You are not logged in.
Pages: 1
I need to build 2.6.18-rc4 kernel only its been so long since I built one I am kinda stuck
Do I use stock arch pkbuild from ABS .... or one from Wiki?
tried to build beyond ... but url failed ;-(
tomk help!
Mr Green
Offline
Try this, courtesy of tpowa.
Offline
Sweeet I knew you would know where to find it lol
thanks man
could do with a tarball ;-(
Mr Green
Offline
Just go back a directory on that URL - all the files are there.
Offline
I must be going nuts cos I cannot grab em :cry:
Mr Green
Offline
:? I don't know what would cause that. Can you wget them from CLI?
Offline
emmmm wget like in a term scary ... lol
I'll give it a go.....
Ok I got 'em *smacks self*
==> Downloading linux-r1000(103).zip
--14:23:11-- ftp://152.104.238.194/cn/nic/rtl8111brtl8168b/linux-r1000(103).zip
=> `linux-r1000(103).zip'
Connecting to 152.104.238.194:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /cn/nic/rtl8111brtl8168b ... done.
==> PASV ... done. ==> RETR linux-r1000(103).zip ...
No such file `linux-r1000(103).zip'.
==> ERROR: Failed to download linux-r1000(103).zip
==> Aborting...
arrrgghhhhh!!!!!!
Do I need that ?
Mr Green
Offline
It's the r1000 driver for newer Realtek NICs. If you don't need it, remove it from source= and md5sum=, and remove the 4 lines at the end of the PKGBUILD, after
# install r1000 driver for newer realtek network cards
If you do need it, they seem to have released a new version, with a different name, and a different archive format:
ftp://152.104.238.194/cn/nic/rtl8111brt … _v1.04.tgz
Offline
Ok .... thanks tomk ... would like to build it in just in case ...
Need to add
CONFIG_BLK_DEV_JMICRON=y
module 'm' might be better ....
to config ,... thats ok ?
<*> JMicron JMB36x support under <*> Generic PCI IDE Chipset Support
Make sure this is set ?
/me gets on with it
Mr Green
Offline
Emmmm
if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F System.map -b /home/kevin/tmp/pkg -r 2.6.18-rc4-ARCH; fi
scripts/kconfig/conf -s arch/i386/Kconfig
CHK include/linux/version.h
CHK include/linux/utsrelease.h
patch: **** Can't open patch file ../r1000-build.patch : No such file or directory
==> ERROR: Build Failed. Aborting...
patch is there maybe its looking in the wrong place?
Mr Green
Offline
scripts/kconfig/conf -s arch/i386/Kconfig
CHK include/linux/version.h
CHK include/linux/utsrelease.h
patching file src/r1000_n.c
Hunk #1 FAILED at 43.
Hunk #2 FAILED at 1447.
2 out of 2 hunks FAILED -- saving rejects to file src/r1000_n.c.rej
==> ERROR: Build Failed. Aborting...
Now I remember why I stopped rollin' me own ;-(
Mr Green
Offline
try again with new files from dir, updated the kernel to git1 today and fixed also r1000 stuff
Offline
ok ... thanks
I could have just removed those lines as tomk .....
right here we go again
I use wget to grab files is there an option to grab all file from a dir ? only -r wants to d/l everything :?
Mr Green
Offline
Just to let you know, tpowa also has binary packages for the kernel and most modules in that directory. I use them all the time.
Offline
Its just that I need Jmicron modules which I think are not built in ....
May have slipped up added
CONFIG_BLK_DEV_JMICRON=m
not sure if that will work ....
Could do with some help setting it up correctly :?
Mr Green
Offline
Pages: 1