You are not logged in.
- Topics: Active | Unanswered
#1 2020-01-08 04:48:26
- notsomahsoom
- Member
- Registered: 2020-01-07
- Posts: 4
Xorg is using AMD GPU instead of Intel iGPU for Xorg
So, this is proving to be a big battery hog for me. I just found out that Xorg is using AMD HAINAN GPU for hardware acceleration. Is there anyway to switch it to the intel one?
Here is the output of Xorg log.
[ 5.444] (--) Log file renamed from "/var/log/Xorg.pid-446.log" to "/var/log/Xorg.0.log"
[ 5.445]
X.Org X Server 1.20.6
X Protocol Version 11, Revision 0
[ 5.445] Build Operating System: Linux Arch Linux
[ 5.445] Current Operating System: Linux mahsoomarch 5.4.8-arch1-1 #1 SMP PREEMPT Sat, 04 Jan 2020 23:46:18 +0000 x86_64
[ 5.445] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=6098a064-1494-4e47-8e81-e4c3904ae45b splash rw
[ 5.445] Build Date: 04 January 2020 10:10:25AM
[ 5.445]
[ 5.445] Current version of pixman: 0.38.4
[ 5.445] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.445] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.445] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 8 10:09:58 2020
[ 5.448] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.448] (==) No Layout section. Using the first Screen section.
[ 5.448] (==) No screen section available. Using defaults.
[ 5.448] (**) |-->Screen "Default Screen Section" (0)
[ 5.448] (**) | |-->Monitor "<default monitor>"
[ 5.449] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.449] (==) Automatically adding devices
[ 5.449] (==) Automatically enabling devices
[ 5.449] (==) Automatically adding GPU devices
[ 5.449] (==) Automatically binding GPU devices
[ 5.449] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.450] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 5.450] Entry deleted from font path.
[ 5.450] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 5.451] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 5.451] Entry deleted from font path.
[ 5.451] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5.451] Entry deleted from font path.
[ 5.452] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 5.452] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.452] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.452] (II) Module ABI versions:
[ 5.452] X.Org ANSI C Emulation: 0.4
[ 5.452] X.Org Video Driver: 24.0
[ 5.452] X.Org XInput driver : 24.1
[ 5.452] X.Org Server Extension : 10.0
[ 5.452] (++) using VT number 1
[ 5.452] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5.453] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 5.462] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.465] (--) PCI:*(0@0:2:0) 8086:1916:103c:8136 rev 7, Mem @ 0xa0000000/16777216, 0x90000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 5.465] (--) PCI: (1@0:0:0) 1002:6660:103c:8136 rev 131, Mem @ 0x80000000/268435456, 0xa1300000/262144, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[ 5.465] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5.465] (II) LoadModule: "glx"
[ 5.466] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.474] (II) Module glx: vendor="X.Org Foundation"
[ 5.474] compiled for 1.20.6, module version = 1.0.0
[ 5.474] ABI class: X.Org Server Extension, version 10.0
[ 5.474] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[ 5.474] loading driver: radeon
[ 5.474] (==) Matched intel as autoconfigured driver 0
[ 5.474] (==) Matched radeon as autoconfigured driver 1
[ 5.474] (==) Matched ati as autoconfigured driver 2
[ 5.474] (==) Matched modesetting as autoconfigured driver 3
[ 5.474] (==) Matched fbdev as autoconfigured driver 4
[ 5.474] (==) Matched vesa as autoconfigured driver 5
[ 5.474] (==) Assigned the driver to the xf86ConfigLayout
[ 5.474] (II) LoadModule: "intel"
[ 5.474] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 5.476] (II) Module intel: vendor="X.Org Foundation"
[ 5.476] compiled for 1.20.6, module version = 2.99.917
[ 5.476] Module class: X.Org Video Driver
[ 5.476] ABI class: X.Org Video Driver, version 24.0
[ 5.476] (II) LoadModule: "radeon"
[ 5.477] (WW) Warning, couldn't open module radeon
[ 5.477] (EE) Failed to load module "radeon" (module does not exist, 0)
[ 5.477] (II) LoadModule: "ati"
[ 5.477] (WW) Warning, couldn't open module ati
[ 5.477] (EE) Failed to load module "ati" (module does not exist, 0)
[ 5.477] (II) LoadModule: "modesetting"
[ 5.477] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.479] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.479] compiled for 1.20.6, module version = 1.20.6
[ 5.479] Module class: X.Org Video Driver
[ 5.479] ABI class: X.Org Video Driver, version 24.0
[ 5.479] (II) LoadModule: "fbdev"
[ 5.479] (WW) Warning, couldn't open module fbdev
[ 5.479] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.479] (II) LoadModule: "vesa"
[ 5.479] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5.480] (II) Module vesa: vendor="X.Org Foundation"
[ 5.480] compiled for 1.20.0, module version = 2.4.0
[ 5.480] Module class: X.Org Video Driver
[ 5.480] ABI class: X.Org Video Driver, version 24.0
[ 5.480] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 5.480] (II) intel: Driver for Intel(R) HD Graphics
[ 5.480] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 5.480] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 5.480] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.480] (II) VESA: driver for VESA chipsets: vesa
[ 5.481] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20190822
[ 5.481] (II) intel(0): SNA compiled from 2.99.917-899-gf66d3954
[ 5.482] (WW) Falling back to old probe method for modesetting
[ 5.482] (II) modeset(G0): using drv /dev/dri/card0
[ 5.482] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 520
[ 5.482] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 5.482] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.482] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 5.483] (==) intel(0): RGB weight 888
[ 5.483] (==) intel(0): Default visual is TrueColor
[ 5.484] (II) intel(0): Output eDP1 has no monitor section
[ 5.484] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 5.484] (II) intel(0): Enabled output eDP1
[ 5.484] (II) intel(0): Output HDMI1 has no monitor section
[ 5.484] (II) intel(0): Enabled output HDMI1
[ 5.484] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 5.484] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 5.484] (II) intel(0): Enabled output VIRTUAL1
[ 5.484] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 5.485] (==) intel(0): TearFree enabled
[ 5.485] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.485] (==) intel(0): DPI set to (96, 96)
[ 5.485] (II) Loading sub module "dri3"
[ 5.485] (II) LoadModule: "dri3"
[ 5.485] (II) Module "dri3" already built-in
[ 5.485] (II) Loading sub module "dri2"
[ 5.485] (II) LoadModule: "dri2"
[ 5.485] (II) Module "dri2" already built-in
[ 5.485] (II) Loading sub module "present"
[ 5.485] (II) LoadModule: "present"
[ 5.485] (II) Module "present" already built-in
[ 5.485] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 5.485] (==) modeset(G0): RGB weight 888
[ 5.485] (==) modeset(G0): Default visual is TrueColor
[ 5.485] (II) Loading sub module "glamoregl"
[ 5.485] (II) LoadModule: "glamoregl"
[ 5.485] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.491] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.491] compiled for 1.20.6, module version = 1.0.1
[ 5.491] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.712] (II) modeset(G0): glamor X acceleration enabled on AMD HAINAN (DRM 2.50.0, 5.4.8-arch1-1, LLVM 9.0.0)
[ 5.712] (II) modeset(G0): glamor initialized
[ 5.712] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.712] (==) modeset(G0): DPI set to (96, 96)
[ 5.712] (II) Loading sub module "fb"
[ 5.712] (II) LoadModule: "fb"
[ 5.712] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.713] (II) Module fb: vendor="X.Org Foundation"
[ 5.713] compiled for 1.20.6, module version = 1.0.0
[ 5.713] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.713] (II) UnloadModule: "vesa"
[ 5.713] (II) Unloading vesa
[ 5.715] (II) intel(0): SNA initialized with Skylake (gen9) backend
[ 5.715] (==) intel(0): Backing store enabled
[ 5.715] (==) intel(0): Silken mouse disabled
[ 5.715] (II) intel(0): HW Cursor enabled
[ 5.716] (==) intel(0): DPMS enabled
[ 5.716] (==) intel(0): Display hotplug detection enabled
[ 5.716] (II) intel(0): [DRI2] Setup complete
[ 5.716] (II) intel(0): [DRI2] DRI driver: i965
[ 5.716] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 5.716] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 5.716] (II) intel(0): hardware support for Present enabled
[ 5.731] (==) modeset(G0): Backing store enabled
[ 5.731] (==) modeset(G0): Silken mouse disabled
[ 5.731] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 5.731] (==) modeset(G0): DPMS enabled
[ 5.732] (II) modeset(G0): [DRI2] Setup complete
[ 5.732] (II) modeset(G0): [DRI2] DRI driver: radeonsi
[ 5.732] (II) modeset(G0): [DRI2] VDPAU driver: radeonsi
[ 5.732] (II) Initializing extension Generic Event Extension
[ 5.732] (II) Initializing extension SHAPE
[ 5.732] (II) Initializing extension MIT-SHM
[ 5.732] (II) Initializing extension XInputExtension
[ 5.733] (II) Initializing extension XTEST
[ 5.733] (II) Initializing extension BIG-REQUESTS
[ 5.733] (II) Initializing extension SYNC
[ 5.733] (II) Initializing extension XKEYBOARD
[ 5.733] (II) Initializing extension XC-MISC
[ 5.733] (II) Initializing extension SECURITY
[ 5.733] (II) Initializing extension XFIXES
[ 5.733] (II) Initializing extension RENDER
[ 5.734] (II) Initializing extension RANDR
[ 5.734] (II) Initializing extension COMPOSITE
[ 5.734] (II) Initializing extension DAMAGE
[ 5.734] (II) Initializing extension MIT-SCREEN-SAVER
[ 5.734] (II) Initializing extension DOUBLE-BUFFER
[ 5.734] (II) Initializing extension RECORD
[ 5.734] (II) Initializing extension DPMS
[ 5.734] (II) Initializing extension Present
[ 5.735] (II) Initializing extension DRI3
[ 5.735] (II) Initializing extension X-Resource
[ 5.735] (II) Initializing extension XVideo
[ 5.735] (II) Initializing extension XVideo-MotionCompensation
[ 5.735] (II) Initializing extension GLX
[ 5.757] (II) AIGLX: Loaded and initialized i965
[ 5.757] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.757] (II) Initializing extension XFree86-VidModeExtension
[ 5.757] (II) Initializing extension XFree86-DGA
[ 5.757] (II) Initializing extension XFree86-DRI
[ 5.757] (II) Initializing extension DRI2
[ 5.759] (II) modeset(G0): Damage tracking initialized
[ 5.762] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 5.777] (II) intel(0): Setting screen physical size to 508 x 285
[ 5.855] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.855] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.855] (II) LoadModule: "libinput"
[ 5.855] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5.858] (II) Module libinput: vendor="X.Org Foundation"
[ 5.858] compiled for 1.20.5, module version = 0.29.0
[ 5.858] Module class: X.Org XInput Driver
[ 5.858] ABI class: X.Org XInput driver, version 24.1
[ 5.858] (II) Using input driver 'libinput' for 'Power Button'
[ 5.858] (**) Power Button: always reports core events
[ 5.858] (**) Option "Device" "/dev/input/event1"
[ 5.858] (**) Option "_source" "server/udev"
[ 5.864] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.864] (II) event1 - Power Button: device is a keyboard
[ 5.864] (II) event1 - Power Button: device removed
[ 5.895] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5.895] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.896] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.896] (II) event1 - Power Button: device is a keyboard
[ 5.896] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 5.896] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.896] (II) Using input driver 'libinput' for 'Video Bus'
[ 5.896] (**) Video Bus: always reports core events
[ 5.896] (**) Option "Device" "/dev/input/event8"
[ 5.896] (**) Option "_source" "server/udev"
[ 5.897] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 5.897] (II) event8 - Video Bus: device is a keyboard
[ 5.897] (II) event8 - Video Bus: device removed
[ 5.961] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19/event8"
[ 5.961] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5.962] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 5.962] (II) event8 - Video Bus: device is a keyboard
[ 5.963] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 5.963] (II) No input driver specified, ignoring this device.
[ 5.963] (II) This device may have been added with another device file.
[ 5.964] (II) config/udev: Adding input device Logitech M280/320/275 (/dev/input/event3)
[ 5.964] (**) Logitech M280/320/275: Applying InputClass "libinput pointer catchall"
[ 5.964] (**) Logitech M280/320/275: Applying InputClass "libinput keyboard catchall"
[ 5.964] (II) Using input driver 'libinput' for 'Logitech M280/320/275'
[ 5.964] (**) Logitech M280/320/275: always reports core events
[ 5.964] (**) Option "Device" "/dev/input/event3"
[ 5.964] (**) Option "_source" "server/udev"
[ 5.965] (II) event3 - Logitech M280/320/275: is tagged by udev as: Keyboard Mouse
[ 5.966] (II) event3 - Logitech M280/320/275: device is a pointer
[ 5.966] (II) event3 - Logitech M280/320/275: device is a keyboard
[ 5.966] (II) event3 - Logitech M280/320/275: device removed
[ 5.998] (II) libinput: Logitech M280/320/275: needs a virtual subdevice
[ 5.998] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/0003:046D:4057.0003/input/input13/event3"
[ 5.998] (II) XINPUT: Adding extended input device "Logitech M280/320/275" (type: MOUSE, id 8)
[ 5.998] (**) Option "AccelerationScheme" "none"
[ 5.998] (**) Logitech M280/320/275: (accel) selected scheme none/0
[ 5.998] (**) Logitech M280/320/275: (accel) acceleration factor: 2.000
[ 5.998] (**) Logitech M280/320/275: (accel) acceleration threshold: 4
[ 6.000] (II) event3 - Logitech M280/320/275: is tagged by udev as: Keyboard Mouse
[ 6.000] (II) event3 - Logitech M280/320/275: device is a pointer
[ 6.000] (II) event3 - Logitech M280/320/275: device is a keyboard
[ 6.001] (II) config/udev: Adding input device Logitech M280/320/275 (/dev/input/mouse0)
[ 6.001] (II) No input driver specified, ignoring this device.
[ 6.001] (II) This device may have been added with another device file.
[ 6.002] (II) config/udev: Adding input device HP Truevision HD: HP Truevision (/dev/input/event6)
[ 6.002] (**) HP Truevision HD: HP Truevision: Applying InputClass "libinput keyboard catchall"
[ 6.002] (II) Using input driver 'libinput' for 'HP Truevision HD: HP Truevision'
[ 6.002] (**) HP Truevision HD: HP Truevision: always reports core events
[ 6.002] (**) Option "Device" "/dev/input/event6"
[ 6.002] (**) Option "_source" "server/udev"
[ 6.003] (II) event6 - HP Truevision HD: HP Truevision: is tagged by udev as: Keyboard
[ 6.003] (II) event6 - HP Truevision HD: HP Truevision: device is a keyboard
[ 6.003] (II) event6 - HP Truevision HD: HP Truevision: device removed
[ 6.054] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18/event6"
[ 6.054] (II) XINPUT: Adding extended input device "HP Truevision HD: HP Truevision" (type: KEYBOARD, id 9)
[ 6.058] (II) event6 - HP Truevision HD: HP Truevision: is tagged by udev as: Keyboard
[ 6.058] (II) event6 - HP Truevision HD: HP Truevision: device is a keyboard
[ 6.060] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 6.060] (II) No input driver specified, ignoring this device.
[ 6.060] (II) This device may have been added with another device file.
[ 6.061] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 6.061] (II) No input driver specified, ignoring this device.
[ 6.061] (II) This device may have been added with another device file.
[ 6.062] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 6.062] (II) No input driver specified, ignoring this device.
[ 6.062] (II) This device may have been added with another device file.
[ 6.063] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[ 6.063] (II) No input driver specified, ignoring this device.
[ 6.063] (II) This device may have been added with another device file.
[ 6.064] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[ 6.064] (II) No input driver specified, ignoring this device.
[ 6.064] (II) This device may have been added with another device file.
[ 6.065] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[ 6.065] (II) No input driver specified, ignoring this device.
[ 6.065] (II) This device may have been added with another device file.
[ 6.065] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event16)
[ 6.066] (II) No input driver specified, ignoring this device.
[ 6.066] (II) This device may have been added with another device file.
[ 6.066] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event17)
[ 6.066] (II) No input driver specified, ignoring this device.
[ 6.066] (II) This device may have been added with another device file.
[ 6.068] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 6.068] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 6.068] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 6.068] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.068] (**) Option "Device" "/dev/input/event2"
[ 6.068] (**) Option "_source" "server/udev"
[ 6.071] (II) event2 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 6.071] (II) event2 - AT Translated Set 2 keyboard: device is a keyboard
[ 6.072] (II) event2 - AT Translated Set 2 keyboard: device removed
[ 6.101] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 6.101] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 6.104] (II) event2 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 6.105] (II) event2 - AT Translated Set 2 keyboard: device is a keyboard
[ 6.107] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 6.107] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 6.107] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 6.107] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 6.107] (**) Option "Device" "/dev/input/event7"
[ 6.107] (**) Option "_source" "server/udev"
[ 6.109] (II) event7 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 6.111] (II) event7 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 6.111] (II) event7 - SynPS/2 Synaptics TouchPad: device removed
[ 6.174] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event7"
[ 6.174] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 6.175] (**) Option "AccelerationScheme" "none"
[ 6.175] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 6.175] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 6.175] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 6.176] (II) event7 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 6.177] (II) event7 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 6.177] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 6.177] (II) No input driver specified, ignoring this device.
[ 6.177] (II) This device may have been added with another device file.
[ 6.178] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 6.178] (II) No input driver specified, ignoring this device.
[ 6.178] (II) This device may have been added with another device file.
[ 6.178] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4)
[ 6.178] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[ 6.178] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[ 6.178] (**) HP Wireless hotkeys: always reports core events
[ 6.178] (**) Option "Device" "/dev/input/event4"
[ 6.178] (**) Option "_source" "server/udev"
[ 6.179] (II) event4 - HP Wireless hotkeys: is tagged by udev as: Keyboard
[ 6.179] (II) event4 - HP Wireless hotkeys: device is a keyboard
[ 6.179] (II) event4 - HP Wireless hotkeys: device removed
[ 6.241] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event4"
[ 6.241] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 12)
[ 6.242] (II) event4 - HP Wireless hotkeys: is tagged by udev as: Keyboard
[ 6.242] (II) event4 - HP Wireless hotkeys: device is a keyboard
[ 6.242] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 6.242] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 6.242] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 6.242] (**) HP WMI hotkeys: always reports core events
[ 6.242] (**) Option "Device" "/dev/input/event9"
[ 6.242] (**) Option "_source" "server/udev"
[ 6.243] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 6.243] (II) event9 - HP WMI hotkeys: device is a keyboard
[ 6.243] (II) event9 - HP WMI hotkeys: device is a switch device
[ 6.243] (II) event9 - HP WMI hotkeys: device removed
[ 6.271] (**) Option "config_info" "udev:/sys/devices/virtual/input/input17/event9"
[ 6.271] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[ 6.272] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 6.272] (II) event9 - HP WMI hotkeys: device is a keyboard
[ 6.272] (II) event9 - HP WMI hotkeys: device is a switch device
[ 6.293] (**) Logitech M280/320/275: Applying InputClass "libinput pointer catchall"
[ 6.293] (**) Logitech M280/320/275: Applying InputClass "libinput keyboard catchall"
[ 6.293] (II) Using input driver 'libinput' for 'Logitech M280/320/275'
[ 6.293] (**) Logitech M280/320/275: always reports core events
[ 6.293] (**) Option "Device" "/dev/input/event3"
[ 6.293] (**) Option "_source" "_driver/libinput"
[ 6.293] (II) libinput: Logitech M280/320/275: is a virtual subdevice
[ 6.293] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/0003:046D:4057.0003/input/input13/event3"
[ 6.293] (II) XINPUT: Adding extended input device "Logitech M280/320/275" (type: KEYBOARD, id 14)
[ 6.298] (EE) Failed to open authorization file "/var/run/sddm/{d4643821-8aa1-49d2-bdd7-bf81906d3991}": No such file or directory
[ 7.718] (II) intel(0): EDID vendor "AUO", prod id 14573
[ 7.718] (II) intel(0): Printing DDC gathered Modelines:
[ 7.718] (II) intel(0): Modeline "1920x1080"x0.0 141.00 1920 2028 2076 2100 1080 1090 1100 1118 -hsync -vsync (67.1 kHz eP)
[ 7.718] (II) intel(0): Modeline "1920x1080"x0.0 94.00 1920 2028 2076 2100 1080 1090 1100 1118 -hsync -vsync (44.8 kHz e)Offline
#2 2020-01-08 07:31:09
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,141
Re: Xorg is using AMD GPU instead of Intel iGPU for Xorg
Xorg is running on the intel chip, see https://wiki.archlinux.org/index.php/PRIME
How did you determine the core of your battery issues?
Offline