You are not logged in.
I rebooted my laptop after an update, and my external monitors are no longer producing output.
My discrete GPU is an NVIDIA GF108 (according to nouveau).
My laptop display is connected to the integrated GPU, I'm using the xf86-video-intel driver.
I have two external monitors that are only connected to the NVIDIA GPU and I'm using the xf86-video-nouveau driver.
Video on the laptop display is working properly.
The external monitors are detected by xrandr and active:
xrandr --listactivemonitors
Monitors: 3
0: +LVDS1 1600/340x900/190+1680+581 LVDS1
1: +DP-1-2 2560/697x1440/392+3280+0 DP-1-2
2: +DP-1-3 1680/474x1050/296+0+506 DP-1-3Nouveau is listed as the provider:
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x45 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 3 associated providers: 1 name:Intel
Provider 1: id: 0xae cap: 0x7, Source Output, Sink Output, Source Offload crtcs: 2 outputs: 5 associated providers: 1 name:nouveauHowever, no output is produced. My external monitors both display "no signal".
I have tried reinstalling nouveau, not using Intel (I was only using modesetting before, tried to see if Intel would fix it).
According to dmesg, nouveaudrmfb is fb1. fb0 is i915drmfb (both before and after installing xf86-video-intel).
According to https://nouveau.freedesktop.org/wiki/KernelModeSetting/, nouveau should be fb0, but it seems that this page may be out of date and I'm not sure if that is correct for Optimus setups.
Here is the output of dmesg | grep nouveau, in case it helps:
[ 4.666306] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.666483] nouveau 0000:01:00.0: NVIDIA GF108 (0c1d00a1)
[ 4.683036] nouveau 0000:01:00.0: bios: version 70.08.55.00.0c
[ 4.779288] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[ 4.872023] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 4.872025] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 4.872030] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 4.872032] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 4.872034] nouveau 0000:01:00.0: DRM: DCB outp 00: 01800323 00010034
[ 4.872036] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011300 00000000
[ 4.872038] nouveau 0000:01:00.0: DRM: DCB outp 02: 028223a6 0f220010
[ 4.872039] nouveau 0000:01:00.0: DRM: DCB outp 03: 02822362 00020010
[ 4.872040] nouveau 0000:01:00.0: DRM: DCB outp 04: 048333b6 0f220010
[ 4.872042] nouveau 0000:01:00.0: DRM: DCB outp 05: 04833372 00020010
[ 4.872043] nouveau 0000:01:00.0: DRM: DCB outp 06: 088443c6 0f220010
[ 4.872045] nouveau 0000:01:00.0: DRM: DCB outp 07: 08844382 00020010
[ 4.872047] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
[ 4.872048] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[ 4.872050] nouveau 0000:01:00.0: DRM: DCB conn 02: 00101246
[ 4.872051] nouveau 0000:01:00.0: DRM: DCB conn 03: 00202346
[ 4.872053] nouveau 0000:01:00.0: DRM: DCB conn 04: 00410446
[ 4.873166] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 5.143698] nouveau 0000:01:00.0: DRM: allocated 3840x2160 fb: 0x60000, bo (____ptrval____)
[ 5.824619] nouveau 0000:01:00.0: fb1: nouveaudrmfb frame buffer device
[ 5.855669] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 9.846236] nouveau 0000:01:00.0: disp: ERROR 4 [INVALID_ARG] 84 [] chid 0 mthd 0804 data 008ae02e
[ 9.853670] Workqueue: nvkm-disp nv50_disp_super [nouveau]
[ 9.853702] RIP: 0010:nv50_disp_super_2_2+0x190/0x450 [nouveau]
[ 9.853759] nv50_disp_super+0x100/0x1f0 [nouveau]
[ 9.853775] Modules linked in: rfcomm hid_generic usbhid hid cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel acpi_call(OE) bluetooth ecdh_generic ecc joydev mousedev intel_rapl_msr iptable_filter intel_rapl_common xt_MASQUERADE iptable_nat nf_nat xt_tcpudp xt_mark xt_owner xt_connmark nf_conntrack x86_pkg_temp_thermal nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c intel_powerclamp iptable_mangle snd_hda_codec_conexant kvm_intel snd_hda_codec_generic kvm rtl8192ce irqbypass i915 nouveau rtl_pci rtl8192c_common rtlwifi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi mac80211 mei_wdt mxm_wmi iTCO_wdt wmi_bmof aesni_intel iTCO_vendor_support mei_hdcp ttm snd_hda_intel i2c_algo_bit crypto_simd snd_intel_dspcfg cfg80211 cryptd drm_kms_helper snd_hda_codec glue_helper intel_cstate intel_uncore snd_hda_core intel_rapl_perf thinkpad_acpi mei_me snd_hwdep cec intel_gtt nvram psmouse ledtrig_audio rc_core snd_pcm tpm_tis syscopyarea e1000e sysfillrect snd_timer
[ 9.853853] RIP: 0010:nv50_disp_super_2_2+0x190/0x450 [nouveau]
[ 11.847238] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 13.847269] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 16.014363] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 18.014390] nouveau 0000:01:00.0: DRM: base-1: timeout
[ 20.624302] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 22.625207] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 24.769813] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 26.769844] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 28.785933] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 30.785961] nouveau 0000:01:00.0: DRM: base-1: timeout
[ 32.934874] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 34.937301] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 37.020825] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 37.023242] nouveau 0000:01:00.0: DRM: base-1: timeout
[ 39.071060] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 41.105754] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 41.107965] nouveau 0000:01:00.0: DRM: base-1: timeout
[ 43.141843] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 43.146992] nouveau 0000:01:00.0: DRM: base-1: timeout
[ 45.177645] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 45.179776] nouveau 0000:01:00.0: DRM: base-1: timeout
[ 53.020215] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 53.022499] nouveau 0000:01:00.0: DRM: base-1: timeout
[ 55.055297] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 55.057488] nouveau 0000:01:00.0: DRM: base-1: timeout
[ 57.056766] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 59.057536] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 82.108824] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 84.108853] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 86.110098] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 88.233687] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 90.233717] nouveau 0000:01:00.0: DRM: base-0: timeout
[ 92.234939] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 94.237047] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 96.237075] nouveau 0000:01:00.0: DRM: base-1: timeout
[ 98.238483] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 444.131395] nouveau: evo channel stalledOffline
So I booted my laptop with Windows instead, and both external monitors were booting correctly.
Now, in archlinux, the symptoms have changed: one monitor still has no signal, the other now has a valid signal which is just a grey screen.
Offline
I had a similar issue. I updated last night and my external displays stopped working. This morning I did an update again via pacman, and when I rebooted the screens worked again,m the update did install a new nvidia version. That said it has broken my displayport audio.
Offline
My Issues might be weirder than that.
I have done a complete downgrade of my system to the previous kernel version using the ALA (2020/04/24).
Now one external monitor is getting a signal, but it's all messed up.
Offline
So downgrading to linux 5.6.5 (ALA 2020/04/20) has fixed the problem.
linux 5.6.6 (2020/04/24) showed some interesting behaviour, namely the framebuffer of another screen (that wasn't producing output) and of PRIME offload rendering being shown on one display (sometimes).
Does anyone know where I can report this as a bug (because I'm not sure where it would have occurred, xorg, nouveau or linux)?
Offline
If changing just the linux package triggers the issue I would expect the cause to be a change between the two kernel versions.
The only nouveau changed that I could see in 5.6.6 is https://git.kernel.org/pub/scm/linux/ke … f0144027bc
Is the issue still present in linux 5.6.7.arch1-1? If it is please post the full kernel messages for both a good and bad boot.
Offline
After switching to linux-lts (5.4.35), the issue also occurs.
So upgrading linux was not the issue..
Pacman log of the relevant update:
[2020-04-28T11:10:47+0200] [PACMAN] Running 'pacman -S -y -u --config /etc/pacman.conf --'
[2020-04-28T11:10:47+0200] [PACMAN] synchronizing package lists
[2020-04-28T11:10:47+0200] [PACMAN] starting full system upgrade
[2020-04-28T11:11:19+0200] [ALPM] running '60-mkinitcpio-remove.hook'...
[2020-04-28T11:11:19+0200] [ALPM] transaction started
[2020-04-28T11:11:20+0200] [ALPM] upgraded tzdata (2019c-3 -> 2020a-1)
[2020-04-28T11:11:20+0200] [ALPM] upgraded iana-etc (20200327-1 -> 20200401-1)
[2020-04-28T11:11:20+0200] [ALPM] upgraded openssl (1.1.1.f-1 -> 1.1.1.g-1)
[2020-04-28T11:11:20+0200] [ALPM] upgraded systemd-libs (245.5-1 -> 245.5-2)
[2020-04-28T11:11:20+0200] [ALPM] upgraded systemd (245.5-1 -> 245.5-2)
[2020-04-28T11:11:21+0200] [ALPM] upgraded gawk (5.0.1-2 -> 5.1.0-1)
[2020-04-28T11:11:25+0200] [ALPM] upgraded linux (5.6.5.arch3-1 -> 5.6.7.arch1-1)
[2020-04-28T11:11:25+0200] [ALPM] upgraded acpi_call (1.1.0-310 -> 1.1.0-312)
[2020-04-28T11:11:25+0200] [ALPM] upgraded archlinux-keyring (20200108-1 -> 20200422-1)
[2020-04-28T11:11:25+0200] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Locally signing key D8AFDDA07A5B6EDFA7D8CCDAD6D055F927843F1C...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Locally signing key DDB867B92AA789C165EEFA799B729B06A680C281...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Locally signing key 91FFE0700E80619CEB73235CA88E23E377514E00...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] ==> Importing owner trust values...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 50F33E2E5B0C3D900424ABE89BDCF497A4BBCC7F...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 39F880E50E49A4D11341E8F939E4F17F295AFBF4...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 8840BD07FC24CB7CE394A07CCF7037A4F27FB7DA...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 5559BC1A32B8F76B3FCCD9555FA5E5544F010D48...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 07DFD3A0BC213FA12EDC217559B3122E2FA915EC...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 4FCF887689C41B09506BE8D5F3E1D5C5D30DB0AD...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 5A2257D19FF7E1E0E415968CE62F853100F0D0F0...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key D921CABED130A5690EF1896E81AF739EC0711BF1...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 5696C003B0854206450C8E5BE613C09CB4440678...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 684148BB25B49E986A4944C55184252D824B18E8...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 8CF934E339CAD8ABF342E822E711306E3C4F88BC...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 5E7585ADFF106BFFBBA319DC654B877A0864983E...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 65EEFE022108E2B708CBFCF7F9E712E59AF5F22A...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 40440DC037C05620984379A6761FAD69BA06C6A9...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 34C5D94FE7E7913E86DC427E7FB1A3800C84C0A5...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 5357F3B111688D88C1D88119FCF2CB179205AC90...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 4D913AECD81726D9A6C74F0ADA6426DD215B37AD...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key FB871F0131FEA4FB5A9192B4C8880A6406361833...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key B1F2C889CB2CCB2ADA36D963097D629E437520BD...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 9515D8A8EAB88E49BB65EDBCE6B456CAF15447D5...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 76B4192E902C0A52642C63C273B8ED52F1D357C1...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 40776A5221EF5AD468A4906D42A1DB15EC133BAD...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key D4DE5ABDE2A7287644EAC7E36D1A9E70E19DAA50...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] -> Disabling key 44D4A033AC140143927397D47EFD567D4C7EA887...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] ==> Updating trust database...
[2020-04-28T11:11:28+0200] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2020-05-31
[2020-04-28T11:11:29+0200] [ALPM] upgraded bbswitch (0.8-311 -> 0.8-313)
[2020-04-28T11:11:29+0200] [ALPM] upgraded xorgproto (2019.2-2 -> 2020.1-1)
[2020-04-28T11:11:29+0200] [ALPM] upgraded pixman (0.38.4-1 -> 0.40.0-1)
[2020-04-28T11:11:29+0200] [ALPM] upgraded librsvg (2:2.48.3-1 -> 2:2.48.4-1)
[2020-04-28T11:11:29+0200] [ALPM] upgraded mesa (20.0.4-2 -> 20.0.5-1)
[2020-04-28T11:11:29+0200] [ALPM] upgraded libcups (2.3.1-1 -> 2.3.3-1)
[2020-04-28T11:11:29+0200] [ALPM] upgraded gtk-update-icon-cache (1:3.24.18-1 -> 1:3.24.20-1)
[2020-04-28T11:11:30+0200] [ALPM] upgraded gtk3 (1:3.24.18-1 -> 1:3.24.20-1)
[2020-04-28T11:11:30+0200] [ALPM] upgraded bleachbit (4.0.0-1 -> 4.0.0-2)
[2020-04-28T11:11:30+0200] [ALPM] upgraded libmfx (20.1.0-1 -> 20.1.1-1)
[2020-04-28T11:11:30+0200] [ALPM] upgraded ffmpeg (1:4.2.2-5 -> 1:4.2.2-6)
[2020-04-28T11:11:31+0200] [ALPM] upgraded chromium (81.0.4044.113-1 -> 81.0.4044.122-1)
[2020-04-28T11:11:31+0200] [ALPM] upgraded imagemagick (7.0.10.6-1 -> 7.0.10.9-1)
[2020-04-28T11:11:31+0200] [ALPM] upgraded cups (2.3.1-1 -> 2.3.3-1)
[2020-04-28T11:11:31+0200] [ALPM] upgraded cython (0.29.16-1 -> 0.29.17-1)
[2020-04-28T11:11:32+0200] [ALPM] upgraded python2 (2.7.17-3 -> 2.7.18-1)
[2020-04-28T11:11:32+0200] [ALPM] upgraded cython2 (0.29.16-1 -> 0.29.17-1)
[2020-04-28T11:11:32+0200] [ALPM] upgraded dhcpcd (9.0.1-2 -> 9.0.2-1)
[2020-04-28T11:11:33+0200] [ALPM] upgraded discord (0.0.10-2 -> 0.0.10-3)
[2020-04-28T11:11:33+0200] [ALPM] upgraded eog (3.36.1-1 -> 3.36.2-1)
[2020-04-28T11:11:34+0200] [ALPM] upgraded webkit2gtk (2.28.1-1 -> 2.28.2-1)
[2020-04-28T11:11:34+0200] [ALPM] upgraded evolution-data-server (3.36.1-1 -> 3.36.2-1)
[2020-04-28T11:11:35+0200] [ALPM] upgraded evolution (3.36.1-1 -> 3.36.2-1)
[2020-04-28T11:11:35+0200] [ALPM] upgraded evolution-spamassassin (3.36.1-1 -> 3.36.2-1)
[2020-04-28T11:11:35+0200] [ALPM] upgraded hdf5 (1.10.5-1 -> 1.12.0-2)
[2020-04-28T11:11:35+0200] [ALPM] upgraded netcdf (4.7.3-1 -> 4.7.4-1)
[2020-04-28T11:11:35+0200] [ALPM] upgraded gdal (3.0.4-5 -> 3.0.4-6)
[2020-04-28T11:11:35+0200] [ALPM] upgraded uchardet (0.0.6-2 -> 0.0.7-1)
[2020-04-28T11:11:36+0200] [ALPM] upgraded gedit (3.36.1-1 -> 3.36.2-1)
[2020-04-28T11:11:36+0200] [ALPM] upgraded gettext (0.20.1-3 -> 0.20.2-1)
[2020-04-28T11:11:38+0200] [ALPM] upgraded gimp (2.10.18-5 -> 2.10.18-6)
[2020-04-28T11:11:38+0200] [ALPM] upgraded git (2.26.1-1 -> 2.26.2-1)
[2020-04-28T11:11:38+0200] [ALPM] upgraded glew (2.1.0-1 -> 2.2.0-2)
[2020-04-28T11:11:38+0200] [ALPM] upgraded vte-common (0.60.1-1 -> 0.60.2-1)
[2020-04-28T11:11:39+0200] [ALPM] upgraded vte3 (0.60.1-1 -> 0.60.2-1)
[2020-04-28T11:11:39+0200] [ALPM] upgraded gnome-terminal (3.36.1.1-1 -> 3.36.2-1)
[2020-04-28T11:11:41+0200] [ALPM] upgraded gnome-user-docs (3.36.1-1 -> 3.36.2-1)
[2020-04-28T11:11:41+0200] [ALPM] upgraded graphviz (2.42.3-3 -> 2.44.0-1)
[2020-04-28T11:11:41+0200] [ALPM] upgraded gst-plugins-bad-libs (1.16.2-7 -> 1.16.2-8)
[2020-04-28T11:11:41+0200] [ALPM] upgraded serd (0.30.2-1 -> 0.30.4-1)
[2020-04-28T11:11:41+0200] [ALPM] upgraded lilv (0.24.6-2 -> 0.24.8-1)
[2020-04-28T11:11:42+0200] [ALPM] upgraded neon (0.31.0-1 -> 0.31.1-1)
[2020-04-28T11:11:42+0200] [ALPM] upgraded gst-plugins-bad (1.16.2-7 -> 1.16.2-8)
[2020-04-28T11:11:42+0200] [ALPM] upgraded vim-runtime (8.2.0510-1 -> 8.2.0510-2)
[2020-04-28T11:11:42+0200] [ALPM] upgraded gvim (8.2.0510-1 -> 8.2.0510-2)
[2020-04-28T11:11:42+0200] [ALPM] upgraded i3-gaps (4.18-1 -> 4.18.1-1)
[2020-04-28T11:11:42+0200] [ALPM] upgraded intel-media-sdk (20.1.0-1 -> 20.1.1-1)
[2020-04-28T11:11:42+0200] [ALPM] upgraded signon-kwallet-extension (19.12.3-1 -> 20.04.0-1)
[2020-04-28T11:11:42+0200] [ALPM] upgraded kaccounts-integration (19.12.3-1 -> 20.04.0-1)
[2020-04-28T11:11:42+0200] [ALPM] upgraded kdeconnect (1.4-2 -> 20.04.0-1)
[2020-04-28T11:11:42+0200] [ALPM] upgraded libkexiv2 (19.12.3-1 -> 20.04.0-1)
[2020-04-28T11:11:42+0200] [ALPM] upgraded libmagick6 (6.9.11.6-1 -> 6.9.11.9-1)
[2020-04-28T11:11:42+0200] [ALPM] upgraded libnautilus-extension (3.36.1.1-1 -> 3.36.2-1)
[2020-04-28T11:11:44+0200] [ALPM] upgraded linux-firmware (20200316.8eb0b28-1 -> 20200421.78c0348-1)
[2020-04-28T11:11:52+0200] [ALPM] upgraded linux-headers (5.6.5.arch3-1 -> 5.6.7.arch1-1)
[2020-04-28T11:11:52+0200] [ALPM] upgraded lv2 (1.16.0-4 -> 1.18.0-1)
[2020-04-28T11:11:52+0200] [ALPM] upgraded mesa-demos (8.4.0-3 -> 8.4.0-4)
[2020-04-28T11:11:52+0200] [ALPM] upgraded meson (0.54.0-2 -> 0.54.1-1)
[2020-04-28T11:11:52+0200] [ALPM] upgraded zziplib (0.13.70-2 -> 0.13.71-1)
[2020-04-28T11:11:52+0200] [ALPM] upgraded mpd (0.21.22-1 -> 0.21.23-3)
[2020-04-28T11:11:52+0200] [ALPM] upgraded msmtp (1.8.8-1 -> 1.8.10-1)
[2020-04-28T11:11:52+0200] [ALPM] upgraded msmtp-mta (1.8.8-1 -> 1.8.10-1)
[2020-04-28T11:11:52+0200] [ALPM] upgraded nautilus (3.36.1.1-1 -> 3.36.2-1)
[2020-04-28T11:11:52+0200] [ALPM] upgraded neomutt (20200417-1 -> 20200424-1)
[2020-04-28T11:11:52+0200] [ALPM] upgraded nginx (1.16.1-2 -> 1.18.0-1)
[2020-04-28T11:11:53+0200] [ALPM] upgraded okular (19.12.3-3 -> 20.04.0-1)
[2020-04-28T11:11:53+0200] [ALPM] upgraded opencl-mesa (20.0.4-2 -> 20.0.5-1)
[2020-04-28T11:11:53+0200] [ALPM] upgraded opencv (4.3.0-3 -> 4.3.0-4)
[2020-04-28T11:11:53+0200] [ALPM] upgraded openvpn (2.4.9-1 -> 2.4.9-2)
[2020-04-28T11:11:53+0200] [ALPM] upgraded perl-alien-libxml2 (0.15-1 -> 0.16-1)
[2020-04-28T11:11:53+0200] [ALPM] upgraded perl-clone (0.43-1 -> 0.44-1)
[2020-04-28T11:11:53+0200] [ALPM] upgraded perl-exporter-tiny (1.002001-3 -> 1.002002-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded prettier (2.0.4-1 -> 2.0.5-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python-shiboken2 (5.14.2-2 -> 5.14.2.1-2)
[2020-04-28T11:11:54+0200] [ALPM] upgraded pyside2 (5.14.2-1 -> 5.14.2.1-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded pyside2-tools (5.14.2-1 -> 5.14.2.1-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python-beautifulsoup4 (4.8.2-1 -> 4.9.0-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python-cryptography (2.8-2 -> 2.9.2-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python-distro (1.4.0-3 -> 1.5.0-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python-docutils (0.14-4 -> 0.16-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python-importlib-metadata (1.5.0-1 -> 1.5.1-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python-sphinx (3.0.1-1 -> 3.0.3-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python2-backports.functools_lru_cache (1.6.1-1 -> 1.6.1-2)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python2-cryptography (2.8-2 -> 2.9.2-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python2-distro (1.4.0-3 -> 1.5.0-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python2-docutils (0.14-4 -> 0.16-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python2-httplib2 (0.17.2-1 -> 0.17.3-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python2-scandir (1.10.0-2 -> 1.10.0-3)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python2-importlib-metadata (1.5.0-1 -> 1.5.1-1)
[2020-04-28T11:11:54+0200] [ALPM] upgraded python2-zope-interface (5.0.2-1 -> 5.1.0-1)
[2020-04-28T11:11:55+0200] [ALPM] upgraded python2-twisted (19.10.0-3 -> 20.3.0-1)
[2020-04-28T11:11:55+0200] [ALPM] upgraded python2-wcwidth (0.1.8-1 -> 0.1.9-1)
[2020-04-28T11:11:56+0200] [ALPM] upgraded rust (1:1.42.0-2 -> 1:1.43.0-2)
[2020-04-28T11:11:56+0200] [ALPM] upgraded s-nail (14.9.17-1 -> 14.9.18-1)
[2020-04-28T11:11:56+0200] [ALPM] upgraded semver (7.1.3-1 -> 7.3.2-1)
[2020-04-28T11:11:56+0200] [ALPM] upgraded shiboken2 (5.14.2-2 -> 5.14.2.1-2)
[2020-04-28T11:11:56+0200] [ALPM] upgraded spirv-tools (2019.5-2 -> 2020.2-1)
[2020-04-28T11:11:56+0200] [ALPM] upgraded sysstat (12.3.1-1 -> 12.3.2-1)
[2020-04-28T11:11:56+0200] [ALPM] upgraded systemd-sysvcompat (245.5-1 -> 245.5-2)
[2020-04-28T11:11:57+0200] [ALPM] upgraded telegram-desktop (2.0.1-1 -> 2.1.0-1)
[2020-04-28T11:11:57+0200] [ALPM] upgraded tmux (3.0_a-1 -> 3.1-1)
[2020-04-28T11:11:57+0200] [ALPM] upgraded tp_smapi (0.43-198 -> 0.43-200)
[2020-04-28T11:11:57+0200] [ALPM] upgraded tree (1.8.0-1 -> 1.8.0-2)
[2020-04-28T11:11:57+0200] [ALPM] upgraded unzip (6.0-13 -> 6.0-14)
[2020-04-28T11:11:57+0200] [ALPM] upgraded vala (0.48.3-1 -> 0.48.5-1)
[2020-04-28T11:11:57+0200] [ALPM] upgraded vigra (1.11.1-21 -> 1.11.1-22)
[2020-04-28T11:11:57+0200] [ALPM] upgraded virtualbox-host-modules-arch (6.1.6-4 -> 6.1.6-6)
[2020-04-28T11:11:58+0200] [ALPM] upgraded vlc (3.0.8-13 -> 3.0.9.2-2)
[2020-04-28T11:11:59+0200] [ALPM] upgraded vtk (8.2.0-10 -> 8.2.0-12)
[2020-04-28T11:11:59+0200] [ALPM] upgraded xapps (1.6.10-1 -> 1.8.1-1)
[2020-04-28T11:12:00+0200] [ALPM] upgraded xf86-video-intel (1:2.99.917+904+gf2853658-1 -> 1:2.99.917+906+g846b53da-1)
[2020-04-28T11:12:00+0200] [ALPM] upgraded xmlsec (1.2.29-1 -> 1.2.30-1)
[2020-04-28T11:12:00+0200] [ALPM] upgraded zip (3.0-8 -> 3.0-9)
[2020-04-28T11:12:00+0200] [ALPM] transaction completed
[2020-04-28T11:12:02+0200] [ALPM] running '20-systemd-sysusers.hook'...
[2020-04-28T11:12:02+0200] [ALPM] running '30-systemd-catalog.hook'...
[2020-04-28T11:12:02+0200] [ALPM] running '30-systemd-daemon-reload.hook'...
[2020-04-28T11:12:03+0200] [ALPM] running '30-systemd-hwdb.hook'...
[2020-04-28T11:12:03+0200] [ALPM] running '30-systemd-sysctl.hook'...
[2020-04-28T11:12:03+0200] [ALPM] running '30-systemd-tmpfiles.hook'...
[2020-04-28T11:12:03+0200] [ALPM] running '30-systemd-udev-reload.hook'...
[2020-04-28T11:12:03+0200] [ALPM] running '30-systemd-update.hook'...
[2020-04-28T11:12:03+0200] [ALPM] running '60-depmod.hook'...
[2020-04-28T11:12:11+0200] [ALPM] running '90-mkinitcpio-install.hook'...
[2020-04-28T11:12:11+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
[2020-04-28T11:12:11+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
[2020-04-28T11:12:11+0200] [ALPM-SCRIPTLET] ==> Starting build: 5.4.35-1-lts
[2020-04-28T11:12:11+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2020-04-28T11:12:11+0200] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2020-04-28T11:12:12+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2020-04-28T11:12:17+0200] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2020-04-28T11:12:17+0200] [ALPM-SCRIPTLET] findmnt: /etc/fstab: parse error at line 1 -- ignored
[2020-04-28T11:12:17+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2020-04-28T11:12:17+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2020-04-28T11:12:17+0200] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2020-04-28T11:12:17+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2020-04-28T11:12:18+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2020-04-28T11:12:18+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2020-04-28T11:12:19+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2020-04-28T11:12:19+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-lts.img
[2020-04-28T11:12:22+0200] [ALPM-SCRIPTLET] ==> Image generation successful
[2020-04-28T11:12:22+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
[2020-04-28T11:12:22+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
[2020-04-28T11:12:23+0200] [ALPM-SCRIPTLET] ==> Starting build: 5.4.35-1-lts
[2020-04-28T11:12:23+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2020-04-28T11:12:23+0200] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2020-04-28T11:12:23+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2020-04-28T11:12:28+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2020-04-28T11:12:28+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2020-04-28T11:12:29+0200] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2020-04-28T11:12:29+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2020-04-28T11:12:30+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2020-04-28T11:12:32+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2020-04-28T11:12:34+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2020-04-28T11:12:34+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-lts-fallback.img
[2020-04-28T11:12:40+0200] [ALPM-SCRIPTLET] ==> Image generation successful
[2020-04-28T11:12:40+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2020-04-28T11:12:40+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2020-04-28T11:12:40+0200] [ALPM-SCRIPTLET] ==> Starting build: 5.6.7-arch1-1
[2020-04-28T11:12:40+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2020-04-28T11:12:40+0200] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2020-04-28T11:12:40+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2020-04-28T11:12:46+0200] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2020-04-28T11:12:46+0200] [ALPM-SCRIPTLET] findmnt: /etc/fstab: parse error at line 1 -- ignored
[2020-04-28T11:12:46+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2020-04-28T11:12:46+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2020-04-28T11:12:48+0200] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2020-04-28T11:12:48+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2020-04-28T11:12:48+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2020-04-28T11:12:49+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2020-04-28T11:12:50+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2020-04-28T11:12:50+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
[2020-04-28T11:12:53+0200] [ALPM-SCRIPTLET] ==> Image generation successful
[2020-04-28T11:12:53+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2020-04-28T11:12:53+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2020-04-28T11:12:53+0200] [ALPM-SCRIPTLET] ==> Starting build: 5.6.7-arch1-1
[2020-04-28T11:12:53+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2020-04-28T11:12:54+0200] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2020-04-28T11:12:54+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2020-04-28T11:13:00+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2020-04-28T11:13:00+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2020-04-28T11:13:01+0200] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2020-04-28T11:13:01+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2020-04-28T11:13:03+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2020-04-28T11:13:05+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2020-04-28T11:13:07+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2020-04-28T11:13:07+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
[2020-04-28T11:13:12+0200] [ALPM-SCRIPTLET] ==> Image generation successful
[2020-04-28T11:13:12+0200] [ALPM] running 'dbus-reload.hook'...
[2020-04-28T11:13:13+0200] [ALPM] running 'detect-old-perl-modules.hook'...
[2020-04-28T11:13:13+0200] [ALPM-SCRIPTLET] WARNING: '/usr/lib/perl5/5.28' contains data from at least 1 packages which will NOT be used by the installed perl interpreter.
[2020-04-28T11:13:13+0200] [ALPM-SCRIPTLET] -> Run the following command to get a list of affected packages: pacman -Qqo '/usr/lib/perl5/5.28'
[2020-04-28T11:13:13+0200] [ALPM] running 'gdk-pixbuf-query-loaders.hook'...
[2020-04-28T11:13:13+0200] [ALPM] running 'glib-compile-schemas.hook'...
[2020-04-28T11:13:13+0200] [ALPM] running 'gtk-query-immodules-3.0.hook'...
[2020-04-28T11:13:13+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2020-04-28T11:13:13+0200] [ALPM] running 'texinfo-install.hook'...
[2020-04-28T11:13:14+0200] [ALPM] running 'update-desktop-database.hook'...
[2020-04-28T11:13:14+0200] [ALPM] running 'update-vlc-plugin-cache.hook'...
[2020-04-28T11:44:06+0200] [PACMAN] Running 'pacman -S -u -y --config /etc/pacman.conf --'
[2020-04-28T11:44:06+0200] [PACMAN] synchronizing package lists
[2020-04-28T11:44:07+0200] [PACMAN] starting full system upgrade
[2020-04-28T11:44:24+0200] [ALPM] transaction started
[2020-04-28T11:44:24+0200] [ALPM] upgraded chromium (81.0.4044.122-1 -> 81.0.4044.129-1)
[2020-04-28T11:44:24+0200] [ALPM] upgraded zbar (0.23-3 -> 0.23.1-1)
[2020-04-28T11:44:24+0200] [ALPM] transaction completed
[2020-04-28T11:44:24+0200] [ALPM] running '30-systemd-update.hook'...
[2020-04-28T11:44:25+0200] [ALPM] running 'dbus-reload.hook'...
[2020-04-28T11:44:25+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2020-04-28T11:44:25+0200] [ALPM] running 'update-desktop-database.hook'...
[2020-04-28T11:48:03+0200] [PACMAN] Running 'pacman -U --noconfirm --config /etc/pacman.conf -- /home/jonathan/.cache/yay/zoom/zoom-5.0.398100.0427-1-x86_64.pkg.tar.xz'
[2020-04-28T11:48:03+0200] [ALPM] transaction started
[2020-04-28T11:48:07+0200] [ALPM] upgraded zoom (3.5.392530.0421-1 -> 5.0.398100.0427-1)
[2020-04-28T11:48:07+0200] [ALPM] transaction completed
[2020-04-28T11:48:07+0200] [ALPM] running '30-systemd-update.hook'...
[2020-04-28T11:48:07+0200] [ALPM] running 'update-desktop-database.hook'...
[2020-04-28T11:48:07+0200] [ALPM] running 'update-mime-database.hook'...
[2020-04-28T12:02:38+0200] [PACMAN] Running 'pacman -U --noconfirm --config /etc/pacman.conf -- /home/jonathan/.cache/yay/med/med-4.0.0-6-x86_64.pkg.tar.xz'
[2020-04-28T12:02:38+0200] [ALPM] transaction started
[2020-04-28T12:02:39+0200] [ALPM] upgraded med (4.0.0-5 -> 4.0.0-6)
[2020-04-28T12:02:39+0200] [ALPM] transaction completed
[2020-04-28T12:02:39+0200] [ALPM] running '30-systemd-update.hook'...journalctl since lst boot:
https://pastebin.com/MYBiyxxZ
dmesg:
https://pastebin.com/bXHBhNRy
xorg:
https://pastebin.com/nh8jYvix
xorg of working boot:
https://pastebin.com/ubGSXSkY
Last edited by underscore_j (2020-04-29 11:03:11)
Offline
I don't want to hijack this but I suspect I am suffering from a similar problem, albeit not on arch linux but on debian unstable. Finding this thread gave me some hope. My kernel upgrade to 5.6.7 produces the no-signal behavior on my monitor even though xrandr pretends everything is fine (display is active, using the right modeline, etc.). The problem only appears once the nouveau module is loaded and also blocks me from using my ttys, which suffer from the same no-signal issue as soon as I load the module.
Sadly, switching to 5.6.5 did not fix the issue for me.
However, while trying to get the log for a "bad boot" I just managed to boot into 5.6.7 without any issues. So the problem is not consistent. I probably rebooted the machine about 40 times during my last debugging session and didn't manage to get the monitor output working even a single time, neither with 5.6.7 nor with 5.6.5.
Of course, restarting the machine brings back the problem.
Here's a "bad" boot log:
[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13
[ 0.000000] Linux version 5.6.7-towo.1-siduction-amd64 (towo@siduction.org) (gcc version 9.3.0 (Debian 9.3.0-10)) #1 SMP PREEMPT siduction 5.6-7 (2020-04-23)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.6.7-towo.1-siduction-amd64 root=/dev/mapper/desktop-base ro quiet systemd.show_status=1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ddddbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddddc000-0x00000000de035fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de036000-0x00000000de042fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000de043000-0x00000000de0bbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de0bc000-0x00000000de0c1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000de0c2000-0x00000000de146fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de147000-0x00000000de1e1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de1e2000-0x00000000de989fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de98a000-0x00000000dea12fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000dea13000-0x00000000dea13fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dea14000-0x00000000dea56fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dea57000-0x00000000df45ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df460000-0x00000000df7d6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7d7000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xde036000 ACPI 2.0=0xde036000 SMBIOS=0xf04c0 MPS=0xfd440
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77X-UD3H, BIOS F20e 01/06/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3202.904 MHz processor
[ 0.001541] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001542] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001547] last_pfn = 0x81f000 max_arch_pfn = 0x400000000
[ 0.001550] MTRR default type: uncachable
[ 0.001551] MTRR fixed ranges enabled:
[ 0.001552] 00000-9FFFF write-back
[ 0.001552] A0000-BFFFF uncachable
[ 0.001553] C0000-CFFFF write-protect
[ 0.001553] D0000-DFFFF uncachable
[ 0.001554] E0000-FFFFF write-protect
[ 0.001554] MTRR variable ranges enabled:
[ 0.001555] 0 base 000000000 mask 800000000 write-back
[ 0.001556] 1 base 800000000 mask FF0000000 write-back
[ 0.001557] 2 base 810000000 mask FF8000000 write-back
[ 0.001557] 3 base 818000000 mask FFC000000 write-back
[ 0.001558] 4 base 81C000000 mask FFE000000 write-back
[ 0.001558] 5 base 81E000000 mask FFF000000 write-back
[ 0.001559] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.001559] 7 disabled
[ 0.001560] 8 disabled
[ 0.001560] 9 disabled
[ 0.001811] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001945] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.001947] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.011072] found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef]
[ 0.011101] BRK [0x02c01000, 0x02c01fff] PGTABLE
[ 0.011102] BRK [0x02c02000, 0x02c02fff] PGTABLE
[ 0.011103] BRK [0x02c03000, 0x02c03fff] PGTABLE
[ 0.011142] BRK [0x02c04000, 0x02c04fff] PGTABLE
[ 0.011233] BRK [0x02c05000, 0x02c05fff] PGTABLE
[ 0.011440] BRK [0x02c06000, 0x02c06fff] PGTABLE
[ 0.012135] Secure boot could not be determined
[ 0.012136] RAMDISK: [mem 0x31215000-0x34901fff]
[ 0.012142] ACPI: Early table checksum verification disabled
[ 0.012144] ACPI: RSDP 0x00000000DE036000 000024 (v02 ALASKA)
[ 0.012147] ACPI: XSDT 0x00000000DE036070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.012151] ACPI: FACP 0x00000000DE040AE0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.012155] ACPI: DSDT 0x00000000DE036168 00A971 (v02 ALASKA A M I 00000012 INTL 20051117)
[ 0.012158] ACPI: FACS 0x00000000DE1E0F80 000040
[ 0.012160] ACPI: APIC 0x00000000DE040BD8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.012162] ACPI: MCFG 0x00000000DE040C50 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.012164] ACPI: HPET 0x00000000DE040C90 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.012166] ACPI: SSDT 0x00000000DE040CC8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.012169] ACPI: SSDT 0x00000000DE041038 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.012171] ACPI: SSDT 0x00000000DE0419E8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.012173] ACPI: DMAR 0x00000000DE042480 000080 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.012181] ACPI: Local APIC address 0xfee00000
[ 0.012248] No NUMA configuration found
[ 0.012249] Faking a node at [mem 0x0000000000000000-0x000000081effffff]
[ 0.012252] NODE_DATA(0) allocated [mem 0x81efdc000-0x81efddfff]
[ 0.012284] Zone ranges:
[ 0.012285] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012286] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012287] Normal [mem 0x0000000100000000-0x000000081effffff]
[ 0.012287] Movable zone start for each node
[ 0.012288] Early memory node ranges
[ 0.012288] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.012289] node 0: [mem 0x0000000000100000-0x00000000ddddbfff]
[ 0.012290] node 0: [mem 0x00000000de0c2000-0x00000000de146fff]
[ 0.012290] node 0: [mem 0x00000000dea13000-0x00000000dea13fff]
[ 0.012291] node 0: [mem 0x00000000dea57000-0x00000000df45ffff]
[ 0.012291] node 0: [mem 0x00000000df7d7000-0x00000000df7fffff]
[ 0.012292] node 0: [mem 0x0000000100000000-0x000000081effffff]
[ 0.012369] Zeroed struct page in unavailable ranges: 10190 pages
[ 0.012370] Initmem setup node 0 [mem 0x0000000000001000-0x000000081effffff]
[ 0.012372] On node 0 totalpages: 8378418
[ 0.012372] DMA zone: 64 pages used for memmap
[ 0.012373] DMA zone: 27 pages reserved
[ 0.012374] DMA zone: 3998 pages, LIFO batch:0
[ 0.012419] DMA32 zone: 14179 pages used for memmap
[ 0.012420] DMA32 zone: 907412 pages, LIFO batch:63
[ 0.022950] Normal zone: 116672 pages used for memmap
[ 0.022951] Normal zone: 7467008 pages, LIFO batch:63
[ 0.108222] ACPI: PM-Timer IO Port: 0x408
[ 0.108224] ACPI: Local APIC address 0xfee00000
[ 0.108230] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.108240] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.108242] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.108243] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.108244] ACPI: IRQ0 used by override.
[ 0.108245] ACPI: IRQ9 used by override.
[ 0.108246] Using ACPI (MADT) for SMP configuration information
[ 0.108247] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.108252] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.108275] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.108276] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.108277] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.108278] PM: hibernation: Registered nosave memory: [mem 0xddddc000-0xde035fff]
[ 0.108279] PM: hibernation: Registered nosave memory: [mem 0xde036000-0xde042fff]
[ 0.108279] PM: hibernation: Registered nosave memory: [mem 0xde043000-0xde0bbfff]
[ 0.108280] PM: hibernation: Registered nosave memory: [mem 0xde0bc000-0xde0c1fff]
[ 0.108281] PM: hibernation: Registered nosave memory: [mem 0xde147000-0xde1e1fff]
[ 0.108282] PM: hibernation: Registered nosave memory: [mem 0xde1e2000-0xde989fff]
[ 0.108282] PM: hibernation: Registered nosave memory: [mem 0xde98a000-0xdea12fff]
[ 0.108283] PM: hibernation: Registered nosave memory: [mem 0xdea14000-0xdea56fff]
[ 0.108285] PM: hibernation: Registered nosave memory: [mem 0xdf460000-0xdf7d6fff]
[ 0.108286] PM: hibernation: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.108287] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.108287] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.108288] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.108288] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.108288] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.108289] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.108289] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.108290] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.108290] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.108291] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.108291] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.108293] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.108295] Booting paravirtualized kernel on bare hardware
[ 0.108297] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.112512] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.112668] percpu: Embedded 54 pages/cpu s182552 r8192 d30440 u524288
[ 0.112674] pcpu-alloc: s182552 r8192 d30440 u524288 alloc=1*2097152
[ 0.112675] pcpu-alloc: [0] 0 1 2 3
[ 0.112696] Built 1 zonelists, mobility grouping on. Total pages: 8247476
[ 0.112696] Policy zone: Normal
[ 0.112697] Kernel command line: BOOT_IMAGE=/vmlinuz-5.6.7-towo.1-siduction-amd64 root=/dev/mapper/desktop-base ro quiet systemd.show_status=1
[ 0.114338] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.115146] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.115195] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.197550] Memory: 32578040K/33513672K available (14340K kernel code, 1540K rwdata, 3980K rodata, 1468K init, 880K bss, 935632K reserved, 0K cma-reserved)
[ 0.197587] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.197594] Kernel/User page tables isolation: enabled
[ 0.197606] ftrace: allocating 42168 entries in 165 pages
[ 0.210051] ftrace: allocated 165 pages with 4 groups
[ 0.210108] rcu: Preemptible hierarchical RCU implementation.
[ 0.210109] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.210109] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.210110] Tasks RCU enabled.
[ 0.210111] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.210111] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.210255] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.210409] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.210453] random: crng done (trusting CPU's manufacturer)
[ 0.210470] Console: colour dummy device 80x25
[ 0.210473] printk: console [tty0] enabled
[ 0.210483] ACPI: Core revision 20200110
[ 0.210554] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.210564] APIC: Switch to symmetric I/O mode setup
[ 0.210565] DMAR: Host address width 36
[ 0.210566] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.210570] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.210571] DMAR: RMRR base: 0x000000de043000 end: 0x000000de04ffff
[ 0.210572] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.210573] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.210574] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.210804] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.210805] x2apic enabled
[ 0.210811] Switched APIC routing to cluster x2apic.
[ 0.211216] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.215566] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e2b01c8369, max_idle_ns: 440795348639 ns
[ 0.215570] Calibrating delay loop (skipped), value calculated using timer frequency.. 6405.80 BogoMIPS (lpj=3202904)
[ 0.215571] pid_max: default: 32768 minimum: 301
[ 0.220584] LSM: Security Framework initializing
[ 0.220587] Yama: becoming mindful.
[ 0.220601] AppArmor: AppArmor initialized
[ 0.220659] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.220716] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.220725] *** VALIDATE tmpfs ***
[ 0.220832] *** VALIDATE proc ***
[ 0.220871] *** VALIDATE cgroup ***
[ 0.220872] *** VALIDATE cgroup2 ***
[ 0.220895] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.220910] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.220920] process: using mwait in idle threads
[ 0.220922] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.220923] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.220925] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.220926] Spectre V2 : Mitigation: Full generic retpoline
[ 0.220926] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.220927] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.220928] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.220929] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.220931] MDS: Mitigation: Clear CPU buffers
[ 0.221068] Freeing SMP alternatives memory: 44K
[ 0.221627] TSC deadline timer enabled
[ 0.221629] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1225 V2 @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.227578] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.227588] ... version: 3
[ 0.227589] ... bit width: 48
[ 0.227589] ... generic registers: 8
[ 0.227591] ... value mask: 0000ffffffffffff
[ 0.227591] ... max period: 00007fffffffffff
[ 0.227592] ... fixed-purpose events: 3
[ 0.227593] ... event mask: 00000007000000ff
[ 0.229572] rcu: Hierarchical SRCU implementation.
[ 0.231783] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.233576] smp: Bringing up secondary CPUs ...
[ 0.241585] x86: Booting SMP configuration:
[ 0.241586] .... node #0, CPUs: #1 #2 #3
[ 0.261615] smp: Brought up 1 node, 4 CPUs
[ 0.261615] smpboot: Max logical packages: 1
[ 0.261615] smpboot: Total of 4 processors activated (25623.23 BogoMIPS)
[ 0.262753] devtmpfs: initialized
[ 0.262753] PM: Registering ACPI NVS region [mem 0xde147000-0xde1e1fff] (634880 bytes)
[ 0.262753] PM: Registering ACPI NVS region [mem 0xdea14000-0xdea56fff] (274432 bytes)
[ 0.262753] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.262753] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.262753] xor: automatically using best checksumming function avx
[ 0.262753] pinctrl core: initialized pinctrl subsystem
[ 0.262753] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.262753] thermal_sys: Registered thermal governor 'step_wise'
[ 0.262753] thermal_sys: Registered thermal governor 'user_space'
[ 0.262755] NET: Registered protocol family 16
[ 0.262822] audit: initializing netlink subsys (disabled)
[ 0.262827] audit: type=2000 audit(1588157615.052:1): state=initialized audit_enabled=0 res=1
[ 0.262827] cpuidle: using governor ladder
[ 0.262827] cpuidle: using governor menu
[ 0.262827] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.262827] ACPI: bus type PCI registered
[ 0.262827] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.262827] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.262827] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.262827] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.262827] PCI: Using configuration type 1 for base access
[ 0.263571] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.263652] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.264376] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.264598] cryptd: max_cpu_qlen set to 1000
[ 0.282569] raid6: sse2x4 gen() 16234 MB/s
[ 0.299569] raid6: sse2x4 xor() 8678 MB/s
[ 0.316570] raid6: sse2x2 gen() 16533 MB/s
[ 0.333569] raid6: sse2x2 xor() 9094 MB/s
[ 0.350570] raid6: sse2x1 gen() 13661 MB/s
[ 0.367569] raid6: sse2x1 xor() 7928 MB/s
[ 0.367570] raid6: using algorithm sse2x2 gen() 16533 MB/s
[ 0.367570] raid6: .... xor() 9094 MB/s, rmw enabled
[ 0.367571] raid6: using ssse3x2 recovery algorithm
[ 0.367603] ACPI: Added _OSI(Module Device)
[ 0.367603] ACPI: Added _OSI(Processor Device)
[ 0.367604] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.367605] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.367606] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.367606] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.367607] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.371692] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.372825] ACPI: Dynamic OEM Table Load:
[ 0.372829] ACPI: SSDT 0xFFFF8887FB09D000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.373374] ACPI: Dynamic OEM Table Load:
[ 0.373377] ACPI: SSDT 0xFFFF8887FB3A2C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.373826] ACPI: Dynamic OEM Table Load:
[ 0.373828] ACPI: SSDT 0xFFFF8887FADD0400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.374733] ACPI: Interpreter enabled
[ 0.374748] ACPI: (supports S0 S3 S4 S5)
[ 0.374749] ACPI: Using IOAPIC for interrupt routing
[ 0.374767] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.374952] ACPI: Enabled 15 GPEs in block 00 to 3F
[ 0.380170] ACPI: Power Resource [FN00] (off)
[ 0.380228] ACPI: Power Resource [FN01] (off)
[ 0.380286] ACPI: Power Resource [FN02] (off)
[ 0.380342] ACPI: Power Resource [FN03] (off)
[ 0.380399] ACPI: Power Resource [FN04] (off)
[ 0.380818] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.380822] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.380983] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.381078] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.381079] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.381408] PCI host bridge to bus 0000:00
[ 0.381410] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.381411] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.381412] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.381413] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.381414] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.381415] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.381416] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.381416] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.381418] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.381425] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
[ 0.381503] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.381536] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.381635] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.381658] pci 0000:00:14.0: reg 0x10: [mem 0xf7400000-0xf740ffff 64bit]
[ 0.381724] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.381800] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.381823] pci 0000:00:16.0: reg 0x10: [mem 0xf741a000-0xf741a00f 64bit]
[ 0.381893] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.381966] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.381986] pci 0000:00:1a.0: reg 0x10: [mem 0xf7418000-0xf74183ff]
[ 0.382065] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.382143] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.382161] pci 0000:00:1b.0: reg 0x10: [mem 0xf7410000-0xf7413fff 64bit]
[ 0.382223] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.382303] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.382393] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.382412] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.382414] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.382490] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.382580] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.382598] pci 0000:00:1c.4: Enabling MPC IRBNCE
[ 0.382600] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[ 0.382673] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[ 0.382763] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.382847] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
[ 0.382936] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.382954] pci 0000:00:1c.6: Enabling MPC IRBNCE
[ 0.382956] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled
[ 0.383027] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[ 0.383117] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.383134] pci 0000:00:1c.7: Enabling MPC IRBNCE
[ 0.383136] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[ 0.383208] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.383228] pci 0000:00:1d.0: reg 0x10: [mem 0xf7417000-0xf74173ff]
[ 0.383308] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.383388] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[ 0.383557] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.383574] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.383580] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.383586] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.383592] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.383599] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.383605] pci 0000:00:1f.2: reg 0x24: [mem 0xf7416000-0xf74167ff]
[ 0.383642] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.383714] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.383730] pci 0000:00:1f.3: reg 0x10: [mem 0xf7415000-0xf74150ff 64bit]
[ 0.383749] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.383857] pci 0000:01:00.0: [10de:1c03] type 00 class 0x030000
[ 0.383873] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.383881] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.383890] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.383895] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.383901] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.383905] pci 0000:01:00.0: enabling Extended Tags
[ 0.383915] pci 0000:01:00.0: BAR 3: assigned to efifb
[ 0.383974] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.384006] pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
[ 0.384017] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.384041] pci 0000:01:00.1: enabling Extended Tags
[ 0.384127] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.384128] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.384130] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.384132] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.384172] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.384244] pci 0000:03:00.0: [1106:3432] type 00 class 0x0c0330
[ 0.384270] pci 0000:03:00.0: reg 0x10: [mem 0xf7300000-0xf7300fff]
[ 0.384407] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384497] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.384502] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.384564] pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
[ 0.384910] pci 0000:04:00.0: supports D1 D2
[ 0.384911] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384973] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.384982] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.384983] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.384984] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.384984] pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.384985] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.384986] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.384987] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.384988] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.385035] pci_bus 0000:05: extended config space not accessible
[ 0.385126] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.385151] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.385152] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.385153] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.385153] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.385154] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.385155] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.385156] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.385157] pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.385227] pci 0000:06:00.0: [1969:1083] type 00 class 0x020000
[ 0.385267] pci 0000:06:00.0: reg 0x10: [mem 0xf7200000-0xf723ffff 64bit]
[ 0.385280] pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.385423] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385529] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.385532] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.385534] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.385594] pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.385621] pci 0000:07:00.0: reg 0x10: [io 0xc040-0xc047]
[ 0.385632] pci 0000:07:00.0: reg 0x14: [io 0xc030-0xc033]
[ 0.385644] pci 0000:07:00.0: reg 0x18: [io 0xc020-0xc027]
[ 0.385655] pci 0000:07:00.0: reg 0x1c: [io 0xc010-0xc013]
[ 0.385666] pci 0000:07:00.0: reg 0x20: [io 0xc000-0xc00f]
[ 0.385678] pci 0000:07:00.0: reg 0x24: [mem 0xf7110000-0xf71101ff]
[ 0.385689] pci 0000:07:00.0: reg 0x30: [mem 0xf7100000-0xf710ffff pref]
[ 0.385712] pci 0000:07:00.0: Enabling fixed DMA alias to 00.1
[ 0.385763] pci 0000:07:00.0: PME# supported from D3hot
[ 0.385848] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.385851] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.385853] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.386216] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.386253] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.386289] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.386324] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.386358] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.386395] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.386430] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.386465] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.386685] iommu: Default domain type: Translated
[ 0.386694] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.386694] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.386694] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.386694] vgaarb: loaded
[ 0.386694] SCSI subsystem initialized
[ 0.386694] libata version 3.00 loaded.
[ 0.386694] ACPI: bus type USB registered
[ 0.386694] usbcore: registered new interface driver usbfs
[ 0.386694] usbcore: registered new interface driver hub
[ 0.386694] usbcore: registered new device driver usb
[ 0.386694] EDAC MC: Ver: 3.0.0
[ 0.386694] Registered efivars operations
[ 0.386694] PCI: Using ACPI for IRQ routing
[ 0.388373] PCI: pci_cache_line_size set to 64 bytes
[ 0.388426] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.388427] e820: reserve RAM buffer [mem 0xddddc000-0xdfffffff]
[ 0.388428] e820: reserve RAM buffer [mem 0xde147000-0xdfffffff]
[ 0.388429] e820: reserve RAM buffer [mem 0xdea14000-0xdfffffff]
[ 0.388430] e820: reserve RAM buffer [mem 0xdf460000-0xdfffffff]
[ 0.388431] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.388432] e820: reserve RAM buffer [mem 0x81f000000-0x81fffffff]
[ 0.388509] NetLabel: Initializing
[ 0.388509] NetLabel: domain hash size = 128
[ 0.388509] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.388519] NetLabel: unlabeled traffic allowed by default
[ 0.389000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.389002] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.390581] clocksource: Switched to clocksource tsc-early
[ 0.414010] *** VALIDATE bpf ***
[ 0.414071] VFS: Disk quotas dquot_6.6.0
[ 0.414083] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.414101] *** VALIDATE ramfs ***
[ 0.414104] *** VALIDATE hugetlbfs ***
[ 0.414161] AppArmor: AppArmor Filesystem Enabled
[ 0.414177] pnp: PnP ACPI init
[ 0.414247] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.414251] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.414315] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.414316] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.414317] system 00:01: [io 0xffff] has been reserved
[ 0.414318] system 00:01: [io 0xffff] has been reserved
[ 0.414319] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.414320] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.414321] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.414324] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414339] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.414380] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.414383] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.414479] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.414480] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.414481] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.414484] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414543] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.414546] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414720] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.414721] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.414722] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.414723] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.414724] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.414725] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.414726] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.414727] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.414729] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.414730] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.414731] system 00:06: [mem 0xf2000000-0xf2000fff] has been reserved
[ 0.414733] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414828] pnp: PnP ACPI: found 7 devices
[ 0.420228] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.420258] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.420260] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.420262] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.420263] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.420266] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.420276] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.420279] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.420286] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.420309] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[ 0.420318] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.420320] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.420324] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.420330] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.420332] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.420336] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.420343] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.420344] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.420345] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.420346] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.420347] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.420348] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.420349] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.420349] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[ 0.420350] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.420351] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.420352] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.420353] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
[ 0.420354] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.420355] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.420356] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.420357] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.420358] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.420359] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.420360] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.420360] pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff window]
[ 0.420361] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.420362] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.420363] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.420364] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.420365] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.420366] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.420366] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.420367] pci_bus 0000:05: resource 11 [mem 0xe0000000-0xfeafffff window]
[ 0.420368] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.420369] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.420370] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
[ 0.420371] pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.420446] NET: Registered protocol family 2
[ 0.420542] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.420576] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.420791] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.420900] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.420921] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.420977] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.421059] NET: Registered protocol family 1
[ 0.437677] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x621 took 16058 usecs
[ 0.454677] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x621 took 16584 usecs
[ 0.454694] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.454703] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.454851] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes
[ 0.454854] pci 0000:06:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.454887] Trying to unpack rootfs image as initramfs...
[ 1.083880] Freeing initrd memory: 56244K
[ 1.083908] DMAR: No ATSR found
[ 1.083935] DMAR: dmar0: Using Queued invalidation
[ 1.084064] pci 0000:00:00.0: Adding to iommu group 0
[ 1.084099] pci 0000:00:01.0: Adding to iommu group 1
[ 1.084150] pci 0000:00:14.0: Adding to iommu group 2
[ 1.084182] pci 0000:00:16.0: Adding to iommu group 3
[ 1.084234] pci 0000:00:1a.0: Adding to iommu group 4
[ 1.084262] pci 0000:00:1b.0: Adding to iommu group 5
[ 1.084295] pci 0000:00:1c.0: Adding to iommu group 6
[ 1.084325] pci 0000:00:1c.4: Adding to iommu group 7
[ 1.084364] pci 0000:00:1c.5: Adding to iommu group 8
[ 1.084395] pci 0000:00:1c.6: Adding to iommu group 9
[ 1.084433] pci 0000:00:1c.7: Adding to iommu group 10
[ 1.084482] pci 0000:00:1d.0: Adding to iommu group 11
[ 1.085709] pci 0000:00:1f.0: Adding to iommu group 12
[ 1.085719] pci 0000:00:1f.2: Adding to iommu group 12
[ 1.085727] pci 0000:00:1f.3: Adding to iommu group 12
[ 1.085736] pci 0000:01:00.0: Adding to iommu group 1
[ 1.085741] pci 0000:01:00.1: Adding to iommu group 1
[ 1.085777] pci 0000:03:00.0: Adding to iommu group 13
[ 1.085786] pci 0000:04:00.0: Adding to iommu group 8
[ 1.085817] pci 0000:06:00.0: Adding to iommu group 14
[ 1.085855] pci 0000:07:00.0: Adding to iommu group 15
[ 1.085857] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.087162] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 1.087163] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 1.087164] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 1.132284] AVX2 instructions are not detected.
[ 1.132527] Initialise system trusted keyrings
[ 1.132551] workingset: timestamp_bits=44 max_order=23 bucket_order=0
[ 1.133655] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 1.133846] *** VALIDATE xfs ***
[ 1.138361] NET: Registered protocol family 38
[ 1.138363] Key type asymmetric registered
[ 1.138364] Asymmetric key parser 'x509' registered
[ 1.138364] Asymmetric key parser 'pkcs8' registered
[ 1.138370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.138392] io scheduler mq-deadline registered
[ 1.138392] io scheduler kyber registered
[ 1.138408] io scheduler bfq registered
[ 1.139199] efifb: probing for efifb
[ 1.139213] efifb: framebuffer at 0xf1000000, using 5120k, total 5120k
[ 1.139214] efifb: mode is 1280x1024x32, linelength=5120, pages=1
[ 1.139214] efifb: scrolling: redraw
[ 1.139215] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.139278] Console: switching to colour frame buffer device 160x64
[ 1.141525] fb0: EFI VGA frame buffer device
[ 1.141531] intel_idle: MWAIT substates: 0x1120
[ 1.141531] intel_idle: v0.4.1 model 0x3A
[ 1.141648] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.141853] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.142240] Linux agpgart interface v0.103
[ 1.143774] brd: module loaded
[ 1.144441] loop: module loaded
[ 1.144679] i8042: PNP: No PS/2 controller found.
[ 1.144680] i8042: Probing ports directly.
[ 1.145071] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.145091] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.145137] mousedev: PS/2 mouse device common for all mice
[ 1.145172] rtc_cmos 00:02: RTC can wake from S4
[ 1.145328] rtc_cmos 00:02: registered as rtc0
[ 1.145340] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.145433] device-mapper: uevent: version 1.0.3
[ 1.145464] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 1.145532] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 1.145533] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 1.145534] device-mapper: multipath service-time: version 0.3.0 loaded
[ 1.145546] intel_pstate: Intel P-state driver initializing
[ 1.145766] EFI Variables Facility v0.08 2004-May-17
[ 1.174280] hid: raw HID events driver (C) Jiri Kosina
[ 1.174311] usbcore: registered new interface driver usbhid
[ 1.174311] usbhid: USB HID core driver
[ 1.174483] NET: Registered protocol family 10
[ 1.174654] Segment Routing with IPv6
[ 1.174667] mip6: Mobile IPv6
[ 1.174668] NET: Registered protocol family 17
[ 1.174732] Key type dns_resolver registered
[ 1.174922] microcode: sig=0x306a9, pf=0x2, revision=0x21
[ 1.174931] microcode: Microcode Update Driver: v2.2.
[ 1.174934] IPI shorthand broadcast: enabled
[ 1.174937] AVX version of gcm_enc/dec engaged.
[ 1.174938] AES CTR mode by8 optimization enabled
[ 1.189248] sched_clock: Marking stable (1189108816, 135030)->(1198063211, -8819365)
[ 1.189362] registered taskstats version 1
[ 1.189364] Loading compiled-in X.509 certificates
[ 1.189392] Key type ._fscrypt registered
[ 1.189392] Key type .fscrypt registered
[ 1.189393] Key type fscrypt-provisioning registered
[ 1.189530] Btrfs loaded, crc32c=crc32c-intel
[ 1.192779] Key type encrypted registered
[ 1.192782] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.192945] rtc_cmos 00:02: setting system clock to 2020-04-29T10:53:36 UTC (1588157616)
[ 1.193603] Freeing unused kernel image (initmem) memory: 1468K
[ 1.207610] Write protecting the kernel read-only data: 20480k
[ 1.208121] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.208188] Freeing unused kernel image (rodata/data gap) memory: 116K
[ 1.208199] rodata_test: all tests were successful
[ 1.208200] Run /init as init process
[ 1.208201] with arguments:
[ 1.208201] /init
[ 1.208201] with environment:
[ 1.208202] HOME=/
[ 1.208202] TERM=linux
[ 1.208202] BOOT_IMAGE=/vmlinuz-5.6.7-towo.1-siduction-amd64
[ 1.295993] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.305116] ACPI: Power Button [PWRB]
[ 1.305168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.306867] ACPI: Power Button [PWRF]
[ 1.311098] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.311099] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.311256] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.311282] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.311282] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.311404] ehci-pci: EHCI PCI platform driver
[ 1.311550] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.311554] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.311565] ehci-pci 0000:00:1a.0: debug port 2
[ 1.315490] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.315505] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7418000
[ 1.321330] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200110/utaddress-204)
[ 1.321334] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.321338] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[ 1.321341] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.321341] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[ 1.321343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.321343] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000051F (\LED) (20200110/utaddress-204)
[ 1.321348] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[ 1.321350] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.321351] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.321586] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.321627] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.321628] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.321631] usb usb1: Product: EHCI Host Controller
[ 1.321632] usb usb1: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 ehci_hcd
[ 1.321633] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.321710] hub 1-0:1.0: USB hub found
[ 1.321715] hub 1-0:1.0: 2 ports detected
[ 1.322038] ahci 0000:00:1f.2: version 3.0
[ 1.322191] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 1.322528] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.322881] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.322887] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.323952] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 1.323957] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.324064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.324065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.324066] usb usb2: Product: xHCI Host Controller
[ 1.324067] usb usb2: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 xhci-hcd
[ 1.324068] usb usb2: SerialNumber: 0000:00:14.0
[ 1.324197] hub 2-0:1.0: USB hub found
[ 1.324206] hub 2-0:1.0: 4 ports detected
[ 1.324446] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.324450] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.324463] ehci-pci 0000:00:1d.0: debug port 2
[ 1.324472] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.324474] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.324476] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.324504] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 1.324505] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.324505] usb usb4: Product: xHCI Host Controller
[ 1.324506] usb usb4: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 xhci-hcd
[ 1.324507] usb usb4: SerialNumber: 0000:00:14.0
[ 1.324590] hub 4-0:1.0: USB hub found
[ 1.324598] hub 4-0:1.0: 4 ports detected
[ 1.328378] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.328387] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7417000
[ 1.332758] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.332760] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.334596] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.334665] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.334666] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.334667] usb usb3: Product: EHCI Host Controller
[ 1.334668] usb usb3: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 ehci_hcd
[ 1.334669] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.334809] hub 3-0:1.0: USB hub found
[ 1.334815] hub 3-0:1.0: 2 ports detected
[ 1.334932] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.334937] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
[ 1.335047] xhci_hcd 0000:03:00.0: hcc params 0x002810eb hci version 0x96 quirks 0x0000000000080080
[ 1.335169] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.335170] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.335171] usb usb5: Product: xHCI Host Controller
[ 1.335171] usb usb5: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 xhci-hcd
[ 1.335172] usb usb5: SerialNumber: 0000:03:00.0
[ 1.335279] hub 5-0:1.0: USB hub found
[ 1.335287] hub 5-0:1.0: 1 port detected
[ 1.335367] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.335369] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
[ 1.335371] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[ 1.335384] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.335399] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 1.335400] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.335401] usb usb6: Product: xHCI Host Controller
[ 1.335401] usb usb6: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 xhci-hcd
[ 1.335402] usb usb6: SerialNumber: 0000:03:00.0
[ 1.335514] hub 6-0:1.0: USB hub found
[ 1.335525] hub 6-0:1.0: 4 ports detected
[ 1.343852] atl1c 0000:06:00.0: version 1.0.1.1-NAPI
[ 1.348268] scsi host0: ahci
[ 1.348389] scsi host1: ahci
[ 1.348456] scsi host2: ahci
[ 1.348513] scsi host3: ahci
[ 1.348566] scsi host4: ahci
[ 1.348639] scsi host5: ahci
[ 1.348678] ata1: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416100 irq 31
[ 1.348679] ata2: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416180 irq 31
[ 1.348681] ata3: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416200 irq 31
[ 1.348682] ata4: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416280 irq 31
[ 1.348683] ata5: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416300 irq 31
[ 1.348684] ata6: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416380 irq 31
[ 1.348850] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.348852] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.349018] scsi host6: ahci
[ 1.349091] scsi host7: ahci
[ 1.349123] ata7: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110100 irq 34
[ 1.349126] ata8: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110180 irq 34
[ 1.349236] atl1c 0000:06:00.0 enp6s0: renamed from eth0
[ 1.643620] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.643633] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.655392] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.655396] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.655423] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.655453] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.655482] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.655485] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.655502] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.655528] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.655705] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.655741] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.655844] ata1.00: supports DRM functions and may not be fully accessible
[ 1.655911] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.655946] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.656298] ata4.00: ATA-8: ST3000DM001-1CH166, CC43, max UDMA/133
[ 1.656301] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.656397] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.656432] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.656466] ata3.00: supports DRM functions and may not be fully accessible
[ 1.656486] ata3.00: ATA-10: CT2000MX500SSD1, M3CR023, max UDMA/133
[ 1.656487] ata3.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.656782] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.656816] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.657120] ata4.00: configured for UDMA/133
[ 1.657490] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.657562] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.657600] ata3.00: supports DRM functions and may not be fully accessible
[ 1.658178] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.658179] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.658337] ata3.00: configured for UDMA/133
[ 1.658374] hub 1-1:1.0: USB hub found
[ 1.658377] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.658421] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.658460] hub 1-1:1.0: 6 ports detected
[ 1.658536] ata5.00: HPA detected: current 488395055, native 488397168
[ 1.658601] ata5.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
[ 1.658603] ata5.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.660585] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.660600] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 1.661838] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.661896] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.662035] ata2.00: HPA detected: current 1953523055, native 1953525168
[ 1.662103] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 1.662105] ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.663144] ata1.00: disabling queued TRIM support
[ 1.663147] ata1.00: ATA-9: Samsung SSD 850 EVO 1TB, EMT02B6Q, max UDMA/133
[ 1.663149] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.668535] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.668590] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.668807] ata2.00: configured for UDMA/133
[ 1.670639] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.670693] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.670741] ata1.00: supports DRM functions and may not be fully accessible
[ 1.673919] usb 5-1: New USB device found, idVendor=2109, idProduct=0811, bcdDevice= 2.00
[ 1.673920] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.673921] usb 5-1: Product: USB2.0 Hub
[ 1.674316] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.674388] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.674719] ata5.00: configured for UDMA/133
[ 1.674900] hub 5-1:1.0: USB hub found
[ 1.675063] hub 5-1:1.0: 4 ports detected
[ 1.675085] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.675086] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.675246] hub 3-1:1.0: USB hub found
[ 1.675317] hub 3-1:1.0: 8 ports detected
[ 1.675800] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.675843] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.675980] ata6.00: HPA detected: current 976771055, native 976773168
[ 1.676042] ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
[ 1.676044] ata6.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.677854] ata1.00: disabling queued TRIM support
[ 1.677990] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.678034] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.678175] ata6.00: configured for UDMA/133
[ 1.685083] ata1.00: configured for UDMA/133
[ 1.685234] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 1.685426] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1113 PQ: 0 ANSI: 5
[ 1.685665] scsi 2:0:0:0: Direct-Access ATA CT2000MX500SSD1 023 PQ: 0 ANSI: 5
[ 1.685843] scsi 3:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC43 PQ: 0 ANSI: 5
[ 1.686030] scsi 4:0:0:0: Direct-Access ATA SAMSUNG SP2504C 0-41 PQ: 0 ANSI: 5
[ 1.686377] sd 1:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.686384] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.686385] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.686395] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.686413] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ 0-10 PQ: 0 ANSI: 5
[ 1.686415] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.686416] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.686423] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.686424] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.686435] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.686447] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.686448] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 1.686454] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.686455] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.686466] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.686495] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.686501] sd 0:0:0:0: [sda] Write Protect is off
[ 1.686501] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.686538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.686553] sd 4:0:0:0: [sde] 488395055 512-byte logical blocks: (250 GB/233 GiB)
[ 1.686560] sd 4:0:0:0: [sde] Write Protect is off
[ 1.686560] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.686576] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.686586] sd 5:0:0:0: [sdf] 976771055 512-byte logical blocks: (500 GB/466 GiB)
[ 1.686592] sd 5:0:0:0: [sdf] Write Protect is off
[ 1.686592] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 1.686602] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.694259] sda: sda1 sda2 sda3 < sda5 > sda4
[ 1.694796] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.694984] sdc: sdc1
[ 1.695115] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.696579] sdb: sdb1
[ 1.696792] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.699159] sdd: sdd1 sdd3
[ 1.699393] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.706177] sde: sde1
[ 1.706416] sd 4:0:0:0: [sde] Attached SCSI disk
[ 1.756749] usb 2-1: New USB device found, idVendor=0bda, idProduct=0301, bcdDevice= 1.27
[ 1.756752] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.756754] usb 2-1: Product: USB3.0 Card Reader
[ 1.756755] usb 2-1: Manufacturer: Realtek
[ 1.756757] usb 2-1: SerialNumber: 201407140001
[ 1.764558] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 1.764753] scsi host8: usb-storage 2-1:1.0
[ 1.764803] usbcore: registered new interface driver usb-storage
[ 1.765107] usbcore: registered new interface driver uas
[ 1.776812] sdf: sdf1 sdf2 sdf3 < sdf5 sdf6 sdf7 sdf8 sdf9 >
[ 1.777201] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 1.876598] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 1.888732] usb 2-4: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 1.888734] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.889054] hub 2-4:1.0: USB hub found
[ 1.889074] hub 2-4:1.0: 4 ports detected
[ 1.945586] usb 3-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.961888] usb 3-1.5: New USB device found, idVendor=058f, idProduct=6377, bcdDevice= 1.00
[ 1.961891] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.961893] usb 3-1.5: Product: Mass Storage Device
[ 1.961894] usb 3-1.5: Manufacturer: Generic
[ 1.961896] usb 3-1.5: SerialNumber: 920321111113
[ 1.962275] usb-storage 3-1.5:1.0: USB Mass Storage device detected
[ 1.962629] scsi host9: usb-storage 3-1.5:1.0
[ 2.097601] tsc: Refined TSC clocksource calibration: 3203.150 MHz
[ 2.097609] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e2be9e3e22, max_idle_ns: 440795311167 ns
[ 2.097685] clocksource: Switched to clocksource tsc
[ 2.173573] usb 2-4.4: new full-speed USB device number 4 using xhci_hcd
[ 2.262577] usb 2-4.4: New USB device found, idVendor=0557, idProduct=8021, bcdDevice= 1.00
[ 2.262579] usb 2-4.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.265255] hub 2-4.4:1.0: USB hub found
[ 2.265374] hub 2-4.4:1.0: 4 ports detected
[ 2.537580] usb 2-4.4.1: new full-speed USB device number 5 using xhci_hcd
[ 2.632243] usb 2-4.4.1: New USB device found, idVendor=04f3, idProduct=0103, bcdDevice= 1.07
[ 2.632244] usb 2-4.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.649065] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/2-4.4.1/2-4.4.1:1.0/0003:04F3:0103.0001/input/input5
[ 2.649132] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-4.4.1/input0
[ 2.656699] input: HID 04f3:0103 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/2-4.4.1/2-4.4.1:1.1/0003:04F3:0103.0002/input/input6
[ 2.656724] input: HID 04f3:0103 System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/2-4.4.1/2-4.4.1:1.1/0003:04F3:0103.0002/input/input7
[ 2.656799] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:14.0-4.4.1/input1
[ 2.666753] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/2-4.4.1/2-4.4.1:1.2/0003:04F3:0103.0003/input/input8
[ 2.666798] hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Mouse [HID 04f3:0103] on usb-0000:00:14.0-4.4.1/input2
[ 2.816907] scsi 8:0:0:0: Direct-Access Generic- USB3.0 CRW-CF/MD 1.00 PQ: 0 ANSI: 4
[ 2.830234] scsi 8:0:0:1: Direct-Access Generic- USB3.0 CRW-SM/xD 1.00 PQ: 0 ANSI: 4
[ 2.843294] scsi 8:0:0:2: Direct-Access Generic- USB3.0 CRW-SD 1.00 PQ: 0 ANSI: 4
[ 2.856459] scsi 8:0:0:3: Direct-Access Generic- USB3.0 CRW-MS 1.00 PQ: 0 ANSI: 4
[ 2.869871] scsi 8:0:0:4: Direct-Access Generic- USB3.0 CRW-SD/MS 1.00 PQ: 0 ANSI: 4
[ 2.885627] sd 8:0:0:0: [sdg] Attached SCSI removable disk
[ 2.892985] sd 8:0:0:1: [sdh] Attached SCSI removable disk
[ 2.896478] sd 8:0:0:3: [sdj] Attached SCSI removable disk
[ 2.898523] sd 8:0:0:4: [sdk] Attached SCSI removable disk
[ 2.905491] sd 8:0:0:2: [sdi] Attached SCSI removable disk
[ 2.994376] scsi 9:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.995015] scsi 9:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.995636] scsi 9:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.996260] scsi 9:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.002004] sd 9:0:0:0: [sdl] Attached SCSI removable disk
[ 3.004101] sd 9:0:0:2: [sdn] Attached SCSI removable disk
[ 3.004120] async_tx: api initialized (async)
[ 3.005989] sd 9:0:0:1: [sdm] Attached SCSI removable disk
[ 3.007239] sd 9:0:0:3: [sdo] Attached SCSI removable disk
[ 3.826849] process '/usr/bin/fstype' started with executable stack
[ 3.857448] PM: Image not found (code -22)
[ 3.892808] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.977241] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 6.154592] systemd[1]: systemd 245.5-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 6.166703] systemd[1]: Detected architecture x86-64.
[ 6.178229] systemd[1]: Set hostname to <silverbox>.
[ 6.264336] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 6.325433] systemd[1]: Unnecessary job for /dev/mapper/desktop-usr was removed.
[ 6.326290] systemd[1]: Created slice system-getty.slice.
[ 6.326515] systemd[1]: Created slice system-modprobe.slice.
[ 6.326708] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.326903] systemd[1]: Created slice User and Session Slice.
[ 6.326962] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.327105] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.327192] systemd[1]: Reached target Slices.
[ 6.327230] systemd[1]: Reached target System Time Set.
[ 6.327271] systemd[1]: Reached target System Time Synchronized.
[ 6.327346] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.327423] systemd[1]: Listening on LVM2 poll daemon socket.
[ 6.330124] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 6.331518] systemd[1]: Listening on Process Core Dump Socket.
[ 6.331623] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.331681] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 6.331874] systemd[1]: Listening on Journal Audit Socket.
[ 6.332797] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.333764] systemd[1]: Listening on Journal Socket.
[ 6.334668] systemd[1]: Listening on udev Control Socket.
[ 6.335516] systemd[1]: Listening on udev Kernel Socket.
[ 6.336987] systemd[1]: Mounting Huge Pages File System...
[ 6.337922] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.338749] systemd[1]: Mounting RPC Pipe File System...
[ 6.340101] systemd[1]: Mounting Kernel Debug File System...
[ 6.340857] systemd[1]: Mounting Kernel Trace File System...
[ 6.341020] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 6.341623] systemd[1]: Starting Availability of block devices...
[ 6.342997] systemd[1]: Starting Set the console keyboard layout...
[ 6.343666] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 6.344484] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 6.345292] systemd[1]: Starting Load Kernel Module drm...
[ 6.346461] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 6.346486] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 6.347584] systemd[1]: Starting Journal Service...
[ 6.351559] systemd[1]: Starting Load Kernel Modules...
[ 6.352291] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.353581] systemd[1]: Starting udev Coldplug all Devices...
[ 6.355216] systemd[1]: Mounted Huge Pages File System.
[ 6.355356] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.355478] systemd[1]: Mounted Kernel Debug File System.
[ 6.355606] systemd[1]: Mounted Kernel Trace File System.
[ 6.355995] systemd[1]: Finished Availability of block devices.
[ 6.356432] systemd[1]: Finished Set the console keyboard layout.
[ 6.362914] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 6.365945] systemd[1]: modprobe@drm.service: Succeeded.
[ 6.366196] systemd[1]: Finished Load Kernel Module drm.
[ 6.366851] RPC: Registered named UNIX socket transport module.
[ 6.366852] RPC: Registered udp transport module.
[ 6.366852] RPC: Registered tcp transport module.
[ 6.366853] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.367898] systemd[1]: Mounted RPC Pipe File System.
[ 6.375389] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 6.377910] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 6.381040] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 6.382117] lp: driver loaded but no devices found
[ 6.382294] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 6.383025] systemd[1]: Starting Create System Users...
[ 6.386601] ppdev: user-space parallel port driver
[ 6.394299] fuse: init (API version 7.31)
[ 6.394318] *** VALIDATE fuseblk ***
[ 6.394320] *** VALIDATE fuse ***
[ 6.400045] systemd[1]: Finished Create System Users.
[ 6.400835] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.411037] systemd[1]: Finished Load Kernel Modules.
[ 6.412063] systemd[1]: Mounting FUSE Control File System...
[ 6.412172] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 6.412791] systemd[1]: Starting Apply Kernel Variables...
[ 6.415678] systemd[1]: Mounted FUSE Control File System.
[ 6.415824] systemd[1]: Condition check resulted in VMware vmblock fuse mount being skipped.
[ 6.417120] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 6.418206] systemd[1]: Starting udev Kernel Device Manager...
[ 6.424170] systemd[1]: Finished Apply Kernel Variables.
[ 6.457533] systemd[1]: Finished udev Coldplug all Devices.
[ 6.458491] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 6.465500] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 6.480164] systemd[1]: Started udev Kernel Device Manager.
[ 6.480850] systemd[1]: Starting Show Plymouth Boot Screen...
[ 6.499582] systemd[1]: Started Show Plymouth Boot Screen.
[ 6.499748] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 6.499833] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 6.500325] systemd[1]: Reached target Local Encrypted Volumes.
[ 6.509862] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 6.510031] systemd[1]: Reached target Local File Systems (Pre).
[ 6.593844] EDAC ie31200: No ECC support
[ 6.617783] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.617837] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.617894] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.617921] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.617950] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 6.617974] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 6.618070] iTCO_vendor_support: vendor-support=0
[ 6.618686] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.618717] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 6.621042] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 6.621088] sd 8:0:0:1: Attached scsi generic sg7 type 0
[ 6.621131] sd 8:0:0:2: Attached scsi generic sg8 type 0
[ 6.621170] sd 8:0:0:3: Attached scsi generic sg9 type 0
[ 6.621197] sd 8:0:0:4: Attached scsi generic sg10 type 0
[ 6.621218] sd 9:0:0:0: Attached scsi generic sg11 type 0
[ 6.621235] sd 9:0:0:1: Attached scsi generic sg12 type 0
[ 6.621282] sd 9:0:0:2: Attached scsi generic sg13 type 0
[ 6.621303] sd 9:0:0:3: Attached scsi generic sg14 type 0
[ 6.659952] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 6.660185] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 6.660212] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.660216] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 6.661419] MXM: GUID detected in BIOS
[ 6.661504] checking generic (f1000000 500000) vs hw (e0000000 10000000)
[ 6.661505] checking generic (f1000000 500000) vs hw (f0000000 2000000)
[ 6.661506] fb0: switching to nouveaufb from EFI VGA
[ 6.661558] Console: switching to colour dummy device 80x25
[ 6.661720] nouveau 0000:01:00.0: NVIDIA GP106 (136000a1)
[ 6.703322] snd_hda_codec_via hdaudioC0D2: autoconfig for VT2020: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[ 6.703324] snd_hda_codec_via hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.703325] snd_hda_codec_via hdaudioC0D2: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[ 6.703326] snd_hda_codec_via hdaudioC0D2: mono: mono_out=0x0
[ 6.703326] snd_hda_codec_via hdaudioC0D2: dig-out=0x2d/0x2e
[ 6.703327] snd_hda_codec_via hdaudioC0D2: inputs:
[ 6.703328] snd_hda_codec_via hdaudioC0D2: Front Mic=0x29
[ 6.703329] snd_hda_codec_via hdaudioC0D2: Rear Mic=0x2b
[ 6.703330] snd_hda_codec_via hdaudioC0D2: Line=0x2a
[ 6.729832] systemd[1]: Started Journal Service.
[ 6.733365] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.733417] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.733464] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 6.733497] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 6.733516] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 6.733550] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 6.733604] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 6.733636] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 6.733665] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 6.733695] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 6.733725] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 6.733754] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 6.733783] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 6.733813] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 6.733843] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 6.802554] input: PC Speaker as /devices/platform/pcspkr/input/input24
[ 6.938452] nouveau 0000:01:00.0: bios: version 86.06.63.00.e0
[ 6.946654] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/nvdec/scrubber.bin
[ 6.948350] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/bl.bin
[ 6.948974] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/ucode_load.bin
[ 6.949328] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/unload_bl.bin
[ 6.949723] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/ucode_unload.bin
[ 6.953721] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_bl.bin
[ 6.954212] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_inst.bin
[ 6.954714] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_data.bin
[ 6.954862] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_sig.bin
[ 6.954999] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_bl.bin
[ 6.955181] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_inst.bin
[ 6.955307] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_data.bin
[ 6.955431] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_sig.bin
[ 6.955566] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_nonctx.bin
[ 6.955718] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_ctx.bin
[ 6.955879] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_bundle_init.bin
[ 6.956029] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_method_init.bin
[ 6.956769] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/sig-1.bin
[ 6.957175] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/image-1.bin
[ 6.957314] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/desc-1.bin
[ 6.957600] nouveau 0000:01:00.0: fb: 6144 MiB GDDR5
[ 6.970091] [TTM] Zone kernel: Available graphics memory: 16457014 KiB
[ 6.970092] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 6.970092] [TTM] Initializing pool allocator
[ 6.970095] [TTM] Initializing DMA pool allocator
[ 6.970105] nouveau 0000:01:00.0: DRM: VRAM: 6144 MiB
[ 6.970106] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[ 6.970108] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 6.970109] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 6.970110] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 6.970111] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 6.970112] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f42 04620030
[ 6.970113] nouveau 0000:01:00.0: DRM: DCB outp 01: 04811f96 04600020
[ 6.970114] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011f92 04620020
[ 6.970115] nouveau 0000:01:00.0: DRM: DCB outp 03: 04822f86 04600010
[ 6.970116] nouveau 0000:01:00.0: DRM: DCB outp 04: 04022f82 04620010
[ 6.970117] nouveau 0000:01:00.0: DRM: DCB outp 06: 02033f62 04620010
[ 6.970117] nouveau 0000:01:00.0: DRM: DCB outp 08: 02044f72 00020020
[ 6.970118] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
[ 6.970119] nouveau 0000:01:00.0: DRM: DCB conn 01: 02000146
[ 6.970120] nouveau 0000:01:00.0: DRM: DCB conn 02: 01000246
[ 6.970121] nouveau 0000:01:00.0: DRM: DCB conn 03: 00010361
[ 6.970121] nouveau 0000:01:00.0: DRM: DCB conn 04: 00020461
[ 6.970430] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 7.020108] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[ 7.020124] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.020125] [drm] Driver supports precise vblank timestamp query.
[ 7.036858] intel_rapl_common: Found RAPL domain package
[ 7.036860] intel_rapl_common: Found RAPL domain core
[ 7.125138] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 7.126322] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem
[ 7.131751] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 7.141459] systemd-journald[523]: Received client request to flush runtime journal.
[ 7.148880] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 7.189584] Adding 14628860k swap on /dev/sdf1. Priority:-2 extents:1 across:14628860k
[ 7.300583] Adding 2048252k swap on /dev/sdf7. Priority:-3 extents:1 across:2048252k
[ 7.418545] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.445885] nouveau 0000:01:00.0: DVI-D-1: EDID is invalid:
[ 7.445888] [00] GOOD 00 ff ff ff ff ff ff 00 04 68 fa 00 00 00 00 00
[ 7.445888] [00] GOOD 28 15 01 03 a5 3c 22 78 22 6f b1 a7 55 4c 9e 25
[ 7.445889] [00] GOOD 0c 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
[ 7.445889] [00] GOOD 01 01 01 01 01 01 56 5e 00 a0 a0 a0 29 50 30 20
[ 7.445889] [00] GOOD 35 00 55 50 21 00 00 1a 00 00 00 fc 00 51 48 44
[ 7.445890] [00] GOOD 32 37 30 0a 20 20 20 20 20 20 00 00 00 fc 00 51
[ 7.445890] [00] GOOD 48 44 32 37 30 0a 20 20 20 20 20 20 00 00 00 fc
[ 7.445891] [00] GOOD 00 51 48 44 32 37 30 0a 20 20 20 20 20 20 01 b0
[ 7.445891] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.445892] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.445892] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.445893] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.445893] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.445894] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.445894] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.445894] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.646795] nouveau 0000:01:00.0: DRM: allocated 2560x1440 fb: 0x200000, bo 0000000058eb2f08
[ 7.656691] fbcon: nouveaudrmfb (fb0) is primary device
[ 7.914867] Console: switching to colour frame buffer device 320x90
[ 8.150421] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
[ 8.158853] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 8.196414] EXT4-fs (dm-5): warning: mounting fs with errors, running e2fsck is recommended
[ 8.213623] EXT4-fs (sdf6): warning: checktime reached, running e2fsck is recommended
[ 8.235796] FAT-fs (sdf8): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 8.243785] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 8.270566] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.879521] EXT4-fs (sdf6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.608375] atl1c 0000:06:00.0: atl1c: enp6s0 NIC Link is Up<1000 Mbps Full Duplex>
[ 12.537745] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 14.722270] nouveau 0000:01:00.0: DRM: core notifier timeout
[ 16.722487] nouveau 0000:01:00.0: DRM: base-0: timeoutI also managed to capture the log for the one "good" boot just now:
[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13
[ 0.000000] Linux version 5.6.7-towo.1-siduction-amd64 (towo@siduction.org) (gcc version 9.3.0 (Debian 9.3.0-10)) #1 SMP PREEMPT siduction 5.6-7 (2020-04-23)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.6.7-towo.1-siduction-amd64 root=/dev/mapper/desktop-base ro quiet systemd.show_status=1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ddddbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddddc000-0x00000000de035fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de036000-0x00000000de042fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000de043000-0x00000000de0bbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de0bc000-0x00000000de0c1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000de0c2000-0x00000000de146fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de147000-0x00000000de1e1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de1e2000-0x00000000de989fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de98a000-0x00000000dea12fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000dea13000-0x00000000dea13fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dea14000-0x00000000dea56fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dea57000-0x00000000df45ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df460000-0x00000000df7d6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7d7000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xde036000 ACPI 2.0=0xde036000 SMBIOS=0xf04c0 MPS=0xfd440
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77X-UD3H, BIOS F20e 01/06/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3203.274 MHz processor
[ 0.001540] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001542] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001547] last_pfn = 0x81f000 max_arch_pfn = 0x400000000
[ 0.001550] MTRR default type: uncachable
[ 0.001551] MTRR fixed ranges enabled:
[ 0.001552] 00000-9FFFF write-back
[ 0.001552] A0000-BFFFF uncachable
[ 0.001553] C0000-CFFFF write-protect
[ 0.001553] D0000-DFFFF uncachable
[ 0.001554] E0000-FFFFF write-protect
[ 0.001554] MTRR variable ranges enabled:
[ 0.001555] 0 base 000000000 mask 800000000 write-back
[ 0.001556] 1 base 800000000 mask FF0000000 write-back
[ 0.001557] 2 base 810000000 mask FF8000000 write-back
[ 0.001557] 3 base 818000000 mask FFC000000 write-back
[ 0.001558] 4 base 81C000000 mask FFE000000 write-back
[ 0.001558] 5 base 81E000000 mask FFF000000 write-back
[ 0.001559] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.001559] 7 disabled
[ 0.001559] 8 disabled
[ 0.001560] 9 disabled
[ 0.001810] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001942] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.001945] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.011070] found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef]
[ 0.011099] BRK [0x02c01000, 0x02c01fff] PGTABLE
[ 0.011101] BRK [0x02c02000, 0x02c02fff] PGTABLE
[ 0.011101] BRK [0x02c03000, 0x02c03fff] PGTABLE
[ 0.011140] BRK [0x02c04000, 0x02c04fff] PGTABLE
[ 0.011231] BRK [0x02c05000, 0x02c05fff] PGTABLE
[ 0.011434] BRK [0x02c06000, 0x02c06fff] PGTABLE
[ 0.012111] Secure boot could not be determined
[ 0.012112] RAMDISK: [mem 0x31215000-0x34901fff]
[ 0.012118] ACPI: Early table checksum verification disabled
[ 0.012120] ACPI: RSDP 0x00000000DE036000 000024 (v02 ALASKA)
[ 0.012123] ACPI: XSDT 0x00000000DE036070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.012127] ACPI: FACP 0x00000000DE040AE0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.012131] ACPI: DSDT 0x00000000DE036168 00A971 (v02 ALASKA A M I 00000012 INTL 20051117)
[ 0.012134] ACPI: FACS 0x00000000DE1E0F80 000040
[ 0.012136] ACPI: APIC 0x00000000DE040BD8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.012138] ACPI: MCFG 0x00000000DE040C50 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.012140] ACPI: HPET 0x00000000DE040C90 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.012142] ACPI: SSDT 0x00000000DE040CC8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.012145] ACPI: SSDT 0x00000000DE041038 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.012147] ACPI: SSDT 0x00000000DE0419E8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.012149] ACPI: DMAR 0x00000000DE042480 000080 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.012157] ACPI: Local APIC address 0xfee00000
[ 0.012224] No NUMA configuration found
[ 0.012225] Faking a node at [mem 0x0000000000000000-0x000000081effffff]
[ 0.012228] NODE_DATA(0) allocated [mem 0x81efdc000-0x81efddfff]
[ 0.012261] Zone ranges:
[ 0.012262] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012262] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012263] Normal [mem 0x0000000100000000-0x000000081effffff]
[ 0.012264] Movable zone start for each node
[ 0.012264] Early memory node ranges
[ 0.012265] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.012266] node 0: [mem 0x0000000000100000-0x00000000ddddbfff]
[ 0.012266] node 0: [mem 0x00000000de0c2000-0x00000000de146fff]
[ 0.012267] node 0: [mem 0x00000000dea13000-0x00000000dea13fff]
[ 0.012267] node 0: [mem 0x00000000dea57000-0x00000000df45ffff]
[ 0.012268] node 0: [mem 0x00000000df7d7000-0x00000000df7fffff]
[ 0.012268] node 0: [mem 0x0000000100000000-0x000000081effffff]
[ 0.012347] Zeroed struct page in unavailable ranges: 10190 pages
[ 0.012348] Initmem setup node 0 [mem 0x0000000000001000-0x000000081effffff]
[ 0.012349] On node 0 totalpages: 8378418
[ 0.012350] DMA zone: 64 pages used for memmap
[ 0.012350] DMA zone: 27 pages reserved
[ 0.012351] DMA zone: 3998 pages, LIFO batch:0
[ 0.012397] DMA32 zone: 14179 pages used for memmap
[ 0.012397] DMA32 zone: 907412 pages, LIFO batch:63
[ 0.022929] Normal zone: 116672 pages used for memmap
[ 0.022930] Normal zone: 7467008 pages, LIFO batch:63
[ 0.108212] ACPI: PM-Timer IO Port: 0x408
[ 0.108214] ACPI: Local APIC address 0xfee00000
[ 0.108220] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.108230] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.108232] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.108233] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.108234] ACPI: IRQ0 used by override.
[ 0.108235] ACPI: IRQ9 used by override.
[ 0.108236] Using ACPI (MADT) for SMP configuration information
[ 0.108237] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.108242] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.108265] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.108267] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.108267] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.108268] PM: hibernation: Registered nosave memory: [mem 0xddddc000-0xde035fff]
[ 0.108269] PM: hibernation: Registered nosave memory: [mem 0xde036000-0xde042fff]
[ 0.108269] PM: hibernation: Registered nosave memory: [mem 0xde043000-0xde0bbfff]
[ 0.108270] PM: hibernation: Registered nosave memory: [mem 0xde0bc000-0xde0c1fff]
[ 0.108271] PM: hibernation: Registered nosave memory: [mem 0xde147000-0xde1e1fff]
[ 0.108272] PM: hibernation: Registered nosave memory: [mem 0xde1e2000-0xde989fff]
[ 0.108272] PM: hibernation: Registered nosave memory: [mem 0xde98a000-0xdea12fff]
[ 0.108274] PM: hibernation: Registered nosave memory: [mem 0xdea14000-0xdea56fff]
[ 0.108275] PM: hibernation: Registered nosave memory: [mem 0xdf460000-0xdf7d6fff]
[ 0.108276] PM: hibernation: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.108277] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.108277] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.108278] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.108278] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.108279] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.108279] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.108279] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.108280] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.108280] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.108281] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.108281] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.108283] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.108285] Booting paravirtualized kernel on bare hardware
[ 0.108287] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.112498] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.112654] percpu: Embedded 54 pages/cpu s182552 r8192 d30440 u524288
[ 0.112660] pcpu-alloc: s182552 r8192 d30440 u524288 alloc=1*2097152
[ 0.112660] pcpu-alloc: [0] 0 1 2 3
[ 0.112682] Built 1 zonelists, mobility grouping on. Total pages: 8247476
[ 0.112683] Policy zone: Normal
[ 0.112684] Kernel command line: BOOT_IMAGE=/vmlinuz-5.6.7-towo.1-siduction-amd64 root=/dev/mapper/desktop-base ro quiet systemd.show_status=1
[ 0.114324] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.115134] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.115183] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.197539] Memory: 32578040K/33513672K available (14340K kernel code, 1540K rwdata, 3980K rodata, 1468K init, 880K bss, 935632K reserved, 0K cma-reserved)
[ 0.197576] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.197584] Kernel/User page tables isolation: enabled
[ 0.197596] ftrace: allocating 42168 entries in 165 pages
[ 0.210050] ftrace: allocated 165 pages with 4 groups
[ 0.210108] rcu: Preemptible hierarchical RCU implementation.
[ 0.210109] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.210109] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.210110] Tasks RCU enabled.
[ 0.210111] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.210111] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.210254] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.210409] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.210453] random: crng done (trusting CPU's manufacturer)
[ 0.210469] Console: colour dummy device 80x25
[ 0.210473] printk: console [tty0] enabled
[ 0.210483] ACPI: Core revision 20200110
[ 0.210554] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.210563] APIC: Switch to symmetric I/O mode setup
[ 0.210565] DMAR: Host address width 36
[ 0.210565] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.210569] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.210570] DMAR: RMRR base: 0x000000de043000 end: 0x000000de04ffff
[ 0.210572] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.210572] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.210573] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.210803] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.210804] x2apic enabled
[ 0.210810] Switched APIC routing to cluster x2apic.
[ 0.211215] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.215565] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e2c5effa26, max_idle_ns: 440795254945 ns
[ 0.215568] Calibrating delay loop (skipped), value calculated using timer frequency.. 6406.54 BogoMIPS (lpj=3203274)
[ 0.215570] pid_max: default: 32768 minimum: 301
[ 0.220582] LSM: Security Framework initializing
[ 0.220586] Yama: becoming mindful.
[ 0.220599] AppArmor: AppArmor initialized
[ 0.220657] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.220714] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.220723] *** VALIDATE tmpfs ***
[ 0.220832] *** VALIDATE proc ***
[ 0.220870] *** VALIDATE cgroup ***
[ 0.220871] *** VALIDATE cgroup2 ***
[ 0.220895] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.220909] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.220920] process: using mwait in idle threads
[ 0.220922] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.220923] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.220925] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.220926] Spectre V2 : Mitigation: Full generic retpoline
[ 0.220926] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.220927] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.220928] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.220929] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.220931] MDS: Mitigation: Clear CPU buffers
[ 0.221066] Freeing SMP alternatives memory: 44K
[ 0.221625] TSC deadline timer enabled
[ 0.221627] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1225 V2 @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.227576] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.227586] ... version: 3
[ 0.227587] ... bit width: 48
[ 0.227587] ... generic registers: 8
[ 0.227589] ... value mask: 0000ffffffffffff
[ 0.227589] ... max period: 00007fffffffffff
[ 0.227590] ... fixed-purpose events: 3
[ 0.227591] ... event mask: 00000007000000ff
[ 0.229571] rcu: Hierarchical SRCU implementation.
[ 0.231780] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.233575] smp: Bringing up secondary CPUs ...
[ 0.241583] x86: Booting SMP configuration:
[ 0.241585] .... node #0, CPUs: #1 #2 #3
[ 0.261616] smp: Brought up 1 node, 4 CPUs
[ 0.261616] smpboot: Max logical packages: 1
[ 0.261616] smpboot: Total of 4 processors activated (25626.19 BogoMIPS)
[ 0.262807] devtmpfs: initialized
[ 0.262807] PM: Registering ACPI NVS region [mem 0xde147000-0xde1e1fff] (634880 bytes)
[ 0.262807] PM: Registering ACPI NVS region [mem 0xdea14000-0xdea56fff] (274432 bytes)
[ 0.262807] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.262807] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.262807] xor: automatically using best checksumming function avx
[ 0.262807] pinctrl core: initialized pinctrl subsystem
[ 0.262807] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.262807] thermal_sys: Registered thermal governor 'step_wise'
[ 0.262807] thermal_sys: Registered thermal governor 'user_space'
[ 0.262807] NET: Registered protocol family 16
[ 0.262825] audit: initializing netlink subsys (disabled)
[ 0.262830] audit: type=2000 audit(1588157246.052:1): state=initialized audit_enabled=0 res=1
[ 0.262830] cpuidle: using governor ladder
[ 0.262830] cpuidle: using governor menu
[ 0.262830] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.262830] ACPI: bus type PCI registered
[ 0.262830] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.262830] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.262830] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.262830] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.263584] PCI: Using configuration type 1 for base access
[ 0.263639] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.263721] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.264587] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.264596] cryptd: max_cpu_qlen set to 1000
[ 0.282568] raid6: sse2x4 gen() 16245 MB/s
[ 0.299568] raid6: sse2x4 xor() 8583 MB/s
[ 0.316567] raid6: sse2x2 gen() 16426 MB/s
[ 0.333568] raid6: sse2x2 xor() 9093 MB/s
[ 0.350568] raid6: sse2x1 gen() 13659 MB/s
[ 0.367567] raid6: sse2x1 xor() 7920 MB/s
[ 0.367568] raid6: using algorithm sse2x2 gen() 16426 MB/s
[ 0.367568] raid6: .... xor() 9093 MB/s, rmw enabled
[ 0.367569] raid6: using ssse3x2 recovery algorithm
[ 0.367602] ACPI: Added _OSI(Module Device)
[ 0.367602] ACPI: Added _OSI(Processor Device)
[ 0.367603] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.367604] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.367605] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.367605] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.367606] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.371696] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.372830] ACPI: Dynamic OEM Table Load:
[ 0.372835] ACPI: SSDT 0xFFFF8887FB09D000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.373379] ACPI: Dynamic OEM Table Load:
[ 0.373381] ACPI: SSDT 0xFFFF8887FB3A2C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.373830] ACPI: Dynamic OEM Table Load:
[ 0.373832] ACPI: SSDT 0xFFFF8887FADD0400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.374738] ACPI: Interpreter enabled
[ 0.374754] ACPI: (supports S0 S3 S4 S5)
[ 0.374754] ACPI: Using IOAPIC for interrupt routing
[ 0.374773] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.374958] ACPI: Enabled 15 GPEs in block 00 to 3F
[ 0.380178] ACPI: Power Resource [FN00] (off)
[ 0.380237] ACPI: Power Resource [FN01] (off)
[ 0.380293] ACPI: Power Resource [FN02] (off)
[ 0.380350] ACPI: Power Resource [FN03] (off)
[ 0.380407] ACPI: Power Resource [FN04] (off)
[ 0.380826] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.380830] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.380991] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.381086] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.381087] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.381417] PCI host bridge to bus 0000:00
[ 0.381419] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.381420] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.381421] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.381422] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.381422] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.381423] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.381424] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.381425] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.381426] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.381433] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
[ 0.381512] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.381545] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.381644] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.381667] pci 0000:00:14.0: reg 0x10: [mem 0xf7400000-0xf740ffff 64bit]
[ 0.381733] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.381809] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.381832] pci 0000:00:16.0: reg 0x10: [mem 0xf741a000-0xf741a00f 64bit]
[ 0.381901] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.381975] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.381995] pci 0000:00:1a.0: reg 0x10: [mem 0xf7418000-0xf74183ff]
[ 0.382074] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.382152] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.382170] pci 0000:00:1b.0: reg 0x10: [mem 0xf7410000-0xf7413fff 64bit]
[ 0.382232] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.382311] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.382401] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.382420] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.382422] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.382498] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.382588] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.382606] pci 0000:00:1c.4: Enabling MPC IRBNCE
[ 0.382608] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[ 0.382681] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[ 0.382770] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.382854] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
[ 0.382944] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.382962] pci 0000:00:1c.6: Enabling MPC IRBNCE
[ 0.382963] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled
[ 0.383035] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[ 0.383124] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.383142] pci 0000:00:1c.7: Enabling MPC IRBNCE
[ 0.383143] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[ 0.383216] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.383236] pci 0000:00:1d.0: reg 0x10: [mem 0xf7417000-0xf74173ff]
[ 0.383315] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.383395] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[ 0.383565] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.383581] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.383587] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.383594] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.383600] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.383606] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.383613] pci 0000:00:1f.2: reg 0x24: [mem 0xf7416000-0xf74167ff]
[ 0.383650] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.383721] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.383738] pci 0000:00:1f.3: reg 0x10: [mem 0xf7415000-0xf74150ff 64bit]
[ 0.383757] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.383865] pci 0000:01:00.0: [10de:1c03] type 00 class 0x030000
[ 0.383881] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.383889] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.383897] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.383903] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.383908] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.383913] pci 0000:01:00.0: enabling Extended Tags
[ 0.383922] pci 0000:01:00.0: BAR 3: assigned to efifb
[ 0.383982] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.384013] pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
[ 0.384024] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.384048] pci 0000:01:00.1: enabling Extended Tags
[ 0.384134] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.384136] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.384137] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.384139] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.384180] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.384251] pci 0000:03:00.0: [1106:3432] type 00 class 0x0c0330
[ 0.384278] pci 0000:03:00.0: reg 0x10: [mem 0xf7300000-0xf7300fff]
[ 0.384414] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384505] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.384509] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.384571] pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
[ 0.384759] pci 0000:04:00.0: supports D1 D2
[ 0.384760] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384820] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.384829] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.384830] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.384831] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.384832] pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.384832] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.384833] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.384834] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.384835] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.384882] pci_bus 0000:05: extended config space not accessible
[ 0.384973] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.384997] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.384998] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.384999] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.385000] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.385001] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.385002] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.385003] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.385003] pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.385074] pci 0000:06:00.0: [1969:1083] type 00 class 0x020000
[ 0.385114] pci 0000:06:00.0: reg 0x10: [mem 0xf7200000-0xf723ffff 64bit]
[ 0.385127] pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.385270] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385376] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.385379] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.385381] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.385440] pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.385467] pci 0000:07:00.0: reg 0x10: [io 0xc040-0xc047]
[ 0.385478] pci 0000:07:00.0: reg 0x14: [io 0xc030-0xc033]
[ 0.385489] pci 0000:07:00.0: reg 0x18: [io 0xc020-0xc027]
[ 0.385501] pci 0000:07:00.0: reg 0x1c: [io 0xc010-0xc013]
[ 0.385512] pci 0000:07:00.0: reg 0x20: [io 0xc000-0xc00f]
[ 0.385523] pci 0000:07:00.0: reg 0x24: [mem 0xf7110000-0xf71101ff]
[ 0.385535] pci 0000:07:00.0: reg 0x30: [mem 0xf7100000-0xf710ffff pref]
[ 0.385557] pci 0000:07:00.0: Enabling fixed DMA alias to 00.1
[ 0.385609] pci 0000:07:00.0: PME# supported from D3hot
[ 0.385694] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.385697] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.385700] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.386060] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.386098] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.386134] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.386169] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.386203] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.386240] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.386275] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.386310] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.386626] iommu: Default domain type: Translated
[ 0.386635] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.386635] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.386635] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.386635] vgaarb: loaded
[ 0.386649] SCSI subsystem initialized
[ 0.386658] libata version 3.00 loaded.
[ 0.386658] ACPI: bus type USB registered
[ 0.386658] usbcore: registered new interface driver usbfs
[ 0.386658] usbcore: registered new interface driver hub
[ 0.386658] usbcore: registered new device driver usb
[ 0.386658] EDAC MC: Ver: 3.0.0
[ 0.386685] Registered efivars operations
[ 0.386685] PCI: Using ACPI for IRQ routing
[ 0.388315] PCI: pci_cache_line_size set to 64 bytes
[ 0.388368] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.388369] e820: reserve RAM buffer [mem 0xddddc000-0xdfffffff]
[ 0.388371] e820: reserve RAM buffer [mem 0xde147000-0xdfffffff]
[ 0.388372] e820: reserve RAM buffer [mem 0xdea14000-0xdfffffff]
[ 0.388372] e820: reserve RAM buffer [mem 0xdf460000-0xdfffffff]
[ 0.388373] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.388374] e820: reserve RAM buffer [mem 0x81f000000-0x81fffffff]
[ 0.388451] NetLabel: Initializing
[ 0.388451] NetLabel: domain hash size = 128
[ 0.388452] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.388461] NetLabel: unlabeled traffic allowed by default
[ 0.388941] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.388944] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.390580] clocksource: Switched to clocksource tsc-early
[ 0.414009] *** VALIDATE bpf ***
[ 0.414072] VFS: Disk quotas dquot_6.6.0
[ 0.414083] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.414102] *** VALIDATE ramfs ***
[ 0.414104] *** VALIDATE hugetlbfs ***
[ 0.414161] AppArmor: AppArmor Filesystem Enabled
[ 0.414179] pnp: PnP ACPI init
[ 0.414248] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.414252] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.414316] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.414317] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.414318] system 00:01: [io 0xffff] has been reserved
[ 0.414319] system 00:01: [io 0xffff] has been reserved
[ 0.414320] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.414321] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.414322] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.414325] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414340] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.414381] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.414384] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.414480] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.414481] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.414482] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.414485] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414543] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.414546] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414720] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.414722] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.414723] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.414724] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.414725] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.414726] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.414727] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.414728] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.414729] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.414730] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.414731] system 00:06: [mem 0xf2000000-0xf2000fff] has been reserved
[ 0.414734] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414828] pnp: PnP ACPI: found 7 devices
[ 0.420230] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.420260] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.420262] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.420264] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.420265] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.420268] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.420278] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.420281] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.420288] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.420310] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[ 0.420320] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.420322] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.420325] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.420332] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.420334] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.420338] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.420345] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.420346] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.420347] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.420348] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.420349] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.420350] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.420350] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.420351] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[ 0.420353] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.420353] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.420354] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.420355] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
[ 0.420356] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.420357] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.420358] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.420359] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.420360] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.420361] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.420362] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.420362] pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff window]
[ 0.420363] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.420364] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.420365] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.420366] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.420367] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.420368] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.420368] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.420369] pci_bus 0000:05: resource 11 [mem 0xe0000000-0xfeafffff window]
[ 0.420370] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.420371] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.420372] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
[ 0.420373] pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.420447] NET: Registered protocol family 2
[ 0.420542] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.420577] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.420791] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.420900] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.420920] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.420976] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.421056] NET: Registered protocol family 1
[ 0.437675] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x621 took 16059 usecs
[ 0.454672] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x621 took 16581 usecs
[ 0.454689] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.454698] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.454847] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes
[ 0.454850] pci 0000:06:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.454883] Trying to unpack rootfs image as initramfs...
[ 1.083953] Freeing initrd memory: 56244K
[ 1.083982] DMAR: No ATSR found
[ 1.084007] DMAR: dmar0: Using Queued invalidation
[ 1.084128] pci 0000:00:00.0: Adding to iommu group 0
[ 1.084163] pci 0000:00:01.0: Adding to iommu group 1
[ 1.084213] pci 0000:00:14.0: Adding to iommu group 2
[ 1.084244] pci 0000:00:16.0: Adding to iommu group 3
[ 1.084294] pci 0000:00:1a.0: Adding to iommu group 4
[ 1.084322] pci 0000:00:1b.0: Adding to iommu group 5
[ 1.084355] pci 0000:00:1c.0: Adding to iommu group 6
[ 1.084385] pci 0000:00:1c.4: Adding to iommu group 7
[ 1.084424] pci 0000:00:1c.5: Adding to iommu group 8
[ 1.084454] pci 0000:00:1c.6: Adding to iommu group 9
[ 1.084491] pci 0000:00:1c.7: Adding to iommu group 10
[ 1.084540] pci 0000:00:1d.0: Adding to iommu group 11
[ 1.085769] pci 0000:00:1f.0: Adding to iommu group 12
[ 1.085778] pci 0000:00:1f.2: Adding to iommu group 12
[ 1.085787] pci 0000:00:1f.3: Adding to iommu group 12
[ 1.085795] pci 0000:01:00.0: Adding to iommu group 1
[ 1.085800] pci 0000:01:00.1: Adding to iommu group 1
[ 1.085836] pci 0000:03:00.0: Adding to iommu group 13
[ 1.085845] pci 0000:04:00.0: Adding to iommu group 8
[ 1.085875] pci 0000:06:00.0: Adding to iommu group 14
[ 1.085912] pci 0000:07:00.0: Adding to iommu group 15
[ 1.085914] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.087211] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 1.087212] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 1.087212] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 1.132196] AVX2 instructions are not detected.
[ 1.132441] Initialise system trusted keyrings
[ 1.132465] workingset: timestamp_bits=44 max_order=23 bucket_order=0
[ 1.133564] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 1.133759] *** VALIDATE xfs ***
[ 1.138031] NET: Registered protocol family 38
[ 1.138033] Key type asymmetric registered
[ 1.138034] Asymmetric key parser 'x509' registered
[ 1.138035] Asymmetric key parser 'pkcs8' registered
[ 1.138040] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.138062] io scheduler mq-deadline registered
[ 1.138062] io scheduler kyber registered
[ 1.138078] io scheduler bfq registered
[ 1.138864] efifb: probing for efifb
[ 1.138877] efifb: framebuffer at 0xf1000000, using 5120k, total 5120k
[ 1.138878] efifb: mode is 1280x1024x32, linelength=5120, pages=1
[ 1.138879] efifb: scrolling: redraw
[ 1.138880] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.138942] Console: switching to colour frame buffer device 160x64
[ 1.141187] fb0: EFI VGA frame buffer device
[ 1.141193] intel_idle: MWAIT substates: 0x1120
[ 1.141193] intel_idle: v0.4.1 model 0x3A
[ 1.141332] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.141536] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.141971] Linux agpgart interface v0.103
[ 1.143482] brd: module loaded
[ 1.144196] loop: module loaded
[ 1.144454] i8042: PNP: No PS/2 controller found.
[ 1.144455] i8042: Probing ports directly.
[ 1.144857] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.144876] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.144939] mousedev: PS/2 mouse device common for all mice
[ 1.144975] rtc_cmos 00:02: RTC can wake from S4
[ 1.145131] rtc_cmos 00:02: registered as rtc0
[ 1.145143] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.146693] device-mapper: uevent: version 1.0.3
[ 1.146765] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 1.147016] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 1.147017] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 1.147018] device-mapper: multipath service-time: version 0.3.0 loaded
[ 1.147028] intel_pstate: Intel P-state driver initializing
[ 1.147257] EFI Variables Facility v0.08 2004-May-17
[ 1.175121] hid: raw HID events driver (C) Jiri Kosina
[ 1.175147] usbcore: registered new interface driver usbhid
[ 1.175147] usbhid: USB HID core driver
[ 1.175308] NET: Registered protocol family 10
[ 1.175443] Segment Routing with IPv6
[ 1.175457] mip6: Mobile IPv6
[ 1.175458] NET: Registered protocol family 17
[ 1.175482] Key type dns_resolver registered
[ 1.175661] microcode: sig=0x306a9, pf=0x2, revision=0x21
[ 1.175699] microcode: Microcode Update Driver: v2.2.
[ 1.175701] IPI shorthand broadcast: enabled
[ 1.175716] AVX version of gcm_enc/dec engaged.
[ 1.175716] AES CTR mode by8 optimization enabled
[ 1.190047] sched_clock: Marking stable (1189909104, 134031)->(1198864221, -8821086)
[ 1.190214] registered taskstats version 1
[ 1.190216] Loading compiled-in X.509 certificates
[ 1.190244] Key type ._fscrypt registered
[ 1.190244] Key type .fscrypt registered
[ 1.190245] Key type fscrypt-provisioning registered
[ 1.190393] Btrfs loaded, crc32c=crc32c-intel
[ 1.193572] Key type encrypted registered
[ 1.193575] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.193734] rtc_cmos 00:02: setting system clock to 2020-04-29T10:47:27 UTC (1588157247)
[ 1.194421] Freeing unused kernel image (initmem) memory: 1468K
[ 1.211615] Write protecting the kernel read-only data: 20480k
[ 1.212128] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.212202] Freeing unused kernel image (rodata/data gap) memory: 116K
[ 1.212214] rodata_test: all tests were successful
[ 1.212215] Run /init as init process
[ 1.212215] with arguments:
[ 1.212216] /init
[ 1.212216] with environment:
[ 1.212216] HOME=/
[ 1.212217] TERM=linux
[ 1.212217] BOOT_IMAGE=/vmlinuz-5.6.7-towo.1-siduction-amd64
[ 1.296535] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.297603] ACPI: Power Button [PWRB]
[ 1.297637] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.298756] ACPI: Power Button [PWRF]
[ 1.309927] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.309979] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.309980] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.310055] ehci-pci: EHCI PCI platform driver
[ 1.313192] ahci 0000:00:1f.2: version 3.0
[ 1.313196] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 1.313269] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200110/utaddress-204)
[ 1.313274] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.313303] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[ 1.313307] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.313330] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[ 1.313332] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.313376] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000051F (\LED) (20200110/utaddress-204)
[ 1.313380] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[ 1.313383] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.313383] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.313407] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.313412] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.314477] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 1.314481] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.314604] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.314605] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.314606] usb usb1: Product: xHCI Host Controller
[ 1.314606] usb usb1: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 xhci-hcd
[ 1.314607] usb usb1: SerialNumber: 0000:00:14.0
[ 1.314719] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.314931] hub 1-0:1.0: USB hub found
[ 1.314940] hub 1-0:1.0: 4 ports detected
[ 1.315617] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.315618] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.315873] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.315876] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 1.315885] ehci-pci 0000:00:1a.0: debug port 2
[ 1.316612] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.316615] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.316617] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.316648] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 1.316649] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.316649] usb usb3: Product: xHCI Host Controller
[ 1.316650] usb usb3: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 xhci-hcd
[ 1.316651] usb usb3: SerialNumber: 0000:00:14.0
[ 1.316745] hub 3-0:1.0: USB hub found
[ 1.316756] hub 3-0:1.0: 4 ports detected
[ 1.319782] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.319791] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7418000
[ 1.324789] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.324791] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.326576] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.326601] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.326602] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.326603] usb usb2: Product: EHCI Host Controller
[ 1.326604] usb usb2: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 ehci_hcd
[ 1.326605] usb usb2: SerialNumber: 0000:00:1a.0
[ 1.326671] hub 2-0:1.0: USB hub found
[ 1.326677] hub 2-0:1.0: 2 ports detected
[ 1.326794] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.326798] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 1.326910] xhci_hcd 0000:03:00.0: hcc params 0x002810eb hci version 0x96 quirks 0x0000000000080080
[ 1.327033] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.327034] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.327034] usb usb4: Product: xHCI Host Controller
[ 1.327035] usb usb4: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 xhci-hcd
[ 1.327036] usb usb4: SerialNumber: 0000:03:00.0
[ 1.327129] hub 4-0:1.0: USB hub found
[ 1.327137] hub 4-0:1.0: 1 port detected
[ 1.327206] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.327210] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.327227] ehci-pci 0000:00:1d.0: debug port 2
[ 1.327228] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.327230] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
[ 1.327232] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[ 1.327248] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.327264] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 1.327264] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.327265] usb usb6: Product: xHCI Host Controller
[ 1.327266] usb usb6: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 xhci-hcd
[ 1.327267] usb usb6: SerialNumber: 0000:03:00.0
[ 1.327350] hub 6-0:1.0: USB hub found
[ 1.327363] hub 6-0:1.0: 4 ports detected
[ 1.331136] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.331146] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7417000
[ 1.337589] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.337666] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.337667] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.337668] usb usb5: Product: EHCI Host Controller
[ 1.337669] usb usb5: Manufacturer: Linux 5.6.7-towo.1-siduction-amd64 ehci_hcd
[ 1.337670] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.337795] hub 5-0:1.0: USB hub found
[ 1.337801] hub 5-0:1.0: 2 ports detected
[ 1.338894] atl1c 0000:06:00.0: version 1.0.1.1-NAPI
[ 1.340020] atl1c 0000:06:00.0 enp6s0: renamed from eth0
[ 1.341019] scsi host0: ahci
[ 1.341163] scsi host1: ahci
[ 1.341283] scsi host2: ahci
[ 1.341365] scsi host3: ahci
[ 1.341429] scsi host4: ahci
[ 1.341494] scsi host5: ahci
[ 1.341528] ata1: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416100 irq 32
[ 1.341530] ata2: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416180 irq 32
[ 1.341531] ata3: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416200 irq 32
[ 1.341532] ata4: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416280 irq 32
[ 1.341533] ata5: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416300 irq 32
[ 1.341535] ata6: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416380 irq 32
[ 1.341689] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.341691] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.341843] scsi host6: ahci
[ 1.341896] scsi host7: ahci
[ 1.341924] ata7: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110100 irq 34
[ 1.341926] ata8: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110180 irq 34
[ 1.635596] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.647422] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.647426] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.647475] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.647476] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.647495] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.647510] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.647531] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.647723] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.647759] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.647812] ata1.00: supports DRM functions and may not be fully accessible
[ 1.647846] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.647878] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.648225] ata4.00: ATA-8: ST3000DM001-1CH166, CC43, max UDMA/133
[ 1.648228] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.648716] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.648767] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.649113] ata4.00: configured for UDMA/133
[ 1.650544] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.650584] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.650766] ata5.00: HPA detected: current 488395055, native 488397168
[ 1.650930] ata5.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
[ 1.650932] ata5.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.651594] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.651597] usb 4-1: new high-speed USB device number 2 using xhci_hcd
[ 1.653821] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.653856] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.654030] ata2.00: HPA detected: current 1953523055, native 1953525168
[ 1.654180] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 1.654181] ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.655036] ata1.00: disabling queued TRIM support
[ 1.655039] ata1.00: ATA-9: Samsung SSD 850 EVO 1TB, EMT02B6Q, max UDMA/133
[ 1.655041] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.655306] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.656315] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.656350] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.656383] ata3.00: supports DRM functions and may not be fully accessible
[ 1.656448] ata3.00: ATA-10: CT2000MX500SSD1, M3CR023, max UDMA/133
[ 1.656449] ata3.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.657495] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.657558] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.657595] ata3.00: supports DRM functions and may not be fully accessible
[ 1.658218] ata3.00: configured for UDMA/133
[ 1.660607] usb 5-1: new high-speed USB device number 2 using ehci-pci
[ 1.660660] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.660714] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.660945] ata2.00: configured for UDMA/133
[ 1.662380] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.662444] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.662513] ata1.00: supports DRM functions and may not be fully accessible
[ 1.663871] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.663906] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.664032] ata6.00: HPA detected: current 976771055, native 976773168
[ 1.664111] ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
[ 1.664114] ata6.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.664701] usb 4-1: New USB device found, idVendor=2109, idProduct=0811, bcdDevice= 2.00
[ 1.664703] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.664705] usb 4-1: Product: USB2.0 Hub
[ 1.665566] hub 4-1:1.0: USB hub found
[ 1.665709] hub 4-1:1.0: 4 ports detected
[ 1.666137] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.666180] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.666381] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.666384] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.666482] ata6.00: configured for UDMA/133
[ 1.666626] hub 2-1:1.0: USB hub found
[ 1.666720] hub 2-1:1.0: 6 ports detected
[ 1.669630] ata1.00: disabling queued TRIM support
[ 1.673823] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.673879] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.674106] ata5.00: configured for UDMA/133
[ 1.675224] usb 5-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.675226] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.675459] hub 5-1:1.0: USB hub found
[ 1.675561] hub 5-1:1.0: 8 ports detected
[ 1.676800] ata1.00: configured for UDMA/133
[ 1.676880] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 1.677118] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1113 PQ: 0 ANSI: 5
[ 1.677294] scsi 2:0:0:0: Direct-Access ATA CT2000MX500SSD1 023 PQ: 0 ANSI: 5
[ 1.677489] scsi 3:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC43 PQ: 0 ANSI: 5
[ 1.677678] scsi 4:0:0:0: Direct-Access ATA SAMSUNG SP2504C 0-41 PQ: 0 ANSI: 5
[ 1.677821] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ 0-10 PQ: 0 ANSI: 5
[ 1.677966] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.677976] sd 0:0:0:0: [sda] Write Protect is off
[ 1.677978] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.677996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.678021] sd 1:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.678027] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.678028] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.678038] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.678070] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.678071] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 1.678082] sd 5:0:0:0: [sdf] 976771055 512-byte logical blocks: (500 GB/466 GiB)
[ 1.678088] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.678089] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.678089] sd 5:0:0:0: [sdf] Write Protect is off
[ 1.678090] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 1.678094] sd 4:0:0:0: [sde] 488395055 512-byte logical blocks: (250 GB/233 GiB)
[ 1.678103] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.678103] sd 4:0:0:0: [sde] Write Protect is off
[ 1.678105] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.678114] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.678120] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.678134] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.678135] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.678143] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.678144] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.678154] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.687283] sda: sda1 sda2 sda3 < sda5 > sda4
[ 1.687582] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.689041] sdc: sdc1
[ 1.689247] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.694870] sdd: sdd1 sdd3
[ 1.695149] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.695912] sdb: sdb1
[ 1.696120] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.697237] sde: sde1
[ 1.697414] sd 4:0:0:0: [sde] Attached SCSI disk
[ 1.748096] usb 1-1: New USB device found, idVendor=0bda, idProduct=0301, bcdDevice= 1.27
[ 1.748098] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.748099] usb 1-1: Product: USB3.0 Card Reader
[ 1.748099] usb 1-1: Manufacturer: Realtek
[ 1.748100] usb 1-1: SerialNumber: 201407140001
[ 1.756222] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 1.756415] scsi host8: usb-storage 1-1:1.0
[ 1.756487] usbcore: registered new interface driver usb-storage
[ 1.756833] usbcore: registered new interface driver uas
[ 1.778894] sdf: sdf1 sdf2 sdf3 < sdf5 sdf6 sdf7 sdf8 sdf9 >
[ 1.779350] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 1.868588] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.880966] usb 1-4: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 1.880968] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.881286] hub 1-4:1.0: USB hub found
[ 1.881345] hub 1-4:1.0: 4 ports detected
[ 1.953600] usb 5-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.969681] usb 5-1.5: New USB device found, idVendor=058f, idProduct=6377, bcdDevice= 1.00
[ 1.969684] usb 5-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.969686] usb 5-1.5: Product: Mass Storage Device
[ 1.969688] usb 5-1.5: Manufacturer: Generic
[ 1.969689] usb 5-1.5: SerialNumber: 920321111113
[ 1.969942] usb-storage 5-1.5:1.0: USB Mass Storage device detected
[ 1.970075] scsi host9: usb-storage 5-1.5:1.0
[ 2.097598] tsc: Refined TSC clocksource calibration: 3203.150 MHz
[ 2.097602] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e2be9e3e22, max_idle_ns: 440795311167 ns
[ 2.097651] clocksource: Switched to clocksource tsc
[ 2.165598] usb 1-4.4: new full-speed USB device number 4 using xhci_hcd
[ 2.254515] usb 1-4.4: New USB device found, idVendor=0557, idProduct=8021, bcdDevice= 1.00
[ 2.254516] usb 1-4.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.257102] hub 1-4.4:1.0: USB hub found
[ 2.257229] hub 1-4.4:1.0: 4 ports detected
[ 2.529593] usb 1-4.4.1: new full-speed USB device number 5 using xhci_hcd
[ 2.622918] usb 1-4.4.1: New USB device found, idVendor=04f3, idProduct=0103, bcdDevice= 1.07
[ 2.622922] usb 1-4.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.639131] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.1/1-4.4.1:1.0/0003:04F3:0103.0001/input/input5
[ 2.639197] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-4.4.1/input0
[ 2.648588] input: HID 04f3:0103 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.1/1-4.4.1:1.1/0003:04F3:0103.0002/input/input6
[ 2.648622] input: HID 04f3:0103 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.1/1-4.4.1:1.1/0003:04F3:0103.0002/input/input7
[ 2.648669] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:14.0-4.4.1/input1
[ 2.657380] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.1/1-4.4.1:1.2/0003:04F3:0103.0003/input/input8
[ 2.657700] hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Mouse [HID 04f3:0103] on usb-0000:00:14.0-4.4.1/input2
[ 2.816851] scsi 8:0:0:0: Direct-Access Generic- USB3.0 CRW-CF/MD 1.00 PQ: 0 ANSI: 4
[ 2.830129] scsi 8:0:0:1: Direct-Access Generic- USB3.0 CRW-SM/xD 1.00 PQ: 0 ANSI: 4
[ 2.843339] scsi 8:0:0:2: Direct-Access Generic- USB3.0 CRW-SD 1.00 PQ: 0 ANSI: 4
[ 2.856521] scsi 8:0:0:3: Direct-Access Generic- USB3.0 CRW-MS 1.00 PQ: 0 ANSI: 4
[ 2.869803] scsi 8:0:0:4: Direct-Access Generic- USB3.0 CRW-SD/MS 1.00 PQ: 0 ANSI: 4
[ 2.883127] sd 8:0:0:1: [sdh] Attached SCSI removable disk
[ 2.891972] sd 8:0:0:3: [sdj] Attached SCSI removable disk
[ 2.897200] sd 8:0:0:0: [sdg] Attached SCSI removable disk
[ 2.904604] sd 8:0:0:4: [sdk] Attached SCSI removable disk
[ 2.910213] sd 8:0:0:2: [sdi] Attached SCSI removable disk
[ 2.994680] scsi 9:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.995610] scsi 9:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.996203] scsi 9:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.996836] scsi 9:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.007937] sd 9:0:0:3: [sdo] Attached SCSI removable disk
[ 3.010086] sd 9:0:0:0: [sdl] Attached SCSI removable disk
[ 3.012040] sd 9:0:0:1: [sdm] Attached SCSI removable disk
[ 3.014577] sd 9:0:0:2: [sdn] Attached SCSI removable disk
[ 3.046675] async_tx: api initialized (async)
[ 3.885874] process '/usr/bin/fstype' started with executable stack
[ 3.917415] PM: Image not found (code -22)
[ 3.973128] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.054256] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 6.247203] systemd[1]: systemd 245.5-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 6.258699] systemd[1]: Detected architecture x86-64.
[ 6.279022] systemd[1]: Set hostname to <silverbox>.
[ 6.411138] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 6.472499] systemd[1]: Unnecessary job for /dev/mapper/desktop-usr was removed.
[ 6.473363] systemd[1]: Created slice system-getty.slice.
[ 6.473582] systemd[1]: Created slice system-modprobe.slice.
[ 6.473763] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.473976] systemd[1]: Created slice User and Session Slice.
[ 6.474050] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.474240] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.474335] systemd[1]: Reached target Slices.
[ 6.474378] systemd[1]: Reached target System Time Set.
[ 6.474423] systemd[1]: Reached target System Time Synchronized.
[ 6.474530] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.474641] systemd[1]: Listening on LVM2 poll daemon socket.
[ 6.477471] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 6.478894] systemd[1]: Listening on Process Core Dump Socket.
[ 6.478990] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.479077] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 6.479298] systemd[1]: Listening on Journal Audit Socket.
[ 6.480194] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.481150] systemd[1]: Listening on Journal Socket.
[ 6.482092] systemd[1]: Listening on udev Control Socket.
[ 6.482914] systemd[1]: Listening on udev Kernel Socket.
[ 6.484350] systemd[1]: Mounting Huge Pages File System...
[ 6.485275] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.486077] systemd[1]: Mounting RPC Pipe File System...
[ 6.487419] systemd[1]: Mounting Kernel Debug File System...
[ 6.488219] systemd[1]: Mounting Kernel Trace File System...
[ 6.489114] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 6.489715] systemd[1]: Starting Availability of block devices...
[ 6.490483] systemd[1]: Starting Set the console keyboard layout...
[ 6.491786] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 6.492531] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 6.496321] systemd[1]: Starting Load Kernel Module drm...
[ 6.496996] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 6.497033] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 6.498022] systemd[1]: Starting Journal Service...
[ 6.499684] systemd[1]: Starting Load Kernel Modules...
[ 6.500496] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.501109] systemd[1]: Starting udev Coldplug all Devices...
[ 6.512925] systemd[1]: Mounted Huge Pages File System.
[ 6.518452] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.518644] systemd[1]: Mounted Kernel Debug File System.
[ 6.518804] systemd[1]: Mounted Kernel Trace File System.
[ 6.519201] RPC: Registered named UNIX socket transport module.
[ 6.519201] RPC: Registered udp transport module.
[ 6.519202] RPC: Registered tcp transport module.
[ 6.519202] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.522704] systemd[1]: Finished Availability of block devices.
[ 6.523893] systemd[1]: Mounted RPC Pipe File System.
[ 6.523922] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 6.524932] systemd[1]: Finished Set the console keyboard layout.
[ 6.525261] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 6.525404] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 6.526180] systemd[1]: modprobe@drm.service: Succeeded.
[ 6.526455] systemd[1]: Finished Load Kernel Module drm.
[ 6.526894] lp: driver loaded but no devices found
[ 6.526949] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 6.528331] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 6.528953] systemd[1]: Starting Create System Users...
[ 6.533662] ppdev: user-space parallel port driver
[ 6.540188] fuse: init (API version 7.31)
[ 6.540206] *** VALIDATE fuseblk ***
[ 6.540208] *** VALIDATE fuse ***
[ 6.543748] systemd[1]: Finished Create System Users.
[ 6.544575] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.557838] systemd[1]: Finished Load Kernel Modules.
[ 6.558731] systemd[1]: Mounting FUSE Control File System...
[ 6.558835] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 6.560693] systemd[1]: Starting Apply Kernel Variables...
[ 6.566704] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 6.566922] systemd[1]: Mounted FUSE Control File System.
[ 6.567566] systemd[1]: Condition check resulted in VMware vmblock fuse mount being skipped.
[ 6.568821] systemd[1]: Starting udev Kernel Device Manager...
[ 6.569279] systemd[1]: Finished Apply Kernel Variables.
[ 6.592675] systemd[1]: Finished udev Coldplug all Devices.
[ 6.593697] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 6.599172] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 6.623940] systemd[1]: Started udev Kernel Device Manager.
[ 6.624703] systemd[1]: Starting Show Plymouth Boot Screen...
[ 6.644458] systemd[1]: Started Show Plymouth Boot Screen.
[ 6.644642] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 6.644730] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 6.644759] systemd[1]: Reached target Local Encrypted Volumes.
[ 6.652259] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 6.652470] systemd[1]: Reached target Local File Systems (Pre).
[ 6.726925] EDAC ie31200: No ECC support
[ 6.760461] iTCO_vendor_support: vendor-support=0
[ 6.762215] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.762541] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 6.767145] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.767172] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.767195] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.767217] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.767245] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 6.767266] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 6.767288] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 6.767308] sd 8:0:0:1: Attached scsi generic sg7 type 0
[ 6.767329] sd 8:0:0:2: Attached scsi generic sg8 type 0
[ 6.767349] sd 8:0:0:3: Attached scsi generic sg9 type 0
[ 6.767369] sd 8:0:0:4: Attached scsi generic sg10 type 0
[ 6.767392] sd 9:0:0:0: Attached scsi generic sg11 type 0
[ 6.767411] sd 9:0:0:1: Attached scsi generic sg12 type 0
[ 6.767432] sd 9:0:0:2: Attached scsi generic sg13 type 0
[ 6.767450] sd 9:0:0:3: Attached scsi generic sg14 type 0
[ 6.803114] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 6.803330] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 6.803357] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.803361] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 6.841476] MXM: GUID detected in BIOS
[ 6.841599] checking generic (f1000000 500000) vs hw (e0000000 10000000)
[ 6.841600] checking generic (f1000000 500000) vs hw (f0000000 2000000)
[ 6.841601] fb0: switching to nouveaufb from EFI VGA
[ 6.842183] Console: switching to colour dummy device 80x25
[ 6.842278] nouveau 0000:01:00.0: NVIDIA GP106 (136000a1)
[ 6.843235] snd_hda_codec_via hdaudioC0D2: autoconfig for VT2020: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[ 6.843237] snd_hda_codec_via hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.843238] snd_hda_codec_via hdaudioC0D2: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[ 6.843239] snd_hda_codec_via hdaudioC0D2: mono: mono_out=0x0
[ 6.843239] snd_hda_codec_via hdaudioC0D2: dig-out=0x2d/0x2e
[ 6.843240] snd_hda_codec_via hdaudioC0D2: inputs:
[ 6.843241] snd_hda_codec_via hdaudioC0D2: Front Mic=0x29
[ 6.843242] snd_hda_codec_via hdaudioC0D2: Rear Mic=0x2b
[ 6.843243] snd_hda_codec_via hdaudioC0D2: Line=0x2a
[ 6.852991] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 6.853027] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 6.853057] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 6.853087] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 6.853122] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 6.853158] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 6.853192] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 6.854040] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.854072] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.854100] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 6.854129] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 6.854157] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 6.854186] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 6.854215] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 6.854243] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 6.884042] systemd[1]: Started Journal Service.
[ 6.888320] input: PC Speaker as /devices/platform/pcspkr/input/input24
[ 7.093238] nouveau 0000:01:00.0: bios: version 86.06.63.00.e0
[ 7.135521] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/nvdec/scrubber.bin
[ 7.137835] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/bl.bin
[ 7.138714] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/ucode_load.bin
[ 7.140955] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/unload_bl.bin
[ 7.142070] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/ucode_unload.bin
[ 7.145947] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_bl.bin
[ 7.147020] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_inst.bin
[ 7.147949] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_data.bin
[ 7.148862] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_sig.bin
[ 7.149632] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_bl.bin
[ 7.150105] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_inst.bin
[ 7.150496] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_data.bin
[ 7.151618] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_sig.bin
[ 7.152356] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_nonctx.bin
[ 7.153101] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_ctx.bin
[ 7.153851] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_bundle_init.bin
[ 7.154444] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_method_init.bin
[ 7.155970] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/sig-1.bin
[ 7.156373] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/image-1.bin
[ 7.156521] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/desc-1.bin
[ 7.156804] nouveau 0000:01:00.0: fb: 6144 MiB GDDR5
[ 7.163507] intel_rapl_common: Found RAPL domain package
[ 7.163508] intel_rapl_common: Found RAPL domain core
[ 7.176674] [TTM] Zone kernel: Available graphics memory: 16457014 KiB
[ 7.176675] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 7.176676] [TTM] Initializing pool allocator
[ 7.176678] [TTM] Initializing DMA pool allocator
[ 7.176691] nouveau 0000:01:00.0: DRM: VRAM: 6144 MiB
[ 7.176692] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[ 7.176694] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 7.176695] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 7.177097] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 7.177098] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 7.177100] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f42 04620030
[ 7.177101] nouveau 0000:01:00.0: DRM: DCB outp 01: 04811f96 04600020
[ 7.177102] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011f92 04620020
[ 7.177103] nouveau 0000:01:00.0: DRM: DCB outp 03: 04822f86 04600010
[ 7.177104] nouveau 0000:01:00.0: DRM: DCB outp 04: 04022f82 04620010
[ 7.177104] nouveau 0000:01:00.0: DRM: DCB outp 06: 02033f62 04620010
[ 7.177105] nouveau 0000:01:00.0: DRM: DCB outp 08: 02044f72 00020020
[ 7.177106] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
[ 7.177107] nouveau 0000:01:00.0: DRM: DCB conn 01: 02000146
[ 7.177108] nouveau 0000:01:00.0: DRM: DCB conn 02: 01000246
[ 7.177109] nouveau 0000:01:00.0: DRM: DCB conn 03: 00010361
[ 7.177109] nouveau 0000:01:00.0: DRM: DCB conn 04: 00020461
[ 7.177714] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 7.234777] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[ 7.234795] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.234795] [drm] Driver supports precise vblank timestamp query.
[ 7.248680] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 7.250154] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 7.252277] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem
[ 7.264959] systemd-journald[524]: Received client request to flush runtime journal.
[ 7.266386] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 7.525589] Adding 2048252k swap on /dev/sdf7. Priority:-2 extents:1 across:2048252k
[ 7.555490] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.662711] nouveau 0000:01:00.0: DVI-D-1: EDID is invalid:
[ 7.662715] [00] GOOD 00 ff ff ff ff ff ff 00 04 68 fa 00 00 00 00 00
[ 7.662715] [00] GOOD 28 15 01 03 a5 3c 22 78 22 6f b1 a7 55 4c 9e 25
[ 7.662716] [00] GOOD 0c 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
[ 7.662716] [00] GOOD 01 01 01 01 01 01 56 5e 00 a0 a0 a0 29 50 30 20
[ 7.662716] [00] GOOD 35 00 55 50 21 00 00 1a 00 00 00 fc 00 51 48 44
[ 7.662717] [00] GOOD 32 37 30 0a 20 20 20 20 20 20 00 00 00 fc 00 51
[ 7.662717] [00] GOOD 48 44 32 37 30 0a 20 20 20 20 20 20 00 00 00 fc
[ 7.662718] [00] GOOD 00 51 48 44 32 37 30 0a 20 20 20 20 20 20 01 b0
[ 7.662718] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.662719] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.662719] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.662720] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.662720] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.662721] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.662721] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.662721] [01] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.836823] Adding 14628860k swap on /dev/sdf1. Priority:-3 extents:1 across:14628860k
[ 7.865479] nouveau 0000:01:00.0: DRM: allocated 2560x1440 fb: 0x200000, bo 0000000001363efc
[ 7.874666] fbcon: nouveaudrmfb (fb0) is primary device
[ 8.016429] EXT4-fs (sdf6): warning: checktime reached, running e2fsck is recommended
[ 8.151357] Console: switching to colour frame buffer device 320x90
[ 8.389454] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
[ 8.394941] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 8.433730] EXT4-fs (dm-5): warning: mounting fs with errors, running e2fsck is recommended
[ 8.472929] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 8.499690] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.519088] FAT-fs (sdf8): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 9.155304] EXT4-fs (sdf6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.991466] atl1c 0000:06:00.0: atl1c: enp6s0 NIC Link is Up<1000 Mbps Full Duplex>Both are booting 5.6.7. Nothing changed between the two boots.
The first thing I notice (and already noticed a few days ago) are these suspicious "DRM: .. timeout" messages at the end of the "bad" boot. What little I found on google didn't suggest that those were a problem but seeing how they are absent in the "good" boot I suppose they might at least be an indicator of a problem. Sadly, there is a tiny chance that I just happened to execute dmesg too early for these to appear. They come in reasonably late as the timestamps show. Since I am unable to recreate another "good" boot at the moment I cannot say for sure that they are really absent in "good" boots.
Offline
Okay, I'm very confused now.
I dowgraded again, but this time, it didn't work.
I noticed that gdm behaves differently when it works vs. when it doesn't - if everything works, gdm is smooth, otherwise it's very laggy.
So I took my laptop out of the docking station before booting, and only reconnected it after launching i3. It works.
So I disabled gdm. Now it works.
Offline