Arch Linux

martvefun

Member

From: The Internets

Registered: 2009-12-19

Posts: 179

Poor quality sound with bluetooth headset

Hello,

I have a Lindy BNX-60 bluetooth headphone.
I usually use it with my phone and it works great.
However, if I connect it via bluetooth to my laptop running arch, the sounds is terrible. It is not as clear, a bit muffled. I have to put the volume higher but the voices are not as understandable when I am connected to my phone or when I use a jack.

Any idea ? Does it depends of bluetooth driver or something ?

$ yaourt -Qs blue
extra/bluez 5.45-1
    Daemons for the bluetooth protocol stack
extra/bluez-firmware 1.2-8
    Firmwares for Broadcom BCM203x and STLC2300 Bluetooth chips
extra/bluez-libs 5.45-1
    Deprecated libraries for the bluetooth protocol stack
extra/bluez-utils 5.45-1
    Development and debugging utilities for the bluetooth protocol stack
extra/gnome-bluetooth 3.20.1+1+ge902d1a-1
    The GNOME Bluetooth Subsystem
extra/pulseaudio-bluetooth 10.0-3
    Bluetooth support for PulseAudio
extra/sbc 1.3-1
    Bluetooth Subband Codec (SBC) library

Thanks

---

English is not my native language, sorry for the mistakes
Arch amd64, GNOME, Thinkpad

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 23,196

Re: Poor quality sound with bluetooth headset

Are you using the A2DP profile? What are the outputs of

pacmd list-cards
pacmd list-sinks

aptX which is apparently the most modern Bluetooth protocol, is proprietary and doesn't have a free implementation available afaik.

martvefun

Member

From: The Internets

Registered: 2009-12-19

Posts: 179

Re: Poor quality sound with bluetooth headset

It seems indeed that it uses aptX :-/
pacmd list-cards

2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1f.3>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf1324000 irq 130"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d70"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5460, available: unknown)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: no)
		output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5260, available: unknown)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: no)
		output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 160, available: unknown)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 100, available: no)
		output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 160, available: unknown)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: no)
		output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5260, available: unknown)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: no)
		output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 160, available: unknown)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: no)
		output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 160, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1f.3.analog-stereo/#13: Built-in Audio Analog Stereo
	sources:
		alsa_input.pci-0000_00_1f.3.analog-stereo/#1: Built-in Audio Analog Stereo
		alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#15: Monitor of Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "S23B550"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 2
	name: <bluez_card.20_15_11_18_02_AF>
	driver: <module-bluez5-device.c>
	owner module: 31
	properties:
		device.description = "BNX-60"
		device.string = "20:15:11:18:02:AF"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		bluez.path = "/org/bluez/hci0/dev_20_15_11_18_02_AF"
		bluez.class = "0x240404"
		bluez.alias = "BNX-60"
		device.icon_name = "audio-headset-bluetooth"
		device.intended_roles = "phone"
	profiles:
		headset_head_unit: Headset Head Unit (HSP/HFP) (priority 20, available: no)
		a2dp_sink: High Fidelity Playback (A2DP Sink) (priority 10, available: unknown)
		off: Off (priority 0, available: yes)
	active profile: <a2dp_sink>
	sinks:
		bluez_sink.20_15_11_18_02_AF.a2dp_sink/#14: BNX-60
	sources:
		bluez_sink.20_15_11_18_02_AF.a2dp_sink.monitor/#16: Monitor of BNX-60
	ports:
		headset-output: Headset (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
		headset-input: Headset (priority 0, latency offset 0 usec, available: no)
			properties:
				

pacmd list-sinks

2 sink(s) available.
  * index: 13
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9959
	volume: front-left: 37421 /  57% / -14.60 dB,   front-right: 37421 /  57% / -14.60 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 15
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "CX20724 Analog"
		alsa.id = "CX20724 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf1324000 irq 130"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d70"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "384000"
		device.buffering.fragment_size = "192000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Conexant CX20724"
		alsa.components = "HDA:14f150f4,103c80ff,00100109 HDA:80862809,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-headphones>
    index: 14
	name: <bluez_sink.20_15_11_18_02_AF.a2dp_sink>
	driver: <module-bluez5-device.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY 
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 3 KiB
	max rewind: 0 KiB
	monitor source: 16
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	fixed latency: 45.32 ms
	card: 2 <bluez_card.20_15_11_18_02_AF>
	module: 31
	properties:
		bluetooth.protocol = "a2dp_sink"
		device.description = "BNX-60"
		device.string = "20:15:11:18:02:AF"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		bluez.path = "/org/bluez/hci0/dev_20_15_11_18_02_AF"
		bluez.class = "0x240404"
		bluez.alias = "BNX-60"
		device.icon_name = "audio-headset-bluetooth"
		device.intended_roles = "phone"
	ports:
		headset-output: Headset (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <headset-output>

How can I check for A2DP?

Last edited by martvefun (2017-05-18 15:39:57)

---

English is not my native language, sorry for the mistakes
Arch amd64, GNOME, Thinkpad

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 23,196

Re: Poor quality sound with bluetooth headset

That's what I wanted to find out, but apparently you didn't have the bluethooth headset connected when executing these commands, or did you?

martvefun

Member

From: The Internets

Registered: 2009-12-19

Posts: 179

Re: Poor quality sound with bluetooth headset

oh my bad, it dropped indeed (getting issues to connect it from time to time).
I have updated the previous post

---

English is not my native language, sorry for the mistakes
Arch amd64, GNOME, Thinkpad

gschanuel

Member

Registered: 2017-05-18

Posts: 1

Re: Poor quality sound with bluetooth headset

try

pacmd set-card-profile 2 a2dp_sink

Also, looks like you use Gnome and probably GDM, take a look here:
https://wiki.archlinux.org/index.php/Bl … e_with_GDM

martvefun

Member

From: The Internets

Registered: 2009-12-19

Posts: 179

Re: Poor quality sound with bluetooth headset

Great, sounds better indeed.
Yes I use GDM, I will try your link to see if it is enabled at startup

---

English is not my native language, sorry for the mistakes
Arch amd64, GNOME, Thinkpad

develmusa

Member

Registered: 2017-06-27

Posts: 1

Re: Poor quality sound with bluetooth headset

try

pacmd set-card-profile 2 a2dp_sink

Also, looks like you use Gnome and probably GDM, take a look here:
https://wiki.archlinux.org/index.php/Bl … e_with_GDM

Thank you. You solved my problem.

Get the index of your card:

pacmd list-cards

Set the cards profile to a2dp (example: index 2):

pacmd set-card-profile 2 a2dp_sink

Last edited by develmusa (2017-06-27 07:00:13)

TheTorstein

Guest

Re: Poor quality sound with bluetooth headset

try

pacmd set-card-profile 2 a2dp_sink

Also, looks like you use Gnome and probably GDM, take a look here:
https://wiki.archlinux.org/index.php/Bl … e_with_GDM

Hello,

I have similar problem with my bluetooth speaker. When it is connected via cable sound is good, but on bluetooth it is awefull.
I'm on Manjaro 19.0.2, GNOME 3.34.4. I tried this (pacmd set-card-profile 1 headset_head_unit) but it did not work and followed guide from wiki for GNOME, but it did not help.

pacmd list-cards

2 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_00_1f.3>
    driver: <module-alsa-card.c>
    owner module: 6
    properties:
        alsa.card = "0"
        alsa.card_name = "HDA Intel PCH"
        alsa.long_card_name = "HDA Intel PCH at 0xa1518000 irq 151"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1f.3"
        sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.id = "9dc8"
        device.product.name = "Cannon Point-LP High Definition Audio Controller"
        device.form_factor = "internal"
        device.string = "0"
        device.description = "Built-in Audio"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    profiles:
        input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
        output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
        output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
        output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
        output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: no)
        output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
        output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
        output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
        output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
        output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
        output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5765, available: no)
        output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
        output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no)
        output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
        output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no)
        output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
        output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: no)
        output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
        output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no)
        output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
        output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no)
        output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
        output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (priority 5765, available: no)
        output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
        output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no)
        output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
        output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no)
        output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
        output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) Output + Analog Stereo Input (priority 5765, available: no)
        output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
        output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no)
        output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
        output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no)
        off: Off (priority 0, available: unknown)
    active profile: <output:analog-stereo+input:analog-stereo>
    sinks:
        alsa_output.pci-0000_00_1f.3.analog-stereo/#0: Built-in Audio Analog Stereo
    sources:
        alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
        alsa_input.pci-0000_00_1f.3.analog-stereo/#1: Built-in Audio Analog Stereo
    ports:
        analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
            properties:
                device.icon_name = "audio-speakers"
        analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-headphones"
        hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
    index: 1
    name: <bluez_card.F0_13_C3_3F_14_2D>
    driver: <module-bluez5-device.c>
    owner module: 27
    properties:
        device.description = "Jam Plus"
        device.string = "F0:13:C3:3F:14:2D"
        device.api = "bluez"
        device.class = "sound"
        device.bus = "bluetooth"
        device.form_factor = "headset"
        bluez.path = "/org/bluez/hci0/dev_F0_13_C3_3F_14_2D"
        bluez.class = "0x240404"
        bluez.alias = "Jam Plus"
        device.icon_name = "audio-headset-bluetooth"
        device.intended_roles = "phone"
    profiles:
        headset_head_unit: Headset Head Unit (HSP/HFP) (priority 30, available: yes)
        a2dp_sink: High Fidelity Playback (A2DP Sink) (priority 40, available: no)
        off: Off (priority 0, available: yes)
    active profile: <headset_head_unit>
    sinks:
        bluez_sink.F0_13_C3_3F_14_2D.headset_head_unit/#1: Jam Plus
    sources:
        bluez_sink.F0_13_C3_3F_14_2D.headset_head_unit.monitor/#2: Monitor of Jam Plus
        bluez_source.F0_13_C3_3F_14_2D.headset_head_unit/#3: Jam Plus
    ports:
        headset-output: Headset (priority 0, latency offset 0 usec, available: yes)
            properties:
               
        headset-input: Headset (priority 0, latency offset 0 usec, available: yes)
            properties:

pacmd list-sinks

2 sink(s) available.
    index: 0
    name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9039
    volume: front-left: 49881 /  76% / -7,11 dB,   front-right: 49881 /  76% / -7,11 dB
            balance 0,00
    base volume: 65536 / 100% / 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 0
    sample spec: s16le 2ch 48000Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
    card: 0 <alsa_card.pci-0000_00_1f.3>
    module: 6
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "CX8070 Analog"
        alsa.id = "CX8070 Analog"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "0"
        alsa.card_name = "HDA Intel PCH"
        alsa.long_card_name = "HDA Intel PCH at 0xa1518000 irq 151"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1f.3"
        sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.id = "9dc8"
        device.product.name = "Cannon Point-LP High Definition Audio Controller"
        device.form_factor = "internal"
        device.string = "front:0"
        device.buffering.buffer_size = "384000"
        device.buffering.fragment_size = "192000"
        device.access_mode = "mmap+timer"
        device.profile.name = "analog-stereo"
        device.profile.description = "Analog Stereo"
        device.description = "Built-in Audio Analog Stereo"
        alsa.mixer_name = "Conexant CX8070"
        alsa.components = "HDA:14f11f86,17aa5072,00100100 HDA:8086280b,80860101,00100000"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    ports:
        analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
            properties:
                device.icon_name = "audio-speakers"
        analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-headphones"
    active port: <analog-output-speaker>
  * index: 1
    name: <bluez_sink.F0_13_C3_3F_14_2D.headset_head_unit>
    driver: <module-bluez5-device.c>
    flags: HARDWARE HW_VOLUME_CTRL LATENCY
    state: RUNNING
    suspend cause: (none)
    priority: 9050
    volume: mono: 65536 / 100%
            balance 0,00
    base volume: 65536 / 100%
    volume steps: 16
    muted: no
    current latency: 28,68 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 2
    sample spec: s16le 1ch 8000Hz
    channel map: mono
                 Mono
    used by: 1
    linked by: 1
    fixed latency: 28,00 ms
    card: 1 <bluez_card.F0_13_C3_3F_14_2D>
    module: 27
    properties:
        bluetooth.protocol = "headset_head_unit"
        device.intended_roles = "phone"
        device.description = "Jam Plus"
        device.string = "F0:13:C3:3F:14:2D"
        device.api = "bluez"
        device.class = "sound"
        device.bus = "bluetooth"
        device.form_factor = "headset"
        bluez.path = "/org/bluez/hci0/dev_F0_13_C3_3F_14_2D"
        bluez.class = "0x240404"
        bluez.alias = "Jam Plus"
        device.icon_name = "audio-headset-bluetooth"
    ports:
        headset-output: Headset (priority 0, latency offset 0 usec, available: yes)
            properties:
               
    active port: <headset-output>

I couldn't find any solution, can you help?

Thanks

WorMzy

Administrator

From: Scotland

Registered: 2010-06-16

Posts: 12,401

Website

Re: Poor quality sound with bluetooth headset

Manjaro isn't Arch. Please seek support from the Manjaro support community.

https://bbs.archlinux.org/misc.php?action=rules

Closing.

---

Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.