You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2019-10-26 11:04:35
- insciwetrust
- Member
- Registered: 2019-10-19
- Posts: 88
I/O Error While Trying to Access A Folder
I have a NTFS external harddisk with 1TB of storage. I installed ntfs-3g and mounted it, which allowed me to open and browse it. However, after I ejected it and then plugged it again, I encountered an error: "Failed to open directory, error when getting information for file '/run/media/insciencewetrust/26B.../sudeplaylist.txt': Input/Output error." Yes, I'd love to get rid of ntfs and format it with ext4 but my backup files are in there and I need them so formatting isn't an option.
Last edited by insciwetrust (2019-10-26 11:31:37)
No gods, no masters!
Offline
#2 2019-10-26 12:17:05
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,526
- Website
Re: I/O Error While Trying to Access A Folder
insciwetrust wrote:
I'd love to get rid of ntfs and format it with ext4 but my backup files are in there and I need them so formatting isn't an option.
Where else are they? If these same files don't also reside on some other accessible storage medium, then these are not backup files, they're just files. And if you need them (i.e., they're important), then you really should have an actual backup copy. This is especially true as one potential cause of the error you are seeing could be early signs of the drive failing - I'd certainly not jump to this as a likely diagnosis yet, but it's in the set of possible explanations.
Step 0 for this issue would first be creating an actual backup of your important files. And at that point, you'd be free to reformat that drive as you wish and put the files back on it.
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
#3 2019-10-26 13:46:33
- insciwetrust
- Member
- Registered: 2019-10-19
- Posts: 88
Re: I/O Error While Trying to Access A Folder
Trilby wrote:
insciwetrust wrote:I'd love to get rid of ntfs and format it with ext4 but my backup files are in there and I need them so formatting isn't an option.
Where else are they? If these same files don't also reside on some other accessible storage medium, then these are not backup files, they're just files. And if you need them (i.e., they're important), then you really should have an actual backup copy. This is especially true as one potential cause of the error you are seeing could be early signs of the drive failing - I'd certainly not jump to this as a likely diagnosis yet, but it's in the set of possible explanations.
Step 0 for this issue would first be creating an actual backup of your important files. And at that point, you'd be free to reformat that drive as you wish and put the files back on it.
I recently switched to Arch on my desktop and therefore those were the only copies. How can I create a backup at this point?
Last edited by insciwetrust (2019-10-26 13:46:42)
No gods, no masters!
Offline
#4 2019-10-26 14:06:51
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,526
- Website
Re: I/O Error While Trying to Access A Folder
Generally: https://wiki.archlinux.org/index.php/Sy … p_programs
Specifically, I have no idea, as only you know how much data is there and what other devices you have at your disposal.
Have you tried unmounting and remounting the 1TB drive again? Do you get the exact same error repeatedly, or do you get related errors? Or does it work sometimes?
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
#5 2019-10-26 14:18:38
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,272
Re: I/O Error While Trying to Access A Folder
Please post a complete dmesg after attempting to access such files and also see https://wiki.archlinux.org/index.php/SMART
If you're lucky, it's a bus error. If not, the disk is toast…
Offline
#6 2019-10-26 14:41:35
- insciwetrust
- Member
- Registered: 2019-10-19
- Posts: 88
Re: I/O Error While Trying to Access A Folder
Trilby wrote:
Generally: https://wiki.archlinux.org/index.php/Sy … p_programs
Specifically, I have no idea, as only you know how much data is there and what other devices you have at your disposal.
Have you tried unmounting and remounting the 1TB drive again? Do you get the exact same error repeatedly, or do you get related errors? Or does it work sometimes?
I tried it, gives the exact same error.
seth wrote:
Please post a complete dmesg after attempting to access such files and also see https://wiki.archlinux.org/index.php/SMART
If you're lucky, it's a bus error. If not, the disk is toast…
I installed it and tried to use smart using the command below but it didn't return me anything. Maybe I am doing something wrong.
smartctl --info /dev/sda | grep 'SMART support is:'I couldn't run a test either, I am not sure what exactly is a -T permissive option.
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.7-arch1-1-ARCH] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.I wasn't sure which part to copy so I copied it all, pardon me.
[ 0.805153] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.805154] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[ 0.805155] pci_bus 0000:00: root bus resource [mem 0x400000000-0xfffffffff window]
[ 0.805157] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.805167] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[ 0.805298] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.805325] pci 0000:00:03.0: enabling Extended Tags
[ 0.805359] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.805468] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.805591] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.805712] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.805832] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.805940] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.806041] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.806161] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.806181] pci 0000:00:1a.0: reg 0x10: [mem 0xfbefc000-0xfbefc3ff]
[ 0.806259] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.806358] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.806377] pci 0000:00:1b.0: reg 0x10: [mem 0xfbef8000-0xfbefbfff 64bit]
[ 0.806446] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.806538] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.806656] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.806759] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.806881] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.806985] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.807005] pci 0000:00:1d.0: reg 0x10: [mem 0xfbef6000-0xfbef63ff]
[ 0.807083] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.807186] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.807323] pci 0000:00:1f.0: [8086:3b0a] type 00 class 0x060100
[ 0.807514] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[ 0.807530] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07]
[ 0.807537] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883]
[ 0.807543] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807]
[ 0.807550] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483]
[ 0.807556] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc41f]
[ 0.807563] pci 0000:00:1f.2: reg 0x24: [mem 0xfbef4000-0xfbef47ff]
[ 0.807601] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.807695] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.807712] pci 0000:00:1f.3: reg 0x10: [mem 0xfbef2000-0xfbef20ff 64bit]
[ 0.807730] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.807859] pci 0000:01:00.0: [1002:6819] type 00 class 0x030000
[ 0.807878] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.807887] pci 0000:01:00.0: reg 0x18: [mem 0xfbf80000-0xfbfbffff 64bit]
[ 0.807893] pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.807903] pci 0000:01:00.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
[ 0.807908] pci 0000:01:00.0: enabling Extended Tags
[ 0.807956] pci 0000:01:00.0: supports D1 D2
[ 0.807957] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.807986] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:03.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.808026] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.808043] pci 0000:01:00.1: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
[ 0.808071] pci 0000:01:00.1: enabling Extended Tags
[ 0.808108] pci 0000:01:00.1: supports D1 D2
[ 0.820476] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.820479] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 0.820481] pci 0000:00:03.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.820485] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.820526] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.820571] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.820571] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.820571] pci 0000:03:00.0: reg 0x18: [mem 0xfafff000-0xfaffffff 64bit pref]
[ 0.820571] pci 0000:03:00.0: reg 0x20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
[ 0.820640] pci 0000:03:00.0: supports D1 D2
[ 0.820642] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.830481] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.830484] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.830490] pci 0000:00:1c.5: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.830506] pci_bus 0000:04: extended config space not accessible
[ 0.830557] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.830564] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.830566] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.830567] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.830568] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.830569] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 0.830570] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[ 0.830572] pci 0000:00:1e.0: bridge window [mem 0x400000000-0xfffffffff window] (subtractive decode)
[ 0.831446] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.831514] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.831579] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.831646] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.831712] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.831778] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.831844] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.831911] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.833804] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.833806] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.833807] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.833808] vgaarb: loaded
[ 0.833949] ACPI: bus type USB registered
[ 0.833962] usbcore: registered new interface driver usbfs
[ 0.833967] usbcore: registered new interface driver hub
[ 0.833991] usbcore: registered new device driver usb
[ 0.834010] pps_core: LinuxPPS API ver. 1 registered
[ 0.834010] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.834012] PTP clock support registered
[ 0.834020] EDAC MC: Ver: 3.0.0
[ 0.834086] PCI: Using ACPI for IRQ routing
[ 0.838113] PCI: Discovered peer bus ff
[ 0.838114] PCI: root bus ff: using default resources
[ 0.838115] PCI: Probing PCI hardware (bus ff)
[ 0.838135] PCI host bridge to bus 0000:ff
[ 0.838137] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.838138] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.838139] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.838141] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.838145] pci 0000:ff:00.0: [8086:2c51] type 00 class 0x060000
[ 0.838185] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
[ 0.838223] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
[ 0.838258] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
[ 0.838294] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
[ 0.838328] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
[ 0.838365] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.838400] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.838434] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.838468] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.838504] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.838539] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.838573] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.838609] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
[ 0.838646] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
[ 0.838691] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.838692] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.838697] PCI: pci_cache_line_size set to 64 bytes
[ 0.838744] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.838745] e820: reserve RAM buffer [mem 0xbf7a0000-0xbfffffff]
[ 0.838837] NetLabel: Initializing
[ 0.838838] NetLabel: domain hash size = 128
[ 0.838838] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.838852] NetLabel: unlabeled traffic allowed by default
[ 0.840536] clocksource: Switched to clocksource tsc-early
[ 0.852989] VFS: Disk quotas dquot_6.6.0
[ 0.853007] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.853035] *** VALIDATE hugetlbfs ***
[ 0.853075] pnp: PnP ACPI init
[ 0.853170] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.853172] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.853173] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.853174] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.853180] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.853254] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.853511] pnp 00:02: [dma 0 disabled]
[ 0.853560] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.853974] pnp 00:03: [dma 0 disabled]
[ 0.854082] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.854270] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.854271] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.854276] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.854469] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.854472] system 00:05: [io 0x0800-0x087f] has been reserved
[ 0.854474] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.854475] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.854477] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.854478] system 00:05: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.854483] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.854606] system 00:06: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.854610] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.854750] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.854752] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.854756] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.854831] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.854835] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.855088] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.855090] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.855091] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.855092] system 00:09: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.855094] system 00:09: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.855098] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.855250] pnp: PnP ACPI: found 10 devices
[ 0.856590] thermal_sys: Registered thermal governor 'fair_share'
[ 0.856591] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.856596] thermal_sys: Registered thermal governor 'step_wise'
[ 0.856597] thermal_sys: Registered thermal governor 'user_space'
[ 0.856598] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.861122] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.861156] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.861158] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.861160] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.861162] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000 add_align 100000
[ 0.861170] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.861174] pci 0000:00:1c.0: BAR 15: assigned [mem 0x400000000-0x4001fffff 64bit pref]
[ 0.861176] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0200000-0xc05fffff]
[ 0.861178] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.861181] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.861183] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 0.861186] pci 0000:00:03.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.861188] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.861192] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.861194] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.861197] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.861200] pci 0000:00:1c.0: bridge window [mem 0x400000000-0x4001fffff 64bit pref]
[ 0.861204] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.861206] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.861210] pci 0000:00:1c.5: bridge window [mem 0xc0200000-0xc05fffff]
[ 0.861212] pci 0000:00:1c.5: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.861217] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.861226] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.861227] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.861228] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.861229] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.861230] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
[ 0.861231] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.861232] pci_bus 0000:00: resource 10 [mem 0x400000000-0xfffffffff window]
[ 0.861233] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.861234] pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.861236] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.861237] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.861238] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.861239] pci_bus 0000:02: resource 2 [mem 0x400000000-0x4001fffff 64bit pref]
[ 0.861240] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.861241] pci_bus 0000:03: resource 1 [mem 0xc0200000-0xc05fffff]
[ 0.861242] pci_bus 0000:03: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.861244] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.861245] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.861246] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.861247] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.861248] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xdfffffff window]
[ 0.861250] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.861251] pci_bus 0000:04: resource 10 [mem 0x400000000-0xfffffffff window]
[ 0.861326] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.861327] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.861357] NET: Registered protocol family 2
[ 0.861493] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.861520] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.861663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.861922] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.861958] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.862018] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.862102] NET: Registered protocol family 1
[ 0.862107] NET: Registered protocol family 44
[ 0.862533] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.862540] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.862596] PCI: CLS 32 bytes, default 64
[ 0.862632] Trying to unpack rootfs image as initramfs...
[ 0.988043] Freeing initrd memory: 8944K
[ 0.988051] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.988053] software IO TLB: mapped [mem 0xbb7a0000-0xbf7a0000] (64MB)
[ 0.988257] check: Scanning for low memory corruption every 60 seconds
[ 0.988670] Initialise system trusted keyrings
[ 0.988678] Key type blacklist registered
[ 0.988729] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.990046] zbud: loaded
[ 0.995116] Key type asymmetric registered
[ 0.995117] Asymmetric key parser 'x509' registered
[ 0.995124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.995165] io scheduler mq-deadline registered
[ 0.995166] io scheduler kyber registered
[ 0.995190] io scheduler bfq registered
[ 0.995563] pcieport 0000:00:03.0: PME: Signaling with IRQ 24
[ 0.995619] pcieport 0000:00:03.0: AER: enabled with IRQ 24
[ 0.995670] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.995816] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[ 0.995839] pcieport 0000:00:1c.0: pciehp: Slot #128 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.996059] pcieport 0000:00:1c.5: PME: Signaling with IRQ 26
[ 0.996082] pcieport 0000:00:1c.5: pciehp: Slot #133 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.996187] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.996254] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 0.996255] vesafb: scrolling: redraw
[ 0.996256] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.996268] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 5632k, total 5632k
[ 0.996308] fbcon: Deferring console take-over
[ 0.996309] fb0: VESA VGA frame buffer device
[ 0.996320] intel_idle: MWAIT substates: 0x1120
[ 0.996320] intel_idle: v0.4.1 model 0x1E
[ 0.996605] intel_idle: lapic_timer_reliable_states 0x2
[ 0.996672] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.996679] ACPI: Power Button [PWRB]
[ 0.996713] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.999764] ACPI: Power Button [PWRF]
[ 1.000623] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.021346] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.022956] hpet_acpi_add: no address or irqs in _CRS
[ 1.022972] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.022973] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.025408] usbcore: registered new interface driver usbserial_generic
[ 1.025421] usbserial: USB Serial support registered for generic
[ 1.025444] rtc_cmos 00:01: RTC can wake from S4
[ 1.025731] rtc_cmos 00:01: registered as rtc0
[ 1.025772] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 1.025866] intel_pstate: CPU model not supported
[ 1.026726] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.027061] NET: Registered protocol family 10
[ 1.037639] Segment Routing with IPv6
[ 1.037683] NET: Registered protocol family 17
[ 1.039718] RAS: Correctable Errors collector initialized.
[ 1.039822] microcode: sig=0x106e5, pf=0x2, revision=0x1
[ 1.040266] microcode: Microcode Update Driver: v2.2.
[ 1.040286] sched_clock: Marking stable (1040072432, 175414)->(1064727034, -24479188)
[ 1.041265] registered taskstats version 1
[ 1.041270] Loading compiled-in X.509 certificates
[ 1.046645] Loaded X.509 cert 'Build time autogenerated kernel key: a8f69e58fd882cfcd2571a1f28e21cb64150108f'
[ 1.046666] zswap: loaded using pool lzo/zbud
[ 1.056555] Key type big_key registered
[ 1.057013] PM: Magic number: 7:484:884
[ 1.057199] rtc_cmos 00:01: setting system clock to 2019-10-26T11:51:28 UTC (1572090688)
[ 1.058954] Freeing unused decrypted memory: 2040K
[ 1.059342] Freeing unused kernel image memory: 1632K
[ 1.099885] Write protecting the kernel read-only data: 18432k
[ 1.100701] Freeing unused kernel image memory: 2012K
[ 1.100917] Freeing unused kernel image memory: 144K
[ 1.111483] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.111569] x86/mm: Checking user space page tables
[ 1.121928] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.121930] Run /init as init process
[ 1.138912] fbcon: Taking over console
[ 1.138990] Console: switching to colour frame buffer device 200x56
[ 1.384259] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.387466] ehci-pci: EHCI PCI platform driver
[ 1.387700] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.387709] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.387722] ehci-pci 0000:00:1a.0: debug port 2
[ 1.391634] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[ 1.391653] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbefc000
[ 1.394454] SCSI subsystem initialized
[ 1.402995] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.403046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.403048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.403049] usb usb1: Product: EHCI Host Controller
[ 1.403050] usb usb1: Manufacturer: Linux 5.3.7-arch1-1-ARCH ehci_hcd
[ 1.403051] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.403172] libata version 3.00 loaded.
[ 1.403193] hub 1-0:1.0: USB hub found
[ 1.403200] hub 1-0:1.0: 2 ports detected
[ 1.403527] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.403531] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.403542] ehci-pci 0000:00:1d.0: debug port 2
[ 1.407469] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[ 1.407485] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbef6000
[ 1.409339] ahci 0000:00:1f.2: version 3.0
[ 1.409508] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.419795] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.419845] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.419850] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.419878] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.419879] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.419880] usb usb2: Product: EHCI Host Controller
[ 1.419881] usb usb2: Manufacturer: Linux 5.3.7-arch1-1-ARCH ehci_hcd
[ 1.419883] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.420206] hub 2-0:1.0: USB hub found
[ 1.420222] hub 2-0:1.0: 2 ports detected
[ 1.470768] scsi host0: ahci
[ 1.471309] scsi host1: ahci
[ 1.471952] scsi host2: ahci
[ 1.472481] scsi host3: ahci
[ 1.472900] scsi host4: ahci
[ 1.473244] scsi host5: ahci
[ 1.473309] ata1: SATA max UDMA/133 abar m2048@0xfbef4000 port 0xfbef4100 irq 27
[ 1.473311] ata2: SATA max UDMA/133 abar m2048@0xfbef4000 port 0xfbef4180 irq 27
[ 1.473312] ata3: SATA max UDMA/133 abar m2048@0xfbef4000 port 0xfbef4200 irq 27
[ 1.473314] ata4: SATA max UDMA/133 abar m2048@0xfbef4000 port 0xfbef4280 irq 27
[ 1.473315] ata5: SATA max UDMA/133 abar m2048@0xfbef4000 port 0xfbef4300 irq 27
[ 1.473316] ata6: SATA max UDMA/133 abar m2048@0xfbef4000 port 0xfbef4380 irq 27
[ 1.733135] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.736380] random: fast init done
[ 1.756469] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.789809] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.874739] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[ 1.874743] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.875132] hub 1-1:1.0: USB hub found
[ 1.875302] hub 1-1:1.0: 6 ports detected
[ 1.888093] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[ 1.888097] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.888486] hub 2-1:1.0: USB hub found
[ 1.888734] hub 2-1:1.0: 8 ports detected
[ 1.990606] tsc: Refined TSC clocksource calibration: 2925.891 MHz
[ 1.990619] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2ccd66254, max_idle_ns: 440795348418 ns
[ 1.990768] clocksource: Switched to clocksource tsc
[ 2.092130] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.163946] usb 1-1.3: new low-speed USB device number 3 using ehci-pci
[ 2.170661] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.270236] usb 2-1.5: New USB device found, idVendor=058f, idProduct=6364, bcdDevice= 1.00
[ 2.270240] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.270243] usb 2-1.5: Product: Mass Storage Device
[ 2.270245] usb 2-1.5: Manufacturer: Generic
[ 2.270248] usb 2-1.5: SerialNumber: 058F63646476
[ 2.274271] usb-storage 2-1.5:1.0: USB Mass Storage device detected
[ 2.274456] scsi host6: usb-storage 2-1.5:1.0
[ 2.274546] usbcore: registered new interface driver usb-storage
[ 2.275246] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.276221] usbcore: registered new interface driver uas
[ 2.277451] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c24b, bcdDevice=73.20
[ 2.277454] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.277455] usb 1-1.3: Product: Gaming Keyboard G103
[ 2.277457] usb 1-1.3: Manufacturer: Logitech
[ 2.278741] usbcore: registered new interface driver usbhid
[ 2.278742] usbhid: USB HID core driver
[ 2.280699] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.0-1.5/input1
[ 2.283446] input: Logitech Gaming Keyboard G103 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C24B.0002/input/input2
[ 2.337539] hid-generic 0003:046D:C24B.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Gaming Keyboard G103] on usb-0000:00:1a.0-1.3/input0
[ 2.343463] input: Logitech Gaming Keyboard G103 Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C24B.0003/input/input3
[ 2.400804] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.400958] hid-generic 0003:046D:C24B.0003: input,hiddev1,hidraw2: USB HID v1.10 Device [Logitech Gaming Keyboard G103] on usb-0000:00:1a.0-1.3/input1
[ 2.401402] ata3.00: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max UDMA/100
[ 2.401404] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.401977] ata3.00: configured for UDMA/100
[ 2.402151] scsi 2:0:0:0: Direct-Access ATA WDC WD10EZEX-08M 1A01 PQ: 0 ANSI: 5
[ 2.477275] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[ 2.587285] usb 1-1.5: language id specifier not provided by device, defaulting to English
[ 2.597613] usb 1-1.5: New USB device found, idVendor=1d57, idProduct=ad05, bcdDevice= 0.21
[ 2.597618] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.599461] input: HID 1d57:ad05 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:1D57:AD05.0004/input/input5
[ 2.599602] hid-generic 0003:1D57:AD05.0004: input,hidraw3: USB HID v1.10 Mouse [HID 1d57:ad05] on usb-0000:00:1a.0-1.5/input0
[ 2.677288] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.711294] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.713498] ata4.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN00, max UDMA/133
[ 2.718550] ata4.00: configured for UDMA/133
[ 2.728025] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LN00 PQ: 0 ANSI: 5
[ 2.853974] usb 1-1.6: New USB device found, idVendor=046d, idProduct=082b, bcdDevice=28.25
[ 2.853979] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.853981] usb 1-1.6: Product: Webcam C170
[ 2.853984] usb 1-1.6: Manufacturer:
[ 3.088541] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.302067] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.303067] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.304186] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 3.305330] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 3.308394] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.308396] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 3.308416] sd 2:0:0:0: [sda] Write Protect is off
[ 3.308419] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.308455] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.311054] sd 6:0:0:0: [sde] Attached SCSI removable disk
[ 3.314781] sd 6:0:0:3: [sdb] Attached SCSI removable disk
[ 3.327629] sd 6:0:0:2: [sdc] Attached SCSI removable disk
[ 3.328693] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 3.333956] sda: sda1 sda2
[ 3.335300] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.397191] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.397745] ata6.00: ATA-11: KINGSTON SA400S37120G, SBFK71E0, max UDMA/133
[ 3.397749] ata6.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.398384] ata6.00: configured for UDMA/133
[ 3.398619] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5
[ 3.398896] sd 5:0:0:0: [sdf] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 3.398913] sd 5:0:0:0: [sdf] Write Protect is off
[ 3.398915] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 3.398940] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.399458] sdf: sdf1 sdf2
[ 3.399957] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 3.461544] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.461548] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.462086] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 6.637880] random: crng init done
[ 16.896983] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 17.677054] systemd[1]: systemd 243.78-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 17.694142] systemd[1]: Detected architecture x86-64.
[ 17.699299] systemd[1]: Set hostname to <anarchy>.
[ 18.602676] systemd[1]: Created slice system-dhcpcd.slice.
[ 18.602939] systemd[1]: Created slice system-getty.slice.
[ 18.603142] systemd[1]: Created slice User and Session Slice.
[ 18.603198] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 18.603240] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.603416] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 18.603446] systemd[1]: Reached target Local Encrypted Volumes.
[ 18.639738] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 19.050778] audit: type=1130 audit(1572090706.490:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 19.069756] audit: type=1130 audit(1572090706.510:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 19.098669] systemd-journald[340]: Received client request to flush runtime journal.
[ 19.486818] audit: type=1130 audit(1572090706.926:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 19.744345] audit: type=1130 audit(1572090707.183:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.312010] audit: type=1130 audit(1572090707.750:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.507086] audit: type=1130 audit(1572090707.943:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.652763] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
[ 20.652785] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 20.652800] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 20.677136] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 20.746826] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 20.771181] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20190703/utaddress-204)
[ 20.771188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.771230] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 20.777689] parport_pc 00:03: reported by Plug and Play ACPI
[ 20.777746] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 20.798696] mousedev: PS/2 mouse device common for all mice
[ 21.071761] Linux agpgart interface v0.103
[ 21.072148] gpio_ich gpio_ich.1.auto: GPIO from 436 to 511
[ 21.072340] ppdev: user-space parallel port driver
[ 21.088331] mc: Linux media interface: v0.10
[ 21.088337] iTCO_vendor_support: vendor-support=0
[ 21.091533] libphy: r8169: probed
[ 21.092162] r8169 0000:03:00.0 eth0: RTL8168d/8111d, 00:e0:4c:68:01:50, XID 281, IRQ 28
[ 21.092165] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 21.174077] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 21.184389] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 21.184441] iTCO_wdt: Found a Q57 TCO device (Version=2, TCOBASE=0x0860)
[ 21.184601] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.208652] r8169 0000:03:00.0 ens133: renamed from eth0
[ 21.265895] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 21.265897] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 21.290766] usbcore: registered new interface driver snd-usb-audio
[ 21.301363] videodev: Linux video capture interface: v2.00
[ 21.312736] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 21.312739] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.312740] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 21.312741] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 21.312742] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 21.312743] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 21.312745] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 21.312757] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 21.312758] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 21.325129] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 21.325219] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 21.325304] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 21.333129] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input10
[ 21.333221] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input11
[ 21.333310] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
[ 21.333393] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
[ 21.333470] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
[ 21.333548] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
[ 21.464853] uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
[ 21.486151] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 21.486155] uvcvideo 1-1.6:1.0: Entity type for entity Extension 6 was not initialized!
[ 21.486157] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 21.486271] input: Webcam C170: Webcam C170 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16
[ 21.486377] usbcore: registered new interface driver uvcvideo
[ 21.486379] USB Video Class driver (1.1.1)
[ 21.534447] [drm] radeon kernel modesetting enabled.
[ 21.534507] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
[ 21.534509] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xfbf80000 -> 0xfbfbffff
[ 21.534511] checking generic (d0000000 580000) vs hw (d0000000 10000000)
[ 21.534511] fb0: switching to radeondrmfb from VESA VGA
[ 21.534702] Console: switching to colour dummy device 80x25
[ 21.534749] radeon 0000:01:00.0: vgaarb: deactivate vga console
[ 21.535035] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6819 0x1043:0x3011 0x00).
[ 21.535077] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[ 21.535081] caller pci_map_rom+0x6a/0x17d mapping multiple BARs
[ 21.535084] radeon 0000:01:00.0: No more image in the PCI ROM
[ 21.535111] ATOM BIOS: 6819HB.15.44.0.4.AS01
[ 21.535184] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 21.535186] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[ 21.535190] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 21.535191] [drm] RAM width 256bits DDR
[ 21.535359] [TTM] Zone kernel: Available graphics memory: 4072774 KiB
[ 21.535359] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 21.535360] [TTM] Initializing pool allocator
[ 21.535366] [TTM] Initializing DMA pool allocator
[ 21.535381] [drm] radeon: 2048M of VRAM memory ready
[ 21.535382] [drm] radeon: 2048M of GTT memory ready.
[ 21.535390] [drm] Loading pitcairn Microcode
[ 21.934322] [drm] Internal thermal controller with fan control
[ 21.949285] [drm] radeon: dpm initialized
[ 22.020072] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 22.020089] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 22.024480] [drm] PCIE gen 2 link speeds already enabled
[ 22.053473] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 22.053635] radeon 0000:01:00.0: WB enabled
[ 22.053641] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000008ce6c85e
[ 22.053645] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x0000000051ff3ae9
[ 22.053648] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0000000041bf59b2
[ 22.053651] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x0000000034ca7bea
[ 22.053654] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000003c62c3dd
[ 22.054177] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x0000000073b52cb9
[ 22.074434] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0x00000000eeb288e2
[ 22.074438] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0x00000000d82e93b4
[ 22.074441] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 22.074442] [drm] Driver supports precise vblank timestamp query.
[ 22.074445] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 22.074502] radeon 0000:01:00.0: radeon: using MSI.
[ 22.074542] [drm] radeon: irq initialized.
[ 22.243419] Adding 4194300k swap on /dev/sda1. Priority:-2 extents:1 across:4194300k FS
[ 22.260812] [drm] ring test on 0 succeeded in 3 usecs
[ 22.260817] [drm] ring test on 1 succeeded in 1 usecs
[ 22.260821] [drm] ring test on 2 succeeded in 1 usecs
[ 22.260833] [drm] ring test on 3 succeeded in 6 usecs
[ 22.260841] [drm] ring test on 4 succeeded in 5 usecs
[ 22.437957] [drm] ring test on 5 succeeded in 2 usecs
[ 22.437963] [drm] UVD initialized successfully.
[ 22.511946] audit: type=1130 audit(1572090709.950:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.548065] [drm] ring test on 6 succeeded in 26 usecs
[ 22.548080] [drm] ring test on 7 succeeded in 4 usecs
[ 22.548080] [drm] VCE initialized successfully.
[ 22.548314] [drm] ib test on ring 0 succeeded in 0 usecs
[ 22.548386] [drm] ib test on ring 1 succeeded in 0 usecs
[ 22.548480] [drm] ib test on ring 2 succeeded in 0 usecs
[ 22.548544] [drm] ib test on ring 3 succeeded in 0 usecs
[ 22.548634] [drm] ib test on ring 4 succeeded in 0 usecs
[ 23.003866] audit: type=1130 audit(1572090710.440:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.049315] audit: type=1127 audit(1572090710.486:10): pid=435 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 23.151932] audit: type=1130 audit(1572090710.590:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.217287] [drm] ib test on ring 5 succeeded
[ 23.724076] [drm] ib test on ring 6 succeeded
[ 24.144671] 8021q: 802.1Q VLAN Support v1.8
[ 24.230637] [drm] ib test on ring 7 succeeded
[ 24.232190] [drm] Radeon Display Connectors
[ 24.232192] [drm] Connector 0:
[ 24.232193] [drm] DP-1
[ 24.232195] [drm] HPD4
[ 24.232197] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 24.232199] [drm] Encoders:
[ 24.232200] [drm] DFP1: INTERNAL_UNIPHY2
[ 24.232201] [drm] Connector 1:
[ 24.232202] [drm] HDMI-A-1
[ 24.232203] [drm] HPD5
[ 24.232206] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 24.232207] [drm] Encoders:
[ 24.232208] [drm] DFP2: INTERNAL_UNIPHY2
[ 24.232209] [drm] Connector 2:
[ 24.232210] [drm] DVI-I-1
[ 24.232211] [drm] HPD6
[ 24.232213] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 24.232214] [drm] Encoders:
[ 24.232216] [drm] DFP3: INTERNAL_UNIPHY
[ 24.232217] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 24.232218] [drm] Connector 3:
[ 24.232219] [drm] DVI-D-1
[ 24.232220] [drm] HPD1
[ 24.232223] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 24.232223] [drm] Encoders:
[ 24.232225] [drm] DFP4: INTERNAL_UNIPHY1
[ 24.302030] [drm] fb mappable at 0xD05E1000
[ 24.302032] [drm] vram apper at 0xD0000000
[ 24.302033] [drm] size 5787648
[ 24.302034] [drm] fb depth is 24
[ 24.302035] [drm] pitch is 6400
[ 24.302224] fbcon: radeondrmfb (fb0) is primary device
[ 24.315071] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 24.323777] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 24.323898] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 24.323900] cfg80211: failed to load regulatory.db
[ 24.327922] Console: switching to colour frame buffer device 200x56
[ 24.335818] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 24.378792] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 24.642251] RTL8211B Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 24.788827] r8169 0000:03:00.0 ens133: Link is Down
[ 24.847125] [drm] amdgpu kernel modesetting enabled.
[ 24.847282] CRAT table not found
[ 24.847285] Virtual CRAT table created for CPU
[ 24.847287] Parsing CRAT table with 1 nodes
[ 24.847289] Creating topology SYSFS entries
[ 24.847309] Topology: Add CPU node
[ 24.847309] Finished initializing topology
[ 25.023532] kauditd_printk_skb: 4 callbacks suppressed
[ 25.023536] audit: type=1130 audit(1572090712.460:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 25.346765] audit: type=1130 audit(1572090712.783:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 25.614268] audit: type=1130 audit(1572090713.053:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 25.673942] audit: type=1130 audit(1572090713.110:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 26.218319] r8169 0000:03:00.0 ens133: Link is Up - 100Mbps/Full - flow control rx/tx
[ 26.218335] IPv6: ADDRCONF(NETDEV_CHANGE): ens133: link becomes ready
[ 31.379100] audit: type=1130 audit(1572090718.816:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpcd@ens133 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 31.407708] audit: type=1130 audit(1572090718.846:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 31.543806] audit: type=1130 audit(1572090718.980:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 33.367330] radeon_dp_aux_transfer_native: 74 callbacks suppressed
[ 34.988268] audit: type=1130 audit(1572090722.426:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 35.030859] audit: type=1130 audit(1572090722.470:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 36.033196] audit: type=1131 audit(1572090723.470:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 48.775229] audit: type=1006 audit(1572090736.213:26): pid=550 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[ 48.787358] audit: type=1131 audit(1572090736.226:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 48.845215] audit: type=1130 audit(1572090736.283:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 48.858118] audit: type=1006 audit(1572090736.296:29): pid=558 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 49.276528] audit: type=1130 audit(1572090736.713:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 49.402654] audit: type=1112 audit(1572090736.843:31): pid=550 uid=0 auid=1000 ses=1 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=anarchy addr=? terminal=/dev/tty7 res=success'
[ 51.292860] fuse: init (API version 7.31)
[ 51.930315] audit: type=1130 audit(1572090739.366:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 52.933818] radeon_dp_aux_transfer_native: 74 callbacks suppressed
[ 53.218889] audit: type=1130 audit(1572090740.656:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 54.693813] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 55.380380] audit: type=1131 audit(1572090742.816:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 55.541462] audit: type=1130 audit(1572090742.980:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 55.808107] audit: type=1130 audit(1572090743.246:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 392.426891] perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 624.337100] perf: interrupt took too long (3732 > 3137), lowering kernel.perf_event_max_sample_rate to 53400
[ 948.903256] audit: type=1130 audit(1572091636.340:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 948.903262] audit: type=1131 audit(1572091636.340:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1748.276731] perf: interrupt took too long (4753 > 4665), lowering kernel.perf_event_max_sample_rate to 42000
[ 6460.748916] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[ 6460.866643] usb 2-1.6: New USB device found, idVendor=148f, idProduct=5370, bcdDevice= 1.01
[ 6460.866645] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6460.866646] usb 2-1.6: Product: 802.11 n WLAN
[ 6460.866647] usb 2-1.6: Manufacturer: Ralink
[ 6460.866648] usb 2-1.6: SerialNumber: 1.0
[ 6461.112290] usb 2-1.6: reset high-speed USB device number 4 using ehci-pci
[ 6461.223304] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 6461.254238] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 6461.254734] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6461.255507] usbcore: registered new interface driver rt2800usb
[ 6461.287156] audit: type=1130 audit(1572097148.726:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6461.290416] rt2800usb 2-1.6:1.0 wlp0s29u1u6: renamed from wlan0
[ 6461.323447] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 6461.329575] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 6461.343034] audit: type=1130 audit(1572097148.783:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6466.291319] audit: type=1131 audit(1572097153.730:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6485.726834] audit: type=1111 audit(1572097173.166:42): pid=438 uid=0 auid=4294967295 ses=4294967295 msg='op=connection-add-activate uuid=c0503c27-b33f-4729-98c0-879f339bf54e name="TURKSAT-KABLONET-5E0B-2.4G" pid=741 uid=1000 result=success exe="/usr/bin/NetworkManager" hostname=? addr=? terminal=? res=success'
[ 6487.227961] audit: type=1130 audit(1572097174.666:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6491.924557] wlp0s29u1u6: authenticate with fc:4a:e9:7a:5e:10
[ 6491.957595] wlp0s29u1u6: send auth to fc:4a:e9:7a:5e:10 (try 1/3)
[ 6491.959071] wlp0s29u1u6: authenticated
[ 6491.962121] wlp0s29u1u6: associate with fc:4a:e9:7a:5e:10 (try 1/3)
[ 6491.975486] wlp0s29u1u6: RX AssocResp from fc:4a:e9:7a:5e:10 (capab=0x1411 status=0 aid=1)
[ 6491.982329] wlp0s29u1u6: associated
[ 6492.193725] wlp0s29u1u6: Limiting TX power to 20 (20 - 0) dBm as advertised by fc:4a:e9:7a:5e:10
[ 6492.195289] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29u1u6: link becomes ready
[ 6495.756698] audit: type=1130 audit(1572097183.196:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6506.010939] audit: type=1131 audit(1572097193.450:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6517.279120] audit: type=1131 audit(1572097204.720:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6583.167154] usb 2-1.6: USB disconnect, device number 4
[ 6583.182122] wlp0s29u1u6: deauthenticating from fc:4a:e9:7a:5e:10 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6583.223170] audit: type=1130 audit(1572097270.663:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6583.255867] audit: type=1130 audit(1572097270.696:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6588.226667] audit: type=1131 audit(1572097275.666:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6594.010586] audit: type=1131 audit(1572097281.450:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7780.991797] raid6: sse2x4 gen() 4374 MB/s
[ 7781.048452] raid6: sse2x4 xor() 5747 MB/s
[ 7781.105226] raid6: sse2x2 gen() 9632 MB/s
[ 7781.161793] raid6: sse2x2 xor() 7349 MB/s
[ 7781.218592] raid6: sse2x1 gen() 8053 MB/s
[ 7781.275239] raid6: sse2x1 xor() 6350 MB/s
[ 7781.275240] raid6: using algorithm sse2x2 gen() 9632 MB/s
[ 7781.275241] raid6: .... xor() 7349 MB/s, rmw enabled
[ 7781.275242] raid6: using ssse3x2 recovery algorithm
[ 7781.298266] xor: measuring software checksum speed
[ 7781.328451] prefetch64-sse: 12282.000 MB/sec
[ 7781.361851] generic_sse: 14908.800 MB/sec
[ 7781.361854] xor: using function: generic_sse (14908.800 MB/sec)
[ 7781.585842] Btrfs loaded, crc32c=crc32c-intel
[ 7781.860470] SGI XFS with ACLs, security attributes, realtime, scrub, repair, no debug enabled
[ 7910.096569] audit: type=1130 audit(1572098597.536:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7940.147179] audit: type=1131 audit(1572098627.586:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 9247.108184] audit: type=1130 audit(1572099934.549:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 9277.162189] audit: type=1131 audit(1572099964.603:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 9670.988147] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
[ 9671.166728] usb 2-1.1: New USB device found, idVendor=0bc2, idProduct=231a, bcdDevice= 7.07
[ 9671.166732] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9671.166735] usb 2-1.1: Product: Expansion
[ 9671.166738] usb 2-1.1: Manufacturer: Seagate
[ 9671.166741] usb 2-1.1: SerialNumber: NA85PCHJ
[ 9671.167881] scsi host7: uas
[ 9671.169043] scsi 7:0:0:0: Direct-Access Seagate Expansion 0707 PQ: 0 ANSI: 6
[ 9673.074255] sd 7:0:0:0: [sdg] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[ 9673.074260] sd 7:0:0:0: [sdg] 4096-byte physical blocks
[ 9673.074691] sd 7:0:0:0: [sdg] Write Protect is off
[ 9673.074695] sd 7:0:0:0: [sdg] Mode Sense: 53 00 00 08
[ 9673.075558] sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9673.076182] sd 7:0:0:0: [sdg] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 9673.113368] sdg: sdg1
[ 9673.116856] sd 7:0:0:0: [sdg] Attached SCSI diskLast edited by insciwetrust (2019-10-26 14:45:31)
No gods, no masters!
Offline
#7 2019-10-26 14:54:35
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,272
Re: I/O Error While Trying to Access A Folder
Sure it's sda?
sdf is KINGSTON SA400S37120G (2 partitions), sdg is Seagate Expansion (1 partition) - sda looks more like the drive of your installed system.
There're no I/O errors in that log, not even an NTFS message. (And it's not complete, at least the head is missing)
Also run smartctl as root or sudo.
Offline
#8 2019-10-26 15:28:17
- insciwetrust
- Member
- Registered: 2019-10-19
- Posts: 88
Re: I/O Error While Trying to Access A Folder
seth wrote:
Sure it's sda?
sdf is KINGSTON SA400S37120G (2 partitions), sdg is Seagate Expansion (1 partition) - sda looks more like the drive of your installed system.There're no I/O errors in that log, not even an NTFS message. (And it's not complete, at least the head is missing)
Also run smartctl as root or sudo.
My bad, I copied the command from the wiki and put it here but I know it is /dev/sdg and typed that on my terminal.
I already ran smartctl as sudo.
Last edited by insciwetrust (2019-10-26 15:28:40)
No gods, no masters!
Offline
#9 2019-10-26 15:30:54
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,272
Re: I/O Error While Trying to Access A Folder
Post the output of "sudo smartctl -a /dev/sdg" (ensure the device didn't change in the meantime)
What about the log? It seems to end right after you attached the device and doesn't suggest mount or access or IO errors.
Offline
#10 2019-10-26 15:36:05
- insciwetrust
- Member
- Registered: 2019-10-19
- Posts: 88
Re: I/O Error While Trying to Access A Folder
seth wrote:
Post the output of "sudo smartctl -a /dev/sdg" (ensure the device didn't change in the meantime)
What about the log? It seems to end right after you attached the device and doesn't suggest mount or access or IO errors.
[insciencewetrust@anarchy ~]$ sudo smartctl -a /dev/sdg
[sudo] password for insciencewetrust:
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.7-arch1-1-ARCH] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.I don't know why it doesn't show it, I remounted it after unmounting it and typed dmesg again but the last part stays the same.
You can see the error for yourself: https://i.hizliresim.com/gPGl2Z.png
Last edited by insciwetrust (2019-10-26 15:36:38)
No gods, no masters!
Offline
#11 2019-10-26 15:43:56
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,272
Re: I/O Error While Trying to Access A Folder
Cut out the GUI FM.
Can you enter the path in a bash?
Can you "file /run/media/…/filename.txt?"
What about "stat /run/media/…/filename.txt?"
Is only that file affected?
Edit, stat request.
Last edited by seth (2019-10-26 15:45:01)
Offline
#12 2019-10-26 15:59:45
- insciwetrust
- Member
- Registered: 2019-10-19
- Posts: 88
Re: I/O Error While Trying to Access A Folder
seth wrote:
Cut out the GUI FM.
Can you enter the path in a bash?
Can you "file /run/media/…/filename.txt?"
What about "stat /run/media/…/filename.txt?"
Is only that file affected?Edit, stat request.
I actually tried to delete that file using the terminal (sudo rm) but I got the same error.
So, "file..." returns this:
/run/media/insciencewetrust/26B170820337058D/sudeplaylist.txt: cannot open `/run/media/insciencewetrust/26B170820337058D/sudeplaylist.txt' (Input/output error)And "stat..." returns this:
stat: cannot stat '/run/media/insciencewetrust/26B170820337058D/sudeplaylist.txt': Input/output errorI can access folders in the harddisk though, here is a stat of one directory:
File: /run/media/insciencewetrust/26B170820337058D/Kişisel
Size: 4096 Blocks: 8 IO Block: 4096 directory
Device: 861h/2145d Inode: 11261 Links: 1
Access: (0777/drwxrwxrwx) Uid: ( 1000/insciencewetrust) Gid: ( 1000/insciencewetrust)
Access: 2019-10-25 22:16:22.401840400 +0300
Modify: 2019-10-17 22:37:49.399505000 +0300
Change: 2019-10-25 22:16:21.605393400 +0300
Birth: -Last edited by insciwetrust (2019-10-26 16:02:37)
No gods, no masters!
Offline
#13 2019-10-26 16:02:18
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,272
Re: I/O Error While Trying to Access A Folder
sudo ls -l '/run/media/insciencewetrust/26B170820337058D'
sudo stat '/run/media/insciencewetrust/26B170820337058D/sudeplaylist.txt'Offline
#14 2019-10-26 16:04:24
- insciwetrust
- Member
- Registered: 2019-10-19
- Posts: 88
Re: I/O Error While Trying to Access A Folder
seth wrote:
sudo ls -l '/run/media/insciencewetrust/26B170820337058D' sudo stat '/run/media/insciencewetrust/26B170820337058D/sudeplaylist.txt'
ls: cannot access '/run/media/insciencewetrust/26B170820337058D/sudeplaylist.txt': Input/output error
total 661
-rwxrwxrwx 1 insciencewetrust insciencewetrust 651473 Dec 12 2017 '0113-Eshanlam-_oz_turkce_qarshiliklar_gilavuz_sozluyu(637KB).pdf'
drwxrwxrwx 1 insciencewetrust insciencewetrust 4096 Aug 17 2018 Antarktika
-rwxrwxrwx 1 insciencewetrust insciencewetrust 277 Oct 25 22:08 'Covered Topics (Read their summaries though!)'
drwxrwxrwx 1 insciencewetrust insciencewetrust 4096 Oct 8 2017 DAREBEE
drwxrwxrwx 1 insciencewetrust insciencewetrust 0 Aug 9 17:28 Downloads
drwxrwxrwx 1 insciencewetrust insciencewetrust 0 Jul 21 2018 Fotoğraflar
drwxrwxrwx 1 insciencewetrust insciencewetrust 4096 Oct 16 18:45 ISO
drwxrwxrwx 1 insciencewetrust insciencewetrust 4096 Oct 17 22:37 Kişisel
drwxrwxrwx 1 insciencewetrust insciencewetrust 4096 Jul 21 2018 SQLMap
-????????? ? ? ? ? ? sudeplaylist.txt
drwxrwxrwx 1 insciencewetrust insciencewetrust 0 Jun 13 2017 'System Volume Information'
drwxrwxrwx 1 insciencewetrust insciencewetrust 0 Apr 28 12:32 'Windows Activation'stat: cannot stat '/run/media/insciencewetrust/26B170820337058D/sudeplaylist.txt': Input/output errorNo gods, no masters!
Offline
#15 2019-10-26 16:08:25
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,272
Re: I/O Error While Trying to Access A Folder
Corrupted filesystem, probably not the disk. Run a filesystem check on windows.
I'd worry about the "Fotoğraflar" directory…
Offline
#16 2019-10-26 16:12:44
- insciwetrust
- Member
- Registered: 2019-10-19
- Posts: 88
Re: I/O Error While Trying to Access A Folder
seth wrote:
Corrupted filesystem, probably not the disk. Run a filesystem check on windows.
I'd worry about the "Fotoğraflar" directory…
Ok I'll update once I get my hands on a Windows device. Thank you for your help.
Last edited by insciwetrust (2019-10-26 16:12:59)
No gods, no masters!
Offline
#17 2019-10-27 21:16:04
- insciwetrust
- Member
- Registered: 2019-10-19
- Posts: 88
Re: I/O Error While Trying to Access A Folder
seth wrote:
Corrupted filesystem, probably not the disk. Run a filesystem check on windows.
I'd worry about the "Fotoğraflar" directory…
So I found my oldest laptop which runs Fedora and tried to open it from there, which was successful. Apparently the filesystem was fine and the problem is related to my Arch setups, as I tried to open it on both my laptop and my desktop.
Last edited by insciwetrust (2019-10-27 21:17:07)
No gods, no masters!
Offline
#18 2019-10-27 21:21:43
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,272
Re: I/O Error While Trying to Access A Folder
ntfs or ntfs-3g mount?
Parameters? (essentially the output of "mount" on either system)
Did you run a filesystem check?
Offline
#19 2019-10-28 11:04:14
- insciwetrust
- Member
- Registered: 2019-10-19
- Posts: 88
Re: I/O Error While Trying to Access A Folder
seth wrote:
ntfs or ntfs-3g mount?
Parameters? (essentially the output of "mount" on either system)
Did you run a filesystem check?
ntfs-3g
Output of "mount" on Arch (I can add Fedora's output when I turn it on):
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
dev on /dev type devtmpfs (rw,nosuid,relatime,size=4065384k,nr_inodes=1016346,mode=755)
run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
/dev/sda2 on / type ext4 (rw,relatime)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=15525)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=814552k,mode=700,uid=1000,gid=1000)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)I didn't run a filesystem check.
No gods, no masters!
Offline
Pages: 1