21:53:20.976] (II) DAEMON: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{13d30c6f-d1b3-4aff-bf67-85ba9265286f} -background none -noreset -displayfd 16 -seat seat0 vt1
[21:53:20.984] (EE) DAEMON: Failed to read display number from pipe
[21:53:20.984] (EE) DAEMON: Display server failed to start. Exiting

Running the Xorg configuration spits out the following:

X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
Build Operating System: Linux Arch Linux
Current Operating System: Linux ARCHY 5.3.5-arch1-1-ARCH #1 SMP PREEMPT Mon Oct 7 19:03:08 UTC 2019 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7ed25510-1a18-47e9-9003-e436ec3205bd rw loglevel=3 quiet
Build Date: 30 June 2019  09:52:01AM
 
Current version of pixman: 0.38.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/mxw/.local/share/xorg/Xorg.0.log", Time: Sat Oct 12 22:08:42 2019
List of video drivers:
	amdgpu
	modesetting
xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
(++) Using config file: "/home/mxw/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) AMDGPU(0): [KMS] Kernel modesetting enabled.
(II) AMDGPU(1): [KMS] drm report modesetting isn't supported.


Xorg is not able to detect your mouse.
Edit the file and correct the Device.

Xorg has configured a multihead system, please check your config.

Your xorg.conf file is /home/mxw/xorg.conf.new

To test the server, run 'X -config /home/mxw/xorg.conf.new'

(EE) Server terminated with error (2). Closing log file.

Testing the server turns the screen black and outputs:

X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
Build Operating System: Linux Arch Linux
Current Operating System: Linux ARCHY 5.3.5-arch1-1-ARCH #1 SMP PREEMPT Mon Oct 7 19:03:08 UTC 2019 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7ed25510-1a18-47e9-9003-e436ec3205bd rw loglevel=3 quiet
Build Date: 30 June 2019  09:52:01AM
 
Current version of pixman: 0.38.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 12 22:10:02 2019
(++) Using config file: "/home/mxw/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) AMDGPU(0): [KMS] Kernel modesetting enabled.
(II) AIGLX: Suspending AIGLX clients for VT switch

and lastly, Xorg.0.log:

[   145.273] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   145.273] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[   145.273] Build Operating System: Linux Arch Linux
[   145.273] Current Operating System: Linux ARCHY 5.3.5-arch1-1-ARCH #1 SMP PREEMPT Mon Oct 7 19:03:08 UTC 2019 x86_64
[   145.273] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7ed25510-1a18-47e9-9003-e436ec3205bd rw loglevel=3 quiet
[   145.273] Build Date: 30 June 2019  09:52:01AM
[   145.273]  
[   145.273] Current version of pixman: 0.38.4
[   145.273] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   145.273] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   145.274] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 12 22:10:02 2019
[   145.274] (++) Using config file: "/home/mxw/xorg.conf.new"
[   145.274] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   145.274] (==) ServerLayout "X.org Configured"
[   145.274] (**) |-->Screen "Screen0" (0)
[   145.274] (**) |   |-->Monitor "Monitor0"
[   145.274] (**) |   |-->Device "Card0"
[   145.274] (**) |-->Screen "Screen1" (1)
[   145.274] (**) |   |-->Monitor "Monitor1"
[   145.274] (**) |   |-->Device "Card1"
[   145.274] (**) |-->Input Device "Mouse0"
[   145.274] (**) |-->Input Device "Keyboard0"
[   145.274] (==) Automatically adding devices
[   145.274] (==) Automatically enabling devices
[   145.274] (==) Automatically adding GPU devices
[   145.274] (==) Automatically binding GPU devices
[   145.274] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   145.274] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   145.274] 	Entry deleted from font path.
[   145.274] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   145.274] 	Entry deleted from font path.
[   145.274] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   145.274] 	Entry deleted from font path.
[   145.274] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   145.274] 	Entry deleted from font path.
[   145.274] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   145.274] 	Entry deleted from font path.
[   145.274] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   145.274] 	Entry deleted from font path.
[   145.274] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   145.274] 	Entry deleted from font path.
[   145.274] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   145.274] 	Entry deleted from font path.
[   145.274] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   145.274] 	Entry deleted from font path.
[   145.274] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   145.274] 	Entry deleted from font path.
[   145.275] (**) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/TTF
[   145.275] (**) ModulePath set to "/usr/lib/xorg/modules"
[   145.275] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   145.275] (WW) Disabling Mouse0
[   145.275] (WW) Disabling Keyboard0
[   145.275] (II) Module ABI versions:
[   145.275] 	X.Org ANSI C Emulation: 0.4
[   145.275] 	X.Org Video Driver: 24.0
[   145.275] 	X.Org XInput driver : 24.1
[   145.275] 	X.Org Server Extension : 10.0
[   145.275] (--) using VT number 2

[   145.275] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   145.276] (II) xfree86: Adding drm device (/dev/dri/card0)
[   145.289] (--) PCI:*(4@0:0:0) 1002:15d8:103c:85dd rev 193, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfe400000/524288, I/O @ 0x0000e000/256
[   145.289] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   145.289] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[   145.289] (II) LoadModule: "glx"
[   145.289] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   145.291] (II) Module glx: vendor="X.Org Foundation"
[   145.291] 	compiled for 1.20.5, module version = 1.0.0
[   145.291] 	ABI class: X.Org Server Extension, version 10.0
[   145.291] (II) LoadModule: "amdgpu"
[   145.291] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[   145.292] (II) Module amdgpu: vendor="X.Org Foundation"
[   145.292] 	compiled for 1.20.5, module version = 19.1.0
[   145.292] 	Module class: X.Org Video Driver
[   145.292] 	ABI class: X.Org Video Driver, version 24.0
[   145.292] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[   145.309] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[   145.315] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[   145.315] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   145.315] (==) AMDGPU(0): Default visual is TrueColor
[   145.315] (==) AMDGPU(0): RGB weight 888
[   145.315] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[   145.315] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x15d8)
[   145.315] (II) Loading sub module "fb"
[   145.315] (II) LoadModule: "fb"
[   145.315] (II) Loading /usr/lib/xorg/modules/libfb.so
[   145.316] (II) Module fb: vendor="X.Org Foundation"
[   145.316] 	compiled for 1.20.5, module version = 1.0.0
[   145.316] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   145.316] (II) Loading sub module "dri2"
[   145.316] (II) LoadModule: "dri2"
[   145.316] (II) Module "dri2" already built-in
[   145.569] (II) Loading sub module "glamoregl"
[   145.569] (II) LoadModule: "glamoregl"
[   145.569] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   145.577] (II) Module glamoregl: vendor="X.Org Foundation"
[   145.577] 	compiled for 1.20.5, module version = 1.0.1
[   145.577] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   145.622] (II) AMDGPU(0): glamor X acceleration enabled on AMD RAVEN (DRM 3.33.0, 5.3.5-arch1-1-ARCH, LLVM 9.0.0)
[   145.622] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[   145.622] (==) AMDGPU(0): TearFree property default: auto
[   145.622] (==) AMDGPU(0): VariableRefresh: disabled
[   145.622] (II) AMDGPU(0): KMS Pageflipping: enabled
[   145.622] (II) AMDGPU(0): Output eDP using monitor section Monitor0
[   145.622] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[   145.622] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[   145.635] (II) AMDGPU(0): EDID for output eDP
[   145.635] (II) AMDGPU(0): Manufacturer: BOE  Model: 7ff  Serial#: 0
[   145.635] (II) AMDGPU(0): Year: 2018  Week: 31
[   145.635] (II) AMDGPU(0): EDID Version: 1.4
[   145.635] (II) AMDGPU(0): Digital Display Input
[   145.635] (II) AMDGPU(0): 6 bits per channel
[   145.635] (II) AMDGPU(0): Digital interface is DisplayPort
[   145.635] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   145.635] (II) AMDGPU(0): Gamma: 2.20
[   145.635] (II) AMDGPU(0): No DPMS capabilities specified
[   145.635] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 
[   145.635] (II) AMDGPU(0): First detailed timing is preferred mode
[   145.635] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[   145.635] (II) AMDGPU(0): Display is continuous-frequency
[   145.635] (II) AMDGPU(0): redX: 0.590 redY: 0.350   greenX: 0.329 greenY: 0.555
[   145.635] (II) AMDGPU(0): blueX: 0.152 blueY: 0.118   whiteX: 0.312 whiteY: 0.328
[   145.635] (II) AMDGPU(0): Manufacturer's mask: 0
[   145.635] (II) AMDGPU(0): Supported detailed timing:
[   145.635] (II) AMDGPU(0): clock: 149.6 MHz   Image Size:  344 x 194 mm
[   145.635] (II) AMDGPU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2187 h_border: 0
[   145.635] (II) AMDGPU(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1140 v_border: 0
[   145.635] (II) AMDGPU(0): Supported detailed timing:
[   145.635] (II) AMDGPU(0): clock: 99.7 MHz   Image Size:  344 x 194 mm
[   145.635] (II) AMDGPU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2187 h_border: 0
[   145.635] (II) AMDGPU(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1140 v_border: 0
[   145.635] (II) AMDGPU(0): Unknown vendor-specific block 2
[   145.635] (II) AMDGPU(0): EDID (in hex):
[   145.635] (II) AMDGPU(0): 	00ffffffffffff0009e5ff0700000000
[   145.635] (II) AMDGPU(0): 	1f1c0104952213780324109759548e27
[   145.635] (II) AMDGPU(0): 	1e505400000001010101010101010101
[   145.635] (II) AMDGPU(0): 	0101010101016f3a800b71383c403020
[   145.635] (II) AMDGPU(0): 	360058c21000001af426800b71383c40
[   145.635] (II) AMDGPU(0): 	3020360058c21000001a000000000000
[   145.635] (II) AMDGPU(0): 	00000000000000000000000000000002
[   145.635] (II) AMDGPU(0): 	000d49ff0a3c6e1615256e000000000e
[   145.635] (II) AMDGPU(0): Printing probed modes for output eDP
[   145.635] (II) AMDGPU(0): Modeline "1920x1080"x60.0  149.59  1920 1968 2000 2187  1080 1083 1089 1140 +hsync -vsync (68.4 kHz eP)
[   145.635] (II) AMDGPU(0): Modeline "1920x1080"x40.0   99.72  1920 1968 2000 2187  1080 1083 1089 1140 +hsync -vsync (45.6 kHz e)
[   145.635] (II) AMDGPU(0): Modeline "1680x1050"x60.0  149.59  1680 1968 2000 2187  1050 1083 1089 1140 +hsync -vsync (68.4 kHz e)
[   145.635] (II) AMDGPU(0): Modeline "1280x1024"x60.0  149.59  1280 1968 2000 2187  1024 1083 1089 1140 +hsync -vsync (68.4 kHz e)
[   145.635] (II) AMDGPU(0): Modeline "1440x900"x60.0  149.59  1440 1968 2000 2187  900 1083 1089 1140 +hsync -vsync (68.4 kHz e)
[   145.635] (II) AMDGPU(0): Modeline "1280x800"x60.0  149.59  1280 1968 2000 2187  800 1083 1089 1140 +hsync -vsync (68.4 kHz e)
[   145.635] (II) AMDGPU(0): Modeline "1280x720"x60.0  149.59  1280 1968 2000 2187  720 1083 1089 1140 +hsync -vsync (68.4 kHz e)
[   145.635] (II) AMDGPU(0): Modeline "1024x768"x60.0  149.59  1024 1968 2000 2187  768 1083 1089 1140 +hsync -vsync (68.4 kHz e)
[   145.635] (II) AMDGPU(0): Modeline "800x600"x60.0  149.59  800 1968 2000 2187  600 1083 1089 1140 +hsync -vsync (68.4 kHz e)
[   145.635] (II) AMDGPU(0): Modeline "640x480"x60.0  149.59  640 1968 2000 2187  480 1083 1089 1140 +hsync -vsync (68.4 kHz e)
[   145.635] (II) AMDGPU(0): EDID for output HDMI-A-0
[   145.635] (II) AMDGPU(0): EDID for output DisplayPort-0
[   145.635] (II) AMDGPU(0): Output eDP connected
[   145.635] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[   145.635] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[   145.635] (II) AMDGPU(0): Using exact sizes for initial modes
[   145.635] (II) AMDGPU(0): Output eDP using initial mode 1920x1080 +0+0
[   145.635] (II) AMDGPU(0): mem size init: gart size :bf7cf000 vram size: s:7e852000 visible:7e852000
[   145.635] (==) AMDGPU(0): DPI set to (96, 96)
[   145.635] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[   145.635] (II) Loading sub module "ramdac"
[   145.635] (II) LoadModule: "ramdac"
[   145.635] (II) Module "ramdac" already built-in
[   145.636] (II) AMDGPU(0): [DRI2] Setup complete
[   145.636] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[   145.636] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[   145.702] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[   145.704] (II) AMDGPU(0): SYNC extension fences enabled
[   145.704] (II) AMDGPU(0): Present extension enabled
[   145.704] (==) AMDGPU(0): DRI3 enabled
[   145.704] (==) AMDGPU(0): Backing store enabled
[   145.704] (II) AMDGPU(0): Direct rendering enabled
[   145.716] (II) AMDGPU(0): Use GLAMOR acceleration.
[   145.716] (II) AMDGPU(0): Acceleration enabled
[   145.716] (==) AMDGPU(0): DPMS enabled
[   145.716] (==) AMDGPU(0): Silken mouse disabled
[   145.716] (II) AMDGPU(0): Set up textured video (glamor)
[   145.736] (II) Initializing extension Generic Event Extension
[   145.736] (II) Initializing extension SHAPE
[   145.736] (II) Initializing extension MIT-SHM
[   145.736] (II) Initializing extension XInputExtension
[   145.736] (II) Initializing extension XTEST
[   145.736] (II) Initializing extension BIG-REQUESTS
[   145.736] (II) Initializing extension SYNC
[   145.736] (II) Initializing extension XKEYBOARD
[   145.736] (II) Initializing extension XC-MISC
[   145.736] (II) Initializing extension SECURITY
[   145.736] (II) Initializing extension XFIXES
[   145.736] (II) Initializing extension RENDER
[   145.736] (II) Initializing extension RANDR
[   145.736] (II) Initializing extension COMPOSITE
[   145.736] (II) Initializing extension DAMAGE
[   145.736] (II) Initializing extension MIT-SCREEN-SAVER
[   145.736] (II) Initializing extension DOUBLE-BUFFER
[   145.736] (II) Initializing extension RECORD
[   145.736] (II) Initializing extension DPMS
[   145.736] (II) Initializing extension Present
[   145.736] (II) Initializing extension DRI3
[   145.736] (II) Initializing extension X-Resource
[   145.736] (II) Initializing extension XVideo
[   145.736] (II) Initializing extension XVideo-MotionCompensation
[   145.736] (II) Initializing extension GLX
[   145.762] (II) AIGLX: Loaded and initialized radeonsi
[   145.762] (II) GLX: Initialized DRI2 GL provider for screen 0
[   145.762] (II) Initializing extension XFree86-VidModeExtension
[   145.762] (II) Initializing extension XFree86-DGA
[   145.762] (II) Initializing extension XFree86-DRI
[   145.762] (II) Initializing extension DRI2
[   145.764] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[   145.859] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[   145.859] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   145.859] (II) LoadModule: "libinput"
[   145.859] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   145.863] (II) Module libinput: vendor="X.Org Foundation"
[   145.863] 	compiled for 1.20.5, module version = 0.29.0
[   145.863] 	Module class: X.Org XInput Driver
[   145.863] 	ABI class: X.Org XInput driver, version 24.1
[   145.863] (II) Using input driver 'libinput' for 'Video Bus'
[   145.863] (**) Video Bus: always reports core events
[   145.863] (**) Option "Device" "/dev/input/event2"
[   145.863] (**) Option "_source" "server/udev"
[   145.867] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[   145.867] (II) event2  - Video Bus: device is a keyboard
[   145.867] (II) event2  - Video Bus: device removed
[   145.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0e/LNXVIDEO:01/input/input2/event2"
[   145.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[   145.920] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[   145.920] (II) event2  - Video Bus: device is a keyboard
[   145.921] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   145.921] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   145.921] (II) Using input driver 'libinput' for 'Power Button'
[   145.922] (**) Power Button: always reports core events
[   145.922] (**) Option "Device" "/dev/input/event0"
[   145.922] (**) Option "_source" "server/udev"
[   145.923] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   145.923] (II) event0  - Power Button: device is a keyboard
[   145.923] (II) event0  - Power Button: device removed
[   145.968] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   145.968] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   145.970] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   145.970] (II) event0  - Power Button: device is a keyboard
[   145.971] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   145.971] (II) No input driver specified, ignoring this device.
[   145.971] (II) This device may have been added with another device file.
[   145.972] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13)
[   145.972] (II) No input driver specified, ignoring this device.
[   145.972] (II) This device may have been added with another device file.
[   145.973] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event7)
[   145.973] (II) No input driver specified, ignoring this device.
[   145.973] (II) This device may have been added with another device file.
[   145.973] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event8)
[   145.973] (II) No input driver specified, ignoring this device.
[   145.973] (II) This device may have been added with another device file.
[   145.975] (II) config/udev: Adding input device ELAN2514:00 04F3:2402 (/dev/input/event9)
[   145.975] (**) ELAN2514:00 04F3:2402: Applying InputClass "libinput touchscreen catchall"
[   145.975] (II) Using input driver 'libinput' for 'ELAN2514:00 04F3:2402'
[   145.975] (**) ELAN2514:00 04F3:2402: always reports core events
[   145.975] (**) Option "Device" "/dev/input/event9"
[   145.975] (**) Option "_source" "server/udev"
[   145.978] (II) event9  - ELAN2514:00 04F3:2402: is tagged by udev as: Touchscreen
[   145.978] (II) event9  - ELAN2514:00 04F3:2402: device is a touch device
[   145.978] (II) event9  - ELAN2514:00 04F3:2402: device removed
[   146.035] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:00/i2c-0/i2c-ELAN2514:00/0018:04F3:2402.0001/input/input19/event9"
[   146.035] (II) XINPUT: Adding extended input device "ELAN2514:00 04F3:2402" (type: TOUCHSCREEN, id 8)
[   146.035] (**) Option "AccelerationScheme" "none"
[   146.035] (**) ELAN2514:00 04F3:2402: (accel) selected scheme none/0
[   146.035] (**) ELAN2514:00 04F3:2402: (accel) acceleration factor: 2.000
[   146.035] (**) ELAN2514:00 04F3:2402: (accel) acceleration threshold: 4
[   146.038] (II) event9  - ELAN2514:00 04F3:2402: is tagged by udev as: Touchscreen
[   146.038] (II) event9  - ELAN2514:00 04F3:2402: device is a touch device
[   146.039] (II) config/udev: Adding input device ELAN2514:00 04F3:2402 (/dev/input/mouse0)
[   146.039] (II) No input driver specified, ignoring this device.
[   146.039] (II) This device may have been added with another device file.
[   146.040] (II) config/udev: Adding input device ELAN2514:00 04F3:2402 (/dev/input/event10)
[   146.040] (**) ELAN2514:00 04F3:2402: Applying InputClass "libinput tablet catchall"
[   146.040] (II) Using input driver 'libinput' for 'ELAN2514:00 04F3:2402'
[   146.040] (**) ELAN2514:00 04F3:2402: always reports core events
[   146.040] (**) Option "Device" "/dev/input/event10"
[   146.040] (**) Option "_source" "server/udev"
[   146.041] (II) event10 - ELAN2514:00 04F3:2402: is tagged by udev as: Tablet
[   146.077] (II) event10 - ELAN2514:00 04F3:2402: tablet 'ELAN2514:00 04F3:2402' unknown to libwacom
[   146.077] (II) event10 - ELAN2514:00 04F3:2402: device is a tablet
[   146.077] (II) event10 - ELAN2514:00 04F3:2402: device removed
[   146.132] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:00/i2c-0/i2c-ELAN2514:00/0018:04F3:2402.0001/input/input22/event10"
[   146.132] (II) XINPUT: Adding extended input device "ELAN2514:00 04F3:2402" (type: TABLET, id 9)
[   146.134] (II) event10 - ELAN2514:00 04F3:2402: is tagged by udev as: Tablet
[   146.135] (II) event10 - ELAN2514:00 04F3:2402: tablet 'ELAN2514:00 04F3:2402' unknown to libwacom
[   146.135] (II) event10 - ELAN2514:00 04F3:2402: device is a tablet
[   146.136] (II) config/udev: Adding input device ELAN2514:00 04F3:2402 (/dev/input/mouse1)
[   146.136] (II) No input driver specified, ignoring this device.
[   146.136] (II) This device may have been added with another device file.
[   146.137] (II) config/udev: Adding input device SYNA3290:01 06CB:CD4F Touchpad (/dev/input/event11)
[   146.137] (**) SYNA3290:01 06CB:CD4F Touchpad: Applying InputClass "libinput touchpad catchall"
[   146.137] (II) Using input driver 'libinput' for 'SYNA3290:01 06CB:CD4F Touchpad'
[   146.137] (**) SYNA3290:01 06CB:CD4F Touchpad: always reports core events
[   146.137] (**) Option "Device" "/dev/input/event11"
[   146.137] (**) Option "_source" "server/udev"
[   146.141] (II) event11 - SYNA3290:01 06CB:CD4F Touchpad: is tagged by udev as: Touchpad
[   146.143] (II) event11 - SYNA3290:01 06CB:CD4F Touchpad: device is a touchpad
[   146.143] (II) event11 - SYNA3290:01 06CB:CD4F Touchpad: device removed
[   146.208] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-1/i2c-SYNA3290:01/0018:06CB:CD4F.0002/input/input26/event11"
[   146.208] (II) XINPUT: Adding extended input device "SYNA3290:01 06CB:CD4F Touchpad" (type: TOUCHPAD, id 10)
[   146.210] (**) Option "AccelerationScheme" "none"
[   146.210] (**) SYNA3290:01 06CB:CD4F Touchpad: (accel) selected scheme none/0
[   146.210] (**) SYNA3290:01 06CB:CD4F Touchpad: (accel) acceleration factor: 2.000
[   146.210] (**) SYNA3290:01 06CB:CD4F Touchpad: (accel) acceleration threshold: 4
[   146.213] (II) event11 - SYNA3290:01 06CB:CD4F Touchpad: is tagged by udev as: Touchpad
[   146.215] (II) event11 - SYNA3290:01 06CB:CD4F Touchpad: device is a touchpad
[   146.216] (II) config/udev: Adding input device SYNA3290:01 06CB:CD4F Touchpad (/dev/input/mouse2)
[   146.216] (II) No input driver specified, ignoring this device.
[   146.216] (II) This device may have been added with another device file.
[   146.218] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[   146.218] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   146.218] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   146.218] (**) AT Translated Set 2 keyboard: always reports core events
[   146.218] (**) Option "Device" "/dev/input/event3"
[   146.218] (**) Option "_source" "server/udev"
[   146.219] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   146.220] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[   146.220] (II) event3  - AT Translated Set 2 keyboard: device removed
[   146.262] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[   146.262] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   146.264] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   146.264] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[   146.266] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[   146.266] (II) No input driver specified, ignoring this device.
[   146.266] (II) This device may have been added with another device file.
[   146.267] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4)
[   146.267] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[   146.267] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[   146.267] (**) HP Wireless hotkeys: always reports core events
[   146.267] (**) Option "Device" "/dev/input/event4"
[   146.267] (**) Option "_source" "server/udev"
[   146.268] (II) event4  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[   146.268] (II) event4  - HP Wireless hotkeys: device is a keyboard
[   146.268] (II) event4  - HP Wireless hotkeys: device removed
[   146.315] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event4"
[   146.315] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 12)
[   146.317] (II) event4  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[   146.317] (II) event4  - HP Wireless hotkeys: device is a keyboard
[   146.318] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[   146.318] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   146.318] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[   146.318] (**) HP WMI hotkeys: always reports core events
[   146.318] (**) Option "Device" "/dev/input/event6"
[   146.318] (**) Option "_source" "server/udev"
[   146.319] (II) event6  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[   146.319] (II) event6  - HP WMI hotkeys: device is a keyboard
[   146.319] (II) event6  - HP WMI hotkeys: device removed
[   146.382] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[   146.382] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[   146.383] (II) event6  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[   146.383] (II) event6  - HP WMI hotkeys: device is a keyboard
[   152.135] (II) event2  - Video Bus: device removed
[   152.182] (II) event0  - Power Button: device removed
[   152.208] (II) event9  - ELAN2514:00 04F3:2402: device removed
[   152.262] (II) event10 - ELAN2514:00 04F3:2402: device removed
[   152.315] (II) event11 - SYNA3290:01 06CB:CD4F Touchpad: device removed
[   152.369] (II) event3  - AT Translated Set 2 keyboard: device removed
[   152.395] (II) event4  - HP Wireless hotkeys: device removed
[   152.449] (II) event6  - HP WMI hotkeys: device removed
[   152.502] (II) AIGLX: Suspending AIGLX clients for VT switch

My Xorg.conf:

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/OTF"
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/100dpi"
	FontPath     "/usr/share/fonts/75dpi"
EndSection

Section "Module"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "Accel"              	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI3"               	# [<bool>]
        #Option     "DRI"                	# <i>
        #Option     "ShadowPrimary"      	# [<bool>]
        #Option     "TearFree"           	# [<bool>]
        #Option     "DeleteUnusedDP12Displays" 	# [<bool>]
        #Option     "VariableRefresh"    	# [<bool>]
	Identifier  "Card0"
	Driver      "amdgpu"
	BusID       "PCI:4:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "Accel"              	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI3"               	# [<bool>]
        #Option     "DRI"                	# <i>
        #Option     "ShadowPrimary"      	# [<bool>]
        #Option     "TearFree"           	# [<bool>]
        #Option     "DeleteUnusedDP12Displays" 	# [<bool>]
        #Option     "VariableRefresh"    	# [<bool>]
	Identifier  "Card1"
	Driver      "amdgpu"
	BusID       "PCI:4:0:1"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

What the heck is the issue here?  Am I off base to assume issues with the touchscreen? The system works fine in Windows 10 but screen goes black even when booting Ubuntu, Manjaro or Clonezilla live images but Weston does work (same error when trying to launch SDDM through Weston-terminal though).   Am I screwed as far as linux goes with this configuration?

Last edited by MorningWood (2019-10-17 04:20:57)

Offline

#2 2019-10-16 11:28:02

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 11,911

Re: [SOLVED] Ryzen 7 3700U/RX Vega 10 APU Video Issues

Maybe not.


Running the Xorg configuration

https://wiki.archlinux.org/index.php/Xorg#Configuration , check the colored box.

For testing an X setup you want to keep things as simple as possible :
- Do not create any configuration files
- add systemd.unit=multi-user.target to the kernel line to make 200% certain you boot into multi-user.target
- use startx or xinit to get a simple[1] graphics environment

Boot, start X , post xorg log .


[1]
a simple Window Manager (like twm) with a few xterms is more then enough to test X .
Some people prefer starting a xterm only.

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.


(A works at time B)  && (time C > time B ) ≠  (A works at time C)

Offline

#3 2019-10-17 03:16:14

MorningWood
Member
Registered: 2008-06-06
Posts: 78

Re: [SOLVED] Ryzen 7 3700U/RX Vega 10 APU Video Issues

Lone_Wolf wrote:

Maybe not.


Running the Xorg configuration

https://wiki.archlinux.org/index.php/Xorg#Configuration , check the colored box.

For testing an X setup you want to keep things as simple as possible :
- Do not create any configuration files
- add systemd.unit=multi-user.target to the kernel line to make 200% certain you boot into multi-user.target
- use startx or xinit to get a simple[1] graphics environment

Boot, start X , post xorg log .


[1]
a simple Window Manager (like twm) with a few xterms is more then enough to test X .
Some people prefer starting a xterm only.

:facepalm: I forgot to install xterm.  Thanks for the help, Lone_Wolf.  That completely fixed my issue.

Last edited by MorningWood (2019-10-17 03:16:40)

Offline

Pages: 1

Board footer

Powered by FluxBB