Arch Linux

oscarbranson

Member

Registered: 2017-09-28

Posts: 13

Hang for ~40 seconds when waking from suspend.

I have a clean Arch install on a brand new PC (spec below) which hangs for between 30-60 seconds when resuming from Suspend (*not* Hibernate). The behaviour during this hang varies: sometimes it's a black screen with a cursor in the top left (no text), and other times there's some text output (see below) which is occasionally repeated multiple times.

I've been using Arch for a while on another PC, but have never seen anything like these messages before and am unsure how to diagnose them. Extensive googling hasn't turned up much. Any help or pointers greatly appreciated!

Hardware:
AMD Ryzen 9 3900X (with initrd /amd-ucode.img in systemd-boot entry)
NVIDIA RTX 2080 Super (rev a1)
ASRock Taichi X570

Software:
Kernel: 5.3.7-arch1-1-ARCH
NVIDIA Driver: 435.21-13

Text during hang (most of the time once, occasionally repeated multiple times):

[timestamp] ata1: failed stop FIS RX (-16)
[timestamp] snd_hda_intel 0000:0d:00.1: spurious response 0x0:0x0, last_cmd=0x6f2f0a
[timestamp] snd_hda_intel 0000:0d:00.1: spurious response 0x0:0x0, last_cmd=0x6f2f0a
[timestamp] snd_hda_intel 0000:0d:00.1: spurious response 0x0:0x0, last_cmd=0x6f2f0a
[timestamp] snd_hda_intel 0000:0d:00.1: spurious response 0x0:0x0, last_cmd=0x6f2f0a
[timestamp] snd_hda_intel 0000:0d:00.1: spurious response 0x0:0x0, last_cmd=0x6f2f0a
[timestamp] snd_hda_intel 0000:0d:00.1: spurious response 0x0:0x0, last_cmd=0x6f2f0a
[timestamp] snd_hda_intel 0000:0d:00.1: spurious response 0xc0:0x0, last_cmd=0x6f2f0a
[timestamp] snd_hda_intel 0000:0d:00.1: spurious response 0x0:0x0, last_cmd=0x6f2f0a
[timestamp] snd_hda_intel 0000:0d:00.1: spurious response 0x84:0x0, last_cmd=0x6f2f0a
[timestamp] snd_hda_intel 0000:0d:00.1: spurious response 0x1b:0x0, last_cmd=0x6f2f0a
[timestamp] hub 3-4.4:1.0: hub_ext_port_status failed (err = -71)
[timestamp] hub 3-4.4:1.0: hub_ext_port_status failed (err = -71)
[timestamp] usb 3-4.4-port2: cannot disable (err = -71)
[timestamp] PM: dpm_run_callback(): ucsi_ccg_resume+0x0/0x20 [ucsi_ccg] returns -110
[timestamp] PM: Device 0-0008 failed to resume: error -110

theodore

Member

Registered: 2008-09-09

Posts: 151

Re: Hang for ~40 seconds when waking from suspend.

Check this thread https://bbs.archlinux.org/viewtopic.php?id=250192 you might need to blacklist the same module.

stilvoid

Member

From: UK

Registered: 2011-11-29

Posts: 2

Re: Hang for ~40 seconds when waking from suspend.

I had this problem too except that my machine never fully returned from suspend. Blacklisting ucsi_ccg solves the problem but leaves me without USB-C I'd guess (which I don't use anyway on this system).

Edit: confirm that blacklisting i2c_nvidia_gpu works too. I'd guess that's more appropriate

Last edited by stilvoid (2019-10-25 09:40:34)