Lenovo ThinkBook 15 TouchPad not detected

vilee · 2019-12-14 10:34:48

Today I installed Arch Linux on a Lenovo ThinkBook 15. Setup pretty minimalistic - KDE Plasma, mesa drivers, SDDM. However, after the first boot into the GUI, I noticed that the TouchPad is unresponsive. It doesn't seem to get detected at any point on the system, and it doesn't show up on lsusb or xorg log neither. I am using libinput but I have the xf86-video-synaptics package installed as well. What is the possible troubleshooting for this issue?

Output of `libinput-list-devices`:
https://pastebin.com/HGPGkiFf

Output of `lsusb`:
https://pastebin.com/KqsiRtj6

Output of `dmesg`:
https://pastebin.com/Fs7VsQ11

Last edited by vilee (2019-12-14 11:06:14)

Awebb · 2019-12-14 10:52:24

Did a quick google and found this:

https://www.google.com/url?sa=t&source= … -4wPBoMUnY

loqs · 2019-12-14 10:56:32

Please post the output of dmesg.

vilee · 2019-12-14 11:10:31

loqs wrote:

Please post the output of dmesg.

Appended output of dmesg to the original post.

rnp · 2020-04-09 13:08:51

I have the same problem on the same laptop (I suppose): Lenovo ThinkBook 15-IML 20RW
The dmesg output:

[    0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03
[    0.000000] Linux version 5.6.3-arch1-1 (linux@archlinux) (gcc version 9.3.0 (Arch Linux 9.3.0-1)) #1 SMP PREEMPT Wed, 08 Apr 2020 07:47:16 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=54c0bd40-45bb-4478-b0dd-2039573067d4 rw loglevel=3 quiet sysrq_always_enabled=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e4d0fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007e4d1000-0x000000007e5fcfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007e5fd000-0x000000008ef9cfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008ef9d000-0x000000008fb54fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008fb55000-0x000000008fc4efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008fc4f000-0x000000008fc4ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008fc50000-0x000000009b7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004627fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by Phoenix Technologies Ltd.
[    0.000000] efi:  SMBIOS=0x8053a000  SMBIOS 3.0=0x8052d000  ACPI=0x8fc4e000  ACPI 2.0=0x8fc4e014  ESRT=0x7edaf000
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: LENOVO 20RW/LVA/LVAB, BIOS CJCN22WW 10/23/2019
[    0.000000] tsc: Detected 2100.000 MHz processor
[    0.000021] tsc: Detected 2099.944 MHz TSC
[    0.000021] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000024] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000032] last_pfn = 0x462800 max_arch_pfn = 0x400000000
[    0.000038] MTRR default type: write-back
[    0.000040] MTRR fixed ranges enabled:
[    0.000042]   00000-9FFFF write-back
[    0.000043]   A0000-BFFFF uncachable
[    0.000045]   C0000-FFFFF write-protect
[    0.000047] MTRR variable ranges enabled:
[    0.000049]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000051]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000053]   2 base 009C000000 mask 7FFC000000 uncachable
[    0.000054]   3 base 009A000000 mask 7FFE000000 uncachable
[    0.000056]   4 base 0099000000 mask 7FFF000000 uncachable
[    0.000058]   5 base 2000000000 mask 6000000000 uncachable
[    0.000059]   6 base 1000000000 mask 7000000000 uncachable
[    0.000061]   7 base 0800000000 mask 7800000000 uncachable
[    0.000062]   8 base 4000000000 mask 4000000000 uncachable
[    0.000064]   9 disabled
[    0.000772] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.001139] last_pfn = 0x8fc50 max_arch_pfn = 0x400000000
[    0.015200] esrt: Reserving ESRT space from 0x000000007edaf000 to 0x000000007edaf038.
[    0.015216] check: Scanning 1 areas for low memory corruption
[    0.015224] Using GB pages for direct mapping
[    0.015227] BRK [0x2e5401000, 0x2e5401fff] PGTABLE
[    0.015230] BRK [0x2e5402000, 0x2e5402fff] PGTABLE
[    0.015232] BRK [0x2e5403000, 0x2e5403fff] PGTABLE
[    0.015268] BRK [0x2e5404000, 0x2e5404fff] PGTABLE
[    0.015270] BRK [0x2e5405000, 0x2e5405fff] PGTABLE
[    0.015436] BRK [0x2e5406000, 0x2e5406fff] PGTABLE
[    0.015481] BRK [0x2e5407000, 0x2e5407fff] PGTABLE
[    0.015521] BRK [0x2e5408000, 0x2e5408fff] PGTABLE
[    0.015522] BRK [0x2e5409000, 0x2e5409fff] PGTABLE
[    0.015608] Secure boot could not be determined
[    0.015609] RAMDISK: [mem 0x36169000-0x370abfff]
[    0.015625] ACPI: Early table checksum verification disabled
[    0.015629] ACPI: RSDP 0x000000008FC4E014 000024 (v02 LENOVO)
[    0.015634] ACPI: XSDT 0x000000008FC4C188 0000EC (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015643] ACPI: FACP 0x00000000803ED000 000114 (v06 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015651] ACPI: DSDT 0x00000000803A7000 04220F (v02 LENOVO CFL      20170001 INTL 20160422)
[    0.015656] ACPI: FACS 0x000000008F9CC000 000040
[    0.015660] ACPI: SSDT 0x000000008043E000 001B4A (v02 LENOVO CpuSsdt  00003000 INTL 20160527)
[    0.015665] ACPI: SSDT 0x00000000803F4000 004622 (v02 LENOVO DptfTabl 00001000 INTL 20160527)
[    0.015669] ACPI: SSDT 0x00000000803EF000 003145 (v02 LENOVO SaSsdt   00003000 INTL 20160527)
[    0.015674] ACPI: SSDT 0x00000000803EE000 000530 (v02 LENOVO PerfTune 00001000 INTL 20160527)
[    0.015678] ACPI: HPET 0x00000000803EC000 000038 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015682] ACPI: APIC 0x00000000803EB000 000164 (v03 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015687] ACPI: MCFG 0x00000000803EA000 00003C (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015691] ACPI: SSDT 0x00000000803A5000 00147B (v02 LENOVO Ther_Rvp 00001000 INTL 20160527)
[    0.015696] ACPI: SSDT 0x00000000803A1000 00326F (v02 LENOVO xh_cmud4 00000000 INTL 20160527)
[    0.015700] ACPI: NHLT 0x00000000803A0000 00002D (v00 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015704] ACPI: BOOT 0x000000008039F000 000028 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.015709] ACPI: SSDT 0x000000008039B000 001516 (v02 LENOVO UsbCTabl 00001000 INTL 20160527)
[    0.015713] ACPI: LPIT 0x000000008039A000 000094 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015717] ACPI: WSMT 0x0000000080399000 000028 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015722] ACPI: SSDT 0x0000000080396000 002720 (v02 LENOVO PtidDevc 00001000 INTL 20160527)
[    0.015726] ACPI: SSDT 0x0000000080394000 00149F (v02 LENOVO TbtTypeC 00000000 INTL 20160527)
[    0.015730] ACPI: DBGP 0x0000000080393000 000034 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015735] ACPI: DBG2 0x0000000080392000 000054 (v00 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015739] ACPI: MSDM 0x0000000080391000 000055 (v03 LENOVO CB-01    00000000 PTEC 00000002)
[    0.015743] ACPI: BATB 0x00000000801B4000 00004A (v02 LENOVO CB-01    00000000 PTEC 00000002)
[    0.015748] ACPI: DMAR 0x000000007EDB1000 0000A8 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.015752] ACPI: BGRT 0x000000007EDAE000 000038 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015756] ACPI: UEFI 0x000000008F9BF000 00013E (v01 LENOVO CB-01    00000001 PTEC 00000002)
[    0.015761] ACPI: FPDT 0x000000007EDAD000 000044 (v01 LENOVO CB-01    20170001 PTEC 00000002)
[    0.015773] ACPI: Local APIC address 0xfee00000
[    0.016255] No NUMA configuration found
[    0.016256] Faking a node at [mem 0x0000000000000000-0x00000004627fffff]
[    0.016262] NODE_DATA(0) allocated [mem 0x4627fc000-0x4627fffff]
[    0.016321] Zone ranges:
[    0.016322]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.016324]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.016326]   Normal   [mem 0x0000000100000000-0x00000004627fffff]
[    0.016327]   Device   empty
[    0.016329] Movable zone start for each node
[    0.016329] Early memory node ranges
[    0.016331]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.016333]   node   0: [mem 0x0000000000100000-0x000000007e4d0fff]
[    0.016334]   node   0: [mem 0x000000008fc4f000-0x000000008fc4ffff]
[    0.016335]   node   0: [mem 0x0000000100000000-0x00000004627fffff]
[    0.017461] Zeroed struct page in unavailable ranges: 62352 pages
[    0.017463] Initmem setup node 0 [mem 0x0000000000001000-0x00000004627fffff]
[    0.017465] On node 0 totalpages: 4066416
[    0.017467]   DMA zone: 64 pages used for memmap
[    0.017468]   DMA zone: 22 pages reserved
[    0.017469]   DMA zone: 3998 pages, LIFO batch:0
[    0.017575]   DMA32 zone: 8020 pages used for memmap
[    0.017577]   DMA32 zone: 513234 pages, LIFO batch:63
[    0.032314]   Normal zone: 55456 pages used for memmap
[    0.032315]   Normal zone: 3549184 pages, LIFO batch:63
[    0.121381] Reserving Intel graphics memory at [mem 0x99800000-0x9b7fffff]
[    0.122193] ACPI: PM-Timer IO Port: 0x1808
[    0.122195] ACPI: Local APIC address 0xfee00000
[    0.122206] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.122207] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.122208] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.122209] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.122210] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.122211] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.122212] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.122213] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.122214] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.122215] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.122216] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.122217] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.122218] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.122219] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.122220] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.122221] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.122222] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.122223] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.122224] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.122225] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.122280] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.122283] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.122285] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.122287] ACPI: IRQ0 used by override.
[    0.122289] ACPI: IRQ9 used by override.
[    0.122292] Using ACPI (MADT) for SMP configuration information
[    0.122294] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.122302] e820: update [mem 0x79cd6000-0x79dc9fff] usable ==> reserved
[    0.122312] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.122331] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.122333] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.122335] PM: hibernation: Registered nosave memory: [mem 0x79cd6000-0x79dc9fff]
[    0.122337] PM: hibernation: Registered nosave memory: [mem 0x7e4d1000-0x7e5fcfff]
[    0.122338] PM: hibernation: Registered nosave memory: [mem 0x7e5fd000-0x8ef9cfff]
[    0.122339] PM: hibernation: Registered nosave memory: [mem 0x8ef9d000-0x8fb54fff]
[    0.122340] PM: hibernation: Registered nosave memory: [mem 0x8fb55000-0x8fc4efff]
[    0.122342] PM: hibernation: Registered nosave memory: [mem 0x8fc50000-0x9b7fffff]
[    0.122343] PM: hibernation: Registered nosave memory: [mem 0x9b800000-0xffffffff]
[    0.122346] [mem 0x9b800000-0xffffffff] available for PCI devices
[    0.122347] Booting paravirtualized kernel on bare hardware
[    0.122352] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.130042] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.130348] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
[    0.130358] pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
[    0.130359] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.130389] Built 1 zonelists, mobility grouping on.  Total pages: 4002854
[    0.130390] Policy zone: Normal
[    0.130392] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=54c0bd40-45bb-4478-b0dd-2039573067d4 rw loglevel=3 quiet sysrq_always_enabled=1
[    0.130510] sysrq: sysrq always enabled.
[    0.131919] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.132583] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.132720] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[    0.192433] Memory: 15788404K/16265664K available (12291K kernel code, 1463K rwdata, 4500K rodata, 1620K init, 3220K bss, 477260K reserved, 0K cma-reserved)
[    0.192652] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.192670] ftrace: allocating 40145 entries in 157 pages
[    0.218789] ftrace: allocated 157 pages with 5 groups
[    0.218959] rcu: Preemptible hierarchical RCU implementation.
[    0.218960] rcu:     RCU dyntick-idle grace-period acceleration is enabled.
[    0.218962] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.218963] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.218964]  Tasks RCU enabled.
[    0.218965] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.218966] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.223790] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.224350] random: get_random_bytes called from start_kernel+0x638/0x818 with crng_init=0
[    0.224387] Console: colour dummy device 80x25
[    0.224394] printk: console [tty0] enabled
[    0.224419] ACPI: Core revision 20200110
[    0.225233] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.225380] APIC: Switch to symmetric I/O mode setup
[    0.225383] DMAR: Host address width 39
[    0.225385] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.225393] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.225394] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.225400] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.225401] DMAR: RMRR base: 0x0000008ef57000 end: 0x0000008ef76fff
[    0.225403] DMAR: RMRR base: 0x00000099000000 end: 0x0000009b7fffff
[    0.225406] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.225407] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.225408] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.227742] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.227744] x2apic enabled
[    0.227774] Switched APIC routing to cluster x2apic.
[    0.233686] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.248792] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e44fb6c2ab, max_idle_ns: 440795206594 ns
[    0.248798] Calibrating delay loop (skipped), value calculated using timer frequency.. 4201.88 BogoMIPS (lpj=6999813)
[    0.248802] pid_max: default: 32768 minimum: 301
[    0.253472] LSM: Security Framework initializing
[    0.253478] Yama: becoming mindful.
[    0.253541] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.253578] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.253598] *** VALIDATE tmpfs ***
[    0.253825] *** VALIDATE proc ***
[    0.253896] *** VALIDATE cgroup ***
[    0.253898] *** VALIDATE cgroup2 ***
[    0.253981] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.254019] process: using mwait in idle threads
[    0.254023] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.254025] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.254029] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.254031] Spectre V2 : Mitigation: Enhanced IBRS
[    0.254032] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.254034] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.254036] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.254566] Freeing SMP alternatives memory: 32K
[    0.256185] TSC deadline timer enabled
[    0.256195] smpboot: CPU0: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xc)
[    0.275504] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.275513] ... version:                4
[    0.275514] ... bit width:              48
[    0.275515] ... generic registers:      4
[    0.275516] ... value mask:             0000ffffffffffff
[    0.275517] ... max period:             00007fffffffffff
[    0.275518] ... fixed-purpose events:   3
[    0.275519] ... event mask:             000000070000000f
[    0.282145] rcu: Hierarchical SRCU implementation.
[    0.305682] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.312169] smp: Bringing up secondary CPUs ...
[    0.352186] x86: Booting SMP configuration:
[    0.352188] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.593639] smp: Brought up 1 node, 8 CPUs
[    0.593639] smpboot: Max logical packages: 1
[    0.593639] smpboot: Total of 8 processors activated (33612.06 BogoMIPS)
[    0.596051] devtmpfs: initialized
[    0.596051] x86/mm: Memory block size: 128MB
[    0.598922] PM: Registering ACPI NVS region [mem 0x8ef9d000-0x8fb54fff] (12288000 bytes)
[    0.599135] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.599135] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.599135] pinctrl core: initialized pinctrl subsystem
[    0.599215] PM: RTC time: 12:40:07, date: 2020-04-09
[    0.599222] thermal_sys: Registered thermal governor 'fair_share'
[    0.599223] thermal_sys: Registered thermal governor 'bang_bang'
[    0.599224] thermal_sys: Registered thermal governor 'step_wise'
[    0.599225] thermal_sys: Registered thermal governor 'user_space'
[    0.599226] thermal_sys: Registered thermal governor 'power_allocator'
[    0.599413] NET: Registered protocol family 16
[    0.599566] audit: initializing netlink subsys (disabled)
[    0.599580] audit: type=2000 audit(1586436007.369:1): state=initialized audit_enabled=0 res=1
[    0.599580] cpuidle: using governor ladder
[    0.599580] cpuidle: using governor menu
[    0.599580] Simple Boot Flag at 0x47 set to 0x1
[    0.599580] ACPI: bus type PCI registered
[    0.599580] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.599580] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.599580] PCI: not using MMCONFIG
[    0.599580] PCI: Using configuration type 1 for base access
[    0.602133] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.604108] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.604108] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.605632] ACPI: Added _OSI(Module Device)
[    0.605634] ACPI: Added _OSI(Processor Device)
[    0.605635] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.605636] ACPI: Added _OSI(Processor Aggregator Device)
[    0.605638] ACPI: Added _OSI(Linux-Dell-Video)
[    0.605639] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.605641] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.710141] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.GPLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.710151] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.710154] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.710158] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.TPLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.710163] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.710165] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.710168] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.GUPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.710172] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.710174] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.710176] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.TUPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.710180] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.710182] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.710234] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.710239] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.710241] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.710244] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.710248] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.710251] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.714196] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.714202] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.714204] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.714207] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.714211] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.714213] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.718169] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.718175] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.718177] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.718180] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.718184] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.718186] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.722142] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.722147] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.722150] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.722152] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.722156] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.722159] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.726112] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.726117] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.726119] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.726122] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.726126] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.726128] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.730077] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.730083] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.730085] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.730087] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.730092] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.730094] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.737647] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.737653] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.737655] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.737658] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.737662] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.737664] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.741607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.741612] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.741615] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.741617] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.741621] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.741623] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.745578] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.745583] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.745585] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.745588] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.745592] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.745594] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.749699] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.749705] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.749707] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.749709] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.749713] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.749716] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.749773] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.749778] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.749780] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.749783] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.749787] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.749789] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.749845] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.749850] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.749852] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.749855] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.749859] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.749861] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.749917] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.749921] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.749923] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.749926] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.749930] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.749932] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.749988] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.749992] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.749994] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.749997] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.750001] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.750003] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.750059] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.750063] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.750065] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.750068] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20200110/dswload2-323)
[    0.750072] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200110/psobject-220)
[    0.750074] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.752671] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.768645] ACPI: Dynamic OEM Table Load:
[    0.768668] ACPI: SSDT 0xFFFF9ADB0FEEF100 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.771531] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.774648] ACPI: Dynamic OEM Table Load:
[    0.774660] ACPI: SSDT 0xFFFF9ADB0FF1E000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.777745] ACPI: Dynamic OEM Table Load:
[    0.777756] ACPI: SSDT 0xFFFF9ADB107BC000 000560 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.781654] ACPI: Dynamic OEM Table Load:
[    0.781666] ACPI: SSDT 0xFFFF9ADB107BA000 000778 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.785340] ACPI: Dynamic OEM Table Load:
[    0.785355] ACPI: SSDT 0xFFFF9ADB0FEFD000 000D74 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.790084] ACPI: Dynamic OEM Table Load:
[    0.790094] ACPI: SSDT 0xFFFF9ADB0FF1A400 0003CA (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.799987] ACPI: EC: EC started
[    0.799989] ACPI: EC: interrupt blocked
[    0.800933] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.800936] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.800938] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.800939] ACPI: Interpreter enabled
[    0.801030] ACPI: (supports S0 S3 S4 S5)
[    0.801032] ACPI: Using IOAPIC for interrupt routing
[    0.801104] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.804898] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.804923] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.807289] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.817392] ACPI: Power Resource [USBC] (on)
[    0.842284] ACPI: Power Resource [V0PR] (on)
[    0.842655] ACPI: Power Resource [V1PR] (on)
[    0.843013] ACPI: Power Resource [V2PR] (on)
[    0.849542] ACPI: Power Resource [WRST] (on)
[    0.860556] ACPI: Power Resource [FN00] (off)
[    0.860746] ACPI: Power Resource [FN01] (off)
[    0.860936] ACPI: Power Resource [FN02] (off)
[    0.861119] ACPI: Power Resource [FN03] (off)
[    0.861303] ACPI: Power Resource [FN04] (off)
[    0.862673] ACPI: Power Resource [PIN] (off)
[    0.863679] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.863690] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.867657] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.872464] PCI host bridge to bus 0000:00
[    0.872468] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.872470] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.872472] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.872474] pci_bus 0000:00: root bus resource [mem 0x9b800000-0xdfffffff window]
[    0.872475] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.872477] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.872493] pci 0000:00:00.0: [8086:9b61] type 00 class 0x060000
[    0.874744] pci 0000:00:02.0: [8086:9b41] type 00 class 0x030000
[    0.874763] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[    0.874773] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.874780] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.874806] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.876618] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.876638] pci 0000:00:04.0: reg 0x10: [mem 0xb1510000-0xb1517fff 64bit]
[    0.878492] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.878512] pci 0000:00:08.0: reg 0x10: [mem 0xb1520000-0xb1520fff 64bit]
[    0.880316] pci 0000:00:12.0: [8086:02f9] type 00 class 0x118000
[    0.880344] pci 0000:00:12.0: reg 0x10: [mem 0xb1521000-0xb1521fff 64bit]
[    0.882180] pci 0000:00:14.0: [8086:02ed] type 00 class 0x0c0330
[    0.882207] pci 0000:00:14.0: reg 0x10: [mem 0xb1500000-0xb150ffff 64bit]
[    0.882301] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.884137] pci 0000:00:14.2: [8086:02ef] type 00 class 0x050000
[    0.884163] pci 0000:00:14.2: reg 0x10: [mem 0xb151c000-0xb151dfff 64bit]
[    0.884177] pci 0000:00:14.2: reg 0x18: [mem 0xb1522000-0xb1522fff 64bit]
[    0.885982] pci 0000:00:15.0: [8086:02e8] type 00 class 0x0c8000
[    0.886014] pci 0000:00:15.0: reg 0x10: [mem 0xb1523000-0xb1523fff 64bit]
[    0.887950] pci 0000:00:16.0: [8086:02e0] type 00 class 0x078000
[    0.887983] pci 0000:00:16.0: reg 0x10: [mem 0xb1524000-0xb1524fff 64bit]
[    0.888084] pci 0000:00:16.0: PME# supported from D3hot
[    0.890031] pci 0000:00:17.0: [8086:02d3] type 00 class 0x010601
[    0.890055] pci 0000:00:17.0: reg 0x10: [mem 0xb151e000-0xb151ffff]
[    0.890065] pci 0000:00:17.0: reg 0x14: [mem 0xb1529000-0xb15290ff]
[    0.890075] pci 0000:00:17.0: reg 0x18: [io  0x4080-0x4087]
[    0.890085] pci 0000:00:17.0: reg 0x1c: [io  0x4088-0x408b]
[    0.890094] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[    0.890104] pci 0000:00:17.0: reg 0x24: [mem 0xb1528000-0xb15287ff]
[    0.890160] pci 0000:00:17.0: PME# supported from D3hot
[    0.892043] pci 0000:00:1d.0: [8086:02b0] type 01 class 0x060400
[    0.892163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.892191] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.894091] pci 0000:00:1d.1: [8086:02b1] type 01 class 0x060400
[    0.894206] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[    0.894234] pci 0000:00:1d.1: PTM enabled (root), 4ns granularity
[    0.896129] pci 0000:00:1d.2: [8086:02b2] type 01 class 0x060400
[    0.896243] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[    0.896270] pci 0000:00:1d.2: PTM enabled (root), 4ns granularity
[    0.898170] pci 0000:00:1d.4: [8086:02b4] type 01 class 0x060400
[    0.898305] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.898336] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity
[    0.900270] pci 0000:00:1e.0: [8086:02a8] type 00 class 0x078000
[    0.900303] pci 0000:00:1e.0: reg 0x10: [mem 0xb1525000-0xb1525fff 64bit]
[    0.902286] pci 0000:00:1f.0: [8086:0284] type 00 class 0x060100
[    0.904200] pci 0000:00:1f.3: [8086:02c8] type 00 class 0x040300
[    0.904268] pci 0000:00:1f.3: reg 0x10: [mem 0xb1518000-0xb151bfff 64bit]
[    0.904332] pci 0000:00:1f.3: reg 0x20: [mem 0xb1000000-0xb10fffff 64bit]
[    0.904468] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.906447] pci 0000:00:1f.4: [8086:02a3] type 00 class 0x0c0500
[    0.906478] pci 0000:00:1f.4: reg 0x10: [mem 0xb1526000-0xb15260ff 64bit]
[    0.906505] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.908357] pci 0000:00:1f.5: [8086:02a4] type 00 class 0x0c8000
[    0.908378] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.910250] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.910286] pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.910317] pci 0000:01:00.0: reg 0x18: [mem 0xb1404000-0xb1404fff 64bit]
[    0.910337] pci 0000:01:00.0: reg 0x20: [mem 0xb1400000-0xb1403fff 64bit]
[    0.910461] pci 0000:01:00.0: supports D1 D2
[    0.910463] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.910673] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.910680] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.910684] pci 0000:00:1d.0:   bridge window [mem 0xb1400000-0xb14fffff]
[    0.911144] pci 0000:02:00.0: [10ec:c822] type 00 class 0x028000
[    0.911195] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.911230] pci 0000:02:00.0: reg 0x18: [mem 0xb1300000-0xb130ffff 64bit]
[    0.911700] pci 0000:02:00.0: supports D1 D2
[    0.911702] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.912513] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.912518] pci 0000:00:1d.1:   bridge window [io  0x2000-0x2fff]
[    0.912522] pci 0000:00:1d.1:   bridge window [mem 0xb1300000-0xb13fffff]
[    0.912726] pci 0000:03:00.0: [10ec:522a] type 00 class 0xff0000
[    0.912765] pci 0000:03:00.0: reg 0x10: [mem 0xb1200000-0xb1200fff]
[    0.913055] pci 0000:03:00.0: supports D1 D2
[    0.913057] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.913577] pci 0000:00:1d.2: PCI bridge to [bus 03]
[    0.913583] pci 0000:00:1d.2:   bridge window [mem 0xb1200000-0xb12fffff]
[    0.913834] pci 0000:04:00.0: [144d:a808] type 00 class 0x010802
[    0.913869] pci 0000:04:00.0: reg 0x10: [mem 0xb1100000-0xb1103fff 64bit]
[    0.914351] pci 0000:00:1d.4: PCI bridge to [bus 04]
[    0.914357] pci 0000:00:1d.4:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.919459] ACPI: EC: interrupt unblocked
[    0.919472] ACPI: EC: event unblocked
[    0.919492] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.919495] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.919626] iommu: Default domain type: Translated
[    0.919649] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.919649] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.919649] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.919649] vgaarb: loaded
[    0.919649] SCSI subsystem initialized
[    0.919649] libata version 3.00 loaded.
[    0.919649] ACPI: bus type USB registered
[    0.919649] usbcore: registered new interface driver usbfs
[    0.919649] usbcore: registered new interface driver hub
[    0.919649] usbcore: registered new device driver usb
[    0.919649] pps_core: LinuxPPS API ver. 1 registered
[    0.919649] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.919649] PTP clock support registered
[    0.919649] EDAC MC: Ver: 3.0.0
[    0.919691] Registered efivars operations
[    0.919691] PCI: Using ACPI for IRQ routing
[    0.947675] PCI: pci_cache_line_size set to 64 bytes
[    0.948994] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.948996] e820: reserve RAM buffer [mem 0x79cd6000-0x7bffffff]
[    0.948997] e820: reserve RAM buffer [mem 0x7e4d1000-0x7fffffff]
[    0.948998] e820: reserve RAM buffer [mem 0x8fc50000-0x8fffffff]
[    0.948999] e820: reserve RAM buffer [mem 0x462800000-0x463ffffff]
[    0.949151] NetLabel: Initializing
[    0.949152] NetLabel:  domain hash size = 128
[    0.949152] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.949171] NetLabel:  unlabeled traffic allowed by default
[    0.949819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.949825] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.954287] clocksource: Switched to clocksource tsc-early
[    0.969787] *** VALIDATE bpf ***
[    0.969937] VFS: Disk quotas dquot_6.6.0
[    0.969961] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.969997] *** VALIDATE ramfs ***
[    0.970002] *** VALIDATE hugetlbfs ***
[    0.970064] pnp: PnP ACPI init
[    0.970289] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.970297] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.970696] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.970699] system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.970701] system 00:01: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.970703] system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.970706] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.970708] system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.970710] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[    0.970716] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.971297] system 00:02: [io  0xff00-0xfffe] has been reserved
[    0.971302] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.971595] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.971597] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.971602] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.971828] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.971834] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.971910] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.972993] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.972995] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.972998] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.973000] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.973002] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.973004] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.973006] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.973008] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.973013] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.973756] system 00:07: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.973761] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.974229] pnp: PnP ACPI: found 8 devices
[    0.980842] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.980898] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.980903] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.980908] pci 0000:00:1d.0:   bridge window [mem 0xb1400000-0xb14fffff]
[    0.980916] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.980919] pci 0000:00:1d.1:   bridge window [io  0x2000-0x2fff]
[    0.980923] pci 0000:00:1d.1:   bridge window [mem 0xb1300000-0xb13fffff]
[    0.980931] pci 0000:00:1d.2: PCI bridge to [bus 03]
[    0.980935] pci 0000:00:1d.2:   bridge window [mem 0xb1200000-0xb12fffff]
[    0.980943] pci 0000:00:1d.4: PCI bridge to [bus 04]
[    0.980954] pci 0000:00:1d.4:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.980964] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.980966] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.980968] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.980970] pci_bus 0000:00: resource 7 [mem 0x9b800000-0xdfffffff window]
[    0.980972] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.980974] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.980976] pci_bus 0000:01: resource 1 [mem 0xb1400000-0xb14fffff]
[    0.980977] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.980979] pci_bus 0000:02: resource 1 [mem 0xb1300000-0xb13fffff]
[    0.980981] pci_bus 0000:03: resource 1 [mem 0xb1200000-0xb12fffff]
[    0.980983] pci_bus 0000:04: resource 1 [mem 0xb1100000-0xb11fffff]
[    0.981305] NET: Registered protocol family 2
[    0.981518] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.981648] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.981946] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.982070] TCP: Hash tables configured (established 131072 bind 65536)
[    0.982158] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.982228] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.982372] NET: Registered protocol family 1
[    0.982378] NET: Registered protocol family 44
[    0.982393] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.983637] PCI: CLS 0 bytes, default 64
[    0.983687] Trying to unpack rootfs image as initramfs...
[    1.325078] Freeing initrd memory: 15628K
[    1.348864] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.348866] software IO TLB: mapped [mem 0x6e7f2000-0x727f2000] (64MB)
[    1.348982] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.349193] check: Scanning for low memory corruption every 60 seconds
[    1.349765] Initialise system trusted keyrings
[    1.349779] Key type blacklist registered
[    1.349849] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    1.351750] zbud: loaded
[    1.359251] Key type asymmetric registered
[    1.359253] Asymmetric key parser 'x509' registered
[    1.359264] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.359343] io scheduler mq-deadline registered
[    1.359345] io scheduler kyber registered
[    1.359381] io scheduler bfq registered
[    1.362229] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[    1.362306] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[    1.362365] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    1.362762] pcieport 0000:00:1d.1: PME: Signaling with IRQ 123
[    1.362828] pcieport 0000:00:1d.1: AER: enabled with IRQ 123
[    1.362885] pcieport 0000:00:1d.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    1.363259] pcieport 0000:00:1d.2: PME: Signaling with IRQ 124
[    1.363325] pcieport 0000:00:1d.2: AER: enabled with IRQ 124
[    1.363380] pcieport 0000:00:1d.2: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    1.363784] pcieport 0000:00:1d.4: PME: Signaling with IRQ 125
[    1.363864] pcieport 0000:00:1d.4: AER: enabled with IRQ 125
[    1.363940] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    1.364083] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.364207] efifb: probing for efifb
[    1.364230] efifb: showing boot graphics
[    1.366378] efifb: framebuffer at 0xa0000000, using 8128k, total 8128k
[    1.366380] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.366381] efifb: scrolling: redraw
[    1.366383] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.366449] fbcon: Deferring console take-over
[    1.366451] fb0: EFI VGA frame buffer device
[    1.366461] intel_idle: MWAIT substates: 0x11142120
[    1.366463] intel_idle: v0.4.1 model 0x8E
[    1.367180] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.367326] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.367358] ACPI: Lid Switch [LID0]
[    1.367414] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.367436] ACPI: Power Button [PWRB]
[    1.367483] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.368895] ACPI: Power Button [PWRF]
[    1.374829] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20200110/psargs-330)
[    1.374840] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[    1.374887] [Firmware Bug]: Invalid critical threshold (0)
[    1.375089] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20200110/psargs-330)
[    1.375096] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[    1.375639] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.376765] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.376767] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.378504] nvme nvme0: pci function 0000:04:00.0
[    1.378548] ahci 0000:00:17.0: version 3.0
[    1.378934] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    1.378938] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst
[    1.379819] scsi host0: ahci
[    1.380258] scsi host1: ahci
[    1.380330] ata1: DUMMY
[    1.380332] ata2: SATA max UDMA/133 abar m2048@0xb1528000 port 0xb1528180 irq 126
[    1.380396] usbcore: registered new interface driver usbserial_generic
[    1.380401] usbserial: USB Serial support registered for generic
[    1.380443] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.381437] rtc_cmos rtc_cmos: registered as rtc0
[    1.381457] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.381551] intel_pstate: Intel P-state driver initializing
[    1.382294] intel_pstate: HWP enabled
[    1.382508] ledtrig-cpu: registered to indicate activity on CPUs
[    1.382614] intel_pmc_core INT33A1:00:  initialized
[    1.382704] drop_monitor: Initializing network drop monitor service
[    1.382848] NET: Registered protocol family 10
[    1.387043] Segment Routing with IPv6
[    1.387060] NET: Registered protocol family 17
[    1.387384] RAS: Correctable Errors collector initialized.
[    1.387415] microcode: sig=0x806ec, pf=0x4, revision=0xca
[    1.387506] microcode: Microcode Update Driver: v2.2.
[    1.387510] IPI shorthand broadcast: enabled
[    1.387515] sched_clock: Marking stable (1382986155, 4517208)->(1395814537, -8311174)
[    1.387608] registered taskstats version 1
[    1.387615] Loading compiled-in X.509 certificates
[    1.390073] Loaded X.509 cert 'Build time autogenerated kernel key: 5fedf10500f4f89274a72136ae4d94a39b20e616'
[    1.390103] zswap: loaded using pool lzo/zbud
[    1.390188] Key type ._fscrypt registered
[    1.390189] Key type .fscrypt registered
[    1.390189] Key type fscrypt-provisioning registered
[    1.394116] Key type big_key registered
[    1.395236] PM:   Magic number: 0:69:683
[    1.395506] rtc_cmos rtc_cmos: setting system clock to 2020-04-09T12:40:08 UTC (1586436008)
[    1.593690] nvme nvme0: missing or invalid SUBNQN field.
[    1.593739] nvme nvme0: Shutdown timeout set to 8 seconds
[    1.647537] nvme nvme0: 8/0/0 default/read/poll queues
[    1.667294]  nvme0n1: p1 p2 p3
[    1.688842] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.711146] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.711153] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.711156] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.821600] ata2.00: ATA-10: ST2000LM015-2E8174, 0001, max UDMA/133
[    1.821605] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.853663] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.853670] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.853673] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.891198] ata2.00: configured for UDMA/133
[    1.891491] scsi 1:0:0:0: Direct-Access     ATA      ST2000LM015-2E81 0001 PQ: 0 ANSI: 5
[    1.891964] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.891969] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.891986] sd 1:0:0:0: [sda] Write Protect is off
[    1.891990] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.892017] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.909106] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.911162] Freeing unused decrypted memory: 2040K
[    1.911849] Freeing unused kernel image (initmem) memory: 1620K
[    1.922369] Write protecting the kernel read-only data: 20480k
[    1.923671] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    1.924352] Freeing unused kernel image (rodata/data gap) memory: 1644K
[    1.934129] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.934131] Run /init as init process
[    1.934132]   with arguments:
[    1.934132]     /init
[    1.934133]   with environment:
[    1.934133]     HOME=/
[    1.934134]     TERM=linux
[    1.934134]     BOOT_IMAGE=/boot/vmlinuz-linux
[    1.969882] fbcon: Taking over console
[    1.969959] Console: switching to colour frame buffer device 240x67
[    1.975278] Linux agpgart interface v0.103
[    2.018650] Setting dangerous option enable_guc - tainting kernel
[    2.018652] Setting dangerous option enable_fbc - tainting kernel
[    2.019559] checking generic (a0000000 7f0000) vs hw (b0000000 1000000)
[    2.019560] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
[    2.019560] fb0: switching to inteldrmfb from EFI VGA
[    2.019613] Console: switching to colour dummy device 80x25
[    2.019640] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.021045] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.021046] [drm] Driver supports precise vblank timestamp query.
[    2.021862] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.022374] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    2.059006] [drm] GuC communication enabled
[    2.068961] i915 0000:00:02.0: GuC firmware i915/kbl_guc_33.0.0.bin version 33.0 submission:disabled
[    2.068962] i915 0000:00:02.0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0 authenticated:yes
[    2.070572] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
[    2.073226] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.073636] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    2.092887] fbcon: i915drmfb (fb0) is primary device
[    2.095502] Console: switching to colour frame buffer device 240x67
[    2.123010] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    2.230600] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.230601] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.232657] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.236859] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    2.238881] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.238887] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.239962] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    2.239966] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.240121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    2.240123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.240123] usb usb1: Product: xHCI Host Controller
[    2.240124] usb usb1: Manufacturer: Linux 5.6.3-arch1-1 xhci-hcd
[    2.240125] usb usb1: SerialNumber: 0000:00:14.0
[    2.240230] hub 1-0:1.0: USB hub found
[    2.240247] hub 1-0:1.0: 12 ports detected
[    2.242598] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.242601] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.242604] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.242646] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    2.242648] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.242649] usb usb2: Product: xHCI Host Controller
[    2.242650] usb usb2: Manufacturer: Linux 5.6.3-arch1-1 xhci-hcd
[    2.242651] usb usb2: SerialNumber: 0000:00:14.0
[    2.242748] hub 2-0:1.0: USB hub found
[    2.242760] hub 2-0:1.0: 6 ports detected
[    2.255581] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.362192] tsc: Refined TSC clocksource calibration: 2112.020 MHz
[    2.362209] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e718b6010d, max_idle_ns: 440795204373 ns
[    2.362288] clocksource: Switched to clocksource tsc
[    2.408138] random: fast init done
[    2.414713] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.489878] systemd[1]: systemd 245.4-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.505946] systemd[1]: Detected architecture x86-64.
[    2.537695] systemd[1]: Set hostname to <leavitt>.
[    2.572186] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    2.651979] systemd[1]: Created slice system-getty.slice.
[    2.652123] systemd[1]: Created slice system-modprobe.slice.
[    2.652270] systemd[1]: Created slice Cryptsetup Units Slice.
[    2.652433] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.652547] systemd[1]: Created slice User and Session Slice.
[    2.652579] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.652601] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.652691] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.652711] systemd[1]: Reached target Login Prompts.
[    2.652722] systemd[1]: Reached target Remote File Systems.
[    2.652727] systemd[1]: Reached target Slices.
[    2.652786] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.652917] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.653037] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.654069] systemd[1]: Listening on Process Core Dump Socket.
[    2.654098] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.654178] systemd[1]: Listening on Journal Audit Socket.
[    2.654220] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.654265] systemd[1]: Listening on Journal Socket.
[    2.654314] systemd[1]: Listening on udev Control Socket.
[    2.654344] systemd[1]: Listening on udev Kernel Socket.
[    2.654861] systemd[1]: Mounting Huge Pages File System...
[    2.655410] systemd[1]: Mounting POSIX Message Queue File System...
[    2.655965] systemd[1]: Mounting Kernel Debug File System...
[    2.656540] systemd[1]: Mounting Kernel Trace File System...
[    2.657408] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.657888] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    2.657906] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    2.658628] systemd[1]: Starting Set Up Additional Binary Formats...
[    2.658661] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.659586] systemd[1]: Starting Journal Service...
[    2.660457] systemd[1]: Starting Load Kernel Modules...
[    2.661160] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.661841] systemd[1]: Starting udev Coldplug all Devices...
[    2.662700] systemd[1]: Mounted Huge Pages File System.
[    2.662778] systemd[1]: Mounted POSIX Message Queue File System.
[    2.662843] systemd[1]: Mounted Kernel Debug File System.
[    2.662908] systemd[1]: Mounted Kernel Trace File System.
[    2.663196] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.663666] random: lvm: uninitialized urandom read (4 bytes read)
[    2.665796] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 311 (systemd-binfmt)
[    2.667003] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    2.668094] EXT4-fs (nvme0n1p2): re-mounted. Opts: (null)
[    2.668102] systemd[1]: Started LVM2 metadata daemon.
[    2.669199] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.669303] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    2.669422] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    2.669982] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.670561] systemd[1]: Starting Load/Save Random Seed...
[    2.671214] systemd[1]: Starting Create System Users...
[    2.671676] systemd[1]: Finished Set Up Additional Binary Formats.
[    2.671932] i2c /dev entries driver
[    2.681929] hid: raw HID events driver (C) Jiri Kosina
[    2.689716] systemd[1]: Finished Create System Users.
[    2.690281] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.690586] systemd[1]: Finished Load Kernel Modules.
[    2.690723] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    2.691197] systemd[1]: Mounting Kernel Configuration File System...
[    2.691914] systemd[1]: Starting Apply Kernel Variables...
[    2.692906] systemd[1]: Mounted Kernel Configuration File System.
[    2.698375] systemd[1]: Finished Apply Kernel Variables.
[    2.700559] systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.701439] systemd[1]: Starting udev Kernel Device Manager...
[    2.710775] systemd[1]: Finished udev Coldplug all Devices.
[    2.714336] usb 1-4: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    2.714338] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.714339] usb 1-4: Product: USB Receiver
[    2.714340] usb 1-4: Manufacturer: Logitech
[    2.838851] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    2.863443] usb 1-5: New USB device found, idVendor=27c6, idProduct=55a4, bcdDevice= 1.00
[    2.863444] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.863445] usb 1-5: Product: Goodix FingerPrint Device
[    2.863446] usb 1-5: Manufacturer: Generic
[    2.916682] systemd[1]: Started Journal Service.
[    2.916786] audit: type=1130 audit(1586436010.016:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.922429] systemd-journald[312]: Received client request to flush runtime journal.
[    2.979273] audit: type=1130 audit(1586436010.080:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.983607] audit: type=1130 audit(1586436010.083:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.985564] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[    3.006759] ACPI: AC Adapter [ACAD] (on-line)
[    3.023466] usb 1-6: New USB device found, idVendor=5986, idProduct=2113, bcdDevice=54.23
[    3.023469] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.023471] usb 1-6: Product: Integrated Camera
[    3.023472] usb 1-6: Manufacturer: SunplusIT Inc
[    3.086990] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    3.087101] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    3.087229] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    3.096520] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
[    3.145121] audit: type=1130 audit(1586436010.243:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.145515] usb 1-10: new full-speed USB device number 5 using xhci_hcd
[    3.231526] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    3.231994] intel_rapl_common: Found RAPL domain package
[    3.231995] intel_rapl_common: Found RAPL domain dram
[    3.232090] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    3.233483] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    3.233740] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.233803] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.238420] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[    3.238653] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    3.286358] usb 1-10: New USB device found, idVendor=0bda, idProduct=c123, bcdDevice= 0.00
[    3.286360] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.286361] usb 1-10: Product: Bluetooth Radio
[    3.286362] usb 1-10: Manufacturer: Realtek
[    3.286363] usb 1-10: SerialNumber: 00e04c000001
[    3.310493] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[    3.310497] device-mapper: uevent: version 1.0.3
[    3.310565] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[    3.311222] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    3.311272] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    3.327039] libphy: r8169: probed
[    3.327161] r8169 0000:01:00.0 eth0: RTL8168h/8111h, b4:a9:fc:57:1c:c2, XID 541, IRQ 140
[    3.327163] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.327268] audit: type=1130 audit(1586436010.426:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-ask-password-console comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.331038] Adding 33748288k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:33748288k SSFS
[    3.433047] audit: type=1130 audit(1586436010.533:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.452967] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.452969] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.452970] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.452970] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.452971] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.452971] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.457496] audit: type=1130 audit(1586436010.556:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-D2B0\x2dB5A3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.522703] intel-spi 0000:00:1f.5: w25q128 (16384 Kbytes)
[    3.528943] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.532208] Creating 1 MTD partitions on "0000:00:1f.5":
[    3.532211] 0x000000000000-0x000001000000 : "BIOS"
[    3.535261] cryptd: max_cpu_qlen set to 1000
[    3.539035] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.539679] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.539680] cfg80211: failed to load regulatory.db
[    3.545308] AVX2 version of gcm_enc/dec engaged.
[    3.545309] AES CTR mode by8 optimization enabled
[    3.547242] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.547445] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.722830] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.722833] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.722834] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.722835] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.722837] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.722838] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    3.722839] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.748767] rtw_pci 0000:02:00.0: enabling device (0000 -> 0003)
[    3.749379] rtw_pci 0000:02:00.0: Firmware version 7.3.0, H2C version 14
[    3.749454] rtw_pci 0000:02:00.0: Firmware version 7.3.0, H2C version 14
[    3.818319] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[    3.818383] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[    3.818423] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    3.818477] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    3.818519] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    3.818565] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.818605] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.818646] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.925497] usbcore: registered new interface driver usbhid
[    3.925498] usbhid: USB HID core driver
[    3.927158] mc: Linux media interface: v0.10
[    3.942731] intel_rapl_common: Found RAPL domain package
[    3.942733] intel_rapl_common: Found RAPL domain core
[    3.942734] intel_rapl_common: Found RAPL domain uncore
[    3.942735] intel_rapl_common: Found RAPL domain dram
[    3.943790] videodev: Linux video capture interface: v2.00
[    3.951627] iTCO_vendor_support: vendor-support=0
[    3.953544] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    3.983203] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.983316] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    3.983407] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.983537] rtw_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[    3.995501] random: crng init done
[    3.999440] audit: type=1130 audit(1586436011.100:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.054762] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:2113)
[    4.057329] audit: type=1130 audit(1586436011.156:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.065249] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C534.0001/input/input14
[    4.065814] dw-apb-uart.1: ttyS0 at MMIO 0xb1525000 (irq = 20, base_baud = 7500000) is a 16550A
[    4.072446] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    4.072448] uvcvideo 1-6:1.0: Entity type for entity Extension 3 was not initialized!
[    4.072449] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    4.072450] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    4.072504] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input15
[    4.113349] Bluetooth: Core ver 2.22
[    4.113365] NET: Registered protocol family 31
[    4.113366] Bluetooth: HCI device and connection manager initialized
[    4.113369] Bluetooth: HCI socket layer initialized
[    4.113370] Bluetooth: L2CAP socket layer initialized
[    4.113373] Bluetooth: SCO socket layer initialized
[    4.118962] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    4.119004] usbcore: registered new interface driver uvcvideo
[    4.119005] USB Video Class driver (1.1.1)
[    4.119217] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C534.0002/input/input16
[    4.119294] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C534.0002/input/input17
[    4.122615] usbcore: registered new interface driver btusb
[    4.127565] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822
[    4.128556] Bluetooth: hci0: RTL: rom_version status=0 version=3
[    4.128558] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin
[    4.128890] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin
[    4.129051] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30446
[    4.175814] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C534.0002/input/input18
[    4.176265] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    4.277761] Bluetooth: hci0: RTL: fw version 0x0998c2b4
[    4.321540] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    4.537060] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    4.594733] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[    4.595544] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input21
[    4.596035] hid-generic 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-4/input1:2
[    4.697408] mousedev: PS/2 mouse device common for all mice
[    4.856846] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input25
[    4.857455] logitech-hidpp-device 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-4/input1:2
[    8.469008] ucsi_acpi USBC000:00: PPM init failed (-110)
[    9.132574] audit: type=1131 audit(1586436016.233:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.213859] battery: ACPI: Battery Slot [BAT1] (battery present)
[    9.230738] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[   10.933299] audit: type=1130 audit(1586436018.033:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-cryptsetup@home comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.101547] audit: type=1130 audit(1586436018.200:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-mapper-home comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.138502] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   11.151927] audit: type=1130 audit(1586436018.250:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.157781] audit: type=1127 audit(1586436018.256:15): pid=509 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   11.159760] audit: type=1130 audit(1586436018.260:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.164223] audit: type=1130 audit(1586436018.263:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.239765] audit: type=1130 audit(1586436018.340:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.245715] audit: type=1130 audit(1586436018.346:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.247722] audit: type=1130 audit(1586436018.346:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=acpid comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.606786] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[   11.720328] r8169 0000:01:00.0 enp1s0: Link is Down
[   12.751453] rtw_pci 0000:02:00.0: start vif 40:5b:d8:49:6f:0d on port 0
[   12.752975] rtw_pci 0000:02:00.0: stop vif 40:5b:d8:49:6f:0d on port 0
[   12.930592] rtw_pci 0000:02:00.0: start vif 26:58:b5:59:04:00 on port 0
[   16.990273] rtw_pci 0000:02:00.0: stop vif 26:58:b5:59:04:00 on port 0
[   17.167605] rtw_pci 0000:02:00.0: start vif 40:5b:d8:49:6f:0d on port 0
[   19.934317] kauditd_printk_skb: 31 callbacks suppressed
[   19.934320] audit: type=1100 audit(1586436027.033:52): pid=571 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_tally2,pam_shells,pam_unix,pam_permit acct="rnp" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[   19.937818] audit: type=1101 audit(1586436027.036:53): pid=571 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="rnp" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[   20.003815] audit: type=1106 audit(1586436027.106:54): pid=548 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="sddm" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=:0 res=success'
[   20.003891] audit: type=1104 audit(1586436027.106:55): pid=548 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="sddm" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=:0 res=success'
[   20.026535] audit: type=1103 audit(1586436027.126:56): pid=571 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_tally2,pam_shells,pam_unix,pam_permit acct="rnp" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[   20.026925] audit: type=1006 audit(1586436027.126:57): pid=571 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   20.063637] audit: type=1130 audit(1586436027.163:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.078789] audit: type=1101 audit(1586436027.176:59): pid=573 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="rnp" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.079133] audit: type=1103 audit(1586436027.180:60): pid=573 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="rnp" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   20.079349] audit: type=1006 audit(1586436027.180:61): pid=573 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   21.031568] wlp2s0: authenticate with f4:f2:6d:b6:b5:81
[   21.178071] wlp2s0: send auth to f4:f2:6d:b6:b5:81 (try 1/3)
[   21.182833] wlp2s0: authenticated
[   21.185511] wlp2s0: associate with f4:f2:6d:b6:b5:81 (try 1/3)
[   21.189350] wlp2s0: RX AssocResp from f4:f2:6d:b6:b5:81 (capab=0x11 status=0 aid=3)
[   21.189373] rtw_pci 0000:02:00.0: sta f4:f2:6d:b6:b5:81 joined with macid 0
[   21.418369] wlp2s0: associated
[   22.244985] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   24.277607] fuse: init (API version 7.31)
[   24.277636] *** VALIDATE fuseblk ***
[   24.277639] *** VALIDATE fuse ***
[   25.453656] kauditd_printk_skb: 15 callbacks suppressed
[   25.453663] audit: type=1130 audit(1586436032.553:77): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.285666] audit: type=1131 audit(1586436037.386:78): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.301235] audit: type=1131 audit(1586436037.400:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.017416] audit: type=1131 audit(1586436040.116:80): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.601793] audit: type=1131 audit(1586436048.700:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.679032] audit: type=1334 audit(1586436048.780:82): prog-id=10 op=UNLOAD
[   41.679046] audit: type=1334 audit(1586436048.780:83): prog-id=9 op=UNLOAD

Last edited by rnp (2020-04-09 13:10:32)

rnp · 2020-04-12 12:52:49

I found this thread on the Ubuntu bug tracker. The comment 23 mentions a bios update, and the comment 25 says it worked.

I applied the BIOS update cjcn26ww.exe mentioned above running Windows 10, and afterwards the touchpad works on my laptop running Arch Linux Kernel 5.6.3-arch1-1. However, I did not applied the firmware update mentioned in the comment 24.

Arch Linux

#1 2019-12-14 10:34:48

Lenovo ThinkBook 15 TouchPad not detected

#2 2019-12-14 10:52:24

Re: Lenovo ThinkBook 15 TouchPad not detected

#3 2019-12-14 10:56:32

Re: Lenovo ThinkBook 15 TouchPad not detected

#4 2019-12-14 11:10:31

Re: Lenovo ThinkBook 15 TouchPad not detected

#5 2020-04-09 13:08:51

Re: Lenovo ThinkBook 15 TouchPad not detected

#6 2020-04-12 12:52:49

Re: Lenovo ThinkBook 15 TouchPad not detected

Board footer